Electronics technician jobs in Florence-Graham, CA

We are exclusively representing a leading distributor of Electronic Test and Measurement equipment who are looking for a calibration technician. Calibration Technician The Calibration Technician is responsible for maintaining and coordinating the inspection and calibration of all test and measurement equipment, instruments, and related products. This ensures all equipment functions properly and meets industry standards. Key Responsibilities: Inspect, calibrate, and document equipment Create purchase requisitions for calibration services and materials Ship equipment to domestic and international suppliers Maintain accurate records in the system for all instruments and equipment Support internal and external quality audits Coordinate calibration efforts with internal departments and external vendors Respond to inquiries from internal teams and suppliers Monitor and follow up on equipment status with relevant departments Track purchase orders and invoices related to calibration activities Qualifications: 3-5 years of experience in calibration or working in regulated industries requiring precision measurement Proficiency with Microsoft Office (Outlook, Excel, Word)

Test Technician Needed in Camarillo Test Technician Needed in Camarillo Industry: Aerospace Production and Manufacturing Pay Range: $25 - $28/hour DOE 6am - 4:30pm Monday - Saturday Responsible for: Testing of product components and parts; along with performing other basic sub-assembly test procedures and equipment setup under supervision. Position Duties: Essential Functions of the position include, but are not limited to: Test assemblies per blueprint, ATPs and specifications daily. Perform in process inspections. Meet production schedule. Request material from stockroom as necessary. Learn new products and functions as required. Understand/perform all production processes without help. Assist in training of new personnel. Ensure policies and procedures are followed. Promote team work and constructive work behaviors. Qualifications: High School diploma or equivalent. Able to read blueprints, specifications and schematics. Soldering experience preferred but not required. Must have good oral, written communications and have a high level of moral and ethical codes. Basic calculations, with a calculator to determine equivalent measurements, settings or outputs from equations. Basic electronics understanding to set-up and operator test equipment. Low-voltage and high-voltage testing experienced. Must be to read, write and speak English. Operates a variety of mechanical/electrical and small precision hand tools to test parts and sub-assemblies for final assembly. Performs equipment set-ups, both testing fixtures and equipment, along with filling out test data accurately and effectively. Job description table. Test Technician Lvl Yrs* Description of Activities Part# Std or better (Or Equivalent)** I 0-2 Perform Testing in 1 of the areas below: EM (E-line) - Eaton motors requiring multiple stages for different components on the top assy EM (Non E-line) - Test both motors and components such as fields and rotors. ESPG - Test starter generators completely GCU - Test ground control units completely, including programming/pairing DGCU boards, setting potentiometers, and other test-related or test preparation activities as needed. n 48485 (P06), C6589-15/-16, D2113-5/-7,M205D101-3,5561D100-5 n 10805-190, 21210-191, 37056/B37057 (K024), 38184 (K097), S693 (H661), G587 (B946) n 400SG180Q, 160SG143Q, 200SGL1153Q, 300SGL146Q n GCS550-11/-12, GCSG501/-2, GCSG505-15E/-21 II 2-5 Be able to test 1 area above, all part numbers to sufficient production and quality standards independently. Including troubleshooting problems with both the production unit and test equipment. See above III 2-5 Be able to test 2 areas above, all part numbers to sufficient production and quality standards independently. Including troubleshooting problems with both the production unit and test equipment. See above IV 5-10 Be able to test 3 areas above, all part numbers to sufficient production and quality standards independently. Including troubleshooting problems with both the production unit and test equipment. See above V 10+ Be able to test all areas above, all part numbers to sufficient production and quality standards. Including troubleshooting problems with both the production unit and test equipment. Also be the Lead of the area. Directing work, enforcing the rules, provide OTJ training, and supervising the test area. See above + Lead * Years are a guideline and are to be used at the discretion of the supervisor of the area. ** Part numbers are guidelines and equivalents can be used at the discretion of the Supervisor Physical Demands: While performing the duties of this position, the employee is regularly required to stand, use hands and fingers to handle or feel objects, tools or controls. The employee frequently is required to walk, bend, stoop, kneel, or crouch and reach with hands and arms, climb or balance. Must occasionally lift up to 45 pounds. Specific vision abilities include close vision, distance vision, peripheral vision, color vision, depth perception, and the ability to adjust focus. Other: Must be authorized to work in the U.S. International Trade Compliance Requirements: This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). This position requires either a US Person (as defined in applicable export regulations) or a non-US person who is eligible to obtain required export authorization. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Johnson Service Group, an award-winning staffing company is looking for a detail-oriented and motivated Test Technician to join our team. This entry-level role is ideal for individuals with a passion for electronics and hands-on testing. The successful candidate will assist in the testing, troubleshooting, and repair of power supply units, ensuring products meet quality and performance standards. Pay Rate: $25.00 HR Key Responsibilities Perform functional and electrical testing of power supply units according to established procedures. Troubleshoot and diagnose issues in electronic assemblies using test equipment and schematics. Execute soldering tasks, including rework and repair of surface mount and through-hole components. Maintain accurate test records, documentation, and data logs. Work closely with engineers to provide feedback and support product development and continuous improvement. Ensure all work complies with company safety, ESD, and quality standards. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

in Manhattan Beach, CA Pay: $14 to $25 per hour 2661 with a large international defense / aerospace company * Microelectronic Technician * Please apply ONLY if you have familiarity with vacuum pumps, gas systems, and cleanroom operations United States Citizenship is required due to government contract requirement; we are unable to sponsor at this time. We can ONLY consider your application if you have: 1: High school diploma or GED. 2: 2+ years of experience in equipment maintenance or technical trade. 3: Strong mechanical aptitude and ability to read schematics, manuals, and technical drawings. 4: Familiarity with vacuum pumps, gas systems, and cleanroom operations. 5: Comfortable working independently in a research-driven environment with frequent tool changeovers. 6: This position requires the applicant to be a U.S. citizen. We are looking for a Semiconductor Equipment Support Technician for Semiconductor Fabrication DESIRED (not required) SKILLS: :: Associate degree or technical training in Mechatronics, Electronics, or related field. - Experience with legacy semiconductor tools, including both wet and dry processes. :: Exposure to low-volume, high-mix R&D or prototyping environments. :: Basic understanding of process flows across front-end and back-end semiconductor fabrication. :: Familiarity with safety protocols related to gases, chemicals, and high voltage equipment. Duties and Responsibilities == Perform preventive and corrective maintenance on a broad range of front-end and back-end semiconductor equipment (e.g., steppers, evaporators, sputters, implanters, etchers, coaters/developers, and dicing saws). == Troubleshoot and repair mechanical, electrical, vacuum, pneumatic, and basic software/control issues across legacy and custom tools. == Partner with process engineers, researchers, and tool owners to rapidly diagnose and resolve equipment problems in a dynamic Production/R&D setting. == Log maintenance activities, downtime events, and parts usage in internal tracking systems. == Support tool installations, decommissioning, and upgrades, including coordination with vendors and facilities teams. == Maintain and order critical spares, consumables, and safety components. == Follow cleanroom protocols and ensure tools meet safety, cleanliness, and calibration standards. == Participate in continuous improvement projects to enhance tool uptime, reduce maintenance cycles, and improve user satisfaction. No interview, relocation or living expenses provided Please send resume to - Amarx Search, Inc. - amarx.com

The Electrical & Instrumentation (E&I) Technician is responsible for installing, maintaining, calibrating, troubleshooting, and repairing electrical systems and instrumentation equipment used to monitor and control industrial processes. The technician ensures all work is completed in compliance with safety and operational procedures. Key Responsibilities: Install, maintain, and repair electrical systems, motors, VFDs, panels, and wiring in accordance with electrical codes and safety standards. Calibrate, troubleshoot, and repair instrumentation devices such as flow meters, pressure transmitters, temperature probes, level sensors, and control valves. Perform preventive and predictive maintenance on electrical and instrumentation systems. Use PLCs, DCS, and SCADA systems for troubleshooting and control adjustments. Read and interpret electrical and instrumentation schematics, P&IDs, loop diagrams, and wiring diagrams. Ensure all documentation for maintenance, calibration, and repairs are properly completed and filed. Support plant operations by responding to equipment failures and process disruptions. Work closely with engineers, maintenance staff, and operations to improve equipment reliability. Comply with all company safety procedures, policies, and regulatory guidelines (e.g., NEC, OSHA, NFPA 70E). Qualifications: Education/Experience: High school diploma or GED required. Associate's degree or technical certification in electrical/instrumentation or industrial technology preferred. Minimum 3-5 years of experience in a heavy industrial or manufacturing environment. Certifications (Preferred but not required): ISA Certified Control Systems Technician (CCST) Journeyman Electrician License OSHA 10/30 or NFPA 70E Training Skills: Strong knowledge of AC/DC electrical systems, instrumentation calibration, and process controls. Familiarity with PLC programming and HMI/SCADA interfaces. Proficient in the use of diagnostic tools (multimeters, meggers, calibrators, etc.). Ability to work from heights, in confined spaces, and in all-weather conditions. Strong problem-solving and analytical skills. Work Environment & Physical Requirements: Must be able to lift up to 50 lbs, climb ladders, and work in elevated areas. Exposure to noise, dust, chemicals, and varying temperatures. Must be willing to work overtime, on-call, or rotating shifts as needed.

Electronic Tech Pay Rate: $46.31/hr. Sign-on Bonus: $500 after 30 days, $500 after 6 months, Category/Shift: Hourly, Full-Time (running shifts: 1st, 2nd, or 3rd TBD) Physical Location: International Paper 1350 223rd Street Carson, CA 90745 The Job You Will Perform: * Following all safety rules and practices * Performing preventive maintenance activities such as lubricating, measuring wear, measuring positions, repositioning components; and observing operations, vibrations, and noise level * Troubleshoot and resolve electrical and mechanical issues in a safe and efficient manner * Performing emergency / break down maintenance as necessary to support plant operations both electrical and mechanical * Performing electrical, mechanical, pneumatic, hydraulic, steam system, and other repairs and installations as needed * Install, test, inspect, repair, and maintain electrical systems and components including; relays, switches, and motors, and position sensing devices such as proximity switch timers, scanners and photo electric devices * Read and interpret electrical and mechanical schematics, diagrams, and manuals. * Plan layout and installation of electrical wiring, equipment, and fixtures based on job specifications and local codes. * Utilize electrical test equipment and meters, PCs with associated software/hardware, and other diagnostic equipment to troubleshoot and repair electrical/electronic systems and components. * Accurately using measurement and test equipment * Utilize hand tools, power tools, shop tooling equipment, measurement devices, and other equipment to safely perform electrical and mechanical tasks. * Safely operate powered industrial trucks, aerial lifts, and company vehicles. * Evaluate and assist facility with electrical safety compliance per company policy and NEC, including NFPA 70E workplace practices. * Complete work order process within CMMS system (SAP) and other paperwork relevant to the job. * Accomplish tasks with little or no supervision. * Work with maintenance and production teams to ensure facility or production mechanical equipment is maintained on a daily basis. * Accurately and completely preparing and maintaining maintenance records and other paperwork * Coordinate with contractors and vendors as needed. * Ensure maintenance work area is clean to a safe level, organized, and maintained especially after completing assigned tasks * Perform other duties as assigned. The Skills You Will Bring: * Preferably technical training and/or a two-year technical degree in industrial maintenance or related field is a plus * Three or more years of experience in industrial electrical maintenance, preferably in a corrugating or converting facility, or similar manufacturing environment. * Must have strong electrical and mechanical troubleshooting experience and proven ability in repairing equipment. * Thorough knowledge of industrial electrical systems and controls * Knowledge of PLCs, AC / DC drives, AC / DC motors, contactors, relays, sensors, switches, networking and safety components, photoelectric devices, position feedback devices, and other related components. * Able to read and interpret electrical and mechanical technical documentation. * Working knowledge of PC hardware/software systems (Microsoft, Rockwell Automation, Siemens, SICK, and various OEM products). * Working knowledge of power transmission systems, hydraulics, and pneumatics. * Experience in preventative mechanical and electrical maintenance * Must provide own tools; specialty tools will be supplied. * Able to work any shift, overtime, weekends, and be on call as needed. * Able to effectively communicate with maintenance team, production supervisors, and contractors or venders. * Able to perform all tasks safely in accordance with company rules and facility guidelines. The Benefits You Will Enjoy: International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement), and Voluntary Benefits including insurance for home, auto, vision and pets. The Career You Will Build: Leadership training, promotional opportunities within a global company The Impact You Will Make: We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're Proud to be IP. The Culture You Will Experience: International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. The Company You Will Join: International Paper (NYSE: IP) is a global producer of sustainable packaging, pulp and other fiber-based products, and one of the world's largest recyclers. Headquartered in Memphis, Tenn., we employ approximately 39,000 colleagues globally who are committed to creating what's next. We serve customers worldwide, with manufacturing operations in North America, Latin America, North Africa and Europe. Net sales for 2023 were $18.9 billion. Additional information can be found by visiting internationalpaper.com. International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or **************. Share this job: Location: CARSON, CA, US, 90745 Category: Hourly Job Date: Nov 9, 2025 If you are not finding suitable opportunities, please click below to join our talent community! Join Our Community Nearest Major Market: Los Angeles

Amentum is seeking an Electronic Technician to join our team in Hawthorne, Nevada to support the Hawthorne Army Depot. The Electronic Technician will be a key technical staff member with the electronics repair/maintenance department. Typical functions include the repair, overhaul, adjusting, modifying, and testing various types of mechanical and electrical controller instruments, recorders, flow meters, flow transmitters, fluid controls, solid state components, boiler & material handling equipment controls, and water meters. Electronic Technician will use various best practice repair methods and test equipment such as VOM, VTVM, DVM, power meters, oscilloscopes, frequency counters, and signal generators. Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance. Typical Responsibilities Include: Maintain, troubleshoot, overhaul, repair, install, modify, assemble, electronic equipment and systems such as: computer based intrusion alarm systems, closed circuit TV system, radio communication, plant fire systems, audio/visual systems, motor speed controls, photo cell amplifiers, electronic air filters, electronic pyrometers and regulators, electronic water chlorination system, battery chargers, medical equipment, and automatic temperature control units. Repair, overhaul, adjust, modify, and test various types of mechanical and electrical controller instruments, recorders, flow meters, flow transmitters, fluid controls, solid state components, and boiler and material handling equipment controls, water meters. Use and maintain all tools and equipment necessary to perform assigned tasks if properly qualified and authorized by supervision. Responsible for location and clearance of underground power cables (up to 4160 volts), and fire alarm and signal cables prior to excavation. Use, and test equipment such as VOM, VTVM, DVM, power meters, oscilloscopes, frequency counters, and signal generators. Maintain railroad crossing signal equipment for three locations on US Highway 95. Perform all work safely and with the utmost concern for the safety of self and other employees. Perform all work in compliance with environmental permits and regulations. May be required to work overtime. Be at work when scheduled and maintain a good attendance record. Performs other duties of the same or lower level of difficulty than those listed. Work in close proximity to and or in a chemical/munitions demilitarization facility. Responsible for reporting actual and potential safety and environmental concerns. Uphold company values of Safety, Diversity, Integrity and Success. Maintain high ethical standards, overall values of the business, and the Code of Ethics and Standards of Business Conduct. Basic Qualifications: Must be 18 years or older. High School Diploma or equivalent required. Four (4) years experience, including certifiable technical training, as an apprentice or one (1) year as a journeyman electronics mechanics. Read, write and perform mathematical calculations, understand and carry out oral and written instructions, satisfactorily follow rules and procedures. Minimum Qualifications: Must be 18 years or older. Four (4) years experience, including certifiable technical training, as an apprentice or one (1) year as a journeyman electronics mechanics. High School Diploma or equivalent required. Be available for standby duty. Must be computer literate in common software applications and able to operate general office equipment. Data logging, record keeping. Must maintain fitness-for-duty standards to perform the essential functions of the position, to include any HWAD drill, contingency and/or emergency requirement. Must be able to work in a constant state of alertness in a safe manner. Perform safety sensitive duties. Must be able to work well with people and as a Team Player. Must be able to obtain and maintain all certifications as required by Amentum's Master Training. Perform skilled to semi-skilled tasks including but not limited to operating and maintaining equipment, tools, vehicle, and material handling equipment Be able to use test equipment such as VOM, VTVM, DVM, power meters, oscilloscopes, frequency counters, and signal generators. Must be able to obtain and maintain a valid State driver's license. Must be able to obtain and maintain the appropriate level of government security clearance Must be a United States or naturalized citizen able to obtain and maintain Hawthorne Army Depot (HWAD) site access. Must be able to obtain and maintain a Secret US Government Clearance, as well as a clearance through the Bureau of Alcohol, Tobacco, and Firearms and be favorably vetted through the NCIC III System.Note: US Citizenship is required to obtain both of these clearances. Desired Qualifications Certified technical or trade school training highly desirable. Safety Sensitive Position This position is designated as a safety sensitive position and is subject to the requirements of the HWAD Medical Surveillance Plan and Matrix and the HWAD A&D Program. As a condition of employment, candidates and incumbents must favorably complete a personnel security investigation, drug testing, medical exam and respiratory screening, and must meet and maintain personnel suitability and reliability requirements established by 29 CFR and Army Regulations: AR 190-11, AR 190-13 and DOD Contractors Safety Manual 4145.26. Compensation: The starting hourly rate for this position is between $29.49-$39.61 (Per the [CBA]). Factors which may affect starting pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate. Benefits: Medical, vision, dental, STD and life insurance, PTO-120 hours per year, accrued at 4.62 hours per pay period, Sick leave-One (1) hour of accrual for every thirty (30) hours worked, Paid Holidays-Eleven (11) per calendar year, 401K. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

**Crane Aerospace and Electronics** has an exciting opportunity for an **Electronics Technician** for our **Brake Control Unit** factory (Electronic Assembly) at our **Burbank, CA** location. **About Crane:** Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Every 1.2 seconds, product built at our Crane Aerospace & Electronics Burbank facility is stopping aircraft - delivering passengers and military personnel safely to their destination. Home to our Landing & Cabin Systems team, Crane A&E's brake control systems and premium cabin actuation solutions are flying on tens of thousands of aircraft throughout the world. You'll join a business with a long track record of engineering excellence, set in the wonderful town of Burbank filled with great community atmosphere, schools, weather and no shortage of entertainment. Start the next chapter of your career with Crane Aerospace & Electronics! **Job Summary:** The Electronics Technician works under close direction/supervision and is responsible to test, troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment and systems, such as computer equipment, instrumentation, digital / analog, electronic products, test equipment, electro-mechanical products, applying principles and theories of electronics, electrical circuitry, and electronic testing. **Essential Functions:** + Read blueprints, wiring diagrams, and schematic drawings; Use manufacturing and engineering instructions for testing assembled electronic or mechanical units, applying knowledge of electronic or mechanical theory and components + Create non-conformance reports including detailed description of testing performed, resulting failure and initial root cause investigation results Perform all testing operations within assigned functional area + Interpret and work in accordance with work orders, drawings and schematics, functional and acceptance test procedures, failure reports, manuals and all other applicable engineering and production specifications + Calibrate or otherwise adjust assigned units by such means as component selection, potentiometer adjustment, clocking or other positioning, shimming, tension or coil adjustments, bearing and gear adjustments, as appropriate for specific unit; Make required mathematical calculations for voltage, resistance, current, impedance, amplification, flow rate and mass, mechanical dimensions and adjustments + Perform automated testing and performance testing using a variety of automated testing equipment and special test console to simulate in-service specifications, including but not limited to: vibe, burn in, thermal cycle and flying probe & ICT + Perform manual testing involving setup, adjustment, operation and interpretation of results from standard and special purpose test equipment, applicable to assigned product area, such as differential and multi-meters, signal generators, power supplies, bridges, oscilloscopes, altitude chamber, flow meter and hi-pot + Test units in other programs not normally worked on and units of greater complexity under close supervision + Practice safe work habits as established by OSHA and Crane policy + Supports Crane Business System (CBS) initiatives including 5S, KPI's, Standard Work, Problem Solving, and other initiatives as they arise + Maintain system logs and manuals to document testing and operation of equipment + Flexible and willing to work overtime when necessary + Any other task assigned by supervisor or management **Minimum Qualifications:** + **Experience:** 3 to 5+ years of experience in a related field, or equivalent educational experience + **Knowledge** : Extensive knowledge of methods and procedure in troubleshooting, circuitry or mechanical characteristics as related to area of assignment and ability to devise and adapt; Familiarity with product flow through a manufacturing or repair environment; Working knowledge of computer systems + **Skills:** Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing) + **Abilities:** Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems + **Education/Certification:** AA degree in Electronic or Mechanical Technology, or equivalent knowledge through experience or other recognized educational institution. Requires a minimum of High School Diploma or equivalent. + **Employment Eligibility Requirement:** This position may require access to Controlled Data or Information. Where the position requires such access only US persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR). **Preferred Qualifications:** + Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods + Knowledge of practical application of engineering electronics, science, and technology including applying principles, techniques, procedures, and equipment to the design and production of various goods and services + Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming **Working Conditions:** + Working conditions are normal for a manufacturing environment + Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE + May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes + May require occasional travel to support customer + Flexible and willing to work overtime if necessary + Standing: 20% *percentage is approximate and may vary depending on work task + Sitting: 80% *percentage is approximate and may vary depending on work task + Lifting (in pounds): up to 35 pounds Pushing (in pounds): up to 100 pounds + Mental/Visual: use of microscope and computer + Workspace: clean bench Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs. **_Salary range:_** **_Technician Level II - $24.00 to $34.50_** **_Technician Level III - $30.60 to $43.46_** As a team member at Crane Aerospace and Electronics, you'll enjoy: + **Benefits:** Health care, dental, vision, life and disability insurance starting the first day of the month + **Time Off:** 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. + **401k Retirement Plan:** 401k plan with company match + **Education Reimbursement:** eligible after 90 days of employment You can see a list of our benefits at *************************************** or visit our website at *************** for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. _This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job._ _Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status._ At Crane, we believe that attracting and retaining the highest quality people is the best insurance of success. Our goal is to recruit talented people and train them within a culture that calls for performance with trust and respect. Join us. The unique backgrounds and differences of our associates make us stronger, more capable, and more successful. Beyond an associate's base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement - as well as performance-based bonus programs for certain positions. Crane prioritizes career development for our associates. All associates receive an annual development plan that includes a mixture of on-the-job coaching and formal training experiences to support individual development needs. We firmly believe in associate growth that supports career progression and we will proactively support your ongoing career development.

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff. Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements. Engineering Technician II - This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience. ESSENTIAL FUNCTIONS: Incumbent must have the ability to: * Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation. * Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments. * Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements. * Provide public assistance at counter and over the telephone. * Prepare quantity and cost estimates for engineering projects. * Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes. * Review engineering plans to determine appropriate layout of construction projects. * Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades. * Make and check mathematical calculations related to surveying, drafting and basic engineering. * Maintain accurate survey records in the form of field notes and sketches. * Participate in a variety of engineering design and planning work related to municipal engineering projects. * Answer questions and provide information to the public concerning engineering activities. * Assist in development and maintenance of the record keeping and filing systems. * Prepare, assemble and distribute copies of maps, charts and blueprints. * Answer questions and provide information to the public concerning engineering activities. * Perform any other tasks or functions deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS: Position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, and stooping in the performance of daily activities. The position also requires grasping, repetitive hand movement and fine coordination in preparing reports using a computer keyboard. Additionally, the position requires near and far vision when preparing and reading written reports and other work related documents. Acute hearing is also required when providing phone and counter assistance. EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of: Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of: * Terminology, methods, practices and techniques of drafting. * Trigonometry as applied to the computation of angles, areas, distances and traverses. * Elementary surveying techniques and practices. * Engineering maps and records. Ability to: * Perform moderately complex engineering and mathematic calculations with speed and accuracy. * Understand and follow written instructions and sketches. * Use and care for drafting, surveying, and mechanical instruments and tools. * Work independently in the absence of supervision. Experience: Engineering Technician II - Two years of increasingly responsible experience performing drafting and technical engineering work. Education: Equivalent to completion of the twelfth grade supplemented by specialized training in drafting, surveying or a related field.

About Our Client: Our client, a Fortune 500 Medical Device company, is recognized as one of the “World's Best Workplaces” and a “Best Workplace for Diversity” by Fortune Magazine! This company has climbed to the top, gaining a reputation for both excellence and satisfaction and is hiring individuals who are self-motivated, results driven, and take pride in the impact their work has on patients and healthcare professionals. Key Responsibilities: Supporting and assisting engineers in designing, developing, producing, and testing components and equipment. Preparing detailed technical drawings, schematics, and layouts to support engineering projects. Conducting materials testing, analyzing results, and documenting findings. Performing equipment maintenance, calibration, and mechanical/electrical repairs. Monitoring and testing prototypes, models, and products under development. Writing technical reports, identifying issues, and suggesting corrective solutions. Collaborating with engineers and cross-functional teams to resolve technical problems. Operating, troubleshooting, and maintaining complex instruments, gauges, and testing equipment. Qualifications: Technical training or hands-on experience preferred. Demonstrating experience with complex instruments, testing equipment, and gauges. Applying technical troubleshooting skills to mechanical and electrical systems. Utilizing attention to detail and problem-solving to support engineering projects. Showing knowledge of CAD software or other engineering tools. Applying familiarity with manufacturing processes and product development cycles. Demonstrating effective communication skills in documenting and presenting technical findings. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Overview At MasTec Communications Group we build for the future. Yours and ours. As a Radio Technician III, you will develop new skills, work in a safety-minded environment, and join us in expanding technology for a better community. Join the MasTec family and help us provide the highest level of quality service to our customers and communities while maintaining our commitment to safety! Responsibilities As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport Qualifications About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport

Job Description Electronic Technician Title: Senior Electronic Technician Company: Manufacturing Industry We are seeking a highly skilled Electronics Technician to join our team. In this role, you will be responsible for troubleshooting electronic components, repairing faulty systems, and identifying the root causes of failures. You will utilize advanced diagnostic tools such as oscilloscopes, functional analyzers, and digital multimeters. The ability to read and interpret electronic schematics is essential. While aerospace experience is preferred, strong electronic experience from other industries is also highly valued. Key Responsibilities: Troubleshoot electronic components to the component level, identifying and resolving issues with precision. Repair and replace faulty components and assemblies to restore full functionality. Use oscilloscopes, functional analyzers, digital multimeters, and other diagnostic equipment to evaluate and diagnose electronic systems. Perform detailed analysis and testing to ensure accurate problem identification. Conduct thorough investigations to determine the root causes of electronic system failures. Create and maintain detailed records of repairs, diagnostics, and testing procedures. Interpret and follow electronic schematics, wiring diagrams, and technical manuals to guide troubleshooting and repair activities. Work closely with engineering and maintenance teams to address complex technical issues and support system integration. Provide technical support and guidance to team members and other departments as needed. Adhere to industry regulations and company safety standards in all repair and diagnostic activities. Qualifications: Associate's degree or equivalent in Electronics, Electrical Engineering Technology, or a related field is a plus. Relevant certifications are advantageous. Minimum of 3-5 years of experience in electronics troubleshooting and repair. Aerospace experience is preferred but not required; strong electronic experience from other fields is welcome. Proficiency in using oscilloscopes, functional analyzers, digital multimeters, and other diagnostic tools. Strong ability to read and interpret electronic schematics. Excellent analytical and problem-solving skills with the capability to work independently on complex issues. Strong attention to detail to ensure accuracy in troubleshooting and repair. Effective verbal and written communication skills for documenting technical processes and interacting with team members. Benefits: Comprehensive medical, dental and vision benefits Profit sharing bonus structure 401k matching Flexible Schedule (9/80) Every other Friday off Overtime Opportunity Opportunity for advancement

We are seeking a skilled Technician with expertise in assembling parts from subcomponents for motors. The ideal candidate will follow drawings, work instructions, and in-process inspection requirements to ensure high-quality assembly of stator windings and related components. Responsibilities * Assemble parts from subcomponents for motors following drawings and work instructions. * Operate equipment to make subcomponents, such as winders, presses, and cleats. * Cut and wind wire, insulate, and perform impregnation, buffing, painting, and testing of parts. * Interpret part drawings and engage in improvement discussions with technical support groups. * Participate in team efforts to solve departmental problems. * Position and fasten units to assemblies and subassemblies. * Connect and install electrical wiring and harnesses. * Measure dimensions and clearances of parts to determine tolerances using precision measuring instruments. * Test for mechanical reliability and inspect, test, and adjust completed units to ensure specifications are met. Essential Skills * Understanding of electrical theory and strong mechanical aptitude. * Proficiency in using precision measuring devices such as micrometers and calipers. * Significant mechanical knowledge and experience. * Excellent organizational skills and attention to detail. * Ability to read and interpret blueprints, complex assembly drawings, schematics, and diagrams. * Effective communication skills and ability to follow written and verbal instructions. Additional Skills & Qualifications * Minimum of 2 years' experience in winding AC and DC Motors, generators, or coils. * At least 8 years of related mechanical assembly experience. * High School Diploma or equivalent with related training. * Knowledge of AS9100 procedures is a plus. * Experience with lathe, mill, and drill press is desired. * Basic math skills, with algebra being a plus. * Flexibility to work overtime and travel as needed. * Excellent close vision and fine motor skills/manual dexterity required. Work Environment The role is based on a manufacturing floor environment. Candidates should be prepared to sit for prolonged periods, handle physical activities such as walking, standing, climbing, and lifting heavy items up to 50 lbs. Protective equipment must be worn as necessary. The work environment requires good eye/hand coordination and the ability to work well in a team. Pay and Benefits The pay range for this position is $20.00 - $33.15/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Chatsworth,CA. Application Deadline This position is anticipated to close on May 12, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Responsibilities: Execute cable manufacturing operations, trains junior technicians, ensures build compliance, and supports QA inspections. Perform standard cable build, soldering, and testing under supervision, ensuring adherence to IPC Class 3 workmanship standards. Support assembly and testing processes. Review schematics and other technical documentation. Maintain, clean, and perform basic upkeep of equipment. Communicate updates and technical issues to Lead. Requirements: U.S. Citizenship and Active DoD Secret Clearance. Must have IPC/WHMA-A-620 Certified Specialist (CIS), J-STJ-STD-001 Certified Specialist (CIS) and Connector Assembly Qualification. Minimum 2-4 years of cable assembly experience. Must have ability to stand, walk, sit, use both hands, and carry/lift to 50 lbs. Must be able to execute installation/lifting of heavy equipment and use of/climbing ladders. Proficiency in crimping, soldering, and harness build rework. Capable of reading and following cable drawings and travelers. $32 hr. What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

Job Details HB - Huntington Beach, CA $40.00 - $50.00 HourlyDescription To modify, rebuild, repair, or overhaul electronic and electrical equipment and controls. Applies knowledge of electronics principles in determining equipment malfunctions and applies skills in restoring equipment to operation. ESSENTIAL FUNCTIONS: Receives wiring diagrams, drawings, specifications, and instructions, either verbally or in writing, concerning emergency and scheduled repair, installation, and inspection work to be performed. Plans and performs work requiring a thorough knowledge of electrical and electronic theory and principles, wiring specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment. Plans details of working procedure to determine material or replacement needs and determines a logical approach to repair problems. Services electronic equipment by checking, testing, and replacing faulty components, circuit modules, printed circuit boards, and similar electronic devices. Performs plant-wide electronic and electrical maintenance, making operating adjustments as required. Makes sketches of parts and layout. Designs and constructs adaptations of component parts or standard parts as required. Maintains and installs communication cables, power distribution cables and wiring, and performs splicing as required. Fabricates parts as required using machine and hand tools common to trade. Informs supervisor and Machine Operators of potentially dangerous electrical equipment and corrective actions taken. Advises operators and line mechanics of standard operating procedures and requirements for working safely with electronic equipment and components as required. Maintains company-required performance and maintenance records for electronic and electrical equipment. May provide technical direction to electricians and/or other maintenance staff as required. Notifies supervisor or manager of any potential safety hazards. Performs other jobs and tasks as required. Qualifications EDUCATIONAL BACKGROUND AND WORK EXPERIENCE: Industrial Manufacturing experience, 5+ years. Minimum 5 years' experience with troubleshooting 480-volt three phase system, PLC, PCB boards and industrial motor drives. High school diploma and or equivalent. (Appropriate Technical education/training preferred). Extensive background in computer aided drafting. Extensive technical knowledge of electronics. SCHEDULE: Monday - Friday; 7:00 am- 3:30 pm WE HIRE YOU TO RETIRE YOU: Airtech offers a competitive compensation package which includes medical/dental/vision benefits, paid vacation and holidays, and a company funded retirement plan. We are a family-owned, community focused, global leader founded in 1973. We are the market leader in materials used in the manufacture of high-performance composite parts. Our products are used by the aerospace, automotive, marine, green energy, and recreational sports industries to create cutting edge lighter, stronger, and greener components. Working for Airtech means being part of a global family that believes in long term employment and promoting from within, along with personal and professional development. We put safety first to ensure we can all go home to our families after producing the best quality product in the most efficient way possible. Learn more about us at ******************** Airtech International is committed to equal employment opportunity. We do not discriminate based on an individual's race, religion, creed, color, sex (including gender identity, gender expression, pregnancy, or sexual orientation), age, national origin or ancestry, genetic information, disability, veteran status, or any other characteristic protected by applicable local, state, or federal law.

Responsibilities Data acquisition, collection and logging Collect and log raw physical and/or electronic data generated during events in support of test, training, maintenance and sustainment events. Source data collection from government or contractor sites via tapes, CD's, hard drives, or other media containing audio or visual information. Data includes configuration, logistic, test, warranty, contract, history, and maintenance information. Perform data acquisition through online data mining and receipt/processing of data submissions in hard copy and electronic formats to include document receipt, control, distribution, and archiving electronically ensuring access, retrieval, and accounting of documents acquired. Before an event, compile pre-assessment documentation and ship configuration files to develop an equipment plan for an assessment event. Before an event, generate Work Packages required to assess equipment and document ship's discrepancies during an assessment event. Courier data as required to and from designated CONUS or OCONUS location(s). Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies, selecting methods of data presentation. Requirements Experience Experience with IT systems including LINUX, Windows Power Shell command line Any of the following: CompTIA ITFF+, A+, Network+, Security+ are highly desirable Experience with Data Management Experience with reading, reviewing, and interpreting engineering and design drawings Experience working on US Navy ships in port and underway Very good written and verbal communication, along with effective time management skills Qualifications and Education Requirements 5+ years of experience working in a Engineering Technician role This position requires an existing U.S. Government granted personnel security clearance at the Secret level U.S. Citizenship is required Available to travel up to 25% Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. The hiring wage range is $ 30.60 to $ 35.20 per hour.

in Manhattan Beach, CA 2662 with a large international defense / aerospace company * Microelectronic Technician * Please apply ONLY if you have the ability to work in a cleanroom (gowned) United States Citizenship is required due to government contract requirement; we are unable to sponsor at this time. We can ONLY consider your application if you have: 1: High school diploma or GED. 2: Computer & communication skills (Microsoft Office) 3: U.S. Citizenship required. 4: Ability to work in a cleanroom (gowning required) and handle small, delicate components. 5: Excellent communication skills and a strong team-oriented attitude. 6: May require standing for long periods, lifting up to 25 lbs, and working in shifts, including nights or weekends We are looking for a Semiconductor Fab Technician for their Semiconductor Fab. - low- volume, high-mix R&D fab using 100mm wafers, including both front-end and back-end process. DESIRED (not required) SKILLS: :: Experience in FOD controlled lab environment :: Familiarity with shop order or manufacturing execution systems (MES) :: Associate degree or technical training in Electronics, or related field. - Experience with legacy semiconductor tools, including both wet and dry processes. :: Exposure to low-volume, high-mix R&D or prototyping environments. :: Basic understanding of process flows across front-end and back-end semiconductor fabrication. Duties and Responsibilities == Operate, monitor, and maintain semiconductor processing equipment (e.g., photolithography, etch, deposition, metrology, packaging). == Load/unload wafers and ensure proper documentation and handling. == Perform routine equipment startups, shutdowns, and calibrations. == Assist in troubleshooting and recovering process deviations or equipment issues. == Follow detailed work instructions, standard operating procedures (SOPs), and safety protocols. == Accurately record data and maintain production logs and reports. == Collaborate with engineers and other technicians to support process improvement initiatives. == Maintain cleanliness and safety standards within the cleanroom environment. == Standard work hours can fall into 3 different shifts: 1st Shift Mon-Thru (4am - 3pm), 2nd Shift Mon-Thru (2:30pm-1:30am), and 3rd Shift Fri - Sun (4am-3pm). No interview, relocation or living expenses provided Please send resume to - Amarx Search, Inc. - amarx.com

Job Description Pay Rate: $46.31 per hour Sign-On Bonus: $500 after 30 days $500 after 6 months The Job You Will Perform: Following all safety rules and practices Performing preventive maintenance activities such as lubricating, measuring wear, measuring positions, repositioning components; and observing operations, vibrations, and noise level Troubleshoot and resolve electrical and mechanical issues in a safe and efficient manner Performing emergency / break down maintenance as necessary to support plant operations both electrical and mechanical Performing electrical, mechanical, pneumatic, hydraulic, steam system, and other repairs and installations as needed Install, test, inspect, repair, and maintain electrical systems and components including; relays, switches, and motors, and position sensing devices such as proximity switch timers, scanners and photo electric devices Read and interpret electrical and mechanical schematics, diagrams, and manuals. Plan layout and installation of electrical wiring, equipment, and fixtures based on job specifications and local codes. Utilize electrical test equipment and meters, PCs with associated software/hardware, and other diagnostic equipment to troubleshoot and repair electrical/electronic systems and components. Accurately using measurement and test equipment Utilize hand tools, power tools, shop tooling equipment, measurement devices, and other equipment to safely perform electrical and mechanical tasks. Safely operate powered industrial trucks, aerial lifts, and company vehicles. Evaluate and assist facility with electrical safety compliance per company policy and NEC, including NFPA 70E workplace practices. Complete work order process within CMMS system (SAP) and other paperwork relevant to the job. Accomplish tasks with little or no supervision. Work with maintenance and production teams to ensure facility or production mechanical equipment is maintained on a daily basis. Accurately and completely preparing and maintaining maintenance records and other paperwork Coordinate with contractors and vendors as needed. Ensure maintenance work area is clean to a safe level, organized, and maintained especially after completing assigned tasks Perform other duties as assigned. The Skills You Will Bring: Preferably technical training and/or a two-year technical degree in industrial maintenance or related field is a plus Three or more years of experience in industrial electrical maintenance, preferably in a corrugating or converting facility, or similar manufacturing environment. Must have strong electrical and mechanical troubleshooting experience and proven ability in repairing equipment. Thorough knowledge of industrial electrical systems and controls Knowledge of PLCs, AC / DC drives, AC / DC motors, contactors, relays, sensors, switches, networking and safety components, photoelectric devices, position feedback devices, and other related components. Able to read and interpret electrical and mechanical technical documentation. Working knowledge of PC hardware/software systems (Microsoft, Rockwell Automation, Siemens, SICK, and various OEM products). Working knowledge of power transmission systems, hydraulics, and pneumatics. Experience in preventative mechanical and electrical maintenance Must provide own tools; specialty tools will be supplied. Able to work any shift, overtime, weekends, and be on call as needed. Able to effectively communicate with maintenance team, production supervisors, and contractors or venders. Able to perform all tasks safely in accordance with company rules and facility guidelines. The Benefits You Will Enjoy: International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement),and Voluntary Benefits including insurance for home, auto, vision and pets. The Career You Will Build: Leadership training, promotional opportunities within a global company The Impact You Will Make: We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're Proud to be IP. The Culture You Will Experience: International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. The Company You Will Join: International Paper (NYSE: IP) is a global producer of sustainable packaging, pulp and other fiber-based products, and one of the world's largest recyclers. Headquartered in Memphis, Tenn., we employ approximately 39,000 colleagues globally who are committed to creating what's next. We serve customers worldwide, with manufacturing operations in North America, Latin America, North Africa and Europe. Net sales for 2023 were $18.9 billion. Additional information can be found by visiting internationalpaper.com. *International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.* *International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact * reasonable.accommodations@ipaper.com * or **************.* You should be proficient in: PLC Troubleshooting Skills Heavy Equipment Repair Equipment Troubleshooting Electrical Schematics Electrical Troubleshooting Skills Mechanical Troubleshooting Skills Pneumatics Experience Hydraulics Experience Troubleshooting Industrial Automation Equipment PLC Programming Experience Experience in a Manufacturing Environment Machines & technologies you'll use: Programmable Logic Controller (PLC) Salary info: $46.31 - $46.31 / hr

Responsibilities: Execute cable manufacturing operations, trains junior technicians, ensures build compliance, and supports QA inspections. Perform standard cable build, soldering, and testing under supervision Support assembly and testing processes. Review schematics and other technical documentation. Maintain, clean, and perform basic upkeep of equipment. Communicate updates and technical issues to Lead. Education/Experience/Skills: U.S. Citizenship and Active DoD Secret Clearance. Must have IPC/WHMA-A-620 Operator-Level Training. Must have ability to stand, walk, sit, use both hands, and carry/lift to 50 lbs. Must be able to execute installation/lifting of heavy equipment and use of/climbing ladders. Exposure to crimping, soldering, and harness build rework. Capable of learning to read and follow cable drawings and travelers. $25 hr. What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!