Top Electrician Helper Skills

Below we've compiled a list of the most important skills for an Electrician Helper. We ranked the top skills based on the percentage of Electrician Helper resumes they appeared on. For example, 24.4% of Electrician Helper resumes contained RUN Conduit as a skill. Let's find out what skills an Electrician Helper actually needs in order to be successful in the workplace.

The six most common skills found on Electrician Helper resumes in 2020. Read below to see the full list.

1. RUN Conduit

high Demand
Here's how RUN Conduit is used in Electrician Helper jobs:
  • Cut & bend, run conduit and wires, install electrical equipment, breaker boxes, outlets, switches and lights.
  • Perform duties as commercial electricity, pull electric wire, run conduit, install lighting fixtures, among other duties.
  • Help run conduit, pull wire, install cable trays, install and hook-up new transmitters and instruments.
  • Worked alongside a journeyman helping to run conduit and pull wire to and from various electrical equipment.
  • Run conduit, install cable tray, pull wire, and terminate panels, transformer, etc.
  • Bend and run conduit supply mechanic with necessary materials pull wires through conduit run temp lighting assembler/welder
  • Run conduit in designated areas and pull wires or cables through the conduit to complete circuits.
  • Travel to various mills to install industrial equipment, run conduit, pull wire, etc.
  • Run conduit for electrical circuits, bend conduit, and pull wires for electrical circuits.
  • Assist Electricians run conduit, pull wire, hook up motors, terminate, etc.
  • Performed other duties such as run conduit, pull wire and install cable tray.
  • Run conduit, pull wire, run cable tray, install temporary power for turnaround
  • Run conduit, pull wire, and maintains lighting systems and basic motor controls.
  • Helped run conduit, pull wire and terminate at paper mills and other businesses.
  • Measure bend and run conduit run cable from panel to panel hang Angle iron
  • Install high voltage panel boxes, run conduit, and cable trays.
  • Run conduit, tray and tubing pull wire in conduit and trays.
  • 50613Helped pull wire, run conduit, put devices in and terminate ends
  • Pull wire, run conduit, connect circuits, install fixtures and outlets
  • Run conduit, cable tray, pull wire, terminate low voltage

Show More

2. Electrical Systems

high Demand
Here's how Electrical Systems is used in Electrician Helper jobs:
  • Work done: Assisting electrician in installation and maintenance of commercial and residential electrical systems, insulating houses and performing general maintenance
  • Experience in detailed knowledge of electrical systems including preparation, additions for extras, and modifications on minor circuits
  • Conducted skilled journeyman-level electrical work involving installations, modifications, inspections and troubleshooting to residential electrical systems.
  • Performed installation of basic residential wiring, fixtures, plugs and general troubleshooting of electrical systems.
  • Assisted master electrician with residential and commercial installations and repair of electrical systems.
  • Worked offshore repairing oil-rig mechanical and electrical systems that were damaged during hurricane.
  • Assisted Licensed Electrician in installation and repair of commercial electrical systems.
  • Install and repair electrical systems in new and existing residential applications.
  • Assisted in replacement of outdated electrical systems in houses being remodeled.
  • Identify hazards or defeats in electrical systems by performing periodic inspections.
  • Installed and repaired electrical systems in industrial and commercial properties.
  • Assisted foreman and electrical team in the installation of electrical systems
  • Installed electrical systems for various industrial and commercial construction.
  • Assisted electricians to install repair or maintain electrical systems.
  • Assisted with preventative maintenance and diagnosis of electrical systems.
  • Assisted in installation and maintenance of electrical systems.
  • Installed and troubleshooted commercial and industrial electrical systems.
  • Work on various electrical systems for military installations.
  • Assisted electricians with installing and maintaining electrical systems.
  • Assist Journeyman Electrician with installation of electrical systems.

Show More

3. Hand Tools

high Demand
Here's how Hand Tools is used in Electrician Helper jobs:
  • Attained experience in using hand tools specifically designed for electrical related work.
  • Disassembled faulty electrical equipment and replace parts equipment using hand tools.
  • Operate power hand tools and other specialized electrical equipment.
  • Operate all hand tools as well as different machines such as excavators, scissor and booms lifts, forklifts, etc.
  • Installed and repaired electrical wiring, equipment, and fixtures Measured/cut wire and conduit, using ruler and hand tools.
  • Position Summary: Installed electrical wiring, equipment, apparatus, and fixtures, using hand tools and power tools.
  • Help electricians by performing duties as measuring, cutting and binding wires and conduits using measuring instruments and hand tools.
  • Maintained and organized tools and equipment, measured, cut and blended wire/conduit using measuring instruments and hand tools.
  • Use numerous tools and equipment including voltmeter, circular saws, power drills, level, and hand tools.
  • Assemble, install, test electrical wiring, equipment, or fixtures, using hand tools and power tools.
  • Carry materials such as fittings, electrical conduit, hardware, wire, and hand tools to assigned locations.
  • Helped measure, cut, bend, thread, assemble and install electrical conduit using ruler and hand tools.
  • Read blueprints, measured, cut, and bent wires and conduits, using measuring instruments and hand tools.
  • Inventory, measure, cut, and bend wire and conduit, using measuring instruments and hand tools
  • Used basic hand tools on a daily basis, Helped read schematic drawings, assisted in pulling/running wire
  • Used hand tools to disassemble, replace defective parts as needed and reassemble electric systems and components.
  • Drilled holes and pulled or pushed wiring through openings, using hand tools and power tools.
  • Measured, cut, and bent wires and metal, using measuring instruments and hand tools.
  • Used tools such as stripping tools, meters, cable cutters and power hand tools.
  • Measured, cut, and bent wire and conduit, using ruler and hand tools.

Show More

4. Light Fixtures

high Demand
Here's how Light Fixtures is used in Electrician Helper jobs:
  • Participated in retro-fitting and converting light fixtures to accommodate the more efficient service.
  • Install light fixtures and electrical outlet commercial and residential* Electrical wiring
  • Assisted journeyman electricians with installing conduit and associated fittings, pulling wire and cable, installing light fixtures and associated devices.
  • Worked with electricians to pull cable wire, made conduit and terminated wires, installed light fixtures, conduits and duct banks
  • Worked directly under master electrician, hanging light fixtures, rolling wire and digging holes, learning position quickly and efficiently.
  • Assisted electrician, tapped wires, bent conduit pipes, installed light fixtures, operated drills, saws and hand tools.
  • Initiated a special project which reduced energy costs to the Medical Center while increasing the energy efficiency of light fixtures.
  • Performed as the Top helper, assisted the Journeyman Electrician with running conduit, installed light fixtures and Industrial motoring.
  • Installed fans, light fixtures, conduit bending, plugs, switches and electrical appliances in residential and commercial sites.
  • Interpreted blueprints, installed light fixtures, and accompanied electrician on service calls to both private homes and businesses.
  • Wired simple 1 way switch circuits and duplex outlets, hung light fixtures, ceiling fans and bathroom fans.
  • Bend Conduit, Run and Pull Wire, Wire Panel Boxes, Light Fixtures, Operation of Equipment.
  • Mount four square boxes to put either high voltage or low voltage wire to power any light fixtures.
  • Wired and terminated motors, lights, sensors and installed light fixtures, ballast, lamps, outlets.
  • Studied blueprints and marked residences for proper location of switches, plugs, light fixtures and ceiling fans.
  • Installed switches and electric lines, wired light fixtures, buried cables; most work to involve commercial businesses
  • Install electrical circuits, power outlets, light fixtures, appliances, using hand tools and power tools.
  • Assist in underground electric, install light fixtures, rough in walls, pull wire, trim out.
  • Assisted master electrician by pulling wire, installing light fixtures, installing outlets, and running conduit.
  • Assisted in wiring electrical panels, junction boxes, light fixtures, running and bending electrical conduits.

Show More

5. Receptacles

high Demand
Here's how Receptacles is used in Electrician Helper jobs:
  • Installed receptacles and switches - Ran Circuits- Spliced Boxes- Installed Lights- Service Upgrades-Delivered Materials
  • Terminated on various electrical equipment including motors, lights and receptacles.
  • Repaired damaged lighting fixtures and receptacles.
  • Cable pulling to termination into receptacles
  • Install devices, such as receptacles, switches, lights, smoke detectors, and fire alarm pull stations and strobes.
  • Install smoke detectors, circuit breakers, light fixtures, receptacles, dryer outlets, HVAC disconnects, & range outlets.
  • Install and service light fixtures, receptacles, electrical control systems and connect wires to transformers, disconnects and breaker panels.
  • Helped an electrician with pulling wires, running conduit, installing receptacles and switches, installing lights and various other tasks.
  • Run conduit, pulled wires, pulled cable wires, fire alarm installation, installed receptacles, switches, and lighting.
  • Assisted on residential and construction; wired switches, receptacles, lighting fixtures, pulled wire, wired electrical distribution panels
  • Installed and/or replaced meters, breakers, wall outlets, and receptacles Connected and disconnected wiring, piping and tubing.
  • Install smoke and heat detectors, install pull alarm boxes, switches and receptacles, run wires, bend pipe.
  • Preformed some pipe bending (which I didn't master), made up control boxes for lighting and receptacles.
  • Assist journeyman in pulling wire, running conduit pipe, bending pipe, setting j-boxes replacing receptacles and switches.
  • Assisted the Master Electrician with wiring for switches, receptacles, junction boxes for lighting and other electrical functions.
  • Installed cabling, overhead lighting, bunk fans, bunk lights, switches, receptacles, heaters and thermostats.
  • Assisted with the installation of bathroom fixtures, ceiling lights, smoke detectors, light switches, and receptacles.
  • Run conduit, pull wire in the wire racks, wiring receptacles and platforms lights in the industrial plants.
  • Installed, repaired, replaced circuits, electrical appliances and devices such as receptacles, switches, fixtures etc.
  • Assist electricians with the installation of electrical wiring, electrical receptacles, lighting fixtures, and commercial equipment.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Conduit Ends

high Demand
Here's how Conduit Ends is used in Electrician Helper jobs:
  • Threaded conduit ends, connect couplings, and fabricate offsets, saddles, 90's etc.
  • Tread conduit ends using a pipe threader and connect couplings fittings using hand tools.
  • Threaded conduit ends, connected couplings, and utilized a variety of tools.
  • Thread conduit ends, connect couplings, and fabricate and sec
  • Threaded conduit ends for proper fit.
  • Thread conduit ends and pull wire.
  • Thread conduit ends, connect couplings, and fabricate and secure conduit supportbrackets, using hand tools.
  • Threaded conduit ends, connected couplings, and fabricated and secured conduitsupport brackets, using hand tools.and y was a liedman

Show More

7. Faulty Circuit Breakers

high Demand
Here's how Faulty Circuit Breakers is used in Electrician Helper jobs:
  • Assist in Replacing faulty circuit breakers, fuses, switches or wire.
  • Replaced faulty circuit breakers, fuses, fuses boxes, switches, electrical and electronic components, or wire.
  • Replace faulty circuit breakers, fuses, switches, and replace old fuse boxes.
  • Replace faulty circuit breakers, fuses, switches and electrical components.
  • Replace faulty circuit breakers, fuses, switches, electrical and electronic components, or wire.
  • Replaced faulty circuit breakers, fuses, switches, electrical and electronic components, or wire.

Show More

8. Defective Electrical Equipment

high Demand
Here's how Defective Electrical Equipment is used in Electrician Helper jobs:
  • String lines are cable through ducts also disassemble defective electrical equipment.
  • Disassemble defective electrical equipment, replace defective or worn parts.
  • Construct controllers and panels Disassemble defective electrical equipment, replacing and reassembling equipment.
  • Disassemble defective electrical equipment and replaced defective or worn parts.
  • Disassembled defective electrical equipment, replaced defective/worn parts.
  • Disassembled/Replaced worn and defective electrical equipment.

Show More

9. Wire Ends

high Demand
Here's how Wire Ends is used in Electrician Helper jobs:
  • Stripped insulation from wire ends and created electrical connections using stripping pliers, soldering iron and coupled power-supply circuits.
  • Strip insulation from wire ends, by means of wire stripping pliers, and fasten wires.
  • Strip insulation from wire ends, tie or screw wire to terminals for subsequent soldering.
  • Strip insulation from wire ends, Thread conduit ends, and connect couplings.
  • Crimped terminal eyelets and lugs to wire ends, using mechanical crimping device.
  • Striped insulation from wire ends, using wire stripping pliers.
  • Skin wire ends and phase with tape or markers.
  • Strip insulation from wire ends.
  • Strip insulation from wire ends, using wire stripping pliers, and attach wires to terminals for subsequentsoldering Demolition and rubble removal
  • Strip instalation from wire ends.
  • Strip insulation from wire ends, using wire stripping pliers, and attach wires to terminals Wiring of recepticals and fixtures
  • Strip insulation from wire ends, using wire stripping plier andattach wires to differ loads such as outlet switch and lamp .
  • strip insulation from wire ends and attach to terminals .

Show More

10. Electrical Units

high Demand
Here's how Electrical Units is used in Electrician Helper jobs:
  • Repaired electrical units that were under warranty.
  • Assisted electrician in the installing, repairing, replacement and refurbishing of all electrical units.
  • Service oil pump jacks Installments of electrical units Call services
  • Installed basic electrical units and systems under the supervision of the electrician
  • Assisted electrician with examining electrical units for loose connections.
  • Examined electrical units for loose connections and broken insulation.

Show More

11. EMT

high Demand
Here's how EMT is used in Electrician Helper jobs:
  • Assisted the electrician with various duties, including bending EMT Pipe, pulling new wire in new installation, and reading blueprints
  • Installed EMT/Rigid conduit and installed conductors, spliced wires to make junction boxes, made terminations and wired devices.
  • Installed EMT and RoMax according to the circuit requirements; Installed wire feeders, lighting receptacles and switches
  • Installed, bent and cut PVC and EMT pipe for underground service and fire/alarm systems.
  • Pulled wires in EMT pipe, made up circuits in junction boxes, labeled panels.
  • Completed various tasks that included bending, threading, and running EMT and Rigid conduit.
  • Installed EMT and NMC conduit; pulled cable; installed electrical devices in commercial installations.
  • Arrange wiring, fixtures, bending conduit EMT and rigid in preparation for installations.
  • Bend half inch to inch and a quarter EMT conduit for a school.
  • Assisted with bending electrical conduit, installing and maintaining EMT and Rigid pipe.
  • Located proper size connectors and couplings for EMT piping and Greenfield cables.
  • Install and bend EMT conduit, install and pull branch circuits wires.
  • Performed conduit works; replaced and bent EMT and rigid steel conduits.
  • Preformed pipe bending, and running of EMT and other electrical conduit.
  • Installed EMT conduit at multiple widths using hand and machine benders.
  • Bend EMT conduit, run wire, install/replace switches and outlets.
  • Roughed in new building with metal clad cable and EMT conduit.
  • Measured and cut EMT and galvanized pipe to specified length.
  • Run and bent EMT for water heaters and kitchen equipment.
  • Know how to bend various thicknesses of EMT conduit.

Show More

12. PVC

high Demand
Here's how PVC is used in Electrician Helper jobs:
  • Pulled Simple residential wire, ran PVC pipe, organized hand tools, and helped dig trenches
  • Experience in digging trenches, running PVC pipes, and pulling wire.
  • Fabricate and install PVC or Rigid conduit for electrical wire.
  • Install underground PVC and set man holes.
  • Installed underground PVC conduit for wiring.
  • Bury PVC pipes for outside lights.
  • Mounted panels and ran PVC pipes.
  • Pull wire* Insert outlets* Bury PVC pipes
  • Trench ground for PVC installation.
  • Installed underground wiring through PVC.
  • Trenched up to 500 ft. to 1500 ft. of wire to be put in PVC piping and sent to junction boxes.
  • Run and bend conduit 3/4 to 1 1/2 and PVC.
  • Install rigid and PVC pipe, short and long haul.
  • Used a hotbox to make bends with PVC.
  • Can also bend PVC pipe.
  • Performed slab, ran 1/2" to 4" PVC pipe and installed panels, 277 to 480 volts* Terminated disconnects.
  • Heated and bent PVC pipe Ran wire, pulled 350 wires from outside transformer to main building control panel.
  • Help the electricians in any way possible, shape PVC pipe for cables for different areas
  • Dig trenches to run PVC pipe from time clocks to light poles for housing complex.
  • Run PVC conduit, trench install panels, lights, and assist with setting switchgear.

Show More

13. Test Meter

high Demand
Here's how Test Meter is used in Electrician Helper jobs:
  • Pull wires through raceways and conduits, mounting outlets and switches Trace out short circuits in wiring, using test meter.
  • Trace out short circuits in wiring, using test meter.Test electrical equipment or systems to ensure proper functioning.
  • Drill holes and drag or drive wiring throughout openings Find short circuits in wiring with test meter.
  • Trace out short circuits in wiring, using test meter Gauge tank levels, using calibrated rods
  • Trace out short circuits in wiring, using test meter.
  • Trained by master electricians to properly trace out short circuits in wiring, using test meters.

Show More

14. Job Site

high Demand
Here's how Job Site is used in Electrician Helper jobs:
  • Delivered electrical equipment to job site.
  • Assisted the journeymen on job site, ran wire and helped with the electrical set up of fixtures and breakers.
  • Job responsibilities - Assist in all facets of electrical installations, job site set up, clean up.
  • Responded to the Electrician's orders, maintained the cleanliness of the job site and performed other duties.
  • Filled electrical material order to construction job sites - McCorrmick Place, Cook County Jail and Sears Tower
  • Ensured tools and supplies were accounted for and the job site clean and neat at job completion.
  • Aided electricians on job sites in various capacities, such as running wire and installing light fixtures.
  • Ensured that there were enough tools on the new job site by loading and reloading the truck.
  • Assist Electricians at the job site, most recently a stop light project and two schools.
  • Receive, Ship, Stock, and Deliver parts to different sections on the job site.
  • Prepared job site by setting up ladders, scaffolding's, drop cloths, and tools.
  • Required to meet schedule deadlines and quality control specifications and keeping job site neat and clean.
  • Helped install new service, devices, fixtures and generators to new commercial job sites.
  • Learned the use of various tools of the trade and safety procedures for job sites.
  • Job duties - work with other electricians to perform electrical work on construction job sites.
  • Analyzed any problems that customers may have questions or concerns while on the job site.
  • Executed daily operations of cleaning job sites, trucks, shop, and organizing material.
  • Maintained equipment and transportation vehicles as well as heavy equipment used on the job site.
  • Delivered proper materials to different job sites in order for jobs to be completed.
  • Operated various work vehicles to and from job sites in order to transfer materials.

Show More

15. Electrical Outlets

average Demand
Here's how Electrical Outlets is used in Electrician Helper jobs:
  • Pulled wire and installed electrical outlets to specifications in residential and commercial properties,
  • Executed daily operations of wiring electrical outlets and lighting fixtures.
  • Install light fixtures, install electrical outlets, electrical wiring, test electrical output, worked in a face pace setting
  • Help Pull Wire, Install electrical outlets and switches, and be an all out asset to the company.
  • Installed lighting fixtures in ceiling grids, installed electrical outlets, and any other items per instruction.
  • Install lighting, electrical outlets, circuit breakers, fuses, switches, electrical panels and components.
  • Install new lighting, ceiling fans, electrical outlets, and hook up power to appliances.
  • Installed insulation, copper bus plates and cables, battery racks, electrical outlets and lighting.
  • Install lighting, electrical outlets, steel piping, underground conduit, and circuit breakers.
  • Installed lighting, electrical outlets, and circuit breakers, bent and threaded conduit.
  • Install light bulbs, security systems, doors, cabinets, and electrical outlets.
  • Installed sound and security systems, lighting, electrical outlets, and circuit breakers.
  • Installed electrical appliances, light fixtures, electrical outlets/switches as well as running/terminating wire.
  • Install lighting, electrical outlets, and circuit breakers in newly built homes.
  • Wire electrical outlets, install light fixtures, run wires through the attic.
  • Installed electrical wiring, light fixtures, electrical outlets, and service panels
  • Wired light features installation, install electrical outlets and appliance hook ups.
  • Installed & assisted with electrical outlets/residential and some small commercial stores.
  • Assisted in adding new electrical outlets, switches, and fixtures.
  • Job consisted of re-wire, changing electrical outlets, and house framing

Show More

16. New Construction

average Demand
Here's how New Construction is used in Electrician Helper jobs:
  • Performed electrical-related wiring and installation for commercial construction projects, including new construction, retrofits, remodels, and expansions.
  • Performed electrical-related wiring and installation for commercial construction projects, including new construction for Home Depot.
  • Accomplished new construction wiring runs and electrical box installations as installation team member.
  • Performed maintenance and new construction for Eastman Chemical Company.
  • Provided electrical volunteer work for new construction residence.
  • Supplied electricity in new construction buildings.
  • Supervised new construction projects as Foreman.
  • Installed electrical and low voltage wiring, lighting, hardware, and services for both new construction and remodeled homes.
  • Assisted lead electrician in rough phase and trim phase wiring and device and appliance assembly of new construction homes.
  • Assisted the Electrical Foreman in daily tasks for Commercial and Residential projects, to include renovation and new construction.
  • Wired new construction, updated wiring in existing homes, installed various types of electrical fixtures and devices.
  • Assisted Electrician in installing and repairing wiring, and fixtures in commercial businesses and new construction homes.
  • Helped install in-home stereos, intercom systems, vacuum systems, remodeling, and new construction projects.
  • Assisted the lead electrician in wiring new construction homes for all lighting, equipment and power.
  • Pulled wired for new construction, made junction boxes and designed copper wire pathways and trays.
  • Run pipe for new construction* Run electrical wire for new construction* Terminate new lines* Fork lift operator
  • Work alongside owner in residential settings: new construction, remodels, service calls, etc.
  • Developed skills and knowledge in all phases of wiring new construction projects using blueprints and schematics.
  • Installed wiring, boxes, devices, and lighting during all phases of new construction work.
  • Panel box installation, meter box installation, including bending conduit for new construction wiring.

Show More

17. Strip Insulation

average Demand
Here's how Strip Insulation is used in Electrician Helper jobs:
  • Strip insulation from wire, using wire strippers, lineman knife and scissors so that the journeyman can properly connect wires.
  • Strip insulation off wires and plug them to correct breakers in breaker box.17.
  • Strip insulation from wires using wire stripper pliers.
  • Strip insulation from ends of wire, using electrician's knife, and connected wire to terminals.
  • Strip insulation from wire ends, by means of wire stripping pliers, and fasten wires to terminals for later soldering.
  • Strip insulation from wire ends, using wire strippers, and attach wires to make taps.

Show More

18. Trouble Shooting

average Demand
Here's how Trouble Shooting is used in Electrician Helper jobs:
  • Trouble shooting circuits* Complex and simple wiring industrial/residential
  • Installed light fixtures, outlets, GFCI's., and service panels, ran wires, circuits, and learned trouble shooting skills
  • Assisted in the installation of light fixtures, wire pulling, trouble shooting and any other duties assigned by supervisor.
  • Use trouble shooting skills for completion of a broad range of electrical operations and equipment from ground up.
  • Trouble Shooting* Exchanging out parts* Routing Harness* Making sure harness weren't damage* Keeping work area clean
  • Trouble shooting and by passing to check out certain electrical problems a client might be having.
  • Gained Knowledge of all phases of traffic signal operations, electronics and trouble shooting.
  • Job Description: Electrical maintenance, construction and trouble shooting in industrial plants.
  • Installed and repaired general wiring, Installed electrical fixtures, trouble shooting.
  • Assisted in trouble shooting various electrical problems in residential and commercial jobs.
  • Trouble shooting on motors, lights, switches and other various things
  • Provided support when trouble shooting and doing warranty work.
  • Trouble shooting electrical problems in houses and commercial businesses.
  • Trouble shooting electrical problems and emergency service calls.
  • Assist electrician bending pipe and trouble shooting.
  • Major trouble shooting using wiring diagrams/ prints.
  • Trouble shooting for electrical problems.
  • Completed electrical wiring installation for hydraulic control motor per specifications Performed the wiring trouble shooting as required on electrical panels
  • Operate ditcher and help out electrician in installing motor on well units and operate trouble shooting on wells and panel racks.
  • Assisted with all electrical and plumbing work both trouble shooting and repair that needed done all of the school district.

Show More

19. Attach Wires

average Demand
Here's how Attach Wires is used in Electrician Helper jobs:
  • Measure, cut, and bend wire and conduit, using attach wires to terminals.
  • Bend wire and conduit, and attach wires to terminals for subsequent soldering

Show More

20. Switch Panels

average Demand
Here's how Switch Panels is used in Electrician Helper jobs:
  • Assist in pulling and installing wires through conduit leading to connection boxes, switch panels and other terminals.
  • Secure brackets; pull wire through conduit leading to connection boxes, switch panels & other terminals.
  • Measured, cut, pulled wire to connection boxes, switch panels, and other terminals.
  • Place brackets with screws and bolts to pull wires through conduit to connect to switch panels.
  • Installed switch panels and performed work on projects for commercial and residential development.
  • Pulled wire through conduit to boxes, switch panels and terminals.
  • Wired connection boxes, switch panels, and other terminals.
  • Maintained wiring through connections boxes,switch panels, and other terminals.

Show More

21. Conduit Fittings

average Demand
Here's how Conduit Fittings is used in Electrician Helper jobs:
  • Thread conduit ends and connect couplings and conduit fittings using wrench, installing pipes and pulling wires and run condor.
  • Thread conduit ends and connected couplings and conduit fittings Repaired fuse boxes when damage or outage.
  • Thread rigid conduit ends and connect couplings and conduit fittings using appropriate tools.
  • Thread conduit ends, connect couplings & conduit fittings.
  • Connected couplings and conduit fittings.
  • Threaded conduit ends, using pipe threader, and connectscouplings and conduit fittings, using wrench.
  • Measure and cut pipe conduit to specified lengthThread conduit ends, using pipe threader, connect couplings and conduit fittings.Pull wire

Show More

22. Connection Boxes

average Demand
Here's how Connection Boxes is used in Electrician Helper jobs:
  • Secure brackets to bulkheads with screws and bolts and pull wires through conduit leading to connection boxes.
  • Labor work; pipe bending, wire pulling, installation of connection boxes.
  • Pulled and ran 12-2 and 14-2 romex wire along walls and overhead ceilings into connection boxes.
  • Pulled wire s leading them to connection boxes, and other terminals.
  • Pulled wires to connection boxes, and other terminals.

Show More

23. Conduit Support Brackets

average Demand
Here's how Conduit Support Brackets is used in Electrician Helper jobs:
  • Thread conduit ends, connect couplings, and fabricate ad secure conduit support brackets, suing hand tools.
  • Threaded conduit ends, connected links and conduit fittings, as well as fabricated conduit support brackets.
  • Threaded conduit ends, connected couplings, and secured conduit support brackets
  • Fabricated conduit support brackets from strap iron strips.
  • Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets Able to read and scale blue prints.
  • Disassemble defective electric equipment *Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets.
  • Thread conduit ends,connect couplings, fabricate and secure conduit support brackets
  • Fabricate and secure conduit support brackets Clean work area and tools
  • Run wire,cut and bent conduit,threaded conduit ends,connected couplings,fabricated and secured conduit support brackets.

Show More

24. MC

average Demand
Here's how MC is used in Electrician Helper jobs:
  • Help and assist in any or all other electrical job tasks in duct banks, man holes and MCC buildings.
  • Assisted with cable tray, wire and cable pull and termination in MMC room, (Powerhouse).
  • Worked in the industrial sector using knuckle boom to apply rigid and IMC pulling wire and adding circuits
  • General installation of electrical components (switches, fixtures, MC cables, etc.)
  • Maintained tools, MCC, transformers and equipment and kept parts and supplies in order.
  • Excelled in team environment installing electrical conduit, wiring systems, and MCC terminations.
  • Assisted in running conduit, MC cable, pulling wire and termination breaker panel.
  • Run MC over trusses and set lights also connecting lights, outlets etc.
  • Established receptacle and lighting circuits using #12-2 and #12-4 MC.
  • Obtained badge for McGuire Nuclear Plant to assist with 3 month project.
  • Pull wire from MCC to terminal it is connecting to.
  • Packed MCT's with compression blocks and closed existing ones.
  • Assembled in-wall and ceiling MC cable rough-in packages.
  • Grounded cable trays Placed cables into MCC cabinets.
  • Installed new MCC cabinets, and switch gear.
  • Pulled 500 MCM wires for service entrance.
  • Run MC with a mechanic and foreman.
  • Run and bent aluminum conduit inside MCC.
  • Install conduit, MCC's, PLC'S, lighting and control cabinets.
  • Help run wire, conduit, terminate, MCC's, etc.

Show More

25. Electrical Wire

average Demand
Here's how Electrical Wire is used in Electrician Helper jobs:
  • Set all electrical wires, control panels, weather heads and pads at correct depths and measurements to pass inspection.
  • Install light bases for Runway Lights on the helicopter pad, run conduit underground and run electrical wire through conduit
  • Assist the Electrician with daily responsibilities, including installation of electrical wire in new and old homes.
  • Help install conduit, run electrical wires, operate saws, drills, and other power tools
  • Assisted with electrical wires, pulling wires, replacing electrical components, and other electrical duties.
  • Cut, threaded, bent, and installed conduit to run electrical wires.
  • Applied necessary electrical wires in proper areas of both commercial and residential buildings.
  • Worked on Duct Banking Crew which installed underground electrical wires and electrical manholes.
  • Help run electrical wires and put in service poles for homes and industrial buildings
  • Assist in installation of electrical wires, fixtures, outlets, etc.
  • Assist electricians with installing and repair electrical wires, fixtures and equipment.
  • Help on installing conduit and ran electrical wire through the conduit.
  • Assist electrician pulling, installing, and repairing electrical wire/cables.
  • Shaped, installed and pulled electrical wires through electrical conduit.
  • Helped bend conduit and run electrical wire in commercial buildings.
  • Run electrical wires in attic of new model homes.16.
  • Installed electrical wires, switches, outlets, etc.
  • Run electrical wires through conduit for lighting and receptacles.
  • Bend, cut and install conduit for electrical wires.
  • Learned how to tie electrical wires into control panels.

Show More

26. Circuit Breakers

average Demand
Here's how Circuit Breakers is used in Electrician Helper jobs:
  • Installed and repaired electrical equipment such as circuit breakers, fixtures, wall sockets, plugs and switches.
  • Install, test and maintain electrical equipment, Connect wires to circuit breakers, transformers or other components.
  • Connected wires to circuit breakers, transformers, motors, lights, CP panels and junctions boxes.
  • Install power systems such as, sound, alarm, lighting outlets, circuit breakers/ panels.
  • Connect wires to circuit breakers, Advise management on whether operation of equipment could be hazardous.
  • Connect all wire types to circuit breakers, outlets, transformers, and other components.
  • Completed trim out of buildings, which involved lighting, electric switches and circuit breakers.
  • Core Technologies: Electricity installation, Pipe bending, pipe threading, Circuit breakers.
  • Pulled cable and assisted in making up terminals in junction boxes and circuit breakers.
  • Experienced in installing lighting fixtures and panels, circuit breakers, and transformers.
  • Provide connection to circuit breakers and transformers to deliver energy throughout building.
  • Connect switches, outlets and other fitting, connect circuit breakers.
  • Test circuit breakers, repair, and check out equipment.
  • Install circuit breakers, transformers and new automated systems.
  • Installed and troubleshot service panels and individual circuit breakers.
  • Connect wires to circuit breakers and other electrical devices.
  • Installed circuit breakers and wiring in electrical panel.
  • Connected wires to circuit breakers and transformers
  • Connect switches and circuit breakers.
  • Installed circuit breakers and boxes.

Show More

27. Drill Press

average Demand
Here's how Drill Press is used in Electrician Helper jobs:
  • Construct controllers and panels, using power drills, drill presses, taps, saws and punches.Fabricate parts or components.
  • Constructed controllers and panels,using power drills, drill presses, taps, saws and punches.Massana Construction, TexasHighway MaintenanceSept.
  • Construct controllers and panels, using power drills, drill presses, taps, saws and punches for 10 houses weekly.
  • Aided in construction of controllers and panels, using power drills, drill presses, taps, saws and punches.
  • Construct controllers and panels, using power drills, drill presses, tape, saws, and punches.
  • Mounted controllers and panels using power drills, drill presses, taps, saws, and punches.

Show More

28. High Voltage

average Demand
Here's how High Voltage is used in Electrician Helper jobs:
  • Assisted in advanced wiring and maintained high voltage equipment, deconstruction of commercial and residential boilers and refrigerators for part replacements.
  • Install direct buried and underground high voltage cable - Run grounding for all cable and equipment - Terminate high voltage aluminum cable
  • Used and maintained various hand and power tools relating to high voltage electrical work.
  • Set both high voltage and low voltage wires to their respective rooms.
  • Provided help in the assembly and connection of high voltage sub stations.
  • Job duties: Pulling high voltage wire, splice high voltage.
  • Dig trenches according to blueprint to run underground high voltage cable.
  • Experienced in running conduit, and working with high voltage.
  • Installed high voltage and low voltage electrical lines in conduit.
  • Installed transformers in high voltage systems and power lines.
  • Install & repair various electrical circuit including high voltage
  • Work with low voltage to medium-high voltage systems.
  • Installed high voltage underground and overhead cables.
  • Worked with high voltage and troubleshooting.
  • Run high voltage cables to equipment.
  • Helped with High voltage panel installation.
  • Worked on high voltage termination crew.
  • Pull in high voltage wire.
  • Pulled heavy high voltage cables and helped fabricate conduit for a flare gas management project at a Exxon/Mobile oil refinery.
  • Set up transformers, sectionalizers, and junction boxes for underground high voltage electricity.

Show More

29. Service Calls

average Demand
Here's how Service Calls is used in Electrician Helper jobs:
  • Conducted various electrical/mechanical troubleshooting service calls and inspections.
  • Helped electricians doing residential work by wiring houses, installing devices and fixtures, setting appliances, and doing service calls.
  • Assist the electrician with residential and commercial service calls, fixing electrical systems, circuits, outlets and lighting problems.
  • Assisted in repair service calls involving appliances, swimming pools, security gating, and breaker box installation/change-out.
  • Assisted Journeymen with the wiring of new residential and commercial properties -Assisted with service calls and remodels
  • Gained a vast knowledge of the electrical trade mostly on a residential basis and service calls.
  • Used company vehicles and tools to complete service calls by going to customers homes and businesses.
  • Assist Lead Electrician with service calls and troubleshooting, pulling wire, lightning and various installations
  • Acted as an assistant on advanced commercial electrical installations and service calls to solve issues.
  • Assisted electrician wiring homes, making up service panels and answering service calls.
  • Accompanied foremen on service calls, troubleshooting and installing various devices.
  • Performed service calls to perform repairs and installations per customer requests.
  • Attended to electrical service calls for new and preexisting clients.
  • Handled emergency service calls for both commercial and residential.
  • Service calls including residential, commercial, and industrial.
  • Assisted in service calls on an as needed basis
  • Wired appliances and responded to service calls.
  • Assisted journeymen in various electrical service calls.
  • Wired homes and assisted on service calls.
  • Wired new homes * Maintenance and service calls

Show More

30. Wire Strippers

low Demand
Here's how Wire Strippers is used in Electrician Helper jobs:
  • Use a variety of equipment including screwdrivers, pliers, hacksaws, knives, wire strippers, saws and drills.
  • Use tools such as conduit benders, wire strippers, pliers, various sockets and knifes.
  • Used tools such as lineman and needle nose pliers, wire strippers, and power tools.
  • Used multiple tools including conduit benders, hacksaws, and wire strippers.
  • Use tools such as screw drivers, pliers, knives, and wire strippers, and other power tools as needed.
  • Used lineman's pliers, wire strippers, pliers, and band saw.
  • Used tools such as conduit benders, screwdrivers, pliers, knives, Porter Ban, and wire strippers,Threader's

Show More

31. Reassemble Equipment

low Demand
Here's how Reassemble Equipment is used in Electrician Helper jobs:
  • Disassemble broken or defective equipment to facilitate repair and reassemble equipment when repairs are complete.
  • Reassemble equipment after completion of inspections, testing, or repairs.

Show More

32. Residential Homes

low Demand
Here's how Residential Homes is used in Electrician Helper jobs:
  • Assisted with all electrical wiring and repairing in residential homes and commercial businesses
  • Prepared interior/exterior for painting of residential homes and commercial buildings.
  • Assisted in electrical installation of new residential homes.
  • Performed upgrades on existing residential homes.
  • Painted residential homes and commercial property.
  • Installed electrical systems in residential homes.
  • Assisted in laying PVC pipe and copper pipe for water lines, bathroom plumbing and gas lines in residential homes.
  • Worked with and assisted electricians in residential homes, installed new electrical systems and maintained older systems.
  • Install full service of residential homes including meter box, weather head, circuit box.
  • Wired new residential homes, wired renovations and troubleshoot service calls for electrical malfunctions.
  • Installed interior and exterior conduits on residential homes for outlets, fixtures and switches.
  • Assisted with all areas of electrical installation, troubleshooting and repairs in residential homes.
  • Service repairs for residential homes installing light fixtures, fans and all equipment.
  • Drill holes and drag or drive wiring throughout buildings and residential homes.
  • Assisted in all aspects of the rough in side of residential homes.
  • Participate in call outs and help troubleshoot electrical problems in residential homes.
  • Assist lead mechanic in roughing in and trimming in new residential homes.
  • Assisted in setting up and wiring breaker boxes for residential homes.
  • Rewired older apartments and residential homes, and some commercial buildings.
  • Helped with pulling wire and hanging light fixtures for residential homes.

Show More

33. Osha

low Demand
Here's how Osha is used in Electrician Helper jobs:
  • Maintained compliance with all OSHA, company and customer-specific safety requirements.
  • Operated within OSHA safety regulations and company regulations.
  • Demonstrated safe work habits and proper care for tools and equipment under OSHA standards.
  • Followed environmental standards set forth by base commander as well as OSHA.
  • Trained and followed OSHA regulations and worked in safe working environment.
  • Gained general working knowledge of safety precautions and OSHA regulations.
  • Followed all standards of rules and regulation required by OSHA.
  • Assured crew strictly followed all OSHA and corporate safety procedures.
  • Received OSHA 10 and Nuclear training while working with company
  • Keep work areas clean and safe according to OSHA.
  • Maintained proper housekeeping per OSHA standards around work area.
  • Required to uphold electrical grounding and safety IAW OSHA standards
  • Learn and follow all OSHA and NEC regulations.
  • Comply with all following OSHA safety regulations.
  • Practiced safe working techniques OSHA standards.
  • Completed OSHA 10-hour safety course certification.
  • Performed installations according to Engineer's specifications Completed OSHA's safety training and applied knowledge to all working environments
  • Verify isolation and preformed Tagout on equipment and systems according to OSHA regulations.
  • Complied with OSHA and NEC safety regulations on installations of electrical equipment, work place awareness, and safety gear.
  • Trained in latest practices, OSHA requirements, as well as the latest edition of the National Electrical Code.

Show More

34. Breaker Boxes

low Demand
Here's how Breaker Boxes is used in Electrician Helper jobs:
  • Performed rough-in installation, service entrance installation, installed switches, plugs, ceiling fans, and mounted circuit breaker boxes.
  • Assist Journeyman Electrician digging trenches, running wires, and hooking up circuit breaker boxes, substations.
  • Bend and hang conduit from breaker boxes to fixtures such as lights and switches and panels.
  • Put in receptacle dug trenches put up light poles pulled wire put up breaker boxes.
  • Use fish tape to pull wires through pipes and connecting wires into breaker boxes.
  • Experienced in commercial and residential construction jobs, including transformers and breaker boxes.
  • Build breaker boxes for naval warships to DOD specifications and ISO 9000.
  • Wired breaker boxes, make taps in junction boxes and installed fire alarms
  • Pulled wire through conduit, wired rooms and breaker boxes.
  • Install outlets and Switches and repair breaker boxes.
  • Installed devices and breaker boxes and meters.
  • Mounted breaker boxes and junction boxes.
  • Assembled and wired breaker boxes.
  • Installed breaker boxes and plugs.
  • Connect Wires in Breaker boxes.
  • Run wire, conduit, work on breaker boxes.
  • Top electrician helper: pull wire, wire up panels, breaker boxes, whatever needed to be done
  • Wire breaker boxes Oversee and supervise/mentoring other employees.
  • Mount breaker boxes, disconnects, and electric motors Fitting and welding pipe for juice pumps and rebar for concrete forms.
  • Pulled electrical cables Installed breaker boxes Running conduit Pull wire Ran cable tray

Show More

35. Construction Sites

low Demand
Here's how Construction Sites is used in Electrician Helper jobs:
  • Installed conduit and performed bending to facilitate multiple commercial and residential construction sites.
  • Assisted electricians on business and residential construction sites.
  • Assist Electricians in various electrical duties such as: Lighting setup and Non high voltage wiring at various construction sites.
  • Work is done in private and commercial businesses, private residence and in new developed and old construction sites.
  • Prepared and cleaned up construction sites; installed barricades, cones, and markers to control traffic patterns.
  • Installed wiring and electrical appliances for residential and commercial construction sites with a 40% ahead-of-schedule rate.
  • Clean and prepare construction sites also build and take apart scaffolding and other temporary constructions.
  • Performed duties in construction sites, factories, businesses, and residences.
  • Work at construction sites, factories, businesses and residences.
  • Worked on various basic housing renovations to major construction sites.
  • Structured clean or prepare construction sites to eliminate possible hazards.
  • Prepared and cleaned construction sites by removing debris Loaded and unloaded building materials used for construction.
  • Worked for a local contractor in Alamosa, CO on various construction sites.
  • Monitored inventory and reported items to be restocked for each job.Prepared and cleaned construction sites by removing debris.Pulled wire

Show More

36. Test Procedures

low Demand
Here's how Test Procedures is used in Electrician Helper jobs:
  • Performed hydraulics, communication, and navigation systems functional test procedures.
  • Conduct individual systems functional test procedures IAW engineering specs.
  • Worked with test directors to test electrical equipment using blueprints, technical manuals and test procedures to ensure adequate operational performance.
  • Used blue prints, tech manuals, sketches, test procedures, practical and theoretical knowledge to test generators and motors.
  • Ensured safety measures are observed during test procedures.
  • Maintained and operated auxilary equipment, set ip addresses, and tested signal verification tests per test procedures.

Show More

37. Electrical Boxes

low Demand
Here's how Electrical Boxes is used in Electrician Helper jobs:
  • Job included replacing conduit/electrical boxes and running wires.
  • Blue Print reading, mounting electrical boxes, devices, and termination of wires were essential tasks needed on this project.
  • Helped run conduit underground to new boxes and helped rewire grain bins and put in new electrical boxes.
  • Pulled wire, dug trenches for conduit, cut pipe, and wired basic appliances and electrical boxes
  • Assisted electrician in wiring installation: pulling wire, hanging electrical boxes in the rough out stage.
  • Pulled wire through walls and ceilings for electrical boxes, plugs, switches and fire alarms.
  • Fabricated and installed conduit, installed electrical boxes, ran wires according to electrical blueprints.
  • Assisted electricians with hanging conduit, pulling wires and wiring electrical boxes at local hospital.
  • Assisted electrician with wiring, installation of electrical boxes, circuits, and conduit pipe.
  • Helped Electricians with pulling wires, bending pipes, mounting electrical boxes.
  • Fabricated & welded supports for electrical boxes on fish farming equipment.
  • Wired from electrical boxes and outlets up to the control panels.
  • Put up electrical boxes, outlets, switches and fixtures.
  • Bend cut thread conduit run wire help wire electrical boxes.
  • Run wires, Put in electrical boxes & plugs.
  • Helped pull strip and gland cables to electrical boxes.
  • Installed electrical boxes, switches, receptacles and lighting.
  • Measure and cut wire for electrical boxes.
  • Installed electrical boxes, terminated boxes.
  • Wire up electrical boxes, run conduit, PVC, and MC.

Show More

38. Loose Connections

low Demand
Here's how Loose Connections is used in Electrician Helper jobs:
  • Examined electrical units for defects, loose connections and made necessary repairs.
  • Examine all electrical units for loose connections and make connections tighter.
  • Fix broken insulation and loose connections as quickly as possible.
  • Examine electrical units for damages or loose connections Measure, cut and bend wire and conduit.
  • Examined electrical units for loose connections and broken insulation Stripped insulation from wire ends and attached wires to terminals
  • Performed PMs(Perventive Maintenance) on Switch gear, Feeder, Service Panels to examine for any loose connections.
  • Examine electrical units for loose connections and out of order insulation and make connections tighter, using hand tools.

Show More

39. Copper-Clad Ground Rods

low Demand
Here's how Copper-Clad Ground Rods is used in Electrician Helper jobs:
  • Install copper-clad ground rods, using a manual post drivers, electrical components, equipment, or systems.
  • Install copper-clad ground rods, using a manual post driver
  • Install copper-clad ground rods, using amanual post driver.

Show More

40. Security Systems

low Demand
Here's how Security Systems is used in Electrician Helper jobs:
  • Install, repair and replace fire alarm and security systems.
  • Assisted in the installation and removal of Security Systems.
  • Bend conduit for fire and security systems.
  • Diagnosed malfunction of electrical/fire alarm/security systems and associated apparatus & component and identifying necessary repairs and recommending preventive maintenance.
  • Consisted of security systems, bakery/deli equipment installation, updating electronic department and overhaul of restroom lighting and fixtures.
  • Gained an array of experience performing installation of home automation, security systems and communication systems.

Show More

41. AC

low Demand
Here's how AC is used in Electrician Helper jobs:
  • Provided temporary general labor and maintenance assistance of new installation and existing services to military and private contractors.
  • Designed electrical conduit raceways, built electrical racks, pulled and terminated all electrical wiring.
  • Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities
  • Demonstrated problem solving skills while performing preventive maintenance on electric circuits and machinery.
  • Performed minor repairs and regular maintenance and lubrication of machines and equipment.
  • Completed shelter installations from start to finish according to customer specifications.
  • Replaced and restored platforms as project lead following massive material corrosion/damage
  • Participated in tasks ranging from commercial to residential backgrounds.
  • Assist electricians with Richmond International Raceway rewiring project.
  • Remodel of industrial machinery electrical system.
  • Helped install security packages for customers.
  • Experienced in operating heavy machinery.
  • Worked in installation of conduit and wired breaker boxes, transformers and HVAC service and repair using scissor and boom lifts.
  • Up to three story tall buildings Fabricated then shipped on a Barge to Canada to a Nickel and Cobalt Mining Facility.
  • Create waterfalls for cables to be placed, keep work area prepared for work at end of shift for next day
  • Replace and repair florescent lights and ballasts and assist electrician with wiring for City County Building and Marion County Jail.
  • Replaced breakers, fuses, switches, wires, and other electrical components, pulled wires, and bent pipes.
  • Remove and replace fixtures, plugs and switches outlet ad troubleshoot modifications and repair all types of basic circuitry.
  • Assisted main electrician in installing, repairing, replacing and maintaining electric systems, appliances, and equipment.
  • Worked hand in hand with building contractors and home owners in the design and layout of new homes.

Show More

42. Hvac

low Demand
Here's how Hvac is used in Electrician Helper jobs:
  • Assisted in estimation and installation of commercial/residential electrical work and HVAC systems to customer satisfaction.
  • Established provisioning for Fire Alarm system extension, lighting control, and supporting the HVAC system throughout the facility.
  • Performed various electrical and plumbing tasks and maintained inventory of all plumbing, HVAC and electrical supplies.
  • Repair and maintain AC, HVAC units for all City Buildings as well as plumbing repairs.
  • Assist Lead Electricians in the installation, repair, and troubleshooting of commercial HVAC equipment.
  • Assisted in the installation of disconnect box for HVAC units, and exhaust fans.
  • Assisted in some minor repairs to plumbing and HVAC systems as well.
  • Performed installation of HVAC systems including flexible tubing and sheet metal duct.
  • Worked with Electricians to repair and install HVAC units and other small appliances
  • Measured and cut conduit; HVAC control wiring
  • Install and repair HVAC, install duct work
  • Install HVAC ducting and control units.
  • Experience with HVAC wiring and installation.
  • Install and trouble shoot HVAC systems
  • Run and connect HVAC ducts.
  • Installed and serviced many different types of HVAC/R equipment commercial and residential including walk in and reach in coolers & freezers.
  • Started out working as a helper then worked my way up to an electrician and HVAC Mech.
  • Assisted journeymen with tasks such as running ground bar, installing HVACs of various tonnages, and wire pulls.
  • Bend Pipe Run Wire Terminate Control Boxes Install Controllers for HVAC Systems

Show More

43. OLD Fuse Boxes

low Demand
Here's how OLD Fuse Boxes is used in Electrician Helper jobs:
  • Replace old fuse boxes with new panels, breakers and wires that run from breaker to electrical equipment.
  • Replaced old fuse boxes and installed new lighting.
  • Replace old fuse boxes, install ceiling fans.
  • Installed, repaired and removed old fuse boxes.
  • Organized supplies to assist electrician with installing ceiling fans, repairing old fuse boxes or motors.
  • Replace old fuse boxes/Hook up appliances for power.

Show More

44. Control Panels

low Demand
Here's how Control Panels is used in Electrician Helper jobs:
  • Installed ground wire in the ground and pulling wire to control panels.
  • Wired pump motors, control panels, and installed O-cal conduit systems.
  • Assisted Electrical Technicians with maintenance of control panels, pumps and wiring.
  • Wire control panels, Trace out short circuit in wiring.
  • Assisted in building outdoor racks for power and control panels.
  • Assemble and rearrange imported control panels in switch house.
  • Add & remove breakers and wires in control panels.
  • Installed and wired control panels to provide electrical service.
  • Adjusted the various control panels in the equipment.
  • Performed wire termination to control panels and consoles.
  • Pulled and wired control panels and machinery.
  • Wired and troubleshot control panels from schematics.
  • Install electrical control panels for commercial buildings.
  • Removed old and put in new control panels
  • Wired and installed Direct Digital Control panels.
  • Install control panels and DCS.
  • Build and wire control panels.
  • Assembled, wired, and installed pump motor control panels in water and sewage pumping stations and treatment plants.
  • Installed circuit breakers, control panels along with setting up P.L.C.s(Programmable Logic Controls.
  • Installed conduit and ran the appropriate wires to control panels .

Show More

45. Alarm Systems

low Demand
Here's how Alarm Systems is used in Electrician Helper jobs:
  • Installed panels, circuits, switches, new feeders, fire alarm systems and duct banks at Patrick Air Force Base.
  • Installed lights, power wiring, recorder, alarm systems, switchboards, panels and control devices.
  • Install transformers circuit breakers, disconnects, lights, rough in fire alarm systems and pull wire.
  • Work included Fire Alarm Systems, X-Ray Rooms, OR Rooms, and Lighting and Distribution panels.
  • Installed conduit, breaker boxes, fire alarm systems, intercom systems, and security systems.
  • Mounted breaker boxes, fire alarm systems, sensors, and light fixtures.
  • Installed rough and finish wiring in industrial and commercial fire alarm systems.
  • Installed fire, lighting, and alarm systems for commercial buildings.
  • Install receptacles, switches, fire alarm systems and light fixtures.
  • Assisted electricians in troubleshooting alarm systems, lighting systems, etc.
  • Installed burglar and fire alarm systems various schools and business.
  • Installed generators, ground fields, and alarm systems.
  • Reworked fire alarm systems, installed B2 fixtures.
  • Wire fixtures, alarm systems and motion sensors.
  • Run test on alarm systems.
  • Assisted electricians in the construction of various commercial electrical systems Assisted electricians in the installation of low voltage fire alarm systems
  • Maintained and tested and installed zone and adressable fire alarm systems.
  • Installed Fire Alarm Systems for commerical buildings also Troubleshoot and repair Electrical Systems in a timely manner.
  • Perform electrical installation for major projects Install fire alarm systems Managed distribution of supplies and material Operate heavy machinery

Show More

46. Electrical Services

low Demand
Here's how Electrical Services is used in Electrician Helper jobs:
  • Provide electrical services to industrial, residential and commercial facilities.
  • Experience in residential, commercial and industrial electrical services.
  • Installed electrical services in residential houses and commercial building.
  • Full TimeDuties: Performed residential and commercial electrical services.
  • Installed wiring, fixtures, and equipment for all electrical services in commercial construction projects, following blueprints and wiring diagrams.
  • Install new electrical services in plant; Maintenance of existing instrumentation panels; Maintenance of plant electoral systems.
  • Implemented residential and commercial electrical services for new and existing locations, both high and low voltage.
  • Assisted in the installation and final hook up of electrical services in private residences and buildings.
  • Assist in wiring and installation of electrical services and fixtures in residences and commercial properties.
  • Helped electrician rough in new electrical services, as well as repair old work.
  • Assist senior electrician(s) in commercial installation of electrical services.
  • Assigned to C and J Electrical Services, LLC.
  • Excavated for theplacement of underground electrical services.
  • Repaired and upgraded electrical services.
  • Job responsibilities: All phases of Commercial Electrical services.
  • performed construction build out on units and installed electrical services * Worked on single family housing projects in Fort Morgan AL.

Show More

47. Scissor Lifts

low Demand
Here's how Scissor Lifts is used in Electrician Helper jobs:
  • Operated and serviced various machinery to include; forklift, bobcats, pallet jack and scissor lifts.
  • Worked with power tools, forklifts, scissor lifts, plant, grouting and more.
  • Work off of ladders, boom and scissor lifts when required.
  • Experience with running boom lifts and scissor lifts.
  • Trained operator of boom and scissor lifts.
  • Can operate scissor lifts and Boom lifts.
  • Operated equipment such as Scissor Lifts.
  • Worked fork lifts and scissor lifts.
  • Operate scissor lifts and forklift.
  • Use scissor lifts, man lifts, bucket trucks, and a lull forklift.
  • Operated boom lifts, scissor lifts, back hoes, trenches and bucket trucks.
  • Operate fork lifts, boom lifts, scissor lifts.
  • Scissor Lifts, Follow Directions and working without supervision.
  • Worked from ladders, scaffoldings, and scissor lifts
  • use high lifters, scissor lifts
  • Assisted in wiring industrial buildings Pulled cable and wire through cable trays Installed transformers Operated scissor lifts Assisted in plant shut-downs

Show More

48. Sound Systems

low Demand
Here's how Sound Systems is used in Electrician Helper jobs:
  • Surround sound systems setup such asHDTV's, soundbars, blue ray players, DVD players, wireless subwoofers, amplifiers.

Show More

49. Solar Panels

low Demand
Here's how Solar Panels is used in Electrician Helper jobs:
  • Participated in mounting of solar panels, wire trays and combiners on rooftops.
  • Assisted electricians in wiring solar panels and other duties as assigned.
  • Set up, installed, tested and completed solar panels.
  • Install structures needed to mount industrial grade solar panels.
  • Install solar panels throughout the state of North Carolina
  • Performed module wire connections on solar panels.
  • Trained to put up solar panels.
  • Instill harnesses on the solar panels.
  • Run wire for solar panels2.
  • Use hand and power tools to build racks and mounts for solar panels, inverters, and breaker boxes.
  • Assisted head electrician with building and wiring solar panels, wiring inverters and transformers, managing tools and supplies.
  • Assisted Electrician with all needs Wire pulls and proper alignment of solar panels
  • Wired solar panels to DC to AC Inverters.
  • Plug and Play Of Solar Panels-wire managment
  • Power to Solar Panels Help install motors, Combiner Boxes, and Inverters Help terminate motors, Combiner Boxes, and Inverters
  • Carry solar panels onto top of roof.Cut, solder, wire to fixtures and panel boxes.Pull Wire to various rooms.
  • String source wire on the solar panels and to the combiner boxes.Q/APolarity testing
  • wired and set up solar panels, wired and set flow meters.Reason for leavingLaid off due to a cut back in hours
  • Install and service solar panels Build and wire solar panels Troubleshoot any wiring issues Residential wiring - new work/old work
  • Installed Solar Panels Pull cable Cable Tray Install boxes Termination Installed electrical receptacle box Install Ground

Show More

20 Most Common Skill for an Electrician Helper

RUN Conduit30.7%
Electrical Systems10.9%
Hand Tools7.5%
Light Fixtures6.8%
Receptacles6%
Conduit Ends3.8%
Faulty Circuit Breakers3.4%
Defective Electrical Equipment3.4%

Typical Skill-Sets Required For An Electrician Helper

RankSkillPercentage of ResumesPercentage
1
1
RUN Conduit
RUN Conduit
24.4%
24.4%
2
2
Electrical Systems
Electrical Systems
8.7%
8.7%
3
3
Hand Tools
Hand Tools
6%
6%
4
4
Light Fixtures
Light Fixtures
5.4%
5.4%
5
5
Receptacles
Receptacles
4.8%
4.8%
6
6
Conduit Ends
Conduit Ends
3%
3%
7
7
Faulty Circuit Breakers
Faulty Circuit Breakers
2.7%
2.7%
8
8
Defective Electrical Equipment
Defective Electrical Equipment
2.7%
2.7%
9
9
Wire Ends
Wire Ends
2.5%
2.5%
10
10
Electrical Units
Electrical Units
2.4%
2.4%
11
11
EMT
EMT
2.2%
2.2%
12
12
PVC
PVC
2%
2%
13
13
Test Meter
Test Meter
1.9%
1.9%
14
14
Job Site
Job Site
1.8%
1.8%
15
15
Electrical Outlets
Electrical Outlets
1.8%
1.8%
16
16
New Construction
New Construction
1.8%
1.8%
17
17
Strip Insulation
Strip Insulation
1.7%
1.7%
18
18
Trouble Shooting
Trouble Shooting
1.4%
1.4%
19
19
Attach Wires
Attach Wires
1.4%
1.4%
20
20
Switch Panels
Switch Panels
1.1%
1.1%
21
21
Conduit Fittings
Conduit Fittings
1.1%
1.1%
22
22
Connection Boxes
Connection Boxes
1.1%
1.1%
23
23
Conduit Support Brackets
Conduit Support Brackets
1.1%
1.1%
24
24
MC
MC
1%
1%
25
25
Electrical Wire
Electrical Wire
1%
1%
26
26
Circuit Breakers
Circuit Breakers
1%
1%
27
27
Drill Press
Drill Press
1%
1%
28
28
High Voltage
High Voltage
0.9%
0.9%
29
29
Service Calls
Service Calls
0.9%
0.9%
30
30
Wire Strippers
Wire Strippers
0.8%
0.8%
31
31
Reassemble Equipment
Reassemble Equipment
0.7%
0.7%
32
32
Residential Homes
Residential Homes
0.7%
0.7%
33
33
Osha
Osha
0.7%
0.7%
34
34
Breaker Boxes
Breaker Boxes
0.6%
0.6%
35
35
Construction Sites
Construction Sites
0.6%
0.6%
36
36
Test Procedures
Test Procedures
0.6%
0.6%
37
37
Electrical Boxes
Electrical Boxes
0.6%
0.6%
38
38
Loose Connections
Loose Connections
0.6%
0.6%
39
39
Copper-Clad Ground Rods
Copper-Clad Ground Rods
0.6%
0.6%
40
40
Security Systems
Security Systems
0.5%
0.5%
41
41
AC
AC
0.5%
0.5%
42
42
Hvac
Hvac
0.5%
0.5%
43
43
OLD Fuse Boxes
OLD Fuse Boxes
0.5%
0.5%
44
44
Control Panels
Control Panels
0.5%
0.5%
45
45
Alarm Systems
Alarm Systems
0.5%
0.5%
46
46
Electrical Services
Electrical Services
0.4%
0.4%
47
47
Scissor Lifts
Scissor Lifts
0.4%
0.4%
48
48
Sound Systems
Sound Systems
0.4%
0.4%
49
49
Solar Panels
Solar Panels
0.4%
0.4%

7,567 Electrician Helper Jobs

Where do you want to work?