Electrician jobs in Laredo, TX

Journeyman Electrician - Houston Metro TVM Replacement Project We are seeking a licensed Journeyman Electrician for a specialized project involving the replacement of Ticket Vending Machines (TVMs) for Houston Metro's INIT system. This position will work directly with Houston Metro personnel to safely disconnect, replace, and reconnect power systems for TVM units throughout the Metro system. Project Details Client: Houston Metro (INIT Project) Start Date: November 2025 (anticipated) Schedule: Monday - Friday, 7:00 AM - 4:30 PM Pay Rate: $32-$35 per hour (based on experience) Note: Selected candidate will be required to complete Metro training through Jimmy prior to project start Essential Duties and Responsibilities Safety & Coordination Coordinate with Houston Metro employees to safely shut off power to TVM units Perform proper lockout/tagout (LOTO) procedures during all work activities Adhere to all Metro safety protocols and requirements Electrical Work Disconnect and reconnect TVM power systems Test and verify power connections after completing TVM changeouts Make power connections in confined spaces within TVM units Extend existing wiring at base of TVMs using bell boxes and blank covers Perform low voltage connections on payment validators (PV) as needed Conduit & Fitting Installation Work with ½" through 1" seal tight conduit and fittings Perform changeovers from rigid conduit to seal tight Downsize seal tight connections using reducing bushings as required Install ¾" through 1" rigid conduit as needed Drill through thick metal using ½" through 1" hole saws Equipment Operation & Documentation Operate pallet jack for material handling Use bandsaw and grinder with proper PPE Document daily material usage and submit reports to Project Manager Required Qualifications Active Texas Journeyman Electrician License (required) Demonstrated experience with conduit installation and electrical connections Ability to work in tight spaces and confined areas Physical ability to lift 50 lbs regularly Strong attention to detail and commitment to safety protocols Equipment & Materials All tools and materials will be provided on ESP box truck Proper PPE required for all tasks To Apply Please submit your resume and current license information. Qualified candidates will be contacted for interviews and Metro training coordination. This position requires successful completion of Houston Metro training prior to project commencement

We put the unity in "opportunity." Opportunity Snapshot: Compensation: $35-45/hour, depending on experience Work Schedule: M-F (10+ hours) Assignment Duration: 6 months+ Benefits: Comprehensive insurance, 401(k), PTO and holidays Responsibilities: Knowledge of and experience working with motor control centers safely and effectively Knowledge of and experience working medium voltage equipment and motors safely and effectively Knowledge of or experience working at compressor stations in electrical construction, maintenance, and repair Process controls and tubing experience is preferred Heat trace installation, repair, and maintenance experience required Knowledge of A/C and D/C circuits, as well as electrical theory, ladder logic, read electrical schematics, electrical devices and apparatuses Knowledge of proper power and control troubleshooting (pump panels, instrument devices, relays, breakers, transformers single and three phase, motors etc.) Knowledge of overhead power line and troubleshooting transformer sizing and wiring, fuse coordination is a plus Knowledge of VFD and Soft start devices, operation, and components is a plus but not a requirement Will have to be available for call out rotations Must has knowledge of meters and how to take measurements safely and correctly Qualifications: Licensed Journeyman Texas and/or New Mexico preferred Candidate needs to have good communication skills verbal and written Must have clean driving record for at least 3 years Must work well with others within his/her department and other departments Must have good work ethics honesty, trustworthy, punctual, integrity etc. Must be self-motivated individual and able to coordinate workflow Individual has to be available for on call rotation once put into rotation and be able to manage tasks and workflow accordingly Individual will need to have a good safety culture and will need to conform to ours and be a safety leader in all aspects of day-to-day work and tasks The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Driven from the bottom up by their innovative and highly engaged employees, our Client takes pride in their collaborative organization where employees continuously learn from one another and are provided with a quality environment in which to work, with a company culture committed to sustainability and corporate responsibility. Based in Houston, Texas, our Client is one of the largest independent (non-integrated) crude oil and natural gas companies in the US.

***This position will be required to work a Rotational schedule which includes days and nights with occasional overtime*** will work in an industrial, non-climate controlled setting. Opportunities: Electrical/Electronic - Performs electric and electronic advanced maintenance inspections, diagnosis and corrective actions, performing systematic analysis of problems and improvement opportunities, in a safe and efficient manner according to applicable procedures and best practices, complying with defined quality standards. Inspects, diagnoses and performs advanced electric and electronic repairs, replacements and upgrades. Follows up repairs ensuring the performed work effectiveness. Inspects electric and electronic equipment according to maintenance plans. Makes complex failure analysis, establishing the problems' root causes and taking actions to avoid repetitions. Performs reviews of emergency groups' repairs and failure analysis. Carries out analysis and proposal of machine and equipment upgrades or replacements. Develops basic PLC programs and software. Interprets electrical drawings. Verifies the correct functioning of tools, instruments and accessories checking they fulfill with specifications. Develops and tests preventive maintenance plans. Plans corrective actions for scheduled or unscheduled shutdowns, based on the inspections performed or the problems diagnosed. Guarantees the availability of resources, ensuring a suitable minimum stock and the definition of the required information on the maintenance systems. Updates information in the maintenance systems and performs maintenance reports. Other duties as required or assigned Strongly Preferred: Experience working in an industrial environment Experience with working on industrial equipment handling voltage up to 480 Experience with PLCs logic (reading & interpreting) LOTO Understands electrical schematics Safety mindset Experience: Manufacturing: 3 years (Preferred) If you are interested in this position and your experience and knowledge match our requirements, please apply, or contact your local HR representative for more information. Thank you for your interest. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Paid time off Parental leave Vision insurance Work Location: In person

Barnard Construction Company, Inc., based in Bozeman, Montana, is a heavy-civil construction company with projects underway across North America. Barnard is ranked by Engineering News-Record , a leading construction industry periodical, as one of the nation's Top 400 civil contractors. We specialize in dam construction and rehabilitation, power transmission and distribution, tunneling, inland marine, oil, gas, utility, and sewer and water pipeline projects. We offer competitive wages, 401(k)s, a generous health plan, and challenging career opportunities with a financially solid company. Barnard's people are the reason for the success of the company. Our reputation attracts the highest quality personnel, people who are committed to producing projects that set a standard for excellence. At Barnard, we build the riskiest, most difficult, complex jobs we can find and we hire people who thrive on tough work and demanding opportunities. Qualifications Must possess competence in the following areas in order to perform this role in a safe, productive and effective manner: Interprets drawings, sketches, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations Installs control and distribution apparatus' and fastens in place Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement May be required to pull wire through conduit; connect wiring to fixtures and power equipment Work with medium and low voltage systems Disassembles and repairs defective electrical equipment or systems Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools Responsibilities Must be able to pass a pre-employment drug screen Must be able to pass pre-employment criminal background screen Must possess current State of Texas Journeyman or Master Electrician License Ability to exert heavy physical effort, handling average weight objects up to 25 pounds Ability to kneel, stoop, crouch, balance, climb or crawl Ability to correctly rig and hoist material Ability to tolerate heights without fear Ability to maintain balance Ability to stand or walk for long periods of time, reach for, handle, and manipulate items and to work in extreme weather conditions (cold and wet) Able to work long, irregular and varied hours, 50 to 70 hours per week Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. Ability to safely and effectively perform the essential job functions consistent with the ADA, FMLA and other federal , state and local standards, including meeting qualitative and/or quantitative productivity standards. Equal Opportunity Employer Veterans/Disabled, E-Verify Employer

We are seeking a skilled and experienced Journeyperson Electrician to join our team. The ideal candidate will have a strong background in electrical systems, with the ability to work independently and as part of a team. This role involves installing, maintaining, and repairing electrical systems in various settings, ensuring compliance with safety standards and regulations. Responsibilities Install, maintain, and repair electrical systems and equipment in residential, commercial, or industrial settings. Read and interpret blueprints, schematics, and technical drawings to determine the layout of electrical systems. Utilize voltmeters, ohmmeters, and other testing devices to troubleshoot electrical issues. Work with power tools and hand tools to complete tasks efficiently and safely. Ensure all work complies with the National Electrical Code (NEC) and other relevant regulations. Collaborate with other tradespeople and contractors to complete projects on time. Perform preventive maintenance on electrical systems to minimize downtime. Document all work performed and maintain accurate records of repairs and installations. Qualifications Completion of an apprenticeship program or equivalent experience as an electrician. Proficiency in blueprint reading and understanding of schematics. Experience working with logic controllers and industrial electrical systems is preferred. Strong problem-solving skills with the ability to troubleshoot complex electrical issues. Familiarity with NEC standards and safety regulations related to electrical work. Ability to work effectively both independently and as part of a team. Excellent communication skills to interact with clients, contractors, and team members. A valid electrician's license is required. Must have journeyman or NCCER licence TWIC card a PLUS Working 4 -10's Join our dedicated team where your expertise will contribute to our commitment to quality service and safety in every project we undertake.

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. This is considered to be a safety sensitive position. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

Department: GMR EC Salary: TB Reporting Manager: Journeyman Electrician or FLSA: NON-EXEMPT Foreman General Description: This is a full-time, non-exempt position at GMR headquarters in Heath, TX. The position falls under the GMR EC to the Foreman or Journeyman electrician on site. This is a position with opportunities to advance as the company grows. This position is primarily responsible for safety and efficiency performing electrical installation and repair work in a supporting apprenticeship role. Specific Duties: Supporting and learning from journeyman and master electricians. The installation, maintenance, and repair of electrical systems in the commercial construction markets at job sites of various sizes and in various locations. This includes assisting in the diagnoses or trouble shooting of existing electrical systems. Assisting with onsite estimates and proposals for service work and small installations. Cooperating with sub-contractors on job sites to ensure the efficient completion of work. Assisting in the permitting process as needed. Safety: Understanding all applicable safety rules and regulations prior to beginning each work day. Responsible for reading, understanding, following, communicating, and complying with safety rules, processes, and procedures at all stages of work and for all job site employees. Understanding the rules/protocols for the safe operation of all tools and equipment that you may be asked to use. Reporting or communicating the need to stop when unsafe work practices are observed. Regular safety inspections of tools before use. With assistance, reading construction plans and/or scope of work documents to determine the correct orderly approach for completing your work as specified in a safe and efficient manner. The inspection of your work at each stage of execution to ensure the work is completed in a safe and proper manner. The promotion of excellent customer relations through professional interactions and communication with the customer and all other entities working on the job site. Assisting in the acquiring, organizing, inventorying, staging and distribution of equipment and materials as needed and/or upon request. Performs other job-related duties as assigned. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. General Requirements: Personal integrity and the ability to maintain strict confidentiality. High School Graduate, GED, or equivalent. Enrolled in and passing IEC Apprenticeship program or approved equivalent. Must possess a strong work ethic and a belief that safety practices are a primary responsibility of all employees. Good communication skills. Sound and organizational and time management skills. Careful attention to detail. Knowledgeable concerning the use and care of the tools, equipment and materials required for most commercial electrical projects. The ability to communicate and interact in a professional manner coworkers. The ability to maintain positive and professional relationships with customers during job site and interactions. Willing to travel out of town and/or out of state as required by project. Requirements: State of Texas Apprentice Electrician License issued by the Texas Department of Licensing and Regulation (TDLR). CPR and First Aid certification (must be obtained within 3 months of date of hire). Proficient with Microsoft Office and Internet Explored/Chrome. Must provide your own hand tools. Benefits: GMR offers a solid benefits package for full-time employees, including medical insurance, partially contributes to dependent premiums, if elected, 401K with matching contributions by GMR, paid vacation and sick time, life insurance, disability insurance, etc.

This position is responsible for the electrical maintenance and service work in the Utilities Department. * Installs conduits, wires, pull boxes, switchboards, controllers, and switches required in making additions, extensions, or alterations in electrical systems. * Tests, locates, and repairs trouble in electrical circuits and equipment; repairs and replaces defective parts in motors, generators, storage batteries, switchboards, controllers, contactors, switches, and other fixtures and appliances. * Maintain a stock of selected electrical supplies; prepare reports and maintain records. * Services, repairs, and maintains lighting, power, and heating, as assigned. * Performs electrical maintenance and service work. * Installs or repairs SCADA fixtures, power outlets, and switches. * Maintains and repairs the air conditioning unit. * Performs any other duties as assigned. Knowledge, Skills, and Abilities * Knowledge of modern SCADA procedures and methods, including computers and applicable software. * Knowledge of national electrical codes. * Knowledge of the installation of emergency backup generators. * Knowledge of the standard practices, methods, tools, and materials of the electrical trade. * Ability to meet the schedules and deadlines of the work. * Ability to maintain the confidentiality of information and professional boundaries. * Ability to work from drawings and specifications. * Ability to perform strenuous and routine work. Minimum Qualifications * Must have a high school diploma or GED certificate from an accredited institution. * At least five (5) years of electrical work experience. * Valid Texas Journeyman Electrician License. * Valid Texas Driver's License. Supplemental Information Complexity/Scope of Work * The work consists of related electrical maintenance and repair duties. Electrical hazards contribute to the complexity of the position. * The purpose of this position is to install, repair, and maintain electrical systems in county facilities. Success in this position ensures safe and well-maintained electrical systems. Physical Demands/Work Environment Occasionally * Ascending or descending ladders, stairs, scaffolding, ramps, or poles. * Moving oneself in different positions to accomplish tasks in various environments, including tight and confined spaces. * Remaining in a stationary position, often standing or sitting for prolonged periods. * Moving about to accomplish tasks or moving from one worksite to another. * Adjusting or moving objects up to 50 pounds in all directions. * Operating machinery and/or power tools. * Working in low temperatures * Working in high temperatures * Outdoor elements such as precipitation and wind. * Working in noisy environments. * Working in hazardous conditions. * Working in small and/or enclosed spaces. * Working in adverse environmental conditions is expected. * Sedentary work that primarily involves sitting/standing. * Light work that includes carrying objects up to 20 pounds. * Medium work that includes carrying objects up to 50 pounds. * Heavy work that includes carrying objects up to 100 pounds or more. * Driving a County vehicle or a personal vehicle. Constantly * Communicating with others to exchange information. * Repeating motions that may include the wrists, hands, and/or fingers. * Operating motor vehicles or heavy equipment. * Assessing the accuracy, neatness, and thoroughness of the work assigned. Other Requirements/Information * Drug and Alcohol Policy applies to this job. Pre-employment drug/alcohol testing, Motor Vehicle Record (MVR), and criminal background checks are required. * This position is covered under Civil Service; therefore, is subject to the Civil Service Rules and Regulations in addition to all other Webb County policies. Webb County provides a variety of benefits available to employees. Please visit the Risk Management website for more details. ************************************************************* The following list of benefits is offered only to benefits-eligible employees in Full-Time positions: * Medical Insurance * Dental Insurance * Vision Insurance * Wellness Program * Life Insurance * Ancillary products * Employee Assistance Program* * Employee Clinic* * Vacation and sick leave * Accrual rates increase based on years of service * Sixteen (16) County-observed holidays and four (4) personal holidays * Retirement benefits (TCDRS) * Available to ALL employees Available to Permanent Part-Time employees 01 What is your highest level of education? * Less than High School * High School Diploma or G.E.D. equivalent * Some College Hours * Vocational Certificate * Associates Degree * Bachelor's Degree * Master's Degree * Doctoral Degree or higher 02 Do you have at least five (5) years of electrical work experience? * Yes * No 03 Do you have a current and valid Texas Journeyman Electrician License? * Yes, I have a current and valid Texas Journeyman Electrician License. * Yes, I have a current and valid out-of-state Journeyman Electrician License. * No, I do not have a current or valid Texas Journeyman Electrician License. 04 Do you possess a valid and current Texas driver's license? * Yes, I have a valid and current Texas driver's license. * Yes, I have a valid and current out-of-state driver's license. * No, I do not have a valid or current Texas driver's license. 05 Please confirm your understanding that if selected as a final candidate for this position, you will be required to provide a high school diploma, a GED certificate, college transcript from an accredited institution, and/or other documentation of achievement (whichever is applicable) prior to being hired. (We highly recommend you begin obtaining documentation to avoid delays in the hiring process if applicable) * Yes, I understand this requirement and would be able to provide required documentation prior to hire. * No, I would not be able to provide required documentation. Required Question Employer Webb County (TX) Address 1110 Washington Street Suite 204 Laredo, Texas, 78040

Barnard Construction Company, Inc., based in Bozeman, Montana, is a heavy-civil construction company with projects underway across North America. Barnard is ranked by Engineering News-Record , a leading construction industry periodical, as one of the nation's Top 400 civil contractors. We specialize in dam construction and rehabilitation, power transmission and distribution, tunneling, inland marine, oil, gas, utility, and sewer and water pipeline projects. We offer competitive wages, 401(k)s, a generous health plan, and challenging career opportunities with a financially solid company. Barnard's people are the reason for the success of the company. Our reputation attracts the highest quality personnel, people who are committed to producing projects that set a standard for excellence. At Barnard, we build the riskiest, most difficult, complex jobs we can find and we hire people who thrive on tough work and demanding opportunities. Qualifications Must possess competence in the following areas in order to perform this role in a safe, productive and effective manner: Interprets drawings, sketches, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations Installs control and distribution apparatus' and fastens in place Test and start up systems and continuity of circuit to insure electrical compatibility and safety of components Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement May be required to pull wire through conduit; connect wiring to fixtures and power equipment Work with medium and low voltage systems Disassembles and repairs defective electrical equipment or systems Operate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical tools Responsibilities Must be able to pass a pre-employment drug screen Must be able to pass pre-employment criminal background screen Must possess current State of Texas Journeyman or Master Electrician License Ability to exert heavy physical effort, handling average weight objects up to 25 pounds Ability to kneel, stoop, crouch, balance, climb or crawl Ability to correctly rig and hoist material Ability to tolerate heights without fear Ability to maintain balance Ability to stand or walk for long periods of time, reach for, handle, and manipulate items and to work in extreme weather conditions (cold and wet) Able to work long, irregular and varied hours, 50 to 70 hours per week Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. Ability to safely and effectively perform the essential job functions consistent with the ADA, FMLA and other federal , state and local standards, including meeting qualitative and/or quantitative productivity standards. Equal Opportunity Employer Veterans/Disabled, E-Verify Employer

Diamondback Mechanical Group in San Antonio, TX is hiring a full-time Apprentice Electrician to repair and install electrical systems under the direction of our experienced electricians. The schedule for this position is 7:00am-3:30pm, Monday-Friday with optional Saturday overtime when available. Are you a quick learner who loves fixing things? Would you like to learn from the best? If so, read on about this exciting apprenticeship! WE OFFER $16 - $25/hr 50% paid medical insurance. 40 hrs. of paid vacation after a year of employment. Paid Holidays Employee Tool Purchase Program Supplemental dental, vision, life, and accident insurance. Access to the IEC apprenticeship program. ABOUT DIAMONDBACK MECHANICAL GROUP Diamondback Mechanical Group: AC, Heating, Refrigeration & Electrical Service is a locally-owned company that has been providing quality services to our community and the surrounding areas for years. We take pride in providing the best for our customers by offering the highest quality workmanship in the installation, repair, or replacement. The technicians and staff at Diamondback Mechanical are a dedicated group of individuals, working together as a team to ensure quality work and customer satisfaction. We are a company that values our team and what they bring to the table. We strive to hire qualified employees that will grow and excel with us. We are a young company and offer our excellent staff advancement opportunities as the business grows. JOB DESCRIPTION As an Apprentice Electrician you will work under the guidance of a Journeyman level electrician assisting in the installation, alteration, addition, and/or repair of electrical systems on commercial work sites. The ideal candidate will be working towards a career in the trade with Diamondback Mechanical Group. An Apprentice Electrician will: Gather tools and supplies to be used at work site. Measure, cut, and bend wire and conduit. Trace out short circuits in wiring. Assist in lifting, positioning, and fastening objects such as wiring, conduit, and motors. Maintain tools and equipment and keeps supplies and parts in order. Clean work area, machines, tools, and equipment. Help in securing, relocating and organizing materials, small tools, and equipment from and back to appropriate storage areas. Keep work area clean by collecting and disposing of scrap, excess materials, and refuse. Assists in pulling wire, lifting, hoisting and positioning materials. May operate hand tools and equipment under direct supervision of a Foreman or more senior electrician. Assists in mounting and strapping conduit. Assists more senior personnel in electrical installations, connections, and terminations under close supervision. Performs other project related duties and assignments as instructed by supervisor. An apprentice electrician will not work on energized circuits or equipment. JOB REQUIREMENTS The ideal candidate will satisfy the following requirements and qualifications: High School Diploma or General Education Degree MUST have Current State Apprentice Electrician's License MUST be able to pass a background screen Valid driver's license Ability to multitask while staying organized Strong verbal and written communications skills Positive customer service skills Experience in lighting a plus! Electrical experience is preferred, but not required. Do you have a positive, can-do attitude? Are you eager to learn? Do you have good communication skills? Are you friendly and service-oriented? Do you present yourself professionally? Are you detail-oriented? Are you honest and respectful of others and their property? If so, you may be perfect for this apprenticeship! Fill out our initial 3-minute, mobile-friendly application today! Location: 78212 Must have the ability to pass a background check and drug screening test.

Requirements EDUCATION: Must have a High School Diploma or equivalent. Electrical trade training preferred. EXPERIENCE: Licensed Electrician with oil and gas industry experience preferred. Must have at least two - five (2-5) years electrician experience within an oil and gas production plant/facility. Knowledge of hazardous location wiring (NEC, IEC, or ATEX standards). Experience with motors, transformers, control panels, and instrumentation. Strong troubleshooting skills and ability to work in high-risk environments. Willingness to work in remote locations and adapt to challenging conditions. OSHA, H2S, and other relevant safety certifications are a plus. Extensive hands-on experience working with a variety of electrical systems, including single-phase 240V, three-phase 480V, and three-phase 796V. Familiar with both primary and secondary high-voltage lines. Proficient in the installation, maintenance, and troubleshooting of transformer banks, including 25 kVA and 100 kVA three-phase systems. SKILLS: Must have the following skills and/or abilities: In depth knowledge of oil and gas industry. Proficiency with the National Electrical Code (NEC). Proficiency with reading electrical drawings, schematics, wiring diagrams, code specifications. In depth knowledge of the standard methods, materials, tools and equipment used in electrical installation, testing, repair and maintenance in the oil and gas production industry. Working knowledge of oil and gas processing equipment to include AC and DC motors and drives. Strong mechanical skills. Strong planning, organizational, delegation, and time management skills in order to set priorities and meet assigned deadlines. Strong problem-solving skills to develop feasible realistic solutions to problems, recommending actions designed to prevent problems from occurring, and resolving escalated issues when necessary. Strong knowledge of and adherence to company and OSHA safety guidelines applicable to the work to include maintaining up-to-date safety knowledge. In depth knowledge of lockout / tagout procedures. LICENSES/CERTIFICATIONS: Must have a current Texas driver's license and a satisfactory driving record. Texas Journeyman electrical license preferred. PHYSICAL REQUIREMENTS: Must be able to perform the following physical activity on a frequent to constant basis: Stand for long periods of time. Lift 40-60 lbs. with or without assistance. Constantly uses fingers and hands. Ability to hear average or normal conversations and receive ordinary information through verbal communications in person or detect objects in and around job site. Average, ordinary visual acuity necessary to prepare or inspect documents; operate various types of machinery and handheld equipment. Walk short distances on slippery, even, and/or uneven surfaces. Stand, bend, stoop, kneel, crouch, twist, turn, or crawl. Climb and balance on stairs, metal/wooden beams, ladders, or other structures/elevated areas. Able to distinguish colors. WORKING CONDITIONS: Work primarily at job site performing work in outdoor weather conditions with exposure to extreme cold, heat, and noise depending upon project site; and may also include the following: dust, fumes, cleaning chemicals, and/or other harsh/hazardous solvents or disinfectants electrical components, power lines, or other electrical hazards rebar, blades, or other sharp objects/tools high elevations, trenches, or crawl spaces Possible travel locally during the work day between jobsites, although some out-of-area travel may be expected with seldom overnight travel. OTHER REQUIREMENTS: Must be able to: Adhere to and perform functions according to company and OSHA safety guidelines. Work in a cooperative team environment. Adhere to the highest standards of ethics, integrity, professionalism, and discretion. Project a courteous, professional and positive approach with clients, subcontractors, employees, and authorizing agencies while providing prompt, efficient, and accurate assistance. Support a culture of customer satisfaction. Follow and exchange basic instructions, information, and guidelines. Make independent decisions based on experience or knowledge with minimal supervision. Direct, instruct, and demonstrate procedures and techniques to helpers or other crew members to cross-train and/or develop skills and abilities. Participate in training and development opportunities offered to maintain knowledge of electrical code, current practices and safety knowledge.

Lone Star Corporation is searching for an Apprentice to assist install, repair and maintain electrical and auxiliary equipment. Looking for a full time candidate with strong worth ethic that takes pride in their work so that can ensure quality work is completed in a safe and timely manner. Daily Activities Assist the electrician in the various aspects of electrical maintenance, repair and construction. Prepare and assemble various apparatus required for particular work being performed. Keep work areas clean and organized. Pickup scrap wire, boxes, and other discarded materials. Assist with cleaning protective equipment (hot sticks and rubber goods). Use of various hand and power tools. Assist with loading of various materials onto trucks and/or trailers. Must be knowledgeable with the materials needed and process to strip and terminate cables. Ability to perform duties involving prolonged standing, sitting, crouching and/or stooping. Ability to push, pull, and position tools, equipment, and structural material weighing in excess of 100 pounds. Ability to accurately read and record meter data. Comply to all company policies and procedures Any other duties as assigned Position Requirements Must have 2 years of electrical experience Must have valid drivers license Must be able to pass drug test Open availability and must be willing to travel as work is subject to stand-by, pre-arranged and/or call-out duty High School Diploma/GED Benefits Benefits include medical, vision and dental insurance, 401K retirement savings plan, company paid life insurance and paid time off. Our company maintains a strong policy of equal employment opportunity for all associates. We hire, train, promote and compensate associates on the basis of personal and professional competence and potential for advancement without regard for race, color, religion, sex, national origin, age, marital status, disability or citizenship, as well as other classifications protected by applicable federal, state or local laws. About Lone Star Corporation Lone Star prides itself on the reputation that it has built providing instrumentation and electrical installation and maintenance for a wide variety of heavy industrial markets. Our 100% commitment to customer satisfaction ensures that our clients have a competitive advantage on all of their electrical projects. Our goal is to improve value without sacrificing quality, reliability or excellent service. Quality work demands quality people so apply today!

As an Apprentice Electrician 4, you'll advance your expertise in the electrical trade, building upon the knowledge and skills acquired during your previous years of apprenticeship. This role requires a thorough understanding and proficiency in various aspects of electrical installation, maintenance, and repair. You'll work closely with experienced electricians to refine your abilities and take on more complex tasks within commercial and industrial settings. Responsibilities * Accurately identify and organize all materials used in the electrical trade. * Proficiently plan and execute underground installations with precision, adhering to provided specifications. * Confidently perform all aspects of rough-in installations with minimal supervision, including proper use of all associated tools and equipment. * Demonstrate advanced skills in hand bending EMT, with proficiency shown in bending larger EMT and rigid conduit using mechanical and table benders. * Install panel interior and pull feeders with little to no supervision within one-line systems, including proper use of all associated tools and equipment. * Assist in the setting and assembly of SES (Service Entrance Section) and transformers as part of electrical system installations. * Contribute to branch power system installations, including disconnect and homerun installations, terminations, branch circuit pulling, and fuse and rejection clip applications with minimal supervision. * Provide comprehensive support to journeyman electricians with a wide range of tasks as needed. * Identify and interpret complex symbols, layouts, and scales on blueprints with precision, with the ability to manage a small scope. * Maintain a clean and safe work environment. * Follow all safety protocols and regulations. * Adhere to our internal tool policy and demonstrate a proactive willingness to invest in and maintain the necessary tools required for the trade. Qualifications * High school diploma or equivalent. * Minimum of three years of prior experience in commercial electrical installation. * Must hold a valid State of Texas TDLR card. * Previous enrollment in an accredited apprenticeship program is preferred. * Demonstrated ability to handle more complex tasks and responsibilities. * Increased willingness to take initiative and ownership of projects. * Proficiency in all materials used in the electrical trade. * Proficiency in underground and rough-in installations. * Advanced proficiency in hand bending EMT with comprehensive knowledge in mechanical and hydraulic bending techniques. * Strong willingness to learn and a positive attitude. * Excellent communication and interpersonal skills. * Ability to work independently or under the supervision of a journeyman electrician with a high level of efficiency and accuracy. * Knowledgeable in chapters 1 through 4 of the NEC, with the ability to navigate and apply code effectively. * Commitment to safety and quality. * Valid driver's license and reliable transportation. * Willingness to work flexible hours and overtime as needed. Physical Requirements * Demonstrated capability to execute a wide range of physical movements, encompassing bending, stooping, crawling, climbing, kneeling, balancing, pushing, pulling, and reaching overhead. * Proficiency in lifting objects exceeding 50 lbs, adeptly handling substantial electrical equipment and materials such as light fixtures, wires, conduits, junction boxes, motors, and related items. * Skilled in working at varying heights utilizing tools such as A-Frames, extension ladders, boom lifts, scaffolds, and aerial work platforms. * Competence in performing trenching and excavation tasks as required. * Keen visual acuity (normal or corrected) and ability to accurately discern and differentiate wire colors. * Strong capability to stand for extended durations, approximately 90% of the workday. * Adeptness in transporting materials between locations or across different levels. * Proficiency in handling tools above head level for various tasks. * Ability to work comfortably in confined spaces.

Looking for an electric lineman to complete installation and repairs of overhead and underground power lines, poles, transformers and related equipment. Key Responsibilities Installation & Maintenance: Stringing cables, setting poles, installing transformers, meters, and other electrical apparatus. Repair & Troubleshooting: Identifying and fixing faults, responding to outages, and replacing defective equipment like insulators, fuses, and switches. Safety & Inspection: Testing lines, clearing hazards (like trees), and strictly following safety procedures for energized and de-energized lines. Equipment Operation: Operating bucket trucks, cranes, trenchers, and other heavy machinery. Documentation: Reporting progress, issues, and material needs to supervisors. Essential Skills & Qualifications Technical Knowledge: Understanding of electrical theory, power distribution systems, and electrical safety. Physical Stamina: Strength, balance, and ability to work at heights and in various weather conditions. Problem-Solving: Strong analytical and troubleshooting skills to diagnose complex issues. Certifications: Completion of an apprenticeship program is typically required. License: May require a Commercial Driver's License (CDL). Work Environment Outdoors, at significant heights (poles, towers) or in confined spaces. All weather conditions, including extreme heat, cold, and storms.

Yellowstone Local is proud to represent The Perfect Light, an industry leader in outdoor lighting and now expanding into residential electrical services. You're not just an electrician, you're a pro who wants more. More respect. More responsibility. More opportunity. If you're ready to help launch a brand-new division with a company trusted by tens of thousands of Texans, The Perfect Light wants you. What's in it for You? Competitive pay of $70,000 - $110,000, inclusive of bonuses and commissions Consistent year-round work with growth into new markets (starting in Houston, then Dallas) Full-time schedule with opportunities for overtime Yearly wage increases tied to skill development Company truck (your mobile billboard), stocked and ready An iPad with high-end software will be provided Paid training and hands-on development Career advancement opportunities as we build this new division Ongoing training, including Journeyman exam preparation Work with a passionate, customer-first team in a growing and stable company Why You'll Love It Here Be part of something new: You'll be a foundational hire in a growing electrical division Loyal customer base: 10,000+ homeowners already trust us with lighting; now we're expanding your services to them Respect the trade: We don't cut corners, we invest in tools, training, and YOU Team-first culture with strong leadership, clear goals, and no micromanaging A mission-driven company that creates joy for customers all year long Your New Role Based in Houston, TX, you'll work directly with homeowners, performing service calls, installations, and diagnostics. This includes identifying electrical issues, providing safe and effective solutions, educating customers, and ensuring all work meets code. You'll work closely with other teams and help support the expansion of our new Electrical Division across Texas. What You'll Do: A day and week in the life Deliver high-quality residential electrical service: Diagnose, repair, and install electrical systems, including panels, circuits, wiring, outlets, lighting, breakers, and related components, ensuring all work meets code and safety standards. Lead customer education and service options: Explain findings, present repair or upgrade options, and ensure customers fully understand the work being performed to support informed and confident decisions. Execute efficient troubleshooting and diagnostics: Identify root causes of electrical issues, document findings, and recommend long-term, safe, and cost-effective solutions. Maintain professional field operations: Uphold a clean, organized truck and jobsite; complete paperwork and invoices accurately; and use company-provided technology (iPad, software, etc.) to support timely, clear reporting. Adhere to safety practices and compliance requirements: Follow NEC, local code, and company safety protocols; ensure proper PPE usage; and support a culture focused on protecting people, property, and equipment. Support division growth and cross-team collaboration: Coordinate with the lighting and sales teams on customer needs, support follow-up inspections, and contribute to a high-trust culture as the division expands into new markets. Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. High school diploma or GED Minimum 2 years of experience in the electrical trade (Apprentices are welcome to apply) Must have at least a Wireman license; Journeyman license preferred ServiceTitan experience is a plus Valid driver's license and clean driving record Strong customer communication and sales-minded approach Familiar with residential electrical code, safety practices, and troubleshooting Ability to lift 50 - 75 lbs, climb ladders, and work in crawl spaces or tight areas Must be a self-starter with flexibility in hours and schedule Comfortable using power tools and electrical diagnostic equipment Able to pass a drug test The Perfect Light is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

SUMMARY Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. RESPONSIBILITIES - Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints insuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. - Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. - Pulls wiring through conduit, assisted by helper. - Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. - Connects wiring to lighting fixtures and power equipment using hand tools. - Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools. - Connects power cables to equipment and installs grounding leads. - Test continuity of circuit to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. - Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. - Disassembles and repairs defective electrical equipment or systems. - Load, transport and unload material, tools, equipment and supplies. - Maintains tools and equipment. - Be able to distinguish colors. - Knowledge of certain procedures such as LOTO, etc. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Auxiliary Date Available: 09/01/2023 Attachment(s): * 5 - Electrician Journeyman Facilities 07-20 rev.docx

Responsibilities Responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment. This includes work from power plants to the meters of customers homes. Additionally, a lineman digs trenches for the installation of underground lines, install meters, climb poles to repair overhead lines and inspect power lines for possible repair or replacement. Qualifications High school diploma as well as the successful completion of a four-year apprenticeship is required to become a lineman. Possess excellent problem-solving, troubleshooting and organizational, and analytical skills. Must have a valid CDL license

PLEASE UPLOAD HS DIPLOMA/GED, RESUME AND TEXAS DRIVER LICENSE REQUIRED: High School Diploma or General Equivalency Diploma (GED) required in English. Over three (3) years of related experience. A considerable knowledge of the specialized field of electrical repairs and electrical codes. A valid Texas Driver's License and an acceptable driving record. PREFERRED: Journeyman's license. DUTIES AND RESPONSIBILITIES Plans new or modified installations to minimize waste of materials; provides access for future maintenance, and avoids unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes. Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Measures, cuts, bends, threads, assembles, and installs electrical conduit; pulls wiring through conduit. Splices wires by stripping insulation from terminal leads, twisting or soldering wires together and applying tape or terminal caps. Connects wiring to lighting fixtures and power equipment. Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels. Connects power cables to equipment, such as electric range or motor, and installs grounding leads. Tests continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter, battery, and buzzer, and oscilloscope. Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement. Replaces ballasts, switches, outlets, fuses, circuit breakers, defective wiring, kiln elements, stove controls, motors, controls, thermostats, etc. Repairs faulty equipment or systems. Cuts and welds steel structural members. Drives District vehicles to and from work sites; obeys all traffic laws. Strives to promote the safety, health and comfort of students and employees in the performance of duties. Follows established safety procedures and techniques to perform job duties. Maintains confidentiality at all times. Maintains a high level of ethical behavior as is expected of all District employees. Maintains professional growth by attending in-service and meeting as requested/required. Performs any other duties as assigned by the Supervisor/Director.