Electrician jobs in Louisiana - 228 jobs

**Job Posting End Date** 01-19-2026 Please note the job posting will close on the day before the posting end date Perform all types of work involved in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required. The following list sets forth the principal duties required with the degree of supervision normally given. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task. IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. GENERAL SUPERVISION - An employee of equal or higher classification, knowledgeable of the task at hand and not necessarily at the job site. QUALIFIED PERSON - Station Electrician or Supervisor who is knowledgeable of the task or work to be performed, and is capable of performing the appropriate emergency rescue. **Job Description** *** Applicant MUST reside 30-mile radius of the Arsenal Hill Power Plant*** ESSENTIAL JOB FUNCTIONS: 1) Work on energized equipment up to 260 volts. After six months in classification, employee shall assist in work on conductors and equipment energized at voltages above 750 volts with direct supervision or assistance of personnel in higher classification. Select proper prints and/or drawings for various work and have a basic understanding of each. Use voltmeters, ohmmeters, ammeters, insulation meggers and other test equipment associated with station work. 2) Assist in disassembling and reassembling, inspecting, maintenance, and repairing of station transformers, circuit breakers, portable substations, rotating machinery, network protectors and transformers, air ducts and heat exchangers; install and maintain station batteries; replace nitrogen bottles and air filters. 3) Assist in station work such as installing conduit, pipe, cable and wire; use hand lines to pass tools and materials; dig and backfill trenches; remove and spread stone; uncrate equipment and material; install and remove portable substation fences, barriers and safety signs; paint structures and equipment; climb station structures. Use various kinds of tapes, insulating materials, protective and insulating paints and varnishes, and understand proper application of each. 4) Assist in making visual inspections such as check lights, heaters, circuit breaker counters, oil levels, and bus connections; read gauges such as voltmeters, ammeters, hydrometers, pressure and level gauges; apply start-run-stop tests on emergency generators, water and sump pumps and fire engine motors. Report abnormal conditions. Replace lamps, switches, duplex outlets, dry cells; install and maintain signal and communication systems. Assist in various tests involving oil samples, connecting and operating portable and stationary oil handling equipment. Assist in electrical tests, TTR, Doble, core megger and resistance for transformer testing, etc. 5) Assist in station switching including use of radio communication and/or direct instruction from higher classification, assist in checking equipment clearances and making de-energized tests, place grounds as directed. 6) Knowledge and proficiency in steel and aerial lift rescue. 7) Maintain records and prepare and submit reports as required. 8) Attend and participate in training and assist in the training of other employees as assigned. 9) Use and operate various company vehicles, specialized equipment, hand and power tools. Operate company vehicles, cranes, aerial lifts and specialized equipment. Perform duties incidental to the operation of such equipment Use hand and power tools; operate portable generators, blowers and pumps; inspect and store personal protective equipment. Knowledge and use of various knots used in station work. 10) Perform similar or less skilled work as assigned. 11) Assist employees of equal or higher classification; direct the work of employees assigned to assist. 12) Become familiar with the Company's safety rules and practices and in the application of resuscitation and First Aid as presented in the Company's Safety Manual. Perform duties in accordance with the Company's safety rules and operating regulations and practices. MINIMUM REQUIREMENTS: Education requirements are listed below:Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor.Work Experience requirement listed below:No previous work experience required. OTHER REQUIREMENTS: Must be available to work overtime, call-out overtime and shift work, as required.Travel requirements are expected > 50 % of the time Physical demand requirements details are listed below: Distance in feet to climb and work on a ladder/structure: 50 ft and higher Knowledge of print reading sufficient to interpret and apply information from drawings, instruction manuals, one-line diagrams, and associated documents. Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression, or vacate the current classification. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Station Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Ability to deal with customers and other employees in a courteous and professional manner. Ability to plan work and to properly instruct and brief others. Employee shall obtain the appropriate valid commercial driver's license prior to the end of the designated probationary period. Must meet all vehicle operation requirements ad designated by federal and/or state law. Considerable travel and overtime may be required to complete work assignments. Must successfully complete Physical Abilities Test (PAT) PHYSICAL DEMANDS: physical demands required for this job include but not limited to: Minimum Requirement Station Electrician Amount of Weight Lifted from Floor/Ground to Waist Level: 75 Amount of Weight to be Carried for 20 Feet: 60 Amount of Weight Lifted to Chest Level:50Amount of Weight Lifted to Eye Level:30 Distance to Walk Accumulated over the Course of an 8-Hour Shift:½ Mile Distance in Feet to Climb and Work on a Ladder/Structure:50 and Higher Distance in Feet to Ascend to and Work in a Bucket/Lift:100 and Higher (Tested at 60') Ability to Discriminate between Colors:Yes (Tested) **Compensation Data** **Compensation Grade:** U072-R30 **Compensation Range:** $36.05 - $53.36 The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. **Hear about it first!** Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Electrician Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. RESPONSIBILITIES Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints insuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. Pulls wiring through conduit, assisted by helper. Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. Connects wiring to lighting fixtures and power equipment using hand tools. Installs control and distribution apparatus, such as switches, relays and circuit-breaker panels, and fasten in place with crews or bolts using hand or power tools. Connects power cables to equipment and installs grounding leads. Test continuity of circuit to ensure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. Observes the functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. Disassembles and repairs defective electrical equipment or systems. Load, transport and unload material, tools, equipment and supplies. Maintains tools and equipment. Be able to distinguish colors. Knowledge of certain procedures such as LOTO, etc. Responsible for observing and complying with all safety and project rules. Performs other duties as required. Rate information using personal judgment or standards that can be measured or checked Work within precise limits or standards of accuracy. Perform a variety of duties which may change often. Perform arithmetical operations rapidly and accurately. See detail in objects or drawings as 3-dimensional objects. PHYSICAL REQUIREMENTS Work in exposure to region weather (Heat/Cold/Rain). Work at heights without fear- possibly 150 ft or more Climb and Utilize ladders up to 20 ft in height Pick up and carry work materials- (possibly up to 50 lbs). Ability to use P.P.E. (personal protective equipment) Ability to hear and respond to audible emergency alarms and warnings Requirements TDLR 5+ years' experience Effective written and verbal communication Ability to pass a DISA Background Check Ability to pass DISA Drug Screen US Citizen or Legal Work Authorization

FLSA: Non-Exempt QUALIFICATIONS: * Must have 5 years experience in electrical field * Good knowledge of industrial/commercial electrical work with experience with building services, switch gear, electric motors and pumps, computer cables, control wiring * Good knowledge of local, state and national electrical codes REPORTS TO: Supervisor of Facilities SUPERVISES: Helpers JOB GOAL: To assist the Supervisor of Facilities in providing facilities that are properly maintained and conductive to a learning environment TERM: Twelve (12) months SALARY: MD-115 PERFORMANCE RESPONSIBILITIES: 1. Perform electrical work as directed or required by work order 2. Be diligent in performing work in safe manner 3. Maintain a clean and orderly work environment 4. Maintain written records as required and directed 5. Be responsible and use good judgment in the purchase of job materials 6. Operate any vehicles in a safe manner and follow policies as directed 7. Perform work in a professional and timely manner 8. Follow Rapides Parish School Board policies 9. Perform any other duties assigned by the Director of Buildings and Construction 10. Sign in and out at each school and cooperate with all building personnel

Operates, maintains, and repairs power generation systems and their controllers. Provide analysis and implement corrective actions to maintain equipment and systems operation to ensure maximum efficiency and stable performance. Primary focus of position is the maintenance and troubleshooting of electronic control devices for generators, switch gear, and electrical distribution systems. Responsibilities Electrical Systems Maintenance * Maintains repairs, replaces and installs electrical systems to include, but not limited to, switches, fixtures, motors, transformers, controllers, associated electronic components, distribution and wiring. * Completes periodic inspections, recurring maintenance requirements and associated documentation. Maintains systems to conform to written guidelines and applicable changes. * Acts as plant operator for electrical and power generation using work orders, parts requests, drawings/schematics/blueprints and manuals in order to accomplish assigned duties. Maintain systems knowledge * Knowledgeable of cathodic protection, communications, and grounding systems. Training and troubleshooting * Develops and provides training to other technical staff and performs comprehensive troubleshooting and repair. Other duties * Performs other duties as assigned or requested. Qualifications Experience Five years experience as an Electrician with one year in maintenance, repair, and operation of electrical power generators Education High school diploma or equivalent Licensure Valid LA Driver's License

About the Role We are seeking an experienced and dependable Electrician to join our maintenance team. The ideal candidate will be responsible for installing, maintaining, and repairing electrical systems and equipment in accordance with applicable codes and safety standards. This position plays a key role in ensuring facility operations run safely, efficiently, and reliably. Key Responsibilities Install, inspect, maintain, and repair electrical wiring, lighting, fixtures, panels, and related equipment. Diagnose and troubleshoot electrical issues using proper testing tools and techniques. Perform preventive maintenance and inspections to minimize downtime and maintain safety. Read and interpret blueprints, schematics, and technical diagrams to complete installation and repair work accurately. Ensure all electrical work complies with the National Electrical Code (NEC) and local regulations. Collaborate with maintenance and construction teams on renovations and facility upgrades. Maintain accurate documentation of work performed and materials used. Follow OSHA safety protocols and company safety procedures at all times. Qualifications High school diploma or equivalent required; completion of an electrical apprenticeship or trade certification preferred. Minimum of 3 years of electrical experience in commercial, industrial, or facility maintenance settings. Strong understanding of electrical systems, components, and safety codes. Proficiency with electrical testing tools, hand tools, and power equipment. Ability to lift up to 50 lbs, climb ladders, and work in confined spaces or at heights. Valid driver's license required; journeyman or master electrician license preferred. Preferred Skills Experience with generators, control panels, or low-voltage systems. Knowledge of building automation and energy management systems. Basic familiarity with related trades (HVAC, plumbing, or carpentry). Strong problem-solving and teamwork skills. Location: - Statewide, Louisiana (Various Parishes) - Iberville, St. Helena, East Feliciana, West Feliciana, East Baton Rouge, West Baton Rouge, Livingston, Pointe Coupee, St. John, St. James, Assumption, Lafourche, Terrebonne, St. Charles, Evangeline, St. Landry, Acadia, St. Martin, Lafayette, Iberia, St. Mary, Vermillion, Beauregard, Allen, Calcasieu, Jefferson Davis, Cameron, Winn, LaSalle, Grant, Catahoula, Concordia, Rapides, Avoyelles, Vernon, Caddo, Bossier, Webster, Claiborne, Lincoln, Natchitoches, Sabine, Red River, Bienville, De Soto, Union, Morehouse, West Carroll, East Carroll, Ouachita, Madison, Caldwell, Franklin, Tensas, Richland, Jackson. View all jobs at this company

Requirements Electrician Job Requirements:· Must provide your own hand tools to get the job done Able to perform 8+ hours of physical labor each day in varying temperature extremes and other outside conditions Able for FT work including night and weekend shifts Ability to operate a smart phone technology Able to pass math & reading test Must have a valid Drivers License & reliable transportation Legally eligible to work in the US Pre-employment background screening (criminal, drug screen and DMV) is required for all positions Benefits Package Includes: Top industry weekly pay Daily travel per diem of $50.00 Outstanding Health Benefit Package Nine Company paid holidays Generous PTO Program 401k with 100% company match (up to 6%) Company Paid Life Insurance Employee referral program Training and Career Growth Opportunities We offer challenging projects, outstanding benefits and training opportunities. COME BUILD YOUR FUTURE WITH US! Williams & Rowe is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. We promote a Drug-Free Workplace.

Operates, maintains, and repairs power generation systems and their controllers. Provide analysis and implement corrective actions to maintain equipment and systems operation to ensure maximum efficiency and stable performance. Primary focus of position is the maintenance and troubleshooting of electronic control devices for generators, switch gear, and electrical distribution systems. Electrical Systems Maintenance * Maintains repairs, replaces and installs electrical systems to include, but not limited to, switches, fixtures, motors, transformers, controllers, associated electronic components, distribution and wiring. * Completes periodic inspections, recurring maintenance requirements and associated documentation. Maintains systems to conform to written guidelines and applicable changes. * Acts as plant operator for electrical and power generation using work orders, parts requests, drawings/schematics/blueprints and manuals in order to accomplish assigned duties. Maintain systems knowledge * Knowledgeable of cathodic protection, communications, and grounding systems. Training and troubleshooting * Develops and provides training to other technical staff and performs comprehensive troubleshooting and repair. Other duties * Performs other duties as assigned or requested. Experience Five years experience as an Electrician with one year in maintenance, repair, and operation of electrical power generators Education High school diploma or equivalent Licensure Valid LA Driver's License

In 2019, T. Parker Host acquired United Bulk Terminals (UBT) on Mile 55 of the Mississippi River as one of the largest bulk terminals in the U.S. Gulf, specializing in coal and petcoke. This 1,200 acre property in Davant, Louisiana is capable of extensive loading, discharging and storage - with deep-water docks, fleeting capacity for 500 barges and over 40 pieces of heavy equipment to handle cargo loads. Since the acquisition, HOST has made extensive improvements in systems and equipment, making the facility safer, more environmentally friendly, and more efficient to better serve our customers. Position Summary: Install, maintain, diagnose and repair equipment/instrumentation related to the unloading, loading, transfer and storage of cargo including conveying equipment, AC and DC motors, PLCs and IO modules, VFDs and DC Drives, associated wiring and power supplies on ship loaders, stacker/reclaimers, continuous barge unloaders, bucket cranes and various support equipment. Essential Responsibilities and Duties: * Diagnose and repair equipment various equipment used to transfer cargo to/from barges and vessels by use of conveying equipment * Work from blueprints, wiring schematics, manuals or verbal instructions * Perform preventive maintenance on all terminal equipment * Complete work in a safe and timely manner in compliance with company and regulatory requirements * Safely operate various types of equipment related to transfer of cargo for testing purposes * Perform routine inspections on assigned equipment and report finding in accordance with policy and procedures * Accurately document information generated in support of operations to include but not limited to: receiving, shipping and storage of bio-mass. Maintenance inspections and safety related reports. * Participate in and successfully complete required training and related testing * Identify, report, and correct safety and environmental concerns. * Perform any other terminal functions as trained, requested and instructed by supervision. * Education, Knowledge, Experience, Skills and Abilities Required: * High School Graduate or equivalent required. * 5 years of prior industrial electrical experience. * Master Electrician-level knowledge/experience in troubleshooting at a component level of industrial electronic controls: VFDs/DC drives, PLCs, HMIs, industrial networks, and associated wiring. * Working knowledge of Ohm's Law. * Experience with Emerson (formerly GE) RX3i controllers and Machine Edition software preferred. * Ability to attain and maintain a Transportation Workers Identification Credential (TWIC). * Support Operations through the installation, programming, start-up and maintenance of electrical, automation and process control equipment * Responsible for installation, programming, calibration, preventive maintenance, troubleshooting, and repair of electrical and automation equipment in order to improve plant system operation/uptime and reduce total operating costs * Support all types of facility systems including Emerson PLCs, Control Techniques VFDs and DC Drives, SEL MV control and monitoring, bulk cargo belts scales, wireless radios and related equipment, 120v-4160v motor controls, and others. Experience with Medium Voltage motors and starters preferred. * Successful applicant will work closely with Operations, Engineering, Maintenance, Information Technology Groups * Thoroughness and attention to detail are required as a significant amount of time may be spent working with complex PLC programs and advanced process control systems * Will be subject to overtime and call-out work as needed. Other tasks may also be assigned to support Operations as necessary * Successful completion of background check. * Ability to maintain regular, dependable attendance. Physical Requirements: * Must meet "fit for duty" requirements upon job offer (pre-employment physical and drug test) * The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces * Ability to lift up to 50 pounds and work at protected heights up to 130 feet. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. * Perform work in dusty environment and all types of temperature/weather conditions. HOST, and its affiliated companies, is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. For more information, please visit ******************* or Apply Online Here

QPS- Quality Process Services Offshore Electrician 14&14 crew change out of Venice, LA Summery Assists in operations by maintaining all electrical equipment. Maintains current technical knowledge of government and company policies, codes and regulations Assists in operations by maintaining all electrical equipment. Receives written, diagrammatic, and/or verbal instructions and determines appropriate actions for all work performed. Prepares written work orders for other personnel to complete repair, maintenance, installation and testing tasks. Determines causes of defective performance and reports findings to supervisor. Repairs where appropriate, informs supervisor of repairs requiring a higher level of expertise. Replaces faulty wiring and electrical components such as relays, switches, motors, printed circuit boards and position sensing devices. Maintains records of repairs, calibrations and tests by entering data into handwritten logs or computer databases, where applicable. Maintains current technical knowledge of government and company policies, codes and regulations. Interprets readings of meters, gauges, pumps, compressors, instrument readings and charts to determine operational capabilities. Performs preventive and corrective maintenance on all electrical equipment. Prepares written or computer-generated purchase orders when necessary, maintains proper levels of equipment inventories. Responsible for following safety procedures and maintaining safety data. Responsible for participating in all safety training and assisting in safety procedures such as first aid, CPR, fire drills and emergency evacuation. May be required to travel to worksite via marine or helicopter transport. May be required to reside at worksite on a predetermined work schedule. Other duties as assigned.

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

Primary Responsibilities Responsibilities include performing electrical tasks safely including installation, troubleshooting, maintenance, testing, repairs on all plant electrical, electronic, and PLC equipment, and corrective and preventative maintenance. Behavioral Profile The candidate must be willing to learn, grow, and work independently and with others. He/she must be flexible, self-motivated with a can-do attitude, and be detail and action oriented. He/she must also demonstrate prioritization skills, the ability to multitask, cross-train, be committed to quality, and work with a sense of urgency. Job Qualifications The ideal candidate should have a high-school diploma or equivalent, 3 years of experience in industrial/electrical maintenance, and experience working in an industrial environment. The candidate must have knowledge of AC and DC power and control circuits, three-phase power circuits, and VFDs. Experience and understanding of PID process control loops and associated equipment is also required. The candidate must demonstrate mechanical aptitude, the ability to grasp complex concepts easily and pay attention to detail. Additionally, he/she must demonstrate an outstanding attendance record and verbal and written communication skills. Benefits Some of the benefits our team members enjoy include the following: Healthcare- Legacy Health & Wellness and Legacy Pharmacy Wellness Program Flexible Spending Account Additional Insurance Paid Time Off Retirement Chaplaincy Services Education About RoyOMartin At RoyOMartin, people are our number-one asset. We are committed to keeping them safe and supporting them as they learn and grow. There's just something unique about being in the people business: Our leaders are involved in daily operations and nurture personal relationships; our employees stick with us for the long term and appreciate our top-notch benefits, and we believe that everyone has the capacity to succeed. With superior product quality and outstanding customer service at the heart of our more than 1,200-person operation, RoyOMartin is proud to serve America's building industry. Through our Forest Stewardship Council (FSC ) certification, customers can be assured that we responsibly source our raw materials from regional forests to produce “Made in the U.S.A.” oriented strand board (OSB), plywood, timbers, and boards in safety-award-winning manufacturing environments. RoyOMartin is an Equal Opportunity Employer.

Who We Are Thermon is a diversified technology company and a global leader in industrial process heating, temperature maintenance, environmental monitoring and temporary power distribution solutions. We deliver engineered solutions that enhance operational awareness, safety, reliability and efficiency to deliver the lowest total cost of ownership. Thermon offers over 250 products, software and services across multiple brands, providing a range of offerings from boilers, transportation heaters, and liquid load banks to tubing bundles and heat trace. We are the silent guardians of critical infrastructure. From the relentless demands of chemical plants and the intricate networks of rail and transit to the vital pulse of power generation, we innovate solutions that ensure optimal operation, protect critical assets, and maximize efficiency. We care deeply about the success of our customers, the well-being of our people, and the reliability of every product we design. This drives our unwavering commitment to safety and integrity in everything we do. Through collaboration, we unite a rich legacy of expertise with a trusted global team, partnering side-by-side with our customers. We transfer the warmth needed to make life work. The Role Must be able to maintain an orderly in-field stock of materials, deliver materials to work stations in a prompt and precise manner, and assist/make cable pulls, running conduit, and erecting cable tray. Rate will depend on experience and passing electrician test. What You Will Do * Testing electrical and mechanical circuits for efficiency. * Testing, Reading, Operating, Maintaining, Repairing Electrical and Heat Trace systems. * Reading and comprehending electrical blue prints, schematics, one-line diagrams. * Install, test, and commission Electric Heat Tracing. * Following electrical codes and regulations set by the State of Texas and the US Gov. Proficient in reading and following directions, writing reports. * Unload delivery trucks. * Assembling, installing, maintaining, and repairing electrical and mechanical systems. * Performing maintenance and repair of electrical, interior, and exterior electrical components. * Available for Schooling and training. * Have your own hand tools. To be successful in this role you will possess * Industrial Construction Experience in a fast-paced business environment is a plus * High school and or trade school required. * Must put safety above all * Electrical License * NCCER certification/or equivalent work experience. * TWIC card required (Transportation worker Identification card) * Industrial experience. SCADA, PLC and Control Automation i.e. Energy Management Controls preferred * Proven history of leading, teaching, developing, and mentoring others successfully is a plus. * Professional, Organized and dedicated * Ability to handle stressful situations * Excellent communication and personal skills * Must be able to understand and communicate in English * Ability to perform work in industrial facilities in extreme ambient conditions including climbing staircases, or ladders We wish to thank all applicants for their interest, however, only those invited for an interview will be contacted.

←Back to all jobs at TREO STAFFING LLC Commercial and Residential Electricians TREO Staffing is looking for a Non-Licensed Electrician for residential homes. Key duties include: Install conduits, wiring, electrical panels and circuits Start up and test installed generator Troubleshoot electrical problems and repairs Communicate with customers regarding the install of the generator and/or transfer switch, as well as warranty information Adhere to all quality and safety codes Local travel will be required Minimum Qualifications: A technical, Associates Degree or certificate in a maintenance related field 3+ years of experience as an electrician PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to manipulate objects, tools or controls and talk or hear. The employee is regularly required to walk; stoop; crouch; bend and reach above shoulders. The employee must frequently lift and/or move up to 80 pounds unassisted and up to 100 pounds with assistance, waist high, up to 10 feet away. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Temperatures can vary from cool to warm depending upon the season.' ' Job Type: Full-time Pay: $20.00 - $30.00 per hour (depends upon Experience) Schedule: Monday to Friday Weekend availability Education: High school or equivalent (Preferred) Please visit our careers page to see more job opportunities.

Duties and responsibilities Maintain welding machines, forklifts, crawler cranes, wire feeders, and hand tools. Enter and work in confined spaces. Mechanical and electrical troubleshooting. Repair and overhaul of large and small machinery. Building maintenance. Maintain and repair painting/blasting equipment. Maintain and repair company trailers. Connect shore power to vessels. Maintain reports for all the above. Ascend and work at heights of up to 40 feet. Critical Demands Balance and strength to climb 40 ft. ladder. Repetitive forward bending, rotation of the trunk, and flexing of the hips and the knees. Lifting no greater than 50 lbs. from floor to 6 ft. work surface unassisted. Repetitive upper extremity movements while measuring, fitting, and welding. Working Conditions Work is outdoors or in an open warehouse. There is no air conditioning or heating. Uneven surfaces throughout job site, with sand, limestone, concrete, and railways outside, as well as concrete and railways inside. Numerous trip hazards throughout.

Electrician Grade C Pay Rate: $26.75/hr. Physical Location: Bogalusa Container Plant, 501 Avenue U, Bogalusa, LA 70427 The Job You Will Perform: * Troubleshooting equipment issues * Reading factory details * Accurately reading gauges and other test equipment * Utilizing basic shop math, inspecting * Accurately completing administrative documents and following directions

The Electrician position is responsible for conducting maintenance and repairs of instrumentation, automation, electrical and related systems. This position reports to the Electrical Foreman. This position resides at the St. Rose Terminal, but is also responsible for duties at the Avondale terminal. Responsibilities Electrical maintenance and repairs New electrical construction Perform work orders Troubleshoot instrumentation, automation and electrical issues Education and Experience High School Diploma or equivalent Ability to learn and adapt in a growing and changing environment Working knowledge of both high and low voltage systems as well as basic knowledge of instrumentation and automation Terminal maintenance experience Instrumentation and automation skills Knowledge of pump motors, VFD's, actuators and radars, transformers and control valve Ability to read and program logic in PLC's Valid Driver's License TWIC (Transportation Workers Identification Credentials) for access to IMTT's terminal locations. Skills and Abilities Clear and concise written and verbal communication skills in the English language. Ability to understand written and verbal communication in the English language. Ability to work independently and effectively in a team environment Ability to work closely with others with a positive attitude and a willingness to help others. Ability to represent IMTT in a professional and positive manner. Ability to manage numerous projects in a frequently changing work environment Compliance with all Company policies and procedures. Ability to interact with vendors, service providers, and employees in a professional and courteous manner. Good organizational skills and attention to detail. Supervisory and management skills. Effective in Microsoft Office software (Word, Outlook, Excel, etc) Hours of Work Typical hours of operation are Monday through Friday 7:00 am to 3:30 pm. This position requires overtime and occasional weekend work as job duties demand. Occasional travel may be necessary, sometimes with little or no advance notice. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Because the facility and adjoining facilities handle hazardous materials, the employee must be able to ingress and egress in foreseeable emergencies. The applicant must be able to work safely without presenting a direct threat to self or others. This would require the ability to lift to 25 pounds, bend, stand, or stoop, as necessary. Ability to perform climbing, bending, stooping, kneeling and moderate lifting. Must be able to work in confined spaces, over water and not be afraid of heights. The large scale of the operation and the extensive layout of the facility require that the employee can walk and stand on uneven terrain, to climb stairs and ladders, and traverse inclines: uphill, downhill or mixed. Must be able to work in a confined space, work over water, climb stairs and not be afraid of heights. Must be capable of wearing respirator and/or other PPE during some operations or emergencies. This job description is intended to describe the general nature and level of the work being performed. This is not an exhaustive list of all duties and responsibilities. The company reserves the right to amend and change responsibilities to meet business and organizational needs as necessary with or without notice. IMTT is an equal opportunity employer Minority/Female/Disabled/Veteran and a drug free workplace. We exercise high ethical standards and are committed to complying with all laws in the jurisdiction where we conduct business. Our internal policies and procedures support this commitment. If you like working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Licensed electrician capable of doing both construction and maintenance electrical work. Responsible for the installation, repair and maintenance of electrical equipment and fixtures. This is an Essential Personnel position, which can require that the incumbent must report for duty and work through emergencies, and also can be designated by the supervisor as essential for the accomplishment of work, or for the completion of a critical task. * Must be capable of receiving oral, written and diagrammed instructions regarding plumbing installations, troubleshooting and maintenance based on current codes. * Able to handle multiple projects * Ability to utilize TMA Facilities maintenance software on portable devices (e.g. iPod) * Ability and willingness to work evenings, weekends, and possibly holidays * Ability to be on call * High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. * Five (5) years' experience in electrical trade * Must hold a Journeyman's electrical license * Must have a valid and unrestricted (not including corrective lens needs) U.S. Driver's license and must meet the Tulane University Motor Vehicle policy criteria to become authorized as a driver

CSP is the industry leader in the formulation and molding of lightweight, advanced composite components for the transportation industries. As an innovative, full-service Tier One supplier, we offer an entrepreneurial environment where you're only limited by your own imagination. In addition to our team-focused environment, we provide industry-leading benefits, called BENEfits4U. Our comprehensive offering includes: affordable medical, dental, and vision care; flexible spending accounts; life insurance; 401k with company match and much, much more. Job Description The CSP Sarepta facility is seeking a Sr Maintenance Electrical Technician for 3rd shift. This position is responsible for providing technical support in maintaining "State of the Art" electronic controls in the facility. GENERAL FUNCTIONS AND RESPONSIBILITIES: Assist with troubleshooting and repairs of electrical and electronic controls on all plant equipment. Assist in upgrading electrical equipment and electronic controls. Develop control wiring schematics/maintain files. PLC Programming. Review product improvement ideas and recommend action to implement them. Assist in determining spare parts requirements. Provide machine design (electrical) proposals. Maintain all electrical upgrades on software and in hard copy in an orderly manner. Other duties as assigned by Maintenance Supervisor. It is the responsibility of all maintenance personnel to provide a basic set of tools and tool holder or bag. These tools should be with the technician at all times when performing maintenance functions. The basic set of tools should include, at a minimum, the following: Phillips screw drivers Flat head screw drivers Crescent wrench Set of metric Allen wrenches Set of SAE Allen wrenches Set of channel lock pliers Set of needle nose pliers Tape measure Diagonal cutting pliers Flashlight Small Knife MEASURES OF PERFORMANCE: Safety (Personnel and Equipment) Attitude and Dedication Dependability and Reliability Job Knowledge (trouble shooting ability) Communications Interpersonal skills Planning and organizing Cost improvement and waste management Support of a team environment KNOWLEDGE AND SKILLS REQUIRED: A.S. degree in electrical/electronics field or equivalent (3 years) in training and experience. Knowledge of basic machine design and setup. Minimum of 3 years experience in electrical/electronic troubleshooting. Good communication skills both written and verbal. Knowledge of PLCs and PLC programming. Note: Some qualifications may be waived at the discretion of the Department Manager. SCOPE AND IMPACT OF POSITION RESPONSIBILITIES: This position plays a key role in troubleshooting, maintaining and repairing major equipment necessary for the production of high quality products for our customers. Ensures safe electrical operations within the facility. PHYSICAL DEMANDS: Excellent health and physical condition required. Jobs consist of repetitive motion with good range of motion involving bending, stooping, walking, reaching and prolonged standing. Physical requirement of lifting and carrying up to 50 lbs. Personal protective equipment required for particular jobs. Knowledge of chemicals specific to job-some exposure to fumes. Must be able to work in close proximity to high temperature molds (290°F-450°F). Good eye, hand and foot coordination. Must have valid driver license and forklift license. MENTAL/VISUAL: Communication - written/verbal skills, good computer skills. Ability to work in stressful situations. Good math and documentation skills. Ability to recognize and respond to dangerous situations. Good interpersonal skills. Ability to work on own without constant supervision and daily instructions. WORKING CONDITIONS: Will be required to work in plant - factory environment where there is some exposure to noise, dust, glass fibers, fumes and heat. Must adhere to PPE requirements as defined in the safety manual when in the manufacturing area. Maintenance personnel are also required to wear steel-toe foot wear. If you enjoy innovation, and an opportunity to learn and contribute to a growing organization, CSP is the place for you!

Job Description In 2019, T. Parker Host acquired United Bulk Terminals (UBT) on Mile 55 of the Mississippi River as one of the largest bulk terminals in the U.S. Gulf, specializing in coal and petcoke. This 1,200 acre property in Davant, Louisiana is capable of extensive loading, discharging and storage - with deep-water docks, fleeting capacity for 500 barges and over 40 pieces of heavy equipment to handle cargo loads. Since the acquisition, HOST has made extensive improvements in systems and equipment, making the facility safer, more environmentally friendly, and more efficient to better serve our customers. Position Summary: Install, maintain, diagnose and repair equipment/instrumentation related to the unloading, loading, transfer and storage of cargo including conveying equipment, AC and DC motors, PLCs and IO modules, VFDs and DC Drives, associated wiring and power supplies on ship loaders, stacker/reclaimers, continuous barge unloaders, bucket cranes and various support equipment. Essential Responsibilities and Duties: Diagnose and repair equipment various equipment used to transfer cargo to/from barges and vessels by use of conveying equipment Work from blueprints, wiring schematics, manuals or verbal instructions Perform preventive maintenance on all terminal equipment Complete work in a safe and timely manner in compliance with company and regulatory requirements Safely operate various types of equipment related to transfer of cargo for testing purposes Perform routine inspections on assigned equipment and report finding in accordance with policy and procedures Accurately document information generated in support of operations to include but not limited to: receiving, shipping and storage of bio-mass. Maintenance inspections and safety related reports. Participate in and successfully complete required training and related testing Identify, report, and correct safety and environmental concerns. Perform any other terminal functions as trained, requested and instructed by supervision. Education, Knowledge, Experience, Skills and Abilities Required: High School Graduate or equivalent required. 5 years of prior industrial electrical experience. Master Electrician-level knowledge/experience in troubleshooting at a component level of industrial electronic controls: VFDs/DC drives, PLCs, HMIs, industrial networks, and associated wiring. Working knowledge of Ohm's Law. Experience with Emerson (formerly GE) RX3i controllers and Machine Edition software preferred. Ability to attain and maintain a Transportation Workers Identification Credential (TWIC). Support Operations through the installation, programming, start-up and maintenance of electrical, automation and process control equipment Responsible for installation, programming, calibration, preventive maintenance, troubleshooting, and repair of electrical and automation equipment in order to improve plant system operation/uptime and reduce total operating costs Support all types of facility systems including Emerson PLCs, Control Techniques VFDs and DC Drives, SEL MV control and monitoring, bulk cargo belts scales, wireless radios and related equipment, 120v-4160v motor controls, and others. Experience with Medium Voltage motors and starters preferred. Successful applicant will work closely with Operations, Engineering, Maintenance, Information Technology Groups Thoroughness and attention to detail are required as a significant amount of time may be spent working with complex PLC programs and advanced process control systems Will be subject to overtime and call-out work as needed. Other tasks may also be assigned to support Operations as necessary Successful completion of background check. Ability to maintain regular, dependable attendance. Physical Requirements: Must meet “fit for duty” requirements upon job offer (pre-employment physical and drug test) The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces Ability to lift up to 50 pounds and work at protected heights up to 130 feet. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Perform work in dusty environment and all types of temperature/weather conditions. HOST, and its affiliated companies, is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. For more information, please visit ******************* or Apply Online Here