Top Electronic Test Technician Skills

Below we've compiled a list of the most important skills for an Electronic Test Technician. We ranked the top skills based on the percentage of Electronic Test Technician resumes they appeared on. For example, 14.1% of Electronic Test Technician resumes contained Component Level as a skill. Let's find out what skills an Electronic Test Technician actually needs in order to be successful in the workplace.

The six most common skills found on Electronic Test Technician resumes in 2020. Read below to see the full list.

1. Component Level

high Demand
Here's how Component Level is used in Electronic Test Technician jobs:
  • Performed test alignments, and troubleshooting to component level of electronic circuitry used on military aircraft.
  • Performed component level testing and troubleshooting of switching power supplies used in industrial applications.
  • Performed high level, complex troubleshooting to component level and summarized diagnostic findings.
  • Delivered troubleshooting and repair activities to component levels and diagnostic fault conditions
  • Performed failure analysis and repair of complex circuitry to component level.
  • Tested and trouble-shot electronic navigation systems to the component level.
  • Conducted component level troubleshooting and reworked digital and analog circuits.
  • Tested and troubleshooted optical networking modules to component level.
  • Performed electronic technician/mechanical technician work to component level.
  • Repaired telecommunication devices down to component level.
  • Diagnose to start troubleshooting down to component level, connecting the network cables and power cord, and various test equipment.
  • Diagnosed and repaired failed electronic assemblies down to the component level on defective assemblies using schematic and technical drawings to assist.
  • Performed troubleshooting and repair of printed circuit boards in accordance with test manuals and schematics from system to component level.
  • Assembled, tested, and troubleshot boards to component level for communications and medical equipment through all stages of production.
  • Supervised the assembly of X-Ray steel gauging source equipment to include repair, testing, and component level troubleshooting.
  • Repair and manufacturing of circuit boards down to the component level for commercial and military airline smoke detection systems.
  • Tested and performed troubleshooting of all types of electronic boards, equipment and devices to the component level.
  • Test, troubleshoot and repair alarm devices down to component level with use of schematics and test equipment.
  • Test, calibrate, troubleshoot harnesses, circuit boards, assemblies and systems of military equipment to component level
  • Experience in all aspects of electronic manufacturing from assembly, inspection, test and troubleshooting to component level.

Show More

2. Oscilloscopes

high Demand
Here's how Oscilloscopes is used in Electronic Test Technician jobs:
  • Used test equipment Oscilloscopes, wavelength and power meter, Fluke Analog, and mechanical tools.
  • Use of Schematics, Soldering tools, oscilloscopes, and volt meters.
  • Assembled lasers into chassis and pre-tuned electronics using oscilloscopes and laser controllers.
  • Test equipment includes, but not limited to power meters, frequency generators, spectrum analyzers, oscilloscopes, and multimeters.
  • Utilized Spectrum Analyzers, Digital Multimeters, Oscilloscopes, and other standard test equipment as part of product evaluation.
  • Utilized various electronics test equipment including: oscilloscopes, multimeters, RF power meters, RF spectrum analyzer.
  • Tested and troubleshot assemblies with power supplies, multimeters, oscilloscopes, and other bench top test equipment.
  • Developed, set-up and maintained test equipment using power supplies, multimeters, oscilloscopes and other required equipment.
  • Test equipment used includes digital multi-meters, oscilloscopes, and Fluke data loggers.
  • Operated oscilloscopes, function generators, multi- meters, and test loads.
  • Use schematics, oscilloscopes, and multimeters to test electronic medical equipment.
  • Used multi-meters, oscilloscopes, and power supplies to troubleshoot PC boards.
  • Use of Spectrum Analyzers, Oscilloscopes, power supplies and multi-meters.
  • Work with oscilloscopes, function generators, power supplies and multi-meters.
  • Use of all types of test equipments such as Oscilloscopes, Spectrum Analyzers, power supplies and voltmeters/digital multimeters.
  • Perform test using oscilloscopes, multimeter, variacs, tone generator, schematics, wiring diagrams.
  • Use of schematics, oscilloscopes, multimeters, Huntron Trackers, LCR meters.
  • Operated photometers, spectrum analyzers, multimeters, oscilloscopes Troubleshot and repaired customer returned equipment Assembled and tested military grade electronics

Show More

3. Test Procedures

high Demand
Here's how Test Procedures is used in Electronic Test Technician jobs:
  • Promoted a favorable business profile by demonstrating test procedures to government inspectors and other prospective customers.
  • Developed test procedures for electronic assemblies and trained assemblers in production techniques for the electronic assemblies.
  • Guaranteed the quality of computers/systems delivered to the customers, by meticulously following intricate test procedures.
  • Tested products under extreme conditions which produced new test procedures Operated system and network analyzers.
  • Test and Analyze medical ultrasound machines utilizing test procedures and documents.
  • Tested a variety of electronic units using designated test procedures.
  • Developed Test Procedures for new products and improved existing procedures.
  • Performed electrical testing in accordance with test procedures.
  • Contributed in developing test procedures to enhance efficiency.
  • Maintain company's written test procedures and test equipment, provide technical support for all programs assist project/design engineers as needed.
  • Conduct Environmental Stress Simulation (ESS) test procedures including vibration, temperature cycling, and thermal calibration of inertial reference units
  • Evaluated and corrected all acceptance test procedures for MD405 SIGINT Receiver to form the accurate, specific and simple procedures.
  • Assisted in the design and build of manual & automated test stations and development of test procedures for both programs.
  • Follow customer and DRS acceptance test procedures and documented test results, using applicable test equipment and automated test equipment.
  • Refer to bill of materials (BOM) to identifying up-to date test procedures, software and equipment used.
  • Read and comprehend schematic drawings, Engineering Change Orders (ECO), Test Procedures, and rework documents.
  • Produced and improved Test Procedures to encourage a better understanding and provide clear direction of the procedures scope.
  • Train new technicians, Updated test procedures and documents - Interfaced with Manufacturing Engineering for ECO modification.
  • Followed guidelines, utilized troubleshooting test procedures and schematics and determined the cause of the failure.
  • Created documentation such as Test Procedures and Checklists to assist other test technicians with their tasks.

Show More

4. PCB

high Demand
Here's how PCB is used in Electronic Test Technician jobs:
  • Perform hands on assembly of PCBA's per Mil-Specs TM-455, wiring harnesses and box builds per Mil- Specs TM-8575.
  • Interfaced with board vendors on testing of PCB's and provided training on testing of product being built.
  • Run production product tests at PCB level and final assembly and troubleshoot as needed.
  • Assisted in the creation of documentation for testing and repair of PCB assemblies.
  • Repaired galvanometers, support PCB's and final shipment back to customer.
  • Designed and built manual test sets for testing of PCB's.
  • Experience with RF circuitry tracing signal on PCB to find failures.
  • Use of specialized test equipment to test and troubleshoot PCB's.
  • Performed quality control procedures and inspections on surface mount PCB's.
  • Provided component level repair of PCB's not meeting test criteria.
  • Performed test and repair on PCB's in manufacturing process.
  • Utilize test fixtures to test and program PCB'S.
  • Calibrated and tuned Microwave Cell Tower Amplifier PCB's
  • Maintained PCB Hot Bed test stations.
  • Analyzed and repaired media PCB boards.
  • Repaired PCB'S at component level.
  • Install the firmware and run the programmer device MPLAB and PM3 to test the PCB.
  • Perform surface mount Inspection (QC) of PCB's for solder defects etc.
  • Heat & cold cycle test of PCB racks overnight etc.
  • Installed software programs to IC's and PCB's.

Show More

5. Test Cases

high Demand
Here's how Test Cases is used in Electronic Test Technician jobs:
  • Verified/validated test cases/procedures and created automated test scripts.
  • Produced concise documentation from execution of test cases.
  • Execute test cases, report testing status to Project Engineer.
  • Execute test cases according to test plan, submit defects and work with development engineers to recreate issues.
  • Developed, updated, and groomed test cases
  • Provide feedback of new and existing test cases to Engineers to ensure they are accurate and clearly written.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Analog

high Demand
Here's how Analog is used in Electronic Test Technician jobs:
  • Test the MEMS analog/digital microphones after different stress tests and provide a solution if a part failed.
  • Tested, troubleshoot, and repaired digital and analog telephone switch boards for central office switching systems
  • Tested repaired and calibrated RF, microwave, VHF and UHF analog / digital transmitters.
  • Configured digital and analog CCA's for specific applications through hardware programming and manual tuning.
  • Tested and trouble shoot analog and digital ohm meter, oscilloscope, Calibration.
  • Analyze test results of Digital, Analog, and RF Microwave circuitry.
  • Operated LabView DAQ software tools for evaluation of analog and digital circuits.
  • Test, troubleshoot, repair and calibration of GSM digital/analog R.F.
  • Test and alignment of digital and analog circuitry.
  • Applied schematics to troubleshoot analog and digital circuits.
  • Experience with Digital and Analog circuitry.
  • Performed final inspections of advanced analog and digital telecommunications equipment, using state of the art testing devices.
  • Complete functional testing and repair of Digital Signal Processors and Multi-signal analog audio equipment.
  • Performed wire soldering, wire harness, testing and modification of wire bundles Analyzing Digital/Analog, AC/DC Electronics Circuits.
  • Test, troubleshoot, calibrate and repair digital and analog test production equipments.

Show More

7. Trouble Shooting

high Demand
Here's how Trouble Shooting is used in Electronic Test Technician jobs:
  • Trouble shooting analyze electronic components for military fire control systems.
  • Perform test analysis, certification and trouble shooting down to the component level, virtual flight testing of YF-22 Fighter components.
  • Test Technician responsible for laying out, building, repairing and trouble shooting load boxes for functional and durability test stands.
  • Perform basic trouble shooting encompassing multiple variables and unknowns to achieve root cause analysis and problem resolution.
  • Skilled in trouble shooting electronics components and ensuring proper testing of all equipment used.
  • Performed electrical trouble shooting to component level using O-scopes, meters and schematics.
  • Tested circuit boards, and minor trouble shooting of defects.
  • Trouble shooting test failures down to the component level.
  • Test and troubleshooting; Read and interpret schematic, using AC/DCvoltmeter and Oscilloscope to perform trouble shooting for failed boards.
  • Trouble shooting to component level using oscilloscope multimeter and AC panel source with adjustable loads.
  • Perform testing and trouble shooting of motion multi axis controllers.

Show More

8. Frequency Counters

high Demand
Here's how Frequency Counters is used in Electronic Test Technician jobs:
  • Operated oscilloscope, signal generator, frequency counters.
  • Measured transmission signal with frequency counters.
  • Use a variety of testing equipment like volt meters, oscillator scopes, variable power supplies and frequency counters.
  • Evaluated procedures to achieve specific troubleshooting goals with logic probes, function generators, oscilloscopes, and frequency counters.
  • Test equipment used: Power meters, Power Sensors, Oscilloscopes, Network Analyzers, and Frequency Counters.
  • Performed calibration on various meters which included oscilloscopes, spectrum analyzers, frequency counters and watt meters.

Show More

9. PCS

high Demand
Here's how PCS is used in Electronic Test Technician jobs:
  • Upgraded all PCs hardware and software in a windows platform.
  • Integrated PC and Unix workstations in Ethernet and TokenRing environments Repaired PCs, workstations, and LANs.
  • Tested/repaired and installed software for custom PCs for both single and multiprocessor configurations.
  • Performed reliability and functionality tests on PCs.
  • Drive the maintenance of PCs, functional test racks, hardware and software in the Production Test and RMA functional areas.
  • Configured and tested PCs for the APT analog weather satellite system, and created installation scripts for floppy media distribution.

Show More

10. Spectrum Analyzer

high Demand
Here's how Spectrum Analyzer is used in Electronic Test Technician jobs:
  • Use of spectrum analyzer and calibrations.
  • Used spectrum Analyzer, Oscilloscope and Digital Multi Meter.
  • Use of Digital Multimeter, Oscilloscope and Spectrum Analyzer.
  • Maintained proficiency in the operation of test equipment including spectrum analyzers and complex computer control equipment.
  • Operated complex test equipment including; signal generators, spectrum analyzers, network analyzers and oscilloscopes.
  • Tested, maintained and calibrated satellite communication equipment with spectrum analyzers and specialized test equipment.

Show More

11. Electrical Systems

high Demand
Here's how Electrical Systems is used in Electronic Test Technician jobs:
  • Performed electrical systems testing on OHIO, VIRGINIA, and LOS ANGELES class submarines.
  • Maintain entire prototype or new electronic or electrical systems, prior and subsequent to flight test acceptance.
  • Produce method statement and risk assessment document for the removal and installation of cubicles and other electronic/electrical systems.
  • Designed, constructed and tested prototype equipment for electrical systems and components, consistent with engineering and other specifications.
  • Performed preventive maintenance on solar panel sites that controlled various military communication and electrical systems.
  • Provided expert training and instruction in general and in-depth troubleshooting of electronic and electrical systems.

Show More

12. ISO

high Demand
Here's how ISO is used in Electronic Test Technician jobs:
  • Performed required repairs per manufacturer specifications and industry standards; maintained complete records and reported findings to supervisor.
  • Work with limited supervisory guidance and report to management with any updated information.
  • Report defective material and questionable condition to department supervisor.
  • Design of experiments for component performance comparison.
  • Test, troubleshoot and repair of high-power supply modules for MRI Systems to component level in an ISO-9001 Production environment.
  • Research and define material requirements and support procurement process, liaison with subcontract suppliers, develop subcontract statements of work.
  • Performed fault isolation, testing, troubleshooting, adjustments, and alignments of high power systems and SCR rectifiers.
  • Trained in production management, Statistical Process Control, Green Belt, Six Sigma, and ISO 9001.
  • Configured computer software to isolate and document retrofitting procedures for cell phones, before scheduled time restraints.
  • Improved the test record inventory system to successfully meet internal and ISO 9001 quality management systems requirements.
  • Established test instructions; adjusting to nominal parameters, troubleshooting, isolating, and diagnosing failures.
  • Work to implement lean manufacturing philosophy while striving for ISO 9000 certification in a 5S environment.
  • Followed stringent ISO 9001 procedures in all job duties to ensure quality and conformity of products.
  • Participated in engineering review, and document/process review and revision in an ISO 9001 environment.
  • Certified ISO9000 Military Specification for soldering printed circuit boards surface mount and through hole components.
  • Key Member of the ISO 9000 (International Organization for Standardization) Certification Program Team.
  • Acted as a liaison for the practice with state, county and municipal agencies.
  • Isolate product faults for the manufacturing team for correction, modification, and improvement.
  • Performed quality control, ISO 9001: 2008 standards and internal equipment auditing.
  • Verse in ISO 9001 manufacturing standards for electronics productions on a large scale.

Show More

13. SMT

high Demand
Here's how SMT is used in Electronic Test Technician jobs:
  • Performed repairs using through-hole and SMT soldering procedures using ISO 9001 Standards.
  • Company trained and certified in SMT soldering including fine pitch parts.
  • Supervised training of employees responsible for fiber optic circuit packs/SMT repairs.
  • Replace defective SMT components by using soldering iron with microscope.
  • Experience with soldering both through-hole and SMT assemblies
  • Soldered using SMT (Surface Mounted Technique) and through hole technique of components on Manufactured Double and Triple layered PCBs.
  • Use of oscilloscopes, DMMs, power supplies, temperature environmental chambers, SMT soldering tools, and various hand tools.
  • Performed tasks in conformal coating, SMT, Wave form, and hand soldering.
  • Performed soldering, re-soldering of printed circuit board components, thru-hole and SMT.
  • Skilled in de-soldering of components from Printed circuit boards to include SMT devices
  • Tested and troubleshoot printed circuit boards Read Schematics Solder and Desolder Thru hole and SMT parts

Show More

14. Debug

high Demand
Here's how Debug is used in Electronic Test Technician jobs:
  • Instructed other technicians to test and debug digital and analog circuits systematically by following troubleshooting flow chart.
  • Assisted engineering department in fabrication, wiring and debugging of prototype models.
  • Implemented new diagnosis techniques resulting in more effective analyzing and debugging.
  • Repaired electronic products and perform troubleshooting and debug servers.
  • Debugged various electronic equipment to the component level.
  • Assist with debug of ATE and burn-in fixtures, reports pertaining to accomplishments, project status and new objectives.
  • Process involved evaluating, troubleshooting, and debugging the cable systems while adhering to a strategic scheduling system.
  • Test debug and fix PC board problems using custom made tester modules and automated test equipment.
  • Identified new products for high volume production, failure analysis and debug down to components level.
  • Trouble shot the test station Basic software test programs in order to debug new versions.
  • Tested, debugged, and repaired electronic boards for defense and commercial aerospace test applications
  • Checked and debugged trouble analysis and repaired test objects for all test location.
  • Perform root cause analysis of field failures, Debug and troubleshoot devices.
  • Designed, assembled, and debugged automated production devices and processes.
  • Debug & Repair of complex electronics PCB's to component level.
  • Trained new technicians on how to test and debug units.
  • Tested & debugged new assemblies & repairs, incl.
  • Debug microprocessor assemblies with the use of diagnostic tools.
  • Test, debug, and repair electronic circuit boards
  • Submit debugged units to UCTS to be tested.

Show More

15. Circuit Boards

average Demand
Here's how Circuit Boards is used in Electronic Test Technician jobs:
  • Provided testing and troubleshooting of electronic units for aircraft and communication circuit boards for military vehicles.
  • Developed operating procedures that allowed a quicker turnaround for multiple step circuit boards.
  • Executed digital and analog testing for contracted customers including printed circuit boards.
  • Scheduled testing work flow for newly manufactured electronic circuit boards.
  • Test, troubleshoot and repair analog and digital encoders, decoders, circuit boards, AC and DC power Supplies.
  • Test a variety of controller circuit boards for different auto manufacturers, testing of hardware and software per instructions.
  • Worked directly with engineering on developing and testing new software and printed circuit boards for existing and prototype machines.
  • Tasked with the development/assembly of electronic sub-assemblies, printed circuit boards and wire wrap Boards per customer specification.
  • Conducted testing, troubleshooting and repair of circuit boards related to the operation of the telephone system.
  • Performed contracted services for Honeywell to complete bench testing of electronic circuit boards and power supplies.
  • Performed testing, troubleshooting, and repair of printed circuit boards for gas detectors.
  • Performed functional, in circuit testing, and diagnostics on new production circuit boards.
  • Assembled parts for Printed Circuit Boards prior to final product assembly in two-way radios.
  • Perform testing, tuning, assembly and repair of electronic cables and circuit boards.
  • Checked LED s on control panel and circuit boards for illumination and correct operation.
  • Test, troubleshoot and repair of production units, sub-assemblies and circuit boards.
  • Circuit board assembly required to build, and solder circuit boards to drawings.
  • Tested, repaired, and modified printed circuit boards used for these systems.
  • Test, diagnose, repair printed circuit boards removed from the production line.
  • Use computer software and hardware to conduct functional tests on circuit boards.

Show More

16. Setup

average Demand
Here's how Setup is used in Electronic Test Technician jobs:
  • Specify and procure electronic components and assemblies used in specialized electronic test boxes, harnesses and test setups.
  • Performed setup, calibration, testing and troubleshooting of circuits, systems, measurement and mechanical assemblies.
  • Complete paper work for PC/Laptop setups for end user with received inventory and allocated peripherals.
  • Build new CAT 5 network cables for new offices in need of network setup.
  • Tested, at In Circuit Test setup, numerous boards for Thales and PICO.
  • Provide test setups with ATE and bench equipment, testing of parts.
  • Perform FAT/CAT testing using WAFE and high temperature oven setup and programming.
  • Verified the feeder setup for part placement.
  • Relocated and setup test department.
  • Prepared the surface grinder and tool post grinder for setup and sharpening of tools of the Amada punch press.
  • Test various circuit card assemblies on the ATEs and at the bench using bench setups.
  • Key leader responsible for the programming, setup, and operation of CNC Hurco.
  • Softwared loading and setup of array of multiple Ethernet linked Unix workstations.

Show More

17. Surface Mount

average Demand
Here's how Surface Mount is used in Electronic Test Technician jobs:
  • Collaborated with technical team troubleshooting surface mount technology board issues and corrected individual circuit board problems.
  • Replaced defective electronic components on conventional and surface mounted PC Boards.
  • Tested EKG medical surface mount printed circuit boards by using a documented test procedure.
  • Repaired PC boards to component level, including surface mount.
  • Soldered/replaced surface mount and through-hole components for printed circuit boards.
  • Set up and operate Fuji machines for surface mounted assembly.
  • Replaced bad parts through holes and surface mount technology.
  • Surface mount and through hole soldering of components.
  • Repaired surface mount and through hole components.
  • Populated printed circuit boards using thru-hole and surface mount soldering techniques.
  • Accomplished thru-hole, fine pitch, and surface mount soldering skills.
  • Soldered and de-soldered conventional and surface mount parts.
  • Circuit Boards and Components Multilayered circuit card assemblies (through hole and surface mount).
  • Solder and unsolder surface mount and thru hole components.

Show More

18. Hand Tools

average Demand
Here's how Hand Tools is used in Electronic Test Technician jobs:
  • Repair, modify, and test power supplies using a variety of hand tools, test equipment, and soldering tools.
  • Build electronic & mechanical assemblies using wiring & mechanical drawings with power & hand tools.
  • Build & test electrical cables using various hand tools & cable drawings.
  • Performed mechanical, electromechanical and electronic assembly utilizing manual and powered hand tools.
  • Utilized various hand tools such as wire strippers, crimpers, drills, wrenches, screw drivers, etc.
  • Used basic mechanical hand tools (wire strippers, power drill, wrenches, etc.
  • Use of standard pneumatic and hand tools and multimeter

Show More

19. Electronic Assemblies

average Demand
Here's how Electronic Assemblies is used in Electronic Test Technician jobs:
  • Performed testing of electronic assemblies in automated functional and in-circuit test equipment to ensure proper functioning.
  • Assisted in evaluating electronic assemblies for field operational readiness.
  • Performed functional tests on complex electronic assemblies.
  • Inspect, test & troubleshot electronic assemblies used in Radar, avionics, communications & counter measures.
  • Trouble shot production errors in components and electronic assemblies with computer test encoders.
  • Perform troubleshooting on electronic assemblies that fail functional test.
  • Rework Electronic Assemblies as needed to meet quality standards.
  • Test of Various Power Electronic Assemblies and components.
  • Test, troubleshoot and repair electronic assemblies.
  • Build and test electronic assemblies.
  • Selected and installed components necessary for electronic assemblies to comply with test specifications.

Show More

20. Signal Generators

average Demand
Here's how Signal Generators is used in Electronic Test Technician jobs:
  • Use of electronic and electrical test equipment including voltmeters, oscilloscopes, pattern generators, signal generators.
  • Perform continuity checks, locate and correct wiring errors using measuring instruments ohmmeters and signal generators.
  • Aligned and calibrated production models telemetry receivers, signal generators, multiplexers
  • Developed systems to automatically calibrate signal generators and frequency converters.
  • Tested calibrated and repaired electronic signal generators.
  • Characterize the performance of analog electronic circuit ideas in the lab using breadboard techniques, signal generators, oscilloscopes and metering.

Show More

21. Final Test

average Demand
Here's how Final Test is used in Electronic Test Technician jobs:
  • Performed temperature, environmental and final testing on transmitters and receivers using varying temperature settings to meet specific global customer requirements.
  • Experienced in final testing and versed in quality practices and procedural documentation.
  • Performed final test and assembly on high-energy medical surgery lasers.
  • Performed preliminary and final testing of medical devices.
  • Perform final test calibration Pyxis-Envoy automated medication system.
  • Performed final test on power supply product using power-bench, test fixture and computer program to collect data.
  • Performed final test on CO2 lasers used for cutting metals, apparel and medical field.
  • Performed Final Test using Lab-view to test GPS, GSM connection for IDS 024 production.
  • Assisted Final Testing Array department team on after burn-in failure to troubleshoot and repairs.
  • Perform 48-hrs burn-in (continuous) testing, final testing & final inspection.
  • Completed Final Test Acceptance / Quality Inspection and TQC documentation sign-off.
  • Improved Pretest and Final Test procedures for new Modulator Controller.
  • Completed final testing on all products on our unit.
  • Completed the production and final testing of communication devices.
  • Maintained and upgraded automated test fixtures for final test.
  • Analyze final test for collecting real time data.
  • Performed functional, environmental and final test on security devices Reported failures debug and repair
  • Tested, calibrated and final test of EVT300 products thru thermal, vibration, frequency deviation and azimuth calibration on antennas.
  • Assigned to Final Test position performing all final testing of Luminaries, Consoles, and Network Interface units.
  • Read Schematic, check signals with an Oscilloscope, soldering & De-soldering to component level and final test.

Show More

22. Electronic Test Equipment

average Demand
Here's how Electronic Test Equipment is used in Electronic Test Technician jobs:
  • Performed tests using standard and specialized electronic test equipment.
  • Build, repair, maintain and calibrate electronic test equipment to ensure quality of military and aerospace products.
  • Conduct non standard dynamic tests and operation, troubleshooting and repair of electronic test equipment as needed.
  • Read schematics, Use electronic test equipment, oscilloscope, test probes, power supplies.
  • Applied soldering skills utilized various electronic test equipments.
  • Test and inspect various electronic components using electronic test equipment (Multi meters, power supplies, Oscilloscopes).
  • Performed In-Circuit Test ( ICT ) Functions Utilizing Many Different Types of Electronic Test Equipment.

Show More

23. Network Analyzers

average Demand
Here's how Network Analyzers is used in Electronic Test Technician jobs:
  • Test and troubleshoot: Validation switches using oscilloscopes, impedance analyzers and network analyzers
  • Utilized a number of tools in daily activities, including spectrum and network analyzers, oscilloscope, and frequency generator.
  • Used tools such as network analyzers, screwdrivers, pliers, multimeters, wire strippers, and measuring tapes.
  • Test magnetic components using Network analyzers, LCZ bridges, multimeters, and oscilloscopes.

Show More

24. DMM

average Demand
Here's how DMM is used in Electronic Test Technician jobs:
  • Operate electronic test equipment including, DMM's, Thermotron, power supplies, frequency generator and oscilloscope.
  • Employed oscilloscopes, signal generators, spectrum analyzers, DMMs, and project-specific test equipment.
  • Process flight hardware using DMMs, digital oscilloscopes, analyzers.
  • Use of DMM s, watt meters, spectrum analyzers, RF monitors, soldering equipment and various troubleshooting software packages.
  • Used oscilloscope, DMM, signal generator, optical power meter, spectrum analyzer, and LCR meter as troubleshooting tools.
  • Test equipment utilized included DMM's, oscilloscopes, spectrum analyzers, waveform function generators, and signal generators.

Show More

25. Test Stations

average Demand
Here's how Test Stations is used in Electronic Test Technician jobs:
  • Perform engineering tasks for electrical design and technical analysis for avionic software test stations.
  • Maintained, troubleshot, repaired and calibrated functional and environmental test stations.
  • Test Equipment Department Technician building the Automatic Test Stations and the Manual Test Stations for production to test our equipment.
  • Repaired the RMA units, set up the test stations for the varied tests, following the instructions.
  • Maintained in circuit test, in system programming, functional and vision display test stations and fixtures.
  • Performed depot level troubleshooting of electrical, optical and RF sub-system modules and test stations.
  • Help test engineer set up and maintain test stations and test fixtures when needed.
  • Set up automated test stations and supervise test personnel on a daily basis.
  • Design of high voltage relay switching networks & test stations for consumer products.
  • Performed preventive maintenance and added safety to test stations.
  • Operated Automatic Optical Inspection and In Circuit Test stations.
  • Keep test stations in operational order.
  • Cable assembly of RG-59 and 4 pair Ethernet for remote test stations.
  • Fabricated test stations for the Element 6 laser program
  • Utilize computer aided test stations along with A.P.I', power supplies, digital analyzing volt meters.

Show More

26. ICT

average Demand
Here's how ICT is used in Electronic Test Technician jobs:
  • Company has very strict quality specifications since it manufactures high end audio circuits used to control commercial sound systems.
  • Performed service and maintenance on all In-Circuit Testers (ICT) and Final Functional Testers (FFT).
  • Supplied the customer with their required test data following strict specifications.
  • Experience with ICT and FCT testing.
  • Operated ICT, 5D xray, 4D xray, and BGA rework station.
  • Performed production testing operations in strict compliance with test, operating procedures, and ensured unit functions worked according to specifications.

Show More

27. AC

average Demand
Here's how AC is used in Electronic Test Technician jobs:
  • Performed structured training programs for new technicians in proper installation techniques and safety practices to be used during installation of electronic systems
  • Provide evaluation, constructive feedback and leadership in the development of internal and external engineering, manufacturing, or service documentation.
  • Maintain security in secure spaces within the company's allowable parameters, and conduct operational tests on electrical/ electronic systems.
  • Automated test set product failure analysis was required, including interfacing with lead engineer for product test failure resolution.
  • Documented test results, analyzed trends, suggested improvements and communicated same to Manufacturing, Engineering and Quality Department Managers
  • Designed subsystems for record keeping, high-resolution printing, machinery operation control, load measurements and security systems.
  • Adjusted or replaced defective or improperly functioning circuitry or electronics components, using hand tools or soldering iron.
  • Supervised and trained inexperienced shift personnel on all aspects of acoustics functions for CDMA technology cellular telephones.
  • Maintained prepared and utilized inspection, measuring and test equipment for operation and acceptance to specified requirements.
  • Assembled circuitry for electronic systems according to engineering instructions, production specifications, or technical manuals.
  • Performed mechanical assembly, acceptance testing and calibration of flow meters for domestic and international customers.
  • Perform Mil - Spec electrical verification and final acceptance tests of military weapons microwave devices.
  • Conduct audits of MEMS analog/digital microphones on automated and manual acoustic machines using LabVIEW software.
  • Communicated with and assisted team members from diverse cultural backgrounds to promote morale and productivity.
  • Maintain and enhance job-related skills by self-teaching or participating in appropriate training and development programs.
  • Follow electrical schematics and mechanical drawings to duplicate equipment needed to expand manufacturing production capacity.
  • Tuned replacement driver boards to system specifications before they were directly shipped to customers.
  • Contracted by Fortune 100 Corporation to make advanced electrical engineering concepts a reality.
  • Worked on composite problems where data analysis requires an evaluation of identifiable factors.
  • Contracted during phase two facility Start up for electronics reconfiguration and retrofits.

Show More

28. ESD

average Demand
Here's how ESD is used in Electronic Test Technician jobs:
  • Operated in an ESD sensitive and 9000/9001 certified environment.
  • Followed ESD procedures and written safety rules.
  • Followed strict ESD protocols Performed system level automated initial/final acceptance tests.
  • Performed electrostatic discharges (ESD) for readers and CSD's.
  • Follow all ESD safety procedures Refurbishing of final product.
  • Followed: IPC-J Std 001E; ESD procedures; Seagate Hard Drive Handling procedures.

Show More

29. PLC

average Demand
Here's how PLC is used in Electronic Test Technician jobs:
  • Fabricated PLC-based radio controlled propulsion system, diversifying company's scope of capabilities.
  • Developed a custom controller interface for an award-winning HPLC automation project.
  • Converted Antiquated relay logic controlled machinery over to PLC controlled machines.
  • Utilized personal computer to troubleshoot/repair manufacturing equipment that was PLC controlled.
  • Developed quality verification camera line system using PLC based controllers.
  • Accomplished some PLC modification and Ladder logic program modification projects.

Show More

30. Data Entry

low Demand
Here's how Data Entry is used in Electronic Test Technician jobs:
  • Enter and track all data including failures, solutions and defects using travelers and data entry.
  • Perform Final Inspection, and Data Entry.
  • Utilized Hewlett-Packard's Quality Center application for manual and automated test execution, defect documentation, and data entry.
  • Performed clerical and data entry functions to support testing documentation.
  • Completed required paperwork or data entry per instructions.
  • Developed software and Office macros to assist with data entry, photo and table population in reports, and file management.

Show More

31. QA

low Demand
Here's how QA is used in Electronic Test Technician jobs:
  • Recommended system changes to improve efficiency of documentation in the current revision of the final QA inspection of outboard product.
  • Calibrated and repaired units to proper specifications before sending to QA for final inspection.
  • Performed QA for Final Assembly, Test, and Shipping departments.
  • send it to next steps or finalize it to QA,QC.
  • Solder components for fiber optic boards and related devices Troubleshooting boards and test set ups Assemble devices Performed QA tests.
  • Perform QA/QC validation for issues regarding mechanical and software configuration prior to customer delivery.

Show More

32. RMA

low Demand
Here's how RMA is used in Electronic Test Technician jobs:
  • Evaluate test data to support facility investigations and troubleshooting, while characterizing Torpedo system and component level operating performances.
  • Verified the efficiency of the electronic and cosmetic components of equipment to pass normal quality specifications.
  • Provide engineering with clear and complete information, diagnostic steps and gathering information as necessary.
  • Upgraded electronic boards to increase performances and engineer corrections order to have better electronic functions
  • Used specialized test equipment to document test results and operation performance of electronic assemblies.
  • Test production assemblies and sub-assemblies for correct operation and compliance to performance specifications.
  • Tested and repaired electronic/electrical components that ensured high reliability and performance standards.
  • Collaborated with other team members to develop objectives and maintain network performance.
  • Performed functional test to validate sub-system performance after off-site vibration test cycles.
  • Maintained an engineering log book with accurate, up-to-date testing/troubleshooting information.
  • Performed component test station quality and conformance testing.
  • Documented test data and quality control information.
  • Test communication and information systems.
  • Perform electrical and environmental testing including thermal, thermal vacuum, vibration and functional tests on flight hardware and wire harnesses.
  • Test electronic circuit card assemblies (CCA) using Automated Test Equipment (ATE), environmental chambers and thermal chambers.
  • Tested electronics units, using standard test equipment, and analyze results to evaluate performance and determine need for adjustment.
  • Modified, calibrated, tested, and repaired electronics used in Electronic Fuel Injection systems for the automotive aftermarket.
  • Perform electrical, thermal, thermal vacuum & dynamics testing on flight avionics, circuit board to box level.
  • Experience includes thermal and vibration testing, JTAG boundary scan and functional verification of assemblies and circuit boards.
  • Tested and formatted computer hard drives utilizing Active Kill to fully write zeros to all hard drives.

Show More

33. Electronic Systems

low Demand
Here's how Electronic Systems is used in Electronic Test Technician jobs:
  • Performed computer aided testing and environmental test on various electronic systems and subsystems.
  • Prepared weekly assessment of key electronic systems to ensure efficiency operations.
  • Tested and monitored electronic systems using Environmental Chambers and Vibration Platform.
  • Experience with testing and troubleshooting of electrical and electronic systems.
  • Tested, aligned, repaired and quality inspected complex electronic systems including analog, digital and RF systems.
  • Test, troubleshoot and repair the electronic systems of various water craft.

Show More

34. Failure Analysis

low Demand
Here's how Failure Analysis is used in Electronic Test Technician jobs:
  • Performed failure analysis and provided recommendations to management for corrective action.
  • Provide assistance to Quality Engineering for failure analysis.
  • Performed failure analysis and made significant scrap reduction.
  • Performed data/failure analysis to increase first-pass yield.
  • Perform root cause failure analysis of various products and circuits.
  • Performed Testing, Failure Analysis and Troubleshooting.
  • Work part time in the component failure analysis lab.

Show More

35. Technical Support

low Demand
Here's how Technical Support is used in Electronic Test Technician jobs:
  • Team lead and technical support putting extra time in to assure quality products are ready upon delivery.
  • Provided Technical Support to Customer service, Engineering, Sales, and Purchasing Departments daily.
  • Traveled to various customer locations in the U.S. for on-site maintenance and technical support.
  • Provided technical support to customers and sales reps via phone and email.
  • Provided technical support for a manufacturer of high voltage power supplies.
  • Provided training and technical support throughout these processes.

Show More

36. System Level

low Demand
Here's how System Level is used in Electronic Test Technician jobs:
  • Performed system level testing on power supplies, monitors, keyboards and full up diagnostic medical ultrasound imaging systems with transducers.
  • Tested, troubleshot, repaired X-ray generators at the board and system level, in-house and from field.
  • Worked with the products from the board to the system level.
  • Board and system level test.
  • Tested and performed system level troubleshooting of missile guidance systems, possessed secret security clearance for work on confidential projects
  • Operated internally-developed test equipment to both Calibrate and Test system level products associated with inertial navigation.

Show More

37. Test Systems

low Demand
Here's how Test Systems is used in Electronic Test Technician jobs:
  • Operate standard laboratory test equipment and automated test systems with windows/PC integration.
  • Advise Management on accuracy and effectiveness of test systems.
  • Operate automated test systems utilizing test software.
  • Performed usage of computerized, automatic and semi-automatic test systems and specialized test adapters, cables, and break out boxes.
  • Assisted in the process of debugging new software for various test systems.
  • Operated computer-aided test systems using Lab View on Windows 3.1.
  • Perform routine repairs and maintenance of test systems and equipment.
  • Calibrate and diagnose different kind of test systems.
  • Operate chambers and shakers using computerized test systems.
  • Operated Automated Test Systems (ATS).
  • Utilized various test systems; I.N.T.A.S., Sprint S.A.R.T.S., I.T.S., M.L.T.
  • Operated test systems working with Teradyne and Sentry Test Systems.

Show More

38. Function Generators

low Demand
Here's how Function Generators is used in Electronic Test Technician jobs:
  • Used Multi meters, Power supplies, & Function Generators

Show More

39. IPC

low Demand
Here's how IPC is used in Electronic Test Technician jobs:
  • Certified IAW with IPC/WHMA-A-610E Certified Application Specialist (CIS).
  • Certified IAW IPC J-STD-001F Certified Application Specialist (CIS).
  • Certified in IPC 610 for Class 3 electronics.
  • Certified IPC and QIS training.
  • Hand solder per work instructions and IPC 610 Class 3.
  • Obtained IPC-A-610 Certification and ROHS Soldering Certification

Show More

40. Mechanical Assembly

low Demand
Here's how Mechanical Assembly is used in Electronic Test Technician jobs:
  • Performed electronic and electro-mechanical assembly; promoted to a lead position and trained new hires.
  • Perform complex Electro-mechanical assembly including component replacement, wire harness repair.

Show More

41. Computer System

low Demand
Here's how Computer System is used in Electronic Test Technician jobs:
  • Fabricated, calibrated, tested and shipped digital image processing computer systems for hospital, laboratory and college universities.
  • Automated test programming on Capable 4200 computer system to perform automated board-level testing.
  • Used knowledge of digital electronics, microprocessors and computer systems to troubleshoot equipment.
  • Configured computer systems with specialized data acquisition hardware and software.
  • Maintained Computer systems running both Linux and Windows machines at Jones audio ensured software, security, network and machine functionality.
  • Performed remote access to application server to run software updates to all computer systems.
  • Maintained two Capable 4200 computer systems and repaired to the component level.
  • Test and component level repair of TI 990 Microcomputer System boards
  • Test and troubleshoot boards, class 3 electronics, modules and advanced computer systems for space programs.

Show More

42. Schematic Drawings

low Demand
Here's how Schematic Drawings is used in Electronic Test Technician jobs:
  • Performed redlining of procedures to update revisions on testing documentation and schematic drawings of MFD and AFDL products.
  • Read blueprints and wiring diagrams and schematic drawings applying knowledge of electronic theory and components.
  • Assemble control panels and other components from blueprints and schematic drawings.
  • Interpret blueprints, wiring diagrams, schematic drawings, and engineering instructions for assembling electronics units.
  • Created schematic drawings and implemented Engineering Changes in the event of a system modification.

Show More

43. Engineering Department

low Demand
Here's how Engineering Department is used in Electronic Test Technician jobs:
  • Worked closely with Engineering department on new product development.
  • Collaborated with engineering departments to solve complex problems.
  • Worked closely with Engineering department in evaluating updates made to existing product lines and new product lines
  • Worked in support of the engineering department to test new products and reported operational data.
  • Maintain and repair functional and in circuit test equipment with minimum assistance from engineering department.
  • Assist engineering department on research and development of new products.

Show More

44. Schematic Diagrams

low Demand
Here's how Schematic Diagrams is used in Electronic Test Technician jobs:
  • Test and troubleshoots to component level on fiber optic media converters, MUX and optical modems based on schematic diagrams.
  • Utilized schematic diagrams, production documentation, electronic test equipment and test fixtures to test scanheads.
  • Analyzed electronic circuits and schematic diagrams to determine device/component functionality; produced technical reports and final analysis and submitted to customer.
  • Analyze schematic diagrams to facilitate the troubleshooting of electronic equipment, and isolating faults within a digital communications network.
  • Gained extensive experience in analyzing and following manuals, schematic diagrams, blueprints and other specifications.
  • Repaired and configured electronic systems at the component level utilizing schematic diagrams and specification manuals.

Show More

45. Assembly Drawings

low Demand
Here's how Assembly Drawings is used in Electronic Test Technician jobs:
  • Analyze test results utilizing schematics and assembly drawings.
  • Experienced in building product from assembly drawings and wiring diagrams.
  • Debug or troubleshoot MIC's using subassembly drawings and schematics, tuning gain and/or flatness per customer approved specifications.

Show More

46. R

low Demand
Here's how R is used in Electronic Test Technician jobs:
  • Involved with work on energized equipment and must understand and comply with Division Safety Manual and technical manual operating instructions.
  • Conduct on-site logistics and technical support, Test reviews, Resolution of Operational testing issues/ Regression analysis.
  • Enforced enhanced Quality Assurance/Quality Control Program to ensure proper repair and maintenance of all equipment.
  • Handle the tasks of performing preventive maintenance and electrical safety testing of diagnostic imagining technologies.
  • Position responsibilities included the programming and testing of single-board computers which contained embedded technologies.
  • Reduced product overhead by effectively troubleshooting circuit problems with electronic circuit modules.
  • Tested assembled components for circuit continuity and operational reliability using test instruments.
  • Worked closely with production engineering staff to resolve production and/or customer issues.
  • Create Calibration Program to problem-solve and execute additional standards to ensure efficiency.
  • Arrange merchandise for testing by fabricating system components from raw material inventory.
  • Used Microsoft based computer programs ensuring functionality of internal electronic boards.
  • Provided exceptional customer service during communications, installations, and troubleshooting.
  • Tested consumer products for safety and reliability under controlled laboratory conditions.
  • Performed Module and Printed Circuit Card Assembly analysis and troubleshooting.
  • Conducted the installation and operation of electronic equipment and systems.
  • Consulted with engineering personnel to resolve unusual problems with schematics.
  • Conducted field return analysis/sorting and functional tests * Repaired 4402 printers
  • Finished products of oil-field cathodic-protection equipment: repaired defective components.
  • Coordinated test and experiments with other departments for on-time delivery.
  • Completed final and in-process quality assurance inspection of all products.

Show More

47. DVM

low Demand
Here's how DVM is used in Electronic Test Technician jobs:
  • Operated variety of assembly tools, test equipment such as Oscilloscope & DVM.
  • Used Schematics, Assembly Drawing, DMM, DVM, Voltage regulators, Power Supply, Automation Test Text Fixture.
  • Trouble shot production failures to component level with aid of schematics and O-scope and DVM.
  • Isolated defects in circuit boards using DVMs, Oscilloscopes, and visual inspections.
  • Operated standard test equipment, DVMs, spectrum analyzer, frequency converters and precision test equipment.

Show More

48. Test Software

low Demand
Here's how Test Software is used in Electronic Test Technician jobs:
  • Analyze test software and hardware; support the development of new products from initial concept to development.
  • Utilized boundary scan and test software to insure proper operation of numerous and complex circuitry.
  • Gained experience with test software installing system firmware.
  • Experienced with Novell, UNIX, and Windows based test software.

Show More

49. Unix

low Demand
Here's how Unix is used in Electronic Test Technician jobs:
  • Tested memory, processor, and utility boards using UNIX workstation and diagnostic scripts.
  • E-Promed, tested, troubleshot, & repaired final products using Unix.
  • Performed calibration and certification on UNIX based automated test equipment.
  • Utilized logic analyzers, digital scopes, Unix, workstations, and in-circuit emulators for testing and troubleshooting.
  • Maintained in-depth knowledge of electronics, and electronic troubleshooting to include UNIX and C/ATLAS operating system software.
  • Worked with various types of operating systems such as Windows, Unix, and Linux.

Show More

50. Apple

low Demand
Here's how Apple is used in Electronic Test Technician jobs:
  • Performed functional testing and troubleshoot various types of Apple computer devices according to company specification.
  • Maintained extensive knowledge of consumer electronics, especially apple products.
  • Use of Apple's GSX (Global Service Exchange) self-service portal on a daily basis.
  • Provide AppleCare service and support for entire line of Apple iPad tablets.

Show More

20 Most Common Skill for an Electronic Test Technician

Component Level18.9%
Oscilloscopes11.8%
Test Procedures11.2%
PCB6.5%
Test Cases6.4%
Analog5.2%
Trouble Shooting4.7%
Frequency Counters3.8%

Typical Skill-Sets Required For An Electronic Test Technician

RankSkillPercentage of ResumesPercentage
1
1
Component Level
Component Level
14.1%
14.1%
2
2
Oscilloscopes
Oscilloscopes
8.8%
8.8%
3
3
Test Procedures
Test Procedures
8.4%
8.4%
4
4
PCB
PCB
4.8%
4.8%
5
5
Test Cases
Test Cases
4.8%
4.8%
6
6
Analog
Analog
3.8%
3.8%
7
7
Trouble Shooting
Trouble Shooting
3.5%
3.5%
8
8
Frequency Counters
Frequency Counters
2.9%
2.9%
9
9
PCS
PCS
2.6%
2.6%
10
10
Spectrum Analyzer
Spectrum Analyzer
2.5%
2.5%
11
11
Electrical Systems
Electrical Systems
2.2%
2.2%
12
12
ISO
ISO
2%
2%
13
13
SMT
SMT
1.9%
1.9%
14
14
Debug
Debug
1.8%
1.8%
15
15
Circuit Boards
Circuit Boards
1.8%
1.8%
16
16
Setup
Setup
1.8%
1.8%
17
17
Surface Mount
Surface Mount
1.8%
1.8%
18
18
Hand Tools
Hand Tools
1.7%
1.7%
19
19
Electronic Assemblies
Electronic Assemblies
1.7%
1.7%
20
20
Signal Generators
Signal Generators
1.6%
1.6%
21
21
Final Test
Final Test
1.5%
1.5%
22
22
Electronic Test Equipment
Electronic Test Equipment
1.4%
1.4%
23
23
Network Analyzers
Network Analyzers
1.4%
1.4%
24
24
DMM
DMM
1.3%
1.3%
25
25
Test Stations
Test Stations
1.2%
1.2%
26
26
ICT
ICT
1.1%
1.1%
27
27
AC
AC
1.1%
1.1%
28
28
ESD
ESD
1%
1%
29
29
PLC
PLC
1%
1%
30
30
Data Entry
Data Entry
0.9%
0.9%
31
31
QA
QA
0.9%
0.9%
32
32
RMA
RMA
0.9%
0.9%
33
33
Electronic Systems
Electronic Systems
0.8%
0.8%
34
34
Failure Analysis
Failure Analysis
0.8%
0.8%
35
35
Technical Support
Technical Support
0.8%
0.8%
36
36
System Level
System Level
0.8%
0.8%
37
37
Test Systems
Test Systems
0.7%
0.7%
38
38
Function Generators
Function Generators
0.7%
0.7%
39
39
IPC
IPC
0.7%
0.7%
40
40
Mechanical Assembly
Mechanical Assembly
0.7%
0.7%
41
41
Computer System
Computer System
0.7%
0.7%
42
42
Schematic Drawings
Schematic Drawings
0.7%
0.7%
43
43
Engineering Department
Engineering Department
0.6%
0.6%
44
44
Schematic Diagrams
Schematic Diagrams
0.6%
0.6%
45
45
Assembly Drawings
Assembly Drawings
0.6%
0.6%
46
46
R
R
0.6%
0.6%
47
47
DVM
DVM
0.6%
0.6%
48
48
Test Software
Test Software
0.6%
0.6%
49
49
Unix
Unix
0.5%
0.5%
50
50
Apple
Apple
0.5%
0.5%

15,512 Electronic Test Technician Jobs

Where do you want to work?