Electronics technician jobs in Concord, NC

Essential Duties and Responsibilities Program, modify, and optimize automation systems, including PLCs (Allen-Bradley/Rockwell, Siemens, Mitsubishi) and related controls. Diagnose, troubleshoot, and repair automated machinery, PLC-controlled equipment, sensors, motor controls, and electrical components. Read and interpret electrical schematics, control panel drawings, equipment manuals, and wiring diagrams. Work closely with engineering, maintenance, and production teams to support automation upgrades and process improvements. Perform system testing, debugging, and validation to ensure reliable operation and compliance with performance requirements. Maintain up-to-date backups, documentation, and revision control for all automation and PLC programs. Assist with the installation, startup, and commissioning of new automated equipment and control systems. Follow and enforce all safety procedures, quality standards, and regulatory requirements during automation work. Required Qualifications 3+ years of experience in PLC programming and troubleshooting in an industrial environment. Proficiency with HMI/SCADA systems and industrial communication protocols (Ethernet/IP, Modbus, Profibus, etc.). Strong understanding of electrical systems, sensors, actuators, and motor controls. Ability to read and interpret technical drawings and schematics. Excellent problem-solving skills and attention to detail. Willingness to work flexible hours or shifts as needed. Preferred Qualifications Associate degree or Technical Certification in Electrical Engineering, Industrial Automation, or related field. Experience with robotics integration or motion control systems. Familiarity with safety PLCs and machine safety standards (e.g., ISO 13849, ANSI B11). Knowledge of data acquisition and industrial networking.

Pay: $27.88/hr (Full Travel Reimbursement and 1.5 times overtime pay when you travel to locations) Full Time Permanent Job Title: Field Service Mechanical Technician The Field Service Mechanical Technician's primary function is to travel to customers' locations to perform on-site installations, servicing, and repairs for commissioning or warranty work on customer-finished products. Anticipated travel is 50-75% of the time, by car and/or plane. When not traveling, this role will work on the production floor to build and assemble parts, pipe fitting, and enclosures. Handle, move, load, and unload material, mostly heavy metal, by hand or using a variety of material handling equipment, including forklifts and overhead cranes in a high trafficking manufacturing environment. This role reports to the Field Services Site Supervisor. Key Responsibilities: Read and interpret drawings, blueprints, sketches, diagrams, and product specifications, and understand tolerances to determine assembly operations. Rig, hoist, move, and align sub-assemblies and components to storage areas or within the worksite using overhead cranes and forklifts, using established safety precautions. Fit and assemble simple and complex parts to build heavy industrial machinery and equipment according to drawings and product specifications. Install major components such as tanks, louvers, dampers, large-scale frames, generators, insulation, soundproofing systems, and building panels using hand and power tools. Inspect, test, examine, and investigate parts, sub-assemblies, and finished products to ensure quality and detect irregularities and malfunctions. Assist with documentation control and following company policies. Handle, move, load, and unload products and materials by hand or using material handling equipment, including forklifts, overhead cranes, and tow motors, operating established safety precautions. (Material handling) Provide feedback on design improvements through communication with the Supervisor and assist in preparing Engineering Change Requests. Ensure standards for safe working conditions are observed following OSHA, and participate in regular safety talks. Perform a visual inspection of equipment, including cranes, forklifts, cutters, and other tools, to ensure they are in safe working condition. Mentor and assist junior production members and other employees. Qualifications & Experience: Minimum 3-5 years experience in a heavy industrial equipment environment and mechanical assembly. Certificate in Crane and Forklift Operation. Previous experience working within an ISO9001 environment is preferred. Should be able to lift between 50-75lbs. Additional Requirements: Demonstrate knowledge and an understanding of OSHA. Understand how this position impacts the quality of products and services our customers provide. Ability to travel 50-75% within the US. Produce quality work (on-spec., on time, on a budget). Participate pro-actively in the continuous improvement process. Be self-motivated with a positive attitude and the ability to multi-task. Work well within a team environment. Strong problem-solving and analytical skills. Excellent organizational, interpersonal, and communication skills. Maintain a professional, clean and safe work area. Valid US passport preferred.

Measurement Technician - Rock Hill, SC GPS is seeking full-time Measurement Technicians for a leading manufacturer expanding operations in Rock Hill, SC. Founded in 1923, our client specializes in high-precision linear technology and mineral casting. Why You Should Apply: Direct-hire position - you'll be on the client's payroll from day one Comprehensive 90-day training in the Czech Republic (all expenses covered) Training pay rate: $18/hr Competitive pay rate after training: $30-$34/hr Full benefits package offered Excellent opportunity to advance your career with a global leader What You'll Do: Perform precision casting, accurately fit parts, and linear guides Verify products meet quality standards and specifications Use measuring programs and software to record and interpret data Follow production documentation, safety protocols, and company procedures Maintain accuracy, quality, and efficiency in all tasks Take precise measurements using highly accurate measuring instruments such as calipers, micrometers, and gauges What You Need: Associate's degree in Technical Studies Knowledge of metrology strongly preferred Craftsmanship and mechanical aptitude PC proficiency (Office 365 user-level) Familiarity with measuring programs and precision instruments Strong attention to detail and problem-solving skills Willingness to complete 90-day international training in the Czech Republic Training in the Czech Republic begins on 1/5/26. A drug-free workplace and a criminal background check are required. Take the Next Step If you're precise, detail-oriented, and eager to grow your technical skills, apply today to join a world-class team in Rock Hill, SC.

(Carolinas / Southeastern Region | Mostly Field-Based) Ultimate Staffing is seeking a skilled Field Service Technician with strong mechanical aptitude and hands-on experience in pumps and rotating equipment. This role supports customers across North Carolina, South Carolina, and parts of Virginia, performing maintenance, troubleshooting, start-ups, and on-site service for water treatment and industrial pumping systems. The ideal candidate brings 3-5 years of service or maintenance background, strong problem-solving skills, and the ability to work independently in the field. This role is primarily field-based with some remote administrative work. Light travel is required throughout NC, SC, and parts of VA. Key Responsibilities Field Service & Technical Work: Perform maintenance, troubleshooting, repairs, and start-ups on pumps, rotating equipment, and related water treatment systems. Complete mechanical and light electrical diagnostics on equipment in the field. Conduct system start-ups, verify proper installation, and ensure all operating parameters meet specifications. Provide on-site technical support to customers, ensuring issues are identified quickly and resolved safely and efficiently. Document service activities, including reports with notes, pictures, parts used, and completed tasks. Communicate effectively with the Service Coordinator and internal teams regarding scheduling, updates, and job progress. Coordination & Communication: (If candidate is capable, role could include aspects of service coordination) Communicate with customers regarding service needs, scheduling, and follow-up. Provide day-of support to ensure smooth service start-ups and job completion. Assist in coordinating with third-party resources for specialized start-ups when necessary. Work Schedule Typical Hours: Monday to Friday, 8:00 AM - 5:00 PM After-hours calls occasionally required (non-emergency, minimal weekend work). Travel within NC, SC, and parts of VA. Some initial training and onboarding will occur on-site or in-office; ongoing work is primarily field-based with administrative tasks. Qualifications 3-5 years of hands-on mechanical, maintenance, or field service experience preferred. Strong background in pumps, rotating equipment, mechanical troubleshooting, or industrial maintenance is required. Experience with diesel, centrifugal, rotary, or hydraulic pumps is a plus. Solid understanding of maintenance practices, system start-ups, and on-site diagnostics. Tech-savvy with the ability to use MS Office, especially Excel, and generate service reports with photos. Valid driver's license required Able to lift, load, and work with standard technician equipment/tools. No formal degree required-hands-on technical experience is the priority. Soft Skills Strong communication and customer service abilities. Ability to work independently, manage time effectively, and self-prioritize. Organized, dependable, and punctual. Comfortable interacting with customers on-site and representing the Premier Water brand. Problem solver with a calm, professional demeanor. Tools, Gear & Appearance Company-provided tools, truck, equipment, lifts, and PPE. Dress Code: Branded logo shirts, work pants, and closed-toed shoes required. Top Highlights of the Role Hands-on work with pumps and rotating equipment, ideal for mechanically skilled technicians. Mix of independent field work, maintenance, start-ups, and troubleshooting. Multi-state territory (NC/SC/VA) with strong organizational support and growth opportunities. Additional Notes Candidates located within the Charlotte, North Carolina territory are preferred, but location flexibility is possible for the right fit. Strong service background is key This position may be paired with a hybrid Service Coordinator/Field Tech role for candidates who can perform both functions. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

$25/hr - $35/hr + Relocation Assistance + Career Development + Company Tools Supplied + Medical + Dental + Vision + Holidays + Generous PTO + 401(k) + Comprehensive Company Benefits Charlotte, NC (Commutable from Shelby, Morganton, Lenoir, Lincolnton) Do you have a background in electrical maintenance with PLC knowledge and are looking for a stable daytime position? Would you like to work for a company that invests in training and progression while offering a consistent weekday schedule? This role offers the chance to join a global manufacturer recognized for its high standards and employee support. You'll have the opportunity to develop your skills further, move into higher-level positions, and enjoy structured pay progression, all while having access to quality tools and resources provided by the company. The organization produces specialist products for a range of industries and is expanding its maintenance team to meet increasing demand. This position would suit a technician with electrical and mechanical experience who wants long-term stability and career growth within a supportive workplace. The Role: Carrying out planned and reactive maintenance on production machinery Combination of mechanical and electrical tasks Day shift, Monday to Friday, 8am-5pm The Candidate: Background in both electrical and mechanical maintenance Competence in PLC fault finding and troubleshooting Looking for progression opportunities and long-term development To apply for this role or to be considered for further roles, please click "Apply Now" or contact Edward Chandler at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. keywords: Maintenance Technician, Multi-Skilled Technician, Electrical Maintenance, Mechanical Maintenance, PLC Technician, Industrial Maintenance, Maintenance Engineer, Shift Maintenance Technician, PLC Troubleshooting, Preventative Maintenance, Equipment Repair, Electrical Systems, Mechanical Systems, Fault Finding, Machine Maintenance, Manufacturing Equipment, Automation Systems, Night Shift, Career Progression, Pay Increase

Job Title: Mechanical Technician III Work Schedule: Full-time, 40 hours/week (Overtime and periodic off-hours support required) The Mechanical Technician III will support the Engineering Project Team with capacity additions, new line installations, and mechanical debugging activities. This role will lead and participate in engineering and manufacturing projects focused on equipment installation, troubleshooting, and preparing manufacturing lines for operational readiness. The ideal candidate will bring strong mechanical discipline, problem-solving abilities, and hands-on technical expertise to ensure equipment performance, reliability, and safety. Key Responsibilities Mechanical & Project Support Lead and support manufacturing engineering projects for equipment installations, capacity additions, and mechanical line debugging. Identify and resolve technical mechanical issues using root-cause analysis and collaboration with subject matter experts. Design and implement mechanical improvements to enhance equipment capability and system performance. Support project planning, execution, and documentation for multi-line equipment installations. Work closely with vendors/suppliers to resolve issues and maintain scope, cost, and timeline requirements. Troubleshooting & Maintenance Perform advanced troubleshooting, diagnostics, and repairs on mechanical systems (pumps, motors, conveyors, hydraulics, pneumatics, etc.). Align, test, and calibrate mechanical systems after installation or repair. Interpret blueprints, schematics, and technical manuals to support repair and installation activities. Recommend improvements to equipment reliability, efficiency, and safety. Documentation & Operational Support Create and update engineering and operations documentation. Manage spare part identification, storage, and inventory across a two-plant footprint. Support and conduct training for operations teams on equipment changes or new installations. Maintain safe working practices and proactively identify potential hazards. Required Qualifications Education Associate Degree in Mechanical Engineering, Industrial Technology, or related technical field. Experience Minimum 3+ years of experience in new equipment installations within a manufacturing environment. Experience in fast-paced environments with shifting priorities. Startup or commissioning experience is highly desirable. Technical Skills Strong mechanical fundamentals in hydraulics, pneumatics, bearings, gear systems, and conveyor systems. Proficiency in troubleshooting mechanical equipment using diagnostic tools. Ability to read and interpret technical drawings, schematics, and blueprints. Skilled in the use of hand tools, power tools, and precision measuring equipment. Basic understanding of CMMS systems. Proficient in Microsoft Office Suite.

Build Your Career with Ashley Furniture Blaze your own path on our Manufacturing Maintenance team, where we're committed to investing in new cutting-edge technology and automation. Work with our talented and innovative team in our state-of-the-art facilities and learn what it takes to be the #1 Manufacturer of Furniture. Electro Mechanical Technician What Will You Do? You maintain and repair electromechanical drives, sensors and automated machinery while working with maintenance and engineers to install and evaluate electromechanical systems to support the manufacturing process. What You Need? Knowledge of with troubleshooting and repairing CNC manufacturing equipment, PLCs, motor controls and mechanical assemblies Knowledge of programming PLC's, HMI's as well as PC based systems a plus Knowledge of working with three phase power as well as a variety of different control voltages is a must. Ability to use all shop tools Ability to use all testing and measuring equipment and tools required to maintain or repair electromechanical control systems Who Are We? At Ashley, we're more than a business…we're family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We're problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for status quo. It's the reason we're always searching for better ways to delivering an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. Ready to grow? You've come to the right place. Ashley Furniture has a “Growth Mindset”, and once you join our team, you'll learn from the best in the business. Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused

* 1) Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational and environmental testing of mechanical, structural, or electrical equipment, and translates test data for engineering personnel to formulate engineering design and evaluation decisions: Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus. * 2) Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel. * 3) Performs preventive and corrective maintenance of test apparatus and peripheral equipment. * 4) Installs or directs technical personnel in installation of unit in test chamber or other test facility. * 5) Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions, such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration. * 6) Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. * 7) May plan test program. * 8) May use computerized equipment and software to perform testing functions and produce graphs. * 9) May be designated according to equipment tested as Rocket-Control Technician; or according to nature of test as Environmental-Research Test Technician; Vibration Technician.

Huntsman is seeking an I&E Technician supporting the ADMAT Division located in Rock Hill Site. This position will report to the Maintenance Supervisor. Job Scope This position is responsible for troubleshooting, repairing, and maintaining instrument and electrical systems across all units of the plant. The technician plays a key role in ensuring equipment reliability and plant uptime, supporting both preventive and corrective maintenance efforts, while also assisting in capital project execution. In summary, as the I&E Technician, you will: Maintain, repair, and troubleshoot instrumentation and electrical systems. Perform PMs (Preventive Maintenance) as per plant procedures. Support capital projects through loop checks and commissioning activities. Configure instruments using HART protocol and perform installations of new equipment. Identify and fulfill E&I needs, including design and installation. Support inventory management and maintain accurate records. Collaborate with other maintenance and operations teams. Participate in EHS (Environmental, Health, and Safety) initiatives. Follow RCRA (Resource Conservation and Recovery Act) guidelines when applicable. Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. The candidate must have an unrestricted right to work for Huntsman in the United States. Minimum Qualifications Education required: Technical or Vocational Training in Instrumentation. Experience: Minimum of 7 years of relevant experience in instrumentation and electrical systems, preferably in a chemical or similar manufacturing environment. Skills and Knowledge (Behavioral and Technical) Strong troubleshooting and analytical skills for diagnosing equipment failures. Experience in chemical plant maintenance or industrial manufacturing. Ability to work independently and in a team. Effective verbal and written communication skills. Familiarity with a Maintenance Work Order Process. Willingness to work overtime, respond to call-ins, and adapt to changing priorities. Knowledge in calibration, testing, and installation of instrumentation/electrical equipment. Ability to size and install rigid conduit. Preferred Qualifications (a plus to have) Craft certification in Electrical or Instrumentation fields. Experience with: Rosemount instrumentation. Experience with PLC systems. Working Environment This position involves physical activity and may require lifting, climbing, and working in confined spaces. The role may involve handling materials regulated under RCRA (training will be provided). A strong focus on safety, good housekeeping, and adherence to EHS protocols is essential. Huntsman is proud to be an equal opportunity workplace and is an affirmative action employer. We provide equal employment opportunities (EEO) to all qualified applicants for employment, without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identification, sexual orientation and/or expression or any other characteristic protected by law in every location in which we have facilities national or local. Please refer to ****************************************************** for Company's Data Privacy and Protection information. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service. Huntsman is aware of a scam involving fraudulent job offers. Huntsman does not make job offers until after a candidate has submitted a job application and has participated in a face-to-face interview. Please be advised that emails from Huntsman always end in “@huntsman.com” , and that any job offer that requires payment or requires you to deposit a check is likely a scam. If you have questions about any open positions at Huntsman, please visit our Careers website at ******************************************** Additional Locations:

Shifts Available: 2nd shift, 2pm - 10pm, and including weekends and On-Call SAERTEX multi Com is looking for a skilled Electronics Technician with a minimum of 5 years experience with at least two years being in a manufacturing environment. This person will have both electrical and mechanical skills. You must be a self-starter and strive to complete tasks right the first time and not just find the quickest Band-Aid solution. You must be dependable, responsible and able to work with minimal supervision. You must also be a team player and committed to consistently performing high-quality work. You will be responsible for servicing and troubleshooting the production and support equipment within our plants; including installations, equipment movement, project support, preventative and predictive maintenance and other duties as assigned. Works from manual, prints and schematics to rebuild, repair and install equipment Performs welding and fabrication as needed Proper and continued use of PPE and follow all safety policies while performing assigned duties. (i.e. Lockout/Tagout, Confined Space, etc.) Maintain a positive working relationship with all levels of the organization Maintain high standards of housekeeping throughout the plant PLC Troubleshooting & PLC Knowledge Low voltage troubleshooting High voltage troubleshooting Install, remove and troubleshoot drives, servos, power cables, communication cables and encoders Run Test/ Fault diagnostic on drives, servos, power and communication cables Solder wires and plugs Familiar with Indramat hardware/software, Troubleshoot Familiar with B&R hardware/software, Troubleshoot Familiar with Siemens hardware/software, Troubleshoot Complete assigned work orders with our CMMS work order system Strong problem solving skills Diagnose and repair problems with malfunctioning circuitry networks, non-affective electronic pieces and missing or inoperative parts Troubleshoot and repair "Dry" AC units Troubleshoot and repair hydraulic and pneumatic systems Assist technicians in troubleshooting issues with machines 3-Phase Troubleshooting and repair Test power supplies, drives and servos to evaluate performance Perform PMs on equipment Procure parts, maintain inventory and documentation for US & European parts and supplies Repair or replace sensors and light barriers Work with production staff to increase production and minimize downtime Basic knowledge of inputs/outputs, stop circuits and safety relays Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: One year certificate from college or technical school; and three to five years related experience and/or training; or equivalent combination of education and experience. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Math Ability: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: To perform this job successfully, an individual should have knowledge of Manufacturing software (SAP preferred), Contact Management Systems, Order Processing Systems. Certificates and Licenses: Drivers License Required Supervisory Responsibilities: This job has no supervisory responsibilities. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts and work in high, precarious places. The employee is occasionally exposed to wet or humid conditions (non-weather);outdoor weather conditions and extreme heat (non-weather). The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds.Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus.While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl.

Important Application Submission Information In order to ensure your application is successfully received before the job posting expires, please submit your application by 11:59 PM on Tuesday, December 16, 2025More than a career - a chance to make a difference in people's lives. Build an exciting, rewarding career with us - help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits. This position is approved to hire for Engineering Technologist I / II based on the successful candidate's qualifications and suitability to the role. The position will report in-person out of Fort Mill, SC, with occasional support expected throughout the area if needed (for coverage needs of team, when peers are out on vacation or leave), and across the Pee Dee zone for infrequent storm response support. Responsibilities Develop then provide technical expertise and guidance in the identification, analysis, and resolution of problems in area of expertise, Ensures accomplishment of business goals and objectives through effective planning, organizing, estimating, scheduling, and monitoring of work activities, Prepare thorough and accurate technical reports, correspondence, documentation, calculations, and sketches, with assistance, Conducts engineering and related studies such as voltage drop & flicker, three phase transformer load diversification, structural analysis (Pole Foreman), etc. Strives to continually improve job-related, technical, and professional knowledge, skills, and performance, Develops positive working relationships to effectively coordinate work activities, Demonstrates effective verbal and written communication skills, Maintains accurate records and files, Supports the company's goals and represents the company positively and professionally. Basic Qualifications Engineering Technologist I Associates degree in Engineering or Engineering Technology In lieu of degree, HS/GED and 2+ years of relevant industry experience. Basic Qualifications Engineering Technologist II Bachelor's degree in Engineering or Engineering Technology OR 2+ years relevant industry experience and an Associate's degree in Engineering or Engineering Technology In lieu of degree, HS/GED and 4+ years relevant industry experience. Additional Preferred Qualifications Good written and oral communication skills & able to effectively apply basic principles of project management. Experience in the utility industry; specifically, Power Distribution and related customer service on phone calls, emails and notably in-person Experience managing Work Orders in MAXIMO (Date management, pre-requisites, construction tasks, status updating, etc.) GIS based drawing tools, specifically in the internally developed tool Design Lite, with estimation of material and labor Compatible Units (CU). OUD or MicroStation (Bentley suite), and/or AutoCAD skills are a plus, along with familiarity with ESRI products such as ARGUS. Knowledge of NESC based overhead and underground power distribution specifications. Superior organizational skills to manage a substantial backlog of Work Orders from residential, commercial, and industrial customers both externally and with internal customers such as land services for a geographic territory assigned to the individual. Candidate will need to work well with other team members in the Area Engineering group as well as proactively communicate with Work Management, Scheduling and Construction groups. Emotional intelligence and discipline to collaborate with customers seeking immediate resolutions to specific needs and potential process gap remediation. Working Conditions Hybrid Mobility Classification - (Minimum 3 days in office) is available after initial training and transition phase, with emphasis on in-person availability as needed for business and customers need during the week and across business hours starting at least at 8am Mix of field work, computer-aided design, and project management in office & hybrid settings Ability to stake jobs, drive flags in the ground, check poles with probing tools/hammer and handling of PPE and basic tools. Potentially assist peers out of other office locations within this same area, like Fort Mill, York, or Chester, when covering them or for workload balancing Drive (shared) pool allocated company vehicles to site visits and storm roles, following all company safety protocol and requirements, typically from their reporting Operations Center Travel Requirements 5-15%Relocation Assistance Provided (as applicable) NoRepresented/Union PositionNoVisa Sponsored PositionNoPlease note that in order to be considered for this position, you must possess all of the basic/required qualifications. Privacy Do Not Sell My Personal Information (CA) Terms of Use Accessibility

Job Description Electronics Technician Description: As an Electrical Engineering Technician at UPT, you will play a key role in driving the development, and testing of electrical equipment for multiple projects, involving a multidisciplinary team of research and development engineers and support staff. You will work under the direction of our Sr. Engineering Staff and Program Managers. Occasional travel between UPT sites (Charlotte/Locust). Working in an office environment with hands-on electrical engineering work in lab or warehouse. Duties/Responsibilities: Ability to complete a technical project independently Review customer specifications and requirements and develop designs to best support them Evaluate supplier components and subsystems to meet requirements Assemble and test prototypes to retire key development risks Communicate clearly (written and oral) with all stakeholders Provide technical assistance to other engineers and support personnel Support, communicate, reinforce, and defend the mission, values, and culture of the organization Skills/Qualifications: Experience working with program management and engineering to meet product specifications and engineering standards. Excellent verbal and written communication skills to all stakeholders Experience prototyping and testing both AC/DC, power, digital circuits, and controls electronics Experience in integration and testing of electrical systems and sensors Experience in Microsoft Office Software Ability to multitask and handle changing work assignments, schedules, and priorities Must be able to pass a background check and drug screen Must be a US Citizen Education/Experience Requirements: Associates with 4+ years of relevant hands-on experience assembly and test of analog/digital circuits, control systems and power conversion Understanding of SBIR and military R&D process preferred Experience with MIL-STD design and testing preferred

JOB SUMMARY: Under general supervision, the Electronics Technician will oversee the functionality of a multitude of operating systems, i. e. fire, security, within school buildings.

Riley Power group, LLC is a full-service maintenance and capital construction services company headquartered in Rock Hill, SC. We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial sector. We are currently hiring a skilled I&C Technician for multiple positions in the US. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! Essential Functions of this position may include but are not limited to: Responsible for the maintenance, inspection, troubleshooting, repair, calibration and testing of power plant instrumentation and control equipment. Must be able to read and understand drawings/prints, manuals, and procedures. Troubleshoot instrumentation and control system (such as instrument loops, electronic control systems and equipment) to determine operational problems, follow any applicable administrative procedures, perform tests of loops, evaluate data, and recommend actions to take. Calibrate equipment's/devices/components to meet technical and manufacturing specifications. Repair I&C systems and equipment according to appropriate control procedures to return equipment to service. Document all system and equipment repairs. Perform preventative maintenance on I&C systems and equipment. Perform independent and component verification, which includes review of work requests, flow diagrams and procedures. Please note that the essential job functions listed above are not intended to be all-encompassing. Employee may be asked to perform tasks which are not listed in this description but may also be considered essential for employment. Qualification, education, and experience requirements: 5 years working experience in instrumentation and control and electrical maintenance. High school diploma or equivalent or Associate degree or higher in electronics, engineering technology, instrumentation, or related field. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to: Practical skills, other medical, psychological (if required by site), background and substance abuse screening(s). Physical RequirementsLifting objects weighing 50 pounds to waist height and transporting a distance of 10 feet. Citizenship/ Work Authorization Requirements Must be a citizen of the US, its possessions or territories, or lawful permanent resident as defined by USC 1101(a)(20), or protected individual as defined by USC 1324b(a)(3) RPG participates in the eVerify program. Equal OpportunityRPG is an equal opportunity employer. We do not discriminate in employment on account of race, color, religion, national origin, citizenship status, criminal history, ancestry, age, sex, gender, sexual orientation, marital status, physical or mental disability, military status, or discharge from military service. RPG provides its services to many clients in their various business sectors who may have physical, mental, pre-employment screening and/ or citizenship requirements. These requirements are driven by contracts and/ or security requirements that RPG is required to adhere to, and which may vary between clients and their respective high-security industries. Misrepresentation or falsification of qualifications or background information is grounds for termination, denial of employment and/ or disqualification from future employment consideration.

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Engineering Technician - Day Shift Organization Overview At Lilly, we unite caring with discovery to make life better for people around the world. Headquartered in Indianapolis, Indiana, we are a global leader in healthcare, committed to discovering life-changing medicines, advancing disease management, and supporting our communities through philanthropy and volunteerism. We put people first and strive to make a meaningful impact every day. Position Summary The Engineering Technician at our Concord, NC facility plays a key role in supporting Parenteral Operations, our customer, by ensuring the efficient setup and operation of Pre-Filled Syringe and Isolator Equipment. This position requires hands-on engineering maintenance expertise to assist with equipment setup, operational support, troubleshooting, repairs, and ongoing maintenance. The ideal candidate will demonstrate a strong understanding of customer needs, collaborate effectively with internal teams, and provide responsive, courteous support. Success in this role requires technical proficiency, problem-solving skills, and a commitment to delivering excellent customer service in a dynamic manufacturing environment. Key Responsibilities Promote a safety-first, quality-always culture in all tasks and interactions Improve equipment uptime, line efficiency, and overall equipment effectiveness (OEE) Perform condition monitoring, troubleshooting, and provide operational support Diagnose and repair precision filling equipment with strong mechanical aptitude Collaborate with engineering and production teams to resolve equipment issues promptly Assist with equipment setup and changeovers to support production needs Adhere to all GMP and quality standards Must have the ability to quickly and accurately diagnose the root cause of a problem and properly implement corrective actions to minimize downtime Accurately document maintenance activities and corrective actions Support cross-functional tasks and assist outside primary responsibilities as needed Work independently and manage priorities under pressure Basic Requirements High school diploma or GED Minimum of 5 years' experience in production maintenance Preferred Qualifications Strong mechanical aptitude and hands-on technical skills Proficient with basic hand tools Detail-oriented with a commitment to quality and precision Familiarity with safety protocols and proper PPE usage Physically able to stand for extended periods Effective team player with strong interpersonal skills Associate's degree or technical certification in a related field is a plus Knowledge of FDA and GMP regulations Experience operating high-speed, automated production equipment, preferably Syringe/Vial Filling systems utilizing Isolator technology Ability to quickly learn and apply new procedures Experience working in a classified manufacturing environment Familiarity with Computerized Maintenance Management Systems (CMMS) platforms Strong verbal and written communication skills Customer-oriented mindset with a proactive approach Analytical thinker with strong problem-solving abilities Additional Information Flexibility to work overtime or adjust schedule based on production demands Following a Monday-Friday, 8-hour training period, the role transitions to a 12-hour 2-2-3-day shift schedule Willing and able to respond to off-hour emergencies as needed Open to travel for training and professional development opportunities Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $21.27 - $41.25 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Engineering Technologist Asheville, NC We are in search of an Engineering Technologist to join our diverse and fast-paced organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in performing field inspections, engineering design work and calculations. As a part of this work, you'll be coordinating with permit agencies, right-of-way specialists, system owners, field leaders, forestry leaders, and 3rd party owners for joint-owned poles. Additionally, you will provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met, as well as conducting root cause analysis of outages and mitigation using engineering principles and design. You'll engage with technical design and Client standards, ensuring quality and timeliness of design deliverables to QAQC. Responsibilities will include: Review work provided by Client and assess requirements of scopes. Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met. Conduct root cause analysis of outages and mitigation using engineering principles and design. Travel to sites as needed, perform inspections and return to the office to perform engineering design work; about 80% of your time will be spent traveling locally and regionally, collecting field data that will assist in the development of electrical design work packages Background Requirements: High School diploma or equivalent is required; Associates Degree or higher in engineering technology or related is preferred Willingness to perform both field and office work Written and verbal communication skills Ability to work in outdoor environments, as some field work could be required Proficiency in MS Office (Word, Excel, Outlook, etc.) Power/Utilities experience is preferred Previous experience with field data collection is preferred This role requires a valid US driver's license as local and regional travel is required Professional Attributes that will help you succeed in this role: Collaborative attitude and inclusivity of individuals of diverse backgrounds and geographic locations. Ability to work with limited supervision Positive attitude Professional dress and demeanor

Gray Media, or Gray, is a multimedia company headquartered in Atlanta, Georgia, formally known as Gray Television, Inc. The company is the nation's largest owner of top-rated local television stations and digital assets serving 113 television markets that collectively reach approximately 36 percent of US television households. The portfolio includes 77 markets with the top-rated television station and 100 markets with the first and/or second-highest-rated television station, as well as the largest Telemundo Affiliate group with 43 markets totaling nearly 1.5 million Hispanic TV Households. The company also owns Gray Digital Media, a full-service digital agency offering national and local clients digital marketing strategies with the most advanced digital products and services. Gray's additional media properties include video production companies Raycom Sports, Tupelo Media Group, and PowerNation Studios, and studio production facilities Assembly Atlanta and Third Rail Studios. About WBTV: WBTV was the first television station to sign on in the Carolinas and is considered the “most trustworthy source of news and information” in the area, according to research. WBTV First Alert Weather is the certified most accurate forecast for the market as measured by WeatheRate. Being “On Your Side” for viewers, clients, and the community is the guiding principle of WBTV and helps drive its award-winning newscasts and quality local journalism. Visit ************ to learn more. Job Summary/Description: WBTV is seeking a Broadcast Engineer/IT Technician. A Broadcast Engineer supports all live and recorded programming and post-production. Duties include troubleshooting, maintaining, and installing studio and editing equipment. The Engineer interacts daily with all departments and will be responsible for following all WBTV and FCC standards and guidelines. The successful candidate will be able to combine solid leadership with a hands-on approach and broadcast engineering and IT management skills for a dominant full-power television station. The ability to oversee and interact with IT-based workflow in an automated environment and digital transmitter experience is important. Good communication skills in a fast-paced news environment are essential. Duties/Responsibilities include, but are not limited to: • Maintain all engineering aspects of the technical facility, including studio support, Master Control, field production support, and transmission of live/recorded events and programs. • Have expert knowledge regarding equipment, technology, and systems, and be able to step in and assist in emergencies. • Performs regular maintenance tasks, including repairs, equipment replacement, supplies, etc. • Documents and executes necessary corrective actions as situations arise. • Ensures all transmission equipment is operating correctly before and during live event telecasts - corrects and documents technical problems and reports them to the managers. • Ensures compliance with applicable regulations and communication with other departments by maintaining discrepancy logs and equipment incident reports and regularly auditing these documents to identify areas where performance or process needs to improve. • Assist the Chief Engineer and Director of Technology in overseeing and implementing Engineering projects. • Must be able to insert and remove control room rack equipment weighing 25-50 pounds with the help of another employee. • Maintains building needs. • Commanding knowledge of Windows operating systems and network management. • Knowledge of networking, routing, and IP addressing. • Manage the maintenance and repair of all company facilities associated with our station. This includes HVAC, generators, security systems, satellite dishes, electrical, hardware, etc. • Manage the maintenance and repair of the towers, antennas, and transmission lines/connections. • Must be available to work during breaking news situations, severe weather, new system integrations and updates, and provide on-call services 24/7. • Ability to learn and adapt quickly to all work situations. Qualifications/Requirements: • Must have at least 2 years of working experience in Broadcast Engineering-IT. • A Bachelor's Degree in IT and Electronics or related is preferred but is not required. • On-the-job and/or formal training in repairing Broadcast Facilities. • Display and maintain professional appearance, based on station standards and professional demeanor. • Strong leadership skills and ability to operate and adapt in high-pressure situations. • Professional, communicative, highly self-motivated, detail-oriented, and focused individual traits. • Knowledge of Crispin Automation, Ross Overdrive, and Harmonic servers is a plus. If you feel you're qualified and want to work with a great group of people, go to *************************************** , you may type in the job title, station call letters, or click on "apply now", upload your resume, cover letter, and references (Current employees who are interested in this position can apply through the Gray-TV UltiPro self-service portal ) WBTV-TV/Gray Media is a drug-free company Additional Info: Gray Media provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Gray Media complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Gray Media expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Gray's employees to perform their job duties may result in discipline up to and including discharge.

Job DescriptionAbout the role: The Electrical Engineering Technician/Electrical Engineer will have the opportunity to perform a broad range of work tasks with guidance and support from other engineering and management staff. Hydro-electric equipment and duties within the scope of this position includes but is not limited to generators, governors, excitation systems, generator circuit breakers, switchgear, switchboards, motor control centers, motors, control boxes, relay panels, lighting systems, power distribution systems and components, instrumentation (level, flow, pressure, temperature, vibration), and diesel engine-generator sets. A representative cross section of anticipated responsibilities is presented below. Why Eagle Creek? A comprehensive benefits plan: Medical, Dental, Vision, HSA, FSA, Commuter benefits, Voluntary Life, 401(k) Match. Eleven paid holidays per year, plus a competitive PTO schedule and time off to volunteer or give back to your community. Access to a company-funded Employee Assistance Program. Employee discounts through ADP LifeMart. Tuition Reimbursement as well as access to trainings & mentors for Career Progression and Personal Development. What you'll do: Prepare specifications and other engineering documents to procure, install, and commission a wide variety of hydro-electric equipment and systems. Plan and direct hydro-electric equipment refurbishment projects from disassembly to return to service. Troubleshoot equipment failures and perform root cause analysis to eliminate repeat failures. Represent the company at shop inspections and factory acceptance tests related to hydro-electric systems to ensure equipment in shop meets specifications and Industry codes. Direct contractors and hydro project staff at facilities to accomplish equipment repair and upgrades; ensuring electrical documents are updated to reflect field changes. Provide operations & maintenance with industry best practices that drive equipment operational reliability and minimize unplanned downtime. Manage project implementation and complete projects on time and on-budget. Collaborate with other engineering disciplines (mechanical, controls) to support project integration. Utilize equipment predictive data analysis to enhance equipment performance and recommend outage schedules for performing preventative maintenance. Develop electrical schematics and drawings to guide installation and maintenance of hydro-electric equipment and systems. What skills and experience you'll need: Bachelor's degree in engineering or a minimum of four years' work experience in a related field. Travel as required for project supervision and execution (~30%). Strong understanding of power systems, including generation, transmission, and distribution. The ability to work effectively in a team environment and collaborate with other disciplines. Experience with industrial electrical systems and maintenance practices. The ability to perform operational tasks which may include: The ability to climb ladders and to work at heights on or near water. The dexterity to manipulate various size components from valves to small electrical switches to computer keyboards. The ability to "handle" rapidly changing situations under stress. Eagle Creek Renewable Energy, LLC is an equal opportunity employer Powered by JazzHR DavV6dqd7t

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Engineering Technician needs Vocational and/or diploma in an engineering field • 1-3 years in engineering information systems and/or engineering services Engineering Technician requires: Management and operation of rapid prototyping processes (Stratasys Objet and FDM) • Working knowledge of various software and business operating systems such as: o ECR/ECO workflows (WorkflowGen, WindChill, Enovia a plus) o Product Data Management (Autodesk Vault, PTC WindChill, Enovia a plus) o CAD Administration (Autodesk Inventor, PTC Creo, Solidworks a plus) o ERP software (BAAN, SAP) a plus Engineering Technician duties: Reviewing drawings in the release cycle for proper notation, revision and format (non-technical content) Approving the release of drawings and entering them into the PDM/repository system • Entering BOM and release information into the ERP system (data entry) • Additional Information $26/hr 6 months