Electronics technician jobs in Brandon, FL

The Controls Technician is a subject matter expert related to Building Automation Systems, their component parts, and related equipment. This position will responsible for implementing, troubleshooting, and maintaining a variety of components within the overall Building Automation System. All technicians within the Facilities Department are expected to work as a team for the betterment of the facility. For the best interest of the patients, visitors, and staff and due to the criticality of the systems under the purview of Facilities Department, all team members are to be first responders to facility emergencies, regardless of system or cause. Minimum of five (5) years building automation control system installation and repair.

** PAY RATE: $33/hr ** MUST BE US CITIZEN Worker will be training on 1st shift (6am-230pm) for 30-60 days, depending on how long it takes the worker to pick up the training, then transition to weekend shift (6pm-630am) Friday through Sunday. 1. Do you have a HS Diploma/ GED and are a US Citizen? 2. Do you have a minimum of two years experience with general test equipment including oscilloscopes, digital multi-meters, and power supplies? (all three) 3. Do you have any formal technical training from an educational institution or the US military? 4. Are you self-motivated and able to work with little supervision, consistently taking the initiative to get things done before being asked by others or forced by events? 5. Are you able to keep detailed test logs, follow detailed test procedures without error, and pass along information verbally and written? Performs hands-on diverse technical tasks related to testing Inertial and Guidance Electronics products. In addition to hands-on testing across a wide variety of environmental conditions, the Technician will assist in preparing test documentation and reviewing test work instructions and procedures. This job entails dynamic, thermal, and functional testing. It includes the ability to set-up, program, and operate special test equipment for the program to perform Acceptance Test Procedures. It also requires lifting and handling fixtures as well as the ability to handle and manipulate delicate inertial hardware and circuit card assemblies. Must be able to keep detailed test logs, follow detailed test procedures without error and provide daily pass-along shift information (both verbal and written documentation). Key Responsibilities · Execute on cleanliness/standardization, Safety, equipment/lab maintenance and Operating System tasks on a daily basis; demonstrate commitment to continuous improvement. · Daily interaction with both test technicians and engineers. Communication and Teamwork skills are extremely important. YOU MUST HAVE · High School Diploma or GED · Due to Government regulations, U.S. Citizenship is required · 2+ years of experience with General Purpose Test Equipment (i.e. Oscilloscope, DMM, Power supply, Dewetron, data acquisition devices) WE VALUE · Familiar with computers/computer applications (i.e. Word, Excel,) · Be able to find effective solutions based on root causes; and apply six sigma procedures. · Sound technical judgment and opinions. · Good interpersonal skills with ability to work effectively with other individuals in a team or project setting. · Individuals who are self-motivated and able to work with little supervision, who consistently take the initiative to get things done, do things before being asked by others or forced to by events. · Ability to consistently make timely decisions even in the face of complexity, balancing systematic analysis with decisiveness.

Work for a corporation that believes in developing our people. Applied employees believe in the company and love the environment. Individual contributors with fresh ideas and passion for excellence are encouraged and rewarded. Connect with a great stable company with strong performance and growth. Applied Industrial Technologies is seeking a Hydraulic Field Service Technician to join its Fluid Power Division. Job description Travel required, up to 150miles, including possible overnight. POSITION SUMMARY Troubleshoot, diagnose and repair hydraulic systems and components both in the branch and off site (customers and other locations.) ESSENTIAL FUNCTIONS Troubleshoot hydraulic systems and components. Diagnose problems, prepare estimates for repairs. Repair and install new systems in the field. Keep work area/truck clean and organized. Maintain proper inventory on service vehicle. Maintain a professional image and relationship with customers. Identify new business opportunities while on customer premises. POSITION QUALIFICATIONS - SKILLS AND ABILITIES Experience should demonstrate proficiencies in the following areas: Ability to determine how a system should work and how changes in conditions, operations, and the environment will affect outcome. Skill to formulate a sound decision using available information. Ability to pay attention to the minute details of a task. Work at customer site in accordance with their work rules. Education: High School degree or equivalent Experience: Five years hydraulic experience Skills taught after hire as needed: ISO Training, Safety Training, Product Training, System Design, Quality Training Other Requirements: Valid Driver's License, Acceptable Motor Vehicle Record Travel Requirements: Travel required WORK ENVIRONMENT: Works in indoors/outdoors in an uncontrolled environment Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule: 8 hour shift Monday to Friday

Starship Technologies is revolutionizing deliveries with autonomous robots. These robots are designed to deliver food, groceries, and packages across college campuses and neighborhoods in minutes. Starship has now completed millions of autonomous deliveries to date, traveled millions of miles and is currently doing more than 140k road crossings each day. Our contribution to society includes reducing congestion, and pollution, providing zero-emissions deliveries, increasing the quality of life for residents, empowering seniors and disabled people, and enabling affordable delivery for local businesses. We're hitting records on an almost weekly basis. Now is an exciting time to join as we grow rapidly around the world! The environment will be similar to a fast-paced restaurant/workshop while allowing you to plunge into a cutting-edge technological environment working directly with our autonomous robots. Our Robot Technicians will execute robot fleet repair throughout the shift, troubleshoot unexpected situations that may arise, and work effectively to keep our robots in operation. Job Responsibilities: Technical Tasks: Maintaining the health of our global fleet of robots through daily maintenance and repair tasks. Which can include but is not limited to - diagnosing unforeseen problems, troubleshooting equipment malfunctions, and repairing or replacing faulty equipment (tires, electronics, motors). Carrying out preventive maintenance activities and upgrades on robots and infrastructure. Monitoring and servicing our internal systems, running tests and completing reports, and completing updates or improvements to existing systems as appropriate. Perform root cause analysis to identify the causes of faults or problems and systematically develop a solution to prevent/solve underlying issues. Operational Tasks: Accurately document all tasks/partner or internal messaging related to service concerns or robot-related issues using appropriate applications/tools. Maintain a clean and organized hub by performing accurate spare parts inventory audits twice a week and ensuring all tools are accounted for and returned to their proper location after use. Work with our engineering team to identify any potential improvements regarding robot health and design. Assist our Operational Team and vendors/merchants by providing in-person assistance through performing weekly Merchant Preflights to understand any service-related issues, provide operational and troubleshooting assistance related to Starship-provided devices, and act as a Starship brand representative while interacting with clients. Occasionally support our Operational Service team by assisting with Robot field rescues or operational services tasks when needed. Other duties as assigned. Minimum Qualifications: A passion for robots and innovative technologies. Currently pursuing a degree in Engineering or another related STEM field. Previous experience in Technical Support and with any service desk application is beneficial, but not required. Good knowledge regarding mechanics, electronics, and IT. Excellent client-facing skills. Self-starter; takes initiative, can work without supervision and begin projects independently. Experience & Education Requirements: Knowledge of Unix/Linux systems, CLI tools, and scripting preferred, but not required. Hobby projects in electronics or mechanics. Previous experience in managing a large fleet of devices. Physical Requirements: Movement ability to frequent usage of wrists, hands and finger dexterity to movements such as constant typing, as well full-body exertion while wrangling the robot fleet. Occasional lifting of items with weight up to 70 lbs. Comfortable riding an ebike on various terrain. What's in it for you? Opportunity to work on industry-leading self-driving delivery robot technology on a uniquely large scale, creating history and making things happen You can immerse yourself in the world of technology and innovation You will have a chance to work with people with a strong inner burning and motivation. We are self-aware and seek feedback and improvement. We don't want to wait until we are told what needs to be done but take it as a matter of pride to figure out solutions for topics in various teams and areas You'll have endless opportunities to learn from our inspirational, talented team members across the globe Ready to join our Starship fleet? Apply today! Job Type: Part-time with flexible hours Only candidates who send resumes will be considered. Please include your availability when applying. Early application is encouraged. Check out our website to find out more about us: ************************

Unite Contracting is hiring a Marine Electrical Technician based in Tampa, Florida for full-time, year-round work. This is a permanent W2 position-not offshore, not seasonal. You'll perform marine electrical maintenance, troubleshooting, and motor control work on tugboats, push boats, and crew boats at ports across the Tampa region. Local travel only - no per diem Overtime available for after-hours service calls Company truck and gas card provided Compensation & Benefits $35.00-$40.00 per hour (depending on experience) Company vehicle + gas card Health, dental, and vision insurance Referral program Year-round job security We are an inclusive employer and welcome qualified applicants from all backgrounds, including those with prior convictions What You'll Do Perform electrical service calls, repairs, and maintenance on marine vessels (tugboats, push boats, crew boats) Install and maintain switchboards, controllers, motors, circuit breakers, alarms, and lighting systems Run cable, mount electrical equipment, and perform terminations and hook-ups Troubleshoot electrical systems using meters and diagnostic tools (voltmeters, ohmmeters, phase rotation indicators, etc.) Conduct insulation resistance tests on electrical cables and recommend repairs or replacements Maintain an inventory of electrical parts and assist with requisitions Support installation or modification of marine electrical systems (no shore-based or offshore work) Requirements 5-7 years of marine electrical experience (required) Proficiency with motor controls, power distribution, cable installation, and terminations Ability to read and interpret electrical diagrams and technical documentation Valid driver's license; willing to travel locally to multiple ports in the Tampa area Commitment to safety, quality workmanship, and professionalism Schedule Full-time | 40-60 hours per week Day shift | Monday-Friday 8-, 10-, or 12-hour shifts depending on workload Overtime available for emergency or after-hours service calls Apply Today If you're a skilled Marine Electrician looking for steady work, competitive pay, and a supportive team environment, Unite Contracting wants to hear from you. Apply now to join a growing company that values your expertise and offers the tools to help you succeed.

JOB TITLE: RF Test Technician - 1st Shift PAY RATE: $26-30/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Shift: 4/10 - 1st Shift (Thursday-Sunday, 3:30 PM-2:00 AM; overtime available on weekends) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Set up test apparatus and conduct tests on electronic circuit card assemblies (CCAs), RF circuits, and subassemblies following defined methods, procedures, standards, and sequences Assemble and layout production electronic equipment based on designs and specifications Adjust and calibrate electronic systems as needed to meet performance standards Diagnose and correct malfunctions by adjusting or replacing components as directed Utilize hand and small power tools, as well as various measuring and testing devices, to perform job duties Determine appropriate tests, analyze results, and recommend modifications or improvements to testing equipment and manufacturing processes Assist engineers in developing test procedures for new products and suggest product or process improvements Monitor and verify product quality in accordance with statistical process controls or other quality procedures Troubleshoot to the component level using schematic diagrams to isolate failures in analog, digital, and RF circuitry Work in a dynamic production environment, maintaining high productivity to support customer schedules Proficient in the use of oscilloscopes, digital multimeters, network analyzers, frequency standards, signal generators, and RF power meters Requirements: High School Diploma or equivalent required; Associate degree in Electronics or related technical training preferred Minimum 1 year of hands-on technical experience testing electronic assemblies Extensive RF testing experience Proficient in component-level troubleshooting of solid-state, digital, and RF circuits Experience setting up and operating electronic test equipment Familiarity with flying probe and/or high-power testing Strong analytical and documentation skills Experience working in structured production or lab environments Comfortable using Microsoft Office Suite and data collection programs to document results Hands-on practical troubleshooting experience emphasized over theoretical knowledge Familiarity with radar systems (testing, troubleshooting, or maintenance) Ability to demonstrate hands-on technical skills during interview Strong understanding of analog, digital, and RF circuit theory Knowledge of production test methods, calibration techniques, and performance verification standards Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Job Description As a result of our phenomenal growth, MSS Solutions, LLC has an opening for a Senior Project Technician - Controls. If you are an experienced professional who is looking to grow your career and contribute fresh and innovative ideas to serve our customers, this is an opportunity you should explore! A career at MSS is not just a job -- it's collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives. The success of MSS is a direct reflection of our team's dedication, passion, and hard work. Since 1996, MSS has taken pride in retaining some of the best talents in the industry by promoting a culture of respect, collaboration, and empowerment. Role and Responsibilities Demonstrated experience in startup, commissioning, and programming building automation and controls systems. Demonstrated ability and knowledge of a variety of electronic or digital controls systems with ability to startup, test and make modifications in a variety of controls software system languages. Responsible for device testing (end-to-end), program downloading, equipment start-up and operations. Handle all day to day and escalated customer relation issues. Ability to interpret control drawings, plans and sequence of operations. Capable of hardware installation, software programming, diagnosis and repair of DDC systems at customer locations. Ability to interface and consult with the customer or contractor during site assessments. Ability to represent the company to commercial, industrial and institutional customers. Ability to interface and communicate with customers to ensure a high level of customer satisfaction. Manage all aspects of small projects without the support of the Project Manager. Effectively documents work performed by completing necessary paperwork on each job to include: entering daily time, detailing scope of project progression, and maintaining an electronic database. Maintain customer/contractor satisfaction for continual company growth. Lead in coordinating onsite project initiatives and represent the project team as the lead technician on assigned projects. Assist in monitoring the installation labor of subcontractor to ensure quality standards and project schedule are met. Willing to participate in company training and self-study to improve and maintain technical proficiency in program platforms. Complies with all company safety policies. Other such duties and responsibilities as assigned by the Company from time to time. Qualifications and Requirements Successful candidate(s) will possess a with a minimum of five (5) years of controls field experience. Programming capabilities may include, but not be limited to: Niagara platform, Johnson Controls, Trane and Honeywell Building Management Systems. Must have a minimum of five (5) years demonstrated experience in startup, commissioning, and programming building automation and controls systems. Physical Demands: Occasional sitting, frequent stooping, crouching, kneeling, balancing, and climbing. Constant standing, walking, reaching and gripping. Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to talk and hear. Occasional lifting up to 50 lbs. (maximum solo lift) and constant lifting to 25 lbs., placing this position in the very heavy physical demand classification (PDC). Material Handling: Frequent lifting up to 50 lbs. and constant lifting up to 25 lbs., placing this position in the very heavy physical demand classification (PDC). Valid driver's license and acceptable driving record required. Must successfully pass a background check & drug test. High School Diploma or Equivalent preferred. Work Environment: Exposure to weather, extreme heat or cold, high noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to toxic or caustic chemicals, wet and/or humid, vibration, proximity to moving mechanical parts, working high exposure places. Benefit Highlights At MSS, we value our employees by providing a supportive culture with competitive compensation and a benefits package that continues to evolve based on our business's growth and our employees' needs. Currently, our benefits include: Medical/Dental/Vision Insurance 401k with Employer Contributions PTO Paid Holidays Employee Assistance Program Long-term Disability Short-term Disability Flexible Spending Plan Health Savings Plan Additional Notes If you are unable to apply electronically and require an accommodation, please contact ************************. MSS Solutions, LLC is an equal opportunity employer and a drug-free environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. MSS Employees, please visit the MSS Career Center or contact HR to apply.

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Job DescriptionSalary: $22 - $29 / Hour Robison Contracting Incorporated (RCI) is a construction firm focused on Building Americas Infrastructure. Specifically, RCI is focused on the electric utility sector. We are developing a team of dedicated electrical technicians to help us commission and perform service and maintenance on Utility Scale Central Solar (PV) Inverters and Energy Storage Systems. RCIs founders are performance driven leaders looking to build our team around ourP.R.O.model.People,Resources, and Opportunity.RCI is always building the team with the right People. The right people buy into the culture, are competent, and take ownership of their work & community. RCI will provide paid training to technicians with an electrical background. This position will be 100% travel as we are building a dedicated team of specialists to travel to various project locations, perform their duties, and move on to the next. RCI technicians will work on multi-employer work sites and need to represent RCI's team and clients with the highest level of integrity and professionalism. It is not always the case, every project is different, however, technicians should be prepared to work long hours, with a potential to work more than 65 hours in a given work week. Qualified candidates shall be prepared to travel, have experience with troubleshooting electrical equipment, crimping data cables, software uploads, use a computer and use PPE properly around electrical equipment. Preferred Experience working in electrical utility/industrial environments: Minimum of a basic background in electrical equipment & distribution systems (120V to 480V); this should include proper training & use of PPE equipment for the systems being worked on. Prefer minimum of five (5) years experience working with electrical systems. Ability to diagnose & troubleshoot electrical systems, use multimeter, and test & make data cables. Job related technical knowledge of electrical systems such as panelboards, switchboards, generators, UPS systems, DC voltage systems, fire alarm systems, etc. Ability to communicate effectively with audiences that include but are not limited to customer, management, coworkers, clients, vendors, contractors, and visitors. Ability to attend to detail and work in a time-conscious and time-effective manner. Ability to use/develop troubleshooting techniques for various electrical/mechanical systems in both standard and high-stress situations. Other Job Requirements Tasks will include physical labor; examples include working on ladders, ability to carry minimum 65lbs, use of PPE equipment, ability to obtain forklift/manlift operators license, etc. Working conditions include various levels of environmental conditions including but not limited to generally favorable indoor workspace, outdoor workspaces, moving mechanical parts and vibration; high, precarious places, fumes or airborne particles and extreme temperatures and high noise levels. Travel to required location. Travel will vary depending on the project and location.For most, this is a 100% travel position. Preferred Qualifications OSHA 10 or higher. Obtained TWIC. PowerSafe Training for Electrical Utilities. Must have good verbal and written English communications skills. Work effectively with multi-cultural personnel to execute work assignments. Strong interpersonal and mentoring skills and organizational accountability processes Good multi-tasking skills Proficient in MS-Office programs or G-Suite RCI is a Drug Free Workplace, all applicants should be aware RCI's customers often require a drug test prior to working on their project site. RCI technicians could be drug tested multiple times in a given year. RCI may also require a background check prior to submitting an offer. RCI is an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

Josko Services, LLC is seeking an experienced Electrical Technician specialized in multi-family and residential services to join our team in Apopka and Tampa, Florida. The ideal candidate will have a solid background in electrical systems, maintenance, and repair, with a minimum of 3 years of hands-on experience in the multi-family housing sector. This role requires a detail-oriented professional who can thrive in a fast-paced environment while ensuring the highest standards of safety, quality, efficiency, and customer service. Responsibilities: Perform installation, maintenance, and repair of electrical systems in multi-family and residential install repairs according to local codes and safety standards. Conduct thorough inspections and troubleshooting to identify electrical issues and implement effective solutions promptly. Collaborate with contractors, engineers, and project managers to ensure seamless coordination of electrical work within multi-family residential projects. Read and interpret blueprints, schematics, and technical documentation to effectively execute electrical tasks. Adhere strictly to safety protocols and regulations while maintaining a clean and hazard-free work environment. Provide technical guidance and mentorship to junior technicians as needed. Requirements: Minimum of 3 years of proven service experience in electrical work, specifically in multi-family residential settings. Proficient knowledge of electrical systems, wiring, circuits, and components relevant to multi-family housing. Journeyman electrician's license in the state of practice. Ability to read and interpret blueprints, technical drawings, and schematics accurately. Strong problem-solving skills and the ability to perform tasks efficiently and independently. Excellent communication skills and the capacity to collaborate effectively within a team environment. Commitment to upholding safety standards and ensuring compliance with local electrical codes and regulations. Physical ability to perform tasks requiring bending, lifting, and working in various conditions. · Willing to work overtime, on weekends and holidays. Preferred Qualifications: Additional certifications or training in electrical systems or related fields. Experience with low-voltage systems or renewable energy solutions. Knowledge of energy-efficient electrical practices for multi-family residences. Benefits: Competitive compensation package commensurate with experience. Health insurance, vision, dental, paid time off, and other benefits. Opportunities for professional growth and development within a dynamic and expanding company. Josko Services, LLC is an equal opportunity employer and values diversity in the workplace. We encourage candidates of all backgrounds to apply. Benefits: Dental insurance Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Schedule: Monday to Friday On call Weekends as needed

**A Snapshot of Your Day** **As a Mechanical Maintenance and Repair Specialist with Siemens Energy you will be joining a team at a cutting-edge investment casting facility. You will ensure peak performance of advanced vacuum furnace systems at a cutting-edge investment casting facility. Each day involves hands-on troubleshooting, precision repairs, and collaboration with a safety-focused team. Working in a high-tech, high-precision environment, you help drive manufacturing excellence while continuously growing my skills. The role offers strong compensation, career development, and the chance to contribute to world-class energy solutions. Will be in the Gibsonton Florida location.** **How You'll Make an Impact** + **Conducting routine inspections and mechanical maintenance on vacuum furnaces, including pumps, seals, valves, actuators, and structural components.** + **Diagnose mechanical issues such as leaks, misalignments, and wear-related failures. Perform timely repairs to minimize production downtime.** + **Work with engineering and operations teams to improve furnace performance, reliability, and mechanical efficiency.** + **Maintain detailed records of mechanical inspections, repairs, and modifications. Ensure adherence to safety protocols and mechanical standards.** + **Support Production Operations Provide mechanical support during furnace cycles, startup/shutdown procedures, and emergency situations.** **What You Bring** + **Evidence of Associate's degree or technical certification in Mechanical Engineering, Industrial Maintenance, or related field is required and 5 years or more of mechanical maintenance experience in an industrial or manufacturing setting.** + **Experience with vacuum furnaces, thermal systems, or casting equipment is highly preferred and strong understanding of mechanical systems, hydraulics, pneumatics and familiarity with vacuum systems.** + **Skilled in using precision tools, gauges, and alignment instruments with ability to read mechanical drawings and schematics excellent troubleshooting and teamwork skills.** + **Certifications (Preferred): OSHA 10/30 and forklift and overhead crane operation or welding brazing certification (a plus) and ability to drive Root Cause driven improvement processes to include managing and following through on action items to completion.** + **Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization.** + **This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law.** **About the Team** **Gas Services** **Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.** **Who is Siemens Energy?** **At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.** **Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.** **Find out how you can make a difference at Siemens Energy:** ************************************************ **Rewards** + **Career growth and development opportunities** + **Supportive work culture! Sign in Bonus and Weekly Pay** + **Great Company-paid Health and wellness benefits** + **Paid Time Off and paid holidays!** + **401K savings plan with company match** + **Family building benefits and parental leave** **************************************** Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Sets up test apparatus and conducts tests of electronic circuit card assemblies, RF circuits and subassembly units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications. Adjusts and calibrates electronic assembly systems as required. Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications. May monitor and verify quality in accordance with statistical process or other control procedures. Troubleshoots to the component level. Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry. Requires a strong knowledge of Solid State devices and micro-circuitry. Works in a dynamic production environment and is able to produce at a high level in support of customer schedules. Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards, signal generators, and RF Power Meters. Basic Qualifications : 1 year of direct experience with testing electronic assemblies Proficient in component level troubleshooting of solid state, digital, and RF circuits. Able to use Microsoft Suite and other data collection programs to accurately document maintenance actions. Flying probe/high power test experience Desired skills : Extensive RF Testing experience Familiarity with Radar Systems Typical Minimums : High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Work Hours: Monday - Friday, 7:00am - 3:30pm (Standby on Rotation) Expected Starting Hourly Range: $27.61 - $34.51 This classification performs a variety of advanced technical duties related to operating, maintaining, installing and troubleshooting instrumentation, process control and Supervisory Control and Data Acquisition (SCADA) systems for the County's waste/water treatment plants or wastewater lift stations system. Working Conditions Indoor/Outdoor situation; high noise environment while performing certain responsibilities. Lifting equipment up to 50 lbs. alone; up to 100 lbs. with assistance. Essential Functions These are intended only as illustrations of the various types of work performed. The omission of specific duties does not exclude them from the position. Facilitate/perform the implementation, coordination, supervision and maintenance of the SCADA Network. Responsible for configuring, documenting and programming of the automation and control systems. Responsible for all control aspects of in-house projects including design, programming, simulation, testing and start-up. Perform general electrical work such as program VFDs, troubleshoot motor control panels and pull wire occasionally. Perform preventative and corrective maintenance of instrumentation of waste/water treatment plants, lift stations, and related facilities. Perform necessary adjustments and calibrations of instrumentation by using prepared chemical standards and portable electronic meters and related calibration equipment. Install new equipment and wires units according to electrical codes and schematics and diagrams provided; troubleshoot and make repairs to all existing equipment. Use test equipment such as multi-meters, digital voltmeters, digital calibrators, digital logic probes, oscilloscopes, SWR meters, TDR analyzers, frequency measuring meters and other pertinent electrical and electronic measuring devices. Calibrate all existing electrical equipment instruments with the use of calibration equipment mentioned above. Service and repair hydraulic, pneumatic, hydro-pneumatic and elector-pneumatic instrument/control systems. Prepare necessary records and reports; prepare drawings, sketches and schematics. Install, repair, maintain, and configure the radio telemetry system for all Manatee County lift stations, booster stations, monitoring wells, and elevated tanks (Demands on Area of Assignment). Install, diagnose, repair lift station control panels or RTU control panels as necessary when electricians need assistance (Depends on Area of Assignment). Install, maintain, diagnose and repair field instrumentation used in control systems or for data acquisition in the telemetry system. These may be, but are not limited to flow meters, pressure transmitters, level sensors, rain gauges, vibration sensors inclinometers, proximity switches, turbidimeters, PH sensors, chlorine, and ammonia analyzers. (Depends on Area of Assignment). Design new control systems and new data acquisition monitoring applications when necessary. Bench test radio equipment to determine if it needs repair. Perform any training that needs to be given to new instrument technicians, as well as training of electricians and mechanics on any equipment. Perform other related work (including weather or other extreme emergency duties) as required. High school diploma or equivalent certificate of competency. Prior courses or technical training in electronics, instrumentation and controls required. Minimum of Five (5) years' experience in repair, inspection, adjustment, and calibration of electronic controls and instrumentation. Valid driver license required, with valid Florida Driver License within 30 days of hire. Equivalent combinations of education and experience may be considered. PLC & HMI programming, instrumentation, computer science and industrial controls highly desired. Knowledge, Skills and Abilities: Knowledge of principles and practices of SCADA systems, specifically as applied to preventative and corrective maintenance of SCADA, including its electrical, electronic, pneumatic, microprocessor and other instrumentation components at water treatment plants. Knowledge of methods of operation of modern equipment and instrumentation of water and wastewater treatment plants and related facilities and of work hazards and appropriate precautionary measures. Knowledge of PLC and SCADA programming with Rockwell (RSLogix 500, Panelview, DeviceNet), Citect, Siemens and DFS. Knowledge of databases, ODBC, SQL, Microsoft Excel, Windows OS. Knowledge of networking, switches, radios, wireless communication, fiber optics, ethernet com. Knowledge of 4-20mA principles and HART communication. Knowledge of VFDs and soft start programming, installation and troubleshooting. Knowledge of antenna theory and related test equipment used to diagnose transmit/receive problems with radio telemetry systems. Knowledge of tagging conventions, data logging and reporting, Boolean logic and symbol conventions. Knowledge of external paging, alarming and reporting actions. Knowledge of telemetry systems. Knowledge of Autocad. Knowledge of high and low voltage equipment and all types of flow meters, recorders and transmitters. Knowledge of programmable logic controllers (PLCs), indicators, controllers, and other sensing equipment. Knowledge of scientific, electronic instrumentation of chemical monitoring systems repairs. Ability to read and understand programmable logic controllers (PLCs) ladder logic, function blocks and structured text. Ability to read, interpret, prepare and verify control schematics, diagrams, electrical schematics, blueprints, piping layouts, and single line drawings. Ability to read and understand specifications, instructions and recommendations. Ability to distinguish colors. Ability to apply theory, experience, and training in a logical and systematic fashion. Ability to effectively deal with problems on a priority basis and investigate all possible causes before arriving at a conclusion. Ability to establish and maintain effective working relationships with plant/field personnel, supervisor, and others. Ability to work inside and outside in variable humidity and weather conditions, in noisy conditions, with solvents, on slippery and uneven surfaces, on or with moving objects, below ground level, in water, with odors and unusual fatigue factors; ability to perform strenuous work in adverse weather environments. Ability to climb and descend ladders and stairs and towers. Ability to work from aerial platform or bucket truck to and perform repairs to antenna and coaxial cables. Ability to lift and move up to 50 pounds. Ability to safely operate/drive a vehicle (car or pickup truck). Ability to work emergency situations as required; ability to work after hours when needed and participate in a "standby" schedule. Ability to work on and around medium to high voltage.

Benefits: * Competitive salary * Dental insurance * Health insurance * Opportunity for advancement * Paid time off * Training & development * Vision insurance Why Join the Team? Paul Davis is an industry leader in restoration and reconstruction for insurance providers and commercial properties throughout the United States and Canada. We are growing locally and have career opportunities for individuals who want purpose out of their work. We love creating an opportunity for our team members and providing industry training. Built upon principles of customer service, dynamic decision-making, and leadership, we have the tools to continue our rapid growth. Our team emphasizes living our Vision, Mission, and Values to be more than just a service provider. You are essential to coordinate teams effectively and ensure that jobs are performed profitably. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. This position is responsible for: * Professionally represent the PD principles of honesty and integrity * Retrieve affected electronics and electrical items from the lost site as needed * Inventory affected electronics and electrical items as needed * Testing of affected electronics and electrical items * Identify non-restorable items * Restoration cleaning of effective electronics and electrical items * Repackage clean electronics for storage and return * Complete evaluation report as needed to document damages/restoration * May be able to make minor repairs. * Professional utilization of applicable cleaning equipment * Secure storage of clean electronic and electrical items as needed * Assist the Cleaning and Pack-Out Crew in restoring customers' belongings affected by fire, water, or smoke damage * Subcontractor assignments, paperwork, including invoice review and submission for payment * Convey all necessary information to the content estimator for estimated completion * Maintenance and upkeep of electronic cleaning equipment * Proactive communication with management and team leaders Candidates must: * Will be hard-working, self-motivated, exemplary work ethic, and a team player * Workers are required to lift up to 50 pounds, walk, or stand for most of the shift * Have reliable transportation * Valid driver's license with a clean driving record * Must be able to pass a drug screen * Have a clean criminal record. * Experience helpful but on-the-job, training will be provided * Bi-lingual English/Spanish a plus We are a growing company and have a priority on promoting from within so future opportunities will be available for a hard-working dedicated employee to grow with the company. * This is a 40hr/week year-round position * We offer Paid Time Off as well as Paid Holidays. * A valid Driver's License with a clean driving record preferred * Must Be Able to Pass a background check and drug screen We have high standards for performance and quality but reward all of our A-Players with opportunities for advancement! Ask about our Paul Davis Leadership program if you are interested Compensation: based on experience Benefits: * Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities. * Monthly cross-training opportunities to advance your career. * Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time. * Paid training * Health, dental, and vision insurance * Life and Long-term Disability Insurance * Bonus program for performance * Referral program * IRA after 1 year of employment * Paid Holidays * Great culture and team dynamic * Overtime (time and a half) available * Hourly pay: $17.00 to $18.00/hour based on experience and certifications. Schedule: * 8 hour shift * Monday to Friday, possible night/weekends if urgent situation We thank all interested applicants; however, only those candidates being considered for an interview will be contacted. Equal Employment Opportunity Paul Davis of Tampa will provide equal employment opportunities (EEO) to all associates and applicants for employment regardless of race, color, religion, national origin, gender, sexual orientation, gender identification or expression, age, disability, marital status, amnesty, genetic information, carrier status or any other legally protected status as a covered veteran in accordance with applicable federal, state, and local laws.

ERS is a specialty disaster recovery company focused on restoration of machinery, electronics, appliances, musical instruments, and other specialty items after fire, water, mold, and other losses occur. We are seeking a full-time electronics restoration technician. This person will be responsible to work with our team of technicians to conduct testing, disassembly, restoration (training provided), reassemble, and troubleshoot the items mentioned above. This position works primarily in our shop, but sometimes can take place in all kinds of environments after losses occur. Many times the loss sites are hot and without power. The ideal candidate will be an individual who loves to tinker with electronics/computers. This individual should demonstrate a team spirit, positive attitude, wise judgment, flexibility and patience with regard to fast changes in job demands. This person must execute tasks quickly and correctly as most jobs are time-sensitive, while demonstrating empathy as they work with customers in their most difficult moments. The ideal candidate must meet the following criteria: --Speak clear English (second language is a plus!) --Be flexible with last-minute changes to schedule/job priority --Have experience working on/troubleshooting electronics and appliances --Pass a criminal background and drug screen --Have a working knowledge of home appliance installation and home theater components/installation --Be willing to travel for short periods (up to a week at a time) up to 20% of the time --Be a team player The electronics technician may be called upon to assist operations in the field during packouts/delivery. This includes, but is not limited to: driving a company vehicle, digital inventory of items, detaching, packing, and assisting with transport to/from our shop, as well as on-site restoration work of items. Typical work schedule is Monday-Friday, 6:00am - 3:00pm, but some jobs may require the team ember to be flexible and stay late to complete before leaving for the day. Compensation: $14 - $20 per hour, depending on experience level. Benefits included: Paid holidays, paid time off (accrued after 1 yr), retirement plan with company matching, and a strong sense of fulfillment knowing that you are helping customers through their most difficult times! If this position interests you, please send us your resume! Job Type: Full-time Pay: $14.00 - $18.00 per hour Compensation: $14.00 - $18.00 per hour For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Prism Specialties Corporate.

Power Your Potential - Join the Power-Pole Team! Electronics Technician Department: Engineering | Status: Full-time | Non-Exempt Why Work at Power-Pole? We're not just building electronics-we're engineering adventure. As a leader in marine technology, Power-Pole is committed to performance, reliability, and innovation. Join a team that values quality craftsmanship and continuous improvement. At Power-Pole, we believe in fueling adventure through innovation. We're seeking an experienced Electronics Technician to support our Engineering team by assembling, testing, and troubleshooting prototype circuit boards for marine products that lead the industry. Join the Power-Pole Team! Benefits 100% employer paid - Employee/family health plan option available Health Savings Account (HSA) - with generous employer matching program Dental, Vision, Voluntary Life Insurance 100% employer paid - Employee Life Insurance, Short Term and Long-Term Disability Insurance Accident, Hospital and Critical Illness 401K with generous employer matching program Paid time off Holiday pay Employee Referral Program Mission Our mission is to share a sense of adventure with the world through our high-performance marine products while instilling and inspiring consumer confidence with superior service. What You'll Do: Assemble, modify, and repair developmental electronic circuit boards Diagnose and repair PCBA assemblies down to the component level Build and troubleshoot prototype circuits for R&D and warranty investigations Operate test equipment including oscilloscopes, multimeters, logic analyzers, and power supplies Read and interpret technical documentation-schematics, BOMs, debug guides, and test procedures Work with Engineering and Customer Service teams to analyze board failures and improve product performance Collaborate on quality goals and diagnostic efficiency Maintain safety and cleanliness standards in the Electronics Lab Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements What You Bring: 2-5 years of experience in prototype board assembly and troubleshooting Proficiency in soldering (through-hole and SMT), and strong knowledge of electronic theory Experience with lab test equipment and PCB diagnostics Ability to read complex technical documentation and work independently Strong communication skills and a team-first mindset Critical Thinking- Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Coordination- Adjusting actions in relation to others' actions. Active Learning- Understanding the implications of new information for both current and future problem-solving and decision-making. Learning Strategies- Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. Time Management- Managing one's own time and the time of others. Operation Monitoring- Watching gauges, dials, or other indicators to make sure a machine is working properly. Operation and Control- Controlling operations of equipment or systems. Complex Problem Solving- Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Quality Control Analysis- Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Language Skills- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills- Ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Problem Solving Ability- Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills- Basic personal computer skills Educational/Experience Requirements Preferred Associate degree in Electronic Assembler or a two-year technical degree/certificate in a related discipline Required High school diploma and 2-5 years related experience and/or training; equivalent combination. Working Hours 8:00AM - 5:00PM Monday through Friday, with one hour lunch Working Conditions/Physical Demands of the Position The work environment characteristics described here are representative of those typical in an electronics lab/productive environment. Tool use is required. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts, tools, and machinery. Work is generally performed near moving mechanical parts. In some instances personal protective equipment (PPE) will be required in this work environment. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms all in a repetitive manner. The employee must frequently lift and/or move up to 50 pounds. Work performed will be working with mostly DC and minimal AC. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer: Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law.

This is responsible technical work involving engineering planning, construction and/or compliance inspections. Incumbents in this job may also Perform duties of identifying, inspecting, and condition coding county utilities assets and provide an accurate inventory and condition of assets. Salary $41,808 -$68,993 Ideal Candidate The Hillsborough County Solid Waste Department is seeking an entry-level Engineering Technician to monitor solid waste activities at the waste-to-energy power plant for acceptable and unauthorized waste materials. Maintain accurate and up-to-date inventory and condition records for the power plant. Assist in the preparation of technical reports and documentation. Collaborate with team members to achieve departmental goals. Candidate must have the ability to be exposed to loud sounds and handle inordinate smells from trash and exposure to dirt-filled grounds. Candidate will also perform manual labor in a plant environment, exposed to heat, sun, high humidity, rain and other adverse weather conditions. Candidate will walk/stand for prolonged periods of time (approximately six (6) hours) per day. Candidate must have the ability to communicate effectively. Core Competencies Customer Commitment - Proactively seeks to understand the needs of the customers and provide the highest standards of service. Dedication to Professionalism and Integrity - Demonstrates and promotes fair, honest, professional and ethical behaviors that establishes trust throughout the organization and with the public we serve. Organizational Excellence - Takes ownership for excellence through one's personal effectiveness and dedication to the continuous improvement of our operations. Success through Teamwork - Collaborates and builds partnerships through trust and the open exchange of diverse ideas and perspectives to achieve organizational goals. Tier 2 Duties and Responsibilities Note: The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform one or more of the activities described below: Conducts compliance inspections on major building, civil, and utility construction projects to ensure conformance with regulations, standards and specifications. Reviews construction plans, drawings and specifications to ensure compliance with regulations and specifications. Attends preconstruction meetings with engineers and developers to discuss construction schedules and other issues. Drafts or revises plans and drawings from in-house projects, contractors designed projects, field notes or construction plans to ensure conformance with specifications and contract requirements. Inspects all materials and equipment delivered to the construction site to ensure that they meet specifications Conducts inspections of equipment to identify maintenance and repair needs Performs or monitors performance of field tests to ensure proper installations and conformance with standards and specifications. Observes work and work methods to ensure that the structure is built utilizing acceptable work practices Inspects work in progress and upon completion to ensure acceptable level of workmanship and compliance with plans and specifications Conducts re-inspections to ensure compliance; interviews contractor and employees to ensure that labor laws and regulations are being observed. Reviews citizen complaints, recommends or takes corrective action, or refers to appropriate office for resolution. Maintains project log, records facts concerning work activity, work force, equipment, inspection activities, accidents, visitors, weather conditions, and unusual happenings. Resolves differences between plans and specifications; Reviews contractor pay requests, change orders, progress schedules, and recommends approval/disapproval. Maintains records and reports used in daily inspections to document activities, work progress, daily diaries, testing, and change orders. Collects new feature data using GPS enabled devices (generally iPads) with a low-level of precision and edit attribute information Performs traffic studies and inspections; inventories signal counting stations and data collecting equipment; investigates complaints and requests and submits reports with recommendations. Orders supplies, maintains equipment, and performs other administrative duties. Explains/ interprets information/policies for employees, public, and other agencies. Operates a lightweight motor vehicle for travel to and from work sites; operates digital paging system, cell phone, mobile radio, etc. to communicate with others. In the absence of the supervisor, supervises the work of others by scheduling, assigning and reviewing work, providing training and counseling and evaluating performance. Performs related work as required. Job Specifications Knowledge of utilities construction practices, methods, techniques, trades, materials, equipment and safety practices. Knowledge of public works construction practices and procedures. Knowledge of basic mathematics; basic methods and techniques of engineering Strong familiarity with computers, tablets, and cameras. Knowledge of rules, regulations and ordinances relating to construction activities; departmental policies, procedures and guidelines; Knowledge in the usage of computer software: AutoCAD, MS Office, etc. Knowledge of the use and calibration of engineering instruments. Ability to read and comprehend construction and related codes, contracts and requirements; follow a logical line of inquiry and reach logical conclusions; Ability to use testing instruments Ability to read/interpret survey, engineering/architectural data, plans and specifications Ability to maintain records and prepare reports. Ability to read and interpret legal requirements of contracts; evaluate construction progress/complaints; recognize improper procedures, materials and workmanship Ability to verbally communicate moderately complex information; follow and explain moderately complex instructions and procedures Ability to work on multiple projects and have excellent time management skills so as to complete those projects on-time and within the budget Ability to establish and maintain effective working relationships with other employees, contractors' representatives, officials, and the general public. Physical Requirements Work is performed both in an office environment as well as outdoors depending on the area of assignment The employee is regularly required to sit, and also required to walk. Frequently required reach with hands and arms, and required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Work Category Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Minimum Qualifications Required Graduation from high school or possession of a GED Certificate; AND Three (3) years of experience in engineering support; OR An equivalent combination of training and experience that would reasonably be expected to provide the job-related competencies noted above; AND Possession of a valid Florida Driver's License. Emergency Management Responsibilities In the event of an emergency or disaster, an employee may be required to respond promptly to duties and responsibilities as assigned by the employee's department, the County's Office of Emergency Management, or County Administration. Such assignments may be for before, during or after the emergency/disaster. Career Progression Employees in this classification that acquire the competencies and minimum qualifications for the next tier will be able to apply for promotional opportunities through a competitive selection process. Employees will not automatically be upgraded to the next tier. Reclassifying a position is based on business need and financial impact and is not based solely on the job competencies or qualifications of the incumbent.

Salary starts at $28/hr The Engineering Technician (Carpenter) is responsible for the routine maintenance and repair of exhibit interactives, signage, lighting, and other display elements. This role ensures that exhibits, tools, and equipment remain organized and in optimal working condition. Key responsibilities include assisting the Exhibit and Life-Support Engineering (LSE) team with exhibit fabrication and installation, as well as working with other team members on regular exhibit upkeep tasks. The technician will also be accountable for maintaining all building surfaces such as plaster, drywall, millwork, and carpentry, and may be assigned to maintenance or life-support system projects as needed. The ideal candidate must have the ability to fabricate and repair acrylic, frame both metal and wood stud walls, and accurately read and interpret blueprints. Essential Position Functions Perform preventive and corrective maintenance on existing building facilities, Life-Support systems, exhibits and associated interactives as directed by management Meet with the LSE management to coordinate daily work schedules Conduct routine preventative maintenance of exhibit interactive's, display devices, and interpretive signage Conduct daily exhibit walkthroughs to identify and repair problem areas as needed Use creative problem-solving for exhibit maintenance, life-support and facility related issues Keep exhibit property, equipment, and tools organized and in good working condition Design/build low tech interactive exhibits, custom cabinets and display components Assist exhibit team with exhibit installation Conduct routine “housekeeping” tasks associated with exhibit maintenance including vacuuming, painting, and general repairs to existing materials Identify materials needed for projects and complete requisitions for the purchase of supplies and materials Work with Creative Services team to implement engaging exhibits Ability to work with metals, plastics, wood, acrylics and various other materials on a daily basis Must be flexible and capable of jumping from one project to another, depending on priority Support the development of small-life support systems Willing to be trained on LSE equipment and be responsible for the upkeep of associated equipment Recommend ideas for promoting a safe work place Anticipate problems or issues and responding accordingly Seek cost savings and participates in capital design when appropriate Maintain positive attitude in adverse situations Participate in on call rotation for after-hours emergencies Must follow all personal protective equipment (PPE) and safety requirements Required to pass certifications for forklift, boom lift, telehandler, and electric pallet jack operation Participate in on call rotation for after-hours emergencies May be required to work specific shifts due to project demands, which may include weekends, evenings and/or overtime as needed May be required to participate in rotating hurricane ride out team Adapt to workweek project schedule as this position is shared between the Engineering Department and occasionally the Creative Services Department. The work schedule will be determined by the Engineering Lead Deliver extraordinary customer service to all aquarium guests and internal customers Support TFA's Shared Purpose by participating in a Conservation Day of Action shift on an annual basis Perform other duties as assigned by Engineering Lead or Director of Engineering. Education Requirements and Technical Skills H.S. Diploma or GED Five years of significant experience in various trades Production-oriented skills; ability to use hand and power tools Familiar with basic mechanical, electrical devices Ability to read blueprints Willing to learn and take on different skills/trades Ability to build cabinet-grade exhibit furniture /devices a plus Familiar with woods, metals, acrylic, laminates, paints and other building materials Ability to work independently and with a team Ability to frame with metal and wood studs, build decks, stairs, and hang drywall Working knowledge of Windows environment helpful Ability to MIG, TIG, and Arc Weld is desirable but not a requirement Competencies Customer Service Orientation - Listening and understanding the customer (both internal and external) and anticipating and evaluating the customer's needs. Teamwork - Supporting, facilitating, and participating in activities that promote team effectiveness. Communication (oral and written) - Effectively expressing ideas verbally and non-verbally and actively listening to individuals and groups; expressing ideas clearly and concisely in written form. Concern for Detail - Pays attention to every portion of any task Creativity - Proactively combining ideas, resources and skills in new and adaptive ways to better meet outcomes and objectives. Planning and Organizing - Develop solid plans that support the short- and long-term goals of the Aquarium. Develop realistic ways to facilitate new interactive and interpretive media. Set priorities among competing requirements and allocate resources in the most efficient and effective way; developing contingency plans that anticipate changes in the work environment. Typical Physical Requirements Standing (up to 10 hours per day) on a 10-hour work day Walking (Up to 4 or more hours per day) Bending/Stooping -Frequently Climbing stairs - Frequently Climbing heights (8') - Occasionally to Frequently depending Crouching - Occasionally to Frequently depending Kneeling - Occasionally to Frequently depending Carrying (up to 80 lbs.) - Occasionally Lifting (up to 80 lbs.) - Occasionally Working near moving machinery - Frequently Ability to work around living collection of plants and animals Exposure to marked changes in temperature and humidity Exposure to dust, fumes and gases with PPE Typing on a computer keyboard Coping with demands (stresses that are associated with the job and/or the work environment so that acceptable levels of performance and overall contribution are maintained) Operating machinery Ability to travel (car) as needed Flexibility in working weekends and/or evenings Flexibility in working holidays Available for on-call emergencies

This is responsible technical work involving engineering planning, construction and/or compliance inspections. Incumbents in this job may also Perform duties of identifying, inspecting, and condition coding county utilities assets and provide an accurate inventory and condition of assets. Salary $41,808 -$68,993 Ideal Candidate The Hillsborough County Solid Waste Department is seeking an entry-level Engineering Technician to monitor solid waste activities at the waste-to-energy power plant for acceptable and unauthorized waste materials. Maintain accurate and up-to-date inventory and condition records for the power plant. Assist in the preparation of technical reports and documentation. Collaborate with team members to achieve departmental goals. Candidate must have the ability to be exposed to loud sounds and handle inordinate smells from trash and exposure to dirt-filled grounds. Candidate will also perform manual labor in a plant environment, exposed to heat, sun, high humidity, rain and other adverse weather conditions. Candidate will walk/stand for prolonged periods of time (approximately six (6) hours) per day. Candidate must have the ability to communicate effectively. Core Competencies Customer Commitment - Proactively seeks to understand the needs of the customers and provide the highest standards of service. Dedication to Professionalism and Integrity - Demonstrates and promotes fair, honest, professional and ethical behaviors that establishes trust throughout the organization and with the public we serve. Organizational Excellence - Takes ownership for excellence through one's personal effectiveness and dedication to the continuous improvement of our operations. Success through Teamwork - Collaborates and builds partnerships through trust and the open exchange of diverse ideas and perspectives to achieve organizational goals. Tier 2 Duties and Responsibilities Note: The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform one or more of the activities described below: Conducts compliance inspections on major building, civil, and utility construction projects to ensure conformance with regulations, standards and specifications. Reviews construction plans, drawings and specifications to ensure compliance with regulations and specifications. Attends preconstruction meetings with engineers and developers to discuss construction schedules and other issues. Drafts or revises plans and drawings from in-house projects, contractors designed projects, field notes or construction plans to ensure conformance with specifications and contract requirements. Inspects all materials and equipment delivered to the construction site to ensure that they meet specifications Conducts inspections of equipment to identify maintenance and repair needs Performs or monitors performance of field tests to ensure proper installations and conformance with standards and specifications. Observes work and work methods to ensure that the structure is built utilizing acceptable work practices Inspects work in progress and upon completion to ensure acceptable level of workmanship and compliance with plans and specifications Conducts re-inspections to ensure compliance; interviews contractor and employees to ensure that labor laws and regulations are being observed. Reviews citizen complaints, recommends or takes corrective action, or refers to appropriate office for resolution. Maintains project log, records facts concerning work activity, work force, equipment, inspection activities, accidents, visitors, weather conditions, and unusual happenings. Resolves differences between plans and specifications; Reviews contractor pay requests, change orders, progress schedules, and recommends approval/disapproval. Maintains records and reports used in daily inspections to document activities, work progress, daily diaries, testing, and change orders. Collects new feature data using GPS enabled devices (generally iPads) with a low-level of precision and edit attribute information Performs traffic studies and inspections; inventories signal counting stations and data collecting equipment; investigates complaints and requests and submits reports with recommendations. Orders supplies, maintains equipment, and performs other administrative duties. Explains/ interprets information/policies for employees, public, and other agencies. Operates a lightweight motor vehicle for travel to and from work sites; operates digital paging system, cell phone, mobile radio, etc. to communicate with others. In the absence of the supervisor, supervises the work of others by scheduling, assigning and reviewing work, providing training and counseling and evaluating performance. Performs related work as required. Job Specifications Knowledge of utilities construction practices, methods, techniques, trades, materials, equipment and safety practices. Knowledge of public works construction practices and procedures. Knowledge of basic mathematics; basic methods and techniques of engineering Strong familiarity with computers, tablets, and cameras. Knowledge of rules, regulations and ordinances relating to construction activities; departmental policies, procedures and guidelines; Knowledge in the usage of computer software: AutoCAD, MS Office, etc. Knowledge of the use and calibration of engineering instruments. Ability to read and comprehend construction and related codes, contracts and requirements; follow a logical line of inquiry and reach logical conclusions; Ability to use testing instruments Ability to read/interpret survey, engineering/architectural data, plans and specifications Ability to maintain records and prepare reports. Ability to read and interpret legal requirements of contracts; evaluate construction progress/complaints; recognize improper procedures, materials and workmanship Ability to verbally communicate moderately complex information; follow and explain moderately complex instructions and procedures Ability to work on multiple projects and have excellent time management skills so as to complete those projects on-time and within the budget Ability to establish and maintain effective working relationships with other employees, contractors' representatives, officials, and the general public. Physical Requirements Work is performed both in an office environment as well as outdoors depending on the area of assignment The employee is regularly required to sit, and also required to walk. Frequently required reach with hands and arms, and required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Work Category Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Minimum Qualifications Required Graduation from high school or possession of a GED Certificate; AND Three (3) years of experience in engineering support; OR An equivalent combination of training and experience that would reasonably be expected to provide the job-related competencies noted above; AND Possession of a valid Florida Driver's License. Emergency Management Responsibilities In the event of an emergency or disaster, an employee may be required to respond promptly to duties and responsibilities as assigned by the employee's department, the County's Office of Emergency Management, or County Administration. Such assignments may be for before, during or after the emergency/disaster. Career Progression Employees in this classification that acquire the competencies and minimum qualifications for the next tier will be able to apply for promotional opportunities through a competitive selection process. Employees will not automatically be upgraded to the next tier. Reclassifying a position is based on business need and financial impact and is not based solely on the job competencies or qualifications of the incumbent.