Electronics technician jobs in Phoenix, AZ

Must be a US citizen. Must have Dimensional Metrology Experience. Calibrates and certifies Test, Measurement and Diagnostic Equipment (TMDE) traceable to the National Institute of Standards and Technology utilizing certified laboratory standards and manufacturer, commercial or military specifications/calibration procedures. Calibrates and troubleshoots fault isolation, adjustment and repairs using Test Measure Diagnostic Equipment (TMDE) certified laboratory standards. The candidate will be required to calibrate linear dimensional hand tools and other related equipment. Required Skills Proficient use of Microsoft Office Suite. This is an apprentice level position, and the candidate must display a positive attitude towards learning new tasks. Candidate must be detail orientated. Candidate must have strong math skills. Required Education High school diploma Required Years of Experience Requires 0-2 years of experience in the field or in a related area Desired Skills Applicable technical training, 2 years of direct experience in the field, or an associate degree in engineering technology or other relevant field or 1-year direct experience. Candidate should possess strong computer skills, experience with the following programs is a plus: Indysoft, Fluke Met/Team, Fluke Met/Track and Met/Cal experience a plus. Previous customer service experience is a plus. Familiarity with hand tools and their usage. Candidate should be proficient in High School level Algebra.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Expand your horizons, advance your career, and contribute to a secure future for generations. Northrop Grumman's Space Sector invites you to bring your pioneering spirit to our collaborative teams. As a Engineering Technician - Level 3 located in Gilbert, AZ, you'll be a linchpin in missions of paramount importance, defining the art of the possible from day one. The selected candidate will work as a Engineering Technician on the Integration & Test (I&T) of Northrop Grumman Spacecraft. This role involves performing a variety of duties assisting engineers in mechanical and electrical engineering designs, fabrication, testing, modification, and assembly of spacecraft and support equipment. **The candidate will be required to perform the following tasks:** + Draft and interpret detailed drawings for fabrication. + Fabricate, assemble, and install mechanical, electromechanical, and electronic components or assemblies. + Set up and conduct prototype unit and subsystem tests under operational conditions. + Analyze test data, identify issues, and recommend modifications. + Support critical space flight hardware integration with high attention to detail and safety. + Maintain clean room protocols, hazardous material handling, and operational procedures. + Work flexible schedules, including off shifts, weekends, overtime, and travel for launch campaigns (up to 25% domestic travel). + The ideal candidate will possess strong organizational skills, a proactive mindset, and the ability to troubleshoot and resolve technical issues independently. This role requires adaptability, precision, and a commitment to mission success. **Shift Work** - This position requires the flexibility to work alternate shifts (2nd shift and 3rd shift) and potentially weekend shifts depending on test event schedules. Advanced notice of shift change will be provided when the needs arise. Shift differential pay and overtime is available in these situations. **Travel** - This position could require up to 25% travel domestic **Basic Qualifications:** + High School Diploma and 4 years of related experience as a Electrical, Mechanical, or equivalent. + Must have the ability to obtain and maintain a DoD government clearance. active and current DoD Top Secret clearance with SCI or SAP/SAR access during the time of application. + Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Visio). + Hands-on experience with aerospace or related equipment, harness build and installation methods. + Knowledge of electrical measurements (AC/DC, resistance), voltage circuitry, and troubleshooting techniques. + Understanding of clean room operations and spacecraft handling protocols. + Ability to lift and position objects weighing up to 50 pounds. + Ability to work flexible shifts, including 2nd and 3rd shift schedules, weekends, and overtime as needed. **Preferred Qualifications:** + A&P License. + Flight hardware integration and spacecraft processing experience. + Certifications in flight wire harnessing, flight soldering, and epoxy bonding. + Familiarity with EGSE processes, test procedures, and troubleshooting support equipment. + Aerospace/Satellite Integration & Test experience. + This role is ideal for candidates seeking to grow in electro-mechanical and aerospace system integration within a dynamic and high-stakes environment. Primary Level Salary Range: $32.50 - $39.35 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job Description Title: Electronic Technician Support II (2nd Shift) Department: Digital Assembly & Test (505350) FLSA Status: Non-Exempt Level: S2 Company Overview Comtech Telecommunications Corp. is a leading global technology company providing terrestrial and wireless network solutions, next-generation 9-1-1 emergency services, satellite and space communications technologies, and cloud-native capabilities to commercial and government customers around the world. Our unique culture of innovation and employee empowerment unleashes a relentless passion for customer success. With multiple facilities located in technology corridors throughout the United States and around the world, Comtech leverages our global presence, technology leadership, and decades of experience to create the world's most innovative communications solutions. For more information, please visit **************** We're seeking curious, growth-minded thinkers to help shape our vision, structures, and systems; playing a key role as we launch into our ambitious future. If you're invigorated by our mission, values, and drive to change the world - we'd love to have you apply. Purpose: Under general supervision, perform electrical functional testing, calibration, and verification of standard products, PCBAs, and systems in accordance with established procedures. Independently identify and document failures, escalate recurring issues to leads or engineering for trend analysis, and contribute to root cause investigations. Maintain a clean and organized work environment, ensuring compliance with FOD (Foreign Object Debris) prevention protocols. This is a mid-level technician role requiring solid proficiency in electronic symbol recognition, circuit design fundamentals, and hands-on troubleshooting of moderately complex systems. Preferred qualifications include an Associate's degree or equivalent technical training, along with 2+ years of experience in RF and digital testing environments using discrete test equipment and CAT (Computer Automated Test) systems. Responsibilities: Perform functional and parametric testing of digital circuit boards and systems Troubleshoot digital components and assemblies using schematics, logic analyzers, and oscilloscopes Operate automated test stations and interpret test results Validate firmware and embedded software functionality during testing Document test outcomes and assist in root cause analysis for failures Support engineering teams with prototype and production-level testing May perform adjustments, calibration, alignment, (under supervision) modification of circuitry or components to improve product performance. Require the ability to use basic electronic theory to repair boards or systems. May assist in the construction of test fixtures. Ability to troubleshoot complex digital and RF circuits down to component level Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Skills: Familiarity with digital logic, microcontrollers, FPGAs, and embedded systems Experience with test tools like logic analyzers, oscilloscopes, multimeters, and automated test software Ability to read schematics, engineering change orders (ECOs), and test procedures Strong problem-solving and root-cause analysis abilities. Ability to communicate complex technical concepts to both technical and non-technical audiences. Strong organizational and time-management skills in a fast-paced environment. Collaborative mindset with cross-functional teams. Continuous improvement mindset with attention to detail. Education: Associate's degree (A. A.) in Electronics, Computer Engineering Technology or equivalent from 2 year college or technical school or Experience: Minimum 2 years related experience and/or training - or equivalent combination of education and military experience. Comtech Telecommunications Corp. is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability protected veteran status or other characteristics protected by law.

Transdev in Phoenix, AZ is seeking a Electronic Technician to bolster our team. The Electronic Technician performs all necessary repairs, adjustments, and preventive maintenance procedures to ensure effective operation of all equipment in the areas of revenue collection and processing, two-way radio communication, electronic head signs, and digital video recorders and associated equipment. Transdev is proud to offer: $29.88/hr. - $37.67/hr. (DOE) Position Subject to Collective Bargaining Agreement: Benefits include: * Paid Vacation * Paid Sick Leave: 8 hrs. accrued monthly * Company paid ASE testing, training materials, and tool reimbursement * Medical, Dental & Vision after 90 calendar days of employment for full-time employees, life insurance, and 401k retirement benefits Key Responsibilities: * Diagnoses and performs repair procedures necessary to correct all reported malfunctions of farebox, money processing, radio, and electronic head sign and digital recording equipment. * Analyzes, cleans, and repairs all component parts relative to this equipment. * Performs preventive maintenance procedures to reduce the instances of repair related malfunctions * Completes and submits daily reports related to repair procedures. * Performs road calls, on-the-road repairs, and road tests as needed. * Keeps assigned work area clean and organized. * Maintains DOT card and Class B driver license. * Other related duties as assigned or required. Qualifications: * 3-5 years of experience as an Electronics Technician * Must be able to comprehend parts books and maintenance manuals and accurately complete any necessary reports or other documents. * Mechanic's Tool Set * Must be able to work shifts or flexible work schedules as needed. * Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Physical Requirements: The essential functions of this position require the ability to: * Work outside in varying temperature, weather, and humidity conditions-100% of the job is performed outside, work alone and in remote locations. * Sit for extended periods (up to 6-8 hours per day); frequently walk for long distances and on possible sloped ground or slippery and uneven surfaces * Push and pull objects up to 50 pounds, occasionally throughout the workday; lift material weighing up to 50 lbs. with or without assistance; occasionally bend, kneel, or crouch to files or equipment stored at ground level * Withstand heavy traffic areas while performing the duties of the job; tolerate exposure to considerable amounts of dust, vehicle fumes and noise Drug-free workplace: Transdev maintains a drug-free workplace. Applicants must: * Be eligible to work in the United States without requiring sponsorship now or in the future (if based in the U.S.). * Successfully pass a pre-employment drug screen. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Transdev complies with federal and state disability laws and makes reasonable accommodations for applicants and 29 candidates with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, please ******************************************* About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move everyday thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at ****************** or watch an overview video at******************* O5cv0G4mQ The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. California applicants: PleaseClick Herefor CA Employee Privacy Policy Job Category: Mechanics/Technicians Job Type: Full Time Req ID: 6575 Pay Group: QQN Cost Center: 609 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at http://****************** or watch an overview video.

Why Mayo Clinic Mayo Clinic is top-ranked in more specialties than any other care provider according to U.S. News & World Report. As we work together to put the needs of the patient first, we are also dedicated to our employees, investing in competitive compensation and comprehensive benefit plans - to take care of you and your family, now and in the future. And with continuing education and advancement opportunities at every turn, you can build a long, successful career with Mayo Clinic. Benefits Highlights * Medical: Multiple plan options. * Dental: Delta Dental or reimbursement account for flexible coverage. * Vision: Affordable plan with national network. * Pre-Tax Savings: HSA and FSAs for eligible expenses. * Retirement: Competitive retirement package to secure your future. Responsibilities Maintains medical and clinical equipment through the effective use of the Medical Equipment Management Plan and current asset management software. Consistently demonstrates strong skills and tasks associated with the installation, maintenance, calibration, and repair of complex biomedical equipment and interconnected systems (VLAN, isolated network and Mayo network). Individuals in this position must be highly customer focused with outstanding communication and interpersonal skills. Individuals must have an exceptional technical skillset, comprehensive clinical knowledge and be able to work with minimal supervision on a regular basis. Also must be capable of giving in-service education for clinical and technical staff on critical medical devices and systems, and serve as a professional coach/mentor for clinical and HTM staff on an as needed basis. On-call and overtime is often required as well as travel to other Mayo Clinic sites. A Healthcare Engineering Technician 2 will typically have a degree in biomedical electronics with internship experience, or alternative degrees with more than three years of proven successful service of a diverse spectrum of medical equipment. Qualifications Must have one of the below: * Associate of Applied Science degree from a Biomedical Electronics Program. * Bachelor's degree in a Biomedical Engineering Technology * Bachelor's degree in engineering, electronics, or other related technology fields and 3 years of medical equipment service experience in a healthcare environment * Associate Degree in electronics, electrical engineering, or related technology fields and 3 years of medical equipment service experience in a healthcare environment * US Military Training in Biomedical Electronics. AAMI ACI Certification. Knowledge of mathematics, physics, chemistry, anatomy, physiology, biology, and medical terminology. Familiarity with test tools needed to perform medical equipment maintenance. Understanding of common clinical terminology used in a hospital or clinic. Knowledge of networks, computer hardware, computer software, and computer security. Advanced level of professionalism. Preferred Qualifications: * Nurse call code blue experience * Networking or IT experience Authorization to work and remain in the United States, without necessity for Mayo Clinic sponsorship now, or in the future (for example, be a U.S. Citizen, national, or permanent resident, refugee, or asylee). Also, Mayo Clinic does not participate in the F-1 STEM OPT extension program. Exemption Status Nonexempt Compensation Detail $35.99 - $50.39 / hour Benefits Eligible Yes Schedule Full Time Hours/Pay Period 80 Schedule Details Monday - Friday 8am- 4:30pm Weekend Schedule On call is expected with a 1 week rotation every 6 weeks. International Assignment No Site Description Just as our reputation has spread beyond our Minnesota roots, so have our locations. Today, our employees are located at our three major campuses in Phoenix/Scottsdale, Arizona, Jacksonville, Florida, Rochester, Minnesota, and at Mayo Clinic Health System campuses throughout Midwestern communities, and at our international locations. Each Mayo Clinic location is a special place where our employees thrive in both their work and personal lives. Learn more about what each unique Mayo Clinic campus has to offer, and where your best fit is. Equal Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, protected veteran status or disability status. Learn more about the 'EOE is the Law'. Mayo Clinic participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. Recruiter Tavy Smalls

Work Schedule: Tuesday to Saturday, 1:00 PM to 9:30 PM. A shift differential will be provided. This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: * Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment * Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures * Dismantle machines and equipment to gain access to problem areas * Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures * Inspect and measure parts to detect wear, misalignment, or other problems * Remove and/or replace worn or defective parts * Other duties as assigned. Qualifications: * High School Diploma or GED preferred * 1+ years of commercial or industrial maintenance experience or experience in a related field * Experience with low and high voltage electrical systems * Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs * Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. * Must be able to frequently reach up to 31-77 inches. Physical Demands: * Regularly lift and/or move up to 25 pounds * Frequently lift and/or move up to 50 pounds * Occasionally lift and/or move up to 100 pounds * Regularly stand; walk; stoop, kneel, crouch, climb, or crawl * Ability to reach and handle objects, tools, or controls Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Provide general maintenance, repair and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety.Based in Arizona, Fry's Food Stores merged with The Kroger Company in 1983. Today, we're proudly serving Fry's customers in over 120 stores throughout Arizona. As part of the Kroger family of companies, we take pride in bringing diverse teams with a passion for food and people together with one common purpose: To Feed the Human Spirit. With a history of innovation, we work tirelessly to create amazing experiences for our customers, communities AND each other, with food at the heart of it all. Here, people matter. That's why we strive to provide the ingredients you need to create your own recipe for success at work and in life. We help feed your future by providing the value and care you need to grow. If you're caring, purpose-driven and hungry to learn, your potential is unlimited. Whether you're seeking a part-time position or a new career path, we've got a fresh opportunity for you. Apply today to become part of our Fry's family! What you'll receive from us: The Kroger Family of Companies offers comprehensive benefits to support your Associate Well-Being, including Physical, Emotional, Financial and more. We'll help you thrive, with access to: A wide range of healthcare coverage, including affordable, comprehensive medical, dental, vision and prescription coverage, through company plans or collective bargaining agreement plans. Flexible scheduling in full- and part-time roles with paid time off, including holiday and sick pay based on eligibility and length of service. Emotional and financial support with free counseling through our Employee Assistance Program and free, confidential financial tools and coaching with Goldman Sachs Ayco. Valuable associate discounts on purchases, including food, travel, technology and so much more. Up to $21,000 in tuition reimbursement over your career, through our industry-leading Continuing Education program. Vast potential for growth, through an abundance of industry-leading training programs and diverse career pathways. For more information about benefits and eligibility, please visit our Benefits Page ! Minimum High school diploma or equivalent 3-5 years' proven electrical/mechanical maintenance experience and satisfactory overall performance Ability to use manufacturer interface software Must hold and maintain a valid driver's license Basic knowledge of Microsoft Office Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary Desired Experience reading engineering drawings, manuals and schematics EPA Type 2 Certification Supervisory experience Drive independently to stores on a daily basis as assigned. Perform various preventive maintenance tasks and procedures to building and equipment. Troubleshoot issues and repair equipment. Assist in performing component replacement. Navigate and investigate electronic controls interfaces. Maintain an accurate and organized inventory of parts. Operate equipment, vehicles, powered industrial trucks and aerial lifts safely. Clean and maintain company service vehicles, if one is assigned. Orally communicate with store personnel regarding the proper use of equipment as it relates to repeat calls and overtime. Utilize company email system to send and receive messages. Properly complete all repair, labor, parts purchasing and usage documentation in a timely fashion. Comply with all department and company policies and procedures. Assist other skilled trade technicians in repairs as requested. Audit registered store equipment identification lists. Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store. Must be able to perform the essential functions of this position with or without reasonable accommodation.

As an Engineer in Technical Project Management, you'll lead product change initiatives that shape the future of ASM's technology. You'll drive cross-functional collaboration to ensure seamless transitions from concept to execution, optimizing processes and aligning with global operational needs. This is a strategic role that influences how ASM delivers innovation at scale. Responsibilities: Lead the global product baseline and change process for a designated business unit. Collaborate with cross-functional teams to understand product baselines and change control requirements. Identify components and assemblies to ensure successful implementation of product changes across operations and customer-installed bases. Develop and refine product change management processes to improve efficiency and minimize inventory impact. Provide product support to manufacturing, supply chain, and product management teams. Manage engineering documentation and ensure adherence to standards. Oversee planning functions to ensure effective change implementation dates. Maintain expertise in PLM and ERP systems, BOM platforms, and DMU modeling. Requirements: Bachelor's degree in mechanical or industrial engineering, or equivalent experience. 4+ years of experience in complex product configuration and system engineering. Strong exposure to CMII practices (CMII certification preferred). Knowledge of PLM systems (e.g., Teamcenter) and ERP systems (e.g., SAP S4 Hana). Proficiency in 3D CAD modeling (e.g., CREO). Expertise in ASME Y14.5 GD&T practices (minimum 10 years). Preferred Qualifications Experience with inventory management and CPIM practices. Background in Design for Six Sigma methodologies. Intermediate knowledge of complex mechanical/electrical model systems. Strong analytical skills to decompose complex problems into actionable solutions.

--11 p.m.-7:30 a.m. Senior technician with Avionics background. Minimum 5 years experience with Avionics troubleshooting desired. Able to troubleshoot CCAs (Circuit Card Assembly) to the component level. Able to test units through Test Vectors and HASS/Burn-In Chambers. Able to rework End Items, Sub Assemblies, and CCAs. Experience with MAU Modules and Displays Units a plus. Flexible work hours a plus. Experience with New Product Development a plus. Able to get along in a team environment. Knowledge of SAP system a plus

Work Schedule: Tuesday to Saturday, 1:00 PM to 9:30 PM. A shift differential will be provided. This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures Dismantle machines and equipment to gain access to problem areas Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures Inspect and measure parts to detect wear, misalignment, or other problems Remove and/or replace worn or defective parts Other duties as assigned. Qualifications: High School Diploma or GED preferred 1+ years of commercial or industrial maintenance experience or experience in a related field Experience with low and high voltage electrical systems Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. Must be able to frequently reach up to 31-77 inches. Physical Demands: Regularly lift and/or move up to 25 pounds Frequently lift and/or move up to 50 pounds Occasionally lift and/or move up to 100 pounds Regularly stand; walk; stoop, kneel, crouch, climb, or crawl Ability to reach and handle objects, tools, or controls Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to “treat associates like family and customers like friends.” Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

The position requires operation of assorted electronic test equipment and a basic understanding of flow meter calibration to enable the person to adjust, scale, and program complex electronic systems to specifications. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. * Calibrate and program microprocessor controlled electronic equipment using personal computers; * Make modifications to existing boards from engineering drawings or diagrams with guidance from an Electronics Technician II or Engineering; * Install and solder components onto circuit boards. * Assemble electronic enclosures and system test electronics mated or paired with flow meters. * Mix and use potting compounds, conformance coatings, etc. as required by drawings and procedures. Nothing in this restricts management's right to assign or reassign duties and responsibilities to this job any time. This job description does not constitute a written or implied contract of employment. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: * A.S. Degree in Electronics or equivalent * One to three years of experience working in a manufacturing environment. * Certification to IPC-J-STD-001 desired PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and/or sit for prolong periods, bend, reach, move from one workstation to another, communicate with others to exchange work-related information, and will be tasked with operating equipment, machinery, power tools, and/or heavy equipment after training. He/She will perform work involving repetitive motion that may include the wrists, hands and/or fingers. The employee may be required to lift light items up to 20 lbs. regularly, medium items of 21-40 lbs. often. The employee is expected to utilize the proper and required safety precautions, including sound judgement when tasked to move or lift heavy objects. The employee may be required to perform work tasks under magnification using a microscope as well as tasks involving very small parts and components. Specific vision abilities required by this job include near distance vision, color vision, depth perception, and the ability to adjust focus.

At Caris, we understand that cancer is an ugly word-a word no one wants to hear, but one that connects us all. That's why we're not just transforming cancer care-we're changing lives. We introduced precision medicine to the world and built an industry around the idea that every patient deserves answers as unique as their DNA. Backed by cutting-edge molecular science and AI, we ask ourselves every day: “What would I do if this patient were my mom?” That question drives everything we do. But our mission doesn't stop with cancer. We're pushing the frontiers of medicine and leading a revolution in healthcare-driven by innovation, compassion, and purpose. Join us in our mission to improve the human condition across multiple diseases. If you're passionate about meaningful work and want to be part of something bigger than yourself, Caris is where your impact begins. Position Summary The Clinical Engineering Technician is responsible for the organization, installation, and maintenance of the equipment within the clinical molecular lab. Job Responsibilities Drafts preventative maintenance procedures and makes corrections/changes to existing procedures. Attends training sessions on instrumentation to learn function, basic programming, maintenance and troubleshooting. Identifies, troubleshoots and recommends repair and spare parts. Is computer literate in basic operating systems and applicable software programs. Maintains and expands professional and personal skills. Expands knowledge of medical technologies. Maintains effective working relationships with other departments and participates in multidisciplinary quality and service improvement teams. Participates in service training of new technicians concerning use and operation of laboratory equipment. Performs and/or coordinates vendor and contractor scheduling for equipment installation, repair, preventative maintenance and trainings Performs initial acceptance inspections on new equipment and completes all required paperwork. Performs modifications and upgrades on devices as directed by the manufacturer or department leader. Performs or coordinates Installation Qualification (IQ), Operational Qualification (OQ), Performance Qualifications (PQ) and Function Verifications (FV) of equipment following installation, repair or preventative maintenance. Compiles, analyzes and submits data for review, according to equipment/procedure specific acceptance criteria, following an IQ, OQ, PQ or FV. Monitors and performs, or coordinates, departmental equipment cross correlations Assists in ensuring department compliance of routine preventative maintenance tasks. Repairs and troubleshoots malfunctioning equipment, when appropriate. Maintains an accurate record of all work performed. Responds to emergency situations in clinical areas and provides support as required and requested. Interacts with staff whenever appropriate. Treats all patient information strictly confidential. Schedules and performs preventative maintenance inspections on instruments and completes all associated paperwork in a timely and accurate manner. Is knowledgeable of applicable safety and electrical limits for health care equipment. Contributes to the achievement of established department goals and objectives and adheres to department policies, procedures, quality standards and safety standards. Support compliance to all applicable regulatory and standard requirements (CLIA, NYS, CAP, ISO, etc.). Accepts and performs other duties as assigned. Required Qualifications Bachelor's degree in science field. 1 year of experience in repair and/or troubleshooting of laboratory equipment. Knowledge of laboratory safety and quality control procedures and regulations. Demonstrate clear ability to articulate previous experience. Proficient in Microsoft Office Suite and Internet for business use. Physical Demands Must possess ability to sit, stand, and/or work at a computer for long periods of time. May have exposure to blood-borne pathogens, extreme temperatures, high noise levels, fumes and bio-hazardous material/chemicals including formalin in the lab environment. Visual acuity and analytical skill to distinguish fine detail. Ability to pass a visual color discrimination test. Required Training All job specific, safety, and compliance training are assigned based on the job functions associated with this position Other 1st Shift Schedule: 5:30am-4:00pm Wednesday to Saturday. This position may require periodic travel and some evenings, weekends and/or Holidays. Conditions of Employment: Individual must successfully complete pre-employment process, which includes criminal background check, drug screening, credit check ( applicable for certain positions) and reference verification. This reflects management's assignment of essential functions. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Caris Life Sciences is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

An HTM Technician maintains medical, clinical equipment and systems through effective implementation of the Mayo Clinic Medical Equipment Management Plan. Technician must demonstrate technical and mechanical skills and tasks associated with the planning, installation, maintenance, calibration, and repair of biomedical, laboratory, research, and interconnected patient care systems. Technicians in this position must be highly customer focused with outstanding communication and interpersonal skills. They must have the ability to prioritize service calls appropriately, and to adhere to Mayo policy and procedure. Service calls are communicated to the technician through HTM Leadership, HTM Support Specialists, or CMMS dashboard. Emergent calls directly from the customer may require a rapid response time. On-call and overtime may be required, as well as travel to other Mayo Clinic sites. The technician must be committed to continuously improving their knowledge to develop a mastery of increasingly complex equipment and supporting Mayo's mission. In addition, an HTM Level III Technician will often work with high complexity equipment such as anesthesia machines, perfusion equipment, ventilators, mass spectrometry, chemistry/hematology analyzers or Total Automation systems. Bachelor's degree in Biomedical Electronics/Healthcare Technology Management, Electronics, Mechatronics, or Engineering (mechanical/computer/electronics) and 3 years of related experience; or an Associate's degree in Biomedical Electronics/Healthcare Technology Management, Electronics, Mechatronics, Engineering (mechanical/computer/electronics), or technical discipline and 5 years of related experience; or U.S. Military training in biomedical electronics, mechatronics, or engineering (mechanical/computer/electronics) and 5 years of related experience. Related experience includes role-relevant equipment repair with a demonstrated increase in responsibility and exposure to highest complexity equipment. Laboratory or Research positions: Associate's degree or higher in medical/clinical laboratory science, medical technology, or other related science fields and a minimum of 5 years supporting laboratory equipment with a minimum of 5 years in a service or field service type role. Preferred Qualifications and Experience include: AAMI ACI Certification: AAMI-CBAT, CBET, CRES, CHTM, CISS, CCEACCE-HTCC, CCE Vendor training on relevant equipment Knowledge of safe work practices around biological, chemical, radiation and energy hazards. Familiarity with test and QA tools/software needed to perform medical equipment maintenance Knowledge of mathematics, physics, chemistry, anatomy, physiology, biology, and medical terminology. This vacancy is not eligible for sponsorship/ we will not sponsor or transfer visas for this position. Also, Mayo Clinic DOES NOT participate in the F-1 STEM OPT extension program.

We are seeking a skilled Radio Frequency Technician to join our team. The ideal candidate will have experience in the design, installation, and maintenance of radio frequency systems. The successful candidate will be responsible for: Designing and implementing radio frequency systems Installing and configuring radio frequency equipment Performing routine maintenance and repairs on radio frequency systems Diagnosing and troubleshooting issues with radio frequency systems Collaborating with other technicians and engineers to ensure optimal system performance Requirements: Associate's degree in Electrical Engineering or related field 2+ years of experience in radio frequency system design, installation, and maintenance Strong knowledge of radio frequency principles and technologies Experience with radio frequency testing and measurement equipment Excellent problem-solving and troubleshooting skills Ability to work independently and as part of a team Strong communication and interpersonal skills Ability to work in a fast-paced environment and manage multiple projects simultaneously If you meet the above requirements and are interested in this exciting opportunity, please submit your resume and cover letter for consideration.

Report To: Sr. Manager, IT & Security This position is responsible for the successful planning, development and implementation of multiple enterprise scale information technology (IT) systems across the organization in order to achieve maximum productivity and efficiency. Responsibilities: IT Planning Management - IT Investment & Operational Budget Management - IT Investment Plan Establishment/Execution/Progress Management - IT Investment Plan Submit/Review Management - IT Contract/Agreement/Payment Management IT Infra Operation - Ensure stable operation and improvement of servers, software (SW), networks (N/W), databases (DB) - Proactively identify and swiftly resolve system failures and implement countermeasures Communication Channel Control with Parent headquarters - IT Issue Management - Weekly/Monthly Report (Issue/Achievement/Progress) - IT Committee Coordination IT Asset Management - Hardware, Software Asset Registration / Disposal Control - Regular Asset Inventory/In-use Count Common IT Related Work - Office & Factory IT Accessory Purchasing Support - Others as directed Qualifications: 3+ Years of relevant work experience within manufacturing and/or construction industries Bachelor Degree in Information Technology or relevant Engineering field Bilingual skills, writing and speaking, in English and Korean required Technical Project Management experience Data Analysis Projects & Production System Projects Experience preferred MES and SAP ERP System Setup Projects Experience preferred Skills: Excellent communication skills Ability to work flexible hours as needed to support entire production team Ability to work flexible hours as needed to support and work with HQ and global sites MS Office tool-based report writing and oral communication skills Benefits: Medical/Dental/Vision/Life/Disability Insurances FSA, HSA 401K Paid Leave Benefits: Time Off, Sick Leave, Holiday, Parental, Bereavement Employee Assistance Programs Student Loan Assistance Child Care Tuition Reimbursement Relocation Support Why should you work here? 1. Growth - You are a self-driven individual who seeks and captures the opportunities for growth we offer by acquiring and solving tasks. 2. Challenge - You reach beyond expectations and strive for innovative methods beyond the traditional. 3. Action - You are driven, take initiative, can execute decisions with agility and fulfill tasks to completion. 4. Collaboration - You are enthusiastic about teamwork while respecting the different backgrounds and experience of colleagues.

This position requires full-time presence at your assigned office(s)/worksite(s). Responsibilities: Install, repair, calibrate and maintain semiconductor process equipment while minimizing equipment down time. Escalate advanced repairs as needed, to senior level technicians. Monitor, inspect and maintain semiconductor equipment in order to prevent and minimize malfunctions. Maintain accurate documentation of maintenance activity and provide periodic reports Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work Provide training and assistance to technicians and may provide basic instruction to customers. Participate in ongoing technical training to expand technical expertise. Qualifications: Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 Associate degree or equivalent experience required, bachelors degree preferred plus 0-2 years of experience. Prefer 1 - 2 years of related (electromechanical) work experience (i.e. field service engineer or technician position in a semiconductor equipment company or a technical position in the engineering field). Litho experience preferred, experience on high precision equipment helpful. May require up to 70% travel for training in the first 6 months, after which travel may be up to 40% (valid drivers license and acceptable driving record necessary). Requires MS Word, Excel, and Powerpoint. Position may require travel to other offices/customer sites within the US. Some overseas travel as needed. Requires ability to work flexible shifts, compressed work weeks. This position requires driving for company business as an essential function of the job and must remain in compliance with company safety guidelines and policies. Requires ability to lift up to 30 pounds individually and for lifting over 30 pounds assistance may be available. Substantial amount of standing, walking, typing, grasping, talking and hearing. Substantial amount of driving required, sometime for multiple hours at a time. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems.

For years, has been a trusted partner in providing world-class data center solutions. With a focus on sustainable, secure, and reliable infrastructure, Stream empowers businesses to scale their digital operations while prioritizing environmental and social responsibility. Stream Data Centers continues to set new standards for innovation, operational excellence, and sustainability in the data center industry, having provided premium data center services since 1999. Now, with 90% of its inventory leased to Fortune 100 customers, the company has acquired, developed and managed more than 27 data center projects nationally, while leadership has remained consistent for over two decades. From site selection to data center construction and operations, Stream develops wholesale colocation capacity and build-to-suit facilities for hyperscale and enterprise users in major markets across the United States. Additionally, Stream sources and develops low-risk land sites for optimum data center development and provides energy procurement services with a focus on reducing market risk and providing low-cost renewable energy options. POSITION OVERVIEW The Critical Engineering Technician will be a part of the Operations team reporting to the Critical Facilities Manager and will perform maintenance on critical facility equipment. The Critical Engineering Technician plays a critical role in supporting the day-to-day operations of our hyperscale, multi-building data center campus. This hands-on position is responsible for ensuring the uptime, reliability, and performance of critical facility systems. Critical Engineering Technicians perform routine inspections, preventive maintenance, and rapid response to alarms or incidents involving power, cooling, and networking equipment. The Critical Engineering Technician works across multiple areas, including critical equipment support spaces, that demand precision and strict adherence to operational protocols. This position coordinates with internal teams such as operations, engineering, and security, as well as external vendors and contractors. Critical Engineering Technicians are detail-oriented, adaptable, and capable of working in a fast-paced, 24/7 mission-critical environments. The role offers opportunities for growth and advancement within the data center industry and is foundational to the reliability and scalability of hyperscale infrastructure. 12-HOUR NIGHT SHIFT (7PM-7AM) RESPONSIBILITIES Perform all standard and non-standard activities in accordance with Stream Data Centers' operating procedures or maintenance work instructions. Perform rounds inspecting mechanical, electrical, and fire/life safety systems (MEP/FLS) throughout the building and equipment yards. Monitor Building Management System (BMS) and Data Center Infrastructure Management (DCIM) dashboards for alarms and anomalies. Perform BMS operations and effectively analyze data to ensure proper functions of all critical systems. Execute preventative and corrective maintenance tasks on critical infrastructure including UPS, FCUs, CRAH/CRACs, chillers, generators, and electrical switchgear. Work cross-functionally with operations, engineering, network, and project teams to coordinate site-wide activities. Utilize Computerized Maintenance Management System (CMMS) for all equipment related activity support site management to resolve site issues based on priorities. Participate in technical training and certification programs to maintain up-to-date knowledge of equipment and best practices. Participate in team meetings, shift handovers, and post-mortem reviews to share knowledge and support cross-functional collaboration. Escort vendors and contractors during maintenance or installation activities, ensuring badge compliance and activity logging. Comply with Stream Data Centers departmental policies, including all EHS policies and procedures. MINIMUM QUALIFICATIONS 2+ years' experience in an industry that includes operations & maintenance Familiarity with Standard Operating Procedures (SOPs), Method of Procedures (MOPs), and their application to work orders Experience working in a highly collaborative, cross-functional environment Working knowledge of mechanical, controls, and fire and life safety systems Proficient with computer systems including documents, spreadsheets, and email PREFERRED QUALIFICATIONS 5+ years' experience in a critical operations environment, preferably in the data center industry Experience scheduling and planning maintenance for large-scale, complex systems in an operations environment PHYSICAL REQUIREMENTS/CONSIDERATIONS Perform physical tasks, including moving heavy equipment ( up to 50 pounds), operating critical infrastructure, crawling in tight spaces. Work in a noisy environment with ear protection and eye protection; potential to work at heights and from ladders Perform extended site rounds that could include long distances of walking and long periods of time being away from a desk. Use hands to manipulate small wires and objects. The pay range for this role is between $35/hour - $45/hour. Individual compensation packages are based on various factors unique to each candidate, including skill set, experience, qualifications, location, and other job-related reasons. Stream Data Centers offers annual bonus, benefits, 401k and a variety of other perks and benefits. ______________________________________________________________________________ Stream is an equal-opportunity employer and does not discriminate on the basis of ethnicity, race, religion, sex, age, national origin, disability, military status, or any other reason prohibited by law. Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. If you need any assistance or an accommodation throughout the interview process due to a disability , you may contact us at accommodations@stream-dc.com.

Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries. With 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ employees, and over 1.2 million square feet of production/distribution facilities, PAG offers comprehensive MRO services on over 200,000 product lines. PAG supports operators in the Airline, Business and General Aviation (BGA), Military and Rotary Wing markets through its Inventory Supported Maintenance, Repair, and Overhaul (ISMRO ) business model. JOB PURPOSE The Engine Technician will effectively provide maintenance, repair and overhaul services to PT6A engine series. This includes, but is not limited to, disassemble, clean, evaluate, repair and assemble turbine engines. Experience is a plus but not a requirement. JOB DUTIES AND RESPONSIBILITIES Essential function includes: Maintain, repair and overhaul service to PT6A & PT6T engines Read and interpret maintenance and overhaul manuals. Replace or repair worn, defective or damaged components Disassembly, clean, evaluate, repair and assemble turbine engines Ideal candidates offer: 3 years' experience in aviation maintenance environment, preferably on PT6A/PT6T series A&P License preferred but not required Pratt Whitney turbine engine experience a plus Computer skills including electronic mail, Microsoft word and Excel Ability to read and comprehend written and oral instructions in English A valid clear driver's license Must have own hand tools. Special tooling will be supplied by company Department of Homeland Security proof of employment eligibility verification Physical requirements: work in confined workspace, manual dexterity to work with and on small tools and component parts, routinely bend and must be able to lift up to 40 pounds. We offer competitive pay and a wide variety of benefits. Full time associates qualify for health benefits the first of the month following 30 days' employment. Options include 4 medical plans, 2 dental plans, vision, base life (company paid), voluntary life, short and long-term disability, flex spending accounts, and telemedicine. Other benefits include vacation and PTO time accrued with each pay cycle with a vacation carryover/payout option at year end, 9 paid holidays, 401k with company match contributions. Qualified candidates with strong drive, work ethic and commitment to quality are invited to apply at www.precisionaviationgroup.com. EOE/Vets/Disabled

We awaken the world with energy. LG Energy Solution is the global leader in lithium-ion battery technology for electric vehicles and energy storage solutions. Located in Queen Creek, Arizona, LG Energy Solution Arizona, Inc. is LG Group's first cylindrical battery manufacturer in North America, leading the widespread distribution of electric vehicles with the most advanced battery technology in the world. Join us as we inspire our talent with growth, challenge, action and collaboration to Empower Every Possibility! Job Summary: The Defect Control Engineer II, Process Technology, identifies battery cell defects caused by contamination and prevents recurrence through equipment and procedural improvements. The individual in this role will drive a focus on quality and continuous improvement in our li-ion battery electrode manufacturing clean room. Responsibilities: Implement improvements that reduce foreign particles using a structured problem-solving approach, such as lean Six Sigma, including: Utilize analytical tools such as SEM (Scanning Electron Microscope), XRF (X-ray Fluorescence) and EDX (Energy Dispersive X-ray Spectroscopy) for material identification and contamination characterization. Analyze foreign particles collected from manufacturing processes to identify sources and contamination risks. Standardizing improvements and communicating them with others (written and verbally) Update and maintain Control Plans and PFMEAs (Process Failure Mode and Effects Analysis) in collaboration with process and quality teams. (e.g. Production, Quality, etc.) and resolve internal and external quality issues Conduct internal and customer audits, including preparation and follow-up on action items. Apply VDA 19.1 standards, including particle trap measurements, to ensure cleanliness in electrode production. Monitor and control temperature, humidity, and suspended particles in cleanroom and manufacturing areas to maintain optimal production environments. Perform other duties as assigned Qualifications: Bachelor's degree in engineering or related field required, or equivalent, relevant experience Experience 3+ years of work experience in a technological or manufacturing field with preference for experience with electrode technology Manufacturing experience (Electrode process or production) Skills: Knowledge of cleanroom standards (e.g., ISO 14644). Knowledge of PFMEA, Control Plans, and VDA 19.1 standards. Familiarity with foreign material analysis procedures and contamination control protocols. Experience in factory environmental monitoring systems. Experience with XRF, SEM/EDX tools for material and particle analysis. Why should you work here? 1. Growth - You are a self-driven individual who seeks and captures the opportunities for growth we offer by acquiring and solving tasks. 2. Challenge - You reach beyond expectations and strive for innovative methods beyond the traditional. 3. Action - You are driven, take initiative, can execute decisions with agility and fulfill tasks to completion. 4. Collaboration - You are enthusiastic about teamwork while respecting the different backgrounds and experience of colleagues. EEO Statement LG Energy Solution Arizona, Inc. is an Equal Employment Opportunity Employer.