Electronics technician jobs in California

Job Title: Opto-Mechanical Assembly Engineer / Technician (1st and 2nd Shift) Work Schedule: On-site Rate: $36, Based on experience. Shift: Monday - Saturday 06 AM - 03:30 PM 03 / 04 PM or 12:30 - 02:30 AM (OT required) OT required on Saturday's Responsibilities: • Maintain tool schedules, complete alignment processes (milestones) per defined test times - work assignments that are moderately complex in nature where judgment is required in resolving problems • Support tool progression priorities -tests and troubleshoots assemblies and/or final systems • As required, prepares technical reports summarizing findings and recommending solutions to technical problems Additional Responsibilities: • Maintain test tooling, sending/receiving tooling to complete daily work activities (3rd party calibration) Top 3 Skills Needed: 1. Mechanical experience - hands-on mechanical work is essential. 2. Optical alignment experience - highly preferred. 3. Commitment for long-term - ability to work extended hours and sustain workload. Work Schedule: • 6 days/week (Monday-Saturday) • 10+ hours/day • Long-term engagement expected. Qualifications: • Minimum High School Diploma • At least 1 year of relevant experience (mechanical/optical) • Interview process will assess knowledge and skills. Interview Process: • 3 rounds in one day (~1.5 hours total): • Mechanical test • Written test • One-on-one interview Industry Preference: • Candidates from aeronautics or medical devices are good fits. • No fiber optics experience required. Requirements: • Performs the build, calibration, testing and troubleshooting of mechanical assemblies at a system level. • Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams. c. • Tests and troubleshoots assemblies and/or final systems. • May complete rework on assemblies and/or systems as a result of testing. • Prepares technical reports summarizing findings and recommending solutions to technical problems. May assist in the selection and set-up of specialized test equipment. • Requires experience in testing digital and/or analog systems • Ability to read complicated drawings, mathematics, handbook formulas, and a variety of testing and measuring instruments • An AA degree, military technical training or their equivalent vocational training is a +. • Will accept HS diploma with equivalent experience • Lift 50 lb requirement EXPERIENCE: • Typically requires a minimum of 2 - 4 years of related experience. • Looking for a person with strong mechanical, electrical and software skills. • NOT looking for PCB experience/ board TS. • More opto assembly BIG system level. About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Manish Rajput (****************** / *************** for more details.

Immediate need for a talented Technician: Equipment - IV. This is a 06+ months contract opportunity with long-term potential and is located in Santa Clara, CA(Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID: 25-93691 Pay Range: $30 - $35/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: Metrology Equipment Technician performs functions associated with photomask production including equipment and operations. The technician may be responsible for the buddy, trainer, and certifier levels and in charge of updating training manuals. The technician may participate in safety forums and Emergency Response Team as required. Work is somewhat complex and is performed within the spectrum ranging from narrowly defined parameters and limited judgement up to highlight complex and nonstandard assignments in nature and broadly defined parameters Key Requirements and Technology Experience: Key Skills; “faliure analysis(SEM/TEM)” , “Semiconductor manufacturing” Bachelor's degree (REQUIRED) in a related field (e.g. material science, physics, chemistry, electrical engineering, mechanical engineering) or equivalent experience = 5 or less years of work exp in field Experience with Metrology equipment (SEM, AFM, scatterometry, etc) preventive maintenance and equipment troubleshooting. Excellent attention to detail and problem-solving skills Ability to work independently and as part of a team. Our client is a leading Semiconductor Manufacturing Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

A global technology company is seeking a Legal Counsel to advise on export controls, sanctions, and compliance issues. This role is crucial for supporting international business activities, ensuring regulatory compliance, and conducting risk assessments. The successful candidate should have a strong legal background with at least 5-7 years of experience in a technology setting. The position offers a competitive salary range of $168,000-$232,000, along with various benefits for employee well-being and flexibility. #J-18808-Ljbffr

As an Engineering Technician, you'll assemble and maintain test systems, support vehicle engineering tests, and collaborate with engineers and technicians to ensure high-quality results. Responsibilities Wiring, low voltage (12v) Maintain and troubleshoot test equipment to minimize downtime. Assemble mechanical structures and prototype wiring per documentation. Perform light fabrication using machining, shop, and hand tools. Document faults, maintenance, and upgrades. Support vehicle tests such as powertrain durability, endurance, transmission abuse, and environmental systems. Transport vehicles and equipment; assist with test prep and driving on tracks and public roads. Communicate issues and provide feedback on equipment and test performance. Maintain a clean, safe workspace and follow safety regulations. Minimum Qualifications 3+ years of hands-on technical/wiring experience. Strong mechanical assembly and troubleshooting skills. Ability to lift 45 lbs and use hand tools. Excellent communication and organizational skills. Preferred Qualifications Experience with electrical harnesses and cable connections. Familiarity with hazardous material handling. Knowledge of CAN/LIN protocols. Experience with Jira, SharePoint, and Confluence. Background in vehicle systems-especially electric vehicles-or robotics. Experience with Advanced Driver Assistance Systems (ADAS) and thermal systems. Rate: $35-$40/hr

JOB TITLE: Field Service Technician Associate SCHEDULE: Standard Office Hours DURATION: 12-Month Contract PAY RATE: $14/hr We are seeking a Field Technician to support telecommunications network operations, specifically fiber optic transmission systems. This role involves equipment installation, maintenance, troubleshooting, and site oversight, ensuring customer requirements and network standards are met. The technician will work closely with senior staff and contractors to maintain and repair electronic components, with opportunities to gain hands-on experience in telecom infrastructure. Key Responsibilities Install, maintain, and troubleshoot fiber optic transmission equipment, including lightwave multiplexers, digital multiplexers, channel banks, circuit termination equipment, and DC power systems. Replace defective modules and track spare parts inventory. Perform preventative maintenance and maintain technical documentation. Maintain site security and cleanliness. Assist senior technicians in learning procedures for process and operations. Read and follow service orders and basic circuit diagrams. Qualifications / Relevant Experience High School Diploma or equivalent required. 0-5 years of field experience in telecommunications or electronic equipment maintenance. Working knowledge of personal computers, common software, and Sonet and Ethernet systems. Basic ability to read circuit diagrams and service orders. Willingness to learn and work under supervision of senior technicians. ...

Role: Electrical Engineering Technologist/ Electrical Technician/ Fabrication Technician Type: 3-6 months contract (with high chances of extension or conversion of FTE) While assigned to the Advanced Light Source, perform complex technical support in the field of electronics fabrication and installation in an accelerator environment. Determine methods and procedures on layouts, fabrication and installation of a broad variety of custom electronics hardware, including chassis fabrication, wiring, cabling, printed circuit board loading and equipment installation. Perform measurements and calculations necessary to achieve desired results. DUTIES/RESPONSIBILITIES: As a skilled specialist, using considerable judgement and initiative, fabricate and/or install complex electronics hardware including chassis, instruments, printed circuit boards, cables, wiring harnesses, equipment racks and consoles, and control and instrumentation cross-connect / inter-connect cabling systems. Understand implications of tasks and makes recommendations to achieve goals. Exp in hand-hold power tools is a huge plus. Electrical safety experience Operate a large variety of hand, power, and machine tools of the trade. Read and interpret schematics, sketches, parts lists, and component layout diagrams. Follow generalized written or verbal instructions. Select appropriate components, packaging enclosures and manufacturing techniques and procedures. Implement appropriate codes and standards associated with the trade. Interact with engineers, designers and electronics coordinators on matters relating to finished product design, technical performance and documentation criteria. Provide input to cost estimates and production/installation scheduling. POSITION QUALIFICATIONS: Substantial technical understanding of electronics fabrication and installation techniques, procedures, codes and quality standards. Substantial work experience in fabricating and installing the full spectrum of general electronics hardware and systems.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Job Description: At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We're looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we'll support yours of expanding your personal network and developing skills, whether you are new to the field, or an industry thought leader. At Northrop Grumman, you'll have the resources, support, and team to do some of the best work of your career. We are looking for you to join our team as an Electronic Technician based out of San Diego, CA. Roles and Responsibilities: The selected candidate's responsibilities include, but are not limited to: * Expediting, routing, and dispatching test equipment, materials, and ancillary components in support of specified Areas of Operation within their purview * Responsible for test equipment accountability, control, pick-up and delivery to and from end-users (customers) * Consistent communication with customers for status and recall of test equipment and ancillary components * Coordination of pick-up/deliveries and all applicable processing of and database updates in the Test Equipment Asset Management and Metrology System (TEAMMS), Calibration Management System * Accountable for reviewing and managing workload based on daily Coordinator Performance Reports, ensuring performance metrics remain within specific thresholds * Maintain excellent database integrity via inventory reconciliation of equipment between TEAMMS database, Pool/Stock Inventory and customer Areas of Operation * Coordination of shipping and receiving of vendor test equipment for Demo and/or evaluations. * Maintain separations of Program Direct Equipment charging. * Proficient in utilizing the TEAMMS data base for tracking, researching, and ordering new equipment (TEJ) * Maintain updated equipment charging database for accurate charging to IWO's * Continue weekly and daily charging distribution per program. Basic Qualifications for an Electronics Technician 4 position: * High School Diploma or General Education Diploma (G.E.D) required and minimum of 6 years' relevant experience * Experience in lab / flight test or an integration / R&D environment. Active DoD Secret clearance with ability to obtain and maintain program access (PAR). This PAR must be obtained in a reasonable amount of time as determined by the company to meet its business needs. * Must be able to regularly lift up to 30 lb. Preferred Qualifications: * Lead role experience, 5+ years of testing experience including planning, set-up, and test execution. * Experience with Fiber Optic Strain sensor fabrication, installation, and system operation * Experience with MIL-STD-1553 * Ability to assess anomalies and develop resolutions in conjunction with Engineering. * Ability to adhere to necessary processes, procedures, and protocols. * Ability to perform manual labor including but not limited to lifting and moving heavy test equipment, trench covers, often heavy cables and harnessing * Desire to learn and assume multi-disciplined technician roles such as: instrumentation, mechanical setup, dynamic testing, environmental/thermal testing * DoD Top Secret Clearance and SCI Primary Level Salary Range: $79,100.00 - $131,900.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job Code **5241** \# of Openings **2** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=5241) **Ghostrock, LLC** , a subsidiary of **Three Saints Bay, LLC** and a recognized leader in Federal Government contracting, is seeking an **Electronics Warfare Technician** to join our team in San Diego, CA. This role supports U.S. Navy Ships under the direction of **Southwest Regional Maintenance Center (SWRMC)** and serves as the technical **Subject Matter Expert (SME)** . **Position Responsibilities:** + Direct, oversee repair activities, train, troubleshoot, diagnose, and maintain the following: + **AN/SLQ-32(V6-V7) Electronic Warfare Systems** + **LEGACY SLQ (V1-V4)** + **Mk36 Decoy Launching System (SRBOC)** + **Mk53 NULKA Decoy Launching System (DLS)** + **AN/SSX-1 Signal Emitter Intercept** + **Associated LINUX based software and networks** + **Joint Tactical Terminal (JTT)** + Provide technical support for procurement, installation, at-sea testing, preventive/corrective maintenance, and lifecycle management of systems. + Interpret technical manuals, apply repair standards, and maintain accurate technical documentation. **Position Requirements:** + Must be a U.S. Citizen + Must be able to obtain an Active Security Clearance. + High School Diploma or equivalent + Associated Navy Schools + 6+ years of related experience with shipboard systems and associated systems + Experience in Battle Force Electronic Warfare Trainer (BEWT) **or** Surface Electronic Warfare Team Trainer (SEWTT), desired but not required. + _Bachelor's degree in electrical engineering, computer science or IT equivalent in lieu of Navy Schools and experience_ + Strong technical comprehension with the ability to read and interpret manuals and standards. + Effective communication skills and ability to work with minimal supervision. + Proficient with hand tools and multi-meters. + Proficiency with Microsoft Office and related technical applications. + Knowledge of 3M + Fiber Optics Technician Certificate + CompTIA Security+ **or** bachelor's degree in CS, IT, Engineering, or a related field **Physical Requirements:** + Frequent standing, walking, sitting, reaching, and handling tools/equipment. + Regular verbal and auditory communication. + Ability to stoop, kneel, crouch, and lift up to 50 lbs. + Ability to board naval crafts, navigating passageways and steep ladders. + Comfortable working in shipboard and industrial environments. **This position is located in San Diego, CA.** **The hourly wage for this position is $32.53 - $48.13 BOE.** VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Scientific Drilling is looking for a Electronic Technician to join our Applied Technologies Center in Paso Robles, CA. Scientific Drilling is an independent directional drilling and wellbore navigation, surveying and logging service company serving customers in oil & gas and sustainable geothermal worldwide. We are motivated by crafting innovative solutions to technically challenging problems that support and advance our energy future. Nestled between San Francisco and Los Angeles, the California Central Coast is described as the happiest place on earth. The area features 200+ wineries, fresh air, miles of beautiful beaches, and small-town appeal. Our Electronic Technician will work in our Manufactuing team and is expected to perform the essential duties listed below. Candidates must have authorization to work in the United States. Essential Duties and Responsibilities: * Tests electronic assemblies using a written procedure. * Uses multimeters and oscilloscopes to measure voltages and waveforms. * Troubleshoots test failures to board level. * Writes failure reports. * Works with Test Technicians to solve failures. * Responsible for the electronic equipment and tools in his or her work area. * Manages work station and practices good housekeeping techniques. * May be required to work overtime. * Pursues every job with drive and determination. * Uses logic to solve problems with effective solutions. * Performs other relevant duties as required. Job Knowledge, Skills, and Abilities: * Must be able to identify electronic components on schematics and circuit boards. * Must understand common electronic concepts, such as current, voltage, resistance, and Ohm's Law. * Must be able to read and understand electronic schematics. * The ability to use correct soldering techniques is a plus. * Ability to present oneself with professional appearance and behavior in accordance with ATC dress code and SDI Code of Conduct. * Ability to meet all SDI/ATC safety requirements. * Ability to understand and follow instructions. * Ability to read, communicate, and understand the English language. * Computer proficiency. * Ability to communicate effectively with managers and peers, both written and verbally. * Adhere to established company procedures and policies, work schedule, attendance standards and is punctual to work and meetings. * Contribute to team effort by accomplishing related results, as needed. * Possess the ability to be interactive with management staff and co-workers. * The ability to use a word processor and a spreadsheet is preferred. Education, Experience, Certification, and Training: * Requires a high school diploma or its equivalent. * An Associates Degree in Electronics or equivalent experience required. * 0-2 years experience in the field of electronics preferred. Location, Physical Requirements, and PPE: Manufacturing: * Ability to walk, stand, sit, kneel, push, stoop, reach above the shoulder, grasp, pull, bend repeatedly, identify colors, hear with aid, see , write, count, read, speak, analyze, alphabetize, lift and carry 25 lbs. and under, perceive depth, and operate motor equipment. * Conditions include working inside. Working around moving objects, machines with moving parts. Working around radiant and electrical energy. Work with heated soldering iron and flux. Working closely with others, working alone, working extended or irregular hours. Working environment may include but not limited to, intermittent noise, fumes, smoke, grease, dust, oils and solvents. * Equipment (machines, tools, devices) used in performing the essential job function include but not limited to computer and related equipment, calculator, special instrumentation, hand tools, power tools, air tools, microscope and telephone. Ability to wear proper personal protective equipment (PPE), including but not limited to, safety glasses, reinforced toed shoes, gloves, and ear plugs or muffs. This describes the general duties and responsibilities, and physical requirements associated with the position; it is not an exhaustive list of all duties, responsibilities, or skills required for the position. The general duties and responsibilities and physical requirements associated with the position are subject to modification in order to reasonably accommodate individuals with disabilities. Some physical requirements may exclude individuals who pose a threat or risk to the health or safety to themselves or others. This job description neither states nor implies that the listed general duties and responsibilities and physical requirements associated with the position are the only tasks expected of an employee. An employee is also required to follow any other job-related instructions and perform any other job-related tasks requested by their supervisor and not in violation of any applicable laws, regulations, or rules. Requirements are representative of minimum levels of knowledge, skills, and abilities. To perform this job successfully, an employee must possess the abilities and aptitudes to perform each duty, responsibility, and physical requirement proficiently. Employment at Scientific Drilling International is on an "at-will" basis.

Job Description Responsibilities: Execute cable manufacturing operations, trains junior technicians, ensures build compliance, and supports QA inspections. Perform standard cable build, soldering, and testing under supervision, ensuring adherence to IPC Class 3 workmanship standards. Support assembly and testing processes. Review schematics and other technical documentation. Maintain, clean, and perform basic upkeep of equipment. Communicate updates and technical issues to Lead. Requirements: U.S. Citizenship and Active DoD Secret Clearance. Must have IPC/WHMA-A-620 Certified Specialist (CIS), J-STJ-STD-001 Certified Specialist (CIS) and Connector Assembly Qualification. Minimum 2-4 years of cable assembly experience. Must have ability to stand, walk, sit, use both hands, and carry/lift to 50 lbs. Must be able to execute installation/lifting of heavy equipment and use of/climbing ladders. Proficiency in crimping, soldering, and harness build rework. Capable of reading and following cable drawings and travelers. $29 - 32hr. What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck! Powered by JazzHR O4iL80KAeq

⚡ Electronic Technician - MotorsportsLocation: Santa Clarita, CACompensation: $28 - $40 per hour Position Overview: We are seeking a motivated Electronic Technician to join our motorsports team. This role is responsible for testing, building, and maintaining electrical system components to ensure optimal performance. The ideal candidate will have hands-on experience with wire harness assembly, test equipment, and automotive electrical systems, along with strong problem-solving skills and the ability to thrive in a fast-paced environment.🔧 Key Responsibilities Test and build electrical system components to support system operations Debug builds and install looms or components as required Create or procure test equipment for hardware validation based on component requirements Assist Electrical Engineers with assigned tasks, ensuring timely completion and prioritization Research and validate new sensors and ancillary electrical components for future systems in coordination with Hardware Engineer or Electrical Supervisor Maintain and track all electrical and electronic hardware 🎓 Qualifications Minimum High School Diploma; trade school certificate or two-year degree preferred 1-2 years of experience in test equipment manufacturing and wire harness assembly Loom build and repair experience preferred Proficiency with harness production tools, test equipment, and automotive components (e.g., ignition systems, ECUs) Ability to prioritize and manage projects independently

Honda Racing Corporation USA, a leader in motorsports racing, is seeking several highly organized and detailed oriented Engineers, Technicians and CNC programmer/machinist to joins its racing program in Santa Clarita, CA: Chassis Development Engineer: Test, modify, and evolve hardware systems on race cars and track-focused road cars. Validate durability and performance against technical targets. Report lessons learned and document failures; manage problem resolution. Analyze logged data to identify root causes and devise countermeasures. Collaborate with designers and manage 3rd parties for design changes. Execute testing of countermeasure parts and new vehicle hardware updates. Specify instrumentation, perform data analysis, and write development reports. Innovate new testing tools and methods for track and rig tests. Development Engineer: Create development plans for concepts and components. Oversee full product life cycle from concept to production. Execute required tests and validations to meet project goals. Quality Engineer: Quality Control: Develop inspection protocols, validate measurement equipment. New Product Introduction & Corrective Actions: Lead cross-functional troubleshooting. Non-Conformance Management: Review issues, manage tooling calibration. Advanced Product Quality Planning: Conduct first article inspections, process validation. Data Analysis & Continuous Improvement: Generate reports, plan Six Sigma activities. Engine Dyno Technician: Set up/install/remove engines in test cells, configure instrumentation. Execute dyno tests, maintain equipment, review data, and report issues. Automotive Mechanics/Technicians: Build/rebuild racing chassis and hybrid systems. Perform quality checks, assembly, teardown, and inspection. Train new associates and support race car performance objectives. CNC Programmer/Machinist: Program CNC machines using MasterCam for high-performance engine components. Design fixtures/tooling and manage CNC setup and operation.

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

The Electronics Technician II maintains repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician II applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required, from supervisor or higher-level technician. VETS is an EEO Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, or disability. VETS is a SBA certified Service-Disabled Veteran-Owned Small Business (SDVOSB). Based in Ashburn, Virginia, VETS has a Southwest operations office in Sierra Vista, Arizona and contract management sites throughout the United States. VETS supports a growing number of U.S. Government defense and civilian agencies with technology, systems engineering, as well as construction and program management support services.

We are seeking a skilled Technician with expertise in assembling parts from subcomponents for motors. The ideal candidate will follow drawings, work instructions, and in-process inspection requirements to ensure high-quality assembly of stator windings and related components. Responsibilities * Assemble parts from subcomponents for motors following drawings and work instructions. * Operate equipment to make subcomponents, such as winders, presses, and cleats. * Cut and wind wire, insulate, and perform impregnation, buffing, painting, and testing of parts. * Interpret part drawings and engage in improvement discussions with technical support groups. * Participate in team efforts to solve departmental problems. * Position and fasten units to assemblies and subassemblies. * Connect and install electrical wiring and harnesses. * Measure dimensions and clearances of parts to determine tolerances using precision measuring instruments. * Test for mechanical reliability and inspect, test, and adjust completed units to ensure specifications are met. Essential Skills * Understanding of electrical theory and strong mechanical aptitude. * Proficiency in using precision measuring devices such as micrometers and calipers. * Significant mechanical knowledge and experience. * Excellent organizational skills and attention to detail. * Ability to read and interpret blueprints, complex assembly drawings, schematics, and diagrams. * Effective communication skills and ability to follow written and verbal instructions. Additional Skills & Qualifications * Minimum of 2 years' experience in winding AC and DC Motors, generators, or coils. * At least 8 years of related mechanical assembly experience. * High School Diploma or equivalent with related training. * Knowledge of AS9100 procedures is a plus. * Experience with lathe, mill, and drill press is desired. * Basic math skills, with algebra being a plus. * Flexibility to work overtime and travel as needed. * Excellent close vision and fine motor skills/manual dexterity required. Work Environment The role is based on a manufacturing floor environment. Candidates should be prepared to sit for prolonged periods, handle physical activities such as walking, standing, climbing, and lifting heavy items up to 50 lbs. Protective equipment must be worn as necessary. The work environment requires good eye/hand coordination and the ability to work well in a team. Pay and Benefits The pay range for this position is $20.00 - $33.15/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Chatsworth,CA. Application Deadline This position is anticipated to close on May 12, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

What we're building Our vision is to electrify all waterborne vessels, and we're starting with electric water sport boats. Gas boats dominate today's marine industry not because of great product offerings but because of a lack of better alternatives. Boaters have grown accustomed to vehicles that feel stuck in the 1980s: unreliable, expensive, loud, noxious, and a nightmare to own and operate. They're also awful for the water and air they reside in. By contrast, electric boats are superior in nearly every way: not only are they far more reliable and less costly to operate, but they're also quieter, quicker, and cleaner, with no fumes or pollutants. However, they've been held back by both the technology and the talent to make them truly competitive with gas alternatives. That's Arc's opportunity. Using modern, aerospace- and automotive-inspired techniques, we're building our hulls, batteries, cooling systems, firmware, and software together to deliver the next generation of watercraft. Who we're looking for We're looking for someone excited by our vision, eager for a challenge, and ready to learn on the job. We pride ourselves on transparency and operate in a lean, high-trust environment where everyone takes ownership of their domain. You will be a full-time member of our Production team, working from our manufacturing facility in Torrance, CA. This role will focus on assembling, testing, and troubleshooting electromechanical systems, while also contributing to process improvements and various production projects. As a startup, we move fast. You'll need to be adaptable, but the following responsibilities and qualifications will remain relatively constant. Core responsibilities Assembling and disassembling electric powertrain systems and instrumentation Advising on the design of assemblies, components, and testing Setting up and utilizing test equipment, including digital multimeters, HIPOT machines, and power supplies Performing component assembly inspections and complete documentation Contributing to improving workshop standards, protocols, and processes Basic qualifications Proficiency using mechanical and electric hand tools Experience in building and troubleshooting electromechanical systems, including electric motors, batteries, sensors, electronics, controls, and pneumatics Ability to read and interpret engineering drawings, work instructions, and product data sheets Ability to: Stand for extended periods (6-10 hours per day) Lift up to 50 lbs. Work extended hours as needed to meet production demands Bonus qualifications High school diploma or GED Prior experience in a fast-paced manufacturing setting Experience with welding, composites, or interiors At Arc, we encourage diversity and consider all qualified applicants equally for employment, regardless of background, identity, or status. You're always welcome to reach out even if you don't meet many of these qualifications. Passion and aptitude make up for a lot. Our values We value these five things above all else: Ownership over both your work and the company's success Empathy for colleagues and for customers Humility in problem solving and collaboration Pragmatism for navigating ambiguity quickly and sensibly Inclusion of different backgrounds, opinions, cultures, etc. We work in an intense but rewarding environment, so it's important that our values align. We'd be happy to elaborate during the interview process. What we offer Talented teammates that challenge you to be better Access and often input to a wide range of business activities An hourly wage between $31.50 - 42.00 A meaningful equity stake An opportunity to have an outsized impact on industry-defining vehicles The ability to drive positive environmental change through your work Nearly free health insurance (we cover 99%) and a 401k Generous parental leave Daily lunches at our office in LA, plenty of snacks, lots of swag, and more Boat rides! Hope to hear from you soon! The crew at Arc

Greetings: Hi, this is Mounika with Flexton, I have an amazing opportunity with one of our best clients in the Bay Area! Please have a look at JD below and drop your resume to *********************** or ************** if interested in applying!! *****Only W2***** Role: Electrical Engineering Technologist (Fabrication Tech.) Location: Berkeley, CA Type: 3-6 months contract (with high chances of extension or conversion of FTE) DUTIES/RESPONSIBILITIES: As a skilled specialist, using considerable judgement and initiative, fabricate and/or install complex electronics hardware including chassis, instruments, printed circuit boards, cables, wiring harnesses, equipment racks and consoles, and control and instrumentation cross-connect / inter-connect cabling systems. Understand implications of tasks and makes recommendations to achieve goals. Operate a large variety of hand, power, and machine tools of the trade. Read and interpret schematics, sketches, parts lists, and component layout diagrams. Follow generalized written or verbal instructions. Select appropriate components, packaging enclosures and manufacturing techniques and procedures. Implement appropriate codes and standards associated with the trade. Interact with engineers, designers and electronics coordinators on matters relating to finished product design, technical performance and documentation criteria. Provide input to cost estimates and production/installation scheduling. POSITION QUALIFICATIONS: Substantial technical understanding of electronics fabrication and installation techniques, procedures, codes and quality standards. Substantial work experience in fabricating and installing the full spectrum of general electronics hardware and systems. Ability to successfully accomplish assignments under only general guidance and limited supervision. Knowledge of and ability to use appropriate hand power and machine tools of the trade. Ability to perform design layouts requiring general measurements and calculations. Ability to read and correctly interpret schematics, sketches, parts lists, and component layout diagrams. Color vision sufficient to discern wiring and component color codes, and safety related colored signs, lamps and warning devices. Ability to climb stairs and ladders, work from heights and confined spaces, and lift 23 kg (50 lbs.). Thanks Mounika Ravi Sr. Technical Recruiter Cell | ************** Email: ***********************

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.