Electronic Installation Technician Skills

• Assisted in the assembly, installation, testing and maintaining electrical and electronic wiring equipment using hand tools and power tools.
• Use own hand tools, termination equipment and test equipment to provide best service possible.
• Required to be able to use power/ hand tools.
• Utilized experience of analyzing and comprehending units of measurement and operating power/hand tools to complete cabinet and closet system installations.
• Performed all tasks using basic hand tools, electric drill, 6' and 28' ladders, and signal meter.
• Work with hand tools, terminating blocks, internet components, high value electronics, Ethernet switch, home network configuration.

Show More

• Train personnel on proper use of communications electronic equipment.
• Installed mobile electronic equipment for customers.
• Repair of Car audio amplifiers, stereo's, and various other electronic equipment both board level and component level.
• Assisted in the removal / installation of electronic equipment, and the running of fiber optics cable.
• Installed video cameras Repaired electronic equipment Installed Dish and Direct T.V.
• Analyzed technical requirements of the customers desires to utilize electronic equipment, and perform installation and maintenance duties.

Show More

• Bid/designed/installed/maintained access control and CCTV systems for large multi-floor office buildings.
• Worked independently out of my house traveling wherever needed Monday-Friday to job-sites along the east coast installing/repairing CCTV security systems.
• Performed preventative and corrective maintenance on Vindicator security system, CCTV and PABX telecommunication system.
• Installed IP-addressable CCTV cameras for Central Illinois Regional Airport homeland security updates.
• Preformed technical maintenance for residential and commercial burglary and CCTV systems.
• Integrated non-contact temperature measurement control system via infrared CCTV systems.

Show More

• Installed computer systems to facilitate security, fire, access control and video surveillance systems.
• Managed job installation, construction and configuration of audio and computer systems for various levels of music educational programs.
• Installed multiple operating systems on server and workstation computer systems used in casino gaming with wireless electronic handsets.
• Coordinated and linked the computer systems within an organization to increase compatibility so information can be shared.
• Performed hardware maintenance on various Mil-spec and commercial desktop and laptop computer systems employed in Remote Operations Facility.
• Installed custom configured software packages on Compaq Computer systems for Government, Education, and Military customers

Show More

• Assisted Construction Manager with internal project closeout paperwork and data entry on SharePoint website for FAA Approval.
• Submitted post installation paperwork and site photos into SharePoint website for the FAA for approval of jobs.
• Scheduled and attended meetings with the FAA job completion approval and project closeout.
• Entered closeout documentation into a SharePoint website for the FAA approval.
• Scheduled site visits with the FAA for equipment delivery, removal of debris, environmentalabatements, and equipment removals.
• Verify Installations of FAA FTI telecom systems.

Show More

• Installed car audioequipment, remote starts, and security systems.
• Installed, maintained, and programmed computerized home security systems in a supervisory capacity as well as assistant.
• Verify security system for correct functionality and optimal performance and connections while identifying and correcting any issues.
• Licensed Alarm Technician to sell and install security systems in both residential and commercial applications.
• Installed residential and commercial security systems which included surveillance cameras and smoke alarm systems.
• Designed security systems that provided the highest quality protection for residential and commercial customers.

Show More

• Maintain the Preventative Maintenance Schedule for all HF, VHF and UHF equipment on board forward deployed vessel.
• Repaired and maintained the USS Kinkaid's communications suite including all UHF, VHF, and HF.

Show More

• Provided technical support and trouble shooting of equipment installation and systems light off and shut off.
• Understand and follow construction techniques and required hardware used in basic mobile and station equipment installations.

Show More

• Programed and set up GPS units inside vehicles.
• Instalied GPS based central office clock system.
• Drive to facilities to setup devices on offenders Assist Sheriffs and Probation with installation of GPS devices.
• Monitor GPS activity for maximum efficiency.
• Installed GPS systems and mobile electronics in a wide range of rental vehicles for Hertz while utilizing my vehicle wiring knowledge.
• Installed car stereo components, auto security, GPS, Satellite Radio, Cellular Telephones and accessories into motorized vehicles.

Show More

• Performed extensive troubleshooting of telecommunication systems.
• Provided and trained forward deployed military units with techniques for proficiently operating and troubleshooting various signals intelligence and satellite communication systems.
• Performed complex diagnosis, repairs, and modifications to aviation ground electronics, meteorological systems, and various communication systems.
• Fixed tactical data communication systems preventing loss of theater wide communications for personnel at remote fire bases.
• Tested and troubleshoot integrated voice/data communication systems used by the military and for air traffic control.
• Performed System Operation and Verification Testing for Electronic Surveillance and Communication systems.

Show More

• Design, Install, Service electronic access control systems, Close circuit TV Systems, Residential and commercial Alarm systems.
• Installed, tested, and repaired complex Fire Alarm Systems.
• Installed security cameras and alarm systems Read blue print Run cables
• Inspect and test electronic alarm systems - fire, security, access, etc.
• Install, program, service high-end commercial/ residential burglar alarm systems * Implemented NFPA and U.L.
• Assist with installation of security alarm systems to specified standards.

Show More

• Mold maintenance and various electrical/electronically work such as wiring and troubleshooting electrical systems and hot runner systems.
• Maintain electrical systems and equipment to ensure effective operation of system and services.
• Experienced with Bosch-Sony-Amag-Sentry-FSA-DSI- Galactic Enterprise and all other brands of electrical systems.
• Design validation testing of small engine electrical systems
• Troubleshooted electrical systems for missile launchers.
• Supervised and performed maintenance, inspection, integration and implementation of the MQ-1 Predator avionics, software and electrical systems.

Show More

• Determine whether existing test equipment can be utilized to meet specific testing requirements, or whether modifications are necessary.
• Designed and built test equipment for Copy Products, Thermal Printers, Health Imaging, and other lines of business.
• Skilled at soldering and the use of electronic test equipment.
• Operated various test equipment including oscilloscopes, monitors, multimeters, signal generators, and frequency counters.
• Perform technician duties in the Johnson Space Center Calibration/Test measurement and Diagnostic Laboratory performing calibration and repair of electronic test equipment.
• Perform and execute test set-ups utilizing electrical, and electronic test equipment required to simulate environmental conditions encountered in space flight.

Show More

• Adjust and replace defective or improperly functioning electronic components and or electronic cards.
• Soldered electronic components to electronic boards utilizing a schematic.
• Assemble electronic components for laser and rotary engraving machines.
• Handle the responsibility of test equipment and electronic components.
• Ordered and replaced necessary electronic components needed for repair.
• Procured, shipped and received electronic components and equipment.

Show More

• Provided training new customers on proper operation of newly installed and updated security systems and access controls.
• Installed and maintained commercial security camera and access control systems.
• Installed security and access control panels
• Install home audio, video, security cameras, Cellular Amplification, Access Control, Pre-Wire, Trim, Terminate cables.
• Design and installation of Closed Circuit TV security systems, Access Control, Computer assembly, repairs and upgrades, Networking.
• Install access control devices in commercial buildings such as door readers, door contacts, sounders, & motion sensors.

Show More

• Disassemble broken or defective equipment to facilitate repair and reassemble equipment when repairs are complete.

Show More

• Installed and troubleshot digital, communication equipment, RF systems and Local Area Network (LAN) systems.
• Experienced with system optimization including RF measurements using various test measurement.
• Programmed and performed component-level troubleshooting for microprocessor-based decoder boards and RF Receivers.
• Trouble-shoot RF circuitry using signal generator, spectrum analyzer and network analyzer.
• Performed electrical troubleshooting on RF equipment to determine product malfunction.
• Installed outlets, amplifiers when necessary only after determining the drop cable was not damaged or loosing, leaking RF.

Show More

• Assembled, tested, and maintained electronic components according to engineering instructions, technical Manuals, utilizing electronic troubleshooting techniques
• Skilled at reading/interpreting wiring diagrams, electrical schematics, electrical drawings, and technical manuals.
• Organized and formulated Technical Manuals for team to increase their productivity and job efficiency.
• Research technical issues that require research using equipment technical manuals and electronic test equipment.
• Tested and repaired systems and components using test equipment, technical manuals, drawings, and schematics.
• Utilize and interpret equipment technical manuals, schematics, and electronic test equipment to isolate faults.

Show More

• Study blueprints, schematics, manuals, and other specifications to determine installation procedures.

Show More

• Install aircraft navigation and communication equipment in general aviation aircraft.
• Key West, FL Maintained a 240 line item inventory of Tactical Satellite Communication Equipment.
• Install PBX communication equipment in US Government Facilities.

Show More

• Installed electronic systems in emergency, safety, and police vehicles.
• Install Computers and Routers in Police, Emergency and Recreational vehicles.
• Installed communication devices in utility and emergency vehicles.

Show More

• Use of security monitoring programs to track equipment activity for trouble shooting purposes.
• Assist telecommunications technicians or senior telecommunications technicians in trouble shooting and repairing communications equipment.
• Performed trouble shooting for customers and ensured customer satisfaction.
• Trouble shooting after installation to ensure proper operation.
• Trouble shooting electrical problems using proper diagnosis.
• Performed diversified functional test and trouble shooting operations.

Show More

• Scheduled and executed service calls.
• Provide exceptional customer service-Install Dish satellite television and broadband services-Multitask in order to maximize productivity at each installation-Troubleshoot and repair service calls
• Installed broadband internet service in residential and commercial establishments* Opened and closed office for business* Processed customer payments* Performed service calls
• Optimized customer experience and satisfaction through expert delivery of satellite services to Dish customers - performed installations and repair/service calls.
• Provided exceptional customer service during field service calls, consistently receiving high customer satisfaction ratings.
• Reduce service calls by inspecting customer equipment and making necessary equipment repairs.

Show More

• Configured LAN Laser Printers for network compatibility.
• Connect cable wires through ceiling to various locations within the units that is hooked up to LAN & WAN Based system.
• Served as technical consultant and point of contact to over 3000 LAN customers for computer and network issues or problems.
• Participated in the U. S. Air Force's first installation of an ATM LAN oriented toward video and telecommunications.
• Developed knowledge and proficiency for the planning, coordination and execution of all phases of LAN interconnect installation.
• Install, Test, Certify, and Troubleshoot Local Area Network (LAN) Cabling Systems Lay Out.

Show More

• Read schematics, troubleshoot and make repairs to component level.
• Conducted component level repair of analog and digital electronic systems using technical documentation and a wide variety of electronic test equipment.
• Utilized technical manuals, trouble-shooting to component level, along with parts cross-reference material to achieve maximum cost effectiveness of repairs.
• Performed production, test, and repair of military electronics including synthesizers and phase shifting technology down to micro-component level.
• Performed component level troubleshooting for manufacturing and engineering teams on flagship oil refinement UNIX mini-computer system boards.
• Performed component level debugging of new and production and field return failures of WaveFrame's Digital/Audio recording systems

Show More

• Experience in writing inventory tracking and quality control documentation in accordance with our ISO certification.
• Implemented policies and procedures for the company to obtain an ISO 9001 certification.
• Participated in the initial ISO 9000 certification of a major customer.
• Incorporated International Organization for Standardization 17025 and 9001 regulations, preventing minor/major non-conformances during ISO audits.

Show More

• Help write and maintain test programs for the huntron tracker.

Show More

• Install or replace machinery, equipment, and new or replacement parts and instruments, using hand or power tools.

Show More

• Mounted Plasma TVs and installed AV equipment, wiring, and screens to structure.
• Installed/tested high-end AV equipment and computer networks for presentation systems.
• Act as consumer/commercial AV and surveillance systems designer/installer.
• Maintained all AV equipment in proper working order by following manufacturer and installed guidelines for cleaning, preventative maintenance and repairs.
• Assist the Custom Installation Lead Installer in the installation and calibration of AV and networking equipment in homes and businesses.
• Performed the installation of commercial AV equipment in conference rooms, boardrooms, classrooms and large meeting spaces.

Show More

• Pulled and terminated RG6, RG59coaxial and CAT5 twisted pair cable.
• Repaired/installed cat5e computer drops and related equipment.
• Install required cabling to DSX-3 jacks, Optical bulkhead Ports, OSSNET required cat5 connections 6509 routers and Patch Panel connections.
• Connected CAT5 cables to cameras, motion detectors, door contacts, window contacts, and control panels.
• Test all Cat5e cables through various testing mediums and ensure the data was accurate and well documented.
• Routed cat5 circuits from telecommunications closet to termination point and terminated and tested these circuits as well.

Show More