Electronics technician jobs in Corpus Christi, TX - 40 jobs
All
Electronics Technician
Field Service Technician
Instrument Technician
IE Technician
Electrical Technician
Equipment Technician
Instrument Technician Apprentice
Repair Technician
System Technician
Test Technician
Controls Technician
IC Technician
Mechanical Technician
Electrical Systems Technician I - Public Works - J03160 - 15000
Nueces County, Tx 3.9
Electronics technician job in Corpus Christi, TX
Base Pay: $18.10 Hourly . SUMMARY: Under supervision, assists with installation, diagnosis and repairing of electrical systems in county buildings, including jail facilities. Performs other maintenance duties as needed, including work on various control systems, heating and air conditioning systems and plumbing.
The employee is required to be on duty before, during and after natural disasters and emergencies, as directed by the supervisor.
ORGANIZATIONAL RELATIONSHIPS: Employee reports to the Director of Public Works or designee.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
Performs a wide variety of construction tasks, preventative maintenance and repair work on equipment, building components, electrical systems and facilities.
Assists with repairing access-control systems and video surveillance systems.
Assists with repairing fire alarms, paging and fuel dispensing systems.
Assists with repairs in high voltage switch gear and electrical distribution systems.
Installs electrical conduit, wires, panels, fixtures and switches.
Act as an inspector for electrical contractors.
Provide for periodic re-lamping of light fixtures in various county facilities.
Assists with installing and repairing electrical systems, apparatus, circuits, and electrical components of machinery and equipment.
Inspects and tests electrical equipment, lighting and power circuits.
Assists with repairing or replace wiring, circuit breakers, fuses, switches, sockets and other elements.
Reads blueprints, sketches and schematic drawings of electrical circuits.
Assists with mounting motors, transformers, and lighting fixtures into position and completes circuits according to diagram specifications.
Assists in the maintenance and renovation of electrical service.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) with two years of experience in building maintenance, which includes preventative maintenance and repairs on electrical equipment, buildings and facilities; or equivalent combination of education and experience. Military or technical school training in telecommunications repair is highly desirable.
LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
MATHEMATICAL SKILLS: Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
CERTIFICATES, LICENSES, REGISTRATIONS: Must have a valid Texas Motor Vehicle Operator's License (Class C). Any employee who drives a vehicle on official business must have a driving record which meets standards set by the County and the County's insurance carrier. Must pass a criminal background check.
OTHER SKILLS AND ABILITIES: Ability to read, write and speak English fluently. Ability to communicate with a variety of county employees as well as outside vendors. Detail oriented with strong organizational skills. Ability to define the components and/or steps necessary to complete a project and follow thru to completion of the project. Must have ability to establish and maintain effective working relationships with other county employees and officials.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel objects, tools, or controls. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. Employee stands while doing electrical installation and performing checks and testing of equipment. Employee crawls while inspecting electrical equipment in mechanical rooms. Employee climbs while testing circuits in mechanical rooms and working on ceilings and the tops of buildings. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Employee lifts parts such as generators, piping armatures and light poles. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to risk of electrical shock. The employee frequently works in high, precarious places and in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions and fumes or airborne particles. Employee works on fan belts, emergency generators, electrical control doors, etc. Employee installs and relocates outlets, performs circuit tests and troubleshoots a variety of electrical problems. The noise level in the work environment ranges from moderate to loud dependent upon the work assignments the employee is carrying out.
.
Job Post End Date -
$18.1 hourly Auto-Apply 60d+ ago
Looking for a job?
Let Zippia find it for you.
IC&E Technician III
Calpine 4.9
Electronics technician job in Corpus Christi, TX
Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner.
The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity.
Job Summary (includes but is not limited to the following; other duties may be assigned)
Maintains and repairs electrical equipment and instrumentation. Monitors, maintains, and repairs plant Distributed Control System (DCS). Monitors, maintain, and repairs gas turbine, steam turbine control systems, generators, transformers, and switchgear. Maintain, calibrate and repair plant electrical, instrumentation, and control systems. Perform routine trouble shooting activities. Use Computerized Maintenance Management System (CMMS) to effectively accomplish required maintenance in and efficient and organized manner. Optimize plant preventative maintenance program to meet OEM recommendations, regulatory requirements, and corporate maintenance philosophy. Responsible for maintaining logs, manuals, records, blueprints and operating procedures in a neat and professional manner. Provide written reports on control system conditions when required. Incorporates safe behavior into all activities and consistently complies with all established safety and health policies and procedures, helps to identify and eliminate or actively manage risks in all work activities.
Job Responsibilities
* Senior-level; recognized technical expertise in own and possibly related functions.
* Performs a variety of complex technical service/support duties requiring specialized knowledge.
* Regularly makes decisions on non-routine or escalated technical issues.
* Independently prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area.
* Checks own work and possibly the work of others; work results are of the highest quality standards and advanced technical competency.
* Errors may be serious, usually not subject to direct verification or check.
* Duties and tasks reflect substantial variety and complexity.
* Resolves the most complex technical issues, conferring with Team Leader occasionally; may serve as resource to others in resolution of complex issues.
* Works under limited supervision.
* Prioritizes own weekly schedule and may guide others in the completion of tasks within clearly defined schedules as set by management.
* Regularly provides on-the-job skills training to others in complex technical areas.
Job Requirements
* High School Diploma, degree from technical/vocational school or equivalent.
* Senior-level; minimum of 5 years of experience in instrument/electrical and control system applications.
* Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity and mathematics.
* Experience with DCS programming and configuration
* Advanced certifications/licensures. Valid state driver's license.
Additional Calpine Information:
* Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities.
* Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis.
Please view Equal Employment Opportunity Posters provided by OFCCP here
$103k-129k yearly est. 60d+ ago
Field Service Technician
Dex Imaging 3.7
Electronics technician job in Corpus Christi, TX
Ready to Fix, Tinker, and Save the Day - One Copier at a Time?
At DEX Imaging, we're not just in the business of printers and copiers-we're in the business of
making office life smoother, faster, and a whole lot less frustrating
. We are currently on the lookout for a Copier Service Technician in Corpus Christi, Texas who's part problem-solver, part tech whisperer, and all-around customer service superhero.If you're the kind of person who loves digging into the nuts and bolts of machines and can troubleshoot like a pro, then we want to meet you! Join our high-energy team, bring your skills (or we'll help you build them), and enjoy a workplace where no two days are ever the same.
Who we are:
DEX Imaging is a leading provider of document handling equipment and services with multiple offices and locations throughout the United States. We are the nation's largest independent provider of office technology. We are the industry leader in delivering excellent customer service every time and we do this by hiring and training great people.
Working as a Service Technician you can expect:
Full time schedule, working 40 hours a week
Full benefits, competitive pay, and uncapped commissions
Opportunity for training, development, and promotion
Excellent corporate discounts
Employee recognition and rewards program
Regular business hours. We value work/life balance.
Competitive PTO and Paid Holidays
If you are career minded and ready to be an integral part of a team in a dynamic, innovative and upbeat atmosphere, then you belong right here on our award winning team.
What's the opportunity:
Service Technicians must be mechanically inclined, extremely reliable and trustworthy. They should be comfortable working independently and have excellent communication skills. In this role, Service Technicians perform diagnostics, service repairs and maintenance work on customer and dealer-owned copier equipment. Our technicians provide top notch customer care to all of customers and clients.
What will you do:
Provide service and customer support during field visits or dispatches.
Manage all on site installation, repair, maintenance and test tasks.
Diagnose errors or technical problems and determine proper solutions.
Produce timely and detailed service reports.
Follow all company's filed procedures and protocols.
Cooperate with technical team and share information across the organization.
Comprehend customer requirements and make appropriate recommendations/briefings.
Update job knowledge by participating in educational opportunities; reading professional publications.
Build positive relationships with customers.
Works as part of a cohesive team within the shop to meet customer needs.
Follows all safety practices of the organization when completing work assignments.
Helps to maintain company vehicles, inventory and tools in proper working condition.
Maintain knowledge on existing products and pursues additional technical and product knowledge by actively participating in the training programs of the dealership.
Maintains communication with the customer and answers questions relative to the work being performed. Makes recommendations for additional work that needs to be completed.
What you bring to the table
Must possess a valid driver's license
Ability to manage service calls that require more time than anticipated without becoming frustrated or rushing through a job.
Superb customer service skills and an ability to diagnose and solve problems from non-technical descriptions provided by their customers.
What can DEX provide to you:
Opportunity, career development and personal growth
In house training
Company culture where we celebrate our team members
A place where you can stop going to work and you can start building your career
The preceding has been designed to indicate the general nature of work performed; the level of knowledge and skills typically required; and usual working conditions of this job. It is not designed to contain, or be interpreted as, a comprehensive listing of all requirements or responsibilities that may be requires by employees in the job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations made to enable individual with disabilities to perform essential functions.
This job description does not imply or cannot be considered as a part of an employment contract. DEX Imaging as an Equal Opportunity Employer.
$49k-76k yearly est. Auto-Apply 60d+ ago
Rope Access Mechanical Tech
Rockwood 4.3
Electronics technician job in Corpus Christi, TX
Acuren Inspection is looking for a Rope Access Technicians to support our operations in South, TX. Preference will be given to candidates with an NDT or mechanical trades background.
The Rope Access technicians are responsible for managing the safety of crews engaged in rope access activities, to organize work functions specific to rope access jobs, and to supervise crews engaged in performing a broad range of technical and/or industrial services at heights. The role ensures individual and organizational compliance with IRATA standards and regulations to ensure the safe and effective performance of work.
Responsibilities
Perform specific job functions as they relate to work orders
Be conversant with relevant work techniques
Be able to demonstrate all the skills and knowledge required of a level 1 Rope Access Technician
Assist other technicians as required
Ensure operational safety of all equipment
Requirements
IRATA or SPRAT Level I Certification required including proficiency in theoretical knowledge, equipment and rigging, maneuvers, climbing and rescue/hauling
Valid drivers' license preferred
Required certification levels for specific projects
Must have industrial refinery experience
Must have mechanical industrial experience
Preferred individual with the NCCER certification (Trained Individual)
Benefits
Competitive Salary
Medical, dental, vision, and supplemental insurance
401K Plan
Paid Holidays
Paid Time Off
Company Overview
Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a
Higher Level of Reliability
, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services.
Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments.
Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees.
#LI-YC1
$42k-62k yearly est. Auto-Apply 15d ago
I & E Tech Journeyman - Maintenance
Brown & Root Industrial Services 4.9
Electronics technician job in Bishop, TX
* 1) Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational and environmental testing of mechanical, structural, or electrical equipment, and translates test data for engineering personnel to formulate engineering design and evaluation decisions: Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus.
* 2) Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel.
* 3) Performs preventive and corrective maintenance of test apparatus and peripheral equipment.
* 4) Installs or directs technical personnel in installation of unit in test chamber or other test facility.
* 5) Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions, such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration.
* 6) Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results.
* 7) May plan test program.
* 8) May use computerized equipment and software to perform testing functions and produce graphs.
* 9) May be designated according to equipment tested as Rocket-Control Technician; or according to nature of test as Environmental-Research Test Technician; Vibration Technician.
$52k-77k yearly est. 9h ago
Electrical Technician
Vp 3.9
Electronics technician job in Corpus Christi, TX
Electrical Technician - Industrial Maintenance
Schedule: Monday-Friday with overtime as needed
We are seeking a skilled and safety-focused Electrical Technician to support the maintenance, optimization, and troubleshooting of electrical systems. This role involves close collaboration with maintenance supervisors, electrical leads, and shift electricians to ensure reliable operations and strict adherence to safety protocols. The ideal candidate will bring hands-on experience in electrical repair, system calibration, and equipment support, with a strong commitment to teamwork and operational excellence.
Responsibilities
Install, maintain, and optimize electrical systems and equipment
Assist in troubleshooting and repairing existing electrical infrastructure
Provide essential diagnostic and repair support
Collaborate with engineers on HMIs, PLCs, and drive systems
Verify and calibrate monitoring equipment to ensure accuracy and performance
Follow all safety procedures
Participate in continuous improvement efforts and report system inefficiencies
Qualifications
Demonstrated commitment to safety and reliable attendance
Prior experience in electrical maintenance within an industrial, manufacturing environment, or military experience
Basic computer proficiency for documentation and system interface
Willingness to work overtime and adapt to changing priorities
Positive, team-oriented attitude with strong communication skills
Preferred Skills
Familiarity with hydraulic systems
Basic understanding of PLCs and industrial automation
Ability to interpret technical manuals and schematics
Troubleshooting and problem-solving abilities
$46k-69k yearly est. Auto-Apply 60d+ ago
INSTRUMENTATION TECHNICIAN
Flint Hills Resources 4.9
Electronics technician job in Corpus Christi, TX
Your Job Flint Hills Resources is hiring for an Instrumentation Technician to join the maintenance group at our refinery in Corpus Christi, Texas! Our Team Our Instrumentation shop maintains over around 50,000 controllers, solenoids, switches, transmitters, valves and wireless devices in our refinery in Corpus Christi. We are a team of hardworking tradespeople that thrive on keeping our equipment running and calibrated. Our team consists of top talent in the oil and gas industry as well as up and coming technicians. Whatever your skill level, we are committed to your future with FHR!
What You Will Do
Daily troubleshooting & repair of instrumentation in live process units.
Instrument turnaround maintenance activities (ID potential scope items, enter T/A work orders, lead work crews for scope as assigned, and perform instrument scope work)
Work a 4/10 day-shift schedule (M-Th) and participate in an afterhours/on-call rotation
Who You Are (Basic Qualifications)
Work experience in the Instrumentation craft in any industry OR a graduate of an Instrumentation Degree Program
Possess a valid US Driver's License
What Will Put You Ahead
3 years' experience in the Instrumentation trade
Mechanical experience in an industrial environment
#LI-JW10
At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.
Hiring Philosophy
All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here.
Who We Are
As a Koch company, Flint Hills Resources is an industry-leading refining company making the oil and transportation products that keep the world moving. We make a large supply of fuel for gas stations and airports in addition to transporting crude oil, natural gas liquids and refined products through 4,000+ miles of pipeline -delivering energy to farmers, manufacturers and families. Our team champions innovation and excellence to help power modern life.
At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.
Our Benefits
Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter.
Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.
Equal Opportunities
Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please visit the following website for additional information: http://www.kochcareers.com/doc/Everify.pdf
$47k-69k yearly est. 6d ago
Electrical Technician
Veterans Prime, Inc.
Electronics technician job in Corpus Christi, TX
Electrical Technician - Industrial Maintenance
Schedule: Monday-Friday with overtime as needed
We are seeking a skilled and safety-focused Electrical Technician to support the maintenance, optimization, and troubleshooting of electrical systems. This role involves close collaboration with maintenance supervisors, electrical leads, and shift electricians to ensure reliable operations and strict adherence to safety protocols. The ideal candidate will bring hands-on experience in electrical repair, system calibration, and equipment support, with a strong commitment to teamwork and operational excellence.
Responsibilities
Install, maintain, and optimize electrical systems and equipment
Assist in troubleshooting and repairing existing electrical infrastructure
Provide essential diagnostic and repair support
Collaborate with engineers on HMIs, PLCs, and drive systems
Verify and calibrate monitoring equipment to ensure accuracy and performance
Follow all safety procedures
Participate in continuous improvement efforts and report system inefficiencies
Qualifications
Demonstrated commitment to safety and reliable attendance
Prior experience in electrical maintenance within an industrial, manufacturing environment, or military experience
Basic computer proficiency for documentation and system interface
Willingness to work overtime and adapt to changing priorities
Positive, team-oriented attitude with strong communication skills
Preferred Skills
Familiarity with hydraulic systems
Basic understanding of PLCs and industrial automation
Ability to interpret technical manuals and schematics
Troubleshooting and problem-solving abilities
$44k-73k yearly est. Auto-Apply 60d+ ago
ATM Field Service Technician
Nusource Financial 3.9
Electronics technician job in Corpus Christi, TX
ATM FIELD SERVICE TECHNICIAN Do you enjoy working with your hands and diagnosing problems? Are you a tech savvy person with mechanical aptitude who feels their skills are transferrable? Service Technicians create value for our customers by delivering solutions that build long term relationships. Acting as a first line response to our customers, you will triage customer issues, find the right solution, and even handle some problems before they start.
If this sounds like you, we would like to get to know you better!
NuSource implements cutting edge Branch Transformation, Security and Service solutions for the financial institution vertical supported by a world class service team. Our mission is to consistently deliver value-added consultative solutions and quality service experiences based on our core values of Integrity, Professionalism, and Teamwork. Our Net Promoter Score is consistently in the mid-80's, which far exceeds anyone in our industry. NuSource is employee-owned and everyone who works for us has the opportunity to become an owner.
Primary Function/Summary
Perform installation services to customer specifications within timeline and budget parameters. Respond to and resolve requests for service of security, conventional, ATM, and ITM equipment. Complete preventative maintenance work as prescribed.
Responsibilities
Provide a world class customer experience!
Perform low voltage job duties such as wiring, mounting and setup of electronic security installations (Video Surveillance, Access Control Systems, Security Alarm Systems, Phone Entry Systems, etc.)
Service access control, video surveillance, security alarm, pneumatic systems, drive through audio systems, locks, and keys.
Install and service customer ATM banking equipment.
Diagnose hardware and software problems and complete needed repair and resolution
Complete preventative maintenance check-ups as defined by maintenance contract
Complete site surveys as necessary to validate conditions in support of project bids and proposals
Document/complete all fields and call notes via electronic applications for each service call
Communicate activity and status to manager, dispatch, customer and others as needed
Maintain company van and tools in good working order (company expense)
Interact with customer in a professional and proficient manner
Skills and Qualifications
Required:
Troubleshooting knowledge for low voltage & basic electronic systems
Analog and IP video knowledge
Security Alarm wiring, device installation & programming experience
Proficiencies with Windows 10 & Microsoft Office Products
Ability to pass background check, drug test and DMV record check
HS Diploma
Driver's license
Preferred:
Minimum 2 years' experience in security, low voltage and/or locksmithing industry
Low voltage cabling expertise
Access control experience
Door Hardware Experience (instillation and service of strikes, mag-locks, power door operators, electrified locking hardware etc.)
Ability & understanding with IP data networks
2 Year Associates Degree from a Technical College Specifically with training in Electronics or Low Voltage System Design
Ability to perform all duties while maintaining our core values of Professionalism, Integrity, and Teamwork
Job Type: Full-time
Required license or certification: Driver's License
Education: Associated Degree or Industry Certifications
Benefits available include:
401k Plan with company match
Paid Time Off (PTO) and paid company holidays
Medical, dental and vision
Life and disability
Supplemental insurance (accident, hospital and illness)
Annual clothing allowance
The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience.
NuSource Financial participates in the federal government's E-Verify program. With all new hires, we provide the Social Security Administration and, when applicable, the US Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization.
$52k-83k yearly est. 29d ago
Fire System Technician
United Safety 4.0
Electronics technician job in Corpus Christi, TX
Key Responsibilities: Fire Extinguisher Services
Perform visual inspections, annual maintenance, internal examinations, and hydrostatic testing.
Identify and document fire extinguisher components, agent type, manufacturer details, and maintenance history.
Install and mount extinguishers in compliance with NFPA standards.
Conduct repairs and recharging of extinguishers.
Ensure the safe use and maintenance of tools and personal protective equipment (PPE).
Maintain accurate documentation of all service activities.
Fire Alarm Systems
Install initiating and notification devices, cabling, and related infrastructure.
Perform periodic testing and maintenance of alarm systems and devices.
Replace, repair, or clean impaired/deficient components.
Support system commissioning and submittal documentation.
Develop work plans and coordinate tasks with team members and clients.
Safety and Compliance
Comply with OSHA, NFPA, and other applicable regulations.
Recognize hazards and apply mitigation strategies in the field.
Understand and implement MSDS usage, proper lifting techniques, and basic first aid.
Operate electronic safety equipment and respiratory protection when required.
Minimum Qualifications
High school diploma or GED required.
At least 1 year of experience in fire protection services or a related industry (e.g., petrochemical or oil refinery).
Valid state driver's license and proof of vehicle insurance.
Clean driving record and ability to be insured under company policy.
Ability and willingness to travel for short- and long-term out-of-town assignments.
Must be able to obtain a TWIC card and pass safety training courses (e.g., Basic Plus, OSHA 10-Hour).
Must be physically fit to wear respiratory protection and pass a fit test.
Licensing & Certification Requirements
Required:
Fire Extinguisher License - Type B (FEL-B)
Fire Alarm License (FAL)
Preferred:
State Fire Licenses as required OR ability to pass NICET Level II within 12 months of hire.
Knowledge & Skills
Strong understanding of fire equipment components and systems.
Familiarity with regulatory standards (OSHA, NFPA, CFR).
Ability to read and interpret technical drawings and specifications.
Skilled in basic troubleshooting, installation, and maintenance of fire safety equipment.
Strong communication and team collaboration skills.
Ability to manage documentation and coordinate work activities efficiently.
$33k-55k yearly est. 60d+ ago
Field Service Technician
Vault Pressure Control
Electronics technician job in Corpus Christi, TX
Full-time Description
Vault Pressure Control, LLC, leveraging its 100-year product legacy, is a preferred solutions provider of quality pressure control equipment and services for the oil and gas industry. Performs multiple tasks associated with field installation, service, maintenance, troubleshoot and repair of surface wellhead systems
Essential Functions
Field Service, assembly, and repair of new, reman and customer property
Job will be primarily based in the workshop in Corpus Christi, TX but will also include customer location visits
Works independently to install new products and conduct repairs of Vault Pressure Control equipment ensuring no rig lost time for our customers while controlling expenses and maintaining assets
Handles customer complaints in a professional manner
Maintains effective communication with Company Representative on issues including job procedures and spare parts requirements
Records critical dimensions to ensure assembly will work and obtains and reviews product assembly/running procedures
Responsibly for shipping correct equipment and tooling to location for service jobs
Prepares and submits Field Service Orders and other region required reports after each job is complete. Completes a Tally Book or other forms to communicate procedures, spare parts, critical dimensions and customer questions and complaints
Work in a safe manner in compliance with VPC EHS and quality processes and procedures
Complete shift reports and logs
Must be able to climb up and climb down a ladder from work locations
Must be able to work in confined spaces
Must be able to lift up to 40 pounds
Ability to work 12-14 hour shifts, day and night on a rotating schedule and weekends as needed
Other duties as assigned by management
Requirements
Experience / Knowledge
Must have a minimum of 2 years field service tech experience
Demonstrated good working knowledge of mechanical processes
High school diploma or GED
Technical, vocational, or military training or related experience is a plus
Surface Wellhead installation and repair experience a plus but not required
At least one year mechanical, electronic and hydraulic related experience
Current valid driver's license
Must be authorized to work in the United States
Demonstrated good customer service skills - communication skills, positive interpersonal and problem-solving skills
Demonstrated good organizational skills
Work Environment
Regular exposure to moving mechanical components, airborne fumes, and particles
Exposure to heat, cold, wet and snow conditions
Moderate noise levels
$47k-75k yearly est. 60d+ ago
BAS/ Controls Tech
Texas Chiller Systems
Electronics technician job in Corpus Christi, TX
Building Automation Systems Technicians work as part of a team to install, start-up, repair, and maintain computer-based systems that control and monitor a building's mechanical and electrical equipment, including heating, ventilation, and air conditioning (HVAC) and energy management systems.
Duties/Responsibilities:
· You have expertise in the BAS (Building Automation Systems) field and possess the ability to load system-level controller software. Additionally, you can carry out basic commissioning and system diagnostics, from system-level controllers to end devices such as sensors, actuators, etc. You are also able to complete all the necessary commissioning documentation and calibrate systems that require basic electronic test equipment.
· You prioritize consistent communication with management, contractors, and customers regarding job progress, including arrival, completion, and issues, to build lasting relationships.
· You will have no issue completing administrative tasks, including but not limited to time sheets, expense reports, and on-site documentation.
· You understand the importance of following all safety standards and attending required safety training. You have a high degree of regard for employee and subcontractor safety.
Job Requirements:
· Vocational School four-year program or an associate's degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience or 2 years' experience in servicing electronic and/or mechanical systems in the HVAC industry.
· Generally required knowledge includes HVAC controls systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniques.
· Effective interpersonal skills to properly represent Texas Chiller Systems to customers and other outside contacts in an ethical and professional manner.
· Ability to explain technical information to technical and non-technical people. Leadership skills to support the activities of Mechanics working on non-complex, non-critical Building Automation equipment on a job site.
· PC experience required and the ability to program HVAC related software.
· Niagara N4 Certification
· Experience with Tridium Niagara framework
· Experience with Distech and Honeywell control lines
Job Type: Full-time, Non-Exempt
Texas Chiller Systems is an equal opportunity employer that is committed to providing all employees with a work environment free of discrimination and harassment. We celebrate diversity and welcome applicants from every background and life experience.
Disclaimer: The above statements are intended to describe the general nature and level of work being performed by persons assigned to this job. These statements are not to be translated as an exhaustive list of all responsibilities, duties, and skills required of personnel in this position. All team members may be required to perform duties outside of their normal responsibilities from time to time as needed.
$37k-58k yearly est. Auto-Apply 11d ago
Leak Repair Technician
Leverage Mechanical Services
Electronics technician job in Corpus Christi, TX
Job Summary: The Leak Repair Technician is responsible for identifying and repairing leaking components within industrial settings. This role involves assessing leaks, reporting findings to supervisory personnel and engineering, and executing repair operations using various techniques and tasks.
Duties and responsibilities:
* Assess leaking components and report findings to supervisory personnel and engineering.
* Perform leak repair operations utilizing techniques such as drill and tap, field repairs, clamp and enclosure installation, measuring components, stand-by operations, inspections, and evaluation of performance on repair activities.
* Execute a variety of tasks, often adapting to changing assignments on short notice.
* Prioritize and complete work assignments by specific deadlines.
* Follow precise directions and procedures of the supervisor on the project.
Requirements
Essential qualifications:
* High school diploma or equivalent.
* Ability to perform a variety of tasks and adapt to changing assignments.
* Experience with leak repair techniques and equipment.
* Ability to prioritize and complete work assignments by specific deadlines.
* Knowledge of plant maintenance and repair work preferred.
* Ability to follow precise directions and procedures of the supervisor on the project.
* Must possess a valid driver's license.
* Must have a TWIC card.
* Must be able to pass a background and drug screen.
Preferred qualifications:
* Additional certifications or training in industrial maintenance or repair.
* Five (5) or more years of experience in an industrial operations or maintenance role.
* Familiarity with safety protocols in industrial settings.
* Strong problem-solving skills.
* Excellent communication skills.
Working conditions:
The Leak Repair Technician may work in various industrial settings, including refineries, chemical plants, or manufacturing facilities. This role may require working in confined spaces, at heights, and in environments with exposure to noise, chemicals, and extreme temperatures. The position may involve overtime, weekend, and on-call work.
Physical requirements:
* Ability to lift and carry heavy equipment and materials.
* Ability to stand, stoop, kneel, climb, and perform tasks in confined spaces.
* Physical dexterity to operate tools and equipment safely.
* Ability to wear personal protective equipment (PPE) as required by the job site.
$33k-54k yearly est. 50d ago
Medical Equipment Technician
Adapthealth LLC
Electronics technician job in Corpus Christi, TX
Requirements
Minimum Job Qualifications:
High School Diploma or equivalency
Entry level sales, customer service background essential
One (1) year of Military, delivery driver with sales component or health care technician experience would be
considered related experience and preferred.
Senior level requires two (2) years of work-related experience and one (1) year of exact job experience.
Valid and unrestricted driver's license in the state of residence
Physical Demands and Work Environment:
Must be able to regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Must be able to stretch, bend, stoop and crouch and perform moderate to heavy physical labor while moving equipment and supplies.
Subject to long periods of sitting and driving.
Work environment may be stressful at times, as overall work activities and work levels fluctuate.
May be exposed to unsanitary conditions in some home settings.
May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen.
May be exposed to high crime areas within the service community.
Must be able to drive independently and travel as needed.
May be exposed to angry or irate customers.
Must be able to access the patient's residence without assistance.
Mental alertness to perform the essential functions of position.
Ability to effectively communicate both verbally and written with customers with the ability to demonstrate empathy, compassion, courtesy, and respect for privacy.
AdaptHealth is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individual's race, color, religion, creed, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other status protected by applicable law. This policy applies to all terms, conditions, and privileges of employment, including recruitment, hiring, placement, compensation, promotion, discipline, and termination.
Salary Description $15-$18/hr
$15-18 hourly 13d ago
Instrument Technician VI
Zachry Group 4.5
Electronics technician job in Gregory, TX
***THIS IS MAINTENANCE***NO PER DIEM***
Instrument Technician will be responsible for installing, repairing, maintaining, and calibrating electronic equipment and gauges that control, regulate, and/or monitor a mechanical system.
Must have 5 years' experience in instrumentation
Must be able to read blue prints.
Must be able to work on low and high pressure tubing/piping systems.
Must have tools (see tool list below).
Must be able to work with precision instruments and tools.
Must have Current TWIC Card
Must have Valid Driver License
Must be willing to follow all company and project work policies and procedures
JOB REQUIREMENTS
Job Description:
Inspects, tests, adjusts, and repairs electric, electronic, mechanical, and pneumatic instruments and systems used to indicate, record, and control chemical manufacturing processes.
Inspects meters, indicators, and gauges to help detect causes of abnormal fluctuations in process measurements.
Tests accuracy of flowmeters, pressure gauges, temperature indicators, controllers, and other recording, indicating, or controlling instruments to locate defective components in system, using test equipment.
Traces out and tests electrical and electronic solid state components to locate defective parts in analog and digital devices using test equipment, schematics, and maintenance manuals.
Removes defective instruments from system, decontaminates, disassembles, and cleans instruments, and replaces defective parts, using hand tools.
Instrument Installation and Loop checking; Reassembles instruments and replaces instruments in system, using hand tools.
SIS Instrument Calibrations
Analyzing instrument Calibrations (such as but not limited to PH probes, LEL detectors, CO monitors, etc.) including maintenance/Repair
Instrument tubing Fitting/bending (Process Tubing, air, etc.)
Lubricates instruments and replaces defective wiring and tubing
Calibrates readings on instruments according to standards and adjusts phasing and aligns stages to ensure accuracy of recording and indicating function.
Records calibrations made, parts and components used, and inventory of parts on hand.
Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments, circuits, and systems.
Willing to learn about unfamiliar instrumentation both old and new.
Physical Requirements:
Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting.
Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools.
May be required to lift, carry and move up to 50lbs.
Must be able to work at heights and be able to climb ladders and stairways as well as work on elevated platforms
Will as needed work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection.
Must be capable of working outside in the elements including heat, cold, rain, snow and wind
Will be required to wear personal protective equipment (PPE) including but not limiting to hard hat, safety glasses, gloves, fall arrest harness, face shield, ear plugs, and goggles.
ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.
CERTIFICATIONS AND/OR LICENSES REQUIRED *
NCCER - Industrial Instrument Technician
NCCER Plus
OTHER POSITION OR SITE REQUIREMENTS
VALID DL
CURRENT TWIC CARD IN HAND
NCCER CERTIFICATION
CERTIFICATIONS AND/OR LICENSES REQUIRED *
NCCER - Industrial Instrument Technician
OTHER POSITION OR SITE REQUIREMENTS
VALID DL
CURRENT TWIC CARD IN HAND
NCCER CERTIFICATION
ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.
$49k-64k yearly est. Auto-Apply 8d ago
Instrument Technician VI
Zachry Holdings, Inc. 4.7
Electronics technician job in Gregory, TX
* THIS IS MAINTENANCE*NO PER DIEM* Instrument Technician will be responsible for installing, repairing, maintaining, and calibrating electronic equipment and gauges that control, regulate, and/or monitor a mechanical system. * Must have 5 years' experience in instrumentation
* Must be able to read blue prints.
* Must be able to work on low and high pressure tubing/piping systems.
* Must have tools (see tool list below).
* Must be able to work with precision instruments and tools.
* Must have Current TWIC Card
* Must have Valid Driver License
* Must be willing to follow all company and project work policies and procedures
JOB REQUIREMENTS
Job Description:
* Inspects, tests, adjusts, and repairs electric, electronic, mechanical, and pneumatic instruments and systems used to indicate, record, and control chemical manufacturing processes.
* Inspects meters, indicators, and gauges to help detect causes of abnormal fluctuations in process measurements.
* Tests accuracy of flowmeters, pressure gauges, temperature indicators, controllers, and other recording, indicating, or controlling instruments to locate defective components in system, using test equipment.
* Traces out and tests electrical and electronic solid state components to locate defective parts in analog and digital devices using test equipment, schematics, and maintenance manuals.
* Removes defective instruments from system, decontaminates, disassembles, and cleans instruments, and replaces defective parts, using hand tools.
* Instrument Installation and Loop checking; Reassembles instruments and replaces instruments in system, using hand tools.
* SIS Instrument Calibrations
* Analyzing instrument Calibrations (such as but not limited to PH probes, LEL detectors, CO monitors, etc.) including maintenance/Repair
* Instrument tubing Fitting/bending (Process Tubing, air, etc.)
* Lubricates instruments and replaces defective wiring and tubing
* Calibrates readings on instruments according to standards and adjusts phasing and aligns stages to ensure accuracy of recording and indicating function.
* Records calibrations made, parts and components used, and inventory of parts on hand.
* Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments, circuits, and systems.
* Willing to learn about unfamiliar instrumentation both old and new.
Physical Requirements:
* Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting.
* Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools.
* May be required to lift, carry and move up to 50lbs.
* Must be able to work at heights and be able to climb ladders and stairways as well as work on elevated platforms
* Will as needed work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection.
* Must be capable of working outside in the elements including heat, cold, rain, snow and wind
* Will be required to wear personal protective equipment (PPE) including but not limiting to hard hat, safety glasses, gloves, fall arrest harness, face shield, ear plugs, and goggles.
ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.
CERTIFICATIONS AND/OR LICENSES REQUIRED *
* NCCER - Industrial Instrument Technician
* NCCER Plus
OTHER POSITION OR SITE REQUIREMENTS
VALID DL
CURRENT TWIC CARD IN HAND
NCCER CERTIFICATION
CERTIFICATIONS AND/OR LICENSES REQUIRED *
NCCER - Industrial Instrument Technician
OTHER POSITION OR SITE REQUIREMENTS
VALID DL
CURRENT TWIC CARD IN HAND
NCCER CERTIFICATION
ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.
$49k-65k yearly est. Auto-Apply 7d ago
Torque & Test | Rig Up Technician
Force Pressure Control LLC
Electronics technician job in Orange Grove, TX
Job DescriptionDescription:
OFS Field Operations | Completions Roustabout
Force Pressure Control is seeking professional, safety-oriented roustabout personnel who have experience rigging up and rigging down wellhead barrier and surface pressure control equipment related to frac, drill out, and well testing scopes of work.
Local candidates preferred (Haynesville). Out-of-area candidates will also be considered.
The Roustabout position is a full time, non-exempt position. Hourly pay rate commensurate with experience. Total compensation package includes paid time off / paid holiday schedule, health / medical / ancillary benefits, and 401(k) retirement plan sponsorship.
Applicants have rights under Federal Employment Laws.
Requirements:
$37k-58k yearly est. 17d ago
RV Technician Apprentice
Blue Compass RV
Electronics technician job in Rockport, TX
Start your journey with Blue Compass RV as we are looking for a Technician Apprentice to join our team and deliver extraordinary customer experiences. WHO WE ARE Blue Compass RV is the fastest growing RV Company with more than 100+ RV dealerships across the country! We staff each dealership with the best people in the business. We are known for the great care we take with customers and associates alike. You are not just an employee with our company, you are family.
Imagine working at a professionally and financially satisfying job where you can make a positive impact on our organization and customers every day. As a Technician, you will perform repairs and maintenance work in accordance with factory and dealership specifications and time standards for an excellent customer experience. Your work efficiency allows you the opportunity to control your pay!
COMPENSATION: $16-$18/hourly
WHAT WE HAVE TO OFFER
* Our state-of-the-art training programs offer our technicians continued education, all paid certification, and opportunity for future career growth.
* Paid Mentorship program
* Medical, dental, vision, disability, FSAs, and life insurance!
* Paid Time Off and paid holidays
* Employee assistance program
* Pet insurance
* Referral Program
* 5-day work weeks
* Legal coverage
* 401K!
WHAT WE ARE LOOKING FOR
As an Apprentice Technician you are not required to work on engines. Think of this as maintenance and repair of a home on wheels! If you have experience in the following, you should apply with us:
* Appliance Repair
* HVAC/ Roof mounted A/C Systems
* Electrician/Electrical Systems
* Plumbing/Water Heating Systems
* Propane Systems
* Interior Carpentry/Countertops
* Slide Out Systems
* Generators
* Satellite Systems
WHAT WE ARE LOOKING FOR:
* Provide and document complete diagnostic test and repair or replacement services to customers units
* Perform electrical, plumbing, carpentry and appliance maintenance
* Track all parts and materials used in repairs or replacements
* Repairing the trailer approved by customer, warranty or manufacturer
* Communicating with all departments when more information needed or when problems arise
* Ensure that the final work product meets quality standards
WHAT YOU CAN BRING TO THE TABLE:
* Some Technician Experience
* Support service team technicians
* Running errands for parts or supplies
* Assist technicians with service jobs
* Assist in other areas of service department
* Show potential for growth and ability to learn RV repair techniques
* Commitment: Ensure our customers have a world-class service experience at every step along their ownership journey, especially in RV unit repairs.
* Excellence: Provide an unparalleled level of technical knowledge and expertise to help repair and maintain RV units to the highest factory and dealership standards.
* Communication: Clearly and effectively communicate technical information regarding customer RV units to Service Advisors.
* Accountability: Comply with all manufacturer standards of quality and timeliness for repairs and maintenance work and ensure that all estimates and work orders are accurate.
* Safety: Understand and comply with all federal, state and local regulations that affect shop operations, such as handling and disposal of hazardous waste, OSHA, and use of safety and health personal protective equipment.
APPLY WITH US!
If you are ready for a rewarding career with competitive compensation and benefits, and opportunities to excel and advance, consider joining the Blue Compass RV organization. Our interview process typically includes a phone interview, in-person interviews, background check, reference check, driving record review and a drug screen. Be a part of the best customer experience team in the RV industry... apply with us today!
Blue Compass RV is an equal opportunity employer and maintains a drug- and alcohol-free workplace. Some positions may require applicants to possess a valid driver's license and have a good driving record.
$16-18 hourly 60d+ ago
RV Technician Apprentice
Blue Compass RV Rockport
Electronics technician job in Rockport, TX
Start your journey with Blue Compass RV as we are looking for a Technician Apprentice to join our team and deliver extraordinary customer experiences.
WHO WE ARE Blue Compass RV is the fastest growing RV Company with more than 100+ RV dealerships across the country! We staff each dealership with the best people in the business. We are known for the great care we take with customers and associates alike. You are not just an employee with our company, you are family.
Imagine working at a professionally and financially satisfying job where you can make a positive impact on our organization and customers every day. As a Technician, you will perform repairs and maintenance work in accordance with factory and dealership specifications and time standards for an excellent customer experience. Your work efficiency allows you the opportunity to control your pay!
COMPENSATION: $16-$18/hourly
WHAT WE HAVE TO OFFER
Our state-of-the-art training programs offer our technicians continued education, all paid certification, and opportunity for future career growth.
Paid Mentorship program
Medical, dental, vision, disability, FSAs, and life insurance!
Paid Time Off and paid holidays
Employee assistance program
Pet insurance
Referral Program
5-day work weeks
Legal coverage
401K!
WHAT WE ARE LOOKING FOR
As an Apprentice Technician you are not required to work on engines. Think of this as maintenance and repair of a home on wheels! If you have experience in the following, you should apply with us:
Appliance Repair
HVAC/ Roof mounted A/C Systems
Electrician/Electrical Systems
Plumbing/Water Heating Systems
Propane Systems
Interior Carpentry/Countertops
Slide Out Systems
Generators
Satellite Systems
WHAT WE ARE LOOKING FOR:
Provide and document complete diagnostic test and repair or replacement services to customers units
Perform electrical, plumbing, carpentry and appliance maintenance
Track all parts and materials used in repairs or replacements
Repairing the trailer approved by customer, warranty or manufacturer
Communicating with all departments when more information needed or when problems arise
Ensure that the final work product meets quality standards
WHAT YOU CAN BRING TO THE TABLE:
Some Technician Experience
Support service team technicians
Running errands for parts or supplies
Assist technicians with service jobs
Assist in other areas of service department
Show potential for growth and ability to learn RV repair techniques
Commitment: Ensure our customers have a world-class service experience at every step along their ownership journey, especially in RV unit repairs.
Excellence: Provide an unparalleled level of technical knowledge and expertise to help repair and maintain RV units to the highest factory and dealership standards.
Communication: Clearly and effectively communicate technical information regarding customer RV units to Service Advisors.
Accountability: Comply with all manufacturer standards of quality and timeliness for repairs and maintenance work and ensure that all estimates and work orders are accurate.
Safety: Understand and comply with all federal, state and local regulations that affect shop operations, such as handling and disposal of hazardous waste, OSHA, and use of safety and health personal protective equipment.
APPLY WITH US!
If you are ready for a rewarding career with competitive compensation and benefits, and opportunities to excel and advance, consider joining the Blue Compass RV organization. Our interview process typically includes a phone interview, in-person interviews, background check, reference check, driving record review and a drug screen. Be a part of the best customer experience team in the RV industry... apply with us today!
Blue Compass RV is an equal opportunity employer and maintains a drug- and alcohol-free workplace. Some positions may require applicants to possess a valid driver's license and have a good driving record.
$16-18 hourly Auto-Apply 60d+ ago
I & E Tech Journeyman - Maintenance
Brown & Root 4.9
Electronics technician job in Bishop, TX
* 1) Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational and environmental testing of mechanical, structural, or electrical equipment, and translates test data for engineering personnel to formulate engineering design and evaluation decisions: Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus.
* 2) Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel.
* 3) Performs preventive and corrective maintenance of test apparatus and peripheral equipment.
* 4) Installs or directs technical personnel in installation of unit in test chamber or other test facility.
* 5) Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions, such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration.
* 6) Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results.
* 7) May plan test program.
* 8) May use computerized equipment and software to perform testing functions and produce graphs.
* 9) May be designated according to equipment tested as Rocket-Control Technician; or according to nature of test as Environmental-Research Test Technician; Vibration Technician.
QUALIFICATIONS May require a high school diploma or its equivalent and previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 65% Walking 15% Sitting 20% b. Lifting 30 lb. Carrying 30 lb. Pushing 70 ft-lb. Pulling 70 ft-lb. 2. Climbing F Balancing F 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%)
Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.
BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.
How much does an electronics technician earn in Corpus Christi, TX?
The average electronics technician in Corpus Christi, TX earns between $31,000 and $69,000 annually. This compares to the national average electronics technician range of $32,000 to $66,000.
Average electronics technician salary in Corpus Christi, TX