Electrician technician jobs in Elizabeth, NJ

We are looking for self-motivated and safety-conscious candidates who would like to join our production team in our South Plainfield location! As well as the daily bonus up to $10 per hour! New employees can earn $90K in total compensation when working at Canam Steel Corp for a 50-hour work week. This includes the base rate, overtime, retention and production bonuses. There are additional ways to earn including referral bonuses. Position is full-time with benefits! 1st Shift Schedule Monday - Friday 7:00 AM - 3:30 PM + OT including some weekends JOB SUMMARY: The Maintenance Technician III supports production operations by performing preventative electrical/mechanical maintenance, troubleshoots and repairs production equipment, and performs repairs and maintenance of facility. Completes preventive maintenance and general maintenance in proper working order while abiding by all specified rules and regulations. ESSENTIAL FUNCTIONS: Performing troubleshooting and repair on electrical/electronic, hydraulic, pneumatic mechanical systems. Analyzing, troubleshooting, and repairing equipment- overhead cranes, roll formers, press brakes and resistance welders. Assist with the service and repairing of more complex equipment. Complying with applicable regulations according to OSHA and the department's Safety program. Troubleshoot, maintain, and repair PLC programs. Provide scheduled and emergency repairs to production equipment during production shift. Install and maintain production/facility equipment. Maintain a clean and organized work area. Adhere to safety protocols. Perform other duties as assigned by supervisor. Regular, reliable, punctual and consistent attendance. Must be able to work regular and/or flexible hours or shifts, overtime, weekends as required. Location 14 Harmich Road, South Plainfield, New Jersey 07080, United States Anticipated Pay Range $35.00-$40.00/hour + Weekly Production Bonus + Overtime Pay Range Disclaimer Please note that the compensation details listed reflect salary only, and do not include bonus or profit-sharing. Our salary ranges are determined by role, level, and location. The range displayed on the job posting reflects the minimum and maximum target for new hire salaries for this position. The range may vary by location. Within the range, individual pay is determined by additional factors, including job related skills, experience, and relevant education or training. BENEFITS: In addition to base salary, this role will be eligible for participation in Canam Steel Corp (CSC)'s benefits programs, including medical, dental, vision, (plus additional voluntary benefits) and 401K (with employer match). REQUIREMENTS: High school diploma or equivalent. Technical school preferred. At least 3 years of mechanical and electrical maintenance experience. Able to read electrical schematics, and mechanical Drawings Able to perform electrical troubleshooting and have a knowledge of electrical controls. Must have the ability to troubleshoot mechanical, hydraulics, electrical panels and electric motors. Must have basic knowledge of lock out / tag out and PPE. Experience in operating, troubleshooting and repairing various types of production machinery in a manufacturing environment. Licensed electrician, preferred. PHYSICAL DEMANDS: Frequent communication with others to exchange information. Standing for most of the shift, walking, use hands and fingers to handle or feel objects, tools, or controls. Reach with hands and arms; stoop, kneel, crouch, or crawl. Frequent repetition of motions that may include the wrists, hands and/or fingers. Frequent moving about to accomplish tasks or moving from one worksite to another. Frequent lifting or moving objects up to 50 pounds in all directions. Constantly thinking and processing information. Constantly maintaining concentration and focus on tasks. WORK ENVIRONMENT: Manufacturing floor with machinery. Exposure to airborne particles, loud noises, and extreme heat and cold. Use of personal protection equipment is required. DISCLAIMER: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. CSC retains the right to change or assign other duties to this position.

Lakeside Manor is an assisted living facility in Staten Island, NY. With a commitment to quality care, Lakeside Manor serves its community through comprehensive health services and a compassionate team dedicated to resident well-being. Potential candidates can look forward to joining a reputable organization known for its exceptional standards in health care. Role Description This is a full-time, on-site role for a Maintenance Technician located in Staten Island, NY. The Maintenance Technician will be responsible for performing day-to-day maintenance tasks, troubleshooting equipment issues, conducting preventive maintenance, and repairing various types of equipment. The technician will ensure that all systems are functioning efficiently and safely, contributing to the smooth operation of the facility. Qualifications Skills in Equipment Maintenance and Industrial Maintenance Proficiency in Troubleshooting and Preventive Maintenance Experience in Maintenance & Repair Strong problem-solving abilities and attention to detail Excellent communication and teamwork skills Ability to work independently and manage multiple tasks General proficiency in skills to maintain an assisted living facility. Salary is $22-$35 an hour depending on qualifications and experience Employee contribution Medical insurance offered. PTO and sick time

This role involves performing preventive, predictive, and corrective maintenance on food processing and packaging equipment to ensure reliable and efficient production. The Maintenance Mechanic will troubleshoot mechanical, electrical, pneumatic, and hydraulic systems while supporting daily operations such as start-ups, changeovers, and breakdown recovery. Responsibilities include maintaining documentation, adhering to food safety standards, and assisting with equipment installations. The position requires close collaboration with production teams and maintaining a safe, clean work environment. Job Requirements: Conduct maintenance and troubleshooting on equipment including conveyors, mixers, ovens, pumps, fillers, and wrappers. Follow GMP, HACCP, SQF, and plant safety guidelines while completing work orders and logs in CMMS. Provide operational support including plant start-ups, shutdowns, and addressing equipment failures to reduce downtime. Job Qualifications: 2-5 years of industrial maintenance experience in manufacturing, preferably food processing, with strong mechanical aptitude. Experience with pneumatics, hydraulics, and basic electrical troubleshooting, plus ability to read blueprints and schematics. Ability to safely perform physical tasks and hold or obtain an NJ Black Seal Boiler Operator license.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta's Ground Support Equipment team. A GMT (Stationary) specializes in completing repairs and utilizes preventive maintenance on motors and controls, Programmable Logic Controllers (PLC), pneumatic systems, conveyor systems, and machine shop equipment. The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment. Summary of responsibilities: Locates sources of problems by observing mechanical devices in operation and repair with precision measuring and testing instruments. Determines changes in dimensional requirements of parts by inspecting used parts and using rulers, calipers, micrometers, and other measuring instruments. Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures. Maintains equipment, parts, and supplies inventories by checking stock to log inventory levels; anticipating need; placing and expediting orders; and verifying receipt. Prepares maintenance reports by collecting, analyzing, and summarizing information and trends. External Applicants Only - Ground Maintenance Technician (Stationary) hired to work at the JFK airport receive a $5,000 sign-on bonus. You will receive $2,500 after 90 days of employment and the remaining $2,500 after 180 days of employment. The minimum starting hourly rate for this position is $36.22 with the ability to increase your hourly rate within 6 months of your start date, based upon premiums offered. Examples include but are not limited to CIMM Certification, Shift differential, and Skill differential. Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Qualified candidates must also possess at least one of the following: Electrical/Relay knowledge: Understanding and proficiency in repairing 12 to 50 VAC/DC control circuits, 120 VAC single-phase electrical circuits and control circuits, 480 VAC 3-phase electrical systems. PLC Controls/Network: Proficiency and knowledge of repairing PLC and the associated computer network systems. Allen Bradly PLCS, SLC 500, SLC 5000 and Micro Logix systems. Industrial Maintenance/Conveyor Systems/Passenger Loading Bridges (PLB): Knowledge of system operations for PLB, system operation for conveyor systems and heavy equipment maintenance on hydraulics/electrical/mechanical on large industrial machinery. Industrial A/C refrigeration: Knowledge of high-pressure point-of-use pre-condition air systems, low-pressure glycol chiller systems, and repair and isolate system failures, as well as the related software for both high- and low-pressure control circuits systems. 400 Hz Generator/Inverter Ground Power: Strong understanding of electronic and electrical components and proficiency at identifying problems and repairing and rebuilding them. A background in 400 Hz, testing equipment as needed to perform repair/overhaul, and the ability to read electrical schematics and drawings are required. Familiarity with Jetpower II, Jetpower Plus, and CSI units. Experience operating passive and resistive load banks and working in an electronics environment. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta's recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta's recruitment team, you can contact ...@delta.com . Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) Consistently prioritizes safety and security of self, others, and personal data. Embrace diverse people, thinking, and styles. Possesses a high school diploma, GED, or high school equivalency. Is at least 18 years of age and has authorization to work in the United States. Must have a valid driver's license. Must be proficient in English. Ability to lift items weighing between 50 and 70 pounds. Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays. Completion of a two-year degree at a post-secondary technical school or have a minimum of three years of demonstrated ability. Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. What will give you a competitive edge (preferred qualifications) A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas. Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics. Strong communication while working as a team and coordinating repairs with other GMTs and outside vendors. Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations. Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values - Care, Integrity, Resilience and Servant Leadership - every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: Competitive salary, industry-leading profit sharing program, and performance incentives. 401(k) with generous company contributions up to 9%. New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 - March 31). In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period. LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program. 10 paid holidays per calendar year. Birthing parents are eligible for 12-weeks of paid maternity/parental leave. Non-birthing parents are eligible for 2-weeks of paid parental leave. Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits. Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages. Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health. Domestic and International space-available flight privileges for employees and eligible family members. Career development programs to achieve your long-term career goals. World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint. Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies. Recognition rewards and awards through the platform Unstoppable Together. Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

Connections Personnel located in Scotch Plains has a direct hire position for a skilled maintenance mechanic 1st shift. Would prefer a candidate that has 3+ years of experience as a mechanic, food manufacturing preferred but not required. Required Skills: Boiler Operation Experience. Strong problem-solving and multi-tasking abilities. Excellent communication, logical thinking and attention to detail. Ability to reach electrical, pneumatic, hydraulic and mechanical schematics. Experience with replacing motors, belts, bearings, pulleys, sprockets, chains, cylinders, etc. Proficiency in plumbing, wiring, welding and drilling. Must have Microsoft Office (Word, Excel, PowerPoint, Outlook and Teams) Job Description: Follow safety protocols and ensure maintenance work adheres to safety standards. Perform preventative maintenance to ensure machinery operates efficiently. Plan, prioritize, assign, supervise, review and participate in technical staff work. Troubleshoot, diagnose and inspect production machinery. Read and comply with work orders for service, modification or installation of machinery. Improve equipment condition and operational efficiency. Maintain a safe and clean work environment by following procedures and regulations. Collaborate effectively with team members. Manage procurement and inventory control of maintenance parts. Develop and maintain relationships with external service providers and suppliers. Hours: Monday, Wednesday, Thursday, Friday, and Saturday 7am to 4pm (Tuesday and Sun off/ including 1hour unpaid meal break) During probationary time training will be Monday thru Friday 8-5pm if possible. Payrate: $25/hour BENEFITS: Medical Dental Vision Sick Pay For immediate consideration please apply online at: https://connections.securedportals.com/apply/

Commercial Office Maintenance Technician Direct Hire; $23 p/hr Old Bridge, NJ 08857 Reports To: Property Manager Compensation: Mileage reimbursed at IRS rate; bonus eligible Benefits: Comprehensive Benefits Package offered; eligible for 401(k) plan Position Summary: We are seeking a reliable and skilled Commercial Office Maintenance Technician to support 2 commercial office buildings. This role is essential in ensuring the smooth operation of building systems and maintaining a professional, patient-friendly environment for medical and office tenants. Key Responsibilities: Work Order Response: Promptly respond to and complete maintenance work orders across the portfolio. General Maintenance & Repairs: Perform routine maintenance and minor repairs in areas such as: Electrical Plumbing HVAC (Major repairs will be handled by contracted vendors.) Vendor Oversight: Coordinate with third-party vendors for specialized repairs. Ensure: Work is completed to scope and quality standards Minimal disruption to patient flow and medical practices Safety and cleanliness are maintained during vendor work Site Assessments: Use personal vehicle to travel between properties. Assess and report on maintenance needs. Communication: Maintain ongoing correspondence with the Property Manager regarding: Work order status Vendor performance Building conditions and tenant concerns Requirements: Proven experience in commercial property maintenance (electrical, plumbing, HVAC) Strong organizational and communication skills Ability to work independently and manage multiple sites Reliable personal vehicle and valid driver's license Willingness to travel daily between properties (mileage reimbursed) Preferred Qualifications: Experience in medical office environments Familiarity with building automation systems (BAS) Basic knowledge of vendor management and contract oversight Additional Information: Mileage Reimbursement: Paid at the current IRS rate Bonuses: Performance-based bonus eligibility 401(k): Participation available

LAUREL CIRCLE has been committed to enhancing the quality of life for our amazing residents for over 30 years. We are located on a beautiful 28-acre campus in Bridgewater, NJ and recently underwent an $8 million revitalization. When you work at Laurel Circle, you have a front-row seat to the amazing life stories of the wisest people on earth. What's more, you are part of an extraordinary company - one that's investing in the future of senior living by investing in you. Now accepting applications for a hospitality focused Maintenance Tech to join our team. This position assists all maintenance personnel in the short term, preventative and emergency maintenance programs for the buildings, grounds and equipment at the campus. Responsibilities will include the completion of all assigned work orders and maintenance projects under the supervision of the Director of Facility Services. Must be available to work Monday-Friday from 9:00-5:30. You will enjoy: Medical, dental, and vision insurance 401(k) with company match Generous PTO and PTO cashout program Emergency loans Chime MyPay at Work pay advance Elevate Education Reimbursement An exceptional work environment that is both engaging and fun Here are a few of the daily responsibilities of a Maintenance Tech: Plumbing & Electrical Troubleshoot and repair leaks, clogs, and water pressure issues. Replace and install toilets, faucets, and plumbing hardware. Swap out outlets, switches, light fixtures, and perform basic electrical diagnostics. Carpentry & Appliance Work Repair or replace cabinets, doors, locks, and drywall. Install and remove appliances like dishwashers, ovens, and washer/dryer units. Maintain door hardware and ensure secure, functional entryways. General Maintenance & Facility Support Use technology to manage and complete digital work orders. Mount TVs, grab bars, and other fixtures with precision. Assist with basic tech setups (e.g., connecting smart devices to Wi-Fi). Prepare units for new residents with inspections, minor repairs, and coordination. Keep tools and parts inventory organized and stocked. Here are a few of the qualifications we need you to have: Solid experience in general maintenance, especially plumbing, electrical, and carpentry. Strong problem-solving skills and mechanical aptitude. Ability to work independently and prioritize tasks effectively. Experience in healthcare or residential facilities is highly preferred. Physically able to lift, bend, and stand for extended periods. High school diploma or GED required, technical certifications a plus. Valid driver's license preferred. If you're an enthusiastic, compassionate, senior care professional who is passionate about hospitality and senior engagement- please apply, we'd love to get to know you! EEO Employer #SLC2 #TA2

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: Maintain the electrical in the building and facility equipment. Read and understand electrical schematics and blueprints Troubleshoot and wiring equipment Supervisor the Maintenance team Previous Experience: Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe Preferred Experience: Wiring electrical enclosures as per schematic given Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: Required: High School diploma Preferred: Electrical Technology or Engineering Degree Preferred: Electrical Certifications Company training will include Company's Quality Management System ISO 9001:2015 awareness Other Skills: An ability to work well under pressure Teamwork and problem-solving skills Good verbal and written communication skills Efficiency and organization Able to speak Spanish helpful

Senior Industrial Electrician Pay: $40.15 -42.36/hr Shift: M-F 7:30AM - 3:30 PM From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of "People Build Businesses" alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. Reporting directly to the Plant Engineer, the Senior Industrial Electrician is responsible for achieving a high level of reliability for plant equipment through performing tasks required to maintain equipment and minimize downtime. This individual will use their training and knowledge to perform equipment/process/system maintenance, troubleshoot equipment, make repairs and identify and implement opportunities for improvement. What you will be doing: * Must be able to pass electrical skills and safety testing to become a qualified Category 2 worker. Must be capable of performing electrical work on systems up to 480 Volts. * As the resident electronic and PLC resource, you will be responsible for: Establishing and maintaining accurate, current and secure documentation of printed logic, electronic files and supporting software. * Maintenance, system set-up and selection of supporting hardware. * Application evaluation of electronic systems and software. * Facilitate electronic and PLC training within the department. * Seek out and identify obsolete, unsupported or otherwise deficient systems. Research and identify solutions then report, prepare scope of work and cost estimates to resolve. * Actively participate in process improvement, new installation and make ready related to electronic, PLC or mechanical projects. * Will function as a maintenance technician as needed, responsible for PM duties, project work and scheduled or breakdown maintenance, when situation dictates. * Work with the site Maintenance Planner concerning inventory management of related electronic spares. We'd love to hear from you if: * You will need 3-5 years' experience within an industrial setting where your focus was heavily with electrical and PLCs * You must have Strong electronic and PLC skills, proficient knowledge of AB applications. * Proficient understanding of applicable software, program language and printed logic. * Programming, capable of writing, re-writing and creating new operating programs. * Understanding of current applications and systems, mechanical and electrical. * Proficient computer skills, word processing and software understanding. At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits * Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options * 401(k) retirement plan with company match * Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services * Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family * Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance * Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

To thrive in this role, you must have an impeccable safety record, and you must be reliable and show initiative. You show up every day eager to dive in and address issues you see, without being told. You are responsible for keeping the line moving safely and you take a lot of pride in that. Here's what you can expect on a typical day as a Maintenance Electrician on our team at Mauser Packaging Solutions: Safety: Safety is our number one priority. You'll learn our plant safety guidelines and pass all required safety training including lockout/tagout, arc flash, forklift certification, housekeeping, and 5S standards. Quality: We take pride in our output, and you take pride in ensuring our equipment is running smoothly and safely. High-Speed, Loud Environment: We manufacture plastic pails through injection and blow molding machining. It's fast and can be loud. Some areas of the plant get very warm in the summer. Hard work: Each day you'll be bending, lifting, stooping, and like to repair equipment. You will replace sensors, contacts, or other defective parts. You'll work with PLC equipment, multiple small tools, and high-voltage equipment. You are responsible for keeping your equipment in safe, usable condition and your area safe and tidy at all times. Supportive Team: Everybody plays an integral part in this work-family as we strive to reach all our goals and deliver an excellent product. Excellent Benefits: We offer an excellent benefits package including a retirement plan. We know you work hard, and we want to take care of you and your family. Requirements: High school diploma or equivalent required Read and understand pneumatic, hydraulic, electric and electronic documentation and drawings and interpret equipment data Experience and demonstrated knowledge of troubleshooting skills, preferably in PLC motor controls and electrical equipment Perform PLC programming & diagnostics on various systems and troubleshoot electrical equipment such as relays, contactors, overloads, timers, photodetection & proximity switches or light curtains Strong understanding of Allen Bradley Control Systems, RS Logic 5000 & Seimens S7 preferred Experience with Fanuc and Toshiba a plus Strong problem-solving skills Computer skills in Microsoft Word, Excel, PowerPoint and Outlook a plus Good verbal and written communication skills Good mathematical and organizational skills Good interpersonal skills Must be able to work multiple shifts and or overtime

Job Description Qualifications: Start Time: 6:30 AM End Time: 3:00 PM Qualifications High school graduate orequivalent At least 3 years of relatedcommercial and industrial electrical maintenance experience Varied electrical andmechanical experience Proven understanding ofelectrical system components and theory Ability to read and understandmechanical, electrical, and equipment drawings Ideally, youll also have: Trade school or technicalprogram diploma Responsibilities: At , we empower communities tofocus on what matters most to them people. Through the delivery of ouroperations and maintenance services, youll make it simpler and more seamlessfor our manufacturing clients to continue to produce their critical productsand innovate for continued improvement. As an Electrician, youll joina team of multi-discipline technical experts, ensuring that our clients candeliver their products and services uninterrupted. Well give you the toolsto become an expert on the electrical systems that support our clientsoperations and keep their people safe. Youll grow your expertise to help yourteam succeed in the safe and time-critical operation, maintenance and repair ofmission-essential electrical equipment and components including low voltage andmedium voltage systems such as chillers, variable frequency drives (VFD),emergency generators, uninterrupted power supply (UPS), panel boards, branchpanels, motor control centers, and related facilities equipment. Youll contribute to thesuccess of our program with efficient preventive maintenance and effectivesolutions to complex challenges that may arise in our clients state of the artfacilities. Most importantly, youlltake actionto ensure the safety, healthand well-being of your team and our planet. Bring your innovative ideas,talent for multi-tasking, and sharp attention to detail to help our clientskeep America up and running. Working Conditions &Physical Requirements: Safety is a core value at . Weare committed to providing a safe and healthy workplace for all employees. Thisposition will spend a substantial amount of time performing safety sensitivelabor or services. The physical and environmentaldemands required to perform the essential duties of this position includestanding, walking, sitting, coordination, balance and agility demands, whichmay include the ability to stoop, kneel, squat, grasp, reach, performrepetitive hand movements. Additional demands may involve a specific level ofdexterity, grip strength, climbing and cardiorespiratory demands. The use ofappropriate safety equipment will be mandatory in these areas to preventhazardous contact. Comments/Special Instructions Electrician II work schedule Mondaythrough Friday 630 AM to 3 PM, will require to go on on call rotating scheduleonce trained.

Ocean Coast Electric LLC New Jersey 401K, Medical, Dental, Vision Sponsored apprenticeship program Tuition assistance Full-Time Ocean Coast Electric is seeking responsible, dedicated, and reliable electricians of all levels to bring their talents, expertise, and opinions to our staff. About Ocean Coast Electric LLC: Ocean Coast Electric is one of the top 5 electrical contractors for commercial and industrial projects. We specialize in turnkey design build warehouses and office fit outs. Ocean Coast prides themselves on having a friendly, team oriented, and encouraging staff. There is exponential room for growth when you join our team! Responsibilities: - High Quality new installations of conduit, cable tray, wiring and equipment. - Efficient and safe service and repair of existing electrical equipment. - Neat appearance. - Good customer manner. - Able to work independently and with a team. - Priority on safety. - Managing with great leadership skills. Preferred: - OSHA 10. - Bucket truck experience. - Boom lift and scissor lift certifications. Qualifications: - Must have a minimum of 5 years practical electrical field experience - Knowledgeable of NEC codes and industry standards - Trained, skilled and resourceful - Able to use tools and equipment - Strong problem solving and critical thinking skills - Strong understanding of electrical installation means and methods - Valid drivers license - Team player - Excavator Job Type: Full-time Benefits: 401(k) Dental insurance Flexible spending account Health insurance Paid time off Tuition reimbursement Vision insurance Education: High school or equivalent (Preferred) Experience: Electrical Experience: 5 years (Required) License/Certification: Electrical License (Preferred) Driver's License (Required) Work Location: In person

Con Edison's Protective System Testing (PST) team is responsible for the protection and control of the electrical system that powers one of the largest cities in the world. Our Electrical Technicians play a dynamic and vital role in ensuring that our Substation Protection and Control systems meet industry standards and continuously work on new and exciting technology to upgrade our systems. They work on a variety of projects and equipment including installation and testing of large power transformers and circuit breakers and microprocessor-based relay installations, to name a few. Required Education/Experience * Associate's Degree Candidates for this position must possess an Associate's Degree in Electrical Technology, or related field of study. Or High School diploma with 2 years of academic programs completed in a Bachelors of Engineering program. Or High School diploma with 2 years of military academic programs to include one of the following: Nuclear Electronics Technician, Nuclear Electrician, and Aviation Electronics Technician (or applicable). and Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Candidates must have knowledge and experience with computer systems and are able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Preferred Education/Experience * Bachelor's Degree Bachelor's Degree of Engineering in a related field and applicable work experience is preferred. and Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Candidates must have knowledge and experience with computer systems and must be able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Relevant Work Experience * Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Required * Candidates must have knowledge and experience with computer systems and must be able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Required Licenses and Certifications * Driver's License Required Physical Demands * Able to work in all weather conditions, i.e. excessive heat and/or cold * Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs * Ability to work in adverse conditions that include, noise, confined spaces, and high elevations * Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces) * Ability to work with, and in, the vicinity of high voltage and/or other high-energy systems * Ability to be approved to wear and use either a full or half-face respirator and self-contained breathing apparatus (SCBA), without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations * Ability to climb in and out of manholes and excavations * Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday * Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses * Work with equipment with a manufacturer weight rating of 350lbs * Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment Additional Physical Demands * Must be able to respond to Company emergencies by performing a System Emergency Assignment to restore service to our customers. Core Responsibilities * Learn how to test complex circuits, read AC and DC schematics, interpret and use wiring diagrams, and understand microprocessor relay logic. * Participate in extensive training program consisting of in-house classroom and lab training at our state-of-the-art Learning Center and hands-on training in the field. * Learn about the operation, maintenance, and testing of protective relay systems, and transmission and distribution equipment. * Work on electrical construction projects, performing acceptance testing, and commissioning new protection systems and equipment. * Perform testing, troubleshooting and repairs on protective relays and system, substation equipment, control systems and telephones lines in substation and other locations. * Able to travel and work in any location within the Company and service territory. * Ensures that all work is being performed in effective and efficient manner. * Ensures that the Human Performance Improvement (HPI) tools are incorporated into the plan and daily work activities. * Committed to fostering a Zero Accident Culture, Diversity and Inclusion, achieving operational excellence, developing an effective Cost Management Culture and enhancing the customers experience. * Committed to the Way We Work Principles, and adherence to the Companys Standards of Business Conduct and other Company procedures and other company procedures including Environmental, Health and Safety (EH&S).

Benefits: Dental insurance Health insurance Vision insurance Job Title: Maintenance Technician Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities Conducting and completing scheduled preventative maintenance to maintain equipment efficiency. Knowledge of Computer Maintenance Management Systems (SAP preferred). Disassemble and assemble equipment for new installation and repair existing equipment. Assist operators in mechanical and electrical capacities to ensure production lines remain operational. Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment. Knowledge of using human machine interfaces to ensure equipment is operating on center lines. Ability to convert production lines to produce various products of different sizes materials. Properly troubleshoot and maintain glue and adhesive systems on packaging equipment. Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches. Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry. Familiarity with boiler operations. Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.) Provide maintenance support required to sustain continuous production on the Food Service line. Lubricate all machinery with the proper lubricants. Change drive belts, timing belts, etc., on all machinery. When possible, identify problems before they result in a hazard or downtime situations. Maintain water towers and test water. Operate air compressor and change filters and oils. Change packing and gaskets in all pumps. Operate roof heaters and air conditioners. Identify and replace bearings and seals as required. Perform Other Duties as Assigned Qualifications High school diploma or GED preferred. Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired. Training in forklift and pallet jack operation helpful. Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful. Ability to work cooperatively with a team. Must have visual, auditory, physical and mental ability to operate equipment safely.

Job DescriptionBenefits/Perks Competitive Compensation Career Advancement Opportunities We are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: Follow all safety rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Install new electrical systems and repair existing systems Provide bids for work orders Interact with customers, suppliers, and other professionals Qualifications: Journeyman Electrician License Previous experience as an Electrician is preferred Valid Drivers License Ability to stand for long periods and lift heavy objects Strong understanding of mathematical concepts and measurements Professional appearance and courteous personality

Position Overview: This role involves the maintenance, repair, and enhancement of machinery utilized in food manufacturing processes. The main emphasis is on the upkeep and documentation of electrical and control systems, addressing both hardware and software aspects to ensure efficient production operations. Key Responsibilities: Maintain current documentation for all electrical and control systems. Assist Mechanics and Electro-Mechanics in diagnosing and resolving electrical or control-related issues. Provide training and coordinate the activities of Electro-Mechanics across all shifts as needed. Occasionally work offsite to support equipment troubleshooting and repairs. Ensure production equipment is maintained according to the production schedule. Conduct electrical and mechanical inspections safely while equipment is operational. Address corrective, preventive, or scheduled repairs during equipment downtime following company and vendor specifications. Work independently or with a mechanic to identify and rectify equipment failures, restoring production promptly. Complete tasks in adherence to government regulations, GMP, safety standards, quality control measures, and company procedures. Perform preventive, scheduled, or corrective maintenance on batching and continuous process control systems, including networks, AC/DC and servo drives, pneumatics, hydraulics, and mechanical components. Maintain secondary systems for steam, hot and chilled water, pneumatic air, electrical power, refrigeration, HVAC, and emissions control. Keep accurate work records in accordance with work orders, backlog, and job assignment systems. Carry out other assigned duties as required, which may include travel for parts procurement, training, or additional responsibilities. Aim to enhance the quality, legality, and safety of products and manufacturing processes. Ensure the assigned work area is clean and organized, reporting any potential contamination or suspicious activities to a Supervisor immediately. Qualifications: High school/military training and practical experience in a related field, with a background in complete machine and electrical control system installation. Familiarity with Rockwell, Siemens, and Mitsubishi software, as well as preventive maintenance software, is preferred. Ability to read and interpret electrical, mechanical, instrumentation, and control systems design documentation. Working knowledge of control system projects, including machine layout, control drawings, P&ID, and basic troubleshooting for A/B-Rockwell, Siemens, and Mitsubishi. Ability to perform basic and advanced mathematical calculations, converting units of measurement. Competent in completing forms detailing maintenance work performed. Proficient in reading and interpreting work orders, operating manuals, and maintenance instructions.

About Endot Industries, LLC Endot Industries, part of Infra Pipe Solutions Ltd., brings 50 years of expertise in manufacturing high-quality polyethylene pipe for water, wastewater, gas, and conduit applications across North America. We are currently seeking an Electrical Maintenance Technician to join our team. This role will be responsible for ensuring production and auxiliary equipment is functioning properly and within safety guidelines. Job Description: The Electrical Maintenance Technician will be primarily responsible for maintaining, repairing, and testing electrical systems and equipment within our industrial facility. Secondary responsibilities will include supporting the greater maintenance team with general mechanical repair and maintenance tasks, including line changeovers when required. The ideal candidate will have a strong understanding of electrical systems, control wiring, safety protocols, and the ability to work independently or as part of a team. This position can be either 8am-4pm, 10am-6pm, or 4pm- 12am M-F plus overtime as required. Key Responsibilities: · Inspect, test, troubleshoot, and repair production machines and supporting equipment. · Communicate production machine and supporting equipment operational concerns with operators, other maintenance technicians, and supervisors to diagnose and repair issues. · Wire new circuits from 24V DC up to 480V AC and perform repair of existing circuits in that range. · Install and wire new equipment and components, per manufacturer specifications. · Assemble, install, and maintain gears, shafts, seals, bearings, and other mechanical system components. · Assemble, install, and maintain motors, transformers, wiring, and other electrical system components. · Assemble, install, and maintain plumbing systems and components for water, gas, hydraulic, and pneumatic systems. · Diagnose, repair and replace readouts, contactors, heat controllers, heater bands, and related/similar equipment. · Diagnose and repair industrial inkjet printers. · Repair, maintain, and improve the physical/electrical infrastructure of the production facility. · Diagnose and repair problems in machinery controlled by PLCs and operated by VFDs. · Maintain work area, tools, and equipment with attention to safety and cleanliness. · Perform preventive maintenance on specified machinery, in accordance with a structured preventive maintenance program. · Perform other duties as assigned. Qualifications: · High school diploma or general education degree (GED) is required. · Relevant Technical, Vocational, or Military training certificate or degree is preferred. · 5 years hands-on maintenance experience is required. · Ability to read and interpret electrical schematics is required. · Ability and desire to work overtime and on-call as required. · Bilingual (English/Spanish) is preferred. · Automation/PLC systems experience preferred. · Experience using MaintainX is preferred. Benefits: · Competitive salary, commensurate with experience. · Strong safety program. · Opportunities for career advancement. · Health, Dental, and Vision insurance. · 401(k) match. · Paid Vacation and PTO. · Ongoing training and support. Endot is committed to equal opportunity employment. Only those selected for an interview will be contacted. No phone inquiries, please. Endot does not accept unsolicited Agency resumes.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Mechanic (GMM) in a motorized role, you will be a part of Delta's Ground Support Equipment team. This opportunity requires 6 months of experience in a vehicle/heavy equipment maintenance environment and an understanding of mechanical, electrical, hydraulic, and pneumatic fields as they apply to industrial powered systems. A GMM (Motorized) performs similar tasks of a semi-skilled vehicle/heavy equipment maintenance mechanic. Summary of responsibilities: Applies appropriate tooling, equipment, and material to accomplish minor maintenance functions including inspections, minor troubleshooting, repairing, removing, and replacing components on select Ground Support Equipment. Assists a Lead Ground Maintenance Technician or a Ground Maintenance Technician on motorized equipment as needed. Completes data entry to record work assignments and will connect with other Company personnel as needed. External Applicants Only - Ground Maintenance Mechanic (Motorized) hired to work at the JFK airport receive a $2,500 sign-on bonus. You will receive $1,250 after 90 days of employment and the remaining $1,250 after 180 days of employment. Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta's recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta's recruitment team, you can contact ...@delta.com . Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) Consistently prioritizes safety and security of self, others, and personal data. Embrace diverse people, thinking, and styles. Possesses a high school diploma, GED, or high school equivalency. Is at least 18 years of age and has authorization to work in the United States. Must have a valid driver's license. Must be proficient in English. Ability to lift items weighing between 50 and 70 pounds. Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays. Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. What will give you a competitive edge (preferred qualifications) A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas. Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics. Strong communication while working as a team and coordinating repairs with other Delta personnel and outside vendors. Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations. Completion of a two-year degree at a post-secondary technical school and/or related Military experience. Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values - Care, Integrity, Resilience and Servant Leadership - every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: Competitive salary, industry-leading profit sharing program, and performance incentives. 401(k) with generous company contributions up to 9%. New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 - March 31). In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period. LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program. 10 paid holidays per calendar year. Birthing parents are eligible for 12-weeks of paid maternity/parental leave. Non-birthing parents are eligible for 2-weeks of paid parental leave. Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits. Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages. Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health. Domestic and International space-available flight privileges for employees and eligible family members. Career development programs to achieve your long-term career goals. World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint. Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies. Recognition rewards and awards through the platform Unstoppable Together. Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

Con Edison's Protective System Testing (PST) team is responsible for the protection and control of the electrical system that powers one of the largest cities in the world. Our Electrical Technicians play a dynamic and vital role in ensuring that our Substation Protection and Control systems meet industry standards and continuously work on new and exciting technology to upgrade our systems. They work on a variety of projects and equipment including installation and testing of large power transformers and circuit breakers and microprocessor-based relay installations, to name a few. Required Education/Experience Associate's Degree Candidates for this position must possess an Associate's Degree in Electrical Technology, or related field of study. Or High School diploma with 2 years of academic programs completed in a Bachelors of Engineering program. Or High School diploma with 2 years of military academic programs to include one of the following: Nuclear Electronics Technician, Nuclear Electrician, and Aviation Electronics Technician (or applicable). and Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Candidates must have knowledge and experience with computer systems and are able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Preferred Education/Experience Bachelor's Degree Bachelor's Degree of Engineering in a related field and applicable work experience is preferred. and Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Candidates must have knowledge and experience with computer systems and must be able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Relevant Work Experience Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Required Candidates must have knowledge and experience with computer systems and must be able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Required Licenses and Certifications Driver's License Required Physical Demands Able to work in all weather conditions, i.e. excessive heat and/or cold Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs Ability to work in adverse conditions that include, noise, confined spaces, and high elevations Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces) Ability to work with, and in, the vicinity of high voltage and/or other high-energy systems Ability to be approved to wear and use either a full or half-face respirator and self-contained breathing apparatus (SCBA), without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations Ability to climb in and out of manholes and excavations Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses Work with equipment with a manufacturer weight rating of 350lbs Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment Additional Physical Demands Must be able to respond to Company emergencies by performing a System Emergency Assignment to restore service to our customers. Core Responsibilities Learn how to test complex circuits, read AC and DC schematics, interpret and use wiring diagrams, and understand microprocessor relay logic. Participate in extensive training program consisting of in-house classroom and lab training at our state-of-the-art Learning Center and hands-on training in the field. Learn about the operation, maintenance, and testing of protective relay systems, and transmission and distribution equipment. Work on electrical construction projects, performing acceptance testing, and commissioning new protection systems and equipment. Perform testing, troubleshooting and repairs on protective relays and system, substation equipment, control systems and telephones lines in substation and other locations. Able to travel and work in any location within the Company and service territory. Ensures that all work is being performed in effective and efficient manner. Ensures that the Human Performance Improvement (HPI) tools are incorporated into the plan and daily work activities. Committed to fostering a Zero Accident Culture, Diversity and Inclusion, achieving operational excellence, developing an effective Cost Management Culture and enhancing the customers experience. Committed to the Way We Work Principles, and adherence to the Companys Standards of Business Conduct and other Company procedures and other company procedures including Environmental, Health and Safety (EH&S).