Electrician technician jobs in Albuquerque, NM - 193 jobs

Journeyman Lineman Union U32 $54.09 Per Hour DEPARTMENT: TRANSMISSION AND DISTRIBUTION DUTIES: Under general directive supervision of working foreman or district foreman depending on assignment and location. Directs apprentices, skilled, and semi-skilled workers engaged in the construction, operation, and maintenance of overhead transmission and distribution lines and substations; may perform various duties by being assigned to investigating and correcting customer complaints; installing or cutting out service or meters; setting special meters as voltage, current, demand, or others; maintenance of street lights or other related duties which are consistent with his qualifications. Receives work instructions of a general nature and performs all assignments with established procedures. Performs construction duties by erecting and setting poles and towers; attaching necessary cross arms, transformers, circuit breakers, cut-outs, lightning arrestors, anchors, guys; stringing, sagging, insulating, attaching, and connecting conductors; installation of underground systems including circuit, laterals, vaults, and grounds; installation of underground cable, transformers, switch boxes, and similar equipment. Installs or may assist in cable construction by testing and tracing circuits in power systems; makes various types of connections between electrical conductors; insulates conductors properly for the voltage conditions under which they are to operate; seals cable joints within a waterproof housing such as lead sleeve wiped onto the lead-sheathed cables entering the joint; bonds and grounds lead-sheathed cables of all voltages; makes electrical connections between conductors and various types of equipment such as transformers, potheads, and terminal boxes; as required, may weatherproof or fireproof cables. Performs various distribution duties by testing for and locating electrical trouble on circuits; makes permanent or temporary repairs to restore services as quickly as is consistent with safety; restores equipment to normal operating condition; patrols and inspects equipment, making minor repairs and reporting equipment in need of major repairs; makes emergency cut-ins and cut-outs. Installs and removes lightening arrestors; fuses disconnecting switches, oil and air breakers switches, and related overhead line devices. Installs and services transformers; tests transformers in service by induction coil devices and makes replacement when necessary. Installs street lighting equipment and replaces cables, poles, conduits, and auxiliary equipment. Instructs personnel in the proper and safe way to perform their duties and instructs and trains new men in the use of tools and equipment; provides safety training instructions and is responsible for the general safety of personnel and in the administering of first aid to injured persons when necessary; caution and use of safety devices such as rubber protective equipment and hot-line tools; conforms with all safety rules and policies as established by the Company. Performs other related and assigned duties. #PNM DOT STATEMENT This position performs one or more covered or "safety sensitive" tasks that are regulated by the Department of Transportations (DOT) natural gas pipeline or commercial motor vehicle driver related regulations. Both types of jobs require that all individuals meet specific criteria, training, and pre-employment qualifications as defined by the DOT, which may include physical examinations and/or successful background information as required for the specific job. SAFETY AND ADA STATEMENT Safety Statement: Safety is a core value at (TXNM Energy/PNM/TNMP) and our vision, "everyone goes home safe", reflects our commitment to promoting an environment conducive to learning, improving and building safety practices. Our safety value is built upon the belief that every employee deserves to work in an environment free from harm. Americans with Disabilities Act (ADA) Statement: If you require assistance with the job application process due to a disability, please contact HR ADA Analyst, at ************.

Join Solar Works Energy, the largest residential solar installer in New Mexico. We are looking for a licensed Journeyman Electrician to help us continue delivering top -tier solar energy solutions to our customers. This is your opportunity to work with a fast -growing company in the solar industry, providing stable employment and opportunities for advancement. What We Offer: Competitive pay of $40 -50/hour Full -time, stable employment with New Mexico's largest residential solar installer Opportunities for career growth in the rapidly expanding solar industry Positive and supportive work environment Paid training on solar installations and safety protocols Responsibilities: Install, maintain, and troubleshoot solar PV systems for residential and commercial projects Ensure all electrical systems comply with local and national electrical codes Collaborate with solar installation teams to complete projects efficiently and safely Diagnose and repair electrical issues related to solar systems Perform regular maintenance and inspections of solar power systems Work with customers to provide excellent service and answer technical questions Requirements Valid Journeyman Electrician License Proven experience in electrical installation, repair, and troubleshooting Knowledge of local and national electrical codes Ability to work independently and within a team Strong attention to detail and commitment to safety Prior experience with solar systems is a plus, but not required (training provided) BenefitsWhy Solar Works Energy? At Solar Works Energy, we are passionate about making a difference in our community by providing clean, renewable energy solutions. With our focus on teamwork, innovation, and excellence, we create an environment where our employees can thrive and grow in their careers. We also value work -life balance and a positive company culture, which is why we invest in our team's growth and well -being.

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: We are seeking a skilled Electromechanical Technologist to join our team. In this role, you will play a crucial part in the design, implementation, and maintenance of data acquisition and control systems. Your expertise will help ensure the reliability and efficiency of our operations, contributing to the overall success of our projects. You will collaborate with cross-functional teams to identify and address technical challenges, fostering a culture of innovation and continuous improvement. On any given day, you may be called on to: + Provide designs, controls, and engineering support for data acquisition and control systems. + Conduct testing and oversight of existing data acquisition and control systems. + Maintain data acquisition and control systems software and hardware. + Implement software data analytics routines into programs for non-technical operators. + Assist with the implementation and commissioning of contractor-supplied software into current and future operations control and data acquisition systems. + Troubleshoot problems and implement workable solutions as required. Due to the nature of the role, this candidate must be able to work onsite. Salary Range: $72,800 - $140,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + High school diploma or higher degree plus three (3) or more years of related experience + Experience in operating and set up of oscilloscopes and soldering and/or standard electrical engineering measurement and test equipment such as power meters/sensors, and signal/waveform generators + Able to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire: + Current Certified LabView developer (LCD) accreditation from National Instruments + Electromagnetic Impulse troubleshooting skills, control circuit theory and design + Experience with network analyzers and spectrum analyzers + Demonstration of at least one LabView controls/data acquisition project (minimum of 100 vi s) from inception to completion to include final documentation. + Demonstrated experience creating, storing and retrieving software from repository systems (i.e. GitHub or Sub-Version). + Experimental RF systems experience (theory/troubleshooting/maintenance). + Strong technical writing skills and the ability to prepare effective documentation. + Ability to work on programs that require adherence to standards and requirements. + Excellent interpersonal and communication skills as well as personal initiative, responsiveness, attention to detail and organization skills to handle multiple tasks and deadlines. + Willingness to tackle problems in a highly collaborative environment. + Ability to meet challenging design requirements and deliver results while meeting timelines within cost, schedule, and performance. + Active DOE Q-Level security clearance. About Our Team: The Above Ground Testing (AGT) Accelerator Operations (1332) department is responsible for the operation of the Saturn, HERMES III, and SPHINX pulsed power accelerators. The primary objective of the department is to provide an applied research environment for the study of radiation effects on materials and electronics. The three accelerators generate electrical pulses of up to 20 million Volts and up to 12 million Amperes with nanosecond duration in order to create extremely intense pulsed radiation environments for the study of radiation effects sciences. Department 1332 also conducts pulsed power research and development to: improve radiation source fidelity, increase the output and fluence, as well as to improve the overall reliability and reproducibility of the accelerators. These unique, world class facilities are an essential part of the NNSA s Stockpile Stewardship Program. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Position Information: This Limited Term Employee (LTE) position is a temporary position for one year term, which may be renewed at Sandia's discretion up to a maximum of seven years. Individuals in LTE positions may bid on regular Sandia positions as internal candidates, and in some cases may be converted to regular career positions during their term if warranted by ongoing operational needs, continuing availability of funds, and satisfactory job performance. Essential Functions: If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Job ID: 696596 Job Family: RD Regular/Temporary Position: T Full/Part-Time Status: F

We are a (rad hard) team of builders, breakers, and fixers - delivering pulsed-power systems to accelerate the world's transition to fusion. Customers span defense, energy, and aerospace; our pulsed-power platforms (e.g., TITAN, Z-STAR) support nuclear effects testing now and fusion plants tomorrow. About the Role You will be responsible for the assembly, wiring and plumbing on electromechanical systems. Systems include vacuum, power generation, pulse forming section and oil system. You must be able to read mechanical and electrical drawings to be able to assemble, field and troubleshoot these complex systems. Job Requirements Assemble racks, HV/LV harnesses, enclosures, panels, and motion/actuation subsystems. Install pumps, valves, seals, gauges; leak-check and maintain oil and vacuum systems. Mount sensors, route signal cabling, and bring up data acquisition system (DAS)-oscilloscopes, probes, DMMs, and troubleshoot connection issues. Read schematics and harness drawings; crimp/terminate to specification; label, route and document work. Run electrical checkouts, resolve system noise, troubleshoot high voltage (HV) systems, and restore electromechanical systems to operational status. Preventive/corrective maintenance, spares, calibration, and readiness of tools and materials. Responsible for calibration of oscilloscopes, power supplies, etc.- Execute HV/LOTO, ESD, rigging, and lift plans, proper use of PPE; maintain clear and concise safety records. Capture build notes, monitor/maintain electromechanical systems, and feed improvements back to engineering. Minimum Requirements 3-7+ years experience building and integrating complex electromechanical systems (emphasis in pulsed power). Mastery of hand tools and metrology; expertise in electrical wiring and safety. Experience working with high voltage/high current systems and precision timing of operations. Ability to read mechanical design drawings and electrical/wiring diagrams and can provide improvement feedback to design teams. Enhanced knowledge and operation of oscilloscopes, HV probes, leak detectors, electrical testers; working knowledge of ESD mitigation is required. Clear and concise communication with operations crew and engineering team; ability to concisely document technical data and decisions. Desired Skills Pulsed-power familiarity, ability to solder and build cables Cleanliness/contamination control experience. Machining/rapid-fab familiarity; basic CAD or ECAD experience. Forklift/overhead crane, rigging, and safe lifting certs.

Control Electrician II, Albuquerque, NM Build your future at Curia, where our work has the power to save lives Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience partnering with pharmaceutical and biotech companies to provide life-saving treatments to patients. At Curia, we are on a mission to advance our customers' therapies from curiosity to cure and ultimately to improve patients' lives. We proudly offer * Generous benefit options (eligible first day of employment) * Paid training, vacation and holidays (vacation accrual begins on first day of employment) * Career advancement opportunities * Education reimbursement * 401K program with matching contributions * Learning platform * And more! Summary: The Control Electrician II is responsible for maintaining and supporting the electrical and control systems for all manufacturing equipment, utilities, and facilities to ensure the safe and efficient production of quality products. This position serves as the first responder to system failures, quickly determining whether issues stem from control systems or mechanical components. The Control Electrician II performs hands-on troubleshooting, repairs, installations, and preventive maintenance of electrical and control equipment, and plays a key role in diagnosing system malfunctions, accessing PLCs, and interpreting ladder logic diagrams to expedite resolution. Responsibilities include diagnosing three-phase motor and drive failures, maintaining documentation in accordance with cGMP and company standards, and ensuring all work is completed with a high level of quality and safety. The Control Electrician II also supports project-based work and collaborates closely with Engineering and Maintenance Management to uphold operational reliability across the facility. Essential Duties and Responsibilities: * Troubleshoot, repair, install, and modify electrical and control systems for production equipment, utilities, and facility infrastructure. * Respond immediately to system failures to determine root cause-whether electrical, control-related, or mechanical-and take appropriate corrective actions. * Diagnose and replace faulty three-phase motors, motor drives, and related components as needed. * Access and interpret PLC programs and ladder logic diagrams to identify control system faults and support troubleshooting efforts. * Perform preventive maintenance on equipment and systems to ensure operational reliability and minimize downtime. * Maintain accurate and up-to-date documentation, including maintenance logs, wiring diagrams, schematics, and controlled documentation in compliance with cGMP requirements. * Complete maintenance work orders and associated forms in a timely, clear, and compliant manner. * Follow all safety protocols and procedures outlined in equipment manuals and company policies. * Provide support for capital projects, equipment upgrades, and other engineering or maintenance initiatives as assigned. * Maintain a high standard of workmanship and contribute to overall equipment and facility performance through quality-focused maintenance practices. * Read/interpret SOPs to ensure compliance * Maintain up to date trainings * Other duties as assigned Education and/or Experience: * High School Diploma or GED * Minimum of seven (7) years related job experience in a manufacturing environment * Experience with industrial equipment, wiring diagrams, and circuit level troubleshooting * State Electrical License, preferred Supervisory Responsibilities: This role does not have supervisory responsibilities. Language Skills: Ability to read and interpret documents such as, but not limited to, safety instructions, standard operating procedures, policies, and manuals. Ability to write clearly and communicate effectively. Mathematical Skills: Ability to add, subtract, multiply and divide into all units of measure, using whole numbers, common fractions, decimals and percentages. Ability to draw and interpret bar graphs. Reasoning Ability: Ability to demonstrate understanding and effective application of written and oral instruction. Computer Skills: Skilled in Microsoft Word, Excel and Outlook. Ability to quickly adapt and learn new manufacturing software systems. Other Skills and Abilities: * Fosters a collaborative and positive work environment * Champions change * Promotes a safe and healthy work environment by actively identifying and addressing potential hazards, following established safety protocols, participating in safety training programs, and fostering a culture of awareness and responsibility among team members * Demonstrates strong attention to detail * Demonstrated knowledge of occupational hazards and safety precautions of the maintenance trades. * Meet deadlines and work within established schedules * Complete assignments by demonstrating initiative * Identify emergency situations and report to appropriate personnel * Establish and maintain effective working relationships with plant maintenance, engineering staff and other departments as needed * Work well independently or as a team * Must be able to safely operate light/heavy equipment as relates to the completion of tasks and duties * Experience in working with medium voltages, multi-phase motor controls and heating circuits along with vacuum, pressure, and temperature control circuits. * The understanding of sensor circuits such as thermocouple, RTD, humidity and proximity sensors is strongly desired along with the knowledge of industrial control circuits. Other Qualifications: * Must pass a background check * Must pass a drug screen * May be required to pass Occupational Health Screening * Must pass pre-employment assessment * Must be able to obtain and maintain gowning certification * May be required to obtain and maintain media qualification * May be required to wear a respirator Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The essential physical demands will vary for each Curia position. All positions may require regular or occasional lifting, pushing and pulling up to 10 pounds, frequently; up to 25 pounds occasionally; and up to 50 pounds infrequently. Additionally, all positions entail regular sitting, standing and reaching, with some roles requiring prolonged periods of time for each activity. Visual acuity, both close and distant, along with depth perception is necessary in each role, with or without corrective lenses. Please note that employees are prohibited from wearing contact lenses in work areas with exposure to cleaning agents. Hand and finger dexterity are integral to all positions, with specific activities varying from typing to manipulating maintenance tools or operating keypads, switches, and buttons. Occasional stooping, kneeling, twisting, crouching, crawling and balancing are also part of each position's physical requirements. Certain roles may involve climbing and working at elevated heights as well. Work Environment: The work environment characteristics, described below, are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The working environments will vary for each Curia position. The employee may be required to work in an office, manufacturing, or warehouse environment. The office environment is designed for comfort and productivity, with room temperature settings maintained for optimal working conditions. It is common to hear conversational noise in the background. The pharmaceutical manufacturing environment is sterile. Therefore, aseptic gowning is required. Personal protective equipment (nitrile gloves, clean room socks, face-shields, safety glasses, aprons, steel-toed shoes and powered air purifying respirators) is necessary, depending upon the task at hand. The employee may be exposed to wet and/or humid conditions, confined areas, and refrigerator or freezer temperatures when working in a sterile environment. The warehouse environment is typically set at a controlled temperature but the employee may be exposed to refrigerator or freezer temperatures when retrieving materials. Some positions may occasionally be exposed to moving mechanical parts, elevated heights, airborne particles, electrical activities and vibration. In addition, some positions may work with or be exposed to, compressed gases and must wear ear protection. All environments may be subject to working with or being exposed to cleaning agents. All environments may be subject to working with or being exposed to cleaning agents. Education, experience, location and tenure may be considered along with internal equity when job offers are extended. We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at Curia, in any form without a valid, signed search agreement by an authorized signatory in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Curia. No fee will be paid in the event the candidate is hired by Curia because of the unsolicited referral. All interested applicants must apply online. Please be aware of scammers. Curia will only send offer letters and requests for sensitive personal information from a curiaglobal.com email address. Curia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Curia is an E-Verify employer.

Control Electrician II, Albuquerque, NM Build your future at Curia, where our work has the power to save lives Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience partnering with pharmaceutical and biotech companies to provide life-saving treatments to patients. At Curia, we are on a mission to advance our customers' therapies from curiosity to cure and ultimately to improve patients' lives. We proudly offer Generous benefit options (eligible first day of employment) Paid training, vacation and holidays (vacation accrual begins on first day of employment) Career advancement opportunities Education reimbursement 401K program with matching contributions Learning platform And more! Summary: The Control Electrician II is responsible for maintaining and supporting the electrical and control systems for all manufacturing equipment, utilities, and facilities to ensure the safe and efficient production of quality products. This position serves as the first responder to system failures, quickly determining whether issues stem from control systems or mechanical components. The Control Electrician II performs hands-on troubleshooting, repairs, installations, and preventive maintenance of electrical and control equipment, and plays a key role in diagnosing system malfunctions, accessing PLCs, and interpreting ladder logic diagrams to expedite resolution. Responsibilities include diagnosing three-phase motor and drive failures, maintaining documentation in accordance with cGMP and company standards, and ensuring all work is completed with a high level of quality and safety. The Control Electrician II also supports project-based work and collaborates closely with Engineering and Maintenance Management to uphold operational reliability across the facility. Essential Duties and Responsibilities: Troubleshoot, repair, install, and modify electrical and control systems for production equipment, utilities, and facility infrastructure. Respond immediately to system failures to determine root cause-whether electrical, control-related, or mechanical-and take appropriate corrective actions. Diagnose and replace faulty three-phase motors, motor drives, and related components as needed. Access and interpret PLC programs and ladder logic diagrams to identify control system faults and support troubleshooting efforts. Perform preventive maintenance on equipment and systems to ensure operational reliability and minimize downtime. Maintain accurate and up-to-date documentation, including maintenance logs, wiring diagrams, schematics, and controlled documentation in compliance with cGMP requirements. Complete maintenance work orders and associated forms in a timely, clear, and compliant manner. Follow all safety protocols and procedures outlined in equipment manuals and company policies. Provide support for capital projects, equipment upgrades, and other engineering or maintenance initiatives as assigned. Maintain a high standard of workmanship and contribute to overall equipment and facility performance through quality-focused maintenance practices. Read/interpret SOPs to ensure compliance Maintain up to date trainings Other duties as assigned Education and/or Experience: High School Diploma or GED Minimum of seven (7) years related job experience in a manufacturing environment Experience with industrial equipment, wiring diagrams, and circuit level troubleshooting State Electrical License, preferred Supervisory Responsibilities: This role does not have supervisory responsibilities. Language Skills: Ability to read and interpret documents such as, but not limited to, safety instructions, standard operating procedures, policies, and manuals. Ability to write clearly and communicate effectively. Mathematical Skills: Ability to add, subtract, multiply and divide into all units of measure, using whole numbers, common fractions, decimals and percentages. Ability to draw and interpret bar graphs. Reasoning Ability: Ability to demonstrate understanding and effective application of written and oral instruction. Computer Skills: Skilled in Microsoft Word, Excel and Outlook. Ability to quickly adapt and learn new manufacturing software systems. Other Skills and Abilities: Fosters a collaborative and positive work environment Champions change Promotes a safe and healthy work environment by actively identifying and addressing potential hazards, following established safety protocols, participating in safety training programs, and fostering a culture of awareness and responsibility among team members Demonstrates strong attention to detail Demonstrated knowledge of occupational hazards and safety precautions of the maintenance trades. Meet deadlines and work within established schedules Complete assignments by demonstrating initiative Identify emergency situations and report to appropriate personnel Establish and maintain effective working relationships with plant maintenance, engineering staff and other departments as needed Work well independently or as a team Must be able to safely operate light/heavy equipment as relates to the completion of tasks and duties Experience in working with medium voltages, multi-phase motor controls and heating circuits along with vacuum, pressure, and temperature control circuits. The understanding of sensor circuits such as thermocouple, RTD, humidity and proximity sensors is strongly desired along with the knowledge of industrial control circuits. Other Qualifications: Must pass a background check Must pass a drug screen May be required to pass Occupational Health Screening Must pass pre-employment assessment Must be able to obtain and maintain gowning certification May be required to obtain and maintain media qualification May be required to wear a respirator Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The essential physical demands will vary for each Curia position. All positions may require regular or occasional lifting, pushing and pulling up to 10 pounds, frequently; up to 25 pounds occasionally; and up to 50 pounds infrequently. Additionally, all positions entail regular sitting, standing and reaching, with some roles requiring prolonged periods of time for each activity. Visual acuity, both close and distant, along with depth perception is necessary in each role, with or without corrective lenses. Please note that employees are prohibited from wearing contact lenses in work areas with exposure to cleaning agents. Hand and finger dexterity are integral to all positions, with specific activities varying from typing to manipulating maintenance tools or operating keypads, switches, and buttons. Occasional stooping, kneeling, twisting, crouching, crawling and balancing are also part of each position's physical requirements. Certain roles may involve climbing and working at elevated heights as well. Work Environment: The work environment characteristics, described below, are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The working environments will vary for each Curia position. The employee may be required to work in an office, manufacturing, or warehouse environment. The office environment is designed for comfort and productivity, with room temperature settings maintained for optimal working conditions. It is common to hear conversational noise in the background. The pharmaceutical manufacturing environment is sterile. Therefore, aseptic gowning is required. Personal protective equipment (nitrile gloves, clean room socks, face-shields, safety glasses, aprons, steel-toed shoes and powered air purifying respirators) is necessary, depending upon the task at hand. The employee may be exposed to wet and/or humid conditions, confined areas, and refrigerator or freezer temperatures when working in a sterile environment. The warehouse environment is typically set at a controlled temperature but the employee may be exposed to refrigerator or freezer temperatures when retrieving materials. Some positions may occasionally be exposed to moving mechanical parts, elevated heights, airborne particles, electrical activities and vibration. In addition, some positions may work with or be exposed to, compressed gases and must wear ear protection. All environments may be subject to working with or being exposed to cleaning agents. All environments may be subject to working with or being exposed to cleaning agents. Education, experience, location and tenure may be considered along with internal equity when job offers are extended. We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at Curia, in any form without a valid, signed search agreement by an authorized signatory in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Curia. No fee will be paid in the event the candidate is hired by Curia because of the unsolicited referral. All interested applicants must apply online. Please be aware of scammers. Curia will only send offer letters and requests for sensitive personal information from a curiaglobal.com email address. Curia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Curia is an E-Verify employer.

Primary Accountabilities: The Electrical Journeyman is responsible for installing, maintaining, and repairing electrical systems in commercial, industrial, and residential settings. They must ensure compliance with all relevant regulations and standards. Additionally, they may be required to assist in troubleshooting electrical issues and implementing solutions. Major Duties: Accomplishes electrical installation and maintenance objectives by performing tasks such as installing electrical wiring, fixtures, and equipment according to local and national electrical codes. Performs routine maintenance and repairs on electrical systems, including troubleshooting, and diagnosing issues. Has responsibility for upgrading existing electrical systems to meet current safety and efficiency standards. Follows all safety protocols and procedures to ensure a safe working environment. Identifies potential safety hazards and takes appropriate measures to mitigate risks. Interprets electrical blueprints, schematics, and technical drawings to plan and execute installations. Assists electricians as needed during installation and repair tasks. Coordinates with other tradespeople, contractors, and project managers to complete projects on time and within budget. Requires infrequent overnight travel. #LI-JF Requirements Required Qualifications: Must be able to effectively communicate with clients and team members Must have Journeyman certification Must have the minimum required tool set acquired within 90 days of employment. Must be willing and able to work in all seasons and conditions throughout the year and may be exposed to extreme conditions (hot or cold). Ability to lift up to 50 lbs. 5+ years' experience in construction or a related field is highly desired but must have solid working knowledge of commercial and residential electrical systems. Must be able to pass pre-employment tests (background and drug screen) Must be able to demonstrate attention to safety Must have effective time management skills Must be able to work effectively in a team environment Must have a valid driver's license with good driving records to be insurable. Must have reliable transportation. Must be willing to work extended and varied shifts as required. Must be able to climb stairs, lift. bend, kneel frequently and stand for long periods. Must be able to work in confined spaces, work with heights. Additional Duties: Additional duties and responsibilities may be added to this at any time. The job description does not state or imply that these are the only activities to be performed by the employee holding this position. Employees are required to follow any other job-related instructions and to perform any other job-related responsibilities as requested by their supervisor. Indian Preference Exercised: Prairie Band, LLC is subject to Title 22: Employment Code of the Prairie Band Potawatomi Nation. In accordance with Title 22, this position is designated as a TIER 2 position. Preference will be given to individuals to the extent required pursuant to Section 22-2-4(B). #PBFED

**Amentum** is seeking an **Industrial Maintenance Electrician IV** to join our operations & maintenance team. This position is responsible for providing an advanced level of expertise in responding to work orders, troubleshooting, servicing, and documenting the electrical and controls needs of equipment and systems related to HVAC units for CNC production equipment, conveyors, motors, lighting systems, control circuits, VFDs, PLCs, conveyors, cranes, and hoists. Must have the ability to maintain, improve, and participate in developing control systems, programming ladder logic / PLCs (Allen Bradley, Siemens, Wago, GE, MicroLogix, ControlLogix, PLC-5) and HMI. Works with controls and instrumentation such as thermocouples and transducers, as well as primary voltages up to and including 480v. Provides instruction, mentors and trains less skilled technicians as needed. Effectively communicates with the site management team and the customer to understand requirements, solve electrical problems, and provide solutions to manufacturing problems. The **Industrial Maintenance Electrician IV** must have the ability to identify and correct any safety-related issues and perform independent equipment evaluations to identify potential equipment failures. General Maintenance of equipment will also be required. **Responsibilities:** + Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required. + Diagnoses, troubleshoots, maintains, and repairs electrical equipment and control circuits from 24v up to and including 480V AC, electro-mechanical test devices, instrumentation devices, PLCs / ladder logic controllers, and variable frequency drives as necessary. + Calibrates instrumentation equipment and controls for optimum performance. + Procures parts from crib systems, OEM, or authorized vendors. + Identifies and documents cost savings. + Assures work conforms to NEC guidelines. + Utilizes the building automation system to track building conditions and the operation of facilities equipment. + Utilizes strong electrical and mechanical skills in order to complete assignments. + Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS). + Responds and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations, and industry standards. + Recommends measures to improve maintenance methods and equipment performance. + Analyzes and resolves work problems or assists workers in solving work problems. + Understands company policies and enforces safety regulations. + Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions. + Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work. + Maintains a strict schedule in order to be successful in the assignment yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer. + Other duties as assigned by Manager or Supervisor. **Minimum Requirements:** + High school diploma or demonstrated equivalent. + Five years of experience performing electrical maintenance in an industrial environment or demonstrated equivalent combination of education and experience. + Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher. + Electrical License **Preferred Qualifications:** + Associates degree in industrial technology or certificate from an industrial electrical course + Experience troubleshooting and repairing 480V 3 phase. + Experience troubleshooting and repairing electrical issues on cranes and hoists + Experience installing, troubleshooting, and repairing VFD's, Allen Bradley PLC's, Allen Bradley RS Logix Software. + Experience installing rigid conduit and EMT up to 3 inches + Working knowledge of NEC, sizing wire and transformers, calculating conduit fill. + Experience troubleshooting and replacing 3 phase motors up 60hp. + Experience with a CMMS or Maintenance Management System (i.e. Maximo, MP2, etc.) + NFPA-70E training preferred. **Physical Requirements:** + Some tasks will require repetitive wrist movement. + Some tasks will require the ability to walk extensively throughout facilities during a workday. + Requires the ability to climb extension ladders, roof ladder, stepladders, and stairs as needed during a workday. + Requires the flexibility to bend/stoop, squat, kneel, reach/stretch, and move in a 90-degree fashion during workday. + Requires the ability to differentiate colors pertaining to wire color-coding. + Requires ability to read and understand information contained in a variety of documents or displayed on a computer screen. + Requires the ability to communicate with others on the telephone and in one-on-one or group discussions, meetings and presentations. + Demonstrated fluency in computer use including the full Microsoft product line. + Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress. **Special Requirements:** + Wear steel toe safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed. + Cope with demands (stressors) that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained. + Must be willing to work overtime when required. **Other Attributes:** + Must be willing to work overtime when required. + May be required to work holidays and weekends. + Work schedules can change based on critical business needs. **Additional Information:** + Qualified applicants who are offered a position must pass a pre-employment substance abuse test. + This position may require a valid Driver's License. + This position does not include sponsorship for United States work authorization. + This position will require the ability to obtain a security access badge at our client's location. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

… The electrical foreman is a critical leadership role with a significant impact on the success of a project, ensuring that we maintain a high level of quality, safety and customer satisfaction. Foremen at Power Design not only have access to innovative technologies in the field - including fully-equipped iPads - they also travel to our 16,000-square-foot training facility for customized training courses at our headquarters in St. Petersburg, Florida. position details/responsibilities… Working closely with project superintendent and other trades, oversee the assigned scope, including the management of material and manpower. Accountable for enforcing and promoting high quality and safety standards. Utilize technology such as company-provided iPad and smartphone to ensure the job gets done on time and exceeds customer expectations. Supervise, mentor and motivate employees working on designated scope. here's what we're looking for… OSHA 30 certification preferred. Progressive electrical leaders who love using technology and want a clear career path Skilled field supervisor with at least five (5) years of experience managing a scope and running multimillion dollar projects for an electrical contractor. Must have an active journeyman or master electrician license. Proficient knowledge of the National Electrical Code (NEC), local codes and construction safety requirements. Must have at least basic computer and writing skills. Demonstrate and uphold all of Power Design's core values, which include integrity, accountability, teamwork, innovation and growth. some of our benefits… Power Design has national health and dental plans, and we also offer life insurance and short and long term disability plans. You'll receive paid vacations and holidays as well as national discount programs for everything from movie tickets to flowers, rental cars, phones and vehicles! We also offer a 401(k) retirement plan as well as incentive and recognition programs. Relocation opportunities may also be available!

Unirac is a national leader in the solar PV structural mounting industry. We enable our customers to power the world with clean, abundant energy by creating dependable, innovative mounting solutions. Unirac is a fast-paced work environment and is growing rapidly with many changes and new opportunities arising regularly. Company Culture High performing, ethical culture centered around an entrepreneurial spirit and challenging work. Summary The Maintenance Technician I is an entry-level role responsible for supporting basic facility, equipment, and grounds maintenance. This position requires strong mechanical aptitude, willingness to learn, and the ability to follow detailed work instructions under close supervision. The Technician I assists in routine preventive maintenance and repairs and plays a supporting role in scheduled and unscheduled maintenance activities. Key Responsibilities Maintenance & Repair Perform basic maintenance tasks on drill presses, chop saws, and other primary shop equipment. Assist in routine cleaning, inspections, and minor building repairs. Support higher-level technicians in troubleshooting and equipment repair. Follow safety procedures when using basic hand tools and shop equipment. Preventive Maintenance Execute assigned PM checklists for basic equipment with supervision. Document completed PM tasks accurately and report issues immediately. Facility Support Assist with movement of equipment, tools, or materials as needed. Support setup for departmental moves or company events. Administrative & Documentation Maintain cleanliness and organization of maintenance areas. Complete basic PM logs and work order entries. Safety & Compliance Follow all safety procedures, including LOTO when trained and certified. Identify and report safety hazards promptly. Skills & Competencies Strong mechanical aptitude and willingness to learn. Basic proficiency with hand and power tools. Understanding of metric and imperial sizing. Ability to take direction, follow procedures, and work safely. Good work ethic, reliability, and teamwork. Education & Experience High school diploma or GED required. Mechanical hobbyist or basic shop experience preferred. No prior professional maintenance experience required. Physical Requirements Ability to stand, lift, crouch, and work around tools and machinery. Ability to lift up to 50 lbs regularly. Benefits Competitive Compensation Package Alternative work schedules Affordable Healthcare Benefits Package (Medical, Dental, Vision, Disability & Life/AD&D insurance, 401K) In compliance with federal law, all persons hired will be required to work in the United States and to complete the required employment eligibility verification form upon hire.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Auto Maintenance Technician II Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Hourly base pay rate is $22.02 - $33.08/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description At Manheim (a Cox Automotive company), we're hiring an Auto Maintenance Tech II. Do you want to work with ethical leaders who genuinely care about you and your career path? If so, keep reading. Cox might be the place for you. We are looking for a mid-level vehicle technician who provides high-quality vehicle maintenance for our customers. This technician may work independently or in a team environment. Why work with us? * $1.5K Tool Bonus for our new auto techs. * Career growth through Cox Auto University training, opportunity for GED reimbursement, free ASE training/certification and more! * Once you're on board, earn referral bonuses. Amount varies based on job type. You'll earn at least $1K for each new eligible technician referral you provide. * 30+ days of paid vacation and company holidays per year (from day 1) for full-time employees because we know you need time to recharge. Up to 44 paid days off with more time on the job. * Great healthcare benefits from day 1. Multiple options are available for individuals and families. One employee only plan could be FREE, if you participate in our health screening program. * At Cox, we believe in being transparent - please click on this link (Cox Benefits Overview) to learn more about our awesome healthcare benefits. * 10 days of free child or senior care through your complimentary Care.com membership. * Generous 401(k) retirement plans with up to 8% company match. * Great coworkers who love being part of a team. * Employee discounts on hundreds of items, from cars to computers to continuing education. What You'll Do You'll get your hands dirty serving as a mid-level auto tech performing medium-duty work. Other responsibilities include: * Providing highly skilled maintenance and repairs for all vehicles. * Performing diagnostics which may include brake components, tires, suspension components, drivability and complete repairs. * Performing advanced diagnostics, which may include charging, starting, AC, OBDII, drivability, electrical systems and complete repairs. * Completing mechanical inspection including required measurements, which may include interior/exterior components, engine and drive line components, under hood inspection and document deficiencies. * Complying with applicable procedures and regulations regarding recyclables, fluids, tires and disposable trash. * May up fit new vehicles with necessary equipment. * Utilizing approved vendors to obtain parts. * May be required to perform OEM recalls. Who You Are You've laid your foundation of skills and want to continue learning and advancing. A born team player, you're continually inspired by your teammates (and you motivate them in return). You also have the following qualifications: Required: * 3+ years of vehicle service and repair experience. * Safe drivers needed; valid driver's license required. * The ability to drive standard, automatic and electric vehicles. Preferred * A high school diploma or GED. * Current ASE Certification: G1, A4, A5, A6, A7, A8 when required by leadership. YDGCOX Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Job Description A Maintenance Technician is responsible for keeping a facility operating and repairing any problems when they are discovered before they have a chance to worsen. A Maintenance Technician will usually be required to perform a wide range of repair tasks around a facility. Some other tasks a Maintenance Technician may be called upon to do include: Performing routine maintenance around the building such as fixing structural damage, for example, window, door or wall repair Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures Working on damaged electrical wiring when a shortage or severed wire occurs Maintaining the building HVAC equipment in order to keep climate control in the facility functioning properly Applying preventative measures to the building to reduce the risk of future problems, such as using a sealant on a flat roof Fixing potential safety hazards to avoid injuries Painting the building when old paint has become faded or chipped

We are seeking a self-motivated and detail-oriented individual to join our team as a Hotel Maintenance Technician. This role involves performing general maintenance and repair tasks to ensure the hotel is safe, clean, and functional for guests and staff. Compensation: $18 - $20 Essential Responsibilities: Address guest and staff maintenance concerns promptly. Perform routine inspections of equipment, lights, and common areas. Complete daily maintenance tasks, including minor plumbing, electrical work, painting, and furniture repairs. Walk the property and parking lot to check for maintenance needs and cleanliness. Assist with pool area maintenance and housekeeping deep cleaning tasks as needed. Monitor and update maintenance logs to ensure timely completion of repairs. Maintain positive communication with the front desk, housekeeping, and management teams. Follow company safety and security protocols. Qualifications: Minimum of 2 years of maintenance or related experience. Proficiency with hand and power tools. Strong problem-solving and time-management skills. Ability to work independently with minimal supervision. Clear and professional communication skills. Physical Requirements: Ability to stand, walk, bend, and lift over 50 pounds regularly. Comfortable working under high pressure or in emergencies.

Job Description Core Values & Expectations: . Demonstrate dependability by calling-in only when necessary, showing up on time, being prepared to start your shift, and doing your job as described below. Always be honest. Admit mistakes, learn from mistakes, and move forward. Demonstrate an ability to accept constructive criticism and guidance from supervisors. Be professional by showing politeness and courtesy to co-workers and guests under all circumstances. When you don't know information, how something works, unsure of policy or procedures, or are unclear; seek answers from your supervisor. Major Responsibilities/Activities: Touch up, repair and re-paint walls throughout the facility. Perform assistants to contractors of any projects and construction on new and existing areas throughout the casino. Minor repairs on all heating and air units. Responsible for the appearance of the outside walkways, portal areas and parking lots. Responsible for maintaining upkeep of millwork and other furnishings around the facility. Responsible for maintaining upkeep of all chairs and bar stools in the facility. Responsible for de-icing walkways and removal of snow from designated customer and employee areas. Uses the chain of command to address issues and concerns in a constructive manner. Exhibits positive co-worker relations and is a team player. Obtain and maintain most current information regarding applicable Tribal, State, Federal and Gaming policies, procedures, rules, and regulations. Perform other duties as assigned. Minimum Requirements: Preference is given to qualified Santa Ana Tribal Members. Basic knowledge of computer applications. High School diploma or GED. Must possess and maintain a valid State of NM driver's license. Strong verbal communication skills. Must be able to speak and understand English. A smartphone capable of running company applications and communication systems is required. If a smartphone is not provided by the company, a candidate or employee may be provided a smartphone of the company's choice, through a payroll deduction program. All employees are required to proficiently use a smartphone for company applications, email, and text. Must be able to obtain and maintain a Pueblo of Santa Ana Gaming and Regulatory Commission non-gaming license. Essential Mental Functions: Obtain and maintain most current information regarding applicable Tribal, State, Federal, and Gaming policies, procedures, rules and regulations. Must be a detail oriented, organized individual with the ability to multi-task. Proven ability to provide outstanding customer service Proven ability in working with outside vendors and contractors. Proven ability to handle conflict situations. Must have excellent problem-solving abilities. Must have strong analytical skills. Must be able to work in a fast-paced environment. Must be able to deal with stressful situations in a professional manner. Essential Physical Functions: While performing the duties of the position, the employee is frequently required to stand, walk, turn, use hands and fingers to handle and feel, reach with hands and arms, talk, and hear. Ability to use electronic equipment including computers, adding machines and calculators. Must be able to work various hours, including weekends and holidays. Must present self in a well-groomed, professional appearance. The employee must be able to lift to 50 pounds. Must be able to work at a fast pace. Must be able to handle stress effectively. Must be able to maneuver around the office and the facility as needed to collect and distribute all necessary materials and documents. Must be able to stand and walk for a long duration of time. Must be able to work in inclement weather. Physical ability to safely perform the essential job functions of the position. Equipment Used Smartphones, computers, laptop computers, and other traditional office equipment as required. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employee's duties are performed indoors in a climate controlled non-smoking environment and outdoors during various weather conditions.

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a skilled Electromechanical Technologist to join our team. In this role, you will play a crucial part in the design, implementation, and maintenance of data acquisition and control systems. Your expertise will help ensure the reliability and efficiency of our operations, contributing to the overall success of our projects. You will collaborate with cross-functional teams to identify and address technical challenges, fostering a culture of innovation and continuous improvement. On any given day, you may be called on to: * Provide designs, controls, and engineering support for data acquisition and control systems. * Conduct testing and oversight of existing data acquisition and control systems. * Maintain data acquisition and control systems software and hardware. * Implement software data analytics routines into programs for non-technical operators. * Assist with the implementation and commissioning of contractor-supplied software into current and future operations control and data acquisition systems. * Troubleshoot problems and implement workable solutions as required. Due to the nature of the role, this candidate must be able to work onsite. Salary Range $72,800 - $140,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * High school diploma or higher degree plus three (3) or more years of related experience * Experience in operating and set up of oscilloscopes and soldering and/or standard electrical engineering measurement and test equipment such as power meters/sensors, and signal/waveform generators * Able to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire * Current Certified LabView developer (LCD) accreditation from National Instruments * Electromagnetic Impulse troubleshooting skills, control circuit theory and design * Experience with network analyzers and spectrum analyzers * Demonstration of at least one LabView controls/data acquisition project (minimum of 100 vi s) from inception to completion to include final documentation. * Demonstrated experience creating, storing and retrieving software from repository systems (i.e. GitHub or Sub-Version). * Experimental RF systems experience (theory/troubleshooting/maintenance). * Strong technical writing skills and the ability to prepare effective documentation. * Ability to work on programs that require adherence to standards and requirements. * Excellent interpersonal and communication skills as well as personal initiative, responsiveness, attention to detail and organization skills to handle multiple tasks and deadlines. * Willingness to tackle problems in a highly collaborative environment. * Ability to meet challenging design requirements and deliver results while meeting timelines within cost, schedule, and performance. * Active DOE Q-Level security clearance. About Our Team The Above Ground Testing (AGT) Accelerator Operations (1332) department is responsible for the operation of the Saturn, HERMES III, and SPHINX pulsed power accelerators. The primary objective of the department is to provide an applied research environment for the study of radiation effects on materials and electronics. The three accelerators generate electrical pulses of up to 20 million Volts and up to 12 million Amperes with nanosecond duration in order to create extremely intense pulsed radiation environments for the study of radiation effects sciences. Department 1332 also conducts pulsed power research and development to: improve radiation source fidelity, increase the output and fluence, as well as to improve the overall reliability and reproducibility of the accelerators. These unique, world class facilities are an essential part of the NNSA s Stockpile Stewardship Program. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Essential Functions If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Position Information This Limited Term Employee (LTE) position is a temporary position for one year term, which may be renewed at Sandia's discretion up to a maximum of seven years. Individuals in LTE positions may bid on regular Sandia positions as internal candidates, and in some cases may be converted to regular career positions during their term if warranted by ongoing operational needs, continuing availability of funds, and satisfactory job performance. Apply for Job * Careers * Sign In * New User

Job Description We are a (rad hard) team of builders, breakers, and fixers - delivering pulsed-power systems to accelerate the world's transition to fusion. Customers span defense, energy, and aerospace; our pulsed-power platforms (e.g., TITAN, Z-STAR) support nuclear effects testing now and fusion plants tomorrow. About the Role You will be responsible for the assembly, wiring and plumbing on electromechanical systems. Systems include vacuum, power generation, pulse forming section and oil system. You must be able to read mechanical and electrical drawings to be able to assemble, field and troubleshoot these complex systems. Job Requirements Assemble racks, HV/LV harnesses, enclosures, panels, and motion/actuation subsystems. Install pumps, valves, seals, gauges; leak-check and maintain oil and vacuum systems. Mount sensors, route signal cabling, and bring up data acquisition system (DAS)-oscilloscopes, probes, DMMs, and troubleshoot connection issues. Read schematics and harness drawings; crimp/terminate to specification; label, route and document work. Run electrical checkouts, resolve system noise, troubleshoot high voltage (HV) systems, and restore electromechanical systems to operational status. Preventive/corrective maintenance, spares, calibration, and readiness of tools and materials. Responsible for calibration of oscilloscopes, power supplies, etc.- Execute HV/LOTO, ESD, rigging, and lift plans, proper use of PPE; maintain clear and concise safety records. Capture build notes, monitor/maintain electromechanical systems, and feed improvements back to engineering. Minimum Requirements 3-7+ years experience building and integrating complex electromechanical systems (emphasis in pulsed power). Mastery of hand tools and metrology; expertise in electrical wiring and safety. Experience working with high voltage/high current systems and precision timing of operations. Ability to read mechanical design drawings and electrical/wiring diagrams and can provide improvement feedback to design teams. Enhanced knowledge and operation of oscilloscopes, HV probes, leak detectors, electrical testers; working knowledge of ESD mitigation is required. Clear and concise communication with operations crew and engineering team; ability to concisely document technical data and decisions. Desired Skills Pulsed-power familiarity, ability to solder and build cables Cleanliness/contamination control experience. Machining/rapid-fab familiarity; basic CAD or ECAD experience. Forklift/overhead crane, rigging, and safe lifting certs.

Join Solar Works Energy, the largest residential solar installer in New Mexico is now in Colorado! We are looking for a licensed Journeyman Electrician to help us continue delivering top -tier solar energy solutions to our customers. This is your opportunity to work with a fast -growing company in the solar industry, providing stable employment and opportunities for advancement. What We Offer: Competitive pay of $35 -40/hour Full -time, stable employment with New Mexico's largest residential solar installer Opportunities for career growth in the rapidly expanding solar industry Positive and supportive work environment Paid training on solar installations and safety protocols Responsibilities: Install, maintain, and troubleshoot solar PV systems for residential and commercial projects Ensure all electrical systems comply with local and national electrical codes Collaborate with solar installation teams to complete projects efficiently and safely Diagnose and repair electrical issues related to solar systems Perform regular maintenance and inspections of solar power systems Work with customers to provide excellent service and answer technical questions Requirements Valid Journeyman Electrician License Proven experience in electrical installation, repair, and troubleshooting Knowledge of local and national electrical codes Ability to work independently and within a team Strong attention to detail and commitment to safety Prior experience with solar systems is a plus, but not required (training provided) BenefitsWhy Solar Works Energy? At Solar Works Energy, we are passionate about making a difference in our community by providing clean, renewable energy solutions. With our focus on teamwork, innovation, and excellence, we create an environment where our employees can thrive and grow in their careers. We also value work -life balance and a positive company culture, which is why we invest in our team's growth and well -being.

… The electrical foreman is a critical leadership role with a significant impact on the success of a project, ensuring that we maintain a high level of quality, safety and customer satisfaction. Foremen at Power Design not only have access to innovative technologies in the field - including fully-equipped iPads - they also travel to our 16,000-square-foot training facility for customized training courses at our headquarters in St. Petersburg, Florida. position details/responsibilities… Working closely with project superintendent and other trades, oversee the assigned scope, including the management of material and manpower. Accountable for enforcing and promoting high quality and safety standards. Utilize technology such as company-provided iPad and smartphone to ensure the job gets done on time and exceeds customer expectations. Supervise, mentor and motivate employees working on designated scope. here's what we're looking for… OSHA 30 certification preferred. Progressive electrical leaders who love using technology and want a clear career path Skilled field supervisor with at least five (5) years of experience managing a scope and running multimillion dollar projects for an electrical contractor. Must have an active journeyman or master electrician license. Proficient knowledge of the National Electrical Code (NEC), local codes and construction safety requirements. Must have at least basic computer and writing skills. Demonstrate and uphold all of Power Design's core values, which include integrity, accountability, teamwork, innovation and growth. At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Auto Maintenance Technician II Management Level Individual Contributor Flexible Work Option No remote option; must work at a specified Cox location Travel % No Work Shift Day Compensation Hourly base pay rate is $22.02 - $33.08/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description At Manheim (a Cox Automotive company), we're hiring an Auto Maintenance Tech II. Do you want to work with ethical leaders who genuinely care about you and your career path? If so, keep reading. Cox might be the place for you. We are looking for a mid-level vehicle technician who provides high-quality vehicle maintenance for our customers. This technician may work independently or in a team environment. Benefits You might be asking "what's in it for me?" Great question. Here's a taste of the benefits we offer: * Competitive pay with opportunities for sign-on bonuses if applicable. * $1.5K Tool Bonus for our new auto techs. * Career growth through Cox Auto University training, opportunity for GED reimbursement, free ASE training/certification and more! * Once you're on board, earn referral bonuses. Amount varies based on job type. You'll earn at least $1K for each new eligible technician referral you provide. * 30+ days of paid vacation and company holidays per year (from day 1) for full-time employees because we know you need time to recharge. Up to 44 paid days off with more time on the job. * Great healthcare benefits from day 1. Multiple options are available for individuals and families. One employee only plan could be FREE, if you participate in our health screening program. * At Cox, we believe in being transparent - please click on this link (Cox Benefits Overview) to learn more about our awesome healthcare benefits. * 10 days of free child or senior care through your complimentary Care.com membership. * Generous 401(k) retirement plans with up to 8% company match. * Great coworkers who love being part of a team. * Employee discounts on hundreds of items, from cars to computers to continuing education. What You'll Do You'll get your hands dirty serving as a mid-level auto tech performing medium-duty work. Other responsibilities include: * Providing highly skilled maintenance and repairs for all vehicles. * Performing diagnostics which may include brake components, tires, suspension components, drivability and complete repairs. * Performing advanced diagnostics, which may include charging, starting, AC, OBDII, drivability, electrical systems and complete repairs. * Completing mechanical inspection including required measurements, which may include interior/exterior components, engine and drive line components, under hood inspection and document deficiencies. * Complying with applicable procedures and regulations regarding recyclables, fluids, tires and disposable trash. * May up fit new vehicles with necessary equipment. * Utilizing approved vendors to obtain parts. * May be required to perform OEM recalls. Who You Are You've laid your foundation of skills and want to continue learning and advancing. A born team player, you're continually inspired by your teammates (and you motivate them in return). You also have the following qualifications: Required: * 3+ years of vehicle service and repair experience. * Safe drivers needed; valid driver's license required. * The ability to drive standard, automatic and electric vehicles. Preferred * A high school diploma or GED. * Current ASE Certification: G1, A4, A5, A6, A7, A8 when required by leadership. Hop in the driver's seat of your career and let's get going. Apply today! YDGCOX Drug Testing To be employed in this role, you'll need to clear a pre-employment drug test. Cox Automotive does not currently administer a pre-employment drug test for marijuana for this position. However, we are a drug-free workplace, so the possession, use or being under the influence of drugs illegal under federal or state law during work hours, on company property and/or in company vehicles is prohibited. Benefits Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.