Electrician technician jobs in Edison, NJ - 954 jobs

Job ID 254628 Posted 12-Jan-2026 Service line Advisory Segment Role type Full-time Areas of Interest Engineering/Maintenance **About The Role:** As a CBRE Maintenance Technician, you will be responsible for maintaining small to medium-sized buildings, industrial systems, and equipment. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. The role is onsite at an office building in Somerset, NJ USA. Standard hours of 7am - 4pm, Mon - Fri. **What You'll Do:** + Undertake routine maintenance and servicing of mechanical, electrical, and other building systems. + Stock restrooms, perform minor plumbing and electrical repairs. + Ability to manage and communicate with external vendors when needed. + Conduct routine maintenance inspections, diagnose potential problems, and make repairs. + Support in the setup and alteration of building machinery and structures. + Review assigned work orders and partner with available systems to supervise completion. + Support energy management by ensuring all building systems are operating efficiently. + Inspect existing installations for compliance with building codes and safety laws and impacts team through defined duties, methods and tasks. + Deliver own output by following defined procedures and processes under close supervision and guidance. **What You'll Need:** _To perform this job successfully, an individual will need to perform each crucial duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions._ + High School Diploma or equivalent experience, GED, or trade school diploma with 1-2 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered. + Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more. + Capability to adhere to fundamental work routines and standards in the execution of work. + Communication skills to exchange straightforward information. + Must be able to speak and understand English proficiently. + Shown understanding of Microsoft Office products. Examples include Word, Excel, Outlook, etc. + Excellent attention to detail along with a curious mentality. **Why CBRE** When you join CBRE, you become part of the global leader in commercial real estate services and investment that helps businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact. Our collaborative culture is built on our shared values - respect, integrity, service and excellence - and we value the diverse perspectives, backgrounds and skillsets of our people. At CBRE, you have the opportunity to chart your own course and realize your potential. We welcome all applicants. **Our Values in Hiring** At CBRE, we are committed to fostering a culture where everyone feels they belong. We value diverse perspectives and experiences, and we welcome all applications. **Disclaimers** Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future. **Applicant AI Use Disclosure** We value human interaction to understand each candidate's unique experience, skills and aspirations. We do not use artificial intelligence (AI) tools to make hiring decisions, and we ask that candidates disclose any use of AI in the application and interview process. **About CBRE Group, Inc.** CBRE Group, Inc. (NYSE:CBRE), a Fortune 500 and S&P 500 company headquartered in Dallas, is the world's largest commercial real estate services and investment firm (based on 2024 revenue). The company has more than 140,000 employees (including Turner & Townsend employees) serving clients in more than 100 countries. CBRE serves clients through four business segments: Advisory (leasing, sales, debt origination, mortgage serving, valuations); Building Operations & Experience (facilities management, property management, flex space & experience); Project Management (program management, project management, cost consulting); Real Estate Investments (investment management, development). Please visit our website at ************* **Equal Pay Disclaimer** CBRE carefully considers multiple factors to determine compensation, including a candidate's education, training, and experience. The minimum base salary for the Maintenance Technician is $21.64/hour and the maximum base salary is $24.04/hour. The compensation that is offered to a successful candidate will depend on the candidate's skills, qualifications, and experience. **Equal Employment Opportunity:** CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran status, political belief, or any other basis protected by applicable law. **Candidate Accommodations:** CBRE values the differences of all current and prospective employees and recognizes how every employee contributes to our company's success. CBRE provides reasonable accommodations in job application procedures for individuals with disabilities. If you require assistance due to a disability in the application or recruitment process, please submit a request via email at recruitingaccommodations@cbre.com or via telephone at *************** (U.S.) and *************** (Canada). CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

Lakeside Manor is an assisted living facility in Staten Island, NY. With a commitment to quality care, Lakeside Manor serves its community through comprehensive health services and a compassionate team dedicated to resident well-being. Potential candidates can look forward to joining a reputable organization known for its exceptional standards in health care. Role Description This is a full-time, on-site role for a Maintenance Technician located in Staten Island, NY. The Maintenance Technician will be responsible for performing day-to-day maintenance tasks, troubleshooting equipment issues, conducting preventive maintenance, and repairing various types of equipment. The technician will ensure that all systems are functioning efficiently and safely, contributing to the smooth operation of the facility. Qualifications Skills in Equipment Maintenance and Industrial Maintenance Proficiency in Troubleshooting and Preventive Maintenance Experience in Maintenance & Repair Strong problem-solving abilities and attention to detail Excellent communication and teamwork skills Ability to work independently and manage multiple tasks General proficiency in skills to maintain an assisted living facility. Salary is $22-$35 an hour depending on qualifications and experience Employee contribution Medical insurance offered. PTO and sick time

** Hobart Service, an Illinois Tool Works Company, has been in business for over 125 years and is the trusted source for Commercial Food Equipment Service Solutions. We have over 1,700 associates nationwide who serve as valued partners to our customers. Our employees are dedicated to providing the best customer service, give back to the communities where they live and work, and demonstrate the ITW values of Integrity, Simplicity, Trust, Respect and Shared Risk. **Job Description** Are you mechanically and electrically inclined? Do you like providing customers with quality service solutions? Join our team and become a part of the leading nationwide provider of commercial food equipment service! + You will work with customers to electrically/mechanically troubleshoot, diagnose, repair, and maintain a variety of commercial food equipment to include cooking, food preparation, ware washers, weigh wrap, baking and refrigeration. + You will typically leave from home each morning and work with minimal direct supervision at customer sites. + You will meet or surpass weekly productivity and customer-oriented goals while maintaining a high level of customer service. **The pay rate will depend on the successful candidates qualifications and prior experience. The range is below: $32.40 - $43.80 per hour.** **Qualifications** **What you'll bring to the table:** + An accredited High School Diploma or GED and 4-6 years of similar electrical/mechanical experience + You must have a valid Driver's License and ability to drive multiple hours daily + You should be able to work Overtime and On-Call as required + You must be able to attend our industry leading training at our corporate headquarters in Troy, OH **Physical Demands & Work Environment** _The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions._ Physical Demands While performing the duties of this Job, the employee may: + Lift up to 75 lbs with or without assistance + Climb up to 10 ft with an A-frame ladder + Occasional roof access may be necessary through extension ladders or fixed ladders greater than 20 feet + Extensive walking 3-5 miles / day + Extensive driving 5-6 hours/day + Kneel, squat, bend, push/pull + Move in different positions to accomplish tasks in various environments including tight and confined spaces + Operate motor vehicles or heavy equipment + Operate machinery and/or power tools Working Conditions + Office facility and customer facilities (including commercial kitchens of various types of businesses) + Exposure to noise, heat, cold, slippery, wet dirty conditions may occur + Travel requirement up to 50% of time Hours of Work + Normal business hours with occasional/frequent/extended hours as needed + Flexibility with schedule to meet critical deadlines + Extended hours may include nights and/or weekends + Normal scheduled hours cover early mornings, evenings and/or weekends **Additional information** **Why work for us?** + Competitive pay + Great insurance options with low premiums + Paid vacation and holidays + 401K with company match + Extensive on-the-job, online, and classroom training + Service vehicle, uniforms, and safety equipment provided + Safety-conscious work environment Hobart Service is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. ITW and Hobart Service are committed to providing a healthy and safe environment for all employees. To demonstrate this commitment, Hobart Service is tobacco-free (including e-cigarettes) on campuses and within company vehicles and maintains a drug-free workplace. If you are a qualified individual with a disability and are unable or limited in your ability to use or access the online application system process due to your disability, please contact Human Resources at **************************** to request assistance. No other requests will be acknowledged. _ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential._ _As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship._ _All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws._ _\#ZR1_ **Compensation Information:** **The pay rate will depend on the successful candidates' qualifications and prior experience. The range is below: $32.40 - $43.80 per hour.** _ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential._ _As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship._ _All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws._

Reporting to the Maintenance Director, the Maintenance Mechanic is responsible for maintaining, repairing, and performing preventive maintenance on manufacturing equipment and facility systems. This role also supports equipment upgrades and facility-related projects to ensure safe, efficient, and reliable operations. Responsibilities Conduct daily preventive maintenance and routine inspections on all equipment, making necessary mechanical adjustments Disassemble, clean, and reassemble equipment to ensure optimal mechanical performance Monitor and maintain preventive maintenance inventory and supplies Diagnose mechanical issues by observing and listening to equipment during operation Repair or replace defective components using hand and power tools Complete, document, and track work orders and assigned project tasks Read, interpret, and follow equipment manuals and technical documentation Perform all work in compliance with FDA, OSHA, SQF, NJDOH, and other regulatory requirements Maintain a clean, organized, and safe work environment in accordance with company policies Properly use required safety equipment and personal protective gear at all times Qualifications Previous experience as a Maintenance Mechanic in a manufacturing or industrial environment, including equipment repair and preventive maintenance Working knowledge of compliance standards including FDA, OSHA, SQF, and NJDOH Bilingual Spanish/English skills preferred

At InterSolutions, Property Management Staffing is all we do! InterSolutions is a full-service recruiting agency specializing in the property management industry. At InterSolutions, we are dedicated to finding the best permanent fit for our customers, and the best job searching experience for our candidates to land their dream job! We are currently looking to fill a Direct Hire Commercial Maintenance Technician opportunity for a Class A retail and office commercial client in Princeton, NJ . If you're a service oriented Maintenance Technician who is well versed in HVAC, plumbing, electrical, and appliances, apply today! Essential Job Functions for Maintenance Technician: Troubleshoots all property systems, and perform repairs Completes all repairs and work orders as necessary in an office and retail setting Proficiency in electrical and plumbing repairs and troubleshooting Completes and logs all assigned work orders in a timely fashion Drives to individual residential homes to rectify all maintenance issues Provides excellent service to residents Knowledge Skills and Abilities for Maintenance Technician: High school diploma or equivalent HVAC certification preferred Minimum 4 years' experience General knowledge of all aspects of maintenance repair and service Ability to lift up to 60 pounds and climb ladders Valid Driver's License Ability to communicate effectively both in writing and verbally Ability to work day, weekend, and evening hours as required We believe in delivering the highest level of service to our clients and associates every day. If you would like to be a part of our team and meet the above requirements, apply today! EOE

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: Maintain the electrical in the building and facility equipment. Read and understand electrical schematics and blueprints Troubleshoot and wiring equipment Supervisor the Maintenance team Previous Experience: Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe Preferred Experience: Wiring electrical enclosures as per schematic given Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: Required: High School diploma Preferred: Electrical Technology or Engineering Degree Preferred: Electrical Certifications Company training will include Company's Quality Management System ISO 9001:2015 awareness Other Skills: An ability to work well under pressure Teamwork and problem-solving skills Good verbal and written communication skills Efficiency and organization Able to speak Spanish helpful

Job Description We are hiring immediately for a full time MAINTENANCE ELECTRICIAN position. Note: online applications accepted only. Schedule: Full time; Monday through Friday, hours may vary. Occasional Saturdays required. More details upon interview. Requirement: Certified Electrician with high voltage experience and familiarity with CMMS is required. Pay Range: $30.00 per hour to $43.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1470767. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: *************************** Skg Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM's clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. Essential Duties and Responsibilities: Provides quality customer service by providing one-on-one attention to detail. Responds to dispatch calls for machine repairs using company vehicle. Calls on existing customers to determine adequacy of service; listens to and resolves service complaints. Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area. Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities. Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair. Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability. Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment. Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational. Recommends appropriate sources of electrical power for new installations or renovation projects. Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc. Performs corrective maintenance in accordance with the work order system. Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner. Maintains clean and safe work environment; performs job safely. Exhibits professionalism with customers, fellow employees and others. Performs other duties as assigned. Qualifications: Valid Non-CDL Class C driver's license. Valid current state/local electrical license. Two years of trade school or related experience. Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation. Working knowledge of local, state and the National Electric Code (NEC). Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Senior Industrial Electrician Pay: $40.15 -42.36/hr Shift: M-F 7:30AM - 3:30 PM From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of “People Build Businesses” alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. Reporting directly to the Plant Engineer, the Senior Industrial Electrician is responsible for achieving a high level of reliability for plant equipment through performing tasks required to maintain equipment and minimize downtime. This individual will use their training and knowledge to perform equipment/process/system maintenance, troubleshoot equipment, make repairs and identify and implement opportunities for improvement. What you will be doing: Must be able to pass electrical skills and safety testing to become a qualified Category 2 worker. Must be capable of performing electrical work on systems up to 480 Volts. As the resident electronic and PLC resource, you will be responsible for: Establishing and maintaining accurate, current and secure documentation of printed logic, electronic files and supporting software. Maintenance, system set-up and selection of supporting hardware. Application evaluation of electronic systems and software. Facilitate electronic and PLC training within the department. Seek out and identify obsolete, unsupported or otherwise deficient systems. Research and identify solutions then report, prepare scope of work and cost estimates to resolve. Actively participate in process improvement, new installation and make ready related to electronic, PLC or mechanical projects. Will function as a maintenance technician as needed, responsible for PM duties, project work and scheduled or breakdown maintenance, when situation dictates. Work with the site Maintenance Planner concerning inventory management of related electronic spares. We'd love to hear from you if: You will need 3-5 years' experience within an industrial setting where your focus was heavily with electrical and PLCs You must have Strong electronic and PLC skills, proficient knowledge of AB applications. Proficient understanding of applicable software, program language and printed logic. Programming, capable of writing, re-writing and creating new operating programs. Understanding of current applications and systems, mechanical and electrical. Proficient computer skills, word processing and software understanding. At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options 401(k) retirement plan with company match Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

Our manufacturing site in Ridgefield, New Jersey, is an integral part of our sterile fill-finish manufacturing network. The site, bolstered by a dedicated team of Pharma Services colleagues, enables our customers to deliver life-changing medicines to patients around the world. The Ridgefield site exemplifies our commitment to quality, patient-safety and innovation in the pharmaceutical industry, making a significant impact on global health. Discover Impactful Work: As Maintenance Electrician you collaborate closely with the maintenance, engineering, and production teams to ensure electrical systems operate safely and efficiently to support production operation. You will be responsible for the installing, maintaining, troubleshooting, and repairing of electrical systems and equipment in a pharmaceutical manufacturing facility. Education High School diploma or GED equivalent. Basic Qualifications Three (or more) years of experience working in a maintenance capacity in a pharmaceutical or industrial manufacturing environment or other regulated environment. Must have a valid driver's license Preferred Qualifications 2+ years working with mechanical, electrical, automated packaging, and aseptic fill equipment, including syringe and high-speed vial filling systems. Strong knowledge of pumps, motors, gearboxes, drives, VFDs, servo motors, and Allen Bradley PLCs. Able to read electrical drawings, schematics, and P&IDs. Proficient in Microsoft Word, Excel, Outlook; familiar with Infor EAM CMMS, E-Beam, PLCs, and calibration processes. Aseptic gown qualified. Strong adherence to LOTO, PPE, confined space, work-at-height, and electrical safety protocols. Knowledge of OSHA, NEC, and local codes. Must be able to wear full safety gear. Must be able to work independently and collaboratively, clearly communicate issues and resolutions across shifts. This is a shift role with after-hours, weekend, and holiday call-in availability. Must be able to lift 50 lbs, climb stairs, and work safely on ladders using PPE. Benefits: We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation! Compensation and Benefits The hourly pay range estimated for this position based in New Jersey is $30.70-$46.04. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

* Perform preventive maintenance on facilities and infrastructure equipment including HVAC equipment, compressors, generators, chillers, dust collectors and other equipment per the preventive maintenance schedule. * Perform repairs and other unplanned maintenance to facilities and infrastructure equipment * Interface with external equipment service providers to coordinate and monitor work on facilities and infrastructure equipment. * Perform routine monthly HVAC filter changes per the preventative maintenance schedule * Follow good documentation practices to record maintenance and repair activities * Utilize company computerized maintenance management systems (CMMS) as required to perform, record and document maintenance and repair activities. * Report required repairs found during preventative maintenance checks to the Facilities and Infrastructure Manager to determine direction on schedule and plan for repairs. * Interface with contractors regarding mechanical and electrical work within facility. * Perform other related duties and assignments as required. * Participate in scheduled emergency on-call time service as required * Assist team with miscellaneous furniture relocation and/or projects to maintain both facilities Your Qualifications: * High school diploma or equivalent. * Minimum of 5 years direct experience in industrial maintenance and repair. * PLC, welding, hydraulic pneumatic certificates helpful. * Competencies in control wiring, PLC logic, pneumatic technologies, hydraulics, motor circuit diagnostics, facility utilities and welding principles. * Ability to troubleshoot mechanical and electrical problems using schematics and diagnostic equipment. * Ability to work independently with minimal supervision. Physical Demands: * Frequently completes machine/equipment repairs. Ability to lift up to 40lbs. Ability to stand, walk, bend, and kneel for extended periods of time. Frequently ascends/descends a ladder or mechanical lifts to service items when needed. Equipment & Machinery Used: * Hand and power tools as supplied by the Maintenance department. Electrical meters and test equipment. Other equipment and machinery as required. Benefits Offered * Medical plan * Prescription drug coverage * Dental plan * Retirement savings plan * Disability benefits * Flexible spending account * Voluntary benefits * Time off program * Wellness program Let's achieve our goal together. If you are looking for a job where you can contribute actively, develop personally and professionally and make a lasting difference then this is the right place for you. As an international family business with a long-term perspective, we know that it is our around 3600 employees that are the key to our success. Let's achieve our goal together: Making people smile. Ivoclar is committed to Equal Employment Opportunity and Affirmative Action and, as such, affirms in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, religion, color, national origin, citizenship, sex, age, veteran status, disability, genetic information, sexual orientation, gender identity or any other protected characteristic. Ivoclar will not discriminate against persons because of their disability and will make reasonable accommodations for known physical or mental limitations of qualified employees and applicants with disabilities. We will also make reasonable accommodations during the interview and selection process. Hourly Salary: $34 per hour

Ocean Coast Electric LLC New Jersey 401K, Medical, Dental, Vision Sponsored apprenticeship program Tuition assistance Full-Time Ocean Coast Electric is seeking responsible, dedicated, and reliable electricians of all levels to bring their talents, expertise, and opinions to our staff. About Ocean Coast Electric LLC: Ocean Coast Electric is one of the top 5 electrical contractors for commercial and industrial projects. We specialize in turnkey design build warehouses and office fit outs. Ocean Coast prides themselves on having a friendly, team oriented, and encouraging staff. There is exponential room for growth when you join our team! Responsibilities: - High Quality new installations of conduit, cable tray, wiring and equipment. - Efficient and safe service and repair of existing electrical equipment. - Neat appearance. - Good customer manner. - Able to work independently and with a team. - Priority on safety. - Managing with great leadership skills. Preferred: - OSHA 10. - Bucket truck experience. - Boom lift and scissor lift certifications. Qualifications: - Must have a minimum of 5 years practical electrical field experience - Knowledgeable of NEC codes and industry standards - Trained, skilled and resourceful - Able to use tools and equipment - Strong problem solving and critical thinking skills - Strong understanding of electrical installation means and methods - Valid drivers license - Team player - Excavator Job Type: Full-time Benefits: 401(k) Dental insurance Flexible spending account Health insurance Paid time off Tuition reimbursement Vision insurance Compensation Package: Hourly pay Overtime pay Schedule: 8 hour shift Monday to Friday Education: High school or equivalent (Preferred) Experience: Electrical Experience: 5 years (Required) License/Certification: Electrical License (Preferred) Driver's License (Required) Ability to Relocate: Burlington, NJ 08016: Relocate before starting work (Preferred) Work Location: In person

Job Description Qualifications: Start Time: 6:30 AM End Time: 3:00 PM Qualifications High school graduate orequivalent At least 3 years of relatedcommercial and industrial electrical maintenance experience Varied electrical andmechanical experience Proven understanding ofelectrical system components and theory Ability to read and understandmechanical, electrical, and equipment drawings Ideally, youll also have: Trade school or technicalprogram diploma Responsibilities: At , we empower communities tofocus on what matters most to them people. Through the delivery of ouroperations and maintenance services, youll make it simpler and more seamlessfor our manufacturing clients to continue to produce their critical productsand innovate for continued improvement. As an Electrician, youll joina team of multi-discipline technical experts, ensuring that our clients candeliver their products and services uninterrupted. Well give you the toolsto become an expert on the electrical systems that support our clientsoperations and keep their people safe. Youll grow your expertise to help yourteam succeed in the safe and time-critical operation, maintenance and repair ofmission-essential electrical equipment and components including low voltage andmedium voltage systems such as chillers, variable frequency drives (VFD),emergency generators, uninterrupted power supply (UPS), panel boards, branchpanels, motor control centers, and related facilities equipment. Youll contribute to thesuccess of our program with efficient preventive maintenance and effectivesolutions to complex challenges that may arise in our clients state of the artfacilities. Most importantly, youlltake actionto ensure the safety, healthand well-being of your team and our planet. Bring your innovative ideas,talent for multi-tasking, and sharp attention to detail to help our clientskeep America up and running. Working Conditions &Physical Requirements: Safety is a core value at . Weare committed to providing a safe and healthy workplace for all employees. Thisposition will spend a substantial amount of time performing safety sensitivelabor or services. The physical and environmentaldemands required to perform the essential duties of this position includestanding, walking, sitting, coordination, balance and agility demands, whichmay include the ability to stoop, kneel, squat, grasp, reach, performrepetitive hand movements. Additional demands may involve a specific level ofdexterity, grip strength, climbing and cardiorespiratory demands. The use ofappropriate safety equipment will be mandatory in these areas to preventhazardous contact. Comments/Special Instructions Electrician II work schedule Mondaythrough Friday 630 AM to 3 PM, will require to go on on call rotating scheduleonce trained.

Job DescriptionBenefits: Competitive salary Paid time off Training & development We are looking for a dependable Electrician/Mechanic to join our team. The work location will be throughout the 5 boroughs of NYC. Driving company work van(s) to and from work location(s) will be required. In this role, you will be responsible for the installation, repair, and maintenance of electrical systems in residential properties and commercial businesses. You will be required install or repair a wide range of equipment, including service equipment, panels, circuit breakers, switches, outlets, light fixtures, fans, wires, conduit and cables. As well as troubleshooting to identify and resolve electrical issues. If you're interested in becoming part of our fast growing team, please send us your resume detailing your relevant experience and qualifications. Duties and Responsibilities Installing, maintaining, repairing, and replacing electrical wiring, lighting, and other components of the electrical system in homes or commercial buildings, including switches, outlets and light fixtures. Installing electrical wiring and equipment in homes or businesses for power and lighting circuits. Installing and replacing main services including service switches, meter sockets, end boxes and circuit breaker panels. Installing electrical systems in remodeling and new construction projects, including temporary lighting and power, rough-in and trim-out. Pulling and terminating cables. Installing conduit and pulling wires. Working with GCs and others trades to plan electrical layouts for remodeling and new construction projects. Ensure that work is in compliance with NYC Electrical Code, National Electrical Codes (NEC) and Utility Requirements. Inspecting electrical systems to ensure they are safe and meet electrical codes and regulations. Use a variety of tools and equipment to complete projects, including hand and power tools such as drills, screwdrivers, linemens pliers etc. Installing low-voltage (LV) systems as required. e.g. LV lighting, doorbell/intercom wiring, boiler wiring etc. Installing home automation systems, such as those that control lighting, climate control, security systems, and entertainment systems. Read and interpret blueprints, technical diagrams, and schematics to determine the best course of action. Test electrical systems and components to identify issues. Troubleshoot electrical problems and make necessary repairs. Assist other electricians as needed. Assign duties and responsibilities to Electrician Helpers. Adhere to all safety standards and procedures. Maintain a clean and organized work area. Provide excellent customer service and build positive relationships with clients. Required Requirements and Qualifications High school diploma or equivalent. 6+ years experience or completion of an apprenticeship program. 5+ years experience and completion of an electrical trade school. Must be able to complete installations on your own, if required. Valid drivers license required. No exceptions. Driving company work van(s) to and from work location(s) will be required. Understanding of the National Electrical Code (NEC) and NYC Electrical Code required. Ability to read and interpret blueprints and technical diagrams. Strong problem-solving skills. Excellent customer service skills. A practical examination will be part of the interview process. Successful completion of the practical examination required before hire. Electrical knowledge: Need to have a strong understanding of electrical systems and how they work. Need to know how to read electrical schematics, understand electrical code and be able to identify electrical hazards. This knowledge is necessary to ensure the safety of the people you work with and the people living in the homes you work on. Communication skills: Verbal and written communication skills required. Electricians work with other professionals, such as architects, engineers and contractors. Communication skills will help you collaborate with these professionals, explain your work to homeowners and relay job conditions back to the office. Salary The current starting salary is $35.00 per hour. Salary range is $35.00 to $40.00. This rate is subject to change.

The Electrical Technician (Instruments and Controls) is responsible for performing the necessary testing, repairing, and preventative maintenance on hydraulic, pneumatic, electrical and electronic control systems and instrumentation along with ensuring safe and efficient steam plant operations. They will also handle projects involving the implementation of design changes, major maintenance activities, including fuel systems, chemical treatment systems, and auxiliary equipment systems. Required Education/Experience * Associate's Degree AAS in Electrical Technology or * High School Diploma/GED and 4 Years Equivalent Work Experience Preferred Education/Experience * Bachelor's Degree Electrical Engineering Licenses and Certifications * Driver's License Required Physical Demands * Ability to respond to system emergencies * Able to work in all weather conditions, i.e. excessive heat and/or cold * Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs * Ability to carry tools and materials when climbing ladders and scaffolds, and entering confined spaces * Ability to work in adverse conditions that include, noise, confined spaces, and high elevations * Ability to climb ladders and stairs * Ability to work on elevated platforms, scaffolds, catwalks, roofs, and/or other equipment * Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces) * Ability to work with, and in, the vicinity of high voltage and/or other high-energy systems * Ability to be approved to wear and use either a full or half-face respirator and self-contained breathing apparatus (SCBA), without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations * Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday * Ability to use hand tools and operate heavy machinery, i.e. jackhammers * Ability to travel to company locations to work on storm restoration and heat contingencies * Use hand-eye coordination to adjust controls on equipment * Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses * Work rotating shifts, including nights, midnights, weekends, and holidays * Work with equipment with a manufacturer weight rating of 350lbs * Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment * Use personal vehicle(s), and be able to transport, store, and secure company laptops and other job-related equipment in vehicle. Acknowledge that reimbursement for use of personal vehicle is available through the company mileage procedure Additional Physical Demands * The selected candidate will be assigned a System Emergency Assignment (i.e., an emergency response role) and will be expected to work non-business hours during emergencies, which may include nights, weekends, and holidays. * The selected candidate will be assigned a System Emergency Assignment (i.e., an emergency response role) and will be expected to work non-business hours during emergencies, which may include nights, weekends, and holidays. Core Responsibilities * Technicians will cultivate a working knowledge of industrial instrumentation, water treatment systems, high voltage switchgears, switchyard equipment operation and maintenance, as well as conduit installation practices. * Technicians are responsible for performing necessary testing, repairs, and preventative maintenance on various systems (i.e. hydraulic, pneumatic, electrical etc.) * Technicians handle projects involving implementation of design changes and major maintenance activities (including fuel systems, chemical treatment systems, and auxiliary equipment systems). * Technicians also use a variety of electrical and electronic test equipment. * Technicians are valuable team members and are expected to work well with others as well as independently at times.

Electricians troubleshoot and perform specialized maintenance on equipment including insulation, heating, ventilation, air conditioning, communication, lighting, door, propulsion, and automatic train control and air brake systems. Install, service and repair electrical panels, wiring, lighting, and fixtures as well as specialized electrical equipment and machinery. Replace defective air filters, solid-state control boards, Freon, relays and pressure switches in HVAC system. Locate defective motor components using proper test equipment (meters). Perform safety control tests on doors, Cab Signal System, and braking systems. Replace defective pressure switches and micros switches in air brake system. Maintain and repair any electrical components on gear pullers, presses, and crane motors. Remove defective parts by dismantling devices; using hoists, cranes, and hand and power tools. Maintain continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Comply with all safety policies, practices, and procedures following routine and all standards of performance. Maintain a safe working environment. Multiple locations and must be willing to work in Morrisville, PA This is a Unionized position. Pass NJ Transit's Electrician Aptitude Test Demonstrate knowledge of OHMS laws, instrumentation, digital circuits, communication, computers Demonstrate experience with control valves, transmitters, and PLC Understand high voltage systems, grounding systems, fuses, and transformer maintenance Troubleshoot and repair basic electrical tools such as multi-meter, voltage tester, etc. Read electrical circuit diagrams and electrical blueprints Successfully pass the pre-screening process including drug test, physical, and criminal, employer, and driving background checks. High School Diploma or GED Knowledge and Skills: Programming, PLCs, VFDs, industrial Ethernet, digital and 4-20ma controls along with a broad knowledge of industrial electrical systems and power distribution Installation, repair, and troubleshooting of commercial or industrial electrical wiring The military performing heavy-duty repair experience (airplanes, ships, steel mills, etc.) Trade school, electrical, diesel-mechanical maintenance, and/or technical experience Physical Requirements: Lift up to 70 pounds occasionally Stoop, bend, crawl, balance, climb, kneel Be exposed to equipment that intensifies the heat factor on an occasional basis Wear protective equipment such as hardhat, safety glasses, and safety-toe boots

Benefits/Perks Competitive Compensation Career Advancement Opportunities Job SummaryWe are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: Follow all safety rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Install new electrical systems and repair existing systems Provide bids for work orders Interact with customers, suppliers, and other professionals Qualifications: Journeyman Electrician License Previous experience as an Electrician is preferred Valid Driver's License Ability to stand for long periods and lift heavy objects Strong understanding of mathematical concepts and measurements Professional appearance and courteous personality Compensation: $30.00 - $40.00 per hour The average home or commercial building has many different kinds of systems running through it, all of them working together to provide comfort and convenience. Practically all of these systems have one thing in common: their reliance on the electrical system in order to function properly. Without a healthy electrical system, most of the other fixtures in the building wouldn't even work. That's why it's so important to make sure that your electrical system is properly maintained, whether in a residential or commercial setting. Anderson Electric Corp. has over 20 years of experience providing professional electrical services throughout Montclair, NJ. Call today to schedule an appointment with one of our licensed and fully-trained electricians. Remember, when you contract with us, you're getting electricians committed to a set of values we stand by: safety, dependability, and service.

Benefits: Dental insurance Health insurance Vision insurance Job Title: Maintenance Technician Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities Conducting and completing scheduled preventative maintenance to maintain equipment efficiency. Knowledge of Computer Maintenance Management Systems (SAP preferred). Disassemble and assemble equipment for new installation and repair existing equipment. Assist operators in mechanical and electrical capacities to ensure production lines remain operational. Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment. Knowledge of using human machine interfaces to ensure equipment is operating on center lines. Ability to convert production lines to produce various products of different sizes materials. Properly troubleshoot and maintain glue and adhesive systems on packaging equipment. Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches. Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry. Familiarity with boiler operations. Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.) Provide maintenance support required to sustain continuous production on the Food Service line. Lubricate all machinery with the proper lubricants. Change drive belts, timing belts, etc., on all machinery. When possible, identify problems before they result in a hazard or downtime situations. Maintain water towers and test water. Operate air compressor and change filters and oils. Change packing and gaskets in all pumps. Operate roof heaters and air conditioners. Identify and replace bearings and seals as required. Perform Other Duties as Assigned Qualifications High school diploma or GED preferred. Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired. Training in forklift and pallet jack operation helpful. Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful. Ability to work cooperatively with a team. Must have visual, auditory, physical and mental ability to operate equipment safely.

We are Reckitt Home to the world's best loved and trusted hygiene, health, and nutrition brands. Our purpose defines why we exist: to protect, heal and nurture in the relentless pursuit of a cleaner, healthier world. We are a global team united by this purpose. Join us in our fight to make access to the highest quality hygiene, wellness, and nourishment a right and not a privilege. Supply Our supply chain is the backbone of our business. It's how we get our trusted products to people all over the world, safely and efficiently. And it's our talented and passionate teams that make this happen. If you're looking for a career in supply chain, there's no better place to be than Reckitt. We offer a variety of exciting opportunities in all areas of the supply chain, from planning and procurement to manufacturing and logistics. You could join our Global Supply Planning team to develop and implement our global supply strategy, or work with our Procurement Centre of Excellence team to negotiate and manage our supplier relationships. Our Manufacturing Excellence team help us improve the efficiency, quality and safety of our manufacturing operations, and our Logistics Excellence team develop new and innovative ways to distribute our products to customers. About the role The Industrial/Maintenance Technician II is responsible for your area of production, ensuring smooth running and troubleshooting problems. But the role is about more than just efficiency. Our commitment to innovation runs through the whole business. We will look to you to spot and take every opportunity to improve quality, safety, and performance. Shift: Weekend- Friday, Sat, Sun 7:15pm-7:30am Your responsibilities * Lead and/or assist in the layout, installation, maintenance and repair of high-speed packaging, processing, and mixing equipment and associated piping and utility systems. * Subject matter expert (SME) with electrical systems and troubleshoot electrical and mechanical malfunctions. * Read and understand advanced mechanical, electrical drawings and blueprints. * Programmable Logic Controllers (PLC), Servo motors and Variable Frequency Drive (VFD) troubleshooting. Minor programming ability preferred. * Maintain required paperwork and document entry for regulations and equipment maintenance history. * Responsibilities assigned for emergency response plan (e.g., fires, searches, evacuations, first aid). * Operate small and powered hand tools, wood and metal working equipment, gas and electric welding equipment, multi-meters, computers. * Responsible for cleanliness and housekeeping of work area. * Maintain good safety practices. * Other duties as assigned. The experience we're looking for * Minimum 5+ years work experience in a manufacturing environment; High-speed packaging equipment preferred. * Associates and/or bachelor's degree in the mechanical and/or electrical disciplines preferred. * Electrical certification and NFPA 70E training preferred and available. * Knowledgeable of preventative maintenance (PM) techniques and can implement improvements from vendor or OEM manuals. * Programmable Logic Controllers (PLC) programming and troubleshooting experience. * Mechanical, electrical, or reliability maintenance background desired; Welding and machining a plus. * Application and facilitation of continuous improvement tools (e.g., TPM, 5S, FMEA). * Voluntary overtime opportunities (including weekend work) are common and sometimes required. What we offer With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way. We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy. Equality We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you. All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law. Nearest Major Market: New Jersey Job Segment: Nutrition, Housekeeping, Counseling, Healthcare

The Electrical Technician (Instruments and Controls) is responsible for performing the necessary testing, repairing, and preventative maintenance on hydraulic, pneumatic, electrical and electronic control systems and instrumentation along with ensuring safe and efficient steam plant operations. They will also handle projects involving the implementation of design changes, major maintenance activities, including fuel systems, chemical treatment systems, and auxiliary equipment systems. Required Education/Experience Associate's Degree AAS in Electrical Technology or High School Diploma/GED and 4 Years Equivalent Work Experience Preferred Education/Experience Bachelor's Degree Electrical Engineering Licenses and Certifications Driver's License Required Physical Demands Ability to respond to system emergencies Able to work in all weather conditions, i.e. excessive heat and/or cold Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs Ability to carry tools and materials when climbing ladders and scaffolds, and entering confined spaces Ability to work in adverse conditions that include, noise, confined spaces, and high elevations Ability to climb ladders and stairs Ability to work on elevated platforms, scaffolds, catwalks, roofs, and/or other equipment Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces) Ability to work with, and in, the vicinity of high voltage and/or other high-energy systems Ability to be approved to wear and use either a full or half-face respirator and self-contained breathing apparatus (SCBA), without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday Ability to use hand tools and operate heavy machinery, i.e. jackhammers Ability to travel to company locations to work on storm restoration and heat contingencies Use hand-eye coordination to adjust controls on equipment Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses Work rotating shifts, including nights, midnights, weekends, and holidays Work with equipment with a manufacturer weight rating of 350lbs Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment Use personal vehicle(s), and be able to transport, store, and secure company laptops and other job-related equipment in vehicle. Acknowledge that reimbursement for use of personal vehicle is available through the company mileage procedure Additional Physical Demands The selected candidate will be assigned a System Emergency Assignment (i.e., an emergency response role) and will be expected to work non-business hours during emergencies, which may include nights, weekends, and holidays. The selected candidate will be assigned a System Emergency Assignment (i.e., an emergency response role) and will be expected to work non-business hours during emergencies, which may include nights, weekends, and holidays. Core Responsibilities Technicians will cultivate a working knowledge of industrial instrumentation, water treatment systems, high voltage switchgears, switchyard equipment operation and maintenance, as well as conduit installation practices. Technicians are responsible for performing necessary testing, repairs, and preventative maintenance on various systems (i.e. hydraulic, pneumatic, electrical etc.) Technicians handle projects involving implementation of design changes and major maintenance activities (including fuel systems, chemical treatment systems, and auxiliary equipment systems). Technicians also use a variety of electrical and electronic test equipment. Technicians are valuable team members and are expected to work well with others as well as independently at times.