Electronics technician jobs in New Mexico - 304 jobs

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. This position will perform installation, maintenance, calibration, troubleshooting, repairs, and system development for all systems including motor controls, distributive controls, PLC's, communications systems such as satellite, cellular, RF systems, SCADA operations maintenance and any other technical issues that may arise. KEY RESPONSIBILITIES: Provides I & E (instrumentation and electrical) support for assigned assets such as pipelines, compressor stations, and LACT units. Installs, inspects, troubleshoots, maintains, repairs, and calibrates wide variety of midstream instrumentation such as, but not limited to, flow meters, transmitters, sensors, analyzers, data loggers, programmable logic controller (PLCs), distributive control system (DCS). Installs, inspects, troubleshoots, maintains, and repairs electrical equipment such as, but not limited to, motor control centers, generators, transformers, switches, relays, wiring, electrical signal and communication systems, variable frequency drive (VFD), power distribution center (PDCs), uninterrupted power source (UPS). Configures and programs industrial control systems. Performs loops checks, point-to-point verification, and other testing regimes. Maintains complete, accurate and regulatory-compliant documentation. EDUCATION AND EXPERIENCE: High school diploma or GED required Valid driver's license required Must be able to pass drug test and background check Must be able to work 12-hour shifts including nights, weekends, and holidays SKILLS: Calibration: Develops ability to perform calibration on instruments with accuracy and precision in accordance with established procedures. Aware of environmental factors such as temperature, vibration, noise affecting calibration. Computerized Maintenance Management System (CMMS): Develops experience with software package with multiple maintenance functionalities such as equipment data management, preventative maintenance, work order system, scheduling planning, inventory control, asset tracking. Electrical Equipment & Electrical Distribution Network: Develops knowledge and practice experience with electrical components and workings of electric transmission and distribution network. Industrial Control Systems: Develops knowledge or and practical experience with devices to manage, command, direct or regulate behavior of other devices or systems. Includes, but not limited to, Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS), Programmable Logic Controllers (PLC). Industrial Instrumentation Fundamentals: Develops practical knowledge of instrumentation used in midstream industry to measure, monitor, or control temperature, level, pressure, flow. Includes, but is not limited to temperature sensor, pressure gauges, pressure transmitter, pressure switch, flow transmitter, temperature controllers. Safety: Applies in difficult or complex situations ability to recognize safety risks in operational activities and use appropriate measures to control and manage identified risks. Safety Awareness: Ability to recognize and identify potential hazards. Evaluates changes in work environment with respect to impact on safety of self and others. Understands potential threats created by deviation from safety procedures and improper use of tools and equipment. Uses personal protection equipment. Uses tools and equipment in compliance with manuals and training. Calls attention to potential and actual hazardous conditions as they arise. Demonstrates knowledge of lockout/tag out procedures. Stops work if there are unsafe working conditions. Wireless Technologies: Develops knowledge of and practical experience with technologies and devices used in industrial applications to communicate information gathered from sensor locations through wireless links. #GP #GPOPS As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Bloomfield, New Mexico Additional locations: Job Requisition ID: 00019941 Location Address: 111 Road 4990 Education: High School (Required) Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a skilled Electromechanical Technologist to join our team. In this role, you will play a crucial part in the design, implementation, and maintenance of data acquisition and control systems. Your expertise will help ensure the reliability and efficiency of our operations, contributing to the overall success of our projects. You will collaborate with cross-functional teams to identify and address technical challenges, fostering a culture of innovation and continuous improvement. On any given day, you may be called on to: * Provide designs, controls, and engineering support for data acquisition and control systems. * Conduct testing and oversight of existing data acquisition and control systems. * Maintain data acquisition and control systems software and hardware. * Implement software data analytics routines into programs for non-technical operators. * Assist with the implementation and commissioning of contractor-supplied software into current and future operations control and data acquisition systems. * Troubleshoot problems and implement workable solutions as required. Due to the nature of the role, this candidate must be able to work onsite. Salary Range $72,800 - $140,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * High school diploma or higher degree plus three (3) or more years of related experience * Experience in operating and set up of oscilloscopes and soldering and/or standard electrical engineering measurement and test equipment such as power meters/sensors, and signal/waveform generators * Able to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire * Current Certified LabView developer (LCD) accreditation from National Instruments * Electromagnetic Impulse troubleshooting skills, control circuit theory and design * Experience with network analyzers and spectrum analyzers * Demonstration of at least one LabView controls/data acquisition project (minimum of 100 vi s) from inception to completion to include final documentation. * Demonstrated experience creating, storing and retrieving software from repository systems (i.e. GitHub or Sub-Version). * Experimental RF systems experience (theory/troubleshooting/maintenance). * Strong technical writing skills and the ability to prepare effective documentation. * Ability to work on programs that require adherence to standards and requirements. * Excellent interpersonal and communication skills as well as personal initiative, responsiveness, attention to detail and organization skills to handle multiple tasks and deadlines. * Willingness to tackle problems in a highly collaborative environment. * Ability to meet challenging design requirements and deliver results while meeting timelines within cost, schedule, and performance. * Active DOE Q-Level security clearance. About Our Team The Above Ground Testing (AGT) Accelerator Operations (1332) department is responsible for the operation of the Saturn, HERMES III, and SPHINX pulsed power accelerators. The primary objective of the department is to provide an applied research environment for the study of radiation effects on materials and electronics. The three accelerators generate electrical pulses of up to 20 million Volts and up to 12 million Amperes with nanosecond duration in order to create extremely intense pulsed radiation environments for the study of radiation effects sciences. Department 1332 also conducts pulsed power research and development to: improve radiation source fidelity, increase the output and fluence, as well as to improve the overall reliability and reproducibility of the accelerators. These unique, world class facilities are an essential part of the NNSA s Stockpile Stewardship Program. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Essential Functions If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Position Information This Limited Term Employee (LTE) position is a temporary position for one year term, which may be renewed at Sandia's discretion up to a maximum of seven years. Individuals in LTE positions may bid on regular Sandia positions as internal candidates, and in some cases may be converted to regular career positions during their term if warranted by ongoing operational needs, continuing availability of funds, and satisfactory job performance. Apply for Job * Careers * Sign In * New User

Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. SSummary: This position is responsible for operating and maintaining, modifying and performing routine and emergency repairs on all electrical/electronics and associated mechanical equipment in assigned area. Essential Duties and Responsibilities: * Takes immediate measures in emergency situations to protect the safety of the public and the company's assets. * Performs physical labor related to maintenance of large pumps, motors, and valves. * Follows established procedures for lock-out/tag-out to assure safety. * Maintains, make repairs to and operate equipment for pump stations, pipeline control centers, product terminals and related facilities. * Assist with the operation and evaluation of cathodic protection systems. * Assists in the construction and modification of facilities. * Informs and enforces company rules and regulations on outside pipeline companies and contractors. * Works weekends and respond to 24-hour on call. * Ensures compliance with federal and state regulations. Reduces potential risk to public safety and environment and minimizes company liability. Required Education: High School Diploma or equivalent required. Bachelor's degree or graduate of a technical school preferred. Minimum Requirements: * 0 - 5 years of related experience. * One year of related experience preferred. * Knowledge of systems including: Allen Bradley equipment, Omni flow computers, John Zinc systems, Factory Talk software, Siemens equipment and Systronics systems preferred * Motor Operated Valve (MOV) calibration and repair experience preferred * Tubing and fitting installation and repair experience preferred * Calibration and repair of temperature, level, pressure, meter and prover instrumentation experience preferred * Has working knowledge of medium and low voltage systems. (480VAC) High power system experience is advantageous * Valid driver's license and clean driving history required. * Eligibility to acquire/hold a valid TWIC card required. * Excellent verbal and written communication skills * Excellent PC skills, with proficiency in Microsoft products * Strong attention to detail, with the ability to independently proof work for accuracy * Ability to be alert and drive excessive miles daily * Ability to manage time and scheduling to meet appropriate deadlines * Ability to work successfully in stressful situations and manage multiple tasks * Ability to use awareness of relationships and impacts of data trends and elements to appropriately recommend actions that impact both near and long-term company operations and profits * Ability to independently conduct job accountabilities * Ability to take directions from supervisors * Ability to work independently with limited supervision * Ability to plan activities with a weekly to monthly time horizon required Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Climbing at least 60 feet on stairs at least a few times per week. * Climbing at least 7 to 11 feet on ladders or scaffolding at least a few times per month. * Lifting objects weighing up to 50 lbs. at least a few times a week, with the expectations that an employee can lift up to 100 lbs. with assistance, when needed. * Carrying objects weighing up to 25 lbs. for up to 50 feet on a weekly basis. * Walking 100 yards or more over 10 times throughout the day, with the expectations that employees could walk regularly up to 300 yards at a time for a total of 2 miles or more during a shift. * Walking on steep inclines for up to 15 minutes at a time. * Working in a crouching position several times per day for up to an hour at a time. * Bending and stooping several times per day for up to 30 minutes at a time. * Bending and twisting for up to 30 minutes at a time, including manually digging with shovels. * Standing in one place for up to an hour at a time. * Sitting for up to two hours at a time. * Ability to wear all appropriate personal protection equipment, such as safety shoes, safety glasses, hard hat, flame-resistant clothing, hearing protection, respirator/breathing apparatus, and/or fall protection, as required by the job activities. * Ability to use or operate the hand tools, power tools, precision tools, measurement devices and other tools or equipment required by the job activities.

Student Intermediate Level Requisition IDreq35391 Working TitleGJ Radio Tech Pay$15.00 Hourly CampusMain - Albuquerque, NM DepartmentOff Campus Work Study (454F) Employment TypeStudent Employment Student Type StatusNon-Exempt Background Check RequiredNo For Best Consideration Date1/5/2026 Organization: Generation Justice Location: Onate Hall, Room 220 University of New Mexico An Off-Campus Work-Study Position - MUST have a Work-Study Award About us: Generation Justice's (GJ) mission is to inspire youth to become multidimensional leaders who are committed to social transformation. GJ is a multiracial, multicultural project that trains youth to harness the power of community and raise critical consciousness through leadership development, civic engagement, media production, and narrative shift in the following areas - racial justice, health, education, early childhood development, and economic security. GJ has been recognized as the premier youth media/leadership group and has been the recipient of numerous awards locally and nationally. We produce an hour-long radio production each week that airs on 89.9 KUNM FM on Sundays at 7 PM. We are seeking an energetic, driven, social justice-oriented person who will assist with radio pre and post-production tasks including scriptwriting, hosting, and interviewing, among other production tasks. Working closely with the GJ Director and Associate Producer this position will help you build your communication, writing, and journalistic skills. This team player will have exceptional organizational skills. RESPONSIBILITIES Radio Tech/ Assistant Producer: ● Assist with Scriptwriting ● Assist with pre and post production of hour long radio productions ● Have great time management ● Helping gather information to prepare for GJ interviews (Bios, background, history) ● Select and program music relevant to the radio programs ● Assist with pre-production listening to radio segments ● Start to edit content ● Occasionally Conduct radio interviews ● Occasionally Host radio programs with other team members Other duties as required for the mission of Generation Justice. Minimum Qualifications Equivalencies not found for this position Preferred Qualifications QUALIFICATIONS: ● Personal qualities of integrity, credibility, and commitment to the GJ mission ● Must qualify for work-study ● Fluency with Google Suite ● Available 8-15 hours per week ● Must be able to work with a team and work collaboratively ● Must be a great communicator and be able to take guidance and follow directions ● Must like music and be open to sharing new music including local artists with audience ● Must be very organized and be good at planning Application Instructions Only applications submitted through the official UNMJobs site will be accepted. If you are viewing this job advertisement on a 3rd party site, please visit UNMJobs to submit an application. Please submit a Cover Letter and Resume. MUST have a Work-Study Award. The University of New Mexico is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, disability, or any other protected class.

Engineering Technician - Surveyor (235) Requisition ID **235** - Posted - **WO-EN Geotech & Mining** - **Carlsbad, NM, US - WIPP Site** - **Engineering**  **Be part of the nation's only repository for the disposal of nuclear waste known as Transuranic (TRU) waste.** Salado Isolation Mining Contractors, LLC (SIMCO), managing and operating contractor of the Waste Isolation Pilot Plant (WIPP) is currently seeking a qualified individual to serve as a **_Engineering Technician - Surveyor_** and join our team located in Carlsbad, New Mexico. This is a USW bargaining unit position. This position will be filled with SIMCO USW membership first in accordance with the Collective Bargaining Agreement before any other candidate considerations. **Responsibilities** The successful candidate will be responsible to collect geotechnical instrumentation and field data in the WIPP underground, process that same data using computer and database systems, fabricate and install instrumentation, and assist engineers and technical professionals in data collection and processing. The candidate will support underground openings inspections, identification of potential ground condition hazards and mitigation of these hazards. Candidates must be able to walk on even and uneven surfaces; climb ladders, steps and inclines; qualify to work underground; accurately read dials and gauges; follow procedures; properly and accurately record readings; and be capable of operating computers and maintain computer databases. Candidate must be able to qualify to operate diesel and electrical lift equipment and able to lift up to 20 pounds and perform overhead work; such as drilling, survey laser alignments, alignment point installations, and instrument and cable installations. Use of Theodolite, survey levels, and electronic distance measurement devices. Must be able to qualify to work underground and in radiological contaminated areas. **Minimum Requirements** _These requirements must be met to be considered for this posting. Uploaded resumes and completed applications are the means of determination._ + High School Graduate or Equivalency is required. + Two (2) years underground experience with successful completion of a competency test in basic math is required. _Must be at least 18 years of age; U.S. citizenship is required except in limited circumstances. See DOE Order 472.2 for additional information._ **What We Offer** + Medical, dental and vision insurance + Coverage on date of hire + Surgical concierge service + EAP services including wellness plans, estate planning, financial counseling and more + Shuttle commuter service from the local areas + Paid time off (PTO) and paid holidays + Tuition reimbursement program + On-site fitness center and other wellness support including some public gym membership reductions + Company paid short term disability + Company paid life insurance (1x annual salary) + Pension plan that provides monthly annuity after retirement and 401(k) with .50 matching up to 6% + Voluntary benefits of: + Accident, Critical Illness, and Hospital Indemnity + Long-term disability program. + Health and Flexible savings accounts + Life and accidental death and dismemberment insurance Trainee pay rate is $36.86 per hour. After all standard qualifications have been met and are maintained, the rate of pay is $47.42 with an annual increase in August to $48.61 (2026) per the CBA. **Equal Opportunity** _Equal employment opportunity, including veterans and individuals with disabilities._ _If you are an applicant with a disability who requires a reasonable accommodation to complete any part of the application process or are limited in the ability-or unable to use-the online application system and need an alternative method for applying, you may contact ************** or email *************************** for assistance. Upon receipt of this information, we will respond to you promptly to obtain more information about your request._ _Reviews, and tests for the absence of any illegal drug as defined in 10 CFR 707.4, will be conducted by SIMCO and a background investigation by the Federal government may be required to obtain an access authorization prior to employment, and subsequent reinvestigations may be required._ _Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the posting date. SIMCO reserves the right to extend the posting date at any time._ EOE including Disability/Protected Veterans. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

We are a (rad hard) team of builders, breakers, and fixers - delivering pulsed-power systems to accelerate the world's transition to fusion. Customers span defense, energy, and aerospace; our pulsed-power platforms (e.g., TITAN, Z-STAR) support nuclear effects testing now and fusion plants tomorrow. About the Role You will be responsible for the assembly, wiring and plumbing on electromechanical systems. Systems include vacuum, power generation, pulse forming section and oil system. You must be able to read mechanical and electrical drawings to be able to assemble, field and troubleshoot these complex systems. Job Requirements Assemble racks, HV/LV harnesses, enclosures, panels, and motion/actuation subsystems. Install pumps, valves, seals, gauges; leak-check and maintain oil and vacuum systems. Mount sensors, route signal cabling, and bring up data acquisition system (DAS)-oscilloscopes, probes, DMMs, and troubleshoot connection issues. Read schematics and harness drawings; crimp/terminate to specification; label, route and document work. Run electrical checkouts, resolve system noise, troubleshoot high voltage (HV) systems, and restore electromechanical systems to operational status. Preventive/corrective maintenance, spares, calibration, and readiness of tools and materials. Responsible for calibration of oscilloscopes, power supplies, etc.- Execute HV/LOTO, ESD, rigging, and lift plans, proper use of PPE; maintain clear and concise safety records. Capture build notes, monitor/maintain electromechanical systems, and feed improvements back to engineering. Minimum Requirements 3-7+ years experience building and integrating complex electromechanical systems (emphasis in pulsed power). Mastery of hand tools and metrology; expertise in electrical wiring and safety. Experience working with high voltage/high current systems and precision timing of operations. Ability to read mechanical design drawings and electrical/wiring diagrams and can provide improvement feedback to design teams. Enhanced knowledge and operation of oscilloscopes, HV probes, leak detectors, electrical testers; working knowledge of ESD mitigation is required. Clear and concise communication with operations crew and engineering team; ability to concisely document technical data and decisions. Desired Skills Pulsed-power familiarity, ability to solder and build cables Cleanliness/contamination control experience. Machining/rapid-fab familiarity; basic CAD or ECAD experience. Forklift/overhead crane, rigging, and safe lifting certs.

Apply Supervisory Petroleum Engineering Technician Department of the Interior Bureau of Land Management Farmington Field Office - Inspection & Enforcement Branch Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply Summary Explore a new career with the BLM - where our people are our most precious resource. This position is located with the New Mexico Bureau of Land Management, Farmington Field Office within the Inspection and Enforcement Branch located in Farmington, New Mexico. Information about Farmington, New Mexico and the surrounding area can be found at ****************** We expect to fill one vacancy at this time; however, additional positions may be filled from this announcement if they become available. Summary Explore a new career with the BLM - where our people are our most precious resource. This position is located with the New Mexico Bureau of Land Management, Farmington Field Office within the Inspection and Enforcement Branch located in Farmington, New Mexico. Information about Farmington, New Mexico and the surrounding area can be found at ****************** We expect to fill one vacancy at this time; however, additional positions may be filled from this announcement if they become available. Overview Help Accepting applications Open & closing dates 01/08/2026 to 01/28/2026 Salary $89,508 to - $116,362 per year Pay scale & grade GS 12 Location 1 vacancy in the following location: Farmington, NM Remote job No Telework eligible Yes-as determined by the agency policy. Travel Required 25% or less - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Permanent Work schedule Full-time Service Competitive Promotion potential None Job family (Series) * 0802 Engineering Technical Supervisory status Yes Security clearance Not Required Drug test No Position sensitivity and risk High Risk (HR) Trust determination process * Credentialing * Suitability/Fitness Financial disclosure Yes Bargaining unit status No Announcement number NMMP-26-12841587-MBA Control number 853849700 This job is open to Help Internal to an agency Current federal employees of the hiring agency that posted the job announcement. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Land and base management Current or former employees of a base management agency. Clarification from the agency Current career/career-conditional Bureau of Land Management (BLM) employees; Land Management Workforce Flexibility Act (LMWFA); CTAP eligibles within the local commuting area may apply. Duties Help * Oversee and perform inspections of oil and gas leases to enforce all appropriate laws, rules, and regulations as well as the terms and conditions specified in the various approvals. * Perform complex and responsible petroleum engineering technician work involving all aspects of drilling and production inspection and enforcement activities. * Responsible for the technical and administrative supervision of professional, technical, clerical and administrative positions to carry out the mission of the organization. * Responsible for programming and annual budgeting submissions and ensures program accomplishments are within budget allocations. Requirements Help Conditions of employment * U.S. Citizenship is required. * You cannot hold an active real estate license, nor can you have an interest or hold stocks in firms with interest in Federal Lands. * If you are a new employee or supervisor in the Federal government, you will be required to complete a one-year probationary period. * Selectee may be allowed to telework with supervisor approval. * An applicant appointed to this position must possess (or obtain within 30 days of entrance on duty) and maintain a valid state driver's license while employed in the position. * Must have a US Government Motor Vehicle Operator's Identification Card. * Must be able to operate 4-wheel drive vehicles in order to perform site inspections. * PET POSITIONS ONLY-0802: You must successfully complete the BLM Petroleum Engineering Technician (PET) Certification Program and continue service in the Federal Government for 2 years from the date of obtaining PET certification. * If selected for this position, you will be required to annually complete a Confidential Financial Disclosure Report, OGE-450 within 30 days of reporting to duty. * Your resume must contain enough information to show that you meet the qualification requirements as defined in the announcement. Only the first two pages of the resume will be used to determine eligibility/qualifications. * Be sure to read the "How to Apply" and "Required Documents" sections. * Appointment will be subject to a favorably adjudicated background/suitability investigation/determination. * Supervisory Probationary Period: If you are selected for this position, you will be required to serve a one-year supervisory probationary period if one has not previously been completed. * May require a one-year probationary period. * Direct Deposit Required. * This position requires regular and recurring overtime. Qualifications In order to qualify, you must meet the Specialized Experience Requirement AND the Selective Factors described below. Your resume must clearly describe your relevant experience, and you must provide a copy of the required PET certification. Selective Placement Factors: This position requires a special qualification that has been determined to be essential to perform the duties and will be used as a screen out element. Those who do not provide evidence they possess the following selective factor(s) will be rated not qualified: * This position performs the supervision and regulation of oil and gas operations under the lease agreements program on Federal and Indian lands and complex and responsible petroleum engineering technician work involving all aspects of drilling and production inspection and enforcement activities. You must be certified as a Petroleum Engineering Technician (PET). Candidates who do not meet this requirement by the close of this announcement will receive no further consideration for this position. * Driver's License: Possess a valid, current, State driver's license or be able to obtain prior to entrance on duty. In order to be rated as qualified for this position, we must be able to determine that you meet the qualification requirements - please be sure to include this information in your resume. No assumptions will be made about your experience. ?You must possess one (1) full year of specialized experience at or equivalent to the GS-11 level that is equivalent in difficulty and complexity as indicated by the following examples:? well-drilling, well-drilling procedures, production of oil and gas, and processes, methods, and equipment utilized by the petroleum industry in the offshore exploration and development of oil and gas resources in order to resolve difficult issues. Applicants must also have one full year of specialized experience performing at least 4 of the following duties: (1) performing on-site inspections of all phases of oil and gas drilling operations and facilities; (2) making recommendations for budget adjustments; (3) witnessing casing and cementing operations; (4) inspecting complex production facilities; and (5) inspecting or witnessing plugging and abandonment operations. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. You must meet all qualification and eligibility requirements by the closing date of the announcement. IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC, WE MAY NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Federal employees in the competitive service are also subject to the Time-In-Grade requirement in accordance with 5 CFR 300.604. If you are a current Federal employee in the General Schedule (GS) pay plan and applying for a promotion opportunity, you must have completed a minimum of 52 weeks at the next lower grade level. Physical Demands: On-site inspection work requires almost continuous physical activity. Most of the on-site inspection time is spent walking, standing, crouching, and climbing. In climbing up and down ladders and steep stairways, the PET is protected from falls only by firmly grasping on ladder rungs and hand railings. The PET may be required to hike into unusually rugged areas to inspect abandoned sites. PETs are subject to call 24 hours a day and may be required to work long nonstop tours-of-duty, occasionally in excess of thirty (30) hours. Some work is sedentary, although much of the job requires overnight field trips which involve physical activity on irregular terrains and work at physically demanding job sites. Working Conditions: This position requires working primarily in field locations where it is necessary to wear appropriate safety equipment. Work environment involves exposure to extreme weather conditions, hostile flora and fauna, hazardous explosive fumes, poisonous gasses, toxic chemicals, high frequency noises, high-pressure and high temperature equipment, detonating devices, and moving machinery. Work involves climbing up and down ladders and steep stairways. A large part of the time is spent driving to work sites that are located in isolated areas. This work environment requires the use of hard hats, hard-toe boots, safety glasses, ear protection equipment, poisonous gas detection equipment, and cold weather gear and/or a respirator may also be required. The PET must walk under and around heavy derrick and hoisting equipment and piping and around other potentially hazardous operating equipment. Education There is no substitution of education for experience at the GS-12 grade level of this announcement. Additional information * DOI uses E-Verify to confirm employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit E-Verify. * Career Transition Assistance Plan (CTAP): This program applies to employees who have been involuntarily separated from a Federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority, you must: 1) meet CTAP eligibility criteria; 2) be rated well qualified for the position with a score of 90 or above; and 3) submit the appropriate documentation to support your CTAP eligibility. For more information: CTAP * Males born after 12/31/59 must be registered for Selective Service * Travel and relocation expenses will not be paid by the Department of the Interior. Any travel, transportation and relocation expenses associated with reporting for duty in this position will be the responsibility of the selected employee. * The official worksite for the selectee is in the duty station identified in this vacancy announcement. The selectee may be allowed to telework with supervisor approval. * You may be required to travel overnight away from home up to 10 nights per month. You must obtain a government charge card for travel purposes. * Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. If eligible and qualified, you may be offered a recruitment or relocation incentive. The decision to offer an incentive will be made on a case-by-case basis and is neither promised nor guaranteed. For information visit: Recruitment Incentive or Relocation Incentive or Student Loan Repayment. * As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which your fitness and whether your continued employment advances the public interest will be evaluated. * This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider: * your performance and conduct; * the needs and interests of the agency; * whether your continued employment would advance organizational goals of the agency or the Government; and * whether your continued employment would advance the efficiency of the Federal service. * Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated. * Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.? * Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. Resumes must not exceed two single-sided pages and resumes longer than two pages will not be accepted. The minimum font size is 10-point for all body text. Headers may be slightly larger but must remain legible. All resumes must maintain a minimum 0.5-inch margins on all sides to ensure readability and prevent excessive content compression. Including supplemental pages or attachments disguised as resume extensions are prohibited and will not be reviewed to determine your eligibility/qualifications. You will be evaluated based on how your application materials reflect the qualification requirements of this position. Once the application process is complete, HR will review your application to ensure you meet eligibility and minimum qualifications. To determine if you are minimally qualified for this position, HR will complete a review of your resume and supporting documentation. In addition to meeting the minimum qualifications requirement(s), The best qualified candidates will be identified through a structured panel review that will result in a ranking referral to the hiring manager. The assessment will measure the specialized experience and critical competencies and/or job elements listed below that are required to successfully perform in the position. * Accountability * Leadership * Team Building * Technicial Competence Candidates who apply under Competitive Merit Promotion procedures will undergo a quality review to determine if they are highly qualified based on the content of their resume and their responses to the questionnaire. Best qualified candidates will be referred if all required supporting documentation has been provided. Candidates who apply under Noncompetitive Merit Promotion procedures will undergo a quality review to determine if they are minimally qualified based on the content of their resume and their responses to the questionnaire. Qualified candidates will be referred if all required supporting documentation has been provided. In the evaluation process, due weight will be given to job related experience, education, training, incentive awards and performance appraisals. Applicants must have a performance rating of at least the equivalent of fully successful to be eligible for promotion or placement. Applicants must provide a copy of a performance appraisal of record dated within the last 18 months. If the applicant is unable to provide a performance appraisal of record dated within the last 18 months, the applicant must provide a written explanation as to why. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help To apply for this position, you must submit a complete Application Package which includes: Resume or Application. At a minimum, your resume MUST contain job title (include job series and grade, if federal), duties, starting and ending dates (month and year), hours worked per week, and salary. One year of specialized experience is equivalent to 12 months at 40 hours per week. Part-time hours are prorated. You will not receive any credit for experience that does not indicate exact hours per week or is listed as "varies". USAJOBS has a template to ensure a complete resume. Please limit your resume to two pages. If more than 2 pages are submitted, only the first 2 pages will be reviewed to determine your eligibility/qualifications. In describing your experience, please be clear and specific. We may not make assumptions regarding your experience. Your resume will be used to validate your responses to the assessment tool(s). Failure to provide required information will result in loss of eligibility. You are welcome to submit an optional cover letter. Current BLM career and career-conditional employees: Submit a copy of your most recent (non award) SF-50, Notification of Personnel Action, or equivalent document that verifies tenure (block 24, code 1 or 2) and Competitive Status (block 34, code 1). Current BLM employees: Submit 1) a copy of your most recent performance appraisal/evaluation within the last 18 months and 2) a list of any awards (e.g. superior performance awards, special act or achievement awards, quality step increase, etc.) you received in the last 5 years. Any performance appraisal/evaluation and award documentation you provide will be forwarded to the selecting official. The selecting official will review this documentation and give it due weight consideration during the overall selection process. If you do not have your most recent performance appraisal/evaluation, please submit a statement as to why it is not available. Please indicate if any prior performance appraisals/evaluations were at an acceptable level. Documentation that you meet Selective Factors (PET Certificate) Do not submit photographs with your application package. Documents with photographs may not be seen by hiring officials-you must remove your image from any badges, licenses, etc. Do not upload Adobe portfolio documents. Adobe portfolio documents are not viewable by our agency's staffing offices. Applicants eligible under PL-114-47, Land Management Workforce Flexibility Act as a current or former employee of a land management agency, who is serving or previously served on a temporary or term appointments, you must submit the following documentation to receive consideration: * SF-50(s), Notification of Personnel Action, that documents your service under competitive examining procedures in time limited appointments that totals 24 months at land management agencies without a break in service of two or more years (initial, extension, and termination of all appointments); and * Documentation of satisfactory performance, if available, such as performance evaluations, references by supervisors, or other documents, e.g., memorandums of record, whereas the supervisor documented an acceptable performance level. Career Transition Assistance Program (CTAP) eligibles: Submit documentation verifying your CTAP eligibility - this includes a copy of the agency notice and your most recent SF-50 noting current position, grade level and duty location. ?Please note that documents selected for transfer from your USAJOBS profile are NOT automatically added to your application. You need to transfer your document(s) in the "Documents" step during the application process. Hard copy paper supplemental documents, submitted without prior Human Resources approval, will be considered as an incomplete application. Required documentation must be submitted by 11:59 p.m. Eastern Time, on the closing date of this announcement. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply Help THIS IS AN ONLINE APPLICATION PROCESS THROUGH USAJOBS. Your application package must be submitted by 11:59 PM Eastern Time by 01/28/2026. If you need assistance in applying on-line, please contact the HR Office at *****************. If applying on-line poses a hardship for you (i.e. you do not have access to the Internet) you must contact us prior to the closing date of the announcement for an alternative method of applying. PLEASE NOTE: If you have access to a public library, State Job Service Office, etc., you should use these resources to apply online. You must follow the steps described below to complete the application process: YOU MUST HAVE OR CREATE A PROFILE IN USAJOBS. Your profile must contain a current resume for submission. See Required Documents section for what to include in your resume. INSUFFICIENT INFORMATION COULD RESULT IN AN INELIGIBLE RATING. The USAJOBS Resume Builder was designed to ensure that your resume includes the standard information needed. The Resume Builder is an available tool when you login to your USAJOBS account. * Review the Appointment Eligibility Criteria: The eligibility section of the application process is designed to allow you to choose how you wish to be considered for this vacancy announcement. You will ONLY be considered for the appointment eligibilities that you selected. You must provide proof of your eligibility to be considered. * You must submit a resume and also complete the online application and assessment questionnaire and submit the documentation specified in the Required Documents section. * To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. * Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. * After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. * You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. * The eligibility portion of the application process is designed to allow you to choose how you wish to be considered for this announcement. You may choose more than one eligibility. You must provide proof of your eligibility and will only be considered for the questions that you answer "yes". * Please note, your eligibility will be based solely on the selections you have indicated in this section. You must provide the supporting documentation to support your claim to be considered. You may choose more than one eligibility in this section. To verify the status of your application, log into your USAJOBS account (Welcome | Login.gov), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: ******************************** FOLLOW UP. Check your application status before the announcement closes. It is your responsibility to ensure that a complete application (including a resume, on-line questionnaire, and applicable supplemental documentation) is received by 11:59 PM Eastern Time on 01/28/2026. NOTE: Technical problems may take at least 1 business day to resolve; therefore, you are highly encouraged to complete the application process prior to the closing date. Agency contact information Megan Allbrook Email ***************** Address BLM New Mexico State Office BLM New Mexico, NM-951 301 Dinosaur Trail Santa Fe, NM 87508 US Next steps You can track the progress of your application package via your USAJobs account. You will receive an acknowledgement email from USAJobs that your submission was successful once we have received your online questionnaire, resume, and any supporting documentation. You will be notified of the status of your application and/or referral to the hiring official via your USAJobs account after the evaluation process is complete. You will be contacted if further evaluation or interviews are required. Applicants who apply under this job opportunity announcement agree to have their application, associated documents and applicable personal information shared with other Bureaus/Offices within the Department of the Interior (DOI) who have vacancies within the same occupational series, grade, full performance level and in the same geographic location(s), including within the same metro/commuting area. Applying to this announcement does not replace the need to apply to other job opportunity announcements for which you wish to receive consideration. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help To apply for this position, you must submit a complete Application Package which includes: Resume or Application. At a minimum, your resume MUST contain job title (include job series and grade, if federal), duties, starting and ending dates (month and year), hours worked per week, and salary. One year of specialized experience is equivalent to 12 months at 40 hours per week. Part-time hours are prorated. You will not receive any credit for experience that does not indicate exact hours per week or is listed as "varies". USAJOBS has a template to ensure a complete resume. Please limit your resume to two pages. If more than 2 pages are submitted, only the first 2 pages will be reviewed to determine your eligibility/qualifications. In describing your experience, please be clear and specific. We may not make assumptions regarding your experience. Your resume will be used to validate your responses to the assessment tool(s). Failure to provide required information will result in loss of eligibility. You are welcome to submit an optional cover letter. Current BLM career and career-conditional employees: Submit a copy of your most recent (non award) SF-50, Notification of Personnel Action, or equivalent document that verifies tenure (block 24, code 1 or 2) and Competitive Status (block 34, code 1). Current BLM employees: Submit 1) a copy of your most recent performance appraisal/evaluation within the last 18 months and 2) a list of any awards (e.g. superior performance awards, special act or achievement awards, quality step increase, etc.) you received in the last 5 years. Any performance appraisal/evaluation and award documentation you provide will be forwarded to the selecting official. The selecting official will review this documentation and give it due weight consideration during the overall selection process. If you do not have your most recent performance appraisal/evaluation, please submit a statement as to why it is not available. Please indicate if any prior performance appraisals/evaluations were at an acceptable level. Documentation that you meet Selective Factors (PET Certificate) Do not submit photographs with your application package. Documents with photographs may not be seen by hiring officials-you must remove your image from any badges, licenses, etc. Do not upload Adobe portfolio documents. Adobe portfolio documents are not viewable by our agency's staffing offices. Applicants eligible under PL-114-47, Land Management Workforce Flexibility Act as a current or former employee of a land management agency, who is serving or previously served on a temporary or term appointments, you must submit the following documentation to receive consideration: * SF-50(s), Notification of Personnel Action, that documents your service under competitive examining procedures in time limited appointments that totals 24 months at land management agencies without a break in service of two or more years (initial, extension, and termination of all appointments); and * Documentation of satisfactory performance, if available, such as performance evaluations, references by supervisors, or other documents, e.g., memorandums of record, whereas the supervisor documented an acceptable performance level. Career Transition Assistance Program (CTAP) eligibles: Submit documentation verifying your CTAP eligibility - this includes a copy of the agency notice and your most recent SF-50 noting current position, grade level and duty location. ?Please note that documents selected for transfer from your USAJOBS profile are NOT automatically added to your application. You need to transfer your document(s) in the "Documents" step during the application process. Hard copy paper supplemental documents, submitted without prior Human Resources approval, will be considered as an incomplete application. Required documentation must be submitted by 11:59 p.m. Eastern Time, on the closing date of this announcement. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Installs, repairs, troubleshoots, aligns, calibrates, and maintains electrical and electronic control systems. Essential duties include the following: Champions the company's H.S.E.&T program in all aspects of work performed to provide quality service in a safe and efficient manner. Uses troubleshooting and repair skills to keep instrumentation in working order. Installs and configures electronic, electro-mechanical and instrumentation equipment. May assist and train mechanical technicians in testing components and repairing electrical problems. Researches equipment and component needs and maintains electronic parts inventory. Performs preventative maintenance on instrumentation and maintains preventative maintenance records. Follows operating instructions for guidance in troubleshooting, maintenance, and performing general repairs. Provides technical support in the form of operator training on electronic equipment. Performs emergent repairs on electronics and instrumentation at field locations. Works directly with vendors and other internal departments to advance business objectives and operations. Performs any and all job duties as assigned by supervisory personnel including general labor, as necessary. This position is required to perform safety sensitive functions as defined in the CES Drug and Alcohol Plan. Equal Opportunity Employment

Install, test, maintain and repair electronic, computer, electrical and mechanical systems; plan and implement preventive maintenance schedules for assigned equipment and perform a variety of technical tasks relative to assigned areas of responsibility. This is a safety sensitive position subject to random drug/alcohol testing. s are intended to present a general list of tasks/duties performed by employees within this job classification. Job Descriptions are not intended to reflect all duties performed within the job. Minimum Education, Experience And Additional Requirements Education and experience directly related to the minimum requirements below may be interchangeable on a year for year basis. High school diploma or GED plus sixty (60) credit hours vocational training or completion of a two (2) year technical program in electronics, electrical engineering, or instrumentation; and Four (4) years of electronic systems installation, maintenance, repair and low voltage systems experience. One year (1) technical/functional crew lead experience preferred. ADDITIONAL REQUIREMENTS: Possession of a valid New Mexico Driver's License, or the ability to obtain by date of hire. Possession of a valid City Operator's Permit (COP) within six (6) months from date of hire. Possession of a valid New Mexico Commercial Driver's License (CDL), Class A within six (6) months from date of hire. Possession of a valid AC Recovery certification within six (6) months from date of hire. Possession of a valid Compressed Natural Gas (CNG) license within six (6) months from date of hire. Preferred Knowledge * Pertinent, Federal, State and local laws, codes and regulations * Theories and practices of electronic equipment diagnostics and repair * Theories and practices supporting the installation, maintenance and repair of electronic circuits and equipment * Principles and practices of preventive maintenance associated with electronic components * Basic tools, methods and techniques used in the repair and maintenance of various electronic equipment * Occupational hazards and standard safety practices * Modern office procedures, methods and equipment * General working knowledge of transit operating systems * Active understanding of electronic and electro-mechanical systems Preferred Skills & Abilities * Install, troubleshoot and maintain electronic, mechanical, computer and low voltage systems * Perform corrective and preventive maintenance on assigned electronic components * Use various diagnostic equipment associated with electronic repairs * Maintain appropriate supplies and supply sources for timely repair of equipment * Analyze, locate and correct electronic malfunctions in assigned equipment * Read, interpret and prepare schematics and wiring diagrams * Plan and implement preventive maintenance schedules for assigned equipment * Understand and follow oral and written instructions * Work independently in the absence of supervision * Communicate clearly and concisely * Perform the essential functions of the job with or without reasonable accommodation * Establish and maintain effective working relationships with those contacted in the course of work

Company: The Boeing Company Boeing Defense, Space and Security (BDS) is looking for an Associate or Experienced Engineering Technician (Level 2 or 3) to join our team at the Starfire Optical Range on Kirtland AFB in Albuquerque, New Mexico. The selected candidate will be supporting the Air Force Research Lab in their advancement of Space Domain Awareness capabilities using ground-based telescopes. Starfire Optical Range is a world class research facility with recognized achievements in adaptive optics, enabled by the quality, enthusiasm, and dedication of our entire team. Our team consists of engineers and technicians in all disciplines required to plan, design, integrate, and test complex optical, electronic, laser systems to achieve research objectives. Position Responsibilities: Assists engineers and senior technicians with efforts such as optical alignment Serve as a crew member for tests, being trained in optics and lasers, telescope operator, camera operator, or atmospheric operator Participates in test design and performs routine procurement, fabrication and assembly of components, test fixtures and test systems Maintains labs to Air Force standards for Precision Measurement Equipment Laboratory (PMEL), HAZMAT, ESD, property, and equipment maintenance Facilitates systems integration, fabrication and modification; supports system pre-test setup, integration, checkout, and post-test tear-down Troubleshoots and recommends resolution of basic laboratory and test-related problems This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills/ Experience): 2+ years of experience in engineering technician, construction or facilities maintenance disciplines 2+ years of experience working with powered hand tools or equipment Willing to work variable shifts; including days, evenings, nights and weekends Preferred Qualifications (Desired Skills/Experience): 4+ years of related work experience or an equivalent combination of education and experience Experience operating complex computer-based analysis or control systems Experience with high power lasers Experience with optical alignment techniques Experience with electronics/electrical or mechanical systems Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for Variable shift. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Associate (Level 2) Summary pay range: $53,550 - $72,450 Experienced (Level 3) Summary pay range: $63,750 - $86,250 Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires an active U.S. Top Secret/SCI Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 4 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Looking for an opportunity to work with a talented team and expand your experience in supporting Weapons Test and Evaluation (T&E) projects? SSI needs to add an Engineer Technician I to support our current list of services provided to the U.S. Navy. These positions, located at the White Sands Missile Range (WSMR) in White Sands, New Mexico, will provide engineering, technical, logistics, and administrative support in the planning, maintenance, preparation, execution, launch operations and post-test phases to the W Department of the Navy Surface Warfare Center, Port Hueneme Division (NSWC PHD). Primary Functions: Entry Level Position - under supervision of a more senior engineering technician the incumbent will: Assemble electrical and electronic systems and prototypes Assist with building, calibrating, and repairing electrical instruments or testing equipment Assist with building or modifying prototypes from rough sketches or plans Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics. Assist with design work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment such as complex launch systems to include stationary and mobile launchers. Assist with installation, maintenance, system upgrades, troubleshooting, replacement, and repairs of all facilities, infrastructure, vehicles, new/existing equipment, and tools. Use troubleshooting aids such as oscilloscopes and digital VOM's to accurately interpret readings. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: Ability to climb and work at elevated heights of up to eighty feet. Ability to interpret basic electrical schematics and blueprints. Ability to understand basic hydraulic and pneumatic systems. Driver's License Able to deploy to both CONUS and OCONUS CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in May of 2023. Must possess a valid driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

Job DescriptionDescription: Position Type: Non-Exempt, Part-Time, On-Call Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in Range operations and maintenance (O weapons testing; facilities management; aerial, ground and seaborne targets O technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business. We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 36-year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost-effective results while achieving complete customer satisfaction. We are currently looking to hire Engineering Technicians on a part-time, on-call basis at our White Sands Missile Range Base Camp in Orogrande, NM to support our unit rotations schedule. The frequency of the work is 9-10 times a year for about 1500 hours, many of which are overtime hours. Our Surge Technicians work 12 consecutive days during unit rotations and we support approximately 9-10 rotations a year at the Whites Sands Missile Range location. As a surge technician, your duties include (but are not limited to): Providing support of test events on military ranges which requires a knowledge of military protocol and standard operating procedures during FTX events. Applying technical knowledge of electrical, mechanical, and computer skills in support of operations and routine maintenance on EW & Radar systems and their peripheral equipment. Setting up EW & Radar systems at remote locations, operating the systems in support of test missions, and tearing down the systems once testing is completed. Work includes cross-utilization into other positions that fall within their scope of work. Working in a dynamic, fast-paced environment of military test events. The Engineering Technician IV performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. Work Conditions: Conditions will vary as most work will be accomplished outdoors. Must be able to work outside on the range throughout the year where temperatures and weather conditions will vary. Physical requirements include: 45% standing, 25% walking, 20% sitting, 5% reaching, 5% lifting, 10% crouching in tight spaces (inside unit vehicle), and you must be capable of lifting 50-100 pounds independently or with assistance from others. This is a part-time on-call position and shift hours vary with mission requirements. Must be able to work all shifts, weekends, holidays and overtime as needed when called in, sometimes on short notice, to support test missions. Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned. Due to real-world war-time environments, must be able to handle combat simulation and maneuvering exercises. May be subjected to loud noises including explosive devices, live gun fire/ammunitions firing war-time simulation, and loud noise generated from inside military vehicles during missions, troop support, and while working on range. Requirements: Education/Experience/Skills: High School diploma or equivalent. 10+ years of electrical and mechanical system maintenance and repair experience. 5+ years of maintenance supervisor/maintenance lead/maintenance planning experience. 3+ years of RF maintenance and repair experience. Must have radar operation experience. Must have working knowledge of Network/Computer operations & maintenance. Experience working at a government facility helpful, but not required. Ability to obtain a Forklift Operator license. Proficiency in Microsoft Office Suite to include Excel, Word, Internet Explorer. Ability to input data into various user interface applications, ability to save and transfer data via USB sticks, CDs, hard drives, or other storage devices, and knowledgeable with networking and component configuration set-up and troubleshooting. Must have strong working knowledge and the ability to use hand tools and technician diagnostic equipment to include digital multi meters, power meters, power drills, wrenches, screw drivers, etc. Work experience as a technician in any of the following fields is considered a plus: Mechanic, Electrician, Communication System Repairman, or Hydraulic/Pneumatic System Repairman. Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment. U.S. Citizenship required and you must be able to obtain a U.S. DoD Security Secret Clearance prior to start date and maintain a Secret clearance throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. Supporting Our Warfighters: As a highly regarded and long-established DoD employer, SA-TECH recognizes that our success is indicative of our team members' hard work and dedication towards a common goal… Supporting our Warfighters. Along with unparalleled stability, we have the ingredients for superior performance with a servant leadership mentality that provides an affirmation of purpose and value in a team-oriented positive work environment. As such, we provide a sense of family, competitive pay and employee benefits, along with a strong commitment to the professional development of our workforce and for providing broad career opportunities throughout the United States. SA-TECH offers: Employee Recognition Above-Average Compensation Competitive Benefits Ongoing Training and Development Career Advancement Opportunities Benefits Offered: Medical, Dental, Vision Life Insurance Long-Term Disability 401(k) match Flexible Spending Accounts EAP Education Assistance PTO and Holidays Vacation and Sick Leave Other Important Information You Should Know: By applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills. SA-TECH offers flexible work schedules depending on the program, alongside generous PTO benefits. We are an Equal Opportunity/Affirmative Action employer and evaluate all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected Veteran status. We participate in the E-Verify system to verify work authorization in the U.S. Applicants are encouraged to apply within 5-15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work-life balance and our pay and benefits aim to enhance employee well-being. If this culture resonates with you, we invite you to apply. If you're uncertain about your fit, please explore other roles on SA-TECH Careers. All responses will be handled with strict confidentiality. ** Please note that any provided salary information is a general guideline. SA-TECH considers factors such as (but not limited to) scope and responsibilities of the position, the candidate's work experience, education, training, and skills as well as market and business considerations when extending offers.

Job Title: Engineering Technician Build a Meaningful Career with Impact Are you a detail-oriented, hands-on professional looking for an opportunity to support innovative engineering projects? At Bohannan Huston, we are looking for an experienced Engineering Technician to join our team in our Las Cruces office. If you are passionate about contributing to projects that make a real difference in community development and planning, we encourage you to apply today! Your Role & Responsibilities In this role, you will contribute to: Technical Support - Assist engineers with project setup, design workflows, and plan production to ensure efficient project execution. Drafting & Design - Support engineering teams in the design of civil infrastructure projects, including site development, roadways, water and wastewater utilities. Field Work & Data Collection - Conduct field visits to gather site data and verify completed projects through as-built documentation. Project Documentation - Help prepare construction documents, project reports, and drawings in accordance with specifications and regulatory standards. Design Software Application - Utilize one or more design software platforms (such as AutoCAD or Civil 3D) to assist in creating high-quality, accurate design deliverables. Quality Assurance - Review field data and design outputs to ensure accuracy, consistency, and compliance with industry standards. What We Are Looking For Professional Experience - 2 years minimum experience in civil engineering, surveying, or a related technical field. Academic Excellence -- You have graduated with a high school/equivalent plus a civil technology or survey technology degree, or a related technical field. Technical Proficiency - You are fluent in AutoCAD Civil 3D software on site development grading and drainage plan production, pipeline alignments, and roadway alignments and grading. You have knowledge and capabilities in the use of ArcGIS. Attention to Detail - Strong ability to review technical data, ensure accuracy in designs, and identify potential issues before they impact the project. Strong Communication Skills - Ability to communicate technical concepts effectively, both written and verbally, and work collaboratively with diverse teams. Problem-Solving Mindset - An innovative thinker who can troubleshoot and resolve technical challenges in the field and the office. Commitment to Safety - Experience working in compliance with safety standards and maintaining a safe work environment. Technologies You Will Work With & Learn AutoCAD Civil3D ArcGIS Why Choose Bohannan Huston? At Bohannan Huston, we are dedicated to delivering sustainable engineering solutions and creating an inclusive work environment that promotes personal and professional growth. You will have the opportunity to work on innovative, high-impact projects alongside an experienced and supportive team. Why Las Cruces, New Mexico? Las Cruces provides affordable living, stunning desert landscapes, and a relaxed lifestyle. With a growing community and border region, it is an ideal location to expand your career. What We Offer Professional Development - Access to mentorship, training, and hands-on technical experience. Work-Life Balance - Three weeks of flexible leave plus an additional week off during the winter break to support personal and professional well-being. Comprehensive Benefits - Medical, dental, and vision insurance, plus an HSA with company contributions. Financial Security - A 401(k) retirement plan with a competitive company match. Award-Winning Workplace - Recognized as a Top Workplace and ENR Top 500 Firm since 1998. Take the Next Step in Your Career If you are excited to join a collaborative team, contribute to meaningful engineering projects, and develop your skills in a supportive environment, we encourage you to apply today! Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

The following duties are intended to provide a representative summary of the major duties and responsibilities and ARE NOT intended to serve as a comprehensive list of all duties performed by all employees in this classification. Incumbent(s) may not be required to perform all duties listed and may be required to perform additional, position-specific duties. REPRESENTATIVE DUTIES Diagnosing, troubleshooting and repairing radar and positioning systems. Working with the Engineering department to adapt or modify equipment to meet customer's requirements. Performing preventive maintenance inspections on equipment and to determine what maintenance is needed. Researching and ordering replacement components and spare parts for radar and position control system. Utilize safe rigging and lifting techniques. Setting up and testing various types of electronic equipment to determine equipment specifications and performance. Recommend improvements to maintenance methods, system and equipment performance as well as operational efficiencies. Analyzes work problems and recommends solutions. Train and mentor subordinate technicians Follows all OSHA Safety Regulations. Safely utilizes various measuring, diagnostic and testing instruments to help provide efficient solutions. Maintains a strict schedule in order to successfully complete assignments on time. Other duties as assigned by Lead Technician, Management or Supervisor. Basic experience in operating, diagnosing, troubleshooting and repairing instrumentation radar systems (from HF to microwave frequencies up to Ka Band). Must possess extensive working knowledge and technical experience in utilizing schematics, diagrams, and appropriate test equipment to solve analog and digital electronic problems as well as in motion control systems (Turntables , Rotators and Antenna positioning and control ) Basic experience in the set up and measurements of Electronic and Microwave systems and components. Antenna alignment and basic antenna gain measurements. Measurements of Radar Parameters ( PRF, PW, Duty Cycle, Transmit Receive Polarization) Power and performance measurements of High power amplifiers (TWTA, Klystron, Solid-State) Power and performance measurements of Low noise and general purpose amplifiers Solid state switches (high and low power and frequency) RF and microwave passive components Coaxial Cable and Waveguide Digital logic and circuitry AC and DC voltage, power and components Basic experience in setting up operating and performing measurements with test equipment. Spectrum Analyzers Signal Generators/Synthesizers Vector Network Analyzers (to include full 2 port calibration) Fiber Optic Loss and Time Domain Reflectometer Instruments Oscilloscopes Standard voltage and power measurement instruments Must possess Basic computer knowledge of; Windows 7 Operating System. Microsoft Office. Must be able to use and understand the following disciplines of math and their applications; Basic Algebra Basic Geometry Elementary Statistics Mean Median Variance Standard Deviation Basic Trigonometry Basic knowledge of the Radar Equation NASA Certified soldering skill. Knowledge of installing and maintaining electronic systems, chassis and components. Basic experience assigning work and directing other employees to ensure the job is done safety and correctly. Performs other duties as assigned or required. Other Attributes This position will require various shifts, weekends, and alternative work schedules for extended periods of time. Must be willing to work overtime when required. Must be capable of working with minimal or no supervision. MINIMUM QUALIFICATIONS Three years' experience as an Engineering Technician or an Associate of Applied Science Degree in Electronics Technology, or Military training certifications in Depot level electronic maintenance and repair with demonstrated knowledge. High school diploma with demonstrated knowledge, and three years' experience. Qualified applicants who are offered a position must pass a technical competency test. Qualified applicants who are offered a position must pass a pre-employment substance abuse test. Possess a valid driver's license. Must be a United States Citizen. This position will require the ability to obtain a Top Secret security clearance at our client's location and their customer program access. MINIMUM PHYSICAL REQUIREMENTS Must be capable maintaining physical condition to regularly lift up to 50 pounds. Must be capable of regularly climbing extension ladders, tower ladders, stepladders and stairs. Requires the flexibility to bend/stoop, squat repetitively. Requires the ability to regularly kneel. Requires the ability to repetitively stretch or reach horizontal or vertically. Must be capable to walk extensively. Must be capable of differentiating colors pertaining to wire color coding. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress. This is not an employment agreement or contract. Management has the exclusive right to alter this job description at any time without notice.

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: We are seeking a skilled Electromechanical Technologist to join our team. In this role, you will play a crucial part in the design, implementation, and maintenance of data acquisition and control systems. Your expertise will help ensure the reliability and efficiency of our operations, contributing to the overall success of our projects. You will collaborate with cross-functional teams to identify and address technical challenges, fostering a culture of innovation and continuous improvement. On any given day, you may be called on to: + Provide designs, controls, and engineering support for data acquisition and control systems. + Conduct testing and oversight of existing data acquisition and control systems. + Maintain data acquisition and control systems software and hardware. + Implement software data analytics routines into programs for non-technical operators. + Assist with the implementation and commissioning of contractor-supplied software into current and future operations control and data acquisition systems. + Troubleshoot problems and implement workable solutions as required. Due to the nature of the role, this candidate must be able to work onsite. Salary Range: $72,800 - $140,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + High school diploma or higher degree plus three (3) or more years of related experience + Experience in operating and set up of oscilloscopes and soldering and/or standard electrical engineering measurement and test equipment such as power meters/sensors, and signal/waveform generators + Able to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire: + Current Certified LabView developer (LCD) accreditation from National Instruments + Electromagnetic Impulse troubleshooting skills, control circuit theory and design + Experience with network analyzers and spectrum analyzers + Demonstration of at least one LabView controls/data acquisition project (minimum of 100 vi s) from inception to completion to include final documentation. + Demonstrated experience creating, storing and retrieving software from repository systems (i.e. GitHub or Sub-Version). + Experimental RF systems experience (theory/troubleshooting/maintenance). + Strong technical writing skills and the ability to prepare effective documentation. + Ability to work on programs that require adherence to standards and requirements. + Excellent interpersonal and communication skills as well as personal initiative, responsiveness, attention to detail and organization skills to handle multiple tasks and deadlines. + Willingness to tackle problems in a highly collaborative environment. + Ability to meet challenging design requirements and deliver results while meeting timelines within cost, schedule, and performance. + Active DOE Q-Level security clearance. About Our Team: The Above Ground Testing (AGT) Accelerator Operations (1332) department is responsible for the operation of the Saturn, HERMES III, and SPHINX pulsed power accelerators. The primary objective of the department is to provide an applied research environment for the study of radiation effects on materials and electronics. The three accelerators generate electrical pulses of up to 20 million Volts and up to 12 million Amperes with nanosecond duration in order to create extremely intense pulsed radiation environments for the study of radiation effects sciences. Department 1332 also conducts pulsed power research and development to: improve radiation source fidelity, increase the output and fluence, as well as to improve the overall reliability and reproducibility of the accelerators. These unique, world class facilities are an essential part of the NNSA s Stockpile Stewardship Program. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Position Information: This Limited Term Employee (LTE) position is a temporary position for one year term, which may be renewed at Sandia's discretion up to a maximum of seven years. Individuals in LTE positions may bid on regular Sandia positions as internal candidates, and in some cases may be converted to regular career positions during their term if warranted by ongoing operational needs, continuing availability of funds, and satisfactory job performance. Essential Functions: If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Job ID: 696596 Job Family: RD Regular/Temporary Position: T Full/Part-Time Status: F

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the repair and maintenance of pipelines, equipment and performance of work associated with daily operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, troubleshoot, repair, and operate compressor station or pump station equipment, plant facilities and pipeline facilities including: prime movers and compressors, valves, filters, separators, dehydrators, pumps, and auxiliary equipment in order to meet production and product throughput requirements in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Plan, organize, prioritize, communicate, and coordinate work with employees and contractors to validate the work is completed in a safe, timely, and effective manner * Provide budgetary information, schedule work and outages, order materials, maintain inventory, and coordinate needed resources * Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work * Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments * Utilize precision measurement equipment to determine dimensions and set operating equipment clearances and tolerances * Maintain equipment records, logs, inventory, and other documentation required by the Partnership's procedures and regulatory agencies * Provide training and leadership to develop and maintain effective work crews, dependent upon level hired * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Maintain facilities, grounds, and work areas in a safe, orderly, and efficient manner * Actively participate and provide leadership in safety programs and initiatives while following policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record and ability to be certified as a USDOT driver under FMCSA may be required based on applicable law, reporting location, and geographic work area * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Occasional exposure to heat, cold, and other adverse weather conditions * Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

Job Description We are a (rad hard) team of builders, breakers, and fixers - delivering pulsed-power systems to accelerate the world's transition to fusion. Customers span defense, energy, and aerospace; our pulsed-power platforms (e.g., TITAN, Z-STAR) support nuclear effects testing now and fusion plants tomorrow. About the Role You will be responsible for the assembly, wiring and plumbing on electromechanical systems. Systems include vacuum, power generation, pulse forming section and oil system. You must be able to read mechanical and electrical drawings to be able to assemble, field and troubleshoot these complex systems. Job Requirements Assemble racks, HV/LV harnesses, enclosures, panels, and motion/actuation subsystems. Install pumps, valves, seals, gauges; leak-check and maintain oil and vacuum systems. Mount sensors, route signal cabling, and bring up data acquisition system (DAS)-oscilloscopes, probes, DMMs, and troubleshoot connection issues. Read schematics and harness drawings; crimp/terminate to specification; label, route and document work. Run electrical checkouts, resolve system noise, troubleshoot high voltage (HV) systems, and restore electromechanical systems to operational status. Preventive/corrective maintenance, spares, calibration, and readiness of tools and materials. Responsible for calibration of oscilloscopes, power supplies, etc.- Execute HV/LOTO, ESD, rigging, and lift plans, proper use of PPE; maintain clear and concise safety records. Capture build notes, monitor/maintain electromechanical systems, and feed improvements back to engineering. Minimum Requirements 3-7+ years experience building and integrating complex electromechanical systems (emphasis in pulsed power). Mastery of hand tools and metrology; expertise in electrical wiring and safety. Experience working with high voltage/high current systems and precision timing of operations. Ability to read mechanical design drawings and electrical/wiring diagrams and can provide improvement feedback to design teams. Enhanced knowledge and operation of oscilloscopes, HV probes, leak detectors, electrical testers; working knowledge of ESD mitigation is required. Clear and concise communication with operations crew and engineering team; ability to concisely document technical data and decisions. Desired Skills Pulsed-power familiarity, ability to solder and build cables Cleanliness/contamination control experience. Machining/rapid-fab familiarity; basic CAD or ECAD experience. Forklift/overhead crane, rigging, and safe lifting certs.

Looking for an opportunity to work with a talented team and expand your experience in supporting Weapons Test and Evaluation (T&E) projects? SSI needs to add an Engineer Technician IV to support our current list of services provided to the U.S. Navy. These positions, located at the White Sands Missile Range (WSMR) in White Sands, New Mexico, will provide engineering, technical, logistics, and administrative support in the planning, maintenance, preparation, execution, launch operations and post-test phases to the W Department of the Navy Surface Warfare Center, Port Hueneme Division (NSWC PHD). Primary Functions: Identify solutions to technical design problems that arise during design, fabrication, and checkout of electrical systems Inspect designs for quality control, report findings, and make recommendations Draw diagrams and write specifications to clarify design details of experimental electronics units Build or modify prototypes from rough sketches or plans Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics. Redline technical data package (manuals, procedures, drawings...) to reflect changes in design or implementation. Possess understanding and ability to read drawings, schematic drawings, and engineering instructions for putting together electronic assemblies, as well as write-up findings and solutions. Perform highly skilled technical work in areas of installation, maintenance, and repair of mechanical equipment with a wide knowledge and high degree of proficiency. Develop, execute and assist with design work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment such as complex launch systems to include stationary and mobile launchers. Develop specialized design and weight test procedures in support of various launch systems and ordnance handling ground support equipment with wide knowledge and a high degree of proficiency. Design, implement and assist engineers in the modifications of various target designs, missile and rocket control systems, missile and rocket launchers, develop and execute precise hydraulic, static and electronic test equipment. Operate various industrial lifting equipment, man-lifts, overhead cranes, hoists, and forklifts in a safe and efficient manner. Use troubleshooting aids such as oscilloscopes and digital VOM's to accurately interpret readings. If this aligns with your experience and sounds like it is the career path you wish to progress, these are the requirements to be considered for this position: Education/Experience/Skills: High School Diploma or equivalent with an additional 5-7 years of experience. Required Experience: Five or more years' experience related to testing, troubleshooting, projects including VLS, various Launching Systems, and associated equipment. Experience in: Installing, operating, testing, and evaluating various weapon systems, equipment, and components Ability to climb and work at elevated heights of up to eighty feet. Proficiency with computers and ability to work with Microsoft Word and Excel. Familiarity with AutoCAD and Solid Works. Driver's License Knowledge of WSMR operations Able to deploy to both CONUS and OCONUS Minimum of one year of previous experience operating and maintaining industrial lifting equipment, forklifts, man-lifts, cranes, and hoists. The following qualifications are desired: Familiarity with the implementation of Navy Fire Control Systems and Navy Vertical Launching Systems. Skill in launching systems, ordnance operations, and knowledge in installing and maintaining ship and land-based systems used in a test and evaluation environment. CONTINGENT OFFER This position is contingent upon contract award and is anticipated to start in May of 2023. Must possess a valid driver's license. U.S. Citizenship and must be able to obtain and maintain U.S. DoD SECRET Security Clearance required for hire, and to be maintained throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. What You Can Expect from Us Positive Office environment Professional and knowledgeable team and leadership Business Office hours What's In It for Me? Competitive salary Great benefits, including: Company-subsidized PPO Medical, Dental, and Vision coverage 401(k) Retirement Plan with company match Paid Time Off 10 Paid Holidays per year Education Assistance Company-subsidized Corporate Fitness Program Medical and Dependent Care Flexible Spending Accounts Company-paid Life and Accidental Death and Dismemberment Insurance with an option to increase coverage. Company-paid Short- and Long-term Disability Insurance Company-paid Employee Assistance Program Flexible hours Opportunities for on-the-job training What Your Experience Working for Us Will Be Like Ask any of our employees and they will tell you SSI is a great place to work with an upbeat and positive culture. We take pride in our work to continuously improve on our performance in a manner that enhances the mission of the agencies we serve while expanding opportunities for our employees and our company. About Synectic Solutions, Inc. (SSI) Synectic Solutions, Inc. (SSI), is an award-winning, 20-year government contracting agency focused on the areas of logistics, engineering, management, and information technology. SSI is a growing organization committed to exceeding customer expectations, to continually improving all products, services, and processes, and to perform all work with the commitment to upholding the highest standards and ethics. Ready to apply? If this job sounds like a fit for you, then click on the ‘apply' button below. Good luck!

Position Type: Non-Exempt, Part-Time, On-Call Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in Range operations and maintenance (O&M); weapons testing; facilities management; aerial, ground and seaborne targets O&M; technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business. We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 36-year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost-effective results while achieving complete customer satisfaction. We are currently looking to hire Engineering Technicians on a part-time, on-call basis at our White Sands Missile Range Base Camp in Orogrande, NM to support our unit rotations schedule. The frequency of the work is 9-10 times a year for about 1500 hours, many of which are overtime hours. Our Surge Technicians work 12 consecutive days during unit rotations and we support approximately 9-10 rotations a year at the Whites Sands Missile Range location. As a surge technician, your duties include (but are not limited to): Providing support of test events on military ranges which requires a knowledge of military protocol and standard operating procedures during FTX events. Applying technical knowledge of electrical, mechanical, and computer skills in support of operations and routine maintenance on EW & Radar systems and their peripheral equipment. Setting up EW & Radar systems at remote locations, operating the systems in support of test missions, and tearing down the systems once testing is completed. Work includes cross-utilization into other positions that fall within their scope of work. Working in a dynamic, fast-paced environment of military test events. The Engineering Technician IV performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. Work Conditions: Conditions will vary as most work will be accomplished outdoors. Must be able to work outside on the range throughout the year where temperatures and weather conditions will vary. Physical requirements include: 45% standing, 25% walking, 20% sitting, 5% reaching, 5% lifting, 10% crouching in tight spaces (inside unit vehicle), and you must be capable of lifting 50-100 pounds independently or with assistance from others. This is a part-time on-call position and shift hours vary with mission requirements. Must be able to work all shifts, weekends, holidays and overtime as needed when called in, sometimes on short notice, to support test missions. Must be able to wear appropriate Personal Protective Equipment (PPE) for work tasks assigned. Due to real-world war-time environments, must be able to handle combat simulation and maneuvering exercises. May be subjected to loud noises including explosive devices, live gun fire/ammunitions firing war-time simulation, and loud noise generated from inside military vehicles during missions, troop support, and while working on range. Requirements Education/Experience/Skills: High School diploma or equivalent. 10+ years of electrical and mechanical system maintenance and repair experience. 5+ years of maintenance supervisor/maintenance lead/maintenance planning experience. 3+ years of RF maintenance and repair experience. Must have radar operation experience. Must have working knowledge of Network/Computer operations & maintenance. Experience working at a government facility helpful, but not required. Ability to obtain a Forklift Operator license. Proficiency in Microsoft Office Suite to include Excel, Word, Internet Explorer. Ability to input data into various user interface applications, ability to save and transfer data via USB sticks, CDs, hard drives, or other storage devices, and knowledgeable with networking and component configuration set-up and troubleshooting. Must have strong working knowledge and the ability to use hand tools and technician diagnostic equipment to include digital multi meters, power meters, power drills, wrenches, screw drivers, etc. Work experience as a technician in any of the following fields is considered a plus: Mechanic, Electrician, Communication System Repairman, or Hydraulic/Pneumatic System Repairman. Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment. U.S. Citizenship required and you must be able to obtain a U.S. DoD Security Secret Clearance prior to start date and maintain a Secret clearance throughout employment. All candidates will be required to pass background screening to include SSN, Driver Record, and Criminal Background Investigation. Supporting Our Warfighters: As a highly regarded and long-established DoD employer, SA-TECH recognizes that our success is indicative of our team members' hard work and dedication towards a common goal… Supporting our Warfighters. Along with unparalleled stability, we have the ingredients for superior performance with a servant leadership mentality that provides an affirmation of purpose and value in a team-oriented positive work environment. As such, we provide a sense of family, competitive pay and employee benefits, along with a strong commitment to the professional development of our workforce and for providing broad career opportunities throughout the United States. SA-TECH offers: Employee Recognition Above-Average Compensation Competitive Benefits Ongoing Training and Development Career Advancement Opportunities Benefits Offered: Medical, Dental, Vision Life Insurance Long-Term Disability 401(k) match Flexible Spending Accounts EAP Education Assistance PTO and Holidays Vacation and Sick Leave Other Important Information You Should Know: By applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills. SA-TECH offers flexible work schedules depending on the program, alongside generous PTO benefits. We are an Equal Opportunity/Affirmative Action employer and evaluate all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected Veteran status. We participate in the E-Verify system to verify work authorization in the U.S. Applicants are encouraged to apply within 5-15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work-life balance and our pay and benefits aim to enhance employee well-being. If this culture resonates with you, we invite you to apply. If you're uncertain about your fit, please explore other roles on SA-TECH Careers. All responses will be handled with strict confidentiality. ** Please note that any provided salary information is a general guideline. SA-TECH considers factors such as (but not limited to) scope and responsibilities of the position, the candidate's work experience, education, training, and skills as well as market and business considerations when extending offers.