Electrician jobs in Jonesboro, AR - 824 jobs

CompanyFederal Reserve Bank of Kansas CitySeeking a Master Electrician with project management experience to work in an owner-occupied facility. Candidate must be highly self-motivated and flexible in job assignments. Must be familiar with 13,200v primary distribution systems and 480v through 120v low voltage systems. Familiarity with medium voltage switchgear is required. Key Activities: Project Management/Coordination: Coordinates and provides leadership for all phases of various facilities-related projects performed by coworkers and outside contractors. These may include, but not to be limited to, construction projects involving building structure maintenance, electrical projects, pipefitting-related projects, or installation of new equipment and mechanical systems. Preventative Maintenance & Repairs: Perform routine, emergency, preventive maintenance and operational assignments relating to operation and/or maintenance of medium voltage distribution systems. Performs highly complex repair and maintenance of various systems and related equipment independently. Experience with medium voltage switchgear (13,200 volt) and double ended substations (480v) maintenance and service preferred. Experience with automatic transfer switches (480v), uninterrupted power supply (UPS), static transfer switches (STS). Inspect/monitor/troubleshoot building systems. Includes in-depth knowledge of specialized testing and diagnostic equipment to troubleshoot electrical related issues in a commercial or industrial setting. Customer Service/Work Requests: Communicates with customer, project manager or facilities support staff, as appropriate, regarding status of project or work requests. Works collaboratively with other trades and design/project management team. Training/Guidance: Provides guidance and training to other technicians and ensures minimal disruptions to daily operations during the facilities related projects. Provides guidance to technical staff in other trades on safe electrical work practices. Contract Development & Management: Provides input for developing RFPs where significant technical expertise in several areas is necessary. Budget: Collaborates with lead to develop project budgets and estimates. Qualifications: High school diploma or equivalent. Typically requires at least 5 years of relevant experience. A minimum of 3 years industry experience with a Master Electrician level - Kansas City Missouri license preferred with experience in commercial and/or industrial electrical work. Strong knowledge of NFPA 70E, electrical safety requirements, including arc flash personal safety requirements. Experience leading project teams, supervising contract work, and developing written work instructions. Experience with project estimating preferred. Good computer skills - proficient with Microsoft Office suite, internet application, email. Proficient at operating all computer equipment associated with assigned equipment or systems. Possess good writing and critical thinking skills. Must be able to originate instruction documents that can be used by other technicians to perform preventive maintenance or verify electrical system operation. Proficiency with floor plans and line drawings. Understanding of manufacturer's equipment manuals and operational instructions. Ability to multitask and use time efficiently to meet project deadlines. Team member with strong oral and written communication skills. Comfortable working on ladders and lifts. Ability to lift at least 50 lbs. Valid driver's license with acceptable driving record required. Additional Information: Location(s): Fully Onsite: Yes Location(s):Kansas City, MO Remote Only Eligible: No Salary: The starting pay range for this position is $71,600 to $87,600 for the job level(s) required for this position. Final offers are determined by factors including the candidate's qualifications, internal alignment considerations, district assignment, and geographic location. Work Shift: While the typical schedule for this position is anticipated to be 7:00 A.M. to 3:30 P.M. Monday through Friday, flexibility to adjust to different shifts is necessary. Some overtime is required when performing or overseeing the performance of preventive and predictive maintenance on electrical distribution equipment and in projects performed for internal customers. Sponsorship: Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future. About Us: Total Rewards & Benefits Who We Are What We Do Follow us on LinkedIn, Instagram, X (formerly Twitter), and YouTube Full Time / Part TimeFull time Regular / TemporaryRegularJob Exempt (Yes / No) NoJob CategoryFacilities/Real Estate Family GroupWork ShiftFirst (United States of America) The Federal Reserve Banks are committed to equal employment opportunity for employees and job applicants in compliance with applicable law and to an environment where employees are valued for their differences. Always verify and apply to jobs on Federal Reserve System Careers (FRS) or through verified Federal Reserve Bank social media channels. Privacy Notice

Inspire health. Serve with compassion. Be the difference. Repairs and maintains electrical systems, motor control centers, panel boards, and other electrical and mechanical equipment. Essential Functions All team members are expected to be knowledgeable and compliant with Prisma Health's values: Inspire health. Serve with compassion. Be the difference. Tests and maintains the emergency generators and emergency power systems on a weekly basis and documents all test results. Repairs and maintains fire alarm and fire sprinkler systems. Performs scheduled tests to comply with JCAHO, DHEC, and other standards. Attends training to achieve 90% attendance as required by JCAHO. Performs preventive maintenance on assigned equipment and records appropriately. Detects repairs necessary, implements repair request and recommends PM frequency changes, additions, deletions to PM schedule. Repairs nurse call systems, surgical lights, automatic door controls, and food service equipment. Mounts motors, transformers, and lighting fixtures into position and completed circuits according to diagram specifications. Maintains, installs, replaces, and tests electrical circuits, equipment and appliances using appropriate tools and testing instruments. Performs other duties as assigned. Minimum Requirements Education - High School diploma or equivalent OR post-high school diploma/highest degree earned Experience - Five (5) years of electrical experience In Lieu Of NA Required Certifications, Registrations, Licenses Master or Journeyman License - Preferred Knowledge, Skills and Abilities Working knowledge of electrical coding requirements. Knowledge of office equipment (fax/copier) Proficient computer skills (word processing) Mathematical skills Effective at data conversion Capable of assisting with other engineering trades such as mechanical and maintenance technicians. Participate or is a member of professional organizations within the field preferred Work Shift Day (United States of America) Location Blount Memorial Hospital Facility 8001 Blount Memorial Hospital, Inc. Department 80018300 Plant Operations Share your talent with us! Our vision is simple: to transform healthcare for the benefits of the communities we serve. The transformation of healthcare requires talented individuals in every role here at Prisma Health.

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Job Description Must be at least 21 years of age. Prior experience required. Must be able to identify all colors and use hand and power tools. Must be able to stand and walk for extended periods of time throughout shift. Must be able to climb ladders, bend, stoop, kneel, and work in confined spaces. May be exposed to extreme temperatures when working on exterior equipment or systems. Must have excellent communication skills. Must be able to Additional Information Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Successful candidates must reside or be willing to relocate at their own expense to live within 30 minutes of headquarters. Position will be filled as an Apprentice Lineman or Lineman depending on the qualifications, experience and skills of the successful candidate. This position will report to Laurel, MS. This position will be covered by the Memorandum of Agreement between Mississippi Power and the International Brotherhood of Electrical Workers Job Summary This position will be filled as a Journeyman Lineman or Apprentice Lineman depending on the applicant's qualifications. This position is responsible for working in a line crew on overhead and underground construction and maintenance of distribution systems. This position is responsible for responding to and correcting problems with the electrical distribution system during normal working hours, after hours, nights, weekends and holidays. Job Responsibilities Candidate must safely perform any work normally or reasonably required in this classification. This position builds, maintains, inspects, trouble-shoots, replaces, and repairs distribution power lines, poles, and related equipment according to Company specifications and manufacturer's recommendations. Successful candidate will review work orders and determine material needed to complete jobs; along with being able to safely load wire coils, poles, equipment, and materials onto trucks. Candidate is responsible for using hand tools to assemble materials, connectors, brackets, and other equipment in preparation for installation on pole-lines or underground systems. This position frequently works aerially from a ladder, lift bucket, and pole-climbing tools to remove/replace/repair equipment. Successful candidate must climb utility poles and other structures. This position is responsible for cleaning and maintaining tools/trucks. Successful candidate must maintain regular attendance and comply with all safety procedures, practices and requirements. Candidate must be able to effectively communicate in person, by radio, and by phone to various company personnel in the normal course of duties. If this position is filled as an apprentice, the applicant will complete a prescribed Journeyman Development Program. Job Requirements Must pass or have passed the Construction and Skills Trade Test (CAST) in order to be considered Must currently have or possess the ability to obtain a valid Mississippi Commercial Drivers license within 6 months of employment Must maintain weight to comply with equipment manufacturer's restrictions Must be available for call out overtime work, scheduled overtime work, and overnight travel as needed Availability for timely response to call outs are required The successful applicant must currently live within or be willing to relocate to within a 30 minute commute from the assigned headquarters office. No relocation assistance available. Knowledge, Skills & Abilities Candidates should have a comprehensive knowledge of customer relation skills and the ability to think clearly and make logical decisions under pressure. Average or above average computer skills are desired. Working knowledge of electricity and the maintenance of electrical lines is necessary. Ability to operate machinery and vehicles, use basic hand tools, the ability to work at heights, climb tall structures, read blueprints, lift, carry and pull heavy objects. Ability to work in extreme weather conditions and work in enclosed, dark areas Work methods must adhere to all safe work practices and must possess the ability to build solid interpersonal relationships with other employees Other Requirements In order for the applicant to be hired as a journeyman lineman, 5 years distribution line crew experience is preferred. Behavioral Attributes Exhibit Our Values behaviors of safety first, unquestionable trust, superior performance, and total commitment. Ability to work successfully in a team atmosphere. Successful candidate must be ethical, customer oriented, self-motivated, a continuous learner and highly dependable. Other Please submit an updated resume with your application If you are selected to take the CAST test required for this position, you will be notified via e-mail.

A well-established Kansas City contractor is hiring for an experienced Electrician to join our team. The Electrician will be responsible for installs and services of electrical systems, observing company safety guidelines, documenting each project and updating client records, providing material cost and time estimates, and training apprentices. You should also be able to easily diagnose electrical faults and provide excellent customer service. Learn more about us at: ********************************** Responsibilities: Ensure that workmanship adheres to industry standards of quality, safety and best practices Understand, interpret and build to project documents and schematics Demonstrate and uphold company policies, safety program and core values Report job status daily to project management team Complete as-built documentation, i.e. red-lines, photos and test results Utilize basic computer and email functions Skills: A minimum of 1-2 years of Residential and/or Commercial experience Extremely reliable and punctual Strong work ethic and high level of craftsmanship Technically proficient with strong problem-solving ability Demonstrate ability to effectively manage personnel, tools, materials and company resources Team player with strong organizational and leadership skills Professional appearance and effective communication skills Drug-Fee Must Have On Hand Tools Tools Salary and Benefits Full time Salary: $55,000 - $65,000 Depending on Experience/Ability Level Vacation and Holidays Pay 100% Paid Health/Dental/Vision Retirement Plan with 100% match of first 3% contributed Profit Sharing Plan Pathways for Upward mobility and Achieving up to $120,000 per year

Were seeking skilled Electricians for exciting projects in select cities across the US. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Salary Range: $25 - $35 per hour Benefits: Paid Time Off Medical Retirement Heres what Skillit needs from you: Have strong electrician skills Ability to read and interpret documents such as safety regulations, operation and maintenance instructions, and procedure manuals Ability to work with tools, such as, power and non-powered hand tools Willing and able to follow instructions and ask clarifying questions Ability to handle materials that can weigh up to 200Ibs Strong attention to detail Heres what youll be doing: Perform skilled work in maintenance, repair and construction of lighting and power as part of the electrical jobs. Ability to control electrical systems in a responsible and accurate manner. Perform complex electrical tasks, including wiring, conduit sizing and switchgear installation. Install and terminate bus feeders, motors, and controls, ensuring compliance with safety codes. Troubleshoot and repair energized circuits and electrical equipment. Supervise rough-ins, underground layouts, and installation preparation. Read and interpret blueprints and control wiring diagrams for installation planning. Possess the ability to understand construction and repairs from drawings or sketches, estimate materials, supplies and labor costs. RequiredPreferredJob Industries Other

Company Introduction: Over 90 years of quality products and superior service. Install, maintain and repair equipment which requires general electrical system knowledge and troubleshooting abilities. Use of hand, power, and measuring tools needed to repair and troubleshoot equipment. Perform welding, and general maintenance repair practices to maintain plant fixed and mobile equipment. Plant equipment includes a jaw crusher, cone crushers, roll crushers, impact crushers, bucket elevators, conveyor belts, rotary dryers and kilns, wire and rubber screens, rotary screw air compressors, dust collectors, slurry pumps, polyethylene pipe and other rock processing equipment. Ensure safe operation and repair activities during shift and coordinate operation downtime and maintenance needs with the Maintenance Supervisor and Superintendent. PRIMARY RESPONSIBILITIES. 1. Inspect equipment (tools, cranes and mobile equipment) and work area for hazards and document inspection. Keep the work area and equipment clean and orderly. 2. Install, maintain and repair equipment such as motors, panels, generating equipment, lighting circuits, communication systems, elevators, cranes, hoists, heating units, control units, and other related equipment using A.C. and D.C. current ranging from low to high voltage. 3. Install conduit and light structural steel brackets and frame work for mountings. 4. Read blueprints, schematics and wiring diagrams. Use hand, power and measuring tools. 5. Use test apparatus. Use soldering equipment. 6. Diagnose and correct trouble in electrical and electronic units and controls. 7. Repair and maintain recording and control instruments. 8. Climb poles to string lines and make repairs. 9. Diagnose, troubleshoot circuits and change fuses. 10. Perform rough welding and burning in connection with electrical equipment, installation, maintenance and repair. 11. Analyze various types of drawings and wiring diagrams in order to locate and install circuits and equipment. 12. Determine material or replacement needs and select a logical approach to trouble shooting and repair adjust equipment for safe and proper operation. 13. On occasion, operate bench drill, pipe or bolt machines, grinding equipment and power saw. 14. Perform drying, baking, winding and varnishing duties as required to repair motors. 15. Install and maintain telephone and inter-com systems. 16. Operate mobile equipment such as forklifts, trucks and cranes as needed. 17. Keep work area and equipment neat and clean. 18. Report needed maintenance and repairs to supervision. 19. Record repair information on work order document and communicate to supervisor. 20. Perform other duties as required and assigned as outlined in Article V, and other Sections, of the ISP Minerals and United Steelworkers Local 7033 Labor Contract. ADDITIONAL RESPONSIBILITIES Knowledge of proper disposition of unsuitable materials. Knowledge of quality control standards. KNOWLEDGE AND SKILL REQUIREMENTS Proficient in industrial electrical repair and installation. Must have the ability to weld and demonstrate knowledge of electrical and mechanical aptitude. Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent. Knowledge of the manufacturing processes, procedures, and machinery. This is normally acquired through one to two years of experience. Manual dexterity required for operating machinery. Ability to lift up to 50 pounds required. Ability to climb stairs, ladders, and walk extensively throughout the plant. Ability to wear respiratory protection. Ability to operate crushing and conveying equipment and other mobile equipment (haul trucks, pickups, forklifts, loaders) Ability to work in outdoor environments (heat and cold) WORKING CONDITIONS 1. Walking 2. Climbing (ladders and stairways) 3. Driving and operation of mobile equipment 4. Lifting (up to 50 # - frequently (floor to waist)) 5. Working from heights 6. Wear a Respirator and other required PPE (Fall Protection) 7. Work in outside environment 8. Working in awkward positions for extended periods of time. Such as bent at waist, squatting, sitting on knees or laying down. Work may require arms to be elevated above shoulders for extended periods. 9. Operation of a variety of hand tools powered by pneumatic, electric or hydraulic pressure as well as cutting torches and welders. Working conditions are normal for a Mine / Mill manufacturing environment. Environment consists of a variety of Rock Crushing, Screening and conveying equipment. Work involves lifting of materials and product up to 50 pounds. Machinery operation requires the use of safety equipment to include but not limited to; eye safety glasses, respirators, hearing protectors, work boots, and hardhats. Loose fitting clothes and jewelry are not permitted. At Specialty Granules LLC , we believe our employees are our greatest resource. We offer competitive salary, benefits, and vacation package for all full-time permanent positions. Must be eligible to work in the U.S. without need for employer-sponsored visa (work permit). If you are currently an SGI employee, please do not apply here. Please apply through the "Jobs Hub" section, which can be accessed under your Apps in Workday. SGI is proud to be an equal opportunity workplace and is committed to a policy of equal treatment and opportunity in every aspect of our recruitment and hiring process, regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, veteran status, or any other characteristic protected by law. SGI complies with federal, state, and local disability laws and makes reasonable accommodations for applicants and employees with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact HR Services at 833-HR-XPERT.

Electrician Kalmbach Feeds, Inc. - Competitive pay, full benefits, and 3 weeks paid time off in your first year! About the Role As a Maintenance Technician/Electrician at Kalmbach Feeds, you will be responsible for keeping our feed manufacturing equipment and facilities in top working order. This position requires expertise in both mechanical and electrical fields - from repairing machinery and welding to troubleshooting PLCs, wiring, and 3-phase systems. The right candidate will be proactive, safety-minded, and able to balance immediate repair needs with long-term preventative maintenance. This role is hands-on and requires collaboration across departments to ensure the plant runs safely and efficiently. Key ResponsibilitiesElectrical Troubleshoot wiring, controls, and PLCs. Install, diagnose, repair, and maintain electrical systems and production equipment. Read and interpret electrical prints and schematics. Work with 3-phase electric systems. Ensure electrical safety and compliance with OSHA standards. Mechanical/General Maintenance Perform preventative maintenance (lubrication, inspection, adjustments, etc.) on machinery and equipment. Repair, replace, remove, or modify manufacturing structures and mechanical components. Conduct welding, plumbing, metal fabrication, and other industrial trade tasks as needed. Install and maintain conveyors, motors, and plant systems. Inspect and evaluate parts and materials for performance and useful life. Operate tow motors, pallet jacks, aerial lifts, and other shop equipment. Maintain accurate daily records of all work in the computerized maintenance management system. Keep work areas, tools, and equipment clean, organized, and safe. Other Duties Support plant safety by maintaining a safe work environment. Gather and transport project materials, parts, and tools. Perform corrective maintenance and other duties as needed. Qualifications High school diploma or GED required; Associate degree in a related trade preferred. Minimum 3 years of maintenance experience in a manufacturing environment (5 years preferred). Demonstrated experience in both mechanical and electrical trades. Strong knowledge of PLC troubleshooting (required). Full understanding of 3-phase electric. Ability to read and interpret electrical prints. Basic welding experience. State of Ohio boiler certification preferred. Valid driver's license with no suspensions. Ability to lift at least 50 lbs, work on raised platforms, and operate in dusty or outdoor environments. Willingness to work weekends, overtime, and variable shifts. Ability to wear a full-face respirator and pass pulmonary testing. Demonstrated sense of urgency, strong problem-solving, and ability to manage multiple priorities. What You'll Enjoy Competitive compensation Medical, Dental, and Vision Insurance (eligibility on date of hire) Company-paid Life Insurance, Short-Term, and Long-Term Disability 401(K) (traditional and Roth options) with generous company match 3 weeks paid time off in your first year Medical and Dependent Care Reimbursement Plans Access to company-owned beach condo in Fort Myers, FL On-staff life coach Opportunities to grow within a supportive, team-oriented environment About Kalmbach Feeds Kalmbach Feeds has been providing the highest quality nutritional products for livestock, poultry, and companion animals since 1963. Founded by Milton and Ruth Kalmbach, the company is guided by traditional core values and a commitment to delivering the best possible nutritional value. Today, Kalmbach is a regional leader in the animal nutrition industry, recognized for quality, integrity, and innovation. Learn more at ********************* or view our culture video at YouTube. Additional Information Pre-employment drug screen (hair and urine), physical, and background check required. Each applicant is considered solely based on qualifications, without regard to race, color, religion, sex, age, disability, national origin, veteran status, or any other classification protected by law.

Welcome to a phenomenal opportunity as an electrical maintenance technician. With great pay and a newer facility (only 8 years old and over one billion dollars in upcoming additions) along with advancement opportunity, this is truly a great opportunity. The Maintenance Technician Electrical job is a core component for our maintenance forces and requires a trained and experienced individual to continue our success as one of the world's largest steel producers. The Maintenance Technician Electrical performs all electrical maintenance functions necessary to maintain all operating and service equipment using standard and specialized tools and equipment including mobile equipment, pendant and overhead cranes and forklifts. As a Maintenance Technician Electrical, you will install, maintain, repair, and operate a broad range of electrical systems and electrical equipment in a heavy industrial environment to maintain continuous operations. Job Responsibilities: Troubleshoot, install, maintain, and repair a broad range of electrical and electronic systems and equipment using schematics, AC/DC systems, and PLC's. (they will train you on PLCs and other platforms; they just need to hear that you have a hunger and ability to learn new technologies). Provide assistance in operating functions as necessary. May work alone with minimal supervision or with other maintenance technicians. Work in various areas of the plant locations is required. The environment is typical for a steel mill production area, with extreme temperatures, high noise levels, and dusty/greasy areas. Physically demanding work with be required. Hours are 4, 12 hour shifts that rotate between days and nights with 4 days off in between. This results in working some weekends/holidays and built in overtime. Requirements1. Demonstrated safety focus and willingness to apply it in a team environment proactively 2. Quality and detail oriented with strong technical and analytical problem solving skills 3. Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge 4. Reliable team player with good communication skills 5. Highly motivated, self -directed, and willing to put in extra hours when needed 6. Demonstrated proficiency using precision measuring instruments 7. Experienced with mobile equipment. ( Rough Terrain, Man Lift, Fork Lift Carry Deck or Broaderson) 8. Efficient in the Metric Measuring System a plus 9. Basic computer skills; MS Excel, Word, and Outlook is a plus 10. Read Electrical drawings, blueprints, diagrams and schematic drawings to determine work procedures 11. Knowledgeable of programming and troubleshooting logic to include ladder logic, function block programming 12. Knowledgeable of VFDs, principle design, programming, and trouble shooting skills; I.O. systems and design layout; three -phase motors and ability to troubleshoot; network infrastructure; basic mechanical components in a mill; basic Hydraulic systems, how they operate and design layout 13. Willing to learn and take on multiple roles, such as mechanical and production positions as well as continually improve on primary skill set 14. HS diploma or equivalent is required; electrical degree or training is preferred BenefitsFull benefits Package - Details to follow

Job Description: ElectricianThe Electrician installs and repairs wiring, fixtures, and equipment for all electrical services aboard vessels and within the facility. Pay: $28.00Day Shift Interpret and follow blueprints, schematics, and wiring diagrams. Install conduit to bulkheads using brackets and screws, then thread wires through conduit to terminals such as connection boxes, circuit breakers, voltage regulators, and switch panels. Connect power-supply circuits to systems including radio, radar, sonar, fire control, and other onboard electronic equipment. Test electrical characteristics-such as voltage, resistance, and phase angle-within circuits using meters and indicators. Construct and install instrument panels using hand tools, rulers, dividers, and power drills according to specifications. Knowledge, Skills, and Abilities • Ability to read and interpret blueprints, drawings, and electrical schematics is preferred. • Strong understanding of marine electrical systems and components. Experience • Prior experience as an electrician is required. • 3+ years of experience in an industrial or shipyard environment. Safety & Environmental Factors: All employees are expected to adhere to the company's safety policies to maintain a safe and healthy work environment. This role involves working under extreme hot or cold conditions and requires the physical ability to stand for the entire shift, use hands for various tasks, ascend stairs, balance, stoop, kneel, crouch, talk, and hear. Team members must occasionally lift items weighing up to 50 lbs. Specific vision abilities required include close, distant, and peripheral vision, depth perception, and the ability to focus. BenefitsAs part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: Medical Coverage Dental Coverage Vision Coverage Short Term Disability Benefits Term Life Benefits * Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. #TLRS #ZR

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Amteck is currently looking to hire Arkansas Journeyman Licensed Electricians for work located in northeastern AR in our Service Dept. This position typically works 4 10 hour shifts with the possibility of overtime. A Journeyman License in the state of Arkansas is REQUIRED for this position We offer long-term opportunities as well as steady work, benefits and a 401K. We are looking for people who are interested in working with a company that promotes growth and longevity within the trade. You will have the ability to diversify your electrical skill set with being able to learn others within Amteck. We have training for low voltage, fire alarm, controls, and instrumentation among other skill sets. Apply today to learn more about the opportunity! What we are looking for: Active Arkansas Journeyman Electrician License 5+ years of electrical experience on commercial or industrial sites Ability to install conduit, wire and cable systems as required Ability to read and interpret blueprints Ability to install and terminate panels, switchboards and other electrical equipment Ability to troubleshoot and perform repairs on faulty circuits, equipment or systems Control experience is a plus Ability to effectively lead 1-3 team members OSHA10 preferred but not required I n 1977 Amteck was founded in Central Kentucky with the belief that growth only comes by listening and responding to both clients and employees. Four decades later, Amteck has grown from a small electrical contracting firm to a national leader in the design/build support electrical contracting industry. Amteck specializes in facility growth expansion initiatives of companies that operate in the manufacturing, industrial, process, food, and beverage, hospitality, healthcare, distribution facilities, and commercial and institutional sectors. The number one goal is the Safety of our Employees and maintaining our culture and core values: THE AMTECK WAY - SAFETY, QUALITY, & CUSTOMER SATISFACTION. If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

You may not know our name, but you know our products. What we make is part the places where we live, work and play - all day, everyday. Zekelman is a family of companies - 100% domestic manufacturers - with a legacy dating back to 1877. We're proud to be the largest independent steel pipe and tube manufacturer in North America and the leading innovator in multi-family housing development. We believe in what we build and what we build, builds the world around us. Hospitals, hotels, schools, bridges, airports and more. Come build a career you believe in. Master ElectricianAbout the Role As a Master Electrician at Wheatland Tube, a division of Zekelman Industries, in Blytheville, AR, you will play a key role in maintaining and repairing electrical systems that power our production operations. You'll ensure equipment runs safely, efficiently, and at optimal performance to support quality, uptime, and yield goals. This role is ideal for someone who excels in troubleshooting, problem-solving, and applying advanced electrical knowledge in a fast-paced industrial environment. Shift: 2nd Shift - Either 4:00 PM - 2:00 AM or 6:00 PM to 6:00 AM Pay: Competitive, based on experience What You'll Do Maintain and repair electrical systems and production equipment to ensure safe and continuous operation. Follow all electrical safety procedures and LOTO rules, ensuring guards and safety devices are in place before equipment operation. Read and interpret blueprints, manuals, and schematics to troubleshoot and repair complex electrical and mechanical issues. Utilize hand tools, power tools, testing instruments, cranes, and hoists to perform maintenance tasks effectively. Conduct preventive maintenance and perform electrical tasks related to breakdowns, changeovers, and repairs. Inspect and monitor equipment performance using manual and computerized maintenance management systems. Troubleshoot process and electrical issues to identify root causes and implement corrective actions. Maintain clean and audit-ready work areas and ensure housekeeping standards are met after each task. Comply with all safety, PPE, and environmental regulations including OSHA, EEO, and company standards. Collaborate with supervisors and team members to report and resolve any operational or safety concerns. Who You Are 3+ years of electrical experience, preferably in an industrial or manufacturing environment. Journeyman or Master Electrician certification preferred. High school diploma or equivalent required. Proficient in PLCs and control systems, with strong troubleshooting skills. Ability to read electrical schematics and technical drawings. Competent with computers and maintenance management systems. Excellent problem-solving and communication skills. Physical Abilities Ability to stand, walk, bend, climb, push, and pull for extended periods. Must be able to lift up to 60 lbs. Comfortable working in an industrial environment with exposure to noise, fumes, and moving mechanical parts. Regular, full-time, on-site attendance is an essential function of this role. What You'll Get Zekelman Industries offers competitive compensation and excellent benefits, including low-cost, high-quality medical and dental benefits. In addition, we have an amazing tuition assistance program, a bonus plan, a 401(k) plan with a generous company match, loyalty awards, and much more: Competitive Compensation Bonus Plan & Profit-Sharing Opportunities 401(k) with Company Match Comprehensive Health, Dental & Vision Insurance Tuition Assistance Program Paid Vacation & Holidays Employee Loyalty Awards Zekelman Industries offers competitive compensation and excellent benefits, including low-cost, high-quality medical and dental benefits. In addition, we have an amazing tuition assistance program, a bonus plan, a 401(k) plan with a generous company match, immediate vesting, and much more. M/F/D/V We are Zekelman Industries. We manufacture superior quality tubular and related products, and provide outstanding service for our valued customers. We seek to continuously advance the skills and opportunities of our employees, utilizing the latest technology and management tools available to consistently increase profitability and the enterprise value of Zekelman Industries and of our customers.

To install, maintain and repair routine electrical systems, facilities, appliances, and related equipment, including both high and low voltage systems Employees hired into Intermittent positions are limited to working no more than 720 hours per fiscal year. Salary Grade: ELC-1 Please see Staff Compensation Structure or Skilled Crafts and Service Maintenance Compensation Schedule for salary ranges. For salary grade UC, these positions are "Unclassified" and salary ranges are determined by the hiring department. Essential Duties and Responsibilities: 1. Installs, maintains and repairs wiring for all electrical systems, including but not limited to power distribution, conduit, lighting, motor controls, and communication lines for new construction and renovation. 2. Corrects malfunctions in equipment and circuits using voltmeter, ammeter, ohmmeter, and circuit analyzers. 3. Assists in loading and unloading tools, materials, supplies, and equipment. 4. May involve analyzing, isolating and correcting malfunctions in equipment and circuits using voltmeters, ammeters, ohmmeters and circuit analyzers. 5. Operate, repair and install basic communications and specialty systems, such as vehicle parking control systems, emergency lighting, computer wire and fiber optics. 6. Cut, thread, bend, and install conduit; pull wire; and tie-in electrical panels. 7. Disassemble, clean, repair, and reassemble a variety of electrical equipment following established procedures. 8. Be knowledgeable and comply with all safety and electrical codes. Inspect assigned jobs for compliance to the National Electric Code and University standards. 9. Provide technical information, advice, operating instructions, and similar information to supporting skilled trade's employees. 10. Erect and work from ladders, scaffolding, boom trucks and similar devices. 11. Interpret blueprints, diagrams, sketches, circuit diagrams, and job specifications. 12. Recommend items needed for purchase. 13. Document job time and materials. 14. May assist other trades as necessary. 15. Perform related duties as assigned. Minimum Qualifications: Level I High school diploma or equivalent plus one to two years experience. Applies basic skills and learns advanced skills in procedures, techniques, tools, materials and/or equipment appropriate to area of specialization. Equivalent to an apprentice level in area of specialization. Level II High school diploma or equivalent plus three to five years of experience. Applies advanced skills in area of specialization. Adapts procedures, techniques, tools, materials and/or equipment to meet special needs. Equivalent to journeyman level in area of specialization. Valid Driver's License, CDL (Class A) may be required for some positions Journeyman Electrician Certification may be required for some positions. Any equivalent combination of related experience and/or education approved by the Department of Human Resources Management. Knowledge, Skills, and Abilities: Level I Duties and tasks are standardized. Performs some more advanced tasks as part of training and development. Resolves routine problems and refers more complex issues to higher levels. Works under direct supervision and selects from a variety of established procedures to accomplish assigned tasks. Level II Duties and tasks are varied and complex. Resolves most questions and problems and refers only the most complex issues to higher levels. Works under minimal supervision. May assist in training and checking the work of lower-level employees. Working Conditions and Physical Effort Regularly involves lifting, bending or other physical exertion. Often exposed to one or more elements such as heat, cold, noise, dust, dirt, chemicals, etc. Routine deadlines; usually sufficient lead time; variance in work volume seasonal and predictable; priorities can be anticipated; some interruptions are present; travel or other inconveniences have advance notice; involves occasional exposure to demands and pressures from persons other than immediate supervisor. Job frequently requires standing, walking, reaching, climbing or balancing, talking, hearing, handling objects with hands, and lifting up to 50 pounds. Job occasionally requires sitting, stooping/kneeling/crouching/crawling, and lifting more than 100 pounds. Vision requirements: Ability to see information in print and/or electronically, ability to distinguish colors. Instructions for Applying: Link to apply: *********************************** Apply online at msujobs.msstate.edu and complete a support staff application. Equal Employment Opportunity Statement: MSU is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, sex, religion, national origin, disability, age, sexual orientation, genetic information, pregnancy, gender identity, status as a U.S. veteran, and/or any other status protected by applicable law. We always welcome nominations and applications from women, members of any minority group, and others who share our passion for building a diverse community that reflects the diversity in our student population. What do I do if I need an accommodation? In compliance with the ADA Amendments Act (ADA), if you have a disability and would like to request an accommodation in order to apply for a position with Mississippi State University, please contact the Department of Human Resources Management at tel: ************** or *******************. If you have any questions regarding this policy, contact the Department of Human Resources Management at ************** or *******************. Upon request, sections of this job listing are available in large print, and readers are available to assist the visually impaired.

U. S. Steel is committed to fostering an inclusive workplace culture and celebrate the diversity of our employees. Objective of the Job: This position is an industrial electrician responsible for maintaining and troubleshooting a wide range of equipment in the Melt Shop area of Big River Steel facility. Duties and Responsibilities: 1) Ensure Safety, Environmental, Quality requirements and “where applicable” ResponsibleSteel requirements are followed. 2) Repair complex electrical equipment, including automated machines, controls, panels, relays, circuit breakers, communication systems, VFD drives 3) Install electrical equipment with minimal instruction after general assignment 4) Diagnose problems, replace, or repair defective equipment 5) Troubleshoot and repair complex hydraulic problems 6) Work with production to help develop and maintain a highly productive Melt-Shop Qualifications : 1) Demonstrated safety focus and willingness to proactively apply it in a team environment 2) Quality and detail oriented with strong technical and analytical problem-solving skills 3) Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge 4) Reliable team player with good communication skills 5) Highly motivated, self-directed, and willing to put in extra hours when needed 6) Minimum 5 years of work experience as an industrial electrician preferred 7) Previous experience with NFPA 70E practices 8) Familiar with common electrical tools and measuring instruments 9) Experience reading electrical, hydraulic, and pneumatic schematics 10) Strong working knowledge of 480-volt 3 phase electrical distribution systems and motor control 11) Basic PLC programing experience (Allen Bradley preferred) 12) HS diploma or equivalent is required; electrical degree or training is preferred Working Conditions and Physical Requirements: The environment is typical for a steel mill production areas, with extreme temperatures, high noise levels, and dusty/greasy areas. Physically demanding work will be required in the production environment. Typical work hours are four 12-hour shifts, which rotate days and nights. This results in working some weekends/holidays and overtime. Supervisory Responsibility: This position does not supervise others.

Apply Seasonal Electrical Worker Department of the Interior National Park Service Hot Springs National Park Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply The primary purpose of this position is to repair defective electrical wiring, controls, equipment, and fixtures in visitor centers, offices, ranger stations, museums, collection storage facilities, hotels, restaurants, maintenance facilities, public buildings, employee housing areas, residences, restrooms, campgrounds, ships, boats, trains, garages, and/or shops. The incumbent is required to adhere to all applicable electrical safety codes and standards. Summary The primary purpose of this position is to repair defective electrical wiring, controls, equipment, and fixtures in visitor centers, offices, ranger stations, museums, collection storage facilities, hotels, restaurants, maintenance facilities, public buildings, employee housing areas, residences, restrooms, campgrounds, ships, boats, trains, garages, and/or shops. The incumbent is required to adhere to all applicable electrical safety codes and standards. Overview Help Accepting applications Open & closing dates 12/22/2025 to 05/29/2026 Salary $25.42 to - $29.66 per hour Pay scale & grade WG 8 Location 1 vacancy in the following location: Hot Springs, AR Remote job No Telework eligible No Travel Required Not required Relocation expenses reimbursed No Appointment type Temporary - 1039 hours; The typical seasonal entry-on-duty period is April through October, but can be variable during these months due to weather conditions, project needs, or funding. Anticipated Entry on Duty: Mid April Work schedule Full-time - You may be required to work evenings, weekends, holidays, and/or overtime. Service Competitive Promotion potential None Job family (Series) * 2805 Electrician Supervisory status No Security clearance Not Required Drug test No Position sensitivity and risk Non-sensitive (NS)/Low Risk Trust determination process * Credentialing * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number MW-1543-HOSP-26-12854879-OC Control number 852970500 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Clarification from the agency U.S. Citizens, and those eligible for Interagency Career Transition Assistance Program (ICTAP) and/or the Career Transition Assistance Program (CTAP). Videos Duties Help The successful candidate for this position will perform the following duties: * Repairs defective electrical wiring, controls, equipment, and fixtures * Adheres to all applicable electrical safety codes and standards * Removes, replaces, tightens, splices, solders, and insulates defective wiring, controls, equipment, and fixtures. * Maintains electrical wiring and associated fixtures, controls, and equipment * Follows all standard safety procedures, wearing all applicable Personal Protective Equipment (PPE) associated with the job. Cut-off Dates: This is an open continuous announcement, in which applications are collected over several months, and have multiple cut-off dates. Applications will be considered throughout the open period of the announcement. INITIAL CUT OFF IS Monday, January 5, 2026. Additional referral certificates will be issued when a hiring official exhausts current certificate and/or additional vacancies need to be filled. Requirements Help Conditions of employment * U.S. Citizenship required. * Appointment subject to background investigation and favorable adjudication. * Meet Selective Service Registration Act requirement for males * Direct Deposit: Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program. * Incidental Driving: You may be required to operate a government (or private) motor vehicle as part of your official duties. Prior to your first official motor vehicle operation, and again every year thereafter (or more frequently if management determines such need exists), you will be required to sign an affidavit certifying to your possession of a valid State issued driver's license that is current and has not been revoked, suspended, canceled, or otherwise disqualified in any way to prohibit your operation of a motor vehicle. You will also submit a photocopy of your valid State issued driver's license prior to your first official motor vehicle operation, and again every year, or more frequently if management determines such need exists. Lastly, you may be required to submit (within a State sealed envelope or submitted directly by the State authorities), and at your own expense, all certified driving records from all States that discloses all valid driver's licenses, whether current or past, possessed by you. Please indicate in your application whether you possess a valid State driver's license. * Uniform: You will be required to wear a uniform and comply with the National Park Service uniform standards. A uniform allowance will be provided. * Government Housing: Housing is not available. * Minimum Age Requirement: Applicants must be at least (1)18 years old or (2) at least 16 years old and: (a) Have graduated from high school or been awarded a certificate equivalent to graduating from high school; or (b) Have completed a formal vocational training program; or (c) Have received a statement from school authorities agreeing with their preference for employment rather than continuing their education; or (d) Be currently enrolled in a secondary school and either work only during school vacation periods or work part-time during the school year under a formal student employment program. Qualifications To qualify for this position, you must have sufficient knowledge and ability in the following job-related factors: * Ability To Do The Work Of The Position Without More Than Normal Supervision (SCREEN OUT) * Ability To Use and Maintain Hand Tools (Electrical Work) * Ability To Use Electrical Drawings * Knowledge of Electrical Equipment * Technical Practices (theoretical precise, artistic) * Theory and Instruments (Electrical, Electronic) Used in Shop and Trade Practices * Trouble shooting (electrical) SCREENOUT: Have experience, with close supervision, performing the duties which includes performing journeyman level electrical work including a wide range of commercial, industrial, residential and new construction services and repair; repairing and replacing broken, worn, damaged or poorly operating wiring, fixtures, controls and equipment; using test instruments such as ammeters, meggers, and test lamps; trouble shooting and repairing difficult electrical problems such as intermittent, open or shorted circuits; applying a knowledge of electrical theory and a working knowledge of the National Electrical Code; reading, interpreting, and utilizing blueprints, wiring diagrams, sketches, and drawings used in the electrical trade; using a variety of electrical equipment, tools, and test equipment; using formulas basic to the electrical trade; and using a variety of electrical equipment, tools, and test equipment. If your knowledge and ability in the SCREEN OUT factor above is not sufficient, you will receive no further consideration. In preparing your application, describe in detail the experience and training which you have had that specifically prepared you for this job and to perform the duties described for this job. Experience should be clearly described and documented in your resume. The qualifications reviewer will not assume performance of such duties by Job Titles alone. Address your knowledge, skills and/or abilities in the areas shown in the job-related factors. Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education There is no substitution of education for experience for Wage Grade (WG) positions. Additional information This announcement may be used to fill additional positions if identical vacancies occur within 90 days of the issue date of the referral certificate. Non-Competitive Rehire Eligibility: Temporary seasonal employees can only maintain their non-competitive rehire eligibility if they work no more than a combined total of Temporary NTE less than 1040 hours anywhere in the National Park Service (NPS) within their established service year. Accordingly, non-competitive rehire eligibility allows for re-appointment to the same position or another position appropriate for temporary appointment with the same qualification requirements (5 CFR 316.402[b][7]), based on series and grade, anywhere in the major subdivision (NPS). If you have held a temporary seasonal appointment in the past 12 months and have already worked the maximum temporary appointment less than 1040 hours during that period, you are still welcome to apply. However, please be aware that exceeding the limit of 1040 hours in your established service year will result in the loss of your non-competitive rehire eligibility. The limit can be exceeded by working multiple temporary seasonal positions that result in a combined total greater than 1040 hours. The limit also can be exceeded by working a single temporary seasonal appointment that exceeds 1040 hours, unless granted an exception by OPM. Employment may be terminated at any time due to fluctuations in funding levels, project needs, employee performance, or other considerations. Physical Demands: This position is required to perform electrical work from ladders, scaffolds, platforms, and other cramped and hard-to-reach places. Duties require the incumbent to sit, stand, stoop, bend, kneel, climb, crawl, and work in uncomfortable positions. The incumbent may be exposed to electrical shock, spark and arc hazard, and other health hazards. If the incumbent is assigned to perform electrical work in remote locations, the incumbent may be required to walk, hike, or drive over rough and uneven terrain. The incumbent is expected to lift and/or carry items up to 50 pounds, and occasionally exceeding 50 pounds in weight. Working Conditions: Work is both indoors and outdoors. Work outside may be subject to extreme weather conditions, with wind, rain, snow, and ice, in temperatures ranging from below 0 to over 100 degrees. Depending on the geography of the park unit assigned, work may take place at elevations ranging from sea level up to 10,000 feet. The incumbent may be regularly exposed to dust, fogs, mists, gases, smokes, sprays, and vapors, as well as noise, vibration, cuts, and abrasions from the use of electrical tools and equipment and may occasionally be exposed to hazardous materials that can cause skin, eye, and respiratory irritation and burns, as well as microbiological organisms and potentially hazardous wildlife. The incumbent is expected to comply with all safety and occupational health requirements and wear protective clothing, gloves, face shields, and in some cases a respirator that may be uncomfortable. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. A review of your resume and supporting documentation will be made and compared against your responses to the Assessment Questionnaire to determine if you are qualified for this job. If your resume is incomplete or does not support the responses provided in the Assessment Questionnaire, or if you fail to submit all required documentation, you will be rated 'ineligible', 'not qualified', or your score will be adjusted accordingly. If a determination is made that you have inflated your qualifications or experience, you can lose consideration for this position. Please follow all instructions carefully; errors or omissions can affect your rating. Resumes must not exceed two single-sided pages and resumes longer than two pages will not be accepted. You may only submit one resume. Only the document submitted as the "Resume" under the Documents section will be used to determine your qualifications/eligibility and for rating purposes. In the event you submit more than one resume, only the latest submission will be reviewed. Candidates will be rated and ranked using Category Rating procedures. These procedures place candidates with veteran's preference above non-preference eligibles within each category. Veterans with a service connected disability of at least 10 percent are listed in the highest quality category, except when the position being filled is scientific or professional at the GS-09 grade level or higher. Under Category Rating, candidates will be rated and ranked into one of two categories: * Best Qualified - applicants possessing experience that substantially exceeds the minimum qualifications of the position including all selective factors and are highly proficient in all requirements of the job and can perform effectively in the position * Well Qualified - applicants possessing experience that exceeds the minimum qualifications of the position including all selective factors and are proficient in most of the requirements of the job Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help The following documents are required and must be submitted by 11:59 PM (EST) on 05/29/2026: * Resume which includes a list of all significant jobs held and duties performed. If military or civilian, please include your rank and/or grade. Resumes must not exceed two single-sided pages and resumes longer than two pages will not be accepted. The minimum font size is 10-point for all body text. Headers may be slightly larger but must remain legible. All resumes must maintain a minimum 0.5-inch margins on all sides to ensure readability and prevent excessive content compression. Including supplemental pages or attachments disguised as resume extensions are prohibited and will not be reviewed to determine your eligibility/qualifications. * A complete Occupational Questionnaire * Other Supporting Documents, if applicable, such as: * Veterans Preference Documentation: * If you are a Discharged, Non-Disabled Veteran, you must submit a copy of your DD-214 showing character of discharge (Member 4 copy), or other Documentation of Service and Separation under Honorable Conditions, as listed on the SF15. If you don't have your DD-214, you may request it after discharge from the National Archives. * If you are a veteran within 120 days of discharge, you must submit signed documentation from the Armed Forces certifying: 1) your expected release/retirement from active duty, 2) under honorable conditions, 3) your pay grade/rank/rate at time of discharge, 4) dates of active duty service, 5) any campaign or expeditionary medals received, & 6) dated within 120 days of your separation. * If you are a Disabled Veteran, Purple Heart Recipient, or Mother or Spouse of a Disabled or Deceased Veteran, you must submit all additional proof required by the SF15, and if applicable, a completed SF15. You may request a copy of your Department of Veterans Affairs letter from ******************** or call ************** to establish proof of disability. * Documentation for Interagency/Career Transition Assistance Plan consideration if you are a displaced Federal employee within the local commuting area. You must include: 1) Proof you are a displaced Federal employee, e.g., RIF Separation Notice, Notice of Proposed Removal, etc; 2) SF-50s (Notifications of Personnel Action) showing career/conditional tenure competitive status, promotion potential and duty location; and 3) your most recent performance appraisal. To exercise selection priority, displaced or surplus Federal employees must be rated well-qualified or above 70 on the rating criteria for this position. Do not submit photographs with your application package. Documents with photographs may not be seen by hiring officials - you must remove your image from any badges, licenses, etc. Do not upload Adobe portfolio documents. Adobe portfolio documents are not viewable by our agency's staffing offices. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply Help To apply for this position: You must complete the occupational questionnaire and submit the documentation specified in the Required Documents section below. To receive consideration, the complete application package must be submitted by 11:59 PM (EST) on 05/29/2026.You must provide documentation to support your claim for each eligibility selected. Please review the required documentation listed in the eligibilities language to ensure you submit the appropriate information. Note: You will only be marked eligible for those eligibilities that you selected and provided the appropriate supporting documentation. WE DO NOT ACCEPT HARD-COPY OR E-MAIL APPLICATION PACKAGES. * Select Apply. If you are not logged in, you will be prompted to login or create an account. * Prompted to Start the Application Process by selecting "Start Application." * Click here for USAJobs Help with "How to create an application" * To PREVIEW the application questionnaire, select the following link: ******************************************************** * Select or add the resume you want to use for this application. Click here on how to build a resume in USAJOBS. * Select documents you want included in this application. * Review package to acknowledge your documents were reviewed. * Select if you want to include your demographic information. * After reading and certifying the application is true and submitted in good faith, select "Continue to Agency Site." * Follow onscreen prompts and instructions to complete your application. * Add the supporting documents by indexing your documents with the dropdown. * Upload any missing required documents or optional documents. * Review and Submit Application. * While logged in, you can check the status of your application by selecting "+" next to the job title for this position. * You can review or revise your application at any point during the open period of the announcement. * To update an application, you should log into your USAJOBS account and select "+" next to the job title for this position. Select "Update Application" for this job. * Note: When you click Update Application, you will be prompted to re-select your documents from USAJOBS. Documents submitted with the first application will no longer be associated with the applicant record. So it is important that you select all documents you want to use in the re-application. Agency contact information MWR HR Staffing Team Email mwr_hr_staffing_************ Address Hot Springs National Park 101 Reserve Street Hot Springs, AR 71901 US Next steps Once the Occupational Questionnaire is received you will receive acknowledgement that your submission was successful. If you are among the most qualified candidates and your name is referred to the hiring official, you may be contacted directly for a possible interview. You will be notified of the status of your Application Package at the time candidates are referred for consideration, and when the selection process is complete. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help The following documents are required and must be submitted by 11:59 PM (EST) on 05/29/2026: * Resume which includes a list of all significant jobs held and duties performed. If military or civilian, please include your rank and/or grade. Resumes must not exceed two single-sided pages and resumes longer than two pages will not be accepted. The minimum font size is 10-point for all body text. Headers may be slightly larger but must remain legible. All resumes must maintain a minimum 0.5-inch margins on all sides to ensure readability and prevent excessive content compression. Including supplemental pages or attachments disguised as resume extensions are prohibited and will not be reviewed to determine your eligibility/qualifications. * A complete Occupational Questionnaire * Other Supporting Documents, if applicable, such as: * Veterans Preference Documentation: * If you are a Discharged, Non-Disabled Veteran, you must submit a copy of your DD-214 showing character of discharge (Member 4 copy), or other Documentation of Service and Separation under Honorable Conditions, as listed on the SF15. If you don't have your DD-214, you may request it after discharge from the National Archives. * If you are a veteran within 120 days of discharge, you must submit signed documentation from the Armed Forces certifying: 1) your expected release/retirement from active duty, 2) under honorable conditions, 3) your pay grade/rank/rate at time of discharge, 4) dates of active duty service, 5) any campaign or expeditionary medals received, & 6) dated within 120 days of your separation. * If you are a Disabled Veteran, Purple Heart Recipient, or Mother or Spouse of a Disabled or Deceased Veteran, you must submit all additional proof required by the SF15, and if applicable, a completed SF15. You may request a copy of your Department of Veterans Affairs letter from ******************** or call ************** to establish proof of disability. * Documentation for Interagency/Career Transition Assistance Plan consideration if you are a displaced Federal employee within the local commuting area. You must include: 1) Proof you are a displaced Federal employee, e.g., RIF Separation Notice, Notice of Proposed Removal, etc; 2) SF-50s (Notifications of Personnel Action) showing career/conditional tenure competitive status, promotion potential and duty location; and 3) your most recent performance appraisal. To exercise selection priority, displaced or surplus Federal employees must be rated well-qualified or above 70 on the rating criteria for this position. Do not submit photographs with your application package. Documents with photographs may not be seen by hiring officials - you must remove your image from any badges, licenses, etc. Do not upload Adobe portfolio documents. Adobe portfolio documents are not viewable by our agency's staffing offices. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

This position is an industrial electrician responsible for maintaining and troubleshooting a wide range of equipment in the Coated Products area of Big River Steel facility. Duties and Responsibilities: Troubleshoot, repair, and perform preventative maintenance on complex electrical equipment, including PLCs, control circuits, communication systems, I/O field devices, and VFD drives/motors Install or modify electrical equipment following electrical code, manuals, schematic diagrams, and other specifications with minimal instruction after general assignment Use Electrical Ingenuity and Work directly with all mechanics and operations personnel in a fast-paced environment to help develop a safety focused and productive Coated Products Team. Support maintenance teammates to help maintain a positive and efficient work environment focused on safety and reliability. Qualifications: Demonstrated safety focus and willingness to proactively apply it in a team environment Quality and detail oriented with strong technical and analytical problem solving skills Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge Reliable team player with good communication skills Highly motivated, self-directed, and willing to put in extra hours when needed Demonstrated proficiency using precision measuring instruments Experienced with mobile equipment. ( Rough Terrain, Man Lift, Fork Lift Carry Deck or Broaderson) Efficient in the Metric Measuring System a plus Basic computer skills; MS Excel, Word, and Outlook is a plus Read Electrical drawings, blueprints, diagrams and schematic drawings to determine work procedures Knowledgeable of programming and troubleshooting logic to include ladder logic, function block programming Knowledgeable of VFDs, principle design, programming, and trouble shooting skills; I.O. systems and design layout; three-phase motors and ability to troubleshoot; network infrastructure; basic mechanical components in a mill; basic Hydraulic systems, how they operate and design layout Willing to learn and take on multiple roles, such as mechanical and production positions as well as continually improve on primary skill set HS diploma or equivalent is required; electrical degree or training is preferred Working Conditions and Physical Requirements: Environment is typical for a steel mill production areas, with extreme temperatures, high noise levels, and dusty/ greasy areas. Physically demanding work will be required in the production environment. Typical work hours are four 12 hour shifts, which rotate days and nights. This results in working some weekends/holidays and overtime.

Purpose and Scope SUMMARY DESCRIPTION Works under general supervision to perform journeyman-level work, such as repairing and maintaining electrical wiring; evaluating layout plans and cost estimates; installing new systems; repairing existing electrical high and low voltage electrical systems; performing minor rebuilding tasks; and repairing or replacing miscellaneous equipment. Essential Job Functions This position description is not intended to be an exhaustive list of all duties, knowledge or abilities associated with this classification, but is intended to accurately reflect the primary job elements. Ensures the safe, efficient, and cost-effective repair and maintenance of all electrical equipment in the District. Inspects electrical installations of contractors to ensure compliance with specifications and electrical codes. Evaluates and estimates the cost of electrical repair and minor installations for new and/or remodeled projects. Plans layout and installs and repairs wiring, electrical fixtures, apparatus, and control equipment. Responds to electrical emergency situations, when requested. Performs other related duties as assigned or directed. Minimum Qualifications Graduation from an accredited high school with a high school diploma or possess a GED; Plus , four (4) years' experience in commercial electrical installation and /or maintenance. Memphis and Shelby County Journeyman Electrical License required. (PROOF OF EDUCATION, TRAINING, AND/OR EXPERIENCE IS REQUIRED). Degree Equivalency Formula: Bachelor's Degree= 4 years plus required years of experience. Master's Degree= 2 years plus required years of experience. Where Master's degrees are required, years for Bachelor's Degrees must be included. SPECIAL REQUIREMENT(S): Memphis and Shelby County Journeyman Electrical License required. Additional Job Details This position will work in MSCS Zone 1 and Zone 3.

About Us Southern Electric Corporation a Quanta Services, Inc. (NYSE:PWR) company, is an electrical utility contractor specializing in the construction of high-voltage transmission lines, underground, and distribution lines as well as providing emergency restoration services. A proven leader in the industry since 1985, SEC has earned a reputation of providing superior work with a strong focus on customer satisfaction and safety. We currently manage over 100 crews and nearly 2,000 pieces of late model equipment. Customers include investor-owned utilities, electric cooperatives, and municipalities throughout our work footprint. Our team is our family. We are 100% committed to the safety of our team members and providing industry leading training. We believe we can be the last job you ever want to apply for. Call us family! About this Role A Journeyman Lineman at Southern Electric Corporation classification will have received their training in an approved forty-two (42) month apprenticeship program or a certified testing program or must have five (5) years of continuous substation/line construction/maintenance experience. Journeyman Linemen shall have a working knowledge of all aspects of substation/line work and have the capability and expertise to work independently if required. What You'll Do * Installs and repairs structures, conductors or equipment used in electrical power or distribution systems. * Installs and maintains line hardware and erect wooden and/or steel poles and light or heavy-duty transmission towers. * Splices cables together for overhead transmission lines, customer service lines, or street light lines. * String wire conductors and cable between erected poles and adjust slack, using winch, hoist, or other means. * Utilize aerial lift equipment and/or climb poles and removes and installs hardware, wires, and other equipment. * Opens/closes switches to isolate or energize line sections. * Test lines and equipment for potential and, installs grounding devices to de-energize circuits and equipment to perform repairs, adjustments or to remove electrical hazards. * Capable of calculating set up locations for stringing operations. * Secure one shots, hold tags, R-switches, hot line holds etc. on lines working near or over. * Required to hang travelers from poles or towers. * Ensure that guards and covers are in place for lines, highway, and other obstructions on ROW. * Ensure that all grounds are in place on stringing equip. grounding blocks etc. * Supervise conductor stringing operation. * Capable of operating all const. equipment if needed. * Capable of using plumb bob, pulling guy wires, and ensuring that poles are plumb before dead ending cond. * Interpret charts and calculate sag for conductors, using owners required method. * Capable of working from hanging ladders, walk boards, or baskets on booms for clipping, dead ending cond., etc. * Capable of hanging and operating carts for spacing bundle conductors. * Required to set guard poles, string lead line, string cond., sag, clip, and dead-end cond. * Watch over, direct, and train Apprentice linemen working under or with them. * Direct and ensure that Underground utilities are located. * Replaces and straightens poles and attaches cross-arms, insulators, and auxiliary equipment to wood poles preparatory to erection. * Cleans, trims, and splices corresponding conductors by splicing together or by joining ends with compression connections. * Tests conductors to identify corresponding conductors and to prevent incorrect connections, according to electrical diagrams and specifications. * Install watt-hour meters and connects service drops between power line and consumer. * Covers conductors with insulating material. * Uses rubber gloves, hot sticks, or the live line "bare hand" method to work on and/or repair energized lines to avoid interruption of service. What You'll Bring * May be required to relocate as work requirements demand. * May be required to hold a valid class "B" commercial driver's license. * Need to have certification for light cranes, boom trucks, etc. * May be required to read and interpret blueprints. * Drives and operates conveyance machinery equipped with tools and materials to and from job site. * Adheres to all Company Safety and Health Policies * May work in storm restoration operations to rebuild and/or repair damaged power systems. * May attend training classes or seminars to gather knowledge of new processes, safety regulations and/or refresher training. * Works with limited supervision. What You'll Get * Medical * Dental * Vision * 401K Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Job Description We have openings for electricians in the Jonesboro area. Some of these jobs are high profile projects. We are especially in need of journey level and supervisory level workers. All of our positions include: Great Pay Guaranteed raises Family Healthcare Retirement All Benefits are 100% employer paid Opportunity for every skill level Free upgrade and leadership training Contractor provided power tools Overtime opportunities Job Responsibilities for Commercial and Industrial Electrician: Installation and Maintenance: Install, maintain, and repair electrical systems in commercial and industrial settings, including wiring, panels, circuits, motors, and equipment. Troubleshooting and Repairs: Diagnose and troubleshoot electrical issues, using a variety of tools and techniques to identify and resolve problems efficiently. Compliance with Codes and Standards: Ensure all electrical work adheres to local, state, and federal electrical codes, safety standards, and building regulations. Blueprint Interpretation: Read and interpret blueprints, schematics, and technical drawings to plan and execute electrical installations and upgrades. System Upgrades and Modifications: Upgrade and modify existing electrical systems to improve performance or meet new requirements, such as adding outlets or equipment. Safety Protocols: Adhere to strict safety protocols, including lockout/tagout procedures, to ensure the safety of the work environment. Collaboration: Work closely with other contractors, engineers, and team members to complete projects on time and within budget. Preventive Maintenance: Conduct regular inspections and preventive maintenance on electrical systems and equipment to reduce downtime and increase operational efficiency. Emergency Response: Provide on-call support for emergency electrical repairs, ensuring quick response and resolution of critical issues. Job Posted by ApplicantPro