Electrical engineer jobs in Parma, OH - 323 jobs

The Controls Engineer position provides expertise in industrial manufacturing and process controls to support the production of energetic materials and packaged explosives. This role will focus on the design, programming, and optimization of advanced process control systems, ensuring safety, efficiency, and reliability for new projects at our satellite manufacturing plants and new projects. The ideal candidate will have hands-on experience with DCS/PLC systems, industrial automation, and process control design. Key Responsibilities and Duties Ability to uphold the company's mission, vision, and values. Promote safety awareness in both work practices and company culture. Meet with, interface with, and coordinate designs with the various stakeholders during development phases from concept development through construction. Responsible for the electrical and control aspects of new capital and improvement projects including hardware design, programming, design documentation, networking, data acquisition, equipment installation, equipment debug, and support. Design and review P&IDs, process descriptions, and automation documentation. Design and program DCS/PLC control systems and implement system configurations. Define and coordinate the physical installation of instruments, control valves, and I/O cabinets. Troubleshoot and maintain Safety Instrumented Systems (SIS) and related controls. Maintain and develop plant electrical loads analysis, Arc Flash requirements and One-Line drawings. Preparation of specifications, technical documentation, operating and maintenance procedures. Coordinates with operations to ensure correct equipment installation, operation, maintenance, and troubleshooting. Perform PID loop tuning using manual or software-based methods. Assist with the procurement of equipment, materials, and services and the selection and hiring of subcontractors. Supply project leaders with capital cost estimates and project timelines for completion of electrical and control work. Skills, Knowledge, and Abilities Safety Orientation: Commitment to "safety first" always and in all situations; accepting that safety is not something else to do. It is an element of everything we do for our employees and customers. If unsafe, we stop and do not go forward until it is. Commitment to Task: Able to take responsibility for actions and outcomes and persist despite obstacles; give dedication to the position; demonstrate dependability under challenging circumstances and show a sense of urgency about getting results. Communication: Able to present information through spoken or written word; read and interpret complex information; talk with internal/external customers; listen well. Decision-Making & Problem-Solving: Able to act in solving problems while exhibiting judgment and a realistic understanding of issues; able to use reason, even while dealing with emotional topics; review facts and weigh options with solid attention to detail. Policies, Processes, & Procedures: Able to act following established guidelines; follow standard regulatory procedures; communicate and enforce organizational policies and procedures. Integrity: Deal with others straightforwardly and honestly, be accountable for actions, maintain confidentiality, and support company values. Adaptability: Adjusts planned work by gathering relevant information and applying critical thinking to address multiple demands and priorities in a changing environment. Customer/Quality Focus: Anticipates and meets customers' needs and appropriately responds. Provides the highest quality service and product to all customers. Education and Experience Bachelor's degree (B.A.) in Electrical/Controls Engineering, Chemical Engineering, or Computer Science, with at least five years of related experience. Experience in chemical manufacturing, food and beverage manufacturing, or other relevant industries. Proficiency with DCS/PLC systems, motor control, and variable frequency drives. Experience with communication protocols: Ethernet/IP, Modbus, Modbus TCP/IP, Fieldbus, DeviceNet. Proficiency in multiple IEC 61131-3 programming languages such as LD, ST, and FBD Experience with Allen-Bradley controls - Logix/Studio and FactoryTalk View ME/SE Working knowledge of the UL, NEC, CEC, NFPA, Hazardous Rating, and other technical codes. Working knowledge of PSM (process safety management) processes and systems is desired but not required. Strong knowledge of MS Office and control software tools. Experience with AutoCAD or similar software is a plus Ability to manage multiple projects, work independently, and meet deadlines. Work Environment and Physical Demands This position supports Austin Powder Company locations in the United States and Canada. Work is both in a remote office setting and out in the field. United States or Canada (Remote) Willingness and ability to travel to company locations in the United States and Canada on a scheduled and unscheduled basis, approximately 30% AUSTIN POWDER's Mission To improve the world we live in through the safe and responsible use of explosives. AUSTIN POWDER's Vision We will be the global leader of explosive products, services and technologies as defined by our Customers, our Family and our Communities. AUSTIN POWDER's Values Safety is our 1st priority; WE are customer focused; we leverage the Power of the Family; We treat everyone with respect. This is an exciting opportunity for a proven leader to celebrate the company's rich history beginning in 1833. This is a unique opportunity to drive future success through continued transformation of key manufacturing processes and lead the sites to best in class performance levels and culture. Austin Powder is an Equal Opportunity and Affirmative Action Employer and is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Austin Powder also participates in E-Verify.

Seeking an Automation / Controls Engineer with hands-on experience in PLC, SCADA, HMI, or Robotics to support industrial automation systems. The role involves programming, troubleshooting, and supporting automated equipment in manufacturing or industrial environments. Responsibilities: PLC programming and automation support SCADA/HMI configuration and troubleshooting Support robotics or automated systems (as applicable) System testing, commissioning, and documentation Requirements: 3+ years in Automation / Controls Engineering Experience with PLC-based systems Exposure to SCADA, HMI, or Robotics Engineering background (Electrical / Electronics / Mechanical)

Are you ready to elevate your career in electrical engineering? Join our team and seize an exceptional opportunity to lead a talented group of engineers in a dynamic work environment. Enjoy the benefits of exceptional tenure, a comprehensive benefits package with an out-of-pocket cost for family as low as $35, and a lucrative salary and bonus structure. Experience autonomy and the chance to make a significant impact in a heavy manufacturing facility. Required Qualifications Bachelor's degree in Electrical Engineering Minimum 5 years of experience in an industrial or heavy manufacturing facility Proven experience leading or managing engineering teams Experience with Allen-Bradley PLCs and software (RSLogix 500, RSLogix 5, Studio 5000, and FactoryTalk View ME) Experience designing and reading one-line diagrams, electrical schematics, and wiring diagrams for industrial electrical and control systems Ability to troubleshoot electrical systems (hydraulic and pneumatic systems a plus) AutoCAD experience a plus Responsibilities Lead and develop a team of 5 electrical engineers Design and upkeep of existing plant electrical systems Design electrical distribution and control schemes for new equipment Create one-line diagrams and schematics for new and existing equipment Work with suppliers and contractors when purchasing and installing equipment Assist maintenance in troubleshooting and repair of equipment, including instructing maintenance on proper troubleshooting techniques Work with purchasing on procurement of new and used electrical equipment Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

DESCRIPTION: Programming knowledge in Siemens NX of complex components. Airfoil knowledge a plus. Responsible for programming and editing for multiple machine languages. Heidenhian, Siemens ,+ Fanuc. Basic design of fixturing to be able to machine components. Familiarity with 3 and 5 axis milling machines / Wire EDM Machines/ Electrode CNC Machine and EDM sinkers. Responsibilities: -Programming complex components in Siemens NX. -Help where needed and being a team player, communication is critical. -Reading and interpreting blueprints. -Planning and forecasting stock needs; ordering as needed. -Designing fixturing/ workholding for airfoil components. -Creating an order of operations sequence to complete components in the shop. QUALIFICATIONS: Experience in airfoils tooling designs- Includes core dies, wax dies, fixturing. -Computer knowledge of Siemens NX. -Ability to read complex airfoil blueprints, a plus. -Demonstrate strong sense of ownership and dedication to meeting deadlines. -Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers, and supervisors. -Good organizational and interpersonal skills. -Willingness to learn an improve upon skills and techniques.

The Department of Electrical, Computer, and Systems Engineering (ECSE) at Case Western Reserve University (CWRU) invites applications for one non-tenure-track faculty position at the Assistant or Associate Professor rank. Appointments will be considered for starting dates as early as July 1, 2026. Appointment rank will ultimately be commensurate with experience. Candidates must have a Ph.D. degree in Electrical Engineering, Computer Engineering, or a closely related field. In compliance with the City of Cleveland's Pay Transparency Ordinance (effective October 27, 2025), the annual starting base salary range for this position is from $90,000 - $101,000. CWRU considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market and organizational considerations when extending an offer. University employees enjoy a comprehensive benefits package that includes excellent healthcare, retirement plans, tuition assistance, and paid time off. All applicants must hold either great promise for (Assistant Professor rank) or great track record in (Associate Professor rank) effective teaching, especially at the undergraduate level, and substantial service/outreach activities. The successful candidate is expected to teach at the undergraduate level in electrical and computer engineering. Priority areas of interest are introductory analog/digital circuits and instruments as well as junior- and senior-level design courses. Depending upon interest and expertise, the successful candidate will also be able to develop new courses at the undergraduate and graduate levels that further enrich the experiential learning opportunities of the students. The candidate is also expected to perform undergraduate student advising, coordinate/lead accreditation-related activities, serve on department- and university-level committees, and represent the department in outreach/recruitment events, as needed.

Osborn Engineering is seeking am Electrical Project Engineer for our Cleveland office. The successful candidate will have 10-15 years' experience in the planning, design, development, and construction phases of a variety of project types. This position reports directly to the Manager of Electrical Engineering and will work closely with the directors, managers, and engineering staff to ensure that our client's needs and expectations are exceeded. Osborn is a fully integrated multi-disciplined design firm that uses a specialized team approach to engineering projects. These teams are comprised of a staff of more than 350 professionals that provide designs for all phases of a wide range of projects. Osborn has specialists in civil, structural, mechanical, electrical, plumbing, fire protection and life safety, technology engineering, transportation and commissioning. As an employee-owned firm, each Osborn employee is committed to education and advancement - ensuring that each project is completed with a sense of pride. Osborn's strength lies with its people. Position Responsibilities: Complete project scope of work per discipline, project and client management, under direction of Project Manager. Perform analysis, design and documentation of power distribution, lighting systems, and backup power systems. Coordinate with specialists for fire alarm, technology and lighting design as required by project scope of work. Coordinate with architects, mechanical/plumbing engineers and other disciplines for equipment power needs and sizing electrical distribution. Perform electrical design calculations for electrical loads and panel schedules. Develop electrical systems one-line diagrams. Select and schedule electrical equipment. Edit specifications to reflect the project requirements. Meet with vendors to determine specification requirements for application. Coordinate with other disciplines for all Electrical design elements. Prepare design deliverables for SD, DD, CD level documents. Provide cost opinions for budgeting construction, and reviewing contractor change orders Perform project construction administration including response to RFI's and accurate review of submittals. Perform field verification and take-offs of existing systems for renovation projects. Attend meetings with clients, authorities having jurisdiction, and other professionals as projects require. Work planning and manage the design process to the available hours in the work plan. Job Requirements/Qualifications: (10 - 15) Years of experience in Electrical Design in Consulting Engineering. Working knowledge of design and analysis software such as Revit, SKM, ETAP, Easypower. Knowledge of National Electrical Code (NEC), State Energy Code, NFPA, and FGI Guidelines. Experience with electrical system studies such as short circuit, over-current device coordination, and Arc Flash Hazard analysis per NPFA 70E. Knowledge of standard construction practices and the ability to work with contractors to address construction issues. Coordinate with technical leads and senior engineers when specialized assistance is needed on design. Ability to work and manage tasks on several projects concurrently Experience in designing Healthcare, Sports, Commercial, Public Sector, Industrial, Education, and/or Institutional projects. Bachelor's degree in Electrical Engineering Preferred. PE License Required Qualifications Osborn is looking for a candidate who has the following characteristics: Reliable Team Player Self - Starter Positive Attitude Strong Work Ethic Critical Thinker Detail Oriented Innovative Good Communicator Posted salary ranges reflect market-based averages for the role. Final compensation will be determined based on each candidate's experience, qualifications, and overall fit for the position. All job offers will be contingent on passing a background check. Drug testing may be required for certain clients. Osborn will only be contacting qualified applicants. EEO NOTE TO RECRUITERS: Osborn Engineering does not currently accept unsolicited resumes through or from search firms or recruiters. If you wish to be considered in the future for our list of approved recruiters, please send an e-mail to **************************. All resumes sent directly to management will not be considered.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: * Candidates must be majoring in Electrical Engineering * Strong academic performance * Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. * Positions are available spring, summer, and fall semesters * Availability for multiple work terms is preferred * A valid driver's license is required * Concurrent enrollment in a degree seeking program * Military experience a plus * MIN - $32.92 per hour / MAX - $41.67 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00020139 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Part time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

McGraw Kokosing is a leading industrial maintenance contractor based in Middletown, OH. With extensive capabilities that include off-site manufacturing and assembly, pipe fabrication and installation, electrical and instrumentation, structural steel erection, rigging, and equipment setting, we are committed to delivering best-in-class solutions to our clients. Serving a diverse range of industries including steel, power, oil and gas, and food and beverage, McGraw Kokosing provides comprehensive services such as planned plant outages, emergency maintenance, and capital improvement projects for both new and existing facilities. Since partnering with Kokosing Industrial in 1992, we have consistently prioritized safety and quality, striving to lead the industry in delivering exceptional results for our customers. Additionally, our preconstruction services include risk assessments, budget validation, 3D modeling, and more, ensuring that we meet and exceed our clients' expectations every step of the way. : McGraw Kokosing is a leading MEP and industrial maintenance contractor based in Middletown, OH. With extensive capabilities that include off-site manufacturing and assembly, pipe fabrication and installation, electrical and instrumentation, structural steel erection, rigging, and equipment setting, we are committed to delivering best-in-class solutions to our clients. Serving a diverse range of industries including steel, power, oil and gas, data center, and food and beverage, McGraw Kokosing provides comprehensive services such as planned plant outages, emergency maintenance, and capital improvement projects for both new and existing facilities. Since partnering with Kokosing Industrial in 1992, we have consistently prioritized safety and quality, striving to lead the industry in delivering exceptional results for our customers. Additionally, our preconstruction services include risk assessments, budget validation, 3D modeling, and more, ensuring that we meet and exceed our clients' expectations every step of the way. Job Description: The electrical project engineer role will be supporting a team to implementation of electrical systems for large scale industrial construction projects. They will be involved in mission critical projects, taking the project from pre-construction through final acceptance to successful completion. Directly responsible for the project safety and quality, project budget, schedule and job controls, vendor management, submittals and procedures. Duties and Responsibilities: * Manage project engineering and related personnel functions and activities. Includes planning procurement, design review, project controls, work assignments, etc. * Ensure project engineering activities comply with company and contract requirements and support overall construction schedule * Prepare documents to obtain quotes from vendors to provide material, equipment, and other specialty items. * Track material deliveries. * Interface with departments, divisions, and internal staff on issues related to budgeting, staffing, discipline of employees, training/development, scheduling and other activities involving discretion and judgment. * Review engineering plans and vendor submittals. * Monitor crew assignments to ensure productivity goals are met. * Conduct field walks and spot checks of work being performed. * Ensure compliance with county, state and OSHA policies and regulations. Required Skills: * 2+ years similar construction Project Engineer. * Degree in Electrical Engineering or Construction Management Skills and Abilities: * Must be able to understand, interpret, and consistently apply safety laws, company policies/standards. * Ability to apply innovative and effective management techniques to maximize employee performance. * Ability to build trust and achieve results with clients and company team members. * Read drawings, interpret work specifications and work scopes. * Demonstrate the ability to have solid attention to detail, and the ability to be a problem solver. * Strong work ethic to complete tasks as a team in a high-quality manner. Benefits: McGraw Kokosing offers competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. McGraw Kokosing is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class. McGraw Kokosing offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. McGraw Kokosing is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Job Description Compensation: $90,000-$115,000 Unlock your career potential with a growing engineering firm offering exceptional advancement opportunities. We're seeking a Senior Controls Engineer to lead the design, programming, and implementation of automation and control systems across multiple industries. This role offers broad technical variety, end-to-end project ownership, and the option to incorporate business development responsibilities for those interested in a hybrid technical/commercial path. Key Responsibilities Design, program, and troubleshoot industrial control systems, including PLCs, HMIs, drives, instrumentation, and control panels. Create, read, and edit logic diagrams, wiring diagrams, single-line drawings, and P&IDs. Develop PLC programs from scratch-primarily Allen-Bradley (MicroLogix, ControlLogix, CompactLogix) and PanelView HMI systems. Troubleshoot mechanical and electrical issues in automated equipment; perform repairs and refurbish PLC modules, HMIs, and related components. Lead or assist with on-site system start-up, commissioning, testing, and problem resolution. Collaborate cross-functionally to ensure accurate process and control design throughout the full project lifecycle. Required Qualifications 2+ years of PLC programming experience (Allen-Bradley or Siemens), including building programs from the ground up. 2+ years of experience programming FactoryTalk / PanelView applications. Hands-on experience with site commissioning and start-up of control systems. Strong background in process controls preferred. Ability to perform full-cycle controls engineering: electrical drawings, panel design, PLC/HMI programming, and field commissioning. Why This Is a Great Opportunity This role sits within a well-established, fast-growing small/midsize engineering company that values innovation, autonomy, and career development. Engineers here enjoy: Flexible hybrid work arrangements for qualified candidates Exposure to diverse industries and complex automation challenges Full ownership of projects from concept through commissioning The ability to expand into business development if desired A supportive, collaborative environment with significant upward mobility About Cleveland, Ohio Cleveland offers the perfect blend of affordability and big-city amenities. Located on the shores of Lake Erie, it boasts a vibrant engineering and manufacturing sector, a thriving food and arts scene, beautiful parks, and welcoming neighborhoods. With a low cost of living and easy access to outdoor recreation, Cleveland is an attractive place for professionals looking to grow both career and lifestyle. Ready to Advance Your Automation Career? If you're a controls engineer who thrives on hands-on work, full project ownership, and the chance to make a tangible impact, we encourage you to apply. Join a company where your expertise is valued, and your career trajectory is limitless. Relevant Keyword Cloud: Controls Engineer, Senior Controls Engineer, PLC Programming, Allen-Bradley, Siemens PLC, Process Controls, FactoryTalk, PanelView, ControlLogix, CompactLogix, HMI Development, Automation Engineer, Industrial Controls, Electrical Design, Control Panel Design, Commissioning Engineer, Start-up Engineer, Instrumentation, Drives, P&ID, Logic Diagrams, Cleveland Engineering Jobs, Automation Systems, Manufacturing Automation

The Electrical Engineer - Power Systems performs electrical power systems studies and analysis for industrial and utility clients. Utilizing industry standard analysis software (ETAP, SKM, etc.), the successful candidate will demonstrate the ability to create study cases, analyze results, and provide detailed written reports. A strong fundamental understanding of industrial and utility power systems and calculation methods is required. The Electrical Engineer - Power Systems is responsible for working with clients and other Nexus personnel to prepare studies including: The Electrical Engineer - Power Systems reports to the Senior Electrical Engineer or Engineering Discipline Manager. Completed technical work is provided to senior management prior to presentation to the client. This position will require occasional travel (2-3 times per year) of up to one week to visit client facilities to gather data along with other Nexus personnel. Responsibilities System Short Circuit Studies Relay Coordination Studies Load Flow Analysis Power System Harmonics Analysis Motor Starting Studies Arc Flash Hazard Studies Relay Setting File Creation & Analysis Qualifications BS in Electrical Engineering is required. Working knowledge of ETAP is required. Familiarity with other systems analysis tools such as SKM is desired. 5+ Years of experience in power systems studies Strong working knowledge of Excel and other Microsoft Office Products Education/Certification Requirements Bachelor of Science in Electrical Engineering required Position Type/Expected Hours of WorkThis is a full-time position. Days and hours of work are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Competitive BenefitsLearn more about our competitive benefits in detail. Why Nexus?Nexus Engineering Group, a distinguished independent full-service engineering, procurement, and construction management (EPCM) firm, provides comprehensive support to clients from concept through startup. With over a decade of demonstrated engineering and design success, Nexus stands out as the firm of choice for those valuing integrity and expertise. At Nexus, you will be part of a talented and passionate team dedicated to excellence and innovation. We foster a collaborative and engaging work environment, making it a place where you'll enjoy contributing to impactful projects. Joining Nexus means aligning with a firm renowned for its creativity, dedication, and relentless focus on achieving client goals. Nexus Engineering Group, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. Third-Party Recruiting PolicyLearn more about our third-party recruiting policy.

For more than 150 years, Morgan has been committed to offering world class solutions for the metals industry. At Morgan, we position our customers for success by collaborating with them to enhance safety, improve efficiency, and deliver value through the world's most advanced material handling systems-while building a better future for our employees and community. Due to growth, we are looking for a full-time Electrical Project Engineer to join our team in Alliance, Ohio. You will develop and test software for automation systems in heavy industrial environments while ensuring that innovation comes standard with every order. Join our team to help us fulfill our vision: To challenge the possibilities of today by thinking differently. Responsibilities: Provide technical assistance to customers regarding electrical products and systems. Provide technical assistance to customers regarding electrical products and systems including but not limited to Motors, VFD's, PLC Systems, HVAC, Control Panel Design, Low voltage distribution systems and controls. Adapt existing electrical products to meet specific customer applications. Collaborate with Automation and other teams to develop custom solutions. Define and implement solutions for project system requirements and develop system specifications for industrial drive and automation systems Assist in development and test control software for PC, Allen Bradley and Siemens PLC based systems for overhead cranes, metal rolling, strip processing and rod/bar mill applications Recommend changes to unit and integration test plan elements as necessary Manage project cost budget Must be willing to travel as needed Perform network connectivity troubleshooting Education/Experience: Bachelor's degree in electrical engineering, or a relevant technical field-Or equivalent experience 3 years' experience in designing, commissioning, and maintaining industrial drive and automation systems for heavy industry applications 1 year of experience with programmable logic controllers Strong communication skills and attention to detail Proficient in AutoCAD a plus Proficient with MS Office (Access, Excel, Word, PowerPoint, Outlook) Benefits: Competitive wages Comprehensive benefits package, including: Health insurance Dental insurance Vision insurance Life insurance 401(K) 401(K) matching Paid time off About Morgan: For more than 150 years, Morgan Engineering has created a legacy as a world leader in material handling systems. Through the design, production and service of large-scale industrial overhead and gantry-type cranes and mill equipment, we provide the innovative technology and engineering expertise to move our clients' businesses forward. To learn more about our company or apply for this position, visit **************************

Vector's partner located in Westlake, Ohio, is the global leader in weathering and corrosion testing, offering test instruments as well as outdoor and laboratory services. They are searching for the right fit for their Senior Power Electronics Engineer. Direct Hire $90k-$125k/yr. Responsibilities: Engage in all phases of electrical subsystem design, printed circuit boards and sensors product development, including concept, design, documentation, prototyping, testing, and manufacturing Own multiple engineering projects including new product developments, design improvements, and cost reductions Design, build, and test prototypes to validate performance versus requirements Plan and manage project requirements, technical risks, deliverables, and timelines Develop innovative designs to meet all requirements for safety, performance, reliability and manufacturability Write test instructions, engineering reports, and engineering change notices Provide technical assistance to the purchasing, service, sales, marketing, and production departments Requirements: Bachelor's Degree in Electrical Engineering 10+ years proven record in a product development and manufacturing environment Hands on experience designing power devices and controllers, high voltage switch mode power supply, analog and digital circuits Designing and developing proper heat management solutions for circuit designs Designing circuit boards including schematics, bills of material, printed circuit board layout Desired Skills: Experience with lamp ballast design, development, and troubleshooting Experience with UV fluorescent and xenon arc lamps Designing electronics with high voltage MOSFET/IGBT Expertise designing and specifying custom inductors and transformers Troubleshooting voltage transient, EMI, and susceptibility related problems Working with 3 phase equipment up to 400V

We are seeking a highly skilled and motivated Lead AME Automation and Controls Engineer to join our team. In this hands-on role, you will lead projects focused on the design and development of fixed and collaborative automation systems aimed at increasing productivity and eliminating non-value-added work for our MR RF Coil product lines. You will be an integral part of our new product introduction projects (NPI's), leading the design transfer from Engineering to Manufacturing, including process design, qualification, control software development and validation of equipment and product. A key influencer to product design to incorporate automation standards for flexible and cost-effective solutions from the initial production release. Job Description Key Responsibilities: * Lead projects to design and develop automation systems to enhance manufacturing productivity, new product introduction and capacity. * Own the controls architecture and software for PLC, Robotics, and Vision Systems. * Lead Design Transfer of NPIs by collaborating with manufacturing, manufacturing engineering, and product engineering teams. * Identify high Return on Investment opportunities, design and conduct feasibility studies, and develop business cases to deploy automation into production. * Apply creative solutions and ideas to drive productivity and quality using LEAN methodology, novel fixturing, collaborative robots, AI, traditional automation techniques, and integration of PLCs, HMIs, and motion systems. * Support Brilliant Factory initiatives by connecting physical processes with digital information. * Create standard automation Equipment/User Requirement Specifications to drive component standardization, data standards, and safety risk assessments. * Manage projects and lead project teams in a matrix organization. * Leverage and manage outside suppliers to deliver automation solutions. * Troubleshoot factory equipment controls, update/debug control software and support factory equipment as needed. Qualifications: Required: * Bachelor's Degree in Electrical, Mechanical, Manufacturing Engineering, or related technical degree. * 3+ years' experience in factory automation, deploying various automation technologies from concept phase through final implementation into production. * Demonstrated skills in PLC and HMI programming, trouble shooting and debug * Experience in program or project management skills of internal/external integrators. * Experience developing technical documents, including the ability to write/perform FMEA's, Equipment Risk Assessments, ERS's (Equipment Requirements Specifications), and Validation Plans. * Experience with design tools such as AutoCAD, SolidWorks, and CREO. Desirable: * 5+ years' experience in the design, build, programming, and deployment of automation. * Experience with Fanuc Robot Programming and Python code development. * Experience with controls automation design and safety standards; NFPA 79, RIA15.06, and other relevant industry standards. * Substantial industrial experience in Manufacturing Engineering. * Six-sigma DMAIC & DFSS certified. * Solid working knowledge of Medical Device QMS procedures. * Experience working with global teams. * Demonstrated experience owning production processes and growing capability in yield, quality, and capacity. * Demonstrated troubleshooting, analytical, and planning skills. * Strong communication skills (written and verbal) to all levels of the organization. * Ability to identify and implement Best Practices. Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No

Bitdeer Technologies Group (Nasdaq: BTDR) is a world-leading technology company for Bitcoin mining. Bitdeer is committed to providing comprehensive computing solutions for its customers. The Company handles complex processes involved in computing such as equipment procurement, transport logistics, datacenter design and construction, equipment management, and daily operations. The Company also offers advanced cloud capabilities to customers with high demand for artificial intelligence. Headquartered in Singapore, Bitdeer has deployed datacenters in the United States, Norway, and Bhutan. Power Systems Electrical Engineer About the role: Bitdeer Inc. is searching for an accomplished, experienced Electrical Engineer with experience in Low, Medium and High Voltage, with the passion and motivation to contribute to innovative, industry-leading projects. The electrical engineer will collaborate with a variety of colleagues across project teams and other departments. Our ideal candidate is a self-motivated problem solver who finds pragmatic solutions for technical challenges. This position will be reporting to General Manager of US Datacenter Business. Preferred base located: Ohio, not limited to cities. What you will be responsible for: * Develop detailed Electrical Engineering CAD drawings and specifications related to power supply infrastructure for mining data centers. This includes site plans, load calculations, panel schedules, PDU specifications rack elevations and layouts, cable tray and conduit, wire sizing and other related engineering work. * Assist procurement to specify electrical equipment including transformers, switches, distribution panels, PDUS, cabling, cable trays and other electrical equipment and associated ratings to meet electrical Code requirements. * Provides electrical engineering recommendations and technical support on electrical engineering design, scope of work, and equipment procurement * Assists with cost allocation/estimation, budgeting, resource planning, scheduling, and project management. * Establishes technical standards in reviews, documentations, and designs. * During the construction process, follow design to ensure all electrical equipment, cables, and installations meet standards, making sure all necessary tests have been completed satisfactory to code requirements. * Lead on-site electrical safety maintenance including, but not limited to, regular safety checking for all electrical equipment, power supply infrastructure to maintain a good level of risk management to avoid downtime of major equipment/machineries or any accidents * Provide electrical technical support to new sites development * Communicate engineering information across teams and departments to facilitate successful completion of large-scale projects * Work and liaise with internal key stakeholders in the US as well as in Asia * Significant travel may be required How you will stand out: * Professional Engineer certification * Bachelor's degree in Electrical Engineering with Power systems emphasis * 3-8 years professional design experience with medium and high voltage power systems and distribution * Knowledge of power distribution equipment including transformers, switches, power quality, harmonic analysis, short circuit and arc flash analysis, grounding, and lightning protection. * Capacity to analyze a problem from multiple perspectives and explore creative solutions. * Strong communication skills. High attention to detail with a desire for excellence * Works well with teams and other design professionals. * Ability to travel to various locations Preferred qualifications: * 8-10 years overall experience in electrical engineering or project management * Experience in the design of power systems for medium and high voltage distribution is a plus * Design of grounding and lightning protection systems is a plus * Fluency with MS office suite, AutoCAD, and power system modeling software What you will experience working with us: * A culture that values authenticity and diversity of thoughts and backgrounds; * An inclusive and respectable environment with open workspaces and exciting start-up spirit; * Fast-growing company with the chance to network with industrial pioneers and enthusiasts; * Ability to contribute directly and make an impact on the future of the digital asset industry; * Involvement in new projects, developing processes/systems; * Personal accountability, autonomy, fast growth, and learning opportunities; * Attractive welfare benefits and developmental opportunities such as training and mentoring. * ------------------------------------------------------------------- Bitdeer is committed to providing equal employment opportunities in accordance with country, state, and local laws. Bitdeer does not discriminate against employees or applicants based on conditions such as race, colour, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union.

About Bitdeer: Bitdeer Technologies Group (Nasdaq: BTDR) is a world-leading technology company for Bitcoin mining. Bitdeer is committed to providing comprehensive computing solutions for its customers. The Company handles complex processes involved in computing such as equipment procurement, transport logistics, datacenter design and construction, equipment management, and daily operations. The Company also offers advanced cloud capabilities to customers with high demand for artificial intelligence. Headquartered in Singapore, Bitdeer has deployed datacenters in the United States, Norway, and Bhutan. Power Systems Electrical Engineer About the role: Bitdeer Inc. is searching for an accomplished, experienced Electrical Engineer with experience in Low, Medium and High Voltage, with the passion and motivation to contribute to innovative, industry-leading projects. The electrical engineer will collaborate with a variety of colleagues across project teams and other departments. Our ideal candidate is a self-motivated problem solver who finds pragmatic solutions for technical challenges. This position will be reporting to General Manager of US Datacenter Business. Preferred base located: Ohio, not limited to cities. What you will be responsible for: Develop detailed Electrical Engineering CAD drawings and specifications related to power supply infrastructure for mining data centers. This includes site plans, load calculations, panel schedules, PDU specifications rack elevations and layouts, cable tray and conduit, wire sizing and other related engineering work. Assist procurement to specify electrical equipment including transformers, switches, distribution panels, PDUS, cabling, cable trays and other electrical equipment and associated ratings to meet electrical Code requirements. Provides electrical engineering recommendations and technical support on electrical engineering design, scope of work, and equipment procurement Assists with cost allocation/estimation, budgeting, resource planning, scheduling, and project management. Establishes technical standards in reviews, documentations, and designs. During the construction process, follow design to ensure all electrical equipment, cables, and installations meet standards, making sure all necessary tests have been completed satisfactory to code requirements. Lead on-site electrical safety maintenance including, but not limited to, regular safety checking for all electrical equipment, power supply infrastructure to maintain a good level of risk management to avoid downtime of major equipment/machineries or any accidents Provide electrical technical support to new sites development Communicate engineering information across teams and departments to facilitate successful completion of large-scale projects Work and liaise with internal key stakeholders in the US as well as in Asia Significant travel may be required How you will stand out: Professional Engineer certification Bachelor's degree in Electrical Engineering with Power systems emphasis 3-8 years professional design experience with medium and high voltage power systems and distribution Knowledge of power distribution equipment including transformers, switches, power quality, harmonic analysis, short circuit and arc flash analysis, grounding, and lightning protection. Capacity to analyze a problem from multiple perspectives and explore creative solutions. Strong communication skills. High attention to detail with a desire for excellence Works well with teams and other design professionals. Ability to travel to various locations Preferred qualifications: 8-10 years overall experience in electrical engineering or project management Experience in the design of power systems for medium and high voltage distribution is a plus Design of grounding and lightning protection systems is a plus Fluency with MS office suite, AutoCAD, and power system modeling software What you will experience working with us: A culture that values authenticity and diversity of thoughts and backgrounds; An inclusive and respectable environment with open workspaces and exciting start-up spirit; Fast-growing company with the chance to network with industrial pioneers and enthusiasts; Ability to contribute directly and make an impact on the future of the digital asset industry; Involvement in new projects, developing processes/systems; Personal accountability, autonomy, fast growth, and learning opportunities; Attractive welfare benefits and developmental opportunities such as training and mentoring. -------------------------------------------------------------------- Bitdeer is committed to providing equal employment opportunities in accordance with country, state, and local laws. Bitdeer does not discriminate against employees or applicants based on conditions such as race, colour, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union.

PTC is a leading manufacturer and marketer of welded and cold drawn mechanical steel tubing and tubular shapes, plated bar and tubing, and fabricated parts and precision components. We at PTC value our employees' health and wellness. We offer the following: FREE Healthcare HSA option Dental Vision Life Insurance Dependent & Spouse Life Insurance Long Term Disability Cancer & Critical accident coverage 401K plan with company match Referral Bonus Annual college scholarship available for children & grandchildren of PTC employees Tuition Reimbursement eligibility Job Summary: This position will support the implementation of automation and controls within projects across the Company. Additionally, the engineering group is creating company standards for each facility to follow (electrical power systems, automation, facility infrastructure…), so this position will help with this effort. Essential Duties and Responsibilities: Develop scope-of-work and request-for-quotation for equipment and component vendors, service providing contractors, original equipment manufacturers, systems integrators, … Managing contractors and / or employees in the execution of the project Project management, making sure projects stay “on-time” and within budget. Assist with Project Risk and Identification Reviews and creating mitigation plans regarding the specific items identified. The incumbent is expected to understand that all employees have a shared responsibility for the quality of products and related services provided to our customers. Duties and Responsibilities are to be carried out in accordance with the PTC Quality Management System and its policies, procedures, and work instructions as applicable to the job or function being performed. Competencies: To perform the job successfully, an individual must demonstrate the following competencies: Design - Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Applies design principles; Demonstrates attention to detail. Analytical / Problem Solving - Synthesizes complex or diverse information and formulates a plan forward; Timely identifies and resolves problems; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Project Management - Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities. Technical Skills - Strives to continuously build knowledge and skills. Must be able to use data driven problem solving tools such as Six Sigma, Design of Experiments, and Lean concepts. Interpersonal Skills - Remains open to others' ideas and tries new things. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Demonstrates group presentation skills; Participates in meetings. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively; Able to read and interpret written information. Teamwork - Establishes trust amongst team members; Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Contributes to building a positive team spirit. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Minimum Education and/or Experience Requirements: Heavy-industrial experience is a requirement (5 years), with experience in the pipe manufacturing industry preferred. BSEE degree from an ABET accredited institution is preferred. Experience managing capital projects and Continuous Improvement activities. Minimum Education and/or Experience Requirements (cont'd): Experience with developing and maintaining automation controls programs using relay ladder logic, Structured Text, and functional block diagrams. Experience working with variable frequency drives, DC drive configurations, HMI's, and integrated safety systems. Number of Direct Reports: None Job Titles of Direct Reports: N/A Certificates, Licenses, and Registrations: Must possess a valid driver's license. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee frequently works near moving mechanical parts. The employee occasionally works in high, precarious places and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually loud. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee frequently is required to stand and smell. The employee is occasionally required to walk; climb or balance; and stoop, kneel, or crouch. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at ***************** and embark on a rewarding career journey with Austin. Plans, organizes, and manages all Engineering activities for the department to produce working drawings and specifications for all projects within its own office and may have the responsibility to assist other Managers of Engineering and Architecture at other offices. Capable of demonstrating creativity, foresight, and mature engineering judgment. * 10+, BS or MS in an Engineering discipline, Professional Engineer (PE) license is required. * NCEES Record or obtain within 6 months of employment.

REAL ALLOY is the market leader in third-party aluminum recycling and specification alloy production. Headquartered in Cleveland, Ohio, we have 17 plants strategically located across the United States, Mexico, and Canada. We convert aluminum scrap and by-products into reusable aluminum metal for a growing number of applications across various industries. We are ideally positioned to respond to the needs of an increasingly recycling-conscious world. Advanced technologies enable us to process a large variety of scrap and dross and reduce the amount of residual waste from aluminum manufacturing that would otherwise end up as landfill. Responsibilities Are you an Electrical Engineer looking for an Intern program to sharpen your skills? Do you have the drive to succeed? This Electrical Engineering SUMMER 2026 Co-Op/Internship is based out of our corporate headquarters in Beachwood, OH but will have the opportunity to travel to our plant facilities within a 4-hour distance to see the benefits of their project work in action. We are open to Co-Op and extension with right candidate. Candidate must be willing to work from the Beachwood location. *** This role is for Junior and Senior level college students *** Development Tasks: AutoCAD Electrical drafting, design and revision updates Introduction AutoCAD Electrical and Orientation Real Alloy Standards and Library Draw from sketch Update Drawing from Field Markups Draw Project Task, Initial Design Apply AutoCAD skills as needed Training on applying power design concepts for Safety requirements for Low Voltage, Controls Power 480VAC Motor Start, Soft Starter and AC Drives 120VAC and 24VDC Controls Emergency Stop and Safety Circuits Training on applying technology design concepts Industrial communications and Ethernet Rockwell PLC Platforms Hardware ControlLogix/CompactLogix/SLC500/MicroLogix and Remote I/O Input & Output Interface to equipment Online Troubleshooting and Support Rockwell Studio 5000 / RS Logix 500 PLC programming Programming Organization Self-Documentation Ignition SCADA/HMI programming Projects Tasks: Assignment of project tasks Design concept Hardware development Co-work with Mechanical Engineering Programming and Testing Communication between Engineering and Plant personnel Project Documentation Deployment Plan Implementation at plant Translation Plan to like in kind equipment Report out to business Potential Projects Combustion Controls Gas and Air Flow Meter HART Integration 480VAC Switchgear Power Equipment Data Integration and Collection into Ignition SCADA Develop Reverberatory Furnace Electrical Drawing set Integration of AC Drives into PLCs and SCADA over Ethernet Qualifications Currently pursuing a BS/MS electrical engineering degree - minimum of 3 years' progress towards a bachelor's degree in electrical engineering Overall GPA of 3.25 or above Ability to travel to job-sites for 1-3 days if needed Ability to read an electrical schematic AutoCad familiarity and/or experience Familiarity with electrical circuits design and operation Familiarity with data collection, analysis, and presentation Knowledge of and/or experience with PLC programming (preferably Allen Bradley) Knowledge of and/or experience with HMI programming The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not construed to be an exhaustive list of all job duties performed by the personnel so classified. Equal Opportunity REAL ALLOY is an equal opportunity employer and supports diversity in the workplace. Qualified applications will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Our HR teams will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.

We are looking for a talented Hardware Engineer with expertise in PCB schematic design and board layout using Altium. The ideal candidate will have experience troubleshooting and repairing PCBs and experience in hardware engineering. Responsibilities * Design PCB schematics and perform board layouts using Altium. * Troubleshoot and repair PCBs to ensure optimal functionality. * Collaborate with a close-knit team of engineers to develop innovative projects using the latest technology. * Contribute ideas and solutions that are valued and heard by the company leadership. Essential Skills * Bachelor's Degree in Electrical Engineering or a related field. * At least 0-3 years of hardware engineering co-op or internship experience. * Proficiency in PCB design/layout using Altium or a similar design package. Additional Skills & Qualifications * Strong problem-solving skills and attention to detail. * Ability to work collaboratively in a team environment. * Excellent communication skills. Work Environment You will be working in a small team of about 10 engineers in a collaborative and supportive company environment. The company values everyone's ideas and encourages innovative thinking. The projects involve the latest technology and Industry 4.0 advancements, making for an exciting and dynamic work atmosphere. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Avon,OH. Application Deadline This position is anticipated to close on Apr 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.