Electrical engineer jobs in Rhode Island

Job SummaryRDSI has an opening for a senior Electronic Engineer in their North Kingstown, RI location. The successful candidate will provide technical support for submarine torpedo operation, hardware, and testing. Responsibilities Analyze, Design, and Develop PCB layouts to meet military standards and requirements for new and existing lighting products. Provide technical support for the development of and improvement of torpedo technology, concepts and solutions. Interface with Government and Navy representatives. RequirementsMust have minimum experience with one or more of the following work areas: Minimum of two (2) years demonstrated submarine and torpedo subject matter experience. Able to read and comprehend wiring diagrams and schematics. General knowledge of torpedo system operation, hardware and software. Able to interact with high level fleet personnel. Perform system integration tasks. Qualifications Minimum BS in Electrical Engineering or equivalent. Must be well versed in the use of Microsoft Office Outlook, Word, Excel, and Power Point. Excellent oral and written skills. Must possess good interpersonal skills. General knowledge of SSN and SSBN communication systems and operation. Applicants selected will be subject to a security investigation and must meet eligibility requirements for access to classified information RDSI is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Saab Inc., Autonomous and Undersea Systems division is seeking an innovative and experienced Senior Staff Electrical Engineer to support our growing team working on Autonomous Underwater Vehicles (AUVs) and Remotely Operated Vehicles (ROVs). This position spans many Electrical Engineering topics and is the perfect position for anyone looking at a wide array of design challenges. Our AUVs, UUVs, and ROVs span AC power (shore and charging equipment), DC power (battery systems and conversion), sensor integration, and electromechanical (propulsion, motors, servos, actuators) integration. This is a hands-on position with the chance to build, test, and integrate the designs you work on. This position will be remote or hybrid to start, but will ultimately be based out of our new Bristol, RI facility that is opening in early 2026. An Electrical Engineering position for anyone interested in leading, designing, developing, and/or modifying AC, DC, linear, analog, digital, acoustic, or sensor designs in subsea applications. This person will lead design approaches and parameters. They will analyze operating data, develop and conduct tests, and draw conclusions or make design decisions based on results. They will be responsible for selecting components and equipment based on requirements, specifications, and reliability. They will also support the interdisciplinary development team with their expertise to guide System level decisions. Responsibilities: Lead electrical engineering support and guidance for AUV/ROV systems and present technical concepts regarding product design and performance. Coordinate with Systems, Software, Mechanical, Quality, and Manufacturing as part of a team designing AUV/ROV systems. Technically execute the research and development of new circuit card designs and electromechanical assemblies. Lead and execute functional analysis, evaluation, and optimization of product designs. Present technical results and content to internal and external customers, tailored to the customer audience. Provide technical support to key subcontractors and suppliers. Create and maintain power and endurance budgets through development phases. Provide technical support for manufacturing related matters. Lead design verification efforts. Lead cost/benefit trade-off analysis and feasibility studies. Lead electrical related failure analysis of hardware. Contribute to system level design considerations and trade-offs where many engineering disciplines are concerned. Compensation Range: $124,200 - $161,500 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Skills And Experience: Bachelor of Science Degree in Electrical Engineering with 15+ years of experience or Master of Science Degree in Electrical Engineering with 13+ years of experience. Experience using industry standard electrical engineering design tools (Altium, SPICE, MATLAB) Product development experience demonstrating a strong engineering aptitude and good problem-solving skills with underwater vehicles and devices. Demonstrated experience resolving issues during design, development and execution of electrical engineering activities. Strong interpersonal and group communication skills. Proficiency with MS Office software applications. Experience to Earned Value (EV), Cost Account Management (CAM), and Integrated Master Schedule (IMS) development and tracking Must hold or be able to obtain U.S. DoD SECRET security clearance. Ability to travel up to 15%, both international and domestic. Proficient at understanding requirements traceability in a model-based systems engineering environment. Desired Experience and Skills: Prior DoD industry experience Experience with designing and testing electronics in wet and subsea environment Experience with Altium, SPICE, and electrical systems in Matlab Familiarity with Mil Standards, ruggedized equipment design, and environmental test requirements Knowledge of printed circuit board (PCB) design Knowledge of design for EMI/EMC standards in military application Experience reading and creating schematics, wiring diagrams, and component data sheets Experience derating components and designing for reliability Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Hardware Engineering Department in Portsmouth, RI is seeking new college hires in the area of analog, digital, mixed signal, configurable logic or power design. The desired candidate would possess a desire to gain expertise in two or more of these specialized areas and can work independently yet collaboratively in a team environment: Analog Design - small signal amplification and filtering, low noise techniques Mixed Signal Design - A/D D/A Converters, Waveform Generators Digital design: MUXs, gates, buffers, registers, ram / flash memory Embedded Systems: FPGAs, MPUs, SoC, Signal Processing Magnetics Design - Inductor, Transformer, Tuning Networks Power Design - Filters, EMI Suppression, Overload/Short Circuit/Stress Analysis Optical - Networking, Long-haul Fiber, Repeaters, Splicing and Routing Simulation tools: PSpice, Matlab Acoustics: Transducer/Sensor Design What You Will Do Productive professional contributor working under limited supervision to design, analyze, integrate, test, and document electrical hardware of moderate complexity. Contribute to hardware engineering requirements capture, analysis and creation for medium complexity components of electrical designs. Work closely with other engineering disciplines (e.g., Mechanical, Software and Systems Engineering) to ensure that electrical design is appropriate for the project/product design approach. Participate in cross-functional team efforts in integration and test of completed designs and sub-systems. Understand and utilize the appropriate processes and tools during development of hardware. Use independent judgment to make decisions in day-to-day job responsibilities. Report status relating to technical performance, cost, and schedule for assigned scope of work. Provide support for customer reviews and meetings. The work associated with this position will be performed onsite. Travel as necessary to customer sites for information gathering, installation and test of end-product. Up to 15%. Qualifications You Must Have Masters degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major. This position requires 12 months or less of relevant professional work experience (excluding internships). Qualifications We Prefer ABET is the preferred, although not required, accreditation standard. 3.0 cumulative GPA desired. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA and projected graduation date on your resume. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

American Ecotech and Ambilabs provide cutting-edge environmental monitoring solutions with a mission to support clean air, smarter cities, and data-driven sustainability. We design, distribute, and support high-performance instrumentation for air quality, emissions, and meteorological monitoring used by government agencies, research institutions, and industry leaders around the world.Electrical Engineer-Onsite (Warren, RI) About the Role American Ecotech is seeking a skilled and motivated Electrical Engineer to join our innovative engineering team. In this role, you will design, develop, and integrate electrical systems that power our environmental monitoring instruments. This position is ideal for an engineer who enjoys working on diverse projects that combine electronics, sensors, and data systems to deliver precise, reliable environmental measurements. You'll collaborate closely with mechanical and software engineers to bring new technologies from concept to deployment while supporting and enhancing existing product lines.Key Responsibilities • Design and develop analog and digital electronic circuits, PCB layouts, and wiring harnesses for air quality and emissions monitoring systems • Create and maintain electrical schematics, BOMs, and related documentation • Collaborate with cross-functional teams to ensure seamless integration of electrical, mechanical, and software systems • Perform prototype testing, troubleshooting, and validation of electronic assemblies • Ensure designs comply with relevant safety and regulatory standards (FCC, CE, UL, etc.) • Provide technical guidance and support to internal teams and external partners on electrical systems and instrumentation • Research and evaluate components and technologies for performance, reliability, and cost optimization • Contribute to the continuous improvement of existing product designs and engineering practices Must-Have Skills and Qualifications • Bachelor's degree in Electrical Engineering or related discipline • Proficiency in PCB design software such as Altium Designer, Eagle, or KiCad • Strong understanding of analog and digital circuit design, signal conditioning, and power systems • Excellent troubleshooting and analytical skills with a hands-on approach to problem solving • Strong communication and collaboration skills across technical teams Desirable Skills • Experience with microcontrollers, data acquisition systems, and embedded electronics • Familiarity with instrumentation interfaces such as RS-232, RS-485, Modbus, and Ethernet • Experience in environmental instrumentation or sensor integration • Knowledge of EMC/EMI testing and compliance procedures What We Offer • Competitive salary and benefits package • Health, dental, and vision insurance • 401(k) with company match • Paid time off and recognized holidays • Opportunities for professional development and advancement • A mission-driven culture that values sustainability, innovation, and technical excellence This position is based at our Warren, RI headquarters. It is a hands-on and collaborative engineering role that involves close coordination with peers in design, research, and technical support.At American Ecotech, you'll play a key role in advancing environmental technology. If you are passionate about engineering, enjoy problem-solving, and want to make a measurable impact, we encourage you to apply.

Veranex A World-Class Leader in MedTech and Diagnostic Medical Device Innovation Electrical Engineer Full Time Providence, RI or Minneapolis, MN About Us: Veranex believes that the best way to impact the health and wellness of our global society is through technological innovation. We pride ourselves in taking a human-centered approach to design and deliver the highest quality products to solve healthcare's toughest problems. Despite over 30 years of experience in engineering, design, and consulting, we still embrace our start-up culture that challenges us to continually evolve the way we do business, push the boundaries of breakthrough technology, and reflect the ever-changing needs of our clients, employees, and society. We are a company of problem solvers, inventors, artists, teachers, teammates, and friends. We value that differences that make us unique and embrace different ways of thought. Our growing company offers a high-energy, high-achieving, collaborative culture that fosters a creative spirit while exceeding client expectations. We offer tremendous opportunity for professional development, rewarding projects, competitive salaries, an excellent benefits package, and summer hours! Apply and start your Veranex career journey today! Position: The Electrical Engineer helps to execute electrical design and specification activities through all phases of the product development process - from initial design to final manufacturing transfer. Reporting to the Director of Embedded Hardware, he/she stays abreast of current methods and trends in electrical engineering and electronics design within the consumer and medical industries. He/She/They will also provide robust, cost-effective electrical engineering solutions for medical products as part of Veranex's product development staff in support of clients in the U.S. and abroad. Responsibilities: Broad range of electrical engineering including experience in digital and analog circuit design, simulation, schematic capture, PCB layout, prototyping and debug. Experience with Altium schematic capture and layout is preferred Embedded system integration, test, and debug on a variety of hardware platforms including ARM based MCUs, computer on modules (COM), SBCs, and high-end MPU based designs. Development of wireless platforms (BLE, WiFi, LTE) Research, development, and testing of electrical hardware in support of numerous medical device and diagnostic programs for use in both lab and patient environments. Technologies include, but are not limited to, optics, motion control, sensors, thermal control (TEC, resistive heaters, PID control), liquid management, etc. Basic communications with internal personnel including program managers, design, mechanical, software, and electrical engineering, quality, regulatory, and research. External communication includes OEM factories, suppliers at a technical level. The ability to break down electrical engineering problems and estimate tasks is desired. Author and contribute to technical documentation including test protocols/reports, engineering studies, design documentation. Contribute to risk management documentation in support of design assurance. Familiarity with medical device, diagnostic, and EMC standards is desired (60601-1, 61010-1, 60601-1-2, 61326, and other relevant collateral and particular standards) Requirements: Energetic, holding a BSEE or related degree coupled with 2 to 8 years of electrical engineering experience, with some exposure to the medical device/equipment industry. Possess a solid familiarity with the design, manufacturing and sourcing of electrical components. Familiarity with prototyping, simulation, debug, and testing of circuits is required. Familiarity of IEC/UL-60601/61010 and related standards is beneficial. Our fast-paced environment demands the ability to manage multiple projects within various disciplines and deadlines. High-energy, self-starters with the following qualities: Good communication skills Flexibility to multi-task and perform a wide range of activities Excellent computer skills, including MS Office proficiency EQUAL OPPORTUNITY EMPLOYER At Veranex, LLC, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. Veranex believes that diversity and inclusion among our teammates is critical to our success as a company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

This position will design, develop, modify, and evaluate electronic parts, components and integrated circuitry for electronic equipment and vehicle assemblies. The candidate will oversee the design, development, and integration of commercial and custom electronic components by subcontractors and ensure the functional operation and quality of delivered parts. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Participate in the electrical integration of systems, processes, interconnections, and methodologies to ensure the performance of the total system. Use of electronic test equipment (multi-meters, oscilloscope, fiber-optic testing, etc.) Support the development, operation, and maintenance of a variety of complex technology systems applicable to marine vehicles. Preparation and interfacing of scientific equipment and sensors. Analyze existing and future power architecture, PCBs, and other components to improve system efficiency. Provides analysis related to the design, development, and implementation of electronic parts, components, or integrated circuitry for hardware systems. Select electrical components and equipment based on analysis of specifications and reliability relevant to each specific project. Develops test strategies, devices, and systems. Prepares test procedures and test reports as necessary to document designs, procedures, and results. Prepares and studies technical drawings, specifications of electrical systems, datasheets to ensure conformity to standards and effectively communicate customer requirements. Oversee and/or assist with facility electrical needs to support company operations. May use computer assisted engineering and design software and equipment to perform assignments. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes and/or airborne particles and moving mechanical parts. The noise level in the work environment can be loud. Physical Demands Must possess ability to work in a standard office environment and on production floor; use standard office equipment, including a computer; walk and climb stairs; carry supplies, equipment, and materials up to 40 lbs.; read printed materials on computer screen; and communicate in person and over the phone Position Type & Expected Work Hours This is a full-time position. Days and hours of work are Monday through Friday, 40 hours per week. This position occasionally requires long hours and weekend work. Travel Occasional local travel is expected for this position. Required Education and Experience Bachelor's degree in Electrical and/or Mechanical Engineering (1-10+) years professional mechanical/electrical experience Passion for hardware development Proficient/understand AutoCAD Proficient in Visio Experience working with underwater robotics/electronics Preferred: Not a must: Experience with 3D modeling/design/printing; integrating subsea acoustic sensors Ability to work both independently and with a team Ability to be organized and focused in a distracting environment Ability to switch gears amongst multiple tasks quickly Technical drawing production experience Design Engineering background is a plus Ability to read, write, and speak English Must be a US Citizen Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Activities, duties, and responsibilities may change at any time with or without notice. Must be able to pass a background check Must be a citizen of the United States

We are seeking an experienced Electrical Supervising Engineer to lead a team of Controls Engineers and Designers, providing on-site support for a nuclear power plant in the Detroit/Chicago/Toledo region. This role requires strong technical expertise, leadership skills, and the ability to manage complex electrical and instrumentation & control (I&C) systems in a nuclear environment. Key Responsibilities: You will oversee the preparation and approval of Engineering Change Packages, including equipment specifications, data sheets, calculations, and design documents. Your work will involve designing and configuring systems such as transformers, switchgear, motor control centers (MCCs), UPS/DC systems, and digital instrumentation. You will also perform electrical studies, including short circuit, voltage drop, coordination, and arc flash analyses using OTI-ETAP software. In addition to technical tasks, you will supervise engineers and designers, review proposals, monitor project budgets and schedules, and provide technical leadership. You will collaborate with clients, contractors, vendors, and cross-disciplinary teams to ensure project success. Requirements: A Bachelors degree in Electrical Engineering from an accredited university. At least 8 years of experience designing electrical and I&C systems for power plants or heavy industrial facilities, with 5 years specifically in nuclear plants in North America. Familiarity with nuclear design processes, IEEE, EPRI, ISA, and IAEA standards, and NRC regulatory guides. Proficiency in Microsoft Office tools (Word, Excel, PowerPoint, Visio, Teams). A Professional Engineering (PE) license in any U.S. state, with the ability to obtain licensure in other states. U.S. citizenship and the ability to obtain unescorted access to a nuclear power plant, including Fitness for Duty requirements. Skills: Expertise in design and configuration control, switchgear, MCCs, UPS/DC systems, and digital instrumentation. Strong analytical and problem-solving abilities. Excellent written and oral communication skills. Benefits: Comprehensive health, dental, and eye care coverage. Stock options. Competitive salary range of 145,000145,000165,000 per year. This is a full-time, on-site position with regular hours from Monday to Friday, 9 AM to 5 PM. If you have the skills and experience to lead in a challenging and rewarding environment, we encourage you to apply.

Rite-Solutions is currently seeking skilled and motivated candidates for a full-time Electrical Engineer position in Middletown, RI to support the Naval Undersea Warfare Center (NUWC) Code 34 Electronic Warfare (EW) Acquisition Engineering Agent (AEA). Job Description: This position will join a multi-disciplinary team and support design and development of the EW system for installation on US Navy vessels. The Electrical Engineer will develop system-level drawings, schematics, and diagrams. They will complete design of individual cable/harness assemblies. They will support development of Technical Data Packages (TDP) for various submarines and perform various tests/analysis. Duties and Responsibilities: Utilize Sensors processes and specifications to analyze data at the part, subassembly, and assembly levels Recommend acceptance or rejection of parts, subassemblies, and assemblies based on historical data and performance specifications Perform periodic audits on local data storage and integrity of data to ensure compliance with Sensors processes Create various data products (antenna manifold files, gain calibration files, etc.) Expedite the creation and publishing of data products upon request Provide support for any issues with off-site usage of data products or Fleet-accessible repository Evaluate incoming material procured for Sensors production including visual inspection, electrical testing, and any other product-specific testing requirements to determine if a part is satisfactory. Evaluate vendor-provided test data of production-related material including electrical data, RF data, and any other product-specific data and provide recommendations of acceptance or rejection of production-related material including performance impacts of any discovered non-conformances Provide production support and recommendations to Sensors production team regarding assembly concerns and complications during assembly of Sensors products Assist with troubleshooting during the production and repair of subassemblies and assemblies Provide review and redline of performance specifications of Sensors products as related to electrical and RF properties, as necessary Provide evaluation of fielded Sensors products for compliance with electrical/RF-related specifications and report any deficiencies or concerns Coordinate evaluation and repair of Sensors production-related material, specifically to include electrical and RF parts Perform peer review on newly created or revised engineering drawings prior to release. Peer review includes electrical/RF specification review, notes review, and general drawing conformance review. Provide support to various shipyard and waterfront locations in the testing of various Sensors products. This support includes bench-level testing and platform testing for installed systems Perform variety of cable designs (RF, fiber, copper, etc.) within military specification Requirements/Skills: Bachelor's Degree and or equivalent Navy experience Active Department of Defense secret security clearance Understanding of microwave/RF engineering specifically microwave network analysis and microwave systems Proficiency with various test, measurement, and diagnostic equipment (TMDE) including multimeters, oscilloscopes, power supplies, and other common laboratory equipment Proficiency in Matlab or similar toolsets to support data analysis and processing. Experience working with RF test equipment such as Field Fox, network analyzers (NA), spectrum analyzers (SA), and noise figure meters (NFM) Ability to communicate, both orally and in writing, to all levels of the customer organization is required Exceptional organizational & critical thinking skills, as well as an unwavering attention to detail are required Ability to follow Standard Operating Procedures (SOPs), meet deadlines, and multi-task in a fast-paced environment May require up to 10% travel 3-5 years experience with submarine systems Bachelor's Degree in Electrical/Electronics/Computer Engineering Advanced proficiency with MS Excel, Word, Visio, and PowerPoint Who are we? Rite-Solutions, Inc. is a CMMI Level III and CMMC 2.0 Level 2 certified organization. We are innovative, growing and adhere to the highest standards for handling controlled unclassified information (CUI). We value the experience of the employee, their wellbeing, and their goals on a personal professional level as part of the key fabric in building and maintaining a culture rich experience for the employee and their family. This commitment to our company and our employees has been recognized as we were awarded: "Great Place to Work" Certification in 2022, 2023, 2024, and 2025; and Hire VETs Medallion Award in 2021, 2022, 2023, 2024, and 2025! All positions require a pre-employment background check. As an EOE/AA employer, Rite-Solutions will not discriminate in its employment practices due to an applicant's race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status. Public Information

duties and Responsibilities: Design system modernization and capabilities expansions to meet emerging Navy needs Analysis for and development of Engineering Change Instructions and Engineering Change Proposals Assess installation and system requirements to determine equipment layout Perform and presentation of gap, fault/failure, and performance analyses Support/perform modeling, simulation and prototyping for enhanced and new systems Provide recommendations for process improvements to existing systems and operational processes Troubleshoot, recommend solutions for maintenance and enhancements to Non Propulsion Submarine/Ship systems including Combat Systems and associated Weapons (Torpedoes, Missiles, Other Payloads) in particular, as well as, Launchers, Sonar, Radar, Periscopes, EW, Navigation systems interfaces at NUWCDIVNPT and/or on-site platforms Conduct test and evaluation and quality assessments for system requirements compliance, interoperability, reliability and cyber invulnerability Develop reports and recommendation papers describing results of analyses, testing and problem investigations Coordinate with Team Lead and work with the engineering team to support upgrades to existing weapon systems to meet data requirements Collect and assess technical data associated with planned, active, and concluded platform Modernization and TEMPALT installation activities, including Pre-Installation Check-Outs (PICOs) and Post-Installation System Operational Verification Tests (SOVTs) Develop, update, and deliver individual and cumulative reports to document the installation activities including status, test results, and issues. Document and present trade studies as to the risks, benefits, feasibility of future systems Develop and Review drawing packages Coordinate and support platform technical data package development and delivery Develop and review test plans, test procedures, and requirements traceability matrices Developing Concept of Operations (CONOPS) documentation, performance specifications, interface documentation, operational procedures Perform and/or support, functional, integration, system, factory acceptance and environmental testing events Develop program status reports such as technical assessments, risk assessments, technical recommendations, or technical information Assess current system capabilities against current and near-term needs and provide technical recommendations to resolve gaps by evaluating and resolving system failure reports, obsolescence and material support issues, and other inputs from the Fleet Requirements/Skills: Bachelor's degree in an Engineering Discipline (Electrical, Mechanical, Systems, etc.) preferred, will consider a BS in STEM fields with sufficient direct Engineering Experience. In lieu of a degree, candidates with significant, demonstrated experience operating one of more of DoD and Navy Non-Propulsion Electronic-Mechanical Systems especially, Combat Control, Weapons (Torpedoes, Missiles, Payloads), Launcher, USW Sensor, Electronic Warfare, Imaging, and/or Radar systems (especially Submarine specific equipment) will be strongly considered. Experience and knowledge associated with engineering functions related to design, troubleshooting, analysis, reporting, and/or testing of aforementioned complex systems Candidates must be able to work independently, collaboratively, and interface regularly with a wide range of client personnel. Proficiency with MS office applications, especially Word, Excel, and PowerPoint, as well as Adobe Acrobat and MATLAB. Mentor technical team members and provide direct technical team tasking/scheduling guidance. Support scheduling, funding, and resource needs in conjunction with Program Manager U. S. Citizenship and ability to obtain and maintain a Department of Defense secret security clearance. An active security clearance is preferred. Working Place: Newport, Rhode Island, United States Company : Rite Solutions

McLaughlin Research Corporation has an immediate opening for a Mid-Level Electrical Engineer supporting the Naval Undersea Warfare Center (NUWC) Division Newport. The Naval Undersea Warfare Center (NUWC) is the United States Navy's full-spectrum research, development, test and evaluation, engineering and fleet support center for submarines, autonomous underwater systems, and offensive and defensive weapons systems associated with undersea warfare. The qualified individual will have programming experience using C++ and MATLAB. Experience with Arduino and Raspberry Pi systems is preferred. This position will provide system support for material reverse-engineering and exploitation projects to determine characteristics, capabilities, and limitations of said systems. Requirements Bachelor's level degree in Electrical/Electronics Engineering. 3-5 years experience Experience with testing hardware on US ranges is a plus. C++, MATLAB, Arduino and Raspberry Pi experience Secret level clearance. Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination.

As part of our Corporate Engineering team the Control Systems Engineer II will participate in project teams to design, purchase, and install equipment. They will assist Plants in troubleshooting and problem solving when called upon as well as design processes for potential projects. Main Duties or Responsibilities: Design and draft elements relating to projects for implementation. Contact manufacturers and vendors for materials required to support proposed design. Receive quotes and delivery schedules on projects. File documentation of engineering drawings. Ensure Company safety procedures are being adhered to. Writing Ladder Logic on new projects and existing equipment. Perform HMI design. Perform basic computer system design - Web Gateway, Virtualization etc Perform basic network design on new projects and system upgrades. Provide technical support for facilities worldwide. Perform additional duties and responsibilities as assigned. Perform Control Cabinet Design Participate in maintenance as needed. Skills & Experience or Qualifications: Bachelor's Degree in Electrical Engineering or equivalent experience in a field of study such as electrical, computer systems. Position requires between 5-7 years of engineering experience Strong Skills in Ladder Logic, preferably with Allen Bradley systems. ie. PLC 5, SLC and Control Logix. Strong Skills in Solidworks Electrical Strong Skills in HMI design, preferably with FactoryTalk and Ignition Ability to help evaluate project requirements and apply the appropriate solutions. Strong Skills with Ethernet/IP and basic networking best practices. Understanding of plant power distribution equipment and controls. Understanding of project engineering/project management. Strong Code skills - Python and Java Must combine problem-solving techniques with innovation for best solutions. Must be able to look at the big picture as well as the details. This type of analysis and decision-making is needed daily. Travel - estimated 30% with some weekend overnights Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards Must be able to lift and carry up to 50 lbs. Ability to perform duties under specific time requirements Ability to adapt to changing duties and responsibilities Must be able to talk, listen and speak clearly on telephone

MIKEL invests in people and technology - empowering the creative process, building responsive relationships, and propelling innovative solutions from conception to completion for the U.S. Navy. MIKEL is a woman owned small business that has been providing Undersea Warfare Solutions to the Department of Defense since the company's inception in 1999. Be a part of our dynamic team whose solutions and services enable the Navy to solve their toughest problems and meet their mission requirements. We have undersea operations experience, combined with engineering and specific subject matter expertise, that provides an in-depth understanding of the problem and a novel, innovative and cost-effective solution. MIKEL is committed to providing an environment that challenges its employees to use and advance their skills and knowledge to provide solutions that exceed customer expectations. Position: Electronics Repair Engineer Nature of Role: Provide support with electronics evaluation and repair and In-Service Engineering support for Naval Electronics Systems in Fall River MA and Newport RI. The qualified candidate will perform multi-faceted tasking with emphasis on electronics evaluation/testing/repair, and US Naval fleet support. Responsibilities: include but are not limited to: * Receive, process and track electronic assemblies from US Naval sources * Inspect, Evaluate, Troubleshoot and Repair electronic assemblies, at the component level, in accordance with US NAVY and local work instructions * Develop/Update Technical Data Packages for conducting evaluations and repairs * Develop/Update local work instructions for conducting evaluations and repairs * Conduct receipt inspection of materials and parts * Maintain and conduct audits on, material and repair parts inventories * Perform research and purchases of repair parts * Maintain proprietary laboratory test units and systems to ensure all testing devices are in proper operating condition and ready for immediate use * Prepare/Maintain reports and written laboratory procedures to reflect the current and up-to-date standards and practices * Provide In-Service Engineering Support to US Naval Ships and Submarines * Develop relationships with Government customers and source new work Requirements: * Ability to Obtain/maintain SECRET Clearance. * Effective communication, both verbal and written. * Possess ability to work in a team environment. * Complete tasks in a timely manner to support repair deadlines and/or ship's schedules. * Possess exceptional organizational, critical thinking skills, and attention to detail. * Proficiency in MS Office Suite, with emphasis on Microsoft Word, Excel and PowerPoint * Ability to communicate, both orally and in writing, with all levels of the contractor and government/military organization * Ability to operate various types of electronic test equipment (Digital multi meter, oscilloscope, signal injector…) * Ability to read and comprehend electronics schematics and diagrams * Ability to conduct precision hand soldering of "through-hole" and "surface-mount" electronic components on multi-layer circuit cards * Ability to lift 40 lbs * This work may require travel (less than 10%) Experience: * 10 + years related electronics experience * Knowledge of US Government depot level repair policies and practices * Familiarity with Navy funding sources * Knowledge of AC and DC voltage circuits, concepts, troubleshooting, and measurement * Experience with soldering wires & terminals, through hole and surface mount components * Experience with de soldering methods and circuit card preservation practices. * Knowledge of logic circuits, and devices * Familiarity with various types of computer hardware and software is desired Work Location: Fall River MA/Newport RI, minimal-to-no telework available. MIKEL offers a competitive salary and a comprehensive benefits package that includes Medical/Dental/Vision Insurance, Flexible Spending Account (FSA), 401k Retirement Plan, Life Insurance, Disability Insurance, Paid Time Off (PTO), and Tuition Reimbursement. Department of Defense Secret Security Clearance or higher is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. MIKEL is an Equal Opportunity Employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Tele-Consultants, Inc. (TCI) is seeking an Electrical or Systems Engineer to join our team in support of the Naval Undersea Warfare Center Division Newport (NUWCDIVNPT). Job responsibilities include, but are not limited to: • The candidate will work directly with NUWC Engineers reviewing engineering drawings developed according to design specifications; • Review, comment and adjudicate engineering drawing packages and related documentation; • Analyze, design, and review communications systems designs to ensure that the design requirements are met. Education: • Minimum of Bachelor's degree in Electrical, Electronics or Systems Engineering from an accredited university; • Experience with engineering and Design Drawings. Additional Qualifications: • Any relevant experience with Common Submarine Radio Room (CSRR), Consolidated Afloat Networks and Enterprise Services (CANES) and/or Automated Digital Network Systems (ADNS) is a big PLUS! • Experience with Submarine Electronics, QA Material Process; • Experience with Test Equipment including O'scope, spectrum analyzers, signal generator, and network analyzers; • Proficiency with Microsoft Office products; • Proficiency with the MS Visio drawing software and any CAD software also a PLUS! The nature of this position requires U.S. citizenship and the ability to pass a thorough background investigation. The primary location for performance of the work will be in Newport, RI with very limited travel, if any, required within the continental United States. We offer a competitive compensation commensurate with the technical and professional qualifications, a great benefits package, and an excellent work environment. As a federal government contractor, we participate in the e-Verify program. If you possess the qualifications for this position and you're ready to join a team of professionals committed to supporting our DoD clients by providing the outstanding level of service they've come to expect, we want to hear from you. Tele-Consultants, Inc. is an Equal Employment Opportunity Employer.

Job Description At REGENT, we're on a mission to revolutionize regional transportation between coastal cities. We're not just building vehicles, we're creating a new category of transportation: the seaglider. These groundbreaking wing-in-ground-effect craft travel just above the water's surface, combining the speed of an airplane with the low operating costs of a boat. Capable of 180 miles at 180 mph on today's battery tech (and up to 400 miles with next-gen batteries), seagliders will unlock fast, affordable, and sustainable coastal transit for passengers and cargo - connecting cities, islands, and communities like never before. Backed by leading investors and powered by a team of passionate, forward-thinking engineers, builders, and operators, we're now scaling from a breakthrough prototype to full production - and building the team to make it happen. Role Overview As an Electrical Engineering Intern at REGENT, you will work at the intersection of the systems that power, move, and control our seagliders. This multidisciplinary role is primarily focused on electrical engineering, with direct exposure to propulsion and actuation systems that push the boundaries of high-performance maritime aviation. You'll support the design, integration, and testing of critical vehicle subsystems-from high-voltage distribution to electromechanical actuators to power-dense propulsion hardware. If you're energized by working at the intersection of cutting-edge innovation, real-world impact, and hands-on engineering, you'll be in the right place - and we'd be thrilled to have you on the team! What You'll Do As an intern in this role, you may: Electrical Systems Support design, layout, and documentation for HV/LV power distribution and signal networks Develop and test custom PCBs for sensing, control, and actuation Build, route, and validate wire harnesses across electrical, propulsion, and actuation subsystems Create and maintain schematics, harness drawings, and test documentation Propulsion & Actuation Assist with the electrical integration of propulsion and actuation systems Support testing of motors, actuators, and power electronics with a focus on instrumentation and safety Troubleshoot hardware issues on benches, in the lab, and on the vehicle Simulation, Testing & Tools Use modeling/analysis tools (MATLAB/Simulink, LabVIEW, etc.) to evaluate system performance Build and improve test setups, benches, and automated test equipment Capture and analyze data to support subsystem validation What You'll Bring Currently pursuing a degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or similar Experience with electronics lab tools (oscilloscope, power supplies, DMMs, loads, soldering tools) Understanding of digital, analog, or power electronics fundamentals Ability to interpret electrical schematics and/or mechanical drawings Interest in multidisciplinary engineering across electrical, mechanical, and control systems Bonus Experience Experience with motors, actuators, sensors, or motor controllers Familiarity with Python, MATLAB, or similar tools Exposure to PCB design tools (Altium, KiCad, Eagle) Comfort with high-voltage or high-power systems Who We're Looking For Collaborative Team Player: You believe that great things happen when teams work together. You communicate effectively and collaborate with engineers, stakeholders, and other cross-functional teams to align on goals and move projects forward. You bring people together, ensuring that everyone is on the same page and moving towards a shared vision. Creative Problem Solver: You thrive on tackling complex challenges and finding innovative solutions. Whether you're resolving installation challenges, debugging elusive electrical issues, or adapting on the fly during integration and test, you bring a practical, inventive mindset to every problem. You don't just patch issues - you improve processes, anticipate downstream impacts, and help turn one-off fixes into scalable solutions that raise the bar for future builds. Adaptable & Agile: In a fast-paced, ever-evolving startup environment, you quickly adapt to changing priorities and requirements. You approach challenges with a calm, resilient mindset, and know how to pivot and adjust your approach as needed, ensuring that progress continues without missing a beat. Innovative Mindset: You're driven by curiosity and a passion for technology. You're passionate about driving continuous improvement, embracing new technologies and methodologies to enhance efficiency, quality, and team performance. What We Offer Competitive compensation Housing Stipend available for those temporarily moving to join our team Daily, free catered lunches Learning & professional development opportunities Meaningful projects that make an impact Mentorship & guidance from experienced team members If you're ready to take on an exciting challenge, grow with us, and make a lasting impact, we want to hear from you. Even if you don't meet every requirement, but you see yourself contributing to our mission, we encourage you to apply! We value diverse skillsets and experiences and believe in the potential of passionate individuals to make a big impact. Equal Opportunity Employer REGENT is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or any other characteristic protected by law.

Skanska is searching for a dynamic Project Engineer. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. The Project Engineer works within the Project Management Team which is responsible to plan and oversee the project to ensure a timely and cost-effective outcome. This includes budgeting, organization, implementation, and scheduling of the project. Ensure the project is constructed in a safe, ethical manner and in compliance with all federal, state, and local laws. The Project Management Team can vary greatly depending on the size and complexity of the projects, which in turn will affect the number of responsibilities the Project Engineer will be involved in. **Project Engineer Qualifications:** + Bachelor's Degree - Construction or Engineering preferred or equivalent experience. + 5 years prior relevant experience. + Understands basic management approaches such as work scheduling, prioritizing, coaching and process execution. + Broad job knowledge of technical or operational practices within assigned discipline. **Project Engineer** Benefits (********************************************************************************************************************************************************************************************* **of Working at Skanska:** + Competitive Salary range (based on experience) + Excellent Insurance Package + 401k w/match and Excellent Employee Stock Purchase Plan + An amazing culture focused on Diversity and Inclusion Our work makes a clear contribution to society and the environment around us. Whether we are building schools to provide inspiring spaces for learning, roads to connect communities or hospitals to care for patients, it all contributes to our purpose - we build for a better society. Skanska's values (***************************************************************************** -Be Better Together, Act Ethically and Transparently, Commit to Customer and Care for Life-are deeply engrained in how we work, which is why our values support and drive our D&I efforts. We are on a D&I (****************************************************************************** journey that is ongoing. It is a journey of continuous improvement-while we have come a long way, we still have more to go. **Come work with us and join a winning team!** **Background Check Required** Skanska is an Equal Employment Opportunity (EEO) Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, citizenship, protected veteran status, or any other categories protected under applicable federal, state, and local laws. Skanska Equal Employment Opportunity Skanska uses knowledge & foresight to shape the way people live, work, and connect. More than 135 years in the making, we're one of the world's largest construction and project development companies. With operations in select markets throughout the Nordics, Europe and the United States, global revenue totaled $15.9 billion in 2024. Skanska in the U.S. operates 28 offices across the country, with its headquarters in New York City. In 2024, the U.S. construction sector generated $8.2 billion in revenue, and the U.S. development sector's net investments in commercial projects totaled $224 million. Together with our customers and the collective expertise of our 6,300 teammates in the U.S. and 26,300 globally, we create innovative and sustainable solutions that support healthy living beyond our lifetime. Skanska's Applicant Privacy Policy for California Residents (****************************************************************************************************************** **Search Firm and Employment Agency Disclaimer** _Search Firm and Employment Agency Disclaimer Skanska USA Human Resources ("Skanska HR") provides HR services to the Skanska business units within the U.S.A. including Skanska USA Civil Inc., Skanska USA Building Inc., Skanska USA Commercial Development Inc. and Skanska Infrastructure Development Inc. (collectively "Skanska USA"). As such, Skanska HR is the sole authorized representative of Skanska USA to execute any agreements with search firms, employment agencies or any employment vendor ("Vendor"). As a condition precedent to any entitlement for payment, a Vendor shall have both (1) Skanska USA Placement Agreement, and (2) an Engagement Job Order executed by an authorized Skanska HR representative. Absent the properly executed documents, Skanska HR shall have no obligation to make payment to the Vendor. Verbal or written communications from any employee of Skanska USA business units shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be considered property of Skanska HR._

**What Commercial Technologies Software Engineering contributes to Cardinal Health** Commercial Technologies manages the enterprise's portfolio of commercial technologies to maximize the business value of the technologies and enhance the customer experience. This function creates strategies for the portfolio and innovative solutions based on relationships with business leaders, develops back-end solutions and capabilities, and improves the front-end experience. Commercial Technologies Software Engineering develops design options, process improvements and back-end solutions for commercial technologies to maximize performance and suitability for business needs. This job family manages engineering projects and plans for commercial technologies and interfaces with product managers to develop objectives. This job family assesses product systems, identifies opportunities for process and system improvements, and develops solutions through application of engineering principles. **Responsibilities** + Responsible for designing, developing, implementing, and supporting applications, systems and IT products required to achieve business objectives. + Plans and executes system implementations that ensure success and minimize risk of system outages or other negative production impacts. + Demonstrates problem solving ability that allows for effective and timely resolution of system issues including but not limited to production outages. + Analyze production system operations using tools such as monitoring, capacity analysis and outage root cause analysis to identify and drive change to ensure continuous improvement in system stability and performance. + Provide technical guidance to managed service partners. + Participate in code and design planning/reviews to ensure industry standards and best practices are being met + Establish and develop relations with business stakeholders + Design & customize technological systems and platforms to improve customer experience + Ensure aligned objectives and execution across internal and external stakeholders to create mutually beneficial partnerships to identify areas of growth and innovation + Advise on short and long term technology and growth planning + Ensure product and services are compliant with company's policies + Manage strategic partnerships with preferred technology vendors + Recommends new practices, processes, metrics, or models + Must be able to define tasks, milestones, and deliverables that meet stated project objectives + Independently determines method for completion of new projects + Serve as an escalation point for complex functional and technical issues + Provide end-to-end views on how all components fit together + "Connecting dots" across various business and technology areas **Qualifications** + 4-8 years of experience, preferred + Bachelor's degree in related field, or equivalent work experience, preferred + Experience in T-SQL, Windows Servers, .Net, Azure Logic Apps & pipelines, Swaggerhub, APIGEE, Splunk, Postman, Azure devops + Experience with GuardianRX, Cperx, Queen City, CMS Wordlink, Omnisys, and Genesis a PLUS + Experience in designing, building, deploying, managing, and enhancing applications within the Software Development Life Cycle (SDLC) processes including requirement analysis and system design, and/or software engineering principles + Experience with CI/CD pipelines such as Azure Dev Ops, GIT + Working experience translating business objectives into Strategic technology plans + Strong leadership skills, including the ability to effectively partner with business leadership and key business stakeholders. + Strategic mindset and ability to lead with business objectives + Strong understanding of infrastructure platforms such as operating systems, databases, application servers, cloud. + Strong understanding of industry trends and relevant emerging technologies + Strong problem solving and analytical skills, and the ability to communicate technical information to both technical and non-technical users across various domains. + Perspective on industry-wide best-practices + Experience in Healthcare industry a plus + Experience in data analytics and/or data science a plus + Enterprise or Solution Architecture experience a plus **What is expected of you and others at this level** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **Anticipated salary range:** $93,500 - $140,280 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 10/30/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Job SummaryRDSI has an opening for a mid-to-senior level Electronics Engineer. The successful candidate will provide technical support for developmental and legacy Navy electronic systems. Responsibilities Develop and review schematic diagrams. Able to handle multiple tasks concurrently. Develop test plans and procedures. Develop system and unit-level performance specifications. Mentor less experienced electrical engineers. RequirementsMust have minimum experience with one or more of the following work areas: Able to read and comprehend wiring diagrams and schematics. Experience in RF Engineering. Perform system integration tasks. Perform system and reliability analysis. Qualifications BS or MS in Electrical Engineering and minimum 5 years' experience in RF System Engineering or equivalent. Must be well versed in the use of Microsoft Office Outlook, Word, Excel, and Power Point. Excellent oral and written skills. Must possess good interpersonal skills. Background in Military Communication, EW, or Radar Systems. Must have or be able to obtain a Security Clearance. Applicants selected will be subject to a security investigation and must meet eligibility requirements for access to classified information RDSI is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

MIKEL invests in people and technology - empowering the creative process, building responsive relationships, and propelling innovative solutions from conception to completion for the U.S. Navy. MIKEL is a woman owned small business that has been providing Undersea Warfare Solutions to the Department of Defense since the company's inception in 1999. Be a part of our dynamic team whose solutions and services enable the Navy to solve their toughest problems and meet their mission requirements. We have undersea operations experience, combined with engineering and specific subject matter expertise, that provides an in-depth understanding of the problem and a novel, innovative and cost-effective solution. MIKEL is committed to providing an environment that challenges its employees to use and advance their skills and knowledge to provide solutions that exceed customer expectations. Position: Electronics Repair Engineer Nature of Role: Provide support with electronics evaluation and repair and In-Service Engineering support for Naval Electronics Systems in Fall River MA and Newport RI. The qualified candidate will perform multi-faceted tasking with emphasis on electronics evaluation/testing/repair, and US Naval fleet support. Responsibilities: include but are not limited to: Receive, process and track electronic assemblies from US Naval sources Inspect, Evaluate, Troubleshoot and Repair electronic assemblies, at the component level, in accordance with US NAVY and local work instructions Develop/Update Technical Data Packages for conducting evaluations and repairs Develop/Update local work instructions for conducting evaluations and repairs Conduct receipt inspection of materials and parts Maintain and conduct audits on, material and repair parts inventories Perform research and purchases of repair parts Maintain proprietary laboratory test units and systems to ensure all testing devices are in proper operating condition and ready for immediate use Prepare/Maintain reports and written laboratory procedures to reflect the current and up-to-date standards and practices Provide In-Service Engineering Support to US Naval Ships and Submarines Develop relationships with Government customers and source new work Requirements: Ability to Obtain/maintain SECRET Clearance. Effective communication, both verbal and written. Possess ability to work in a team environment. Complete tasks in a timely manner to support repair deadlines and/or ship's schedules. Possess exceptional organizational, critical thinking skills, and attention to detail. Proficiency in MS Office Suite, with emphasis on Microsoft Word, Excel and PowerPoint Ability to communicate, both orally and in writing, with all levels of the contractor and government/military organization Ability to operate various types of electronic test equipment (Digital multi meter, oscilloscope, signal injector…) Ability to read and comprehend electronics schematics and diagrams Ability to conduct precision hand soldering of “through-hole” and “surface-mount” electronic components on multi-layer circuit cards Ability to lift 40 lbs This work may require travel (less than 10%) Experience: 10 + years related electronics experience Knowledge of US Government depot level repair policies and practices Familiarity with Navy funding sources Knowledge of AC and DC voltage circuits, concepts, troubleshooting, and measurement Experience with soldering wires & terminals, through hole and surface mount components Experience with de soldering methods and circuit card preservation practices. Knowledge of logic circuits, and devices Familiarity with various types of computer hardware and software is desired Work Location: Fall River MA/Newport RI, minimal-to-no telework available. MIKEL offers a competitive salary and a comprehensive benefits package that includes Medical/Dental/Vision Insurance, Flexible Spending Account (FSA), 401k Retirement Plan, Life Insurance, Disability Insurance, Paid Time Off (PTO), and Tuition Reimbursement. Department of Defense Secret Security Clearance or higher is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. MIKEL is an Equal Opportunity Employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

At REGENT, we're on a mission to revolutionize regional transportation between coastal cities. We're not just building vehicles, we're creating a new category of transportation: the seaglider. These groundbreaking wing-in-ground-effect craft travel just above the water's surface, combining the speed of an airplane with the low operating costs of a boat. Capable of 180 miles at 180 mph on today's battery tech (and up to 400 miles with next-gen batteries), seagliders will unlock fast, affordable, and sustainable coastal transit for passengers and cargo - connecting cities, islands, and communities like never before. Backed by leading investors and powered by a team of passionate, forward-thinking engineers, builders, and operators, we're now scaling from a breakthrough prototype to full production - and building the team to make it happen. Role Overview As an Electrical Engineering Intern at REGENT, you will work at the intersection of the systems that power, move, and control our seagliders. This multidisciplinary role is primarily focused on electrical engineering, with direct exposure to propulsion and actuation systems that push the boundaries of high-performance maritime aviation. You'll support the design, integration, and testing of critical vehicle subsystems-from high-voltage distribution to electromechanical actuators to power-dense propulsion hardware. If you're energized by working at the intersection of cutting-edge innovation, real-world impact, and hands-on engineering, you'll be in the right place - and we'd be thrilled to have you on the team! What You'll Do As an intern in this role, you may: Electrical Systems * Support design, layout, and documentation for HV/LV power distribution and signal networks * Develop and test custom PCBs for sensing, control, and actuation * Build, route, and validate wire harnesses across electrical, propulsion, and actuation subsystems * Create and maintain schematics, harness drawings, and test documentation Propulsion & Actuation * Assist with the electrical integration of propulsion and actuation systems * Support testing of motors, actuators, and power electronics with a focus on instrumentation and safety * Troubleshoot hardware issues on benches, in the lab, and on the vehicle Simulation, Testing & Tools * Use modeling/analysis tools (MATLAB/Simulink, LabVIEW, etc.) to evaluate system performance * Build and improve test setups, benches, and automated test equipment * Capture and analyze data to support subsystem validation What You'll Bring * Currently pursuing a degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or similar * Experience with electronics lab tools (oscilloscope, power supplies, DMMs, loads, soldering tools) * Understanding of digital, analog, or power electronics fundamentals * Ability to interpret electrical schematics and/or mechanical drawings * Interest in multidisciplinary engineering across electrical, mechanical, and control systems Bonus Experience * Experience with motors, actuators, sensors, or motor controllers * Familiarity with Python, MATLAB, or similar tools * Exposure to PCB design tools (Altium, KiCad, Eagle) * Comfort with high-voltage or high-power systems Who We're Looking For * Collaborative Team Player: You believe that great things happen when teams work together. You communicate effectively and collaborate with engineers, stakeholders, and other cross-functional teams to align on goals and move projects forward. You bring people together, ensuring that everyone is on the same page and moving towards a shared vision. * Creative Problem Solver: You thrive on tackling complex challenges and finding innovative solutions. Whether you're resolving installation challenges, debugging elusive electrical issues, or adapting on the fly during integration and test, you bring a practical, inventive mindset to every problem. You don't just patch issues - you improve processes, anticipate downstream impacts, and help turn one-off fixes into scalable solutions that raise the bar for future builds. * Adaptable & Agile: In a fast-paced, ever-evolving startup environment, you quickly adapt to changing priorities and requirements. You approach challenges with a calm, resilient mindset, and know how to pivot and adjust your approach as needed, ensuring that progress continues without missing a beat. * Innovative Mindset: You're driven by curiosity and a passion for technology. You're passionate about driving continuous improvement, embracing new technologies and methodologies to enhance efficiency, quality, and team performance. What We Offer * Competitive compensation * Housing Stipend available for those temporarily moving to join our team * Daily, free catered lunches * Learning & professional development opportunities * Meaningful projects that make an impact * Mentorship & guidance from experienced team members If you're ready to take on an exciting challenge, grow with us, and make a lasting impact, we want to hear from you. Even if you don't meet every requirement, but you see yourself contributing to our mission, we encourage you to apply! We value diverse skillsets and experiences and believe in the potential of passionate individuals to make a big impact. Equal Opportunity Employer REGENT is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or any other characteristic protected by law.