Electronic instrument technician jobs near me - 169 jobs

City/Cities: Columbus Travel Required: 00% - 25% No Shift: Third Shift (United States of America) The Coca-Cola Company. Our vision is loved brands, done sustainably, for a better shared future. We strive to provide cutting-edge excellence in ingredients, innovation, design and marketing. As a Instrumentation, Automation, Controls Technician you will be responsible for the overall upkeep, troubleshooting, preventative care and repair of our mechanical systems and manufacturing equipment. Additionally, you will exhibit a sound knowledge of Motor controls, VFD's, instrumentation, PLCs and Graphical Terminal Interfaces. Key Responsibilities and Job Duties Responsible to man Motor controls, VFD's, instrumentation, PLCs and Graphical Terminal Interfaces. Lead maintenance activities for assigned shift, which includes assign, re-assign and direct preventative maintenance activities. Perform installation and troubleshooting of Motor controls, VFD's, instrumentation, and graphical terminal interfaces. Ensure adherence to preventive maintenance systems for all production equipment and/or batching/processing equipment, including audits/verification of execution of predictive and preventative maintenance practices for all production equipment and systematic preventative maintenance, including electrical or mechanical adjustments, inspections and minor repairs. Act as a resource for mechanics in identification and correction of potential equipment problems and troubleshooting and maintaining production lines and/or batching/processing equipment. Properly perform all necessary maintenance tasks to production lines (i.e. rebuilds, welding, valve, pipe and solenoid selection, etc.). Maintain accurate records and logs as required. Adhere to Good Manufacturing Practices (GMPs) in the execution of the work schedule. Ensures the area is maintained in a clean, safe, and orderly fashion. Maintain proper safety conditions of equipment including immediately correcting or reporting safety issues to your supervisor. Perform quality checks and accurate quality documentation as required. Actively assist with planning/scheduling and storeroom staff for tracking work orders, parts, and purchase requisitions. Identify and assist in the implementation of projects as required. Education and Additional Requirements Technical School or position related training Minimum 5 years manufacturing maintenance experience Minimum 5 years equipment reliability experience Hydraulics, controls, electrical, mechanical, welding, electrical, PLC's, and pneumatics experience Own & supply own tools per the Maintenance required tool list Ideal candidate will possess working knowledge of data network, switches, routers and servers Must be able to work flexible shift schedules up to 12-hour shifts as determined by business need Must be able to use a computer and associated software programs Experience with SCADA, board-level troubleshooting, and software systems The Coca-Cola Company will not offer sponsorship for employment status (including, but not limited to, H1-B visa status and other employment-based nonimmigrant visas) for this position. Accordingly, all applicants must be currently authorized to work in the United States on a full-time basis and must not require The Coca-Cola Company's sponsorship to continue to work legally in the United States. Skills: Pay Range: $83,200 - $130,000 Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Our Purpose and Growth Culture: We are taking deliberate action to nurture an inclusive culture that is grounded in our company purpose, to refresh the world and make a difference. We act with a growth mindset, take an expansive approach to what's possible and believe in continuous learning to improve our business and ourselves. We focus on four key behaviors - curious, empowered, inclusive and agile - and value how we work as much as what we achieve. We believe that our culture is one of the reasons our company continues to thrive after 130+ years. Visit Our Purpose and Vision to learn more about these behaviors and how you can bring them to life in your next role at Coca-Cola. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. When we collect your personal information as part of a job application or offer of employment, we do so in accordance with industry standards and best practices and in compliance with applicable privacy laws.

LyondellBasell is a leader in the global chemical industry creating solutions for everyday sustainable living. With a nearly 70-year legacy that includes a Nobel Prize in Chemistry and our proprietary MoReTec recycling technology, LYB is enabling a more sustainable future for generations to come. LYB develops high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. LYB places high priority on diversity, equity and inclusion and is Advancing Good with an emphasis on our planet, the communities where we operate and our future workforce. We're addressing the global challenges of ending plastic waste, taking climate action, and supporting a thriving society, while generating value for our customers, investors, and society.Come Join an Inclusive Team This position provides electrical, instrument and analyzer inspection and optimization/repair activities in compliance with applicable national and regional codes, standards and regulations in order to maintain plant on stream time while increasing plant reliability. Maintenance activities must be performed safely and efficiently to high quality standards. The technician must be able to function at a high level in a multi-craft environment.A Day in the Life * Use proactive Hazard Recognition techniques to work safely at all times and actively support the plant safety process.• Follow and know the plant policies and procedures.• Be available to work overtime and duty weeks.• Have strong analytical skills to systematically troubleshoot and repair electrical equipment and instrumentation including • AC and DC motor circuits, up to and including the motor and drive• Lighting and electrical circuits up to 480V• Complex control relay and PLC logic problems• Control valves and associated component problems• Complex instrumented control and indicating loops for pressure, flow temperature, differential pressure, level and volume• Electrical power distribution systems using the proper tools and safe work practices• Communication and alarm systems• Perform routine electrical construction tasks for equipment installation and commissioning• Calibrate and configure pneumatic and smart electronic instruments You Bring This Value * A High school diploma or equivalent required• Able to read electrical schematics and diagrams• Basic computer software and hardware familiarity• Experienced with Electrical/Instrumentation/Analyzer diagnostic test and measurement tools• Skilled in basic mathematics including first-level algebra • Good communication skills• High commitment to the craft, willing to learn and accept new challenges• Self-starter and capable of leading formal or informal work groups• Knowledgeable on safe use of various hand and power tools; ability to perform under adverse conditions such as heavy lifting, cramped working conditions, extremes in weather conditions, confined spaces, elevated heights and noisy areas.• Successful candidate will possess strong analytical skills, a strong electro-mechanical aptitude and a willingness to work cooperatively with others in order to solve complex instrumentation, electrical, and process problems, as well as build mutually beneficial work groups.• Other personal qualities essential for success are a desire to share knowledge and experience, self-motivated, seeking and accepting accountability for individual actions and a desire to achieve superior technical and interpersonal outcomes. Preferred Qualifications• An associate degree in instrumentation or electrical is preferred.• 5 years of hands-on electrical and instrumentation maintenance experience in chemical or oil refining.• NCCER Instrumentation or Electrical certification is preferred.What We Offer LyondellBasell is proud to provide a competitive total compensation package designed to reward excellence and support the well-being of our employees. Our Total Rewards package includes equitable and market-competitive base pay as well as locally relevant incentives, fostering a culture of pay-for-performance that recognizes both individual and company achievements. We extend the following benefits to *eligible employees: Workplace Flexibility: The Company's Global Remote Work Policy allows eligible employees to request to work remotely up to two full days per standard work week at an approved location other than the designated worksite or office, such as at a home office with managerial approval. Comprehensive Health, Welfare, Life and Retirement Programs: Our comprehensive programs are aligned with local practices. 6% LYB match on 401(k) contribution 5% LYB cash balance pension plan accrual Comprehensive Well-being Benefits: Programs to support your physical, mental, financial, and social health, ensuring you receive the care you need, when you need it. Employee Stock Purchase Plan: The LYB ESPP offers a 10% discount on LYB stock for eligible employees in Germany, Italy, Netherlands, Spain, and US. Educational Assistance Program: To encourage self-development by providing financial aid for approved educational activities voluntarily undertaken by employees. Bravo Rewards Program: Recognizing outstanding employee contributions. Robust Medical and Life Insurance Packages: Offering a variety of coverage options to meet individual needs. Professional Development: Opportunities to learn and grow through training, mentoring, work experiences, community involvement, and team building activities. Competitive Vacation Policies: Generous annual leave to support your work-life balance. Global Adoption Policy: Support for employees expanding their families. Matching Gifts Program: Enhance the impact of your charitable contributions to qualified organizations. * Eligibility for certain benefits and rewards programs will vary based on your job status, work location and/or the terms of any applicable collective bargaining agreement and may be changed from time to time without notice, subject to applicable law.Competencies Build PartnershipsDrive InnovationGrow CapabilitiesPromote InclusionMotivational FitTechnical SkillsDeliver ResultsLearn more about our benefits: Benefits/Health & Welfare | LyondellBasell Stay Connected! Visit our LYB Website Follow us on LinkedIn and Instagram Like us on Facebook Subscribe to our YouTube channel LyondellBasell is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, disability, age, veteran status, and other legally protected characteristics. The US EEO is the Law poster is available here.LYB is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need assistance or an accommodation related to LYB's recruiting process, please email us at ***************. Applicants must be at least 18 years old.LyondellBasell does not accept or retain unsolicited résumés or phone calls and/or respond to them or to any third party representing job seekers.Privacy Statement: For information regarding how LyondellBasell processes your personal data, please read our Privacy Statement.

Greif is a global leader in performance packaging located in 40 countries. The company delivers trusted, innovative, and tailored solutions that support some of the world's most in demand and fastest-growing industries. With a commitment to legendary customer service, operational excellence, and global sustainability, Greif packages life's essentials - and creates lasting value for its colleagues, customers, and other stakeholders. Learn more about the company's Customized Polymer, Sustainable Fiber, Durable Metal, and Integrated Solutions at ************* and follow Greif on Instagram and LinkedIn. OUR VISION: Being the customer service company in the world. OUR PURPOSE: Creating packaging solutions for life's essentials. Job Requisition #: 033094 Electrical and Instrumentation Technician (Open) Job Description: Multi-Craft Instrument Tech - E&I Position Summary The E&I Technician performs electrical and instrumentation maintenance activities and projects. They are skilled in the fabrication, installation, inspection, testing, adjustment, and repair of electronic, electromechanical, and pneumatic control circuits and systems. These systems record, indicate, and control the operation of various machines, including process measurement and control instrumentation. Pay: $43.26/hour Benefits include: Medical, Dental, Vision, 401k, Vacation Essential Duties & Responsibilities The E&I Maintenance Technician will conduct preventative and corrective maintenance of electrical equipment and troubleshoot circuit problems while applying theory and related knowledge to install, rebuild, or repair electromechanical equipment. Attend Company Sponsored Training Participate in RCA and Safety Improvement Teams Endeavor to increase their skill levels through additional training. Install, maintain, and repair industrial control systems and power distribution systems, including electric motors, motor control devices, and variable-speed drives. Maintain water and wastewater instrumentation, including analytical, flow, pressure, and level transmitters. Maintained computer equipment, DCS, telemetry (SCADA) system, HMI software, PLC, fiber networking, and process systems. Work with an electrician to install new equipment, including conduit and wiring. Responsible for preventative maintenance and calibrating all electrical, instrumentation, and process equipment. Maintain accurate equipment files such as maintenance and inventory logs, manuals, and blueprints. Technical knowledge of motor control circuits Read and understand manuals, blueprints, and schematics. Communicate information both verbally and in writing. Effectively troubleshoot and resolve issues. Complete tasks of lower Maintenance Levels Minimum Qualifications High school diploma or GED, Five years of education, training, and/or combination #L1-TC1 At Greif, we believe that our colleagues are the center of our success. Our Total Rewards have a comprehensive focus on well-being and offer a competitive package that enables you to thrive, be engaged, and reach your full potential. Compensation Range: The pay for this position is $43.26 per hour. The position may also be eligible for a short-term incentive. Benefits Statement: Greif offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits which are available for eligible colleagues effective day one. Protect Yourself From Scams: We value the integrity of our recruitment process and prioritize the well-being of our candidates. While you may find Greif job postings on various platforms, all legitimate opportunities can be verified on our official Careers page at ************* . All communication from Greif regarding job opportunities will also come from ************* email address. If you have concerns about the legitimacy of a job posting, receive an unsolicited job offer or suspect fraudulent activity, please contact us for verification via this link Contact Us - Greif . EEO Statement: https://*************/wp-content/uploads/2023/04/HR-101-Equal-Employment-Opportunity-Policy-English.pdf We offer a competitive salary, excellent benefits and opportunity for growth. Greif is an equal opportunity employer. We will not discriminate against any applicant or employee on the basis of sex, race, religion, age, national origin, color, disability, veteran status or any other any other legally protected characteristic. For more information read Greif's Equal Opportunity Policy.

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Electrical Technician 2 Location: Columbus Plant - Columbus, OH Excellent Benefits : Medical, dental, vision and retirement savings (401k) Hours of work: 7 day/week operation with rotating shifts 8-12 hours The Electrical Technician is responsible for maintaining, troubleshooting, calibrating, and repairing all electrical, electronic, and instrumentation systems within the Plant. During periods of inactivity, the Electrical Technician will work with other members of the crew to support the self-directed activities of the Plant. Duties and Responsibilities (not limited to) Inspection, repair, installation, and overhauling of equipment throughout the Plant as well as building and physical structure maintenance Maintaining PLCs for various equipment throughout the plant including but not limited to configuring new data points, modifying existing programs, and adding logic for the control of new equipment Inspection, repair, installation, and overhauling of equipment throughout the Plant as well as building and physical structure maintenance Knowledge of all maintenance tasks for all operational and warehouse procedures within the Plant Develop and maintain daily communication with the process operators to determine if the unit has any mechanical or electrical maintenance issues Perform and document routine inspections of equipment to determine necessary action, prepare work orders, and document completely and accurately Participate in safety audits, safety meetings, and incident investigations, as necessary Maintain housekeeping in all work areas Install equipment and machinery, as necessary Maintain all maintenance shop equipment tools in safe and proper condition Perform various preventative maintenance tasks, such as cleaning, and lubricating machinery and/or equipment Assist in the training of new maintenance employees Qualifications A one-year certificate from college or technical school is required (Industrial Electric & Programming) 2-3 years of industrial electrical experience is required 2 years of industrial electric plant experience is preferred About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Job DescriptionDescription: Davenergy Solutions is a rapidly growing, profitable company, headquartered in San Diego, CA. Our employees are the key to maintaining our competitive edge. To attract and retain the best industry talent Davenergy shares its success with its employees and is committed to providing a professional work environment where learning, growth and recognition career are highly valued. If you are seeking an opportunity to work in a progressive organization that will offer you diversified challenges and an excellent opportunity for advancement please review our current employment opportunities. For more information about Davenergy and open positions please visit our website at ****************** Davenergy is seeking a remote full-time Professional Field Electrical Technician to join our dynamic and growing engineering consulting practice. We are looking for motivated candidates who can grow with this department. The selected applicant will conduct commissioning, retro-commissioning, engineering feasibility analysis, electrical studies, field arc flash data gathering, and field data collection assistance services on a variety of building types. Experience performing electrical systems testing, and existing electrical system data collection is a requirement for applying to this position. This position will require you to perform field inspections of government, commercial, industrial, manufacturing, and institutional properties. You will collect relevant information to help perform existing condition assessments, electrical one line documentation, arc flash studies, and to provide recommendations for critical power upgrades. The ideal candidate will be adaptive to working with all property types, and knowledgeable about a variety of electrical distribution systems. The successful candidate may also be expected help perform commissioning activities, construction verification, and field functional testing. Depending on project capacity, this candidate may also be expected to assist in limited mechanical design field verification. Requirements: Site survey and analysis Commissioning of new construction buildings Critical power and infrastructure testing and assessment Arc Flash analysis and associated data collection Facility circuit tracing and verification An understanding of and experience with a variety of electrical distribution systems Ability to read and understand electrical system documentation to include on-line drawings, and electrical schematics Experience with medium voltage and low voltage power distribution Familiarity with NFPA, NEC, NETA, and IECC standards Working knowledge of building systems (HVAC, Plumbing, IT/Com, ect.) Excellent report writing skills, computer and internet skills Excellent communication and management skills Excellent time management and organizational skills Ability to complete assignments on-time and within budget Ability to travel on short notice (1 week or less) Communication, Language, and Software Skills: Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy. Ability to exercise good interpersonal skills. Educational Requirements: High School Degree, Electrical Safety Course Benefits 401(k) Annual Profit-Sharing contribution to 401(k) 10 Paid Federal Holidays Health Insurance Dental Insurance Paid Time Off Optional Benefits Accident Coverage Vision Insurance Short Term Disability Long Term Disability Term Life Insurance Medical Bridge Critical Illness

Competitive Pay: This position offers an hourly wage ranging from $20.00/hr. to $30.00/hr., depending on experience and qualifications. OTC Industrial Technologies is seeking an Electrical Technician to support our customers through expert installation, troubleshooting, and repair of industrial electrical systems. This role combines panel building in our shop with on-site work at customer sites, where you'll handle everything from routine preventive maintenance to urgent, complex repairs. We're looking for someone who is detail-oriented, safety-focused, and eager to learn, with the ability to work in a fast-paced environment and adapt to changing priorities. If you thrive on solving problems and take pride in delivering high-quality work, you'll fit right in. What You'll Love * Competitive Pay: This position offers an hourly wage ranging from $20.00/hr. to $30.00/hr., depending on experience and qualifications. * Overtime availability for extra earning * Task variety-from routine PMs to urgent "fix-it-now" challenges. * A strong, supportive team where collaboration and learning are part of every day * Exposure to DIRECTAIR, one of the most innovative solutions in the industry. What You'll Do: * Assist in performing installation, testing, and repair of all industrial related electrical and electronic equipment utilized in manufacturing plants or distribution systems. This equipment includes, but is not limited to VFD's, soft starters, and MCC's. * Arrive on time and prepared to work on a daily basis. * Assist in running conduit for new installations, pull wire and make terminations. * Customer Service * Maintain high quality work standards. * Assist with equipment installation, wiring, start-up, and troubleshooting techniques. What You'll Need: * Highly motivated with interpersonal skills to effectively work in a collaborative team environment. * Electrical, instrumentation, controls, technical training, or equivalent education or experience a plus but not required. * Experience in the water/wastewater or mining industry a plus but not required. * Ability to comply with all company policies and procedures. * Ability to complete required safety training classes and comply with OSHA, MSHA or any authority having jurisdiction. * Must have the ability to complete tasks and assignments in a safe and environmentally responsible manner. * Must be prepared to take direction from multiple senior coworkers and be willing to learn and grow your skill set on a daily basis with an eye on a long term career in the industrial field. Why Join OTC Industrial Technologies? * Comprehensive Benefits: Our benefits package includes medical, dental, and vision care coverage, short-and long-term disability coverage, and life insurance. We also offer a wellness discount and a stipend for safety shoes & glasses. * Financial Security: We provide a 401(k) savings plan with an employer match of 50% on the dollar up to 6%, robust referral bonuses, and relocation assistance. * Work-Life Balance: Enjoy paid time off (PTO) and tuition assistance to support your career growth and personal life. * Career Growth Opportunities: At OTC Industrial Technologies, we believe in investing in our employees' development. We offer various training programs and career advancement opportunities to help you reach your full potential. At OTC Industrial Technologies, we believe that our employees are our greatest strength. Through investment in our people and growth from within, we believe in providing you with a wide variety of opportunities to accelerate your career potential as you help us drive change to move our business forward. For over 60 years, employing and developing the best-in-class talent has been at the forefront of our success. By coupling our teams' hands-on experience with a wide range of products from top vendors, we provide customers with the best quality products and technical application expertise and services at the lowest possible costs. Working with OTC Industrial Technologies is perfect for purpose driven individuals who are motivated to be part of an exciting transformational company.

An electrical technician installs, troubleshoots, maintains and repairs electrical systems and components of industrial machinery, equipment and building systems following electrical code, manuals, schematic diagrams and other specifications using hand tools, power tools, computers and electrical test equipment. This client designs, manufactures, and markets absorbent hygiene products. The company sells adult incontinence and infant diapers, among other products, into the healthcare, retail, and direct-to-consumer channels under brands including Attends, Indas, and Comfees as well as a wide range of private label brands for retailers. We seek the best people to drive our business to the next level. We offer comprehensive benefits package which includes health, life, dental and vision plans, and a 401K. In addition, we offer paid holidays, paid vacation, and tuition reimbursement. We also offer a clothing allowance, steel toed shoes and prescription safety glasses allowance and employee discounts on insurance, cars, travel, computing, cell phones and more! Responsibility : Minimum qualifications to be considered for this great opportunity: • Associates degree or higher with a minimum three years manufacturing experience • Demonstrated oral and written communication skills • Experience in reading and updating building and machine control electrical schematics • Experience in bending and installing conduit up to ¾” diameter • Background in plant electrical and mechanical systems • Experience with electro-mechanical equipment and systems • Experience with analytical troubleshooting • Experience using oscilloscopes, chart recorders and thermal imaging cameras and interpreting results • Experience with material web guides (E&L or FIFE) • Experience with CIJ printing (VideoJet, Marsh or Matthews) • Experience with ultrasonic bonding technologies o Experience in troubleshooting machine communication networks including DeviceNet, ControlNet, Profibus, Ethernet, DH+ and ASI • Experience using PLC systems and ability to use software to trouble shoot Qualification : Preferred additional qualifications • Experience using Siemens and Allen Bradley PLC systems • Experience using PLS/ECAM systems • Experience with metal detectors • Experience with hotmelt adhesive systems • Experience with PID loop tuning for desired control response • Experience with AC and DC motor systems • Experience with motion control technology, especially Indramat, Allen Bradley and Siemens based systems • Experience with operator interface systems like HMIs and marquees • Experience with vision system technology, especially camera based inspection systems and programming software Major Duties and Responsibilities • Adhere to all safety procedures and policies including LOTO and arc flash • Maintaining accuracy of electrical schematics • Design, install and implement new control systems as needed or redesign equipment as necessary to eliminate ongoing issues • Replace failed interior and exterior lights • Troubleshoot issues with equipment web guiding systems, dust collection systems, PLS/ECAM systems, metal detection systems, elastic unwind systems, SAP delivery systems, ultrasonic bonding systems, CIJ printing systems, machine communication networks, stretch wrapping equipment, spooling and despooling equipment, hotmelt adhesive equipment, packaging equipment, AC and DC motor systems • Troubleshoot issues with and make changes to Siemens and Allen Bradley PLC programs • Troubleshoot issues with and make changes to Siemens, Allen Bradley and Indramat motion control programs • Troubleshoot issues with and make changes to HMIs and marquees • Troubleshoot hardware issues with vision inspection equipment • Provide maintenance support to multi-discipline manufacturing processes with respect to machinery and equipment • Perform repairs and calibration of electronic equipment and preventative maintenance on a wide variety of electro-mechanical equipment using standard test procedures • Troubleshoot and repair electrical issues for the building and equipment • Perform daily electrical audits • Represent the E&I team in the Safety Meetings when required • Other duties as assigned #LI-HB1

Responsibilities Ensure compliance with the site cardinal safety rules and with all safety aspects in the execution of work. Complete field level risk assessments. Safely perform the following. calibration checks of field instrumentation stroke test of pneumatic, hydraulic and motor-operated valves loop-checks and troubleshooting (I/O (Input/Output) checking and troubleshooting) fiber optic panels wiring against IFC drawings and red-lining/as-building as required cause and effect matrix checks interlocks, alarms, & controls performance verification installation inspection against design documentation completion of approved commissioning check sheets Use of calibration and testing instruments to inspect, test and perform troubleshooting and diagnose faults. Communicate design discrepancies and design issues. Adhere to standards of Health, Safety and Environmental (HSE) and comply with the Clients Company Health, Safety & Environment Management (HSEM) System requirements; takes reasonable care of own health and safety and that of others in the workplace. Follows and maintains Company standards of Quality in accordance with Company Quality System requirements Qualifications Valid Driver's License 3+ years of field operations experience in the oil/gas industry SCADA & PLC knowledge/experience preferred Ability/willingness to travel 10% of the time I&E maintenance and project experience Able to read P&IDs, ISOs, Plot Plans, etc. Extensive working knowledge of field operations, construction operations Ability to handle multiple projects Strong planning and organizational skills. Strong computer skills, Word, Access, Excel, etc.

Amentum is seeking an Electronics Technician B for a position on Kauai, HI to independently or under minimum supervision and assignment from Lead Technician, provide contracted operational and maintenance support services to the Pacific Missile Range Facility (PMRF) customer. Electronics Technician responsibilities encompass, operating, maintaining, troubleshooting, repairing, calibrating, modifying, testing and installing telecommunications systems and associated networking components and cabling. Technician should be experienced in telecommunications technologies for voice, video and data systems or their industry equivalents that are assigned to PMRF communications facilities and assets. Responsibilities Specific assignments and responsibilities include but are not limited to the following areas: Sets-up, checks-out, operates, monitors, and maintains systems and equipment for Range Operations support. Responds to evolving operational environments requirements when directed. Perform periodic inspections and maintenance tasks in accordance with published procedures and/or OEM guidelines. Documents results of all maintenance actions in systems and equipment records. Perform troubleshooting and repair of systems/equipment by reading and interpreting electronic/mechanical schematics and using simple and complex tools and test equipment. Install, check-out, and or bench test, calibrate and perform acceptance tests on new and relocated systems and equipment, as directed. Perform Communications Security (COMSEC) functions including accounting, loading, and destruction and courier services for classified cryptographic materials and items. Maintain Telecommunications Inside Cable Plant and Major Battery Back-up Systems. Occasional travel for operations and maintenance support at other locations throughout the State of Hawaii to include at sea for extended periods. Performs other duties as required. Working Environment/ Physical Activities Environment Electronics Shop and Radio Frequency field environments Operations Command & Control Center Travel to and work at remote site locations to include at sea for extended periods. Physical Activities Must be able to lift, carry, install and remove electronics equipment and peripherals up to 50 lbs. Must be able to climb elevated towers and work in sub-floor areas and crawl spaces in performing maintenance inspections and troubleshooting tasks. Positions: Walking/Standing; Crawling & Kneeling; Repeated Stooping; Sitting; Climbing Pushing/ Pulling: Over 50lbs Environmental: Customer Contact; Extended Work Day; Confined Work Area; Office Laboratory; Field Assignment; Inclement Weather Minimum Qualifications Education High School or equivalent AS Degree in related field or equivalent training, e.g. 2 Year Technical School or Navy "A" school with either school specializing in Basic Electricity and Electronics Systems. Soldering certificate or equivalent training inclusive within curriculum of a technical school such as a Navy A school or from a commercial firm. Experience Five years of progressive experience in a related field with a minimum of two year's experience operating and maintaining telecommunications for voice, video and data along with related networking systems and equipment. Radio Frequency (RF) to include but not limited to Transmission & Antenna systems for Ground Radio, Microwave, Satellite, and other associated telecommunication technologies. Telecommunications Inside Cable Plant, Main and Intermediate Distribution Frame and Cable Record keeping. Major Battery Back-up and power distribution system experience desired. Must be able to use and interpret the results of test equipment used in telecommunications, video and networking fields such as O-scopes, RF Power meters, Analyzers, Voltage multi-meters, Bit Error Rate Testers (BERT), Time Domain Reflectometers, Toners/Tracers Basic Electricity & Electronics theory and applications with emphasis in telecommunications and network troubleshooting and repair. Proficiency in reading and interpreting schematic diagrams for troubleshooting and repair. Must have a soldering certificate or equivalent training from a commercial firm, technical school or Navy school. Must be familiar with OSI 7 Layer model. Windows based OS and LINUX platforms Must possess the following PC skills: Word; Excel; Outlook, Power Point; Windows Security Clearance Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain and maintain a Secret Clearance. Applicants selected either must currently possess a Secret clearance or will be subject to a US Government Security Investigation and must meet eligibility requirements to obtain clearance prior to commencement of employment and maintain a security clearance for access to classified information or Closed/Restricted Areas throughout duration of employment. Compensation The hourly rate for the position is $47.84 per hour. (Hourly rate set by CBA/SCA). Benefits Amentum offers the following benefits for this position, subject to applicable eligibility requirements: medical, dental and vision insurance, 401(k) retirement plan, life insurance, long term and short term disability insurance, 10 days of paid time off, 10 days paid sick and safe time. This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: Please visit our career site: *********************** Compensation Details: 47.84 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax-saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 01/06/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Sweve Tech Limited is seeking a motivated Electronics Technician who can work effectively in a remote capacity, while also traveling to company location, client sites, and vendor facilities as needed. This role is critical in providing installation assistance, troubleshooting, maintenance support, and calibration services. The ideal candidate will be hands-on, eager to learn, and committed to delivering high-quality technical services. Key Responsibilities: 1. Installation Assistance: - Support the installation of electronic systems and equipment at, office, clients and vendors locations. - Assist senior engineers during setup and commissioning of Sweve Tech systems. 2. Troubleshooting and Maintenance Support: - Diagnose and resolve issues with electronic equipment both remotely and onsite. - Provide timely maintenance support to minimize downtime and optimize equipment performance. - Respond to customer inquiries for technical assistance, offering clear and accurate solutions. 3. Calibration Services: - Perform calibration of electronic systems and devices to ensure accuracy and reliability. - Maintain records of all calibration activities, ensuring compliance with industry standards. 4. Documentation: - Create and update service reports, technical manuals, and maintenance logs. - Document all troubleshooting steps and solutions for future reference. - Maintain accurate records of all service and installation activities. 5. Travel and Remote Work: - Work remotely with occasional travel to client sites, vendor facilities, and company locations as needed. - Coordinate with the technical team to schedule service visits and ensure timely completion of tasks. Qualifications: - Education: - High school diploma or equivalent required. - An associate degree or technical certification in electronics, instrumentation, or a related field is a plus. - Experience: - Previous experience in electronics, such as internships, vocational training, or hands-on work, is preferred but not required. - On-the-job training will be provided to candidates willing to learn and grow in the field. - Technical Skills: - Basic understanding of electronic systems, circuitry, and troubleshooting techniques. - Familiarity with calibration procedures and maintenance practices is a plus. - Soft Skills: - Strong communication skills, with the ability to explain technical concepts clearly. - Detail-oriented with excellent organizational skills. - Ability to work independently and manage time effectively in a remote setting. - Other Requirements: - Flexibility to travel as needed, including potential overnight stays. - Valid drivers license and reliable transportation for site visits. What We Offer: - Competitive salary with opportunities for career advancement. - Comprehensive training and development programs. - Flexible remote work arrangements with travel allowances. - A supportive team culture focused on innovation and customer satisfaction. Join Sweve Tech Limited as an Electronics Technician and be part of a forward-thinking company that values skill development and teamwork. This role is perfect for those looking to build a career in electronics while enjoying the flexibility of remote and on-site work. Apply today to take the next step in your technical career! Job Type: Full-time Pay: $33.00 - $39.00 per hour Schedule: Monday to Friday About Us Sweve Tech Limited is a leading engineering and consulting company specializing in electrical, electronics, Civil, Mechanical Engineering, Project Management, renewable Energy solutions and Urban Planning. We deliver top-tier solutions for installations, troubleshooting, and maintenance across multiple regions. We prioritize innovation, quality, and efficiency, fostering a collaborative environment where our team can thrive. Benefits of Working as an Electronics Technician - Competitive salary - Flexible remote work options - Comprehensive training and career development - Health insurance and wellness programs - Paid time off and holidays - Retirement savings with company match - Travel opportunities (domestic and international) - Career growth with promotion from within - Supportive and collaborative work culture Join Sweve Tech Limited to advance your career while enjoying industry-leading benefits and growth opportunities.

Highway Patrol Electronic Technician 1 (250007FL) Organization: Public SafetyAgency Contact Name and Information: Kate Veeley | ********************* Unposting Date: OngoingWork Location: HP Alum Creek Facility 1583 Alum Creek Drive Columbus 43209Primary Location: United States of America-OHIO-Franklin County-Columbus Compensation: $26.25 - $31.95 per hour Schedule: Full-time Work Hours: See Work Hours BelowClassified Indicator: ClassifiedUnion: OSTA Primary Job Skill: Telecommunication SystemsTechnical Skills: Basic Documentation, Communications, Telecommunication Systems, Electrical Engineering, Electrical TradeProfessional Skills: Analyzation, Attention to Detail, Listening, Problem Solving, Written Communication Agency Overview Ohio State Highway PatrolIs an internationally accredited agency whose mission is to protect life and property, promote traffic safety and provide professional public safety services with respect, compassion, and unbiased professionalism. Job Description Ohio Department of Public Safety - Ohio State Highway PatrolReport In Location - 1583 Alum Creek Drive, Columbus 43209Work Hours: Choice of 6:00am - 2:00pm OR 7:00am - 3:00pm THIS POSTING IS FOR APPLICANTS TO APPLY TO BE PLACED IN A POOL OF CANDIDATES TO BE CONSIDERED FOR CURRENT AND FUTURE POSSIBLE OPENINGS AT THE LOCATION NOTED. Perks of Working for the Ohio Department of Public SafetyMultiple pay increases over the first years of service!Free Parking!Under the direction & guidance of higher-level Highway Patrol Electronic Technician, clean, install, repair, & maintain basic electronic & communication equipment:Install all RF mobile & portable electronic equipment, various electronic equipment, various wiring harnesses, various storage boxes, trays, consoles &/or cages into Ohio Department of Public Safety (ODPS) staff vehicles, Ohio State Highway Patrol (OSHP) vehicles, &/or vehicles for other state agencies, which may contain secured ammunition &/or firearms.Perform final inspection of all items listed above & on all electronic equipment installed in vehicles for accuracy & completeness.Test, repair, &/or refurbish electronic equipment & various wiring harnesses; Repair electronic testing equipment used for monitoring & adjusting.Monitor & correct any frequency modulations & power output according to Federal Communications Commission (FCC) rules & regulations.Log repairs performed & adjustments to equipment per FCC guidelines.Click here to see full position description Why Work for the State of OhioAt the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees*. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: Medical Coverage Free Dental, Vision and Basic Life Insurance premiums after completion of eligibility period Paid time off, including vacation, personal, sick leave and 11 paid holidays per year Childbirth, Adoption, and Foster Care leave Education and Development Opportunities (Employee Development Funds, Public Service Loan Forgiveness, and more) Public Retirement Systems (such as OPERS, STRS, SERS, and HPRS) & Optional Deferred Compensation (Ohio Deferred Compensation) *Benefits eligibility is dependent on a number of factors. The Agency Contact listed above will be able to provide specific benefits information for this position.QualificationsOption 118 mos. exp. in installation, repair & workings of mobile communication equipment or vehicular electronics; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. Option 2-Or completion of 2 yr. technical program in electronics or radio communications; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. Option 3-Or completion of associate core program in electronic engineering; for positions requiring travel, must possess & maintain valid driver's license per Section 4507.02 (A)(1) of Revised Code. -Or equivalent of Minimum Class Qualifications for Employment noted above. Note: To meet the minimum qualifications through completion of a 2 yr. technical program, applicants must be able to verify that the technical program consisted of a minimum of 21 credit hours upon completion. Helpful Tips for Applying:1. Be detailed when describing your current/previous work duties. The more the better!! Don't just write "see attached resume".2. Tailor your application for each position you apply for. You should clearly describe how you meet the minimum qualifications outlined in this job posting.3. Respond to all questions asked. If you do not have the education/training/experience that is being asked, select either "No" or "N/A". Job Skills: Telecommunication Systems Supplemental InformationUNUSUAL WORKING CONDITIONS: Exposed to high voltages, inclement weather, dust, dirt, fumes, loud & constant noise; exposed to mosquitoes, rodents, wasps & poisonous snakes at remote tower sites; installations & repairs require working in confined spaces such as under vehicle dashboards & in vehicle trunks; on call 24 hrs; 7 days per week.This position is essential, meaning the duties this job performs are critical to the continued operations of the Ohio Department of Public Safety during a public safety emergency (OAC 123: 1-46-01 & DAS Directive HR-D-11). This position will be required to report for duty during any public safety emergency. Background Check Information A BCI and FBI fingerprint check, a background check, including a polygraph examination, may be required on all selected applicants.A comparative analysis and/or drug-test may be a requirement of the hiring process.This position is subject to Federal Alcohol Tobacco and Firearms (ATF) regulations that prohibit someone to carry, transport, or otherwise possess firearm(s) and/or ammunition from consuming marijuana, including medical marijuana. Medical marijuana is prohibited as a valid medical explanation for a positive drug test for final applicants in this position.To request a disability accommodation, please email ************************* as soon as possible, or at least 48 hours prior to the above referenced testing or interview date so any necessary arrangements may be made in a timely manner. ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug-free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting.

Scope: Provide professional and technical expertise to improve the efficiency of our operational systems, improve the quality of our products, and find more cost effective ways to meet these goals while reducing costs. Perform duties to ensure that all electrical and instrumentation maintenance is performed; replace and repair components and parts as needed, program monitoring systems and troubleshoot errors, to keep plant in safe and efficient operating condition. Essential Functions: * Supports Sofidel America's Good Manufacturing Practices and HACCP to promote a safe, sanitary and hygencially sound workplace. * Works from verbal and written instructions as well as work orders. Communicates openly between shifts. * Use designated computer systems to input work orders, track required work, and track parts in inventory. * Provide preventative electrical maintenance on electrical equipment, and instrument systems. Troubleshoot and diagnose problems related to instrumentation and electrical failure, report conditions, and recommend steps to be taken. Monitor instruments to determine within range. * Perform preventative maintenance such as changing contacts, checking motors, and operation of robotic systems. * Maintain the robotic systems including all mechanical, electrical and electrical components to ensure proper operation. * PLC/DCS programming, troubleshooting, and repair. Repair electrical and electronic systems including any electromechanical production equipment. * Collect PLC input and output data to monitor efficiency of equipment to assist in the planning of future conversion operations. * Program computerized monitoring system. Monitor output to determine if settings are correct. * Install cables, conduit, and instrumentation for new equipment or instruments. * Examine equipment to identify potential problems. Participate in process improvement efforts, identify inefficiencies, and design flaws. Collaborate with other team members as necessary to resolve problems and determine the roots cause. Recommend improvements and make adjustments. * Managing and working with contractors and vendors to monitor and improve the efficiency and output, to enhance our technology with better products and services, and safety of the plant. * Reads and uses all types of electrical schematic wiring diagrams and keeps abreast of new innovations and techniques in the specialized field in which engaged. * Assists in on-the-job training of others. Other Duties May Include: * Perform or assist with operations, as required to maintain workflow and to meet schedules and quality requirements. Notify supervision of unusual equipment or operating problems and the need for additional material and supplies. * Maintain safe work area and comply with safety procedures and equipment operating rules keeping work area in a clean and orderly condition. * Participate in a variety of meetings and work groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specified level of knowledge pertaining to new developments, requirements, policies, and regulatory guidelines. * Perform other related duties as assigned. Skill Requirements: * Must possess strong analytical and technical skills; * Excellent communication, documentation, and computer skills required; * Solid mechanical aptitude preferred; * Must have the ability/desire to work in a team environment; * Must possess a high level of integrity, inspiring trust; * Must demonstrate the ability to promote a safe working environment; * Must show a drive for results and desire to continually improve; * The ability to communicate vision and purpose and the ability to motivate others is a plus. * Experience in an industrial environment. Education/Experience Requirements: Minimum Requirement: High School or equivalent and minimum five years' experience in related field Two plus years of experience in related area. TOOLS AND EQUIPMENT USED: Employee will use computer and peripherals, standard and customized software applications and tools, and usual office equipment. Education/Experience: Bachelor's Degree in Electrical Engineering, Electronics Technology, Electro-Mechanical Engineering or Automation/Engineering preferred. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and quality and procedure manuals. Math Ability: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Physical Demands: Lift/Carry Requirements: Stand F (Frequently) 10 lbs. or less F (Frequently) Walk F (Frequently) 11-20 lbs. O (Occasionally) Sit F (Frequently) 21-50 lbs. O (Occasionally) Manually Manipulate F (Frequently) 51- 100 lbs. N (Not Applicable) Grasp F (Frequently) Over 100 lbs. N (Not Applicable) Reach Outward F (Frequently) Push / Pull Reach Above Shoulder F (Frequently) 12 lbs. or less F (Frequently) Speak F (Frequently) 13-25 lbs. O (Occasionally) Climb O (Occasionally) 26-40 lbs. N (Not Applicable) Crawl N (not applicable) 41-100 lbs. N (Not Applicable) Squat or Kneel F (Frequently) Bend F (Frequently) N (Not Applicable) Activity is not applicable to this occupation. O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements Vision (Near, Distance) Sense of Sound (within normal range) Sense of Touch WORK ENVIRONMENT: Personal protective equipment (PPE) is required when in the plant and warehouse areas. PPE will include safety shoes, eye and ear protection, reflective vests and hairnets or hats along with any other necessary protection. Temperatures in the plant/warehouse can range a great deal from season to season. The employee will be exposed to considerable paper dust and employees will also be exposed to noise levels that will require hearing protection. ACKNOWLEDGEMENT: The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. Please be advised that there has been increased activity of identity theft and internet scams by means of fake employment offers. It is Sofidel America's policy NOT to request any sensitive personal information and/or banking information until the end of the hiring process (bank account, routing number, SSN, etc.). We strongly advise all candidates to double check email addresses, phone numbers and webpage links as well as not share any personal information without verifying the authenticity of the request. EEO/AAP/M/F/D/V

The Electronics Technician performs basic diagnosis repairs and modifications to electronics systems. Performs the required periodic maintenance, troubleshooting, repairs, installations, and testing of equipment as required. Assist other Technicians in the setup, maintenance, and storage of airfield systems and deep-field camp systems that support aviation operations and weather observing. This position deploys to McMurdo Station, Antarctica to conduct work locally. The United States Antarctica Program requires all personnel deploying to Antarctica to pass a physical qualification. **Bonus Opportunity** CNI is committed to recognizing and rewarding our employees' hard work. As an incentive, team members who complete the deployment phase of their assignments and are in good standing may be eligible (*or qualify) for a performance-based bonus. This bonus reflects our appreciation for our employees' dedication, expertise, and contribution to successfully completing the deployment. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS Must be able to obtain a T1 Clearance through the government customer. Must pass internal background checks. A valid passport is required and is reimbursable. Must have a valid driver's license. Must be able to perform job duties in extreme, cold, dark, work environments. Must pass medical and dental examination prior to deployment; expenses are reimbursable. Knowledge and experience performing electronics repair, maintenance, and checkout. Ability to follow directions and work independently or with a team. Ability to be reliable in attendance/punctuality. Ability to practice and promote required safety standards. Working knowledge of Microsoft Office Suite. Ability to persuade others to accept recommendations and to negotiate to find mutually acceptable solutions. Ability to organize work, set priorities, and determine resource requirements. Organization, problem-solving, resolution and critical thinking skills. Customer service and relationship-building skills. Excellent verbal and written communications skills. KEY DUTIES AND RESPONSIBILITIES Essential Duties and responsibilities include the following. Other duties may be assigned. Monitors and reports on system readiness, capabilities, limitations, and reliability. Document and archive maintenance actions. Ensures work center safety and equipment verification; maintain tool inventory and CPR certification. Submits repair requests, maintain equipment logs and certifications, and manage spare parts inventory. Calibrates and repairs sensors, test equipment, and support NAVAIDS, communications, and meteorology systems. Adheres to configuration, security, and frequency management policies and procedures. Provides 24/7 maintenance support, prepare reports on incidents, system outages, and operational availability. Setup, maintain, and repair of all NAVAIDS and communications systems; ensure proper equipment installation and compliance with frequency management. Setup, maintain, and repair of all meteorology systems, and perform maintenance at remote locations. Attends safety training, maintains a safe work area, and engages in self-development through available training. EDUCATION AND EXPERIENCE Laborer: High School Diploma or GED. Performs tasks that require mainly physical abilities and effort involving little or no specialized skill. The following tasks are typical of this occupation: Loads and unloads trucks, and other conveyances; moves supplies and materials to proper location by wheelbarrows or hand trucks; stacks materials for storage or binning; collects refuse and salvable materials. Digs, fills, and tamps earth excavations; levels ground using pick, shovel, tamper and rake; shovels concrete and snow; cleans culverts and ditches; cuts trees and brush. Must be able to move and arrange heavy pieces of electronic equipment, office furniture, and appliances; pull outdoor cable; climb structures; use heavy-duty tools; and if properly trained, operate light machinery and equipment. Electronics Technician Maintenance I: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or two (2) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Two (2) years of practical experience, to include: electronics repair, maintenance and checkout. Must demonstrate at least one (1) year of practical experience in electronics installation. Experience may be achieved simultaneously. Electronics Technician Maintenance II: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or four (4) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Four (4) years of practical experience, to include: electronics repair, maintenance and checkout. Must demonstrate at least one (1) year of practical experience in electronics installation. Experience may be achieved simultaneously. Electronics Technician III Maintenance: High School diploma or GED and Formal electronics training from a Technical School, or Class A or B military school in electronics or communications, or four (4) year electronics apprentice program. Formal electronics training, to include: Installation Tasks, Soldering, Cable Dressing, Cable Tray, Conduit, and Making/Repairing Connectors. Eight (8) years of practical experience, to include: Electronics Repair, Maintenance, Installation and Checkout. Two (2) years of experience, to include: supervision, and shop practices. Three (3) years of practical experience, to include: electronics repair and installation. Experience may be achieved simultaneously. PHYSICAL DEMANDS The physical ability to stand and or walk frequently. May climb on a ladder or scaffolding to heights in excess of 10'. Bend/stoop, push/pull and work above the shoulder frequently. Occasionally balance, kneel, crouch, and squat. May occasionally lift and/or move up to 65lbs. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet The estimated pay range for this role is $24 to $36 per hour, with the final offer contingent on location, skillset, and experience. CNI offers a comprehensive benefits package that includes: Medical Dental Vision 401(k) Family Planning/Fertility Assistance STD/LTD/Basic Life/AD&D Legal-Aid Program Employee Assistance Program (EAP) Paid Time Off (PTO) - (11) Federal Holidays Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). #INDCNI

The ROSEN Group is a globally leading provider of cutting-edge solutions in all areas of the integrity process chain. Since its origins as a one-man business in 1981, ROSEN has rapidly grown and continues to do so. The international technology group consists of a team of more than 4,000 employees operating in more than 120 countries. ROSEN offers sophisticated and highly innovative products and services to the oil and gas and other engineering industries. ROSEN is an extended team of people with a passion for technology and innovation. Our ongoing organic growth results in career opportunities and gives our employees chances for further development and added experience. For more information about ROSEN go to ******************** ROSEN USA, based in Columbus, OH seeks to employ an Electronics Technician to test, repair, sensor test and perform basic wiring of ROSEN USA's in-line inspection tools. Responsibilities: The Electronics Technician will be responsible for the following: * Repair and test electronic components and wiring of in-line inspection tools in accordance with documented work procedures, technical instructions, drawings and parts lists. * Verification of the external sensor components of the in-line inspection tool. * Ability to identify parts and sensors that may need to be purchased or manufactured for the tool. * Work in close cooperation with Field Service Technicians regarding electronic and sensorial affairs. * Work in close cooperation with Mechanic Assembly Technician for final tool testing and assembly. REQUIREMENTS Local Columbus area applicants only, relocation and/or sponsorship not available. No agency solicitations or referrals please. Physical Demands: * Must be able to lift up to 80 lbs. with the assistance of another person from a start height of 48 inches to an end height of 9 inches from the floor up to 1 time per hour. * Must be able to lift up to 29 lbs. from a start height of 9 inches to end height of 36 inches from the floor up to 1 time per hour. * Must be able to push-pull up to 35 lbs. a distance of 75 feet up to 1 time per hour. * Must be able to push-pull with a force up to 10 lbs. a distance of 300 feet up to 1 time per hour. * Must be able to push-pull with a force up to 39 lbs. a distance of 10 feet up to 1 time per hour. * Must be able to push-pull with a force up to 17 lbs. a distance of 75 feet up to 1 time per hour. * Must be able to push-pull up to 30 lbs. up to 2 times per hour. * Must be able to grasp/squeeze tools with forces up to 45 lbs. up to 20 times per hour. * Must be able to ascend/descend a flight of 18 stairs with a height of 10 inches from the floor up to 1 time per hour. * Must be able to ascend/descend a three stair step stool with a height of 10 inches from the floor up to 1 time per hour. * Must be able to stand up to 1 hour continuously for a total of up to 8 hours. * Must be able to walk a distance up to 300 feet. Qualification or Skills: * 2+ years of relevant electronic assembly experience. * Associates or Technical degree with emphasis in electronics. * Wiring, soldering and assembly experience in a manufacturing environment a plus. * Ability to use a variety of hand and power tools. * Must be able to lift 50 lbs. or more. * Must have experience interpreting and working from schematic diagrams, specification sheets and manuals. * Must comply with established Health and Safety regulations. * Excellent written and verbal communication skills and capability to communicate with all levels of the organization. * Good time management and organization skills. * A self-motivated, pro-active individual who is able to work independently as well as in a team environment. * Basic skills with Microsoft Office products such as Word and Excel. * Successfully complete a drug screen test, background check and physical performance evaluation including a vision exam as applicable to the position OUR OFFER In addition to competitive pay, you are also eligible for most of the following benefits from Day One: * Medical - 2 PPO plans & 1 High Deductible (HDHP) with a Health Savings Account (HSA) * Dental - Covered at 100% for employee & dependents * Vision - Covered at 100% for employee & dependents * 401K with a 5% matching employer contribution * Company paid basic Life Insurance, Short Term Disability / Long Term Disability * Flexible Spending Accounts * Generous Vacation Plan & Paid Time Off (PTO) * Employee Assistance Program * Access to employee resource groups * Maternity & Parental Leave * Fertility, adoption and surrogacy benefits * 32 hours paid Volunteer Time Off * Hybrid working environment for certain positions * Annual merit & career advancement increases * Leadership growth & professional development opportunities * Tuition Reimbursement

Responsibilities and Qualifications RESPONSIBILITIES 2+ years of practical experience required, focused in Electronics Repair, Maintenance, Installation and Checkout. Other experience required in supervision, and shop practices, electronics repair and installation, and Information Technology installation projects. Ability to be qualified and trained to work on the Lenel “On Guard” ESS system, CCTV's and Morse Watchman Keypro systems. Contractor personnel performing work on the Lenel “On Guard” ESS shall be certified by Lenel as a Lenel Certified Professional (LCP) in Access Control and Video Trained by staff in how to use software and hardware. (Lenel, AMAG, Honeywell, IQ MultiAccess, Bosch, LG, DAQ Electronics, DEA System SPA, Hirsch Electronics, Valerus, Pelco, IDIS, Panasonic, Axis Communication, GFMS, KeyTrak Guardian, Morse Watchman, Stanley Security Solutions Keystone, and Matrix Key Control) REQUIRED QUALIFICATIONS Experience: Two years of overall professional experience in the Information Technology field. Two years of overall experience in Microsoft Windows client and server operating systems. Two years of experience with electronic security systems, specifically hands-on experience in installing, configuring, maintaining, and resolving issues with the DLA ESS or EKC system. Certifications: Lenel Certified Professional (LCP) - Ability to Obtain after Start Milestone Certification - Obtained by Start Education: HIgh School Diploma or GED Clearance: Must possess a Secret security clearance PREFERRED QUALIFICATIONS Certifications: DoD Approved 8570 Baseline Certification: Category IAT Level II Overview We are seeking a Electronics Technician to join our team supporting DLA Integrated Electronic Security Systems (IESS) and Electronic Key Control (EKC). TekSynap is a fast-growing high-tech company that understands both the pace of technology today and the need to have a comprehensive well planned information management environment. “Technology moving at the speed of thought” embodies these principles - the need to nimbly utilize the best that information technology offers to meet the business needs of our Federal Government customers. We offer our full-time employees a competitive benefits package to include health, dental, vision, 401K, life insurance, short-term and long-term disability plans, vacation time and holidays. Visit us at ***************** Apply now to explore jobs with us! The safety and health of our employees is of the utmost importance. Employees are required to comply with any vaccination requirements mandated by contract, applicable law or regulation. By applying to a role at TekSynap you are providing consent to receive text messages regarding your interview and employment status. If at any time you would like to opt out of text messaging, respond "STOP". As part of the application process, you agree that TekSynap Corporation may retain and use your name, e-mail, and contact information for purposes related to employment consideration. Additional Job Information WORK ENVIRONMENT AND PHYSICAL DEMANDS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Location: Columbus, OH Type of environment: On Site Noise level: Medium Work schedule: Schedule is day shift Monday - Friday. May be requested to work evenings and weekends to meet program and contract needs. Amount of Travel: Less than 10% PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle, feel, touch; reach with hands and arms; talk and hear. The employee is regularly required to stand; walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee is regularly required to lift up to 10 pounds. The employee is frequently required to lift up to 25 pounds; and up to 50 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK AUTHORIZATION/SECURITY CLEARANCE U.S. Citizen Secret security clearance or have a current National Agency Check with Local Agency Check and Credit Check (NACLC). OTHER INFORMATION Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. TekSynap is a drug-free workplace. We reserve the right to conduct drug testing in accordance with federal, state, and local laws. All employees and candidates may be subject to drug screening if deemed necessary to ensure a safe and compliant working environment. EQUAL EMPLOYMENT OPPORTUNITY In order to provide equal employment and advancement opportunities to all individuals, employment decisions will be based on merit, qualifications, and abilities. TekSynap does not discriminate against any person because of race, color, creed, religion, sex, sexual orientation, gender identity, protected veteran status, national origin, disability, age, genetic information, or any other characteristic protected by law (referred to as “protected status”). This nondiscrimination policy extends to all terms, conditions, and privileges of employment as well as the use of all company facilities, participation in all company-sponsored activities, and all employment actions such as promotions, compensation, benefits, and termination of employment. TekSynap is committed to ensuring that our online application process provides an equal employment opportunity to all job seekers, including individuals with disabilities. If you believe you need a reasonable accommodation in order to search for a job opening or to submit an application, please contact *************** for assistance.

Responsibilities & Qualifications RESPONSIBILITIES 2+ years of practical experience required, focused in Electronics Repair, Maintenance, Installation and Checkout. Other experience required in supervision, and shop practices, electronics repair and installation, and Information Technology installation projects. Ability to be qualified and trained to work on the Lenel “On Guard” ESS system, CCTV's and Morse Watchman Keypro systems. Contractor personnel performing work on the Lenel “On Guard” ESS shall be certified by Lenel as a Lenel Certified Professional (LCP) in Access Control and Video Trained by staff in how to use software and hardware. (Lenel, AMAG, Honeywell, IQ MultiAccess, Bosch, LG, DAQ Electronics, DEA System SPA, Hirsch Electronics, Valerus, Pelco, IDIS, Panasonic, Axis Communication, GFMS, KeyTrak Guardian, Morse Watchman, Stanley Security Solutions Keystone, and Matrix Key Control) REQUIRED QUALIFICATIONS Experience: Two years of overall professional experience in the Information Technology field. Two years of overall experience in Microsoft Windows client and server operating systems. Two years of experience with electronic security systems, specifically hands-on experience in installing, configuring, maintaining, and resolving issues with the DLA ESS or EKC system. Certifications: Lenel Certified Professional (LCP) - Ability to Obtain after Start Milestone Certification - Obtained by Start Education: HIgh School Diploma or GED Clearance: Must possess a Secret security clearance PREFERRED QUALIFICATIONS Certifications: DoD Approved 8570 Baseline Certification: Category IAT Level II Overview We are seeking a Electronics Technician to join our team supporting DLA Integrated Electronic Security Systems (IESS) and Electronic Key Control (EKC). TekSynap is a fast-growing high-tech company that understands both the pace of technology today and the need to have a comprehensive well planned information management environment. “Technology moving at the speed of thought” embodies these principles - the need to nimbly utilize the best that information technology offers to meet the business needs of our Federal Government customers. We offer our full-time employees a competitive benefits package to include health, dental, vision, 401K, life insurance, short-term and long-term disability plans, vacation time and holidays. Visit us at ***************** Apply now to explore jobs with us! The safety and health of our employees is of the utmost importance. Employees are required to comply with any vaccination requirements mandated by contract, applicable law or regulation. By applying to a role at TekSynap you are providing consent to receive text messages regarding your interview and employment status. If at any time you would like to opt out of text messaging, respond "STOP". As part of the application process, you agree that TekSynap Corporation may retain and use your name, e-mail, and contact information for purposes related to employment consideration. Additional Job Information WORK ENVIRONMENT AND PHYSICAL DEMANDS The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Location: Columbus, OH Type of environment: On Site Noise level: Medium Work schedule: Schedule is day shift Monday - Friday. May be requested to work evenings and weekends to meet program and contract needs. Amount of Travel: Less than 10% PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle, feel, touch; reach with hands and arms; talk and hear. The employee is regularly required to stand; walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee is regularly required to lift up to 10 pounds. The employee is frequently required to lift up to 25 pounds; and up to 50 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK AUTHORIZATION/SECURITY CLEARANCE U.S. Citizen Secret security clearance or have a current National Agency Check with Local Agency Check and Credit Check (NACLC). OTHER INFORMATION Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. TekSynap is a drug-free workplace. We reserve the right to conduct drug testing in accordance with federal, state, and local laws. All employees and candidates may be subject to drug screening if deemed necessary to ensure a safe and compliant working environment. EQUAL EMPLOYMENT OPPORTUNITY In order to provide equal employment and advancement opportunities to all individuals, employment decisions will be based on merit, qualifications, and abilities. TekSynap does not discriminate against any person because of race, color, creed, religion, sex, sexual orientation, gender identity, protected veteran status, national origin, disability, age, genetic information, or any other characteristic protected by law (referred to as “protected status”). This nondiscrimination policy extends to all terms, conditions, and privileges of employment as well as the use of all company facilities, participation in all company-sponsored activities, and all employment actions such as promotions, compensation, benefits, and termination of employment. TekSynap is committed to ensuring that our online application process provides an equal employment opportunity to all job seekers, including individuals with disabilities. If you believe you need a reasonable accommodation in order to search for a job opening or to submit an application, please contact *************** for assistance.

Passionate, driven people dedicated to making a difference in health care. Are you looking for an opportunity to get into the growing health care field? Look no further, we will train you! SpecialtyCare provides a comprehensive in-house training program that will help you gain valuable skills and a career in health care. We are looking for individuals that have excellent customer service skills that enjoy working in a fast-paced environment. SpecialtyCare is the nation's leading provider of outsourced clinical services. SpecialtyCare continues to grow and we'd like you to grow with us. Our clinicians and technicians participate in over 350,000 surgeries each year in 45 states, the District of Columbia, and Puerto Rico. We serve more than 1,000 hospitals and support more than 13,000 surgeons. We are always interested in building our team by hiring and training smart, dedicated people who share our values and our commitment to excellence. Join us as an Instrument Technician in Minimally Invasive Surgical Support working in the fast-paced Operating Room (OR). As an Instrument Technician you will be trained to positively impact the efficiency of the OR by: * Decontaminate soiled instrumentation, cameras, scopes and other materials/instrumentation as needed. * Prep and pack decontaminated items for sterilization. * Managing the maintenance, care, cleaning and repair of our instrument/scope sets in a hands-on environment. This role does not have direct patient contact/direct patient care. Requirements * Associate or bachelor's degree preferred. * Must live within 30 minutes of our contracted hospitals, able to work flexible hours and participate in a call rotation including weekends/holidays. * Reliable transportation and the ability to be on-call. * Must be able to successfully complete on the job training including certification and company sponsored education modules. The Successful Candidate The successful candidate must bring a high level of ethical, intellectual, professional and personal values that complement the team and company vision. The following competencies are highly valued: * Works well in a fast-paced environment and with a sense of urgency. * Is dedicated to consistently delivering excellent customer service. * Excellent communication skills and basic computer skills. * Ability to adapt and thrive in a high stress environment. * Proven self-starter who works well both independently and in a team. * Lives the SpecialtyCare Values - Integrity, Care, Urgency, and Improvement. Benefits SpecialtyCare is committed to supporting professional growth for our associates. Each associate is allocated funds for continuing education, membership fees, and dues for professional associations. We also provide tuition reimbursement or tuition repayment assistance. We provide a full benefits package including a matching 401K and generous PTO plan. We also cover the cost of maintaining certification. SpecialtyCare is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. SC MISS

No Experience Necessary - Training Provided PRIMARY RESPONSIBILITIES Assess various commercial, industrial, and home user electronics. This can include commercial networking appliances and server equipment, industrial computers and purpose built technology in addition to mass produced retail grade products. Technicians will be responsible for disassembly of electronics and sorting harvested components. Familiarity with home computers and experience building/repairing PC's not required but a big plus. Follow All Safety Procedures Ability to stand on your feet for long periods of time while working Safely use hand tools and basic power tools (hand drill, impact driver) Break down electronic and computer equipment to remove technological components Sort raw materials Palletize finished product for shipping Stage finished product for loading Move raw materials to warehouse storage Responsible for quality control of company product Operate within standard operating procedures (SOPs) Maintain housekeeping of warehouse and surrounding area Turn off and lock out equipment when not in use Check in equipment received in warehouse according to company procedure Adhere to all company policies and procedures Other general warehouse duties as assigned KNOWLEDGE AND SKILL REQUIREMENTS Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent. Manual dexterity required for operating machinery. Ability to lift up to 75 pounds required. Clean Background check. Willingness for background check and drug screening. WORKING CONDITIONS Working conditions are normal for a manufacturing environment. Work involves frequent lifting of materials and product up to 75 pounds. Machinery operation requires the use of safety equipment to include but not limited to; eye safety glasses, hearing protectors, work boots, and hardhats. No Phone Calls Walk in Applications Accepted Job Code: 99 Closing On: Closing On: Tuesday, 14th February 2023 Department: Warehouse Shift: Monday-Friday 9 a.m.-5 p.m. Location: Columbus, Ohio West Columbus 3854 Fisher Rd Job Type: Full Time Education: High School Pay Rate: $13-$16 hr

Benefits: Bonus based on performance Dental insurance Employee discounts Health insurance Vision insurance We have a great benefits package consisting of: Health Insurance - Affordable health insurance with the 2 plan options: PPO 2000 or HSA 3000 Dental Insurance - Affordable dental insurance with NO waiting period. Vision Insurance - Quality vision coverage for very little cost. Life Insurance - $10,000 Life Insurance Policy paid in full by the company. 401K Plan - All administrative fees are paid by the company. ESOP - Employee Stock Ownership Program Paid Time Off - Competitive paid time off policies. Employee Discount - Generous employee discount on ALL merchandise. Appliance & Electronics Technician At Big Sandy Superstore, our success is based primarily on the quality of people on our team and their commitment to delivering the Superstore Experience. We are devoted to investing in and supporting our employees and the constant improvement of our company. In fact, we strive to provide a great work environment and treat each other with respect and dignity. As an Appliance & Electronics Technician you will be responsible for diagnostics and repair of customer units. The expectations and duties of this job are as follows: Contact customer at the start of each work day. Run all calls that are scheduled for the day. Accurately diagnose Appliances & Electronics. Order parts and put comments in the work order from the customer's home. Install parts on units and test operation when finished with installation of parts. Call tech line and document call in the system after any failed repair attempt. Finalize all billing notes from the customers home. Additional tasks, both within the scope of this position and outside of it, will be assigned and are expected to be completed within the agreed upon time-frame. Qualities we are looking for: A self-starter with strong multitasking skills Can work independently or within a team environment An individual who has the financial well-being, public confidence in, and image of the Company in mind at all times. Qualifications: High School Graduate or GED Strong customer skills Strong interpersonal skills Job Type: Full-Time Regular Company reserves the right to add or delete from job description as needed.