Electrical engineer jobs in Warner Robins, GA - 49 jobs

Industrial Electrical Technical Designer III The Industrial Electrical Technical Designer III will oversee all aspects of electrical engineering for multi-discipline industrial process design projects, ranging from small to large scope. Projects include facilities that process minerals, fertilizers, pulp and paper, and petrochemicals. Key Responsibilities Electrical Engineering Design: Perform power distribution design as a Senior or Lead Engineer, including conceptual studies, design analyses, calculations, equipment selection, and system layout for industrial processes and site electrical utilities. Client Engagement: Meet with clients to prepare and validate the proposed scope of work for electrical engineering services. Project Oversight: Oversee and coordinate electrical engineering projects, ensuring alignment with client budgets, contracts, goals, objectives, and deadlines. Team Coordination: Supervise and communicate with multi-disciplinary teams to ensure proper integration of electrical design with other disciplines. Staff Management: Direct, supervise, train, and ensure quality control for electrical engineers, EITs, and designers. Quality Control: Ensure staff compliance with quality control policies and conduct QC reviews for other engineers and designers. Documentation: Prepare and supervise the preparation of accurate electrical project programming, schematic designs, design development, and construction documents. Bidding Process Support: Provide electrical engineering support during the bidding process, including preparing addenda, and amendments, and responding to RFIs. Construction Phase Services: Represent the firm on-site, answer RFIs, review shop drawings, and prepare As-built drawings. Technical Input: Offer technical guidance, value engineering, and industry best practices. Independent and Collaborative Work: Work independently with minimal supervision while collaborating effectively with other engineers and designers. Mentorship: Mentor engineering staff to foster their professional development. Marketing and Business Development: Actively support company marketing and business development activities. Client Relationships: Establish and maintain positive client relationships. Process Improvement: Assist in developing new and revised processes and procedures. Other Duties: Perform additional responsibilities as assigned by project leaders and senior management. Project-Specific Duties Project Management: Perform Project Manager duties and serve as Lead Project Engineer on assigned projects. Discipline Design: Design and document industrial process electrical systems, developing discipline design approaches and methodologies. Project Planning: Develop project plans, budgets, schedules, and reports for electrical disciplines. Coordination: Coordinate work products with other disciplines and ensure adherence to project budgets and schedules. Quality Assurance: Perform QA/QC reviews on assigned projects and approve discipline code analyses. Client Interaction: Respond to RFIs and owner review comments, back-check discipline QC comments, and ensure compliance with project specifications. Travel: Potential travel up to 20%. Education, Technology, and Experience Experience: 10+ years of significant design and practice experience in a leadership role within an industrial or multi-discipline A&E firm. Education: Graduate of an ABET-accredited engineering program in Electrical Engineering or Electrical Engineering Technology. Professional Organizations: Active participation in IEEE, IES, or other related professional organizations is desirable. Software Proficiency: Familiarity with SKM Power Tools or equivalent, Microsoft Office, AutoCAD, MicroStation, and BIM. Additional Skills: Strong experience in designing power distribution, lighting, and communication systems. Familiarity with MSHA standards and Design/Build and EPC project delivery methods is desirable. Additional Knowledge, Skills, and Abilities Ability to prepare effective and concise documents and make presentations to various groups. Possesses technical precision, creative design skills, and a client-oriented attitude. Commitment to professional development and mentoring less experienced staff. Ability to work well in a team environment and lead by example. Physical Requirements The role is primarily sedentary and performed in an office setting with light, heat, and ventilation. It may require extended periods of standing, sitting, and minimal lifting. Reasonable accommodations can be made for individuals with disabilities. Workplace Flexibility Office Days: Mandatory office presence on Mondays and Thursdays to foster collaboration and innovation. Flexible Third Day: A third day in the office, to be agreed upon with your supervisor, offering a balance between work-life and consistent face-to-face collaboration. This structured and supportive environment aims to provide a balance between work-life and professional growth opportunities while ensuring the highest standards of electrical engineering practice.

Application Instructions: External Applicants: Please upload your resume on the Apply screen. Your application will automatically populate your resume details, and you may verify and update data on the My Information page. IMPORTANT: Please review the job posting and load ALL documents required in the job posting to the Resume/CV document upload section at the bottom of the My Experience application page. Use the Select Files button to add multiple documents including your Resume/CV, references, cover letter, and any other supporting documents required in the job posting. The "My Experience" page is the only opportunity to add your required supporting document attachments. You will not be able to modify your application after you submit it . Current Mercer University Employees: Apply from your existing Workday account. Do not apply from the external careers website. Log in to Workday and type Jobs Hub in the search bar. Locate the position and click Apply. Job Title:Senior Electrical Engineer Department:MERC College/Division:Mercer Engineering Research Center Primary Job Posting Location: Warner Robins, GA 31088-7810Job Details:Mercer Engineering Research Center (MERC) is recruiting for a Senior Electrical Engineer to support it Electronic Warfare and Avionics area. This is full time, on site position in Warner Robins, GA. DUTIES AND RESPONSIBILITIES • Responsible for leading, designing, and performing detailed engineering efforts in the assigned discipline, including but not limited to providing leadership and participating with a technical team in the conduct of the following tasks: Analyzing existing technology applications, processes, and products, taking into consideration costs, life cycle considerations, reliability, maintainability, productivity, and long-term support. Performing intensive technology research & evaluation of a broad array of alternative solutions to improve existing implementations. Defining and implementing advanced technological implementations and evaluations to provide risk reduction & determine production feasibility of improved and alternate technological implementations. Designing, implementing, and achieving operational status of advanced technological and engineering approaches to satisfy customer needs. • Responsible for organizing, conducting, and achieving detailed cross-functional engineering communication, design, evaluation, and implementations providing novel and unique functionality and capability through multi-disciplined engineering applications through: Organizing technical teams of multi-disciplined persons to construct a range of technological implementations and solutions for a problem area. Participation in multidiscipline design teams and process action team efforts. Preparing and presenting design alternatives to a multidiscipline review peer group. Preparing and implementing designs that apply multidiscipline solutions achieving breakthrough performance and unique technological applications. • Responsible for leading technical teams in their technical interface with present and perspective customers through the following activities: Diagnosing existing and perspective customer needs and opportunities through informal and formal interaction to understand present operations and limitations and customer priorities and needs. Leading teams in preparing and presenting detailed program presentations providing technical solutions, cost estimates, and implementation schedules, using information gathered both directly and indirectly to provide customer insight into technological capabilities that could significantly improve operations. Ensuring strong technical communication and understanding through use of terms, design illustrations, and operating paradigms that are common to the customer experience. • Gathers, tracks, maintains, and provides detailed technical, cost, labor, material, and schedule information on programs to senior managers including cost, schedule, and technical risk assessments at all stages of implementation. • Complies with all Executive Director approved MERC-wide policies and procedures. • Adheres to approved MERC MSP quality management policies and principles, and promotes an attitude of commitment to continuous quality improvement. • Ensures thorough familiarity and awareness of all MERC core capabilities and with the MERC current and potential customer base. • During all business-related activities, particularly during customer contacts, remains alert for any problem or opportunity that might lead to additional business for any MERC core business area. • Whenever possible, uses any available opportunity to promote MERC capabilities and interests to customers and potential customers. • Submits suggestions for new business opportunities or report identified customer problems or opportunities to the Director of Acquisition Strategy through a Chief Engineer. REQUIRED QUALIFICATIONS • US Citizenship is required. • Ability to obtain and maintain a DoD Security Clearance. • A Ph.D. in a relevant engineering field (e.g., EE, ME, AE, IE, SW, CE, Computer Science, etc.) from an ABET accredited institution and 3 years of directly related experience; or a Master's degree in same and 8 years of directly related experience; or an undergraduate degree in same and 9 years of directly related experience. • 3 years of technical lead responsibility. • Additional requirements may be added as appropriate and as specified in the specific Personnel Requisition Form. Final rank will be determined on the qualifications of the selected candidate. Application must include a cover letter and resume. BENEFITS OF WORKING AT MERC MERC is a non-profit applied research operating unit of Mercer University, a private university founded in 1833. Established in 1987 in Warner Robins, GA, MERC employs more than 200 engineers, scientists, professors, and support staff, who provide sustainable research solutions to government agencies, the Department of Defense, and commercial customers around the world. Warner Robins and the middle GA area are located 90 miles south of Atlanta and within easy driving distance of both the beach and mountains. The area is known for its Southern-style music, food, and restaurants and has a rich cultural and art presence, along with excellent health care and schools. MERC offers a generous benefits package including health and dental insurance, retirement, tuition reimbursement, vacation/sick leave accrual, and holiday pay. Why Work at Mercer University Mercer University offers a variety of benefits for eligible employees including comprehensive health insurance (for self and dependents), generous retirement contributions, tuition waivers, paid vacation and sick leave, technology discounts, schedules that allow for work-life balance, and so much more! At Mercer University, a Bear is more than a mascot: it's a frame of mind that begins with a strong desire to make the most out of your career. Mercer Bears do not settle for mediocrity or the status quo. If you're seeking an environment where your passion and determination are embraced, then you want to work at Mercer University. For more information, please visit: ********************************** Scheduled Weekly Hours:40 Job Family:Staff MERC Exempt EEO Statement: EEO/Veteran/Disability

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

A FirstCall Mechanical Company COMMERCIAL ELECTRICAL TECHNICIAN WHO IS FIRSTCALL MECHANICAL? Starr Electrical Contractors is a commercial and industrial Electrical services provider in the Macon metro area. Founded in 1947, Starr Electrcial Contractors partnered with FirstCall Mechanical in 2024. FirstCall Mechanical is a leading provider of commercial and industrial HVAC, building controls, electrical, and plumbing services. FirstCall serves a wide array of facility and customer types, including distribution centers, industrial plants, universities, airports, healthcare facilities, self-storage units, and more. With approximately 700 employees across Ohio, New York, Virginia, Tennessee, North Carolina, South Carolina, Georgia, Florida, and Texas, FirstCall is committed to building durable partnerships. The company is actively expanding its operations nationwide and partnering with organizations that share its dedication to quality and customer satisfaction. FirstCall Mechanical not only partners with companies to nurture growth in the market, but also provides equal focus on employee growth and development as well. We believe when YOU succeed, we all succeed, so we strive to be the first call for talented team members who want a career, not just a job. BENEFITS OVERVIEW FirstCall Mechanical values our employees' well-being, growth, and success! Employees are offered a robust benefits package, including: Competitive Weekly Pay Comprehensive Healthcare Coverage - Medical, Dental, Vision, Free Telehealth + More Financial Resources - 401(k) Retirement Savings Plan with a 5% match, Life Insurance, Short & Long-Term Disability Time-Off & Holidays - Up to 4 weeks of Paid Off, 9 Paid Holidays + Veterans Day for Veterans Career Growth & Development- Company-sponsored education and career advancement programs like the FirstCall Academy, the Learning & Education Assistance Program (LEAP), and the FirstCall Progression Program Generous Referral Bonus of $2,500 per referral Role-Specific Perks - Company vehicle or allowance, mobile phone or phone allowance, uniforms, and work boot and pants allowances POSITION OVERVIEW The Electrical Technician is responsible for performing intermediate-to-advanced level electrical tasks with minimal supervision. This role requires a solid working knowledge of electrical systems, strong troubleshooting skills, and the ability to work independently or as part of a team on installation, maintenance, and repair projects. JOB RESPONSIBILITIES Install, troubleshoot, and repair electrical systems including panels, circuits, switches, outlets, and lighting in accordance with NEC and local codes Read and interpret blueprints, schematics, and technical diagrams to execute electrical work accurately Perform preventive maintenance and diagnostic testing on electrical equipment using appropriate tools and meters Work independently or under the supervision of a journeyman or foreman to complete tasks efficiently and accurately Ensure compliance with all safety regulations and company procedures, including proper use of PPE and lockout/tagout protocols Identify material needs, pull wire, bend conduit, and make proper terminations. Provide mentorship and guidance to Electrical Technician I team members or helpers as needed Maintain accurate records of work performed, time spent, and materials used ACCOUNTABILITIES Complete assigned installations, diagnostics, and repairs accurately, meeting safety and performance standards Follow all safety procedures and wear required personal protective equipment (PPE) to minimize risk and maintain a safe job site Collaborate with journeymen, foremen, and peers to ensure smooth workflow and effective communication on job sites ORGANIZATIONAL ALIGNMENT This position reports to the local Branch Manager and is responsible for engaging with the install team and all of our customers. Qualifications QUALIFICATIONS High school diploma or GED required. 3-5 years of hands-on experience in electrical installation, service, or maintenance roles. Working knowledge of the National Electrical Code (NEC) and local building codes. Proficiency in reading electrical drawings, blueprints, and schematics Skilled in using electrical tools and testing equipment such as multimeters, ammeters, megohmmeters, and conduit benders Ability to work independently with minimal supervision and take initiative on job sites OSHA 10 or 30 certification preferred, or willing to obtain once hired Valid driver's license and reliable transportation Must pass background check and drug screening BEHAVIORAL PROFILE Language Skills Ability to clearly read and understand work orders, safety documentation, and technical diagrams. Can communicate effectively in one-on-one and small group settings with team members, supervisors, and clients. Mathematical Skills Ability to accurately calculate electrical loads, material measurements, and voltage/amperage. Proficient in applying math to troubleshoot and complete electrical tasks. Reasoning Ability Strong critical thinking skills to diagnose electrical issues, plan installations, and follow complex procedures. Capable of prioritizing tasks, working independently, and solving problems efficiently. Physical Demands Regularly required to stand, walk, bend, climb ladders, and use tools with precision. Must be able to lift 50 pounds and perform physically demanding tasks in a variety of environments and weather conditions. Requires vision abilities including close, distance, peripheral, and depth perception. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.

The Senior Electrical Engineer will work with Oglethorpe Power's project management team to oversee the engineering, procurement, and construction of a new 1,500 MW combined cycle facility in Forsyth, Georgia. This will include reviewing design drawings, equipment, and system specifications, as well as work packages, installation plans, and delivery schedules for electrical equipment. As the project progresses, focus will shift to the review of inspection and testing of individual pieces of equipment and systems, culminating in plant start-up and commissioning. This position will require coordination and communication with the turbine/generator OEM, Engineering Procurement and Construction (EPC) contractors, Owner's Engineer, and OPC management. Input to weekly/monthly metrics and reporting will be required to support tracking of the project's budget and schedule. Following commissioning of the new plant, the Senior Electrical Engineer will transition to the role of plant electrical engineer and have responsibility for a wide variety of duties. This will include planning major generator outages, design and selection of control systems, electrical inspections, NERC/SERC compliance, plant modifications, performance analysis, project management, as well as support for plant management and other Oglethorpe Power plants as needed. Job Duties: Electrical Engineering oversight during the construction and commissioning of a new combined cycle facility Monitoring equipment deliveries to ensure they will support the overall project schedule Providing input to the project schedule and attending project-related meetings Provide engineering support to ensure the Corporation's compliance with NERC Reliability Standards. This shall include technical evaluation of work required to comply with the Standards, performance and/or oversight of work required, evidence generation, procedure development, etc. Provide business, administrative, and technical support for plant managers and other personnel as needed Required Qualifications: Education: Bachelor's degree in electrical engineering or engineering technology (preferably BSEE) - Technical and business knowledge of natural gas-fired combined cycle generating plant operation, performance, and economics. Experience: This position is a Senior Engineer level position. 10+ years minimum engineering and five years minimum in an operating natural gas-fired combined cycle electric power generating plant is required, including planning, budgeting, preventive and predictive maintenance, and maintenance analysis. Specialized Skills: Project management software proficiency Ability to organize and manage time well and to work with autonomy Good interpersonal skills Strong oral and written communication abilities Good technical and business analytical skills Computer proficiency Ability to work directly with the Plant Manager and senior plant staff Licenses, Registrations, and/or Certifications: Professional Engineering (PE) license preferred and a valid driver's license that meets the insurance requirements under Oglethorpe Power's Drivers Qualification Program. Level II Thermographer or Level II Vibration Analyst certification desired. Travel: 10%

Procon Consulting is a leading construction management and technology consulting firm that has been delivering exceptional projects for over 25 years. As an ENR Top 100 CM/PM firm, we provide a dynamic environment where innovation meets strategic execution, making it an ideal place for talented professionals to advance their careers. We are currently seeking an experienced Electrical Engineer to join our team, focusing on federal healthcare projects. This role will encompass responsibilities related to construction management, design, and engineering, ensuring that complex healthcare facilities are delivered efficiently and effectively. Ideal candidates will possess a strong background in electrical engineering with a minimum of 5 years of experience in the field. Requirements Qualifications: Bachelor's degree in Electrical Engineering or a related field. A minimum of 5 years of relevant electrical engineering experience. Experience with federal healthcare projects is highly desirable. Professional Engineering (PE) license preferred but not required. Proficient in AutoCAD, Revit, and other engineering software. Strong understanding of construction management principles and project lifecycle. Excellent communication skills, both written and verbal. Ability to read and interpret technical drawings and specifications. Experience in working with multidisciplinary teams and contractors. Responsibilities: Design and develop electrical systems for healthcare buildings, ensuring compliance with industry standards. Collaborate with architects, engineers, and project managers to define project requirements. Review and approve design documents, ensuring technical accuracy and compliance. Conduct site inspections and monitor construction activities for compliance with design specifications. Provide technical support throughout the construction process, addressing any issues that arise. Assist in project management efforts, including schedule management and periodic reporting. Engage in project meetings and communicate effectively with all stakeholders. Benefits Salary commensurate with experience. Interested and qualified candidates please submit a cover letter and a resume. Procon offers competitive salaries and a comprehensive benefits package, including full medical/dental insurance and 401(K) plan. Procon is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, or any other protected factor.

Full-time Description Fouts Bros is a family-owned business since 1952 with facilities in Georgia and Texas. Fouts Bros is proud to have become one of the largest and most diverse commercial truck manufacturers in the US. Fouts Bros is committed to developing new commercial vehicles that provide industry-best value, quality, and dependability. Our company's core values are quality, efficiency, continuous improvement, safety, and teamwork. We believe in conducting business with honesty and transparency, continuously seeking new ways to improve and evolve, fostering relationships with our community and supporting local initiatives, and operating in an environmentally responsible manner to minimize our impact on the planet. Job Summary: The Electrical Engineer will design, develop, and maintain fire apparatus electrical systems and components to required specifications, focusing on product safety, reliability, quality, and sustainability. May also provide recommendations for electrical systems product development and improvement to ensure there is an electrical standard across all product platforms where applicable. This role involves working on projects from concept through completion, ensuring compliance with customer requirements, industry standards and regulations. Key Responsibilities: • Design and implement electrical systems for fire apparatus products. • Prepare and publish technical drawings, specifications, and documentation. • Conduct feasibility studies and cost analyses for electrical products and projects. • Perform testing, troubleshooting, and maintenance of electrical equipment. • Ensure compliance with NFPA standards, codes, and industry regulations. • Collaborate with cross-functional teams including mechanical engineers, project managers, purchasing, sales and production. • Research and apply new technologies to improve efficiency and performance. • Provide technical support during installation and commissioning phases. Qualifications: Education: Bachelor's degree in Electrical Engineering or related field. Experience: Minimum of three (3) years of experience in electrical design and engineering preferably within the large truck manufacturing industry. Skills: Proficiency in CAD (Solid Works) software and electrical design tools. Strong knowledge of electrical codes and standards (e.g., NEC, IEC). Analytical and problem-solving skills. Excellent communication and teamwork abilities. Preferred Qualifications: Professional Engineer (PE) license or equivalent certification (preferred). Experience with PLCs, automation systems, and power distribution. Working knowledge of NFPA standards. Fire service/apparatus industry knowledge and experience. Working Conditions: Office and field settings; occasional travel may be required to other company sites. (no remote work available) Ability to work on-site for inspections and installations.

SteerBridge Strategies is a CVE-Verified Service-Disabled, Veteran-Owned Small Business (SDVOSB) delivering a broad spectrum of professional services to the U.S. Government and private sector. Backed by decades of hands-on experience in federal acquisition and procurement, we provide agile, best-in-class commercial solutions that drive mission success. Our strength lies in our people-especially the veterans whose leadership, discipline, and dedication shape everything we do. At SteerBridge, we don't just hire talent-we empower it, creating meaningful career paths for those who have served and those who share our commitment to excellence. SteerBridge seeks a qualified Electrical Engineer (EE) to support construction, renovation, and infrastructure upgrade efforts for the Department of Veterans Affairs. The Electrical Engineer will provide remote support with occasional travel to support onsite collaboration and inspections. Responsibilities include the administration of design/build projects and facilities management tasks across various construction phases.Services will include, but are not limited to:· Pre-design and design phase support· Procurement, construction, and post-construction services· Contract administration and technical evaluations· Onsite support during scheduled field visits Benefits Health insurance Dental insurance Vision insurance Life Insurance 401(k) Retirement Plan with matching Paid Time Off Paid Federal Holidays Required Skills and Qualifications Must be authorized to work in the U.S. Must be eligible and able to pass a federal background check, as well as complete the necessary processes to receive a VA Personal Identity Verification (PIV) badge. Must provide a minimum of three (3) projects of the scale and difficulty of this project and scope of work in which he/she held a similar position. EDUCATION & YEARS OF EXPERIENCE Bachelor's Degree in Electrical Engineering from an accredited institution Minimum of six (6) years of combined experience in electrical design and construction Professional Engineer (PE) license Healthcare construction or VA facility experience is a plus PROFESSIONAL EXPERIENCE / QUALIFICATIONS Experience serving as a Construction Manager, Project Manager, or Owner's Representative on projects of similar scale and complexity Demonstrated ability to understand and apply local, state, and federal jurisdictional requirements Proficiency in interpreting and applying Building Codes, permitting processes, life safety regulations, and construction best practices Skilled in reviewing and providing professional recommendations on scopes of work, submittals, RFIs, and change orders Ability to monitor contractor performance, validate work quality, and ensure compliance with contract specifications and design documents Strong working knowledge of electrical systems, including power distribution, lighting, HVAC controls, emergency power, and low-voltage systems (fire alarm, telecom, etc.) Proficient in interpreting technical drawings and specifications to ensure design intent and constructability Competence in project phasing, scheduling, construction logistics, and resource planning Knowledge of OSHA safety regulations, Infection Control Risk Assessment (ICRA), and safety protocols in healthcare environments Familiarity with NEC, NFPA, IBC, and VA design standards for regulatory compliance Effective in managing project budgets, pay applications, cost tracking, and contract modifications Proficient in construction management software systems and general office applications Strong written and verbal communication skills, with the ability to collaborate effectively with VA staff, contractors, and multidisciplinary teams SteerBridge Strategies is proud to be an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants and employees are treated with respect and dignity-regardless of race, color, gender, age, religion, national origin, ancestry, disability, veteran status, genetic information, sexual orientation, or any other characteristic protected by law.We also provide reasonable accommodations for individuals with disabilities in accordance with applicable laws. If you require assistance during the application process, we encourage you to reach out so we can support your needs.

Experience serving as a Construction Manager, Project Manager, or Owner's Representative on projects of similar scale and complexity Demonstrated ability to understand and apply local, state, and federal jurisdictional requirements Proficiency in interpreting and applying Building Codes, permitting processes, life safety regulations, and construction best practices Skilled in reviewing and providing professional recommendations on scopes of work, submittals, RFIs, and change orders Ability to monitor contractor performance, validate work quality, and ensure compliance with contract specifications and design documents Strong working knowledge of electrical systems, including power distribution, lighting, HVAC controls, emergency power, and low-voltage systems (fire alarm, telecom, etc.) Proficient in interpreting technical drawings and specifications to ensure design intent and constructability Competence in project phasing, scheduling, construction logistics, and resource planning We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements 6+ YOE in EE Bach Degree in a Relevant Field PE License OR Strong Healthcare PM experience

Job Title: Avionics Engineer Senior Canvas provides engineering services and technical solutions for customers in federal and commercial markets. We are recognized by our customers and industry partners for our ethical standards, world-class technical expertise, and dedication to accomplish the mission in a responsive, efficient, and affordable manner. Duties: Minimum of two years of progressive experience in complex military electrical and/or electronic systems such as aircraft power distribution systems, microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics. Experience will include design, development, and integration of complex military electrical and/or electronic systems, and experience in overseeing design and development of hardware projects strong avionics software knowledge highly desired The Contractor will have knowledge of electrical engineering in support of avionics subsystem definition, development, integration, all verification methods, sustainment, modeling/simulation, Test and Evaluation (T&E), and Airworthiness (AW) certification across a wide range of hardware and software systems. The Contractor will provide advice and assistance with systems engineering processes, including planning, analysis, design, configuration management, development, integration, verification and validation, and cost and risk. The Contractor will translate customer requirements into hardware and software specifications. The Contractor will work with the design, development, and test teams in support of advanced software/hardware efforts. The Contractor will: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, and analysis; 3) participate in hardware evaluations; and 4) develop standards and guidelines for tasks being performed. The Contractor will develop technical requirements based on operational scenarios, across all phases of system development (including concept exploration, design, integration, test, and fielding) for highly complex systems/subsystems including the generation of Tailored Airworthiness Certification Criteria (TACC) or the modification of such criteria in the Modified Airworthiness Certification Criteria (MACC). The Contractor will participate in hardware evaluations and assist the Government in developing standards and guidelines for tasks being performed. The Contractor will support engineering tasks such as, but not limited to investigations and analysis, trade- off studies, quality evaluations, deficiency reports, and depot assistance requests. The Contractor will participate in events such as, but not limited to, Technical Interchange Meetings (TIMs), Preliminary Design Reviews (PDRs), Critical Design Reviews (CDRs), Physical Configuration Audits (PCAs), Functional Configuration Audits (FCAs), First Article Tests (FATs), and Configuration Change Boards for Airworthiness (CCB/AW). Requirements: · Master's or Doctorate degree in a related field and ten years of experience in the respective technical / professional discipline being performed, five years of which must be in the DoD or other USG ISR/SOF Organizations. · OR, bachelor's degree in a related field and 12 years of experience in the respective technical/professional discipline being performed, five of which must be in the DoD or other USG ISR/SOF Organizations. Must have successfully completed an undergraduate degree with a major in engineering from a college or university with an Accreditation Board of Engineering and Technology (ABET) accredited engineering program(s) for the degree requirements of the position (e.g., electrical, mechanical, aerospace). Degrees in engineering technology are not considered to be qualifying for these positions Security Clearance: Must be able to obtain and maintain a TS/SCI security clearance. About Us Founded in 2007, Canvas connects a passion for going beyond the expected with the knowledge and expertise to deliver what our clients need now and in the future. Canvas has been recognized as a Great Place to Work Certified ™, Fortune Best Small Workplace ™, Fortune Best Workplace for Millennials ™ (2022), Best Place for Working Parents (2022 & 2023), HIRE Vets Gold Medallion Awardee (2021 & 2022), Best Places to Work Awardee, 2019 Government Contracting - Technology Business of the Year, and Woman-Owned Small Business of the Year (2018) by the Huntsville/Madison Chamber of Commerce. Benefits of Working with Canvas To reflect our company culture, Canvas offers an exciting array of benefits that make up our employees' total package. Those benefits may include: Competitive Wages* Medical, Rx, Dental & Vision Insurance Generous company-funded Basic Life Insurance Company-funded Short-Term & Long-Term Disability 11 Paid Federal Holidays Generous Paid Time Off (PTO) Dependent Care and Medical Flexible Spending Accounts 401(k) retirement plan with company match and 100% immediate vesting Tuition Reimbursement for ongoing training, continuing education, or advanced degree programs Robust Employee Assistance Program Employee Referral Bonus Program Corporate Sponsored Events & Community Outreach Spot Awards for Exemplary Individual Performance Discretionary performance-based bonuses And many more! *Final compensation for this position is determined by a variety of factors, such as a candidate's relevant work experience, skills, certifications, and geographic location. Canvas is an Equal Opportunity Employer Canvas is an equal opportunity employer and a VEVRAA federal contractor who affords equal employment opportunity to protected veterans and people with disabilities. Canvas has equal employment opportunities that are based upon a candidate's qualifications and capabilities to perform the essential functions of a particular job and are free from discrimination based on race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, protected veteran status, genetic information, or any other characteristic protected by law. For our complete EEO/AA and Pay Transparency statement, please visit our Careers page. U.S. citizenship is required for most positions. Canvas is committed to expanding access to employment for people with disabilities and disabled veterans. If you are a qualified individual with a disability or a disabled veteran, and your disability prevents you from applying, please advise what reasonable accommodation Canvas can provide to assist you in applying for one of our open positions. You may contact us by sending an email to *********************. Reasonable accommodation is considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation for applying for a specific posted position will be responded to. Requests will be kept confidential and shared strictly on a need-to-know basis. Please be aware, scammers may try to impersonate our company by reaching out regarding job opportunities. We will never ask you for bank account information, checks, or other sensitive information as part of our hiring process. If you're unsure, please email ********************* with questions. For further information on Canvas including more information on employee benefits and our company culture, visit our website. Founded in 2007, Canvas connects a passion for going beyond the expected with the knowledge and expertise to deliver what our clients need now and in the future. Canvas has been recognized as a Great Place to Work Certified ™, Fortune Best Small Workplace ™, Fortune Best Workplace for Millennials ™ (2022), Best Place for Working Parents (2022 & 2023), HIRE Vets Gold Medallion Awardee (2021 & 2022), Best Places to Work Awardee, 2019 Government Contracting - Technology Business of the Year, and Woman-Owned Small Business of the Year (2018) by the Huntsville/Madison Chamber of Commerce. Benefits of Working with Canvas To reflect our company culture, Canvas offers an exciting array of benefits that makes up our employees' total rewards package. Those benefits may include: Competitive Wages* Medical, Rx, Dental & Vision Insurance Generous company-funded Basic Life Insurance Company-funded Short-Term & Long-Term Disability 11 Paid Federal Holidays Generous Paid Time Off (PTO) Dependent Care and Medical Flexible Spending Accounts 401(k) retirement plan with company match and 100% immediate vesting Tuition Reimbursement for ongoing training, continuing education, or advanced degree programs Robust Employee Assistance Program Employee Referral Bonus Program Corporate Sponsored Events & Community Outreach Spot Awards for Exemplary Individual Performance Discretionary performance-based bonuses And many more! *Final compensation for this position is determined by a variety of factors, such as a candidate's relevant work experience, skills, certifications, and geographic location. Canvas is an Equal Opportunity Employer Canvas is an equal opportunity employer and a VEVRAA federal contractor who affords equal employment opportunity to protected veterans and people with disabilities. Canvas has equal employment opportunities that are based upon a candidate's qualifications and capabilities to perform the essential functions of a particular job and are free from discrimination based on race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, protected veteran status, genetic information, or any other characteristic protected by law. For our complete EEO/AA and Pay Transparency statement, please visit our Careers page. U.S. citizenship is required for most positions. Canvas is committed to expanding access to employment for people with disabilities and disabled veterans. If you are a qualified individual with a disability or a disabled veteran, and your disability prevents you from applying, please advise what reasonable accommodation Canvas can provide to assist you in applying for one of our open positions. You may contact us by sending an email to *********************. Reasonable accommodation is considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation for applying for a specific posted position will be responded to. Requests will be kept confidential and shared strictly on a need-to-know basis. Please be aware, scammers may try to impersonate our company by reaching out regarding job opportunities. We will never ask you for bank account information, checks, or other sensitive information as part of our hiring process. If you're unsure, please email ********************* with questions. For further information on Canvas including more information on employee benefits and our company culture, visit our website.

Job Title: Avionics Engineer Senior Canvas provides engineering services and technical solutions for customers in federal and commercial markets. We are recognized by our customers and industry partners for our ethical standards, world-class technical expertise, and dedication to accomplish the mission in a responsive, efficient, and affordable manner. Duties: Minimum of two years of progressive experience in complex military electrical and/or electronic systems such as aircraft power distribution systems, microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics. Experience will include design, development, and integration of complex military electrical and/or electronic systems, and experience in overseeing design and development of hardware projects strong avionics software knowledge highly desired The Contractor will have knowledge of electrical engineering in support of avionics subsystem definition, development, integration, all verification methods, sustainment, modeling/simulation, Test and Evaluation (T&E), and Airworthiness (AW) certification across a wide range of hardware and software systems. The Contractor will provide advice and assistance with systems engineering processes, including planning, analysis, design, configuration management, development, integration, verification and validation, and cost and risk. The Contractor will translate customer requirements into hardware and software specifications. The Contractor will work with the design, development, and test teams in support of advanced software/hardware efforts. The Contractor will: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, and analysis; 3) participate in hardware evaluations; and 4) develop standards and guidelines for tasks being performed. The Contractor will develop technical requirements based on operational scenarios, across all phases of system development (including concept exploration, design, integration, test, and fielding) for highly complex systems/subsystems including the generation of Tailored Airworthiness Certification Criteria (TACC) or the modification of such criteria in the Modified Airworthiness Certification Criteria (MACC). The Contractor will participate in hardware evaluations and assist the Government in developing standards and guidelines for tasks being performed. The Contractor will support engineering tasks such as, but not limited to investigations and analysis, trade- off studies, quality evaluations, deficiency reports, and depot assistance requests. The Contractor will participate in events such as, but not limited to, Technical Interchange Meetings (TIMs), Preliminary Design Reviews (PDRs), Critical Design Reviews (CDRs), Physical Configuration Audits (PCAs), Functional Configuration Audits (FCAs), First Article Tests (FATs), and Configuration Change Boards for Airworthiness (CCB/AW). Requirements: · Master's or Doctorate degree in a related field and ten years of experience in the respective technical / professional discipline being performed, five years of which must be in the DoD or other USG ISR/SOF Organizations. · OR, bachelor's degree in a related field and 12 years of experience in the respective technical/professional discipline being performed, five of which must be in the DoD or other USG ISR/SOF Organizations. Must have successfully completed an undergraduate degree with a major in engineering from a college or university with an Accreditation Board of Engineering and Technology (ABET) accredited engineering program(s) for the degree requirements of the position (e.g., electrical, mechanical, aerospace). Degrees in engineering technology are not considered to be qualifying for these positions Security Clearance: Must be able to obtain and maintain a TS/SCI security clearance. About Us Founded in 2007, Canvas connects a passion for going beyond the expected with the knowledge and expertise to deliver what our clients need now and in the future. Canvas has been recognized as a Great Place to Work Certified ™, Fortune Best Small Workplace ™, Fortune Best Workplace for Millennials ™ (2022), Best Place for Working Parents (2022 & 2023), HIRE Vets Gold Medallion Awardee (2021 & 2022), Best Places to Work Awardee, 2019 Government Contracting - Technology Business of the Year, and Woman-Owned Small Business of the Year (2018) by the Huntsville/Madison Chamber of Commerce. Benefits of Working with Canvas To reflect our company culture, Canvas offers an exciting array of benefits that make up our employees' total package. Those benefits may include: Competitive Wages* Medical, Rx, Dental & Vision Insurance Generous company-funded Basic Life Insurance Company-funded Short-Term & Long-Term Disability 11 Paid Federal Holidays Generous Paid Time Off (PTO) Dependent Care and Medical Flexible Spending Accounts 401(k) retirement plan with company match and 100% immediate vesting Tuition Reimbursement for ongoing training, continuing education, or advanced degree programs Robust Employee Assistance Program Employee Referral Bonus Program Corporate Sponsored Events & Community Outreach Spot Awards for Exemplary Individual Performance Discretionary performance-based bonuses And many more! *Final compensation for this position is determined by a variety of factors, such as a candidate's relevant work experience, skills, certifications, and geographic location. Canvas is an Equal Opportunity Employer Canvas is an equal opportunity employer and a VEVRAA federal contractor who affords equal employment opportunity to protected veterans and people with disabilities. Canvas has equal employment opportunities that are based upon a candidate's qualifications and capabilities to perform the essential functions of a particular job and are free from discrimination based on race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, protected veteran status, genetic information, or any other characteristic protected by law. For our complete EEO/AA and Pay Transparency statement, please visit our Careers page. U.S. citizenship is required for most positions. Canvas is committed to expanding access to employment for people with disabilities and disabled veterans. If you are a qualified individual with a disability or a disabled veteran, and your disability prevents you from applying, please advise what reasonable accommodation Canvas can provide to assist you in applying for one of our open positions. You may contact us by sending an email to *********************. Reasonable accommodation is considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation for applying for a specific posted position will be responded to. Requests will be kept confidential and shared strictly on a need-to-know basis. Please be aware, scammers may try to impersonate our company by reaching out regarding job opportunities. We will never ask you for bank account information, checks, or other sensitive information as part of our hiring process. If you're unsure, please email ********************* with questions. For further information on Canvas including more information on employee benefits and our company culture, visit our website. Founded in 2007, Canvas connects a passion for going beyond the expected with the knowledge and expertise to deliver what our clients need now and in the future. Canvas has been recognized as a Great Place to Work Certified ™, Fortune Best Small Workplace ™, Fortune Best Workplace for Millennials ™ (2022), Best Place for Working Parents (2022 & 2023), HIRE Vets Gold Medallion Awardee (2021 & 2022), Best Places to Work Awardee, 2019 Government Contracting - Technology Business of the Year, and Woman-Owned Small Business of the Year (2018) by the Huntsville/Madison Chamber of Commerce. Benefits of Working with Canvas To reflect our company culture, Canvas offers an exciting array of benefits that makes up our employees' total rewards package. Those benefits may include: Competitive Wages* Medical, Rx, Dental & Vision Insurance Generous company-funded Basic Life Insurance Company-funded Short-Term & Long-Term Disability 11 Paid Federal Holidays Generous Paid Time Off (PTO) Dependent Care and Medical Flexible Spending Accounts 401(k) retirement plan with company match and 100% immediate vesting Tuition Reimbursement for ongoing training, continuing education, or advanced degree programs Robust Employee Assistance Program Employee Referral Bonus Program Corporate Sponsored Events & Community Outreach Spot Awards for Exemplary Individual Performance Discretionary performance-based bonuses And many more! *Final compensation for this position is determined by a variety of factors, such as a candidate's relevant work experience, skills, certifications, and geographic location. Canvas is an Equal Opportunity Employer Canvas is an equal opportunity employer and a VEVRAA federal contractor who affords equal employment opportunity to protected veterans and people with disabilities. Canvas has equal employment opportunities that are based upon a candidate's qualifications and capabilities to perform the essential functions of a particular job and are free from discrimination based on race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, protected veteran status, genetic information, or any other characteristic protected by law. For our complete EEO/AA and Pay Transparency statement, please visit our Careers page. U.S. citizenship is required for most positions. Canvas is committed to expanding access to employment for people with disabilities and disabled veterans. If you are a qualified individual with a disability or a disabled veteran, and your disability prevents you from applying, please advise what reasonable accommodation Canvas can provide to assist you in applying for one of our open positions. You may contact us by sending an email to *********************. Reasonable accommodation is considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation for applying for a specific posted position will be responded to. Requests will be kept confidential and shared strictly on a need-to-know basis. Please be aware, scammers may try to impersonate our company by reaching out regarding job opportunities. We will never ask you for bank account information, checks, or other sensitive information as part of our hiring process. If you're unsure, please email ********************* with questions. For further information on Canvas including more information on employee benefits and our company culture, visit our website.

Join this industry leading employee first company as a Process Control Engineer Process Control Engineer is responsible for the control system equipment, system software, and application software that controls the process: working with operating departments to implement control strategies for new process equipment; modifying/enhancing controls on existing process equipment: working with maintenance personnel and operations to identify and resolve problems with process equipment to allow the process to operate within specified limits JOB FUNCTIONS: Job functions include but are not limited to the following. Design and implement process control strategies including regulatory control, control sequence, logic, and advanced control for both continuous and batch processes. Develop, modify, and enhance HMI Monitor control system performance, which includes loop analysis and tuning Implement new control system technology Support process problem solving by identifying sources of process upsets and other anomalies. Develop and maintain alarm systems Support capital projects. Must be able to develop project justification and manage a capital project or sub-project related to process controls. Other duties as assigned. Qualifications SKILLS: Firm Foundation in industrial process knowledge. Experience with instrumentation and electrical systems associated with process control systems. Excellent computer skills particularly Microsoft including Outlook, Excel, Word, Project, Power Point. Highly competent in data analysis and use of process data historians such as OSI PI or Capstone ParcView. Understand P&ID drawings, loop sheets, and motor elementaries and be able to create these drawings as necessary to support project work and to maintain existing drawing using AutoCAD or equivalent drawing tools. BACKGROUND / EXPERIENCE: 3 - 8 years process control experience required. Good working knowledge of Distributed Control Systems (DCS) particularly Honeywell Experion or TDC; experience with Programmable Logic Controllers (Allen Bradley ControlLogix) is a plus EDUCATION / KNOWLEDGE: BS Degree in Engineering (Electrical, Mechanical, Chemical, or Pulp/Paper Science) Aligning Talent Consultants, LLC is NOT the EOR but is acting on behalf of the employer. This company is an equal opportunity employer and values diversity at their company, and does not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by law.

An international company with a facility in the Macon, GA area is currently seeking several Plant Controls Engineers for Direct Hire opportunities with their growing team. These are exciting opportunities for Plant Controls Engineers looking for a company that offers excellent growth opportunities and competitive rates. Plant Controls Engineers rates are anticipated to be $70,000 to $100,000 based on each candidates experience and education. All well qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and vision, performance-based bonuses, and quarterly incentive plans. Local candidates are preferred, but relocation assistance is available for well qualified candidates. Qualified Plant Controls Engineers will have most, if not all, of the following skills and experience: Bachelors of Electrical Engineering or closely related degree. 5+ years of recent/relevant experience with industrial controls for machining/manufacturing lines. Proficiency with PLC programming with Allen Bradley. Robotics experience is preferred. Experience with MES software is required. Proficiency with programming robots or creating the marriage between Fanuc or Schneider robots and assembly lines is preferred, but not required. Should you be qualified and interested please send an MS Word copy of your resume to Megan at [email protected].

Merit Electric is a national electrical contractor servicing the electrical needs for new construction in the retirement community market. Merit Electric's dedication to quality, safety, and excellent service on each project is what sets us apart from other electrical contractors. Our projects are nationwide and long-term. If you are interested in a career managing a quality workforce, please apply within. Job Responsibilities Responsible for coordinating and managing the day to day field operations of projects, including safe work practices, workforce, materials, and equipment. Supervises, mentors, and motivates company workforce on the project. Work closely with the Project Manager to oversee and ensure the assigned scope of work is completed per customer safety, schedule, and quality requirements. Plan and lay out areas of work in advance to ensure needed allocation of daily workforce, material, and equipment. Coordinate all electrical work with general contractor and subcontractors on project. Assist Project Manager and Estimating Team with pricing of any scope changes and change orders. Monitor workforce during installations and progress to ensure quality control throughout project. Manage daily progress reports and weekly time sheets for project workforce. Receive material and verify shipment quantities match material Purchase Orders. Track company tools and equipment and ensure they are maintained in good working order. Qualifications Minimum of 5 years' experience required running large scale electrical projects. Ability to read and understand construction blueprints and schematics. Electrical license preferred but not mandatory. Must have verifiable work experience and be willing to travel. Travel package is provided. Excellent organizational skills with careful attention to detail and timely follow-through. Excellent oral communication and interpersonal skills. Must be self-directed and capable of handling multiple tasks with minimal supervision. Able to work effectively in stressful, time-sensitive environments. Strong computer skills (Word, Excel, Outlook, etc.). High standard of integrity and professionalism. Compensation: Starting at $50,000 Are you looking for an opportunity to demonstrate your abilities with a leading electrical contractor? Merit Electric is a premier electrical contractor servicing new construction for the independent living industry. At Merit Electric, we provide high quality work on each and every job, ensuring our work meets the expectations of our clients. As a leader in the electrical field we take pride in being the trade that sets the bar for others on each project. Having earned a well-respected reputation in our industry, we are in search of professionals that are highly motivated and able to carry on our reputation with our clients. If you are such an individual then we want you on our Merit Electric team!

Description & Requirements Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The Opportunity Supports both PLC and DCS control systems throughout the mill. This position is responsible for designing and implementing controls, maintaining and troubleshooting control systems, and finding and implementing control improvements. In order to best support the mill's operations and capital projects this position acts as the primary process control representative to all Production areas (Utilities, Paper Mill, and Pulp Mill). The position also works across production areas to support to Multiple Projects in all areas of the plant. As the mill upgrades obsolete control systems, this position will share responsibility for working with outside engineering resources to research and answer technical issues ensuring successful, on-schedule migrations with event-free startups. This engineer also manages projects within the engineering team and with external engineering support / consultants. The controls engineers also stays current with technology and vendors. How You Will Impact Smurfit Westrock * Provide primary Process Control support to assigned production areas within the mill; work closely with process area owners to determine and meet process control needs. * Work with departments and other engineers to develop alternatives and estimates for proposed capital and major maintenance projects. * Provide Project Management and Process Control in the implementation of capital projects * Support of the Maintenance team in troubleshooting problems with the processes and the process control systems * Assist in training and knowledge sharing with operators and E/I mechanics on process control systems to help improve their operating and troubleshooting effectiveness * As part of the Process Control Team, share in the responsibility of providing weekend and off-hour support for Process Control mill needs * Plan, configure, test, implement, and maintain process control system upgrades and modifications What You Need To Succeed * Process Knowledge of Pulp and Paper Manufacturing. * Bachelor's degree in Engineering, preferrably Electrical Engineering or Electrical Engineering Technology * Strong computer skills including data analysis. * Experience with control loop tuning, performance evaluation tools and process data historians (i.e.OSI PI, Control Performance Monitor). * Experience with instrumentation and electrical systems associated with Process Control Systems. * Experience in Ethernet Networking and Industrial Communication Protocols. * Strong written and verbal communication skills. * Demonstrated ability to work in a team environment. * Demonstrated ability to work effectively with individuals at all levels of an organization. * Ability to manage multiple priorities. * Experience with Foxboro I/A Series DCS is a plus. * Ability to manage capital projects from concept to installation, start-up and commissioning support. Keywords: process control engineer, lead process control engineer, senior process control engineer, process control lead, process control leader, process controls engineer, senior controls engineer, senior process controls engineer, process controls, senior control engineer, senior controls engineer, lead controls engineer, lead control engineer, controls engineering, electrical engineer, bsee, electrical engineering, , PLC, plcs, plc's, instrumentation, plc, dcs, electrical engineer, HMI, hmi's, hmis, modbus, control logic, control systems, control system, commissioning, installation, panel design, OSISoft, process improvement, programming, troubleshooting, liner, linerboard, containerboard, kraft paper, paper, pulp, packaging, manufacturing, Honeywell, Honeywell DCS, Honeywell TDC, foxboro, Foxboro DCS, instrumentation, p2p, scada, loop Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

When it comes to being wild, we know a thing or two. We're not afraid of trying something new or the hard work it takes to make it happen. It's in our DNA. We've turned a family recipe into a new snacking category. And the wilderness into the world's largest meat snack business, that's still proudly family owned and operated. We're a company built by innovators, and are driven to not only satisfy your hunger, but to also feed your journey - whether that journey is on the road, on the run, at the campground, at the playground, in the office or in the moment. It's a journey we share with you. It's the journey forward of our people, of our communities, of our category…with a reverence for quality and an irreverence for the status quo. At Jack Link's Protein Snacks, we see every moment of every day as an opportunity to move forward, to forge new ground. To realize our vision of becoming the World's #1 Protein Snack Company. We never give up. You never give up. Together, we keep going. Are you wild enough to join us? Jack Link's Protein Snacks is a global leader in snacking and the No. 1 meat snack manufacturer worldwide. Family-owned and operated with headquarters in Minong, Wisconsin, Jack Link's Protein Snacks also has a large corporate hub in Downtown Minneapolis, Minnesota. The company is made up of over 4,000 passionate team members, across 11 countries, who share an uncompromising commitment to delivering awesome products and feeding the journey of those who move things forward. The Jack Link's Protein Snacks portfolio of brands includes, Jack Link's, Lorissa's Kitchen, BiFi, Peperami, Wild River, Golden Island and Country Fresh Meats. JOB DESCRIPTION SUMMARY The Sr. Controls Technician's job is to keep the plant and equipment running in a safe and efficient manner. Maintains and repairs buildings and equipment. Carries out responsibilities in accordance with company policies and procedures. DIRECT REPORTS None DUTIES AND RESPONSIBILITIES The duties and responsibilities of this position shall consist of, but not be limited to, the following: Daily work: Maintain and troubleshoot software programs for process control systems, including PLC/PC controllers and industrial networks such as Ethernet and DeviceNet, motor control systems, servo drives, robotics, variable frequency drives, SCADA/MES, and electrical distribution systems. Comply with arc flash, confined space, hot work, LOTO procedures and policies. Communicate technical issues and project timelines with leadership, operations, and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems. General: Assist in developing specifications for instrumentation, controls, and electrical components. Read and interpret software control logic, electrical diagrams, manuals, and drawings. Perform installation, maintenance, testing and calibration of general control systems, transmitters, gauges, control valves, transducers, probes, level switches, pressure switches, temperature switches, flowmeters, and associated equipment that send and receive data. Attend technical conferences and seminars to maintain knowledge of control system processes and procedures. Help train and develop shift maintenance technicians on controls systems concepts and procedures. Must be a team player capable of working on multiple projects, must take initiative with assignments and be proactive with safety and add value in group projects. Other duties as assigned. Qualifications REQUIRED EDUCATION AND EXPERIENCE Required Education: Associate degree in electronic technology or related field, or 5 years equivalent experience. Required Experience: Thorough understanding of PLC I/O and TCP/IP. Preferred: Undergraduate technical degree and previous experience working in a meat processing facility. Robotics maintenance and troubleshooting experience. Ammonia refrigeration experience. Experience working in food manufacturing environment. English/Spanish bilingual. REQUIRED SKILLS, KNOWLEDGE, AND ABILITIES Ability to identify, maintain, troubleshoot, and modify Allen Bradley Studio 5000 PLC's and PLC components. Ability to identify, maintain, troubleshoot, modify, and program AB HMI components. Ability to identify, maintain, troubleshoot, and modify Fanuc Robotics system components and controls. Ability to identify, maintain, troubleshoot, and modify Motor Controls including motor starters, Variable Frequency Drives (VFDs), DC drives, and standard electrical components. Industrial electrical distribution systems with hands-on experience and troubleshooting, including 120/208/240vac 3-phase, 277/480vac 3-phase, and 24VDC systems. Ability to identify, maintain, troubleshoot, and modify multiple Industrial Ethernet networks and VLANs including cabling, unmanaged and managed switches, and all other associated devices. Ability to execute project tasks assigned. Reasoning, analytical, and problem-solving skills. Ability to interpret and modify drawings both mechanical and electrical. Ability to identify, maintain, and utilize SCADA systems and KPI's. A willingness to learn and grow their controls and automation skills. Ability to train others with lesser skills. Ability to interpret and understand policies and procedures. The ability to perform heavy physical work, exercising up to 50 pounds of strength frequently to lift, carry, push, pull, or otherwise move objects. Work involves stooping, crouching, kneeling, reaching, standing, walking, and grasping. Additional Information The starting rate for this role is $80,000-$95,000(Annually). Actual salaries will vary based on several factors, including but not limited to external market data, internal equity, location, and candidate skill set and experience. Base pay is just one component of Jack Link's Total Rewards package for Team Members. Other rewards may include annual incentive and program-specific awards. Jack Link's provides a variety of benefits to eligible Team Members, including medical, dental and vision benefits, life and disability insurance, 401k participation, paid holidays, and paid time off. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by a Team Member to be successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Team Member is regularly required to sit, use hands to finger, handle, or feel and talk or hear. The Team Member is occasionally required to stand, walk, and reach with hands and arms. The Team Member must occasionally lift and/or more up to twenty-five pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those a Team Member encounters while performing the essential functions of this job. The work environment is a plant/office setting with varying degrees of temperatures and noise levels. Exposure to manufacturing equipment movement and wet/slippery floors. However, the vast amount of work is conducted in a climate-controlled office. Travel may be required. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER: Jack Link's provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic that is protected by federal, state or local law. E-VERIFY: Jack Link's is participant in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For information about the E-Verify program, please visit: *************************************** All your information will be kept confidential according to EEO guidelines.

Project Engineer, Georgia - 2500029P Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. About the Job: The Project Engineer will ensure safety, inspect plant systems, and support operations across multiple sites across Georgia, including Atlanta, Macon, Columbus, and others. Responsibilities include project management from design to implementation, structural design, plant troubleshooting, technical support for the SHE department, and anything else related to the mining operation. Movement between quarries will be necessary on an almost daily basis. There will also be opportunities to interface with work in other areas of the Division. What You'll Do: Manage Design. Uses AutoCAD to perform design tasks and produce drawings. Draws on internal/external mechanical and civil designer resources as required, who produce the majority of drawings. Inspect. Provides field supervision/inspection services on construction projects. Performs post-project review to ensure key objectives, cost/performance improvements, and rate of return are achieved. Prepare Bid Packages. Prepares bid packages for construction and manages construction contracts. Provide Updates. Provide project updates on a regular basis to various stakeholders about strategy, adjustments, and progress. Represent the Company. Represents the company to industry associations, government officials, and public agencies. Additional Responsibilities. Other duties as assigned. Travel. Varies based on projects, up to 25%. Most travel will be in central Georgia. Qualifications Skills You'll Need:Education. BS degree in Civil or Mechanical Engineering. Mining Engineering degrees considered with substantial civil/mechanical/project experience. License. Being on the path to PE licensure is preferred. Experience. 1-5 years of project management and related experience with experience in a heavy industrial or mining environment. Strong familiarity with project management and engineering software tools, methodologies, and best practices. Recent graduates considered with substantial co-op or other work experience. Basic understanding of preparing a project scope, budget, and timeline. Must have competent knowledge of concrete and steel design, building codes, and construction practices. Fundamental project management skills are desired. Other essential skills include some competency with AutoCAD and being fully functional with the Microsoft Office suite. Leadership Skills. Acts decisively and supports all aspects of the company to work together to accomplish the objectives, vision, mission, and values of Vulcan. Trusts and allows people to do their job, holding them accountable for the full extent of their responsibilities. Develops innovative solutions to problems by trying non-obvious or non-traditional approaches. Organizational Skills. Identifies and defines clear short-term goals and/or work outcomes that are required to implement strategic goals. Problem Solving. Proven ability to solve problems creatively and effectively. Detail oriented. Follows through with commitments and solves problems in a timely fashion. Deals skillfully and promptly with new situations. Ask a series of probing questions to go beyond surface issues and fully understand the components of a problem and its root causes. Analytical Skills. Verifies assumptions or interpretations by checking with credible sources or through first-hand observation and data-gathering. Computer Skills. Advanced computer skills including spreadsheets and Microsoft Office Suite is required. Skill in drawing and designing with AutoCAD/land desktop preferred. Interpersonal Communication. Must possess strong interpersonal skills and must be extremely resourceful. Communicates clearly and listens carefully in an open, candid, and consistent manner. High Integrity. Acts with unyielding integrity and honesty in business transactions, promoting company policies and holding self and other employees accountable, keeping promises and commitments. Honors your commitments to yourself and others. Acknowledging and correcting your own mistakes. Taking full ownership to address and fix problems vs. deflecting blame to others. Safety-Oriented. Sets a safety tone for all activities; and upholds the highest standards for protecting people and the environment. What You'll Like About Us:Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts our daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, and Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. Job: Engineering Primary Location: Georgia-Atlanta Other Locations: Georgia-Columbus, Georgia-Macon Organization: GM - SOD DIV OH Schedule: Full-time Job Posting: Sep 2, 2025, 4:24:25 PM

Oglethorpe, GA Pay Rate: $106,700-$130,500 Multiple factors, including Individual experience, skills and abilities will determine where an employee is ultimately placed in the pay range. Category/Shift: Salaried Full-Time About The Role: The key accountabilities listed below are not to be considered all-inclusive; a team member may be required to perform additional tasks, as directed, based on changing business needs of the company. Understand the project delivery process and help define project scope, goals and deliverables that support business goals, mill safety, reliability, and improvement efforts. Provide process control support to both capital and maintenance projects by developing a clear understanding of business objectives, identifying control objectives required to meet business objectives for assigned area and implementation of those objectives. Lead or participate in evaluating and selecting the best control strategy, implementing and testing control strategy for projects with controls scope. Responsible for improving performance in key process control metrics such as alarms, operator interventions, control's utilization and performance for assigned areas. Responsible for the day-to-day development, support, maintenance and implementation of advanced process control applications, process optimization, process information management systems and alarm databases. Manage, support and/or coordinate capital and expense projects with control scope. Work independently and jointly with Operators and Engineers to Improve, develop, and implement control strategies that improve plant safety, process performance, profitability, and efficiency. Work jointly with the Process Control Application Technician (PCAT) within assigned operating area to ensure adequate support in maintenance, troubleshooting, tuning, and enhancing existing control schemes: Lead loop tuning efforts on tuning control loops Helps to set the weekly direction and focus for the PCAT work in assigned areas Create and provide instruction for training of Operations, I&E Maintenance and Technical personnel on control subjects as needed. Works under the direction of the process control group leader to be the primary daily process control support to assigned area within a Pulp Mill. Quality Expectations Ensure an understanding of quality policy and support efforts for a positive customer experience. Aid in the execution of mill-wide quality efforts as needed to help maintain mill quality standards. About You: Knowledge, Skills, and Abilities Minimum: BS Degree (minimum) in engineering (Chemical, Electrical or Mechanical). Knowledge and skills in the area of process control engineering, which includes but not limited to Honeywell DCS and Emerson Delta V control systems; industrial communications networks; field instruments, valves and analyzers; multivariable control, and Program Logic Controls, or ability to build understanding and knowledge quickly in those areas. Minimum 2-5 yrs. experience in process control Preferred: Preferred experience in Pulp and Paper process, process control, project engineering, maintenance, or operations. Strong project team or task group leadership skills. Good understanding of control systems theory and application. Ability to coach and lead technical resources. Excellent planning and project development or management About Global Cellulose Fibers (GCF): Our GCF business helps customers transform renewable cellulose fibers into essential everyday products. Our safe, high-quality pulp forms the basis for a wide range of applications like towel and tissue products, diapers, feminine care, incontinence and other personal care products that promote health and wellness. In addition, our specialty pulp serves as a sustainable raw material used in construction materials, paints, coatings and more. GCF generated $2.8B in revenue in 2024 and has 3,300 employees globally, with nine manufacturing facilities and eight regional offices. Additional information can be found by visiting globalcellulosefibers.com. Why GCF: Global Cellulose Fibers promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. We've Got You Covered: At Global Cellulose Fibers, our employees are our most important asset and that's reflected in our benefits package that includes health, welfare and retirement plans. We are proud to offer a variety of benefits to support our employees and their families, including: Medical, Dental, Life insurance Flexible Spending Accounts Short-term and Long-term Disability 401(k) and Company-funded retirement contributions Paid Time Off Physical Location of Position: Flint River Mill 2449 Stagecoach Rd Oglethorpe, GA 31068 Global Cellulose Fibers is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Global Cellulose Fibers complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact accommodations@gcfibers.com or **************.

Job Description The Senior Electrical Engineer will work with Oglethorpe Power's project management team to oversee the engineering, procurement, and construction of a new 1,500 MW combined cycle facility in Forsyth, Georgia. This will include reviewing design drawings, equipment, and system specifications, as well as work packages, installation plans, and delivery schedules for electrical equipment. As the project progresses, focus will shift to the review of inspection and testing of individual pieces of equipment and systems, culminating in plant start-up and commissioning. This position will require coordination and communication with the turbine/generator OEM, Engineering Procurement and Construction (EPC) contractors, Owner's Engineer, and OPC management. Input to weekly/monthly metrics and reporting will be required to support tracking of the project's budget and schedule. Following commissioning of the new plant, the Senior Electrical Engineer will transition to the role of plant electrical engineer and have responsibility for a wide variety of duties. This will include planning major generator outages, design and selection of control systems, electrical inspections, NERC/SERC compliance, plant modifications, performance analysis, project management, as well as support for plant management and other Oglethorpe Power plants as needed. Job Duties: Electrical Engineering oversight during the construction and commissioning of a new combined cycle facility Monitoring equipment deliveries to ensure they will support the overall project schedule Providing input to the project schedule and attending project-related meetings Provide engineering support to ensure the Corporation's compliance with NERC Reliability Standards. This shall include technical evaluation of work required to comply with the Standards, performance and/or oversight of work required, evidence generation, procedure development, etc. Provide business, administrative, and technical support for plant managers and other personnel as needed Required Qualifications: Education: Bachelor's degree in electrical engineering or engineering technology (preferably BSEE) - Technical and business knowledge of natural gas-fired combined cycle generating plant operation, performance, and economics. Experience: This position is a Senior Engineer level position. 10+ years minimum engineering and five years minimum in an operating natural gas-fired combined cycle electric power generating plant is required, including planning, budgeting, preventive and predictive maintenance, and maintenance analysis. Specialized Skills: Project management software proficiency Ability to organize and manage time well and to work with autonomy Good interpersonal skills Strong oral and written communication abilities Good technical and business analytical skills Computer proficiency Ability to work directly with the Plant Manager and senior plant staff Licenses, Registrations, and/or Certifications: Professional Engineering (PE) license preferred and a valid driver's license that meets the insurance requirements under Oglethorpe Power's Drivers Qualification Program. Level II Thermographer or Level II Vibration Analyst certification desired. Travel: 10% Job Posted by ApplicantPro