Electrical test engineer jobs near me - 796 jobs

We are seeking a highly skilled and experienced Senior Electrical Engineer with a focus on Power and Controls. The ideal candidate will have a strong background in electrical engineering, with at least 10 years of experience and a Professional Engineer (PE) license. This role involves designing, developing, and implementing power systems and control solutions that enhance operational efficiency and safety. Key Responsibilities: Design and develop electrical power systems, including high and low voltage equipment. Analyze and optimize power distribution systems and controls to meet performance specifications. Collaborate with cross-functional teams to integrate electrical systems into larger projects. Conduct feasibility studies, risk assessments, and technical evaluations for electrical designs. Lead projects from conception through execution, ensuring compliance with industry standards and regulations. Prepare and review technical documentation, including specifications, reports, and schematics. Provide mentorship and guidance to junior engineers and technical staff. Stay updated on industry trends, technologies, and best practices to drive innovation. Troubleshoot and resolve electrical issues in existing systems and propose solutions for enhancements. Qualifications: Bachelor's degree in Electrical Engineering or a related field (Master's degree preferred). Professional Engineer (PE) license is required. Minimum of 10 years of experience in electrical engineering, with a focus on power systems and controls. Proficient in electrical design software (e.g., AutoCAD, ETAP, or similar). Strong understanding of industry standards (IEEE, NEC, etc.) and safety regulations. Experience with project management methodologies and tools. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills, with the ability to collaborate effectively with diverse teams.

Job Title: PCB Designer - REMOTE Onsite Requirements: Strong Xpedition / Mentor Graphics PCB Layout Expertise Experience Designing Complex Multilayer HDI Boards (Preferably for Military/Aerospace) Ability to Work from Engineering Inputs & Deliver Full, Accurate PCB Documentation Job Description: Client Systems has an immediate opening for a Contract Printed Circuit Board Designer. A Contract Printed Circuit Board Designer assists engineers in the design and development of complex, detailed layouts of printed circuit boards used in airborne and other demanding environments. In this position, the Contract Printed Circuit Board Designer will be responsible for creating multilayer high-density printed circuit board designs using Mentor Graphics tools (Xpedition PCB Layout, Autorouter, Drawing Editor, DMS, etc.) per Electrical and Mechanical Engineering input in a highly structured development environment. The fabrication drawing package will be created per IPC and/or MIL specifications. Responsibilities: You will perform detailed layout design and documentation of printed circuit boards under the direction of electrical and mechanical engineers. You will work from schematics, net lists, part lists, and basic description of the board function, constraints, configuration, and arrangement as defined by electrical and mechanical engineers. You will check drawings against the project input for correctness and conformance to standard engineering drafting practices and standards. You will create electronic library symbols, geometry, footprints, etc. You will work with system management including file maintenance, backup and storage, and other tool improvements. Knowledge Skills and Abilities: Ideal candidates demonstrate a passion for innovation and a strong sense of ownership. The candidate has experience designing high-count multilayer complex printed circuit boards. Is well versed in MIL and IPC Standards. Is familiar with the current Siemens/Mentor Graphics tools: Xpedition Design and Layout PCB, Valor (artwork checking tool), Constraint Editor/Constraint Manager (CES), Drawing Editor. **This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role**

ATV / Motorsport Test Technician - Raymond, OH Support Research Team with communication, coordination, planning, and instrumentation of data equipment to customer vehicles. Installing data equipment onto customer vehicles, with the ability to troubleshoot as needed. Communicating with customers: Email and phone calls, to establish interest and availability. Coordinating visits with customers to install data equipment. Aligning multiple customers for one trip. Create trip itineraries to booking flights, hotels, rental cars, and arranging all logistics for customer visits. Additional: Ride/drive ATVs and SxSs at closed test courses and public/private areas. Perform vehicle testing per outlined test procedures and requirements. Assemble and disassemble complete vehicles using engineering drawings, service manuals, and communicate with engineering staff. Perform vehicle maintenance/inspections/basic diagnostics. Be attentive to detail during testing and identify concerns/problems as they arise. Communicate/document concerns with project leaders, utilizing a high level of detail and a clear understanding of the situation/problem. Perform vehicle tear down for part confirmation and sub-component section evaluations. Maintain a clean, organized, and safe working environment.

Electrical Design Engineer (MEP) Houston, Texas $90,000 - $110,000 + Training + Career Progression + Support to Gain PE License + Bonus + Fantastic Benefits + Tuition Reimbursement + Work-From-Home Fridays! Are you an electrical engineer looking to work on exciting commercial MEP projects, with excellent training and a clear progression pathway to becoming a PE? This is an excellent opportunity to be the go-to electrical engineer on various technical construction projects, with the chance to progress into a Project Management position and gain your PE license. This growing company specializes in designing MEP systems for commercial projects. Due to their long-term expansion plans, they are looking for an Electrical Engineer to serve as a technical expert on diverse projects. They will also fund your PE license, granting you the opportunity to further advance your career. In this role, you will be based in the office, where you will be responsible for designing construction documents, producing electrical schematics and drawings, handling RFI documents, and liaising with clients and architects to meet project requirements. This is a great opportunity for an electrical engineer who wants to obtain their PE license and advance within a company that actively invests in its employees while working on technically challenging commercial projects. The Role: Serve as the technical expert for MEP systems in commercial projects Design electrical systems, liaise with site staff, and conduct site visits Office-based The Person: Electrical Engineer Degree in a relevant field Aspires to become a Professional Engineer

Job Title: Test Technician 12 months+ Contract Must assess product evaluation against NEC and UL/CSA standards. Review order write-ups, operate components, ensure product quality, work with other areas to ensure quality, and verify units to meet agency approvals. · Performs experience testing and troubleshoots power conversion equipment prior to shipment. · Conducts test following specific test procedures by using measuring instruments and computer test programs · Documents test results with appropriate information in a complete manner · Uses measuring instruments, assorted related tools, and computer test program accurately. Work with Test and Manufacturing Engineers on test equipment development. Coordinate the development and modifications of test work instructions. · Reads and interprets specific test procedures to properly perform and document test results · Performs tests to measure strength, durability and maintainability as required · Collects test data and prepares reports detailing results · Installs, diagnoses, services and repairs electrical equipment prior to shipment of finished product. Configure and connect system equipment (switchgear, SCCT cabinets, and power ties), and perform preliminary inspection and tests. · Applies knowledge and ability to use hand tools and operate test equipment according to established procedures · Reads and understands wiring diagrams to trace electrical circuits and ensure proper operation according to engineered specifications. Makes repairs as needed in circuitry. · Examines electrical equipment during operating cycles to detect excess vibration, overheating, fluid leaks, and loose, noisy or non-functioning parts. Repairs any problems found to be non-conforming to engineered specification · Replaces defective parts · Performs other “fixes” found to ensure the unit is operational at time of shipment Skills: · Beginning level of computer skills with knowledge of MS office products such as Word and Excel · Ability to read and comprehend simple instructions, write short correspondence and effectively present information to others in English · Should be knowledgeable in the use of the following equipment: hypot tester, multi meters, wave and power analyzer, and oscilloscope. · Must be able to read electrical and mechanical blueprints. Education: · Associate's degree in electrical/mechanical engineering OR · Equivalent training from two-year technical school with emphasis in electrical applications OR · Combined knowledge and experience to equal two years

We are now looking for a Datacenter Product Engineer! NVIDIA Corporation is a world leader in visual computing technology. The GPU, which the company invented, serves as the visual cortex of modern computers and is at the heart of their products and services. NVIDIA has transformed into a specialized platform company that targets four large markets - Gaming, Professional Visualization, Datacenter and Automotive - where visual computing is essential and deeply valued. Their work also uncovers new universes to explore and enable outstanding creativity and discovery by powering what was once thought to be science fiction inventions like artificial intelligence and autonomous cars. Collaborating with your peers across various engineering groups, you will optimally launch new systems for NVIDIA HGX GPU Accelerated Server Platforms to production. These purpose-built systems are optimized for the growing Deep Learning, Artificial Intelligence, and Analytics environments. With world-class technology enabling never-been-seen-before performance levels, NVIDIA's HGX portfolio is arguably the most complicated systems platform ever developed by humans. This product family represents the company's fastest growing line of business as well as its largest total available market opportunity. You will bring to bear your knowledge of system architectures and GPU technology in order to productize new GPU boards for datacenter architectures with GPU-accelerated clusters. Your responsibilities will include planning and establishing processes, defining test requirements and optimizing the production line to deliver new GPU boards. You will also be instrumental in helping the team to achieve the desired cost and quality metrics considered outstanding. This position will be based out of Houston, Texas. What you will be doing: Use your in-depth experience with high speed networks and signals to plan and develop new diagnostic tests and debug procedures for next gen products Use your knowledge of system power-up and handshakes during boot to debug complex interactions between HW, FW and SW on faulty boards Recommend, drive and ensure compliance to DFx requirements for robust signal integrity performance as related to layout, mechanical components, assembly procedures, etc. Develop and deliver test specs for system level manufacturing screens for all new products to meet the required HW coverage, quality and product requirements. We collaborate with CM to define product assembly line, number of test stations and number of assembly fixtures, optimized for cost and efficiency. Craft creative solutions and WARs through volume data analysis and lab experimentation to solve meaningful yield and test problems. We lead optimization and continuous improvement efforts on the production screen spec definition processes to minimize waste and meet test time, yield, DPPM requirements. Support customer facing and quality teams during partner concerns to understand the issue and fix gaps identified in coverage. What we need to see: BS or MS degree in EE/CE or equivalent experience. 5+ years of meaningful industry experience. Strong EE fundamentals, knowledgeable in digital design, signal integrity, statistics, timing analysis, fault analysis, sampling and computer architecture. Ways to stand out from the crowd: Prior board/system level electrical design experience. Experience with Perl, C/C++, Windows, and Linux. Your base salary will be determined based on your location, experience, and the pay of employees in similar positions. The base salary range is 108,000 USD - 178,250 USD for Level 3, and 136,000 USD - 212,750 USD for Level 4. You will also be eligible for equity and benefits. Applications for this job will be accepted at least until December 21, 2025.NVIDIA is committed to fostering a diverse work environment and proud to be an equal opportunity employer. As we highly value diversity in our current and future employees, we do not discriminate (including in our hiring and promotion practices) on the basis of race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other characteristic protected by law.

Job Description About the Role We are seeking experienced Protection & Control (P&C) Field Testing and Commissioning Engineers to join our clients team. This role supports high-voltage substation projects across transmission, distribution, and generation environments. It is a travel-intensive field position requiring hands-on expertise in testing, commissioning, troubleshooting, and documenting critical protection systems. Key Responsibilities Perform testing and commissioning of P&C systems in high-voltage substations Conduct protective relay testing using Omicron CMC 256/356 or Doble F6150 equipment Test relays such as SEL-311L, SEL-387, SEL-487, SEL-421, SEL-351S, GE L90, GE D60, and related models Execute control scheme testing, CT/PT circuit verification, relay calibration, and static/dynamic testing Collaborate with Project Leads and Field Supervisors on active assignments Complete Job Hazard Analysis (JHA) and ensure compliance with all safety protocols Interpret electrical drawings, schematics, and logic diagrams accurately Record test data and prepare detailed field reports Handle administrative tasks including timecards, expenses, and project documentation Qualifications & Experience Minimum 5 years of electrical field testing experience in substations (breakers, transformers, and related systems) Strong proficiency with SEL, GE, Basler, and Beckwith relay families Skilled in relay testing using Omicron or Doble test sets Familiarity with NETA, IEEE, NFPA, and other industry standards Hands-on experience across voltage ranges from 15 kV to 500 kV Proficiency with testing software such as ProTesT, Protection Suite, ENOSERV RTS, Omicron Test Universe, AcSELerator

Waabi, founded by AI pioneer and visionary Raquel Urtasun, is an AI company building the next generation of self-driving technology. With a world class team and an innovative approach that unleashes the power of AI to “drive” safely in the real world, Waabi is bringing the promise of self-driving closer to commercialization than ever before. Waabi is backed by best-in-class investors across the technology, logistics and the Canadian innovation ecosystem. With offices in Toronto, San Francisco, Dallas, and Pittsburgh, Waabi is growing quickly and looking for diverse, innovative and collaborative candidates who want to impact the world in a positive way. To learn more visit: ************ Application Instructions:- To be considered for an internship/co-op, please add your most up to date academic transcripts alongside your resume for further review.- The Summer Internship is expected to start May/June 2026 and continue on a full-time basis (40 hours/week) on-site to August/September 2026 with the potential to extend to the end December 2026.- This role requires a successful candidate to be on-site at our San Francisco office. You will...- Own board bringup and automated board testing.- Collaborate with the design team to prepare test plans based on design requirements and specifications.- Ensure all key functions and edge cases are covered in the test plan.- Write, debug, and optimize test scripts for automated board testing.- Coordinate with software team to ensure seamless integration and operation.- Use tools such as oscilloscopes, multimeters, and logic analyzers for troubleshooting.- Perform root cause analysis and work collaboratively with the team to resolve them.- Maintain detailed documentation of test findings and resolved issues. Qualifications:- Pursuing Bachelors or MS/PhD in Electrical Engineering or related field.- Prior experience or coursework related to microelectronics.- Familiar with I2C, SPI, UART, USB, and Ethernet interface design.- Proficient with lab tools such as bench power supplies, multimeter, oscilloscope, logic analyzer, and soldering station.- Strong background in EE fundamentals - Analog and Digital circuits.- Familiar with EE CAD tools - Altium, or CAD, etc.- Familiar with scripting languages; Python preferred.- Strong analytical and problem solving skills.- Excellent written and verbal communication skills.The US yearly hourly range for this role is: $35 - $44 USD/hr in addition to competitive perks. Waabi (US) Inc.'s yearly salary ranges are determined based on several factors in accordance with the Company's compensation practices. The hourly base range is reflective of the minimum and maximum target for new hire salaries for the position across all US locations. Perks/Benefits:Waabi provides a competitive benefits package that includes:- Competitive compensation and equity awards.- Premium choices for Health and Wellness benefits that include Medical, Vision and Dental coverage.- Unlimited Vacation.- Flexible hours and Work from Home support.- Daily drinks, snacks and catered meals (when in office).- Regularly scheduled team building activities and social events.- As we grow, this list continues to evolve! Waabi is a technology start-up building technologies to transform the way the world moves. Join our talented team to be a part of the future and to make an impact! Waabi is an equal opportunity employer. We celebrate diversity and are committed to creating a supportive, inclusive, and accessible workplace for all our employees. We seek applicants of all backgrounds and identities, across race, color, ethnicity, national origin or ancestry, age, citizenship, religion, sex, sexual orientation, gender identity or expression, military or veteran status, marital status, pregnancy or parental status, caregiver status, disability, or any other characteristic protected by law. We make workplace accommodations for qualified individuals with disabilities as required by applicable law. If reasonable accommodation is needed to participate in the job application or interview process please let our recruiting team know.

ms consultants, inc. Columbus, OH ms consultants is seeking a MEP Engineer to support our dynamic and growing Business Systems Business Unit in our Columbus office. Working at ms consultants provides a unique working environment due to its highly diverse project portfolio and talented personnel. We offer an all-in-house multidisciplinary team of architects, interior designers, MEP engineers, and structural engineers that gives our talented staff exposure to unique perspectives, approaches, and ideas that enhance a well-rounded career development experience. The primary focus of the role will be construction document design and production, working with a team of drafters, engineers, and project managers. The job requires the individual to take responsibility of the technical content of building projects and manage the project tasks with assistance from the Technical Service Manager. About the Building Systems Business Unit Our Building Systems Business Unit provides architecture, engineering, and planning consulting services to a variety of commercial and public clients including financial, retail, restaurant, office, municipal and grocery. Project types range from multi-unit retail to schools, municipal facilities, fairgrounds, industrial sites, and urban redevelopment. What You'll Do: We are looking for someone who is a creative problem solver, willing and able to communicate design ideas and learn office production workflow in a collaborative, matrixed team environment. Specific responsibilities include Plan production for commercial facilities within multiple industries utilizing AutoCAD and Revit software. Complete preliminary calculations to support design decisions within HVAC, ventilation, plumbing and water supply systems. Coordinate of design elements with other in-house disciplines, including architecture, structures, site civil, and landscape design. Candidates should have a desire to learn all aspects of MEP engineering, if not already exposed to all of the elements above. What You'll Bring: Education and Experience BSCE from an ABET-accredited college of university, or equivalent experience. Experience performing technical projects production Knowledge and Skills Working knowledge of HVAC, plumbing, energy modeling, power distribution, lighting, fire alarm, and fire suppression design. Proficiency using computer software and programs such as Civil3D, AutoCAD, Revit, and Microsoft Word, Excel, and Outlook. Practical familiarity with ICC, NEC, and NFPA building codes and LEED building standards. Why Choose ms consultants? We are proud to be an award-winning engineering, architecture, planning and environmental consulting firm, annually ranking within ENR's Top 500 Design Firms. We partner with a variety of public and private clients and take pride in the many relationships we have formed by providing quality design solutions since 1963. We are dedicated to helping these clients achieve their goals through integrated, innovative solutions, and outstanding customer service. As a member of the ms team, we consider your needs as a professional and as an individual outside of work. We offer a career path which provides opportunities for advancement at any level of your career and costs for licensure, certifications, and further education. We offer a robust benefits package with options for health coverage, in addition to life insurance, disability, long-term care, and more. Our comprehensive 401(k) plan with company matching contributions sets you up for the future, from hire to retire. Wherever you are in your personal and professional journey, ms has you covered. We know work-life balance is important and offer paid time off and flexible work schedules for when you need it, in addition to company paid holiday. As you grow in your career and gain experience, opportunities may be available for a hybrid schedule. Our Mission: By investing in our people, we create comprehensive solutions for communities and clients. Our Vision: Our vision is to shape a better tomorrow. Our Values: We are accountable. We foster collaboration. We stand for inclusion. We are committed to excellence. We are passionate about our work The ms Commitment to Diversity, Equity, & Inclusion ms is a company that actively promotes anti-racist values and fosters an environment of diversity, equity, and inclusion. This means working together to speak out and take action against all forms of racism, bias, and discrimination, not only in our company but in our community and everyday lives. Read more about ms DEI here. ms consultants, inc. is an Equal Opportunity/Affirmative Action employer. ms fully supports and maintains compliance with all state, federal, and local regulations. ms does not discriminate against applicants or employees on the basis of race, color, religion, sex (including gender identity, sexual orientation, and pregnancy), national origin, age (40 or older), disability, or genetic information.

Commonwealth is an ENR Top 500 engineering and consulting firm that specializes in delivering innovative design and planning solutions in the fields of power generation, substations, transmission & distribution, renewable energy integration, environmental permitting, and right-of-way services. With 35 years of industry experience, we are an EC&M Top 20 Electrical Design Firm that delivers exceptional services across the US. We believe in creating a well-balanced work environment that inspires connectivity, creativity, and innovation. We are committed to creating an inclusive workplace where all employees feel respected, valued, and empowered. We have a persistent vision to influence the secure energy future through diverse, innovative, and sustainable solutions with our partners. Job Responsibilities: Design and develop substation drawings for power transmission and distribution systems Develop, prepare, and modify substation drawings, including A/C diagrams, D/C schematics, and logic and functional diagrams Enrichment opportunities with other departments Other work, as assigned Qualifications: The candidate must be currently enrolled in an accredited Electrical Engineer program. This is an excellent opportunity for an individual with appropriate education, ambition, and a desire to grow professionally. The successful candidate must be eligible to work in the United States.

WHO WE ARE Michael Baker International is a leading provider of architectural, engineering and consulting services, including design, planning, environmental, construction and program management. The company provides its comprehensive range of services and solutions to support U.S. federal, state, and municipal governments, foreign allied governments, and a wide range of commercial clients. Michael Baker's more than 4,000 employees across 85 locations are committed to a culture of innovation, collaboration, and technological advancement to help solve challenges for clients and communities throughout the country. DESCRIPTION Michael Baker International is seeking a Full-Time (40 hours/week) Summer 2026 Electrical Engineering Intern student to support our electrical and lighting design services on a wide variety of transportation related projects. The selected hire will have the option to work remotely. In this internship, you will become part of Michael Baker International's Transportation Department which includes highway, aviation, electrical, and traffic engineers. Our Pittsburgh staff also supports other offices throughout the country with specialized transportation engineering design services. The successful candidate will be an enthusiastic, motivated, self-starter, with responsibilities that include production, design, and documentation for a broad range of project types. With a current focus on growing Design/Build, Federal, and Interstate project opportunities, along with market-driven diversification including Rail/Transit, Highway Interchange, and Bridges/Tunnels. You will work in multi-disciplinary, collaborative project design teams with Civil Engineers, Architects, and Systems Engineers. The intern must demonstrate creative problem-solving, initiative to learn new concepts, organizational skills, an ability to work in a team environment with licensed electrical and civil engineers, and a basic understanding of construction documents and constructability. You will also assist Electrical Engineers with the development of electrical system designs including but not limited to interior and exterior lighting; circuiting; schedules; calculations; sizing of electrical equipment, conduit, wiring, generators, and transformers, etc. RESPONSIBILITIES Assist with the preparation of designs, design calculations, producing BIM models and construction drawings for electrical transportation-related projects for a variety of clients Work closely with engineers and designers to complete design and/or analysis of the lighting needs on roadways, railways, trails, sidewalks and other transportation infrastructure projects Research/investigate solutions and report findings Assist in preparation of quantity calculations and construction cost estimates Use design software to electronically apply engineering fundamentals in construction plan set preparation Learn and understand the activities involved in assembling Electrical transportation project contract document You may also assist other departments within the office on an as-needed basis. PROFESSIONAL REQUIREMENTS Currently enrolled in and pursuing an Associates Degree in Drafting or a Bachelor's Degree in Electrical Engineering at an accredited University or College; minimum of 2 years of coursework completed is desired. College level engineering course in Electrical Engineering is a plus Proficiency with Microsoft Office Suite Strong written and verbal communication skills Experience with CAD software is a plus COMPENSATION The approximate compensation range for this position is $18 - $22 per hour. This compensation range is a good faith estimate for the position at the time of posting. Actual compensation is dependent upon factors such as education, qualifications, experience, skillset, and physical work location.

With supervisor approval, incumbents may be eligible for intermittent remote work; however, they must physically reside within the Sacramento region or have the ability to regularly report to a City of Sacramento physical worksite with little notice. This position is in the Development Review Section within the Engineering and Water Resources Division of the Department of Utilities (DOU). This position is primarily responsible for subdivision plan review related to water, wastewater, and/or drainage requirements, reviewing construction material submittals, and addressing Requests for Information (RFI) during construction projects. Additionally, this position assists in commercial building permit reviews and ensures all assigned plan checks are completed accurately and meet the review requirements. Responsibilities may include answering DOU (water, wastewater & drainage) related questions, coordinating with DOU field staff, reviewing proposed abandonments of DOU infrastructure, DOU Encroachment Permit Review, and/or creating fee estimates. IDEAL CANDIDATE STATEMENT The ideal candidate for this position will be a highly motivated self-starter and team player who can meet deadlines and learn on the job. Some development plan review and/or plan creation experience related to water, wastewater and drainage infrastructure is preferred. To perform entry level professional civil, electrical, or mechanical engineering work in the design, investigation, and construction of public works projects. DISTINGUISHING CHARACTERISTICS This is the entry-level professional engineer classification. Incumbents perform less complex office and field civil, electrical, or mechanical engineering work under general supervision in preparation for advancement to the journey level of Assistant Engineer. Assignments are generally routine or closely related within a framework of established procedures. Upon completion of a twelve-month training period, incumbents will be advanced to the next level of Assistant Engineer if their training performance is successful or released (terminated) if performance is unacceptable. SUPERVISION RECEIVED AND EXERCISED General supervision is provided by a higher level professional engineer. Technical or functional supervision may also be provided by higher level professional engineer positions. Assignment may require indirect supervision of subprofessional engineering positions.Depending upon assignment and engineering discipline, duties may include, but are not limited to, the following: * Coordinate engineering projects between contractors and the City. * Write specifications, prepare plans, and calculate cost estimates for various engineering projects. * Administer and enforce City codes and standards on engineering projects. * Perform plan checks to insure contractor compliance with City specifications. * Respond to citizen complaints concerning engineering problems. * Perform complex engineering calculations. * Perform field inspections of various engineering projects. * Supervise and perform field survey work. * Analyze materials and design data submitted to the City. * Check and analyze Environmental Impact Reports. * Provide engineering data and cost estimates for the City budget. * Check private building plans for compliance with City building codes and ordinances. * Perform related duties as assigned.Knowledge of: * Principles and practices of engineering as applied to public works or structural engineering. * Methods, materials, and techniques used in the construction of public works and utilities projects. * Modern developments, current literature, and sources of information regarding engineering. Ability to: * Make complex engineering computations and to check, design, and prepare engineering plans, studies, profiles, and maps. * Use and care for drafting and surveying instruments. Experience and Education: * EITHER - A bachelor's degree from an accredited college or university with major in an engineering discipline related to the area of assignment. * OR - Possession of an Engineer-In-Training (EIT) certificate. All education requirements must be verifiable from records of satisfactory completion of courses. All EIT certificates must be verifiable. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment. Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. PROOF OF CERTIFICATION Should certification and/or license be used to qualify for this position, then proof of said certification and/or license should be submitted with your application and will be required at the time of appointment. PROBATIONARY PERIOD Employees must successfully complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline; * Employment applications must be submitted online; paper applications will not be accepted. * Employment applications will be considered incomplete and will be disqualified: * If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week). * If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. * Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. * Proof of certification and/or license should be submitted online with your application. Proof of certification and/or license will be required at time of appointment. * Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. * If you're requesting Veteran's credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline. Information regarding the use of Veteran's credit can be found in the Civil Service Board rules under rule 4.9C. * Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam: (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: * Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. * A resume will not substitute for the information required in the T&E questions. 3. Eligibility: Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate's eligibility expires one year from the date of notification of a passing score for the Junior Engineer examination. 4. Screening Committee: (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: * Please visit **************************************************** for a comprehensive, step-by-step guide to the application process. * For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at **************. * Visit the City of Sacramento Human Resources Department website at *********************************************** * Send an email to *******************************; or * Call the Human Resources Department at **************

SUMMER 2026 Shure offers a challenging, fun and rewarding summer internship program. The twelve-week program is offered to undergraduate and graduate students. We offer internships with a variety of work arrangements from onsite interns to fully remote in US. Each intern will receive a competitive salary. Additionally, Interns who are asked to relocate to Illinois for onsite internships will receive a housing stipend to cover living expenses. Applications will be collected, reviewed, and selected candidates will be contacted in late fall/early winter As the Electrical Engineering Intern (Digital Circuitry), you will work under the close direction of senior staff on the design, implementation, and testing of electronic circuits for wireless microphones, signal processors, and conference systems. This Internship is Onsite, based in our Niles, IL location. Responsibilities Designing, simulating, and testing digital circuitry Developing printed circuit board assemblies Assembling prototypes Performing validation testing of circuits Circuit defect analysis and resolution Performing system/sub-system level tests Documentation Completing an independent design project Qualifications Two years of coursework in Electrical Engineering or a related area. Basic knowledge of digital logic circuits, embedded microcontrollers, analog-to-digital converters, digital-to-analog converters, DSPs, FPGAs, and other digital components. Basic knowledge of audio related circuits, audio systems, and audio measurement techniques. Basic knowledge of test equipment such as oscilloscopes, power supplies, and multimeters. Soldering and circuitry building or repair skills Ability to work independently with a high degree of accuracy and an attention to detail. Good communication skills and the ability to work well in a team Experience with schematic CAD software, PCB layout, and SPICE simulation software is a plus. Experience with programming languages or creating test scripts is a plus. Applicants for this position must be currently authorized to work in the United States on a full-time basis. Shure will not sponsor applicants for this position for work visas. WHO WE ARE Shure's mission is to be the most trusted audio brand worldwide - and for over a century, our Core Values have aligned us to be just that. Founded in 1925, we are a leading global manufacturer of audio equipment known for quality, reliability, and durability. We engineer microphones, headphones, wireless audio systems, conferencing systems, and more. And quality doesn't stop at our products. Our talented teams strive for perfection and innovate every chance they get. We offer an Associate-first culture, flexible work arrangements, and opportunity for all. Shure is headquartered in United States. We have more than 35 regional sales offices, engineering hubs, distribution centers and manufacturing facilities throughout the Americas, EMEA, and Asia. Join Shure and Amplify Your Impact. Explore our unique culture and learn the key pillars that define our legacy of excellence. THE MIX MATTERS Don't check off every box in the job requirements? No problem! We recognize that every professional journey is unique and are committed to providing an equitable candidate experience for all prospective Shure Associates. If you're excited about this role, believe you've got the skills to be successful, and share our passion for creating an inclusive, diverse, equitable, and accessible work environment, then apply! PAY TRANSPARENCY Modeled by extensive market analysis and economic best practices, Shure offers competitive intern compensation that is reviewed and adjusted annually by our Total Rewards Team to attract, hire, and retain the industry's top intern talent. Each internship has an hourly rate which varies from $21-$40 per hour based on job function (Engineering, IT, Business, etc) and year completed in school (Junior, Masters 2nd year, PHD, etc). WE GOT YOU - Our Benefits At Shure, we prioritize the well-being of our associates. Benefits for our interns include retirement savings plans and paid time off, employee discounts, professional development opportunities, and work-life balance initiatives. To learn more, check out our Intern Benefits At A Glance

Scout Space Inc. is excited to announce our 2026 internship program! We are seeking candidates in various engineering fields. Please see the below role definitions for these opportunities. All internship opportunities are mainly remote, but may involve in-person opportunities. Scout Space is building a new way to see and operate in space: with a new paradigm of data empowering every satellite to make space safer. We are a rapidly-growing team; we are deploying real solutions to orbit over the next 2 years; and our work will transform the face of spaceflight. We are looking for people that bring excitement and energy to our organization, are curious and eager to learn, and want to help drive our programs forward. Responsibilities: Understand and develop electrical requirements and constraints for spacecraft sensor subsystems. Contribute to electrical design and thermal analysis. Candidate should have full board design experience, handling designs from block diagram stages to board design and procurement, to final board testing and debug. Must understand PCB layout considerations for thermal management, typical fabrication limitations, and signal integrity of high-speed circuits. Candidate should be familiar with designing and reading harnessing diagrams for complex assemblies Design and develop prototype systems for lab test equipment. The ideal candidate should be able to design intuitive controls that are easy to navigate under varying conditions, develop software with a simple and intuitive interface that facilitates both manual and automated processes, build the system with modular components that can be easily upgraded or replaced as needs change and design with the flexibility to integrate new testing protocols, experimental setups, or data analysis tools as the lab's research need to grow. Requirements: Pursuing a Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or other related field. Rising Seniors, or Graduate students only Familiarity with PCB design in Altium, KiCad, Eagle, or similar LTSpice familiarity Python familiarity Proficiency in circuit board testing and debug tools, including but not limited to familiarity with oscilloscopes, waveform generators, and soldering Highly preferred: Demonstrated collaborative experience in a business or project environment. Benefits & Perks: Flexible work hours Free Scout Swag! Opportunities for professional development and growth A dynamic and collaborative work environment at the forefront of space technology Be a part of a team that is making history! Compensation is based upon candidate experience and qualifications, as well as market and business considerations. Standard pay for this internship is $30/hour. Don't fulfill all the qualifications listed above? If you still feel like you might be a good fit, please feel free to APPLY ANYWAY. We believe in a well-rounded team, and this sometimes means that someone with out-of-context knowledge can contribute just as well as someone with very explicit alignment with our capabilities needs stated. Our positions are based in Reston, Virginia, with much of our team operating in a hybrid or remote fashion. Our preference is for candidates in or around this area (or willing to relocate) as we scale our facilities and engineering team to provide more opportunities to work and collaborate in-person. Scout Space Inc. does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor. To conform to US Government space technology export regulations, applicants must be a US citizen, lawful permanent resident of the US, a protected individual as defined by 8 USC 1324b(a)(3), or eligible to obtain the required authorization from the US Department of State. We're Proud to Prioritize Mental Health. Scout Space has been recognized with the Bell Seal for Workplace Mental Health by Mental Health America. This certification reflects our ongoing commitment to creating a supportive environment where mental well-being is valued, protected, and openly talked about. We know that when people feel seen and supported, great work happens, and that is the kind of culture we are building here at Scout Space.

Join our team as a Test Engineer L1, where you will support Power Device Control, Entry, Body Electronics, and powertrain battery systems, with a specific focus on Trailer Control. You will apply engineering principles and leverage your experience to develop test plans and procedures, ensuring that design parts and components meet performance targets and regulatory standards. Responsibilities + Develop and implement test plans and procedures to assess the feasibility of design parts and components. + Create data settings, test specifications, standards, and schedules. + Prepare and set up test equipment for conducting moderately complex tests. + Document and summarize test results and conclusions, ensuring accuracy and thoroughness. + Analyze and interpret test results to predict performance and potential failures. + Communicate test results clearly through written reports and formal presentations. + Propose design changes and recommend countermeasures based on test analysis. Essential Skills + Proficiency in test equipment, electrical engineering, and validation. + Experience in developing and executing test procedures. + Strong ability to set up tests, run tests, and write detailed reports. Additional Skills & Qualifications + Passion for outdoor activities and an understanding of towing. + Preference for candidates with towing experience. Work Environment Work onsite in our engineering offices, where you will have the opportunity to test and develop new concepts on cutting-edge vehicles. Job Type & Location This is a Contract position based out of Raymond, OH. Pay and Benefits The pay range for this position is $35.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Raymond,OH. Application Deadline This position is anticipated to close on Dec 29, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. CMTA is a mechanical, electrical, and civil engineering consulting firm, specializing in building system design, services, and innovative solutions. At CMTA we care about people. We care about the success and wellbeing of our employees, clients, and communities. This translates into an unparalleled work environment and a superior client experience that thrives on integrity, quality, collaboration, and smart innovation. Through our culture shaped by our values, our mission of positively impacting people through innovative facility solutions will be possible. **Job Summary:** This position will perform routine engineering assignments under supervision from a knowledgeable mentor in the field. The Electrical Engineering Intern will gain hands-on experience and mentorship from an Electrical Engineer. The Electrical Engineer Intern will gain knowledge in communication with clients, engineering design elements, and manage sections of a project based on extend of knowledge with final approval from manager on majority of responsibilities. This position will collaborate with other engineers to ensure projects move forward smoothly while gaining knowledge and experience in the electrical department. The intern will complete other duties and responsibilities assigned to assist the electrical department and ensure a successful project completion. **Essential Duties and Responsibilities:** + Assist in engineer power, lighting, communications, and life safety for assigned projects. + Occasionally required presence at onsite visits with construction administration. + Effectively answer questions, stay on schedule, and follow a budget to ensure a project is completed successfully. + Professionally interact with designers, technicians, construction administration, and clients as needed. + Efficiently develop and maintain a balance and schedule between all projects and deadlines. + Seek mentorship and support to guarantee successful design and project completion. + Other duties and responsibilities as assigned. **Qualifications:** + Currently pursuing a degree in Electrical Engineering or related field. + Junior or Senior status preferred. + Proven ability to work successfully on a team and listen carefully. + Desire to produce quality work and grow professionally in the engineering field. + Strong written and verbal communication skills. + Proficiency in the use of Microsoft Office products. + Proven ability to maintain excellent integrity and ethical standards within role. **Compensation:** _Hourly range for new hires is_ **_$23/hour_** . No sponsorship available for this position. \#LI-ACI #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly** **Hiring Min Rate** **20 USD** **Hiring Max Rate** **30 USD**

CMTA is a mechanical, electrical, and civil engineering consulting firm, specializing in building system design, services, and innovative solutions. At CMTA we care about people. We care about the success and wellbeing of our employees, clients, and communities. This translates into an unparalleled work environment and a superior client experience that thrives on integrity, quality, collaboration, and smart innovation. Through our culture shaped by our values, our mission of positively impacting people through innovative facility solutions will be possible.Job Summary:This position will perform routine engineering assignments under supervision from a knowledgeable mentor in the field. The Electrical Engineering Intern will gain hands-on experience and mentorship from an Electrical Engineer. The Electrical Engineer Intern will gain knowledge in communication with clients, engineering design elements, and manage sections of a project based on extend of knowledge with final approval from manager on majority of responsibilities. This position will collaborate with other engineers to ensure projects move forward smoothly while gaining knowledge and experience in the electrical department. The intern will complete other duties and responsibilities assigned to assist the electrical department and ensure a successful project completion.Essential Duties and Responsibilities: Assist in engineer power, lighting, communications, and life safety for assigned projects. Occasionally required presence at onsite visits with construction administration. Effectively answer questions, stay on schedule, and follow a budget to ensure a project is completed successfully. Professionally interact with designers, technicians, construction administration, and clients as needed. Efficiently develop and maintain a balance and schedule between all projects and deadlines. Seek mentorship and support to guarantee successful design and project completion. Other duties and responsibilities as assigned. Qualifications: Currently pursuing a degree in Electrical Engineering or related field. Junior or Senior status preferred. Proven ability to work successfully on a team and listen carefully. Desire to produce quality work and grow professionally in the engineering field. Strong written and verbal communication skills. Proficiency in the use of Microsoft Office products. Proven ability to maintain excellent integrity and ethical standards within role. Compensation: Hourly range for new hires is $23/hour. No sponsorship available for this position.#LI-ACI #LI-Onsite

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers (******************************************* At **DuPont** , our paid internship and co-op opportunities are designed to give students more than just a glimpse into the professional world-they're a launchpad for your future. You'll work on real, impactful projects alongside experienced DuPont professionals, applying what you've learned in the classroom to solve real-world challenges. Through this hands-on experience, you'll build essential skills, grow your network, and gain exposure to a collaborative, inclusive workplace that values innovation and leadership. You will have the opportunity to collaborate across teams and functions, gaining exposure to innovative technologies and diverse perspectives that drive real-world solutions. **As an Engineering intern or co-op, you'll:** + Embrace DuPont's core values in safety, sustainability, and innovation + Gain industrial experience and insight into our businesses, products, and customers + Work in team-based environments with mentorship and technical training + Participate in professional development opportunities tailored to your role Our student program offers both internships and co-op assignments tailored to fit your academic schedule and career goals. Assignment length and scope may vary by site and function, but every experience is designed to help you grow, contribute, and lead. Typical roles in manufacturing, operations, and business at DuPont span a wide range of exciting and impactful areas, including Manufacturing Technical and Process Engineering, Capital Projects, Automation and Process Control, Leveraged Engineering, Equipment Reliability and Maintenance, Continuous Improvement, Product Quality, and Technical Service. Summer interns and co-ops must be available from May - August. **Requirements** To be considered, the following requirements must be met: + Enrolled as a full-time student pursuing a Bachelor's or Master's degree in Chemical, Mechanical, Electrical or other engineering disciplines from an ABET accredited program + GPA of 3.0 or higher (out of 4.0 scale) + Legal right to work in the U.S. without restriction Join our Talent Community (**************************************************** to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information (****************************************************** . DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page (********************************************************** . The Pay range for this role is $16.10 - $25.30 Hourly **How Base Pay is Determined:** DuPont has job leveling frameworks that help organize roles based on progressive levels of responsibility, proficiency and qualifications. Each role has an associated pay range (or an established pay rate for some roles) based on the competitive market in each country where we operate. Each individual's pay is based on a variety of factors, including their role and the associated pay range for that role, their geographic location (i.e., country, state, metropolitan area), as well as their skills, experience, education and certifications, and performance.

The intern will support electrical design engineering tasks including 3D CAD Modeling wiring harness layout, schematic updates, connector selection, and documentation. The intern will work on Liquid cooling platforms, contributing to the development of low-voltage power and control systems. Preferred Major/Field of Study: Electrical or Electronics Engineering Preferred Year: Junior or Senior Tools/Skills Exposure: Creo Electrical, AutoCAD Electrical or similar, schematic tools, PD Cloud PLM, MS Office