Electronics technician jobs in Hillsboro, OR

Perform testing, check-out, and troubleshooting using schematics, diagrams, descriptions, layouts, or defined plans. Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems. Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures. Conduct operational test and fault isolation on systems and equipment, help in determining methods or actions to remedy malfunctions. Support the design, construction, test, and check-out of test equipment. Use test and diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus. Collaborates with development engineers conducting engineering tests to collect design data or support in research efforts. 2-4 years of related work experience. Firsthand experience with installation, maintenance, repair, testing, or troubleshooting of equipment or electronics. Effective communication skills, written and verbal, in English. Proficient in utilizing computer-based data systems, applications, and Microsoft Office software. Ability to work a shift schedule. Associates degree, Technical Certificate, Diploma or higher in a technical field. Experience in electrical engineering, mechanical engineering, bioengineering, metrology, lab operations, or related areas. Experience in semiconductor experience is a plus.

Job Title: Instrumentation Technician Instructor We are seeking a skilled and experienced Instrumentation Technician Instructor to join our training team. The ideal candidate will have a strong background in instrumentation and control systems, along with a passion for teaching and guiding the next generation of technicians. As an instructor, you will deliver hands-on and theoretical training, helping students develop the skills needed to succeed in the industry. Key Responsibilities: - Deliver instruction in instrumentation technology, including control systems, calibration, troubleshooting, and maintenance. - Guide students through hands-on training with industry-standard tools such as Emerson, Fluke, and HART communicators for configuration, calibration, and troubleshooting. - Prepare and organize instructional materials, lab activities, and assessments that align with industry standards. - Foster a positive, interactive classroom environment that encourages participation and skill development. - Assess student progress and provide constructive feedback to help them achieve their learning goals. - Maintain a safe and organized workshop environment, ensuring equipment is in working order and safety protocols are followed. Qualifications: - 5+ years of hands-on experience as an Instrumentation Technician, with expertise in installation, calibration, troubleshooting, and maintenance of instrumentation and control systems. - An associate degree or certification in Instrumentation Technology, Electrical Engineering, or a related field. - Strong working knowledge of industry-standard tools, including Emerson, Fluke, and HART communicators. - Excellent communication and interpersonal skills, with the ability to simplify complex concepts for students. - Prior teaching or training experience is a plus but not required; a passion for mentoring and developing others is essential. Compensation and Schedule: This is a part-time position offering $40 per hour, with classes held during nights and weekends. Application Instructions: If you are passionate about instrumentation and want to share your expertise with aspiring technicians, we encourage you to apply. Please submit your resume, cover letter, and references detailing your relevant experience and qualifications.

Legacy Talent Search is currently seeking candidates for a Production Engineering Technician role in Forest Grove, OR. Our client is a well-established industry leader recognized for innovation, technical excellence, and a commitment to continuous improvement. They pride themselves on maintaining high standards across all stages of their engineering and manufacturing processes. This is an excellent opportunity for a hands-on technical professional who thrives in a problem-solving, design-focused environment. Key Responsibilities: · Analyze product and equipment specifications to determine designs compatible with existing manufacturing capabilities. · Evaluate feasibility for new equipment designs or modifications based on cost, space, timelines, and technical requirements. · Provide technical information related to manufacturing methods, materials, properties, and process limitations to support long-range planning. · Collaborate with research teams to resolve design challenges and refine engineering concepts. · Prepare or oversee the creation of detailed product layouts, drawings, schematics, and system designs. · Direct and coordinate the manufacturing or construction of prototype products or systems. · Compile and analyze operational, test, and research data to develop performance standards for new or modified products. · Plan, execute, and oversee experimental test programs. · Review test reports and data to determine whether designs meet required performance and functional specifications. · Work with cross-functional engineering personnel to develop design modifications as needed. · Evaluate engineering test outcomes for potential application to new product development or system enhancements. · Adhere to established standards, procedures, and applicable laws while continuously updating job knowledge. · Perform other related duties as assigned. Qualifications: · Associate's degree from a two-year college or technical school; or 6 months to 1 year of related experience and/or training; or an equivalent combination of education and experience. · Proven experience in design, fabrication, manufacturing, and customer/supplier relations. · Advanced computer proficiency, including CAD software and Microsoft Office. · CAD and 3D drawing experience are preferred but not required. · Ability to read, interpret, and analyze electrical/technical specifications, financial reports, and design documentation. · Strong communication skills with the ability to respond to inquiries from customers, regulatory agencies, and internal teams. · Confidence presenting technical information to management and administrative personnel. · Strong mathematical abilities, including geometry, trigonometry, and practical application of ratios and percentages. · Demonstrated ability to solve practical problems and work with variables in situations where limited standardization exists. · Ability to interpret written, oral, diagram, and schedule-based instructions. · Excellent organization skills with high attention to detail and accuracy. · Strong interpersonal communication skills, both written and verbal. · Ability to multi-task, work under pressure, and meet deadlines. Physical Demands: · Regularly required to sit, use hands for fine motor tasks, and communicate clearly. · Frequently required to reach with hands and arms. · Occasionally required to stand, walk, climb, balance, stoop, kneel, crouch, or crawl. · Must be able to lift and/or move up to 25+ lbs. · Vision requirements include close vision, distance vision, depth perception, and the ability to adjust focus. Work Environment: · May be exposed to moving mechanical parts. · Noise level is typically quiet. What We Offer: · Competitive compensation package. $25-$35 DOE. · Comprehensive benefits, including health insurance and paid time off. · Opportunities for career growth and skill development. · A supportive, innovative, and inclusive workplace culture. · The chance to contribute to a company that values excellence, continuous improvement, and community impact. At Legacy Talent Search, we are more than just a staffing agency-we are dedicated to supporting the growth of the American economy and way of life, one job at a time. Focused on rebranding the staffing industry, we work tirelessly to demonstrate how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Electronic Restoration Services (ERS) is a disaster restoration company specializing in the restoration of both consumer electronics and appliances. The Appliance and Consumer Electronics Technician will perform restoration on many varying electronics and appliances. Along with the restoration process, each tech will be certified to drive the box truck by taking the DOT physical so that they can do the pickup and delivery of electronics and appliances as well. Primary Responsibilities Include: (These are intended only as illustrations of the various types of work performed. The omission of specific duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position.) On-site evaluation of damaged electronics from insurance claims involving fire, water, or lightning strike damage. Inventory, remove and transport electronics and appliances from the insured's home/business. Disassemble and evaluate electronics to be cleaned, serviced, and/or repaired. Test, clean, restore, and re-assemble electronics to pre-loss condition. Deliver and reinstall appliances and consumer electronics within the insured home or business. Able to travel for up to two weeks for corporate training if needed. Comfortable being on-call for immediate deployment to job site nights or weekends. Requirements Include: Fantastic customer service skills. Able to interact one-on-one with the customer by within their own homes. Capable of de-escalating tense situations with customers. High School Diploma or equivalent. Associate's Degree or higher is a plus. Valid driver's license with a satisfactory driving record. Safely drive company vehicles to the job site. Able to work efficiently and effectively in a team environment. Exhibit a professional, neat, and clean appearance. Exceptional verbal and written communication skills. Working knowledge of basic PC and iPad operations. Strengths in multi-tasking and prioritizing. Attention to detail and accuracy. Ability to lift up to 75 pounds. Successfully complete a pre-employment drug screen and criminal background check. Pass the DOT physical. Additional Responsibilities of an ERS Appliance and Electronics Technician Consist of the Following: Report to work at scheduled times. Be available for non-scheduled work requirements as needed including nights, weekends, and holidays. Maintain appearance and demeanor representative of the ERS image. Cooperate with direct supervision and perform duties assigned by supervisors. Cooperate with other service technicians and perform duties assigned. Inspect own work and ensure that it is complete, thorough, and will pass ERS quality standards. Report all injuries immediately. Injured workers requiring more than first aid treatment must immediately be seen by a physician/clinic. Attend and participate in all staff meetings as requested. Abide by all rules, regulations, and policies contained in the Employee Handbook, Safety Manual, and Employment Agreement including active participation in identifying, reporting, and correcting situations affecting safety, quality, and customer satisfaction. Properly use and maintain the ERS vehicle in accordance with the manufacturer's recommendations and ERS procedures. Use and maintain all provided materials, supplies, and equipment in accordance with the manufacturer's recommended procedures. Report all deficiencies or unusual characteristics of the ERS vehicle or equipment on the appropriate ERS form. Document all job activity using the proper forms and by filling them out completely and legibly. Keep job or customer files neat, organized, and secure and keep its contents confidential. Sign Service Technician's schedule or Time Card (daily or weekly). Participate in ongoing training programs sponsored by the company and/or affiliated organizations and able to travel for the initial training program. Demonstrate competency in the knowledge and skills required for position by successfully passing exams needed to obtain trade-specific certifications. Fulfill all service technician essential functions. Fulfill all other duties and responsibilities assigned by the company. For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Prism Specialties Corporate.

Artech Information Systems is the #12 Largest IT Staffing Company in the U.S. and an employer of choice for over 7,000 consultants. We recruit world-class talent for IT, engineering, and other professional jobs at 70+ Fortune and Global 500 companies coast-to-coast across the U.S., India, and China. We are one of the fastest-growing companies in the US and we welcome you to search the thousands of jobs in our cutting-edge GEM system for employment opportunities that fit your qualifications. At the forefront of the staffing industry, Artech is a minority and women-owned business enterprise (MWBE) committed to maximizing global workforce solutions on behalf of its clients. Artech's deep heritage, proven expertise and insightful market intelligence has secured long-term partnerships with Fortune 500 and government clients seeking world-class professional resources. Job Description Primary PurposeUnder close supervision, performs basic functions requiring technical knowledge utilizing electronic applications, processes, standards and document control processes/procedures.Principal Duties and ResponsibilitiesEngineering Standards: Continues to learn and apply standards, systems, document control, departmental guides and B&V policies and procedures. Quality / Continuous Improvement: Ensures that deliverables are accurate and compliant by continually developing knowledge of the B&V Quality Program. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Engineering Production: Broadens knowledge of the applications required to modify and develop less complex deliverables based on a variety of design inputs. May assist with minor computations such as material quantity estimates and dimensional checks. Project Coordination: May assist in coordinating deliverables with other groups involved on the same project to minimize interference or errors. Client Focus: Focuses on the needs of internal clients while attempting to gain basic understanding of external client's main interests and drivers. Knowledge Sharing, Innovation and Technology: Proactively seeks and shares knowledge of latest technologies and processes.Minimum QualificationsAssociate Degree in Drafting or an Engineering Design Related Technology preferred. GCSC (Draft generic educational equivalent required. Minimum of 1 year related work experience.Preferred Job Qualifications1 year of experience required. Proficiency with Bentley Microstation required (**THE CANDIDATE WILL BE TESTED ON THIS**) Experience with AutoCAD and/or PLS-CADD are a plus but not a requirement. Diploma or Certificate preferred. Non-Technical: Learning on the Fly, Problem Solving, Perseverance, Patience, Time Management, Drive for Results, Self Development, Customer Focus, Listening,Informing. Technical: Intermediate knowledge of Computer Automation Additional Information For More Information, Please Contact Subh ************

Overview At MasTec Communications Group we build for the future. Yours and ours. As a Radio Technician III, you will develop new skills, work in a safety-minded environment, and join us in expanding technology for a better community. Join the MasTec family and help us provide the highest level of quality service to our customers and communities while maintaining our commitment to safety! Responsibilities As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport Qualifications About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers #HotJobs About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers #HotJobs As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport

Following all safety procedures and expectations when working on equipment in the clean room. Adhering to all clean room protocols and procedures. Performing preventative maintenance and repairs on factory equipment within their assigned area. Maintaining a clean work area before, during, and after repair and maintenance work. Employing strong attention to detail, including documentation of actions and observation regarding the equipment. Troubleshooting equipment problems to their root cause. Communicating findings to their peers and engineers. Making recommendations to improve practices within their area of the factory. Employ basic statistical process control concepts to troubleshoot and monitor the health of equipment in their area. Troubleshooting to the component level when necessary.

Job Description AGC Electronics America Engineering Technician Who We Are AGC Electronics America (AGCEA) manufactures high-purity Silicon Carbide (SiC) Ceramics materials and CMP Slurries for the semiconductor industry. We also serve as a distributor for other AGC Electronics Materials manufactured in Japan and elsewhere. We are headquartered in Hillsboro, Oregon, USA, and are a division of AGC Flat Glass North America. What We Offer Shift 10:00 AM - 6:30 PM $24.50 - $30.00 per hour Full benefits package that includes but is not limited to: Medical, Dental and Vision Insurance New employees are eligible for benefits on the 1st of the month following 30 days of hire. Employer contribution into HSA account. 401k with a 4% company match. Up to 120 hours of Paid Time Off. Up to 40 hours of Paid Sick Time Off. Up to 12 Paid Holidays per year. About The Role Required Qualifications: High school diploma or GED equivalent 0 to 2 years of relevant experience or combination of education and experience in a manufacturing environment Proven ability to follow detailed directions Basic ability to organize and perform tests on systems or products with a high level of direction Beginner level ability to record detailed observations and maintain records. Basic mechanical aptitude for equipment, measurement devices, mechanical alignment and instrumentation. Basic ability to communicate in technical terms for the status of tasks, testing, equipment, issues, risks and reporting to Engineering or Management. Able to effectively communicate in English (written and verbal) with all relevant stakeholders in various departments including maintenance, operations, engineering, etc. Able to work independently and safely in a manufacturing environment and perform assigned duties in accordance with all safety and environmental requirements. Able to communicate technical results and actions to operations team members. Proficient in Microsoft Office Applications. Physical ability to perform the essential job functions Preferred Qualifications: Associate's degree in engineering technology or an Engineering Technician Certification. Experience with the statistical analysis of test data using Excel or other statistical software. Experience with SolidWorks and/or AutoCAD modeling. Basic knowledge of GD&T and how it pertains to a component or assembly. Ability to take initiative to investigate root cause of deviations or non-compliance. Able to perform work on assigned tasks with some level of independence and self-direction and able to discern when additional support is needed. Prior experience with GR&R testing and qualifications. Responsibilities: Able to modify and make use of systems and equipment in support of the engineering team. Supports the installation of new systems or equipment. Verifies the maintenance of installed systems and equipment. Able to understand blueprints and schematics to correctly install a system of pieces of equipment. Able to update methods of tests under the guidance of engineers. Able to effectively document engineering systems for engineers or management under the guidance of engineers. Monitor system statistical process control (SPC) output, with emphasis on returning to control parameters, creating response flow checklist (RFC) as needed for repeat occurrences. Able to investigate root cause of deviations for conformance. Able to measure items using a wide variety of measurement tools consistently and reliably such as hand tools, programmed tools, and scanner systems. Perform or oversee gage repeatability and reproducibility (GRR) tests and qualifications.

AGC Electronics America Engineering Technician Who We Are AGC Electronics America (AGCEA) manufactures high-purity Silicon Carbide (SiC) Ceramics materials and CMP Slurries for the semiconductor industry. We also serve as a distributor for other AGC Electronics Materials manufactured in Japan and elsewhere. We are headquartered in Hillsboro, Oregon, USA, and are a division of AGC Flat Glass North America. What We Offer Shift 10:00 AM - 6:30 PM $24.50 - $30.00 per hour Full benefits package that includes but is not limited to: Medical, Dental and Vision Insurance New employees are eligible for benefits on the 1 st of the month following 30 days of hire. Employer contribution into HSA account. 401k with a 4% company match. Up to 120 hours of Paid Time Off. Up to 40 hours of Paid Sick Time Off. Up to 12 Paid Holidays per year. About The Role Required Qualifications: High school diploma or GED equivalent 0 to 2 years of relevant experience or combination of education and experience in a manufacturing environment Proven ability to follow detailed directions Basic ability to organize and perform tests on systems or products with a high level of direction Beginner level ability to record detailed observations and maintain records. Basic mechanical aptitude for equipment, measurement devices, mechanical alignment and instrumentation. Basic ability to communicate in technical terms for the status of tasks, testing, equipment, issues, risks and reporting to Engineering or Management. Able to effectively communicate in English (written and verbal) with all relevant stakeholders in various departments including maintenance, operations, engineering, etc. Able to work independently and safely in a manufacturing environment and perform assigned duties in accordance with all safety and environmental requirements. Able to communicate technical results and actions to operations team members. Proficient in Microsoft Office Applications. Physical ability to perform the essential job functions Preferred Qualifications: Associate's degree in engineering technology or an Engineering Technician Certification. Experience with the statistical analysis of test data using Excel or other statistical software. Experience with SolidWorks and/or AutoCAD modeling. Basic knowledge of GD&T and how it pertains to a component or assembly. Ability to take initiative to investigate root cause of deviations or non-compliance. Able to perform work on assigned tasks with some level of independence and self-direction and able to discern when additional support is needed. Prior experience with GR&R testing and qualifications. Responsibilities: Able to modify and make use of systems and equipment in support of the engineering team. Supports the installation of new systems or equipment. Verifies the maintenance of installed systems and equipment. Able to understand blueprints and schematics to correctly install a system of pieces of equipment. Able to update methods of tests under the guidance of engineers. Able to effectively document engineering systems for engineers or management under the guidance of engineers. Monitor system statistical process control (SPC) output, with emphasis on returning to control parameters, creating response flow checklist (RFC) as needed for repeat occurrences. Able to investigate root cause of deviations for conformance. Able to measure items using a wide variety of measurement tools consistently and reliably such as hand tools, programmed tools, and scanner systems. Perform or oversee gage repeatability and reproducibility (GRR) tests and qualifications.

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications 2nd Shift/3rd SHIFT (3pm-11pm,11pm-7am) FIRST SHIFT 1st Shift; 7AM-3PM Electronic Technician needs 2+ years of experience as an Mechanical / Electronic Technician Electronic Technician requires: Work experience preferably in a prototype build process environment. Technicians should be able to work either sitting or standing, performing complex repetitive tasks over the course of an 8 hour shift. Fine motor skills and good hand dexterity are critical to performing the tasks associated with the positions. Electronic Technician duties: operate complex process equipment, must be able to work in Clean room environments. Technicians will be building prototype assemblies and working with engineers on newly developed process equipment to assist in process development, debug of equipment, and process debug. Work with engineers assisting with project work Provide database reports/queries routinely Additional Information $19hr 6 MONTHS

The Hardware Engineering Technician IV will be part of an engineering team developing power management hardware in Nickel-Zinc (NiZn) battery backup systems for multiple industries. They will be responsible for performing electrical and mechanical tests on engineering prototypes and preproduction units under the guidance of Engineers and Project managers. The selected candidate will also be supporting the development of electrical architecture and design, integration and debugging of new electrical hardware and firmware, and validation of the design in a structured engineering environment. This role will work on-site at ZincFive HQ in Tualatin, Oregon and will report to the Technical Engineering Manager. Hardware Engineering Technician IV Job Duties: Assemble prototypes of battery packs, Battery Management Systems (BMSs) and Uninterruptable Power Supply (UPS) systems Create and assemble test fixtures Modify circuits as directed by the engineers Provide feedback during the prototype assembly process, calling out manufacturability issues early in the design process. Set up and operate test equipment to evaluate performance of prototype parts, assemblies, or systems under simulated operating conditions and record results Test and monitor the performance of electrical circuits as designed by engineers Help with electrical schematic capture and Bill of Materials (BOM) maintenance Setup and perform reliability tests on various key system components. Participate in failure root cause analysis and support the corrective actions implementation Perform hardware and software design verification and validation testing Job Requirements: Associate's degree in applied science, Electronics 4+ years of experience Aptitude in the use of hand tools for mechanical assembly, electrical soldering, and wiring Experience in prototype assembly, testing and documentation Experience reading electrical schematics and mechanical drawings Experience with Oscilloscopes, Digital Multi Meters (DMMs), Power Analyzers, Signal Generators etc. Familiarity with Altium or similar schematic capture program Experience working in an engineering test Lab and product development environment Experience building fixtures for test setups Experience using data acquisition systems (DAQs) Experience working with thermal chambers Experience programming and debugging systems with microcontrollers Proficient in MS Office 365 tools Preferred Skills: Experience with Power Electronics Experience with Battery Management Systems (BMS) Experience with Printed Circuit Board layout Experience with Basic 3D modeling (SolidWorks CAD) Experience running additive manufacturing equipment (FDM 3D Printer) Key Competencies: Attention to detail Integrity Data collection and analysis Problem-Solving Results Orientation Sound engineering/scientific judgment Teamwork The ability to assess and initiate things independently Excellent verbal and written communication skills Physical Requirements and working conditions: Work involves sitting, walking, standing, bending, stooping, and lifting to 40 pounds Requires close visual acuity and the ability to distinguish color Office, warehouse, and lab environments Requires the ability to wear PPE when necessary, on the face and body Salary offers will depend on factors that include the location you work from, your level, education, training, specific skills, years of experience and comparison to other employees already in this role. In addition, the successful candidate for this position will become eligible for a comprehensive set of outstanding benefits, including medical, dental, vision, life insurance, 401k, paid sick time, paid time off for vacation, paid holidays, paid community service days, professional/personal learning program, and applicable state/federal paid family leave. ZincFive is committed to employing a diverse workforce. As an Equal Opportunity and Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status. We maintain a safe workplace and perform pre-employment testing. ZincFive is a participant in E-Verify and receives employment authorization of new hires through Social Security and the Department of Homeland Security databases.

Description Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). Work closely with a cross-functional engineering team to develop next-generation industrial fiber laser components and systems. The successful candidate will: Conduct initial proof-of-concept experiments Build and characterize prototypes Develop and document processes and tooling Assist in transferring products to manufacturing, including training of operators Maintain equipment, organize materials and supplies, and ensure safe operation of development labs Troubleshoot problems in the development lab and the factory Desired Qualifications: Associates Degree or higher in lasers, optics, electronics, or another engineering discipline, or equivalent experience in related technologies Experience with high power lasers, optics, and fibers Experience with tools and equipment for fiber processing and inspection Experience supporting engineers working with lasers, fiber optics, electro-optic or opto-mechanical devices, or electronics Meticulous attention to detail, highly organized, self-motivated Experience with electronics and test equipment, including oscilloscopes, digital multimeters, power meters, CCD cameras or beam profilers, spectrum analyzers, etc. Good written and verbal communication skills Demonstrated problem-solving skills Familiarity with mechanical drawings and basic tooling Experience with Excel and data-analysis software Training or experience in Six Sigma, Lean Manufacturing, Statistical Process Control, and Design of Experiments nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting level and pay depends on qualifications: Engineering Technician I: $23.41 - $29.30 per hour Engineering Technician II: $25.49 - $33.10 per hour Other Compensation and Benefits Target Cash Bonus with potential payout of up to 2% of earned wages 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays Eligible for health benefits on the 1st day of the month after your start date Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance Employee Assistance Program Aflac Supplemental Insurance Flexible Spending and Health Savings Accounts Employee Stock Purchase Plan 401(k) with company match and immediate vesting Jury Duty and Bereavement Leave Pay Tuition Assistance Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or [email protected].E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: E-Verify Participation Poster Right to Work Poster

About Analog Devices Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at ************** and on LinkedIn and Twitter (X). Overview: We are seeking a skilled Mechatronics Technician to join our dynamic team. The ideal candidate will be proficient in designing, building, and maintaining machines and systems. You will apply your skills in mechanical engineering, electronics, computer programming, control engineering, and systems design to ensure system stability and efficiency, contributing to the growth and overall success of our business. Responsibilities: * Design, develop, maintain, and manage high-technology engineering systems for the automation of semiconductor FAB. * Apply mechatronic or automated solutions to the transfer of materials, components, or finished goods. * Create mechanical design documents for parts, assemblies, or finished products. * Maintain technical project files. * Conduct studies to determine the feasibility, costs, or performance benefits of new mechatronic equipment. * Research, select, or apply sensors, communication technologies, or control devices for motion control, position sensing, pressure sensing, or electronic communication. * Identify and select materials appropriate for mechatronic system designs. * Install and maintain mechanical control systems. * Troubleshoot equipment malfunctions. Preferred Qualifications: * Proven experience as a Mechatronics Technician or similar role. * Familiarity with mechanical, electrical, and computer systems. * Excellent manual dexterity. * Familiar with PLCs, IPCs and other control systems * Exposure to C++, C, Python, Java etc. * Ability to read and comprehend technical documentation. * Excellent problem-solving and troubleshooting skills. * Knowledge of safety protocols and willingness to enforce these. * Strong attention to detail. * Experience with semiconductor process equipment * Associate degree in mechatronics, automation engineering, or a related field, or US Military Veteran with applicable technical experience Location: Beaverton, Oregon Work Schedule: Compressed workweek (3 12-hr shifts one week, 4 12-hr shifts alternate week) , hourly employee For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: Experienced Required Travel: No Shift Type: COP (Continuous Opns.) The expected wage range for a new hire into this position is $28 to $35. * Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors. * This position qualifies for a discretionary performance-based bonus which is based on personal and company factors. * This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.

Perform testing, check-out, and troubleshooting using schematics, diagrams, descriptions, layouts, or defined plans. Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems. Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures. May conduct operational test and fault isolation on systems and equipment, help in determining methods to remedy malfunctions. Support the design, construction, test, and check-out of test equipment. Use test and diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus. Collaborates with development engineers. conducting engineering tests to collect design data or support research efforts. 1-2 years of related work experience. Firsthand experience with installation, maintenance, repair, testing, or troubleshooting of equipment or electronics. Effective communication skills, written and verbal, in English. Proficient in utilizing computer-based data systems, applications, and Microsoft Office software. Ability to work a shift schedule. Associates degree, Technical Certificate, Diploma or higher in a technical field. Experience in electrical engineering, mechanical engineering, bioengineering, metrology, lab operations, or related areas. Experience in semiconductor experience is a plus.

Artech Information Systems is the #12 Largest IT Staffing Company in the U.S. and an employer of choice for over 7,000 consultants. We recruit world-class talent for IT, engineering, and other professional jobs at 70+ Fortune and Global 500 companies coast-to-coast across the U.S., India, and China. We are one of the fastest-growing companies in the US and we welcome you to search the thousands of jobs in our cutting-edge GEM system for employment opportunities that fit your qualifications. At the forefront of the staffing industry, Artech is a minority and women-owned business enterprise (MWBE) committed to maximizing global workforce solutions on behalf of its clients. Artech's deep heritage, proven expertise and insightful market intelligence has secured long-term partnerships with Fortune 500 and government clients seeking world-class professional resources. Job Description Primary PurposeUnder close supervision, performs basic functions requiring technical knowledge utilizing electronic applications, processes, standards and document control processes/procedures.Principal Duties and ResponsibilitiesEngineering Standards: Continues to learn and apply standards, systems, document control, departmental guides and B&V policies and procedures. Quality / Continuous Improvement: Ensures that deliverables are accurate and compliant by continually developing knowledge of the B&V Quality Program. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Engineering Production: Broadens knowledge of the applications required to modify and develop less complex deliverables based on a variety of design inputs. May assist with minor computations such as material quantity estimates and dimensional checks. Project Coordination: May assist in coordinating deliverables with other groups involved on the same project to minimize interference or errors. Client Focus: Focuses on the needs of internal clients while attempting to gain basic understanding of external client's main interests and drivers. Knowledge Sharing, Innovation and Technology: Proactively seeks and shares knowledge of latest technologies and processes.Minimum QualificationsAssociate Degree in Drafting or an Engineering Design Related Technology preferred. GCSC (Draft generic educational equivalent required. Minimum of 1 year related work experience.Preferred Job Qualifications1 year of experience required. Proficiency with Bentley Microstation required (**THE CANDIDATE WILL BE TESTED ON THIS**) Experience with AutoCAD and/or PLS-CADD are a plus but not a requirement. Diploma or Certificate preferred. Non-Technical: Learning on the Fly, Problem Solving, Perseverance, Patience, Time Management, Drive for Results, Self Development, Customer Focus, Listening,Informing. Technical: Intermediate knowledge of Computer Automation Additional Information For More Information, Please Contact Subh ************

Overview At MasTec Communications Group we build for the future. Yours and ours. As a MIcrowave Radio Technician III Travel, you will develop new skills, work in a safety-minded environment, and join us in expanding technology for a better community. Join the MasTec family and help us provide the highest level of quality service to our customers and communities while maintaining our commitment to safety! Responsibilities As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport Qualifications About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Bereavement leave Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers #HotJobs #LI-EP1 About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Bereavement leave Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers #HotJobs #LI-EP1 As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications 2nd Shift/3rd SHIFT (3pm-11pm,11pm-7am) FIRST SHIFT 1st Shift; 7AM-3PM Electronic Technician needs 2+ years of experience as an Mechanical / Electronic Technician Electronic Technician requires: Work experience preferably in a prototype build process environment. Technicians should be able to work either sitting or standing, performing complex repetitive tasks over the course of an 8 hour shift. Fine motor skills and good hand dexterity are critical to performing the tasks associated with the positions. Electronic Technician duties: operate complex process equipment, must be able to work in Clean room environments. Technicians will be building prototype assemblies and working with engineers on newly developed process equipment to assist in process development, debug of equipment, and process debug. Work with engineers assisting with project work Provide database reports/queries routinely Additional Information $19hr 6 MONTHS

The Hardware Engineering Technician IV will be part of an engineering team developing power management hardware in Nickel-Zinc (NiZn) battery backup systems for multiple industries. They will be responsible for performing electrical and mechanical tests on engineering prototypes and preproduction units under the guidance of Engineers and Project managers. The selected candidate will also be supporting the development of electrical architecture and design, integration and debugging of new electrical hardware and firmware, and validation of the design in a structured engineering environment. This role will work on-site at ZincFive HQ in Tualatin, Oregon and will report to the Technical Engineering Manager. Hardware Engineering Technician IV Job Duties: * Assemble prototypes of battery packs, Battery Management Systems (BMSs) and Uninterruptable Power Supply (UPS) systems * Create and assemble test fixtures * Modify circuits as directed by the engineers * Provide feedback during the prototype assembly process, calling out manufacturability issues early in the design process. * Set up and operate test equipment to evaluate performance of prototype parts, assemblies, or systems under simulated operating conditions and record results * Test and monitor the performance of electrical circuits as designed by engineers * Help with electrical schematic capture and Bill of Materials (BOM) maintenance * Setup and perform reliability tests on various key system components. * Participate in failure root cause analysis and support the corrective actions implementation * Perform hardware and software design verification and validation testing Job Requirements: * Associate's degree in applied science, Electronics * 4+ years of experience * Aptitude in the use of hand tools for mechanical assembly, electrical soldering, and wiring * Experience in prototype assembly, testing and documentation * Experience reading electrical schematics and mechanical drawings * Experience with Oscilloscopes, Digital Multi Meters (DMMs), Power Analyzers, Signal Generators etc. * Familiarity with Altium or similar schematic capture program * Experience working in an engineering test Lab and product development environment * Experience building fixtures for test setups * Experience using data acquisition systems (DAQs) * Experience working with thermal chambers * Experience programming and debugging systems with microcontrollers * Proficient in MS Office 365 tools Preferred Skills: * Experience with Power Electronics * Experience with Battery Management Systems (BMS) * Experience with Printed Circuit Board layout * Experience with Basic 3D modeling (SolidWorks CAD) * Experience running additive manufacturing equipment (FDM 3D Printer) Key Competencies: * Attention to detail * Integrity * Data collection and analysis * Problem-Solving * Results Orientation * Sound engineering/scientific judgment * Teamwork * The ability to assess and initiate things independently * Excellent verbal and written communication skills Physical Requirements and working conditions: * Work involves sitting, walking, standing, bending, stooping, and lifting to 40 pounds * Requires close visual acuity and the ability to distinguish color * Office, warehouse, and lab environments * Requires the ability to wear PPE when necessary, on the face and body Salary offers will depend on factors that include the location you work from, your level, education, training, specific skills, years of experience and comparison to other employees already in this role. In addition, the successful candidate for this position will become eligible for a comprehensive set of outstanding benefits, including medical, dental, vision, life insurance, 401k, paid sick time, paid time off for vacation, paid holidays, paid community service days, professional/personal learning program, and applicable state/federal paid family leave. ZincFive is committed to employing a diverse workforce. As an Equal Opportunity and Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status. We maintain a safe workplace and perform pre-employment testing. ZincFive is a participant in E-Verify and receives employment authorization of new hires through Social Security and the Department of Homeland Security databases.

Description Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). Responsibilities:Work closely with a cross-functional engineering team to develop next-generation industrial fiber laser components and systems. The successful candidate will: Build and characterize prototypes and product assemblies Work closely with engineers to Develop and document processes and tooling Assist in transferring products to manufacturing, including training of operators Maintain equipment, organize materials and supplies, and ensure safe operation of production areas Troubleshoot problems in the factory Qualifications: Associates Degree or higher in lasers, optics, electronics, or another engineering discipline, or equivalent experience in related technologies Experience with lasers, optics, and fibers Experience with tools and equipment for fiber processing and inspection Experience supporting engineers working with lasers, fiber optics, electro-optic or opto-mechanical devices, or electronics Meticulous attention to detail, highly organized, self-motivated Good written and verbal communication skills Demonstrated problem-solving skills Experience with Excel and data-analysis software nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting level and pay depends on qualifications: Engineering Technician I - $23.41 - $29.30 per hour Engineering Technician II - $25.49 - $33.10 per hour Target Cash Bonus with potential payout of up to 2% of earned wages 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays Eligible for health benefits on the 1st day of the month after your start date Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance Employee Assistance Program Aflac Supplemental Insurance Flexible Spending and Health Savings Accounts Employee Stock Purchase Plan 401(k) with company match and immediate vesting Jury Duty and Bereavement Leave Pay Tuition Assistance Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or [email protected]. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: E-Verify Participation Poster Right to Work Poster