Electronics technician jobs in Louisiana - 1,094 jobs

Reporting to the Laboratory Manager, performs calibrations on precision measurement equipment in the calibration laboratory and at customer locations, either within the customer's facility or as part of the Laboratory operation. ■ Perform routine calibration on Electrical/Electronics, Dimensional, Torque, Pressure, Force, and Thermodynamic instruments using precision reference standards. ■ Agree to and must successfully pass Background Screenings, Drug and Alcohol testing as required. ■ Agree to and must successfully pass ongoing safety training, both general and customer site-specific safety training. ■ Maintain an orderly work area and clean company vehicle. ■ Evaluate and troubleshoot non-operational instruments and perform minor repairs under the direction of laboratory management. ■ Follow calibration work instructions and methods. ■ Work closely with Metrologists, Technical Managers, Metrology Engineers, and the Laboratory Manager to ensure that the assigned work is completed in a timely manner. ■ Participate in ISO 9001 Audits and ISO/IEC 17025 Assessments with Laboratory Managers and Quality Managers. ■ Participate in inter and intra-laboratory proficiency testing. ■ Must demonstrate attention to detail and conscientiousness related to the quality of work. ■ Drive a company-issued vehicle as required for the job and follow any state and local laws while operating the vehicle. ■ Adhere to all Michelli policies and procedures. Experience ■ One (1) year or more in Calibration or another technical field is a plus. ■ Military experience is preferred. ■ Basic knowledge of industry standards and regulations is a plus. ■ Good knowledge of reporting procedures and record keeping. Qualifications ■ Experience in a wide variety of technical disciplines. ■ Technical reading comprehension. ■ Use of a computer - i.e. Microsoft Word, Excel, PowerPoint programs. Education ■ AS in a technical field is preferred. ■ Military training in Measurement Science or Calibration is a plus.

Company Profile Gulf Coast JCB is the authorized JCB dealer for South Louisiana, committed to delivering industry-leading products, responsive support, and a customer experience rooted in honesty, urgency, and professionalism. We invest in our people and offer highly competitive compensation for individuals with the drive to excel personally and professionally. Position Purpose Reporting to the Service Manager, the Service Technician is responsible for diagnosing, repairing, and maintaining a wide variety of construction and industrial equipment. This position is based in Baton Rouge, LA. Position Type: Full Time, Non-Exempt Major Tasks, Responsibilities & Key Accountabilities Troubleshoot and repair excavators, skid steers, track loaders, boom lifts, rollers, and other machinery. Repair, replace, and rebuild components on hydraulic, mechanical, electrical, and powertrain systems. Perform preventative maintenance, annual inspections, and certifications. Diagnose hydraulic system issues. Read and interpret parts diagrams, service manuals, wiring schematics, and hydraulic schematics. Document work is performed and complete service reports accurately. Maintain a clean, safe, organized work environment. Represent Gulf Coast JCB professionally with customers and coworkers. Essential Job Qualifications 3-5 years of experience repairing and maintaining compact or heavy construction equipment. Vocational training may be considered in lieu of experience. Welding experience. Computer literate with ability to learn diagnostic software. Strong history of safe work habits. High school diploma or GED. Basic math and measurement skills. Knowledge, Skills, Abilities & Competencies Ability to organize, prioritize, and manage tasks. Capable of working independently with minimal supervision. Ability to read and understand hydraulic, mechanical, and electrical schematics. Strong mechanical aptitude and attention to detail. Commitment to high-quality work. Positive attitude and strong work ethic. Physical Requirements Ability to stand, walk, lift, and carry materials for up to 12 hours. Frequent bending, kneeling, twisting, and working on uneven surfaces. Able to lift up to 75 lbs. Ability to use hands, arms, and legs to assemble and manipulate components. Ability to operate forklifts, cranes, and shop equipment as needed. Clear vision and hearing (with or without assistance). Good hand-eye coordination. Ability to communicate verbally in English at a functional level. What It Means to Work at Gulf Coast JCB Service technicians are the backbone of our dealership and the face of our service promise. This role is essential to delivering uptime, earning customer trust, and building a reputation of excellence along the Gulf Coast. JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state, and local laws. JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. EEO EMPLOYER/VET/DISABLED JCB is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, as a global company, JCB offers many job opportunities outside of the U.S., which can be found through our website at ******************** en-gb/about/careers.

The Hydrogen division of Linde. is currently seeking an Instrument & Electrical Technician that will be based at our Geismar, LA location. This position will report to the Maintenance Superintendent and will work with SELA Enclave Maintenance organization to support the safe & reliable operation of our facilities. Key Responsibilities: Prepare and maintain documentation such as EAM/Procal work orders, service reports and equipment calibration records as required by standards and procedures. Troubleshooting, maintenance and repair of low voltage electrical systems (600VAC and below). Troubleshooting, calibration and maintenance of pneumatic, analog and digital process control instrumentation utilizing P&ID and Schematic wiring diagram. Schedule and perform activities related to the operation and maintenance of electrical and electronic control systems, pneumatics, instrumentation, control valves, motor control systems, low voltage electrical distribution, computer interfaces, and analytical equipment Support of startup / shutdown and operations of process plant equipment Process analytical equipment calibration and maintenance which may include Thermal Conductivity, Gas Chromatograph, Electrolytic process analyzers. Ensure spare parts are available or replaced when used/installed. Use RCA methodology on failures and support plant reviews. Prepare and execute projects to improve facility availability and reliability. Maintain a high degree of personal safety and environmental awareness at all times. Required to climb ladders, stairways and operate man-lifts for elevated instrumentation and control valve maintenance. Schedule and Direct contractor activities in all related areas covered above when required. This position requires a combination of office work and field work. The technician will support the operation of our facilities to ensure they are maintained in a safe, reliable and environmentally friendly manner. The job occasionally requires overtime and call-outs on weekend, nights and holidays. Employee must be able to access elevated electrical and mechanical equipment via ladders, scaffolding and man-lifts. Position also requires providing turnaround support within the region. Excellent communication and interpersonal skills are needed to develop working relationships with maintenance and operations personnel in a team environment. Required Qualifications: Completion of a formal apprenticeship program or equivalent combination of work experience and technical training required. Associate Degree from a technical school is desired. At least 3+ years of related experience. Proven understanding of regulatory and industrial standards and codes. Proven understanding of control and instrumentation systems in industrial environment. Proven experience in CMMS systems such as ProCal and Infor EAM (SAP, Maximo etc.). Proven experience in computers and standard software packages (MS Office, E-Mail etc.). About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-JJ1

Description To perform monitoring, maintenance, troubleshooting and repairs on plant instrumentation, electrical and control (I/E/C) equipment at the Methanex Geismar facility according to applicable standards.Position Responsibilities• Uses systematic techniques to troubleshoot plant issues, identify root causes and recommend a suitable solution. • Performs corrective maintenance on failed I/E/C equipment. • Monitors I/E/C equipment and makes recommendations for optimization. • Supports the routine planning feedback as needed and performs coordination and execution of work. • Prepares job safety analysis (JSA/JHA) documents, identifying risk, mitigation controls and recovery measures. • Reviews job plans, verifying suitability, plant conditions are correct and material is available. • Leads work on the plant as a performing authority according to Methanex's Work Safety Control System (WSCS). • Updates logs, completes QA/QC documentation and reports, closing out work orders in a timely manner. • Supports in the continued revision of parts and equipment documentation, implementing change where appropriate. • Seeks more efficient ways to design, plan and execute work. • Ensures all plant maintenance is implemented in accordance with Methanex standards, best practices and all relevant USA legislation. • Adapts to changing priorities quickly. • Ensures availability for call-out. • Supports the Reliability Team with resolving plant issues. • Recognizes the Operations Team as a key stakeholder and customer in executing duties. • Constructs, test and commission new I/E/C equipment originating from new projects using issued for construction drawings and plans. • Supports colleagues in developing new project designs and execution plans, ensuring that flaws and maintainability challenges are engineered out through continuous feedback. • Manages, designs, plans and executes simple, low-risk projects. • Ensures all plant changes are implemented in accordance with the applicable Methanex Management of Change procedures. • Ensures work is performed efficiently and cost effectively. • Communicates, collaborates and supports colleagues locally and globally to achieve the goals of the department, site and organization. • Identifies key stakeholders, seeks their input and keeps them informed. • Shares knowledge and experience, coaching and mentoring colleagues. • Identifies training requirements for self and team. • Positively contributes to team engagement and morale. • Motivates team to excel. • Contributes to the organizational vision of Global Methanol Leadership and as a team member demonstrates the core values of integrity, trust, respect and professionalism. • Conducts all business in a manner which supports the Responsible Care ethic. • Networks with other Methanex sites to the mutual benefit of all sites. • Contributes to the ‘operational excellence' for Methanex USA as an effective member of the Maintenance Department. • Actively seeks out continuous improvement opportunities that enhances HSSEQ, productivity, reliability and cost efficiency.Position Qualifications• High school diploma or equivalent required. • Instrument/Electrical trade certification or NCCER certification or related Associate's degree required. • 4-6 years of experience in instrument, electrical or control systems for a manufacturing facility. • Experience with predictive and preventative maintenance programs. • Experience with electrical distribution and substation maintenance. • Experience with instrument calibration programs. • Experience with continuous emission systems and process analyzers. • Experience with DCS, ESD and PLC systems. • Excellent computer skills, including Microsoft Office and asset management system software.

Travel - either alone or with team members - to customer sites both on and offshore with company supplied equipment to meet with customer to discuss operational problems with equipment Perform Pre-Work JSA “Job Safety Analysis” Assess condition and problems with equipment and make appropriate repair. Assumes responsibility for communication and education between the company and clients Responsible for communicating company deliverables to the client and for the accuracy and the timeliness of all internal and external communications and reporting. Assumes responsibility for the overall safety of the work environment. Responsible for ensuring compliance with company, client, OSHA, and other applicable standards. Perform Behavioral Safety Observations as needed. Ensures that work area is clean, secure, and well maintained. Assumes responsibility for related duties as required or special projects as assigned. Training/Mentoring - A few of the activities in the area of Training/Mentoring will include but are not limited to: Assist in training/mentoring of new employees. Able to convey obtained knowledge from seminar/training sessions. Able and willing to work on-call and off shift as required by customers or management. Troubleshooting and repair of control and automated valve assemblies Use of basic hand and measurement tools Some lifting, bending and long-term standing required. Ability to work independently in a fast-paced environment Available to work overtime including some weekends. Follow John H. Carter Co., Inc. policies, procedures and methodologies. Work collaboratively with development staff and support staff to maintain thorough knowledge of product capabilities, and to ensure that all communications between John H. Carter Co., Inc. and its stakeholders are precise. Fulfil all company safety training requirements. Customer site requirements. Filling CWX service-related documentation. Be able to exercise the stop work authority program. Travel required up to 15% of the time. Other duties may be assigned. III. Supervisory Responsibilities There are no supervisory responsibilities associated with this position.

Instrument Technician Inspects, tests, adjusts, and repairs electric, electronic, mechanical, and pneumatic instruments and systems utilized by production and manufacturing equipment to ensure adherence to established performance levels and product quality. RESPONSIBILITIES Inspects meters, indicators, and gauges to detect abnormal fluctuations. Tests accuracy of flow meters, pressure gauges, temperature indicators, controllers, radiation counters or detectors, and other recording, indicating or controlling instruments to locate defective components in system, using test equipment, such as pressure gauges, mercury manometers, potentiometers, pulse and signal generators, oscilloscopes, transistor curve tracers, and ammeters, voltmeters, and watt-meters. Traces out and tests electronic solid state and vacuum tube circuitry and components to locate defective parts in analog and digital, protection, or radiation monitoring systems, using test equipment, schematics, and maintenance manuals. Removes defective instruments from system, decontaminates, disassembles, and cleans instruments, and replaces defective parts, using hand tools. Reassembles instruments and replaces instruments in system, using hand tools. Lubricates instruments and replaces defective wiring and tubing. Calibrates readings on instruments according to standards and adjusts phasing and aligns stages to ensure accuracy of recording and indicating function. Records calibrations made, parts and components used, and inventory of parts on hand. Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments. Responsible for observing and complying with all safety and project rules. Performs other duties as required. Requirements TDLR 5+ years' experience Effective written and verbal communication Ability to pass a DISA Background Check Ability to pass DISA Drug Screen US Citizen or Legal Work Authorization PHYSICAL REQUIREMENTS Work in exposure to region weather (Heat/Cold/Rain). Work at heights without fear- possibly 150 ft or more Climb and Utilize ladders up to 20 ft in height Pick up and carry work materials- (possibly up to 50 lbs). Ability to use P.P.E. (personal protective equipment) Ability to hear and respond to audible emergency alarms and warnings

Company TSMC Arizona Corporation Posted Oct 20, 2025 A job at TSMC Arizona offers an opportunity to work at the most advanced semiconductor fab in the United States. TSMC Arizona's first fab will operate its leading-edge semiconductor process technology (N4 process), starting production in the first half of 2025. The second fab will utilize its leading-edge N3 and N2 process technology and be operational in 2028. The recently announced third fab will manufacture chips using 2nm or even more advanced process technology, with production starting by the end of the decade. America's leading technology companies are ready to rely on TSMC Arizona for the next generations of chips that will power the digital future. As an Construction Electrical Technician, you will demonstrate a strong sense of reliability and enthusiasm and will possess an attitude that embodies our core values - Integrity, Commitment, Innovation, and Customer Trust. By applying for this role, you also agree to be considered for other opportunities, including internships, co-ops, trainee, apprenticeship, Pioneer Program, or other positions (or level of position) that align with your qualifications. If your skills and experience are found to be a good match, we may consider you for additional opportunities. * All positions may require access to export controlled technical data. Non-U.S. Persons may require an export license. U.S. Persons include United States citizens, lawful permanent residents, and persons admitted to the United States as a refugee or asylee. Job Summary: The Construction Electrical Technician is responsible for assisting with or independently performing various electrical system installations, maintenance, and troubleshooting in an industrial or high-tech building environment. This role spans from basic material handling and installation support to independently executing complex electrical tasks, overseeing field work, and ensuring compliance with safety and quality standards. Responsibilities: * Material Handling & Preparation: Organize and prepare materials such as conduit, cable tray, wire spools, fittings, and electrical boxes. Assist with wire pulls and termination preparation. * Electrical System Installation: Assist with or independently install various conduit systems (EMT, PVC, RMC, flex). Install and secure junction boxes, panels, and equipment. Perform cable pulls, wire routing, and execute terminations at panels, junction boxes, and equipment. * Drawing Interpretation & Layout: Learn or skillfully interpret single-line diagrams, panel schedules, installation drawings, and control circuit diagrams. Perform layout and mark according to drawings and field measurements. * Safe & Tidy Work Practices: Strictly adhere to electrical safety guidelines, including Lockout/Tagout (LOTO), Personal Protective Equipment (PPE), and energized work limitations. Maintain a clean and organized work area, ensuring tools and materials are secure. Observe and learn safe and efficient techniques. * Quality Assurance & Documentation: Learn or perform torque procedures and document connections. Assist with daily progress reports, tagging of wires and equipment, and assist with redline markups and as-built verification. * Field Coordination & Leadership (for advanced levels): Coordinate with foremen, project management teams, and other trades to ensure smooth work progression. Oversee field installation work and provide guidance to junior technicians and apprentices. Minimum Qualifications/Requirements: * Education: High school diploma or equivalent. * Experience: Specific experience in electrical preferred. (Experience requirements will vary based on specific technician level hired for). * Technical Skills: * Possess basic mechanical aptitude and tool handling skills. * Understanding of electrical PPE, arc flash hazards, and proper tool usage. * Familiarity with wire types, insulation ratings, and color coding. * Knowledge of installation tolerances, bend radii, and conduit support spacing. * Ability to pass project-specific safety orientation and electrical hazard awareness training, as well as LOTO training. * (For advanced levels) Proficient in all phases of electrical system installation, possess an in-depth understanding of NEC standards and project electrical installation standards, and capable of reading complex electrical drawings (power, control, fire alarm, etc.). * Interpersonal Skills: * Ability to learn from drawings and observe layout markings. * High attention to detail and strict adherence to safe work habits. * (For advanced levels) Ability to lead small tasks and coordinate within a team. * Physical Requirements: Ability to move materials, work on ladders/lifts, and stand for extended periods. Shift Expectations: TSMC Arizona operates 24/7. This position requires candidates to be available and willing to work any shift (day or night) on a compressed work week schedule upon completion of training. The compressed work week schedule is 4 days on/3 days off one week and 3 days on/4 days off the following week. Shifts are 12 hours, from 6 AM to 6 PM or 6 PM to 6 AM. Application Consideration Consent: By applying for this position, I acknowledge and agree that my application and qualifications may be considered for other positions within the company. However, I reserve the right to withdraw my consent for future consideration for other positions within the company at any time. Candidates must be willing and able to work on-site at our facility in Phoenix, AZ. Benefits: As a valued member of the TSMC family, we place a significant focus on your health and well-being. When you are at your best-physically, mentally, and financially-our company thrives. TSMC offers a comprehensive and competitive benefits program that includes: * Medical, Dental, and Vision Plans: Choose the options that best fit your and your family's needs. * Income-Protection Programs: Financial assistance during injury or illness. * 401(k) Retirement Savings Plan: Secure your financial future with competitive employer contributions. * Paid Time-Off Programs and Holidays: Recharge and spend quality time with loved ones. Work Location: 5088 W. Innovation Circle, Phoenix, AZ 85083 TSMC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. We encourage all qualified individuals to apply and welcome applicants from diverse backgrounds and experiences. Candidates must be able to perform the essential duties of the position with or without reasonable accommodation. If you need assistance during the application process, please contact P_************. If hired for this position, you may be required to participate in and perform Emergency Response Team (ERT) duties as an essential part of the role. These duties may include responding to F21 incidents, such as medical emergencies, chemical spills, fire response, or addressing any other disruptions to business operations. If you are selected by your manager to become a part of ERT, participation is mandatory and additional compensation will be provided for performing these critical responsibilities in the form of a monthly premium. TSMC Arizona reserves the right to change or assign other duties to this position. All offers of employment are contingent upon successful completion of TSMC Arizona's pre-employment screening process. This process may include verifying the candidate's identity, confirming legal authorization to work at the provided job site location, educational background, and, where permitted by local regulations, a comprehensive background check. #LI-Onsite * *

Responsible for the maintenance, and repair of all instruments and control systems Responsible for maintenance and repair of electrical, electronic and pneumatic components on compressor units, generator units, and pump units. Inspects, calibrates, repairs, tests, adjusts, installs and removes all electronic equipment and systems. Inspect, repair and/or replace items such as instruments, valves, disconnects and starters Troubleshoot and make repairs on automatic valves, motor starters, Meg & test electrical motors, pneumatic and electronic instrumentation, electrical control panels, generator control panels, generators and switchgears Perform routine maintenance on electrical, pneumatic and mechanical devices using hand and power tools, electrical and electronic measuring and test devices, diagnostic equipment, vendor literature, technical manuals, blueprints and schematic diagrams Daily routine checks for obvious signs of Electrical and Instumentation failure - such as loose hanging wires, junction boxes, lighting, leaking tubing, and stuck shuttle valves. Familiar with Allen Bradley PLC's, Rosemont and Siemens transmitters, Versa valves, Westlock indicaters, and Fisher control valves 7/7 Schedule Venice, LA

Looking for experienced I&E Technician for Offshore & on land field service work. Must have experience with the following: 480VAC, 240/120VAC, 24VDC, 12VDC, Motors, MCC, NEC, GAI-Tronics, General Alarm, Lighting. Understanding of Hazardous Locations. Highly motivated, self-starter, with a Safety mindset. Must be willing to work on land as needed.

Job Description Thompson Engineering has a full-time opportunity for a Survey Instrument Technician. The Surveyor Instrument Technician provides support to the Surveyor Party Chief in the daily responsibilities of the land surveying department. This position is responsible for collecting survey data using designated survey equipment. Ideal candidates must be willing to travel to support project needs. Duties: Operates total station, digital and automatic level, Topcon data collector, TDS software. Collect data for field level notes which is reported to the Surveyor Party Chief. Assist in loading and unloading survey equipment from the company vehicle. Ability to travel and stay overnight based on the workload of the Survey Department. Conduct all work activities in compliance with Thompson Holdings, Inc. Health, Safety & Environmental Management System, safety policies & procedures, safety execution plans and Job Safety and Environmental Analyses. Attend and pro-actively participate in monthly safety meetings, project toolbox safety meetings and safety moments. On time and consistent attendance is required. Minimum Requirements Five (5) years verifiable experience in surveying commercial and/or heavy industrial construction stakeout. Must have working knowledge of GPS software using the Topcon Hyperlite. High school diploma or equivalent. Must have a valid Driver's License Must have a TWIC card Be able to read and comprehend measurements. Intermediate math skills which include trigonometry and coordinate geometry. Must be able to communicate effectively with others. Must be able to understand and follow verbal and written instructions. Ability to travel and stay overnight based on the workload of the Survey Department Physical Requirements Ability to work in the outside elements of the field up to 100% of the time. Must be able to lift a minimum of 50lbs. Required to remain standing for a minimum of eight (8) hours per day and walk long distances. Must be able to bend, stoop and climb on a ladder. Must be able to drive a company vehicle to and from job sites. About Thompson Engineering Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Type: Full Time, On-Site Who We Are: Southern Integrated Solutions and Consulting is a forward-thinking systems integration company offering an extensive range of services, products, and customized systems in sectors such as oil & gas, utilities, manufacturing, and mining. Our team composed of seasoned Electrical and Control Systems Engineers, Consultants, Project Managers, System Integrators, and I&E Technicians excel in Automation, SCADA, I&E Construction, Process Control, Safety Instrumented System Design, Safety Integrity Level Selection & Verification, Safety Lifecycle Modeling, Real-Time Data Collection, MCC & Switchgear Design, and Fabrication. Job Description: Southern Integrated Solutions and Consulting (SISC) is searching for an Electrical Technician. The ideal candidate for this position has a minimum of 3-5 years' electrical experience. The candidate under the general direction of the Companies Project Managers, Superintendents, and Foreman's will perform electrical, communications and electronic activities. The Electrical Technician plays a key role in executing ongoing facilities maintenance and capital improvement projects. The Electrical Technician performs and directs the apprentices assigned to them in the daily job duties and tasks and performs other project related duties as required. The Electrical Technician position requires physical labor on active job sites and involves working in various environmental conditions. PPE (Personal Protective Equipment) is mandatory on all job sites. If you are a motivated individual who is passionate about technology and enjoys working in a collaborative and fast-paced environment, we encourage you to apply. Responsibilities: Holds responsibility for direct supervision/coordination of assigned helper/apprentice electricians, on a per job basis Apply basic electrical and construction principles and practices to solve design, development and modification problems with parts, assemblies provided Fulfill daily commitments and stay on project schedule as directed by job-site foreman Report project specific information to the assigned superintendent or Foreman on scheduled basis Ensure the occupational health and safety of assigned employees in accordance with state and federal regulations, departmental and District policies, and industry standards and practices Inspects work in progress to assure compliance with applicable codes and standards, project specifications, and quality assurance procedures Keep job site clean before leaving and be kept clutter free during the work Trouble shoots most common electrical systems including, but not limited to, services, feeders, and branch circuits Measures, cuts, bends, threads, assemble, and installs electrical conduit Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels Connects power cables to equipment, such as electric range or motor, and installs grounding leads Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement Repairs faulty equipment or systems Qualifications: Education & Experience: High School Graduate or G.E.D 3-5 years' experience in industrial electrical industry Valid state motor vehicle operator's license & clear driving record to meet Company policy Hard Skills: Experience with using hand-tools and power tools. Skill or experience reading and interpreting diagrams such as technical drawings or blueprints. Knowledge of the National Electrical Code published by the National Fire Protection Association (NFPA). Soft Skills: Strong communication, problem solving, and critical thinking skills. High efficiency and time management skills. Exhibit a willingness to apply oneself, to learn, and to develop electrical skills Benefits: Competitive salary with performance-based bonuses. Comprehensive health, dental, and vision insurance with employer contributions. Paid short-term and long-term disability, and life insurance benefits. Voluntary benefits. Retirement savings plan with company match. Opportunities for professional development and continuing education.

PENDING CONTRACT AWARD Job Title: Electronic Technician III Task Description: ELECTRONIC TECHNICIAN III, BLS 17-3023, SCA 23183 Function: Applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes. Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower-level technicians. Required experience: Minimum of five (5) years' experience in avionics/electronics maintenance. Required education: High school diploma or General Education Degree (GED). Shall be a graduate from a two (2) year Electronics Technician resident course at an accredited institute. Compensation $44.64/hour Other Compensation Employees who elect to waive health insurance coverage may elect to receive an opt-out of $4.57 per hour for up to 40 hours per week. Proof of alternate coverage is required. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue bi-weekly from the first week of service 5.54216 hours of PTO. KAI employees at NAS JRB New Orleans, LA will have 11 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Company: INEOS Oxide Interested in joining a winning team? A team whose employees share in the ownership of the business and are empowered to make a difference? Organizational Context and Job Purpose INEOS Organization: INEOS is a global manufacturer of petrochemicals, specialty chemicals and oil products. It comprises 15 businesses each with a major chemical company heritage. Its production network spans 65 manufacturing facilities in 16 countries throughout the world. INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Its businesses produce the raw materials that are essential in the manufacture of a wide variety of goods: from paints to plastics, textiles to technology, and medicines to mobile phones - chemicals manufactured by INEOS enhance almost every aspect of modern life. Business Context Ethylene oxide (EO) is an important building block for the preparation of a wide variety of EO derivatives (EODs), including various surfactants, as well as a host of other chemical intermediates including Glycol Ethers, Polyethylene Glycols, Ethanolamines, and Alkyl Alkanolamines. INEOS Oxide is one of the world's leading producers of Ethylene Oxide (EO) and Ethylene Oxide Derivatives (EODs). We currently have a total EO and EOD capacity of 920 kta spread across five different production units throughout Europe and the US. These units have leading cost economics, due to economies of scale, state-of-the-art technology, strategic locations, etc. Our EO project in the US is targeting the fast-growing merchant EO market, building on our experience and leadership position in Europe. Purpose of the Job: The I&E Technician troubleshoots and maintains operating units to drive process and product improvements. During a typical day they will maintenance equipment, PM and troubleshoot equipment. Job Accountabilities SHE * Visibly commit to, follow, practice, support and promote the INEOS 20 Principles of Process and Behavioral Safety, the INEOS Life-Saving Rules, and the Culture of Prevention on a daily basis. * Maintain safety as the highest priority of the plant by adhering to and upholding all safety policies and standards. Stop work or the work of others as needed to address safety concerns. * Follow all necessary safety procedures and practices to isolate, clear, and work on plant equipment. * Perform all activities in accordance with established company, local, state, federal, and health safety, and environmental regulations and procedures. * Ensure all maintenance activities are planned and executed in accordance with site environmental requirements. * Identify safety improvements on all pre-existing processes. Communicate and report any deviations to job plans. * Verify clear understanding of work scope, carefully review the type of work and potential safety or process reliability hazards. * Take appropriate action to initiate proper safety reviews (e.g., temporary job plan, confined space, hot work, etc.) when reviewing the work scope. * Aware of and respond to emergency protocols during shutdowns and startups. * Work within the limit of competency and training. * Always take the asset to its safest state when in doubt. Manufacturing Excellence * Provide technical expertise in installation, acceptance testing, commissioning, proactive maintenance, troubleshooting, and repair of unit equipment. * Execute scheduled work and complete all documentation in a timely manner in accordance with company policies and procedures. * Monitor overall program compliance for integrity programs for the asset and coordinate craftsman as required to support these programs and ensure completion prior to due date. * Support maintenance of asset condition per INEOS Asset Care guidelines. * Coordinate with Asset Work Execution Supervisors on larger, more complex jobs including review of work scope with Operations, Execution Forces, Planner/Schedulers to verify clear understanding and development of timelines as needed. * Troubleshoot failed/underperforming equipment to identify and/or eliminate root cause. * Serve as elevated technical resource in maintenance repair techniques for the asset. * Provide support to engineering project teams that install, modify, or will affect IE&A equipment in the plant. * Follow the progress of the projects ensuring that the IE&A is installed correctly with all parameters being properly set for the desired operation. * Respond to tasks with the appropriate sense of urgency to minimize impact to process units. * Act as step up supervisor as needed. * Perform other or related duties as assigned. Skills/Competencies: Level of Education & Experience in general * High School Diploma/GED required. * Associate's degree from an accredited college or trade school, preferred. * Electrical and Instrumentation designation or NCCER Electrical and Instrumentation Certification, preferred. * Ability to achieve NCCER certification in at least one discipline within nine (9) months of employment. * At least 2 years of maintenance-related experience in a plant environment, preferred. * Possess a current, valid license to operate a motor vehicle in the United States. * Possess or able to obtain a Transportation Worker Identification Credential (TWIC). * Must be legally authorized to work in the United States on a permanent basis without visa sponsorship (U.S. citizen, U.S. Permanent Resident). Technical skills * Experience with SAP Plant Maintenance or other computerized maintenance management systems. * Working knowledge of Microsoft Office Suite tools. * Working knowledge of instrument, electrical, and analyzer standards as applied in petrochemical industry and general knowledge of various Codes (e.g. API, ASME, ANSI, NFPA, ISA). * Working knowledge of technical documentation associated with instrument, electrical, and analyzer design and equipment. * Demonstrated capabilities to assess work sequencing, optimize work planning, scheduling, and costing, preferred. * Knowledge and experience in executing preventive maintenance plans. * Demonstrated troubleshooting knowledge and analytical thinking skills using deductive reasoning, inductive reasoning, problem sensitivity, and information ordering. * Demonstrated finger dexterity to make precise coordinated finger movements on one or both hands to grasp, manipulate, or assemble small objects and demonstrated arm-hand steadiness. * Instrumentation Experience: * Knowledge of and experience with instrumentation installation, calibration, maintenance and troubleshooting, including the ability to read and understand P&IDs, schematics and loop drawings. Experience using HART communicator and documenting calibrator to verify settings of instruments in the field. * Knowledge of and experience with ladder logic, control valves, HART field devices, Emerson Delta V BPCS/SIS or related DCS platforms. Familiar with the maintenance of Safety Instrumented Systems (SIS). * Knowledge of instrumentation relating to temperature, pressure, mass flow and level. Includes DP, Coriolis, Vortex, Ultrasonic, Nuclear, Radar and Magnetic instrumentation, along with associated equipment such as control valves, pneumatic and electro-pneumatic instrumentation, and valves. * Perform normal periodic testing, calibration, and documentation of combustible gas detectors, ammonia detectors, pH and conductivity analyzer probes, and online TOC analyzers, online gas chromatographs. * Electrical Experience: * Knowledge of and experience of troubleshooting equipment with voltages of 15kVA and under. * Troubleshooting skills along with the ability to read and understand P&ID, Relay Drawings, Electrical One-Lines and Loop Drawings. * Knowledge of testing and maintenance of VFDs, transformers, large electric motors, UPS systems, low and medium voltage switchgear, low and medium voltage motor control centers, and cascade redundant UPS. Behavioral Skills * Ability to demonstrate a strong working knowledge of the process and personal safety and health practices applicable in the petrochemical industry. This includes energy isolation, lockout tagout, work permitting, confined space entry, working from heights, hazard communication, lifting and hoisting, incident reporting and investigation, and MOC. * Willing and able to wear required personal protective equipment, including fire protective clothing (FRC), goggles, face shields, gloves, steel-toed boots, hearing protection, respirators, etc., as required for the site, job, or task. * Willing and able to work in extreme weather conditions, elevated heights (up to 130 feet) by climbing stairs and vertical ladders), and noisy environments. * Willing and able to work with hazardous and/or flammable chemicals using proper safety precautions, training, and equipment. * Willing and able to provide overtime coverage and be available for plant callouts. * Willing and able to collaborate and contribute to a team setting. * Relentlessly pursue and leverage market insights to guide strategies and make superior choices. * Make courageous decisions to innovate and accelerate value creation. * Optimistically focus on continual growth - pursuing superior outcomes for business & customer success. * Have a bias for action, prioritizing issues and making sound decisions - appropriately accounting for uncertainty and risk. * Adapt to changing market and customer opportunities quickly to deliver results in the most effective way. * Instill trust and exemplify integrity. * Stop work or others work as needed for safety concerns. Environment/Context: The candidate is responsible for safe and efficient operation of assigned production units using established operating discipline and procedures. The I&E Technician is responsible for maintaining the plant assets and protective systems integrity and to deliver established production targets set by the business. ADA Physical requirements, Visual Acuity Requirements, and Environmental Conditions: Outside Light Work: Exerting up to 50 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or a negligible amount of force constantly to move objects * The worker is subject to inside environmental conditions: Protection from weather conditions, but not necessarily from temperature changes. * The worker is subject to outside environmental conditions: No effective protection from the weather. * The worker is subject to both environmental conditions: Activities occur inside and outside. * The worker is subject to extreme cold: Temperatures below 32 degrees F for periods of more than one hour. * The worker is subject to extreme heat: Temperatures above 100 degrees F for periods of more than one hour. * The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. * The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. * The worker is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: fumes, odors, dusts, mists, gases, or poor ventilation. * The worker is subject to oils: There is air and/or skin exposure to oils and other cutting fluids. * The worker is required to wear a respirator. * The worker is required to don a gas mask. Inside: * Sedentary Work: Exerting up to 50 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. * Subject to inside environmental conditions: Protection from weather conditions, but not necessarily from temperature changes * Vision: Employee must have the ability to see written documents, computer screens, and to adjust focus. * Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication and to make discriminations in sound. Performance indicators: * Achieve SHE metric targets for safety and environmental incidents. Zero incidents. * Meet or exceed plant production goals. * Meet or exceed production supply reliability. * AsCare, 20P, MOC/PSM, ISO compliance achieved. Zero incidents * Meet or exceed efficiency targets. >99% reliability * Completion of assigned action items. * Meet compliance with EPA, GMP, DOT, and all OSHA regulations. * Achieve plant department and personal metrics as defined in annual performance assessment. * Meet all department annual training goals. Our culture is one of honesty and integrity with an emphasis on safety, health and environmental performance. On our team, people are acknowledged for embracing new practices that help create real value for customers. Equal Employment Opportunity Statement INEOS Oxide is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability status, or protected veteran status. We strive to ensure equal opportunity for all employees and applicants and make hiring decisions based on qualifications, merit, and business needs. E-Verify INEOS Oxide participates in E-Verify. E-Verify is a system that allows employers to verify the employment eligibility of their employees in the U.S. All new hires at INEOS will be required to confirm their identity and employment authorization through E-Verify. Our culture is one of honesty and integrity with an emphasis on safety, health and environmental performance. On our team, people are acknowledged for embracing new practices that help create real value for customers.

Company:INEOS Oxide Interested in joining a winning team? A team whose employees share in the ownership of the business and are empowered to make a difference? Organizational Context and Job Purpose INEOS Organization: INEOS is a global manufacturer of petrochemicals, specialty chemicals and oil products. It comprises 15 businesses each with a major chemical company heritage. Its production network spans 65 manufacturing facilities in 16 countries throughout the world. INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Its businesses produce the raw materials that are essential in the manufacture of a wide variety of goods: from paints to plastics, textiles to technology, and medicines to mobile phones - chemicals manufactured by INEOS enhance almost every aspect of modern life. Business Context Ethylene oxide (EO) is an important building block for the preparation of a wide variety of EO derivatives (EODs), including various surfactants, as well as a host of other chemical intermediates including Glycol Ethers, Polyethylene Glycols, Ethanolamines, and Alkyl Alkanolamines. INEOS Oxide is one of the world's leading producers of Ethylene Oxide (EO) and Ethylene Oxide Derivatives (EODs). We currently have a total EO and EOD capacity of 920 kta spread across five different production units throughout Europe and the US. These units have leading cost economics, due to economies of scale, state-of-the-art technology, strategic locations, etc. Our EO project in the US is targeting the fast-growing merchant EO market, building on our experience and leadership position in Europe. Purpose of the Job: The I&E Technician troubleshoots and maintains operating units to drive process and product improvements. During a typical day they will maintenance equipment, PM and troubleshoot equipment. Job Accountabilities SHE Visibly commit to, follow, practice, support and promote the INEOS 20 Principles of Process and Behavioral Safety, the INEOS Life-Saving Rules, and the Culture of Prevention on a daily basis. Maintain safety as the highest priority of the plant by adhering to and upholding all safety policies and standards. Stop work or the work of others as needed to address safety concerns. Follow all necessary safety procedures and practices to isolate, clear, and work on plant equipment. Perform all activities in accordance with established company, local, state, federal, and health safety, and environmental regulations and procedures. Ensure all maintenance activities are planned and executed in accordance with site environmental requirements. Identify safety improvements on all pre-existing processes. Communicate and report any deviations to job plans. Verify clear understanding of work scope, carefully review the type of work and potential safety or process reliability hazards. Take appropriate action to initiate proper safety reviews (e.g., temporary job plan, confined space, hot work, etc.) when reviewing the work scope. Aware of and respond to emergency protocols during shutdowns and startups. Work within the limit of competency and training. Always take the asset to its safest state when in doubt. Manufacturing Excellence Provide technical expertise in installation, acceptance testing, commissioning, proactive maintenance, troubleshooting, and repair of unit equipment. Execute scheduled work and complete all documentation in a timely manner in accordance with company policies and procedures. Monitor overall program compliance for integrity programs for the asset and coordinate craftsman as required to support these programs and ensure completion prior to due date. Support maintenance of asset condition per INEOS Asset Care guidelines. Coordinate with Asset Work Execution Supervisors on larger, more complex jobs including review of work scope with Operations, Execution Forces, Planner/Schedulers to verify clear understanding and development of timelines as needed. Troubleshoot failed/underperforming equipment to identify and/or eliminate root cause. Serve as elevated technical resource in maintenance repair techniques for the asset. Provide support to engineering project teams that install, modify, or will affect IE&A equipment in the plant. Follow the progress of the projects ensuring that the IE&A is installed correctly with all parameters being properly set for the desired operation. Respond to tasks with the appropriate sense of urgency to minimize impact to process units. Act as step up supervisor as needed. Perform other or related duties as assigned. Skills/Competencies: Level of Education & Experience in general High School Diploma/GED required. Associate's degree from an accredited college or trade school, preferred. Electrical and Instrumentation designation or NCCER Electrical and Instrumentation Certification, preferred. Ability to achieve NCCER certification in at least one discipline within nine (9) months of employment. At least 2 years of maintenance-related experience in a plant environment, preferred. Possess a current, valid license to operate a motor vehicle in the United States. Possess or able to obtain a Transportation Worker Identification Credential (TWIC ). Must be legally authorized to work in the United States on a permanent basis without visa sponsorship (U.S. citizen, U.S. Permanent Resident). Technical skills Experience with SAP Plant Maintenance or other computerized maintenance management systems. Working knowledge of Microsoft Office Suite tools. Working knowledge of instrument, electrical, and analyzer standards as applied in petrochemical industry and general knowledge of various Codes (e.g. API, ASME, ANSI, NFPA, ISA). Working knowledge of technical documentation associated with instrument, electrical, and analyzer design and equipment. Demonstrated capabilities to assess work sequencing, optimize work planning, scheduling, and costing, preferred. Knowledge and experience in executing preventive maintenance plans. Demonstrated troubleshooting knowledge and analytical thinking skills using deductive reasoning, inductive reasoning, problem sensitivity, and information ordering. Demonstrated finger dexterity to make precise coordinated finger movements on one or both hands to grasp, manipulate, or assemble small objects and demonstrated arm-hand steadiness. Instrumentation Experience: Knowledge of and experience with instrumentation installation, calibration, maintenance and troubleshooting, including the ability to read and understand P&IDs, schematics and loop drawings. Experience using HART communicator and documenting calibrator to verify settings of instruments in the field. Knowledge of and experience with ladder logic, control valves, HART field devices, Emerson Delta V BPCS/SIS or related DCS platforms. Familiar with the maintenance of Safety Instrumented Systems (SIS). Knowledge of instrumentation relating to temperature, pressure, mass flow and level. Includes DP, Coriolis, Vortex, Ultrasonic, Nuclear, Radar and Magnetic instrumentation, along with associated equipment such as control valves, pneumatic and electro-pneumatic instrumentation, and valves. Perform normal periodic testing, calibration, and documentation of combustible gas detectors, ammonia detectors, pH and conductivity analyzer probes, and online TOC analyzers, online gas chromatographs. Electrical Experience: Knowledge of and experience of troubleshooting equipment with voltages of 15kVA and under. Troubleshooting skills along with the ability to read and understand P&ID, Relay Drawings, Electrical One-Lines and Loop Drawings. Knowledge of testing and maintenance of VFDs, transformers, large electric motors, UPS systems, low and medium voltage switchgear, low and medium voltage motor control centers, and cascade redundant UPS. Behavioral Skills Ability to demonstrate a strong working knowledge of the process and personal safety and health practices applicable in the petrochemical industry. This includes energy isolation, lockout tagout, work permitting, confined space entry, working from heights, hazard communication, lifting and hoisting, incident reporting and investigation, and MOC. Willing and able to wear required personal protective equipment, including fire protective clothing (FRC), goggles, face shields, gloves, steel-toed boots, hearing protection, respirators, etc., as required for the site, job, or task. Willing and able to work in extreme weather conditions, elevated heights (up to 130 feet) by climbing stairs and vertical ladders), and noisy environments. Willing and able to work with hazardous and/or flammable chemicals using proper safety precautions, training, and equipment. Willing and able to provide overtime coverage and be available for plant callouts. Willing and able to collaborate and contribute to a team setting. Relentlessly pursue and leverage market insights to guide strategies and make superior choices. Make courageous decisions to innovate and accelerate value creation. Optimistically focus on continual growth - pursuing superior outcomes for business & customer success. Have a bias for action, prioritizing issues and making sound decisions - appropriately accounting for uncertainty and risk. Adapt to changing market and customer opportunities quickly to deliver results in the most effective way. Instill trust and exemplify integrity. Stop work or others work as needed for safety concerns. Environment/Context: The candidate is responsible for safe and efficient operation of assigned production units using established operating discipline and procedures. The I&E Technician is responsible for maintaining the plant assets and protective systems integrity and to deliver established production targets set by the business. ADA Physical requirements, Visual Acuity Requirements, and Environmental Conditions: Outside Light Work: Exerting up to 50 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or a negligible amount of force constantly to move objects The worker is subject to inside environmental conditions: Protection from weather conditions, but not necessarily from temperature changes. The worker is subject to outside environmental conditions: No effective protection from the weather. The worker is subject to both environmental conditions: Activities occur inside and outside. The worker is subject to extreme cold: Temperatures below 32 degrees F for periods of more than one hour. The worker is subject to extreme heat: Temperatures above 100 degrees F for periods of more than one hour. The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: fumes, odors, dusts, mists, gases, or poor ventilation. The worker is subject to oils: There is air and/or skin exposure to oils and other cutting fluids. The worker is required to wear a respirator. The worker is required to don a gas mask. Inside: Sedentary Work: Exerting up to 50 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. Subject to inside environmental conditions: Protection from weather conditions, but not necessarily from temperature changes Vision: Employee must have the ability to see written documents, computer screens, and to adjust focus. Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication and to make discriminations in sound. Performance indicators: Achieve SHE metric targets for safety and environmental incidents. Zero incidents. Meet or exceed plant production goals. Meet or exceed production supply reliability. AsCare, 20P, MOC/PSM, ISO compliance achieved. Zero incidents Meet or exceed efficiency targets. >99% reliability Completion of assigned action items. Meet compliance with EPA, GMP, DOT, and all OSHA regulations. Achieve plant department and personal metrics as defined in annual performance assessment. Meet all department annual training goals. Our culture is one of honesty and integrity with an emphasis on safety, health and environmental performance. On our team, people are acknowledged for embracing new practices that help create real value for customers. Equal Employment Opportunity Statement INEOS Oxide is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability status, or protected veteran status. We strive to ensure equal opportunity for all employees and applicants and make hiring decisions based on qualifications, merit, and business needs. E-Verify INEOS Oxide participates in E-Verify. E-Verify is a system that allows employers to verify the employment eligibility of their employees in the U.S. All new hires at INEOS will be required to confirm their identity and employment authorization through E-Verify. Our culture is one of honesty and integrity with an emphasis on safety, health and environmental performance. On our team, people are acknowledged for embracing new practices that help create real value for customers.

Benefits: Competitive Wages Tools Provided Uniforms Provided Company Vehicle Paid Training Flexibility Career Advancement Opportunities Growing Industry Dental insurance Health insurance Paid time off Vision insurance Job Title: Access Control Technician Reports To: General Manager or Franchise Owner Key Areas of Responsibility: The Access Control Technician position is an integral part of the business and key to the growth of the company. All Access Control Technicians must have the ability to work well in a high-paced working environment. The individual must work well as part of the team and independently from the FlyLock owner. Requirements/Responsibilities Minimum of 2 years experience in technical hands-on field experience in security solutions, access control, door hardware, and other skilled trades. Inspects, installs, and services all basic and complex commercial and residential access and video systems. Performs advanced, complex troubleshooting and repair functions for commercial and residential access and video systems such as programming; cleaning detectors; testing controls and peripheral devices; mounting, replacing, and testing equipment according to specifications; running cable, etc. Instructs customers in access and video systems operation by recommending ways to use additional features and capabilities of system installations. Respond to customer questions and requests. Recommend corrective services to adjust customer complaints. Diffuses difficult and complex customer issues. Builds and maintains working relations with the sales staff. Defines the scope of add-ons and change orders, seeks customer approval, and writes up paperwork. Performs site visits with sales consultants for existing or potential clients. Takes responsibility for the project from first walk-through to final sign-off and hand-offs to service. Maintains accurate records of all inspections/service calls and troubleshooting as required including documentation and updating paperwork. Other duties as required by management. Nice to Have: Experience with systems mentioned below is useful but not all required. Access Control - Avigilon ACM, OpenPath / Avigilon Alta, Lenel, Brivo, PDK, ButterflyMX and Latch. CCTV - Avigilon Lock Hardware HES, Rutherford, Schlage, Allegion Brands, Assa Brands, SDC Controls, Lock Retrofit Kits, Magnetic Locks, Electrified Trim Sets, Electrified Crash Bars, Electrified Strikes, Electrified Handsets, Schlage NDE Physical Requirements: Must be able to fluently understand, speak, and write English. Ability to push, pull, and lift at least 50 lbs. Ability to kneel, crouch and stoop. Ability to reach above and below the shoulders. Ability to use hands and fingers to grasp, twist, and pull. Ability to climb a ladder and work above ground. Withstand external weather conditions year-round. Compensation: $45,000.00 - $65,000.00 per year The Flying Locksmiths and FlyLock Security Solutions franchise network of security specialists provide access control systems, commercial locksmith services and door security solutions nationwide. We blend traditional values with the latest advancements in technology to ensure our life safety and security solutions meet the precise needs of clients. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchise. All inquiries about employment at this franchise should be made directly to the franchise location, and not to FlyLock Security Solutions Corporate.

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Wellness resources MODULE X SOLUTIONS is a rapidly growing modular manufacturing business that serves marquee corporate and government customers in renewable energy, network infrastructure, battery storage, telecommunications, petrochemical, utility, transportation, and other verticals. We design, engineer, and manufacture products to our customers specifications. We are a proud Shreveport-based company working to support our employees and our community. Check us out at ************************ and we hope you will consider applying to build your career and future at MXS! JOB SUMMARY: Monday-Friday 5am-1:30pm (overtime is optional, not mandatory) As an ET1 you will be an integral part of our manufacturing team, responsible for assisting in the installation, maintenance, and repair of electrical systems and equipment. Under the guidance of experienced electricians, you will gain practical hands-on experience and develop the skills necessary to become a qualified electrician. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Assist in installing, maintaining, and repairing electrical systems and equipment in accordance with local and national electrical codes. Must be able to read a tape measure, terminate wires, use hand and power tools, and bend EMT and rigid conduit. Construct and fabricate parts using hand tools and specifications. Follow safety protocols and procedures to maintain a safe working environment. QUALIFICATIONS: Work Experience: 1+ years of experience installing and repairing equipment in the electrical field. Education: Highschool diploma/ GED or equivalent Related Experience: Willingness to learn and take directions from experienced electricians. Good communication skills and the ability to follow instructions. Able to meet deadlines, prioritize activities, and obtain information when needed. Strong attention to detail and problem-solving skills. Ability to work independently and as part of a team. APPRENTICESHIP PROGRAM: Module X Solutions partners with local schools to offer employees the option of attending an in-house apprenticeship program. This is an accredited program that takes 4 years to complete. An employee has the option to join and take advantage of this opportunity if they choose to. Upon completion of certain milestones, Module X Solutions will offer regular pay increases as the employee advances throughout the apprentice program. For Electrical Technicians that meet the Louisiana Licensing Board for Contractors licensing requirements, MXS will reimburse employees for the license renewal fee up to $100 per year, and the one-time testing application fee up to $120.

Essential Job Functions Maintenance Technicians perform work in assigned areas such as, but not limited to, electrical and instrumentation. An employee in this position may progress as training and abilities increase. Technicians are expected to perform the following duties with increasing levels of proficiency: Instrument Technician: Handles instrumentation work as assigned; repairs, troubleshoots, upgrades, and calibrates various equipment and devices used by Company as assigned Performs preventative maintenance on equipment, systems, piping, etc.; ensures availability of equipment; responds to operational needs as assigned; follows all maintenance procedures; updates procedures as applicable Troubleshoots, inspects and repairs equipment in accordance with manufacturer specifications; stays current on standards for mechanical equipment used Works with reliability engineering and other departments as necessary Requests material from warehouse for assigned work following Company procedures; performs or assists in performing inspections of delivered materials, parts and equipment when necessary Performs and assists in installation, modification and inspection work when applicable Acts as team leader to other technicians as required, assists team members as appropriate Coordinates and schedules repairs and projects with operations, planning and contractor personnel Assists with maintenance needs during pre-commissioning, commissioning, construction, and turn-arounds as directed Keeps equipment and tools organized and in good working condition; keeps work area clean Tracks maintenance activities utilizing computerized maintenance system; assists in establishing and maintaining filing system Maintains maintenance documents including, but not limited to, equipment numbers, maintenance performed and equipment condition; updates document control as required Communicates spare part needs; assists in establishing inventory levels necessary for equipment and assets in assigned area/s; provides specifications to inventory control personnel as requested Trains regularly on all Federal, state and local environmental regulations, requirements and guidelines including, but not limited to, RCRA requirements; follows and adheres to all guidelines, regulations, and requirements Assumes delegated responsibilities of Maintenance Foreman in his or her absence as requested Abides by all safety procedures and practices applicable to location and position; participates in appropriate safety training; demonstrates commitment to and support of EHSS principles and values; champions safety at all times; participates in and/or leads safety teams or projects as appropriate Performs other duties assigned by management that generally fall within the expected scope of this position Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This description reflects management's assignment of essential functions. It does not proscribe or restrict the tasks that may be assigned. Experience & KSA's Required Experience in plant operations, especially in petrochemical environment preferred Minimum of 3-5 years' experience in instrumentation in a petrochemical or similar industrial facility Ability to read, interpret and follow written job instructions and directions Knowledge of electrical codes, voltage, current, and power levels; experience working with single three phase electrical systems, power distribution systems, conduit and raceway installations Ability to read, interpret and follow manuals and other regulatory documents as applicable Ability to read and understand safety procedures, including OSHA standards and regulations Basic mathematical skills including addition, subtraction, multiplication, and division; ability to work with fractions and perform various mathematical conversions commonly used in petrochemical industry Understanding of general business concepts Must be able to work varying and/or rotating shifts Experience working with Federal, state and local environmental regulations including RCRA Ability to multi-task, prioritize, and follow through on assignments Good computer skills including Microsoft Office Suite; ability to use database systems and other programs and applications used by this position and at Company Fluent in English language including reading, writing and speaking; ability to read and write at a minimum of high school level; ability to clearly communicate to all levels in organization Education Requirement State license for instrumentation preferred Technology degree helpful Competencies All Company Core Competencies Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position requires an employee to be exposed to outside elements. Most extreme elements are heat in the summer months of up to 100°ree;+ and some exposure to cold of generally no less than 0°ree; in the winter months. There will be exposure to various chemicals and compounds, including fumes and smells, some of them hazardous. The employee will enter confined spaces and work in elevated environments. Employee must be able to wear PPE required by the location. Loud sounds and vibrations will be experienced at times. The noise level in the work environment is usually moderate. All environments are safe with appropriate PPE. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk (sometimes over long distances), crawl, sit, speak, and hear. The employee is required to stand, use hands to finger, handle, or feel; reach with hands and arms; the employee will be required to climb or balance, stoop, kneel, or crouch. The employee will be required to climb ladders and storage tanks up to 350' in height. The employee will be required to enter confined spaces and crawl under rail cars or trucks. The employee will lift and/or move up to fifty (50) pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. Employee may be required to travel by car, truck, rail, air, or other vehicles.

Job Title : I&C Technicians and Specialists FAQs It's that time again. We know it's probably the best job market there's been for I&C Professionals in the last 30 years, and it only looks to get better, so let's see if we can make a good argument on why we want the best and brightest, like you, to come work with us. For starters, everyone on our Team genuinely cares about the quality of work we do. Are we perfect? No, but we do understand the importance of working mistake -free is vital to the safety of the facilities we work in and goes hand in hand with our reputation. Do we know everything? Absolutely not, but we are not afraid to raise our hands and ask questions when in doubt. We also know no one on our Team will judge us, or you, for not knowing something, which means you get to work in an environment where you can actually build upon the knowledge you already have. Do Clients trust us? They do, and they do so because we do our best to be thorough and work hard to understand exactly what it is we are testing, and why and how. Does this mean our Team members get opportunities to perform work that someone may not get with another Contractor? In some instances, this is a true statement. Because we have earned the trust of many Clients, we are the go -to people. Do we pay well? In most instances, yes. Because we have set the bar high, we are able to pay our Team members higher than average in most cases. There are some contracts we have with Clients that have been in place for a while that have rates that have not kept up with the cost of living. So, sometimes we will be higher, and sometimes we won't, but we do try our best to pay Team Members well and we are always trying to improve our rates. Are we willing to train people? Yes, of course. We want people who want to kill us with questions. The future is yours to take. Are we willing to let you train us? Absolutely! If you can make our Team better, then we'll be your best students. What are we hiring for? We have Turnarounds and Projects from August of 2025 through the end of November 2025, and then Turnarounds and Projects in throughout 2026. Start and end dates vary by location, so it will really depend on your Technical Assessment that determines which site we think you'll fit in best at, as there are different needs at different sites. What does the compensation look like? Again, that depends on the results of the Technical Assessment and which site we think you are needed most at, but the pay will range from $64.00/hr. for I&C Technicians up to $80.00/hr. for I&C Specialists (DCS, SIS, Team Lead, Planning, Technical Support, etc.) Per diem ranges from $130/day to $150/day depending on the site. Travel Pay in and out is paid up to 8 hours of straight time from your legal address. What are the schedules like? Most jobs range from 6/10s to 7/12s, but no more than 13 days in a row without a day off. What's the process for applying and getting hired? The preferred way is to go straight here: https://rtfps.zohorecruit.com/jobs/Careers/**********00745003/I -C -Technicians -Specialists -Various -Sites?source=CareerSite OR, you can do the following: First - Email Olena at ******************* Second - Olena will reach out to you first to see if you are really interested. (She is located in Europe, so the time difference means she will be looking to speak to you from early morning to early afternoon.) Third - Olena will send you a link where you will review different categories of Instrumentation and Controls and choose between Novice, Competent, Proficient, or Expert. Fourth - We'll create an Assessment based on your answers, and you'll interview with one of the I&C Team Members. In other words, if you don't know anything about control valves, then there is no point in us asking you questions about control valves. Fifth - After the Assessment, we'll tell you where we think we need you most and from that point on, you'll always be called first when we have work that your skillset matches and you won't have to go through a new Assessment. FAQ's on the Assessment Do we accept the NCCER as a Technical Assessment? No, we do not. Do we accept the ISA CCST? Yes, we do. We still have an interview process, but it is much, much shorter. Can you get sample questions of what the Assessments look like? Yes, we can send you sample quizzes that are broken down into smaller subjects with 10 questions each. Can you tell me what some of the more generalized subjects are? Yes, here they are below: Instrumentation Maintenance & Troubleshooting: Perform routine inspections, calibrations, and functional checks on a comprehensive range of instrumentation: Flow Instruments: Ultrasonic (transit -time, doppler), magnetic, Coriolis, vortex, variable area, thermal mass, turbine, and DP -based flowmeters with primary flow elements (orifice plates, venturis, pitot tubes). Level Instruments: Radar (free -space, guided wave), magnetostrictive, displacer level transmitters, capacitance, ultrasonic, DP level, and float -based systems. Pressure Instruments: Pressure transmitters, pneumatic and electronic pressure switches, differential pressure transmitters, and pressure gauges. Temperature Instruments: RTDs, thermocouples, thermowells, infrared sensors, bimetallic thermometers, and fiber -optic temperature measurement devices. Analytical Instruments: pH, conductivity, oxygen analyzers, moisture analyzers, dew point analyzers, gas analyzers, continuous emission monitors, and process gas chromatographs. Vibration Instruments: Accelerometers, velocity probes, eddy -current displacement sensors, and portable vibration analyzers for rotating machinery health monitoring. Control Valves & Final Control Elements: Test and troubleshoot a variety of control valves (rotary, butterfly, globe, gate, ball) and associated components, including solenoids, limit switches, position transmitters, I/P converters, positioners, volume tanks, and valve actuators (pneumatic, hydraulic, electric). Ensure reliable operation, accurate positioning, proper fail -safe modes, and tight control to support stable process conditions. Signal Types & Communication Protocols: Work with both analog (4 -20 mA, 1 -5 VDC) and digital communication protocols (HART, Foundation Fieldbus, Modbus, DeviceNet, Profibus). Troubleshoot and maintain wireless instrumentation solutions (e.g., WirelessHART, Bluetooth) to ensure secure, reliable data transmission in real -time operating units. Interpret Documentation Be able to walk through a P&ID, Loop Drawing, and Motor Control Schematic. What kinds of questions are on the quiz or in the interview? Understanding the theory of operation of the instrumentation listed, understanding correct installations and applications of the listed instrumentation, being able to test and troubleshoot listed instrumentation, being able to do simple calculations and most importantly, understanding when and how to apply these calculations.

Wiring Telecom Technician DEPARTMENT: IT REPORTS TO: IT Manager FLSA STATUS: Hourly/Non-Exempt ASM Global, the leader in privately managed public assembly facilities, has an excellent and immediate opening for a Wiring Telecom Technician for ASM Global/Mercedes-Benz Superdome | Smoothie King Center | Champions Square. Essential Duties and Responsibilities Troubleshoot telephone and data lines Run CAT6 data cable and terminate and test Set out telephones and data lines for events Provide maintenance on various telephone closets and enclosures Maintain organization and cleanliness in telephone/IT rooms Track inventory of telephone and wiring and related supplies Assist IT and Telecom Techs as necessary All other duties as assigned Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must successfully pass a criminal background check Must be at least 18 years of age Knowledge of telephone systems and simple data systems is a plus Must be able to carry ladders and boxes of data wire Able to work nights, weekends, and holidays as needed Education and/or Experience High School diploma or equivalent, college preferred 1-3 years of working experience within telephone and data wiring preferred Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to move around the facility; to stand for long hours during events; talk and hear. This position may require work inside or outside of the building, as needed by events. Note The essential responsibilities of this position are described under the headings above. They may be subject to change at any time due to reasonable accommodation or other reasons. Also, this document in no way states or implies that these are the only duties to be performed by the employee occupying this position. ASM Global is an Equal Opportunity/Affirmative Action employer, and encourages Women, Minorities, Individuals with Disabilities, and protected Veterans to apply. VEVRAA Federal Contractor.