Top Electronics Technician Lead Skills

Below we've compiled a list of the most important skills for an Electronics Technician Lead. We ranked the top skills based on the percentage of Electronics Technician Lead resumes they appeared on. For example, 8.7% of Electronics Technician Lead resumes contained Component Level as a skill. Let's find out what skills an Electronics Technician Lead actually needs in order to be successful in the workplace.

The six most common skills found on Electronics Technician Lead resumes in 2020. Read below to see the full list.

1. Component Level

high Demand
Here's how Component Level is used in Electronics Technician Lead jobs:
  • Utilized sophisticated test equipment to identify system failures to the component level.
  • Performed circuit and component level troubleshooting and repair.
  • Trained lower level techs component level troubleshooting.
  • Tested and troubleshot to both system and component level various SATCOM and radio products using both digital and RF capabilities.
  • Diagnosed and repaired trainer system hardware issues to the component level using schematics, functional descriptions and system layout drawings.
  • Lead technician responsible for the testing and component level troubleshooting, & training of all Technicians on p6 digital boards.
  • Calibrate, test, troubleshoot, inspect and rework various printed circuit boards to component level.
  • Serviced, repaired and operate all testers to system level, board level and component level.
  • Evaluated, troubleshot, and repaired various industrial electronics, almost exclusively to the component level.
  • Test and component level repair of audio equalizers, mixers, and high power amplifiers.
  • Train and assist other technicians with processes of component level testing and troubleshooting.
  • Bench repair work at board and component level for consumer electronics equipment.
  • Repair all equipment to component level and supervise others in repair.
  • Test & component level repair of in-home and hospital medical products.
  • Performed component level troubleshooting and repair using various types of test.
  • Performed bench testing including troubleshooting to the component level.
  • Tested and diagnosed circuit board to component level.
  • Circuit card test and repair to component level.
  • Fix down to component level.
  • Repaired component level circuit boards.

Show More

2. Customer Service

high Demand
Here's how Customer Service is used in Electronics Technician Lead jobs:
  • Record daily production logs using Microsoft Word/Excel, General customer service operations via telephone.
  • Provide Technical support to Customer Service Department and directly to customers.
  • Performed customer service and provided telephone support for troubleshooting procedures.
  • Provide exceptional, knowledgeable customer service.
  • Assisted management with the training of associates and provide input about associate performance for both customer service and sales associates.
  • Lead the electronics sales team to supply excellent customer service and knowledge in products at Kmart.
  • Meet all customer needs and provide exceptional customer service.
  • Performed and assisted in all aspects of customer service.
  • Tool usage, computer skills, and customer service
  • Trained sales associates on proper customer service techniques.
  • Maintain a great customer service.
  • Received multiples customer services acknowledgements from customers.
  • Trained 10 new employees on all customer service and sales associate responsibilities within electronics department through individual coaching and mentoring.
  • Provided outstanding customer service to all three portions of the company Fracturing, Coil Tubing, and Cementing Services.
  • Skilled in customer service, skilled in using store's handheld computer and registers.
  • Job duties: Supervise electronics associates and ensure customer service standards are met.
  • Received the Customer Service All-Star Award, highest award offered by Staples.
  • Assisted with Customer Service and POS duties as business dictated.
  • Cashier Provide prompt and friendly customer service during check-out.
  • Make sales goals Customer service Shipping and receiving

Show More

3. Preventative Maintenance

high Demand
Here's how Preventative Maintenance is used in Electronics Technician Lead jobs:
  • Coordinated weekly preventative maintenance and controlled work authorization request in Navy shipyard for all mission critical electronic equipment.
  • Managed administrative audits and planned required for preventative maintenance and upkeep of electronic equipment.
  • Performed Preventative Maintenance on equipment.
  • Provided expert oversight of the preventative maintenance, troubleshooting, repair, and replacement of system modules and circuit cards.
  • Developed and upgraded preventative maintenance procedures for components, equipment, parts, or systems.
  • Used SAP software for inventory control of spare parts used in repairs and preventative maintenance.
  • Diagnose, repair, and provide minor and major preventative maintenance of electronic equipment.
  • Perform monthly and annual preventative maintenance on all testing equipment.
  • Perform preventative maintenance (Oil, filter, fluid changes) for DRASH/PSI/ECU systems on schedule and in a timely fashion.
  • Maintained PLCs and systems related to NC/CNC equipment, Responsible for preventative maintenance procedures in accordance with ISO-9000 standards.
  • Performed Preventative maintenance on well services Frac and Cement equipment.

Show More

4. Electrical Systems

high Demand
Here's how Electrical Systems is used in Electronics Technician Lead jobs:
  • Designed, constructed and tested prototype equipment for electrical systems and components, consistent with engineering and other specifications.
  • Researched information to solve unusual electronics problems by analysis and tests on various electronic and electrical systems.
  • Assisted newer electronic technician with installation, repairs and maintenance of electrical systems.
  • Supervised maintenance operations for F/A-18 and F-14 electrical systems under MIL-STD in-operable specifications.
  • Produce method statement and risk assessment document for the removal and installation of cubicles and other electronic/electrical systems.
  • Conduct training for all electrical/electronic junior personnel in basic electrical systems

Show More

5. Electronic Test Equipment

high Demand
Here's how Electronic Test Equipment is used in Electronics Technician Lead jobs:
  • Managed 13 personnel in the inventory, and distribution of over $750K worth of general purpose electronic test equipment.
  • Mentor junior technicians and calibrate RF and general purpose electronic test equipment.
  • Inspected, tested, and certified telecommunications equipment and circuits utilizing various electronic test equipment.
  • Manufactured and assembled electrical/electronic test equipment.
  • Perform routine and advanced equipment troubleshooting/repair utilizing PC based diagnostic software, Oscilloscopes, Process Calibrators and electrical/electronic test equipment.
  • Conducted component level repair of analog and digital electronic systems using technical documentation and a wide variety of electronic test equipment.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. PLC

high Demand
Here's how PLC is used in Electronics Technician Lead jobs:
  • Set up and programming of Allen Bradley PLC's Upgrading rebuilding of 12-24 VDC mobile cementing and hydraulic fracturing units.
  • Developed system to manage trim system blowers (PLC program, electrical cabinet and installation).
  • Implemented installation, maintenance, and troubleshooting on production equipment and devices using programmable logic controllers (PLCs) and schematics.
  • Worked out of town for Southwire as a system troubleshooter on analog and PLC controls.
  • Identify, troubleshoot, and repair problems in production equipment Allen-Bradley, Siemens, Guiddings & Lewis PLC's /controls/protocols platforms.
  • Commissioned Wind Turbines PLC systems (Programmable Logic Controller) for overall automated functionality.

Show More

7. Circuit Boards

high Demand
Here's how Circuit Boards is used in Electronics Technician Lead jobs:
  • Manufactured, troubleshot, and repaired company engineered electronic temperature controlled circuit boards.
  • Conducted quality testing and calibration of circuit boards to fulfill manufacturing demand.
  • Repaired circuit boards used in digital video multiplexing security equipment.
  • Fabricate and assemble printed circuit boards, sub-assemblies, interface cabling, and chassis to complete microprocessor instrumentation systems.
  • Test, troubleshoot and repair printed circuit boards to meet IPC610A standard.
  • Fabricated one of a kind circuit boards to be used in those modifications
  • Performed debugging, troubleshooting, and testing of printed circuit boards.
  • Installed components, units and printed circuit boards following specifications.
  • Develop automated test programs for circuit boards and assembled products.
  • Repaired all circuit boards and power supplies in systems.
  • Test, repair and construct company engineered circuit boards.
  • Experienced in reading blueprints, circuit boards and diagrams.
  • Supported equipment upgrades, repair of components, assemblies, subassemblies, modules, cards, and printed circuit boards.
  • Tested, analyzed and repaired Transcoder Base Stations and pertaining circuit boards.
  • set up for production builds electronic circuit boards ordering and replenishment of Kanban system delegation of employees of work order pulling

Show More

8. Trouble Shooting

high Demand
Here's how Trouble Shooting is used in Electronics Technician Lead jobs:
  • Provided audio and video trouble shooting from the head end video distribution to meet the patients' needs.
  • Conducted Hill-Rom Patient Nurse call NCM and NNC systems add, moves, changes and trouble shooting.
  • Work with through hole and surface mount component level repair, trouble shooting and design.
  • Performed electrical trouble shooting for the building and grounds and completed repairs as necessary.
  • Trouble shooting an array of machinery from, electronics, pressure to computer problems.
  • Trouble shooting and repairing cellular phones to the component level.
  • Trouble shooting complex electronic circuits to component level.
  • Participated in trouble shooting for technical problems.
  • Power amplifier and preamplifier trouble shooting and repair, up to component level.

Show More

9. Electronics Department

high Demand
Here's how Electronics Department is used in Electronics Technician Lead jobs:
  • Participated in establishing and monitoring 5S throughout Electronics Department.
  • Perform local maintenance for electronics department and general area.
  • Created all documents for the Electronics Department; such as Process Map, Procedures, Work Instructions and Job Aids.
  • Coordinated demo days between MarketSource and Target leadership for Direct TV, Toys & Electronics departments, and promotional information.
  • Started as a cashier and worked my way up to being a department lead in the electronics department.
  • Aided in moving newly acquired electronics department from a company in Houston Texas to Tucson, AZ.
  • Managed day to day operations in the electronics department by managing 7 customer service team members.
  • Maintain the stock, including ordering new products for the Electronics Department.
  • Communicate with customers about their desires and needs from the electronics department.
  • Managed and scheduled employees in the electronics department.
  • Managed the Electronics Department and Tech Center.
  • Maintain brand look through Electronics department.
  • Worked sales in the electronics department.
  • Cashier, Electronics Department Head, and Backroom Lead are the job titles I held while working at Kmart.
  • Trained and Solder certified all Electronics Department employees per IPC-610 Rev D. Assign daily production assignments to employees.
  • Assisted in the recruiting, onboarding, and training of new associates for the electronics department.
  • job duties included sales in electronics department unloading trucks customer service, building displays, and audits.

Show More

10. Radar Systems

high Demand
Here's how Radar Systems is used in Electronics Technician Lead jobs:
  • Streamlined test equipment program and completed high-visibility installations of SATCOM, Navigation, and Radar systems; zero discrepancy assessment.
  • Perform scheduled, unscheduled and emergency maintenance on radar systems.
  • Trained 400 junior personnel in the maintenance and repair of air traffic control radar systems.
  • Conduct tests and analysis of radar systems and subsystems performance.
  • Performed corrective and preventive maintenance on Communications and Radar Systems in various frequency ranges including satellite communications and Air-Traffic Control Radar.
  • Provide comprehensive technical support to direct preventative and corrective maintenance functions for broad range of complex communications and radar systems.

Show More

11. Test Procedures

high Demand
Here's how Test Procedures is used in Electronics Technician Lead jobs:
  • Performed computer sequenced start-up, shut down and in the event of problems, performed subsystem recovery and test procedures.
  • Scheduled and coordinated work, trained technicians, wrote test procedures, and repaired computer boards.
  • Perform or recommend changes to schematics, test procedures, manuals, and other documentation.
  • Test unit as required per Work Instructions, Test procedures and/or Drawing requirements.
  • Develop test procedures for cables and assemblies.
  • Created test procedures and maintained test equipment.
  • Verify test procedures and test systems for reliability and repeatability.

Show More

12. Technical Support

high Demand
Here's how Technical Support is used in Electronics Technician Lead jobs:
  • Provided telephone technical support to customers regarding troubleshooting and installation of printer parts.
  • Provided technical support for line operators during assembly work.
  • Performed technical support for internal and external customers.
  • Led technical support team dedicated to providing exceptional support for manufacturing staff, field service, and engineering.
  • Provide Field Service technical support to customers with issues at the customer's site.
  • Integrated with aerospace contractors when technical support was required based on program needs.
  • Provided technical support and training for all users of electronic equipment.
  • Provided technical support for the electronic gear that supports testing.
  • Provide technical support to service centers and in-house technicians.
  • Perform technical support via phone or email to customers.
  • Provide technical support (Field and Shop).
  • Executed installation, familiarization, and technical support for analytical systems.
  • Provided technical support to customers for complex computer issues .
  • Provided intensive onsite technical support of AK Steel's 5 stand cold rolling mill at Middletown Works in Middletown, OH.

Show More

13. Frequency Counters

high Demand
Here's how Frequency Counters is used in Electronics Technician Lead jobs:
  • Skilled with the use of phone simulators, multi-meters, oscilloscopes, and frequency counters.
  • Operated oscilloscope, signal generator, frequency counters.
  • Measured transmission signal with frequency counters.
  • Utilized various test instruments, including oscilloscopes, frequency counters, and digital multiple meters.
  • Experience using spectrum analyzers, signal generators, power meters, audio analyzers, frequency counters, and modulation meters.
  • Use of Test Equipment includes: Oscilloscopes, Signal Generator, Frequency Counters, Spectrum Analyzers and Power Meters.

Show More

14. Electronics Technicians

high Demand
Here's how Electronics Technicians is used in Electronics Technician Lead jobs:
  • Provided both technical and administrative support for all electronics technicians.
  • Supervised 12 Electronics Technicians and 7 Interior Communications Personnel.
  • Shift leading Petty Officer supervised a twelve hour shift of electronics technicians in support of flight operations.
  • Coordinate shop and field workload requirements for all electronics technicians.
  • Trained, managed and mentored 10-15 junior electronics technicians.
  • Assist in the supervising of four Electronics Technicians * Some computer repair and networking experience.

Show More

15. PCS

average Demand
Here's how PCS is used in Electronics Technician Lead jobs:
  • Designed vision systems utilizing optics and light sources, several cameras interfaced with PCs, private networking and Ethernet communications.
  • Repair, calibrate, and update printers, plotters, monitors, keyboards, and PCs to component/system level.
  • Verified, tested, tuned, calibrated, and debugged 40W PCS/AWS Distributed Antenna Systems (DAS).
  • Involved in maintenance of laboratory PCs with both hardware rebuild, software reconfiguration and upgrade.
  • Install and backup, restore, repair and maintenance PCs and Laptops.
  • Upgraded all PCs hardware and software in a windows platform.

Show More

16. Fiber Optic

average Demand
Here's how Fiber Optic is used in Electronics Technician Lead jobs:
  • Repaired a major Fiber Optic Communication System quickly restoring the primary communication system for the Airfield.
  • Supervised a team of 5-10 employees in the pulling, termination, and testing of Cat3/5/5e/6 and 850/1300 fiber optic cable.
  • Worked on the installed team terminated fiber optics, networking cables, and phone lines within the customers secured facility.
  • Maintained state of art laser graphic and fiber optic systems, providing realistic training environments for Pilots to train.
  • Diagnosed and repaired Fiber Optic Fusion Splicers and related accessories.
  • experience with Cable, Cat6, CATV and Fiber Optic cables.
  • cable harness assemblies, circuit cards, power supplies, fiber optic cables, RF cables, etc.)

Show More

17. Setup

average Demand
Here's how Setup is used in Electronics Technician Lead jobs:
  • Provided training to operating personnel on the setup and operations of assigned communication-electronic systems, generators, and environmental control systems.
  • Install new aisles, fixtures, signage, and other displays that needed to be setup for product promotions.
  • Performed the setup, calibration, testing and troubleshooting of circuits, components, instruments and mechanical assemblies.
  • Assisted customers in setup of systems, both in person and/or over phone, or via email.
  • Managed IT setup and service requests and provided technical support to clients.
  • Provided expert advice on computer setup, maintenance, and networking.
  • Provided service and repair with various analytical systems and setups.

Show More

18. PCB

average Demand
Here's how PCB is used in Electronics Technician Lead jobs:
  • Worked on a special projects team to improve the quality inspection of the PCB hand mount department by creating inspection manuals.
  • Performed component level troubleshooting & repair on digital switching PCB s in the Switch Systems Group.
  • Diagnosed and repaired PCB's to component level to IPC standards.
  • Performed modifications to PCB's as directed by engineering staff.
  • Build to spec of PCB, cables, crimping, cutting, and stripping of wires of all gauges.
  • Solder, repair, inspect PCB.
  • General ISO 9001 and IPC Certified daily work (pcb, documentation, etc).
  • Designed PCBs and harnesses used to streamline installation and service of equipment.LEVEL 4 INSTALLER/TECHNICIAN
  • Key Responsibilities: Same as above without the PCB Design responsibilities.

Show More

19. Security Clearance

average Demand
Here's how Security Clearance is used in Electronics Technician Lead jobs:
  • Hold active Top Secret SBI (TSSBI) security clearance.
  • Investigated and cleared for TS security clearance for this position
  • Maintained a secret security clearance .
  • Developed and implemented a system to help track unit members security clearances, and expiration dates.

Show More

20. Fault Isolation

average Demand
Here's how Fault Isolation is used in Electronics Technician Lead jobs:
  • Performed operational tests, fault isolation, and reliability testing utilizing a broad range of test equipment.
  • Performed fault isolation and repair of new and existing equipment.
  • Performed modification, fault isolation through circuit analysis to component level, and repaired Naval communication equipment.
  • Performed fault isolation, and repair of equipment utilizing system diagnostic software.
  • Perform initial inspections and fault isolation employing non-destructive LASER ablation, chemical and mechanical deconstruction.
  • Apply advanced technical knowledge, along with military technical electronics knowledge to fault isolation.

Show More

21. Spectrum Analyzer

average Demand
Here's how Spectrum Analyzer is used in Electronics Technician Lead jobs:
  • Operate software and interrupt data gathered from sensor, antenna, spectrum analyzer and other diagnoses equipment.
  • Utilized a Spectrum Analyzer to perform antenna transmit pattern measurement and antenna Gain measurement test.
  • Tested aircraft navigation products using spectrum analyzers and signal generators.
  • Operated complex test equipment including; signal generators, spectrum analyzers, network analyzers and oscilloscopes.
  • Tested, maintained and calibrated satellite communication equipment with spectrum analyzers and specialized test equipment.
  • Repair and calibrate Avionics test equipment utilizing voltmeter, signal generators, spectrum analyzer.

Show More

22. Cctv

average Demand
Here's how Cctv is used in Electronics Technician Lead jobs:
  • Assembled and tested remotely controlled industrial CCTV cams and digital recording systems.
  • Installed and programed CCTV systems including Pelco and Eye On.
  • Install and Troubleshooting CCTV Cameras System Responsible of the test engineering laboratory, and coordinate calibration for manufacturing instruments.
  • Performed preventative and corrective maintenance on Vindicator security system, CCTV and PABX telecommunication system.
  • Installed and maintained numerous CCTV systems for process monitoring and facility security.
  • Integrated non-contact temperature measurement control system via infrared CCTV systems.

Show More

23. Hand Tools

average Demand
Here's how Hand Tools is used in Electronics Technician Lead jobs:
  • Install electronic parts and hardware into assemblies, using soldering equipment and hand tools.
  • Use various hand tools to make modifications if needed.
  • Used multi-meters, soldering pens, basic hand tools and computers to manufacturing wiring harnesses to print and assembly final product.
  • Experience with cutting angle iron, use of power hand tools, drills, saws, sanders ect.
  • Used hand tools, oscilloscopes, luminance and color meters, multimeters for daily checks and troubleshooting.
  • Performed mechanically and electrical assembly using soldering iron and hand tools.

Show More

24. Technical Manuals

average Demand
Here's how Technical Manuals is used in Electronics Technician Lead jobs:
  • Organized and formulated Technical Manuals for team to increase their productivity and job efficiency.
  • Trained ATS personnel in the use of technical manuals, schematics, and test equipment to repair hospital systems.
  • Performed maintenance as recommended by manufacturer or military technical manuals (TMs).
  • Followed engineering drawings, schematics, safety procedures, military specifications, standards and technical manuals to accomplish assigned tasks.
  • Calibrated electronic equipment and instruments according to technical manuals * Analyzed and documented failure trends in SAP and other relevant software
  • Localized system malfunctions and performed corrective maintenance to shipboard standards using technical manuals, schematics, and knowledge of electronics/electricity.

Show More

25. AC

average Demand
Here's how AC is used in Electronics Technician Lead jobs:
  • Develop and maintain excellent working relationships with peers and supervisors within the department with occasional interface with management for information exchange.
  • Handled, processed, and distributed confidential/classified documents Worked alongside active duty military personnel; oversaw and collected all maintenance performed.
  • Generated and maintained internal automated MS Access repair part database that greatly decreased system repair time and unnecessary part requisitions.
  • Coordinated with vendors for replacement of defective products, referred major hardware issues to manufacturer's engineers for resolution.
  • Assisted engineers in design, development, and evaluation of new products and recommend product improvements or manufacturing modifications.
  • Improved process and product reliability through consistent review of quality yields and corrective actions to eliminate yield detractors.
  • Fabricated wire harnesses and installed avionics and instrument packages in various military aircraft in the organization fleet.
  • Trained technicians to continually meet contractual agreements and customer specifications, as well as specified deadlines.
  • Job required precise soldering skills, identification of components and troubleshooting components and identifying for replacement.
  • Annotated all deviations from original contracted work and was given sign-off authority for completed contracts.
  • Analyze data acquired from electronic testing and troubleshooting procedures to determine what repairs are necessary.
  • Involved with the manufacturing and planning process of various projects incorporating AC/DC analog/digital drive systems.
  • Demonstrated effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Trained and instructed junior personnel and supported units on Tactical Tomahawk engagements and launching sequences.
  • Helped in the construction of automotive, aerospace, and broadband communications incorporated technology.
  • Coordinate programming and digital communication efforts with in-house contractors during construction of the facility.
  • Motivated production team by ensuring each team member understood deadline and budget requirements.
  • Worked closely with managers to develop new products according to custom requirements.
  • Facilitated provider work sessions, study halls and post-implementation analysis and optimization.
  • Maintained and repaired test fixtures for improved reliability of manufacturing electronic assemblies.

Show More

26. Communications Equipment

average Demand
Here's how Communications Equipment is used in Electronics Technician Lead jobs:
  • Provided significant contributions on system and operational checks of communications equipment, including TELCO connections and traffic.
  • Can perform installation, diagnostic testing, troubleshooting, and repair for communications equipment and electronics equipment.
  • Supervised group of technicians responsible for testing and installing satellite communications equipment.
  • Entrusted with the maintenance of mainframe computers, radar, and communications equipment.
  • Performed system security audits on communications equipment.
  • Direct the daily activities of up to 10 technicians in the manufacture of military communications equipment and devices.

Show More

27. Inventory Control

average Demand
Here's how Inventory Control is used in Electronics Technician Lead jobs:
  • Participated in inventory control to minimize shrink.
  • Maintained product inventory control and oversaw replenishment.
  • Performed property and inventory control duties, maintained status of equipment and parts orders.
  • Promote incentive programs within the department Maintain inventory control and customer service quality.
  • Coordinated interdepartmental activity with quality assurance, engineering, inventory control.
  • Warehouse operation duties included shipping and receiving, and inventory control.

Show More

28. Signal Generators

average Demand
Here's how Signal Generators is used in Electronics Technician Lead jobs:
  • Use of electronic and electrical test equipment including voltmeters, oscilloscopes, pattern generators, signal generators.
  • Perform continuity checks, locate and correct wiring errors using measuring instruments ohmmeters and signal generators.
  • Aligned and calibrated production models telemetry receivers, signal generators, multiplexers
  • Developed systems to automatically calibrate signal generators and frequency converters.
  • Tested calibrated and repaired electronic signal generators.
  • Performed product testing using HP network analyzer, RF frequency signal generators HP E4431B, and Marconi 2031.

Show More

29. New Technicians

average Demand
Here's how New Technicians is used in Electronics Technician Lead jobs:
  • Trained new technicians and directed others to meet work priorities and schedule demand.
  • Mentored and trained new technicians to meet International Rectifiers standards of performance.
  • Train new technicians on all electronic equipment and testing devices.
  • Trained new technicians on the maintenance of supported equipment.
  • Supervised, hired, and trained new technicians.
  • Assisted in repair training initiatives with new technicians.
  • Provided on the job training for new technicians.
  • Trained and assisted new Technicians.
  • Train and mentor new technicians.
  • Train and evaluate new technicians Assist technicians in complex troubleshooting and test station malfunctions.

Show More

30. New Equipment

low Demand
Here's how New Equipment is used in Electronics Technician Lead jobs:
  • Maintained working inventory of all test equipment, charting depreciation and repairs so new equipment could be ordered or refurbished.
  • Assign NETT (New Equipment Trainer Team) member to ensure proficiency of all employees.
  • Install new equipment or make modifications.
  • Provided technical training to customers and company personnel on existing and new equipment as required.
  • Led implementation of preventive maintenance programs, generated maintenance procedures for new equipment and maintained/updated equipment performance and maintenance databases.
  • Trained military and civilian employees on new equipment, operational procedures, troubleshooting techniques and maintenance procedures as required.

Show More

31. HF

low Demand
Here's how HF is used in Electronics Technician Lead jobs:
  • Maintained data forms - Surface HF Communications System Maintenance Technician Maintained and monitor operational readiness of ship's exterior communications.
  • Operated and maintained 60 UHF radios resulting in sustained communications and operational readiness for the Southwest Operating Region.
  • Performed documented scheduled preventative maintenance on seven high powered (10KW) HF transmitter/power amplifier and antenna systems.
  • Received specialized training and understanding on Navigational Equipment, GPS theory, HF communications and UPS/Generator theory.
  • Performed preventative/corrective maintenance on SATCOM systems and subsystems on Ship and Shore SHF satellite communication systems.
  • Developed and performed system operation and verification test plan for incoming mobile EHF communications systems.

Show More

32. Sales Goals

low Demand
Here's how Sales Goals is used in Electronics Technician Lead jobs:
  • Achieved sales goals and training schedules: Constantly reached sales goals which were set monthly.
  • Guided employees on how to obtain monthly sales goals in multiple metrics.
  • Set sales goals and limits for sales team monthly.
  • Exceeded sales goals monthly resulting in store profitability.
  • Ensured sales goals were in place and sales zones were merchandized according to company SOP.
  • Developed new selling methods for representatives to use to achieve daily sales goals.
  • Meet sales goals Answer questions and solve problems.

Show More

33. UHF

low Demand
Here's how UHF is used in Electronics Technician Lead jobs:
  • Installed and managed all UHF, VHF, and Microwave communication systems on largest US Coast Guard base in the nation.
  • Utilized Microsoft Office Word, Notepad, and Excel to track project progress and assignment of IP addresses regarding VHF/UHF radios.
  • Qualified two different courses of instruction in the AN/SRC-47 and UHF Line of Sight / Satellite Communication systems.
  • Supervised, repair and provided maintenance Air and surface search radars, aircraft navigation equipment and HF and UHF communication equipment.

Show More

34. DOD

low Demand
Here's how DOD is used in Electronics Technician Lead jobs:
  • Provided on-site audits for the Department of defense (DoD), covering all related projects and equipment installed.
  • Served as Liaison contact between Contractors and DOD personnel.
  • Reported ISR data to satisfy strategic intelligence requirements levied by DOD, US Forces Korea (USFK) and 7 AF.
  • Certified by DOD and NSA on engineering, installation, and repair of secure cryptographic devices and other electronic communications equipment.

Show More

35. Satcom

low Demand
Here's how Satcom is used in Electronics Technician Lead jobs:
  • Repaired, maintained and serviced complex Satellite Communications (SATCOM), and MI Electronic Warfare Systems (EWS).
  • Conducted daily, weekly, and monthly SATCOM usage reports.
  • Conducted monthly and weekly maintenance on SATCOM equipment.
  • Maintain and operate two Air Force SATCOM terminals with all associated equipment including two 38' satellite antennas.
  • Aided the SATCOM site transition to include Teleport resources with civilian counterparts.
  • Maintained AN/PSC-15 Klas Pioneer portable secure SATCOM kits.

Show More

36. GPS

low Demand
Here's how GPS is used in Electronics Technician Lead jobs:
  • Project lead for installation of the Differential Global Positioning System (DGPS) on four of the Hawaiian Islands.
  • Calibrated location by utilizing Differential Global Positioning Satellite (DGPS) to attain the10 digit grid (MGRS).
  • Install and maintain BFT, INS/GPS systems, and pilot guidance systems.
  • Integrated an Arduino Microcontroller with speakers and GPS unit to prototype a guidance system that helps visually impaired students at Purdue.
  • Maintained the operational readiness of various navigational equipment to include Radar, GPS, Inertial Navigation systems and Electronic Countermeasures suites.
  • Interfaced, operated, tested, and troubleshot surface and subsurface positioning systems including differential GPS and ultra-short baseline acoustics.

Show More

37. SMT

low Demand
Here's how SMT is used in Electronics Technician Lead jobs:
  • Conducted readiness for [ ] and safety audits SMT, PTH, and BGA solder certified.
  • Field Maintenance Electronic Technician Level I Ponder, Texas Completed SMT1 mechanical and electrical training.
  • Trained in Los Angeles, California on SMT which (at that time) most Printed Wiring Assemblies began implementing.
  • Test and troubleshoot complex analog/digital SMT circuitry to component level in a production environment.
  • Performed component level fault isolation and repair, including replacement of SMT technology components on various communication equipment; i.e.
  • Performed repairs and component changes on high-density SMT printed circuit boards using state-of-the-art equipment.

Show More

38. QA

low Demand
Here's how QA is used in Electronics Technician Lead jobs:
  • Supervised a team of technicians in the servicing, maintenance and repair of all communications/electronics assemblies assigned to APS-5 Qatar footprint.
  • Processed 540 advanced software and equipment changes, completed 12,800 repair actions, and performed 12,000+ QA inspections / functions.
  • Provided technical support to lower level technicians and to the QA and manufacturing departments.
  • Installed PLC program and initiated programming revisions on IQAN Parker/Hannifin proprietary control system.
  • Assigned to position of Site Lead for Al Taqaddum, Iraq from Oct. 2009 until site closure on Dec. 2009.
  • Oversee and assist with Source Inspections for CB&I and Southern Company, in accordance with NQA-1.

Show More

39. IP

low Demand
Here's how IP is used in Electronics Technician Lead jobs:
  • Lead a team of six electrical personnel that modified electrical, communication, and navigation equipment on A/MH-6M military helicopters.
  • Lead a team of electrical technicians that modified electrical, communication, and navigation equipment on CH47 Chinook military helicopters.
  • Monitor equipment operation and correct malfunctions ensuring effective and efficient operation and follow up on work in progress.
  • Demonstrated exceptional operational and technical knowledge of major navigational equipment which resulted in recognition as a system expert.
  • Maintained existing systems and subsystems, trouble-shot malfunctions, insured electronic equipment complied with required specifications and blueprints.
  • Performed tasks associated with test and repair of equipment including inspections and evaluation of component performance.
  • Maintained electronic instrumentation to provide reliable well maintained equipment to ensure service quality standards were met.
  • Developed and maintained documentation, maintenance and troubleshooting procedures for equipment and local area network systems.
  • Identified and resolved equipment malfunctions, working with manufacturers or field representatives to procure replacement parts.
  • Conducted preventative and corrective maintenance of the ship's air traffic interrogation and identification electronic system.
  • Diagnosed and corrected electronic circuitry malfunctions, also assist in the development of electronic equipment.
  • Maintain system or product specific historical repair records that document testing and operation of equipment.
  • Designed and implemented preventative, corrective and predictive maintenance of all electronic and conveyor equipment.
  • Diagnosed and repaired a wide range of hybrid analog/digital audio amplifiers and associated peripheral equipment.
  • Prepared equipment descriptions, part numbers and nomenclatures for system management and maintenance operations.
  • Handle procurement, logistics, and delivery to technicians for installation on stimulation equipment.
  • Perform post-repair operational testing and verification to ensure equipment is in proper operating condition.
  • Work closely with engineers and management on equipment repairs and continuous improvement projects.
  • Prepared personnel performance reviews and instructed maintenance training on wide array of equipment.
  • Assisted Military personnel in the ships Helicopter Control Tower during flight operation training.

Show More

40. Computer System

low Demand
Here's how Computer System is used in Electronics Technician Lead jobs:
  • Performed hardware maintenance on various Mil-spec and commercial desktop and laptop computer systems employed in Remote Operations Facility.
  • Perform maintenance of computer systems including Data acquisition, AMI and Can bus software and hardware updates.
  • Guided and assisted others in troubleshooting various mainframe and computer system boards.
  • Repaired all computer systems and accessories.
  • Fabricated, calibrated, tested and shipped digital image processing computer systems for hospital, laboratory and college universities.
  • Developed training schedule and provided Field Support on all electronic and IT computer systems in Mobile-Data Collection Centers.

Show More

41. ESD

low Demand
Here's how ESD is used in Electronics Technician Lead jobs:
  • Adhere to ESD requirements in board handling and safety procedures in the performance of job duties.
  • Created specifications for wire harnesses and cable assemblies Structured ESD procedures and implemented them in electronic technician work areas.
  • Created Electro Static Discharge (ESD) training for all electronics employees; and certified employees to standard.
  • Have met and exceed ISO standards/High ESD awareness Reputation for high quality work with minimal supervision.
  • Provided training on forklift, esd, and auditing procedures.
  • Provided Electrical Engineering assistance for overloaded Electrical Engineers within the ESD Division.

Show More

42. VHF

low Demand
Here's how VHF is used in Electronics Technician Lead jobs:
  • Performed Depot LevelRepairs and Overhauls on various VHF/UHF/Secure Voice communications systems.
  • Instituted preventive and corrective maintenance on operational equipment, including but not limited to UHF/VHF voice communications.
  • Maintained and performed organizational and intermediate level maintenance on UHF/VHF communications in support of National Air Space.
  • Provided daily technical/operational support to VHF/UHF Communications and Radar Platforms.
  • Maintained antiquated VHF communications suite at 100% availability.
  • Repaired consumer electronics and marine VHF radiotelephones.

Show More

43. LAN

low Demand
Here's how LAN is used in Electronics Technician Lead jobs:
  • Informed the corporate digital content strategy by creating landscape and competitive analyses and developing an array of market entry scenarios.
  • Interact with engineers and pilots to isolate failures in numerous airplane configurations and set-up of installation menus.
  • Provided input for action/strategic plans and lead the technicians in implementing timely and on-target solutions.
  • Supervised electronics technicians in the Electronics/Avionics department and responsible for planning and directing work operations.
  • Experienced in maintaining continuity of power distribution during planned outages as well as casualty situations.
  • Planned overhaul of wiring and upgrade of systems to mitigate Electromagnetic interference issues.
  • Planned, scheduled, conducted and coordinated assigned engineering work to different departments.
  • Provided technical training and 24-hour emergency support to Surveillance and Security Departments.
  • Performed miscellaneous logistics tasks such as managing schedule for instrument calibration.
  • Prepared reports and conducted training for surveillance and security personnel.
  • Implemented business plan that helped to increase margin and overall profitability
  • Planned, organized and managed preventive and corrective maintenance programs.
  • Plant Facility restructured certain departments and personnel.
  • Repaired and/or calibrated miscellaneous electronic equipment.
  • Lead a project to install a vessel traffic system similar to PTC but on the inland rivers instead of railroad.
  • Created work schedules and support plans * Developed and produced technical work instructions and maintenance procedures * Assisted on contract proposals
  • Represented voice-of-customer to devise and execute business plans and merchandising strategies spanning product, price, place and promotion decisions.
  • Assisted in the installation of non-secure and secure local area networks (LAN) for mobile hydraulic fracturing sites.
  • Coordinated with management, production planning and supply chain to ensure all parts and tools were available when needed.
  • Planned work assignments based on general work schedules, methods, and policies set by the higher level supervisor.

Show More

44. Ethernet

low Demand
Here's how Ethernet is used in Electronics Technician Lead jobs:
  • Upgraded the LAN network from Token Ring to Ethernet company wide
  • Handled Software loading using RS232, Ethernet, CATV, and 1553 cables.
  • Use and thorough knowledge of oscilloscope, multi-meter, frequency counter, logic analyzer, [ ] Ethernet applications and modems.
  • Promoted to Test Services Manager Performed testing, troubleshooting, and repair of Ethernet and Arcnet PC boards.
  • Worked on multiple Naval Ships conducting shipboard installations such as fiber optic upgrades and Security camera installs and Ethernet upgrades
  • Terminated Ethernet and other cables depending on application.

Show More

45. Product Knowledge

low Demand
Here's how Product Knowledge is used in Electronics Technician Lead jobs:
  • Complete product knowledge used to help sales determine correct system for the end user.
  • Provide customers with product knowledge and personal engagement to drive department incremental sales.
  • Shared product knowledge with customers while making personal recommendations.
  • Shared product knowledge with customers while making personal recommendations.
  • Provided extraordinary customer service and product knowledge.
  • Assist vendors and all employees on product knowledge.

Show More

46. Comsec

low Demand
Here's how Comsec is used in Electronics Technician Lead jobs:
  • Download COMSEC material via STU-III terminal into the AN/CYZ 10(DTD).
  • Performed maintenance and rekey of communication security devices (Comsec) for U.S Navy submarines.
  • Provide practical application of In-depth knowledge of electrical circuitry, principles and formulas to COMSEC equipment.
  • Ensured that National Security Agency (NSA) approved components are used in COMSEC/CCI repairs.
  • Assisted in proper monitoring, storage and provided physical security for COMSEC materials.
  • Maintain a COMSEC account valued in excess of $2.5M.

Show More

47. Osha

low Demand
Here's how Osha is used in Electronics Technician Lead jobs:
  • Initiated necessary fall protection management system and received OSHA fall protection training.
  • Provided weekly safety briefs in accordance with OSHA standards and proper operating procedures.
  • Completed in accordance with HAZMAT/OSHA standards and wearing proper protective equipment.
  • Implemented regulatory safety requirements based on environmental, electrical, OSHA, and NRC regulations.
  • Developed checklists to ensure compliance with OSHA regulations and military safety regulations.
  • Insure all equipment meets NEC and OSHA standards.

Show More

48. Electronic Devices

low Demand
Here's how Electronic Devices is used in Electronics Technician Lead jobs:
  • Repaired electronic devices and inspected microelectronics circuit boards as well as tested, soldered, calibrated, and assembled cell phones.
  • Diagnosed and repaired all types of electronic devices from cassette recorders to cell phones.
  • Develop or modify industrial electronic devices, circuits, or equipment according to availably specifications.
  • Assist in the production of micro-electronic devices Support Engineers with various experiments Operate related equipment and conduct test on various RF devices
  • Created prototypes and manufactured broadcasting equipment for commercial use-Designed and built various prototype electronic devices for use by the Department of Defense
  • Exemplified in-depth understanding of operating and maintaining various electronic devices, including industrial semiconductors, solid-state drives, and industrial systems.

Show More

49. Technical Assistance

low Demand
Here's how Technical Assistance is used in Electronics Technician Lead jobs:
  • Provided technical assistance and training for user owned and operated automated telecommunications computer systems.
  • Completed work and provided technical assistance to lower grade workers, and established trade practices.
  • Provided technical assistance to over 60 customers monthly Resolved technical issues with engineers of major corporations
  • Serve as "go-to" person and provide technical assistance to other technicians and military personnel in proper troubleshooting techniques.
  • Performed technical assistance visits to surface ships and submarines providing requesting commands with advanced troubleshooting and in-depth preventive maintenance measures.
  • Maintained the daily operations of an electron microscopy laboratory and provided technical assistance to the peripheral nerve research group.

Show More

20 Most Common Skill for an Electronics Technician Lead

Component Level12.2%
Customer Service10.6%
Preventative Maintenance9.8%
Electrical Systems7.5%
Electronic Test Equipment7.5%
PLC4.8%
Circuit Boards4.3%
Trouble Shooting4.2%

Typical Skill-Sets Required For An Electronics Technician Lead

RankSkillPercentage of ResumesPercentage
1
1
Component Level
Component Level
8.7%
8.7%
2
2
Customer Service
Customer Service
7.6%
7.6%
3
3
Preventative Maintenance
Preventative Maintenance
7%
7%
4
4
Electrical Systems
Electrical Systems
5.4%
5.4%
5
5
Electronic Test Equipment
Electronic Test Equipment
5.3%
5.3%
6
6
PLC
PLC
3.4%
3.4%
7
7
Circuit Boards
Circuit Boards
3.1%
3.1%
8
8
Trouble Shooting
Trouble Shooting
3%
3%
9
9
Electronics Department
Electronics Department
3%
3%
10
10
Radar Systems
Radar Systems
2.9%
2.9%
11
11
Test Procedures
Test Procedures
2.8%
2.8%
12
12
Technical Support
Technical Support
2.7%
2.7%
13
13
Frequency Counters
Frequency Counters
2.6%
2.6%
14
14
Electronics Technicians
Electronics Technicians
2.6%
2.6%
15
15
PCS
PCS
2.2%
2.2%
16
16
Fiber Optic
Fiber Optic
2%
2%
17
17
Setup
Setup
1.9%
1.9%
18
18
PCB
PCB
1.9%
1.9%
19
19
Security Clearance
Security Clearance
1.7%
1.7%
20
20
Fault Isolation
Fault Isolation
1.6%
1.6%
21
21
Spectrum Analyzer
Spectrum Analyzer
1.4%
1.4%
22
22
Cctv
Cctv
1.3%
1.3%
23
23
Hand Tools
Hand Tools
1.3%
1.3%
24
24
Technical Manuals
Technical Manuals
1.3%
1.3%
25
25
AC
AC
1.2%
1.2%
26
26
Communications Equipment
Communications Equipment
1.2%
1.2%
27
27
Inventory Control
Inventory Control
1.2%
1.2%
28
28
Signal Generators
Signal Generators
1.2%
1.2%
29
29
New Technicians
New Technicians
1.2%
1.2%
30
30
New Equipment
New Equipment
1.1%
1.1%
31
31
HF
HF
1%
1%
32
32
Sales Goals
Sales Goals
1%
1%
33
33
UHF
UHF
1%
1%
34
34
DOD
DOD
1%
1%
35
35
Satcom
Satcom
0.9%
0.9%
36
36
GPS
GPS
0.9%
0.9%
37
37
SMT
SMT
0.8%
0.8%
38
38
QA
QA
0.8%
0.8%
39
39
IP
IP
0.8%
0.8%
40
40
Computer System
Computer System
0.8%
0.8%
41
41
ESD
ESD
0.8%
0.8%
42
42
VHF
VHF
0.8%
0.8%
43
43
LAN
LAN
0.8%
0.8%
44
44
Ethernet
Ethernet
0.8%
0.8%
45
45
Product Knowledge
Product Knowledge
0.8%
0.8%
46
46
Comsec
Comsec
0.7%
0.7%
47
47
Osha
Osha
0.7%
0.7%
48
48
Electronic Devices
Electronic Devices
0.7%
0.7%
49
49
Technical Assistance
Technical Assistance
0.7%
0.7%

10,850 Electronics Technician Lead Jobs

Where do you want to work?