Electrical engineer jobs in Myrtle Beach, SC

MMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and Validation. MMR has offices in Canada, USA, and Australia. This is an outstanding opportunity to join our growing team, where the successful candidate will work with a group of engineers involved in the design, project management, commissioning and start-up of various electrical systems (low, medium and high voltage) from design through to procurement, construction, commissioning, and turnover. This role shall work full time on-site. RESPONSIBILITIES Work as part of our customer's in-house engineering team, as an electrical systems engineer to support our customer with reviewing document designs/submittals from A/E firms, vendor shop drawings/specs/submittals, construction submittals to ensure owner's requirements are met. Oversee electrical projects end to end (from start to completion; i.e. design, procurement, construction, commissioning/startup, documentation support/close-out). Provide technical guidance into the design, project management, commissioning and validation, and start-up of various electrical equipment and systems. Review technical data sheets and drawings for various equipment, instrumentation, and systems with a variety of voltages (Low Voltage, and Medium Voltage systems) Perform field job walks, to review the progress / correctness of field activities Participate in commissioning & startup of electrical systems. Provide technical engineering guidance to junior engineers. Coordination with other engineering disciplines and other cross-functional departments (automation engineering, facilities engineering, process engineering, validation, project management, operations, quality, safety). Coordinate meetings with cross-functional departments, to drive project progress, facilitate decisions, and provide updates. Engage other departments, as required, into design reviews and decisions. Prepare, review, execute commissioning protocols, and reports. Work may require occasional support over shutdowns or extended hours, specifically during installation and commissioning / validation phases. The work will require working out of clients' facilities. As this position requires working on client sites, you will need to comply with the client's safety rules. Visit construction and installation sites, wear necessary safety PPE. Supervise contractors during critical installations of process equipment and associated utilities. Other duties assigned by client, and/or MMR, based on workload and project requirements. QUALIFICATIONS 6-8+ years of experience in electrical engineering and electrical construction. Will consider candidates with more experience as well for a Senior/SME Role. Knowledge of Low, Medium and High Voltage systems required. Possess leadership skills, and able to take initiative to lead projects, involving multiple stakeholders, departments, and varying complexity. Professional Eng. certification in NC is an asset, but not required. Send your resume to: ****************************** Compensation: Salary starting from 110k/year + benefits, or higher depending upon individual's experience Equal Employment Opportunity and Reasonable Accommodations MMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request.

DSJ Global is currently partnered with an award winning and fast-growing pharmaceutical manufacturing company who is looking to add a Principal Engineer to their team in Raleigh, NC. This position requires a highly skilled individual with extensive experience in process development, scale-up, and optimization of parenteral drug products. The ideal candidate will have strong leadership skills, technical expertise, and the ability to work cross-functionally to ensure the successful commercialization of complex drug products. Responsibilities: Driving end-to-end engineering projects from early-phase development through to commercialization, ensuring all deliverables meet company, regulatory, and customer requirements. Design, develop, and optimize manufacturing processes for parenteral drug products, focusing on efficiency, scalability, and compliance with regulatory standards (FDA, EMA, etc.). Provide in-depth technical expertise in the areas of drug product formulation, sterilization, filling, and packaging processes. Collaborate closely with R&D, Quality Assurance, Regulatory Affairs, and Manufacturing teams to ensure seamless project execution and troubleshooting of any issues. Ensure all engineering activities are performed in compliance with applicable regulatory requirements, industry standards, and quality systems. Identify and implement process improvements to enhance product quality, reduce production costs, and increase operational efficiency. Mentor and develop junior engineers, fostering a culture of continuous learning and professional development within the engineering team. Proactively identify potential risks in the manufacturing process and provide innovative solutions to mitigate them. Prepare and review technical documents, including specifications, reports, and process validation documents, to support regulatory filings and audits. Requirements: Bachelor's degree in Chemical Engineering, Biomedical Engineering, Mechanical Engineering, or a related field. Advanced degree (MS or PhD) in a relevant engineering or scientific discipline is preferred. At least 6 years of experience in the pharmaceutical industry, preferably sterile injectables Extensive knowledge of drug product development and manufacturing processes, including aseptic processing, filling, and packaging. Strong understanding of GMP (Good Manufacturing Practice), FDA regulations, and international guidelines. Expertise in process validation, process control systems, and equipment qualification. Six Sigma or Lean Manufacturing methodology knowledge. Certification is a plus.

Storage/Data Protection Opportunity Fort Mill, SC (3 Days Onsite) 12 Months Contract Core Responsibilities Design and implement storage infrastructure solutions: This includes traditional storage hardware, SAN (Storage Area Network), NAS (Network Attached Storage), and cloud storage. Cyber Vault Administration: Managing secure, isolated storage environments (often used for ransomware recovery). Air-Gapped Vault Workflows: Implementing systems that are physically or logically disconnected from the network to protect backups from cyberattacks. Backup and Data Protection: Ensuring data integrity, availability, and compliance. Business Continuity & Disaster Recovery: Planning and testing strategies to recover from outages or cyber incidents. Top Skills Experience Level 14+ years of professional experience in storage engineering or infrastructure roles. Technical Expertise Foundational Storage Knowledge: Understanding SAN, NAS, RAID, storage arrays, and performance tuning. Cyber Vault Experience: Familiarity with technologies like Dell Cyber Recovery, IBM Safeguarded Copy, or similar. Data Protection Practices: Backup strategies, replication, snapshot management, and compliance standards. Air-Gapped Ransomware Protection: Designing workflows that isolate backups from production environments. Related Technologies Hypervisors: VMware, Hyper-V. Cloud Solutions: AWS, Azure, or other cloud storage platforms. General Server & Networking Knowledge: Not deep networking, but enough to integrate storage with infrastructure. Security & Compliance Knowledge of ransomware mitigation techniques, encryption, and regulatory compliance (e.g., HIPAA, GDPR). Soft Skills Problem-solving and troubleshooting in complex environments. Documentation and process design for disaster recovery.

IT Project Engineer (Azure / Windows / VMware Optomi, in partnership with a growing managed services organization, is seeking a Senior IT Project Engineer to design, implement, and support complex IT projects for enterprise and SMB clients. This is a senior-level, hands-on, client-facing role that requires strong technical expertise across infrastructure, networking, cloud services, and security. The ideal candidate is comfortable owning projects end to end, communicating directly with clients, and delivering reliable, well-documented solutions aligned with security and best practices. What the Right Candidate Will Enjoy Leading and executing end-to-end IT infrastructure and cloud projects Working directly with clients and stakeholders in a managed services environment Hands-on involvement with Azure, Microsoft 365, networking, and security technologies Joining a tight-knit, collaborative team with strong values and long-term tenure Experience of the Right Candidate Bachelor's degree in Computer Science, Information Technology, or related discipline, or equivalent hands-on experience Strong Azure expertise Experience with firewalls, VLANs, and VPN configuration/troubleshooting Experience with email migrations, including tenant-to-tenant Microsoft migrations Virtualization experience with VMware and/or Hyper-V Experience troubleshooting messaging issues, including email message tracing Familiarity with IT Glue, ConnectWise, and structured project documentation Ability to prioritize effectively and work in a project-driven, team-based environment Senior-level experience delivering complex IT projects in a managed services or consulting environment Strong expertise in Microsoft 365, Azure, and infrastructure design Experience with server, network, firewall, VPN, backup, and disaster recovery solutions Proven ability to operate in client-facing roles, explaining technical concepts clearly and professionally Experience following change control, documentation, and implementation methodologies Strong communication, organization, and time management skills Ability to manage multiple projects, meet deadlines, and deliver within budget Responsibilities of the Right Candidate Review project scopes and participate in technical pre-sales discussions Provide input on timelines, hardware/software requirements, and implementation strategy Design infrastructure and network solutions aligned with security best practices and client needs Execute IT projects including but not limited to: Microsoft 365 and Azure migrations SharePoint setup and data migrations Server and network infrastructure deployments Firewall and VPN installations Backup, disaster recovery, and security solution rollouts Ensure smooth handoff to service desk and proactive support teams Adhere to change control, implementation, and documentation procedures Act as the primary technical resource during project kickoff and status meetings Provide regular updates and coordinate with operations and client stakeholders Deliver end-user training or documentation as required Maintain complete project documentation in IT Glue and ConnectWise Ensure configurations, credentials, and diagrams are accurately recorded Conduct thorough internal handoffs to service teams

Notes: Fully Onsite Open for candidates with experience with project engineering and coordination experience Top 3 Must Have Skill Sets: 1. Ability to work well under pressure 2. Facilities knowledge and experience 3. Great communication skills 4. Proactive 5. Willingness to learn new experiences Job Details: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for facilities related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for facilities system, perform quality and overall facilities walkdowns. Perform field evaluations of existing systems and provide engineering design recommendations. Skills: self-started, ability to communicate effectively, manage tasks to completion. Experience with facilities management and projects is a must. Basic Qualifications Master degree OR Bachelor degree and 2 years of experience OR Associate degree and 6 years of experience OR High school diploma / GED and 8 years of experience

Automation and Controls Engineer At Adecco, we're proud to partner with a global leader in appliance innovation that is shaping the future of sustainable living. As part of our team, you'll help develop forward-thinking manufacturing solutions that make a real impact-driving innovation, efficiency, and quality across modern production environments. We believe diverse perspectives create stronger teams and more creative solutions. Join a collaborative environment where your ideas are valued, your voice is heard, and your professional growth is supported every step of the way. About the Role We're seeking a skilled Automation and Controls Engineer to join our team onsite in Anderson, SC. In this role, you'll report to the Industrial Engineering Manager and work closely with cross-functional teams and global project partners to implement advanced data-driven manufacturing solutions. You'll help advance Industry 4.0 initiatives-turning data into actionable insights and driving automation, digitalization, and process improvement across the plant. What You'll Do Lead assigned manufacturing engineering and new product industrialization projects. Develop and communicate best practices and new standards across project teams and suppliers. Partner with engineering, IT, and digital teams to support new technology and automation projects. Contribute to key factory metrics, including Quality, Cost, and Delivery goals. Implement digital manufacturing and automation solutions that enhance productivity. Develop and maintain automation architectures aligned with “Fitness for Automation” principles. Troubleshoot and resolve challenges related to OT systems and equipment connectivity. Define, manage, and maintain PLC and HMI systems based on global standards. Ensure documentation, training materials, and reference guides are accurate and current. Oversee compliance with global OT standards for cybersecurity and connectivity. Act as a subject matter expert in electrical, controls, and automation systems. Support equipment startup and integration with MES systems. Identify and lead process control improvements through automation. Prepare technical specifications for new equipment in alignment with Manufacturing Engineering guidelines. Who You Are A proactive problem-solver who delivers results efficiently. A collaborator who builds trust and communicates clearly across teams. A strategic thinker who balances technical and business priorities. An organized professional with a methodical approach to achieving goals. An innovator with the vision to drive continuous improvement and influence others to do the same. Qualifications Bachelor's Degree (or higher) in Engineering, or Associate's Degree with relevant experience. 5+ years of experience as a Controls Engineer or Systems Integrator. 5+ years of experience in a manufacturing environment. Expertise with robotics, conveyors, industrial systems, and process automation. Proficiency in PLC/HMI and SCADA programming and integration. Experience with Siemens PLC programming (S7-300, S7-400, and 1500), Simatic Manager, and TIA Portal. Knowledge of control system communication protocols (Profinet, Profibus, AS-I, Ethernet, DeviceNet). Familiarity with Banner Safety PLCs and SICK light curtains is preferred. Pay Details: $37.00 to $57.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

We are seeking an experienced Transmission Line Engineer to support power transmission and substation projects within the electrical utility and power delivery sector. This role requires strong technical expertise in high-voltage transmission line engineering, the ability to work independently on complex design challenges, and direct collaboration with clients and internal engineering teams. Key responsibilities include: Provide engineering and technical guidance in the identification, analysis, and resolution of complex transmission and substation-related challenges Plan, organize, estimate, schedule, and monitor engineering work activities Prepare thorough, accurate, and timely technical reports, calculations, sketches, and project documentation Develop and review transmission line drawing packages Monitor project deliverables and schedules, presenting solutions and recommendations to clients Interact daily with client engineers and technical personnel Build and maintain strong professional relationships with customers Support organizational goals and represent the company in a professional manner Continuously improve engineering knowledge, skills, and performance Perform additional duties as assigned by management Qualifications: Bachelor's degree in Engineering from an ABET-accredited institution 5-7 years of engineering experience within the electrical utility or power delivery industry Strong written and verbal communication skills Ability to work independently with minimal supervision Experience interpreting technical documentation, drawings, and specifications Professional Engineer (PE) license preferred Desired experience and skills: Degree in Civil/Structural or Electrical Engineering Professional Engineer registration with NCEES record Experience designing high-voltage transmission lines (69kV and above) Technical competency across transmission line design, including structures, foundations, grounding, lightning protection, sag and tension analysis, and material selection Experience producing complete design packages, including drawings, bills of material, and construction specifications Working knowledge of applicable industry standards such as NESC, ASCE, ACI, and IEEE Hands-on experience with PLS-CADD, PLS-POLE, MFAD, and cost estimating tools Ability to mentor junior engineers and support cross-disciplinary collaboration Experience supporting construction activities, site visits, and resolving field issues General project coordination and task management experience Support permitting-related design activities Work environment and physical considerations: Primarily office-based with occasional site visits Moderate noise environment typical of professional office settings Periodic exposure to outdoor conditions and electrical risk during site work Ability to perform tasks requiring standard physical activity associated with engineering field support

Leeds Professional Resources (A leader in Construction Recruitment) is working with a leading mechanical contractor specializing in commercial HVAC, plumbing, and piping systems. We deliver high-quality mechanical solutions for projects in healthcare, education, industrial, and commercial markets. Our team is dedicated to safety, precision, and exceptional client service. Position Overview: We are seeking a motivated Commercial Project Engineer to support our project management and field operations teams. The ideal candidate will have 1-2 years of experience working with either a commercial general contractor or a mechanical contractor. This role offers an excellent opportunity to grow into project management within the commercial mechanical industry. Key Responsibilities: Assist Project Managers with the planning, scheduling, and coordination of mechanical construction projects. Review project plans, specifications, and submittals to ensure compliance and accuracy. Track and document RFIs, submittals, change orders, and material procurement. Support project budgeting, cost tracking, and schedule management. Coordinate with field teams, subcontractors, and vendors to ensure smooth project execution. Assist in project closeout activities, including punch list completion and documentation. Participate in on-site meetings and provide technical support as needed. Qualifications: Bachelor's degree in Mechanical Engineering, Construction Management, or a related field (preferred). 1-2 years of experience working with a commercial general contractor or commercial mechanical contractor. Basic understanding of mechanical systems (HVAC, plumbing, piping). Strong communication and organizational skills. Proficiency in Microsoft Office and construction management software (e.g., Bluebeam, Procore, or similar). Detail-oriented with the ability to handle multiple tasks in a fast-paced environment.

The ideal candidate will be responsible for assisting the Project Manager, Superintendent, and Project Team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. In order to be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion. Responsibilities Assist office and on-site management to ensure project success Ensure project plan is moving forward to meet anticipated deadlines Prepare RFI's & Submittal's and material takeoffs Processes material receiving documentation and assist cost coding Maintain accurate and updated logs for weekly progress tracking Qualifications Bachelor's degree in Mech/Civil Engineering, Construction Management, or equivalent experience 1 - 3 years' of experience as a Project Engineer Intern or other construction related fields Ability to learn construction technology software i.e. Bluebeam, Procore, P6, and Microsoft Office Familiarity with safety rules, regulations, best practices and QA/QC performance standards Prior Water & Wastewater knowledge or work experience preferred

We are seeking a motivated and detail-oriented Project Engineer to join our dynamic team. The ideal candidate will play a pivotal role in overseeing various construction projects from inception to completion, ensuring that all aspects are executed efficiently and effectively. This position requires strong project management skills, proficiency in construction management software, and a solid understanding of engineering principles. Your responsibilities in this role: Maintain contract documents, posting and distribution of addenda, field orders, RFI's and Requests for Proposal Control shop drawings and submittals to review for contract compliance and establish a routing process to ensure that all involved in the work are kept informed Lead the project QC including all deviation reports, pre-pour inspections, completion lists, testing reports, etc. and actively update the Project Manager and Superintendent Coordinate Requests for Information to and from architectural engineer, owner and other contractors and subcontractors Assist in assembling proposals and prepare owner change order requests Maintain “As-Built” drawings; prepare final close out sets Secure operations manuals guarantee and warranties; assist in project close-out What you need to qualify: 1-3 years of relative job experience in commercial construction highly preferred BS degree in Construction Management or Engineering Thorough understanding of industry practices and standards Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam) Highly collaborative work style with excellent communication skills Join us as we build innovative solutions in the construction industry! LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Assists the Project Engineer with being the technical source of information for the project. Responds to questions about drawings, specifications, shop drawings, and change orders and have responsibility for assisting in writing change orders, RFl's, meeting minutes, and reviewing Submittals. Maintains an effective and professional working relationship with owners, architects, engineers, subcontractors, and suppliers. This position includes three 'steps' (I, II and Senior), which provide for a progression of skill and experience. Step I is the entry level for individuals with a minimum of experience in this position. Step II is used for employees with 2 years of experience in this position, or with experience on larger and more complex projects. The 'Senior' step is used for employees with more than 4 years of experience and/or experience on significantly larger or more complex projects. Key Responsibilities 1. Assists Project Engineer in developing and maintaining as-built drawings and other work tasks and assists with or reviews and processes submittals, change orders, RFl's, and budget forecasting. Ensures the timely and appropriate generation, collection, distribution, storage, retrieval and ultimate disposition of meeting agendas, RFl's and daily reports. 2. Demonstrates an understanding of the project management plan (PMP) and is involved in support and execution of the plan. Demonstrates a thorough understanding of the change management process and performs project scope activities and supports the project team to ensure the work needed to complete the project successfully. 3. Ensures the administration of the project quality management plan and demonstrates and reinforces a culture of safety throughout the project. 4. May assist in the calculation of daily production rates and unit costs for self-performed work. Participates in risk management including identification, analysis, response planning and monitoring and control on a project and demonstrates competency in understanding the environmental control processes for the project and takes corrective actions when necessary. 5. May be responsible for overseeing/managing the BIM (Building Information Modeling) Coordination between Subcontractors and Designers. 6. May be responsible for the documentation and submittal for the LEED (Leadership in Energy and Environmental Design) Certification of a building and for creating and updating Digital Record Drawings (ORD). 7. May provide lines, grades and layout as required for the project while maintaining an organized log book. 8. May provide the following weekly quantities: maintains accurate quantity logs and reports quantities in compliance with the cost control manual. Completed logs are to be filed with the project files. Perform elements of the processes involved in budgeting and controlling costs so that the project can be completed within the approved budget. Demonstrates business acumen within area of responsibility. (Not all Field Engineers track quantities) 9. Provides support to superintendents required for the execution of the work and assists in the resolution of field problems as necessary. Minimum Job Requirements 1. Ability to assume responsibility, interface and communicate with others is essential. 2. Entry-level position that normally requires a four-year construction-related degree or equivalent technical/field experience. 3. Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) proficiency. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Job Description HIRING NOW-EXPERIENCED FIELD STACK TESTERS FOR ALL LOCATIONS ACROSS THE U.S. Anchorage, Alaska/ Atlanta, Georgia/ Bakersfield, California/ Baton Rouge, Louisiana/ Birmingham, Alabama/ Boston, Massachusetts/ Cedar Rapids, Iowa Charlotte, North Carolina / Cypress, California/ Dallas ,Texas/ Decatur, Alabama/ Denver, Colorado/ Evansville, Indiana/ Houston, Texas/ Jacksonville, Florida Kansas City, Kansas/ Little Rock, Arkansas/ Minneapolis, Minnesota/ Vancouver, Washington/ Philadelphia, Pennsylvania/ Phoenix, Arizona Pittsburgh, Pennsylvania/ Roanoke, Virginia/ Salt Lake City, Utah/ St. Louis, Missouri/ Syracuse, New York and Tampa Florida. Duties & Responsibilities: Support Stack Emissions Testing Operations Conduct onsite stack emissions testing, using proven competencies with wet chemistry and instrumental sampling methodologies Assist to Train and mentor Project Scientists (Field Technicians) on field procedures, test methods, calibrations, etc. using Alliance standardized training materials Motivate the team, and ensure productivity Supervise and reviews equipment calibrations for pivots, control modules and nozzles Assists with pricing and deliverables (proposal/test plans/reports) review Serves as the company's representative to interface with customers and regulatory (EPA) personnel Uphold the highest standards of data quality & ethics Requirements: Must have experience leading stack emissions testing projects in the field. Preferred experience with, client interface, safety leadership, data collection, quality initiatives and timely deliverables to the clients Specific knowledge of instrumental and wet chemistry equipment operation, troubleshooting and calibration required Flexibility to work 40+ hours per week as well as some overnight stays & travel will be required. Consistent standing or walking, bending, crouching, or stooping, climbing ladders and/or stairs, frequent lifting of objects weighing up to 50 pounds. Must be able to distinguish between shades of color Excellent communication skills (internally and with Clients and Regulators) with professional demeanor. Must maintain positive attitude with ability to work well in groups and desire to achieve goals and grow into higher positions of leadership. Valid driver's license Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired after July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this role can average between $60,000-$100,000 annually. The total compensation can include base salary, and bonus plans. The individual for this role must have hands-on experience as a field stack tester preferably with QSTI certifications in methods 1-4. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

We are seeking an Electrical & Systems Engineer to join our IndyCar team. This role is responsible for the design, implementation, and maintenance of all electronic systems and radio communications on the car. The successful candidate will contribute directly to on-track performance and will be involved in race operations, development testing, and engineering projects from concept to completion. Responsibilities Maintain and troubleshoot all electronic systems to ensure accurate and repeatable data collection at the track. Possess strong working knowledge of all car systems to quickly diagnose and resolve issues. Work with vendors to select and integrate sensors for on-car and test rig applications. Build and maintain timing stands and trackside equipment. Design and build test fixtures to support overall vehicle performance. Design and layout circuit boards for test and pit equipment. Support the Systems Engineering group with car setup and calibration. Assist in the setup and maintenance of timing stands and other trackside equipment. Develop and maintain trackside tools to aid in car calibration and race performance. Assist in the setup and operation of 2-way radio communication systems. Manage fuel economy during race weekends, using collected data to determine fuel consumption and provide pit windows to the race strategist. Participate in engineering meetings, race debriefs, and test reviews to identify development opportunities. Contribute to development and wind tunnel testing as required. Take ownership of defined development projects from concept through execution. Follow technical specifications outlined by technical bulletins and team car build requirements. Establish and document testing and calibration procedures. Collaborate with the broader engineering team to ensure effective communication and development. Take a hands-on approach, driving projects from design to completion. Qualifications Bachelor of Science in Electrical or Mechanical Engineering (Electrical Engineering preferred). Minimum 3.0 GPA. Motorsports engineering background preferred but not required (IndyCar, NASCAR, IMSA, WEC, or F1 experience a plus). Strong knowledge of circuit design, diagnostics, and layout. Familiarity with basic circuit wiring. Extensive knowledge of data acquisition, data analysis, and statistical analysis. Strong analytical and problem-solving skills with a focus on innovation and continuous improvement. Effective verbal and written communication skills. Ability to work collaboratively with cross-functional teams. Coding experience recommended. Desired / Preferred Qualifications Experience with data acquisition systems (Cosworth, CAN communication). Experience with Arduino, Raspberry Pi, or similar systems. Proficiency with MATLAB, LabVIEW, and CAD software (NX, CATIA, Pro/ENGINEER, SolidWorks). Experience with 2-way radio communication systems. Motorsport wiring experience. SharePoint knowledge. Proficiency with Microsoft Office Suite; Power BI experience desired. Strong interpersonal and communication skills.

Dorleco is a 360-degree controls software development & integration solution provider for electric and autonomous vehicle systems, focused on achieving its mission of developing sustainable & efficient vehicles with innovative, robust, and lean engineering practices. We provide a fast-paced R&D environment and deliver integrated solutions for mechanical, electrical, software, thermodynamic, and energy storage systems for modern electric and autonomous vehicle systems. We are a trusted resource for full-time projects, overflow work, training, and resident engineering needs for the larger companies ePowertrain and ADAS engineering departments. We are also a certified Minority Enterprise by NMSDC! We offer competitive salary and benefits plan including comprehensive relocation package, and great opportunities for career growth! Requirements: MUST be authorized to work in the United States for any employer. MUST be available to start working within 3 weeks of offer acceptance date. Job Description: As a Vehicle Electronics Engineer you will deliver vehicle functions, dynamics, and ADAS technical solutions by utilizing hardware and software currently in production or being developed on the next generation electronics platform. You will also be involved in modifying the vehicle functions fit the needs of the North American market. Responsibilities: Developing & maintaining product roadmaps for the areas of interest and aligning the same with Technology streams, brands and propose solutions. Playing an active role in benchmarking activities and performing gap analysis. Developing new hardware & software that is specific to North American markets. Detailing and specifying requirements to both internal & external suppliers. Planning and tracking the progress of the projects and managing risks, as necessary. Documenting design solutions to match the sales variants of the truck. Ensuring solutions are verified and validated against requirements. Validating and verifying that we meet applicable regulations for current and future years. Covering applicable market-specific and customer-specific needs. Respecting product positioning strategies and aligning at the best level amongst competitors. Developing solutions that are futuristic and scalable while keeping low costs a priority. Qualifications: Bachelors Degree in Electrical Engineering or related field. 5-8+years of experience in Embedded Software and/or Automotive Electronics. Truck or Passenger Auto Industry experience is strongly preferred. Ability to lead product development activities with cross functional teams, internal & external supplier teams from around the global. Experience in coaching and mentoring junior members of the team. Prior experience working with Body control modules, ABS, ADAS systems as a component owner. Knowledge of North American regulations applicable to commercial transportation would be a plus. Sound understanding of CAN & LIN networks & protocols. Ability to understand and break down system-level requirements into components and end-user functions. Expertise in design documentation and software configuration and linking them to sales variants or similar. Comfortable working with project management processes and agile large solution teams/ trains. To achieve your mission and build your network, you will also be traveling occasionally.

We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us - and will continue to allow us - to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description Imagine being part of a team that shapes the skyline and revolutionizes energy systems. As a summer 2026 engineering student intern with Olsson's Transmission (Power Delivery) team, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You could contribute to the intricate network of poles and wires crisscrossing the skies. Or assist with designing the robust, high-powered substations that are vital to our communities. Our work involves more than just improving the visual landscape; we upgrade electrical systems to meet future energy demands. From conception to completion, our skilled engineers and technicians bring these essential projects to life. You'll assist with project design using AutoCAD, perform research, write technical reports, and if needed, travel to job sites for observation. Join us in designing impactful, sustainable solutions, and take pride in driving by a project, knowing you played a key role in its creation. Olsson is not just engineering a brighter future; we're creating a legacy of excellence in power engineering, committed to quality and client satisfaction. Qualifications You are passionate about: Working collaboratively with others. Having ownership in the work you do. Using your talents to positively affect communities. You bring to the team: Strong communication skills Ability to contribute and work well on a team Pursuing a bachelor's degree in electrical or civil engineering Working knowledge of AutoCAD Proficiency in Microsoft Word, Excel, and Outlook Strong attention to detail Strong problem-solving and math skills #LI-DNI Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP) Engage in work that has a positive impact on communities Receive an excellent 401(k) match Participate in a wellness program promoting balanced lifestyles Benefit from a bonus system that rewards performance Have the possibility for flexible work arrangements Please note: The benefits listed above apply to full-time employees. If you're applying for an internship, you can learn more about internship-specific offerings and experiences at Olsson by visiting *********************************** Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Preferred Years Experience, Skills, Training, Education Experience working with a utility electrical system. Has passed the NCEES Fundamental of Engineering (FE) exam and has EIT professional credentials Experience with a municipality underground electrical system is highly preferred. Work Schedule Monday through Friday 7am-4pm

Job DescriptionProject Engineer - Civil, Industrial & Commercial Concrete 🏢 Company: Gregory Construction Gregory Construction, a Christian-principled, award-winning contractor, is seeking a Project Engineer to support civil, industrial, and commercial concrete projects across the Southeast. This role is essential in assisting project leadership to ensure work is executed safely, on time, within budget, and to Gregory's high standards of quality and integrity. Key Responsibilities: Provide engineering support to Superintendents and Project Managers in daily field operations. Review drawings, RFIs, and project documents to support accurate execution. Assist with purchase order requisitions, material tracking, and delivery coordination. Maintain project documentation, including daily reports, records, and files. Attend and contribute to project progress meetings. Monitor project schedules, costs, and resources to ensure deadlines and budgets are met. Support in maintaining safety, quality, and compliance standards on all project sites. Perform additional tasks as assigned to support project success. Qualifications: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Foundational knowledge of construction specifications, methods, and procedures. Ability to apply engineering principles to solve construction challenges. Strong organizational and communication skills. Previous construction internship, co-op, or field experience is a plus. Willingness to travel as needed for project assignments. Why Gregory Construction: Competitive pay, PTO, and company-paid health/dental/vision/life insurance. 401(k) with company match. Opportunities for mentorship, training, and career growth. Supportive, faith-based culture built on Safety, Integrity, Excellence, Communication, and Determination. Apply today to join Gregory Construction as a Project Engineer and grow your career with a respected leader in civil, industrial, and commercial construction. Powered by JazzHR eZsLOzMKYA

Cybersecurity Intern Pee Dee Electric - 9825 US-74, Lilesville, NC 28091 Division: BITS Summary Description: The Cybersecurity intern must be actively enrolled in a Cybersecurity or approved Computer Science Degree program with an emphasis on Cybersecurity. The interns will be exposed to cybersecurity tooling that is used by assigned electric cooperatives and will be taught how to respond to alerts as well as configuration changes and other adjustments as approved by assigned managers. Interns will learn about cybersecurity assessments and conduct mitigation and new assessments as required. There will be exposure and education to the importance of cybersecurity for day-to-day operations as well as long term impacts. The Cybersecurity intern will be encouraged to make pro-active recommendations as they learn the environment to help mature the existing cybersecurity program. Interns will also be responsible for creating a presentation at the end of the internship to demonstrate knowledge gained and benefit provided. Interns will also be responsible for completing any required work for credit within their degree program. Academic and Trade Qualifications: This internship program requires enrollment in an accredited university and active enrollment in a Cybersecurity or approved Computer Science Program with an emphasis on Cybersecurity. Work Experience: No prior industry work experience required. Experience contributing as a team member is desirable. Responsibilities: Meet with Pee Dee Electric to discuss project assignments, milestones, and deadlines. Work under the supervision of Pee Dee Electric staff member to complete project assignments. Apply technical problem-solving cybersecurity skills to recommend and implement improvements to existing processes. Responsible for making pro-active recommendations to any current cybersecurity environment. Communicating research and results to management through reports and development of presentations. Job Knowledge: The knowledge requirement for the intern program is what has been gained from the degree program enrolled up to the start of the internship. Abilities and Skills: A general understanding of computer hardware and software and the importance of securing information within business systems. A strong desire to expand knowledge and understanding around all things related to a formal cybersecurity program. A natural desire to be proactive when recognizing security gaps and a desire to work with a team. Relationships and Contacts: Reports to: Director of Cybersecurity at NCEMC and a staff member at Pee Dee Electric who will provide work assignments and provide guidance with projects. Internal Relationships: Responsible for maintaining internal relationships with the assigned cooperative staff and leadership. Working Conditions: Daily commuting to Pee Dee Electric office. Work location will be in either normal office conditions or outdoors. Personal Protection Equipment and steel toe boots will be provided. Company Profile: North Carolina's Electric Cooperatives (********************************** is the brand for the family of organizations formed to support the state's 26 local electric cooperatives, including: North Carolina Electric Membership Corporation, the power supplier to many of the electric cooperatives; North Carolina Association of Electric Cooperatives, the cooperatives' trade association; and Tarheel Electric Membership Association, Inc. (TEMA), a central purchasing and materials- supply cooperative. North Carolina Electric Membership Corporation provides equal employment opportunities (EEO) to all applicants for employment.

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External Job Responsibilities: Assisting in the Development of electrical-based systems, including electronics, electrical harness and wiring, software interface, component selection, and associated electrical systems. * Product application analysis - Research product electrical needs. Review regulatory requirements, Crown design guidelines, technical risk management. Develop electrical system requirements, including performance, form and fit, and cost goals. * Product design and development - Design solutions to meet operational, safety, regulatory, manufacturability, and cost requirements. Perform design analysis of performance, reliability, safety, and failure mode analysis. Produce and maintain block diagrams, schematics, and wiring diagrams for the product. * Product testing and support - Create and conduct design verification tests for product electrical systems. Work with Quality, Manufacturing, and Service to develop test protocols for the construction and use of the product. Qualifications: * Candidate should be pursuing a bachelor's degree in Electrical Engineering, Electrical Engineering Technology, Computer Engineering, or equivalent. * Good written, verbal, analytical, and interpersonal skills * Candidate must have their own reliable means of transportation Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. EOE Veterans/Disabilities Nearest Major Market: Jacksonville Job Segment: Summer Internship, Entry Level Engineer, Testing, Electrical Engineering, Construction, Entry Level, Engineering, Technology