Electrical engineer jobs in Riverside, CA - 944 jobs

Senior RF Engineer Orange County, CA Our exciting Space client are looking for an RF engineer to be responsible for the RF design for a remote sensing payload, this roles responsibility includes the concept of operations (CONOPS) for the payload on the bus given on orbit constraints such as power, attitude, thermal loads. Being responsible for all aspects include the ground processing. With support as needed from the SAR/DevOps team, they will be responsible for designing and developing the ground-based solution that would work with various ground systems. Success in this role requires someone with very detailed experience with both SAR theory as well as hands on design experience for both the hardware and software. They will need to be a self-starter with strong initiative to assist in planning out the direction, executing on the plan, then adjusting the plan when unknowns become knowns. Key Responsibilities: Analyze and optimize RF design for Synthetic Aperture Radar (SAR) payloads while collaborating with cross-functional teams to meet project specifications Lead the design of complex systems involving high-speed digitizers, low-noise RF circuits, FPGAs, and embedded processors Work closely with SAR Engineers to test and validate SAR payloads and data collections Conduct detailed RF analysis for antennas and antenna arrays Create RF subsystem requirements and derive engineering requirements to meet project goals Perform microwave analysis using Python or similar tools Generate documentation and effectively communicate technical information to audiences of varying technical ability Contribute technical writing to RFIs, RFPs, and other business capture activities Ideal Qualifications: Advanced degree in Electrical Engineering, Computer Engineering, or similar field 8+ years of experience in a similar engineering role (RF Engineering, Electrical Engineering) 4+ years of experience in a spacecraft engineering discipline 4+ years of experience in high-speed electronics and RF design Experience in anechoic testing with phased antenna arrays Expertise in RF test automation and data analysis Expertise in electromagnetics, RF, and antenna theory Familiarity with SAR imaging concepts and system design Mastery of signal processing fundamentals, including the manipulation of complex-valued data Preferred Qualifications: 4+ years of hands-on experience in SAR payload design and integration Experience with assembly, integration, and testing for spacecraft/payloads Experience with embedded programming (C/C++) and FPGA design tools (Verilog/VHDL) Background in software configuration management (SCM) and CI/CD pipelines Experience in Python or scripting languages for test automation Experience with formal verification and validation of space-rated systems Due to Import control requirements candidates will need to be Must be a US person with a current TS/SCI clearance or ability to pursue one.

We are looking to bring on a senior-level Electrical Engineer to join a technical consulting team that works across a wide range of building types and industries. This role is ideal for someone who is confident in the field, strong in electrical fundamentals, and comfortable delivering clear, defensible engineering opinions to clients and legal teams. The work focuses on investigating electrical system failures and damage, determining cause and responsibility, and supporting complex matters that may involve insurance claims, disputes, or litigation. Assignments span commercial, industrial, infrastructure, municipal, and residential facilities. Responsibilities Perform on-site investigations of electrical systems and equipment to document existing conditions and damage following loss events such as fires, floods, storms, and equipment failures Analyze electrical components and systems to determine cause, origin, and contributing factors related to design, installation, construction practices, or product performance Apply applicable electrical and building codes to develop repair scope recommendations and support technical conclusions Review construction documents, drawings, specifications, and records to evaluate compliance with design intent and industry standards Provide electrical support to fire origin and cause investigations when electrical involvement is suspected Prepare clear, well-organized technical reports explaining findings, opinions, and recommendations Communicate regularly with clients, contractors, attorneys, and code officials to address technical issues and project needs Manage multiple active assignments while meeting schedules, budgets, and quality expectations Support the development and maintenance of client relationships Travel as required, sometimes on short notice Qualifications Bachelor of Science degree in Electrical Engineering from an ABET-accredited program Licensed Professional Engineer in California, with additional state licenses or the ability to obtain them preferred Minimum of seven years of electrical engineering experience, including design, field investigation, forensic work, or related technical roles Strong working knowledge of electrical and building codes including NEC, NFPA, and ICC standards Solid understanding of electrical systems, equipment, and construction practices across multiple facility types Hands-on field experience evaluating electrical systems and equipment in real-world conditions Experience estimating electrical repair or replacement scope is a plus Strong written and verbal communication skills, with the ability to explain technical issues to non-technical audiences Experience supporting litigation, including depositions, mediation, arbitration, or trial, is desirable Existing client relationships or business development experience is a strong advantage

HCLTech is looking for a highly talented and self-motivated Electrical Design Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Electrical Design Engineer Position Type: Fulltime Location: Irvine, CA Key Responsibilities: Core Expertise End-to-end New Product Development (NPD) experience including system architecture, design, rapid prototyping, integration, testing, V&V, and design transfer. Strong knowledge of medical capital systems product lifecycle and disposables (e.g., catheters, endoscopes, pumps). Hands-on design experience in analog and digital board design involving microprocessors, microcontrollers, memory, sensors, and amplifiers. Proficiency in interface protocols such as I²C, UART, SPI, USB, and PCI. Expertise in high-density cable design, harnessing, and cabling. Tools & Standards Skilled in ECAD tools (OrCAD, Allegro) for schematic generation and PCB layout, including DFx and Gerber release. Experience in component engineering and BOM creation for prototype, pilot, and production phases. Strong understanding of IEC 60601, FDA submission requirements, and medical regulatory standards. Familiarity with VAVE analysis, vendor qualification, and supplier discussions. Testing & Validation Proficient in using test equipment such as oscilloscopes, multimeters, flow meters, and signal analyzers for troubleshooting and validation. Ability to draft test protocols, generate reports, and perform bench testing, system characterization, and verification. Soft Skills Excellent communication skills and ability to collaborate effectively with cross-functional teams. Strong problem-solving mindset and attention to detail. Education & Experience Bachelor's degree in Electrical Engineering or equivalent (Master's preferred). Minimum 5+ years of relevant experience in electrical design and development. Pay and Benefits Pay Range Minimum: $85000 per year Pay Range Maximum: $130000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Visium Resources has been asked to identify qualified candidates for this Electrical Designer/Drafter position. This position is a contract opportunity which is expected to be on-site in Anaheim, CA for a duration of 18 Months+. Architecture & Facilities Engineering (A&FE) is looking for an Electrical Designer/Drafts person to support the development and sustainment of the electrical distribution systems throughout the work environment. Our department supports the facility, attractions, entertainment, foods, and merchandise maintenance teams. You will support maintenance teams, minor system modifications and immediate response efforts. The objective of this position is to update facility drawings through drawing research and field verification. These drawings include electrical one-line diagrams, equipment layout and elevation drawings, motor control drawings, system control drawings etc. This role also involves close collaboration with other engineering disciplines and multiple project teams. Responsibilities Perform site visits for the retrieval of field data and the verification of existing drawings including details, measurements, existing conditions, product data. Coordinate and execute the update and correction of electrical one-line drawings, equipment layout and elevation drawings, motor control drawings, system control drawings and other electrical drawings as needed. Perform work that maintains design standards. Help coordinate photo documentation required to record existing conditions, prototypes, and completed projects. Assist engineers and designers as needed to resolve design compliance issues relating to electrical system's requirements. Research availability of As-Built Drawings in Electronic Data Management System Strong problem-solving skills and written / verbal communications skills. Required: Familiar with California Electrical code and California Energy Code (i.e., Title 24). Ability to develop concepts into drawings ready for construction. Minimum of five years of work experience in related engineering discipline with related field experience. Minimum of five years of AutoCAD and Revit experience with electrical drawing creation and modification. Education: Bachelor's Degree or equivalent experience. Preferred: BS Engineering from an ABET or ACCSC accredited university. Familiar with IEEE 3000 Standards for Industrial and Commercial Power Systems

Kosmos Group is an engineering consulting firm, specializing in electrical power generation, transmission, substation, and distribution. We support public and private utilities, consultants, and contractors across the U.S. and Canada, providing end-to-end engineering solutions, including conceptual design, feasibility study, detailed design, construction drawing package, field inspection, project closeout documentation, and more At Kosmos Group, we foster an open, collaborative, and supportive culture. We believe our employees reach their full potential when they feel valued and empowered through innovation, teamwork, and growth. We deliver reliable solutions for the future and are a positive influence in our communities Our Transmission Engineering team is looking for a Transmission Line Engineer to support our growing Transmission & Distribution practice in our Diamond Bar office. This is a hybrid position, working 3 days in the office and 2 days from home office. The successful candidate will be involved in all facets of transmission line routing and design. Specific areas of responsibility are provided below. Job Description Routing and design a variety of transmission line projects with project scopes varying from new to rebuilt facilities utilizing Power Line Systems software Responsible for technical content and deliverables while working with multi-discipline teams under the guidance of the assigned Project Engineer or Manager Sag tension calculation for transmission tower loading Structure design and analysis and preparing loading trees Assist in the development of design criteria and specifications for transmission line design and procurement of materials Perform peer quality checks Should be familiar with Transmission industry codes and standards Assist Engineer of Record in preparing construction documents including plan and profile drawings, structure loading trees, and foundation and assembly drawings Assist Engineer of Record with complex projects and be the lead engineer for smaller projects Provide construction support for high voltage transmission line projects Participate and progress the company culture of knowledge sharing and continuous improvement Act as a liaison between Kosmos Group engineering and construction teams by conducting field site visits Apply engineering principals and technical experience address project issues and recommend solutions Additional duties as assigned Required Qualifications Bachelor's degree in engineering from an ABET-accredited college An Engineering-in-Training (EIT) certificate Minimum 2 years of transmission line design experience Experience in Power Line System-based programs (i.e., PLS Suite of software including PLS-CADD, PLS-POLE, etc.) Strong attention to detail, team collaboration, organization, and problem-solving skills Ability to work methodically and analytically in a quantitative problem-solving environment Excellent written and verbal communication skills Ability to travel domestically and internationally as needed for project support Preferred Qualifications Prior engineering consulting experience For California only: this position's base salary range approximation is $100,000.00 - $148,000.00 and it depends on numerous factors such as applicable experience, skills, knowledge, credentials, geographical location, etc. We're seeking passionate individuals who bring fresh perspectives and innovative ideas. This is an exciting time to join our team as we gear up to grow and tackle future challenges. We prioritize safety, foster collaboration, act with integrity, respect all perspectives, and embrace forward-thinking. Are you ready to be a part of the journey? Kosmos Group is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

- V&V Engineer/System Verification Engineer rate- $55/hr Job descriptions: V&V Engineer (Verification & Validation Engineer), Matlab/Simulink Bachelor's Engineering degree in computer science, or related field 9 plus years of experience in system/software testing in Aerospace domain Experience in embedded System/software testing is mandatory Experience in scripting or coding implementing test cases into automation test scripts is mandatory Experience in Flight Controls systems or relevant aerospace systems Experience in Avionics standards like DO-178b or ARP-4754A guidelines Execution of test scripts on test environment and debugging Defect tracking and PR process Experience in data transfer protocols such as A429, CAN, etc Experience in Tools such as DOORS, SVN or MKS Soft Skills Excellent communication and leadership abilities. Ability to manage multiple priorities and deliver within deadlines.

Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at ***************** and embark on a rewarding career journey with Austin. Summary/Objective The Austin Company performs design-build work for industrial and specialized commercial markets. The Electrical Intern actively works with in-house engineers, architects, and construction departments to assist with ongoing functions. Additionally, each intern participates in an interactive intern-specific project requiring coordination amongst the various engineering and architectural design disciplines. Throughout the summer, the interns choose a project, decide a site location, and bring their project idea to life with engineering design and collaboration efforts. Finally, a proposal and presentation are assembled, in which the interns pitch their design proposal to the architectural, engineering, construction and marketing professionals in the office. By the end of the summer internship, students gain an understanding for the project cycle. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions Utilization of Revit, Revizto, Visual Lighting, Bluebeam and Procore to aid in project support. Assists in electrical equipment and device selection and layout, life safety equipment selection and layout, and develops equipment schedules. Performs calculations for specific tasks defined by a discipline mentor. Provides Revit design drawings of sketches prepared by other team members. Participates in departmental and design review meetings. With the assistance of discipline mentor, reads and understands drawings and specifications. For the Intern Project, The Electrical Intern duties are: Coordinates with other construction, architectural and engineering disciplines. Selects appropriate power distribution equipment for the project. Selects appropriate lighting for the project. Provides load, voltage drop, conduit fill and photometric calculations; design and layout for power distribution equipment and lighting. Creates Revit drawings, including one-line diagram, area plans, equipment details. Circuits equipment in Revit to create panel schedules. Conducts quantity take-offs and compiles an estimate of all related electrical components in the project. Aids with the project proposal and presents final design to architectural, engineering, construction and marketing professionals in the office. Required Education and Experience Actively enrolled in a 4 or 5-year degree program in Engineering. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The pay for this position in California is $25.00 per hour. The Austin Company is an EEO and DFWP Employer Austin is wholly owned subsidiary of Kajima.

Gray Construction is looking to add a Japanese Speaking Project Engineer - Food and Beverage to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Visa Sponsorship: This role is not eligible for visa sponsorship. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Local General Engineering Contractor seeks a Project Engineer for paving, grading, and underground projects. Ideal candidate should possess a minimum of 2 years of related project management and/or estimating skills. RESPONSIBILITIES: The Project Engineer is responsible for ensuring construction work complies with safety, specifications, cost guidelines, reporting requirements and field engineering activities for assigned projects. Major focus will vary depending on project needs and priorities. Maintains positive relationships with owners, community members and project team members. DUTIES: Able to perform all essential Project Engineer responsibilities. Attend and document project meetings. Set up and maintain electronic filing system as needed. Update and maintain all drawings, specifications and logs. Maintain a site-specific safety plan and pre-task planning process, including audits, meeting, training, etc. Review, analyze, and transmit submittals. Prepare and maintain submittal logs and procurement log. Perform expediting functions. Cost code and/or verify correct codes on time sheets. Code Accounts Payable workflows as assigned. Verify original estimate quantities for labor cost reports. Report quantities in place and maintain labor cost report. Prepare and document extra work orders. Review and assemble change order submittals and quantity surveys. Maintain record set drawings. Document punch list work. Complete other responsibilities as assigned. MINIMUM SKILLS: Bachelor's Degree in Construction Management or related field of study 2 years' work and field experience preferred. Construction related internship experience preferred. Basic understanding of construction cost accounting, estimating, and scheduling skills. Experience with HCSS, HeavyBid, Procore ideal, not required. Ability to read and understand plans and specifications. Effective organizational skills, strong work ethic, and eager to learn. Valid driver's license and reliable transportation.

Job Title: Manufacturing Test Engineer (Electrical) Engagement Type: 1-Year Contract (with possible extension) Pay Rate: $26-$32.00/hour Schedule: Monday-Friday | 100% Onsite | 6:00 AM-2:00 PM (PST) Position Overview We are seeking a Test Equipment Technician to support manufacturing and test engineering operations at our Costa Mesa facility. This is an immediate need role focused on the maintenance, troubleshooting, and repair of test fixtures and equipment in accordance with Schneider Electric test engineering and quality standards. The ideal candidate will have a strong electrical engineering background, hands-on test experience, and exposure to high-voltage systems. Key Responsibilities Perform detailed maintenance, troubleshooting, and repair of test fixtures and test equipment Ensure all test equipment is properly maintained, calibrated, and operational Collaborate closely with Test Engineers to diagnose issues and resolve equipment failures Execute preventive and corrective maintenance tasks to maximize equipment availability, efficiency, and effectiveness Support workflow scheduling and complete required administrative documentation Ensure assigned tasks are completed accurately and within established timelines Adhere to all quality, safety, and engineering procedures Perform other related duties as assigned Required Qualifications Associate degree (AA/AS) in Electrical Engineering or Electrical Technology and 4+ years of related experience OR Certificate from a recognized technical trade school (or advanced military technical training) plus 4+ years of related experience OR High School Diploma or GED (required) with equivalent hands-on technical experience Strong hands-on experience with test equipment and electrical systems Ability to use electronic test and measurement equipment, including DVMs and oscilloscopes, and accurately interpret results Proficiency with basic hand tools and soldering techniques Strong written and verbal communication skills in English Basic computer proficiency, including Microsoft Word and Excel Good color vision for identifying color-coded wiring and cabling Preferred Qualifications Experience working with high-voltage systems (up to 480V) Manufacturing or test environment experience Electrical Engineering (EE) background Top Skills Test Equipment Maintenance & Troubleshooting Electrical Engineering Fundamentals High-Voltage Testing (480V preferred) Test Fixtures & Manufacturing Test Systems

Job Description HIRING NOW-EXPERIENCED FIELD STACK TESTERS FOR ALL LOCATIONS ACROSS THE U.S. Anchorage, Alaska/ Atlanta, Georgia/ Bakersfield, California/ Baton Rouge, Louisiana/ Birmingham, Alabama/ Boston, Massachusetts/ Cedar Rapids, Iowa Charlotte, North Carolina / Cypress, California/ Dallas ,Texas/ Decatur, Alabama/ Denver, Colorado/ Evansville, Indiana/ Houston, Texas/ Jacksonville, Florida Kansas City, Kansas/ Little Rock, Arkansas/ Minneapolis, Minnesota/ Vancouver, Washington/ Philadelphia, Pennsylvania/ Phoenix, Arizona Pittsburgh, Pennsylvania/ Roanoke, Virginia/ Salt Lake City, Utah/ St. Louis, Missouri/ Syracuse, New York and Tampa Florida. Duties & Responsibilities: Support Stack Emissions Testing Operations Conduct onsite stack emissions testing, using proven competencies with wet chemistry and instrumental sampling methodologies Assist to Train and mentor Project Scientists (Field Technicians) on field procedures, test methods, calibrations, etc. using Alliance standardized training materials Motivate the team, and ensure productivity Supervise and reviews equipment calibrations for pivots, control modules and nozzles Assists with pricing and deliverables (proposal/test plans/reports) review Serves as the company's representative to interface with customers and regulatory (EPA) personnel Uphold the highest standards of data quality & ethics Requirements: Must have experience leading stack emissions testing projects in the field. Preferred experience with, client interface, safety leadership, data collection, quality initiatives and timely deliverables to the clients Specific knowledge of instrumental and wet chemistry equipment operation, troubleshooting and calibration required Flexibility to work 40+ hours per week as well as some overnight stays & travel will be required. Consistent standing or walking, bending, crouching, or stooping, climbing ladders and/or stairs, frequent lifting of objects weighing up to 50 pounds. Must be able to distinguish between shades of color Excellent communication skills (internally and with Clients and Regulators) with professional demeanor. Must maintain positive attitude with ability to work well in groups and desire to achieve goals and grow into higher positions of leadership. Valid driver's license Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired after July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this role can average between $60,000-$100,000 annually. The total compensation can include base salary, and bonus plans. The individual for this role must have hands-on experience as a field stack tester preferably with QSTI certifications in methods 1-4. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary Internship Term: Summer 2026 This is a bucket application, and is not an official opening. Your application can be considered for Rivian's 2026 internship programs. If you are selected, you will receive an invitation to interview for an open posting. Rivian internships are experiences optimized for student candidates. To be eligible, you must be an undergraduate or graduate student in an accredited program during the internship term with an expected graduation date between December 2026 through May 2028. Rivian's Internship Program requires active student enrollment. Information regarding your expected degree completion date is collected solely to verify eligibility and determine your availability for future full-time opportunities. Rivian is an equal opportunity employer and does not use graduation dates to determine the age of applicants or as a basis for discriminatory hiring decisions. If you are not pursuing a degree, please see our full time positions on our Rivian careers site. Note that if your university has specific requirements for internship programs, it is your responsibility to fulfill those requirements. Responsibilities Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Electrical Hardware Development Electrical Hardware Design Electrical Architecture Integration & Test Design Verification Power Electronics Propulsion Energy & Charging Qualifications Must be currently pursuing a bachelors, masters, or PhD degree Actively pursuing a degree or one closely related in Electrical Engineering Proficiency in Electrical Engineering fundamentals Experience with languages such as C, C++, Python Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Pay Disclosure Salary Range/Hourly Rate for Internships: The range of pay for internships is $25.00-$51.00 per hour. Actual compensation will be determined based on location, and other factors permitted by law. Rivian provides robust wellness benefits, and a medical insurance package for interns, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Must be currently pursuing a bachelors, masters, or PhD degree Actively pursuing a degree or one closely related in Electrical Engineering Proficiency in Electrical Engineering fundamentals Experience with languages such as C, C++, Python Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Electrical Hardware Development Electrical Hardware Design Electrical Architecture Integration & Test Design Verification Power Electronics Propulsion Energy & Charging

Job Description Are you a seasoned Electrical Engineer with over 5 years of experience seeking the next step in your career? Our clientan award-winning, industry-leading engineering firm consistently recognized as a "Best Place to Work" for over 15 yearsis looking for a Senior Electrical Engineer to join their dynamic team in Long Beach, CA. Duties & Responsibilities Pre-Design & Site Analysis Conduct field surveys and assessments for electrical system design Compile detailed site assessment reports and gather technical data Develop electrical schematic designs during early project phases Design & Technical Execution Create single-line diagrams, riser diagrams, and circuit layouts Perform electrical calculations including arc flash, coordination, short circuit, voltage drop, and load flow using ETAP or SKM Select lighting fixtures and power equipment Design lighting and power circuiting and coordinate lighting control systems Develop fire alarm layouts in accordance with NFPA 72 and International Fire Code Design fire alarm risers, sequence of operations, and system calculations Produce detailed construction documents including enlarged plans, elevations, schedules, and diagrams Apply CAD/BIM standards and ensure compliance with California Electrical Code and Title 24 Energy Standards Coordinate effectively with mechanical, plumbing, telecom, civil, structural, and architectural teams Project Management & Leadership Manage multiple large-scale projects, coordinating with internal teams and external consultants Provide technical mentorship to junior and mid-level design engineers Lead project proposals and contribute to client development Maintain strong client relationships and actively pursue new business opportunities Construction Administration Review and respond to RFIs and submittals during construction phase Conduct field inspections, punch walks, and prepare final punch list documentation Ensure project execution aligns with design intent and code requirements Qualifications & Requirements Education & Licenses Bachelors or Masters degree in Electrical Engineering Registered Professional Engineer (PE) Required Experience 10+ years of professional electrical engineering experience (commercial, healthcare, institutional projects preferred) Proven experience leading design and managing engineering teams Skills & Technical Knowledge Proficient in AutoCAD, ETAP or SKM, and Revit Familiarity with HCAI standards is a plus Strong organizational skills, attention to detail, and ability to manage multiple deadlines Self-driven and collaborative mindset with strong technical communication skills Benefits 13 paid company holidays per year Comprehensive medical, dental, and vision insurance Employer-paid group life insurance Supplemental insurance options (Accident, Critical Illness, Pet Insurance) Tuition and professional training assistance 401(k) plan with 100% employer match up to 4% of compensation (immediate vesting) Employment Type: Full time Location: Long Beach, CA

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Autonomous Systems Electrical Engineer Location: Irvine, California Position Description: The Autonomous Systems Electrical Engineer in this position will perform assigned electrical engineering tasks including circuit and subsystem design, system integration, troubleshooting, wire harness design, electromechanical/electrical system testing, and data analysis. This position reports to the Electrical Engineering Manager, while working directly with Vehicle Technical Leads and Program Managers. Responsibilities: Work with the team to design and build subsystem/hardware/software for our aircraft systems Prepare and create schematics, engineering drawings, test plans/procedures Collaborate with mechanical, GNC, manufacturing, aerodynamic, procurement, quality assurance, and project/program management teams Demonstrate and encourage adherence to best practices and standard procedures Required Skills/ Qualifications: Proven understanding of Electrical Engineering principles Demonstrated skills in troubleshooting, validating/testing, and analyzing subsystems/systems Experience in documenting designs and analyses with written reports Ability to design using CAD software such as Altium Proven communication and interpersonal skills Preferred Skills/Qualifications: Experience in designing robotic and/or aircraft systems UAV experience highly desired Hands-on experience with microcontrollers and firmware/software Experience in small to medium sized teams in an R&D environment Familiar with MIL spec hardware and harnessing standards Education/Experience: Bachelor's degree in electrical engineering with 3-5+ years progressive experience Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment or warehouse. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have the ability to stand, climb, occasionally lift a minimum of 25 lbs. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine Involves movement between departments, floors, and worksites to facilitate work. May be performing physical activities including, but not limited to, heavy lifting and moving of items, climbing in and out of equipment, crawling, and working outdoors. Other Requirements: It is an essential requirement for the person in this role to have a legal right to work in the United States and be eligible to obtain any required Export Authorization and DoD Clearance. Salary: $90,000 - $120,000 annually Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or $annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment. #LI-ONSITE

Electrical Systems Engineer Waev Inc. is an electric mobility OEM founded in 2021 to manufacture, distribute, market, and support the GEM, Taylor-Dunn and Tiger brands. GEM was the first commercially-produced, street-legal low-speed vehicle in the United States. GEMs shuttle people and goods across city centers, residential communities, government campuses, colleges and universities, and other micro-environments. Founded in 1949, Taylor-Dunn burden carriers, personnel carriers, and stockchasers have been trusted solutions in a broad range of commercial environments and provide premium reliability, safety features, and all-electric efficiency for industrial grade applications. Tiger heavy-duty tow tractors have been towing cargo, baggage, parcel, and other equipment in ground support applications since 1981. Waev's headquarters and factory are located in Anaheim, California. The Electrical Systems Engineer will be responsible for leading the LSV / industrial electric vehicle research, design and integration. This individual will support all aspects of engineering, specifically hardware such as sensors, motors, wire harnesses, and electrical control units. The Electrical Systems Engineer will work in an exciting, fast-paced team environment. Job Details Role and Responsibilities Lead the research, development and prototyping of new electrical architectures for LSV (Low Speed Vehicle) and industrial electric vehicles Lead the electrical hardware engineering activities and partner with mechanical engineering counterparts to integrate into next generation of LSV and Industrial electric vehicles Lead the electrical engineering release meetings and processes with mechanical engineering and the technical prototyping team and ensure built success Develop, manage and maintain electrical BOM, drawings, and electrical engineering specification Develop and manage all documentations of the requirements, designs and validation report Support all electrical engineering validation work to include testing of all system used in electrical vehicles Release high quality automotive drawings, components and systems Find best parts and best suppliers and develop competitive BOM costs Provide analysis and troubleshooting of the vehicles throughout the development process Provide technical guidance to the engineering teams, technicians and manufacturing workers Follow all company processes Qualifications and Educational Requirements Bachelor's Degree in Engineering or higher 4-6+ years hands-on Electrical Hardware System development experience 4-6+ leading D, V, and PI development processes Proven track record of automotive systems development and validation Hands-on experience in development of automotive electrical components Strong problem-solving, organizational, and analytical skills Excellent organizational, communication and leadership skills Preferred Skills Electric Vehicle development or relevant experiences Expertise on leading automotive validation processes and documentation Strong people skills, able to work in a fast-paced team environment Ability to work with domestic and international technology partners Microsoft software including Excel, Project, Word, Outlook and PowerPoint Working Conditions Role is full-time and in-person based within Waev's Anaheim manufacturing facility Fast paced office environment Design, prototyping, and test in facility Travel as needed (Up to 20%) EEO Statement Waev Inc is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.

Work Schedule: Fully Onsite Assignment Length: 6 + month contract to (hire + multi-extension capability) Rate: 35.00 /hr. W2 + full Benefits We are seeking a motivated Field Test Engineer to support internal field testing efforts for mobile and wireless technologies. This role is heavily field-based and involves executing comprehensive test plans, analyzing KPIs, logging issues, and working closely with cross-functional teams. The ideal candidate is technically strong, comfortable working in the field most days of the week, and eager to grow in wireless testing and analysis. Education & Experience Bachelor's degree in Engineering or a related field 1-2 years of relevant experience required Primary Responsibilities Execute internal Field Test Plans, including: Data mobility testing Call processing validation Data throughput (Tput) testing Perform testing using Qualcomm and device-level diagnostic tools Conduct primary log analysis for upper-layer procedures, including: Registration procedures RLF KPI analysis Data throughput KPI analysis Report defects and issues using internal QC systems Collaborate with R&D and cross-functional teams to drive root cause analysis and issue resolution Spend approximately 4-5 days per week in the field executing test cases, including drive testing Required Technical (Hard) Skills Hands-on experience with Qualcomm tools: QXDM QPST XCAL KPI analysis using tools such as: XCAP QCAT Basic understanding of: SIP call flow Wireshark packet analysis Ability to test in driving conditions Willingness and ability to travel at short notice Bonus skills (preferred but not required): Scripting experience using Python and/or Perl Soft Skills & Competencies Strong teamwork and collaboration skills Effective verbal and written communication skills Ability to work with cross-functional teams and external partners when required Comfortable working independently in field environments Hands-on mindset with a willingness to learn new tools and testing methodologies Work Environment Fully onsite role-based in Irvine, CA The majority of time spent in the field executing test plans Fast-paced, collaborative, and technically challenging environment #IND #LI-DC2

About Odys Our mission at Odys is simple - we build safe, sustainable aircraft to cut travel time in half on the world's busiest corridors. Our flagship aircraft Alta enables travelers to skip the big-airport hassle by using city helipads and local airports to connect cities less than 1,000 miles apart (approx 40% of flights). And on average cut CO2 by 76% on tens of billions of flight miles globally. To get there, we start with our UAV called Laila for commercial logistics, medical transport, humanitarian aid, disaster relief, and defense missions. We're deploying aircraft with launch partners (Fiji Airways, Honeywell, Aramex, US Navy) beginning in late 2025 and already have firm orders for aircraft under contract. We're a team of expert engineers from deep tech and aerospace that focus on fast iterations loops (completed transition flight faster than our peers) combined with mastery of the aircraft certification process. Previously, our team developed custom drones, brought multiple automotive platforms into production, and electrified transportation vehicles that magnetically levitate, that roll, that fly. Together, we've been learning, developing, building, testing, and preparing for this challenge our entire lives. About The Role Odys Aviation is pioneering next-generation hybrid-electric aircraft to make sustainable high-speed regional travel a reality. As a Senior Power Electronics Engineer, you will be at the core of our powertrain development, designing and optimizing high-voltage inverters, converters, and motor controllers for our UAV (Laila) and eVTOL (Alta) programs. This role is critical to advancing our high-power, high-frequency switching power electronics stage platforms, tightly coupled embedded controls and fault-resilient propulsion architectures. You will be a hands-on engineer, independently driving hardware design from concept to prototype and validation, ensuring compliance with aerospace standards (ARP4754B, DO-178C, DO-254). Working closely with propulsion, embedded systems, and flight controls teams, you will lay the technical foundation for Odys' powertrain systems and help scale the team as the company grows. Responsibilities Design & Develop high-voltage(400-800VDC) inverters, converters, motor controllers, power filters, and gate drivers for aircraft propulsion. End-to-end hardware development, including characterization of high-power switching devices, designing double-pulse test setups, optimizing DC bulk capacitor selection, and developing thermal management and fault protection strategies. Perform high-fidelity simulations using MATLAB/Simulink, PLECS, and SPICE to validate and optimize hardware designs. Integrate hardware with embedded controllers, ensuring robust gate driver design, PMSM motor control, and real-time system monitoring. Ensure compliance with aerospace certification standards (ARP4754B, DO-178C, DO-254) and document design decisions for regulatory approval. Collaborate with multidisciplinary teams to test, troubleshoot, and refine designs through iterative prototyping. Lead hands-on validation efforts, including lab testing, debugging, and system integration with propulsion and flight hardware. Requirements Master's degree or PhD in Electrical Engineering, Power Electronics, or a related field. 5+ years of hands-on experience designing and testing high-voltage power electronics. Deep expertise in SiC MOSFET-based inverter/converter design, gate driver circuitry, and HV system protection. Strong understanding of PMSM motor control, embedded systems, and fault detection & mitigation. Proficiency in MATLAB/Simulink, PLECS, and SPICE for powertrain analysis. Ability to work independently, meet critical milestones, and drive projects from concept to hardware validation. Preferred Qualifications Experience in aerospace or eVTOL powertrain development and familiarity with aircraft certification processes. Expertise in DO-178C (software) and DO-254 (hardware) compliance in regulated environments. Strong background in HV system protection strategies, fault handling, and EMI mitigation. Experience developing advanced control algorithms for PMSMs and high-performance electric motors. Track record of delivering production-ready power electronics in cross-functional engineering teams. Strong analytical, problem-solving, and communication skills to drive data-driven decisions

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Overview:Marathon Petroleum Corp. (MPC) offers internship and co-op opportunities to high-performing college students who want meaningful hands-on experiences in their fields of study. The following core values guide MPC's approach to doing business: safety and environmental stewardship; integrity; inclusion; collaboration; and excellence. Interns/co-ops work side-by-side with experienced professionals as contributing members of diverse work teams who create value for the company's shareholders. MPC believes that how we conduct our business is just as important as the bottom line. About the Logistics & Storage (L&S) Organization:The Logistics & Storage organization is the link between the Refining and Marketing components of Marathon. L&S transports crude oil and refined products to and from the refineries and onto storage terminals for distribution to retail marketing facilities, via pipelines and marine transportation operations. Logistics & Storage is comprised of four primary components: Logistics & Storage Engineering (L&SE) - L&SE provides engineering design and project management services to Terminals, MPL, and Marine. Terminals - Terminals play a prominent role in enhancing life's possibilities by blending, distributing, and delivering quality products in a safe, reliable, and competitive manner. Marathon Pipe Line Company (MPL) - MPL operates pipeline systems that move crude oil from production fields, other pipeline companies, and offshore platforms to MPC refineries, other refineries, and other pipeline systems. MPL also operates pipeline systems that move refined products from refineries to product terminals. Marine - Maintains and operates a large private inland petroleum products barge fleet, which is used to ship crude oil, intermediates, and refined products. Responsibilities:The purpose of the Logistics and Storage intern/co-op program is to identify and develop future technical and leadership talent for the benefit of MPC, the engineering intern/co-op, and the engineering profession. The intern/co-op program may consist of any number of work sessions. Multiple sessions give interns/co-ops the ability to rotate between the different L&S components in order to gain exposure to the various business segments and to offer a variety of assignments with increasing responsibility. Intern/Co-ops will gain experience in the 5 phases of the Marathon Project Management Process (MPMP) including Conceptual, Feasibility, Definition, Implementation, and Start-up/Close-out. Other responsibilities may include: + Development of project scope + Engineering oversight + Technical design + Cost estimating + Schedule development + Evaluating and summarizing bid sets + Construction supervision + Safety leadership + Coordination with operations groups + Project documentation + Travel ranges from 15-45% Qualifications: + Candidates must be pursuing a Bachelor's degree in Civil, Electrical, or Mechanical Engineering. + Concurrent enrollment in a Bachelor's degree seeking program for the duration of the experience. + Strong academic performance. + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Availability to work 40 hours per week. + Positions are available Spring, Summer, and Fall semesters. + Availability for multiple work terms is preferred. + Many projects will require travel to construction sites; therefore, a valid driver's license is required. + Military experience a plus. + MIN - $32.92 per hour / MAX - $41.67 As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018403 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Catlettsburg, Kentucky, East Sparta, Ohio, La Palma, California, Owensboro, Kentucky, Pasadena, Texas, Salt Lake City, Utah, Tampa, Florida, Vernon, Illinois, Wood River, Illinois Education: Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. We are building artificial gravity space stations, allowing long-term stays in space without the adverse effects of zero-gravity. Our initial crewed space habitat will be Haven-1, scheduled to be the world's first commercial space station when it launches into low-Earth orbit in 2026. It is part of our stepping stone approach to continuous human presence in LEO. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Vast offers an advanced engineering internship program with hands-on opportunities to design and build space hardware and software. You will play a crucial role in the development of the systems that will be required for the operation of artificial-gravity human-rated space stations. We have four engineering internship postings for different areas of focus (Mechanical / Aerospace, Manufacturing, Electrical, Software). Please only apply to the most relevant posting for your background. Our interns are mentored by industry experts to solve challenging real-world engineering problems across various teams. This is a 12 week internship at our HQ based in Long Beach, CA. Responsibilities will vary depending on each intern's area of expertise. We are currently looking for candidates with experience in the the following engineering disciplines: Avionics, E-2 Avionics System Test Minimum Qualifications: Qualified candidates must be enrolled in a Bachelor's or Master's degree program from an accredited college or university in electrical engineering, computer engineering, or other related engineering disciplines Ability to work full-time onsite in Long Beach, CA Preferred Qualifications: Application of technical skills outside of the classroom (examples include: extracurricular projects, volunteering, personal projects, laboratory research, or prior internship/work experience) Proficiency in Circuit Design Software (e.g., Altium, LT Spice, etc) Strong analytical and problem-solving skills with attention to detail Excellent communication skills and the ability to work collaboratively in a professional team environment Eagerness to learn and adapt in a dynamic startup environment Engineering problem solving capabilities Self-directed with a positive attitude and team spirit Pay Range: California$35-$40 USDCOMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: 100% medical, dental, and vision coverage for employees and dependents, flexible paid time off for exempt staff and up to 10 days of vacation for non-exempt staff, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, One Medical membership, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks. We also take pride in offering exceptional food perks, with snacks, drip coffee, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast's ongoing commitment to providing high-quality meals for employees. U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.