Electrician technician jobs in Austin, TX - 707 jobs

Employment Type: Full-time / Permanent / Direct Hire Compensation: Up to $35/hour (equivalent to ~$72k annually, assuming no overtime) Schedule: 7:00 AM - 4:00 PM, Monday-Friday (some overtime available) Benefits: medical, dental, vision, LTD/STD, HSA/FSA, term life, and supplemental health insurances (e.g., Aflac) for all employees (and their families if needed) 6 weeks PTO 401(k) paid parental leave We're looking for a Electro Mechanical Technician to join our growing team in Cedar Park, Texas. This role is ideal for someone who thrives in a precision-driven, process-focused environment and enjoys hands-on electromechanical work. If you have experience assembling motors, stators, coils, or other high-reliability electrical/mechanical systems-and you take pride in meticulous workmanship-this could be an excellent fit. In this position, you'll perform detailed assembly, testing, and inspection of electric motor components used in next-generation power and motion systems. You'll work with stators, windings, insulation systems, wiring, and precision mechanical fixtures while following strict work instructions and quality standards. Candidates from aerospace, EV powertrain, electronics, semiconductor, circuit boards, and other high-precision manufacturing environments are strongly encouraged to apply. Requirements 3+ years of hands-on experience in electromechanical assembly, motor/coil winding, aerospace electronics, EV powertrain, semiconductor, PCB assembly, or other precision manufacturing environments. Experience performing mechanical and electrical assembly tasks such as crimping, wiring, soldering, torque tools, epoxy/potting, and use of precision fixtures. Experience with electrical testing, such as continuity, resistance, insulation checks, or hipot testing (training provided). Ability to read and follow engineering drawings, schematics, work instructions, and revision-controlled travelers/SOPs. Strong attention to detail and process discipline-must consistently follow standardized procedures without deviation. Ability to accurately record build and test data for traceability and quality assurance. Proven reliability, consistency, and strong work ethic due to the complexity and safety requirements of the products. High school diploma or equivalent. Successful completion of a background check and drug test is required. Nice-to-Haves Experience with motor, generator, actuator, or electric machine assembly. IPC-A-610 or IPC-WHMA-620 experience or certification. Experience in pilot-line or R&D environments supporting early-stage manufacturing. Familiarity with MES systems or digital travelers. Exposure to Lean/5S principles, ESD practices, or continuous improvement environments. Prior collaboration with engineering, quality, or test teams for build feedback and process refinement.

Join us for a day dedicated to connecting with hiring managers, learning more about MEGASYS at EMD Electronics, and exploring exciting career opportunities. This event offers a unique chance to interview for open positions while engaging with our team to understand our company culture and the innovative work we do. Don't miss this opportunity to advance your career and discover how you can contribute to the future of technology with MEGASYS at EMD Electronics in Austin, TX and Taylor, TX! In order to make an application, simply read through the following job description and make sure to attach relevant documents. Learn more about us here: Date: January 27th Time: 9:00 AM - 6:00 PM Date: January 28th Time: 8:00 AM - 2:00 PM Click here to view our open positions and apply before the event: After you register, a Talent Advisor will reach out to you personally to arrange a fun and engaging in-person interview during the event. xevrcyc Don't forget to bring a copy of your resume; it's your ticket to an exciting opportunity. We can't wait to connect with you!

Requirements Requirements & Essential Functions: Install, trouble shoot, and repair electrical systems, panels, outlets, conduit, and lighting Perform preventive maintenance and electrical upgrades across multiple buildings and venues Coordinate temporary power setups for large-scale events and race weekends. Read and interpret blueprints, electrical schematics, and site plans. Ensure compliance with NEC, local codes, and OSHA regulations Support emergency power systems and event response as needed. Maintain accurate records of work performed and materials used. Collaborate with other trades and contractors on projects and renovations. Knowledge, Skills, and Abilities: Valid Texas Apprentice Electrician License (required) Strong interpersonal skills; can effectively communicate and relate to all levels within and outside the organization; create and build positive and productive relationships. Drives the team and the organization for results in order to improve bottom line performance; able to make timely or planned decisions appropriate to the circumstances or situation. Ability to make tough decisions, gains input from others and moves decisions forward in the organization. Responds quickly and effectively to changing trends and circumstances; embraces change and welcomes fresh perspectives; learns from past mistakes and adjusts accordingly. Ability to manage appropriate steps to get projects completed; has strong abilities to organize people and processes; can create a plan for resourceful workflow. Can be trusted to act in a manner that is truthful and values direct, honest communication at all levels of the organization. Required Qualifications: Minimum 4-6 years of commercial/industrial electrical experience. Strong understanding of power distribution, low-voltage systems, and high-capacity load demands Ability to work independently or as part of a small team. Comfortable working outdoors in all weather conditions and on elevated platforms or lifts. Availability to work flexible hours, including nights, weekends, and holidays during events Strong communication, problem-solving, and time-management skills Valid driver's license and reliable transportation. Preferred Experience: Experience in sports venues, arenas, or event-based environments Familiarity with backup generators, lighting control systems, and kitchen equipment power needs Physical Demand & Work Environments: Ability to stand, sit, use of hands to handle, or feel, reach with hands and arms. Ability to lift and/ or move up to 25 pounds. Ability to squat, bend, twist, push/pull. Ability to stand/walk for long periods. Specific vision abilities required by this job include close vision and distance vision. Work in extreme environments outdoors throughout the year. The noise level in the work environment is usually moderate but can be loud during events. Salary commensurate with experience. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job. EQUAL EMPLOYMENT OPPORTUNITY: COTA strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law.

As an Apprentice Electrician 4, you'll advance your expertise in the electrical trade, building upon the knowledge and skills acquired during your previous years of apprenticeship. This role requires a thorough understanding and proficiency in various aspects of electrical installation, maintenance, and repair. You'll work closely with experienced electricians to refine your abilities and take on more complex tasks within commercial and industrial settings. Responsibilities * Accurately identify and organize all materials used in the electrical trade. * Proficiently plan and execute underground installations with precision, adhering to provided specifications. * Confidently perform all aspects of rough-in installations with minimal supervision, including proper use of all associated tools and equipment. * Demonstrate advanced skills in hand bending EMT, with proficiency shown in bending larger EMT and rigid conduit using mechanical and table benders. * Install panel interior and pull feeders with little to no supervision within one-line systems, including proper use of all associated tools and equipment. * Assist in the setting and assembly of SES (Service Entrance Section) and transformers as part of electrical system installations. * Contribute to branch power system installations, including disconnect and homerun installations, terminations, branch circuit pulling, and fuse and rejection clip applications with minimal supervision. * Provide comprehensive support to journeyman electricians with a wide range of tasks as needed. * Identify and interpret complex symbols, layouts, and scales on blueprints with precision, with the ability to manage a small scope. * Maintain a clean and safe work environment. * Follow all safety protocols and regulations. * Adhere to our internal tool policy and demonstrate a proactive willingness to invest in and maintain the necessary tools required for the trade. Qualifications * High school diploma or equivalent. * Minimum of three years of prior experience in commercial electrical installation. * Must hold a valid State of Texas TDLR card. * Previous enrollment in an accredited apprenticeship program is preferred. * Demonstrated ability to handle more complex tasks and responsibilities. * Increased willingness to take initiative and ownership of projects. * Proficiency in all materials used in the electrical trade. * Proficiency in underground and rough-in installations. * Advanced proficiency in hand bending EMT with comprehensive knowledge in mechanical and hydraulic bending techniques. * Strong willingness to learn and a positive attitude. * Excellent communication and interpersonal skills. * Ability to work independently or under the supervision of a journeyman electrician with a high level of efficiency and accuracy. * Knowledgeable in chapters 1 through 4 of the NEC, with the ability to navigate and apply code effectively. * Commitment to safety and quality. * Valid driver's license and reliable transportation. * Willingness to work flexible hours and overtime as needed. Physical Requirements * Demonstrated capability to execute a wide range of physical movements, encompassing bending, stooping, crawling, climbing, kneeling, balancing, pushing, pulling, and reaching overhead. * Proficiency in lifting objects exceeding 50 lbs, adeptly handling substantial electrical equipment and materials such as light fixtures, wires, conduits, junction boxes, motors, and related items. * Skilled in working at varying heights utilizing tools such as A-Frames, extension ladders, boom lifts, scaffolds, and aerial work platforms. * Competence in performing trenching and excavation tasks as required. * Keen visual acuity (normal or corrected) and ability to accurately discern and differentiate wire colors. * Strong capability to stand for extended durations, approximately 90% of the workday. * Adeptness in transporting materials between locations or across different levels. * Proficiency in handling tools above head level for various tasks. * Ability to work comfortably in confined spaces.

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform routine and preventive maintenance on electrical systems and equipment. Troubleshoot and repair electrical issues to minimize downtime. Install and upgrade electrical systems and components. Ensure compliance with safety standards and regulations. Collaborate with other maintenance team members to optimize plant operations. What Are We Looking For Strong knowledge of electrical systems and components. Ability to read and interpret electrical schematics and blueprints. Proficiency in using electrical testing and diagnostic tools. Excellent problem-solving skills and attention to detail. Effective communication and teamwork abilities. Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. Physical Demands Ability to lift and carry up to 50 pounds. Frequent standing, walking, bending, and reaching. Ability to work at heights and in confined spaces. Manual dexterity to handle tools and perform tasks requiring fine motor skills. What We Offer Starting Pay $28.00 per hour DOE 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled #HMSWJobs

at Commercial Kitchen Parts & Service The Shop & Tech Helper will maintain the day to day maintenance at the building locations and office. This position is to provide support and assistance on installs as well as day to day service calls. Essential Responsibilities & Accountabilities: Maintain the cleanliness of the shop area daily Ensure the upkeep and maintenance of the building, shop and office Maintains safe and clean working environment Receive and load equipment for delivery Make weekly runs to turn in scrap equipment and parts Provide maintenance and cleanliness of branch delivery truck Make ready and wash branch fleet/vans Parts Runner, occasionally will deliver parts to service technicians as needed Provide support and assistance on service installs (some evenings/weekends may be required) Must be able to travel out of town for numerous days at a time Any other duties as assigned Qualifications: Possess a valid Texas Driver's License Clean driving record and background check Ability to work with minimal or no supervision Set and prioritize responsibilities Handle a variety of work assignments Proficient in MS Office and other computer applications Strong organizational, time management and multi-tasking skills Education and/or Experience: High School or GED Equivalent Commercial Food Equipment Service Association a plus EPA Universal Certification a plus

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Safely and efficiently provides electrical line service to the city's utility clients. Assemble & disassemble hardware for overhead & underground installations in a de-energized environment with instruction from Journeyman Lineman. Provide ground support for lineman operating in aerial bucket, on pole, trenches or underground facility environment. Operate heavy machinery involved with digging, setting and tamping poles, pulling overhead and underground conductors, digging and backfilling trenches or other excavations and hurt man rescue by operating platform controls of aerial bucket. Applicants are encouraged to submit a resume. ESSENTIAL FUNCTIONS: Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills. This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required. The job description does not constitute an employment agreement and is subject to change at any time by the employer. Essential duties and responsibilities may include, but are not limited to, the following: Electric Apprentice Lineman: * Safely and efficiently provides electrical line service to the City's utility clients. * Assembles & disassembles hardware for overhead & underground installations in a de-energized environment with instruction from Journeyman Lineman. * Provides ground support for lineman operating in aerial bucket, on pole, trenches or underground facility environments. Cuts and clears brush at ground level. * Operates heavy machinery involved with digging, setting and tamping poles, pulling overhead and underground conductors, digging and backfilling trenches or other excavations and hurt-man rescue by operating platform controls of aerial bucket. * Participates in the Apprentice Lineman Training Program including after-hours studies. * Available to perform other line work as required. * Perform other duties as assigned. Electric Journeyman Lineman: * Safely and efficiently provides electrical line service to the City's utility clients. * Assembles & disassembles hardware for overhead & underground installations in an energized environment without requiring direct supervision from the Crew Leader. * Operates heavy machinery involved with digging, setting and tamping poles, pulling overhead and underground conductors, digging and backfilling trenches or other excavations and hurt-man rescue by operating platform controls of aerial bucket. * Performs daily line construction activities for both overhead and underground installations from aerial bucket and by pole. Including the assembly of transformers, switches, pad-mounted facilities, metering, street lighting, capacitors and circuit switching & protection installations. * Participates as a mentor for Apprentices in the Apprentice Lineman Training Program. * Cut and clear brush at ground level and along aerial lines. * Troubleshoots during power outages, and participates in Safety meetings, and external and internal training sessions. * Uses various electrician hand tools, i.e. snips, screwdrivers, pliers, wire cutters, etc. * Available to perform other line work at required. * Perform other duties as assigned. Incumbents may enter as an apprentice to perform job tasks under direct supervision and training. Must be willing to participate in a lineman program that will guide you from an apprentice level all the way through to a Journeyman level in approximately four (4) to five (5) years of work-study and on-the-job training to reach step levels up to the Journeyman status. Pay increments are directly tied to the step levels as you progress through the program. Contingent offer requires successful pre-employment screening to include drug screening, driver's license check, background, and physical exam. Certification(s) Licenses required: Valid Class "A" Texas driver's license. Certificate of Skills from the Cities Apprentice Line Technician program or accredited approved alternate. Documentation and demonstration of abilities must be presented and demonstrated to the program training administrator within six (6) month evaluation period. Physical Demands: Standing, sitting, walking, lifting, carrying, pushing, pulling, reaching, handling, fine dexterity, crouching, bending, vision, hearing, talking, use of foot controls. Temperature extremes from weather and engines; loud noise from engine and blown fuses; creosote burns; live electric lines; occasional dogs and insects; uneven terrains; exposure to poison oak, ivy and sumac; entry into confined spaces. Knowledge/Skills/Abilities: Ability to operate heavy equipment safely; ability to follow electrical safety procedures; ability to maintain Texas Class "A" CDL driver's license applicable to job responsibilities and good driving record. * Ability to demonstrate knowledge, skills and abilities consistent with the most current Apprentice Lineman Program. * Abilities consistent with the most current Apprentice Lineman Program. * Reading: Reads electrical hazard warnings on equipment. * Writing: documents own timekeeping records for approval. * Math: Calculates work hours for time, measures distance and depth, and for basic electrical theories. * Reasoning: Solves technical, safety, and construction problems related to work. * Advanced Theoretical Knowledge: Knowledge of electrical systems and safety Minimum Requirements Electric Apprentice Lineman: High school graduate, or its equivalent required, must be at least 18 years of age, and have zero (0) to six (6) months related experience; electrical groundman or lineman experience preferred or any equivalent combination of experience and certified training that provides the required knowledge, skills, and abilities. Apprentice Electric Lineman - Groundman must possess a valid Texas driver's license upon hiring and acquire a Class "A" CDL, learn and demonstrate the ability to climb poles, actively progress in the first 1000 hours of textbook instruction and first year of on-the-job skills training with the City of Georgetown's Line Technician Training Program within six (6) month evaluation period. Advancement to next level: Apprentice Electric Lineman - Groundman must satisfactorily complete the first 2000 hours of textbook training and one (1) year of on-the-job skills training as specified with the City of Georgetown's Line Technician Training Program to be verified by mentor and program administrator; be able to demonstrate duties and limitations of Apprentice Electric Lineman Grade C; and knowledgeable of the adopted Safety Handbook as it applies to the City of Georgetown Electric Lineman. In addition to the above Apprentice Electric Lineman, groundman advancing to the next level must also learn and demonstrate the ability to climb poles; perform hurt-man rescue by pole and bucket; proper use of personal protective gear; knowledge of equipment grounding; basic math calculations and be able to demonstrate to mentor and program administrator. Minimum Requirements Electric Journeyman Lineman: High school diploma or equivalent. Must be at least 18 years of age. Must be certified by the Department of Labor (DOL) as a Journeyman Lineman. If you are not a DOL Certified Journeyman Lineman, then you must receive a certificate of skills from the City's Apprentice Lineman Training Program or an accredited approved alternate. Journeyman Electric Lineman must have satisfactorily completed 8000 hours of textbook training and four (4) years of on-the-job skills training with the City of Georgetown's Line Technician Training Program to be verified by mentor and program administrator. Graduation from a utility lineman certificate program and/or a two (2) year associate of Applied Science program for utility lineman or electric power technology will aid in qualification at this level. The preferred candidate will have equivalent to or combination of experience listed that provides for the required knowledge, skills, and leadership abilities and must demonstrate abilities with training documentation to be qualified at this level. Hiring Range: Apprentice Lineman: $23.44 - $43.05, hourly depending on qualifications. Journeyman Lineman: $40.09 - $50.22, hourly depending on qualifications. #LoveWhereYouWork! Check out the benefits of working with us here. Regular-Full time If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

The Facilities Electrical Technician II performs general, advanced and professional grade high-and low-voltage electrical maintenance in company-owned commercial, industrial, and residential facilities. This position will install and repair various electrical systems and components, coordinate repairs with supervisors, other Facilities Electrical Technicians, or vendors. CORE RESPONSIBILITIES Wear the appropriate personal protective equipment (PPE) to include High Visibility clothing. Perform general electrical maintenance in buildings, grounds and facilities. Operate various maintenance equipment, including but not limited to: hand/power tools, aerial lifts, telehandlers, skid steers, forklifts and any associated equipment. Immediately report safety violations and correct unsafe acts or conditions. Comply with company safety policies and procedures, including using the lock-out/tag-out system before performing maintenance work. Perform monthly electrical inspections and maintain the required documentation. Diagnose problems and implement solutions. Work with other Facilities Electrical Technicians as assigned by supervisor. Assist with stocking, unloading and delivering supplies. Assist with maintaining property security. Document repair operations and time-tracking in accordance with company procedures. Maintain equipment and tools essential to accomplishing daily tasks. Perform general housekeeping and engineering-related duties. Other duties as assigned. REQUIRED SKILLS & QUALIFICATIONS High school diploma or its equivalent Electrical Journeyman License or one of the following: At least three years of commercial/industrial electrical field experience At least four years of residential electrical field experience Ability to identify problems and implement solutions Demonstrated familiarity with the principles and techniques with electrical and associated trades. Working knowledge of the operational characteristics of mechanical equipment and tools Demonstrated experience with electrical system components and control systems. Ability to communicate effectively in English Ability to follow written and verbal instructions in English PREFERRED SKILLS & QUALIFICATIONS Course work or other trades training Ability to operate a scissor lift, telehandler manlift, excavator, skid steer, welder and forklift REQUIRED LICENSES & CERTIFICATIONS Valid Class C driver's license Safe driving for the last three years

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Requirements Knowledge, Skills and Experience: Minimum Education (or substitute experience) required - high school diploma 3+ years oil & gas experience on a drilling rig preferred 3+ years electrical experience working with industrial equipment required Master Electrician License preferred Experience with servicing industrial refrigeration equipment and/or electrical systems preferred Working knowledge of the Office 365 Suite, computers, and smart phones Valid Driver's License, insurable according to company policy Able to work long hours and provide support during evenings and weekends Ability to report to the service yard Physical Requirements: Moderate manual labor will be performed for 10+ hour shifts Occasional heavy labor involved such as pulling heavy cables General flexibility to move around equipment required Fine fingering dexterity required

Job Description The Industrial Electrician is responsible for maintaining, troubleshooting, and installing electrical systems, equipment, and components to support safe and efficient operations at the cement manufacturing plant. The role focuses on ensuring electrical systems, from low to high voltage, are operating within safety standards and production demands. Key Responsibilities Electrical Maintenance & Repair: Perform routine and preventive electrical maintenance on industrial equipment, including motor controls, PLCs, gauges, transmitters, and automation systems. Troubleshooting: Diagnose and repair electrical faults across various systems, including power distribution, automation controls, and digital drives. Installation: Install and calibrate electrical components such as motors, drives, controls, and high-voltage systems (up to 4160 volts). Qualifications Motor Controls: Strong experience with installation, troubleshooting, and maintenance of motor controls. Electrical Gauges and Instruments: Experience in working with pressure and temperature transmitters. Programmable Logic Controllers (PLC) & Automation: Competence in troubleshooting and maintaining PLC systems and digital drives. High Voltage Experience: Familiarity with working on power distribution systems up to 4160 volts.

The Industrial Electrician provides electrical services and support for mud cooling equipment located at the service yard or at various drilling rig sites. Leads electrical aspect of new mud cooling unit builds. Performs troubleshooting and preventative maintenance on existing units. Utilizes experience and expertise to provide electrical recommendations and support for a wide variety of equipment. Some physical labor is required. To be successful in this position, the Service Technician - Electrician must communicate thoroughly and honestly with our team and our customers. Industrial Electrician experience required! Oil & Gas experience preferred. Essential Functions: Completes all required safety training and refresher safety training in a timely manner, utilizes proper PPE and follows all Drill Cool Systems, Customer and OSHA safety standards. Supports other service technicians in improving their electrical equipment proficiency. Takes on special projects for upgrading electrical components on company equipment. Maintains proficient, honest communication and documentation of field conditions and service events to Management. Requires extensive use of Outlook, Excel, Calendars, OneDrive and smart phones. Documentation includes but not limited to: Service Tickets, JSA's, Inspection Reports, Expense Reports, Time Cards, Job Pictures, and Mileage Sheets. Immediately notifies Management according to procedure regarding field conditions and service events, particularly when a problem arises. Performs electrical setup, maintenance and repair on both 120Vac and 480Vac systems. Troubleshoots electrical components, logs common issues and recommends solutions for reoccurring issues. Performs phase and motor rotation, and wires mud and HTF pumps. Understands and utilizes proper cable fitting devices and techniques. Supports basic wiring including cutting and stripping, wiring electrical plugs and receptacles, up to 200 amps. Maintains proper wire termination and labeling. Serves as company representative on drilling site and maintains professional, thorough communication with customers. Responds to service calls and services equipment on customer drilling rig sites. Conducts inspections of electrical, air system, water system, mud system, structural and inventory. Performs mechanical repair on company equipment, including various components such as mud pumps, air systems, water systems, and mud systems. May perform basic welding, cutting, and grinding for equipment builds and maintenance. Strives to operate and conduct customer service in light of company Mission and Values. Requirements Knowledge, Skills and Experience: Minimum Education (or substitute experience) required - high school diploma 3+ years oil & gas experience on a drilling rig preferred 3+ years electrical experience working with industrial equipment required Master Electrician License preferred Experience with servicing industrial refrigeration equipment and/or electrical systems preferred Working knowledge of the Office 365 Suite, computers, and smart phones Valid Driver's License, insurable according to company policy Able to work long hours and provide support during evenings and weekends Ability to report to the service yard Physical Requirements: Moderate manual labor will be performed for 10+ hour shifts Occasional heavy labor involved such as pulling heavy cables General flexibility to move around equipment required Fine fingering dexterity required

Job Description The Senior Industrial Electrician will support new and existing facilities related to the manufacture of energetic material as part of a multi-disciplinary team of engineers and technicians. KEY RESPONSIBILITIES Install, maintain, and repair industrial electrical systems and equipment, including 480V power systems. Troubleshoot and repair electrical machinery, PLCs, and variable frequency drives (VFDs). Read and interpret electrical, mechanical, and pneumatic schematics and blueprints. Perform preventive maintenance (PM) on electrical equipment and systems. Ensure all work is performed safely and in compliance with electrical codes and company safety procedures, such as lockout/tagout and the use of PPE. Manage parts inventory and documentation of maintenance activities. QUALIFICATIONS Licensed in the state of TX as an electrician. Proven experience as an industrial electrician, with a strong background in high-voltage systems (480V and up). Experience with explosion proof electrical systems, oil and gas, hazardous environments, etc. Knowledge of motor controls, PLCs, and VFDs. Ability to read and interpret schematics, blueprints, and technical drawings. Proficiency in using diagnostic tools and test equipment. Experience with both AC and DC systems is often beneficial. DESIRED ATTRIBUTES Strong electrical and mechanical skills. Ability to work independently and identify and correct safety issues. Commitment to safety and a positive attitude. Ability to work various shifts, including nights, weekends, and holidays as needed, depending on the role. A positive work ethic. General Requirements Must be a US Persons. Must be able to satisfy federal government requirements for access to government information; having dual citizenship may preclude you from meeting this requirement. Company X-Bow Launch Systems, Inc. (pronounced "Crossbow") is a U.S. defense technology and rocket propulsion company that has developed an innovative, low-cost method to manufacture solid rocket motors. Our propulsion technology, space launch, and modular boost platforms make us a unique and highly desirable aerospace supplier to the defense and national security industries. As an employee at X-Bow, you will be allowed to participate in a range of diverse activities to apply X-Bow's unique technologies and the flexibility to focus on areas that will further your individual professional interests and career path. In this position, you will be critical in helping us execute advanced technology projects and conduct space launch programs for the U.S. Department of Defense (DoD) and other government agencies. We are looking for a candidate who combines strong communication, organization, and management skills with broad interests and experience in the aerospace industry. As a key member of a small, dynamic, and highly skilled team, you will be expected to actively collaborate with others as well as work independently to accomplish assignments and responsibilities successfully. Creativity and methodical problem-solving are both required. Additionally, we are looking for someone energetic, flexible, and adaptable who is enthusiastic about being integral to a highly competent and successful team. ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, a lawful permanent resident of the U.S., a protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. General Disclosure X-Bow Launch Systems, Inc. is an Equal Opportunity Employer; employment with X-Bow Launch Systems, Inc. is based on merit, competence, and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Whatever you intersection of identities, you are welcome at X-Bow. Job Posted by ApplicantPro

We are currently looking for a full time Facilities Maintenance Technician. This position is responsible for the Facility Coordination and Maintenance of the Southside Processing Plant and all Southside Market and Barbeque restaurants. Under the direction of the Director of Facilities, the Maintenance Technician will be responsible for performing a wide range of vendor supervision, preventative maintenance, and repair tasks to maintain the good condition and functionality of the buildings, equipment, and grounds for the plant and all restaurants. The facilities department is based out of Elgin, TX, with regular travel to our five locations in Central Texas as projects require. This is a hands-on position which will require a high level of resourcefulness, good communication skills, and basic mechanical skills. This position will report directly to the Director of Facilities. Primary Functions: Primary Areas of Responsibility * Work in conjunction with the Director of Facilities to develop and implement a world class Facilities Preventive Maintenance program * Assist in setting standards and expectations for equipment up time * Support the Operations Team to allow them to always serve guests the highest quality food products * Manage work orders and projects through maintenance software * Perform and supervise basic preventative and on demand maintenance of mechanical systems to ensure they are consistent with health and safety standards * Performs and supervise basic preventative and on demand maintenance of electrical systems such as replacing light bulbs, sockets, clean and repair circuit breaker panels * Assist with the setup of ventilation, refrigeration and other systems and conduct repairs when advised * Assists with the maintenance of the heating and plumbing systems to ensure functionality * Inspect alarm systems and schedules repairs as needed * Perform regular preventive maintenance on machines, equipment, and plant facilities * Diagnose problems, replace, or repair parts, test and adjust as needed * Conduct general upkeep procedures such as landscaping and other tasks as assigned * Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties * Assist with maintenance logs and report on daily activities * Ensure health and safety policies are followed

Job Description A Team Home Services is looking for a Apprentice Electrician to join our team. The Apprentice Electrician will be based in and around Austin, Texas and is responsible for providing on-site client installation, repairs, and maintenance. The ideal candidate is prompt and reliable, has superior support skills and excellent communication. He/she will have a proven track record of client satisfaction and is motivated to provide superior service. Responsibilities: Support the client - Oversee all network services and perform tests on equipment and circuits. Troubleshoot issues and resolve any requests or concerns that come up in a timely manner. Perform tests to ensure systems are error-free. Maintain relationships with customers and follow company guidelines. Equipment and service - Troubleshoot each problem and guide customers on how to properly use equipment. Create reports of customer service calls. Make suggestions for equipment upgrades while maintaining the current inventory, including vans and trucks. Qualifications: High school diploma or GED (required) Clean driving record and valid drivers license (required) Pass a background and drug screening (required) OSHA 10 - Construction Certification (preferred) 1-2 years experience as a licensed Apprentice Electrician Ability to build strong relationships with the customer and display excellent communication skills Ability to manage your workflow in a timely and consistent manner Ability to lift to 55 pounds Problem-solving skills and mechanical aptitude Computer skills including Microsoft office Working knowledgeable about all safety requirements Provide 3 references Pay rate: $16/hr-$20/hr Benefits eligible after 90 day probationary period: Paid Holidays Paid Time Off Paid Birthdays Paid Sick Time Option to enroll in Medical, Dental, and Vision insurance Option to enroll in 401(k) plan A tid bit on us: We are a home service and remodeling company dedicated to providing the highest customer service. Our customers are located all around and just outside of Austin. Our services include outdoor living spaces, kitchen and bath remodel, roofing, solar, and electrical services. We are a locally owned family business, and with that said there will be plenty of room for growth and an amazing work-life balance. Powered by JazzHR qf Zx95rMrC

Maintain the needed maintenance in the Resort Rooms and surrounding areas. Responsibilities: Must have a willingness to accept the most effective role. Keeps equipment operational, systems and building ready for use by completing preventive maintenance schedules; maintaining maintenance records; following policies and procedures; completing repairs and installing replacement parts; reporting needed changes. Maintains building accessibility and appearance by picking up litter; removing ice and snow from walkways and parking lot; painting; mowing the lawns and cleaning surrounding landscape. Completes special requests by hauling files and boxes; moving furniture; setting up furnishings; preparing rooms for meetings; assembling public announcement and audio visual equipment; following manufacturer's operating and care guidelines; completing repairs and installing replacement parts. Maintains building interior by dusting and polishing furniture, equipment, mirrors and fixtures; cleaning counters, walls, ceiling and woodwork; sweeping, scrubbing, and waxing floors; vacuuming and shampooing furniture and carpeting; requesting products/supplies necessary for stocking restrooms and lunchrooms; removing recyclables. Maintains building climate by trouble-shooting heating, ventilation, and air conditioning equipment. Maintains lighting by installing light bulbs and ballasts; repairing electrical wiring and fixtures. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Other duties as assigned Qualifications: Qualifications: Must have experience in all of the following Electrical: 1 phase 110/220 volt; 3 phase -240/480 volt Pneumatics: solenoid valve (24 volt systems) Hydrolics: cylinders, valve switches Sewer lift pumps/motors Water heater repairs Pump repairs (i.e. seals, bushings, packings, & impellers) Sewer cleanout: knowledge and experience AC/Heat/Refrigeration knowledge and certification Plumbing: faucets, flush valves, copper, pvc galvanizing Commercial kitchen equipment repair Knowledge and experience with conveyors Bearing changes and repairs Required to maintain established performance levels. Physical Requirements: Climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, lifting, pushing, pulling, picking, pinching, grasping, feeling, talking, hearing and repetitive motion of the hands, wrists and/or fingers. Very heavy work. Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently, and/or in excess of 20 pounds of force constantly to move objects. Visual acuity to perform an activity such as: operates machines, such as lathes, drill presses, power saws, and mills where the seeing job is at or within arm's reach; performs mechanical or skilled trades, tasks of a non-repetitive nature, such as carpenter, technicians, service people, plumbers, painters, mechanics, etc. Exposure to environmental conditions such as rain, direct/indirect sun and heat for extended periods of time. Subject to both environmental conditions. Activities occur inside and outside. Subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. Subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. Subject to sufficient noise to cause the worker to shout in order to be heard above ambient noise level. Subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. Subject to atmospheric conditions that affect the respiratory system of the skin, such as fumes, odors, dust, mists, gases, or poor ventilation. Frequently in close quarters, costumes, crawl spaces, small enclosed rooms, small sewage and line pipes, and other areas that could cause claustrophobia. Functioning in narrow aisles or passageways. Exposure to multiple, high-stress situation at any given time and must maintain a high level of alertness. Must be able to drive a vehicle with no restrictions. #LI-ES1 #LI-ES1 By applying, you consent to your information being transmitted by College Recruiter to the Employer, as data controller, through the Employers data processor SonicJobs. See Cedar Fair - Charlotte Terms & Conditions at legal and Privacy Policy at privacy and SonicJobs Privacy Policy at us/privacy-policy and Terms of Use at us/terms-conditions RequiredPreferredJob Industries Other

Apprentice Electrician(Full-Time) Circuit of The Americas (COTA) is a 365-entertainment destination for world-class events located in Austin, TX. The sports and entertainment portfolio at COTA is unmatched in the country with Formula 1 US Grand Prix, NASCAR and MotoGP attracting global fans during championship races on the famed Circuit and Live Nation producing over 30 headline concerts every year at the Germania Insurance Amphitheater. Opening in 2026, COTA's amusement park is a 20-acre theme park featuring two first of their kind Roller Coasters and over three dozen rides. Job Description: An Apprentice Electrician is skilled in the areas of installation, maintenance, and repair of electrical systems across a variety of buildings and high-profile venues. The ideal candidate thrives in fast-changing environments, enjoys problem-solving, and delivers safe, high-quality work. Electrical work will be centered around events and complex facility operations. This is a full-time, on-site role at COTA that will consist of weekend work and a range of various working hours depending on the season. Requirements Requirements & Essential Functions: * Install, trouble shoot, and repair electrical systems, panels, outlets, conduit, and lighting * Perform preventive maintenance and electrical upgrades across multiple buildings and venues * Coordinate temporary power setups for large-scale events and race weekends. * Read and interpret blueprints, electrical schematics, and site plans. * Ensure compliance with NEC, local codes, and OSHA regulations * Support emergency power systems and event response as needed. * Maintain accurate records of work performed and materials used. * Collaborate with other trades and contractors on projects and renovations. Knowledge, Skills, and Abilities: * Valid Texas Apprentice Electrician License (required) * Strong interpersonal skills; can effectively communicate and relate to all levels within and outside the organization; create and build positive and productive relationships. * Drives the team and the organization for results in order to improve bottom line performance; able to make timely or planned decisions appropriate to the circumstances or situation. * Ability to make tough decisions, gains input from others and moves decisions forward in the organization. * Responds quickly and effectively to changing trends and circumstances; embraces change and welcomes fresh perspectives; learns from past mistakes and adjusts accordingly. * Ability to manage appropriate steps to get projects completed; has strong abilities to organize people and processes; can create a plan for resourceful workflow. * Can be trusted to act in a manner that is truthful and values direct, honest communication at all levels of the organization. Required Qualifications: * Minimum 4-6 years of commercial/industrial electrical experience. * Strong understanding of power distribution, low-voltage systems, and high-capacity load demands * Ability to work independently or as part of a small team. * Comfortable working outdoors in all weather conditions and on elevated platforms or lifts. * Availability to work flexible hours, including nights, weekends, and holidays during events * Strong communication, problem-solving, and time-management skills * Valid driver's license and reliable transportation. Preferred Experience: * Experience in sports venues, arenas, or event-based environments * Familiarity with backup generators, lighting control systems, and kitchen equipment power needs Physical Demand & Work Environments: * Ability to stand, sit, use of hands to handle, or feel, reach with hands and arms. * Ability to lift and/ or move up to 25 pounds. * Ability to squat, bend, twist, push/pull. * Ability to stand/walk for long periods. * Specific vision abilities required by this job include close vision and distance vision. * Work in extreme environments outdoors throughout the year. * The noise level in the work environment is usually moderate but can be loud during events. Salary commensurate with experience. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job. EQUAL EMPLOYMENT OPPORTUNITY: COTA strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law.

The Shop & Tech Helper will maintain the day to day maintenance at the building locations and office. This position is to provide support and assistance on installs as well as day to day service calls. Essential Responsibilities & Accountabilities: * Maintain the cleanliness of the shop area daily * Ensure the upkeep and maintenance of the building, shop and office * Maintains safe and clean working environment * Receive and load equipment for delivery * Make weekly runs to turn in scrap equipment and parts * Provide maintenance and cleanliness of branch delivery truck * Make ready and wash branch fleet/vans * Parts Runner, occasionally will deliver parts to service technicians as needed * Provide support and assistance on service installs (some evenings/weekends may be required) * Must be able to travel out of town for numerous days at a time * Any other duties as assigned Qualifications: * Possess a valid Texas Driver's License * Clean driving record and background check * Ability to work with minimal or no supervision * Set and prioritize responsibilities * Handle a variety of work assignments * Proficient in MS Office and other computer applications * Strong organizational, time management and multi-tasking skills Education and/or Experience: * High School or GED Equivalent * Commercial Food Equipment Service Association a plus * EPA Universal Certification a plus

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations. Responsibilities * Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions * Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality * Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions * Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards * Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations * Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations * Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness * Provide technical support and training to field technicians and end-users as needed Qualifications * Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred * Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry * Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems * Familiarity with autonomous systems, marine navigation, and control systems is preferred * Strong analytical and problem-solving skills with attention to detail * Experience working with the DoD or government contracts is a plus Benefits * Medical Insurance: Comprehensive health insurance plans covering a range of services * Saronic pays 100% of the premium for employees and 80% for dependents * Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care * Saronic pays 99% of the premium for employees and 80% for dependents * Time Off: Generous PTO and Holidays * Parental Leave: Paid maternity and paternity leave to support new parents * Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses * Retirement Plan: 401(k) plan * Stock Options: Equity options to give employees a stake in the company's success * Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage * Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands * Ability to perform physically demanding work for extended periods of time, up to 12 hours/day * Frequently and repetitively, lift, push and carry up to 20 lbs. * The ability to carry 20 lbs. up and down stairs * Ability to work outside for an extended period of time * Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes * Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain * Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day * Climb and maintain balance on ladders, platforms, or other high structures * Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing * Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time * Exposures to hazardous materials and ability to follow waste handling/disposal procedures * Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.