Electrical engineer jobs in San Bernardino, CA - 770 jobs

Senior RF Engineer Orange County, CA Our exciting Space client are looking for an RF engineer to be responsible for the RF design for a remote sensing payload, this roles responsibility includes the concept of operations (CONOPS) for the payload on the bus given on orbit constraints such as power, attitude, thermal loads. Being responsible for all aspects include the ground processing. With support as needed from the SAR/DevOps team, they will be responsible for designing and developing the ground-based solution that would work with various ground systems. Success in this role requires someone with very detailed experience with both SAR theory as well as hands on design experience for both the hardware and software. They will need to be a self-starter with strong initiative to assist in planning out the direction, executing on the plan, then adjusting the plan when unknowns become knowns. Key Responsibilities: Analyze and optimize RF design for Synthetic Aperture Radar (SAR) payloads while collaborating with cross-functional teams to meet project specifications Lead the design of complex systems involving high-speed digitizers, low-noise RF circuits, FPGAs, and embedded processors Work closely with SAR Engineers to test and validate SAR payloads and data collections Conduct detailed RF analysis for antennas and antenna arrays Create RF subsystem requirements and derive engineering requirements to meet project goals Perform microwave analysis using Python or similar tools Generate documentation and effectively communicate technical information to audiences of varying technical ability Contribute technical writing to RFIs, RFPs, and other business capture activities Ideal Qualifications: Advanced degree in Electrical Engineering, Computer Engineering, or similar field 8+ years of experience in a similar engineering role (RF Engineering, Electrical Engineering) 4+ years of experience in a spacecraft engineering discipline 4+ years of experience in high-speed electronics and RF design Experience in anechoic testing with phased antenna arrays Expertise in RF test automation and data analysis Expertise in electromagnetics, RF, and antenna theory Familiarity with SAR imaging concepts and system design Mastery of signal processing fundamentals, including the manipulation of complex-valued data Preferred Qualifications: 4+ years of hands-on experience in SAR payload design and integration Experience with assembly, integration, and testing for spacecraft/payloads Experience with embedded programming (C/C++) and FPGA design tools (Verilog/VHDL) Background in software configuration management (SCM) and CI/CD pipelines Experience in Python or scripting languages for test automation Experience with formal verification and validation of space-rated systems Due to Import control requirements candidates will need to be Must be a US person with a current TS/SCI clearance or ability to pursue one.

We are looking to bring on a senior-level Electrical Engineer to join a technical consulting team that works across a wide range of building types and industries. This role is ideal for someone who is confident in the field, strong in electrical fundamentals, and comfortable delivering clear, defensible engineering opinions to clients and legal teams. The work focuses on investigating electrical system failures and damage, determining cause and responsibility, and supporting complex matters that may involve insurance claims, disputes, or litigation. Assignments span commercial, industrial, infrastructure, municipal, and residential facilities. Responsibilities Perform on-site investigations of electrical systems and equipment to document existing conditions and damage following loss events such as fires, floods, storms, and equipment failures Analyze electrical components and systems to determine cause, origin, and contributing factors related to design, installation, construction practices, or product performance Apply applicable electrical and building codes to develop repair scope recommendations and support technical conclusions Review construction documents, drawings, specifications, and records to evaluate compliance with design intent and industry standards Provide electrical support to fire origin and cause investigations when electrical involvement is suspected Prepare clear, well-organized technical reports explaining findings, opinions, and recommendations Communicate regularly with clients, contractors, attorneys, and code officials to address technical issues and project needs Manage multiple active assignments while meeting schedules, budgets, and quality expectations Support the development and maintenance of client relationships Travel as required, sometimes on short notice Qualifications Bachelor of Science degree in Electrical Engineering from an ABET-accredited program Licensed Professional Engineer in California, with additional state licenses or the ability to obtain them preferred Minimum of seven years of electrical engineering experience, including design, field investigation, forensic work, or related technical roles Strong working knowledge of electrical and building codes including NEC, NFPA, and ICC standards Solid understanding of electrical systems, equipment, and construction practices across multiple facility types Hands-on field experience evaluating electrical systems and equipment in real-world conditions Experience estimating electrical repair or replacement scope is a plus Strong written and verbal communication skills, with the ability to explain technical issues to non-technical audiences Experience supporting litigation, including depositions, mediation, arbitration, or trial, is desirable Existing client relationships or business development experience is a strong advantage

HCLTech is looking for a highly talented and self-motivated Electrical Design Engineer to join it in advancing the technological world through innovation and creativity. Job Title: Electrical Design Engineer Position Type: Fulltime Location: Irvine, CA Key Responsibilities: Core Expertise End-to-end New Product Development (NPD) experience including system architecture, design, rapid prototyping, integration, testing, V&V, and design transfer. Strong knowledge of medical capital systems product lifecycle and disposables (e.g., catheters, endoscopes, pumps). Hands-on design experience in analog and digital board design involving microprocessors, microcontrollers, memory, sensors, and amplifiers. Proficiency in interface protocols such as I²C, UART, SPI, USB, and PCI. Expertise in high-density cable design, harnessing, and cabling. Tools & Standards Skilled in ECAD tools (OrCAD, Allegro) for schematic generation and PCB layout, including DFx and Gerber release. Experience in component engineering and BOM creation for prototype, pilot, and production phases. Strong understanding of IEC 60601, FDA submission requirements, and medical regulatory standards. Familiarity with VAVE analysis, vendor qualification, and supplier discussions. Testing & Validation Proficient in using test equipment such as oscilloscopes, multimeters, flow meters, and signal analyzers for troubleshooting and validation. Ability to draft test protocols, generate reports, and perform bench testing, system characterization, and verification. Soft Skills Excellent communication skills and ability to collaborate effectively with cross-functional teams. Strong problem-solving mindset and attention to detail. Education & Experience Bachelor's degree in Electrical Engineering or equivalent (Master's preferred). Minimum 5+ years of relevant experience in electrical design and development. Pay and Benefits Pay Range Minimum: $85000 per year Pay Range Maximum: $130000 per year HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year. How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Visium Resources has been asked to identify qualified candidates for this Electrical Designer/Drafter position. This position is a contract opportunity which is expected to be on-site in Anaheim, CA for a duration of 18 Months+. Architecture & Facilities Engineering (A&FE) is looking for an Electrical Designer/Drafts person to support the development and sustainment of the electrical distribution systems throughout the work environment. Our department supports the facility, attractions, entertainment, foods, and merchandise maintenance teams. You will support maintenance teams, minor system modifications and immediate response efforts. The objective of this position is to update facility drawings through drawing research and field verification. These drawings include electrical one-line diagrams, equipment layout and elevation drawings, motor control drawings, system control drawings etc. This role also involves close collaboration with other engineering disciplines and multiple project teams. Responsibilities Perform site visits for the retrieval of field data and the verification of existing drawings including details, measurements, existing conditions, product data. Coordinate and execute the update and correction of electrical one-line drawings, equipment layout and elevation drawings, motor control drawings, system control drawings and other electrical drawings as needed. Perform work that maintains design standards. Help coordinate photo documentation required to record existing conditions, prototypes, and completed projects. Assist engineers and designers as needed to resolve design compliance issues relating to electrical system's requirements. Research availability of As-Built Drawings in Electronic Data Management System Strong problem-solving skills and written / verbal communications skills. Required: Familiar with California Electrical code and California Energy Code (i.e., Title 24). Ability to develop concepts into drawings ready for construction. Minimum of five years of work experience in related engineering discipline with related field experience. Minimum of five years of AutoCAD and Revit experience with electrical drawing creation and modification. Education: Bachelor's Degree or equivalent experience. Preferred: BS Engineering from an ABET or ACCSC accredited university. Familiar with IEEE 3000 Standards for Industrial and Commercial Power Systems

Kosmos Group is an engineering consulting firm, specializing in electrical power generation, transmission, substation, and distribution. We support public and private utilities, consultants, and contractors across the U.S. and Canada, providing end-to-end engineering solutions, including conceptual design, feasibility study, detailed design, construction drawing package, field inspection, project closeout documentation, and more At Kosmos Group, we foster an open, collaborative, and supportive culture. We believe our employees reach their full potential when they feel valued and empowered through innovation, teamwork, and growth. We deliver reliable solutions for the future and are a positive influence in our communities Our Transmission Engineering team is looking for a Transmission Line Engineer to support our growing Transmission & Distribution practice in our Diamond Bar office. This is a hybrid position, working 3 days in the office and 2 days from home office. The successful candidate will be involved in all facets of transmission line routing and design. Specific areas of responsibility are provided below. Job Description Routing and design a variety of transmission line projects with project scopes varying from new to rebuilt facilities utilizing Power Line Systems software Responsible for technical content and deliverables while working with multi-discipline teams under the guidance of the assigned Project Engineer or Manager Sag tension calculation for transmission tower loading Structure design and analysis and preparing loading trees Assist in the development of design criteria and specifications for transmission line design and procurement of materials Perform peer quality checks Should be familiar with Transmission industry codes and standards Assist Engineer of Record in preparing construction documents including plan and profile drawings, structure loading trees, and foundation and assembly drawings Assist Engineer of Record with complex projects and be the lead engineer for smaller projects Provide construction support for high voltage transmission line projects Participate and progress the company culture of knowledge sharing and continuous improvement Act as a liaison between Kosmos Group engineering and construction teams by conducting field site visits Apply engineering principals and technical experience address project issues and recommend solutions Additional duties as assigned Required Qualifications Bachelor's degree in engineering from an ABET-accredited college An Engineering-in-Training (EIT) certificate Minimum 2 years of transmission line design experience Experience in Power Line System-based programs (i.e., PLS Suite of software including PLS-CADD, PLS-POLE, etc.) Strong attention to detail, team collaboration, organization, and problem-solving skills Ability to work methodically and analytically in a quantitative problem-solving environment Excellent written and verbal communication skills Ability to travel domestically and internationally as needed for project support Preferred Qualifications Prior engineering consulting experience For California only: this position's base salary range approximation is $100,000.00 - $148,000.00 and it depends on numerous factors such as applicable experience, skills, knowledge, credentials, geographical location, etc. We're seeking passionate individuals who bring fresh perspectives and innovative ideas. This is an exciting time to join our team as we gear up to grow and tackle future challenges. We prioritize safety, foster collaboration, act with integrity, respect all perspectives, and embrace forward-thinking. Are you ready to be a part of the journey? Kosmos Group is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at ***************** and embark on a rewarding career journey with Austin. Summary/Objective The Austin Company performs design-build work for industrial and specialized commercial markets. The Electrical Intern actively works with in-house engineers, architects, and construction departments to assist with ongoing functions. Additionally, each intern participates in an interactive intern-specific project requiring coordination amongst the various engineering and architectural design disciplines. Throughout the summer, the interns choose a project, decide a site location, and bring their project idea to life with engineering design and collaboration efforts. Finally, a proposal and presentation are assembled, in which the interns pitch their design proposal to the architectural, engineering, construction and marketing professionals in the office. By the end of the summer internship, students gain an understanding for the project cycle. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions Utilization of Revit, Revizto, Visual Lighting, Bluebeam and Procore to aid in project support. Assists in electrical equipment and device selection and layout, life safety equipment selection and layout, and develops equipment schedules. Performs calculations for specific tasks defined by a discipline mentor. Provides Revit design drawings of sketches prepared by other team members. Participates in departmental and design review meetings. With the assistance of discipline mentor, reads and understands drawings and specifications. For the Intern Project, The Electrical Intern duties are: Coordinates with other construction, architectural and engineering disciplines. Selects appropriate power distribution equipment for the project. Selects appropriate lighting for the project. Provides load, voltage drop, conduit fill and photometric calculations; design and layout for power distribution equipment and lighting. Creates Revit drawings, including one-line diagram, area plans, equipment details. Circuits equipment in Revit to create panel schedules. Conducts quantity take-offs and compiles an estimate of all related electrical components in the project. Aids with the project proposal and presents final design to architectural, engineering, construction and marketing professionals in the office. Required Education and Experience Actively enrolled in a 4 or 5-year degree program in Engineering. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The pay for this position in California is $25.00 per hour. The Austin Company is an EEO and DFWP Employer Austin is wholly owned subsidiary of Kajima.

- V&V Engineer/System Verification Engineer rate- $55/hr Job descriptions: V&V Engineer (Verification & Validation Engineer), Matlab/Simulink Bachelor's Engineering degree in computer science, or related field 9 plus years of experience in system/software testing in Aerospace domain Experience in embedded System/software testing is mandatory Experience in scripting or coding implementing test cases into automation test scripts is mandatory Experience in Flight Controls systems or relevant aerospace systems Experience in Avionics standards like DO-178b or ARP-4754A guidelines Execution of test scripts on test environment and debugging Defect tracking and PR process Experience in data transfer protocols such as A429, CAN, etc Experience in Tools such as DOORS, SVN or MKS Soft Skills Excellent communication and leadership abilities. Ability to manage multiple priorities and deliver within deadlines.

Gray Construction is looking to add a Japanese Speaking Project Engineer - Food and Beverage to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Visa Sponsorship: This role is not eligible for visa sponsorship. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Job Title: Manufacturing Test Engineer (Electrical) Engagement Type: 1-Year Contract (with possible extension) Pay Rate: $26-$32.00/hour Schedule: Monday-Friday | 100% Onsite | 6:00 AM-2:00 PM (PST) Position Overview We are seeking a Test Equipment Technician to support manufacturing and test engineering operations at our Costa Mesa facility. This is an immediate need role focused on the maintenance, troubleshooting, and repair of test fixtures and equipment in accordance with Schneider Electric test engineering and quality standards. The ideal candidate will have a strong electrical engineering background, hands-on test experience, and exposure to high-voltage systems. Key Responsibilities Perform detailed maintenance, troubleshooting, and repair of test fixtures and test equipment Ensure all test equipment is properly maintained, calibrated, and operational Collaborate closely with Test Engineers to diagnose issues and resolve equipment failures Execute preventive and corrective maintenance tasks to maximize equipment availability, efficiency, and effectiveness Support workflow scheduling and complete required administrative documentation Ensure assigned tasks are completed accurately and within established timelines Adhere to all quality, safety, and engineering procedures Perform other related duties as assigned Required Qualifications Associate degree (AA/AS) in Electrical Engineering or Electrical Technology and 4+ years of related experience OR Certificate from a recognized technical trade school (or advanced military technical training) plus 4+ years of related experience OR High School Diploma or GED (required) with equivalent hands-on technical experience Strong hands-on experience with test equipment and electrical systems Ability to use electronic test and measurement equipment, including DVMs and oscilloscopes, and accurately interpret results Proficiency with basic hand tools and soldering techniques Strong written and verbal communication skills in English Basic computer proficiency, including Microsoft Word and Excel Good color vision for identifying color-coded wiring and cabling Preferred Qualifications Experience working with high-voltage systems (up to 480V) Manufacturing or test environment experience Electrical Engineering (EE) background Top Skills Test Equipment Maintenance & Troubleshooting Electrical Engineering Fundamentals High-Voltage Testing (480V preferred) Test Fixtures & Manufacturing Test Systems

Job Description HIRING NOW-EXPERIENCED FIELD STACK TESTERS FOR ALL LOCATIONS ACROSS THE U.S. Anchorage, Alaska/ Atlanta, Georgia/ Bakersfield, California/ Baton Rouge, Louisiana/ Birmingham, Alabama/ Boston, Massachusetts/ Cedar Rapids, Iowa Charlotte, North Carolina / Cypress, California/ Dallas ,Texas/ Decatur, Alabama/ Denver, Colorado/ Evansville, Indiana/ Houston, Texas/ Jacksonville, Florida Kansas City, Kansas/ Little Rock, Arkansas/ Minneapolis, Minnesota/ Vancouver, Washington/ Philadelphia, Pennsylvania/ Phoenix, Arizona Pittsburgh, Pennsylvania/ Roanoke, Virginia/ Salt Lake City, Utah/ St. Louis, Missouri/ Syracuse, New York and Tampa Florida. Duties & Responsibilities: Support Stack Emissions Testing Operations Conduct onsite stack emissions testing, using proven competencies with wet chemistry and instrumental sampling methodologies Assist to Train and mentor Project Scientists (Field Technicians) on field procedures, test methods, calibrations, etc. using Alliance standardized training materials Motivate the team, and ensure productivity Supervise and reviews equipment calibrations for pivots, control modules and nozzles Assists with pricing and deliverables (proposal/test plans/reports) review Serves as the company's representative to interface with customers and regulatory (EPA) personnel Uphold the highest standards of data quality & ethics Requirements: Must have experience leading stack emissions testing projects in the field. Preferred experience with, client interface, safety leadership, data collection, quality initiatives and timely deliverables to the clients Specific knowledge of instrumental and wet chemistry equipment operation, troubleshooting and calibration required Flexibility to work 40+ hours per week as well as some overnight stays & travel will be required. Consistent standing or walking, bending, crouching, or stooping, climbing ladders and/or stairs, frequent lifting of objects weighing up to 50 pounds. Must be able to distinguish between shades of color Excellent communication skills (internally and with Clients and Regulators) with professional demeanor. Must maintain positive attitude with ability to work well in groups and desire to achieve goals and grow into higher positions of leadership. Valid driver's license Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired after July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this role can average between $60,000-$100,000 annually. The total compensation can include base salary, and bonus plans. The individual for this role must have hands-on experience as a field stack tester preferably with QSTI certifications in methods 1-4. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Responsibilities ● Ownership of key electrical sub-systems and functionals within new DC high power charging products ● Delivery of electrical hardware and charging functions by co-ordinating cross functional decision making between hardware and software teams ● Ownership of requirements development and coordination of sign off across multiple teams including vehicle, cloud and mobile ● Contribute to architecture development and electrical system-level design for all charging products ● Analyze and evaluate design impacts associated with alternate designs or new components and vendors. ● Collaborate with validation teams on system/sub-system plans for requirement traceability. This includes taking ownership of the requirements from definition through to comprehensive testing and verification. ● Proactively and independently solve routine problems, contributing meaningfully to team objectives. ● Work closely with the software team to define interfaces, troubleshoot issues, and ensure the successful integration of charging hardware and software systems. ● Analyze test data to identify performance trends and areas for optimization in electrical and power systems. ● Work closely with the design team to suggest and implement modifications that improve product performance, durability, and user satisfaction. ● Create and maintain essential technical documentation, including schematics, manuals, specifications, and test reports. ● As a highly skilled specialist, you will contribute to the development of concepts and techniques and complete complex tasks in creative and effective ways. Qualifications Required Qualifications: ● Bachelor's degree in Electrical Engineering, Software Engineering, or equivalent. ● Typically requires a minimum of 3+ years of system engineering related experience. ● Proficiency in requirements management tools and agile project management tools (Jira and Confluence preferred). ● Proficiency in applying DFMEA's, functional safety analysis and/or other systems engineering tools ● Proficiency is using common languages for data analysis and leveraging Ai tools as part of daily workflow Preferred Qualifications: ● Experience developing EV charging products or significant understanding of the EV charging space ● Compliance experience with UL/IEEE/SAE standards is a plus. ● Demonstrated experience in systems engineering within electric vehicle charging, power conversion equipment, and/or renewable energy (PV, energy storage). ● Experience working with high-voltage systems ● Confident in use of data analysis platforms such as Databricks ● Experience working with different communication protocols and integrating complex systems Pay Disclosure Salary Range SoCal-Based Applicants: $96,700-$120,900 (actual compensation will be determined based on experience, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Required Qualifications: ● Bachelor's degree in Electrical Engineering, Software Engineering, or equivalent. ● Typically requires a minimum of 3+ years of system engineering related experience. ● Proficiency in requirements management tools and agile project management tools (Jira and Confluence preferred). ● Proficiency in applying DFMEA's, functional safety analysis and/or other systems engineering tools ● Proficiency is using common languages for data analysis and leveraging Ai tools as part of daily workflow Preferred Qualifications: ● Experience developing EV charging products or significant understanding of the EV charging space ● Compliance experience with UL/IEEE/SAE standards is a plus. ● Demonstrated experience in systems engineering within electric vehicle charging, power conversion equipment, and/or renewable energy (PV, energy storage). ● Experience working with high-voltage systems ● Confident in use of data analysis platforms such as Databricks ● Experience working with different communication protocols and integrating complex systems ● Ownership of key electrical sub-systems and functionals within new DC high power charging products ● Delivery of electrical hardware and charging functions by co-ordinating cross functional decision making between hardware and software teams ● Ownership of requirements development and coordination of sign off across multiple teams including vehicle, cloud and mobile ● Contribute to architecture development and electrical system-level design for all charging products ● Analyze and evaluate design impacts associated with alternate designs or new components and vendors. ● Collaborate with validation teams on system/sub-system plans for requirement traceability. This includes taking ownership of the requirements from definition through to comprehensive testing and verification. ● Proactively and independently solve routine problems, contributing meaningfully to team objectives. ● Work closely with the software team to define interfaces, troubleshoot issues, and ensure the successful integration of charging hardware and software systems. ● Analyze test data to identify performance trends and areas for optimization in electrical and power systems. ● Work closely with the design team to suggest and implement modifications that improve product performance, durability, and user satisfaction. ● Create and maintain essential technical documentation, including schematics, manuals, specifications, and test reports. ● As a highly skilled specialist, you will contribute to the development of concepts and techniques and complete complex tasks in creative and effective ways.

Job Description Are you a seasoned Electrical Engineer with over 5 years of experience seeking the next step in your career? Our clientan award-winning, industry-leading engineering firm consistently recognized as a "Best Place to Work" for over 15 yearsis looking for a Senior Electrical Engineer to join their dynamic team in Irvine, CA. Duties & Responsibilities Pre-Design & Site Analysis Conduct field surveys and assessments for electrical system design Compile detailed site assessment reports and gather technical data Develop electrical schematic designs during early project phases Design & Technical Execution Create single-line diagrams, riser diagrams, and circuit layouts Perform electrical calculations including arc flash, coordination, short circuit, voltage drop, and load flow using ETAP or SKM Select lighting fixtures and power equipment Design lighting and power circuiting and coordinate lighting control systems Develop fire alarm layouts in accordance with NFPA 72 and International Fire Code Design fire alarm risers, sequence of operations, and system calculations Produce detailed construction documents including enlarged plans, elevations, schedules, and diagrams Apply CAD/BIM standards and ensure compliance with California Electrical Code and Title 24 Energy Standards Coordinate effectively with mechanical, plumbing, telecom, civil, structural, and architectural teams Project Management & Leadership Manage multiple large-scale projects, coordinating with internal teams and external consultants Provide technical mentorship to junior and mid-level design engineers Lead project proposals and contribute to client development Maintain strong client relationships and actively pursue new business opportunities Construction Administration Review and respond to RFIs and submittals during construction phase Conduct field inspections, punch walks, and prepare final punch list documentation Ensure project execution aligns with design intent and code requirements Qualifications & Requirements Education & Licenses Bachelors or Masters degree in Electrical Engineering Registered Professional Engineer (PE) Required Experience 5+ years of professional electrical engineering experience (commercial, healthcare, institutional projects preferred) Proven experience leading design and managing engineering teams Skills & Technical Knowledge Proficient in AutoCAD, ETAP or SKM, and Revit Familiarity with HCAI standards (Healthcare Access and Information) is a plus Strong organizational skills, attention to detail, and ability to manage multiple deadlines Self-driven and collaborative mindset with strong technical communication skills Benefits 13 paid company holidays per year Comprehensive medical, dental, and vision insurance Employer-paid group life insurance Supplemental insurance (Accident, Critical Illness, Pet Insurance) Tuition and professional training assistance 401(k) plan with 100% employer match up to 4% of compensation (immediate vesting) Employment Type: Full time Location: Irvine, CA

Job Description Are you a seasoned Electrical Engineer with over 5 years of experience seeking the next step in your career? Our client-an award-winning, industry-leading engineering firm consistently recognized as a "Best Place to Work" for over 15 years-is looking for a Senior Electrical Engineer to join their dynamic team in Irvine, CA. Duties & Responsibilities Pre-Design & Site Analysis Conduct field surveys and assessments for electrical system design Compile detailed site assessment reports and gather technical data Develop electrical schematic designs during early project phases Design & Technical Execution Create single-line diagrams, riser diagrams, and circuit layouts Perform electrical calculations including arc flash, coordination, short circuit, voltage drop, and load flow using ETAP or SKM Select lighting fixtures and power equipment Design lighting and power circuiting and coordinate lighting control systems Develop fire alarm layouts in accordance with NFPA 72 and International Fire Code Design fire alarm risers, sequence of operations, and system calculations Produce detailed construction documents including enlarged plans, elevations, schedules, and diagrams Apply CAD/BIM standards and ensure compliance with California Electrical Code and Title 24 Energy Standards Coordinate effectively with mechanical, plumbing, telecom, civil, structural, and architectural teams Project Management & Leadership Manage multiple large-scale projects, coordinating with internal teams and external consultants Provide technical mentorship to junior and mid-level design engineers Lead project proposals and contribute to client development Maintain strong client relationships and actively pursue new business opportunities Construction Administration Review and respond to RFIs and submittals during construction phase Conduct field inspections, punch walks, and prepare final punch list documentation Ensure project execution aligns with design intent and code requirements Qualifications & Requirements Education & Licenses Bachelor's or Master's degree in Electrical Engineering Registered Professional Engineer (PE) - Required Experience 5+ years of professional electrical engineering experience (commercial, healthcare, institutional projects preferred) Proven experience leading design and managing engineering teams Skills & Technical Knowledge Proficient in AutoCAD, ETAP or SKM, and Revit Familiarity with HCAI standards (Healthcare Access and Information) is a plus Strong organizational skills, attention to detail, and ability to manage multiple deadlines Self-driven and collaborative mindset with strong technical communication skills Benefits 13 paid company holidays per year Comprehensive medical, dental, and vision insurance Employer-paid group life insurance Supplemental insurance (Accident, Critical Illness, Pet Insurance) Tuition and professional training assistance 401(k) plan with 100% employer match up to 4% of compensation (immediate vesting)

Electrical Systems Engineer Waev Inc. is an electric mobility OEM founded in 2021 to manufacture, distribute, market, and support the GEM, Taylor-Dunn and Tiger brands. GEM was the first commercially-produced, street-legal low-speed vehicle in the United States. GEMs shuttle people and goods across city centers, residential communities, government campuses, colleges and universities, and other micro-environments. Founded in 1949, Taylor-Dunn burden carriers, personnel carriers, and stockchasers have been trusted solutions in a broad range of commercial environments and provide premium reliability, safety features, and all-electric efficiency for industrial grade applications. Tiger heavy-duty tow tractors have been towing cargo, baggage, parcel, and other equipment in ground support applications since 1981. Waev's headquarters and factory are located in Anaheim, California. The Electrical Systems Engineer will be responsible for leading the LSV / industrial electric vehicle research, design and integration. This individual will support all aspects of engineering, specifically hardware such as sensors, motors, wire harnesses, and electrical control units. The Electrical Systems Engineer will work in an exciting, fast-paced team environment. Job Details Role and Responsibilities Lead the research, development and prototyping of new electrical architectures for LSV (Low Speed Vehicle) and industrial electric vehicles Lead the electrical hardware engineering activities and partner with mechanical engineering counterparts to integrate into next generation of LSV and Industrial electric vehicles Lead the electrical engineering release meetings and processes with mechanical engineering and the technical prototyping team and ensure built success Develop, manage and maintain electrical BOM, drawings, and electrical engineering specification Develop and manage all documentations of the requirements, designs and validation report Support all electrical engineering validation work to include testing of all system used in electrical vehicles Release high quality automotive drawings, components and systems Find best parts and best suppliers and develop competitive BOM costs Provide analysis and troubleshooting of the vehicles throughout the development process Provide technical guidance to the engineering teams, technicians and manufacturing workers Follow all company processes Qualifications and Educational Requirements Bachelor's Degree in Engineering or higher 4-6+ years hands-on Electrical Hardware System development experience 4-6+ leading D, V, and PI development processes Proven track record of automotive systems development and validation Hands-on experience in development of automotive electrical components Strong problem-solving, organizational, and analytical skills Excellent organizational, communication and leadership skills Preferred Skills Electric Vehicle development or relevant experiences Expertise on leading automotive validation processes and documentation Strong people skills, able to work in a fast-paced team environment Ability to work with domestic and international technology partners Microsoft software including Excel, Project, Word, Outlook and PowerPoint Working Conditions Role is full-time and in-person based within Waev's Anaheim manufacturing facility Fast paced office environment Design, prototyping, and test in facility Travel as needed (Up to 20%) EEO Statement Waev Inc is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Autonomous Systems Electrical Engineer Location: Irvine, California Position Description: The Autonomous Systems Electrical Engineer in this position will perform assigned electrical engineering tasks including circuit and subsystem design, system integration, troubleshooting, wire harness design, electromechanical/electrical system testing, and data analysis. This position reports to the Electrical Engineering Manager, while working directly with Vehicle Technical Leads and Program Managers. Responsibilities: Work with the team to design and build subsystem/hardware/software for our aircraft systems Prepare and create schematics, engineering drawings, test plans/procedures Collaborate with mechanical, GNC, manufacturing, aerodynamic, procurement, quality assurance, and project/program management teams Demonstrate and encourage adherence to best practices and standard procedures Required Skills/ Qualifications: Proven understanding of Electrical Engineering principles Demonstrated skills in troubleshooting, validating/testing, and analyzing subsystems/systems Experience in documenting designs and analyses with written reports Ability to design using CAD software such as Altium Proven communication and interpersonal skills Preferred Skills/Qualifications: Experience in designing robotic and/or aircraft systems UAV experience highly desired Hands-on experience with microcontrollers and firmware/software Experience in small to medium sized teams in an R&D environment Familiar with MIL spec hardware and harnessing standards Education/Experience: Bachelor's degree in electrical engineering with 3-5+ years progressive experience Working Conditions: The diversity of work conditions may range from an environment where there is little or no physical discomfort, such as a general office environment or warehouse. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must have the ability to stand, climb, occasionally lift a minimum of 25 lbs. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine Involves movement between departments, floors, and worksites to facilitate work. May be performing physical activities including, but not limited to, heavy lifting and moving of items, climbing in and out of equipment, crawling, and working outdoors. Other Requirements: It is an essential requirement for the person in this role to have a legal right to work in the United States and be eligible to obtain any required Export Authorization and DoD Clearance. Salary: $90,000 - $120,000 annually Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or $annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment. #LI-ONSITE

Work Schedule: Fully Onsite Assignment Length: 6 + month contract to (hire + multi-extension capability) Rate: 35.00 /hr. W2 + full Benefits We are seeking a motivated Field Test Engineer to support internal field testing efforts for mobile and wireless technologies. This role is heavily field-based and involves executing comprehensive test plans, analyzing KPIs, logging issues, and working closely with cross-functional teams. The ideal candidate is technically strong, comfortable working in the field most days of the week, and eager to grow in wireless testing and analysis. Education & Experience Bachelor's degree in Engineering or a related field 1-2 years of relevant experience required Primary Responsibilities Execute internal Field Test Plans, including: Data mobility testing Call processing validation Data throughput (Tput) testing Perform testing using Qualcomm and device-level diagnostic tools Conduct primary log analysis for upper-layer procedures, including: Registration procedures RLF KPI analysis Data throughput KPI analysis Report defects and issues using internal QC systems Collaborate with R&D and cross-functional teams to drive root cause analysis and issue resolution Spend approximately 4-5 days per week in the field executing test cases, including drive testing Required Technical (Hard) Skills Hands-on experience with Qualcomm tools: QXDM QPST XCAL KPI analysis using tools such as: XCAP QCAT Basic understanding of: SIP call flow Wireshark packet analysis Ability to test in driving conditions Willingness and ability to travel at short notice Bonus skills (preferred but not required): Scripting experience using Python and/or Perl Soft Skills & Competencies Strong teamwork and collaboration skills Effective verbal and written communication skills Ability to work with cross-functional teams and external partners when required Comfortable working independently in field environments Hands-on mindset with a willingness to learn new tools and testing methodologies Work Environment Fully onsite role-based in Irvine, CA The majority of time spent in the field executing test plans Fast-paced, collaborative, and technically challenging environment #IND #LI-DC2

REQUIREMENTS Candidates should have prior patent prosecution experience, including application drafting and will have a degree in mechanical engineering, electrical engineering, or similar field. Knowledge and experience with other forms of IP are a plus. Candidates must have outstanding written and oral communication skills, excellent academic credentials, and strong organizational and analytical abilities. Associate candidates must be barred in the state in which they will work. All candidates must be registered with the USPTO. SUMMARY Vanguard Intellectual Partners (Vanguard-IP) specializes in the placement of IP/Patent professionals nationwide. Our concentrated focus in these areas enables us to more deeply understand our clients' technical needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high-level contacts to get your resume noticed by the people who matter. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. CONFIDENTIALITY At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. Furthermore, we will always obtain expressed authorization before submitting your resume to any of our clients. **Should you have an interest in exploring opportunities in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Overview:Marathon Petroleum Corp. (MPC) offers internship and co-op opportunities to high-performing college students who want meaningful hands-on experiences in their fields of study. The following core values guide MPC's approach to doing business: safety and environmental stewardship; integrity; inclusion; collaboration; and excellence. Interns/co-ops work side-by-side with experienced professionals as contributing members of diverse work teams who create value for the company's shareholders. MPC believes that how we conduct our business is just as important as the bottom line. About the Logistics & Storage (L&S) Organization:The Logistics & Storage organization is the link between the Refining and Marketing components of Marathon. L&S transports crude oil and refined products to and from the refineries and onto storage terminals for distribution to retail marketing facilities, via pipelines and marine transportation operations. Logistics & Storage is comprised of four primary components: Logistics & Storage Engineering (L&SE) - L&SE provides engineering design and project management services to Terminals, MPL, and Marine. Terminals - Terminals play a prominent role in enhancing life's possibilities by blending, distributing, and delivering quality products in a safe, reliable, and competitive manner. Marathon Pipe Line Company (MPL) - MPL operates pipeline systems that move crude oil from production fields, other pipeline companies, and offshore platforms to MPC refineries, other refineries, and other pipeline systems. MPL also operates pipeline systems that move refined products from refineries to product terminals. Marine - Maintains and operates a large private inland petroleum products barge fleet, which is used to ship crude oil, intermediates, and refined products. Responsibilities:The purpose of the Logistics and Storage intern/co-op program is to identify and develop future technical and leadership talent for the benefit of MPC, the engineering intern/co-op, and the engineering profession. The intern/co-op program may consist of any number of work sessions. Multiple sessions give interns/co-ops the ability to rotate between the different L&S components in order to gain exposure to the various business segments and to offer a variety of assignments with increasing responsibility. Intern/Co-ops will gain experience in the 5 phases of the Marathon Project Management Process (MPMP) including Conceptual, Feasibility, Definition, Implementation, and Start-up/Close-out. Other responsibilities may include: + Development of project scope + Engineering oversight + Technical design + Cost estimating + Schedule development + Evaluating and summarizing bid sets + Construction supervision + Safety leadership + Coordination with operations groups + Project documentation + Travel ranges from 15-45% Qualifications: + Candidates must be pursuing a Bachelor's degree in Civil, Electrical, or Mechanical Engineering. + Concurrent enrollment in a Bachelor's degree seeking program for the duration of the experience. + Strong academic performance. + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Availability to work 40 hours per week. + Positions are available Spring, Summer, and Fall semesters. + Availability for multiple work terms is preferred. + Many projects will require travel to construction sites; therefore, a valid driver's license is required. + Military experience a plus. + MIN - $32.92 per hour / MAX - $41.67 As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00020050 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: La Palma, California, Salt Lake City, Utah Education: Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

At Bear Valley Electric, we work hard to provide our customers, with superior customer service, and safe, reliable, and quality power. We do it each and every day, safely and with confidence. Bear Valley Electric Service has served the Big Bear Valley since 1929. Today, we provide electric power to approximately 24,750 customers. We serve a resort community with a mix of full-time and part-time residents. These 23,250 residents represent more than 93 percent of our customers. We also serve approximately 1,500 commercial, industrial and public authority customers, including the Bear Mountain and Snow Summit ski resorts. Bear Valley Electric Service has implemented a comprehensive wildfire mitigation program, inserted cutting edge technology into all aspects of its business and operations and is aggressively pursuing a greener energy supply portfolio and a sweeping electrification strategy. THIS POSITION REQUIRES RESIDENCY IN OUR SERVICE AREA JOB DESCRIPTION: The Electrical Distribution Systems Engineer will evaluate, analyze and track a variety of regulatory requirements issued by numerous governmental agencies that impact Bear Valley Electric Service, Inc. 's (BVES, Inc. ) capital projects and field operations. The Electrical Distribution Systems Engineer's primary duty is to evaluate and monitor each project from beginning through end and to ensure that all federal, state, county and city regulatory requirements are met and to ensure continued compliance with such regulations. In addition, Electrical Distribution Systems Engineer is responsible for overseeing that the Company and its contractors comply with environmental, health, and safety (EH&S) regulations by developing and implementing EH&S policies and programs, conducting EH&S jobsite assessments, and ensuring compliance with EH&S training requirements. JOB SUMMARY: Performs a variety of Engineering compliance activities including environmental and code compliance / analysis with federal, state and local government agencies. Develops and integrates the BVES, Inc. capital projects long range plan ensuring compliance with current and future regulatory requirements. The incumbent will also be responsible for ensuring Engineering and Operations are compliant with Cal/OSHA requirements. This position requires a strong understanding of electric utility distribution systems, environmental, health, and safety regulations, code compliance, advance use of spreadsheets, AutoCAD, GIS, and other engineering enterprise systems. The incumbent interfaces with a variety internal departments and levels of management as well as external government agencies on a regular basis; therefore, good communication skills are essential. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Manages and ensure BVES, Inc. equipment (electrical components, etc. ) are complaint with federal, state and local regulatory requirements (environmental, safety, licensing, testing, etc. ). • Recommends projects to improve reliability and availability of the electrical distribution system. • Performs standard electrical distribution engineering design and planning activities to include overhead and underground systems and substations. • Performs work site surveillance to ensure compliance with work order and/or contract specifications. Audits completed work orders to ensure work is accurately documented and that the work performed is compliant with specifications. • Performs internal audits on compliance with California Public Utilities Commission (CPUC) mandated General Orders (GO) 95 and 165. • Reviews work orders to ensure compliance with electrical engineering design standards. • Interfaces with and represents BVES, Inc. with applicable federal, state and local agencies regarding compliance issues. • Establish and execute effective programs to evaluate each project from beginning to end and to ensure that all federal, state, county and city regulatory requirements are met. • Manage and ensure successful permitting and compliance with requirements from federal agencies including the US Forest Service, the US Bureau of Land Management and the US Fish and Wildlife Service. • Manage and ensure successful permitting and compliance with requirements from state and local government agencies including California Department of Fish and Game, the California Division of Occupational Safety and Health (DOSH, also known as Cal/OSHA), the California Department of Transportation (Caltrans), the Department of Transportation (DOT), the State Water Resource Control Board, the California Environmental Protection Agency (EPA), and the South Coast Air Quality Management District (SCAQMD). • Manage California Environmental Quality Act (CEQA) process when required for projects. • Represents BVES, Inc. at industry related events and conferences. • Manages schedules and reviews designs prepared by outside contractors to ensure compliance with company standards, safety orders, and governmental regulations • Acts in a lead capacity to plan, design, cost estimate, coordinate, and manage, modifications and or additions to company electrical facilities, including financial responsibility of project from onset through completion • Develops and implements EH&S programs. This includes creating, updating, and maintaining EH&S policies, procedures, and programs to meet regulatory requirements and industry best practices • Develops, executes, and documents BVES's EH&S training plan delivering safety training to employees on topics such as hazard recognition, emergency procedures, and the use of personal protective equipment (PPE). Ensures compliance with Cal/OSHA and other regulatory training requirements. Coordinates with the Learning Management System administrator to document EH&S training • Remains current on relevant EH&S regulations and ensuring BVES adheres to all applicable EH&S laws and standards. Ensures regulatory compliance with Cal/OSHA, applicable CPUC and OEIS requirements, and local ordinances. • Maintains accurate records and documentation of inspections, audits, training, incidents, and other EHS-related activities • Timely and professional correspondence with BVES, Inc. customers, stakeholders, and vendors. • Ability to effectively manage several concurrent projects that vary in complexity and priority. • Performs other duties as assigned REQUIRED SKILLS & MINIMUM QUALIFICATIONS: • Bachelor's Degree in Electrical Engineering (preferred), Civil Engineering, or closely related field. • Professional Engineer's (PE) license in the California is strongly desired. Note, that if the applicant does not have a PE in California, the applicant will be required to obtain a California PE license within 24 months of employment at BVES, Inc. in this position. • Experience in environmental, health, and safety programs and regulations preferred • Minimum of 3-5 years of experience in engineering or technical field • Strong experience with overhead and underground distribution and substation design. Knowledge of SCADA and automated grid systems are highly desirable • Excellent knowledge and strong experience in working in a highly regulated environment and working with a large number of agencies such as: US Forest Service, US Bureau of Land Management, US Fish and Wildlife Service, California Department of Fish and Game, California Division of Occupational Safety and Health (DOSH, also known as Cal/OSHA), California Department of Transportation (Caltrans), Department of Transportation (DOT), State Water Resource Control Board, California Environmental Protection Agency (EPA), and South Coast Air Quality Management District (SCAQMD) • Experience with California Environmental Quality Act (CEQA) process • Experience and working knowledge of CPUC General Orders 95, 128, 165 and 174 • Excellent interpersonal skills • Excellent verbal and written communication skills • Excellent computer software use skills including Word, Excel, Adobe, AutoCAD, and GIS • Collaborative/Team oriented • Organized with strong attention to detail and time management skills • High degree of initiative; self-starter Qualities of a Successful Electrical Distribution Systems Engineer: • Trustworthy; strong personal integrity • Demonstrates strong levels of accountability and ownership • Strong written and verbal communication skills • Solid presentation skills • Collaborative/Team oriented • Exhibits professionalism with internal and external contacts • Organized with strong attention to detail and time management skills • High degree of initiative; self-starter • Strong teambuilding skills. May include but not limited to standing, climbing, walking, lifting, bending, pulling and/or pushing, grasping, reaching, stooping and crouching, sitting, typing, walking, reading, writing, color determination, speaking and listening for extended periods of time. BENEFITS Our Company supports our employees with rich benefit programs and resources to help them thrive today and prepare for tomorrow. Benefit options include medical, dental, and vision plans with the Company currently paying 85% of the monthly premium for employees and their eligible dependents. We also offer paid vacation and sick time and twelve Company paid holidays per year. To help our employees plan for the future, we offer both a 401(k) retirement plan as well as a Defined Contribution Profit Sharing retirement plan. Additional benefits include life, AD&D, and LTD insurance as well as health savings account and flexible spending plans. COMPENSATION INFORMATION The compensation range provided is in compliance with state specific laws. Multiple factors are used to determine the actual starting rate of pay for all of our positions, including specific skills, years of experience, education, certification(s), and other job related factors. The responsibilities of this position will involve access to information that may be considered confidential, private and sensitive. Therefore, the individual filling this position will be required to both allow and pass a background check. NOTE: Reasonable accommodations will be made to enable individuals with special needs to perform the essential functions.