Electronics technician jobs in Hammond, IN

Job Description: LOOKING FOR A COMPANY THAT VALUES YOUR POTENTIAL? A job with AT&T as an Automotive Equipment Technician can provide you with exactly that! AT&T offers a competitive salary, company- provided vehicles and tools and benefits that include medical, dental, paid vacation, and more! Our Automotive Equipment Technicians perform diagnosis, maintenance and repair of a diversified fleet of vehicles and other motorized/non-motorized equipment. What you'll do as an AT&T Automotive Equipment Technician: Operate and maintain all motor vehicles and motor-drive tools. Disburse gasoline; clean, lubricate and paint motor vehicles. Perform preventative maintenance including: inspections, adjustments, repairs and overhauls on all motor vehicles associated equipment (such as brakes, electrical, ignition, cooling, transmission) and construction trailers. Repair, service and test electrical and hydraulic powered equipment such as: aerial lift, generator, pumps, winches and specialized underground equipment and compressors. Receive, record and analyze reports of trouble on individual company motor vehicles and tools. Order or assist in ordering vehicles and/or specialized equipment parts. Maintain inventory and stock level in Motor Vehicle parts room Required Qualifications. In addition to STRONG communication skills, our Automotive Equipment Technicians must have the following: Certification in 1 to 5 categories of Mechanics Certification by the National Institute of Automotive Services Excellence (ASE) OR equivalent certification from an automobile manufacturer (e.g., Ford GM, Chrysler), trade school, or equivalent state license/certification. Valid state driver's license. Commercial driver's license after proper training and qualification on state and company driving tests may be required. Meet 285lbs weight limit due to safety restrictions. Ability to lift and move up to 80lbs. Ability to work a flexible schedule including evenings and weekends. Our Automotive Equipment Technicians earn between $20.48 to $49.55 per hour depending on experience. With our amazing wage opportunities, our average starting earnings begin at $72,831 per year. Individual starting salary within this range may depend on geography, experience, expertise, and education/training. Joining our team comes with amazing perks and benefits: • Medical/Dental/Vision coverage • 401(k) plan • Paid Time off and holidays (With some exceptions bargained employees qualify for one week of PTO after 6 months of service and 2 weeks after the first year). At least 6 company designated holidays and additional PTO (based on bargaining group to which you are hired). • Sick leave (may vary by state and based on bargaining group to which you are hired). • Adoption Reimbursement • Disability Benefits (short term) • Life and Accidental Death Insurance • Supplemental benefit programs: critical illness, accident hospital indemnity/group legal • Employee Assistance Programs (EAP) • Employee discounts up to 50% off on eligible AT&T mobility plans and accessories, AT&T internet (and fiber where available) and AT&T phone There is a lot to be excited about at AT&T. Apply today! AT&T will consider for employment qualified applicants in a manner consistent with the requirements of federal, state and local laws Weekly Hours: 40 Time Type: Temporary (Fixed Term) Location: Addison, Illinois It is the policy of AT&T to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, AT&T will provide reasonable accommodations for qualified individuals with disabilities. AT&T is a fair chance employer and does not initiate a background check until an offer is made. d24ad0b8-823f-4e68-a892-2986ccdf7392

Job Posting Start Date 12-15-2025 Job Posting End Date 01-26-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add an Industrial Controls Technician located in Buffalo Grove, IL. Reporting to the Systems Engineering Manager, the Industrial Controls Technician leads troubleshooting and repair electrical, controls and communication issues on complex production lines which include PLC, HMI, motion control, VFDs, servo motors/drives, industrial networks and vision inspection systems. Shift: 6am - 6pm (rotating shift) What a typical day looks like: Support Automation Technicians in troubleshooting mechanical, pneumatic and hydraulic systems and components to return equipment to production. Set up and troubleshooting of motion control systems, Servo motors/drives and VFDs. Troubleshoot, maintain, and update in-line vision systems such as Cognex. Plan, implement PLC and HMI software upgrades and perform functional verifications. Read and interpret technical manuals, electrical schematics, various programs and mechanical diagrams including complex automated system drawings. Write test procedures to demonstrate effectiveness of software/hardware upgrades. Clearly and concisely document work performed in Medical Device environment. Other duties & responsibilities: Maintain software, documentation and equipment to the latest revision or operational specifications. Identify critical devices on new equipment and assure we have all manuals, cables, software, firmware and knowledge necessary to troubleshoot, repair or replace those devices. Collaborate with the automation team in the qualification process of automated systems. Assist engineers in developing and designing hardware and software required for automation solutions per specifications. Train other technicians and operators on processes and equipment. Proper use of power tools and measuring equipment Strong awareness of safety/electrical safety. The experience we're looking to add to our team: Requires a minimum of 6 years of experience troubleshooting PLCs', HMI's, motion control, VFDs, Servo motors/drives, industrial networks and vision inspection systems. Associates degree, Military technical training or vocational training in Industrial Controls Technology. Medical device experience or other regulated industry is preferred. Software experience with: RSLOGIX, Logics Designer, Factory Talk, Ignition, Cognex, Insight, Siemens S7. AW20 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Illinois)$33.08 USD - $45.49 USD HourlyJob CategoryProduction EngineeringRelocation: Not eligible Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: NoneTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Mission Systems is looking for you to join our team as an Electronic Technician 3 based out of Rolling Meadows, IL. The selected candidate will perform routine technical functions related to supporting the design, assembly, testing, and maintenance of advanced electronic systems used in mission-critical applications. In this role, you will work hands-on with electronic assemblies, circuit boards, and test equipment to ensure systems meet performance and quality standards. This position is well-suited for someone who thrives in a fast-paced environment, who enjoys problem-solving and takes pride in delivering reliable, high-quality work. The selected candidate will work primarily during the 2nd or 3rd shift hours. What You'll Get to Do : Perform functional and performance testing, troubleshooting, and repair of LITENING targeting Pods and subassemblies Operate specialized test stations and test equipment. Perform routine operational tests and fault isolation on systems and equipment. Execute test procedures, record data, and ensure compliance with engineering specifications and military standards. Maintain test documentation, calibration records, and ensure compliance with safety and ESD protocols. Support root cause analysis of test failures and assist with data collection and corrective action implementation. Assist with environmental testing and system-level verification. Maintain compliance with safety, quality, and security standards *****NOTE: Must be available to work an off-shift schedule (2nd or 3rd shift). ***** Basic Qualifications for Electronic Technician 3 : High School Graduate and 4 years of related experience or: Electronics training equivalent to 2 years of technical trade school or military technical school Experience in military or aerospace manufacturing or depot environments. U.S. Citizen Preferred Qualifications for Electronic Technician 3 : Familiarity with testing or maintaining similar electro-optical/infrared targeting systems Familiarity with avionics systems interfaces. Knowledge of automated test systems and data acquisition software. Experience with SAP/GOLD. MANUMS Primary Level Salary Range: $63,500.00 - $105,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Employee Type: Regular-Full time Union/Non: Would you like to contribute to the protection of the environment and the operational reliability of our pipeline systems by maintaining all electrical aspects of the pipeline? The role of our Electrical Technician focuses on maintaining, troubleshooting, repairing, installing and commissioning electrical equipment. If resolving electrical components interests you, we would love to have you join our team! * Cross-border relocation not offered for this position What you will do: * Ensure that electrical maintenance work is performed in compliance with regulations and company O&M procedure requirements. * Adhere to Company safety and work policies. * Perform emergency response first responder duties. * Complete all mandatory safety and technical training. * Complete all required Operator Qualified (OQ) training and certifications. * Develop and execute equipment lock-outs and routine open system job plans. * Maintain, calibrate, and troubleshoot pipeline system electrical equipment: substation equipment, medium voltage switchgear, VFDs, 480V systems, PLC systems, instrumentation systems, petroleum quality systems, and measurement systems. * Use maintenance management system, i.e. Maximo, to document maintenance work. * Collaborate with the Area Supervisor, other Electrical Technicians, Mechanical Technicians, Technical Specialists, and PLM, to plan, schedule, and execute maintenance work efficiently and effectively * Assist Electrical & Mechanical Technicians in work group at various locations as required. * Maintain terminal and station records and update drawings as required. * Submit as-built drawings to drafting department to ensure area drawings are up to date. * Assist project teams with construction projects as assigned: design reviews, Hazops, pre-bid tours, pre-construction meetings, mechanical equipment installation, and equipment commissioning. * Communicate with and maintain a positive working relationship with the Control Center operators, Operations and Maintenance personnel, and other internal and external stakeholders. * Responsible for site security. * Implement other duties assigned by management. * Responsible for acquisition of components for repairs. * Provide justification for replacement of equipment. * Provide justification for the purchase of new equipment. * Perform tasks within the allocated operating budget for each area of responsibility. * Ensure regulatory compliance, PHMSA, OSHA, EPA, etc. * Assist with Stakeholder Engagement, Damage Prevention and Emergency Response. * Oversee contractors or project work. Who you are: You have the following education & experience: * High School Diploma or equivalent * Completion of an approved electrical apprenticeship program or 2 year electrical technical/vocational degree. * Two or more years' experience in industrial electrical maintenance. * Excellent trouble shooting ability. * Excellent interpersonal skills. * Ability to work independently with limited supervision. * Effective verbal and written communication skills. * Effective computer skills. * Valid driver's license & excellent driving record. * Must live (or relocate) within 25 miles of the reporting location. * undefined Preferred: * Electrical Journeyman or participation in an accredited Apprenticeship Program * Industrial * Experience with HVAC/experience in maintenance of crude oil pipeline system, pumping station(s) or delivery facilities or certified technical designation. Physical Requirements: Include but are not limited to: Balancing, bending and stooping, climbing, crawling, carrying (up to 50 pounds), grasping, kneeling, lifting (objects up to 75 pounds), pulling hand over hand, pushing, reaching above shoulder, repetitive motion, sitting, standing, walking, visual requirement (able to see screens, detect color coding, read fine print), hearing requirement, grasping, kneeling, light - moderate lifting (objects up to 45 pounds), reaching above shoulder, repetitive motion, sitting, standing, visual requirement (able to see screens, detect color coding, read fine print), hearing requirement. Mental Requirements: Include but are not limited to: Ability to: understand, remember and apply oral and/or written instructions or other information, understand complex problems and collaborate/explore alternative solutions, organize thoughts and ideas into understandable terminology, organize and prioritize work schedule on a short-term basis, make decisions which have moderate impact on the immediate work unit and monitor impact outside this area, understand and follow basic instructions and guidelines, complete routine forms, compose letters, outlines, memoranda and basic reports and communicate with individuals via telephone. At Enbridge, we are dedicated to our core value of Inclusion. We are proud to be an Equal Opportunity Employer. We are committed to providing employment opportunities to all qualified individuals, without regard to age, race, color, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, marital status, family status, veteran status, Indigenous status, disability, or any other reason protected by federal, state, or local law. Applicants with disabilities can request accessible formats, communication supports, or other accessibility assistance by contacting ********************. Information For Applicants: * Applications can be submitted via our online recruiting system only. * We appreciate your interest in working with us; however, only those applicants selected for interviews will be contacted. * Final candidates for this position may be required to undergo a security screening, including a criminal records check. To learn more about us, visit ****************

About Folding Guard: Folding Guard is a leading manufacturer and provider of innovative security and safety solutions for a wide range of industries. With a history spanning over 50 years, we are committed to delivering high-quality products that protect people, property, and assets. Our dedication to excellence and our customer-centric approach have made us an industry leader in security enclosures, wire mesh partitions, and other customizable security solutions. Position Overview: We are looking for a highly motivated and experienced Robot Technician with proficiency in Panasonic programming to maintain, troubleshoot, and optimize robotic systems within our manufacturing facility. The successful candidate will play a crucial role in ensuring the smooth operation of our automated processes, ultimately contributing to the overall productivity and quality of our products. Key Responsibilities: Program, set up, and operate Panasonic robotic systems to perform various tasks in the production process. Conduct regular inspections and preventive maintenance on robotic equipment to ensure optimal performance and minimize downtime. Troubleshoot and diagnose technical issues related to robotic systems, identifying root causes and implementing effective solutions. Collaborate with cross-functional teams to integrate new robotic technologies and automation solutions into existing processes. Train and mentor production staff on the proper operation and maintenance of robotic equipment. Document all maintenance activities, including repairs, adjustments, and programming changes, to maintain accurate records. Stay up-to-date with the latest advancements in robotics technology and recommend improvements to enhance operational efficiency. Qualifications: Bachelor's degree in Robotics, Automation, Mechatronics, or a related field. At least three years of experience in programming and maintaining Panasonic robotic systems in an industrial setting. Strong understanding of PLCs, HMI interfaces, and other control systems relevant to robotic automation. Proficient in reading and interpreting technical drawings, schematics, and manuals. Excellent problem-solving skills and the ability to work efficiently under pressure. Strong communication and interpersonal skills to effectively collaborate with team members at all levels. Attention to detail and a commitment to maintaining high-quality standards. Benefits: Competitive salary Opportunities for professional growth and advancement Positive and collaborative work environment Employee recognition and development programs Comprehensive benefits package including: Medical: Access to our medical insurance plan, which provides coverage for medical expenses and prescriptions. Dental: Enrollment in our dental insurance plan, helping you maintain your oral health. Vision: Participation in our vision insurance plan for regular eye exams and eyewear. 401(k) Retirement Plan: Eligibility to enroll in our 401(k) plan, with a company match of the first 6% of your contributions at a 40% match. This is an excellent opportunity for you to save for your retirement with added support from the company. Vacation: will accrue 10 vacation days Additional Information: We are looking for candidates for both first and second shifts. Folding Guard is an equal opportunity employer. We are committed to providing a workplace that is free from discrimination and harassment based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable law. Employment decisions are based on qualifications, merit, and business needs. Visa Sponsorship Disclaimer: Folding Guard regrets that, at this time, we are unable to sponsor work visas or provide immigration assistance for employment. All candidates must be legally authorized to work in the United States of America without requiring sponsorship. We appreciate your understanding in this matter. Third-party recruiters are kindly requested not to reach out to members of our staff regarding this position.

Voltguard Utilities Limited is seeking a highly skilled and motivated Electronic Technician to join our team. This remote, field-based position involves providing technical support, troubleshooting, and repair services across a range of client locations, vendor sites, and other facilities. The role requires an independent, detail-oriented technician with strong communication skills who can deliver high-quality service in diverse environments. Key Responsibilities: 1. Remote Technical Support and Field Service: - Provide on-site technical assistance, including installation, maintenance, and repair of electronic systems and equipment. - Travel frequently to client addresses, vendor facilities, and other off-site locations to address service requests and resolve technical issues. 2. Equipment Troubleshooting and Repairs: - Diagnose and repair faults in electronic systems, including circuit boards, controllers, and integrated systems. - Perform system tests, calibrations, and inspections to ensure optimal functionality and compliance with safety standards. - Replace or repair defective components, ensuring that all repairs meet manufacturer specifications and industry best practices. 3. Installation and Commissioning: - Install new electronic systems and equipment at client sites, ensuring correct setup and integration with existing infrastructure. - Conduct system commissioning, including testing and verification to confirm that installations meet operational requirements. 4. Preventive Maintenance and Upgrades: - Perform regular preventive maintenance on client systems to ensure continued reliability and minimize unplanned downtime. - Recommend and implement system upgrades or modifications to enhance performance and extend equipment lifespan. 5. Client and Vendor Liaison: - Serve as a key point of contact between Voltguard and its clients, providing professional and courteous customer service during all interactions. - Coordinate with vendors and suppliers to facilitate the timely delivery of replacement parts, equipment, and other resources required for repairs. 6. Technical Training and Knowledge Transfer: - Provide clients with detailed instructions and training on operating and maintaining their electronic systems. - Share insights and best practices to enhance client understanding and promote optimal system use. 7. Documentation and Reporting: - Maintain accurate records of all service activities, including repairs, installations, and maintenance visits. - Prepare detailed service reports, including diagnostics, performed work, and recommendations for future actions. 8. Compliance and Safety: - Ensure all work is performed in compliance with industry standards, safety regulations, and Voltguards internal guidelines. - Stay current with industry advancements and best practices, integrating them into day-to-day operations. Required Qualifications: - Proven experience as an Electronic Technician, with expertise in troubleshooting, repairing, and maintaining electronic systems. - Strong knowledge of electronic components, circuitry, and system integration. - Ability to work independently in remote locations with minimal supervision while managing service schedules and priorities. - Excellent problem-solving skills and the ability to analyze and resolve complex technical issues. - Strong communication skills, both verbal and written, to interact effectively with clients, vendors, and internal teams. Preferred Qualifications: - Associate or Bachelors degree in Electronics, Electrical Engineering, or a related field. - Experience with field-based or remote technical service positions. - Familiarity with industry safety standards and protocols. Additional Information: - The position requires frequent travel to various locations, including client sites, vendor addresses, and other remote locations. - Flexibility in scheduling, including occasional weekend or after-hours work, may be necessary to meet client needs. - Voltguard Utilities Limited offers ongoing training, professional development, and opportunities for career growth. Benefits: Voltguard Utilities Limited offers a competitive compensation package, which includes vacation days, sick days, paid holidays, a paid floating holiday of your choice, paid maternity & paternity leave, along with Medical, Dental, Vision, 401K, Optional Life insurance, and opportunities for professional development. We are dedicated to creating an inclusive and collaborative workplace where every team member can thrive. Compensation Information: $23 - 40 per hour + bonus eligible + benefits. Opportunities exist in multiple locations:

Robot Technician WeatherTech Direct is seeking well-qualified Robot Technicians to perform configurations on the robotic systems and troubleshoot errors on the thermoforming machines in the Production department. This is a great opportunity to join our 3rd shift team! High performing, reliable, and teamwork-minded employees are rewarded with a competitive compensation and benefits package including the potential to earn end of year bonuses and pay increases. Starting rate: $24.00/hr. with a 2nd shift premium of $1/hr. and 3rd shift premium of $1.50/hr. As a Robot Technician you will Configure robot systems and perform job calibrations for production operation Monitor robot systems during production and address or report any operational issues Assist in repairs to the robotic systems. Understand the requirements of a properly installed and prepared tool and the impact of errors or improper setup on the robotic process Perform machine cycle and make any necessary robot program modifications Assess and troubleshoot operational errors Read and understand product briefs and process sheets to ensure accuracy in machine set up Operate HMI/MIU to optimize platen heights, install program for robots/robotics lines, and input process numbers for mold changes Understand and efficiently operate robotic pendants, controllers, and panels. Use a tape measure to confirm mold sizes Ensure all equipment is in proper position before removing molds from machine Clean and inspect molds between each use; report any damage to Set Up Lead and Quality Department, send out any damaged molds for repair Install, repair, or replace end of arm tooling for robotic machines Perform assigned preventative maintenance and housekeeping tasks to prevent productivity losses and possible equipment damage Train new and existing team members on different functions of the work area to ensure all are able to perform all tasks properly; share knowledge and best practices to help aid efficiency and productivity Cross train in other areas with similar equipment, and in areas that immediately precede and follow the operations you are responsible for Perform all job functions in compliance with safety guidelines and company policies/procedures Maintain your training and full understanding of the quality requirements of the products your equipment / process produces Keep work area in a clean and orderly condition, clean and maintain equipment Communicate clearly and work as part of a team Work weekends and overtime, as required Set the next shift up for success Perform other duties as assigned Qualifications Previous machine set up experience (preferred) Hold a working knowledge of Plastics and Thermoforming (preferred) Familiarity with mechanical, electrical, hydraulic and pneumatic processes in a manufacturing environment Knowledge of OSHA regulations as they pertain to manufacturing Ability to read, write, and understand verbal and written work orders/instructions in English Possess basic math, measuring, and computer skills (required) A high degree of attention to safety to prevent accidents, injuries, and quality issues Possess experience using basic hand and power tools Be dependable with excellent attendance Be able to work without close supervision in a team environment Authorization work in the United States A high school diploma or equivalent (required) Ability to operate a variety of measuring devices, machines, hand and power tools, manual lifting devices, and powered industrial vehicles Why you'll love working at WeatherTech WeatherTech Direct is proud to offer employees a competitive salary and benefits package, opportunities for internal promotions and skill development, and a clean and safe workspace. Employees are offered an array of perks including: Outstanding BlueCross BlueShield of Illinois medical plans; as well as dental, vision, short and long-term disability, and company-paid life insurance 401(k) plan Paid vacation, holidays, and personal time

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Candidates must be able to communicate effectively via telephone to clients. Repair and service of Company's Analytics (HA) equipment, from initial Quote to final repair / inspection of HA equipment sent in to the US Workshop for repair or calibration. To perform mechanical, electronic, and performance tests on a variety of HA equipment following general procedures and methods. To maintain records for all products Serviced in database (SAP). Individual must be a team player and willing to do other tasks as assigned outside of “Technician” classification. ESSENTIAL DUTIES and RESPONSIBILITIES: Repair and service company's analytic products to support the three lines of business (High Tech, Fixed, and Portables) Perform troubleshooting to component level using electronic tools to include digital voltage meters and other electronic testing tools. (Test fixtures / Software). Perform telephone support to customers and distributors to troubleshoot problems in the field. Maintain Service Reports / Quotations in database (SAP). Maintain Service Database on the HA shared drive to ensure proper customer information. Assist and maintain the refurbishment program. (Reconfigure / Calibrate). Qualifications EDUCATION: Associate Degree of Applied Science in Electronics or Equivalent Military Equivalent to AAS Electronics Degree EXPERIENCE: 2 or more years of experience in electro-mechanical system trouble-shooting to sub-assembly levels. Capable of reading assembly blue prints, wiring schematics, and configuration specifications. Use of specialized test equipment to include oscilloscope, Voltage Meters, etc. Must be able to effectively communicate with customers, distributors, co-workers, and other departments within the company. Must be computer literate (Word, Excel, Outlook) Siebel and SAP experience a plus. Able to lift 40 lbs Good Vision and manual Dexterity Work within a manufacturing facility Additional Information Pay: DOE Monday-Friday: Day Shift 6+ month contract period Must be able to pass a background check.

Mandatory Technical Skills Java/J2EE, EJBs, Spring MVC, Spring boot, Hibernate, Restful services, JMS, Interfacing with Kafka/Elastic search. Expertise in React JS framework to develop the SPA. Experienced in React JS and working with React Flux architecture. Experienced in working with Redux architecture using complex Object-Oriented concepts in improving the performance of the websites. Experience in using React JS components, Forms, Events, Keys, Router, plus Redux, Animations and Flux concept. Good Experience in React.js for creating interactive UI's using One-way data flow, Virtual DOM, JSX, React Native concepts. Familiar with creating Custom Reusable React Components Library. Key responsibilities * Ability to identify, define, create, and apply new architectural design patterns and standards to extremely complex problems. * Ability to understand business requirements and translate them into technical requirements * Understanding of Agile methodologies and Test Driven Development Excellent communication skills is a must * Work with a team that develops smart and scalable solutions and provide a solid experience for our users * Experience with development, deployment, and support of large-scale distributed applications in a mission-critical production environment * Create automated unit tests for both existing code and new projects. TCS Employee Benefits Summary: Discretionary Annual Incentive. Comprehensive Medical Coverage: Medical & Health, Dental & Vision, Disability Planning & Insurance, Pet Insurance Plans. Family Support: Maternal & Parental Leaves. Insurance Options: Auto & Home Insurance, Identity Theft Protection. Convenience & Professional Growth: Commuter Benefits & Certification & Training Reimbursement. Time Off: Vacation, Time Off, Sick Leave & Holidays. Legal & Financial Assistance: Legal Assistance, 401K Plan, Performance Bonus, College Fund, Student Loan Refinancing. Salary Range-$100,000-$130,000 a year #LI-KR3

Electronic Technician I In this job you will be assemble, troubleshoot, connect and test electronic assemblies of basic to moderate complexity As an Electronic Technician I you will: Assemble junction boxes, electronic controls, and other assemblies per mechanical and electrical drawings Install and test completed electronic assemblies Act as an inspector for final electronics checkout Interact with manufacturing to ensure proper installation and test of completed electronic assemblies Participate in wiring diagram / interconnect drawing reviews Troubleshoot electronic assemblies for production and aftermarket support Maintain safe and clean working environment by complying with procedures, rules, and regulations Conserve resources by using equipment and supplies as needed to accomplish job results Contribute to team effort by training others in performance of moderately complex electronic assembly tasks as needed Inspect all work prior to passing it on to the next operation Document actions by completing production and quality forms We are looking for someone who: Is able to safety use small hand and power tools Can read and interpret Drawings and Bills of Material Must have basic computer skills Must have working knowledge of wiring diagrams, interconnect drawings / ladder logic, schematics and Gerber files Is able to bench troubleshoot wiring utilizing available diagrams and drawings and discrete circuits containing relays, diodes, transistors, capacitors, resistors and DC battery chargers utilizing schematics and Gerber files Is knowledgeable in the usage of millimeters and power supplies Must have attention to detail and be able to work independently and follow written procedures Must be able to assist with training of new employees on basic to moderate testing tasks. Has a High School diploma, GED or combination of work experience and skill development Must be able to understand and follow verbal and written instructions in English. Ideally holds an Associate s degree in Electronics Engineering Technology, Electronics or other electronics related discipline, or the equivalent combination of work/military experience and skill development Ideally has 1-2 years in an electronics technician capacity The physical demands of the job are: Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%) Lifting Demands: Lift up to 75 pounds on an occasional basis floor to waist with assistance Lift up to 40 pounds on a frequent basis floor to waist Carry up to 40 pounds on an occasional basis up to 25 feet Push/Pull up to 40 pounds on a frequent basis Push/Pull more than 40 pounds on an occasional basis with assistance Postural Demands: Standing continuous Walking continuous Bending/stooping frequent Squatting/kneeling frequent Lifting frequent Miscellaneous Demands: Griping, manipulation, fingering continuous Variable hand/power tool use frequent Two-person tasks using assistive devices for lifting, pulling and pushing including engine stands hand trucks, pallet jacks, and hoists What we offer you: Pay Range is typically between $20 - $25 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision Insurance Short and Long-Term Disability Life Insurance Health club membership program and reimbursement Employee Assistance Program Tuition Reimbursement 401 (k) Annual Profit Sharing Vacation Air-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: ******************************************* G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Under general direction of the Team Leader(s) the Electronic Technician is responsible for repairing electronic product for manufacturing and field returns. Essential Role Responsibilities: Performs timely and efficient repairs of manufacturing product. Tests control board assemblies utilizing a PC to retrieve various engineering documents including but not limited to: schematics, assembly layouts, test procedures, and work instructions. Completes required supporting documentation for all returns. Sets\-up and operates various electronic test equipment using multi\-meters, oscilloscope, counters, thermo\-couple simulator, etc. Ensures quality control on product line and the adherence to standard operating procedures. Maintains clean and functional work stations, troubleshoot equipment as necessary, and adheres to safety policies and procedures. Promptly notify Team Leader regarding quality trends and issues. Performs other related duties as assigned by Team Leader(s). Requirements Strong organizational, interpersonal, and communication skills Must be self\-motivated, a team player with the ability to work in multi\-task environment Knowledge of production\/quality standards, and assembly procedures\/processes Work well independently, have electro\-mechanical ability\/aptitude, excellent hand and eye coordination Must be able to troubleshoot, interpret electronic schematics, read bill of materials, use test equipment, and in\-circuit testers Knowledge of Microsoft Office (Word, Excel, Outlook), MRP Systems, and QAD (Preferred) Essential Education & Experience: High School Diploma and\/or G.E.D Associates Degree in Electronics or Military Electronics Training 1\-2 years assembly experience of electro\-mechanical products 2\-3 years electronic control repair Food service manufacturing industry (Preferred) Work Conditions & Safety Physical demands and work environment: The physical demands and work environment characteristics listed here are representative of those that must be met by a Team Member to perform the essential functions of this job successfully. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: Ability to sit or stand at assembly work cells for up to 6\-8 hours at time Must be able to lift\/carry\/push\/pull up to 40 pounds Work Conditions are normal for a manufacturing environment The work environment requires the use of safety equipment to include but not limited to: eye safety goggles, steel toe shoes\/boots, and hearing protections Benefits Health Insurance: Comprehensive medical, dental, and vision coverage. Retirement Plans: 401(k) plan with company match to help you plan for your future. Employee Wellness Programs: Access to wellness programs, onsite gym, Employee Assistance Program (EAP) Life Insurance: Basic and supplemental life insurance options. Disability Insurance: Short\- and long\-term disability coverage. Paid Time Off (PTO) "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"667294733","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Work Experience","uitype":2,"value":"1\-3 years"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Carol Stream"},{"field Label":"State\/Province","uitype":1,"value":"Illinois"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"60188"},{"field Label":"Salary","uitype":1,"value":"21.02"}],"header Name":"Electronic Technician","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:18758749","is JobBoard":"false","user Id":"4**********1692017","attach Arr":[],"awli ApiKey":"86ezhi1yg2oktx","custom Template":"3","awli HashKey":"c21b16e3c8dbe9654eb55b1f04069e035f8c6db8eb7bbfaef8f7140a02d1e24836ce4f3bfd6ba2a4417b8e86b4b2319190e2cbcb1a64c1be1235818ca8cd7d86","is CandidateLoginEnabled":true,"job Id":"4**********5587104","FontSize":"12","google IndexUrl":"https:\/\/lucasjamestalent.zohorecruit.com\/recruit\/ViewJob.na?digest=Nyi9VFWIsbMXNaN0qju4E0SogzVi6z0rbmjTY@nJvAY\-&embedsource=Google","location":"Carol Stream","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"pcy573a2da6bcad414975813a806bd9435355"}

Assignment Employee ESSENTIAL JOB RESPONSIBILITIES: Assist engineers to create, modify, and test new and existing products Support product design, development, and manufacturing preparation-ramp, building prototypes, fixtures, and test samples to validate concepts and accelerate rollout Conduct experiments and investigations under the guidance of Engineers Analyze operations and engineering processes and offer suggestions for improvement Use standard tools such as lathes, mills, drills (and related) to build samples or test concepts; leverage test and measurement equipment to validate performance QUALIFICATIONS: Track record of working collaboratively across departments to solve technical / product problems Hands-on, practical product development approach with demonstrated focus on prototyping, sample-development, and testing Strong prioritization, time- management, and self-motivation skills; high energy and focus Strong project management orientation Strong written and verbal communication EDUCATION AND EXPERIENCE: 2-yrs experience as a technician, apprentice, or equivalent in an engineering and/or manufacturing environment Hands-on experience developing and building tools, fixtures, and/or prototype products Experience interpreting and refining engineering drawings Experience with rolling shutters, window treatments, door systems, or windows is a plus Associates degree in Engineering or Manufacturing Technology or equivalent preferred COMPUTER SKILLS: Proficiency with CAD / CAE software Experience with measurement and mechanical testing systems in toolroom and/or protype-lab environments Proficiency with MSOffice COMPENSATION: Base salary commensurate with experience Eligible for Personal Performance Bonus + Company-wide profit sharing Fully paid employee health and basic life insurance 401k- 100% company match up to 10% (after 1 yr.) Paid Vacation

Are you interested in working for a company that makes a difference in people's lives? Do you want to work for a company that values its employees and supports professional development? Joining the Prism Specialties Team Provides: Teamwork: Experience what it is like to work in a team environment surrounded by people who support and encourage you along the way Learning & Development: Develop your skill set within the company by increasing your knowledge and experience in the world of electronics restoration A Day in the Life of a Consumer Electronics Technician: On-site evaluation of damaged electronics from insurance claims involving fire, water, or lightning strike damage Inventory, remove and transport electronic items and appliances from the insured's home or business Disassemble and evaluate electronic items to be cleaned, serviced, and/or repaired Test, clean, restore, and reassemble electronic items to pre-loss condition Deliver and reinstall appliances and consumer electronic items within the insured home or business What We are Looking for in You: Excellent customer service skills; provide "white glove" service for our clients Solid multi-tasking ability, prioritizing skills, and attention to details Consistently exhibit empathy and compassion Comfortable working on-site in post-peril (fire, floods, etc.) environments Ability to lift and carry 75 pounds during pick-up and delivery activities Prism Specialties specializes in the restoration of electronics, art, textiles, and documents for residential and commercial insurance claims. Compensation: $17.00 - $22.00 per hour For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Prism Specialties Corporate.

Work experience in the following areas is desired: Assembly/disassembly work and experience with hand tools Read drawings, follow written assembly procedures (including data-entry of completed tasks of those procedures) Use a PC with MS Word & Excel Grinding, cutting, soldering and lifting of up to 40lbs may be required Must be able to work with epoxies, solvents, glues and other chemicals Have a minimum high school diploma or GED equivalent is required

The Automation Technician is responsible for monitoring and operating automated systems and machinery within a production environment. They ensure that all equipment functions correctly, perform basic troubleshooting, and make adjustments as necessary to maintain production quality and efficiency. The Automation Technician plays a key role in ensuring the smooth operation of automated processes. Requirements Key Responsibilities Operation of Automated Systems * Start up, monitor, and shut down automated equipment in accordance with established procedures. * Adjust machine settings to achieve the desired production output and product quality. * Operate control systems, such as PLCs (Programmable Logic Controllers) and HMIs (Human-Machine Interfaces), to control automated processes. Monitoring and Troubleshooting * Continuously monitor the performance of automated machinery, identifying and addressing any issues that arise. * Perform basic troubleshooting and make minor repairs or adjustments to resolve equipment malfunctions. * Notify maintenance technicians or engineers of any significant issues that require more advanced troubleshooting or repairs. Quality Control * Conduct routine checks and inspections of products coming off the automated line to ensure they meet quality standards. * Make adjustments to processes or equipment as needed to maintain quality and consistency. * Record and report any deviations from quality standards. Documentation and Reporting * Maintain accurate records of production outputs, machine settings, and any issues encountered during operation. * Complete daily production logs and other required documentation. * Report production data and machine performance to supervisors or engineers. Safety and Compliance * Follow all safety protocols and ensure that automated equipment is operated in a safe manner. * Conduct safety checks on equipment and report any hazards or potential risks. * Comply with company policies and regulatory requirements related to production and safety. Collaboration and Communication * Work closely with maintenance technicians, engineers, and other operators to ensure the smooth operation of automated systems. * Provide feedback on equipment performance and suggest improvements to enhance productivity or quality. * Communicate effectively with team members and supervisors regarding production status and any issues. Skills and Qualifications Technical Skills * Basic understanding of automated systems, including PLCs, robotics, and sensors. Fanuc, Epson systems preferred * Ability to read and interpret machine settings, production instructions, and control panels. * Basic troubleshooting skills for addressing minor equipment malfunctions. Problem-Solving Skills * Ability to quickly identify and resolve issues that arise during operation. * Attention to detail to ensure quality standards are met and maintained. Physical Requirements * Ability to stand for long periods and perform repetitive tasks. * Ability to work in an industrial environment, which may include exposure to noise, dust, and varying temperatures. Communication and Collaboration * Strong communication skills for reporting issues and collaborating with other team members. * Ability to follow instructions and work as part of a team. Education and Experience * High school diploma or equivalent is typically required. * Additional technical training or certification in automation, manufacturing, or a related field is beneficial. * 1-3 years of experience in a manufacturing or production environment, particularly in operating automated equipment. * Familiarity with automation systems and controls is a plus. Work Environment * The Automation Operator works in a manufacturing or industrial setting, often on a production floor with machinery and automated systems. The role may require shift work, including nights and weekends, depending on the production schedule.

Summary/objective The Engineering Technician will support the CPS Engineering in design, development, and manufacturing of medical devices. Support New Product Development (NPD), New Product Introduction (NPI), and manufacturing support of CPS products and services. Looking for candidates with AutoCAD & Solid works expertise. Essential functions Proficiency in AutoCAD & Solidworks is required Help develop new manufacturing processes as required. Assist engineers in design and assembly of fixtures and equipment. Assist engineers with drawings, change requests, and engineering prototypes. Assist engineers with BOMs, routers, and other documents. Execute engineering protocols and run engineering experiments. Compile proper information and create Operating Procedures. Produce and inspect products at an acceptable quality level. Draft simple protocols based on templates as assigned by engineers. Follow existing Test Methods for various types of testing. Develop Test Methods for new tests, as required. Maintain orderly and safe working conditions as well as perform all duties in accordance with established procedures and good manufacturing procedures. Able to establish good working relationships with all levels of operations. Complete other related tasks as assigned by engineers. Competencies Good knowledge of basic assembly tools like wrenches, pliers, cutters, cordless tools and bits. Able to read basic engineering drawings and interpret technical instructions. Proficient in Microsoft Word and Excel as well as editing drawings in AutoCAD and Solid Works. Function successfully in a high-paced, results-oriented environment Communicate in at least High School level English (Read, Write, Speak). Understand scientific units and measures as well as perform basic mathematical calculations.. Supervisory responsibilities N/A Required education and experience High school diploma or equivalent. No previous experience required. Preferred Education and experience Bachelor's degree in manufacturing or engineering. 2-5 years' experience in a medical device manufacturing environment preferred. Manufacturing of needle products experience is a plus. Physical demands & Travel required No travel required Light

AIM Inc. (Automated Industrial Machinery Inc) manufactures 2 and 3 dimensional CNC wire bending machinery. The company is an active machinery exporter via its two manufacturing facilities in North America and Europe. Founded in 1992 by Constantine Grapsas, AIM Inc. has grown to become the premier CNC bending machine supplier serving customers worldwide. The modular machine construction technique AIM Inc. employs provides unprecedented machine upgrade flexibility and versatility. 2D machines are able to manufacture rectangular frames as large as 72” (1828mm) by simply changing frame modules. Both 2D and 3D machines can expand to accommodate accessory machine modules. These include chamfering, butt welding, end forming, drilling, marking, threading, and press operations. Many of these modules are offered in-line, allowing for turn-key end product manufacturing. The newest machine lines include the value oriented AccuForm Compact, resetting the bar for entry level, automated CNC wire bending machines and the AccuForm “Rebar”, a dedicated rebar CNC bending machine, with world class strength and robustness, yet employing AIM's exclusive SmartEditor™ easy to use machine controller environment. Continuing the quest to provide finish customer solutions, AIM Inc. provides total turn-key integration in partnership with Fanuc Robotics. AIM Inc. has installed complete systems, integrating the AIM Inc. bending machines with Fanuc Robotics articulated robots for complete lights out operation, allowing the customer to achieve new lean manufacturing capabilities. With technical sales representatives throughout North America, Europe, and in strategic locations throughout the globe, AIM supplies the world with wire and rebar manufacturing automation solutions. AIM has made significant installations in Asia, Australia, and South America. Mission Statement - “Total Customer Satisfaction” AIM Inc.'s mission is to provide total customer satisfaction by serving the manufacturing industry honorably and providing products and services of superior quality and at a fair price. AIM Inc. consistently puts customer interest first and continually improves its products, offering the best value CNC bending machinery solutions. Job Description The purpose of the Engineering Technician is to setup new machinery and to provide support for customers through training, product development, and troubleshooting. Key Responsibilities - Setup and troubleshooting of both new and existing machinery and work cells - Program CNC equipment to produce customer samples and/or acceptance parts - Train customers on proper operation, programming, and maintenance of equipment both in house and onsite - Provide feedback for production and engineering teams when problems occur and follow through the process for improvement - Conducts quality assurance tests on new machinery - Create and maintain documentation for new and existing machinery - Assist in the development of new products and industrial automation solutions Key Skills - Strong analytical problem solving and technical skills including mechanical, electrical and programming - Strong oral & written communications and teamwork-Ability to read electrical, mechanical, hydraulic, and pneumatic schematics - Proficiency with MS Outlook, Word, Excel-Working knowledge of motion controls systems a plus - Experience programming robots (Fanuc preferred) a plus - Ability to work independently and think creativity Benefits - Medical, dental, and vision coverage - Simple IRA savings - Life insurance-Vacation, holiday and personal time in a simple P.T.O. Plan (Paid Time Off) - Training and Development-Career advancement Job Type: Full-time Salary: $40,000.00 to $65,000.00 /year Required education: Associate Required experience: Programming: 1 year Required language: English Required license or certification: Driver's License Qualifications - Degree,significant coursework/certifications, or Experience in Electrical, Mechanical, Industrial Engineering or Maintenance-1-3+ Years' Experience Programming, Troubleshooting, or Operating Machinery - Ability to travel up to 25% - Valid Driver's License Additional Information All your information will be kept confidential according to EEO guidelines.

We are is a disaster restoration company specializing in the restoration of both consumer electronics and appliances. We calmly and professionally guide our clients through the protection and restoration of their most precious and important possessions! We have an opening for an Electronics Technician to join our fast-paced, team-oriented environment. The Electronics Technician will perform restoration on many varying electronics and appliances. Along with the restoration process, each tech will be certified to drive the box truck by taking the DOT physical so that they can do the pickup and delivery of electronics and appliances as well. Primary Responsibilities Include: On-site evaluation of damaged electronics from insurance claims involving fire, water, or lightning strike damage. Inventory, remove and transport electronics and appliances from the insured's home/business. Disassemble and evaluate electronics to be cleaned, serviced, and/or repaired. Test, clean, restore, and re-assemble electronics to pre-loss condition. Deliver and reinstall appliances and consumer electronics within the insured home or business. Requirements Include: Able to interact in a positive and empathetic manner with customers within their own homes. Treats customer's property, homes and workplaces with great care. High School Diploma or equivalent required, Associate's Degree or higher is a plus. Valid driver's license with a satisfactory driving record. Safely drive company vehicles to the job site. Able to work efficiently and effectively in a team environment. Exhibit a professional, neat, and clean appearance. Good verbal and written communication skills. Working knowledge of basic PC and iPad operations. Strengths in multi-tasking and prioritizing. Attention to detail and accuracy. Willingness and ability to work in the difficult conditions of a damaged home or business. Ability to complete work that is sometimes physically demanding including the ability to lift up to 75 pounds. Successfully complete a pre-employment drug screen and criminal background check. Pass the DOT physical. Benefits Paid vacation and holidays Personal/sick days Health insurance Compensation: $17.00 - $22.00 per hour For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Prism Specialties Corporate.