Top Electronic Assembly Technician Skills

Below we've compiled a list of the most important skills for an Electronic Assembly Technician. We ranked the top skills based on the percentage of Electronic Assembly Technician resumes they appeared on. For example, 9.9% of Electronic Assembly Technician resumes contained Component Level as a skill. Let's find out what skills an Electronic Assembly Technician actually needs in order to be successful in the workplace.

The six most common skills found on Electronic Assembly Technician resumes in 2020. Read below to see the full list.

1. Component Level

high Demand
Here's how Component Level is used in Electronic Assembly Technician jobs:
  • Performed testing and troubleshooting to the component level of final assemblies.
  • Contracted to General Dynamics (Onsite) Provided component level prototype assembly schematics and rework of circuits.
  • Provide detailed symptom descriptions for failures uncovered during System Integration to assist in component level troubleshooting.
  • Debugged analog and digital circuits to component level.
  • Performed troubleshooting of breakers to component level.
  • Read and understand electronic schematics, troubleshooting to component level.

Show More

2. Final Product

high Demand
Here's how Final Product is used in Electronic Assembly Technician jobs:
  • Tested & troubleshot final product at QC with outstanding no return record.
  • Tested and inspected final products.
  • Installed various types of antennas Supported engineering test personnel with operational tests, evaluation and delivery of final product.
  • Retrieved design models from categorization department and interpreted design drawings to produce final product from drawings and archives.
  • Test Final Products and Conduct Scientific Research in a Fast-Paced Highly Scientific Establishment
  • Trim resistors to specification for final product assembly.

Show More

3. Electrical Systems

high Demand
Here's how Electrical Systems is used in Electronic Assembly Technician jobs:
  • Maintain electrical systems; implement processes and procedures; assembly of pneumatics and electrical panels.
  • Build custom electrical systems to blueprint specifications using various electronic tools, and testing equipment.
  • Repair of electrical systems and components using electrical schematics.
  • Worked installation of electrical systems with engineers and technicians, to develop an operation guide and fault manuals.
  • Preformed FTP's on Fuel Systems, Landing gear, Electrical Systems, and Hydraulic Systems.
  • Maintain and service engine and transmission, brake jobs, steering and suspension systems, and some vehicle electrical systems.

Show More

4. PCB

high Demand
Here's how PCB is used in Electronic Assembly Technician jobs:
  • Utilized Process Control documentation; Mounted & Wired PCB's into Electro-Mechanical unit enclosures.
  • Diagnose failed PCB's to component level and test reworked units.
  • Experienced in PCB construction, including surface mount devices.
  • Programmed microprocessors on PCB boards.
  • Experienced with cable cutting/routing/soldering, PCB soldering Interpreted Engineering Drawings
  • Interfaced with outside OEM engineers and quality group to maintain quality and yield for pcb assemblies
  • Build compensation PCB's by hand using 805 service mount resisters as per theComp-sheet.
  • Assembled PCB boards manually Prepped and Coated PCB boards according to ISO 9000 standards
  • Assembled wire harnesses and modular PCBs into large, final box build assemblies.
  • General and prototype Assembly * PCB testing, programming, troubleshooting and repair
  • Assembled, modified and reworked PCB assemblies including de-soldering, replacing parts.
  • Solder, manufacture boxes, PCB Boards, Potting and Conformal Coating.
  • Inserted components on PCB and operated Genrad, HP 3070 series.
  • Soldered and de-soldered cabling and component level PCB.
  • Assemble and tests handheld component containing AOR 8200 receiver, direction finding module PCB, video adapter and microprocessor.
  • Tested Printed Circuit Boards (PCB) using Fairchild In-circuit tester, troubleshooting failures to component levels.
  • Solder Tech, soldering workers to laser PCBs For laser guns.
  • Express Employment, left for permanent offer] PCB soldering/assembly of monitoring devices, base stations, serving as transdermal alcohol-use detectors
  • Assembled, soldered, wired and pre-tested computer monitors and Printed Circuit Board (PCB) .
  • Performed surface mount manual assembly; install electronic components on PCBs .

Show More

5. Test Procedures

high Demand
Here's how Test Procedures is used in Electronic Assembly Technician jobs:
  • Define test procedures and conditions for testing.
  • Assemble, Calibrate, and Test industrial computers and machine interface equipmentCreate and update assembly and test procedures
  • Assisted engineering and quality control in the development and execution of factory test procedures.
  • Performed testing and troubleshooting per acceptance test procedures using mechanical and schematic drawings.
  • Developed test procedures and set-ups that eliminated unnecessary man hours and accelerated production.
  • Completed assemblies with final test procedures and documentation.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Circuit Boards

high Demand
Here's how Circuit Boards is used in Electronic Assembly Technician jobs:
  • Responsibilities-Assembled, Inspected, and Repaired Circuit Boards -Installed Wiring Harnesses and assembled motor assemblies for customized wheelchairs
  • Wired and installed electronic sub-assembly units and circuit boards.
  • Assembled electronic circuit boards on manufacturing line.
  • Preformed re-engineered task to include the repair on circuit boards; tested electronic circuit boards using an oscilloscope.
  • Assembled, reworked and repaired printed circuit boards, coils, cables, harnesses, modules and units.
  • Earned level II ISO soldering certification during which time I populated and soldered railroad scanner circuit boards.
  • Tested, troubleshoot and repaired products comprised of printed circuit boards, transducers, and mechanical devices.
  • Have experience in shipping and packaging, and mainly Surface Mount Technology building circuit boards.
  • Programmed microprocessors and pagers and completed surface mount and through-hole soldering of printed circuit boards.
  • Displayed mini and micro soldering skills on printed circuit boards while looking under a microscope.
  • Manufacture and assembly of printed circuit boards, control panels, and cable harnesses.
  • Soldered surface mount and through hole components on the new designed circuit boards.
  • Modified all printed circuit boards using very small tools plus components for repair.
  • Prepare components to be loaded onto circuit boards and electrical assemblies.
  • Add components (surface mounts) to printed circuit boards.
  • Assembled several components into printed circuit boards for wave soldering.
  • Soldered and modified circuit boards with components according to engineers.
  • Assembled and calibrated circuit boards to drive LCD products.
  • Connected LED and power sensor switches to circuit boards.
  • Utilize soldering skills and experience to work/rework circuit boards.

Show More

7. Trouble Shooting

high Demand
Here's how Trouble Shooting is used in Electronic Assembly Technician jobs:
  • Perform testing and trouble shooting of board modules to the component level analog and digital.
  • Trouble shooting down to component level of failed products.
  • Trouble shooting and calibrated devices.
  • Performed trouble shooting tests for monitors
  • Trouble shooting circuit boards, diagnosing all electronic components using digital multimeter.
  • Trouble shooting on electrical circuits Switchgear wiring/panel fabrication Electrical/Mechanical assembly Sensor calibration

Show More

8. Hand Tools

high Demand
Here's how Hand Tools is used in Electronic Assembly Technician jobs:
  • Use of electronic meters, hand tools, and bench tools.
  • Used multiple hand tools and equipment to complete jobs.
  • Use of various test equipment and hand tools.
  • Used crimping tools and basic hand tools.
  • Use various hand tools, solder equipment.
  • Assemble bench level mechanical and electrical precision downhole oil well guidance using hand tools.
  • Use hand tools such as screw drivers, wire strippers, crimpers, torque tools, etc.
  • assemble large ovens in a timely manner.uses hand tools and air compress guns .connect wires

Show More

9. Electronic Assembly

high Demand
Here's how Electronic Assembly is used in Electronic Assembly Technician jobs:
  • Perform mechanical and electronic assembly of DC motors used in non-contact laser measurement devices in a production environment.
  • Managed a division of military grade electronic assembly.
  • Performed mechanical and electronic assembly as required.
  • Performed various phases of electrical, mechanical, and the electronic assembly of printers and computers.
  • Machine shop metal fabrication, electronic assembly, general warehousing duties, Inventory and material handling.
  • Buffalo, NY Electronic Assembly Assembling Circuit Boards - Soldering Quality Checks
  • Color correction Color separation Image manipulation Electronic assembly Photoshop 3D renderings using vector smart objects Product photography

Show More

10. SMT

high Demand
Here's how SMT is used in Electronic Assembly Technician jobs:
  • Received TAP (Timely Award Program) Award for SMT training and line improvements.
  • Received TAP Award for improving overall SMT line efficiency and network setup.
  • Populated PCB's using the Philips SMT pick and place machine.
  • Certified lead assembler for SMT and PTH assembly and repair.
  • Soldered SMT components on high frequency board.
  • Placed Thru Hole and SMT components on bare PC Boards.
  • Performed assembly using SMT reflow and wave soldering techniques.
  • Run YesTech inspection machine after smt.
  • Set up an operate SMT machine and feeders (occasionally ).
  • Assembled , soldered, reworked/ modified all SMT PCBs/PWAs/PCCs and 32awg.

Show More

11. Microscope

high Demand
Here's how Microscope is used in Electronic Assembly Technician jobs:
  • Participate in on-site installations of magnetic field canceling systems almost exclusively to solve E-Beam microscope image problems.
  • Assembled and repaired microelectronic components by hand under a microscope.
  • Assembled circuit cards for electron microscopes and other electronic equipment.
  • Solder using microscope on electronic components.
  • Hand assembled micro electronic components and RF modules using hot plates, hot gas equipment, and microscopes.
  • Clean room environment utilizing microscopes and anti static straps to prevent live circuit burnout of electronic micro chips.
  • Followed the drawings using computer, microscope and all Standards Procedures and regulations.
  • Experience with microscope soldering, rework, Touch-up and fine pitch soldering.
  • Work under Microscope, Tweezers, and handle delicate parts.
  • Worked using both binocular vision and mantas microscopes.
  • Soldered and wired very smaller electronic components with high precision and quality under microscope .
  • cable assemblies under microscope, fabricated harness boards for mass production of cables and optic subassemblies as per engineering documentation.
  • Operated wire-bonder, die-bonder, microscopes.

Show More

12. Assembly Line

high Demand
Here's how Assembly Line is used in Electronic Assembly Technician jobs:
  • Re-organized assembly and storage systems by utilizing batching and assembly line techniques for improved performance.
  • Ensured quality work for all internal and external customers, while maintaining a safe and clean workplace on the assembly line.
  • Assist with a new start-up production assembly line building robotic 3D printers.
  • Set up production assembly lines and prepared sampled items.
  • Assisted in reorganizing one area for assembly line production.
  • Assembled parts on engine assembly line.

Show More

13. Final Inspection

high Demand
Here's how Final Inspection is used in Electronic Assembly Technician jobs:
  • Complete final inspection along with sign offs in order for products to departure.
  • Perform final inspection and testing of assemblies and sub-assemblies.
  • Installed and wired units for final inspection.
  • Performed general electrical and circuit board assembly, testing, and final inspections of photo printers utilized to produce government identification photos
  • Performed Final Inspection of product providing feedback to manufacturing groups on quality improvement and discrepancy mitigation.
  • Perform final inspection and calibration on sleep respiratory therapy equipment prior to shipping.

Show More

14. Assembly Drawings

average Demand
Here's how Assembly Drawings is used in Electronic Assembly Technician jobs:
  • Assembled electronic components to assembly drawings, instructions and related documentation (slide line).
  • Updated revisions using Eco's and assembly drawings and schematics.
  • Followed schematics assembly drawings and technical prints in assembly process to insure proper assembly and functionality of equipment.
  • Position required a mind for attention to detail in addition to aptitude for interpreting mechanical and/or assembly drawings.
  • Performed electrical-mechanical installation for shrink packaging machines Interpret assembly drawings, mechanical and electrical.
  • Produced electronic components by assembling and soldering parts and sub-assemblies per assembly drawings and documentation.

Show More

15. Mechanical Assembly

average Demand
Here's how Mechanical Assembly is used in Electronic Assembly Technician jobs:
  • Executed daily security operations and electrical/mechanical assembly of various missiles from start to finish.
  • Followed appropriate methods and procedures to complete mechanical assembly of components or products.
  • Performed a wide variety of manufacturing tasks primarily in electronic and mechanical assembly.
  • Perform electrical and mechanical assembly of mechanical device including high pot testing.
  • Helped other co-workers to carry out mechanical assembly related tasks.
  • Perform electrical and mechanical assembly of packing machinery for microwave popcorn.

Show More

16. Electronic Equipment

average Demand
Here's how Electronic Equipment is used in Electronic Assembly Technician jobs:
  • Assembled, installed and trouble shoot electrical and electronic equipment and circuitry with electrical/electronic test equipment and repair problem.
  • Performed preventative maintenance and repairs on electronic equipment.
  • Assembled, tested, and repaired electronic equipment; 80-100 units/day.
  • Trained customers to maintain, troubleshoot and repair electronic equipment.
  • Analyze and troubleshoot electronic equipment down to the device level utilizing oscilloscopes, electrical meters and other monitoring equipment.
  • Install new wirings to upgrade electronic equipment's of trolley cars.

Show More

17. ESD

average Demand
Here's how ESD is used in Electronic Assembly Technician jobs:
  • Test the ESD wrist and shoes strap to see its working property.
  • Set up ESD protection for the stations in the new line.
  • Used ingenuity to effectively organize workspace to limit ESD and to streamline personal testing method.
  • Soldered printed circuit boards and conformal coating touch-ups per drawings using ESD Sensitive Parts.
  • Practiced Electro Static Discharge (ESD) and material handling procedures.
  • cable connecters, basic use of a multi-meter, expanded ESD safety skills.

Show More

18. ISO

average Demand
Here's how ISO is used in Electronic Assembly Technician jobs:
  • Assimilated night supervisory position for one year.
  • Selected by supervisor to train others to build panels because of previous quality experience.
  • Perform assembly operations in a safe manner based on prescribed safety methods as instructed by supervisor and/or leader.
  • Hand solder surface mount and thru whole components using specified solder type meeting ISO Standards.
  • Trained and experienced in ISO 9001.
  • Report job status and restraints to co-workers and supervisors; identify production inefficiencies and suggest potential improvements to product or process.

Show More

19. Setup

average Demand
Here's how Setup is used in Electronic Assembly Technician jobs:
  • Prepared parts for assembly, assembled cable setup, and operated lug machine (included as parts cable).
  • Assembled, setup and calibrated optical tables for MTF measurements (Black bodies).
  • Performed setup, machine operation and final product inspection.
  • Performed various function tests on completed units by means of multimeter, test fixtures, meg checker, and parameter setup.
  • Demonstrated ability in handling customer products, equipment setup, and operation.
  • Performed routine equipment setup verifying proper operation of factory machines within acceptable standards.

Show More

20. Calibrate

average Demand
Here's how Calibrate is used in Electronic Assembly Technician jobs:
  • Assembled/Tested/Repaired/Calibrated and Quality Controlled LED boards and Power boards.
  • Assemble, Calibrate, and Test pressure transducers
  • Calibrated current and older units when received.
  • Assemble, test, and calibrate electronic safety equipment for the rail system Used basic to intermediate electronic principles
  • Calibrated and troubleshot laboratory instruments.
  • Aligned and calibrated to make sure lenses and mirror are directed to the demanded optical components.

Show More

21. Electro-Mechanical

average Demand
Here's how Electro-Mechanical is used in Electronic Assembly Technician jobs:
  • Prepared, Drilled, and Assembled all Hardware for Electro-Mechanical unit enclosures.
  • Perform a wide variety of electrical, mechanical, electronic or electro-mechanical assembly operations.
  • Performed electro-mechanical tasks using a wide range of electronic equipment.
  • Build custom/ prototype cables/ wire harnesses/ electro-mechanical assemblies/ RF applications
  • Prepare Electronic PC Board using electro-mechanical skill.
  • Perform various electro-mechanical assemblies Work with engineering on prototypes, test fixtures and calibration.
  • Perform electro-mechanical assembly and testing NMR analytical instruments systems.
  • wire harness and various other small electro-mechanical assemblies.

Show More

22. Electronic Devices

average Demand
Here's how Electronic Devices is used in Electronic Assembly Technician jobs:
  • Manufactured shield terminations and soldered microelectronic devices.
  • Produced electronic devices made in the USA to automate and streamline the local and international restaurant industry.
  • Job responsibilities involved various tasks related to the assembly of electronic components including soldering for electronic devices previous to promotion.
  • Assembled and built electronic devices for military and commercial applications.
  • Refurbished computer and other electronic devices to customer standards.
  • Fabricated and assembled, computers and electronic devices.

Show More

23. IPC

average Demand
Here's how IPC is used in Electronic Assembly Technician jobs:
  • Soldered PWA Boards IPC/EIA J-STD-001.
  • Received IPC specialist soldering certification.
  • Performed peer inspection of products requiring IPC-A-610 Certification.
  • Perform Visual Inspections on products and perform quality control audits based on IPC-600 and IPC-610 and IPC 620 standards.
  • Reworked and repaired on-field returns and in-house defects in compliance with IPC-J-Standard, IPC-7711-Rework, IPC-A-6l0 Worker Proficiency
  • End of line Solder repair operator following SOP, IPC, and any EOC changes.

Show More

24. Electronic Systems

average Demand
Here's how Electronic Systems is used in Electronic Assembly Technician jobs:
  • Installed, repaired and tested electrical and electronic systems.
  • GENERAL ELECTRIC, Gibbsboro, NJ Bench Assembler - Government Electronic Systems Division, AEGIS Electronic Technician - Re-Entry Systems Department
  • Assemble electrical or electronic systems.
  • Assemble electrical and electronic systems.
  • Performed repairs to electronic systems.
  • Assemble electronic systems and support structures, install components and units and complete wiring for road marking controllers.

Show More

25. GPS

average Demand
Here's how GPS is used in Electronic Assembly Technician jobs:
  • Analyze line of bearing direction, 2-dimensional compass position, GPS validation using NMEA format and received signal strength indication data.
  • Tested GPS and compass using RS232 communication for valid response in NMEA format.
  • Installed GPS systems in Hertz rental vehicles

Show More

26. Through-Hole Components

average Demand
Here's how Through-Hole Components is used in Electronic Assembly Technician jobs:
  • Soldered with microscope on surface mount and through-hole components.
  • Soldered SMT parts *Touch-Up *Soldered Through-hole components *Inspected boards *Repair/Rework
  • Flex circuits, through-hole components and limited SMD work.

Show More

27. Assembly Instructions

average Demand
Here's how Assembly Instructions is used in Electronic Assembly Technician jobs:
  • Program these drives with latest software and customer software * Had to coordinate the proper assembly instructions for a particular drive.
  • Created and maintained paper and electronic assembly instructions for PWB, wire harness and mechanical assemblies utilizing engineering drawings.
  • Identify and assist engineering in documenting changes in assembly instructions or material utilization.
  • Observed computer monitors above workstations to follow assembly instructions for different engine models.
  • Assist building mechanical and electrical conveyor system assemblies per assembly instructions and procedures.
  • Perform verification tests in accordance with assembly instructions.

Show More

28. BOM

low Demand
Here's how BOM is used in Electronic Assembly Technician jobs:
  • Worked with electronics schematics, BOM's, Oracle, and Visio, to procure components and assemble PCB's.
  • Assemble Microelectronic semiconductor devices, components and sub-assemblies using BOM systems and Specification.
  • Review prototype systems and sub-assembly electrical designs for functionality and BOM completion.
  • Wire stripping/wire-crimping/splicing/assemble and disassemble units followed by BOM instructions.
  • Review and modify BOM's, assembly prints, and schematics prior to release to production.
  • Work from standard manufacturing practices and documentation providing feedback to engineering as needed on drawings, BOM's, and processes.

Show More

29. Drill Press

low Demand
Here's how Drill Press is used in Electronic Assembly Technician jobs:
  • Used a vertical milling machine, lathe, drill press, sheet-metal shear and brake to fabricate components.
  • Operated lathes, surface grinders, milling machines, drill presses, saws, etc.
  • Operate drill presses, punch presses, riveting machines, inspection equipment.
  • Operate hand tools, portable power tools, drill press, punch press, and riveting machines to assist in assembly.
  • Operated drill press, hydraulic pipe bender, water saw, table saw, ratchet, drill and other pneumatic tools.
  • Set up and operated fabricating machines, such as brakes, rolls, shears, hand press, and drill presses.

Show More

30. Control Panels

low Demand
Here's how Control Panels is used in Electronic Assembly Technician jobs:
  • Performed layout and assembly of electrical/electronic wiring and components for process control systems control panels.
  • Assembled and wired custom industrial electrical control panels for pump systems according to engineered specifications.
  • Research and development of automated control panels.
  • Required to build drive-line systems, run electrical lines to control panels, install all vacuum lines and lube lines.
  • Assembled S39 control panels, valves, and connector systems.
  • Assisted head Machinist in creating enclosures for the customized control panels and simplex panels.

Show More

31. Electronic Parts

low Demand
Here's how Electronic Parts is used in Electronic Assembly Technician jobs:
  • Prepared electronic parts, assembled and soldered as in schematic drawings, tested, and finished packing.
  • Assemble mechanical and electronic parts for U.S. mail delivery panels.
  • Provided spot maintenance for the various electronic parts for the company.

Show More

32. Verbal Instructions

low Demand
Here's how Verbal Instructions is used in Electronic Assembly Technician jobs:
  • Followed written or verbal instructions, assembled products to schematics and used a variety of hand tools including precision soldering techniques.
  • Work from production prints or assembly instructions, part list, wire list, diagrams, verbal instructions to assemble.
  • Read work orders, follow production drawings and sample assemblies, or receive verbal instructions regarding duties to be preformed.
  • Assemble according to drawings and/or verbal instructions.
  • Assembled and wired various models of water purification units following verbal instructions.
  • Prepared work to be accomplished by following written and verbal instructions relating to blueprint specifications.

Show More

33. Customer Specifications

low Demand
Here's how Customer Specifications is used in Electronic Assembly Technician jobs:
  • Configured completed devices according to customer specifications
  • Used power tools to mechanically build computer systems based on schematics or customer specifications.
  • Work with other disciplines to ensure proper installation to meet customer specifications.
  • Read and interpreted blueprints/ schematics to assemble merchandise set to customer specifications.
  • Followed prints and customer specifications to ensure products met or exceeded industry and customer standards.
  • Worked with engineers on improving cable performance to meet customer specifications.

Show More

34. Final Test

low Demand
Here's how Final Test is used in Electronic Assembly Technician jobs:
  • Performed final testing both electrical, mechanical and calibrated as needed.
  • Performed final testing and documentation of project build to specification for engines, transmissions, and wiring assemblies.
  • Evaluate, repair if necessary, calibrate, and final test of ADF Antennas.
  • Performed assembly, adjustments, first and final testing to meet engineering specifications.
  • Assemble, program and final test of lighting control systems.
  • Performed final testing on finished product ensuring 100%quality.
  • Performed non-destructive functional and final testing and recorded data for quality control purposes .
  • Test, Diagnose problems and repair Pc Boards as needed Pre-testing/Final testing, ensuring they meet both operation and appearance standards.

Show More

35. QC

low Demand
Here's how QC is used in Electronic Assembly Technician jobs:
  • Manufactured electronic parts from specifications on blueprints, inspected electronic parts in QC department.
  • Provided quality control inspection according to final QC procedures.
  • Assisted in component selection, QC and interfaced with vendors.
  • Performed final QC review of products prior to shipment.
  • Double check all modifications to be sure all is in place and correct and also performing QC inspection.
  • Worked under immediate supervision Inspected finished product with approval from QC or Supervisor before sending to next phase

Show More

36. Nasa

low Demand
Here's how Nasa is used in Electronic Assembly Technician jobs:
  • Maintain NASA Qualifications and Applicable Certifications.
  • Created electronic relays* Completed orders from Bowing, GE, NASA, and US Military* Soldered wires and parts to relays
  • Constructed cables and harnesses utilizing mechanical strippers, thermal strippers and crimp tools that followed specifications and procedures to NASA-STD-8739.4.
  • Tested mechanical and electronic components to NASA standards for the NASA Space Center, Houston, TX
  • Inspected all solder join according to NASA specifications.
  • Hold NASA soldering certificate for on-site work.

Show More

37. Electronic Products

low Demand
Here's how Electronic Products is used in Electronic Assembly Technician jobs:
  • Operated computer testing stations for quality assurance of all electronic products.
  • Calibrate, test, and log for all electronic products.
  • Delivered funtional and High-Quality assembled electronic products.
  • receive returned products, repair electronic products, assemble products,
  • Performed all operations related to the production of electronic products including preparing and installing components into printed circuit boards.
  • Delivered functional and high-quality assembled electronic products to various departments for quality control

Show More

38. Technical Support

low Demand
Here's how Technical Support is used in Electronic Assembly Technician jobs:
  • Provide some technical supports by installing image and setting up computers .
  • Planned, scheduled and prioritized levels of technical support according to customer requirements and management direction.
  • Reviewed supplier manufacturing processes, quality systems and provided technical support during start up.
  • Provided phone technical support to end users regarding installation and use of hardware/software products.
  • Provided technical support and instrument testing and calibration for internal and external customers.
  • Provide assembly technical support and computer technical support to fellow assembly technicians.

Show More

39. QA

low Demand
Here's how QA is used in Electronic Assembly Technician jobs:
  • Assembled prototype devices for use in undersea oil exploration Performed test and turn-up procedures Performed final QA on customer products
  • Test electronic boards (QA) Prepare complement line for production Complete required amount of production expected
  • Assemble electronic components into sub-assemblies while adhering to strict aerospace production techniques in accordance with QC/QA requirements.
  • Detailed QA/QC reporting and maintaining fabrication/equipment logs.
  • Provided testing and QA evaluations of Fiber Optical Network Cards and new & returning equipment.
  • Provided daily updates and reports on QA and fabrication tasks to the management.

Show More

40. AC

low Demand
Here's how AC is used in Electronic Assembly Technician jobs:
  • Developed and maintained procedures and preparation standards to help introduce practicality, efficiency and cleanliness to assemblies and production runs.
  • Ensured customer satisfaction by providing the highest quality products by ensuring all equipment was properly installed and working correctly.
  • Assemble and Manufacture electronic computer parts Perform Testing and Quality Check on all electronic computer parts before shipping
  • Repaired hundreds of electrical/electronic items using the various tools necessary to remove and replace damaged components.
  • Identify and communicate to production supervisor any issues needing immediate attention, including unsafe conditions or practices
  • Performed test verification, repair, and troubleshot, products to meet companies/customers satisfaction and requirements.
  • Soldered and used machinery to assemble computer and electronic components while in accordance with production sheet.
  • Work independently, efficiently, and accurately to complete orders within predetermined time frame.
  • Submitted ideas and techniques later considered by management and used in the manufacturing process.
  • Engaged in detailed component placement and inspected finished products to ensure customer satisfaction.
  • Full machine administration, dramatically reducing the need for manufacturing engineers' participation.
  • Remove and replace electronic components using properly solder techniques through completed qualified training.
  • Represented component manufacturers in prototype testing and production operation of commercial electronics.
  • Set up and performed epoxy operations required for manufacturing and printing.
  • Wire management, quality control for accuracy/defects using company approved diagrams.
  • Maintained and repaired production machines resulting in reduced service technician visits.
  • Analyze extracted MVIP database query reports for daily production management planning.
  • Read interpret and understand assembly documentations and perform jobs accordingly.
  • Edited documents, filed documents and facilitated standard office procedures.
  • Determined operational accuracy of instruments under varying line voltage conditions.

Show More

41. Mil-Std

low Demand
Here's how Mil-Std is used in Electronic Assembly Technician jobs:
  • Certified to MIL-STD-2000 for both thru-hole and surface-mount soldering techniques.

Show More

42. Electrical Assembly

low Demand
Here's how Electrical Assembly is used in Electronic Assembly Technician jobs:
  • Team Leader Responsible for electrical assembly and installing internal sub-pans.
  • Contracted to Panelmatic Inc. for Electrical Assembly.

Show More

43. ECO

low Demand
Here's how ECO is used in Electronic Assembly Technician jobs:
  • Recognized by supervisor for having outstanding quality and neatness of work performed.
  • Performed problem solving functions and made recommendations to engineering staff for improvements.
  • Recorded quantities and status inventoried items in a computer database system.
  • Recognized parts and polarity by visual inspection.
  • Maintain necessary documentation and records.
  • Follow instructions engineering and support production in rework jumper wires per ECR or ECO for prototype boards.
  • Recorded in log book and database amount of assembled batches approved for processing and amount of defects.
  • Interpreted test results and provide written recommendations for changes to product design/processes.
  • Recommended new methods of repair of chassis and circuit cards.
  • Record type and quantity of defect.
  • Identified and handled Records Module.
  • Cat 3, 5, and 6 Bench wiring Telecommunications wire integration.

Show More

44. PLC

low Demand
Here's how PLC is used in Electronic Assembly Technician jobs:
  • Manufactured PLC control cabinets for high temperature ovens.
  • Renovate and upgrade salvaged machine tools and industry specific assembly machines and systems to incorporate PLC control systems.
  • Test run final assembly and make any necessary changes to the equipment wiring, PLC programming or mechanical structural features.
  • Installed Power Distributions Unit PDU 480 volts, Transformer, Motor, Pump, AllenBradley PLC's Ladder Logic circuit.
  • Identified problems and made repairs to Electrical Panels and PLC Systems.
  • Performed initial startup tests on all products both PC and PLC based.

Show More

45. R

low Demand
Here's how R is used in Electronic Assembly Technician jobs:
  • Instructed junior personnel in the proper operation and troubleshooting of this equipment using the available technical documentation.
  • Repaired connectors, routed and upgraded systems, interpreted schematics and highly detailed technical manual procedures.
  • Performed component removal and installation, system operational checks, wiring inspections, and complete modifications.
  • Disinfected electronic medical assemblies with various chemical solutions to ensure sterilization of hardware equipment.
  • Performed diagnostic procedures on production units in order to ensure quality control.
  • Assembled custom upgrade kits for new field installations furthering education based technologies.
  • Test continuity and connections using ohmmeter or other standard testing equipment.
  • Assisted monitoring inflow and outflow of inventory assuring delivery time.
  • Determined through simple arithmetic inventory required for daily production quota.
  • Implement and improve existing schematics and workshop documentation for production.
  • Performed quality control and assurance on daily completed computer systems.
  • Assembled and tested digital modulators and processed optical fiber assemblies.
  • Researched and engineered modifications to meet customer's requirements.
  • Assisted Engineers with prototypes and defined assembly procedures.
  • Notified management of potential out of specification products.
  • Executed daily operations of stress testing assembled components.
  • Completed supply requests documentation to material planning department.
  • Received and checked electronic components for import.
  • Perform troubleshooting and repairs on customer equipment.
  • Experience working in the electronic security industry.

Show More

46. CAD

low Demand
Here's how CAD is used in Electronic Assembly Technician jobs:
  • Worked with Mylar, Leroy inking, and occasional Generic CADD computer program.
  • Interpreted drawings and part lists along with evaluating and importing CAD data.
  • Fabricated cable harnesses per CAD specification Soldered PC boards and checked for quality Fabricated antennas from schematics.
  • Headed the department making educational trainer kits to be used in vocational schools and at the Naval Academy.
  • Corrected problems with mechanical / electrical CAD designs.

Show More

20 Most Common Skill for an Electronic Assembly Technician

Component Level12.1%
Final Product11.9%
Electrical Systems10%
PCB7.1%
Test Procedures6.7%
Circuit Boards6.4%
Trouble Shooting5.9%
Hand Tools5.8%

Typical Skill-Sets Required For An Electronic Assembly Technician

RankSkillPercentage of ResumesPercentage
1
1
Component Level
Component Level
9.9%
9.9%
2
2
Final Product
Final Product
9.7%
9.7%
3
3
Electrical Systems
Electrical Systems
8.2%
8.2%
4
4
PCB
PCB
5.8%
5.8%
5
5
Test Procedures
Test Procedures
5.5%
5.5%
6
6
Circuit Boards
Circuit Boards
5.2%
5.2%
7
7
Trouble Shooting
Trouble Shooting
4.8%
4.8%
8
8
Hand Tools
Hand Tools
4.8%
4.8%
9
9
Electronic Assembly
Electronic Assembly
4.6%
4.6%
10
10
SMT
SMT
4.2%
4.2%
11
11
Microscope
Microscope
3.1%
3.1%
12
12
Assembly Line
Assembly Line
2.4%
2.4%
13
13
Final Inspection
Final Inspection
2.4%
2.4%
14
14
Assembly Drawings
Assembly Drawings
2.4%
2.4%
15
15
Mechanical Assembly
Mechanical Assembly
1.7%
1.7%
16
16
Electronic Equipment
Electronic Equipment
1.5%
1.5%
17
17
ESD
ESD
1.5%
1.5%
18
18
ISO
ISO
1.4%
1.4%
19
19
Setup
Setup
1.3%
1.3%
20
20
Calibrate
Calibrate
1.3%
1.3%
21
21
Electro-Mechanical
Electro-Mechanical
1.2%
1.2%
22
22
Electronic Devices
Electronic Devices
1%
1%
23
23
IPC
IPC
0.9%
0.9%
24
24
Electronic Systems
Electronic Systems
0.9%
0.9%
25
25
GPS
GPS
0.9%
0.9%
26
26
Through-Hole Components
Through-Hole Components
0.9%
0.9%
27
27
Assembly Instructions
Assembly Instructions
0.8%
0.8%
28
28
BOM
BOM
0.7%
0.7%
29
29
Drill Press
Drill Press
0.7%
0.7%
30
30
Control Panels
Control Panels
0.7%
0.7%
31
31
Electronic Parts
Electronic Parts
0.7%
0.7%
32
32
Verbal Instructions
Verbal Instructions
0.7%
0.7%
33
33
Customer Specifications
Customer Specifications
0.7%
0.7%
34
34
Final Test
Final Test
0.7%
0.7%
35
35
QC
QC
0.6%
0.6%
36
36
Nasa
Nasa
0.6%
0.6%
37
37
Electronic Products
Electronic Products
0.6%
0.6%
38
38
Technical Support
Technical Support
0.6%
0.6%
39
39
QA
QA
0.5%
0.5%
40
40
AC
AC
0.5%
0.5%
41
41
Mil-Std
Mil-Std
0.5%
0.5%
42
42
Electrical Assembly
Electrical Assembly
0.5%
0.5%
43
43
ECO
ECO
0.5%
0.5%
44
44
PLC
PLC
0.5%
0.5%
45
45
R
R
0.5%
0.5%
46
46
CAD
CAD
0.5%
0.5%

10,864 Electronic Assembly Technician Jobs

Where do you want to work?