Electronics technician jobs in Oklahoma City, OK - 169 jobs

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description WHY JOIN OKLAHOMA CHILLER? This is not just another controls job. This is an opportunity to lay the foundation of something special. Oklahoma Chiller is expanding our Building Automation Team to Oklahoma City, and we are looking for a high-caliber technician who wants to be part of building something from the ground up. We are a Delta Controls distributor and leverage the Niagara framework on the front end. You will not only install and program advanced systems, but also help shape the future of this division - training teammates, leading projects, and representing our culture every step of the way. If you are ready to be a cornerstone in the growth of an elite BAS team and join a company that lives its values of trust, loyalty, courage, humility, and excellence - then this might be your next chapter. ABOUT THIS ROLE You will be the first dedicated BAS Technician in OKC - a true player-coach role. We are looking for someone who can execute today and help us build for tomorrow. That means running high-level installations, commissioning new systems, and mentoring the next generation of BAS techs. You will have strong partnership with our Tulsa-based BAS team, access to excellent tools and support, and leadership that is serious about growth and investment. WHAT YOU WILL DO Install, commission, and service building automation systems and components Program Delta Controls and Niagara-based systems using predefined and custom sequences Troubleshoot system communication and logic issues Interpret electrical, mechanical, and network drawings to guide installations Perform firmware upgrades, calibrations, and device configurations Collaborate with engineering, operations, and service teams to deliver complete BAS solutions Coach, mentor, and help grow a high-performance controls team in OKC Represent Oklahoma Chiller's mission, vision, and values in every customer interaction YOU MIGHT BE OUR PERSON IF… You are highly technical but just as passionate about people You take initiative and thrive with autonomy and ownership You enjoy building systems, teams, and relationships You are energized by the challenge of creating something great You believe culture is built, not found - and you want to shape it from day one You are eager to mentor others while continuing to grow your own skillset WHAT WILL PUT YOU AHEAD 5 or more years of BAS experience with DDC, Delta Controls, or Niagara Proven experience with installation, programming, and commissioning of control systems Strong understanding of networking concepts, IP protocols, and systems integration Ability to read and interpret electrical, mechanical, and network drawings Comfort estimating scope and supporting project planning Experience developing graphics, custom logic, and user interfaces Leadership or mentoring experience is a major plus Benefits We take pride in offering more than just great pay. We invest in our team - technically, financially, and personally: Pay Range: $25 to $45 per hour plus overtime (based on experience) Health Insurance: 100 percent employer paid for employees; 50 percent for dependents Dental and Vision Insurance: 100 percent employer paid for employees Life Insurance and Disability Coverage Profit Sharing Bonus: 3 percent annually based on company performance 401(k) Match: 4 percent company match Paid Time Off: 96 hours of PTO annually, plus 10 paid holidays Company Vehicle, Phone, and Laptop Relocation Assistance Available Career Path and Leadership Development Support Culture Built on Purpose and People First

**Company:** Expand Energy Our core values - Stewardship, Character, Collaborate, Learn, Disrupt - are the lens through which we evaluate every business decision\. As a dynamic, growing company that offers extremely competitive compensation and benefits, our employees are our most valued assets and the foundation of Expand's performance among our E&P competitors\. We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team\. We realize that, historically, underrepresented groups feel the need to be 100% qualified in order to apply\. If you meet any combination of our requirements, we encourage you to apply\. We strive to hire people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes our company stronger\. ## **Job Summary** This entry level position provides technical and administrative support under direct supervision to in order to assist with engineering operations\. ## **Job Duties & Responsibilities** + Performs data management activities, which include loading/entering, verifying, manipulating, analyzing, and reporting data related to engineering operations + Performs simple engineering calculations and gathers/tabulates data + Assists with coordinating data transfer and updating shared data sources among departments + Utilizes analytical software to discover trends in operational data and reports + Applies skills and concepts to ensure data integrity, data reliability and data accessibility throughout the group + Compiles data, communicates, and provides information to engineers + Ability to use Excel, Spotfire, Power Bi and/or other analytical software for data manipulation + Performs other duties as assigned ## **Job Specific Skills** + Basic ability to use rigorous logic, critical thinking skills, and methods to solve difficult problems with effective solutions + Basic ability to build numerical and analytical tools using standard industry and corporate software + Basic knowledge of Drilling, Completion, and Workover reports + Basic knowledge of PC/mainframe systems + Basic knowledge of database application software + Ability to use Excel and other analytical software for data manipulation ## **Education** Minimum: High school diploma or GED Preferred: Bachelor's degree \- from accredited university \- Engineering Technology, Math, Science, or related field ## **Experience** Minimum: Related work experience Expand Energy takes necessary action to ensure that all applicants are treated without regard to their race, color, religion, sex, sexual orientation, age, gender identity, national origin, genetic information, disability, pregnancy, military or veteran status or any other protected characteristic as established by law\. Expand Energy Corporation's operations are focused on discovering and developing its large and geographically diverse resource base of unconventional oil and natural gas assets onshore in the United States\. **Nearest Major Market:** Oklahoma City **Nearest Secondary Market:** Oklahoma **Job Segment:** Gas, Gas Technician, Mainframe, Database, Energy, Entry Level, Technology

Who We Are Kirby-Smith Machinery, Inc. is a leading distributor of heavy equipment and cranes in the central United States. We are at the forefront of today's construction industry growth and have several exciting job opportunities for talented, energized professionals across the region who want to join our #WeAre1KirbySmith family! Machine Control Technician Benefits Above-Average Industry Pay Comprehensive Benefits Package (including Medical/Dental/Vision) 401K Plans with Company Match Generous PTO Package/Paid Holidays Short/Long Term Disability Growth Opportunities Paid Training Family-Owned and Operated Health and Wellness Machine Control Technician Position Purpose Responsible for supporting customers' needs in addition to training, troubleshooting, installing, and repairing machine control systems and providing technical assistance with factory field control integration, Komatsu Smart Construction products, Topcon's aftermarket machine control products and other products related to machine control and technology Machine Control Technician Essential Functions Communicates and supports the Kirby Smith vision and core values of One Mission, One Team, One Plan, One Goal Installs, removes, troubleshoots, and repairs the grade control systems utilized in equipment sold, rented, and serviced Coordinates grade control demonstrations with the internal sales force and customers Provides product support and training during demonstrations in addition to after-sale support and training Develops and maintains a complete working knowledge of the manufacturer's smart construction products as well as Topcon Grading Systems Develops an awareness of the competition and competitive products and industry trends Understands customer's overall equipment needs and identifies new areas of business opportunity Sells equipment, parts, accessories, rentals, and service as a total customer solution and build long-term relationships within the territory to maximize customer and company profitability Provides timely follow-up with customers and the sales team to ensure the best possible customer experience Uses company systems and tools to document, track, follow up and capture all sales and product support activity in a timely and accurate manner Performs other job-related duties as assigned Ensures consistent and reliable on-site attendance Machine Control Technician Minimum Qualifications High School Education or equivalent Minimum two (2) years of experience with electronics, mechanical, hydraulics, or electrical Ability to learn heavy equipment operation for the purpose of demonstration and training. Knowledge of and experience with GPS products preferred Experience in problem-solving technical issues preferred Proficient with using computer networks, systems, and software Land/Construction Surveying knowledge with the ability to utilize land/construction surveying equipment a plus Ability to weld and knowledge/understanding of machine hydraulic systems a plus Machine Control Technician Physical Requirements Pushing/Pulling/Lifting/Carrying up to 50 pounds without assistance Physical ability to squat, twist, turn, bend, stoop, climb, and reach overhead Must be able to work in extreme heat or cold and/or wet, damp, dusty, or windy conditions and tolerate exposure to typical noises, hazardous materials, and fumes/odors Physical ability to perform maintenance on equipment for extended hours of time with continual mounting and dismounting throughout the workday Ability to adhere to personal protective equipment (PPE) policy and maintain individual PPE in a functional condition This is considered a Safety-Sensitive position. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Benefits: Competitive Wages Tools Provided Uniforms Provided Company Vehicle Paid Training Flexibility Career Advancement Opportunities Growing Industry Health insurance Paid time off Job Title: Access Control Technician Reports To: General Manager or Franchise Owner Do you feel like your hard work goes unnoticed or unappreciated! Key Areas of Responsibility: The Access Control Technician position is an integral part of FlyLock Security Solutions - Oklahoma City and is key to the growth of the company. All Access Control Technicians must have the ability to work well in a high-paced working environment. The individual must work well as part of the team and independently from the FlyLock owner. The Access Control Technician position is a hands-on technical position geared toward an individual who has a technical mindset. Ideal candidates will have locksmithing knowledge and demonstrate the ability to learn new technical methods and techniques. Requirements/Responsibilities Minimum of 2 years experience in technical hands-on field experience in security solutions, access control, door hardware, and other skilled trades. Inspects, installs, and services all basic and complex commercial and residential access and video systems. Performs advanced, complex troubleshooting and repair functions for commercial and residential access and video systems such as programming; cleaning detectors; testing controls and peripheral devices; mounting, replacing, and testing equipment according to specifications; running cable, etc. Instructs customers in access and video systems operation by recommending ways to use additional features and capabilities of system installations. Respond to customer questions and requests. Recommend corrective services to adjust customer complaints. Diffuses difficult and complex customer issues. Builds and maintains working relations with the sales staff. Defines the scope of add-ons and change orders, seeks customer approval, and writes up paperwork. Performs site visits with sales consultants for existing or potential clients. Takes responsibility for the project from first walk-through to final sign-off and hand-offs to service. Maintains accurate records of all inspections/service calls and troubleshooting as required including documentation and updating paperwork. Acts as onsite project lead to meet project timelines and goals and oversees lead technicians, technicians, apprentices, and subcontractors. Other duties as required by management. Nice to Have: Experience with systems mentioned below is useful but not all required. Access Control - Avigilon ACM, Linear Emerge3 &50P, S2, Lenel Kantech, Honeywell WinPak, DSX, Maxxess Access, AMAG Symetry, Keyscan System7, Brivo, OpenPath Credentials and Biometrics - HID, Aptiq, AWID, Suprema, BioConnect, MyIris, IrisID, LG Iris, Schlage, L1 Indenity, NEDAP, TRES443/900 Long Range Readers, Object Detection CCTV - Exacq, Avigilon , Axis, Arecont, ACTi, Pelco, HikVision, Dahua, LPR Lock Hardware HES, Rutherford, Schlage, Allegion Brands, Assa Brands, SDC Controls, Lock Retrofit Kits, Magnetic Locks, Electrified Trim Sets, Electrified Crash Bars, Electrified Strikes, Electrified Handsets, Schlage NDE Networks - Netgear, Dlink , Ubiquit, Fiber Optics, SPF Modules, Fiber Optic Testing and Termination Wireless- Ubiquiti, Firetide, Fluid Mesh Physical Requirements: Must be able to fluently understand, speak, and write English. Ability to push, pull, and lift at least 50 lbs. Ability to kneel, crouch and stoop. Ability to reach above and below the shoulders. Ability to use hands and fingers to grasp, twist, and pull. Ability to climb a ladder and work above ground. Withstand external weather conditions year-round. Compensation: $40,000.00 - $60,000.00 per year The Flying Locksmiths and FlyLock Security Solutions franchise network of security specialists provide access control systems, commercial locksmith services and door security solutions nationwide. We blend traditional values with the latest advancements in technology to ensure our life safety and security solutions meet the precise needs of clients. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchise. All inquiries about employment at this franchise should be made directly to the franchise location, and not to FlyLock Security Solutions Corporate.

Job DescriptionLocation: OKC Electrical Technician Pay Rate and Hours: $22-25/hr Monday through Friday, OT as needed, Regular hours: 6am-2:30pm, OT hours: 5am-3:30pm. We're looking for an experienced Electrical Technician to join our growing team! This is a hands-on role working with industrial electrical systems, PLCs, VFDs, and control panels. The ideal candidate has solid troubleshooting skills, works safely, and can interpret complex electrical schematics. If you've spent most of your career in residential or commercial electrical work, this position will not be a fit - we're looking for candidates with industrial or manufacturing experience. Electrical Technician Responsibilities: Install, maintain, and repair industrial electrical systems and equipment Wire and troubleshoot control panels, VFDs, and PLCs Read and interpret electrical drawings, blueprints, and schematics Diagnose and resolve electrical and automation issues Perform preventive maintenance to minimize downtime Follow all company and OSHA safety procedures Communicate clearly with team members and supervisors Electrical Technician Qualifications: Minimum 3 years of electrical experience (industrial required) Hands-on experience with PLCs, VFDs, and control wiring Ability to read and understand schematics and technical documentation Strong troubleshooting and problem-solving abilities Able to communicate and understand English clearly Dependable and self-motivated with a positive attitude This is a temp to hire position. Key Personnel Benefits: While on Key Personnel's payroll, you can access Key's benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more! Apply today! In order to make the best use of your time, only qualified applicants will be contacted. Our office is at 5600 N. May Ave. Suite 310, Regus Building, Oklahoma City, OK 7311. It is located on the third floor of the Regus Building. Take a right off the elevators. Please bring a resume and ID to complete the I-9 form between the hours of 9 am and 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.#INDLIOK46

We are recruiting for an Electronic Technician I for our client, an award-winning small business dedicated to providing innovative products and services in many areas, including information technology, management consulting, and logistics, for customers including the FAA, DOD, and state governments. This is an onsite position in Oklahoma City, Oklahoma. Responsibilities of the Electronic Technician Support various FAALC Group/Product Divisions to help assure that electronic systems, subsystems, and components meet serviceability, reliability, and availability requirements. Complete all tasks in accordance with applicable FAA and FAALC standards, orders, technical instructions, and quality procedures. Electronic component level troubleshooting and repair of circuit card assemblies. Through-hole and surface mount soldering. Circuit board repair (trace work, eyelet repair) Troubleshoot, repair, and test electronic components and equipment so as to return unserviceable equipment to serviceable status. Item disassembly/assembly, circuit analysis, item repair, and parts replacement with possible performance analysis. Complete applicable calibration, testing, and certification processes. Assemble cables, wiring harnesses, circuit cards, and other electronic assemblies and components based on FAALC-provided technical documentation. Install electrical, electronic, and mechanical systems, subsystems, components, test fixtures, modifications and engineering prototypes. Perform adjustment, test, and certification functions for this equipment. Qualifications for the Electronic Technician position An associate degree in electrical or engineering technology, or completion of equivalent formal technical training courses, is required. Specialized knowledge of FAA systems, equipment, procedures, and operations is highly desired. Knowledge of producing, reviewing, revising, and interpreting technical documents. Knowledge of designing, fabricating, assembling, troubleshooting, and repairing electrical, electronic, and mechanical systems, subsystems, components, test fixtures, and prototypes. Knowledge of developing and performing equipment and component adjustment, test, and certification processes; and in installing equipment and modifications. Experience using a multi-meter and oscilloscope. Ability to read and follow electronic paths in a schematic. Must Possess excellent communications skills.

Job DescriptionPLC Controls Technician Location: Oklahoma City, OK | Type: Full-Time | Industry: Manufacturing Target Salary: $24+/ hour, depending on experience Why This Opportunity Stands Out Work on modern automation systems that directly keep production running and efficient Be the go-to technical expert solving real-time equipment problems and improving reliability Join a hands-on maintenance team where your work is visible, valued, and impactful What You'll Be Doing Program, troubleshoot, and support PLC-controlled equipment and operator screens to minimize downtime Maintain and improve plant control systems, including drives, sensors, and industrial communications networks Support automation projects and document system changes, backups, and troubleshooting work for long-term stability What We're Looking For Proven experience programming and troubleshooting PLCs in an industrial or manufacturing environment Hands-on background with HMI systems and electrical controls for automated equipment Strong ability to diagnose equipment issues and support production teams during urgent downtime situations Equal Employment Opportunity #MPIAJ

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: The Well Control Technician is primarily responsible for working on well control equipment, assembly/disassembly of choke manifolds, performing inspections and preventative maintenance on BOP equipment. This position is on call for any urgent field related issues. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you need: * Thorough knowledge of BOP and well control equipment * Thorough knowledge of field inspections as related to BOP and well control equipment * Good written and oral communication skills with the ability to communicate effectively * Basic PC-based software application skills: excel, word, etc. * Ability to travel (valid driver's license required) * High school diploma or GED and 1-3 years of well control or BOP/drilling rig experience Application Deadline: Applications are accepted on an ongoing basis. * The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. * Comprehensive medical, dental, vision, and life insurance * Flexible Spending or Health Savings Accounts * 401k match * Paid Leave Plans * Parental & Adoption Benefits * Disability Coverage * Employee Assistance Program * Educational Assistance * Learning & Development Opportunities * Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Salary Guidelines: (Minimum - Maximum) $20 - $32 For more information on benefits, please visit Careers | Helmerich & Payne, Inc. (helmerichpayne.com) Thank you for your interest in joining our team!

The Part-Time Electrician Engineering Technician provides engineering and installation support to the customer. This position provides construction and operation system support for the installation and engineering of various electrical power equipment and fuel systems. This position will travel up to 80% of the time. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS Must be able to pass a background investigation. Must be able to travel up to 80% of the time. CDL license preferred. Obtain and maintain required state and local licenses for electrical work preferred. Experience working as an electrical technician focusing on power distribution systems. Experience in a construction related discipline such as utility installation, general electrical, heavy equipment operation, welding, concrete, and mechanical required. Relevant experience includes working with engineers and experience in writing / revising technical documentation for electronical systems and equipment and experience on power systems and equipment is preferred, as well as commercial electrical, lightning protection, fuel storage tank and engine generator. KEY DUTIES AND RESPONSIBILITIES Essential Duties and responsibilities include the following. Other duties may be assigned. Guarantees the enhancement and/or maintenance of existing power systems at various facilities. Independently provides support in the demolition and disposal of current powers system equipment, such as EG, UPS, electrical distribution equipment, fuel systems and fuel tanks. Examines and provides maintenance services for existing powers systems. Aids in the development and preservation of the overall production schedule for project deliverables. Provides technical and administrative support for engineering services. Supports the development of specifications for installation and data documentation used in the Site Survey process. Assists in surveys of existing power systems and associated equipment as well as the physical facility for adequacy of exiting equipment and to ensure new power system requirements are accommodated at all facilities. Troubleshoots failures in equipment and systems. Analyzes and conducts performance tests of electrical systems. Assists in engineering technical documentation. Assists in survey reports with assessments and technical data in accordance with customer program. Installs specific electrical power system equipment installations that are included but not limited to: engine generators (EG), EG fuel system(s), EG fuel tank(s), Uninterruptible Power Supply(s) (UPS), Static Transfer Switch, electrical distribution equipment, and associated power system support equipment such as, power systems control hardware/software, HVAC, physical facility, and lighting. Helps provide construction estimates, schedules, and project oversight. Organizes and inspects construction related tasks (i.e., utility installation, general electrical, heavy equipment operation, welding, mechanical, etc.). Performs installation of various electrical systems included but not limited engine generators (EG), EG fuel system(s), EG fuel tank(s), Uninterruptible Power Supply(s) (UPS), Static Transfer Switch, electrical distribution equipment, associated power system support equipment such as, power systems control hardware/software, HVAC, physical facility, and lightning protection. Ensures all safety requirements are met by the customer and OHSA standards. Coordinates with the customer the installation and scheduling requirements for various power and fuel systems. Travels to client sites up to 80% of the time. EDUCATION AND EXPERIENCE High school diploma or general education degree (GED) and a minimum of two to four (2-4) years of relevant experience and/or training, or equivalent combination of education/experience. PHYSICAL DEMANDS The physical ability to stand and or walk frequently. May climb on a ladder or scaffolding to heights in excess of 10'. Bend/stoop, push/pull and work above the shoulder frequently. Occasionally balance, kneel, crouch, and squat. May carry up to 25 pounds of weight distances of up to 50 feet at a time, occasionally up to and including 50 pounds of weight distances of 25' and rarely up to 50 pounds distances of 5'. Occasionally lifts up to 50 pounds of weight from the floor to the waist. This weight will be constituted by the following items, but not limited to them: tools, toolboxes and tool bags, ladders, motors, supplies and equipment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet CNI offers a comprehensive benefits package that includes: Medical Dental Vision 401(k) Family Planning/Fertility Assistance STD/LTD/Basic Life/AD&D Legal-Aid Program Employee Assistance Program (EAP) Paid Time Off (PTO) - (11) Federal Holidays Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI).

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Job Description Technical Systems Support Services:The Contractor shall perform troubleshooting, tear-down, repair, refurbishment, overhaul, assembly, testing, and installation services for designated equipment at the request of FAALC Product Divisions or Groups. Labor categories required to provide these services may include Electronics Technicians and Engineering Technicians as necessary to meet specific task requirements. Engineering Technician Services: The Contractor shall provide engineering technician services to the various FAALC Product Divisions to help assure that electrical, electronic, and mechanical equipment meets serviceability, reliability, and availability requirements. These services may include tasks such as: assembling, repairing and refurbishing equipment, components, test fixtures, and prototypes; performing equipment performance analyses and data collection and reporting; and installing equipment and modifications. The Contractor shall complete all tasks in accordance with applicable FAA and FAALC standards, orders, technical instructions, and quality procedures. Equipment Assembly and Repair: The Contractor shall assemble and repair electrical, electronic, and mechanical systems, subsystems, and components. Equipment assembly processes may require a combination of design, fabrication, and/or construction functions for items such as power and signal cables, circuit boards, electrical and mechanical components, test fixtures, and engineering prototypes. Equipment repair processes may include functions such as performance analysis, equipment disassembly/assembly, troubleshooting and correction of electrical, electronic, or mechanical malfunctions, parts replacement, painting and composite structures. The Contractor shall complete applicable adjustment, testing, and certification processes on all items assembled or repaired. All process functions shall be performed and documented as specified in the technical documentation applicable to the system/subsystem/component. Equipment Performance Analyses and Data Collection: The Contractor shall perform equipment and component performance analyses to determine operating characteristics and parameters, to aid in fault isolation and identification, and to verify equipment functions under variable conditions. The Contractor shall collect and record appropriate engineering data to document results of the analyses. The Contractor shall also extract, produce, compile, and present a variety of systems data and logistics support information obtained from various sources. Equipment Installation: The Contractor shall install electrical, electronic, and mechanical systems, subsystems, components, test fixtures, modifications and engineering prototypes. The Contractor may be required to perform adjustment, test, and certification functions for this equipment. Responsibilities NAVAID antenna and component repair and overhaul. Rotary joint and drive motor troubleshooting and repair. Circuit board testing and repair Production and repair of electronic cables and wire harnesses. Performing equipment performance analyses, and information collection and reporting. Performing equipment adjustment, testing, and certification. Installation of equipment and components, and modifications. Installation and maintenance of NAS Radomes. Structural inspection of towers and tower components at heights in excess of 50 feet, but not to exceed 750 feet. Maintenance on the inside and outside of tower structures at heights in excess of 50 feet, but not to exceed 750 feet. Labor includes, but not limited to, installation, removal and maintenance of communication antennae, surveillance systems, safety wire, tower guy wire pull-off shackles and tower obstruction lighting systems. Moderate lifting and carrying (50 lbs.), straight pushing and pulling, reaching above shoulders, use of fingers and both hands required, walking and standing, repeated bending, climbing, crawling, kneeling (use of both legs and arms), operation of crane, truck, tractor, or motor vehicle, both eyes required with depth perception and ability to distinguish basic colors and shades of colors, hearing (aid permitted). Attend all Training Classes as required to maintain sufficient knowledge of repair procedures for all systems including all Safety related courses. Support Preventive Maintenance, (PM's) on FAA and interagency systems, in accordance with local and FAA policy and procedures. Support Corrective Maintenance, (CM's) on FAA and interagency systems in accordance with local and FAA policy and procedures. Perform basic troubleshooting of electronic/electro-mechanical systems to include fault isolation, removal, and replacement of failed Line Replaceable Units, (LRU's) required to return the system to full operational capability. Training, procedures, or guidance will be provided. Prepare FAA and interagency assets for shipment to and from field site, vendor locations and/or Federal Aviation Administration Logistic Center, (FAALC). Enters time into Data Collection and Reporting System (DCRS) daily to ensure timely billing of hours. Keeps Crew Leads informed of assigned tasks and status. Tower Climbing / Work at heights in excess of 50'. Performing corrosion control and prevention. Operation of equipment such as boom man lifts and motorized forklifts. Working from ropes at heights. Installation of electronic and mechanical systems and components on NAS and Inter-Agency systems. Due to the limitations of fall protection gear, the minimum weight for an applicant is 125lbs, the maximum weight is 290lbs. Position requires traveling, up to 70%, and may entail emergency call outs for corrective maintenance as required. Assists crew lead with workload scheduling and planning. Meets with internal customers and may coordinate with external customers regarding projects. Assists junior technicians with technical tasks and may be required to provide on the job training. Assists crew lead in project package reviews and provides feedback to internal customers. Additional Qualifications/Responsibilities Qualifications An associate degree in electrical or engineering technology and completion of formal technical training courses is required for level II. Due to safety and operational requirements mandated by our government customer, all engineering technicians are required to successful complete a physical fitness evaluation, which includes specific weight restrictions of minimum 125lbs and maximum of 290lbs. Practical experience in an engineering technician support position is required. This experience must include assisting in developing, reviewing, and updating engineering documentation and processes, and in troubleshooting, repairing, assembling, testing, and installing electrical, and mechanical systems and equipment. Assisting in producing, reviewing, revising, and interpreting technical documents; assisting in designing, fabricating, assembling, troubleshooting, and repairing electrical, electronic, and mechanical systems, subsystems, components, test fixtures, and prototypes. Developing and performing equipment and component adjustment, test, and certification processes; and in installing equipment and modifications. NACI Clearance - ability to obtain Public Trust. Estimated Monthly Travel required for this position: 70%. A valid drivers license is required. Must possess TWO forms of unexpired identification to meet eligibility requirements. One Primary form of government-issued identification, selected from the following: Valid REAL ID-compliant driver's license or state-issued ID card. U.S. Department of Transportation (DOT) Transportation ID Card. U.S. Passport or U.S. Passport Card. Permanent Resident Card (Form I-551). U.S. Military or U.S. Military dependent's ID Card with photograph. U.S. Government Personal Identity Verification (PIV) Card. One secondary form of identification, such as: Social security card. Original or certified copy of a birth certificate. certificate of U.S. Citizenship or Naturalization. Voter registration card. Desired Qualifications: Rope repelling / on rope work at heights. Specialized knowledge of FAA systems, equipment, procedures, and operations is highly desired. Installation of electronic and mechanical systems and components. Preventative maintenance and replacement of tower, radome and cab glass components. Installation of electronic and mechanical systems and components. Experience with: Operation of boom man lifts. Operation of motorized forklift. Ability to work at heights. Completion of trip reports.

Clean parts, inspects, assembles, disassembles and tests engines. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Inspects and qualifies engine parts using various measuring and test equipment Disassemble, clean and reassemble engines using tools, hand tools, semi-automated and fully-automated equipment. Records various data in process via manual and electronic methods. Perform operator preventative maintenance on assigned equipment. Clean and maintain orderly work area. Recommends measures to improve production methods, equipment performance, and quality of product. Responsible for adherence to the policies, procedures and instructions of the TS 16949 and ISO 14001 systems. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand for multiple hours at a time. The employee frequently is required to use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee will frequently perform tasks requiring forceful repetitive grasping. The employee is occasionally required to walk for extended periods of time; bend; stoop; kneel or crouch and talk or hear. The employee must frequently lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision. Must be able to read and understand English. WORK ENVIRONMENT While performing the duties of this job, the employee occasionally works near moving mechanical parts and is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. MATERIALS Transmission parts, transmission fluid, assembly lubes, sealing/locking compounds, solvent and aqueous based cleaning and paint products. WORKING PROCEDURE Detailed Job Instruction Sheet at workstation. ATC Drivetrain is an equal opportunity employer

Job Description HiFyve is hiring for Electrical Technicians in Shawnee, OK. 1st, 2nd & 3rd Shift openings: 1st Shift: 7am-3pm 2nd Shift: 3pm-11pm 3rd Shift: 11pm-7am Pay very much depends on experience & skills: $25/hr. - $37/hr. Full benefits Relocation assistance is offered for candidates that can do a full automation on a machine. Position Summary The Electrical Technician will support configuration, maintenance, and optimization of electrical and control systems, focusing on tube production, coil winding, and press operations. The role is part electrical troubleshooting and part controls maintenance. Key Responsibilities Tune, calibrate, maintain, and troubleshoot PLCs, HMIs, sensors, and control panels linked to tube forming, coilers & winders, pressing machinery, melting, and casting equipment. Monitor and maintain instrumentation: pressure, temperature, flow, safety shutdowns, and sensor network reliability. Read and interpret schematics, blueprints, wiring diagrams, and control logic specifications. Assist with installations, modifications, and upgrades of control systems and electrical hardware. Support predictive/performance testing of machines, collect control data, participate in root cause analysis of control/electrical issues. Maintain compliance with all electrical safety standards and control system documentation. Provide support for operators and maintenance teams to diagnose intermittent or recurring issues in electrical/control domain. Qualifications / Requirements High School Diploma or GED required; technical certificate or diploma in electrical technology or controls preferred. Minimum 2-4 years' experience in electrical/control systems in manufacturing or tubular/metal production environment. Experience with PLC programming / troubleshooting, HMI, instrumentation, sensors. Comfortable reading electrical schematics, control wiring, and basic networked systems. Strong troubleshooting skills: ability to isolate electrical or control issues quickly. Good communication, working in collaboration with production & maintenance teams. If you are interested, please apply!

Love fixing tech and want a job on the go? Join uBreakiFix by Asurion as a Field Technician and get paid to travel locally, solve tech problems, and make customers smile-all while growing your skills and career. Why You'll Love It: Starts at $15/hr monthl incentive Health, dental, vision & life insurance Paid time off Ongoing training & career development Your office is our company van-freedom & flexibility What You'll Do: Drive a fully equipped repair van to customer locations Diagnose and repair smartphones, tablets & other tech Deliver friendly, in-home service experiences Promote device protection + support plans What You'll Bring: Experience in customer service, tech repair, or retail Comfortable driving and working independently Basic mobile OS/hardware knowledge and soldering Great communication + problem-solving skills Flexible availability (retail hours + weekends) If you're tech-savvy, customer-obsessed, and ready to hit the road, and start building your career, one repair at a time. uBreakiFix by Asurion is proud to be an equal-opportunity employer, committed to providing equal employment opportunities regardless of race, color, ancestry, religion, gender, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status.

The Part-Time Electrician Engineering Technician provides engineering and installation support to the customer. This position provides construction and operation system support for the installation and engineering of various electrical power equipment and fuel systems. This position will travel up to 80% of the time. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS * Must be able to pass a background investigation. * Must be able to travel up to 80% of the time. * CDL license preferred. * Obtain and maintain required state and local licenses for electrical work preferred. * Experience working as an electrical technician focusing on power distribution systems. * Experience in a construction related discipline such as utility installation, general electrical, heavy equipment operation, welding, concrete, and mechanical required. * Relevant experience includes working with engineers and experience in writing / revising technical documentation for electronical systems and equipment and experience on power systems and equipment is preferred, as well as commercial electrical, lightning protection, fuel storage tank and engine generator. KEY DUTIES AND RESPONSIBILITIES Essential Duties and responsibilities include the following. Other duties may be assigned. * Guarantees the enhancement and/or maintenance of existing power systems at various facilities. * Independently provides support in the demolition and disposal of current powers system equipment, such as EG, UPS, electrical distribution equipment, fuel systems and fuel tanks. * Examines and provides maintenance services for existing powers systems. * Aids in the development and preservation of the overall production schedule for project deliverables. * Provides technical and administrative support for engineering services. Supports the development of specifications for installation and data documentation used in the Site Survey process. * Assists in surveys of existing power systems and associated equipment as well as the physical facility for adequacy of exiting equipment and to ensure new power system requirements are accommodated at all facilities. * Troubleshoots failures in equipment and systems. * Analyzes and conducts performance tests of electrical systems. * Assists in engineering technical documentation. * Assists in survey reports with assessments and technical data in accordance with customer program. * Installs specific electrical power system equipment installations that are included but not limited to: engine generators (EG), EG fuel system(s), EG fuel tank(s), Uninterruptible Power Supply(s) (UPS), * Static Transfer Switch, electrical distribution equipment, and associated power system support equipment such as, power systems control hardware/software, HVAC, physical facility, and lighting. * Helps provide construction estimates, schedules, and project oversight. * Organizes and inspects construction related tasks (i.e., utility installation, general electrical, heavy equipment operation, welding, mechanical, etc.). * Performs installation of various electrical systems included but not limited engine generators (EG), EG fuel system(s), EG fuel tank(s), Uninterruptible Power Supply(s) (UPS), Static Transfer Switch, electrical distribution equipment, associated power system support equipment such as, power systems control hardware/software, HVAC, physical facility, and lightning protection. * Ensures all safety requirements are met by the customer and OHSA standards. * Coordinates with the customer the installation and scheduling requirements for various power and fuel systems. * Travels to client sites up to 80% of the time. EDUCATION AND EXPERIENCE High school diploma or general education degree (GED) and a minimum of two to four (2-4) years of relevant experience and/or training, or equivalent combination of education/experience. PHYSICAL DEMANDS The physical ability to stand and or walk frequently. May climb on a ladder or scaffolding to heights in excess of 10'. Bend/stoop, push/pull and work above the shoulder frequently. Occasionally balance, kneel, crouch, and squat. May carry up to 25 pounds of weight distances of up to 50 feet at a time, occasionally up to and including 50 pounds of weight distances of 25' and rarely up to 50 pounds distances of 5'. Occasionally lifts up to 50 pounds of weight from the floor to the waist. This weight will be constituted by the following items, but not limited to them: tools, toolboxes and tool bags, ladders, motors, supplies and equipment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet CNI offers a comprehensive benefits package that includes: * Medical * Dental * Vision * 401(k) * Family Planning/Fertility Assistance * STD/LTD/Basic Life/AD&D * Legal-Aid Program * Employee Assistance Program (EAP) * Paid Time Off (PTO) - (11) Federal Holidays * Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI).

Job Title Engineering Tech Adjunct Instructor - In Person at Yukon High School The Department of Engineering Technology at SWOSU seeks qualified individuals to serve as adjunct instructors for in-person sections of engineering technology courses, including, but not limited to, TECH 2213 (2D CAD). Adjunct positions at SWOSU are part-time teaching positions. This posting is to create a pool of interested applicants from which the Department may draw as sections become open at any point in the current academic year. This posting may or may not result in the hiring of adjuncts. The successful candidate will be responsible for: * Teaching undergraduate Engineering Technology courses; * Weekly office hours appropriate to course load; * Assessing student outcomes; and * Participating in departmental assessment for ABET objectives. About SWOSU: With locations in Weatherford, Yukon, Sayre, and online degree programs, SWOSU is one of the leading regional universities in the country. See what makes SWOSU and Weatherford so great! Education and Experience * A graduate degree in Engineering or a related field is required. Master's degree adjunct are paid at a rate of $715/credit hour; Master's degree + 30 hours at $800/credit hour; Doctoral at $950/credit hour. * Prior teaching experience at the collegiate level is preferred. * Technological competence and experience in the LMS Canvas is preferred. * Quality Matters certification preferred. Anticipated Start Date 8/11/2025 Location Yukon Employment Type Exempt

The Electrician Engineering Technician provides engineering and installation support to the customer. This position provides construction and operation system support for the installation and engineering of various electrical power equipment and fuel systems. This position will travel up to 80% of the time. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS Must be able to pass a background investigation. Must be able to travel up to 80% of the time. CDL license preferred. Obtain and maintain required state and local licenses for electrical work preferred. Experience working as an electrical technician focusing on power distribution systems. Experience in a construction related discipline such as utility installation, general electrical, heavy equipment operation, welding, concrete, and mechanical required. Relevant experience includes working with engineers and experience in writing / revising technical documentation for electronical systems and equipment and experience on power systems and equipment is preferred, as well as commercial electrical, lightning protection, fuel storage tank and engine generator. KEY DUTIES AND RESPONSIBILITIES Essential Duties and responsibilities include the following. Other duties may be assigned. Guarantees the enhancement and/or maintenance of existing power systems at various facilities. Independently provides support in the demolition and disposal of current powers system equipment, such as EG, UPS, electrical distribution equipment, fuel systems and fuel tanks. Examines and provides maintenance services for existing powers systems. Aids in the development and preservation of the overall production schedule for project deliverables. Provides technical and administrative support for engineering services. Supports the development of specifications for installation and data documentation used in the Site Survey process. Assists in surveys of existing power systems and associated equipment as well as the physical facility for adequacy of exiting equipment and to ensure new power system requirements are accommodated at all facilities. Troubleshoots failures in equipment and systems. Analyzes and conducts performance tests of electrical systems. Assists in engineering technical documentation. Assists in survey reports with assessments and technical data in accordance with customer program. Installs specific electrical power system equipment installations that are included but not limited to: engine generators (EG), EG fuel system(s), EG fuel tank(s), Uninterruptible Power Supply(s) (UPS), Static Transfer Switch, electrical distribution equipment, and associated power system support equipment such as, power systems control hardware/software, HVAC, physical facility, and lighting. Helps provide construction estimates, schedules, and project oversight. Organizes and inspects construction related tasks (i.e., utility installation, general electrical, heavy equipment operation, welding, mechanical, etc.). Performs installation of various electrical systems included but not limited engine generators (EG), EG fuel system(s), EG fuel tank(s), Uninterruptible Power Supply(s) (UPS), Static Transfer Switch, electrical distribution equipment, associated power system support equipment such as, power systems control hardware/software, HVAC, physical facility, and lightning protection. Ensures all safety requirements are met by the customer and OHSA standards. Coordinates with the customer the installation and scheduling requirements for various power and fuel systems. Travels to client sites up to 80% of the time. EDUCATION AND EXPERIENCE High school diploma or general education degree (GED) and a minimum of two to four (2-4) years of relevant experience and/or training, or equivalent combination of education/experience. PHYSICAL DEMANDS The physical ability to stand and or walk frequently. May climb on a ladder or scaffolding to heights in excess of 10'. Bend/stoop, push/pull and work above the shoulder frequently. Occasionally balance, kneel, crouch, and squat. May carry up to 25 pounds of weight distances of up to 50 feet at a time, occasionally up to and including 50 pounds of weight distances of 25' and rarely up to 50 pounds distances of 5'. Occasionally lifts up to 50 pounds of weight from the floor to the waist. This weight will be constituted by the following items, but not limited to them: tools, toolboxes and tool bags, ladders, motors, supplies and equipment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet CNI offers a comprehensive benefits package that includes: Medical Dental Vision 401(k) Family Planning/Fertility Assistance STD/LTD/Basic Life/AD&D Legal-Aid Program Employee Assistance Program (EAP) Paid Time Off (PTO) - (11) Federal Holidays Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI).

Clean parts, inspects, assembles, disassembles and tests engines. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Inspects and qualifies engine parts using various measuring and test equipment Disassemble, clean and reassemble engines using tools, hand tools, semi-automated and fully-automated equipment. Records various data in process via manual and electronic methods. Perform operator preventative maintenance on assigned equipment. Clean and maintain orderly work area. Recommends measures to improve production methods, equipment performance, and quality of product. Responsible for adherence to the policies, procedures and instructions of the TS 16949 and ISO 14001 systems. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand for multiple hours at a time. The employee frequently is required to use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee will frequently perform tasks requiring forceful repetitive grasping. The employee is occasionally required to walk for extended periods of time; bend; stoop; kneel or crouch and talk or hear. The employee must frequently lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision. Must be able to read and understand English. WORK ENVIRONMENT While performing the duties of this job, the employee occasionally works near moving mechanical parts and is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. MATERIALS Transmission parts, transmission fluid, assembly lubes, sealing/locking compounds, solvent and aqueous based cleaning and paint products. WORKING PROCEDURE Detailed Job Instruction Sheet at workstation. ATC Drivetrain is an equal opportunity employer

The Electrician Engineering Technician provides engineering and installation support to the customer. This position provides construction and operation system support for the installation and engineering of various electrical power equipment and fuel systems. This position will travel up to 80% of the time. Chickasaw Nation Industries, Inc. serves as a holding company with multiple subsidiaries engaged in several lines of business (Technology, Infrastructure & Engineering, Health, Manufacturing, Public Safety, Consulting, and Transportation) for the federal government and commercial enterprises. A portion of our profits is used to support Chickasaw citizens. We are proud to support the economic development and long-term viability of the Chickasaw Nation and its people. CNI offers premium benefits eligible on the first day of hire to full time employees; (Medical - Dental - Vision), Company Life Insurance, Short-Term and Long-Term Disability Insurance, 401(K) Immediate Vesting, Professional Development Assistance, Legal Aid Assistance Program, Family Planning / Fertility Assistance, Personal Time Off, and Observance of Federal Holidays. As a federal contractor, CNI is a drug-free workplace and adheres to the Federal Controlled Substance Act. ESSENTIAL REQUIREMENTS * Must be able to pass a background investigation. * Must be able to travel up to 80% of the time. * CDL license preferred. * Obtain and maintain required state and local licenses for electrical work preferred. * Experience working as an electrical technician focusing on power distribution systems. * Experience in a construction related discipline such as utility installation, general electrical, heavy equipment operation, welding, concrete, and mechanical required. * Relevant experience includes working with engineers and experience in writing / revising technical documentation for electronical systems and equipment and experience on power systems and equipment is preferred, as well as commercial electrical, lightning protection, fuel storage tank and engine generator. KEY DUTIES AND RESPONSIBILITIES Essential Duties and responsibilities include the following. Other duties may be assigned. * Guarantees the enhancement and/or maintenance of existing power systems at various facilities. * Independently provides support in the demolition and disposal of current powers system equipment, such as EG, UPS, electrical distribution equipment, fuel systems and fuel tanks. * Examines and provides maintenance services for existing powers systems. * Aids in the development and preservation of the overall production schedule for project deliverables. * Provides technical and administrative support for engineering services. Supports the development of specifications for installation and data documentation used in the Site Survey process. * Assists in surveys of existing power systems and associated equipment as well as the physical facility for adequacy of exiting equipment and to ensure new power system requirements are accommodated at all facilities. * Troubleshoots failures in equipment and systems. * Analyzes and conducts performance tests of electrical systems. * Assists in engineering technical documentation. * Assists in survey reports with assessments and technical data in accordance with customer program. * Installs specific electrical power system equipment installations that are included but not limited to: engine generators (EG), EG fuel system(s), EG fuel tank(s), Uninterruptible Power Supply(s) (UPS), * Static Transfer Switch, electrical distribution equipment, and associated power system support equipment such as, power systems control hardware/software, HVAC, physical facility, and lighting. * Helps provide construction estimates, schedules, and project oversight. * Organizes and inspects construction related tasks (i.e., utility installation, general electrical, heavy equipment operation, welding, mechanical, etc.). * Performs installation of various electrical systems included but not limited engine generators (EG), EG fuel system(s), EG fuel tank(s), Uninterruptible Power Supply(s) (UPS), Static Transfer Switch, electrical distribution equipment, associated power system support equipment such as, power systems control hardware/software, HVAC, physical facility, and lightning protection. * Ensures all safety requirements are met by the customer and OHSA standards. * Coordinates with the customer the installation and scheduling requirements for various power and fuel systems. * Travels to client sites up to 80% of the time. EDUCATION AND EXPERIENCE High school diploma or general education degree (GED) and a minimum of two to four (2-4) years of relevant experience and/or training, or equivalent combination of education/experience. PHYSICAL DEMANDS The physical ability to stand and or walk frequently. May climb on a ladder or scaffolding to heights in excess of 10'. Bend/stoop, push/pull and work above the shoulder frequently. Occasionally balance, kneel, crouch, and squat. May carry up to 25 pounds of weight distances of up to 50 feet at a time, occasionally up to and including 50 pounds of weight distances of 25' and rarely up to 50 pounds distances of 5'. Occasionally lifts up to 50 pounds of weight from the floor to the waist. This weight will be constituted by the following items, but not limited to them: tools, toolboxes and tool bags, ladders, motors, supplies and equipment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. EOE including Disability/Vet CNI offers a comprehensive benefits package that includes: * Medical * Dental * Vision * 401(k) * Family Planning/Fertility Assistance * STD/LTD/Basic Life/AD&D * Legal-Aid Program * Employee Assistance Program (EAP) * Paid Time Off (PTO) - (11) Federal Holidays * Training and Development Opportunities Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI).