Electronics technician jobs in Daytona Beach, FL - 102 jobs

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Mission Systems is looking for you to join our team as a Microelectronic Technician 3 based out of Apopka, FL. The Technician will perform a variety of technical, chemical, and photolithography duties, including the development, processing, and control of semiconductor materials and devices. What You'll Get to Do: Run fabrication equipment for processing semiconductor materials and devices under the guidance of process documentation, which includes the setup and operation of a variety of standard and special solid-state processing equipment. This includes performing various chemical, physical, photographic, and packaging processes such as deposition, evaporation, and etching of materials, metals plating, wafer dicing /thinning, and making/requesting adjustments based upon the knowledge of process and procedures, and monitoring equipment when applicable. Examine processes such as resist/develop processing, photo exposure, metallization, and etching to determine the quality of the process to locate defects. Determine and discuss with the engineer possible improvements in the process or equipment to remedy defects. Interpret SPC (Statistical Process Control) charts to react to out-of-control conditions to maintain process control. Prepare reports or parts of reports following established patterns. Covering work assignments such as preparing masks, operating photographic equipment, and developing photographic films. Placing lots on hold, based on engineering guidance, disposition lots, and document in MES. Performing tasks such as running split lots for engineering, ensuring special processing is consistent and on time. Performing gage R&R (repeatability & Reproducibility) studies for metrology equipment. Basic Qualifications Microelectronic Technician 3: High school graduate or recognized equivalent. Associate's degree or two years (minimum 60 semester hours) of college-level study with a major in a physical science or equivalent; or 4 years of relevant experience. 4 years of prior manufacturing experience or 1.5 years of previous technician experience processing wafers in the semiconductor bump line Ability to lift, hold, move, and manipulate the wafers in a FOUP (Front Opening Unified Pod) to 25 pounds and with a wand as applicable. The ability to obtain and maintain a Department of Defense (DoD) Secret clearance. U.S. citizenship required Preferred Qualifications Microelectronic Technician 3: Experience running semiconductor process equipment and metrology equipment. Experience in data collection and interpretation. Wafer handling experience, placing lots on hold, and disposition of held material. Security Clearance. What We Can Offer You: Northrop Grumman provides a comprehensive benefits package and a work environment that encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the flexibility and control to choose the benefits that make the most sense for you and your family. Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off, and Additional Benefits, including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more! MANUMS Primary Level Salary Range: $57,500.00 - $95,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Are you ready for what's next? Come explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes “Next Never Rests™,” and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation. Innovation is the heart of Brunswick. See how your contributions will help transform vision into reality: Position Overview: The Electrical Assembler - Warranty Technician is responsible for diagnosing, repairing, and assembling electrical components and systems to ensure products meet quality and performance standards. This role focuses on handling warranty-related repairs and troubleshooting issues reported by customers, ensuring timely and accurate resolution. The technician works closely with engineering and customer service teams to identify root causes, implement corrective actions, and maintain detailed documentation of repairs. Additionally, this position ensures compliance with safety protocols and company standards while delivering exceptional service and reliability to support customer satisfaction. At Brunswick, we have passion for our work and a distinct ability to deliver. Essential Functions: Perform incoming inspections and inventory of customer returned boats and photo document received and shipped conditions Engage and communicate findings with appropriate Value Stream Leaders, Engineering, and schedule appropriate vessel reviews when applicable Communicate projects status with Customers, Captains, Service Managers, and/or General Managers When applicable assist in the training of customers and dealer technicians in the proper steps of systems operation and proper preventative maintenance schedules Support Customer Service Representatives and dealer technicians with technical information, and troubleshooting guidance Document supporting materials, travel, labor associated with internal, and external assignments Knowledge, skills and hands on ability in a wide variety of assembly related installations to include current and non-current product, customer purchased aftermarket components, mechanical systems, electrical installation and troubleshooting of AC/ DC, NMEA, CAN, digital network systems, interior materials fit and finish Testing of customer boats, ensuring all vessel systems are operational to manufactures specifications Experience in installation, rigging, programming, calibration of outboard engines Must have the ability to read blue prints Must interface well with retail customers, dealers, vendors, employees, other departments throughout Boston Whaler, and Brunswick organization Ability to work independently at off-site locations and adjust accordingly to solve problems that may arise Self starter, high energy individual who can work effectively without supervision Must be committed to quality standards acceptable by Boston Whaler and customer base Ensure work area is maintained clean, orderly and safe Know and enforce company policies and procedures Must be willing to work overtime as required to assure timely completion of critical projects Must be willing to travel on short notice where applicable to support timely resolutions of customer issues during peak periods Diversity of thought and experiences is fundamental when imagining the unimaginable. Certain skillsets/experiences are necessary; however, others can be developed along the way. Required Qualifications: Minimum of 5 years' boat building, troubleshooting, and repair experience required Demonstrate problem solving and decision-making abilities Experience troubleshooting and repairing Boston Whaler assemblies Experience with PC based software (word, excel, data acquisition, OBMS) Boating and mechanical background desired Job will require to be on site, in Edgewater, Florida when not traveling. Preferred Qualifications: Must have a High School Diploma or equivalent Knowledge of manufacturing methods and procedures Additional technical training in Mechanical / Electrical fields preferred Fiberglass training will be provided Must have strong knowledge and background in Electrical US Coast Guard safe boating course or equivalent boating safety course Boat handling experience preferred Physical Requirements and Activities: Able to wear Personal Protective Equipment (PPE) as required which may include respirators, gloves, chemical resistance aprons, and chemical resistant suits. Be able to lift to 50 lbs. Anything over 50 lbs. requires a team lift effort. Ability to work in a non-climate-controlled environment. The work location may be 60°F to above 100°F ambient in areas of production. Use hands and arms in handling, installing, positioning, and to manipulate material. Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. Ability to work in a fast-paced environment. Observes, receives, and otherwise obtains information from all relevant sources. Be able to control mechanisms or use direct physical activity to operate machinery. Troubleshoots equipment or materials to identify the cause of errors/defects. Working Conditions: Shop floor working environment. Shop floor is non-climate controlled. Temperature fluctuates with outside environmental conditions, such as air temperature, radiant heat from sunlight, air movement, and humidity levels. Frequent exposure to high-temperatures, including a hot and humid environment, especially during summer months. Noise level is moderate with intervals of spikes Required to wear safety glasses, and utilize other safety equipment and personal protect equipment (PPE) while present on the production/shop floor. Frequent exposure to moving mechanical parts, resins, fiberglass dust & cloths, epoxy, composites, and other chemicals. Ability to walk or stand for extended periods of times. Ability to regularly bend, stoop, kneel, twist, crouch, reach, climb, and lift or move up to 50 pounds. Vision abilities required include close vision, peripheral vision, and depth perception. The anticipated pay range for this position is $49,900 - $69,300 salary non-exempt with the possibility of overtime. The actual base pay offered will vary depending on multiple factors including job-related knowledge/skills, relevant experience, business needs, and geographic location. At Brunswick, it is not typical for an individual to be hired at or near the top end of the salary range for their role. Compensation decisions are dependent upon the specifics of the candidate's qualifications and the business context. This position is eligible to participate in Brunswick's comprehensive and high-quality benefits offerings, including medical, dental, vision, paid vacation, 401k (up to 4% match), Health Savings Account (with company contribution), wellbeing program, product purchase discounts, and much more. Why Brunswick: Whatever tomorrow brings, we'll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer valuable benefits including a competitive 401(k) plan with company match, health benefits, paid time off, a robust Wellness Program, and much more. In addition, we're proud of being recognized for making a splash with numerous awards! About Brunswick Boat Group Brunswick Boat Group is home to a diverse portfolio of iconic marine brands, including Bayliner, Boston Whaler, Crestliner, Harris, Heyday, Lowe, Lund, Navan, Princecraft, Protector, Quicksilver, Rayglass, Sea Ray, Spartan, Thunder Jet, and Uttern. Each brand carries a legacy of innovation, craftsmanship, and performance that has shaped the boating industry worldwide. Across our fiberglass and aluminum manufacturing facilities, our team members are the driving force behind our success. We foster a culture rooted in safety, integrity, continuous improvement, and personal growth. Whether you're building unsinkable legends, pioneering wake sports, or crafting fishing and pontoon boats trusted for generations, you'll be part of a united team committed to delivering exceptional experiences on the water. Next is Now! We value growth and development, recognizing that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Brunswick is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other characteristic protected by federal, state, or local law. Diversity of experience and skills combined with passion is key to innovation and inspiration and we encourage individuals from all backgrounds to apply. If you require accommodation during the application or interview process, please contact ****************************** for support. For more information about EEO laws, - click here Brunswick and Workday Privacy Policies Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: ****************************** or ************. All job offers will come to you via the candidate portal you create when applying through a posted position through https:///************************** If you are ever unsure about what is being required of you during the application process or its source, please contact HR Shared Services at ************ or ******************************. #Brunswick Corporation - Boston Whaler

Important Application Submission Information In order to ensure your application is successfully received before the job posting expires, please submit your application by 11:59 PM on Monday, February 9, 2026More than a career - a chance to make a difference in people's lives. Build an exciting, rewarding career with us - help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits. Depending upon the desired qualifications of the successful applicant, the hiring manager may elect to fill this position at a higher level within the job hierarchy. Position Summary The Engineering Technologist II position is the second level of the non-Engineer degreed technical support role job classification. Engineering Technologist II applies technical expertise to solve more complex problems and management skills to provide oversight and direction of work in a specific area of expertise, with some supervision. Incumbents are expected to develop deeper technical skills and the ability to work with an increasing degree of independence. The Engineering Technologist III position is the third level of the non-Engineer degreed technical support role. An Engineering Technologist III provides technical expertise to solve more complex problems and leadership skills to provide oversight and direction of work in a specific area of expertise, with some supervision. Employees in the Engineering Technologist III position are expected to develop advanced skills and the ability to work with a high degree of independence. This position is part of the Protection and Control Engineering group located in the Duke Energy Engineering office in Lake Mary Florida. This work group is responsible for design of protection and control relaying applications for substations (new and existing). Design projects range from routine equipment modifications and installations to the complete design of new transmission facilities. Coordinates work to manage multiple projects simultaneously to ensure timely release of engineering designs. Utilizes a variety of tools and techniques in order to complete an engineering design, including current design specifications, pertinent code manuals, computer aided design/drafting software, and other reference sources. Final product is an engineering release package consisting of pertinent drawings and bills of material. The person in this position will work as part of a project team to develop detailed project scopes, layouts of control equipment enclosures, detailed elementary, schematic and wiring diagram drawings and plans required for construction of specific substation projects. The work performed by this unit requires an understanding of power systems, transformers, protective relaying and electrical engineering principles. The person will be involved in the development and review of designs for high voltage substations at voltages of 23kV, 115kV, 230kV and 500kV. Additionally, the person in this position is expected to develop some knowledge in protective relay settings calculations and analysis based on current and evolving standards (IEEE, NERC, etc.). The person in this position must be able to manage multiple projects in various stages of design so as to meet project schedule deadlines; provide design support to field personnel during project implementation; develop and maintain sufficient level of expertise in use of CAD software for efficient production of engineering work; and collaborate in a team environment to spread knowledge and to produce the best quality product possible. Responsibilities Applies technical expertise in the identification, analysis and resolution of problems in area of expertise. Ensures accomplishment of business goals and objectives through effective planning, organizing, estimating, scheduling and monitoring of work activities. Prepares thorough and accurate technical reports, correspondence, documentation, calculations and sketches with some guidance. Conducts engineering and related studies. Strives to continually improve job-related, technical and professional knowledge, skills and performance. Develops positive working relationships to effectively coordinate work activities. Demonstrates effective oral and written communication skills. Maintains accurate records and files. Supports the company's goals and represents the company positively and professionally. Basic/Required Qualifications Note: This posting is for one open position. Dependent on relative experience, the level to which a candidate is aligned is outlined below. Engineering Technologist II Bachelor of Science in Engineering or Engineering Technology with no experience, OR Associates degree in Engineering or Engineering Technology AND two (2) + years of experience, OR Four (4) + years of equivalent experience without a degree Engineering Technologist III Bachelor of Science in Engineering or Engineering Technology AND two (2) + years of relevant industry experience, OR Associate degree in Engineering or Engineering Technology AND four (4) + years of experience. OR Six (6) + years equivalent experience without a degree Additional Preferred Qualifications Bachelor's degree in engineering technology Good written and oral communication skills. Experience in the utility industry. Understanding of basic principles of project management. Working Conditions Hybrid Mobility Classification - Work will be performed from both remote and onsite locations after the onboarding period. However, hybrid employees should live within a reasonable daily commute to a Duke Energy facility Some visits to field sites and/or plants are required, using a variety of transportation modes and some overnight stays Must be capable of using a computer and remain seated at desk for long periods of time Special Requirements Demonstrated ability to work with a variety of individuals from various socio-economic, cultural and ethnic backgrounds. Travel Requirements 5-15%Relocation Assistance Provided (as applicable) NoRepresented/Union PositionNoVisa Sponsored PositionNoPlease note that in order to be considered for this position, you must possess all of the basic/required qualifications. Privacy Do Not Sell My Personal Information (CA) Terms of Use Accessibility

Benefits: Competitive salary Dental insurance Employee discounts Health insurance Vision insurance As an Audio Video Technician Apprentice, you will assist experienced technicians in the installation, maintenance, and troubleshooting of audio and video systems in residential or commercial settings. Your responsibilities will include: • Assisting in the installation and setup of audio and video equipment, including speakers, televisions, projectors, cameras, and smart home systems. • Supporting the testing and troubleshooting of audio and video systems to ensure optimal performance. • Learning to operate various AV equipment and familiarizing yourself with different brands and technologies. • Collaborating with the technical team to provide seamless integration of audio and video components in clients' homes. • Participating in routine maintenance and updates of home audio and video systems. • Helping maintain inventory and organize equipment storage areas and vehicles. • Attending training sessions and workshops to enhance technical skills and knowledge. • Following safety protocols and best practices when handling and installing equipment in residential environments. • Acquiring and maintaining the required tools as specified in The Company's required tool list. * Must be able to lift 50 lbs * Must be comfortable in attic spaces and on ladders * Knowledge of basic tools Compensation: $20.00 - $30.00 per hour Smart Home Integration offers a tremendous growth opportunity for a variety of skill sets including sales, technician, project management, operations and more. According to CEDIA, the global trade association for the home technology industry, the most recent 2021 Integrated Home Market Analysis reports the estimated value of the integrated home market at $20.1B. Categories experiencing the most growth include lighting, motorized shades, lighting control, and networking. Smart Home Integrators offer careers in sales, operations, marketing, project management, finance, merchandising, purchasing, technical trades, and customer service. If you're seeking to make an impact from the start of your career, spark impressive change, learn new or innovative skills, and most importantly, gain success in a field that rewards ambitious hard workers, a Smart Home Integration opportunity is for you! Benefits of working in Smart Home Integration Opportunity for Growth If you want a responsible and engaging position in a fun environment, why not choose the Smart Home Integration sector. With the proper training and career road map, you can write your own ticket! Gain In-Demand Skills As consumers focus on improving and connecting their lives at home, growth in the smart home sector is booming.

Perimeter Solutions Group Now Hiring! Access Control Technician Salary: $23 - $32/hr. DOE We are seeking skilled Access Control Technician(s) to join our team. The ideal candidate will be responsible for programming, installing, and maintaining electronic fences, gate operating systems, access control barriers, and related technologies. This role requires a detail-oriented individual with a strong technical background and excellent problem-solving skills. What You'll Do: Installation and Programming: Install, program, and configure electronic fences, gate operating systems, and access control barriers Maintenance and Troubleshooting: Perform regular maintenance and troubleshooting of access control systems to ensure optimal performance System Integration: Integrate access control systems with other security and building management systems Technical Support: Provide technical support and training to clients and end-users on the operation and maintenance of access control systems Documentation: Maintain accurate records of installations, maintenance, and repairs. Prepare detailed reports on system performance and issues Compliance: Ensure all installations and operations comply with relevant safety and security standards and regulations Customer Service: Respond to customer inquiries and service requests in a timely and professional manner What You'll Need: Education: High school diploma or equivalent; technical certification or associate degree in electronics, electrical engineering, or a related field preferred Experience: Minimum of 2 years of experience in access control systems, electronic security systems, or a related field Technical Skills: Proficiency in programming and configuring access control systems, electronic fences, and gate operating systems. Knowledge of networking and system integration Problem-Solving: Strong analytical and problem-solving skills with the ability to troubleshoot and resolve technical issues Communication: Excellent verbal and written communication skills. Ability to explain technical concepts to non-technical users Physical Requirements: Ability to lift and carry equipment, work in various environments, and perform tasks that may require climbing ladders or working in confined spaces Certifications: Relevant certifications such as Certified Access Control Technician (CACT) or similar are a plus Physical Demands The physical demands described here represent those that must be met by an employee to perform the essential functions of this position successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use both hands and fingers, handle or feel objects, tools, or controls. The employee is required to stand for long periods of time; walk for extended periods of time; sit; squat; kneel and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. Work Environment The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee regularly works with moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Benefits: Comprehensive medical coverage Dental and vision insurance 401(k) Paid time off and paid holidays Perimeter Solutions Group is the premier provider of fence, gates, automation/access controls, and rental barriers in the US with locations in Tampa, Lake Helen FL, McDonough GA, Savannah GA, Phoenix AZ and Glendale AZ. PSG is a rapidly growing and expanding platform, performing a over 1,000 installations annually including commercial, educational, military, governmental, and alternate energy properties throughout the southern U.S. Pay Range USD $23.00 - USD $32.00 /Hr.

JOB POSTING JOB TITLE: Automation / Robotics Technician, Level 1 DEPARTMENT: Automation and Robotics Department REPORTS TO: Automation and Robotics Manager PURPOSE OF POSITION: Complete assembly of automated and robotic systems including sub-systems, mechanical systems, electric enclosures and field wiring including controls and power signals. Troubleshooting of systems during implementation, testing and maintenance phases. EDUCATION & EXPERIENCE: • Basic knowledge and understanding of low power controls systems, pneumatic systems, PLCs, Servo and VFD Controllers with all associated ancillary components such as electric motors, sensors, instrumentation and actuators. • Good understanding of industrial machinery, safety, and applications in a production environment. • Excellent mechanical aptitude and communication skills. • Knowledge of Fanuc collaborative robots is a plus. • Knowledge of CNC machines and Renishaw probing. • Problem solving, resourcefulness and team DESCRIPTION OF JOB DUTIES: As a core member of the Automation & Robotics Team, you will work together as a team to install CNC tending systems, conveyors, framework, robots, and tooling. The successful candidate will work closely with Knight's Armament electrical engineers, mechanical engineers and customers to develop robotic solutions. • Assemble automation & robotic systems from prints. • Disassemble and reassemble robotics or peripheral equipment to make repairs such as replacement of defective circuit boards, sensors, controllers, encoders and servomotors. • Perform preventive or corrective maintenance on robotic systems or components. • Install, maintain, and replace automation systems at key points in the production process • Document robotics test procedures and operational test results. • Align, fit, or assemble component parts using hand tools, power tools, fixtures, templates or microscopes. • Assemble equipment or components such as new robotic systems and automated production machinery. • Fabricate jigs, fixtures using manual machines. • Maintain inventories of materials, equipment or products. • Perform additional duties as assigned by management. PHYSICAL REQUIREMENTS: Seeing: Required Speaking: Required Hearing: Required Standing: Often Walking: Often Sitting: Occasionally Lifting: Occasionally, up to 25-pounds Carrying: Occasionally, up to 25-pounds Pushing: Rarely Pulling: Occasionally Climbing: Occasionally Balancing: Occasionally Bending: Occasionally Twisting: Rarely Reaching: Occasionally Grasping/Handling: Frequently, for dexterity, fine finger handling Stooping/Crouching: Occasionally Kneeling: Occasionally Crawling: Rarely Environmental Conditions: Inside: 90% Outside: 10% Temperature Conditions: Controlled -in Excess of 70-degrees - occasionally Knight Enterprises Management, L.L.C. is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, creed, sex, national origin, age, protected veteran status, disability status, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, or any other protected factor by country, regional or local law. Knight's policies regarding recruitment, hiring, compensation, benefits, promotions, transfers, training and all other personnel matters are free from discriminatory practices and are based on merit, qualifications, and abilities. To view the U.S. Department of Labor's (DOL) Equal Employment Opportunity is the Law poster, please go to the following link: ****************************************************************

Job Description GENERAL DESCRIPTION The following is intended only as an illustration of the various types of work performed, skills and expertise required, equipment used, and special requirements and conditions. The omission of specific duties, skills, etc., does not exclude them from the position if they are similar, related, or a logical assignment to the position. ESSENTIAL JOB FUNCTIONS Is able to work any post, assignment, or shift to support the 24- hour per day, 7- day a week operation. This includes nights, weekends, and holidays; and when the need arises, adjust their schedule to accomplish a mission or operational need. Receives and responds to 911, emergency, non-emergency, complaint, and service-related phone calls. Determines nature and priority of calls by asking questions of callers, and transfers information to appropriate units or person. Operates computer-aided dispatch (CAD) system to dispatch public safety units to calls; monitors activities and location of public safety units to ensure situations are under control; provides immediate backup when needed and notifies appropriate supervisors. Operates teletype computer equipment to enter, retrieve, and transmit information regarding outstanding warrants, vehicle registrations, driver licenses, criminal histories, etc.; maintains appropriate logs and files in accordance with requirements of the Florida Crime Information Commission (NCIC and FCIC) and departmental procedures. Interacts in a professional manner via radio or telephone with the public and fellow employees and other public safety agencies. Responsible for being knowledgeable of all material contained within the Communications Center Standard Operating Guide, has a working knowledge of departmental rules/regulations and city rules/regulations. Maintains various files and logs to document information pertaining to public safety and established standards. Conducts tours and assists with public education presentations at events when needed. Performs general clerical work as required, including typing reports and records, entering and retrieving computer data, copying and filing documents, and faxing. Directs public to appropriate community resources. Trains new employees by demonstrating procedures, instructing in the operation of equipment, and teaching the knowledge, skills, and abilities needed for successful performance KNOWLEDGE, SKILLS & ABILITIES Knowledge of operating procedures for handling emergency and non-emergency calls. Knowledge of FCIC/NCIC procedures and regulations. Knowledge of Police Information Management System. Knowledge of computer-aided dispatch (CAD) system operations. Considerable knowledge of the efficient operation of radios; receiving and transmitting equipment. Ability to multi-task in a fast-paced, stressful environment, exercise good judgment and responds to various calls simultaneously and take proper action. Ability to maintain a constant attention to details while using communication equipment in noisy and confined work area with radio traffic, ringing telephones and conversations occurring simultaneously. Thorough knowledge of the geographic boundaries of the City and surrounding district including location of streets, subdivisions, important buildings, and major landmarks. Ability to type at least 30 words per minute. Ability to speak clearly in a well-modulated voice, using good diction. Ability to understand and carry out oral and written instructions. Knowledge in 911 operations. Perform coordinating work involving guidelines and rules with constant problem-solving. MINIMUM QUALIFICATIONS Graduation from high school or equivalent certification required. Valid Florida driver's license or other acceptable official identification. Basic FCIC/NCIC certification or ability to become certified within 6 months of hire. State of Florida DOH Telecommunicator Certification preferred. Knowledge of emergency medical dispatch (EMD) and successfully pass the certification test within six months of starting position. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. EQUIPMENT USED 911 telecommunication consoles, basic office equipment, e.g., computer terminals, printers, copy machines, telephone systems, facsimile machines; ability to operate Telecommunications Device for the Deaf (TDD). PHYSICAL REQUIREMENTS Must be physically able to operate a variety of machines and equipment including computer office equipment, telephone, etc. Physical demands are essentially those of sedentary work. Tasks may require extended periods of time at a keyboard or workstation. Requires the ability to talk and hear: (talking: expressing or exchanging ideas by means of spoken words; hearing: perceiving nature of sounds by ear). Work requires sitting for an extended period of time. Occasional walking, standing, lifting (under 20 lbs.), bending, pushing, pulling, kneeling and reaching overhead. JOB LOCATION Apopka Police Department, all City owned buildings/property, parks, grounds and recreation facilities. Any off-site locations and facilities utilized as part of the City's participation or involvement in an event, activity or job assignment. Occasional travel to meetings, conferences, and seminars/training schools will be required as a part of the employee's development and training. DISCLAIMER: The City of Apopka reserves the right to fill positions prior to the closing date and also reserves the right to close the posting prior to the date indicated. Positions will be filled by competitive selection from among categories of qualified and available candidates. It is the policy of the City of Apopka to give first consideration to all employees and other internal applicants prior to considering external (outside) applicants. Applicants should expect a starting salary at the minimum of the pay grade range; applicants with exceptional qualifications and/or experience may be eligible for a rate of pay which is higher than the range minimum upon approval by Administration. Your social security number is requested for the purpose of payroll eligibility verification, processing employment benefits, applicant and employee background checks, and income reporting and will be used solely for those purposes. The City of Apopka participates in E-Verify. Employers are required by federal law to verify the identity and employment eligibility of all persons hired to work in the United States. We utilize the E-Verify system to process our new hires. We provide information to the Social Security Administration and, if necessary, the Department of Homeland Security with Information from each new employee's Form I-9 to confirm work authorization.

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Employee discounts Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Wellness resources About CURIS System At CURIS System, we are redefining the future of biodecontamination. As a leading manufacturer of advanced biodecontamination devices and service solutions, our mission is to make the process safer, simpler, and smarterempowering researchers, pharmaceutical manufacturers, and healthcare professionals to focus on what matters most: saving lives and advancing science. Our patented technologies and service offerings are designed to eliminate contamination threats without exposing users to harmful chemicals or disrupting critical operations. Whether in a laboratory, cleanroom, hospital, or pharmaceutical facility, CURIS is the trusted partner for effective, efficient, and environmentally responsible biodecontamination. As a Manufacturing Electrical Technician you will play a key role in supporting CURIS Systems mission by delivering technical expertise, supporting customers,and driving innovation.. Youll work alongside a passionate team dedicated to improving global health and safety through cutting-edge biodecontamination solutions. The ideal candidate will have a strong background in electrical systems, hands-on experience with AC/DC power, and a meticulous attention to detail. Key Responsibilities Assemble and install electrical components in biodecontamination devices. Interpret and create wiring diagrams and electrical schematics. Perform wiring according to national and international standards. Work with AC power systems (110V and 220V) and DC power systems (12V and 24V). Solder electrical components with precision and care. Troubleshoot and repair electrical systems and components. Conduct quality checks to ensure compliance with safety and performance standards. Collaborate with engineering and production teams to improve processes and designs. In addition, this position requires proficiency with hand tools and the ability to pin in and out connectors.

Do you enjoy putting well-deserved TLC in your own home? Do you enjoy creating peace of mind for others? Do you want to earn what you are worth? If so, then come join our team at G&W Roofing, part of the Bone Dry Family, as a Repair technician. Our Repair Technicians complete a variety of jobs such as gutter installations and fabrication/repairs, as needed for G&W Roofing customers, all while providing exceptional service. Here at G&W Roofing we also believe in setting our technicians up for success with training opportunities, and incredible support. Duties and Responsibilities * Perform necessary repairs for homeowners as described in the scope of work. * Pick up needed material from suppliers * Manage inventory of stocked material * Work with department supervisor and communicate with customers * Collect payment from the customer, once work is completed * Follow all safety procedures * Maintain a clean and organized work environment, both on the job site and in company vehicles * Conduct yourself in a professional manner that reflects G&W in a positive manner * Other duties as assigned Requirements * Valid driver's license * Pass a background check * 1-2 years repair experience preferred but willing to train * Must be able to climb a ladder safely and work at elevated heights on roofs * Detail-oriented mindset with a commitment to delivering quality craftsmanship * Willingness to work outdoors in varying weather conditions * Military service a plus Compensation and Benefits * Commission based - 25% commission on repairs (earning potential of 50k-75k+) * Medical, Vision, and Dental Insurance * Company paid Life Insurance * Company paid short-term disability * 401(k) Plan * PTO, Vacation & Holidays * Company truck and fuel provided for work use At G&W Roofing, part of the Bone Dry Family- We build more than roofs. We build careers! Whether you begin in production as an apprentice or technician, or in administration, customer service, or sales, you will be provided great training and development, leading to career advancement opportunities. Apply and start on your career path today. Bone Dry Roofing is an Equal Opportunity/Affirmative Action employer. It is our policy not to discriminate against any Associate or Applicant. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, childbirth or related medical conditions, national origin, sex, age, disability or handicap, genetic information, citizenship status, service member status, or any other characteristic protected by federal, state or local law. This policy of nondiscrimination in employment includes but is not limited to recruitment, hiring, placement, promotion, transfer, employment advertising or solicitations, compensation, layoff, or termination of employment. If you require assistance in the application process you are welcome to contact [email protected], and a representative will be in touch.

We are seeking a Ford Certified Diesel Service Technician to join our team. The role of the Diesel Mechanic is to perform repairs and maintenance on heavy-duty and medium-duty diesel vehicles in a fast-paced environment. Successful candidates should be motivated and enthusiastic about learning. By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers! Benefits: Health, Medical and Dental 401K Plan with employer match Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Flexible Work Schedule Responsibilities Provide technical service to vehicles and equipment Read job order, observe and listen to vehicle in operation to resolve malfunction, and plan work procedures Follow checklists ensuring all critical parts are examined Examine protective guards, loose bolts, and specified safety devices on trucks, and adjust as needed Test-drive vehicles to ensure that they run smoothly Tag all warranty parts and returns to the parts department Attend training classes and keep tabs on factory technical bulletins Properly complete the service and/or repairs assigned by supervisor Complete all work according to the applicable safety requirements and published procedures Participate in, and utilize to the best of one's abilities, technical training as assigned by management Maintain your designated workspace in an organized and clean manner Ensure guest vehicles are returned as clean as they were prior to being serviced Show the utmost courtesy to all guests, visitors, and dealership personnel Make every effort to achieve the production objectives set by management Adhere to manufacturer's policies and procedures as they relate to labor operations, time, and repair order documentation when performing warranty repairs and torque specifications Any other duties as outlined by the Service Supervisor and or management Qualifications Ford Certification preferred Previous experience in a Ford dealership is a plus At least 1 year of Fleet or Dealership experience High school diploma or equivalent work experience required Teammate with a strong sense of dedication to the customer and service team Self-motivated and professional Possess own tools We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Requirements Minimum Job Qualifications: High School Diploma or equivalency Entry level sales, customer service background essential One (1) year of Military, delivery driver with sales component or health care technician experience would be considered related experience and preferred. Senior level requires two (2) years of work-related experience and one (1) year of exact job experience. Valid and unrestricted driver's license in the state of residence Physical Demands and Work Environment: Must be able to regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Must be able to stretch, bend, stoop and crouch and perform moderate to heavy physical labor while moving equipment and supplies. Subject to long periods of sitting and driving. Work environment may be stressful at times, as overall work activities and work levels fluctuate. May be exposed to unsanitary conditions in some home settings. May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen. May be exposed to high crime areas within the service community. Must be able to drive independently and travel as needed. May be exposed to angry or irate customers. Must be able to access the patient's residence without assistance. Mental alertness to perform the essential functions of position. Ability to effectively communicate both verbally and written with customers with the ability to demonstrate empathy, compassion, courtesy, and respect for privacy. AdaptHealth is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individual's race, color, religion, creed, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other status protected by applicable law. This policy applies to all terms, conditions, and privileges of employment, including recruitment, hiring, placement, compensation, promotion, discipline, and termination.

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Job DescriptionBenefits: Competitive salary Dental insurance Employee discounts Health insurance Vision insurance As an Audio Video Technician Apprentice, you will assist experienced technicians in the installation, maintenance, and troubleshooting of audio and video systems in residential or commercial settings. Your responsibilities will include: Assisting in the installation and setup of audio and video equipment, including speakers, televisions, projectors, cameras, and smart home systems. Supporting the testing and troubleshooting of audio and video systems to ensure optimal performance. Learning to operate various AV equipment and familiarizing yourself with different brands and technologies. Collaborating with the technical team to provide seamless integration of audio and video components in clients' homes. Participating in routine maintenance and updates of home audio and video systems. Helping maintain inventory and organize equipment storage areas and vehicles. Attending training sessions and workshops to enhance technical skills and knowledge. Following safety protocols and best practices when handling and installing equipment in residential environments. Acquiring and maintaining the required tools as specified in The Company's required tool list. * Must be able to lift 50 lbs * Must be comfortable in attic spaces and on ladders * Knowledge of basic tools

Job DescriptionDo you enjoy putting well-deserved TLC in your own home? Do you enjoy creating peace of mind for others? Do you want to earn what you are worth? If so, then come join our team at G&W Roofing, part of the Bone Dry Family, as a Repair technician. Our Repair Technicians complete a variety of jobs such as gutter installations and fabrication/repairs, as needed for G&W Roofing customers, all while providing exceptional service. Here at G&W Roofing we also believe in setting our technicians up for success with training opportunities, and incredible support. Duties and Responsibilities Perform necessary repairs for homeowners as described in the scope of work. Pick up needed material from suppliers Manage inventory of stocked material Work with department supervisor and communicate with customers Collect payment from the customer, once work is completed Follow all safety procedures Maintain a clean and organized work environment, both on the job site and in company vehicles Conduct yourself in a professional manner that reflects G&W in a positive manner Other duties as assigned Requirements Valid driver's license Pass a background check 1-2 years repair experience preferred but willing to train Must be able to climb a ladder safely and work at elevated heights on roofs Detail-oriented mindset with a commitment to delivering quality craftsmanship Willingness to work outdoors in varying weather conditions Military service a plus Compensation and Benefits Commission based - 25% commission on repairs (earning potential of 50k-75k+) Medical, Vision, and Dental Insurance Company paid Life Insurance Company paid short-term disability 401(k) Plan PTO, Vacation & Holidays Company truck and fuel provided for work use At G&W Roofing, part of the Bone Dry Family- We build more than roofs. We build careers!Whether you begin in production as an apprentice or technician, or in administration, customer service, or sales, you will be provided great training and development, leading to career advancement opportunities. Apply and start on your career path today. Bone Dry Roofing is an Equal Opportunity/Affirmative Action employer. It is our policy not to discriminate against any Associate or Applicant. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, childbirth or related medical conditions, national origin, sex, age, disability or handicap, genetic information, citizenship status, service member status, or any other characteristic protected by federal, state or local law. This policy of nondiscrimination in employment includes but is not limited to recruitment, hiring, placement, promotion, transfer, employment advertising or solicitations, compensation, layoff, or termination of employment. If you require assistance in the application process you are welcome to contact **********************, and a representative will be in touch.

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Employee discounts Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Wellness resources About CURIS System At CURIS System, we are redefining the future of biodecontamination. As a leading manufacturer of advanced biodecontamination devices and service solutions, our mission is to make the process safer, simpler, and smarter-empowering researchers, pharmaceutical manufacturers, and healthcare professionals to focus on what matters most: saving lives and advancing science. Our patented technologies and service offerings are designed to eliminate contamination threats without exposing users to harmful chemicals or disrupting critical operations. Whether in a laboratory, cleanroom, hospital, or pharmaceutical facility, CURIS is the trusted partner for effective, efficient, and environmentally responsible biodecontamination. As a Manufacturing Electrical Technician you will play a key role in supporting CURIS System's mission by delivering technical expertise, supporting customers,and driving innovation.. You'll work alongside a passionate team dedicated to improving global health and safety through cutting-edge biodecontamination solutions. The ideal candidate will have a strong background in electrical systems, hands-on experience with AC/DC power, and a meticulous attention to detail. Key Responsibilities · Assemble and install electrical components in biodecontamination devices. · Interpret and create wiring diagrams and electrical schematics. · Perform wiring according to national and international standards. · Work with AC power systems (110V and 220V) and DC power systems (12V and 24V). · Solder electrical components with precision and care. · Troubleshoot and repair electrical systems and components. · Conduct quality checks to ensure compliance with safety and performance standards. · Collaborate with engineering and production teams to improve processes and designs. In addition, this position requires proficiency with hand tools and the ability to pin in and out connectors. Compensation: $22.00 - $25.00 per hour Decontamination Equipment Welcome to CURIS System, the leading innovator in decontamination equipment designed to meet the rigorous demands of today's contamination control standards. Our pioneering hydrogen peroxide-based portable disinfection equipment provides high-level disinfection that can be effectively utilized in any environment without sacrificing power or reliability. Whether you're looking to address the needs of biosafety-level laboratories, cleanrooms, pharmaceutical manufacturing facilities, health-care facilities, or any industry requiring meticulous bio-decontamination, our solutions offer unmatched portability and efficacy. As experts in industrial decontamination, we ensure that our systems deliver consistently thorough treatments, helping maintain safety and a high-level of sterility assurance in an environment. At CURIS System, we understand the importance of reliable decontamination equipment in preventing cross-contamination and minimizing human error. Our advanced technology not only reduces the need for harmful or toxic chemicals but also includes comprehensive documentation capabilities, allowing users to record and track disinfection data. We blend cutting-edge technology with strategic processes, ensuring superior contamination control. Careers Interested in exploring career opportunities with CURIS System? As a global leader in decontamination technology, we continue to experience rapid growth and are always interested in speaking with new talent interested in joining our team. From administrative staff to engineering and research/development to sales and everything in between, we are always looking for people to join our journey in making a difference.

AdaptHealth Opportunity - Apply Today! At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives - out of the hospital and in their homes. We are actively recruiting in your area. If you are passionate about making a profound impact on the quality of patients' lives, please click to apply, we would love to hear from you. Medical Equipment Technician Medical Equipment Technicians are responsible for ensuring safe delivery, providing setup, and education in usage of home medical equipment for our customers. Setup is done in their home, long-term care setting, clinic or any location deemed necessary to service patients. Job Duties: * Develop and maintain working knowledge of current HME products and services offered by the company and all * applicable governmental regulations. * Comply with all applicable company policies and procedures. * Educate customers in proper use and care of respiratory and HME equipment in a home setting. * Complete required documentation following equipment setup, delivery or pickups as required. * Assist with customer equipment problems under emergency conditions. * Process all orders in a timely, accurate manner. * Promote services and products to referral sources in the community as appropriate. * Develop basic reimbursement knowledge and completely document all information necessary to ensure * reimbursement for all appropriate equipment, products, and services. * Assist with implementation of quality improvement program to meet company policies. * Maintain home oxygen systems through regularly scheduled visits to customers. * Safely drive and maintain company vehicle. * Perform patient assessment and re-assessment for patient care. * Perform routine preventative maintenance and simple repairs on equipment as required in accordance with * company policies. * Report equipment hazards and/or product incidents as required in accordance with company policies and * procedures. * Develop and maintain working knowledge of current HME products and services offered by the company. * Assume on-call responsibilities during non-business hours in accordance with company policy. * Retain knowledge of and consistently adhere to procedures for the use of Personal Protective Equipment (PPE), * infection control and hazardous materials handling. * Maintain patient confidentiality and function within the guidelines of HIPAA. * Completes assigned compliance training and other educational programs as required. * Maintains compliant with AdaptHealth's Compliance Program * Responsible for cleaning equipment when assigned by supervisor or down time allows, following the Branch * Maintenance and Cleaning Guidelines * Perform other related duties as assigned. Requirements Minimum Job Qualifications: * High School Diploma or equivalency * Entry level sales, customer service background essential * One (1) year of Military, delivery driver with sales component or health care technician experience would be * considered related experience and preferred. * Senior level requires two (2) years of work-related experience and one (1) year of exact job experience. * Valid and unrestricted driver's license in the state of residence Physical Demands and Work Environment: * Must be able to regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. * Must be able to stretch, bend, stoop and crouch and perform moderate to heavy physical labor while moving equipment and supplies. * Subject to long periods of sitting and driving. * Work environment may be stressful at times, as overall work activities and work levels fluctuate. * May be exposed to unsanitary conditions in some home settings. * May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen. * May be exposed to high crime areas within the service community. * Must be able to drive independently and travel as needed. * May be exposed to angry or irate customers. * Must be able to access the patient's residence without assistance. * Mental alertness to perform the essential functions of position. * Ability to effectively communicate both verbally and written with customers with the ability to demonstrate empathy, compassion, courtesy, and respect for privacy. AdaptHealth is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individual's race, color, religion, creed, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other status protected by applicable law. This policy applies to all terms, conditions, and privileges of employment, including recruitment, hiring, placement, compensation, promotion, discipline, and termination.

JOB POSTING JOB TITLE: Engineering Revit Tech DEPARTMENT: Engineering REPORTS TO: Engineering Manager PURPOSE OF POSITION: To support Knight's Armament Company by contributing to the design and documentation of firearms manufacturing facilities by creating models and creating drawings of the facilities and its infrastructure. SPECIAL TRAINING NEEDED: * Certificate of completion with demonstrated Autodesk Revit /CAD capability. * Familiarity with Building Information modeling (BIM) techniques. EDUCATION & EXPERIENCE: * Experience with Revit software, BIM and design, as well as Solid Works, and other engineering analysis software. ANSI-Y-14.5 drawing terms and tolerances. * Knowledge of drawing and plan production. Model management. * Working knowledge of building modeling and detailing. * Experience in developing and maintaining a record-keeping system; proof-reading record to verify accuracy. DESCRIPTION OF JOB DUTIES: * Produce and update detailed drawings and 3D models using Revit Architecture software of buildings, structures and associated mechanical, electrical and plumbing systems. * Develop and update detailed machine / office layout to optimize available space, while streamlining production flow.• Manage the BIM models, ensuring they are up-to-date, accurate and consistent with project requirements. * Collaborate with management, engineers and other stakeholders to incorporate design changes and ensure the models reflect the design intent. * Will at times work with project manager * Train others in processes and procedures as required. * Maintain the confidentiality of Knight Enterprises Management, LLC designs, data procedures and processes. * Produce drawings at scale to assist in building layout and functionality. * Additional duties as assigned by management. PHYSICAL REQUIREMENTS: * Seeing: Required * Speaking: Required * Hearing: Required * Standing: Occasionally * Walking: Occasionally * Sitting: Occasionally * Lifting: Rarely, up to 10 pounds * Carrying: Rarely, up to 25-pound * Pushing: Rarely * Pulling: Rarely * Climbing: Rarely * Balancing: Rarely * Bending: Rarely * Twisting: Occasionally * Reaching: Occasionally * Grasping/Handling: Rarely, for dexterity, fine finger handling * Stooping/Crouching: Rarely * Kneeling: Rarely * Crawling: Rarely Environmental Conditions: Inside: 90% Outside: 10% Temperature Conditions: Controlled -in Excess of 70-degrees - occasionally Knight Enterprises Management, L.L.C. is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, creed, sex, national origin, age, protected veteran status, disability status, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, or any other protected factor by country, regional or local law. Knight's policies regarding recruitment, hiring, compensation, benefits, promotions, transfers, training and all other personnel matters are free from discriminatory practices and are based on merit, qualifications, and abilities. To view the U.S. Department of Labor's (DOL) Equal Employment Opportunity is the Law poster, please go to the following link: ****************************************************************

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location: