Electronics technician jobs in Rapid City, SD

KEY RESPONSIBILITIES Identify and perform correct robotic welding parameters, welding procedures, operations, and programs Responsible for the advanced setup, program adjustments, operation, and maintenance of the machine Create robotic weld programs, modify existing programs, and conduct welding cell cycle time calculations according to the standard work instructions. Troubleshoot and perform preventative maintenance of robotic and weld equipment Complete documentation in a timely manner Train and mentor new employees Understand plant safety guidelines and pass all required safety training Maintains good housekeeping and clean work areas in assigned space Act, Live, and Behave by TCF Core Values. Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS Typically requires a high school diploma and up to 4 years of experience Read and understand shop orders and blueprint, safety rules, standard work instructions written in English. Basic math skills to include addition, subtraction, multiplication, and division in all units of measure including whole numbers, fractions, and decimals. Ability to read a tape measure. Ability to use hand tools in a safe and proper manner. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds; and occasionally lift/move up to 50 pounds. Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.

Are you looking for an exciting career with a stable company? Wood is currently recruiting for an I&E Technician to join our team working near Upton, Wyoming. This position would be responsible for troubleshooting and repairing Control and Electrical systems as well as communications networks. Authorization to work lawfully in the US without sponsorship from Wood is required Responsibilities Troubleshoot and repair all plant instrumentation. Troubleshoot and repair Control and Electrical systems. (PLCs, transmitters, control wiring, MCCs, Soft Starters, VFD's etc..). Troubleshoot and repair control/communication networks within plant (Ethernet I/P, Network Switches, Fiber Optics, Ethernet and Serial Radio networks) Work Safely around instrumentation and electrical systems. Qualifications Understanding of basic plant operations Journeyman Electrician certification required Must have a valid drivers license PLC and DCS experience is a plus. Knowledge of control valves, positioners and control loops Knowledge of Ethernet Radio and Serial Radio networks. Solid understanding of low and medium voltage electrical equipment such as switch gears, Variable Frequency Drives, lighting contractors, and 24 volt DCE control circuits Computer Skills: Microsoft Word and Excel Willing to work overtime when necessary (not guaranteed). Must be able to pass a pre-employment drug screen and background check

DC Power Telecom Technician Level IV As a Level 4 Lead Installer, you will be responsible for overseeing and executing complex telecommunications installations in Central Office, Data Center, Substation, and Outside Plant environments. You will lead a team of technicians, ensuring projects are completed on time, within budget, and to the highest quality standards. PLEASE NOTE: Position requires a high degree of travel. We currently have a need for a technician serving the Iowa/Midwest region. Responsibilities: Install, test, and turn up equipment in the Central Office, Data Center, Substation, and Outside Plant Environments Add and/or removal of battery strings Perform additions, removals, and modifications on working equipment and circuits Add and/or remove circuits on working power distribution equipment Installation of auxiliary framing and relay racks On site analysis of job drawings and specifications to resolve any issues prior to job start Preparation of SMOPs and DMOPs for the project Function as the point of contact for support groups such as engineering, material assignment, etc. Review the work assignments and project steps (reference the SMOP/DMOP) before each work shift so that all personnel, including contractors, are aware of their roles and responsibilities during the scheduled work tour Completing the job log as per company standards, including the personnel and hours worked by each work items completed or in progress and notable site or project issues Complete DC audits, preventive maintenance, and/or load testing of DC power systems and standby batteries. Additional Responsibilities: Add and/or upgrade software as needed Oversee the work assignment, time management, and training and development of all personnel assigned to the job Maintain a professional orientation, ensuring quality and outstanding customer service Qualifications: Minimum of 6 years of experience in telecommunications installation. Strong technical knowledge of network equipment and protocols. Excellent troubleshooting and problem-solving skills. Leadership and supervisory skills. Strong communication and interpersonal skills. Ability to work independently and as part of a team. Valid driver's license. OSHA 10 certification (preferred). This role requires a highly skilled and motivated individual with a strong technical background and leadership abilities. Compensation and Benefits: This position offers competitive pay and an attractive benefits package including medical, dental, vision, life, disability insurance, 401(k), and more. About Vantage Point Solutions Vantage Point Solutions was founded in 2002 by a team who believed in putting people - both employees and clients - first. VPS is a customer-focused, technology-driven engineering and consulting firm serving the broadband, power, and financial industries. The entire team is driven by a commitment to client satisfaction. We work hard to foster a culture of teamwork, respect, and commitment (with a good mix of camaraderie and fun, too). EEO Vantage Point Solutions is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sexual orientation, gender identity, national origin, veteran or disability status.”

Job DescriptionSalary: Electronics Technician II Reports to Shop Supervisor Has 1 to 3 years of experience in the Oil and Gas Industry. Will be required to do monthly PM services, software updates and training of lower level techs. Requirements Possess an advanced hand tool set. To follow all safety processes and procedures. Siemens, Rockwell, Opto22 plc training Knowledge of industrial engine/transmission diagnostic software. Safeland training Install/repair/calibrate 4-20ma instruments for plc control Proficient with computers Duties & Responsibilities MUST FOLLOW ALL SAFETY REGULATIONS AND STANDARDS Basic understanding of the use of diagnostic software and how to use it. Proficient knowledge of hydraulic systems and their correct control settings. Can perform electro/hydraulic system troubleshooting. Proficient knowledge of electrical systems and troubleshooting. Has a good understanding on basic equipment operation and theory. Basic understanding of troubleshooting and repair of greaser systems. Is proficient in performing all monthly PM services with no guidance. Must have a good understanding of electro-hydraulics pump systems

Job Description Automatic Building Controls, Inc., the 2020 Siemens Fire Safety Solutions Partner of the Year for the USA, is a leading commercial fire alarm provider located in Sioux Falls, South Dakota. We specialize in Life Safety Systems such as Fire Alarms, Mass Notification, Emergency Radio Communication Enhancement Systems, and Nurse Call. We also specialize in other low voltage systems such as Clock Systems. We have an excellent opportunity for a technology-oriented individual with a desire to apply electronic knowledge and skills as an Electronics Technician. No experience is necessary as we provide on-the-job company training, but we are only looking for career-minded individuals! This hourly-paid position is well-suited for a motivated individual that possesses leadership qualities, technical abilities, customer service and communication skills, and a strong work ethic. Automatic Building Controls, Inc. is a family-owned, small business that was started in 1986. Be more than just a number and become a part of a close-knit team. Know that when your workday ends, the systems that you have worked on protect an untold number of lives. Responsibilities: • Service, install, inspect, and troubleshoot life safety systems such as fire alarm and other low voltage systems • Perform customer training • Provide excellent customer service • Perform work in an efficient, positive and organized manner • Maintain accurate, detailed documentation • Keep a safe and clean work environment Benefits: • Health Insurance • 401(k) retirement plan with 4% match • PTO and sick time • Company vehicles/tools and PPE • Road Money cash advancement with per diem reimbursement • Paid factory training • Paid NICET/industry certification • Flexible time off for appointments, events, etc. • Mobile phone usage reimbursement Requirements: • High school diploma or GED required • Associate's degree in Electronics or 2+ years electronics/electrical experience a plus • Strong interpersonal and customer service skills • Excellent verbal and written communication skills • Self-motivator with little direct supervision required • Detail-oriented • Ability to complete tasks • Must have valid driver's license and good motor vehicle record • Variable overnight travel • Experience with fire alarm, nurse call, door access, clocks, or other low voltage systems a plus #hc16265

Job DescriptionJoin Our Team as a Pool and Spa Field Service Technician Are you looking for a hands-on job where no two days are the same? Do you have a passion for working outdoors and helping customers enjoy their pool and spa experience? If so, Splash City in Sioux Falls, SD is looking for a dedicated Field Service Technician to join our team. Responsibilities: Provide exceptional service to customers, including diagnosing and repairing pool and spa equipment Perform routine maintenance on pools and spas to ensure optimal performance Install and set up new pool and spa equipment Educate customers on proper pool and spa maintenance Track and manage inventory of parts and supplies Qualifications: Prior experience in pool and spa maintenance and repair or a related field Strong problem-solving skills and attention to detail Excellent customer service and communication abilities Ability to work independently and manage time effectively Valid driver's license and reliable transportation Why Join Our Team? As a Field Service Technician at Splash City, you will have the opportunity to work with a supportive team of professionals who are dedicated to providing top-notch service to our customers. You will gain hands-on experience in the pool and spa industry and have the chance to grow and expand your skills. At Splash City, we believe in promoting a positive work environment where employees feel valued and appreciated. We offer competitive pay and benefits, as well as ongoing training and support to help you succeed in your role as a Field Service Technician. About Us: Splash City is a family-owned and operated business that has been serving the Sioux Falls community for over 40 years. We are dedicated to providing high-quality pool and spa products, as well as exceptional customer service to ensure our customers have a great experience. Our team of professionals is committed to delivering top-notch service and expertise to help our customers create their own backyard oasis. Join us at Splash City and become part of a team that is passionate about pool and spa maintenance and delivering outstanding service to our customers. Apply today! #hc205515

BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under supervision, the Electrical Technician must be capable of performing all tasks in Astec manufacturing electrical department. Must be able to assemble, evaluate, troubleshoot and correct deficiencies to make certain product specifications are met. Ensure that work is in accordance with relevant codes. This level of electrician will deal with live energized equipment and be trained and capable of performing all required tests and if necessary de-energize equipment to meet safe standards before proceeding. Key Deliverables * Assemble, evaluate, test, and maintain electrical or electronic wiring, equipment, appliances, and apparatus. * Troubleshoot and repair malfunctioning equipment. * Construct and fabricate parts, using hand tools and specifications. * Read and interpret electrical and electrical circuit blueprints and diagrams. * Perform preventative maintenance on a regular schedule. Key Activities & Responsibilities * Demonstrate Astec processes in all aspects of the manufacturing electrical department including panel room, construction manufacturing and industrial manufacturing as warranted by workload demands and scheduling needs. * Test and troubleshoot heaters to ensure equipment is ready before shipping to customer site * Correct and re-test to verify corrective action was successful * Communicate with electrical engineering recommendations to correct or improve processes * Monitor quality issues that warrant concern and encourage postponement of equipment from being shipped. Achieve quality results as it relates to the Company's vision and mission * Promote and educate others on Astec's core values * Follow company policies, procedures, and safety rules at all times To be successful in this role, your experience and competencies are: * High School Diploma or equivalent and/or accreditation from a technical school or an applicable skilled trades program required. * 0-2 years working in manufacturing in order to understand equipment and process procedures * Must be detail oriented, good workmanship while taking and following direction with little to no supervision. * Demonstrated track record of working cross-functionally and as a team necessary. * Strong problem-solving skills desired. * Recognition that at every level growing experience in troubleshooting is essential to evaluate and correct concerns before testing. Supervisor and leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. * Continuous devotion to meeting the needs of our customers * Honesty and integrity in all aspects of business * Respect for all individuals * Preserving entrepreneurial spirit and innovation * Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry,

Job Description If you are interested in a meaningful and challenging career, consider employment with Electro-Test & Maintenance, Inc / EPC Services Co as power systems test technician specializing in medium and high voltage substation and generation facility equipment. ETMI has been providing testing and maintenance services since 1980 for all types of electrical power equipment utilizing state of the art test equipment. Besides shop repair services we provide field services to the area, therefore there will be travel and a Class A CDL w/ air brakes is a requirement for employment. Previous substation experience is beneficial but not required. You need to have an interest in electricity and mechanics. A person with “electro-mechanical” abilities will excel with hands-on job training by our experience dedicated staff. Typical annual starting salary range is $72,500 and higher depending on qualifications and experience. Benefits offered include: 401(k) ESOP and Profit Sharing Paid Vacation Paid Holidays Health Insurance Out-of-town work incentives For more information about ETMI, please visit us online at: **************** Call for questions or more information: ************ #hc70837

Join Our Campus Community! Thank you for your interest in joining the University of Wyoming. Our community thrives on the contributions of talented and driven individuals who share in our mission, vision, and values. If your expertise and experience align with the goals of our institution, we would be thrilled to hear from you. We encourage you to apply and become a valued member of our vibrant campus community today! Why Choose Us? At the University of Wyoming, we value our employees and invest in their success. Our comprehensive benefits package is designed to support your health, financial security, and work-life balance. Benefits include: Generous Retirement Contributions: The State contributes 14.94% of your gross salary, and you contribute 3.68%, totaling 18.62% toward your retirement plan. Exceptional Health & Prescription Coverage: Enjoy access to medical, dental, and vision insurance with competitive employer contributions, that include 4 deductible options to suit your needs. Paid Time Off: Benefit from ample vacation, sick leave, paid holidays, and paid winter closure. Tuition Waiver: Employees and eligible dependents can take advantage of tuition waivers, supporting continuous education and professional growth. Wellness and Employee Assistance Programs: Stay healthy with wellness initiatives, counseling services, and mental health resources. At the University of Wyoming, we are committed to creating a supportive and enriching workplace. To learn more about what we offer, please refer to UW's Benefits Summary. JOB TITLE: Electronic Access Technician JOB PURPOSE: Under limited supervision, perform install, service and repair of electronic and mechanical access control systems on campus. Maintain the highest level of security, access and safety on campus in accordance with building codes and standard security procedures. This position has been deemed essential as addressed in the University of Wyoming's Employee Handbook. Employees in essential positions may be required to work during emergency closures and winter closure based on the nature of their job duties and the reasons for the closure. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform installation, integration, programming, and repair of electronic access controls, including proximity card and swipe card hardware, and electronic door hardware and wiring. Assist with project management and oversight of access controls installations by contractors on Facilities Engineering and Capital Construction projects. Assist Locksmith with installation and maintenance of mechanical access control systems. Install, maintain and repair the following systems associated with campus building access and security: intrusion, egress and theft alarm systems; ADA operators; panic alarms Identify and resolve safety issues such as, but not limited to, accessibility, electrical hazards, asbestos releases, confined spaces and ladder/scaffold safety. Identify and resolve conflicts and concerns with applicable codes and standards. Promote and support an environment of safety at all times. Act as after hours on-call electronic access control contact. SUPPLEMENTAL FUNCTIONS: Other duties as assigned. COMPETENCIES: Analysis/Problem Identification Independence Integrity Technical/Professional Knowledge Service Orientation Quality Orientation Work Prioritization & Management MINIMUM QUALIFICATIONS: Education: High School Diploma or GED, plus completion of related technical or vocational education/training Experience: 4 years work-related experience Required licensure, certification, registration, or other requirements: Wyoming Dept of Fire Prevention and Electrical Safety Low Voltage LV-X License or better Valid driver's license with a motor vehicle record (MVR) compliant with the Driving for University Business SAP. DESIRED QUALIFICATIONS: Experience with S2 door access controls. REQUIRED APPLICATION MATERIALS: Complete the online application. The department additionally requests candidates upload the following document(s) for a complete application: Cover letter Resume or C.V. Contact information for four work-related references (references will only be contacted if you are selected as a finalist for the position). This position will remain open until filled. Complete applications received by 11/30/2025 will receive full consideration. **Due to a current system limitation, you may only be prompted to upload your resume/CV and a Cover Letter. To ensure your application is complete, we recommend you put all of your application materials into one file with your cover letter. However, if you're experiencing any issues in doing so, please send any additional application materials to ****************, and a recruiter will manually add them to your application packet. To help us process your application more efficiently, please include the 6-digit job ID number (located at the bottom of the job posting) in your email. WORK LOCATION: On-campus: This position provides vital support to campus customers, and the successful candidate must be available to work on campus. WORK AUTHORIZATION REQUIREMENTS: The successful candidate must be eligible to work in the United States. Sponsorship for H-1B work authorization or work visa is not available for this position. HIRING STATEMENT/EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation to apply for a position, please contact us at ************ or email ****************. ABOUT LARAMIE: The University of Wyoming is located in Laramie, a charming town of 30,000 residents nestled in the heart of the Rocky Mountain West. The state of Wyoming continues to invest in its only 4-year university, helping to make it a leader in academics, research, and outreach with state-of-the-art facilities and strong community ties. We invite you to learn more about Laramie by visiting the About Laramie website. Located in a high mountain valley near the Colorado border, Laramie offers both outstanding recreational opportunities and close proximity to Colorado's Front Range and the metropolitan Denver area. Laramie's beautiful mountain landscape offers outdoor enjoyment in all seasons, with over 300 days of sunshine annually. For more information about the region, please visit ************************

←Back to all jobs at Upstream Data Inc Electrical Technician About Us: Upstream Data US Inc. is the newest expansion of Upstream Data, a Canadian-founded company recognized for innovation in the energy sector. Building on years of expertise in manufacturing, we have expanded into the United States to meet growing demand and to better serve our customers. The launch of Upstream Data US Inc. marks an exciting new chapter in our growth. While we bring with us the proven processes, craftsmanship, and strong culture built in Canada, we are also building a dynamic local team to shape the future of our U.S. operations. This is an opportunity to join a company with a solid foundation and a start-up spirit where your ideas and contributions will directly impact our success. Position Summary: The Electrical Technician supports the day-to-day operations of the electrical department by assisting electricians and shop staff with the preparation, assembly, and maintenance of electrical components and systems. This position plays a key role in maintaining a clean, organized, and safe work environment while contributing to the efficient production and service of electrical equipment. Responsibilities include, but are not limited to: Wiring Support: Assist electricians with cutting, stripping, pulling, and labeling wire; lay out and prep electrical harnesses and cable assemblies. Panel Assembly: Help install breakers, relays, terminal blocks, and other components into electrical panels under supervision. Parts Prep & Inventory: Organize and prepare electrical parts, hardware, and tools for active jobs; restock bins and assist with inventory counts. Testing & Inspection Prep: Support basic continuity checks and equipment staging under direction; assist with labeling, tagging, and documentation. Material Handling: Move wire spools, enclosures, conduit, and other materials using carts, dollies, or forklifts where trained. Shop Maintenance: Keep the electrical shop clean and organized by sweeping floors, removing waste, cleaning tools, and maintaining workstations. Tool Maintenance: Clean and inspect tools after use; store appropriately and report damaged or missing tools to the electrical lead. Safety & PPE Compliance: Follow all safety protocols including lockout/tagout procedures and use of PPE; report hazards promptly. Other duties as assigned to support electricians, manufacturing teams, and overall shop operations. Working Conditions: Work is performed in an industrial shop environment, with exposure to engine fluids, dust, noise, and high-powered equipment. Some outdoor work or exposure to cold/hot environments may be required. Must wear all required personal protective equipment (PPE), including safety glasses, boots, gloves, and hearing protection as necessary. Qualifications: High school diploma or equivalent. Basic understanding of hand tools and power tools; familiarity with electrical tools is an asset. Able to lift 50+ lbs and perform physically demanding tasks for extended periods. Willingness to learn and follow detailed instructions in a fast-paced environment. Safety-focused with a strong work ethic and attention to detail. Valid driver's license and reliable transportation preferred. Please visit our careers page to see more job opportunities.

The primary responsibility for the Equipment Technician position is collecting, analyzing, and reporting the health of rotating equipment based on multiple technologies including vibration, thermography, oil analysis, pump and motor performance, compressor and engine performance and key operating parameters. This position works closely with operations, engineers, specialists, and maintenance personnel in troubleshooting and repairs. This position will provide support for multiple sites. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: Develop and maintain vibration analysis program. Establish equipment routes and frequency. Collect and enter equipment data necessary for proper vibration analysis. Proficient with rotating and/or reciprocating equipment analysis techniques and perform as required Proficient with motor and/or engine analysis techniques and perform as required Develop and maintain lube oil analysis program establishing routes and frequency Periodic (monthly, quarterly, etc.) data acquisition from equipment, including vibration data with portable systems, critical machinery performance metrics (flow rates, equipment rotating speed, temperatures, and process flow characteristics) and lube oil samples and analysis Perform analysis of data to resolve or proactively anticipate equipment failures Lead and/or assist in root cause failure analysis utilizing the TapRoot process Lead and/or assist with equipment repairs and routine maintenance Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work Implements continuous monitoring systems, such as alarm, report, and acceptance regions Coordinate scheduling of repairs by taking ownership of notifications and corresponding follow-up Monitor equipment repairs in the field and at vendor shops Report equipment deficiencies in SAP system making recommendations for corrective action Collaborate with responsible Maintenance/Reliability Specialist, engineers, planners, Operations Managers and supervisors to ensure proper priorities are placed on deficiencies and continuous learning/improvement process is fostered Support the lubrication program by monitoring its effectiveness or, when required, take samples, interpret analysis and take corrective actions Provide on-call support for areas of responsibility on a rotating basis Comply with partnership safety policies and procedures Perform energy isolation lockout/tagout procedures (LOTO) Required Education: High school diploma or GED Required experience is commensurate with the selected job level: Level C requires a minimum of 0 2 years of relevant experience in an oil and gas operations role or equivalent work experience Level B requires a minimum of 2 4 years of relevant experience in an oil and gas operations role or equivalent work experience Level A requires a minimum of 4+ years of relevant experience in an oil and gas operations role or equivalent work experience Preferred Qualifications: Solid troubleshooting skills and ability to interpret and analyze data Strong computer skills with experience in Microsoft Office suite. Excellent organizational skills Excellent written and verbal communication skills with the ability to work effectively in a group environment Demonstrated self- starter with the ability to work independently and exercise good judgement Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Occasional exposure to heat, cold, and other adverse weather conditions Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays Reliable attendance at work Occasional overnight travel may be required An equal opportunity employer/disability/vet

Inspects, maintains, packs and adjusts aircrew flight equipment such as flight helmets, oxygen masks, parachutes, flotation devices, survival kits, helmet mounted devices, aircrew night vision and other ocular systems, anti-G garments, aircrew eye and respiratory protective equipment, chemical biological protective oxygen masks and overalls, and other types of AFE and aircrew chemical defense systems. Repairs fabric and rubber components, including protective clothing, thermal radiation barriers, flotation equipment, and various parachutes. Evaluates problems and determines feasibility of repair or replacement related to inspecting and repairing fabric, Rubber equipment, and parachutes. Evaluates work orders for fabrication of authorized items. Installs and removes aircraft-installed AFE. Uses various types of test equipment such as altimeters, oxygen testers, leakage testers, radio testers, and other types of testers to conduct reliability testing on AFE and ACDE. Maintains inspection and accountability documentation on AFE issued to air crews or preposition on aircraft. May be proficient in AFE inspection and maintenance procedures; parachute construction; effects on temperature and humidity on parachutes and other fabrics; characteristics of rubberized items; solvent, heat and pressure effects on rubber; proper handling, use and disposal of hazardous waste, materials, and pyrotechnics; aircrew flight and chemical defense equipment inspections, fitting, and maintenance procedures; supply procedures; principles of contamination control. Must also be proficient in related technical information, policies, procedures, techniques, and equipment. Will be required to become proficient in basic helicopter ground handling procedures such as towing, jacking and refuel/defuel and be able to perform these tasks on an as needed basis. MAJOR JOB ACTIVITIES: Responsibilities may include, but are not limited to: Aircrew Flight Equipment inspections - 70% Training Aircrews - 5% Research/Supply/Parts - 5% Ground Support Equipment operations/maintenance - 5% TDY travel - 15% QUALIFICATIONS: AFE Maintenance. Ensure that all aircrew flight equipment employees, prior to starting work, must be a graduate of the Aircrew Flight Equipment (AFSC 1P0X1), the prior Aircrew Life Support (AFSC 1T1X1) and/or Survival Equipment (AFSC 2A7X4) technical training courses (or equivalent), sister-service equivalent courses, or FAA certified equivalent background Certified AFE personnel must have at least 1 year's experience within the last 5 years. Must be able to obtain and maintain a DoD secret security clearance. USAF or military service equivalent in Aircrew Flight Equipment PHYSICAL DEMANDS: While performing the duties of this job, the employee is: Exert up to 50 lbs. of force occasionally, and/or up to 20 lbs. of force frequently, and/or up to 10 lbs. of force constantly to move objects. CLIMBING - Ascending or descending using feet and legs and/or hands and arms. Body agility is emphasized (onto or off of helicopter) HANDLING - Seizing, holding, grasping, turning, or otherwise working with hand or hands. Fingers are involved only to the extent that they are an extension of the hand (required for numerous tasks.) EXPOSURE TO WEATHER - Exposure to hot, cold, wet, humid, or windy conditions caused by the weather (while conducting exterior ramp operations) NOISE - Exposure to constant or intermittent sounds or a pitch or level sufficient to cause marked distraction or possible hearing loss (while conducting exterior ramp operations) WORKING ENVIRONMENT: Candidates may work in and around aircraft with loud noises. SKILLS AND TECHNOLOGY USED: Defense Priorities and Allocation System (DPAS) Microsoft products (Excel, PowerPoint, Outlook, etc.) Benefits Include the Following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

DeGeest is growing and hiring an Industrial Automation Technician! Be a part of our STRONGER STANDARD! We are a leading resource for manufacturers looking for excellence in Steel Works, Automation, and Finishing. Our employees are our greatest asset, and we strive to create fulfilling and meaningful experiences every day. We Collaborate! We Think! We Do! If you want to feel empowered and appreciated, we encourage you to apply! Location: Tea, SD (right off I-29) Work Hours: 7:00am to 4:30pm Monday - Friday (40hrs + 5hrs overtime per week) Education: High School Diploma Pay: $25.00-$35.00/hour Travel: 50% of travel Position Summary: The Automation Integration & Installation position is an intermediate level production and service position that is responsible for integrating, installing, maintaining, servicing, troubleshooting, and repairing automation equipment - particularly equipment that DeGeest Corporation sells to external customers. The role involves working closely with engineers and other team members to ensure the reliable operation and optimal performance of automated machinery and processes. The position's primary focus is preparing and integrating robots and automation systems in-house to then travel and install these units at customer locations. The position also requires the ability to perform service calls, tech questions, and service and preventive maintenance travel to customer locations. Travel is an important factor in this position. Typical travel is 16 weeks per year but could be up to 25 weeks or more if customer demand exists. Responsibilities: Integrate and install robotic finishing systems. Execute mechanical assembly of robotic finishing systems. Perform preventative maintenance and repairs to clients of installed equipment. Support customer service calls and aid in troubleshooting. Understand and follow verbal and written work instructions and/or blueprints, including system build-sheets. Administer communication of project status and maintain records and reports to management team. Education and Experience: High school diploma or equivalent. 0 years of experience Preferred education - Completion of a 2 or more-year post-secondary training program in robotics, mechatronics, or industrial technology. Preferred candidates will have experience in electronics and/or the technical repair and maintenance of industrial equipment. A strong background in electrical work is highly valued for this role, and individuals with experience as electricians are strongly encouraged to apply. Licensing/Registration/Certification: Valid Driver's License, TSA Precheck Eligibility Physical Requirements: Prolonged periods of standing, pushing, pulling, lifting, and carrying materials. Must be able to lift 50 pounds at a time. Required Skills: Strong attention to detail with ability to focus on a given task. Enthusiastic about learning new skills and technology. Effective time-management tactical approach to work prioritization. Commitment to continued development through the DeGeest Strong Standard Program. Read, speak, and write the English language. Good communication skills. Benefits: To better serve our employees, we offer competitive benefits as follows Pay: Hiring Salary Range: $25.00-$35.00/hour Bonus Programs Insurance Medical - Flexible Spending Account and Dependent Care Account Dental and Vision Plans STD/LTD and Voluntary Life/AD&D Plans Investments 401k with a company match Holidays/PTO 9 Paid Holiday, 1 Floating Holiday Paid Time Off Additional Incentives Safety glasses and steel toe boots reimbursement Work shirts provided by DeGeest Note: The final agreed upon compensation is based on individual education, qualifications, experience, and work location. This position is eligible for a bonus. Equal Opportunity Employer: DeGeest is an Equal Opportunity Employer. We consider all qualified applicants for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by law.

Job DescriptionSalary: We have a great, new opportunity for you!! Climate Systems, Inc. is currently seeking aCommercial HVAC Equipment Support Technician. This opportunity will give you the advantage of working for a 100% Employee-Owned Company that has an excellent reputation where your work makes a difference! Our Commercial HVAC Equipment Support Technicianis responsible for project plans and specifications, making equipment selections to meet job/project requirements. This position works closely with the Project Manager. Here's what you'll do: Work within Bluebeam, Microsoft Office Products such as excel and word type files. Work directly with the Project Manager from the start to finish of the job. Download plans and specifications. Make equipment selections to meet specifications and project requirements. And more! Here's what will get you noticed: Knowledge of HVAC is preferred, but not required. Strategic and self-motivated with exceptional organizational skills. Strong work ethic, but team focused. Deadline oriented with ability to multi-task. Ability to read and understand HVAC plans and specifications is preferred, but not required. Strong computer skills in Microsoft Office. Here's what you'll need to be successful: Ability to coordinate with others and maintain composure in high-pressure situations. Self-starter, with strong business understanding, strong self-direction. Excellent communication, time management, and organizational skills. Willingness to learn, ask questions and pursue multiple solutions to a problem. Maintain confidentiality of information. Willing to work flexible hours as needed. Good Attitude and works well with others. Here's what we offer: Competitive wages, depending on experience Group Health Insurance Plan HRA & HSA Dependent Care FSA Dental & Vison Plans LTD, AD&D, & Life Insurance Supplemental Insurance Plans (AFLAC) 401k Plan (company matching) Paid Vacation & Holidays Paid accommodations for overnight travel/daily allowance pay Employee Stock Ownership Plan (ESOP) Climate Systems, Inc began like a lot of new companiesa couple of highly motivated individuals who wanted to control their own destiny got together and made a plan. In 1984, Dave Stadheim and Jim Ryan shared a belief that the Sioux Empire needed a highly innovative HVAC company that could serve the needs of mechanical contractors, engineers and the owners of commercial buildings. We recognize the key to success is being proactive, listening and constantly thinking of ways to fix our clients most critical needs. While our company has grown, this philosophy has never wavered. Thirty years later, we look forward to writing the next chapter in Climate Systems history. Climate Systems, Inc.is always looking for honest, hard-working individuals who love solving problems and working with people. No matter the position, you might just be the right fit for our company! For immediate consideration, apply today!! Climate Systems, Inc. is an equal opportunity employer.

Join Our Team as an Engineering Technician! The City of Casper is looking for a detail-oriented, motivated Engineering Technician to support a variety of municipal infrastructure and construction projects. In this role, you'll coordinate field work, perform construction inspections, create and update technical drawings and maps, and assist with survey and utility verification using GPS/GIS tools. You'll collaborate closely with engineers, contractors, and the public while contributing to projects that directly impact our community. If you have drafting or technical engineering experience, enjoy working both in the field and the office, and are ready to grow in a supportive, team-focused environment, we encourage you to apply. Incumbents are responsible for coordinating engineering projects, performing inspections of construction work, and completing drawings, maps and other documents as directed. REPORTING STRUCTURE: Receives general supervision from higher level engineering staff. Typical Class Essential Duties 1. Coordinates assigned construction and/or traffic control projects; estimates costs; inspects work, assesses progress; approves payments; approves minor modifications to plans; follows up on items under warranty; and maintains related records of activities. 2. Serves as a lead to lower level engineering staff; provides guidance, training, and mentoring opportunities. 3. Generates and updates maps, illustrations, plans, charts, and blueprints. 4. Provides records, maps and related documents to contractors and homeowners; provides information regarding engineering projects. 5. Surveys construction sites; calculates grades; determines boundary lines; and identifies technical problems. 6. Performs field verification, measurement, and mapping of existing utilities and right-of-way (ROW) limits; collects, records, and updates data using GPS and GIS systems; identifies discrepancies between field conditions and existing plans or records. 7. Locates water, sewer and storm sewer lines as assigned. 8. Prepares bidding documents and specifications for purchasing supplies, services, and equipment; prepares and obtains quotes. 9. Prepares complex drawings from engineering sketches, survey field notes, and other data for use in the design and construction of a variety of projects including water and wastewater lines, streets, and storm drains. 10. Prepares a variety of illustrations, certificates, visual aids for various meetings and presentations. 11. Represents the City of Casper by responding to the public, citizens, its employees, and others in a prompt, professional, and courteous manner while continuously maintaining a positive customer service demeanor. 12. Performs other duties of a similar nature or level. Knowledge (position requirements at entry): Knowledge of: * Trigonometry as applied to the computation of angles, areas, distances, and traverses. * Elementary surveying techniques and practices. * Engineering maps and records. * Engineering drafting and design terminology, methods, practices, and techniques. * AutoCAD and GIS software applications. * Basic surveying techniques and practices. * Basic engineering methods and procedures. * Construction inspection practices and procedures. * Standard office procedures and practices. * Customer service practices. * Utility infrastructure systems and right-of-way (ROW) standards and documentation practices. * GPS and GIS data collection methods for mapping and verification purposes. Abilities (position requirements at entry): Ability to: * Learn geographic area. * Read figures quickly and accurately and to make mathematical calculations. * Perform average engineering and mathematic calculations with speed and accuracy. * Use and care for drafting, surveying, and mechanical instruments and tools. * Understand and follow oral and written instructions and sketches. * Communicate clearly and concisely, both orally and in writing. * Learn, interpret, and apply City policies, procedures, laws, and regulations. * Organize records in an easily retrievable fashion. * Operate a variety of modern office equipment and tools. * Maintain a neat and professional appearance. * Follow written and verbal instructions and direction. * Communicate effectively verbally and in writing. * Establish and maintain effective working relationships with those contacted in the course of work. * Follow all City safety rules and procedures and immediately report all accidents/incidents or unsafe conditions to a supervisor. * Routinely demonstrate the City of Casper core values. Skills (position requirements at entry): Skill in: * Operating a computer and applicable software applications. * Reading and understanding drawings. * Performing mathematical calculations. * Drafting drawings, maps, blueprints, and related documents. * Surveying. * Mobile mapping. * Utilizing GPS equipment. * Project management. * Coordinating and inspecting construction projects. * Interpreting and updating utility and ROW maps and records. * Providing customer service. * Oral and written communication sufficient to exchange or convey information and receive work direction. Training, Experience & Certifications EDUCATION AND EXPERIENCE * High school diploma or equivalent (G.E.D.) required. * Minimum of two (2) years' experience performing drafting and technical engineering work. * Associate's degree in drafting & surveying, construction management, civil engineering or a related field is preferred or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed below. LICENSING AND CERTIFICATION * A valid Wyoming Driver's License is preferred. Supplemental Information & Physical Requirements The above job description is intended to represent only the key areas of responsibilities; specific position assignments will vary depending on the business needs of the department. Women, minorities, and individuals with disabilities are encouraged to apply. Employment with the City of Casper is contingent upon a successful background screen and pre-employment drug test. As a condition of employment, the successful candidate must utilize direct deposit for payroll purposes. Driving records are required for all new employees regardless of the position's driving requirements. If the employee has not held a Wyoming driver's license for the last three years, the employee must provide at their own initiation and expense a driving record from their previous state(s) of residence. Physical and Environmental Conditions: City of Casper employees in data creation and modification, security sensitive or safety and protective positions are subject to pre-employment drug testing. Some employees may be subject to random drug testing if their responsibilities include: * Emergency response/rescue * Handling or working with hazardous materials, including chemicals as well as solid and liquid waste * Operating or maintaining water and wastewater systems * Writing or modifying code, maintaining, or modifying City data systems including work on networks, servers, and communication systems * CDL operations and driving * Operating power-driven machinery or equipment * Creating or modifying health, financial, security and/or risk documents or assessments * Working with or directing minors Positions in this class typically require: climbing, balancing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, talking, hearing, seeing, and repetitive motions. Light Work: Exerting up to 20 pounds of force occasionally and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to lift, carry, push, pull or otherwise move objects, including the human body. If the use of arm and /or leg controls requires exertion of forces great than that for Sedentary Work, and the worker sits most of the time, the job is rated for light work. Incumbents in this position work indoors in an office environment and are subject to the common noises associated with office work including telephones, copiers, and printers. The position requires frequent sitting, typing, and customer contact, both by telephone and in person.

Assists engineers in the planning, design, development, fabrication, and testing of products, equipment, and processes for the Less Lethal product line. Uses engineering tools (CAD, engineering analysis, prototype fabrication techniques) to develop and test products from concept to production. Collect and prepare data for use in proposals. Design manufacturing process to meet cost, quality, safety, and schedule requirements. Provide technical support and troubleshooting for both in house and vendor processes. RESPONSIBILITIES Work closely with Engineers on developmental projects and produce prototype samples of varying degrees of complexity and material types Assist in product testing and recording data Analyze and evaluate results during and after product testing Provide interactive feedback to engineering team on samples and/or issues Compile testing data and reports - Conduct machine maintenance, as required Act as product liaison between development and manufacturing Support ISO 9001 QMS Perform other duties consistent with the position as required or assigned QUALIFICATIONS 0-3+ years' experience as an engineering technician in supporting mechanical design engineering efforts in a hands-on product development, manufacturing, or test and evaluation environment CAD and/or Solid Works experience Machining /fabrication experience Knowledge of machine shop equipment and procedures Proficient in various machine operations Experience with experimental data and writing technical reports Good understanding of fundamental engineering and physical principles Comfortable with firearms and explosives - Proficient in MS Office (Word/Excel) Excellent planning, organization and time management skills Must be able to work independently with minimum support from engineers Must be mechanically inclined and capable of constructing/modifying test fixtures utilizing standard electrical tools Familiar with set-up and operation of instrumentation and data acquisition systems in support of product testing Ability to prioritize and handle multiple tasks - Knowledge of CNC milling is a plus High school diploma or general education degree (GED) preferred Associate's Degree preferred Vocational training and/or relevant experience will be considered in lieu of education Employee is frequently exposed to toxic or caustic chemicals. Occasionally exposed to explosives. The noise level in the work environment is usually moderate.

Full-time Description AdaptHealth Opportunity - Apply Today! At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives - out of the hospital and in their homes. We are actively recruiting in your area. If you are passionate about making a profound impact on the quality of patients' lives, please click to apply, we would love to hear from you. Medical Equipment Technician Medical Equipment Technicians are responsible for ensuring safe delivery, providing setup, and education in usage of home medical equipment for our customers. Setup is done in their home, long-term care setting, clinic or any location deemed necessary to service patients. Job Duties: Develop and maintain working knowledge of current HME products and services offered by the company and all applicable governmental regulations. Comply with all applicable company policies and procedures. Educate customers in proper use and care of respiratory and HME equipment in a home setting. Complete required documentation following equipment setup, delivery or pickups as required. Assist with customer equipment problems under emergency conditions. Process all orders in a timely, accurate manner. Promote services and products to referral sources in the community as appropriate. Develop basic reimbursement knowledge and completely document all information necessary to ensure reimbursement for all appropriate equipment, products, and services. Assist with implementation of quality improvement program to meet company policies. Maintain home oxygen systems through regularly scheduled visits to customers. Safely drive and maintain company vehicle. Perform patient assessment and re-assessment for patient care. Perform routine preventative maintenance and simple repairs on equipment as required in accordance with company policies. Report equipment hazards and/or product incidents as required in accordance with company policies and procedures. Develop and maintain working knowledge of current HME products and services offered by the company. Assume on-call responsibilities during non-business hours in accordance with company policy. Retain knowledge of and consistently adhere to procedures for the use of Personal Protective Equipment (PPE), infection control and hazardous materials handling. Maintain patient confidentiality and function within the guidelines of HIPAA. Completes assigned compliance training and other educational programs as required. Maintains compliant with AdaptHealth's Compliance Program Responsible for cleaning equipment when assigned by supervisor or down time allows, following the Branch Maintenance and Cleaning Guidelines Perform other related duties as assigned. Requirements Minimum Job Qualifications: High School Diploma or equivalency Entry level sales, customer service background essential One (1) year of Military, delivery driver with sales component or health care technician experience would be considered related experience and preferred. Senior level requires two (2) years of work-related experience and one (1) year of exact job experience. Valid and unrestricted driver's license in the state of residence Physical Demands and Work Environment: Must be able to regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Must be able to stretch, bend, stoop and crouch and perform moderate to heavy physical labor while moving equipment and supplies. Subject to long periods of sitting and driving. Work environment may be stressful at times, as overall work activities and work levels fluctuate. May be exposed to unsanitary conditions in some home settings. May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen. May be exposed to high crime areas within the service community. Must be able to drive independently and travel as needed. May be exposed to angry or irate customers. Must be able to access the patient's residence without assistance. Mental alertness to perform the essential functions of position. Ability to effectively communicate both verbally and written with customers with the ability to demonstrate empathy, compassion, courtesy, and respect for privacy. AdaptHealth is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individual's race, color, religion, creed, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other status protected by applicable law. This policy applies to all terms, conditions, and privileges of employment, including recruitment, hiring, placement, compensation, promotion, discipline, and termination.

Job Description About Us Are you ready to be part of a team that is bringing revolutionary technology to the remediation industries? DISA Technologies is revolutionizing mineral recovery with our patented High-Pressure Slurry Ablation (HPSA) technology-an innovative solution that upgrades critical minerals from mined ore and legacy waste. Serving both the mining and remediation sectors, we recover valuable resources that power industry, strengthen energy independence, and restore contaminated sites to productive use. Our technology unlocks economic and environmental value, transforming how the world processes, remediates, and recycles essential mineral assets. Job Summary The Instrumentation & Electronics (I&E) Technician is responsible for designing, developing, and optimizing automation and control systems to support efficient, safe, and sustainable operations in minerals processing. This role integrates advanced technologies-including PLC systems and data analytics to enhance process reliability, enable predictive maintenance, and drive real-time optimization. The Controls Engineer will collaborate with cross-functional teams, external partners, and stakeholders to advance innovation while ensuring compliance with industry standards, environmental regulations, and workplace safety. Education/ Experience Certification or Associates degree in Electronics, Instrumentation, or comparable relevant on the job experience required. 3-5 years of experience in implementing control systems preferably in the mining or oilfield service sectors preferred. Supervisor Engineering Manager, unless otherwise designated. Typical Job Duties and Responsibilities Design and optimize PLC-based control systems for minerals processing applications. Document control of system architecture, programming standards, and operational procedures. Provide technical expertise and troubleshooting support for control systems and automation solutions. Collaborate with cross-functional teams, consultants, and strategic partners on R&D initiatives and system optimization projects. Ensure all control systems comply with industry standards, environmental regulations, and health and safety protocols. Train junior engineers, operators, and stakeholders on the use and maintenance of control systems. Stay current with emerging trends and technologies in controls, automation, and data analytics to implement innovative improvements. Abide by all policies and procedures established by DISA. Attend and participate in all required safety trainings. Assist with any task required by the direct supervisor. Requirements Required Skills Demonstrated strong knowledge of PLC programming, ladder logic, Siemens, Rockwell, SCADA systems, or Allen Bradley, and other industrial automation practices. Prior experience with HMIs like Redlion and Siemens, preferred. Exhibit strong mechanical aptitude and safely operate, maintain, or troubleshoot industrial equipment. Apply strong analytical and problem-solving skills to manage multiple projects effectively. Communicate clearly and professionally, both verbally and in writing, to collaborate with colleagues, stakeholders, and clients. Organize and prioritize tasks to meet deadlines while managing multiple projects. Collaborate effectively as part of a team, supporting shared goals and fostering positive relationships. Adapt to dynamic environments and identify solutions to challenges with flexibility and problem-solving skills. Maintain professionalism with high attention to detail, reliability, accountability, and accuracy in all work deliverables. Uphold and demonstrate DISA's Values of Dedication, Innovation, Sustainability, and Accelerate Change. Ability to follow safety protocols and maintain compliance with OSHA/MSHA and company safety standards. Be a valid U.S. citizen or legally authorized to work in the United States. Possess a valid driver's license with a clean driving record. Physical Requirements Must be able to sit and/ or stand for extended periods of time. Must be able to lift up to 50 lbs. occasionally. Must be able to interact with people and technology while either standing or sitting. To best service our customers, all employees must be able to communicate face-to-face and on the phone with or without reasonable accommodation. Ability to travel up to 25%. Must be able to perform repetitive tasks such as typing. DISA Technologies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. Benefits Bonus Pool 401(k) with matching up to 4% Health insurance Dental insurance Vision insurance Life insurance Paid holidays Paid time off Professional Development

If you are ready to start the new year with a new career, look no further than C & B Operations. We have 36 John Deere dealerships in 6 states. We are searching for a detail oriented, experienced equipment technician/mechanic for our Freeman, South Dakota location. This individual will perform diagnostics, service repairs and maintenance work on customer and/or dealer-owned agricultural equipment. Benefits: Qualified applicants must be able to successfully complete a pre-employment drug test and background check. C & B Operations, LLC is a drug-free workplace. Competitive pay based on your experience Excellent benefits including - Medical, Dental, Vision, and Accident Insurance, Short-Term Disability, Life Insurance and generous 401k match Progressive Paid Time Off and Paid Holidays Opportunities to grow - We love to promote within and have excellent training programs available to prepare you on-the-job and for your future with us. Essential Duties: Performs diagnostics and repairs on agricultural farm equipment Participates in Training programs required for the development of skills and knowledge Completes all job notes required in conjunction with work assignments Accounts for all time on a digital timecard and for all material used in performing assigned duties Maintains current product knowledge of John Deere and competitive products Maintains a clean work area and performs work in a neat and orderly fashion Maintains condition of vehicles, inventory, tools, and equipment Promotes and sells the service department to customers including service work, inspections, and parts to increase customer safety and satisfaction Follows all safety procedures and works in a safe manner Assists with other duties that may be assigned Qualifications: Associates or better in Diesel Technology or related field, preferred Ability to meet physical demands and duration of physical exertion generally required to perform tasks in support of all job functions, for example - sitting, standing, walking, lifting, carrying, reaching, pushing, and pulling Ability to work in a team environment Knowledge of methods, materials, tools and techniques used in the repair of machinery, engines and other related equipment Experience with mechanical, electrical, and hydraulic systems Ability for critical thinking and resourcefulness to complete tasks Willingness to learn and train in new technologies Ability to work overtime to meet customer demands Valid Drivers License and a safe driving record Able to promote within and have excellent training programs available to prepare you on-the-job and for your future with us. Our goal is to improve the quality of work life by using fair and consistent treatment and providing equal growth opportunities for all team members. We are an equal opportunity employer as defined by federal, state or local laws. Apply today at Careers for this exciting opportunity!