Electrical engineer jobs in Wyoming - 172 jobs

The Data Center Engineering Analytics and Modeling (DCEAM) organization is seeking a Power Systems Engineer to lead grid to rack electromagnetic transient (EMT) simulations for AI data centers. You will develop detailed MV/LV power system models from the utility source through the IT load to analyze transient performance, harmonic distortion, protection, grounding, and UPS-generator interactions. These models will be used to ensure power quality, stability, and reliability across all operating modes. You will support projects from site selection and design through commissioning and integrated systems testing (IST), working closely with design, operations, vendor, and utility teams. **Responsibilities** **Responsibilities** + Develop & Maintain EMT Models: MV sources; transformers (saturation/inrush); grounding; cables; UPS/DRUPS; generators (AVR/governor); STS/ATS; Busway/PDU/RPP; filters/FACTS; VFD-driven HVAC. + Conduct Dynamic Performance and Transient Studies: Generator-UPS Compatibility; Large block load step (GPU ramp-up) response; Transformer inrush and load transfer; Generator start and transfer sequences; UPS input/output switching and bypass events; Black Start; Frequency Stability; Rotor-Angle Stability; Voltage Stability / Voltage Ride Through. + Conduct Power Quality Studies: Flicker / Voltage Step Analysis; Harmonic / Resonance scans and filter application; Inrush / Ferroresonance; Converter Limited Fault Behavior; Power Factor Correction. + Conduct Steady-State Analysis: Load flow / Voltage Drop; Short Circuit / Equipment Evaluation; Protection & Coordination; Arc Flash Hazard Analysis; Grounding Study + Support generator and UPS vendor coordination for paralleling, synchronization, and control system stability. + Generate FMU models for multi-domain simulations + Establish modeling standards, libraries, QA, version control; automate cases, sweeps, and reporting. + Review vendor black-box models; document assumptions and deliver clear, actionable reports. + Ensure compliance with internal security, data handling, and licensing policies for tools and models. + Collaborate with cross-functional teams (mechanical, controls, commissioning, etc.) to ensure electrical system stability under dynamic load profiles. + Author study reports and technical memos for design review and operational readiness. **Minimum Requirements** + BS in Electrical Engineering (power systems or power electronics); 3-5+ years EMT studies. + Proficiency in one or more: PSCAD/EMTDC, EMTP-RV, PowerFactory (EMT), ATP-EMTP, Simulink/Simscape. + Experience modeling UPS/inverters and synchronous generators; transformer saturation/inrush. + Knowledge of protection basics, grounding, harmonics, converter controls (PLL, current/voltage loops). + Ability to interpret one-lines, settings, control block diagrams, and test data. + Scripting for automation/data analysis (Python, MATLAB, or similar). + Familiarity with standards: IEEE 519, IEEE 1453/IEC 61000-4-15, IEC 61000 series, NEC/NFPA 70 or IEC 60364, IEEE C37. **Preferred Qualifications** + PhD/MS in Power Systems/Power Electronics or equivalent experience. + Professional Engineer (PE) license or eligibility (Electrical, Power discipline) + Data center design/operations (UPS topologies, STS transfers, generator paralleling, coordination). + Familiarity with AI/GPU rack power modeling, DC bus design, and bipolar bus applications. + Real-time/HIL (RTDS, OPAL-RT/HYPERSIM, Typhoon HIL) and hybrid RMS-EMT workflows. + Advanced harmonic/resonance mitigation (active/tuned filters, STATCOM/SVC). + Protection engineering for converter-rich systems and low-fault-current scenarios. + Experience with Git-based model governance and reproducible reporting. + Understanding of battery energy storage systems (BESS) and lithium-ion UPS topologies. + Knowledge of Microgrid architectures, and Distributed Energy Resources (DER); including their control strategies, operational modes (grid-forming, grid-following, islanded, and parallel operation), and integration with critical data center electrical infrastructure. + Knowledge of NEC 700/701/708 critical power distribution requirements. + Experience working with OEM data (Eaton, Schneider, ABB, Vertiv, Cummins, MTU). + Vendor model acquisition/validation under NDA; understanding of licensing/IP. Disclaimer: **Certain US customer or client-facing roles may be required to comply with applicable requirements, such as immunization and occupational health mandates.** **Range and benefit information provided in this posting are specific to the stated locations only** US: Hiring Range in USD from: $97,500 to $199,500 per annum. May be eligible for bonus and equity. Oracle maintains broad salary ranges for its roles in order to account for variations in knowledge, skills, experience, market conditions and locations, as well as reflect Oracle's differing products, industries and lines of business. Candidates are typically placed into the range based on the preceding factors as well as internal peer equity. Oracle US offers a comprehensive benefits package which includes the following: 1. Medical, dental, and vision insurance, including expert medical opinion 2. Short term disability and long term disability 3. Life insurance and AD&D 4. Supplemental life insurance (Employee/Spouse/Child) 5. Health care and dependent care Flexible Spending Accounts 6. Pre-tax commuter and parking benefits 7. 401(k) Savings and Investment Plan with company match 8. Paid time off: Flexible Vacation is provided to all eligible employees assigned to a salaried (non-overtime eligible) position. Accrued Vacation is provided to all other employees eligible for vacation benefits. For employees working at least 35 hours per week, the vacation accrual rate is 13 days annually for the first three years of employment and 18 days annually for subsequent years of employment. Vacation accrual is prorated for employees working between 20 and 34 hours per week. Employees working fewer than 20 hours per week are not eligible for vacation. 9. 11 paid holidays 10. Paid sick leave: 72 hours of paid sick leave upon date of hire. Refreshes each calendar year. Unused balance will carry over each year up to a maximum cap of 112 hours. 11. Paid parental leave 12. Adoption assistance 13. Employee Stock Purchase Plan 14. Financial planning and group legal 15. Voluntary benefits including auto, homeowner and pet insurance The role will generally accept applications for at least three calendar days from the posting date or as long as the job remains posted. Career Level - IC4 **About Us** As a world leader in cloud solutions, Oracle uses tomorrow's technology to tackle today's challenges. We've partnered with industry-leaders in almost every sector-and continue to thrive after 40+ years of change by operating with integrity. We know that true innovation starts when everyone is empowered to contribute. That's why we're committed to growing an inclusive workforce that promotes opportunities for all. Oracle careers open the door to global opportunities where work-life balance flourishes. We offer competitive benefits based on parity and consistency and support our people with flexible medical, life insurance, and retirement options. We also encourage employees to give back to their communities through our volunteer programs. We're committed to including people with disabilities at all stages of the employment process. If you require accessibility assistance or accommodation for a disability at any point, let us know by emailing accommodation-request_************* or by calling *************** in the United States. Oracle is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans' status, or any other characteristic protected by law. Oracle will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.

**The 'Apply with SEEK option' will be utilized for International applicants, mainly Australia. If this does not apply to you please use the 'Apply' option.** IF YOU CARE, THERE'S A PLACE FOR YOU HERE EFI Global is a full-service engineering, fire investigation, environmental, health and safety, and specialty consulting services firm serving a variety of industries in both the public and private sectors. Over the last four decades, we have grown from a boutique firm specializing in handling insurance fraud and arson cases and providing expert witness testimony, into a recognized global leader in engineering failure analysis, origin-and-cause investigations, environmental consulting, laboratory testing and specialty consulting. Our forensic investigation, engineering and environmental services teams around the world share a dedication to expertise, quality and demonstrating to customers that caring counts . Each of our more than 700 professional engineers, fire investigators, architects and scientists was selected for their technical proficiency, in-depth industry knowledge and commitment to professional integrity. Together, our diverse backgrounds and collective insights empower clients to make better-informed business decisions. EFI's combination of global solutions and local expertise has earned the firm a reputation for delivering timely responses that consistently meet our clients' expectations-anytime, anywhere. Click here to learn more about EFI Global. **PRIMARY PURPOSE** **:** To be responsible for the profitably of investigating events, systems, devices, and/or failures and providing expert opinions. **With a robust background in electrical engineering and a keen expertise in forensic analysis, this professional will bring a wealth of experience investigating electrical failures, diagnosing complex troubleshooting scenarios, and assessing incidents related to power distribution and generation. Adept at analyzing intricate circuitry, evaluating arc flash events, and understanding the nuances of lightning strikes and electrical fires, they are skilled in identifying root causes and devising comprehensive solutions. Their comprehensive knowledge of electrical components and systems, paired with a meticulous approach to both preventative and reactive engineering, ensures reliable performance and insightful evaluations across a wide spectrum of electrical challenges. Candidate must hold P.E. license in resident state.** **PRIMARY PURPOSE** **:** **To be responsible for profitably, ethically and scientifically investigating events, systems, devices and/or failures and providing expert opinions; to provide guidance and leadership on complex engineering assignments.** **Are You An Ideal Candidate? We are looking for enthusiastic candidates who thrive in a collaborative environment, who are driven to deliver results, are customer oriented and naturally empathetic.** **Apply your engineering knowledge and experience to investigate and assess complex failures in the context of an energetic, people focused, entrepreneurial culture.** **Deliver comprehensive engineering analyses to clients who represent virtually every industry and comprise some of the world's most respected organizations.** **Leverage EFI Global's broad, global network of experts to both learn from and to share your insights.** **Be a part of a rapidly growing, industry-leading global company known for its excellence and customer service.** **Take advantage of a variety of professional development opportunities that help you perform your best work and grow your career.** **Enjoy flexibility and autonomy in your daily work, your location, and your career path.** **Access diverse and comprehensive benefits to take care of your mental, physical, financial, and professional needs.** **ESSENTIAL FUNCTIONS and RESPONSIBILITIES** **Provides guidance and leadership to newer colleagues and/or those with less experience on complex engineering assignments.** **Surveys property, casualty and liability losses, typically at residential and commercial buildings and loss scenes.** **Conducts investigations to determine the root cause of events and failures.** **Works closely with engineers and investigators to produce detailed reports, drawings, and/or outline the cause and origin of losses and damages. ** **Develops plans, reports and drawings to meet client's needs and/or determine and document the failure analysis and causation of failures.** **Provides expert testimony in a court of law and/or in depositions.** **Determines applicable engineering practices to fulfill the prescribed scope of work, project specifics, timelines, and cost estimates for the professional services provided.** **Documents and maintains billable hours on a time and expense basis for failure analysis and engineering projects for clients.** **Collaborates with sales and operations managers, architects, developers, insurance adjusters, claims managers and attorneys to develop demand for your professional services.** **Collaborates with EFI's national team of forensic experts to leverage experiences and assist on projects.** **ADDITIONAL FUNCTIONS and RESPONSIBILITIES** **Performs other duties as assigned.** **Supports the organization's quality program(s).** **QUALIFICATIONS** **Education & Licensing** **Bachelor's degree from an accredited college or university required.** **Professional Engineering (PE) license is required.** **Experience** **Eight (8) years of experience or equivalent combination of experience and education required including two (2) years of engineering experience specifically in failure analysis and forensic engineering plus 2 years in insurance and/or risk management services industry.** **Skills & Knowledge** **Excellent oral and written communication** **PC literate, including Microsoft Office products** **Analytical and interpretive skills** **Strong organizational skills** **Excellent interpersonal skills** **Ability to work independently or in a team environment** **Ability to meet or exceed Performance Competencies** **WORK ENVIRONMENT** **When applicable and appropriate, consideration will be given to reasonable accommodations.** **Mental** **: Clear and conceptual thinking ability; excellent judgment and discretion; ability to handle work-related stress; ability to handle multiple priorities simultaneously; and ability to meet deadlines** **Physical** **:** **Must be able to stand and/or walk for long periods of time.** **Must be able to kneel, squat or bend.** **Must be able to work outdoors in hot and/or cold weather conditions.** **Have the ability to climb, crawl, stoop, kneel, reaching/working overhead,** **Be able lift/carry up to 50 pounds** **Be able to push/pull up to 100 pounds.** **Be able to drive up to 4 hours per day.** **Auditory/Visual** **: Hearing, vision and talking** **NEXT STEPS** **If your application is selected to advance to the next round, you will receive an e-mail notification or phone call from a recruiter to schedule an initial call.** Always accepting applications. _As required by law, Sedgwick provides a reasonable range of compensation for roles that may be hired in jurisdictions requiring pay transparency in job postings. Actual compensation is influenced by a wide range of factors including but not limited to skill set, level of experience, and cost of specific location. For the jurisdiction noted in this job posting only, the range of starting pay for this role is $115,000-$165,000_ _. A comprehensive benefits package is offered including but not limited to, medical, dental, vision, 401k and matching, PTO, disability and life insurance, employee assistance, flexible spending or health savings account, and other additional voluntary benefits. Always accepting applications._ Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Diego Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, the California Fair Chance Act, and all other applicable laws. The statements contained in this document are intended to describe the general nature and level of work being performed by a colleague assigned to this description. They are not intended to constitute a comprehensive list of functions, duties, or local variances. Management retains the discretion to add or to change the duties of the position at any time. Sedgwick is an Equal Opportunity Employer and a Drug-Free Workplace Our business is founded on people with the best technical skills and outstanding industry knowledge and we strive to employ and retain exceptional talent. EFI Global is an equal opportunity employer welcoming applications from all qualified persons. If you are interested in working for us, please visit our job board.

Position: Electrical Engineer Location: Sheridan WY- : 1 to 25 years. Revit/BIM experience is a plus- US CITIZENS ONLY About Us: At Associated Construction Engineering, Inc, we are a trusted name in the construction industry, providing innovative solutions for our clients. We take pride in our work and the talented professionals who make it all possible. Joining our team means being part of an organization that values collaboration, excellence, and a commitment to delivering top-tier construction services. Job Description: As an Electrical Engineer with us, you will have the unique opportunity to create construction documents and manage the construction process for a wide range of commercial and institutional building systems. Your expertise will encompass a variety of critical areas, including lighting, fire alarm, low voltage systems, power systems, and backup power systems. Your work will directly contribute to the success of our projects and the satisfaction of our clients. What You Bring: Experience ranging from 1 to 25 years in electrical engineering. BSEE with capability to obtain a PE in Electrical Engineering. Proficiency with Revit/BIM is a valuable asset. Strong problem-solving skills, adaptability, and attention to detail. Ability to work collaboratively in a team and communicate effectively. A passion for innovation and a commitment to delivering high-quality work. Why Choose Us: At Associated Construction Engineering, Inc, we are committed to fostering a work environment that promotes growth, career development, and a healthy work-life balance. When you join our team, you'll enjoy a range of benefits and opportunities, including: Competitive compensation packages Comprehensive benefits, including health, dental, and retirement plans Professional development and training programs A supportive, inclusive, and collaborative work culture A chance to work on exciting and challenging projects. Options for advancement are exceptional. The Job: Electrical design of power, lighting, and special systems plans Power: receptacle and mechanical equipment and owner equipment power connections, main electrical equipment room layouts, 1-line diagrams, emergency generator and uninterruptible power systems. Panel and equipment schedules. Lighting: light fixture layouts, lighting calculations, lighting controls, light fixture schedule Special Systems: fire alarm, voice / data, security, paging and public address systems We offer competitive wages and excellent benefits including 401(k), profit sharing, vacation, health, dental, vision, life and limited disability insurance. If you're ready to take your career in electrical engineering to new heights and be a part of an industry-leading team, we want to hear from you! How to Apply: To apply for this incredible opportunity with Associated Construction Engineering, Inc, please hit the "APPLY" link below. Don't miss your chance to become a vital member of our team and help shape the future of construction engineering in Montana and Wyoming! Join us at Associated Construction Engineering, Inc, and let's build a brighter future together!

Meta is hiring ASIC Formal Verification Engineer within the Infrastructure organization. We are looking for individuals with experience in Formal Verification to build IP and System On Chip (SoC) for data center applications. As a Formal Verification Engineer, you will be part of a team working with the best in the industry, focused on developing innovative ASIC solutions for Meta's data center applications. You will be developing comprehensive formal testplans and be responsible for complete formal verification sign-off of single or multiple complex blocks. The role also provides ample opportunities to partner and collaborate with full stack software, hardware, ASIC Design, Emulation and Post-Silicon teams towards creating a first-pass silicon success. **Required Skills:** ASIC Engineer, Formal Verification Responsibilities: 1. Provide technical leadership in Formal Verification 2. Propose, implement and evangelize the Formal Verification Methodology to be used across the group, both at the top level and at the block level 3. Work with Architecture and Design team to come up with formal specification and implementation 4. Define formal verification scope, create formal environment and close coverage with targeted Formal Verification Techniques at IP, Subsystem and SoC level 5. Build reusable/scalable environments for Formal Verification and deploying the tools 6. Evaluate and recommend EDA solutions for Formal Verification 7. Provide training for internal teams and mentoring engineers related to Formal Verification Technology **Minimum Qualifications:** Minimum Qualifications: 8. Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience 9. 8+ years of experience in Design Verification 10. 5+ years of experience in Formal Verification 11. Experience with Formal Verification applications including Datapath, sequential equivalence, Xprop, Clock Gating, connectivity etc 12. Proven understanding of Formal Verification methodologies, complexity reduction techniques and abstraction techniques 13. Proven analytical skills to craft novel solutions to tackle industry-level complex designs 14. Demonstrated experience with effective collaboration with cross functional teams 15. Fluency in hardware description languages, such as SystemVerilog and SVA 16. Proficiency in scripting languages such as Python, Perl, or Tcl 17. Experience with JasperGold or VC-Formal **Preferred Qualifications:** Preferred Qualifications: 18. Experience to quickly understand and interpret specifications and extract design behaviors/properties 19. Experience in formal property verification of complex compute blocks such as DSP, CPU, GPU or HW accelerators 20. Experience with complex SoCs 21. Formal verification experience in clock domain crossing, IP-XACT based register verification and low power 22. Experience with development of fully automated flows from specification to fully verified designs 23. Experience with simulators and waveform debugging tools **Public Compensation:** $178,000/year to $250,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Primary purpose: Provide electrical engineering subject matter expertise to support operation and maintenance of natural gas, crude oil, CO2, and water pipelines and facilities. **May be filled as an Engineer-Electrical I or II, pending candidate experience. Education: Bachelor's degree from an accredited institution in Electrical Engineering or a related field Specific Knowledge: National Electric Code (NEC) National Fire Protection Association code (NFPA) Institute of Electrical and Electronics Engineers standards (IEEE) Certifications, Licenses & Registrations: Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers (for travel) Competencies, Skills & Abilities: Intermediate proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint and Outlook Intermediate proficiency with data entry / survey forms and other methods of data collection Fundamental knowledge in the design of electrical systems for large industrial facilities Familiarity and ability to read and interpret electrical and mechanical blueprints and diagrams, including flow charts, Piping and Instrument Drawings (P&IDs), single line diagrams, electrical equipment schematics, MCC/SWGR elevations, and PDC layouts Effective communication abilities with engineering and non-engineering staff Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules Ability to self-start and prioritize concurrent tasks and efforts Physical Demands: All of the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting; standing; walking or moving throughout facility; driving; talking; seeing (specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus); hearing; feeling; bending or stooping; squatting or crouching; reaching; kneeling; pushing; pulling; lifting up to 25 lbs. Minimal safety hazards; general office working conditions. Must be able to sit for prolonged periods of time. The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and hear. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Working Conditions: Some overnight travel to may be required to engineering contractors, equipment providers, construction sites, and operations facilities. Required to carry a cell phone and be available to respond during working and non-working hours. The successful candidate will be required to clear a drug screen and a complete background check, including credit report for certain positions, after an offer has been extended and prior to being employed. Supervisory Responsibility: None PREFERRED EDUCATION, EXPERIENCE, CERTIFICATIONS, COMPETENCIES, SKILLS, & ABILITIES: Above the minimum requirements; not required but advantageous in this position: Experience with hydrogen, syngas, ammonia, or GTL processing facilities Experience SP-E (Smart Plant Electrical) /Autocad Electrical. Experience in arc flash studies including the use of relay coordination, short circuit, load flow, motor starting analysis, and transient stability software (SKM, ETAP, etc.). Experience in programming protection relays (Schweitzer-SEL,GE-Multilin, and Basler) Specific knowledge related to the electrical/mechanical design of rotating equipment including engines, turbines, pumps, and electric motor drives. Advanced proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint and Outlook Other Responsibilities: The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned. Essential duties and responsibilities: Orchestrate and oversee the completion of arc flash studies and other electrical safety efforts Orchestrate and oversee the completion of lightning mitigation installations Coordinate electrical grounding studies and assist with the implementation of recommended changes Develop and/or update company electrical standards including material specifications, standard operating procedures, best practices, major design installations, and operator qualifications Review electrical equipment vendor drawings and specifications Ensure that electrical field inspections, installation, measurement, and maintenance are consistent with company and industry standards Specify key electrical equipment such as medium and low voltage switchgear and motor control centers, transformers, VFD's, Soft Start's, UPS systems, DC systems, protective relay protection schemes, etc. Provide electrical engineering subject matter expertise in regards to new project design and equipment specification Ensure facility electrical drawings are accurate and up-to-date Interact internally and externally with a wide variety of people with tact, courtesy, and professionalism Maintain a high standard of ethical conduct Speak, both in person and by telephone, using a high level of verbal skills and careful listening Maintain regular, dependable attendance and a consistently high level of performance Will work non-traditional hours as needed Be available by phone during non-traditional hours Maintain a high regard for personal safety, the safety of company assets and employees, and the general public Other daily, weekly, monthly, or special project duties as identified and defined

FourFront Design, Inc. has an opening for a licensed Electrical Engineer. Responsible for designing electrical systems for commercial, industrial, and domestic buildings. Assists senior and lead engineers throughout the project to ensure that design components conform to municipal codes and engineering standards. Interacts with clients and maintains good client relationships with future projects in mind. Assists with final checks for accuracy of final plans and specifications submitted to client. Must be willing to affix professional engineering seal to plans and specifications created under own creation or directly supervised assistants. Uses computer assisted engineering design software and equipment. For information on FourFront Design Inc., including more information on projects, services, and our company culture, visit our website at ********************************* AAP/EEO Statement: As a federal contractor, we are an Equal Opportunity Employer for Minorities, Females, Protected Veterans and Persons with a Disability. Qualified applicants will be considered for employment without regard to race, color, sex, national origin, religion, age, marital status, veteran status, sexual orientation, disability, genetic information, or other characteristic protected under applicable Federal and State laws. About us: Mission: Craft legacies within the built environment that withstand challenges, elevate people, and leave a lasting impact. Culture: We aren't just architects or engineers, FourFront's people are as rich in experience and diverse in personal interest as the history of our great company. A shared goal in being deeply committed to where we live, work and play connects us all - and it makes us proud to be a Certified Woman-Owned Service-Disabled Veteran Owned Small Business. Pay wages: $86,000 - $110,000 annual (depending on experience and qualifications) Benefits: Paid vacation/sick accrual, 13 paid holidays, health, vision, dental, life insurance, disability insurance, retirement savings plan, paid parental leave, and continued education options. Details will be discussed during offer. Shift: 40 hours per week. Standard workdays and hours of FourFront Design Inc are Monday through Thursday, 7 AM to 5 PM and Friday 8 AM to 12 PM. Evening and weekend work may be required as job duties demand. Flexibility in schedule is considered if job duties are satisfactorily met. Experience Required: • Professional Engineering (PE) license required. • Minimum of 5 years previous electrical design experience. • Bachelor's degree or equivalent qualifying experience. • Willingness to apply for additional state or professional license when required. • Knowledge of LEED principles; encouraged to become LEED accredited. • Proficiency in Revit MEP, AutoCAD required; Visual-3D helpful. • Preferred RCDD certification but not required. • Preferred government and Veteran Affairs (VA) experience but not required. Duties: • Function as an electrical project engineer; responsible for the electrical design of commercial, medical, professional offices and other buildings. • Complete electrical design systems including building related electrical power distribution, lighting, and cabling systems. • Assist in assessing the requirements of the client's needs; Assure work meets the design and production aspects of the project. • Assist in project management tasks and be familiar with project management process. • Promote and provide expertise in sustainable design practices as required by the project. • Assist in the design review, construction budgets, and schedules and work accordingly to meet project requirements. • Apply proficient knowledge of applicable codes and ordnances. Work with code officials and other design professionals when an interpretation or exception to building codes is required. • Maintain up-to-date material and equipment/gear knowledge for selection, scheduling, design, analysis. Must be able to assist or perform evaluation of existing lighting, gear, and controls systems. • Interpret the intent of electrical contract drawings and specifications for the Client, General Contractor, Building Inspector, and other interested parties. • Review and redistribute schedules, shop drawings and samples. • Responsible for the accuracy and quality of all technical work. • Coordinate work of outside consultants. • Apply time-management skills for meeting deadlines. • Complete company-required drug test; completion of a background check and fingerprinting may be required by client. • Must be able to work in the United States.

**Electrical Consulting Design Engineer** Cogs have partnered with a well established MEP engineering company who are continuing their steady growth whilst maintaining excellent standard of commercial projects and design quality, across the products within their portfolio. Our client is expanding and because of the new projects coming in they are looking for an individual with hands-on design work experience alongside regular interaction with plumbing, mechanical, motors & drives, supporting preliminary and detailed designs for projects. The salary for this position is up to 120K Benefits of this position: Brain stimulating and complex projects which require critical thinking and diligence A constantly evolving facility with several changes and upgrades occurring High autonomy and trust within a motivated and positive team An opportunity for trajectory and upward mobility with a clear path for growth Ability to work cross functionally on different desired projects A light headed environment which offers a Hybrid schedule Responsibilities Providing technical support for proposals, estimating, engineering, procurement, and construction. Participating in project teams for design, analysis, or evaluation using engineering principles. Reviewing and approving equipment vendor quotes. Collecting and evaluating data to recommend courses of action. Handling multiple projects, providing compliant design packages meeting safety codes. Qualifications BSEE (from an ABET Certified Program) with capability to obtain a PE in Electrical Engineering in the State of Wyoming. Minimum 2 years of design experience within the commercial industry

TITLE: Commissioning Engineer II TerraPower is a nuclear technology company based in Bellevue, Washington. At its core, the company is working to raise living standards globally through a more affordable, secure and environmentally friendly form of nuclear energy along with innovations in medical isotopes to improve human health. In 2006, TerraPower originated with Bill Gates and a group of like-minded visionaries who evaluated the fundamental challenges to raising living standards around the world. They recognized energy access was crucial to the health and economic well-being of communities and decided that the private sector needed to take action and create energy sources that would advance global energy deployment. TerraPower's mission is to be a world leader in new nuclear technologies, while developing innovators and future leaders in the nuclear field. As a result, the company's activities in the fields of nuclear energy and related sciences are yielding significant innovations in the safety and economics of nuclear power, hybrid energy and medical applications - all for significant human health benefits. TerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. TerraPower is an Equal Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. In addition, as a federal contractor, TerraPower has instituted an Affirmative Action Plan (AAP) in an effort to proactively recruit, hire, and promote women, minorities, disabled persons and veterans. Commissioning Engineer II The Commissioning Engineer II reports to the USO Commissioning Manager and is focused on the integrated design, commissioning, and operation of plant systems, structures and integrated analysis of the facility with a focus on Commissioning plan and product development. In this role, you will act as an Operations Engineer for TerraPower's Natrium project. This Commissioning Engineer II position requires a high potential individual who will focus on nuclear island commissioning and plant operations related aspects of the Natrium Demonstration Plant being developed including scheduling, planning, and testing product development. The successful candidate will coordinate with engineers and project management professionals working on systems, components, engineering analysis, test planning, and scheduling in areas such as plant design, plant commissioning, and execution schedule development. The Commissioning Engineer II will work as part of a high-performing team of engineers, operators, and project managers. Responsibilities • Responsible for coordinating geographically diverse design and commissioning team members to develop supporting design and testing documentation. The team is composed of TerraPower employees, subcontracted resources, partner employees, and customers. • Develop and implement commissioning administrative programs and procedures. • Develop and coordinate the creation of an integrated nuclear plant commissioning schedule across multiple organizations. • Provide subject matter expertise to the project team regarding regulations, company policies, and industry best practices related to nuclear plant commissioning. • Develop, maintain, and refine plant level and system level requirements, specifications, and strategy documents related to commissioning, plant operations and maintenance activities over the lifecycle of a nuclear facility • Apply Engineering principles, methods, and tools to the design of nuclear and industrial facilities and its systems and operations. • Develop and implement plant operating strategies and human factors engineering attributes into the plant design. • Develop and lead commissioning and design efforts to evaluate plant integrated control and transient event responses and provide recommendations/optimizations to deliver efficient plant operational strategies to influence design. • Support design reviews and resolution of cross functional technical concerns as a Subject Matter Expert in nuclear island commissioning, operations and maintenance. • Ensure that licensing and code requirements are clearly established and implemented in the design, including development of regulatory submittal documents such as topical reports and safety analysis report sections. • Support teammates and contractors in the plant development efforts through oversight and interface activities. • Support development of design package for key topics, systems and plant features including coordination of calculations, design reports, mechanical drawings, and design specifications. • Support continuous learning and application of nuclear industry best practices to maintain the highest quality of engineering design and proactively identify process change/enhancement opportunities. • Support licensing activities associated with Safety Analysis Reports. • Provide leadership and oversight of nuclear island commissioning programs, processes, and procedures to ensure testing meets design criteria. Education • One year of satisfactory performance as a Level I in the corresponding inspection or test activity; or • High school (or equivalent) diploma plus 3 years of experience related to equivalent inspection or testing activities; or • Completion of college/university level work leading to an associate degree from an accredited institution (or equivalent) in a technical discipline plus 1 year of experience in equivalent inspection or testing activities; or • Completion of a 4-yr college degree from an accredited institution (or equivalent) in a technical discipline plus 6 months of experience in equivalent inspection or testing activities. Key Qualifications and Skills • Experience in developing and/or using nuclear plant commissioning administrative processes and procedures. • Experience in implementing integrated plant design of nuclear systems, including complex systems and structures highly desired but not required. • Experience developing and/or approving nuclear plant operations and maintenance procedures is preferred. • Previous experience related to EPC contracts preferred. • Experience using P6 Primavera or a similar application to develop long-term schedules is preferred. • Knowledge of the implementing requirements for and licensing basis criteria for nuclear work control, maintenance strategies, and operational programs. • Strong understanding of the nuclear regulations, plant work control processes, operational design philosophies, and integrated plant operations during normal and off-normal events. • Strong understanding of configuration management principles, as well as knowledge of design control tools application on nuclear or similar complex industrial applications. • Knowledge of Risk Informed methodologies for integrated plant design or similar probabilistic methods in design, desired but not required. • Excellent technical writing, communication, and presentation skills, including periodic training development and presentation. • Attention to detail and aspiration for technical excellence. • Candidate must be a high potential, self-starter and possess ability to coordinate and support a design team's effort with minimal direction. • Ability to handle projects that include many competing objectives and design constraints, with ability to resolve conflicts between objectives. • Ability to work on tasks that require a multi-disciplinary approach. • Experience working to quality standards NQA-1 or ISO 9001. • The successful candidate will possess a high degree of trust and integrity, communicate openly and display respect and a desire to foster teamwork. Job Functions Job Functions are physical actions and/or working conditions associated with the position. These functions may also constitute essential functions for the job which the employee must be able to fulfill, with or without accommodation. Information provided below is to help describe the job so that the applicant has a reasonable understanding of the job duties/expectations. An applicant's ability to perform and/or tolerate these actions and conditions will be discussed and workplace accommodations may be made on a case-by-case basis following an individualized assessment of the applicant and other considerations, including but not limited to any governing safety standards. • Motor Abilities: Sitting and/or standing for extended periods, bending/stooping, grasping/gripping, fine motor control (hands) • Physical exertion and/or requirements: Minimal, with ability to safely lift up to 20 pounds • Repetitive work: Prolonged • Special Senses: Visual and audio focused work • Work Conditions: Stairs, typing/keyboard, standard and/or sitting working environment of >8 hrs./day • Travel required: 0-5% TerraPower's technology is controlled for export by various agencies of the U.S. Government. TerraPower must evaluate applicants who are foreign nationals (other than asylees, refugees, or lawful permanent residents) in accordance with U.S. Government export control requirements. To facilitate TerraPower's export control reviews, you will be asked as part of the application process to identify whether you are a U.S. Citizen or national, asylee, refugee, or lawful permanent resident of the United States. Government export authorization approval times vary. Based on the business needs for a particular position, TerraPower may not consider a foreign national from a country if it is impracticable to obtain timely Government export approval. Please visit ****************** to apply Job details Salary Range 10: $105,216 - $175,360 Salary Range Level 11: $116,495 - $174,743 *We typically place offers in the lower to middle portion of the range to maintain internal equity and allow room for growth. Any salary offered within the posted salary band is based on market data and commensurate with the selected individual's qualifications experience. This range is specific to Kemmerer, WY. Benefits: • Competitive Compensation • Salary, eligible to participate in discretionary short-term incentive payments • Comprehensive Medical and Wellness Benefits for family or individual o Vision o Dental o Life o Life and Disability o Gender Affirmation Benefits o Parental Leave • 401k Plan • Generous Paid Time Off (PTO) o 21 days of annually accrued PTO • Generous Holiday Schedule o 10 paid holidays • Relocation Assistance • Professional and Educational Support Opportunities TerraPower Career and Benefits information: https://******************/contact-us/careers/

Primary purpose: We are looking for an early-career Electrical Engineer to join our Tallgrass Project Engineering team. This role offers hands-on exposure to power plant, pipeline systems, compressor stations, terminals, substations, and motor control centers supporting Major projects. Candidates with 0 to 5 years of experience will excel in this position by contributing to a diverse range of projects, from concept to execution. Minimum Requirements: Education: Bachelor's degree in Electrical engineering from an accredited institution in Engineering or a related field. 0 to 5 years of mechanical engineering experience (internships or co-ops in oil & gas are a plus) Familiarity with electrical equipment used in pipeline or terminal operations Working knowledge of CAD and engineering analysis tools (voltage drop, conduit fill, ohms law, and general electrical engineering calculations) Strong attention to detail, safety awareness, and a proactive mindset Ability to work in both office and field environments as needed Experience/Specific Knowledge (not required): Exposure to midstream project work or operations support Experience with pump or compressor station design Root cause analysis or mechanical integrity experience Certifications, Licenses & Registrations: Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers (for travel). Competencies, Skills & Abilities: Knowledge of basic Engineering principles Knowledge of the NEC/NFPA 70E This role will travel up to 80%. Works under direct supervision but displays initiative and moves toward requiring less supervision. Must be able to perform all essential and marginal functions of the job. Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules. Ability to successfully perform multiple tasks with strict deadlines. Ability to organize and prioritize daily work. Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience and skill sets of the successful candidate. (as applicable to job) Physical Demands: All the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential function of this job. Reasonable accommodations may be made for individuals with disabilities to perform the essential functions. Sitting; standing; walking or moving throughout facility; driving; talking; seeing (specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus); hearing; feeling; bending or stooping; squatting or crouching; reaching; kneeling; pushing; pulling; lifting up to 25 lbs. Minimal safety hazards; general office working conditions. Must be able to sit for prolonged periods of time. The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and hear. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Working Conditions: Required to carry a cell phone and be available to respond during working and non-working hours. The successful candidate will be required to clear a drug screen and a complete background check, including credit report for certain positions, after an offer has been extended and prior to being employed. Supervisory Responsibility: None. Preferred Education, Experience, Certifications, Competencies, Skills & Abilities: Above the minimum requirements, not required but advantageous in this position: ABC Other Responsibilities: The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned. Essential duties and responsibilities: Support the design, specification, and analysis of electrical systems, including substations, MW switchgear, LV Motor control centers, load analysis, and instrumentation that supports rotating equipment Assist in project execution, from feasibility and front-end engineering to construction support and commissioning Perform calculations, material selection, and electrical integrity assessments Work closely with project managers, field personnel, and vendors to ensure technical accuracy and safety compliance Participate in inspections, failure analysis, and reliability improvements of mechanical systems Prepare engineering deliverables such as datasheets, reports, and drawing reviews Follows prescribed procedures and conducts analyses to develop design options or recommendations Will work non-traditional hours as needed This role will be up to 80% travel

We are always looking forward to receiving resumes from candidates with skills and technical experience in the aerospace sector. We are very happy to receive speculative resumes if you are looking for a career change within the aerospace industry. Our flexible recruitment services will provide you with the following employment options: * Contract * Contract to Direct * Direct Our experienced consultants are experts in their field and are well placed to advise you on all aspects of aerospace recruitment opportunities, and employment trends.

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $63,795 to - $164,301 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0855 Electronics Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857056-0855-CYBER Control number 852987000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Use engineering manuals, standard publications, and technical material to obtain information and pertinent data for use by higher level engineers, contractors and/or customers. * Keep abreast of emerging technologies and professional developments to maintain currency in the field and for application to work assignments. * Perform duties in support of the installation, operations, and maintenance of weapon systems, subsystems, facilities, machinery, and/or support equipment. * Perform developmental assignments in the application of established principles, techniques, methods, and procedures of professional electronics engineering in the area of installation, operations, and maintenance. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: At least one year of specialized experience equivalent to at least the GS-09 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Modeling and simulation professional theories, concepts, principles, techniques, and practices of computer engineering, electronics engineering and/or computer science. GS-12: At least one year of specialized experience equivalent to at least the GS-11 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes: Leading and/or performing engineering work involving electronic circuits, circuit elements and equipment systems; applying a number of diverse electronics engineering practices, techniques and processes to identify and resolve complex engineering issues; supporting the planning, testing and troubleshooting of electronics engineering systems or devices; and, developing computer aided engineering analysis and tools in support of planning and designing applications. GS-13: At least one year of specialized experience equivalent to at least the GS-12 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Experience: Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-14: At least one year of specialized experience equivalent to at least the GS-13 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. GS-15: At least one year of specialized experience equivalent to at least the GS-14 level in the Federal service, which has equipped the applicant with the particular knowledge, skill, and abilities to successfully perform the duties of the position. Examples of this experience includes supporting the planning, execution, and instrumentation of electronics engineering tests; providing engineering support for tests, assessments, experiments and system evaluations; coordinating and directing the activities of engineers in the operation and maintenance of advanced hardware and facilities assessing the vulnerability of systems and subsystems; and developing analytical methods, tools, standards, and models and simulations used in electronics engineering and test planning. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of electronics engineering concepts, principles, methods, techniques, and standard engineering practices to perform moderately difficult or relatively limited phases of a larger and more complex installation, operations, and maintenance engineering project. * Knowledge of computer aided design and drafting (CADD) programs to perform design and drafting assignments, as well as other computer applications used in support of plans, analysis, and project reports. * Skill in applying the principles, concepts, and practices of the occupation sufficient to perform limited assignments in the field of electronics engineering. * Ability to communicate factual and procedural information clearly, orally and in writing. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

***************** is planning to bring a million developers and a billion users onchain. We need your help to make that happen. We believe that the onchain platform is the most important builder platform since the internet ("online"). We believe that the onchain platform should be open source, free to use, and globally available. And we believe that in order to make it really work, we need all hands on deck, working together to scale in a secure, decentralized, easy-to-use way. Base is incubated within Coinbase and plans to progressively decentralize in the years ahead. We believe that decentralization is critical to creating an open, global crypto economy that is accessible to everyone. Base is built on Optimism's open-source OP Stack. We're joining as the second Core Dev team working on the OP Stack to ensure it's a public good available to everyone; and contributing a portion of sequencer revenue to funding public goods. We are looking for a strong *Smart Contract Engineer* to join the Base team to help us continue scaling in order to pave the way for billions of people coming onchain. *What you'll do*: * Architect and build secure smart contract protocols and backend services to connect Coinbase users with the crypto ecosystem * Drive standardization in crypto protocols by designing and defining interfaces * Work closely with the Base leadership and product team to set our onchain strategy and roadmaps * Mentor and train other team members on smart contract engineering best practices *What we look for in you*: * 2+ year Experience with Solidity and smart contract development * 3+ year Experience with backend/client side development * Deep understanding of smart contract best practices and current industry patterns * Extensive experience with crypto (Ethereum, DeFi etc.) * Interest and passion for contributing to the crypto ecosystem * Interest and passion for building secure, robust, scalable infrastructure *Nice to haves*: * Experience with Go * Experience with zero-knowledge technology * Contributions to open source crypto projects * Crypto-forward experience, including familiarity with onchain activity such as interacting with Ethereum addresses, using ENS, and engaging with dApps or blockchain-based services. Job #: GBSCE05US *Answers to crypto-related questions may be used to evaluate your onchain experience *Pay Transparency Notice:* Depending on your work location, the target annual salary for this position can range as detailed below. Full time offers from Coinbase also include bonus eligibility**+ benefits (including medical, dental, vision and 401(k)). Pay Range: $186,065-$218,900 USD Please be advised that each candidate may submit a maximum of four applications within any 30-day period. We encourage you to carefully evaluate how your skills and interests align with Coinbase's roles before applying. Commitment to Equal Opportunity Coinbase is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, gender, national origin, age, disability, veteran status, sex, gender expression or identity, sexual orientation or any other basis protected by applicable law. Coinbase will also consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state and local law. For US applicants, you may view the *********************************************** in certain locations, as required by law. Coinbase is also committed to providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact us at accommodations*********************************** Global Data Privacy Notice for Job Candidates and Applicants Depending on your location, the General Data Protection Regulation (GDPR) and California Consumer Privacy Act (CCPA) may regulate the way we manage the data of job applicants. Our full notice outlining how data will be processed as part of the application procedure for applicable locations is available **************************************************************** AI Disclosure For select roles, Coinbase is piloting an AI tool based on machine learning technologies to conduct initial screening interviews to qualified applicants. The tool simulates realistic interview scenarios and engages in dynamic conversation. A human recruiter will review your interview responses, provided in the form of a voice recording and/or transcript, to assess them against the qualifications and characteristics outlined in the job description. For select roles, Coinbase is also piloting an AI interview intelligence platform to transcribe and summarize interview notes, allowing our interviewers to fully focus on you as the candidate. *The above pilots are for testing purposes and Coinbase will not use AI to make decisions impacting employment*. To request a reasonable accommodation due to disability, please contact accommodations[at]coinbase.com.

Job Description We are seeking an experienced Department Head - Electrical Engineer to provide leadership and oversight for electrical design projects within our firm. This role will report to the Office Manager and collaborate closely with Project Managers to ensure the successful design and implementation of electrical systems for various building projects. The ideal candidate will be a licensed Professional Engineer, passionate about mentoring junior staff and dedicated to delivering high-quality engineering solutions. Key Responsibilities Leadership & Team Management: Guide and mentor electrical design staff to enhance their technical skills and project knowledge. Collaborate with the Office Manager to assign staff to projects and manage workloads. Ensure quality control by reviewing all electrical project deliverables. Support staff development through performance assessments and training initiatives. Participate in client meetings and project interviews as a subject matter expert. Technical Expertise: Oversee the design of building electrical systems, including power distribution, lighting, data/telecommunications, and fire alarm systems. Conduct lighting calculations, circuit design, and layout of electrical switchgear. Ensure compliance with industry codes and standards, working closely with regulatory authorities. Lead system evaluations and feasibility studies to optimize electrical solutions. Project Oversight: Work with multi-disciplinary teams to coordinate electrical design efforts from concept through construction. Monitor project schedules and budgets to meet financial targets. Develop project proposals and fee structures in collaboration with management. Act as the primary point of contact for clients and stakeholders, ensuring their needs are met. Business Development: Identify opportunities for new services and contribute to business growth initiatives. Maintain relationships with clients and industry professionals to expand the firms reputation. Qualifications Professional Engineering (PE) license is required. Bachelor's degree in Electrical Engineering from an accredited institution. 10-15 years of progressive experience in electrical design, project engineering, or project management. Proficiency in electrical design software, such as Visual, Elum Tools, and MS Office. Familiarity with AutoCAD and Revit is a plus. Strong knowledge of electrical codes, standards, and industry best practices. Excellent communication, leadership, and organizational skills.

Department Head - Electrical Industry: Engineering Job Category: Engineering Status: Full-time Bonus: Yes Visa Support: Not Available Compensation: Base Salary - USD $90,000 to $130,000 (final amount to be discussed with the recruiter) Position Overview A reputable engineering firm is seeking an experienced Department Head - Electrical to lead and oversee electrical design projects. This role will collaborate closely with project managers and multidisciplinary teams to ensure the successful design and implementation of electrical systems across a range of building and infrastructure projects. The ideal candidate is a licensed Professional Engineer (PE) with a strong background in electrical system design, project leadership, and mentorship. This position is ideal for someone passionate about guiding teams, maintaining quality standards, and supporting the growth of both staff and the firm. Key Responsibilities Leadership & Team Management Mentor and guide electrical design staff to strengthen technical and professional development. Work with leadership to assign resources, manage workloads, and oversee project execution. Review and approve all electrical project deliverables to ensure quality and consistency. Conduct performance reviews and support employee training initiatives. Represent the electrical department in client meetings and project interviews. Technical Expertise Lead the design of building electrical systems including power distribution, lighting, telecommunications, and fire alarm systems. Perform lighting calculations, circuit layouts, and electrical equipment coordination. Ensure all designs meet relevant codes, standards, and safety regulations. Oversee system evaluations and feasibility studies to enhance design performance and cost efficiency. Project Oversight Coordinate with multidisciplinary teams throughout all project phases-from concept through construction. Track budgets, schedules, and deliverables to achieve project and financial objectives. Develop proposals, scopes, and fee structures in partnership with firm leadership. Serve as the primary contact for clients and stakeholders regarding electrical design. Business Development Contribute to business growth by identifying new service opportunities and strengthening client relationships. Support marketing and proposal efforts to expand the firm's reach and reputation. Qualifications Professional Engineering (PE) license required. Bachelor's degree in Electrical Engineering from an accredited institution. 10-15 years of progressive experience in electrical design, project engineering, or project management. Proficiency in electrical design software such as Visual, ElumTools, and Microsoft Office. Familiarity with AutoCAD and Revit is preferred. Deep understanding of electrical codes, industry standards, and best practices. Strong leadership, communication, and organizational abilities. Skills and Certifications Required: Professional Engineering (PE) license Bachelor's degree in Electrical Engineering Proficiency in electrical design software Preferred: Familiarity with AutoCAD and Revit

**About the Role:** We are looking for a talented, curious, and highly motivated Staff Conversational AI Designer to join our Voice & Sound team. The ideal candidate will breathe design and have deep expertise in Voice and Multimodal interfaces. You will join a team of experts working on end-to-end multimodal customer experiences, driving innovation in the rapidly evolving and expanding high-tech world of AI through user-centric practices and design. In this role, you will lead with vision and collaborate with other designers, researchers, technologists, and product stakeholders to craft effective and exceptional experiences through data-driven design. **Responsibilities:** + Lead design vision and execution for AI-based conversational and multimodal experiences, advocating usability and user-centered design principles. + Develop and promote conversation design best practice standards, reusable interactional patterns, and processes. + Deliver effective design documentation to communicate experience requirements, design principles, best practices, prototypes, and multimodal flows to convey voice forward interactions that leverage AI. + Identify opportunities for usability testing and research efforts by leading and supporting the creation of prototypes, participating in clinic sessions, analyzing, brainstorming, ideating etc. + Build strong relationships with internal stakeholders to understand priorities, collaborate on actions to implement product and service solutions, and ensure a connected end-to-end user experience. + Identify, track, and monitor industry/experience trends and drivers of customer needs and satisfaction. + Lead visualization of experiences using storyboards, customer journeys, user flows, low-fidelity wireframes and voice prototypes to illustrate vision and influence impactful experiences in AI + Balance user needs, technical constraints, and product objectives to solve problems effectively, crafting world-class multimodal user experiences. **Requirements:** + 9 + years creating conversational design experiences. + Ability to combine vision with strong creative design execution. + Strong portfolio with work samples showcasing expertise, craft, aesthetics, and depth of thought. + Experience designing for Generative or Agentive AI-powered experiences + Understanding of machine learning & natural language processing (NLP) fundamentals. + Experience incorporating research into the design process. + Subjet-matter expert. Ability to work independently, be organized, self-motivated, and have attention to detail. + Excellent written, visual, and verbal communication skills. + Proficient in common design tools (e.g.Figma, VoiceFlow, ProtoPie, etc). + Demonstrated experience documenting for **voice-only, voice-forward, and multi-modal** experiences + **Demonstrated experience** **creating interactive** prototypes formultimodal experiences (voice, sound, visuals, touch, chat, etc) **Preferred** **Qualifications:** + Deep understanding of Generative AI for Conversational Experiences, foundational elements of Conversation Design, and LLMs. + Ability to communicate technical concepts to a non-technical audience (verbal and written). + Ability to work effectively within an environment that leverages robust design systems and libraries, while seeking to delight and impress users with innovative concepts and experiences. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

←Back to all jobs at Upstream Data Inc Electrical Technician About Us: Upstream Data US Inc. is the newest expansion of Upstream Data, a Canadian-founded company recognized for innovation in the energy sector. Building on years of expertise in manufacturing, we have expanded into the United States to meet growing demand and to better serve our customers. The launch of Upstream Data US Inc. marks an exciting new chapter in our growth. While we bring with us the proven processes, craftsmanship, and strong culture built in Canada, we are also building a dynamic local team to shape the future of our U.S. operations. This is an opportunity to join a company with a solid foundation and a start-up spirit where your ideas and contributions will directly impact our success. Position Summary: The Electrical Technician supports the day-to-day operations of the electrical department by assisting electricians and shop staff with the preparation, assembly, and maintenance of electrical components and systems. This position plays a key role in maintaining a clean, organized, and safe work environment while contributing to the efficient production and service of electrical equipment. Responsibilities include, but are not limited to: Wiring Support: Assist electricians with cutting, stripping, pulling, and labeling wire; lay out and prep electrical harnesses and cable assemblies. Panel Assembly: Help install breakers, relays, terminal blocks, and other components into electrical panels under supervision. Parts Prep & Inventory: Organize and prepare electrical parts, hardware, and tools for active jobs; restock bins and assist with inventory counts. Testing & Inspection Prep: Support basic continuity checks and equipment staging under direction; assist with labeling, tagging, and documentation. Material Handling: Move wire spools, enclosures, conduit, and other materials using carts, dollies, or forklifts where trained. Shop Maintenance: Keep the electrical shop clean and organized by sweeping floors, removing waste, cleaning tools, and maintaining workstations. Tool Maintenance: Clean and inspect tools after use; store appropriately and report damaged or missing tools to the electrical lead. Safety & PPE Compliance: Follow all safety protocols including lockout/tagout procedures and use of PPE; report hazards promptly. Other duties as assigned to support electricians, manufacturing teams, and overall shop operations. Working Conditions: Work is performed in an industrial shop environment, with exposure to engine fluids, dust, noise, and high-powered equipment. Some outdoor work or exposure to cold/hot environments may be required. Must wear all required personal protective equipment (PPE), including safety glasses, boots, gloves, and hearing protection as necessary. Qualifications: High school diploma or equivalent. Basic understanding of hand tools and power tools; familiarity with electrical tools is an asset. Able to lift 50+ lbs and perform physically demanding tasks for extended periods. Willingness to learn and follow detailed instructions in a fast-paced environment. Safety-focused with a strong work ethic and attention to detail. Valid driver's license and reliable transportation preferred. Please visit our careers page to see more job opportunities.

Arizona - Remote; Arkansas - Remote; Fayetteville, AR; Florida - Remote; Fort Worth, TX; Georgia - Remote; Idaho - Remote; Illinois - Remote; Indiana - Remote; Iowa - Remote; Kansas - Remote; Kentucky - Remote; Louisiana - Remote; Michigan - Remote; Minnesota - Remote; Mississippi - Remote; Missouri - Remote; Montana - Remote; Nebraska - Remote; Nevada - Remote; New Mexico - Remote; North Carolina - Remote; North Dakota - Remote; North Kansas City, MO; Ohio - Remote; Oklahoma - Remote; Omaha, NE; Pennsylvania - Remote; South Carolina - Remote; South Dakota - Remote; Tennessee - Remote; Texas - Remote; Utah - Remote; Virginia - Remote; West Virginia - Remote; Wisconsin - Remote; Wyoming - Remote **Company Description** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Olsson is seeking an Electrical Instrumentation Engineer for our Data Center Facilities Engineering Design team to help support the design development of the instrumentation and control systems associated with electrical distribution systems. The Electrical Instrumentation Engineer will provide technical leadership and expertise with respect to system modernization and maintenance, will create plans, schematics, and one-lines, and will lead and support small and large instrumentation and controls projects with a focus on reliability and technical execution. **Primary Responsibilities** + Support instrumentation-related threat mitigation action plans and incident management investigations and actions + Ensure the smooth real-time operation of the instrumentation system by performing and analyzing technical studies and data, developing strategies and alternatives, and establishing and documenting operating procedures + Works within a multi-discipline team to develop efficient and reliable electrical design packages for low and medium voltage electrical infrastructure + Lead the Instrumentation and Control design for projects and define control scheme in alignment with industry and client standards to satisfy power system reliability requirements + Review data sheets, control block diagrams, and functional/ operational descriptions for all instrumentation related projects + Provide technical leadership and serves as a subject matter expert, delivering professional and technical guidance on programs, projects and initiatives. + Mentor and support team members, offering guidance and encouraging initiative while helping them develop as engineers and technical leaders. **Required Qualifications** + Bachelor's degree in Electrical Engineering, or Instrumentation and Control Engineering + **7+ years' experience** in instrumentation and control systems **within the industrial electrical and/or hyperscale data center sector** + Expertise in the design, application, and implementation of distribution and generation instrumentation and control systems for building level infrastructures + Ability to demonstrate a thorough understanding of the industry standards that governs the selection, testing and performance of instrumentation sensors and control schemes + Ability to demonstrate a thorough understanding of global standards such as ISA, IEC, IEEE and other related to instrumentation and control systems + **Experience working with DCS, SIS and PLC** s and developing, reading and understanding P&IDs and control schematics **Preferred Qualifications:** + License Professional Engineer (P.E.) \#LI-DD1 #Remote **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Mortenson is currently seeking an experienced Project Engineer II with the ability to interact with a variety of staff at all levels in an ever-changing environment, remaining flexible, resourceful, proactive, and efficient with a high level of professionalism and confidentiality. The Project Engineer will review, provide analysis, management, and resolution of field coordination issues with project team members and participants. Location: Initial Project in Wyoming RESPONSIBILITIES * Interpret project plans, specifications, and details for subcontractors and craft persons * Implement the pre-construction quality plan and manage testing and inspection processes * Obtain and maintain construction permits; manage fee payments and recurring expenses * Develop and maintain Material Tracking List, Project Test and Inspection Listing, Concrete Placement Log, and Non-Conformance Report * Manage, create, and distribute contract documents; establish handling procedures for electronic documents (RFIs, correspondence) * Manage submittals: set up register, obtain customer/architect approval, prepare transmittal forms, coordinate packaging, review, and processing * Expedite submittals to align with project schedule; communicate submittal process details to subcontractors and suppliers * Incorporate processes and procedures for project closeout phase; define and implement procedures for posting revisions and updates to as-built construction documents * Mentor, manage, and evaluate field engineers; determine alternative work methods as needed * Coordinate safety and compliance for all team members; maintain schedule of timelines and ensure completion QUALIFICATIONS * Bachelor's degree in Construction, Civil, or Architectural Engineering or Construction Management * Minimum of three years related construction experience * Detail orientation sufficient to organize and effectively manage multiple tasks * Possess basic understanding of construction law and generally accepted business practices * Strong teamwork orientation, initiative, communication, and problem-solving skills * Proven positive and professional attitude and customer service skills * Current driver's license A few benefits offered include: (for Non-Craft & Non-Union Craft working 25+ hours / week) * Medical and prescription drug plans that includes no additional cost vision coverage * Dental plan * 401k retirement plan with a generous Mortenson match * Paid time off, holidays, and other paid leaves * Employer paid Life, AD&D, and disability insurance * No-Cost mental health tool and concierge with extensive work-life resources * Tuition reimbursement * Adoption Assistance * Gym Membership Discount Program The base pay range for this role is $91,100 MIN - $123,000 MAX (Actual range is higher for the following office locations: Denver, CO and Chicago, IL - 5%, Seattle, WA, and Portland, OR - 10%, Washington, D.C. - 12.5%). Base pay is positioned within the range based on several factors including an individual's knowledge, skills, and experience, with consideration given to internal equity. This position is eligible for Mortenson's incentive plan. #LI-AP1 Visa sponsorship is not offered for this position. Our postings are typically open a minimum of 5 days and an average of 44 days. ABOUT MORTENSON As a top builder, developer, and EPC (Engineering, Procurement, and Construction), our expertise spans markets like sports, renewable energy, data centers, healthcare, and more. We are builders at heart, working to ensure the built environment has a lasting positive impact. Let's Redefine Possible Equal Employment Opportunity Your uniqueness brings new and creative perspectives to the team. Mortenson is committed to providing equal opportunities of employment (EOE) to all individuals, regardless of your race, religion, gender, national origin, age, veteran status, disability, marital status or any other legally protected category. * Mortenson reserves the right to hire any individual without legal or financial obligation on unwanted solicitations. No agency emails, calls, or solicitations are accepted without a valid agreement. * * Must be currently legally authorized to work in the U.S. without sponsorship for employment visa status (e.g., H1B status, 0-1, TN, CPT, OPT, etc.). We are unable to sponsor or take over sponsorship of an employment Visa at this time.

At DistributionNOW, we believe our associates are the best in the business. We value and reward hardworking, creative, and dedicated employees that desire to be part of a team committed to outstanding customer service. START YOUR CAREER NOW. We are seeking a detail-oriented and motivated Electrical Engineer Intern for the summer. This internship offers hands-on experience in electrical design and integration, with exposure to UL Panel Shop work, electrical automation/programming, electrical engineering, and electrical systems integration. The ideal candidate is a proactive problem-solver with a passion for engineering and innovation in industrial automation. Key Responsibilities: Assist with the design and assembly of electrical control panels in compliance with UL standards Support the development and programming of automation systems (e.g., PLCs, HMIs) Participate in testing, troubleshooting, and debugging electrical systems and components Collaborate with engineering staff on electrical design documentation and schematics Help integrate electrical components into larger mechanical or automation systems Contribute to project planning, installation support, and continuous improvement efforts Qualifications: Currently pursuing a degree in Electrical Engineering or a related field Basic understanding of electrical circuits, control systems, and automation technologies Familiarity with AutoCAD Electrical, PLC programming, or related software is a plus Strong attention to detail and willingness to learn Excellent communication and teamwork skills