Electrician technician jobs in Wayne, NJ

We are looking for self-motivated and safety-conscious candidates who would like to join our production team in our South Plainfield location! As well as the daily bonus up to $10 per hour! New employees can earn $90K in total compensation when working at Canam Steel Corp for a 50-hour work week. This includes the base rate, overtime, retention and production bonuses. There are additional ways to earn including referral bonuses. Position is full-time with benefits! 1st Shift Schedule Monday - Friday 7:00 AM - 3:30 PM + OT including some weekends JOB SUMMARY: The Maintenance Technician III supports production operations by performing preventative electrical/mechanical maintenance, troubleshoots and repairs production equipment, and performs repairs and maintenance of facility. Completes preventive maintenance and general maintenance in proper working order while abiding by all specified rules and regulations. ESSENTIAL FUNCTIONS: Performing troubleshooting and repair on electrical/electronic, hydraulic, pneumatic mechanical systems. Analyzing, troubleshooting, and repairing equipment- overhead cranes, roll formers, press brakes and resistance welders. Assist with the service and repairing of more complex equipment. Complying with applicable regulations according to OSHA and the department's Safety program. Troubleshoot, maintain, and repair PLC programs. Provide scheduled and emergency repairs to production equipment during production shift. Install and maintain production/facility equipment. Maintain a clean and organized work area. Adhere to safety protocols. Perform other duties as assigned by supervisor. Regular, reliable, punctual and consistent attendance. Must be able to work regular and/or flexible hours or shifts, overtime, weekends as required. Location 14 Harmich Road, South Plainfield, New Jersey 07080, United States Anticipated Pay Range $35.00-$40.00/hour + Weekly Production Bonus + Overtime Pay Range Disclaimer Please note that the compensation details listed reflect salary only, and do not include bonus or profit-sharing. Our salary ranges are determined by role, level, and location. The range displayed on the job posting reflects the minimum and maximum target for new hire salaries for this position. The range may vary by location. Within the range, individual pay is determined by additional factors, including job related skills, experience, and relevant education or training. BENEFITS: In addition to base salary, this role will be eligible for participation in Canam Steel Corp (CSC)'s benefits programs, including medical, dental, vision, (plus additional voluntary benefits) and 401K (with employer match). REQUIREMENTS: High school diploma or equivalent. Technical school preferred. At least 3 years of mechanical and electrical maintenance experience. Able to read electrical schematics, and mechanical Drawings Able to perform electrical troubleshooting and have a knowledge of electrical controls. Must have the ability to troubleshoot mechanical, hydraulics, electrical panels and electric motors. Must have basic knowledge of lock out / tag out and PPE. Experience in operating, troubleshooting and repairing various types of production machinery in a manufacturing environment. Licensed electrician, preferred. PHYSICAL DEMANDS: Frequent communication with others to exchange information. Standing for most of the shift, walking, use hands and fingers to handle or feel objects, tools, or controls. Reach with hands and arms; stoop, kneel, crouch, or crawl. Frequent repetition of motions that may include the wrists, hands and/or fingers. Frequent moving about to accomplish tasks or moving from one worksite to another. Frequent lifting or moving objects up to 50 pounds in all directions. Constantly thinking and processing information. Constantly maintaining concentration and focus on tasks. WORK ENVIRONMENT: Manufacturing floor with machinery. Exposure to airborne particles, loud noises, and extreme heat and cold. Use of personal protection equipment is required. DISCLAIMER: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. CSC retains the right to change or assign other duties to this position.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta's Ground Support Equipment team. A GMT (Stationary) specializes in completing repairs and utilizes preventive maintenance on motors and controls, Programmable Logic Controllers (PLC), pneumatic systems, conveyor systems, and machine shop equipment. The ideal candidate is proficient in the use of diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to resolve malfunctions and maintain equipment. Summary of responsibilities: Locates sources of problems by observing mechanical devices in operation and repair with precision measuring and testing instruments. Determines changes in dimensional requirements of parts by inspecting used parts and using rulers, calipers, micrometers, and other measuring instruments. Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures. Maintains equipment, parts, and supplies inventories by checking stock to log inventory levels; anticipating need; placing and expediting orders; and verifying receipt. Prepares maintenance reports by collecting, analyzing, and summarizing information and trends. External Applicants Only - Ground Maintenance Technician (Stationary) hired to work at the LGA airport receive a $5,000 sign-on bonus. You will receive $2,500 after 90 days of employment and the remaining $2,500 after 180 days of employment. The minimum starting hourly rate for this position is $36.22 with the ability to increase your hourly rate within 6 months of your start date, based upon premiums offered. Examples include but are not limited to CIMM Certification, Shift differential, and Skill differential. Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Qualified candidates must also possess at least one of the following: Electrical/Relay knowledge: Understanding and proficiency in repairing 12 to 50 VAC/DC control circuits, 120 VAC single-phase electrical circuits and control circuits, 480 VAC 3-phase electrical systems. PLC Controls/Network: Proficiency and knowledge of repairing PLC and the associated computer network systems. Allen Bradly PLCS, SLC 500, SLC 5000 and Micro Logix systems. Industrial Maintenance/Conveyor Systems/Passenger Loading Bridges (PLB): Knowledge of system operations for PLB, system operation for conveyor systems and heavy equipment maintenance on hydraulics/electrical/mechanical on large industrial machinery. Industrial A/C refrigeration: Knowledge of high-pressure point-of-use pre-condition air systems, low-pressure glycol chiller systems, and repair and isolate system failures, as well as the related software for both high- and low-pressure control circuits systems. 400 Hz Generator/Inverter Ground Power: Strong understanding of electronic and electrical components and proficiency at identifying problems and repairing and rebuilding them. A background in 400 Hz, testing equipment as needed to perform repair/overhaul, and the ability to read electrical schematics and drawings are required. Familiarity with Jetpower II, Jetpower Plus, and CSI units. Experience operating passive and resistive load banks and working in an electronics environment. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta's recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta's recruitment team, you can contact ...@delta.com . Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) Consistently prioritizes safety and security of self, others, and personal data. Embrace diverse people, thinking, and styles. Possesses a high school diploma, GED, or high school equivalency. Is at least 18 years of age and has authorization to work in the United States. Must have a valid driver's license. Must be proficient in English. Ability to lift items weighing between 50 and 70 pounds. Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays. Completion of a two-year degree at a post-secondary technical school or have a minimum of three years of demonstrated ability. Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. What will give you a competitive edge (preferred qualifications) A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas. Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics. Strong communication while working as a team and coordinating repairs with other GMTs and outside vendors. Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations. Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values - Care, Integrity, Resilience and Servant Leadership - every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: Competitive salary, industry-leading profit sharing program, and performance incentives. 401(k) with generous company contributions up to 9%. New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 - March 31). In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period. LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program. 10 paid holidays per calendar year. Birthing parents are eligible for 12-weeks of paid maternity/parental leave. Non-birthing parents are eligible for 2-weeks of paid parental leave. Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits. Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages. Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health. Domestic and International space-available flight privileges for employees and eligible family members. Career development programs to achieve your long-term career goals. World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint. Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies. Recognition rewards and awards through the platform Unstoppable Together. Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

Lakeside Manor is an assisted living facility in Staten Island, NY. With a commitment to quality care, Lakeside Manor serves its community through comprehensive health services and a compassionate team dedicated to resident well-being. Potential candidates can look forward to joining a reputable organization known for its exceptional standards in health care. Role Description This is a full-time, on-site role for a Maintenance Technician located in Staten Island, NY. The Maintenance Technician will be responsible for performing day-to-day maintenance tasks, troubleshooting equipment issues, conducting preventive maintenance, and repairing various types of equipment. The technician will ensure that all systems are functioning efficiently and safely, contributing to the smooth operation of the facility. Qualifications Skills in Equipment Maintenance and Industrial Maintenance Proficiency in Troubleshooting and Preventive Maintenance Experience in Maintenance & Repair Strong problem-solving abilities and attention to detail Excellent communication and teamwork skills Ability to work independently and manage multiple tasks General proficiency in skills to maintain an assisted living facility. Salary is $22-$35 an hour depending on qualifications and experience Employee contribution Medical insurance offered. PTO and sick time

This role involves performing preventive, predictive, and corrective maintenance on food processing and packaging equipment to ensure reliable and efficient production. The Maintenance Mechanic will troubleshoot mechanical, electrical, pneumatic, and hydraulic systems while supporting daily operations such as start-ups, changeovers, and breakdown recovery. Responsibilities include maintaining documentation, adhering to food safety standards, and assisting with equipment installations. The position requires close collaboration with production teams and maintaining a safe, clean work environment. Job Requirements: Conduct maintenance and troubleshooting on equipment including conveyors, mixers, ovens, pumps, fillers, and wrappers. Follow GMP, HACCP, SQF, and plant safety guidelines while completing work orders and logs in CMMS. Provide operational support including plant start-ups, shutdowns, and addressing equipment failures to reduce downtime. Job Qualifications: 2-5 years of industrial maintenance experience in manufacturing, preferably food processing, with strong mechanical aptitude. Experience with pneumatics, hydraulics, and basic electrical troubleshooting, plus ability to read blueprints and schematics. Ability to safely perform physical tasks and hold or obtain an NJ Black Seal Boiler Operator license.

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: Maintain the electrical in the building and facility equipment. Read and understand electrical schematics and blueprints Troubleshoot and wiring equipment Supervisor the Maintenance team Previous Experience: Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe Preferred Experience: Wiring electrical enclosures as per schematic given Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: Required: High School diploma Preferred: Electrical Technology or Engineering Degree Preferred: Electrical Certifications Company training will include Company's Quality Management System ISO 9001:2015 awareness Other Skills: An ability to work well under pressure Teamwork and problem-solving skills Good verbal and written communication skills Efficiency and organization Able to speak Spanish helpful

Job Description We are hiring immediately for a full time MAINTENANCE ELECTRICIAN position. Note: online applications accepted only. Schedule: Full time; Monday through Friday, hours may vary. Occasional Saturdays required. More details upon interview. Requirement: Certified Electrician with high voltage experience and familiarity with CMMS is required. Pay Range: $30.00 per hour to $43.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1470767. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: *************************** Skg Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM's clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. Essential Duties and Responsibilities: Provides quality customer service by providing one-on-one attention to detail. Responds to dispatch calls for machine repairs using company vehicle. Calls on existing customers to determine adequacy of service; listens to and resolves service complaints. Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area. Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities. Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair. Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability. Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment. Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational. Recommends appropriate sources of electrical power for new installations or renovation projects. Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc. Performs corrective maintenance in accordance with the work order system. Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner. Maintains clean and safe work environment; performs job safely. Exhibits professionalism with customers, fellow employees and others. Performs other duties as assigned. Qualifications: Valid Non-CDL Class C driver's license. Valid current state/local electrical license. Two years of trade school or related experience. Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation. Working knowledge of local, state and the National Electric Code (NEC). Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Our manufacturing site in Ridgefield, New Jersey, is an integral part of our sterile fill-finish manufacturing network. The site, bolstered by a dedicated team of Pharma Services colleagues, enables our customers to deliver life-changing medicines to patients around the world. The Ridgefield site exemplifies our commitment to quality, patient-safety and innovation in the pharmaceutical industry, making a significant impact on global health. Discover Impactful Work: As Maintenance Electrician you collaborate closely with the maintenance, engineering, and production teams to ensure electrical systems operate safely and efficiently to support production operation. You will be responsible for the installing, maintaining, troubleshooting, and repairing of electrical systems and equipment in a pharmaceutical manufacturing facility. Education High School diploma or GED equivalent. Basic Qualifications Two (or more) years of experience working in a maintenance capacity in a pharmaceutical or industrial manufacturing environment or other regulated environment. Must have a valid driver's license Preferred Qualifications 2+ years working with mechanical, electrical, automated packaging, and aseptic fill equipment, including syringe and high-speed vial filling systems. Strong knowledge of pumps, motors, gearboxes, drives, VFDs, servo motors, and Allen Bradley PLCs. Able to read electrical drawings, schematics, and P&IDs. Proficient in Microsoft Word, Excel, Outlook; familiar with Infor EAM CMMS, E-Beam, PLCs, and calibration processes. Aseptic gown qualified. Strong adherence to LOTO, PPE, confined space, work-at-height, and electrical safety protocols. Knowledge of OSHA, NEC, and local codes. Must be able to wear full safety gear. Must be able to work independently and collaboratively, clearly communicate issues and resolutions across shifts. This is a shift role with after-hours, weekend, and holiday call-in availability. Must be able to lift 50 lbs, climb stairs, and work safely on ladders using PPE. Benefits: We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation!

$1,500 Employee Referral Bonus Eligible Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Promote Safety. In accordance with MSHA and Vulcan standards, take an active role in prioritizing safety throughout the operation for yourself and others at all times. Repair and Maintain Plant Equipment. Perform repairs and maintenance throughout the plant including screen changes, conveyor belt repair and adjustment, wear parts replacement, crusher liner changes, and water pump service. Perform cutting, grinding, and welding as needed. Inspect Equipment and Structures. Perform daily inspections and maintenance of plant equipment to ensure safe, reliable, and compliant operations, maximize production, and minimize interruptions. Monitor Processes and Materials. Monitor and review the plant, specifically various aggregate crushing, washing, and screening areas to identify problems and ensure safety and materials compliance. Document and Record Information. Enter and maintain service and lubrication reports for the plant equipment used to ensure up-to-date preventative maintenance. Perform General Physical Activities. Perform a variety of tasks that assist with the operation of the plant, including cleaning, washing, sweeping, and shoveling materials. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in the aggregate or construction industry is preferred. Knowledge of Best Practices. Knowledge of general principles and practices of industrial maintenance, construction, or aggregate production is preferred. Flexibility. Must be able to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. * Approximate hours for this position are 12:00pm-9:30pm Mon-Fri and occasional Saturdays 6:00am-12:00pm* Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Salary and Benefits. The salary is prescribed by the applicable collective bargaining agreement. With no previous experience, the salary starts at $31.97 Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy regarding the use of temporary staffing agencies, placement services, and professional recruiters.

Job Description Qualifications: Start Time: 6:30 AM End Time: 3:00 PM Qualifications High school graduate orequivalent At least 3 years of relatedcommercial and industrial electrical maintenance experience Varied electrical andmechanical experience Proven understanding ofelectrical system components and theory Ability to read and understandmechanical, electrical, and equipment drawings Ideally, youll also have: Trade school or technicalprogram diploma Responsibilities: At , we empower communities tofocus on what matters most to them people. Through the delivery of ouroperations and maintenance services, youll make it simpler and more seamlessfor our manufacturing clients to continue to produce their critical productsand innovate for continued improvement. As an Electrician, youll joina team of multi-discipline technical experts, ensuring that our clients candeliver their products and services uninterrupted. Well give you the toolsto become an expert on the electrical systems that support our clientsoperations and keep their people safe. Youll grow your expertise to help yourteam succeed in the safe and time-critical operation, maintenance and repair ofmission-essential electrical equipment and components including low voltage andmedium voltage systems such as chillers, variable frequency drives (VFD),emergency generators, uninterrupted power supply (UPS), panel boards, branchpanels, motor control centers, and related facilities equipment. Youll contribute to thesuccess of our program with efficient preventive maintenance and effectivesolutions to complex challenges that may arise in our clients state of the artfacilities. Most importantly, youlltake actionto ensure the safety, healthand well-being of your team and our planet. Bring your innovative ideas,talent for multi-tasking, and sharp attention to detail to help our clientskeep America up and running. Working Conditions &Physical Requirements: Safety is a core value at . Weare committed to providing a safe and healthy workplace for all employees. Thisposition will spend a substantial amount of time performing safety sensitivelabor or services. The physical and environmentaldemands required to perform the essential duties of this position includestanding, walking, sitting, coordination, balance and agility demands, whichmay include the ability to stoop, kneel, squat, grasp, reach, performrepetitive hand movements. Additional demands may involve a specific level ofdexterity, grip strength, climbing and cardiorespiratory demands. The use ofappropriate safety equipment will be mandatory in these areas to preventhazardous contact. Comments/Special Instructions Electrician II work schedule Mondaythrough Friday 630 AM to 3 PM, will require to go on on call rotating scheduleonce trained.

Job DescriptionBenefits/Perks Competitive Compensation Career Advancement Opportunities We are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: Follow all safety rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Install new electrical systems and repair existing systems Provide bids for work orders Interact with customers, suppliers, and other professionals Qualifications: Journeyman Electrician License Previous experience as an Electrician is preferred Valid Drivers License Ability to stand for long periods and lift heavy objects Strong understanding of mathematical concepts and measurements Professional appearance and courteous personality

Con Edison's Protective System Testing (PST) team is responsible for the protection and control of the electrical system that powers one of the largest cities in the world. Our Electrical Technicians play a dynamic and vital role in ensuring that our Substation Protection and Control systems meet industry standards and continuously work on new and exciting technology to upgrade our systems. They work on a variety of projects and equipment including installation and testing of large power transformers and circuit breakers and microprocessor-based relay installations, to name a few. Required Education/Experience Associate's Degree Candidates for this position must possess an Associate's Degree in Electrical Technology, or related field of study. Or High School diploma with 2 years of academic programs completed in a Bachelors of Engineering program. Or High School diploma with 2 years of military academic programs to include one of the following: Nuclear Electronics Technician, Nuclear Electrician, and Aviation Electronics Technician (or applicable). and Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Candidates must have knowledge and experience with computer systems and are able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Preferred Education/Experience Bachelor's Degree Bachelor's Degree of Engineering in a related field and applicable work experience is preferred. and Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Candidates must have knowledge and experience with computer systems and must be able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Relevant Work Experience Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Required Candidates must have knowledge and experience with computer systems and must be able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Required Licenses and Certifications Driver's License Required Physical Demands Able to work in all weather conditions, i.e. excessive heat and/or cold Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs Ability to work in adverse conditions that include, noise, confined spaces, and high elevations Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces) Ability to work with, and in, the vicinity of high voltage and/or other high-energy systems Ability to be approved to wear and use either a full or half-face respirator and self-contained breathing apparatus (SCBA), without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations Ability to climb in and out of manholes and excavations Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses Work with equipment with a manufacturer weight rating of 350lbs Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment Additional Physical Demands Must be able to respond to Company emergencies by performing a System Emergency Assignment to restore service to our customers. Core Responsibilities Learn how to test complex circuits, read AC and DC schematics, interpret and use wiring diagrams, and understand microprocessor relay logic. Participate in extensive training program consisting of in-house classroom and lab training at our state-of-the-art Learning Center and hands-on training in the field. Learn about the operation, maintenance, and testing of protective relay systems, and transmission and distribution equipment. Work on electrical construction projects, performing acceptance testing, and commissioning new protection systems and equipment. Perform testing, troubleshooting and repairs on protective relays and system, substation equipment, control systems and telephones lines in substation and other locations. Able to travel and work in any location within the Company and service territory. Ensures that all work is being performed in effective and efficient manner. Ensures that the Human Performance Improvement (HPI) tools are incorporated into the plan and daily work activities. Committed to fostering a Zero Accident Culture, Diversity and Inclusion, achieving operational excellence, developing an effective Cost Management Culture and enhancing the customers experience. Committed to the Way We Work Principles, and adherence to the Companys Standards of Business Conduct and other Company procedures and other company procedures including Environmental, Health and Safety (EH&S).

Plant Maintenance Technician - Second Shift - Union - 250002KK Description $1,500 Employee Referral Bonus EligibleBuild Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do:Promote Safety. In accordance with MSHA and Vulcan standards, take an active role in prioritizing safety throughout the operation for yourself and others at all times. Repair and Maintain Plant Equipment. Perform repairs and maintenance throughout the plant including screen changes, conveyor belt repair and adjustment, wear parts replacement, crusher liner changes, and water pump service. Perform cutting, grinding, and welding as needed. Inspect Equipment and Structures. Perform daily inspections and maintenance of plant equipment to ensure safe, reliable, and compliant operations, maximize production, and minimize interruptions. Monitor Processes and Materials. Monitor and review the plant, specifically various aggregate crushing, washing, and screening areas to identify problems and ensure safety and materials compliance. Document and Record Information. Enter and maintain service and lubrication reports for the plant equipment used to ensure up-to-date preventative maintenance. Perform General Physical Activities. Perform a variety of tasks that assist with the operation of the plant, including cleaning, washing, sweeping, and shoveling materials. Additional Responsibilities. Other duties as assigned. Qualifications Skills You'll Need:Experience. Previous experience in the aggregate or construction industry is preferred. Knowledge of Best Practices. Knowledge of general principles and practices of industrial maintenance, construction, or aggregate production is preferred. Flexibility. Must be able to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. ***Approximate hours for this position are 12:00pm-9:30pm Mon-Fri and occasional Saturdays 6:00am-12:00pm***Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Salary and Benefits. The salary is prescribed by the applicable collective bargaining agreement. With no previous experience, the salary starts at $31. 97Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy regarding the use of temporary staffing agencies, placement services, and professional recruiters. Job: Facility Maintenance Primary Location: New Jersey-Hamburg Organization: GM - NY/NJ Schedule: Full-time Job Posting: Oct 7, 2025, 7:40:42 PM

Benefits: 401(k) Bonus based on performance Company car Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Join Our Team of Professional ElectriciansDo you value professionalism and punctuality? Do you want to work with the best pros in the electrical industry? Then you could be a candidate for Mister Sparky. If you value a rewarding career and would like your customers to be genuinely satisfied, you'll be fit for our team! Opportunities for professional electricians and customer service professionals are now available across the country.JOB SUMMARYThis position performs and coordinates the installation and service of electrical products and services in a residential and light commercial setting.JOB DUTIES Installation, repair, and maintenance of residential and commercial electrical equipment and services Determines general condition of all electrical equipment, can troubleshoot electrical malfunctions, and determine the extent of necessary repairs Works with and understands blueprints, electrical schematics and job specifications as it applies to your craft Identify proper materials and material quantities for new and existing repair projects Use the Straight Forward Pricing Guide, accurately present repair or installation options, and complete safety inspections REQUIRED REQUIREMENTS 3+ years of residential electrician field experience High school diploma or equivalent Must pass a background check and drug screening Clean driving record *Non negotiable* Must have the ability to communicate effectively to clients about issues and provide accurate solutions Must have local and state licenses as needed*Must provide proof that it os current and up to date* Compensation: $57,750.00 - $80,000.00 per year Join the Mister Sparky Team! We want to make joining our team as easy as possible. Our team members are the most valuable assets in our organization. It's true, our employees come first! How do we prove it? First things first. Pay- We believe the best performers deserve the best pay. That's why we want to pay YOU the best competitive rate. Flexibility- We want YOU to have time for the most important things in your life. Our scheduling is flexible. Find out how we do it. Career Path- We offer you an unlimited future with our world class training programs. Our training programs include Technical Training, Virtual technical training, communications, sales, and more! If you are serious about your career and want to learn from the best in the industry apply today! So, if you have a great attitude and a strong work ethic, and are someone who takes pride in the work you do, then we want to hear from you! Each franchise location is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. The franchisee sets their own compensation and benefits. All inquiries about employment, benefits, scheduling and compensation at this franchise should be made directly to the franchise location, and not to Mister Sparky Corporate.

About Endot Industries, LLC Endot Industries, part of Infra Pipe Solutions Ltd., brings 50 years of expertise in manufacturing high-quality polyethylene pipe for water, wastewater, gas, and conduit applications across North America. We are currently seeking an Electrical Maintenance Technician to join our team. This role will be responsible for ensuring production and auxiliary equipment is functioning properly and within safety guidelines. Job Description: The Electrical Maintenance Technician will be primarily responsible for maintaining, repairing, and testing electrical systems and equipment within our industrial facility. Secondary responsibilities will include supporting the greater maintenance team with general mechanical repair and maintenance tasks, including line changeovers when required. The ideal candidate will have a strong understanding of electrical systems, control wiring, safety protocols, and the ability to work independently or as part of a team. This position can be either 8am-4pm, 10am-6pm, or 4pm- 12am M-F plus overtime as required. Key Responsibilities: · Inspect, test, troubleshoot, and repair production machines and supporting equipment. · Communicate production machine and supporting equipment operational concerns with operators, other maintenance technicians, and supervisors to diagnose and repair issues. · Wire new circuits from 24V DC up to 480V AC and perform repair of existing circuits in that range. · Install and wire new equipment and components, per manufacturer specifications. · Assemble, install, and maintain gears, shafts, seals, bearings, and other mechanical system components. · Assemble, install, and maintain motors, transformers, wiring, and other electrical system components. · Assemble, install, and maintain plumbing systems and components for water, gas, hydraulic, and pneumatic systems. · Diagnose, repair and replace readouts, contactors, heat controllers, heater bands, and related/similar equipment. · Diagnose and repair industrial inkjet printers. · Repair, maintain, and improve the physical/electrical infrastructure of the production facility. · Diagnose and repair problems in machinery controlled by PLCs and operated by VFDs. · Maintain work area, tools, and equipment with attention to safety and cleanliness. · Perform preventive maintenance on specified machinery, in accordance with a structured preventive maintenance program. · Perform other duties as assigned. Qualifications: · High school diploma or general education degree (GED) is required. · Relevant Technical, Vocational, or Military training certificate or degree is preferred. · 5 years hands-on maintenance experience is required. · Ability to read and interpret electrical schematics is required. · Ability and desire to work overtime and on-call as required. · Bilingual (English/Spanish) is preferred. · Automation/PLC systems experience preferred. · Experience using MaintainX is preferred. Benefits: · Competitive salary, commensurate with experience. · Strong safety program. · Opportunities for career advancement. · Health, Dental, and Vision insurance. · 401(k) match. · Paid Vacation and PTO. · Ongoing training and support. Endot is committed to equal opportunity employment. Only those selected for an interview will be contacted. No phone inquiries, please. Endot does not accept unsolicited Agency resumes.

Benefits: Dental insurance Health insurance Vision insurance Job Title: Maintenance Technician Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities Conducting and completing scheduled preventative maintenance to maintain equipment efficiency. Knowledge of Computer Maintenance Management Systems (SAP preferred). Disassemble and assemble equipment for new installation and repair existing equipment. Assist operators in mechanical and electrical capacities to ensure production lines remain operational. Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment. Knowledge of using human machine interfaces to ensure equipment is operating on center lines. Ability to convert production lines to produce various products of different sizes materials. Properly troubleshoot and maintain glue and adhesive systems on packaging equipment. Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches. Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry. Familiarity with boiler operations. Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.) Provide maintenance support required to sustain continuous production on the Food Service line. Lubricate all machinery with the proper lubricants. Change drive belts, timing belts, etc., on all machinery. When possible, identify problems before they result in a hazard or downtime situations. Maintain water towers and test water. Operate air compressor and change filters and oils. Change packing and gaskets in all pumps. Operate roof heaters and air conditioners. Identify and replace bearings and seals as required. Perform Other Duties as Assigned Qualifications High school diploma or GED preferred. Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired. Training in forklift and pallet jack operation helpful. Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful. Ability to work cooperatively with a team. Must have visual, auditory, physical and mental ability to operate equipment safely.

Driven by a commitment to research, quality, and service, PDI provides innovative products, educational resources, training, and support to prevent infection transmission and promote health and wellness. Encompassing three areas, our Healthcare, Sani Professional and Contract manufacturing divisions, we develop, manufacture, and distribute leading edge products for North America and the world. We have several locations across the US and are looking for new Associates to join our team! POSITION PURPOSE We are seeking a Senior Electromechanical Technician to support our manufacturing operations by reducing equipment downtime and ensuring reliable performance of automated and electrical control systems. This role focuses on electrical troubleshooting and automation support across PLCs, servo drives, robotics, sensors, and control systems. Some mechanical skills are also required but secondary. The ideal candidate has deep expertise in industrial electrical systems and automation, with the ability to quickly diagnose and resolve complex control issues while collaborating with production, maintenance, and engineering teams. ESSENTIAL FUNCTIONS AND BASIC DUTIES Troubleshooting & Repair Rapidly diagnose and repair downtime issues across PLCs, servo drives, robotics, sensors, motor controls, and control valves. Calibrate, test, and replace sensors, encoders, and electrical feedback devices. Resolve integration and safety interlock issues within robotic cells, conveyors, and automated lines. Support limited mechanical troubleshooting only as needed to enable electrical/automation functionality. Preventive & Predictive Maintenance Execute preventive maintenance (PMs) focused on electrical and control systems for production equipment. Support predictive maintenance initiatives (e.g., electrical testing, thermal imaging, insulation resistance checks). Document electrical and automation repairs in the CMMS. Collaboration & Continuous Improvement Partner with engineers and operations on root cause analysis (RCA) for recurring electrical or control failures. Recommend and implement upgrades to controls, automation systems, and electrical hardware/software. Provide technical mentorship to junior technicians in electrical troubleshooting and automation practices. Compliance & Safety Follow and enforce OSHA/EHS standards during all maintenance activities. Ensure all lockout/tagout (LOTO) and electrical safety procedures are followed. PERFORMANCE MEASUREMENTS Equipment Reliability & Uptime Preventive & Predictive Maintenance Execution Troubleshooting & Technical Skills Safety & Compliance Contribution to Automation/Controls Improvements QUALIFICATIONS EDUCATION/CERTIFICATION: Associate Degree in Electrical Technology or Equivalent Industry Experience REQUIRED KNOWLEDGE: Hands-on expertise in PLC troubleshooting (Allen-Bradley, Siemens, or similar - programming experience a plus but not required). Strong knowledge of servo drives, VFDs, robotics, and industrial controls. Working knowledge of pneumatics, actuators, and mechanical power transmission systems. Ability to read and interpret electrical schematics, mechanical drawings, and equipment manuals. EXPERIENCE REQUIRED: At least 8 years in industrial maintenance preferred, with strong exposure to automation and electromechanical systems. Individuals with fewer years of experience may be considered if they demonstrate significant expertise in automation and electromechanical systems. Some mechanical aptitude required SKILLS/ABILITIES: Strong troubleshooting and problem-solving mindset. Excellent communication and teamwork skills. Flexibility to support multiple shifts and respond to urgent downtime events. Testing equipment (e.g., oscilloscopes, multimeters) Familiarity with industrial protocols (e.g., Ethernet/IP, Modbus, Profibus). Experience with robotics, motion control, automation, or machine vision systems. WORKING CONDITIONS No hazardous work conditions. Position in a manufacturing plant environment. Production floor work is required for installation, testing, or troubleshooting equipment and control systems. SALARY RANGE $70,000 - $90,000 annually, plus bonus and OT pay (as necessary) PDI is pleased to offer a comprehensive and affordable benefits program to our associates, which includes: Medical & prescription drug coverage Dental / Vision plan 401(k) savings plan with company match Basic and supplemental life insurance Flexible Spending Accounts (FSAs) Short- and long-term disability benefits Health Advocacy Program / Employee Assistance Program (EAP) Many other voluntary benefit plans such as: Legal assistance, critical illness, hospital indemnity and accident coverage, discounted home/auto/rental insurance, employee discounts and pet insurance At PDI, we are also committed to helping our associates maintain a healthy and sustainable work/life balance and are proud to provide: Sick leave, generous vacation and holiday time, paid parental leave, summer hours, flex place/flex time options

Position Overview: This role involves the maintenance, repair, and enhancement of machinery utilized in food manufacturing processes. The main emphasis is on the upkeep and documentation of electrical and control systems, addressing both hardware and software aspects to ensure efficient production operations. Key Responsibilities: Maintain current documentation for all electrical and control systems. Assist Mechanics and Electro-Mechanics in diagnosing and resolving electrical or control-related issues. Provide training and coordinate the activities of Electro-Mechanics across all shifts as needed. Occasionally work offsite to support equipment troubleshooting and repairs. Ensure production equipment is maintained according to the production schedule. Conduct electrical and mechanical inspections safely while equipment is operational. Address corrective, preventive, or scheduled repairs during equipment downtime following company and vendor specifications. Work independently or with a mechanic to identify and rectify equipment failures, restoring production promptly. Complete tasks in adherence to government regulations, GMP, safety standards, quality control measures, and company procedures. Perform preventive, scheduled, or corrective maintenance on batching and continuous process control systems, including networks, AC/DC and servo drives, pneumatics, hydraulics, and mechanical components. Maintain secondary systems for steam, hot and chilled water, pneumatic air, electrical power, refrigeration, HVAC, and emissions control. Keep accurate work records in accordance with work orders, backlog, and job assignment systems. Carry out other assigned duties as required, which may include travel for parts procurement, training, or additional responsibilities. Aim to enhance the quality, legality, and safety of products and manufacturing processes. Ensure the assigned work area is clean and organized, reporting any potential contamination or suspicious activities to a Supervisor immediately. Qualifications: High school/military training and practical experience in a related field, with a background in complete machine and electrical control system installation. Familiarity with Rockwell, Siemens, and Mitsubishi software, as well as preventive maintenance software, is preferred. Ability to read and interpret electrical, mechanical, instrumentation, and control systems design documentation. Working knowledge of control system projects, including machine layout, control drawings, P&ID, and basic troubleshooting for A/B-Rockwell, Siemens, and Mitsubishi. Ability to perform basic and advanced mathematical calculations, converting units of measurement. Competent in completing forms detailing maintenance work performed. Proficient in reading and interpreting work orders, operating manuals, and maintenance instructions.

How you'll help us Keep Climbing (overview & key responsibilities) At Delta Air Lines, connection is at the heart of everything we do and guides our every action. We strive to welcome and care for all of our customers during their travels with us and aim to deliver an elevated experience. As a Ground Maintenance Mechanic (GMM) in a stationary role, you will be a part of Delta's Ground Support Equipment team. The GMM (Stationary) is responsible for the maintenance of stabilized stationary machinery and equipment. Your key maintenance functions include inspections, minor troubleshooting, repairing, removing, and replacing components, cleaning, and assembly. This opportunity requires a minimum of 6 months of experience in an industrial powered mechanical environment and an understanding of mechanical, electrical, hydraulic, and pneumatic disciplines as they apply to industrial powered systems. If you have experience as a semi-skilled industrial maintenance mechanic, then this role is right for you. You will perform all routine and non-routine maintenance on the following while reporting any issues to GSE Supervision: Passenger loading bridges (interior, exterior, console, and dock lights) and interior and exterior painting (including bulb and lens replacement). Air handler hoses, adapters, air filters, condensate pans, and indicator bulbs and lenses. Gear boxes, bearings and shafts, roller replacements, belt re-lacing, and belts replacements. Staff's baggage handling system (BHS) control rooms as well as reconciling bag jams to keep BHS flowing. Ground power cables and associated clamping/saddles. Stationary equipment like water cabinets, loading bridges, air handling systems, baggage conveyor systems, and 400 Hz gate power. Small component repair and build-up of non-specialized components on specialized equipment like air conditioning adapters, water cabinet adapters, baggage carrousel bumpers, and dock light controllers. External Applicants Only - Ground Maintenance Mechanic (Stationary) hired to work at the LGA airport receive a $2,500 sign-on bonus. You will receive $1,250 after 90 days of employment and the remaining $1,250 after 180 days of employment. Eligible Delta employees based in New York City (JFK or LGA) can be reimbursed up to $250 per month for specific transportation expenses incurred while traveling to and from work. Employees using public transit, including trains, buses, subways, ferries or van pools to get to and from JFK or LGA may be eligible. Delta Air Lines will never ask candidates for money throughout our recruitment process, including for any pre-employment screenings. All email communications with Delta's recruitment team will come from a Delta email domain. If you have any questions about the legitimacy of an outreach from Delta's recruitment team, you can contact ...@delta.com . Internal Movement Eligibility Internal Employees: Before applying for this position, please reference the company's Internal Mobility Policy and Residency Policy to ensure you meet all eligibility requirements. You must be in good standing, which includes meeting performance standards and tenure requirements in your current role. For more information, visit the HR portal or contact your manager or HR representative. Compliance with these policies is mandatory for consideration. What you need to succeed (minimum qualifications) Consistently prioritizes safety and security of self, others, and personal data. Embrace diverse people, thinking, and styles. Possesses a high school diploma, GED, or high school equivalency. Is at least 18 years of age and has authorization to work in the United States. Must have a valid driver's license. Must be proficient in English. Ability to lift items weighing between 50 and 70 pounds. Be willing to work a fixed and/or rotating schedule including afternoons, evenings, weekends, and holidays. Must achieve a satisfactory score on entry tests structured to determine ability to perform required tasks. What will give you a competitive edge (preferred qualifications) Ability to read, comprehend, and apply information found in technical documents, manuals, and schematics. Strong communication while working as a team and coordinating repairs with other Delta personnel and outside vendors. Respond to customers' needs with minimum direction and perform repairs in time-sensitive situations. Completion of a two-year degree at a post-secondary technical school and/or related Military experience. Benefits and Perks to Help You Keep Climbing Our culture is rooted in a shared dedication to living our values - Care, Integrity, Resilience and Servant Leadership - every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way: Competitive salary, industry-leading profit sharing program, and performance incentives. 401(k) with generous company contributions up to 9%. New hires are eligible for up to 2-weeks of vacation. This is earned for use in the following vacation year (April 1 - March 31). In addition to vacation, new hires are eligible for up to 56 hours of paid personal time within a 12-month period. LGA/JFK employees may be reimbursed up to $250/month for specific transportation expenses through the NYC Transit Reimbursement Program. 10 paid holidays per calendar year. Birthing parents are eligible for 12-weeks of paid maternity/parental leave. Non-birthing parents are eligible for 2-weeks of paid parental leave. Comprehensive health benefits including medical, dental, vision, short/long term disability and life insurance benefits. Family care assistance through fertility support, surrogacy and adoption assistance, lactation support, subsidized back-up care, and programs that help with loved ones in all stages. Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health. Domestic and International space-available flight privileges for employees and eligible family members. Career development programs to achieve your long-term career goals. World-wide partnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon footprint. Business Resource Groups created to connect employees with common interests to promote inclusion, provide perspective and help implement strategies. Recognition rewards and awards through the platform Unstoppable Together. Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare.

Con Edison's Protective System Testing (PST) team is responsible for the protection and control of the electrical system that powers one of the largest cities in the world. Our Electrical Technicians play a dynamic and vital role in ensuring that our Substation Protection and Control systems meet industry standards and continuously work on new and exciting technology to upgrade our systems. They work on a variety of projects and equipment including installation and testing of large power transformers and circuit breakers and microprocessor-based relay installations, to name a few. Required Education/Experience * Associate's Degree Candidates for this position must possess an Associate's Degree in Electrical Technology, or related field of study. Or High School diploma with 2 years of academic programs completed in a Bachelors of Engineering program. Or High School diploma with 2 years of military academic programs to include one of the following: Nuclear Electronics Technician, Nuclear Electrician, and Aviation Electronics Technician (or applicable). and Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Candidates must have knowledge and experience with computer systems and are able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Preferred Education/Experience * Bachelor's Degree Bachelor's Degree of Engineering in a related field and applicable work experience is preferred. and Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Candidates must have knowledge and experience with computer systems and must be able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Relevant Work Experience * Strong knowledge of basic AC and DC electrical power theory and circuit analysis, including three phase AC power systems, as well as a strong working knowledge of mathematics and the ability to perform calculations involving basic trigonometry and vector analysis. Required * Candidates must have knowledge and experience with computer systems and must be able to use these to perform automated testing, as well as prepare spreadsheets and technical reports. Required Licenses and Certifications * Driver's License Required Physical Demands * Able to work in all weather conditions, i.e. excessive heat and/or cold * Perform heavy manual labor, i.e. push, pull, and lift up to 50lbs * Ability to work in adverse conditions that include, noise, confined spaces, and high elevations * Ability to work in inclement weather and adverse conditions (i.e., excessive heat, cold, noise, confined spaces) * Ability to work with, and in, the vicinity of high voltage and/or other high-energy systems * Ability to be approved to wear and use either a full or half-face respirator and self-contained breathing apparatus (SCBA), without facial hair or other conditions that may interfere with the seal, in accordance with OSHA regulations * Ability to climb in and out of manholes and excavations * Stand, walk, lift, climb, bend, kneel, stoop, and/or reach for the duration of the workday * Wear necessary Personal Protective Equipment (PPE), i.e. fire-retardant clothing and safety harnesses * Work with equipment with a manufacturer weight rating of 350lbs * Use equipment with a maximum weight rating of 375lbs when wearing and/or carrying 25lbs of clothing and equipment Additional Physical Demands * Must be able to respond to Company emergencies by performing a System Emergency Assignment to restore service to our customers. Core Responsibilities * Learn how to test complex circuits, read AC and DC schematics, interpret and use wiring diagrams, and understand microprocessor relay logic. * Participate in extensive training program consisting of in-house classroom and lab training at our state-of-the-art Learning Center and hands-on training in the field. * Learn about the operation, maintenance, and testing of protective relay systems, and transmission and distribution equipment. * Work on electrical construction projects, performing acceptance testing, and commissioning new protection systems and equipment. * Perform testing, troubleshooting and repairs on protective relays and system, substation equipment, control systems and telephones lines in substation and other locations. * Able to travel and work in any location within the Company and service territory. * Ensures that all work is being performed in effective and efficient manner. * Ensures that the Human Performance Improvement (HPI) tools are incorporated into the plan and daily work activities. * Committed to fostering a Zero Accident Culture, Diversity and Inclusion, achieving operational excellence, developing an effective Cost Management Culture and enhancing the customers experience. * Committed to the Way We Work Principles, and adherence to the Companys Standards of Business Conduct and other Company procedures and other company procedures including Environmental, Health and Safety (EH&S).