Post job

Electrician technician jobs in Macon, GA - 211 jobs

All
Electrician Technician
Maintenance Technician
Industrial Electrician
Journeyman Lineman
Equipment Technician
Electromechanical Technician
Electrical Technician
  • Journeyman Lineman & Troubleman - Central & South Regions (Macon & Valdosta Areas)

    Southern Company 4.5company rating

    Electrician technician job in Macon, GA

    **Journeyman Lineman and Troublemen- Central and South Regions (Macon & Valdosta Areas)** **_Placement at a headquarters will be based on availability of openings and if you are in a commutable distance of the headquarters._** Candidate must live within a reasonable commuting distance of the assignment location in order to meet "call out" requirements. If a candidate does not currently live within this area, candidate must be willing to immediately relocate to meet this requirement. + Candidate must be available and accessible in times of emergency which could include evenings, weekends and holidays. + Candidate must be available and accessible at least 50% of time for emergency "call-out". + Candidate must be available for travel outside the state to support storm emergencies as needed. **JOB SUMMARY** + Job Duties include (but not limited to): + Pole Climbing (up to 60 feet). + Working in an overhead position while on the pole. + Pulling and splicing wires. + Installing Electrical Service (pole to pole OR pole to service point). + Operate/Drive Company Trucks including Bucket Trucks. + Operate heavy equipment (Backhoe or similar equipment). + Work in adverse conditions outdoors - day and night hours. + Operate Electrical system - Transmission, Substation and Distribution Switching + Writing Switching Orders + Basic understanding of electrical Distribution Systems + Troubleshooting + After Hours first responder Note: This is a position covered by a collective bargaining agreement between Georgia Power and IBEW Local 84 and is governed by this agreement. Union membership is optional. The starting salary for a Lineman is $49.55 (non-negotiable and level of experience does not apply) and this pay is governed by this agreement which includes an increase every six months assuming satisfactory performance, until you max out in your job classification and a negotiated general increase every July. **JOB REQUIREMENTS** Job Experience and Education + Experience as a Journeyman Lineman with a minimum of **5 years' experience in the electric utility industry and 3 years of Journeyman Lineman experience** working with voltages above 600 volts. + Overhead distribution experience (up to 25Kv) required. + Underground distribution experience (up to 25Kv) preferred. + Previous experience working on the Georgia Power system highly preferred. + Leadership experience preferred. + Must demonstrate skills, knowledge, and ability by successfully completing the company's pre-employment New Journeyman Evaluation will be required. + Familiar with work involving energized conductors required. + Construction and maintenance line work is desirable. + Familiar with heavy equipment directly related to line work skill sets. Knowledge, Skills and Abilities + Basic mechanical aptitude. + Knowledge of hand tools. + Experience using hydraulic and battery tools. + Previous experience with material handling bucket trucks. + Knowledge of when and how to apply proper cover-up in energized situations. + Proficient climber up to 60 feet. + Knowledge of circuit protection. + Ability to take instructions, directions and translate into actions. + Familiar with industry standard safe work practices. + Pre-employment testing may be required depending on level of related work experience. + Ability to quickly learn the Georgia Power work practices and work rules Other Requirements + Must be available for scheduled or emergency call out which could include evenings, weekends and holidays. + Must be available to travel outside of the state for storm restoration as needed. + Currently holds a valid driver's license and "Class A" CDL is required. + Currently meets a maximum weight of 270 lbs. fully clothed (includes hard hat and work boots) due to weight-restricted aerial devices required. + Customer oriented, team player, willing to learn new skills, motivated, resourceful, excellent driving skills, proactive, performs work following safety standards and procedures. + Candidates are responsible for all expenses related to traveling for testing, interview(s), etc. related to pre-employment requirements. + A thorough background check and DOT drug screen will be conducted prior to employment (after a job offer is extended). In addition, you must successfully meet requirements for a Pre-Employment (DOT) physical exam approved by our company physician. This position has been identified as a role that will require the use of a Georgia Power fleet vehicle. The following will be required if you are selected for this position: + Must have at least one year of verifiable driving experience (Must hold a valid driver's license for the class vehicle to be operated. Driving permits are not typically considered a valid driver's license). + Must have no revocation of driving privileges within the 36 months prior to application, no convictions of major traffic violations (DUI, hit and run, reckless driving, etc.) within the 12 months prior to application, or any pending charges for a major traffic violation at the time of application. + Must consent to a continuous monitoring of your Motor Vehicle Record Georgia Power Company has classified this position as "Safety Sensitive" and as such is subject to relevant pre-employment screening(s) to determine fitness for duty. Any offer of employment is contingent upon the applicant successfully completing all required fitness assessments. All candidates must apply directly online for this position in order to be reviewed and further considered. This includes 1) setting up a profile (contact phone # and email required), 2) attaching or typing a resume AND 3) answering the job-related questions (skills/background/experience) is required. Hardcopies of resumes/applications will not be accepted in our local business offices. **Georgia Power** is the largest electric subsidiary of Southern Company (NYSE: SO), America's premier energy company. Value, Reliability, Customer Service and Stewardship are the cornerstones of the Company's promise to 2.6 million customers in all but four of Georgia's 159 counties. Committed to delivering clean, safe, reliable, and affordable energy at rates below the national average, Georgia Power maintains a diverse, innovative generation mix that includes nuclear, coal and natural gas, as well as renewables such as solar, hydroelectric and wind. Georgia Power focuses on delivering world-class service to its customers every day and the Company is recognized by J.D. Power and Associates as an industry leader in customer satisfaction. For more information, visit ******************* and connect with the Company on Facebook (Facebook.com/GeorgiaPower), Twitter (Twitter.com/GeorgiaPower) and Instagram (Instagram.com/ga_power). Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 16594 Job Category: Power Line Operations & Maintenance Job Schedule: Full time Company: Georgia Power
    $49.6 hourly 5d ago
  • Job icon imageJob icon image 2

    Looking for a job?

    Let Zippia find it for you.

  • Industrial Electrician

    Flooring From Armstrong Flooring

    Electrician technician job in Macon, GA

    What does it mean to work at Armstrong? It means being immersed in a supportive culture that recognizes you as a key player in Armstrong's future. We are a large company with a local feel, where you will get to know and collaborate with leadership and your colleagues across the company. By joining us, you'll have the opportunity to make the most of your potential. Alongside a competitive remuneration package, you will receive: A benefits package including: medical, dental, prescription drug, life insurance, 401k match, long-term disability coverage, vacation and sick time, and many more. Personal development to grow your career with us based on your strengths and interests. A working culture that balances individual achievement with teamwork and collaboration. We draw on each other's strengths and allow for different work styles to build engagement and satisfaction to deliver results. $37.92/hour Four (4) years of industrial experience are required. Job Duties: Perform preventive and predictive electrical maintenance, electrical apparatus repairs, and installations by using hand and powered tools used to assemble, test, and install electrical panels and conduit, and precision instruments such as VOM and amp meters. Demonstrate ability to effectively use test equipment to perform preventive and predictive inspections in order to prevent downtime. Perform inspections at scheduled intervals, record and keep the test data in an orderly manner, and initiate work orders for remedial repairs. Recommend equipment for replacement in order to improve machine running time. Diagnose electrical and instrumentation problems and determine the best method of repair. Change out of faulty components and fabricate new parts as required. Overhaul motors, motor control panels, and other electrical equipment. Repair/replace electrical and electronic components in equipment as needed. Be familiar with and perform all work to the latest NEC and local building code standards. Assist with the procedures to keep wiring diagrams accurate and up to date. Work from wiring diagrams, sketches, written specifications and verbal instructions to implement installation and troubleshoot problems. Work closely with production supervision to prevent equipment breakdowns, and in scheduling repairs. Provide direction to production and/or other maintenance personnel assigned to assist with remedial repairs and inspections. Work with limited supervision. Maintain clean and safe working area. Observe safety precautions and plant regulations in order to prevent injury to self and others or damage to equipment and materials. Know and observe published safety rules and department procedures to obtain and use motorized vehicles. Perform other duties as requested or required. Supervised by the Maintenance Department Supervisor. Why should you join Armstrong World Industries? Armstrong World Industries (AWI) is a leader in the design and manufacture of innovative commercial and residential ceiling, wall and suspension system solutions in the Americas. With approximately $1.3B in revenue, AWI has about 3,600 employees and a manufacturing network of twenty-one facilities in North America. At home, at work, in healthcare facilities, classrooms, stores, or restaurants, we offer interior solutions that help to enhance comfort, save time, improve building efficiency and overall performance, and create beautiful spaces. For more than 160 years, we have built our business on trust and integrity. It set us apart then, and it sets us apart now, along with our ability to collaborate with and innovate for the people we're here to serve - our customers, our shareholders, our communities and our employees. We are committed to developing new and sustainable ceiling solutions, with design and performance possibilities that make a positive difference in spaces where we live, work, learn, heal and play. It's an exciting, rewarding business to be in, and we're committed to continue to grow and prosper for the benefit of all of our stakeholders. We hope you join us. Our Sustainability Ambition "Bringing our Purpose to Life" - lead a transformation in the design and building of spaces fit for today and tomorrow. We are committed to: Engaging a diverse, purpose-driven workforce; Transforming buildings from structures that shelter into structures that serve and preserve the health and well-being of people and planet; Pursuing sustainable, innovative solutions for spaces where we live, work, learn heal and play; Being a catalyst for change with all of our stakeholders; and Making a positive difference in the environments and communities we impact. About the location (Macon GA) Our Macon Plant, one of twenty Armstrong plants in North America, employs over 400 people working on rotating shifts, 24/7, in the manufacture and shipment of acoustical ceiling tile to Armstrong's customers. Located approximately 85 miles south of Atlanta, the Macon facility has 33 acres under one roof, or 1.5 million square feet of floor space. It is the largest ceiling tile factory in the world. The operations are complex, automated, use the latest modern management technology, and manufacture a wide range of commercial and residential ceiling products. Macon, also known as the "Cherry Blossom Capital of the World", is in the heart of Georgia and marks a historical crossroads in the south. The city carries with it a rich cultural heritage while creating a strong vision for the future. Macon offers the amenities of a small friendly city with the advantages of a growing community. Armstrong is committed to engaging a diverse, purpose-driven workforce. As part of our dedication to diversity, AWI is committed to Equal Employment Opportunity and all qualified applicants receive consideration for employment without regard for race, sex, color, national origin, ethnicity, gender, protected veteran status, disability, sexual orientation, gender identity, or religion. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at by email at AWI talent acquisition and let us know the nature of your request and your contact information. Requests for accommodation will be evaluated on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. Come and build your future with us and apply today!
    $37.9 hourly 60d+ ago
  • Industrial Electrician

    Vulcanmat

    Electrician technician job in Macon, GA

    Industrial Electrician - 2600001Z Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Repair and Maintain Electronic Equipment. Service, repair, calibrate, regulate, fine-tune, and test machines, devices, electrical systems, conductors, and associated equipment at aggregate, asphalt, ready-mix concrete, ship, and rail unloading systems. Troubleshoot and Diagnose Equipment. Detect and diagnose all electrical wiring, appliance, fixture, and machinery problems, failing components, and malfunctions while making corrections and striving to improve equipment reliability. Inspect Equipment, Structures, and Materials. Complete scheduled checks of all electrical equipment and systems in order to detect any malfunctions and unsafe conditions throughout the plant. Interpret Blueprints, Schematics, and other Documentation. Work with blueprints, schematics, manuals, and other specifications to determine safe and effective installation procedures. Additional Responsibilities. Other duties as assigned. Qualifications Skills You'll Need: Experience. 3-5 years of experience in construction or industrial electrical work is preferred. CDL is a plus. Knowledge of Best Practices. Must demonstrate a strong knowledge of electrical codes and electrical theory. Motor control is preferred (NEC, NESC, & MSHA). Flexibility. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Must be willing to work overtime and extended hours depending on customer and company demands. Mechanical Skills. Must have some knowledge of electrical tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERSVulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters. Job: Operations Primary Location: Georgia-Macon Organization: GM - SOUTH GA Schedule: Full-time Job Posting: Jan 14, 2026, 9:09:32 PM
    $46k-64k yearly est. Auto-Apply 10h ago
  • Industrial Electrician

    Vulcan Materials Company 4.7company rating

    Electrician technician job in Macon, GA

    Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Repair and Maintain Electronic Equipment. Service, repair, calibrate, regulate, fine-tune, and test machines, devices, electrical systems, conductors, and associated equipment at aggregate, asphalt, ready-mix concrete, ship, and rail unloading systems. Troubleshoot and Diagnose Equipment. Detect and diagnose all electrical wiring, appliance, fixture, and machinery problems, failing components, and malfunctions while making corrections and striving to improve equipment reliability. Inspect Equipment, Structures, and Materials. Complete scheduled checks of all electrical equipment and systems in order to detect any malfunctions and unsafe conditions throughout the plant. Interpret Blueprints, Schematics, and other Documentation. Work with blueprints, schematics, manuals, and other specifications to determine safe and effective installation procedures. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. 3-5 years of experience in construction or industrial electrical work is preferred. CDL is a plus. Knowledge of Best Practices. Must demonstrate a strong knowledge of electrical codes and electrical theory. Motor control is preferred (NEC, NESC, & MSHA). Flexibility. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Must be willing to work overtime and extended hours depending on customer and company demands. Mechanical Skills. Must have some knowledge of electrical tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERSVulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.
    $50k-61k yearly est. 12d ago
  • SCA Elec Tech Maintenance 3 (SkillBridge)

    Northrop Grumman 4.7company rating

    Electrician technician job in Warner Robins, GA

    At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. As one of the largest global security companies in the world, Northrop Grumman is proud to help our nation's military personnel make the transition to civilian careers. Approximately 1/4th of Northrop Grumman's 90,000 employees self-identifies as veterans, and more than 1,600 are reservists. The Northrop Grumman Military Internship Program (NG-MIP) is an approved SkillBridge Program under Dept. of Defense Instruction 1322.29. The NG-MIP program is an opportunity for transitioning service members to gain valuable civilian work experience through an individual internship during their last **6 months of service** , for up to **180 days** . The Northrop Grumman Military Internship Program is open to all ranks and experience levels. SkillBridge participants are **not eligible for compensation** from Northrop Grumman, as they continue to receive military compensation and benefits as **Active-duty service members** . Responsibilities for this internship position are: Northrop Grumman Corporation (NGC) has developed the Northrop Grumman - Military Internship Program (DoD SkillBridge) utilizing the DoDI guidance for Skillbridge. During this program the service member will be on-site at his or her host company performing an individual internship in an entry to mid-level career type role. The service member will be on the job training supporting a work schedule equivalent to 40hrs per week. Outlined below are the Goals, Objectives, and Outcomes for the program. _ _ _Goals - Provide transitioning service members fellowship-style job skills training during the last_ _portion_ _(s) of their military commitment. This program is specifically designed to offer internships that result in the potential to transition to a full-time opportunity as the conclusion of the training. Interns will serve as a pipeline for high-speed, motivated military candidates into NGC._ _Objectives - Service Members who complete the Intern program will be highly trained, capable, future employees that align to the specific needs of the organization and are prepared to meet the NG mission "Defining Possible" on Day 1. This program provides a comprehensive internship experience including professional development, networking with leadership, and training specifically focused on NG leadership principles, company history, customer/stakeholder engagement, product and service overview, and core job responsibilities._ _Outcome - Offer transitioning service member a rewarding opportunity to join the Northrop Grumman team._ **DoD SkillBridge Eligibility:** - Has served at least 180 days on active duty - Is within 12 months of separation or retirement - Will receive an honorable discharge - Has taken any service TAPS/TGPS - Has attended or participated in an ethics brief within the last 12 months - Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of internship. Put your skills to the test by pushing the boundaries of what's possible. From global defense to sustainment and modernization to mission readiness, your experience and ability will make it a reality. Our programs are built on equal parts of curiosity and collaboration. Our combined effort means our customers can connect and defend millions of people around the world. With Northrop Grumman, you'll have the opportunity to be an essential part of projects that will define your career, now and in the future. We are currently seeking an SCA Electronics Maintenance Technician 3 to join our growing team in Warner Robins, Georgia. **Responsibilities** : - Applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents, such as: - Determining the location and density of circuitry - Evaluating electromagnetic radiation - Isolating malfunctions to component level - Incorporating engineering - Exercises independent judgment in performing such tasks as: - Making circuit analyses - Calculating wave forms - Tracing relationships in signal flow - Uses complex test instruments such as: - High frequency pulse generators - Frequency synthesizers - Distortion analyzers - Complex computer control equipment - Work may be reviewed by supervisor for general compliance with accepted practices - May provide technical guidance to lower level technicians **Basic Qualifications:** - Must have an Associate's degree or appropriate Military Occupational Specialty in electronics repair (or related field) with a minimum of 6 years of electronics / electrical repair experience - Will also consider 8 years of direct electronics / electrical repair experience with HS Diploma/GED. - Must have an interim or active U.S. Department of Defense (DoD) Secret security clearance, or an inactive clearance (last active within the past 2 years) - Must be able to work any shift - Must be able to work on-site in Warner Robins, Georgia - Meets DoD SkillBridge qualifications as per DODI 1322.29 **Preferred Qualifications:** - Work experience in manufacturing automated test equipment - An in-depth understanding of the interrelationships of circuits NGSkills \#MPR Primary Level Salary Range: $28.73 - $28.73 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
    $28.7-28.7 hourly 60d+ ago
  • Industrial Electrician (High Voltage)

    The Rogers Company 4.8company rating

    Electrician technician job in Butler, GA

    Rogers Group, Inc., headquartered in Nashville, is a privately held aggregate and asphalt highway construction company operating and meeting customer needs in 12 states with over 3,000 employees. RGI, established in 1908, has the distinction of being recognized as the largest privately held aggregate producer in the United States. We have 86 quarries and 56 asphalt plants across Tennessee, Mississippi, Georgia, Alabama, South Carolina, North Carolina, Kentucky, Arkansas, Texas, Indiana, Illinois, and Ohio. Rogers Group Inc. is currently seeking an Experienced Industrial Electrician in Butler, Georgia / Butler Georgia operations area, Georgia SMA, reporting to the Plant Manager. The successful candidate will have a demonstrated ability to lead safety, quality, and revenue generation throughout our existing operations and additional operations through growth. Job Details: Wage ranges from $38.00/hour+, for experienced or certified electricians - depending on experience level. This position would include a company service vehicle for business and commute purposes, no personal use. Overtime available and extensive medical and retirement benefits. Starting Wage will go up with verifiable experience. This individual will be responsible for analyzing and correcting electrical problems and will repair and overhaul electrical equipment and controls. Locations served include Butler & Howard, Georgia, Georgia Quarries. Day Shift: approximate shift times of 6a.m. - 5p.m. Full-Time Job Responsibilities: Plans details of working procedure by determining replacement needs or new material required and develops a logical approach to correct the problem. Analyzes circuits, wiring diagrams and drawings to install, repair, calibrate, service or replace electronic devices and systems. Receives wiring diagrams, specifications and instructions from supervisor covering emergencies and scheduled repairs, installation, and electrical inspection work to be performed. Performs work requiring a thorough knowledge of electrical theory and principles, statutory codes, properties of materials and principles of operation of electrical equipment. Starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with 0SHA requirements. Services electronic equipment by checking, testing, and replacing faulty components, circuits, printed circuit boards, and similar electronic devices. Installs, repairs, and maintains communication cables, power distribution cables, then splicing pieces as required. Familiarity and experience working with PLCs (Programable Logic Controllers) Experience working with High Voltage (480 volts) required Fabricates parts if not commercially available, using machine and hand tools common to the trade. Determines need for, analyzes, and makes necessary running adjustments, repairs, and overhauls. Advises and cautions operators and mechanics about potential electrical problems and inherent dangers involved. Notifies supervisor of potentially dangerous electrical equipment noted and corrective action taken. QUALIFICATIONS: Uncompromising focus on safety excellence. 1.5 years of experience as an Industrial Electrician required Able to do safety and maintenance inspections throughout the day. Capable of demonstrating equipment and troubleshooting knowledge. Ability to understand basic safety and work instruction. Must be able to work flexible hours and overtime as needed. Excellent verbal and written communications skills required. Good organizational, scheduling and time management skills. Team player mentality. Working outdoors in varied weather conditions with the probability of dust, noise, heat, and cold. Must pass pre-employment drug testing. Rogers Group provides extensive benefits, strong compensation, and a safe, drug-free working environment. As a Rogers Group employee, you will have access to our competitive company perks, including: Medical, Dental, Vision Insurance plus Health Savings Account with annual company contribution. Company provided Group Life and Accidental Death & Dismemberment insurance. Retirement 401(k) with company contribution and match at one year of service. Company provided Short- and Long-Term Disability. Paid Holiday's including Christmas shutdown between Christmas and New Years Day. Paid vacation available after 180-day probationary period and accrued based on years of service. Annual performance-based merit increases. Career growth/advancement opportunities. RGI EEO Statement It is the policy of Rogers Group, Inc. to recruit, hire, and promote individuals based on demonstrated merit and qualifications. We are committed to providing a work environment that is free from discrimination, harassment, and retaliation as protected by applicable federal, state, or local laws. All applications are accepted online at ***********************
    $38 hourly Auto-Apply 60d+ ago
  • Commercial Electrical Technician

    Firstcall Mechanical Group

    Electrician technician job in Macon, GA

    A FirstCall Mechanical Company COMMERCIAL ELECTRICAL TECHNICIAN WHO IS FIRSTCALL MECHANICAL? Starr Electrical Contractors is a commercial and industrial Electrical services provider in the Macon metro area. Founded in 1947, Starr Electrcial Contractors partnered with FirstCall Mechanical in 2024. FirstCall Mechanical is a leading provider of commercial and industrial HVAC, building controls, electrical, and plumbing services. FirstCall serves a wide array of facility and customer types, including distribution centers, industrial plants, universities, airports, healthcare facilities, self-storage units, and more. With approximately 700 employees across Ohio, New York, Virginia, Tennessee, North Carolina, South Carolina, Georgia, Florida, and Texas, FirstCall is committed to building durable partnerships. The company is actively expanding its operations nationwide and partnering with organizations that share its dedication to quality and customer satisfaction. FirstCall Mechanical not only partners with companies to nurture growth in the market, but also provides equal focus on employee growth and development as well. We believe when YOU succeed, we all succeed, so we strive to be the first call for talented team members who want a career, not just a job. BENEFITS OVERVIEW FirstCall Mechanical values our employees' well-being, growth, and success! Employees are offered a robust benefits package, including: Competitive Weekly Pay Comprehensive Healthcare Coverage - Medical, Dental, Vision, Free Telehealth + More Financial Resources - 401(k) Retirement Savings Plan with a 5% match, Life Insurance, Short & Long-Term Disability Time-Off & Holidays - Up to 4 weeks of Paid Off, 9 Paid Holidays + Veterans Day for Veterans Career Growth & Development- Company-sponsored education and career advancement programs like the FirstCall Academy, the Learning & Education Assistance Program (LEAP), and the FirstCall Progression Program Generous Referral Bonus of $2,500 per referral Role-Specific Perks - Company vehicle or allowance, mobile phone or phone allowance, uniforms, and work boot and pants allowances POSITION OVERVIEW The Electrical Technician is responsible for performing intermediate-to-advanced level electrical tasks with minimal supervision. This role requires a solid working knowledge of electrical systems, strong troubleshooting skills, and the ability to work independently or as part of a team on installation, maintenance, and repair projects. JOB RESPONSIBILITIES Install, troubleshoot, and repair electrical systems including panels, circuits, switches, outlets, and lighting in accordance with NEC and local codes Read and interpret blueprints, schematics, and technical diagrams to execute electrical work accurately Perform preventive maintenance and diagnostic testing on electrical equipment using appropriate tools and meters Work independently or under the supervision of a journeyman or foreman to complete tasks efficiently and accurately Ensure compliance with all safety regulations and company procedures, including proper use of PPE and lockout/tagout protocols Identify material needs, pull wire, bend conduit, and make proper terminations. Provide mentorship and guidance to Electrical Technician I team members or helpers as needed Maintain accurate records of work performed, time spent, and materials used ACCOUNTABILITIES Complete assigned installations, diagnostics, and repairs accurately, meeting safety and performance standards Follow all safety procedures and wear required personal protective equipment (PPE) to minimize risk and maintain a safe job site Collaborate with journeymen, foremen, and peers to ensure smooth workflow and effective communication on job sites ORGANIZATIONAL ALIGNMENT This position reports to the local Branch Manager and is responsible for engaging with the install team and all of our customers. Qualifications QUALIFICATIONS High school diploma or GED required. 3-5 years of hands-on experience in electrical installation, service, or maintenance roles. Working knowledge of the National Electrical Code (NEC) and local building codes. Proficiency in reading electrical drawings, blueprints, and schematics Skilled in using electrical tools and testing equipment such as multimeters, ammeters, megohmmeters, and conduit benders Ability to work independently with minimal supervision and take initiative on job sites OSHA 10 or 30 certification preferred, or willing to obtain once hired Valid driver's license and reliable transportation Must pass background check and drug screening BEHAVIORAL PROFILE Language Skills Ability to clearly read and understand work orders, safety documentation, and technical diagrams. Can communicate effectively in one-on-one and small group settings with team members, supervisors, and clients. Mathematical Skills Ability to accurately calculate electrical loads, material measurements, and voltage/amperage. Proficient in applying math to troubleshoot and complete electrical tasks. Reasoning Ability Strong critical thinking skills to diagnose electrical issues, plan installations, and follow complex procedures. Capable of prioritizing tasks, working independently, and solving problems efficiently. Physical Demands Regularly required to stand, walk, bend, climb ladders, and use tools with precision. Must be able to lift 50 pounds and perform physically demanding tasks in a variety of environments and weather conditions. Requires vision abilities including close, distance, peripheral, and depth perception. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.
    $37k-59k yearly est. 9d ago
  • Industrial Electrician Helper

    Yancey Bros. Co 3.9company rating

    Electrician technician job in Griffin, GA

    Who We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As the Industrial Electrician Helper for Yancey Engineered Solutions, you will assist with electrical installs for industrial packaging on a daily basis. You will also perform all duties related to industrial packaging for backup power. Primary Responsibilities: Assist with basic electrical tasks: bend conduit, run wire, wire breaker panels, etc. Must keep all materials, tools, and equipment in an orderly fashion, maintain a clean work area at all times, demonstrate safe work habits and exhibit proper care of all tools and equipment. Additional Responsibilities: Participate in required safety program and work in a safe manner. Additional duties as assigned by manager. Who We Are Looking For: To be successful in this position you should have proven experience as an electrician and hold a valid state electrician's license. You should possess a strong sense of urgency and desire to provide superior customer service. The ability to take direction and work in a team environment is essential to this position as well. Education/Experience: High school diploma or equivalent. Relevant certifications from a technical college preferred. Must have 3-years minimum experience as a commercial industrial or residential electrical apprentice / journeyman. Required Qualifications/Skills: Working knowledge of basic electrical installation. Willingness to learn basic electrical tasks. Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: Safety: We value the lives and health of our team and customers above all else. Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly. Teamwork: We work as one across our organization for the benefit of our customers. Excellence: We strive to be the best, continuously improving our customers' experience and the solutions we provide. Sense of Urgency: We respond quickly to customer needs and hold ourselves accountable for results. Ideal candidates will demonstrate the following values: Acting in a safe manner Exhibiting honesty and integrity Acting in a fair and ethical manner Team mentality Delivering quality results Embraces change / improvement Exhibiting superior customer service skills Exhibiting pride and ownership Working with a sense of urgency Exhibiting a winning attitude What We Offer: Yancey Bros Co offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure Compensation: Competitive Pay Individual Bonus Opportunities Available Technician Tool Allowance 401k Plan Strong Company Match Employee Profit Sharing Financial Wellness Coaching Employee Wellness Program Medical, Vision, Dental Insurance Prescription Drug Coverage Flexible Spending Accounts Short & Long Term Disability Group Life Insurance Personal Time Off Paid Holidays Paid Sick Leave Career Development Tuition Reimbursement Ongoing Training Advancement Opportunities
    $45k-61k yearly est. 60d+ ago
  • Medical Equipment Technician

    Patients Choice LLC

    Electrician technician job in Macon, GA

    DME - Durable Medical Equipment - Service/Delivery Technician: Patients Choice Medical LLC provides the Macon, GA Market's aging population with mobility products with an expertise in Complex Rehab Power and Complex Manual Wheel Chairs. (DME - Durable Medial Equipment experience is a PLUS!) Our company is growing and we are looking for an individual to perform the duties of a Field Technician for the Macon, GA area. Your training will start in the warehouse and progress to the mastery of some of the most advanced power mobility products available. Requirements: ▪Follow and adhere to all instructions given by Administration. ▪Complete job assignments in a timely manner with little or no supervision. ▪Work safely with hand tools and power equipment as required for assignments and understand the proper use of equipment. ▪Familiarity with electric motors a plus along with initiative for troubleshooting. (ability to work tech service and basic schematics. ▪ Competant computer skills and basic knowledge of MS office software. ▪Must be professional, punctual, reliable and clean cut. Able to speak well and comfortable interacting with the elderly. ▪Receive, un-crate, assemble and dispose of crate material according to safety standards. ▪ Notify administration of any discrepancies in equipment or documentation prior to delivering to patient. ▪Verifiable employment references. --Clean driving record / valid drivers license Compensation: ▪Pay is based on experience ▪Paid Holidays ▪2 weeks a year paid vacation. ▪ Health/Dental/Vision/Flex Spending ▪401k availability
    $30k-43k yearly est. 60d+ ago
  • Experienced Maintenance Mechanic

    Frito-Lay 4.3company rating

    Electrician technician job in Warner Robins, GA

    This is a full-time experienced Maintenance Mechanic position that is responsible for troubleshooting, repairing, and installing pneumatic and hydraulic systems, control valves, centrifugal and positive displacement pumps. Maintenance Mechanics are also responsible for troubleshooting and repairing AC/DC electrical systems, reading schematics, and using electrical testing equipment (Volt-Ohm meter, amp meter, oscilloscope). Our experienced Maintenance Mechanics have extensive understanding of Programmable Logic Controls and contribute a unique skillset through the use of preventative maintenance systems and work order tracking. Maintenance Mechanics have the skill and flexibility to work on any equipment within the facility and to operate lathes, mills, arc and Heliarc welders for repair, and fabrication. If you do not have extensive experience, you may be better suited for one of our entry-level position. If so, we encourage you to search for the position that best fits your current skillset. Prior to to the in-person interview, you will be asking to complete a hands-on electrical skills test. Although you will start out working for Frito-Lay, this job can open the door to career opportunities with our parent company, PepsiCo. We set industry standards in terms of pay and benefits. We also offer unbeatable benefits including health insurance, dental and vision, retirement saving benefits including a 401(k) with company contribution, vacation days and much more. Work will vary from day to day depending on need and your hours will vary by assigned location. It also gets loud and the Frito-Lay manufacturing facilities are large. While we want everyone to feel comfortable, our ability to control the temperature in our warehouses is limited. Indoor warehouse working conditions are impacted by seasons and the weather. Before going any further, you should know that our Maintenance team is known for two critical areas of expertise: * Deep understanding of high-voltage wiring (480V 3-phase motors) * Multi-craft maintenance and repair (e.g. performing interrelated repairs on electrical systems and mechanical systems) Are you comfortable, competent, and capable with high-voltage wiring and multi-craft repair? If you answered yes, our team would welcome your contributions to our daily operations. We asked our Maintenance Mechanics what we should tell you about your work day, and this is what they had to say: * You will use your extensive knowledge to assist entry-level mechanics with difficult repairs * You are willing to work under pressure to fix equipment * You will work urgently to get the equipment back up and running * You will be troubleshooting issues on a wide variety of equipment * You will conduct repair failures of production and facilities equipment * You will ensure maximum equipment efficiency, effectiveness, and reliability * Responding to maintenance calls is part of your job, and this can sometimes mean helping complete a repair that has already been started * You will inspect machines, develop repair lists and identify short-term and long-term repairs so that machines run correctly * You will work from task lists when diagnosing machines and taking corrective actions Professional insight and knowledge of the operation of our equipment will enable you to understand problems and take action to resolve issues. Do you have an electrical certification, maintenance manufacturing experience, technical school training, or welding experience? If so, you are likely well-equipped to join the team. We have a robust training program that can benefit you provided that you have a proven base knowledge of mechanical maintenance repair (especially with regard to electrical repair multi-craft repairs). Although its not required, many managers prefer that candidates have at least two years training experience in mechanical/electrical repair in a manufacturing environment. Please be sure that you meet the following minimum requirements for this position: * You are at least 18 years of age or older * You will be required to work on weekends and holidays * Ability to lift 15 to 50 pounds with or without a reasonable accommodation * You are able to stand and walk for extended periods of time with or without a reasonable accommodation * You are able to climb, bend, reach, stoop, kneel, and stretch for extended periods with or without a reasonable accommodation * You are willing and able to work in an environment that has extreme temperatures, humidity, hazardous/loud equipment, and slippery surfaces Mechanics who are considering applying often ask us what characteristics our leadership looks for in this important position. This should give you an idea of what managers are seeking: * Customer Service: given our emphasis on mechanical aptitude, you might be surprised to see customer service listed here, but remember we interact with all levels of team members on the floor. It is important that you, and we as a team, treat all team members with the same level of service as we would our consumers. * Flexibility: you'll be switching gears, shifting priorities, and balancing task lists with calls for maintenance repairs. Flexibility - and keeping your cool - will allow you to both focus and prioritize your work. * Self-Starter: you will often find yourself working unsupervised, so taking ownership of your quality and speed of work is essential when conducting preventative maintenance or addressing equipment failure. * Safety Focused: your attention to company policies and procedures regarding safety will minimize risks to yourself, your team, and the quality of our products. Safety is everyone's job at Frito-Lay. We hope you can imagine yourself on the team. Does this sound like you? There will be tough days. When we experience downtime, we are working under pressure to fix equipment. We take it in stride because we believe, and our Maintenance Mechanics agree, that the rewards are worth it. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. References Visible links 1. ********************************************************************************** 2. *******************************************************************************************
    $48k-72k yearly est. 5d ago
  • Pool Maintenance Technician

    MacOn 3.8company rating

    Electrician technician job in Macon, GA

    ASP - America's Swimming Pool Company is America's premier swimming pool service company. We have been operating for over 15 years with an outstanding reputation. We pride ourselves on providing "resort quality pool services". To do this we have built a team of dedicated, enthusiastic technicians who enjoy delivering resort-quality service and treating our customers with the utmost respect. Our Mission: At ASP, we create superior value for our customers in all that we do by leveraging technology, higher standards, knowledge and the relentless pursuit of excellence. Because of our approach, we have earned loyal customers who expect and desire dependable, quality swimming pool solutions. We guarantee satisfaction with our services and do not require long-term contracts. We are fully licensed and insured and our team members are among the best in the swimming pool service industry. We continue to grow and are seeking a solution-oriented and customer-focused Pool Maintenance Technician to join our team. This position is responsible to provide excellent on-site pool cleaning and pool maintenance services to each and every customer they are assigned. This includes following our proven pool cleaning methods, handling pool chemicals in a controlled and safe manner, following all established protocols and sharing lessons learned with the rest of our team. The ideal person for this position will love to work outdoors. They will be a self starter who has the ability to work independently with minimal oversight and guidance. They will handle all matters with integrity and embrace the concept and requirements of delivering "resort-quality service". Responsibilities: Success in this position will be determined by the following measurable results: Manage a swimming pool route that includes the cleaning of swimming pools each week. The ability to manage a stocking of chemicals on the truck and properly adjust the water chemistry for each pool each week. The ability to utilize a smart phone for our Pool Ops mobile platform. The ability to spot equipment repair needs and communicate those needs to the office. We are specifically looking for an individual who demonstrates these behaviors consistent with the ASP way of doing business (our culture and values): Acting with Integrity; Superior Knowledge; Passion for the Company; Customer Focus; Accountability and Discipline; Respecting Others; Excellence in ALL we do; and Safety First at all Times. Requirements: Requirements for this position are that you have: (1) a valid driver's license with a clean driving record; (2) no felony convictions (must pass a criminal background check); and (3) the ability to lift up to 100 lbs. No other specific experience is required as we will teach you the ASP methods designed to give our customers a great looking pool and to maximize your earning potential; however, a high school degree and Certified Pool Operator License is preferred. Benefits: You will receive paid vacation time following a qualifying period. Next Steps: If you are interested in being considered for this position and joining our award-winning team, then we would encourage you to apply for this position. We look forward to learning more about you as you go through our hiring process. Compensation: $32,000 - Compensation based on experience ASP is the nation's largest and most trusted swimming pool cleaning franchise system with 257 locations across 20 states. Each location is independently owned and operated by a small business owner. Our locations experienced professionals service over 420,000,000 gallons of water each week- always with reliable, friendly service and a flat, affordable rate. A Leader in the Swimming Pool Service Industry ASP was founded by Stewart Vernon in 2002, and he still leads the franchisor today. He drives the company's vision of increasing efficiency and lowering prices with a proven system and technological advances which each location employs. For example, ASP's proprietary software platform, Pool Ops , automatically emails our clients a weekly digital report after each visit that includes the time of service, services performed, chemical balance, chemicals added, and a picture of the clean swimming pool. Follow @lifeat ASP to see what life is like working with an ASP team! #LifeatASP This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchisee, and not to America's Swimming Pool Corporate.
    $32k yearly Auto-Apply 60d+ ago
  • Electromechanical Technician

    Continental Tire The Americas, LLC 4.8company rating

    Electrician technician job in Barnesville, GA

    **THE COMPANY** Continental Tire the Americas, LLC Continental Tire has been around for 150 years, we've been changing the way the world moves while making it more safe, smart, sustainable, and accessible to all. Our Barnesville, GA location is seeking a highly skilled electromechanical technician. The ideal candidate has excellent communication skills, is a self-starter, dependable and accountable. Are you ready to shape the future with us? Essential Functions: + Work in the maintenance department to keep equipment running efficiently and implement improvements to different machinery in the textile industry. + Troubleshoot / maintain plant production equipment including programs, and communications. + Troubleshoot, repair, and program DC drives, motors and equipment. + Troubleshoot, repair AC motors, controls and associated equipment. + Troubleshoot, repair, and program variable frequency drives (VFD) and associated equipment. + Troubleshoot / program PLC's (Allen Bradley, Siemens, etc.) and operator interface equipment. + Maintain plant power distribution systems. + Maintain plant utility equipment (HVAC, air compressors, RTO, etc.) + Electrical and mechanical installation of new equipment. + Other duties as assigned. **Qualifications** **WHAT YOU BRING TO THE ROLE** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. + Continental is not able to pay relocation expenses for this opportunity. + Candidate should be able to read and understand electrical schematics. + Candidate should be able to read and understand ladder logic diagrams. + Candidate should be able to perform duties of an Electrical Technician AND be able to diagnose, repair and program PLC's, drives and basic knowledge of IT systems, etc. + Candidate should have a good understanding of IT interfaces, and PLC's communications. + Elemental understanding of Automation. + Microsoft Office knowledge All your information will be kept confidential according to EEO guidelines. **EEO-Statement:** EEO / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals, without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. In addition, as a federal contractor, Continental complies with government regulations, including affirmative action responsibilities for qualified individuals with a disability and protected veterans, where they apply. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Further, Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to ******************** or contact US Recruiting at ************. This telephone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application, if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a call back. Ready to drive with Continental? Take the first step and fill in the online application.
    $46k-55k yearly est. 60d+ ago
  • Maintenance Mechanic

    Houston Hospitals 4.1company rating

    Electrician technician job in Warner Robins, GA

    Work Shift: Day - 8 Hour (United States of America) Under general supervision, performs the necessary duties to maintain the plant operation systems. Responsibilities include analyzing existing programs to detect areas of improvement and operation and maintenance of boiler and HVAC systems. The Maintenance Mechanic II performs a variety of duties relating to the maintenance and upkeep of facilities and grounds. Included in these duties are accomplishing electrical repairs and troubleshooting; making small plumbing repairs; doing basic carpentry; and maintaining maintenance vehicles. Responsible to the Facilities Manager and will perform any and all other duties assigned. Qualifications: A. Education & Training: High School graduate or GED equivalent. B. Experience: Three (3) years experience in a healthcare facility and/or building maintenance (or related); or any equivalent combination of education, training, and experience which provides the necessary knowledge, skills, and abilities for this position C. Required Certification/Registration/Licensure: Valid Georgia driver's license. Acceptable MVR history to meet and maintain insurance requirements must be met in order to drive HHC vehicles. CPT training within 9 months of hire. D. Knowledge, Skills & Abilities: Utilizes a variety of equipment to include grinder, drill press, pressure washer, generator, band saw, power and hand tools, hospital vehicles, and some medical equipment Emory is an equal opportunity employer, and qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law. Emory Healthcare is committed to providing reasonable accommodations to qualified individuals with disabilities upon request. Please contact Emory Healthcare's Human Resources at ***************************. Please note that one week's advance notice is preferred. Scheduled Weekly Hours: 40 FTE: 1 Expanded Work Shift: On Call:
    $40k-57k yearly est. Auto-Apply 39d ago
  • Maintenance Technician (Overnight Shift)

    Jack Link's Protein Snacks 4.5company rating

    Electrician technician job in Perry, GA

    When it comes to being wild, we know a thing or two. We're not afraid of trying something new or the hard work it takes to make it happen. It's in our DNA. We've turned a family recipe into a new snacking category. And the wilderness into the world's largest meat snack business, that's still proudly family owned and operated. We're a company built by innovators, and are driven to not only satisfy your hunger, but to also feed your journey - whether that journey is on the road, on the run, at the campground, at the playground, in the office or in the moment. It's a journey we share with you. It's the journey forward of our people, of our communities, of our category…with a reverence for quality and an irreverence for the status quo. At Jack Link's Protein Snacks, we see every moment of every day as an opportunity to move forward, to forge new ground. To realize our vision of becoming the World's #1 Protein Snack Company. We never give up. You never give up. Together, we keep going. Are you wild enough to join us? Jack Link's Protein Snacks is a global leader in snacking and the No. 1 meat snack manufacturer worldwide. Family-owned and operated with headquarters in Minong, Wisconsin, Jack Link's Protein Snacks also has a large corporate hub in Downtown Minneapolis, Minnesota. The company is made up of over 4,000 passionate team members, across 11 countries, who share an uncompromising commitment to delivering awesome products and feeding the journey of those who move things forward. The Jack Link's Protein Snacks portfolio of brands includes, Jack Link's, Lorissa's Kitchen, BiFi, Peperami, Wild River, Golden Island and Country Fresh Meats. JOB DESCRIPTION SUMMARY The Maintenance Technician's job is to keep the plant and equipment running in a safe and efficient manner. Maintains and repairs building and equipment. Carries out responsibilities in accordance with company policies and procedures. Pay : The starting rate for this role is $23.31 - $43.01(Hourly) DUTIES AND RESPONSIBILITIES The duties and responsibilities of this position shall consist of, but not be limited to, the following: Daily work: Inspect machines regularly for signs of malfunctions, including visual inspections, listening for irregular noises and conducting scheduled testing as appropriate. Perform routine preventative maintenance and service for each piece of equipment, complete daily Work Order documentation and enter into CMMS system. Collaboration with site managers to assess ongoing needs and plan preventative maintenance schedules. Routine inspection of tools and maintenance equipment. Use a variety of power and hand tools to perform job functions. Install, assemble and test new machines and equipment. Troubleshooting: Monitor, identify and respond promptly to signs of malfunction in machinery such as changes in performance, temperature fluctuations, sounds, smells or atypical energy usage; perform troubleshooting for production machinery. Perform emergency repairs on various types of machinery, including mechanical, electric and hydraulic; identify and replace worn or damaged parts in a timely manner. Diagnosis of mechanical and electrical system issues. Diagnose and repair mechanical machinery. General: Reading, interpreting, and following instructions and operation manuals. Maintain machinery and the adjacent workplace in a state of appropriate cleanliness. Assist with inventory control. Maintain the shop, mechanical room, and the interior/exterior of the plant. Maintain a safe, clean, and organized work area. Perform all duties within OSHA and company safety standards; LOTO, wear PPE and maintain safety equipment. Ensure safety devices are installed and working properly. Follow good manufacturing practices and HACCP training, along with company SOP's, and SSOP's. Other duties as assigned. Qualifications REQUIRED EDUCATION AND EXPERIENCE Required Education: High School Diploma or equivalent. Required Experience: Knowledge of the materials, tools, methods, and techniques used in the mechanical, pneumatic, and hydraulic trades. Basic understanding of motors, and controllers, hydraulics and pneumatics, plumbing. Basic understanding of PLC I/O. Basic understanding of TCP/IP. Preferred Experience: 2 yr. technical degree and previous experience working in a meat processing facility. Robotics maintenance and troubleshooting experience. Ammonia refrigeration experience. Experience working in food manufacturing environment. CMMS experience in at least one CMMS program. English/Spanish bilingual. REQUIRED SKILLS, KNOWLEDGE, AND ABILITIES Skill in diagnosing equipment defects and making necessary repairs. Must be a team player that is committed to working in a quality environment. The ability to work independently with demonstrated ability to prioritize workload effectively. The ability to work in a fast paced and dynamic environment. Must be an agent for change and receptive to innovative ideas from others. The ability to establish and maintain harmonious working relationships with other team members and departments. The ability to deal with multiple tasks while using good judgment. The ability to perform heavy physical work, exercising up to 50 pounds of strength frequently to lift, carry, push, pull, or otherwise move objects. Work involves stooping, crouching, kneeling, reaching, standing, walking, and grasping. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by a Team Member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Team Member will be required to wear the appropriate Personal Protective Equipment (i.e beard/hairnet, ear plugs, frock, boots, etc), stand for extended periods of time, and use hands/arms to push, pull, reach and occasionally lift above head. The Team Member must occasionally lift, push, pull up to 25 pounds and 50 pounds infrequently. Team Members are requested to visually inspect equipment and/or product. WORK ENVIRONMENT The work environment characteristics described here are representative of those a Team Member encounters while performing the essential functions of this job. The work environment is a plant setting with wet/slippery floors, varying degrees of temperatures with an average temperature of 40 degrees in the production area. Team Members will be exposed to raw and/or cooked meat products and moving equipment and will be required to follow all Food Safety Quality requirements. Additional Information The starting rate for this role is $23.31 - $43.01(Hourly). Actual salaries will vary based on several factors, including but not limited to external market data, internal equity, location, and candidate skill set and experience. Base pay is just one component of Jack Link's Total Rewards package for Team Members. Other rewards may include annual incentive and program-specific awards. Jack Link's provides a variety of benefits to eligible Team Members, including medical, dental and vision benefits, life and disability insurance, 401k participation, paid holidays, and paid time off. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER: Jack Link's provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic that is protected by federal, state or local law. E-VERIFY: Jack Link's is participant in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For information about the E-Verify program, please visit: *************************************** All your information will be kept confidential according to EEO guidelines.
    $23.3-43 hourly 6d ago
  • Maintenance Technician - No Experience Necessary

    Echostar 3.9company rating

    Electrician technician job in Dublin, GA

    EchoStar is reimagining the future of connectivity. Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and products. Today, our brands include Boost Mobile, DISH TV, Gen Mobile, Hughes and Sling TV. Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world-class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience has paid off, as DISH is a six-time J.D. Power award winner for being #1 in Customer Satisfaction. Job Duties and Responsibilities What You'll Do: You'll visit customers' homes, solve problems, and introduce them to smart home tech. Install and service DISH equipment and smart home products in customers' homes Teach customers how to use their tech and offer additional services when helpful Keep a clean work area and maintain a professional attitude while working independently but staying connected with the team What's in it for You: Career Growth: Start here and grow fast! Many of our leaders began in this role, with opportunities to move into different departments for new challenges Pay Increases: Automatic promotion after 6 months with a $1/hour raise. Additional promotions with 5-10% pay increases based on performance Bonus Potential: Earn up to $6,400 your first year, and up to $9,100 annually after. High performers also receive AwardPerqs-redeemable for travel, electronics, and more Comprehensive Benefits: Paid training, time off, Medical, Dental, Vision, Life Insurance packages, HSA, 401(K) with company match, Employee Stock Purchasing Program and Tuition Reimbursement Exclusive Perks: Complimentary DISH TV ($114.99/month), discounts on Sling TV ($5/month), and Boost Mobile plans (starting at $15/month), company-provided van, tools, and uniforms Paid Training You'll Get: Clear, step-by-step guidance for installations and service Smart home tech knowledge to support and educate customers Best practices created by our most experienced techs Skills, Experience and Requirements What You'll Need: Valid Driver's License: Clean record required Schedule Flexibility: Willingness to travel as needed; flexible to work shifts that might include evenings, weekends, or holidays Physical Ability: Climb ladders (up to 40 ft) Lift up to 70 lbs Must meet and maintain 335 lb weight limit Customer Focus: Build trust and create a great experience Problem-Solving: Tackle a variety of challenges on the spot Determination: Work in tight spaces and all kinds of weather Adaptability: Handle changes and unexpected tasks with ease Benefits: From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential. The posting will be active for a minimum of 3 days. The active posting will continue to extend by 3 days until the position is filled. We pride ourselves on developing and promoting talent as an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. EchoStar will accommodate the sincerely held religious beliefs of employees if such accommodations are not undue hardships and are otherwise within the bounds of applicable law. All qualified applicants with arrest or conviction records will be considered for employment in accordance with local, state, and federal law. You may redact any information that identifies age, date of birth, or dates of school/graduation from your application documents before submission and throughout our application process. EchoStar will provide reasonable accommodation to otherwise qualified job applicants and employees with known physical or mental disabilities, unless doing so poses an undue hardship on the Company, poses a direct threat of substantial harm to others, or is otherwise not required by law. EchoStar has a more detailed Accommodation Policy that applies to employees. EchoStar endeavors to make echostar.com and jobs.echostar.com accessible to users. Please contact *************** if you would like to discuss the accessibility of our website or need assistance completing the application process. This contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications. Click the links to access the following statements: EEO Policy Statement, Pay Transparency, EEOC Know Your Rights (English/Spanish) Salary Ranges Compensation: $18.75/Hour
    $18.8 hourly 28d ago
  • Multi-craft Maintenance Technician

    Wilks Brothers 4.2company rating

    Electrician technician job in McIntyre, GA

    Company Information: Carbo Ceramics, LLC is a leading technology and service company offering innovative solutions across various industries. We develop technologies that enhance oil and gas production from previously uneconomical reserves. Website: ************** Shift Information: Swing/rotating shifts may be assigned to days or nights on rotation. Position Summary: The Multi-craft Maintenance Tech is responsible for safely installing, maintaining, and repairing production and quality equipment to achieve maximum production capability while ensuring plant reliability. Conducts all work in accordance with the CARBO Mission Statement and Core Values. Key Roles / Responsibilities: Answers calls in an efficient manner to resolve plant issues to ensure production and quality goals are met. This position performs routine lubrication and inspection of bearings, gearboxes, motors, rotating assemblies, conveyor belts, elevators, screws, valves, etc. Duties also include non-routine repairs, installation, and service on both electrical and mechanical equipment. Willing to learn all aspects of plant operation, fill in wherever needed to optimize plant efficiency. Perform other related tasks when necessary. Required Education, Experience, and Qualifications: Must be able to work 12 hour rotating shifts including nights & weekends if needed. Experience with Preventative and Reliability Maintenance including lubrication and inspection of all industrial components. Industrial electrical and mechanical skills as well as the ability to read and interpret equipment manuals, mechanical and electrical drawings/schematics. Experience in the repair and maintenance of industrial equipment. This includes but is not limited to proper lubrication practices, ability to identify defects in bearings, gearboxes, conveyors, valves, mechanical drive systems, etc. Preferred understanding of control voltage up to 480V electrical systems. Candidate should be able to assist with troubleshooting, replacement or repair of all types of electrical motor control systems. Under guidance of a qualified electrician, candidate must be able to make up to 480 V terminations using accepted methods, install conduit, perform work in accordance with the NEC. Able to operate troubleshoot and repair emergency generating equipment, transfer switches, programmable controllers, and other related equipment Preferred knowledge of pyro equipment and burner management systems. Good oral and written communication skills combined with the ability to operate mobile equipment, perform heavy lifting as needed as well as the ability to work in a dusty environment and temperatures in excess of 100 degrees. Must also be able to climb stairs and ladders multiple times daily and occasionally work in confined spaces. Working Conditions: Bending, lifting, climbing, pushing, pulling, kneeling, sitting stand, walk, kneel, stoop, squat, pull, push, climb, crouch, crawl, talk, hear, and see and standing (occasionally) for long periods of time. The essential duties of this position require moderate to heavy lifting and carrying. Must be able to position oneself to work in confined spaces such as trenches, pits, manholes, attics, and tunnels and demonstrate manual dexterity and be able to use hands to handle, or feel objects, tools, or controls. Exposure to moderate noise levels, vibrations, and bright lights; and exposure to dust, fumes, and gases; and all climate types including hot and cold temperatures, humidity, rain, snow, etc. Able to wear common protective or safety equipment such as safety shoes, glasses, gloves, hearing protection and hard hats when needed. React quickly using hands, fingers, or feet. Must be able to comprehend and follow written and oral instructions. Must be able to complete tasks even with frequent interruptions. Must be able to use discretion and independent judgment as needed. Must be able to speak clearly on the phone and to fellow workers. Benefits: Competitive Compensation Package Medical + Dental + Vision Coverage 401K + Company Match Life Insurance + Long Term Disability Coverage - 100% Company Paid Health Savings Account (HSA) Gym Reimbursement Program Tuition Reimbursement Program Wellness Check Program - Insurance Premium Discounts EAP Resources Paid Holidays Paid Time Off (PTO) Shift Differential This job description should not be interpreted as an exhaustive list of responsibilities or as an employment agreement between the employer and the employee. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification and are subject to change as the needs of the employer and requirements of the job change. Any essential functions of this position will be evaluated as necessary should an employee/applicant be unable to perform the functions or requirements due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the employee/applicant when possible. I acknowledge that I have read and understand the description of this position and have had the opportunity to ask my supervisor about any points I did not understand. I hereby state that I can perform the essential functions of this position with or without reasonable accommodation. #CARBOCERAMICS#LI-ONSITE#LI-AD1
    $46k-59k yearly est. 60d+ ago
  • Maintenance Technician-I

    Fort Valley State University 3.8company rating

    Electrician technician job in Fort Valley, GA

    Performs unskilled and semi-skilled maintenance, repair, adjustment, and minor construction work in the basic trades to ensure that facilities are properly maintained and meet University standards. Assists more skilled staff in the completion of larger and more complex assignments. Duties may fall into a variety of trades areas, including carpentry, painting, plumbing, electrical, mechanical, energy management, fire and life safety and locks. Primary Duties and Responsibilities: Assists with and learns to perform preventative maintenance for building systems (exterior envelopes and interior ceilings, floors, walls, windows, finishes and hardware, keys, panel alarm hardware, etc.), plumbing, electrical (lights, light tube changes, ballasts, outlets, circuitry, electrical panels), and mechanical systems including controls, pump, and motors. Assists with and learns to repair facilities structures, systems, and components, including performing minor repairs to building plumbing, low-voltage, and line voltage electric systems, door hardware, fire and life safety protection/equipment systems, sprinkler systems, and assisting in structural and roof inspections. Assists with and learns the maintenance of induction, air handling, and refrigeration units, including serving, cleaning and inspecting all related equipment. Assists with and learns to repair, maintain, and install waste, vent, and domestic water distribution systems. May assist in welding or fabricating tasks. Assists with and learns to perform electronic recordkeeping related to preventative maintenance and repair so that Facilities Management Services division makes the most efficient and effective use of computerized maintenance management and service request systems. Maintains a working knowledge of materials, systems and code requirements related to maintenance of university facilities. Responds to college emergencies and closures including adverse weather to be certain that all facilities are protected and remain operational. Operates a college vehicle and is responsible for its safe operation and reporting any observed maintenance needs. Maintains appropriate records and reports. Knows and understands all safety procedures of the University. Performs other duties as assigned. Knowledge of: Common hand tools; basic recordkeeping techniques; basic workplace safety procedures; basic use of computers to access automated recordkeeping tools and use email; basic customer service practices. Skills in: Basic computer use to maintain logs, inventories; respond to service requests and emails; access the computerized maintenance management system; access automated control systems. Ability to: Learn the functions of and use a variety of tools and power equipment; maintain routine records and reports in computerized and written formats; effectively use email; learn and apply health and safety regulations; perform assigned tasks independently and ask for supervision or guidance as needed; understand and follow oral and written directions; work from blueprints, shop drawings and sketches; establish and maintain cooperative working relationships. Minimum Position Requirements: High school or equivalent. One year of general experience including trades or labor, or custodial work. Education or training in the facilities maintenance trades may substitute for work experience. Must have a valid driver's license for operation of a motor vehicle and possess an acceptable driving record. Work Environment: Work is performed both indoors and outdoors with exposure to various weather conditions. May be exposed to potentially hazardous conditions, noise and temperature extremes. Position involves frequent bending, standing, kneeling, climbing ladders, reaching below and above shoulders, and lifting objects weighing up to 50 lbs. while performing job duties. Wrist, hand and finger dexterity is required to operate various equipment and materials. Direct reports: None The above list of job duties is not exclusive or exhaustive and the incumbent will be required to undertake such tasks as may reasonably be expected within the scope of the position. USG Core Values Statement The University System of Georgia is comprised of our 26 institutions of higher education and learning, as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at ************************************************************************* Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at ************************************************
    $32k-37k yearly est. 60d+ ago
  • Maintenance Technician - Alere

    Eco Material Technologies Inc. 4.8company rating

    Electrician technician job in Milledgeville, GA

    A maintenance technician is responsible for inspecting, maintaining, and repairing machinery, equipment, and systems within a facility. This role is essential for ensuring that all equipment is operating efficiently, minimizing downtime, and preventing costly breakdowns. ESSENTIAL FUNCTIONS Comply with Eco Material Technologies' safety policies and procedures. Inspect machinery, equipment, and systems to identify issues and ensure they are functioning properly and efficiently. This includes conducting routine inspections, checking for leaks, and testing equipment. Perform preventive maintenance tasks to keep equipment in good working condition and prevent breakdowns. This can include lubricating moving parts, replacing worn-out components, and cleaning filters. Accurately diagnose and troubleshoot issues with equipment and systems, using diagnostic tools and their own expertise. Perform repairs or replace parts as necessary. Work with both electrical and mechanical systems within the facility. Respond to emergency repair requests to address urgent issues and minimize downtime. Maintain accurate records of maintenance and repair activities, including work orders, equipment manuals, and inventory. Communicate effectively with colleagues, supervisors, and other departments to coordinate work, share information, and address issues. Stay up-to-date with advancements in technology and new maintenance techniques. Must keep work area clean and organized to ensure safety and efficiency. Generates work orders and closes them in operating systems once they are completed. May be required to be on-call. Regular attendance, timeliness, and scheduling flexibility. KNOWLEDGE, SKILLS, AND ABILITIES Must be able to follow safety protocols and adhere to company safety standards. Must have technical expertise of mechanical and electrical systems, problem-solving ability, manual dexterity, attention to detail, and communication skills. Ability to diagnose issues with equipment and systems by using diagnostic tools, observing symptoms, and testing components. Skilled in the use of a wide range of hand and power tools, such as wrenches, screwdrivers, impact wrenches, and pneumatic tools. Adaptable and willing to learn and multi tasks and set priorities. Ability to work effectively in Microsoft Office (Excel, Word, Outlook) Ability to collaborate and work with coworkers to solve complex problems. Ability to stay up to date with advancements in technology and new maintenance techniques. Must be proficient in Microsoft Office (Excel, Word, Outlook) and other pertinent operating systems. EDUCATION AND/OR EXPERIENCE High school diploma or equivalent. Vocational or technical training certificate or associate's degree in related field a plus 1-3 years' experience in a relevant field. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: Be exposed to sounds or noise levels that maybe uncomfortable Withstand exposure to temperature extremes inside or out Prolong standing or in stationary position Complete repetitive movements Bend and/or twist Lift/move/transport items up to 50 pounds Ability to work around dust, chemicals, and other substances, and in various environmental conditions Must tolerate an environment with inside ambient temperatures. Must be able to wear required personal protective equipment (hearing, vision and hard hat protection, safety shoes etc.) This is not necessarily an all-inclusive list of job-related responsibilities, duties, skills, efforts, requirements or working conditions. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities or may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.
    $39k-49k yearly est. Auto-Apply 60d+ ago
  • Maintenance Technician

    First Quality Enterprises 4.7company rating

    Electrician technician job in Macon, GA

    We are seeking Maintenance Technicians for our First Quality Baby Products facility located in Macon, GA. The primary responsibility of a Maintenance Technician is to maintain and repair production machinery and support equipment in a timely manner in order to support production. Responsibilities include: Keep all mechanical components of equipment in clean and good working order. Repair and report all mechanical problems in CMMS database. Report ongoing or unresolved issues to the appropriate personnel Plan sequence of operations and methods to use when making repairs and replacements following acceptable trade practices. Remove, rebuild and replace major modules such as knives, cutting dies, conveyor belts, drive belts, gear boxes, shafts and bearings Determine by regular inspection the repair and maintenance work necessary to prevent breakdowns. Assist in troubleshooting problem areas that impact quality, safety, waste, uptime, and production efficiency Perform preventive maintenance on all equipment Ensure that department equipment is maintained to meet applicable safety and housekeeping standards Locate parts in inventory and keep accurate records of required transactions. Keep appropriate personnel informed in case of shortages. Recondition defective parts removed from machinery as required. Work in a safe manner, observing rules and regulations directed to protect personnel and property from harm or damage Show leadership to fellow employees when and as expected to control the working effort for projects, repairs, etc. Can be given charge of a work crew and can constructively use everyone's time wisely. Minimum Requirements include the following: Must be 18 years of age. High School Diploma or equivalent. 3 or more years of Industrial or Manufacturing maintenance experience Ability to work a 12-hour shift, which includes a combination of AM and PM hours, weekends, and holidays First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, as a result of their role specifications, may come in to contact with sensitive data. First Quality is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status.
    $27k-39k yearly est. Auto-Apply 60d+ ago
  • Industrial Electrician - Second Shift

    Yancey Bros. Co 3.9company rating

    Electrician technician job in Griffin, GA

    Who We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As the Industrial Electrician you will perform fundamental electrical installs for industrial packaging on a daily basis. You will also perform all duties related to industrial packaging for backup power. Primary Responsibilities: Working knowledge of basic electrical installation Wiring AC & DC lights, 3-way switches, GFCI receptacles, Load Center Bending and sizing of conduit, sizing of wire Interpret current NEC codes Interpret shop drawings Additional Responsibilities: Participate in required safety program, and work in a safe manner. Additional duties as assigned by manager. Who We Are Looking For: To be successful in this position you should have prior experience as an electrician in either the commercial or residential field. You should possess a strong sense of urgency and desire to provide superior customer service. The ability to take direction and work in a team environment is essential to this position as well. Education/Experience: Specific industry experienced desired or an equivalent college degree State certification is preferred Required Qualifications/Skills: 3 years minimum experience as an electrician apprentice or journeyman as either a commercial or residential electrician Preferred Qualifications/Skills: A two year undergraduate degree from an accredited college preferred Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: Safety: We value the lives and health of our team and customers above all else. Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly. Teamwork: We work as one across our organization for the benefit of our customers. Excellence: We strive to be the best, continuously improving our customers' experience and the solutions we provide. Sense of Urgency: We respond quickly to customer needs and hold ourselves accountable for results. Ideal candidates will demonstrate the following values: Acting in a safe manner Exhibiting honesty and integrity Acting in a fair and ethical manner Team mentality Delivering quality results Embraces change / improvement Exhibiting superior customer service skills Exhibiting pride and ownership Working with a sense of urgency Exhibiting a winning attitude What We Offer: Yancey Bros. Co. offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure Competitive Pay Individual Bonus Opportunities Available Technician Tool Allowance 401k Plan Strong Company Match Employee Profit Sharing Financial Wellness Coaching Employee Wellness Program Medical, Vision, Dental Insurance Prescription Drug Coverage Flexible Spending Accounts Short & Long Term Disability Group Life Insurance Personal Time Off Paid Holidays Paid Sick Leave Career Development Tuition Reimbursement Ongoing Training Advancement Opportunities
    $45k-61k yearly est. 60d+ ago

Learn more about electrician technician jobs

How much does an electrician technician earn in Macon, GA?

The average electrician technician in Macon, GA earns between $40,000 and $80,000 annually. This compares to the national average electrician technician range of $42,000 to $77,000.

Average electrician technician salary in Macon, GA

$56,000
Job type you want
Full Time
Part Time
Internship
Temporary