Electrician technician jobs in Flower Mound, TX

To complete inspections and repair of electrical equipment including rides and other park facilities. Responsibilities: Specific Duties and Responsibilities: Repair electrical and electronic equipment Analyze equipment malfunctions to determine cause and corrective action Access all areas of ride structures for inspections and maintenance Install adequate temporary and/or permanent power for events and festivals throughout the season Assist with various electrical needs for new construction and remodeling projects as assigned Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them Maintain positive interaction with other employees and guests Other tasks and duties as assigned Qualifications: State Journeyman's license preferred Theme park ride experience a plus Must be experienced in maintaining and troubleshooting equipment using PLC, and relays Experience in installation, repair, and maintenance of electrical equipment Able to stand and walk for long periods of time outdoors in extreme heat/cold and sun Able to carry tools and lift at least 50lbs Must be comfortable working at heights over 50ft Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed Must possess a valid Driver's License with a good driving record Must be at least 18 years of age

Specific Duties and Responsibilities: Repair electrical and electronic equipment Analyze equipment malfunctions to determine cause and corrective action Access all areas of ride structures for inspections and maintenance Install adequate temporary and/or permanent power for events and festivals throughout the season Assist with various electrical needs for new construction and remodeling projects as assigned Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them Maintain positive interaction with other employees and guests Other tasks and duties as assigned Reporting Structure: Reports to the designated Electrical Foreman Skills and Qualifications: State Journeyman's license preferred Theme park ride experience a plus Must be experienced in maintaining and troubleshooting equipment using PLC, and relays Experience in installation, repair, and maintenance of electrical equipment Able to stand and walk for long periods of time outdoors in extreme heat/cold and sun Able to carry tools and lift at least 50lbs Must be comfortable working at heights over 50ft Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed Must possess a valid Driver's License with a good driving record Must be at least 18 years of age

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs competent break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to determine root cause of problem; dismantling devices to gain access to and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and repair items as necessary for equipment maintenance and repair. · With minimal instruction, performs maintenance as per industry standards. · Works with customer counterparts to execute maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, and applicable management systems. · Performs routine processes with and within industrial control systems to troubleshoots and analyzes complex equipment, perform equipment maintenance, and to resolve equipment problems. · Utilizes in-depth application of electrical, mechanical, and fluid power aptitude to troubleshoot and repair equipment. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Must be able to use basic hand tools and specialized tools as appropriate. · Possesses working knowledge and experience regarding electrical, mechanical, and fluid power systems in related fields. Can analyze the problems, synthesize alternative solutions, and perform repairs · Extensive travel required. (Local, National, International). Desirable KSAs: · Experience in preventative maintenance techniques, precision measuring, mechanical alignments, and general maintenance of applicable process equipment. · Exposure to programmable logic controllers, field devices, and electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Malin's Field Service Technicians play in integral part in making sure our customers' equipment remains up and running. You will be responsible for performing preventative and scheduled maintenance on lift trucks, conveyors, and other warehouse equipment; troubleshooting, diagnosing, and completing repairs. Our Technicians are one-of-a-kind - they thrive in supporting and servicing our customers with excellence. Requirements: Safety- and process-oriented in work application and operating a company vehicle Demonstrated abilities and skillset in mechanics, hydraulics and electrical Experience and interest in interacting and supporting business customers Excellent communication skills - listening to customer concerns, documenting work and talking to customers Savvy problem-solver Valid in-state driver's license and ability to pass background screens Highschool diploma or GED Our Support for Technicians: Competitive hourly rate to start with incremental increases based on attendance and performance No flag hours Guaranteed 80 hours per pay period for Technician availability Paid training with our onboarding program and certifications Majority Monday-Friday Schedule within extended Business Hours Overtime Hours Available Quarterly Bonuses Company Vehicle with Fuel Card Uniform self-serve accounts with allowance Work Boot Stipend upon hire Cell Phone reimbursement Tool Purchase Program after technical training completion Career mobility from within - Specialty Technician roles, Team Lead, Manager, Trainer, Sales, Recruiting All Employee Benefits: Full benefits package after 30 days of continuous employment Medical, dental, vision, short- and long-term disability, supplemental medical, legal coverage, ID theft protection, pet insurance Company-paid life insurance policies Employee Assistance Program to all employees and their families 401k with Company Match 7 Paid Holidays Paid Time Off If you have ANY of the following... let's talk. You've graduated from a trade school or 2-year college You've got previous mechanical experience within lift truck, automotive, aviation OR military industry You're mechanically talented - you've been fixing cars since you were a kid What now? Hit the APPLY button to complete our (less than 5-minute) application. Our Recruiter will call you to go over your background. Or contact us directly at ************ and ask to be connected to the Recruiting team

An Electrical Control Technician at Encore Wire will be primarily responsible for the safe rectification of machinery and equipment used in the various production plants and throughout the facility as directed by Supervision or Company dictated equipment priority. The Control Technician must be able to work on all facility wide electrical systems. A good understanding and experience of all mechanical and electrical disciplines is needed, these would include hydraulics and pneumatics. Essential Job Functions Experience and technical knowledge of the operation of AC and DC drives. A thorough understanding of speed feedback devices theory and operation. An understanding of temperature control and temperature components. A good understanding of PID and control loops. A good understanding of Ethernet communications and connections. Proficient in PLC and HMI systems, to include communications drivers and connections, PLC program navigation and controlled manipulation. A thorough understanding of all electrical components and electronic devices. Show an understanding and demonstrate the processes involved in diagnosing defective components, motors, drives and electronic components. Able to demonstrate the ability to use diagnostic equipment. Experience with selecting electrical components when original OEM components are not available. Other Skills/Abilities The candidate must be a Team player and be willing to share his knowledge freely. The candidate will be required to work with all team members undertaking any and all roles from leading a task to cleaning up after a task. A successful team member will have extremely good work ethic and a great punctuality and attendance record. Physical Requirements Requires repetitive movement Requires walking Requires kneeling, crouching and stooping Requires using hands to handle, control, or feel objects, tools or controls Requires lifting up to 50 pounds while bending, twisting and/or standing

Duties and Responsibilities is fully remote in that you must be able to travel 100% of the time to the job site. Must be fully qualified and capable of working directly with project management to understand and evaluate scheduled electrical work needed to complete projects in a timely manner. Must be capable of performing all duties associated with the crew lead position and in addition. Must be able to self-prepare for all scopes of electrical work needed by evaluating pictures from site assessment and communicating directly with the project management and design team about any necessary changes or improvements to the electrical plan set. These changes must be documented and sent to the project management team. Must maintain tools and materials needed to “adapt and overcome” any challenges in the field including utility shutdowns. Must be capable of communicating at a high level with city inspectors. Must maintain a 90% or higher pass rate on all electrical equipment wall installations and maintain less than 10% of service calls generated by installation-related quality issues. Must be capable of cross-training and crew development when assigned to supervise and support solar installation crews, allowing roof crew leads to self-perform installations while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process. Must be capable of supervising the crew while the electrical apprentice ( roof lead or other designated person by management) gets to experience electrical wall installation and service upgrades. Must have required personal tools of the trade, see “minimum required personal tools of the trade”. During the first 90 days you will be required to learn how to install Tesla Powerwall coupled with Enphase solar systems. We will be looking to you to run your own crew with a helper installing power walls and solar systems. By the end of the 90 days, you will be required to take a proficiency test. This test will include you installing a complete battery and solar system without the help of the lead electrician at Good Faith Energy. You must pass this test to be a lead electrician for Good Faith Energy. We will provide you with all the on-the-job training as well as classroom materials to advance your knowledge of the systems you will be installing. Attends all meetings and conference calls. Performs consistently with company core values Maintains strict confidentiality. Provides excellent customer service, for both internal and external customers. Follows all OSHA and other safety guidelines. Actively demonstrates teamwork at all times. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period. The duties described above are not inclusive. Additional duties may be permanently assigned or required from time to time due to the need to respond to customer needs and remain competitive in the marketplace. Minimum Knowledge, Skills, and Abilities Required Journeyman License (or be able to obtain the license) Pay will be based on license type Must be able to lift up to 75lbs. Must have a valid driver's license. Must be OSHA 10 certified. Must be qualified to operate company equipment (may include truck, trencher, man lift, forklift) and capable of operating any heavy equipment on the job. Proficient in the proper use of safety gear and training/supervising for working above 6' from the ground, roofs, ladders, etc. Must be CPR certified. Read all installation product manuals for devices installed. Communicate effectively through all work-related chat/email chains while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process.

Ecolab, the global leader in premium cleaning, sanitizing and maintenance products and services for the hospitality, institutional and industrial markets is seeking a Maintenance Technician. This role will perform regularly scheduled preventative maintenance, monthly safety checks, make repairs and modifications to equipment and repair the facility as needed. What's in it For You: The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best Comprehensive benefits package starting day one of employment including medical, dental, vision, matching 401k, company paid pension, stock purchase plan, tuition reimbursement and more! Click Here to see our benefits. What You Will Do: Interface with production/warehouse supervision to effect safe repairs to equipment and ensure that equipment is returned to operations in an acceptable condition Perform regularly scheduled preventive maintenance and monthly safety checks Make repairs & modifications to equipment and facilities as scheduled through the work order system Responsible for completing all paperwork assigned and coordinating with the Reliability Supervisor to ensure data is correct and recorded Other duties as assigned Position Details: Plant location: Garland, TX Work week and shift: C shift - Monday to Friday, 9:30PM - 5:30AM Compensation package offered: $32.00 per hour Minimum Qualifications: High School diploma or equivalent 2 years of experience in an industrial maintenance environment 1 year of experience with electrical and mechanical systems in an industrial environment Ability to read and understand manuals and schematics in English No immigration sponsorship offered for this role Physical Demands: Must be able to lift/carry 50lbs Able to work in difficult situations such as confined spaces, heat, and heights Must be able to pass a drug screen and physical exam Preferred Qualifications: Formal vocational training in plant maintenance activities with emphasis on industrial applications or equivalent job experience in electricity, power distribution, industrial electrical wiring, mechanics, machine operations, general plumbing, heating ventilation and air conditioning, and/or boiler operations Experience with electronic and PLC based applications in an industrial environment. Experience with pumps, welding, bearings, electrical safety, forklifts, gears, hydraulics, valves, and rigging Experience in a Lean Environment Annual or Hourly Compensation Range: The pay rate for this role is $32.00 per hour. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here . Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Start a fulfilling career as a Warehouse Maintenance I! We're a team. Our success is driven by the collective effort of each member in our warehouse, which has set us apart in the industry for 130+ years. We're dedicated to collectively challenging any supply chain problem with top-of-the-line technology and safety measures carried throughout the process. We wouldn't be where we are without our warehouse team. It's why we've built a culture-focused and diverse environment for you that offers opportunities for advancement with industry-leading benefits. The Maintenance I teammate troubleshoots, repairs, and perform preventive maintenance actions on material handling equipment and other facility support systems in the distribution center environment. Benefits you can count on: Pay rate: $19.50-25.00 per hour. (Based on Experience) Generous benefits that start on your 60th day: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. Earn vacation time, and sick leave accrual from day one and paid holidays after 90 days. 401(k) Profit Sharing Plan after 90 days. Additional benefits: pet insurance, parental leave, employee assistance programs, discount programs, tuition reimbursement program, and more! What you'll do as a Warehouse Maintenance I: Ensure that spare parts usage, inventory and work order actions are accurately tracked and documented according to Company policy. Assist with DC maintenance requirements such as (but not limited to) refrigeration systems, plumbing, building lighting, welding, dock doors, air systems, racking, tote washer, and air spray painting. Maximize availability of all classes of batteries by managing charging cycles and battery rotation. Perform inspections and cleaning; do specific gravity checks; evaluate cable serviceability and repair damage. Develop a working knowledge of the required aspects of the McLane Maintenance Connection database. Other duties may be assigned. Qualifications you'll bring as a Warehouse Teammate: At least 18 years of age. High School Diploma or GED preferred. At least 1 year of professional experience in industrial maintenance. At least 1 year of maintenance experience with material handling equipment. Able to read and understand electrical schematics. Experience with distribution center industrial equipment, including (but not limited to) forklifts, reach trucks, order pickers, tuggers, and carts. Knowledge of OSHA regulations. Basic computer skills with experience in a maintenance database such as MP2, DataStream 7i, or Maintenance Connection. This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards. Fit the following? We want you here! Organized Problem solver Teamwork oriented Safety conscious Detailed Moving America forward - together. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of teammates for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit

We are seeking experienced Equipment Technicians for a globally leading manufacturing client in Wilmer, TX. This is a fantastic opportunity to work for the global leader in its manufacturing field with many advancement opportunities. Qualifications High School Diploma or equivalent. 3-5 years hands-on experience in maintaining, troubleshooting, and repairing automated equipment. Strong mechanical and electrical troubleshooting skills, with the ability to repair motors, pumps, valves, sensors, PLCs and letter logic. Hands-on experience with machine control and industrial robotics. Good knowledge of electrical and pneumatic systems. Proficiency in using hand tools, power tools, and diagnostic equipment such as multimeters, oscilloscopes, and calipers. Ability to work in a fast-paced environment and multi-task effectively. Prior experience panel manufacturing equipment, such as lamination and soldering machines, is desired, but not required. Working experience in a production or manufacturing environment. Responsibilities Perform routine preventive maintenance on production machinery and ensure they are running efficiently to minimize downtime. Diagnose and troubleshoot electrical, mechanical, and pneumatic issues on various types of production equipment. Detect, isolate, and identify irregularities and malfunctions in automated machinery and equipment. Repair and replace machine components including motors, bearings, belts, sensors, and wiring. Inspect and maintain production equipment such as conveyors, presses, cutting, and packaging machinery. Maintain accurate maintenance logs, documenting repairs, adjustments, and preventive maintenance tasks. Assist in the installation, testing, and commissioning of new equipment. Read and interpret schematics and manuals to understand the technical aspects of equipment and perform repairs accurately. Collaborate with process and production teams to implement equipment modifications and improve efficiency. Provide training to new oncoming technicians on operation of equipment. Ensure compliance with safety standards, proper use of PPE, and adherence to company policies during maintenance work.

Across the industrial design, manufacturing and maintenance worlds, we're the digital destination for product and service solutions to help our customers with the maintenance, repair and operation of their businesses. We provide global access to an unrivalled range of over 750,000 stocked industrial products. Each day our team of experts deliver solutions to resolve our customer's challenges across design, procurement, inventory and maintenance. We consistently strive to deliver the best possible service to all of our customers and challenge ourselves to provide a seamless procurement experience. We are one team. We deliver brilliantly. We do the right thing. We make every day better. These are our values. They unite our c.9,000 global colleagues and differentiate us from our competition. They are a mix of how we work today and how we must step up for the future. Most importantly, it is one set of values shaped by our people, for our people. Together, we can make great things happen. Aim for amazing and beyond. About the Role Role Purpose Maintenance Electrician is responsible for ensuring the safe, efficient, and uninterrupted functioning of a facility's electrical systems and equipment through a mix of preventative maintenance, routine inspections, and emergency repairs. This role requires a strong understanding of electrical codes, the ability to interpret technical diagrams, and excellent problem-solving skills. Key Responsibilities Inspection and Testing: Regularly inspect, test, and diagnose faults and malfunctions in electrical systems, components (e.g., transformers, circuit breakers, switches, and relays), and related electro-mechanical systems. Preventative Maintenance: Develop and perform routine preventative maintenance on facility machinery and equipment to identify and fix minor issues before they become major problems and ensure ongoing safety and efficiency. Repair and Troubleshooting: Respond to emergency breakdowns and troubleshoot complex electrical issues using various testing devices (e.g., volt-ohmmeters, ammeters). Repair or replace faulty wiring, equipment, or fixtures, such as motors, lighting systems, and control panels. Installation and Modification: Install, modify, and upgrade new and existing electrical systems and equipment, ensuring all work is in accordance with applicable local, state, and National Electrical Codes (NEC) and safety regulations (OSHA). Blueprint and Schematic Interpretation: Read, interpret, and analyze blueprints, schematics, and technical diagrams to determine wiring methods, plan installations, and ensure compliance with design specifications. Documentation and Record Keeping: Maintain accurate and detailed records of all maintenance, repairs, inspections, and materials used, often utilizing a Computerized Maintenance Management System (CMMS). Collaboration and Guidance: Work closely with other tradespeople, engineers, and contractors. May be required to guide or train maintenance workers or apprentices. Inventory Management: Assist in identifying and procuring necessary equipment and supplies, ensuring an adequate inventory of spare parts and components. Essential Skills & Experience Education: A high school diploma or equivalent is required, along with completion of a technical training program in electrical maintenance or an electrician's apprenticeship. License/Certification: A journeyman electrician license is typically required. A valid driver's license required. Experience: Several years of progressively responsible experience in the electrical trade, with a thorough working knowledge of electrical codes for installation and maintenance. Experience with PLCs (Programmable Logic Controllers), hydraulic, and pneumatic systems is often desirable in industrial settings. Technical Skills: Proficiency in using a wide range of electrical test equipment, hand tools, and power tools; strong knowledge of electrical theory, power distribution, and load calculations. Desirable Skills & Experience Strong problem-solving and critical thinking abilities. Excellent attention to detail and a commitment to safety protocols. Effective communication and teamwork skills. Physical strength and stamina to lift heavy equipment (up to 50 lbs frequently) and work in various conditions, including confined spaces or at heights. Color vision is essential for identifying electrical wires. Equal Employment Opportunity RS Americas is an equal opportunity employer and maintains policies and practices that are designed to prevent and prohibit unlawful discrimination against any qualified employee or applicant on the basis of race, color, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, military/veteran status, disability, genetic information, citizenship status, or any other unlawful classification to the extent protected by law. This policy of non-discrimination applies to all employment practices, including hiring, compensation, benefits, promotion, training and termination. Employees who engage in unlawful discrimination will be subject to disciplinary action, up to and including termination. #LI-CC1

Job Description The Maintenance Electrician inspects, repairs, coordinates, installs, modifies and maintains electrical-systems and electrical and mechanical equipment to ensure continuous proper operation at the AAC facility during varying shift times, including nights, weekends and Holidays. This FULL TIME direct hire position is great for someone looking to move indoors and get away from the Texas heat or gain experience to work towards their masters electrician license. Comes with benefits such as medical, dental, vision, PTO, 401(k), etc. Essential Functions: Performs and documents preventive maintenance on all electrical systems, control systems, and vertical transportation control systems to ensure excellent working conditions and compliance to all applicable codes; Maintains all electrical circuitry and equipment in excellent working condition; including but not limited to stationary and moving equipment normally involved in the operation of a large multi-use facility; Assists other trade personnel in making various repairs in the arena; Performs operation of facility equipment and heavy machinery as required for facility operation; Provides emergency repairs to arena equipment during event operations to ensure the success of the event; Coordinates and supervises contractors and vendors performing electrical or electronic work in the facility; Utilizes CMSS system to include interpreting/prioritizing work orders, performing work requested and completing work orders per instruction; Programs and troubleshoots PLC based control systems; Maintains a working knowledge of Security (CCTV) and Fire systems; Maintains and performs working assignments on all voltage systems including 120/208, 277/480 and 5KV; Other duties as assigned. Education/Qualifications: College Degree in an electrical technology field preferred or High School Diploma/GED or graduated from a certified electrical apprenticeship program Bilingual English/Spanish is preferred 5 years minimum of commercial Journeyman experience Working knowledge of PLC is preferred Must have extensive knowledge of the NEC Must have advanced education in the maintenance repair and operation of electrical equipment, mechanical and production based equipment and control systems and typical public assembly of facility equipment Must possess a current State of Texas Journeyman Electrical License Knowledge of electrical safety Personifies our core values of INTEGRITY, TEAMWORK, PASSION, and EXCELLENCE at all times. Physical Demands/Work Environment Ability to reach with hands and arms use hands to handle, or feel, stand, climb or balance and stoop, kneel, crouch, or crawl, walk and sit; Ability to lift and/or move up to 50 pounds while twisting and/or turning working at heights, including Catwalk work, and frequent climbing of stairs and ladders Ability to work in small and confined spaces Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus Ability to work at heights and in extreme conditions Must be flexible in ability to work all hours/shifts in a 24/7 facility. Work hours are based on Events. Ability to respond during normal business hours, after hours and on weekends via cell phone is required/company phone allowance is provided. Employee selects service plan and is responsible for the repair and/or replacement of the phone Employees with this phone access requirement are not restricted in their movement, location, and activities during off hours when they are not at work The noise level in the work environment is usually moderate, however, during events, the noise level may be loud Position is required to work in exposed wet and/or humid conditions Position is required to work near moving mechanical parts, high, precarious places, fumes or airborne particles, toxic or caustic chemicals, outside weather conditions, extreme cold, extreme heat and risk of electrical shock Employees must be able to work on evenings, weekends and holidays as required.

Full-time Description We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock's dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation's most dependable microgrids - all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you'll do… We are seeking a skilled Electrical Technician, Automation & Controls to support the integration, commissioning, and optimization of generator packages and electrical systems within advanced microgrid projects. This role is hands-on and dynamic, requiring expertise in automation, controls, and system performance to help ensure reliable, safe, and compliant operations. This is a field position based out of Dallas - Fort Worth, Texas and will report directly to the Manager of Automation & Controls Engineering. You'll make an impact by: System Integration & Commissioning Contributing to the integration of generator packages, switchgear, and electrical systems in line with project specifications, safety protocols, and timelines. Carrying out and validate cable schedules, control packages, and system testing protocols. Performing start-up and performance testing activities to confirm operational readiness and safety compliance. Project Execution & Handover Supporting the transition from construction to commissioning and operations teams by confirming integration requirements are met. Tracking and closing punch list items by documenting deficiencies and assisting with resolution. Providing troubleshooting support during early operational phases following system integration. Technical Contribution Assisting in troubleshooting automation, protection, and control systems (e.g., Schneider PLCs, DeepSea Controllers, ABB Relays, SEL devices). Participating in the development and delivery of training for site personnel and contractors on microgrid operations, controls, and start-up procedures. Helping maintain documentation control and reporting, ensuring accurate project records. Collaboration & Reporting Communicating progress and technical findings with project management and integration teams. Using tracking tools to update key milestones, risks, and solutions. Contributing to identifying risks and ensuring compliance with SHE standards, company protocols, and regulatory requirements. Safely preparing, operating, and maintaining a motor vehicle for purposes of conducting company business You'll sweep us off our feet if you: Have strong analytical and have problem-solving abilities in automation and control systems. Are collaborative and effective working style with team members and contractors. Are proactive, self-motivated, and eager to take ownership of tasks. Are flexibile and able to adapt to shifting project requirements and deadlines. Have hands-on background in technical fields related to power generation, electrical construction, and commissioning. Are committed to safety, reliability, and operational excellence Requirements What you'll need: 3+ years of experience in the energy sector (or equivalent electrical experience), with emphasis on power generation, automation, and controls. Associate's degree (desired) in electrical, automation, or related technical discipline. Knowledge of microgrid operations, system integration, and applicable codes/standards. Hands-on experience with control and protection equipment such as: Schneider PLCs, DeepSea 8660 & 8610 Controllers (or equivalent), or ABB 615 Relay, SEL 700G, SEL 700GT, SEL RTAC Experience working across multiple stages of project execution. Physical ability to work in field environments, including adverse weather conditions, lifting up to 50 pounds, and performing physically demanding tasks. Your Rewards! Medical, Dental, Vision, and Prescription Drug Insurance Company-Paid Life Insurance Flexible Spending Account (FSA) Health Savings Account (HSA) Wellness Programs and Incentives 401(k) Retirement Plan & Company Match Paid Time Off - Sick & Vacation Time Paid Holidays Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education - to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values, specifically our value of “The Team”, which includes “Mutual Respect, Openness, and Honesty.”

MAINTENANCE TECHNICIAN GENERAL PURPOSE Demonstrate full proficiency in maintenance/mechanical activities to ensure that all equipment is operating effectively and efficiently. Perform general maintenance, preventative maintenance, over-hauls, modification, fabrication, welding, and/or mechanical and electrical troubleshooting and repair. Work with a limited degree of supervision, with oversight focused on complex and/or new assignments. Act as an informal resource for colleagues with less experience. JOB DUTIES AND RESPONSIBILITIES · Perform maintenance and/or repairs (planned, unplanned, emergency) on production, processing, and packaging equipment as well as utility related equipment or systems, following all safety procedures · Perform preventative maintenance; perform routine inspections of equipment for assessment of reliability and performance · Read, analyze, and interpret technical procedures, electrical schematics, service manuals, and work orders to perform required maintenance and service · Support the installation of new equipment · Assist operators with training or troubleshooting to minimize equipment downtime · Complete work orders in a timely manner, while maintaining high quality standards · Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties · Maintain communication with other departments, management, and employees and notify them of any problems and/or concerns that may restrict the efficiency of production · Ensure all repairs are documented. Complete all paperwork clearly, legibly, and accurately with required information. Document all required information in accordance with standard operations procedures · Stay up to date on new products, equipment, technology and techniques · Utilizing continuous improvement mindset, assist in identifying opportunities to improve processes · Exhibit the ability to anticipate parts requirements for the tasks, follow proper purchasing procedures, and acquire parts ahead of anticipated task performance · Maintain safe working conditions for employees and compliance with all state and federal regulations regarding health and safety issues · Follow all DFA good manufacturing practices (GMP) and work in a manner consistent with all corporate regulatory, food safety, quality, and sanitation requirements · The requirements herein are intended to describe the general nature and level of work performed by employee, but is not a complete list of responsibilities, duties, and skills required. Other duties may be assigned as required Pay: $34.75

Job DescriptionDescription: Install and perform preventative maintenance on electrical equipment, and participate in facilities and maintenance department activities and projects. Essential Duties and Responsibilities include the following, other duties may be assigned: Promote working in a safe manner including completing JSA's and developing safe work plans for hazardous situational work, establishing designated work zones with posted signage, communicating hazards adequately to nearby employees, utilizing proper PPE, initiating stop-work practices in unsafe situations, reporting incidents and injuries promptly, and confronting unsafe acts and situations related to contractor work. Responsible for planning, assembling, installation, maintenance and testing of electrical equipment and wiring systems in an industrial setting, including AC/DC voltages, single and 3-phase, and wireless equipment Calibrate, install, and maintain transmitters, transducers, and other sensing equipment Make recommendations for the improvement of the operation of existing electrical systems and designs/layouts for future electrical systems including researching, developing plans, and submitting purchasing requests Perform PM's, troubleshooting, repairs, adjustments, and installations to industrial electrical systems including electrical components of mechanical systems, for systems up to 600 VAC, and for control systems up to 50 VDC, motor and motor controls, HVAC, lighting, access controls, cameras, and other equipment. This will require weekly and monthly inspections of equipment and good record keeping ability Assist in on-the-job training of apprentice electricians, technicians, and uphold RECARO expectations of contractors Adhere to the RECARO Lock out/Tag out program, work with Arc Flash equipment, and other OSHA requirements and standards Participate in ariel work, overhead lifting activities, loading and unloading of equipment, and other setup and relocation of heavy equipment or objects Light plumbing, fabricating, painting, housekeeping, groundskeeping, facilities inspection overhead doors repairs, events setup and teardown, inclement weather preparations, assisting other tradesman and emergency repairs Promoted good housekeeping including adherence to Bloodborne Pathogens standards and maintain an organized work area Coordinate with external vendors Maintain compliance with Federal and State Environmental regulations and agencies within RECARO guidelines Operate forklift, scissor/boom man lifts, company vehicles and other necessary equipment to perform job duties Able to work periodic weekends and evenings to accomplish certain tasks in non-production hours to minimize the impact to production Motivated self-starter who can manage tasks and projects and make decisions, and is also willing to be apart of a high performing team Requirements: Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Possess Journeyman Electrical license At least 5 years Journeyman Electrician experience, Industrial Electrical experience preferred Must be able to use multi-meters, meggar, amp probe, thermal imaging devices and other instruments used in troubleshooting electrical equipment Basic knowledge of National Electrical Code High school diploma or equivalent At least 5 years experience in some type of maintenance support in manufacturing environment Ability to remain flexible in a dynamic business environment Ability to read/comprehend electrical schematics and technical information Work effectively as a team member Prioritize and complete multiple tasks and responsibilities Certificates and Licenses: Journeyman Electrical License Valid Drivers License

Job Description PRIMARY FUNCTION Under the guidance of the Maintenance Supervisor, the Electro-Mechanical Technician (EMT), supports operation, inspection, and maintenance processes from mechanical, electrical, and plumbing for all production equipment and systems within the facility. The position is responsible for repairing and installing advanced production/manufacturing equipment. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. May mentor and provide support to less experienced mechanics. Diagnoses equipment malfunctions and makes more complicated repairs or adjustments as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES Perform preventative maintenance on more advanced/sophisticated production equipment. Perform repairs on more advanced production equipment as needed. Perform breakdown analysis. Oversee or perform general housekeeping and upgrade production lines with new/upgraded equipment/technology. Direct activities of outside contractors working on assigned line. Change line for package changeovers. Enforce GMP, safety, and audit standards. Work independently under limited supervision (self-management) Documentation of work schedule and work tasks completed. Respond effectively to all emergencies. Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them. Complies with all policies for the safe storage, usage, and disposal of hazardous materials. Participate in ongoing technical, safety, and operational process training programs. Maintains a clean and safe work environment and maintains compliance with State, County, or City Ordinances, Codes, or Laws. Documents work performance and materials procurement as directed, using work order system. SUPERVISORY RESPONSIBILITIES N/A QUALIFICATIONS Minimum of a High School Diploma or equivalent. Associate' or Bachelor's Degree preferred. Ability to work flexible schedules/shifts/areas, including weekends, nights, and/or holidays. Experience working with computers and Microsoft Office (Including Outlook, Word, Excel). EXPERIENCES Completion of an applicable technical training program. 3+ years of applicable working experience in equipment maintenance, basic electrical and troubleshooting practices. 2+ years of experience in the operation and maintenance of a large-scale manufacturing facility Possess mechanical and electrical aptitude. A successful candidate must be self-motivated who can work independently or in a team. Ability to seek outside resources as needed. Excellent communication skills (orally and written LICENSURE: N/A KNOWLEDGE, SKILLS, AND ABILITIES Drives Performance: Holds self and others accountable for the achievement of performance expectations. Creates an environment that enables others to perform at their best. Acts Decisively: Makes and acts on decisions quickly and effectively and fosters the same in others. This is based on an underlying courage to enable risk-taking for the business. Project Management: Ability to manage, prioritize and lead numerous projects simultaneously. Impactful Insights: Demonstrates ability to pull together insights from a variety of sources and develop strategic guidance for brand teams that result in a business decision or action Collaboration: Demonstrated communication and teamwork skills; ability to gain consensus and act within a matrix team environment; ability to work in a collaborative and influencing fashion that drives to business action. TYPICAL WORKING CONDITIONS Incumbent must be able to operate a computer. Lift/carry 40lb. or less, push/pull 12lbs. or less. Stooping, bending, stretching, and reaching outward and over their head. This position may require extended periods of sitting, standing, and walking. Personal Protective Equipment (PPE) when necessary. May require travel. Associates will be required to take all appropriate training classes as required. Willingness to cross-train into other departments.

Please read the following job description thoroughly to ensure you are the right fit for this role before applying. To complete inspections and repair of electrical equipment including rides and other park facilities. Responsibilities: Specific Duties and Responsibilities: * Repair electrical and electronic equipment * Analyze equipment malfunctions to determine cause and corrective action * Access all areas of ride structures for inspections and maintenance * Install adequate temporary and/or permanent power for events and festivals throughout the season * Assist with various electrical needs for new construction and remodeling projects as assigned * Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them * Maintain positive interaction with other employees and guests * Other tasks and duties as assigned Qualifications: * State Journeyman's license preferred * Theme park ride experience a plus * Must be experienced in maintaining and troubleshooting equipment using PLC, and relays * Experience in installation, repair, and maintenance of electrical equipment * Able to stand and walk for long periods xevrcyc of time outdoors in extreme heat/cold and sun * Able to carry tools and lift at least 50lbs * Must be comfortable working at heights over 50ft * Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed * Must possess a valid Driver's License with a good driving record * Must be at least 18 years of age

Specific Duties and Responsibilities: Have you got what it takes to succeed The following information should be read carefully by all candidates. * Repair electrical and electronic equipment * Analyze equipment malfunctions to determine cause and corrective action * Access all areas of ride structures for inspections and maintenance * Install adequate temporary and/or permanent power for events and festivals throughout the season * Assist with various electrical needs for new construction and remodeling projects as assigned * Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them * Maintain positive interaction with other employees and guests * Other tasks and duties as assigned Reporting Structure: Reports to the designated Electrical Foreman Skills and Qualifications: * State Journeyman's license preferred * Theme park ride experience a plus * Must be experienced in maintaining and troubleshooting equipment using PLC, and relays * Experience in installation, repair, and maintenance of electrical equipment * Able to stand and walk for long periods of time outdoors xevrcyc in extreme heat/cold and sun * Able to carry tools and lift at least 50lbs * Must be comfortable working at heights over 50ft * Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed * Must possess a valid Driver's License with a good driving record * Must be at least 18 years of age

Job Details Encore Wire McKinney - McKinney, TX Full Time Full TimeDescription An Electrical Control Technician at Encore Wire will be primarily responsible for the safe rectification of machinery and equipment used in the various production plants and throughout the facility as directed by Supervision or Company dictated equipment priority. The Control Technician must be able to work on all facility wide electrical systems. A good understanding and experience of all mechanical and electrical disciplines is needed, these would include hydraulics and pneumatics. Essential Job Functions Experience and technical knowledge of the operation of AC and DC drives. A thorough understanding of speed feedback devices theory and operation. An understanding of temperature control and temperature components. A good understanding of PID and control loops. A good understanding of Ethernet communications and connections. Proficient in PLC and HMI systems, to include communications drivers and connections, PLC program navigation and controlled manipulation. A thorough understanding of all electrical components and electronic devices. Show an understanding and demonstrate the processes involved in diagnosing defective components, motors, drives and electronic components. Able to demonstrate the ability to use diagnostic equipment. Experience with selecting electrical components when original OEM components are not available. NOTE: This job description does not contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Qualifications Other Skills/Abilities The candidate must be a Team player and be willing to share his knowledge freely. The candidate will be required to work with all team members undertaking any and all roles from leading a task to cleaning up after a task. A successful team member will have extremely good work ethic and a great punctuality and attendance record. Physical Requirements Requires repetitive movement Requires walking Requires kneeling, crouching and stooping Requires using hands to handle, control, or feel objects, tools or controls Requires lifting up to 50 pounds while bending, twisting and/or standing

Full-time Description Install and perform preventative maintenance on electrical equipment, and participate in facilities and maintenance department activities and projects. Essential Duties and Responsibilities include the following, other duties may be assigned: Promote working in a safe manner including completing JSA's and developing safe work plans for hazardous situational work, establishing designated work zones with posted signage, communicating hazards adequately to nearby employees, utilizing proper PPE, initiating stop-work practices in unsafe situations, reporting incidents and injuries promptly, and confronting unsafe acts and situations related to contractor work. Responsible for planning, assembling, installation, maintenance and testing of electrical equipment and wiring systems in an industrial setting, including AC/DC voltages, single and 3-phase, and wireless equipment Calibrate, install, and maintain transmitters, transducers, and other sensing equipment Make recommendations for the improvement of the operation of existing electrical systems and designs/layouts for future electrical systems including researching, developing plans, and submitting purchasing requests Perform PM's, troubleshooting, repairs, adjustments, and installations to industrial electrical systems including electrical components of mechanical systems, for systems up to 600 VAC, and for control systems up to 50 VDC, motor and motor controls, HVAC, lighting, access controls, cameras, and other equipment. This will require weekly and monthly inspections of equipment and good record keeping ability Assist in on-the-job training of apprentice electricians, technicians, and uphold RECARO expectations of contractors Adhere to the RECARO Lock out/Tag out program, work with Arc Flash equipment, and other OSHA requirements and standards Participate in ariel work, overhead lifting activities, loading and unloading of equipment, and other setup and relocation of heavy equipment or objects Light plumbing, fabricating, painting, housekeeping, groundskeeping, facilities inspection overhead doors repairs, events setup and teardown, inclement weather preparations, assisting other tradesman and emergency repairs Promoted good housekeeping including adherence to Bloodborne Pathogens standards and maintain an organized work area Coordinate with external vendors Maintain compliance with Federal and State Environmental regulations and agencies within RECARO guidelines Operate forklift, scissor/boom man lifts, company vehicles and other necessary equipment to perform job duties Able to work periodic weekends and evenings to accomplish certain tasks in non-production hours to minimize the impact to production Motivated self-starter who can manage tasks and projects and make decisions, and is also willing to be apart of a high performing team Requirements Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Possess Journeyman Electrical license At least 5 years Journeyman Electrician experience, Industrial Electrical experience preferred Must be able to use multi-meters, meggar, amp probe, thermal imaging devices and other instruments used in troubleshooting electrical equipment Basic knowledge of National Electrical Code High school diploma or equivalent At least 5 years experience in some type of maintenance support in manufacturing environment Ability to remain flexible in a dynamic business environment Ability to read/comprehend electrical schematics and technical information Work effectively as a team member Prioritize and complete multiple tasks and responsibilities Certificates and Licenses: Journeyman Electrical License Valid Drivers License