Electronics technician jobs in Redlands, CA - 394 jobs

Definition Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff. Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements. Essential Functions Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience. ESSENTIAL FUNCTIONS:Incumbent must have the ability to: Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation. Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments. Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements. Provide public assistance at counter and over the telephone. Prepare quantity and cost estimates for engineering projects. Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes. Review engineering plans to determine appropriate layout of construction projects. Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades. Make and check mathematical calculations related to surveying, drafting and basic engineering. Maintain accurate survey records in the form of field notes and sketches. Participate in a variety of engineering design and planning work related to municipal engineering projects. Answer questions and provide information to the public concerning engineering activities. Assist in development and maintenance of the record keeping and filing systems. Prepare, assemble and distribute copies of maps, charts and blueprints. Answer questions and provide information to the public concerning engineering activities. Perform any other tasks or functions deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS: Position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, and stooping in the performance of daily activities. The position also requires grasping, repetitive hand movement and fine coordination in preparing reports using a computer keyboard. Additionally, the position requires near and far vision when preparing and reading written reports and other work related documents. Acute hearing is also required when providing phone and counter assistance. Experience and Training Guidelines EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of: Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of: Terminology, methods, practices and techniques of drafting. Trigonometry as applied to the computation of angles, areas, distances and traverses. Elementary surveying techniques and practices. Engineering maps and records. Ability to: Perform moderately complex engineering and mathematic calculations with speed and accuracy. Understand and follow written instructions and sketches. Use and care for drafting, surveying, and mechanical instruments and tools. Work independently in the absence of supervision. Experience: Engineering Technician II - Two years of increasingly responsible experience performing drafting and technical engineering work. Education: Equivalent to completion of the twelfth grade supplemented by specialized training in drafting, surveying or a related field. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? High School graduate or equivalent Some college Trade school graduate or Apprenticeship Associate's degree in related field Bachelor's degree in related field Bachelor's degree or higher in non-related field Equivalent to Bachelor's degree in related field Master's degree or higher in related field None of the above 02 Please indicate how much experience you have in performing drafting and technical engineering work. No experience Less than one (1) year. One (1) year or more year(s) but less than two (2) years. Two (2) or more years but less than four (4) years. Four (4) or more years but less than six (6) years. Six (6) years or more but, less than eight (8) years. Required Question

ID 2025-17889 Element has an opportunity for a Test Technician to join our rapidly expanding team.As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision. The technician positions must be proficient in a number of core business skills including but not limited to compliance to established safety rules, code of conduct, and company policies and procedures. Salary: $25- $35/hr DOE Responsibilities * Perform work duties provided by immediate Lead, Supervisor or Manager. * Clean, assemble and test various valves and filters following written procedures and other appropriate documentation. * Interpret assembly setup requirements from written procedures and successfully complete assembly. * Interpret test system schematics and successfully construct test system by obtaining correct system components and fabrication of stainless-steel tubing, including cutting, bending and flaring. * Interpret test setup requirements from written procedures and successfully test component. * Perform testing using gases (Nitrogen and helium) and water. * Perform testing at ambient temperatures as well as extreme cold and hot temperatures during thermal testing. * Read and interpret test data and record neatly and accurately on appropriate data sheets. * Recognize and report any out-of-family conditions or discrepancies. * Maintain a clean and safe work area at all times. * Maintain assembly and test setups in good working order. Skills / Qualifications * The technician must have a minimum of (1) year experience in a similar work environment. * Must be able to setup and operate tools required for assembly including, but not limited to, standard hand tools, load testing devices, micrometers, depth mics, calipers and microscopes. * Technician must possess basic blueprint reading and comprehension skills. * Must be able to setup and operate equipment required for testing including, but not limited to, multimeters, ohmmeters, voltmeters, pressure, gauges and transducers, data recorders, load cells, and flowmeters. * Good verbal and written communication skills. * Basic mathematic skills required to calculate simple formulas and conversions. * Strong problem-solving reasoning skills are must. * Familiar with a P&ID schematic drawing and interpretation. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Job Posting Start Date 12-05-2025 Job Posting End Date 02-26-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Electrical Test Technician in USA, Fontana Ca. Reporting to the Electrical Engineering Manager, the Electrical Test Technician is responsible for completing electrical testing of products during the manufacturing process based on established testing procedures. What a typical day looks like: Follow AC/DC schematics and wiring diagrams to do testing of main electrical distribution AC/DC systems Perform testing on various systems including HVAC system, lighting, receptacles, fans, fire alarm systems, battery system, and meggering of cables Work closely with engineering and production team members to ensure accurate, efficient and timely execution of required testing work Be able to troubleshoot assembly, wiring and testing problems Drafts detailed technical reports to present findings; based on findings, recommends modifications needed to correct production problems Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent; associate's degree in electrical engineering or related field preferred. 2+ years' experience in electrical testing or related field Knowledge in testing of three phase AC and DC control circuits. Good working knowledge of standard electrical testing and measuring equipment Knowledge of Electrical Safety Procedures and NEC Codes Excellent verbal and written communication skills with the ability to discuss product flaws in a constructive and positive manner. Excellent interpersonal skills. Excellent organizational skills and attention to detail. Strong analytical and problem-solving skills. Proficient with Microsoft Office Suite or related software to prepare test reports and proposals. What the physical requirements are: Periods of standing, walking, and sitting at a desk using a computer Must be able to lift up to 30 pounds at a time Must be able to traverse production facility to complete testing Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$21.30 USD - $28.75 USD HourlyJob CategoryProduction Engineering Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

The Electrical & Instrumentation (E&I) Technician is responsible for installing, maintaining, calibrating, troubleshooting, and repairing electrical systems and instrumentation equipment used to monitor and control industrial processes. The technician ensures all work is completed in compliance with safety and operational procedures. Key Responsibilities: Install, maintain, and repair electrical systems, motors, VFDs, panels, and wiring in accordance with electrical codes and safety standards. Calibrate, troubleshoot, and repair instrumentation devices such as flow meters, pressure transmitters, temperature probes, level sensors, and control valves. Perform preventive and predictive maintenance on electrical and instrumentation systems. Use PLCs, DCS, and SCADA systems for troubleshooting and control adjustments. Read and interpret electrical and instrumentation schematics, P&IDs, loop diagrams, and wiring diagrams. Ensure all documentation for maintenance, calibration, and repairs are properly completed and filed. Support plant operations by responding to equipment failures and process disruptions. Work closely with engineers, maintenance staff, and operations to improve equipment reliability. Comply with all company safety procedures, policies, and regulatory guidelines (e.g., NEC, OSHA, NFPA 70E). Qualifications: Education/Experience: High school diploma or GED required. Associate's degree or technical certification in electrical/instrumentation or industrial technology preferred. Minimum 3-5 years of experience in a heavy industrial or manufacturing environment. Certifications (Preferred but not required): ISA Certified Control Systems Technician (CCST) Journeyman Electrician License OSHA 10/30 or NFPA 70E Training Skills: Strong knowledge of AC/DC electrical systems, instrumentation calibration, and process controls. Familiarity with PLC programming and HMI/SCADA interfaces. Proficient in the use of diagnostic tools (multimeters, meggers, calibrators, etc.). Ability to work from heights, in confined spaces, and in all-weather conditions. Strong problem-solving and analytical skills. Work Environment & Physical Requirements: Must be able to lift up to 50 lbs, climb ladders, and work in elevated areas. Exposure to noise, dust, chemicals, and varying temperatures. Must be willing to work overtime, on-call, or rotating shifts as needed.

Starship Technologies is revolutionizing deliveries with autonomous robots. These robots are designed to deliver food, groceries, and packages across college campuses and neighborhoods in minutes. Starship has now completed millions of autonomous deliveries to date, traveled millions of miles and is currently doing more than 140k road crossings each day. Our contribution to society includes reducing congestion, and pollution, providing zero-emissions deliveries, increasing the quality of life for residents, empowering seniors and disabled people, and enabling affordable delivery for local businesses. We're hitting records on an almost weekly basis. Now is an exciting time to join as we grow rapidly around the world! The environment will be similar to a fast-paced restaurant/workshop while allowing you to plunge into a cutting-edge technological environment working directly with our autonomous robots. Our Robot Technicians will execute robot fleet repair throughout the shift, troubleshoot unexpected situations that may arise, and work effectively to keep our robots in operation. Job Responsibilities: Technical Tasks: * Maintaining the health of our global fleet of robots through daily maintenance and repair tasks. Which can include but is not limited to - diagnosing unforeseen problems, troubleshooting equipment malfunctions, and repairing or replacing faulty equipment (tires, electronics, motors). * Carrying out preventive maintenance activities and upgrades on robots and infrastructure. Monitoring and servicing our internal systems, running tests and completing reports, and completing updates or improvements to existing systems as appropriate. * Perform root cause analysis to identify the causes of faults or problems and systematically develop a solution to prevent/solve underlying issues. Operational Tasks: * Accurately document all tasks/partner or internal messaging related to service concerns or robot-related issues using appropriate applications/tools. * Maintain a clean and organized hub by performing accurate spare parts inventory audits twice a week and ensuring all tools are accounted for and returned to their proper location after use. * Work with our engineering team to identify any potential improvements regarding robot health and design. * Assist our Operational Team and vendors/merchants by providing in-person assistance through performing weekly Merchant Preflights to understand any service-related issues, provide operational and troubleshooting assistance related to Starship-provided devices, and act as a Starship brand representative while interacting with clients. * Occasionally support our Operational Service team by assisting with Robot field rescues or operational services tasks when needed. * Other duties as assigned. Minimum Qualifications: * A passion for robots and innovative technologies. * Currently pursuing a degree in Engineering or another related STEM field. * Previous experience in Technical Support and with any service desk application is beneficial, but not required. * Good knowledge regarding mechanics, electronics, and IT. * Excellent client-facing skills. * Self-starter; takes initiative, can work without supervision and begin projects independently. Experience & Education Requirements: * Knowledge of Unix/Linux systems, CLI tools, and scripting preferred, but not required. * Hobby projects in electronics or mechanics. * Previous experience in managing a large fleet of devices. Physical Requirements: * Movement ability to frequent usage of wrists, hands and finger dexterity to movements such as constant typing, as well full-body exertion while wrangling the robot fleet. * Occasional lifting of items with weight up to 70 lbs. * Comfortable riding an ebike on various terrain. What's in it for you? * Opportunity to work on industry-leading self-driving delivery robot technology on a uniquely large scale, creating history and making things happen * You can immerse yourself in the world of technology and innovation * You will have a chance to work with people with a strong inner burning and motivation. We are self-aware and seek feedback and improvement. We don't want to wait until we are told what needs to be done but take it as a matter of pride to figure out solutions for topics in various teams and areas * You'll have endless opportunities to learn from our inspirational, talented team members across the globe Ready to join our Starship fleet? Apply today! Job Type: Part-time with flexible hours Only candidates who send resumes will be considered. Please include your availability when applying. Early application is encouraged. Check out our website to find out more about us: ************************ Department US Operations Locations Pomona, CA Employment type Part-time

Essential Duties And Responsibilities Include the following. Other duties may be assigned. Installs access control devices, adapting current keying systems and protocols, within the parameters of existing University resource protection policies. Installs, or assists with overseeing the installation, integration, programming, and repair of electronic access controls, including proximity card and swipe card hardware. Interprets Master Keying Guide; use appropriate discretion and special knowledge of lock systems to preserve the integrity of the University's master key system, while meeting customer needs. Inputs and retrieves data in a prescribed format, utilizing knowledge of various computer software packages. Troubleshoots, repairs, and maintains mechanical locks and electronic key card systems. Installs door hardware and hydraulic closing fixtures. Rekeys locks, cuts and issues keys as requested. Documents facilities maintenance requirements, maintains appropriate records of work performed. Ensures proper care in the use, and maintenance, of equipment and supplies; promotes continuous improvement of workplace safety and environmental practices. A valid California Driver License is required.

Our customer in seeking to hire quickly !! Day shift: 6AM-2:30PM, M-F (40+ hours per week) Are you a hands-on electronics expert with a passion for precision and problem-solving? Join a dynamic team, where innovation meets excellence in electronic systems repair, testing, and quality assurance. What You'll Do As an Electronics Technician, you will: Diagnose and repair digital and AC electrical systems down to the component level using schematics and test equipment. Utilize industry-standard tools including oscilloscopes, multi-meters, signal generators, soldering stations, and more. Analyze test data and generate detailed performance and failure reports. Maintain accurate records of testing, repairs, and component delivery using our PCB Repair Time Distribution Log. Perform preventive maintenance on lab equipment and ensure documentation is up to date. Support on-site installation, maintenance, and emergency repairs. Conduct electrical quality assurance testing in compliance with ISO 9001 standards. Develop and document test procedures independently, ensuring compliance with company standards. What You Bring Experience: 5+ years in electrical systems, electronic fabrication, testing, and troubleshooting. Education: Associate degree in Electronics or equivalent technical certification and experience. Skills: Proficient in reading schematics and working from verbal instructions or samples. Strong understanding of digital electronics, AC/DC power systems, and mechanical geometry. Familiarity with ISO 9001, calibration systems, and preventative maintenance techniques. Physical Ability: Comfortable with office and lab work, lifting up to 25 lbs, and performing on-site installations. Why Join? Work in a clean, professional, and well-equipped electronics lab. Be part of a team that values quality, innovation, and continuous improvement. Flexible scheduling to support project needs and customer demands. Opportunities for growth and development in a high-tech environment. For Immediate consideration, email your resume today to: carolina.martinez@kpg-inc.com or call 951-256-4707. Looking forward to working with you !!

About Our Client: Our client, a Fortune 500 Medical Device company, is recognized as one of the “World's Best Workplaces” and a “Best Workplace for Diversity” by Fortune Magazine! This company has climbed to the top, gaining a reputation for both excellence and satisfaction and is hiring individuals who are self-motivated, results driven, and take pride in the impact their work has on patients and healthcare professionals. Key Responsibilities: Supporting and assisting engineers in designing, developing, producing, and testing components and equipment. Preparing detailed technical drawings, schematics, and layouts to support engineering projects. Conducting materials testing, analyzing results, and documenting findings. Performing equipment maintenance, calibration, and mechanical/electrical repairs. Monitoring and testing prototypes, models, and products under development. Writing technical reports, identifying issues, and suggesting corrective solutions. Collaborating with engineers and cross-functional teams to resolve technical problems. Operating, troubleshooting, and maintaining complex instruments, gauges, and testing equipment. Qualifications: Technical training or hands-on experience preferred. Demonstrating experience with complex instruments, testing equipment, and gauges. Applying technical troubleshooting skills to mechanical and electrical systems. Utilizing attention to detail and problem-solving to support engineering projects. Showing knowledge of CAD software or other engineering tools. Applying familiarity with manufacturing processes and product development cycles. Demonstrating effective communication skills in documenting and presenting technical findings. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Overview At MasTec Communications Group we build for the future. Yours and ours. As a Radio Technician III, you will develop new skills, work in a safety-minded environment, and join us in expanding technology for a better community. Join the MasTec family and help us provide the highest level of quality service to our customers and communities while maintaining our commitment to safety! Responsibilities As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport Qualifications About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Radio Tech I $24-$26 Radio Tech II $27-$30 Radio Tech III $31-$34 Sr Radio Tech $35-$40 Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers About You: Safety is a part of your day to day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum 5+ years of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills; verbal, written, and presentation. Possess excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have strong attention to detail Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Radio Tech I $24-$26 Radio Tech II $27-$30 Radio Tech III $31-$34 Sr Radio Tech $35-$40 Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers As a Radio Technician III, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and advanced understanding of applications related to transport

Performs technical skills and provides assistance to surgeons, anesthesia personnel, registered nurses, and other professionals in the operating room. Performs similar duties in other areas of the hospital as assigned. Independently scrubs on all surgical procedures. Demonstrates ability to problem solve in relation to the procedure being performed. Applies basic knowledge of anatomy and physiology, medical terminology, microbiology, and pharmacology for optimum surgical patient care. Demonstrates knowledge and practice of patient care concepts. Applies the principles of asepsis during surgical procedures. Responsibilities Prepare instruments. * Decontaminate used instruments using appropriate technique. * Examine instruments for damage. Send out for repair as needed. * Lubricate instruments as needed. * Prepare instrument sets using appropriate listing. Assures sterility of supplies and equipment. Packages all supplies and equipment. * Checks all sterile supplies for sterility expiration dates and packaging. * Removes all outdated supplies from service and reprocesses them for sterilization. * Packages all supplies, equipment and instrument trays for sterilization using prescribed procedure. * Takes instruments/supplies to CS for sterilization. Maintains routine cleaning of furniture and equipment. * Cleans shelves, furniture and equipment using prescribed procedure as required. * Assists in cleaning the OR between cases as necessary. Professional Conduct * Employee has the willingness and ability to perform additional duties and responsibilities in different areas of the department on an as-needed basis or as determined by management. * Follows attendance and all other est. hospital/dept. policies. * No more than 2 written substantiated complaints representing a breach of policy, procedure or professional behavior since last evaluation. * Demonstrates the philosophy of team concept. * Participates in staff meetings with suggestions that enhance the work environment and increase productivity. * Communicates well with supervisor reporting problems with equipment, supplies. Requests assistance as appropriate. * Maintains confidentiality as related to job responsibilities. * Exhibits willingness to resolve problems as they arise. * Consistently projects positive professional image through appearance and behavior. * Attends 75% of staff meetings or reads and initials minutes. * Consistently arrives on time. * Does not exceed sick time allowance. Guest/Interdepartmental Relations * As observed by representatives of management, all interactions are conducted in a professional manner. * Verbal and written feedback from patients, family members/significant others, medical staff, visitors and co-workers indicates behavior conducive to positive guest relations. * Consistently exhibits appropriate phone protocol (e.g., answers phones promptly, is courteous and helpful). * Consistently contributes to the team effort (e.g., assists co-workers when need is observed or upon request, offers constructive suggestions rather than complaints). * Consistently displays cheerful and positive attitude. Professional Growth and Development * Completes annual safety updates within established time frames. * Completes general and departmental orientation within established time frames. * Attends 80% of in-service programs. Performance Improvement * Consistently strives to understand, anticipate and meet the needs, expectations and satisfaction levels of patients and other "customers". Errors, inefficiencies and inaccuracies are brought to management's attention with suggestions for improvement. Develops innovative solutions to departmental problems. Identifies and implements methods of controlling costs or generating revenue while providing maximum value to both the patient/customer and the hospital. Maximizes efficiency in all departmental operations. Measures progress against quality goals. Qualifications * Minimum Education: High School Graduate * Minimum Experience: One year experience as a CS Tech (Preferred) * Required Certification/Registration: BCLS

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Automation Technician III As an Automation Technician III at Niagara Bottling, you will be working on the production floor with plant Automation technicians at Niagara facilities around the country. Tasks include performing advanced troubleshooting, upgrades on production lines automation systems and providing technical support to those plants that need help. You will also be responsible for training and mentoring the plant Automation technicians. Essential Functions Providing Plant Support for Niagara Facilities Provide aid and expertise to plant maintenance and automation teams Aid in any needed repairs on production machinery, as necessary Troubleshoot and repair complex machine electrical issues Automated Upgrades Perform root cause analysis for automated machine upgrades Research and Development of innovative technologies for increased output and reducing labor Technician Training Share knowledge with the plant electrical and automation technicians Seek out training opportunities for team development and report to Technical Engineering Manager Travel Requirements: Approximately 75% of the year Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 4 Years - Experience in Field or similar manufacturing environment 4 Years - Experience in Position 0-1 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 6 Years- Experience in Field or similar manufacturing environment 6 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies Proficiency in, but not limited to: AB Automation software Siemens Automation software B&R system knowledge for troubleshooting Microsoft Office Applications - Word, Excel, Access, PowerPoint, Outlook, Visio, etc. Able to work alone and with others Often sent out for plant support alone with minimal supervision Often working in conjunction with plant electrical maintenance staff Strong analytical and problem solving skills Self-Motivated with a proven record of taking the initiative Detail-Oriented with Excellent Oral and Written Communication Skills Able to execute tasks in a very dynamic and ever-changing environment Exercise sound judgment and ability to work effectively with a diverse workforce Education Minimum Required: Associate's Degree in Engineering or other related field Preferred: Bachelor's Degree in Engineering or other related field Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$28.90 - $41.91 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

As an Engineering Forge Technician, you will work closely with engineers and other technical staff to provide support in forging process and quality. Their primary purpose is supporting the manufacturing of parts through hydraulic presses. They will work with the forging team as well as design engineering, metallurgy, quality, and other departments to implement improvements in the forge shop. In addition, they will constantly look to improve current procedures and processes. POSITION ESSENTIAL FUNCTIONS INCLUDE BUT ARE NOT LIMITED TO: Monitor forging process and provide active communication between operations and engineering team. Provide real-time inspections to validate forging process and quality. Support development and improvement to forging process instructions and routing. Execute plans for improvement projects both in the forge shop and throughout the entire plant. Activities will include mechanical design of tooling, workstations, and other apparatus used in manufacturing process. Identify equipment issues that impact personnel safety and product quality. Support maintenance/facilities engineering during troubleshooting and correction. Support root cause analysis and development of corrective actions for product which had difficulties during manufacturing or does not meet customer requirements. Manage various aspects of the implementation of corrective actions that result from this analysis. Seek improvement opportunities and implement changes to manufacturing procedures to reduce cost, increase efficiency, improve safety, and reduce lead time. Work with forging department supervision, design engineering, metallurgy, quality, and other production departments to facilitate these changes. Develop strong relations with all operating departments and personnel to ensure that shop floor manufacturing issues are addressed. Work to get buy-in from those directly affected by manufacturing changes. Support capital projects in various areas of the plant. Be an active participant in continually improving all aspects of the manufacturing operations. Follow all safety guidelines set forth by ATI Forged Products. Other job duties as assigned. ESSENTIAL SKILLS & ABILITIES Ability to read blueprints required Proficient with producing dimensioned drawings using common design software (AutoCAD & NX) Participation in multidisciplinary team Work in a manufacturing/production environment Familiarity with KPI's and metrics Experience with electrical and electronics a plus Aptitude for problem solving & troubleshooting basic obstacles Familiarity with metallurgical concepts preferred Familiarity with pyrometry a plus Familiarity with GD&T a plus Proficient math skills. Excellent oral and written communication skills Exceptional interpersonal skills Excellent organizational skills with the ability to multi-task Must be able to read and comprehend safety and work instructions BASIC JOB REQUIREMENTS (Equivalent combinations of education, licenses, certifications and/or experience will be considered) Bachelor's degree in an engineering or related technical discipline (mechanical or manufacturing engineering preferred) Familiar with machining processes Ability to read and comprehend blueprints 1 or more years of experience in a manufacturing environment Above average knowledge of Microsoft Office, especially Excel 1-3 years of experience operating a forklift. Ability to lift 50 lbs. Salary Range: $31-$45 Work schedule: 5am-130pm Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

As an Engineering Forge Technician, you will work closely with engineers and other technical staff to provide support in forging process and quality. Their primary purpose is supporting the manufacturing of parts through hydraulic presses. They will work with the forging team as well as design engineering, metallurgy, quality, and other departments to implement improvements in the forge shop. In addition, they will constantly look to improve current procedures and processes. POSITION ESSENTIAL FUNCTIONS INCLUDE BUT ARE NOT LIMITED TO: Monitor forging process and provide active communication between operations and engineering team. Provide real-time inspections to validate forging process and quality. Support development and improvement to forging process instructions and routing. Execute plans for improvement projects both in the forge shop and throughout the entire plant. Activities will include mechanical design of tooling, workstations, and other apparatus used in manufacturing process. Identify equipment issues that impact personnel safety and product quality. Support maintenance/facilities engineering during troubleshooting and correction. Support root cause analysis and development of corrective actions for product which had difficulties during manufacturing or does not meet customer requirements. Manage various aspects of the implementation of corrective actions that result from this analysis. Seek improvement opportunities and implement changes to manufacturing procedures to reduce cost, increase efficiency, improve safety, and reduce lead time. Work with forging department supervision, design engineering, metallurgy, quality, and other production departments to facilitate these changes. Develop strong relations with all operating departments and personnel to ensure that shop floor manufacturing issues are addressed. Work to get buy-in from those directly affected by manufacturing changes. Support capital projects in various areas of the plant. Be an active participant in continually improving all aspects of the manufacturing operations. Follow all safety guidelines set forth by ATI Forged Products. Other job duties as assigned. ESSENTIAL SKILLS & ABILITIES Ability to read blueprints required Proficient with producing dimensioned drawings using common design software (AutoCAD & NX) Participation in multidisciplinary team Work in a manufacturing/production environment Familiarity with KPI's and metrics Experience with electrical and electronics a plus Aptitude for problem solving & troubleshooting basic obstacles Familiarity with metallurgical concepts preferred Familiarity with pyrometry a plus Familiarity with GD&T a plus Proficient math skills. Excellent oral and written communication skills Exceptional interpersonal skills Excellent organizational skills with the ability to multi-task Must be able to read and comprehend safety and work instructions BASIC JOB REQUIREMENTS (Equivalent combinations of education, licenses, certifications and/or experience will be considered) Bachelor's degree in an engineering or related technical discipline (mechanical or manufacturing engineering preferred) Familiar with machining processes Ability to read and comprehend blueprints 1 or more years of experience in a manufacturing environment Above average knowledge of Microsoft Office, especially Excel 1-3 years of experience operating a forklift. Ability to lift 50 lbs. Salary Range: $31-$45 Work schedule: 5am-130pm Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

Responsibilities Data acquisition, collection and logging Collect and log raw physical and/or electronic data generated during events in support of test, training, maintenance and sustainment events. Source data collection from government or contractor sites via tapes, CD's, hard drives, or other media containing audio or visual information. Data includes configuration, logistic, test, warranty, contract, history, and maintenance information. Perform data acquisition through online data mining and receipt/processing of data submissions in hard copy and electronic formats to include document receipt, control, distribution, and archiving electronically ensuring access, retrieval, and accounting of documents acquired. Before an event, compile pre-assessment documentation and ship configuration files to develop an equipment plan for an assessment event. Before an event, generate Work Packages required to assess equipment and document ship's discrepancies during an assessment event. Courier data as required to and from designated CONUS or OCONUS location(s). Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies, selecting methods of data presentation. Requirements Experience Experience with IT systems including LINUX, Windows Power Shell command line Any of the following: CompTIA ITFF+, A+, Network+, Security+ are highly desirable Experience with Data Management Experience with reading, reviewing, and interpreting engineering and design drawings Experience working on US Navy ships in port and underway Very good written and verbal communication, along with effective time management skills Qualifications and Education Requirements 5+ years of experience working in a Engineering Technician role This position requires an existing U.S. Government granted personnel security clearance at the Secret level U.S. Citizenship is required Available to travel up to 25% Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. The hiring wage range is $ 30.60 to $ 35.20 per hour.

The Engineering Technician will diagnose, disassemble, rebuild and align precision machine tools and equipment. Perform routine to complex machinery repairs and maintenance. Performs scheduled preventive maintenance. Responsible for developing and testing solutions to solve technical problems in research and development, manufacturing, and maintenance. Assists engineers, designs, conducts tests, and collects data. Analyze, evaluate, and update machine PM intervals. To perform this job successfully, an individual must be able to satisfactorily perform each essential requirement to represent the knowledge, skill, and/or ability. ESSENTIAL DUTIES AND RESPONSIBILITIES: Other duties may be assigned. Reasonable accommodation for disabilities may be made for one or more of the following: Create solutions to complex technical problems. Inspect processes for flaws and identify areas of improvement. Conduct tests and collect data. Assist in production design, and development. Build and set up equipment. Utilize computer-aided design and drafting equipment during design phase. Estimate costs and specify materials to be used. Design, develop, test, and manufacture electronic and computer-controlled mechanical systems to support improvement processes. Updates CMMS system to ensure effective and lean PM routines. Follow all 5S department procedures which include but are not limited to; keeping floors clean of oil and debris, returning tools to proper locations, organize part pans, and performs other housekeeping duties. Installs and repairs electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment. Locates, installs, maintains, test and repairs electronic equipment and circuits by working from procedures, specifications, blueprints, wiring and schematic diagrams, verbal and written instructions and following established electronic practices. Diagnoses malfunctioning apparatus such as transformers, motors, and replaces damaged or broken wires and cables. Understands and installs/repairs PLC controls and interface. Responsible for the complete rebuilding of precision machine tools and equipment. Reassemble machines after the completion of repair or maintenance work. Determines methods to use in tear down, rework, alignment or renewal, assembly and functional test of machine tools. Determines and performs precision measurements to achieve alignment required between all functional planes. Modifies existing machinery and equipment to facilitate new production techniques under the direction of the engineering department. Installs and rigs machinery, breaks down, levels and checks out according to manufacturers specifications. Assist team members, when necessary, on breakdowns and when servicing equipment. Uses hand tools, power hand tools and voltage meters. Welding within the company safety guidelines and procedures. Assists in all areas of new construction and remodeling of new facilities. Follow all department and company measures to help protect workers from potentially hazardous work methods, processes, or materials. Responsible for complying with the rules and regulations set forth by Federal, Local, and State government, LISI Aerospace, and HSE Procedures. Responsible for attending all training provided and for adhering to all HSE procedures, policies, and plans, conforming to reporting requirements, and safe operating procedures at all times. Required to bring any known or suspected nonconformance for all company procedures or legal requirements to management's attention immediately. Seek opportunities to improve our HSE performance by establishing objectives and targets, measuring progress, and reporting our results. Suggests waste elimination initiatives specifically related to the function and department such as recycling opportunities and elimination of paper waste. Performs other duties and responsibilities as required. WAYS OF WORKING, EXPERIENCE, AND BEHAVIORS To perform the job successfully, an individual should demonstrate the following competencies: Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Understands work flows and procedures, production control and knowledge of continuous improvement. Technical Skills - Mechanical - bearings, mechanical power transmission, chain drives, belt drives, gear drives, couplings, mechanical fasteners, packing and seals, pumps, conveyors, pipe fittings and valves, steam lines and traps. Ability to perform a variety of machine shop equipment, including hand and power tools. Hydraulic/Pneumatic - principles of hydraulic and pneumatic power, hydraulic fluids, piping and sealing, reservoirs, actuators, directional controls, servo valves, pressure controls, volume controls, pumps, motors, air compressors, etc. Electrical -understands and uses intermediate to advance knowledge of electronic controls, voltage, resistance and amperage measurements, testing and evaluation, and lock out/tag out procedures. Welding- all types of welding. Forklift operation- safety and handling. Oil and Filtration. Types and safety. Metal scraping and waste disposal. Types and safety. Design and fabrication- ability to improvise new solutions to special cases. Oral and Written Communication - Speaks clearly and persuasively in positive or negative situations; listens intently to others and seeks clarification; Provides clear and pleasant responses to inquiries regardless of the situation. Team Work - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests. Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Aligns work with strategic goals. Cost Consciousness - Works within the direction of the department's resources; Contributes to profits and revenue; Conserves organizational resources. Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Supervisory Responsibilities: This position has no supervisory responsibility. May assist in the coaching and process teaching of trainees or less experience personnel under the supervision of management. ESSENTIAL JOB REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience High School diploma or General Education Degree (GED); certification in mechanical, electrical, or industrial maintenance or general construction trades required or equivalent work experience Minimum of 5 years of related manufacturing experience or general construction trades and/or training; advanced hydraulic, pneumatic, mechanical and industrial skills with PLC. Industrial electrical experience in a manufacturing environment. Ability to read, interpret manufacturers drawings, blueprints and written instructions. Familiarity with Lock-out/Tag-out procedures. SKILLS AND ABILITIES Computer Skills To perform this job successfully, an individual should have ability top learn CMMS, Excel, SolidWorks. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to read and interpret documents such as safety rules, operating and maintenance instructions. Ability to speak and present information in one-on-one situations to other employees of the organization. Mathematical Skills Ability to add, subtract, multiply and divides in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, licenses, registrations Evidence of “US person” is required under ITAR Fork-lift certified Hazwoper certified Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must frequently lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Hearing level within normal/average range. ENVIRONMENT, HEALTH AND SAFETY The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate. The responsibilities of the position include compliance with company and governmental safety, environmental and hazardous materials regulations and procedures. The employee will be required to wear Personal Protective Equipment in specified areas. Participate in the development and promotion of the HSE culture, be exemplary in terms of health, safety and the environment, in particular by : - Respecting and ensuring respect for the instructions and rules established in the field of health, safety and the environment (in particular the LISI golden rules) - Immediately correcting, whenever possible, or reporting to his or her superiors and/or the HSE department, any malfunction or risky situation in the fields of health, safety and environmental protection - Implementing preventive actions to reduce the environmental footprint and control health and safety risks - Participate, upon request, in analyses (of risks, incidents) and HSE working groups related to his/her professional scope - Be familiar with the main health and safety risks and the main environmental impacts relating to the scope of his/her work - Be familiar with the site's HSE policy and objectives - To be able to make proposals for improving working conditions and limiting environmental impact

Title: Engineering Technician Duration: Permanent Rate Range: $28.00 - $33.00 (based on education and experience) Fabricating, testing, troubleshooting, and repair of Engineering Units and Equipment. Primary Responsibilities * Responsible for fabricating Engineering units, and equipment, including Printed Circuit Boards (PCB), harnesses and mechanical assemblies. * Responsible for testing, troubleshooting, and repair of printed circuit boards and electronic and electro-mechanical assemblies. * Set up and operate test equipment per procedures. * Oversee and support qualification tests (vibration, thermal, EMI/EMC). * Maintain safe shop practices and procedures. * Organize and maintain Engineering inventory. * Manage test equipment and calibration * Maintains positive working relationships with other departments * Troubleshoots problems as they occur * Trains personnel as necessary * Perform repairs to IPC standards * Participates and generates cost savings and continuous improvement activities * Perform 5S Activities. Basic Qualifications * A.S. degree in electronics or an appropriate technical curriculum. * Minimum three years related experience working directly with Engineers * Ability to read assembly drawings and schematics * Soldering SMD and through hole to JSTD-001 * Ability to operate various pieces of test equipment * Can look beyond the obvious when troubleshooting * Familiar with safely working with 270VDC, 115/208VAC, 440VAC * Organize and team player Preferred Qualifications * Computer literate, with ability to use Engineering software tools Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Job Description We are seeking a Ford Certified Gas Engine Service Technician to join our team. The role of the Gas Engine Service Technician is to perform diagnosis, repairs and maintenance on all Gas engine vehicles in a fast-paced environment. Successful candidates should be motivated and enthusiastic about learning. By working at Red River Ford Cabot, you can be a part of a brand that honors the past, and is invested in the future. Join the Red River Family where we value service to each other and the world as much as to our customers! Gas Engine Service Technician Benefits: Competitive compensation plan dependent on experience Health and Medical Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Flexible Work Schedule Member of Ford Top Techs+ Gas Engine Service Technician Responsibilities Provide technical service to vehicles and equipment Read job order, observe and listen to vehicle in operation to resolve malfunction, and plan work procedures Follow checklists ensuring all critical parts are examined Examine protective guards, loose bolts, and specified safety devices on trucks, and adjust as needed Test-drive vehicles to ensure that they run smoothly Tag all warranty parts and returns to warranty clerk Attend training classes and keep tabs on factory technical bulletins Develop and maintain positive relationships with customers to increase overall customer happiness Properly complete the service and/or repairs assigned by supervisor Complete all work according to the applicable safety requirements and published procedures Participate in, and utilize to the best of one's abilities, technical training as assigned by management Maintain your designated workspace in an organized and clean manner Ensure guest vehicles are returned as clean as they were prior to being serviced Show the utmost courtesy to all guests, visitors, and dealership personnel Make every effort to achieve the production objectives set by management Adhere to manufacturer's policies and procedures as they relate to labor operations, time, and repair order documentation when performing warranty repairs and torque specifications Any other duties as outlined by the Service Supervisor and or management Gas Engine Service Technician Qualifications 2+ years of Service Technician experience preferred Gasoline engine drivability and repair experience High school diploma or equivalent Ford Certification Previous experience at a Ford dealership is preferred Dexterity, requiring a steady hand, excellent hand-eye coordination Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment Excellent customer service skills and basic computer competencies Positive, friendly attitude, along with an eagerness to improve Enjoy working in a dynamic environment Teammate with ability to collaborate with others effectively Ability to learn new technology, repair and service procedures and specifications Valid driver's license and clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Overview At MasTec Communications Group we build for the future. Yours and ours. As a Radio Technician I, you will develop new skills, work in a safety-minded environment, and join us in expanding technology for a better community. Join the MasTec family and help us provide the highest level of quality service to our customers and communities while maintaining our commitment to safety! Responsibilities As a Radio Technician I, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and an advanced understanding of applications related to transport Qualifications About You: Safety is a part of your day-to-day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum of 6 months of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills: verbal, written, and presentation Possess Excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits, including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company's motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; you exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have a strong attention to detail Compensation of $22-$25 per hour, depending on the experience. Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers About You: Safety is a part of your day-to-day You have a track record of completing work with a high level of quality You have a knack for figuring out hard problems and enjoy a hands-on approach to your work You are looking for long-term projects You enjoy getting your hands dirty with your team You have a minimum of 6 months of wireless telecommunications or other related experience You have a two-year vocational degree in a technical discipline, or a Military equivalent is preferred You must be able to read and interpret site plans, construction drawings, and SOW You have solid communication skills: verbal, written, and presentation Possess Excel and Microsoft Office proficiency You have operational knowledge and theory of all interconnecting circuits, including but not limited to T1, T3, and microwave radio You must possess a valid driver's license and comply with the company's motor vehicle policy You understand basic RF Engineering, Radio Frequency theory, and Electricity and Electronics Theory You accept and provide constructive feedback You have flexibility with ever-changing environments and priorities You can solve problems using creativity and innovation You are self-motivated; you exhibit initiative in achieving company goals and objectives You have basic leadership skills and the ability to prioritize and complete multiple tasks You are able to work independently or in a team environment You have a strong attention to detail Compensation of $22-$25 per hour, depending on the experience. Hard work pays off. See what you'll get for your effort: Financial Security 401(k) with company match Employee Stock Purchase Plan (ESPP) Life insurance Short-term and Long-term disability Red Wing Boot Voucher Health and Wellness Medical, dental, and vision insurance Dependent care and medical flexible spending accounts Employee Assistance Program (EAP) Work/Life Balance Paid time off Paid holidays Family and medical leave Paid sick time Employee Referral Program Refer someone who delivers excellence just like you and receive a $1,000 incentive for a referral that becomes a permanent hire! We meet your commitment with competitive pay and benefits. If this sounds like you, let's talk. Build your career with MasTec! MasTec, Inc. is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. #MasTecJobs #MasTecCareers #BeSuccessfulWithUs #IAmMasTec #WeAreMasTec #MasTecFamily #MasTecCommunicationsGroup #MasTecCommunicationsCareers As a Radio Technician I, you are responsible for staying current in technical theory, application, and operational discipline. Takes on technical and project-related efforts, providing communication as directed. You believe in doing the job right. Being the best. And you're up for the challenge. In addition, you will: Support key projects, providing day-to-day updates to Senior Technicians and managers as directed Collaborate with team members, actively participating in discussions toward achieving results Support the team by contributing 100% as an individual, while prioritizing team success Heavily scrutinize actions to ensure the customer experience is protected to the greatest extent feasible Quickly adapt to change, seeking to understand the whole picture to best adapt Possess a solid understanding of theory and application related to RAN Openly share ideas to help gain efficiency, solve problems, or add value to the business Demonstrate a continuous desire to learn and develop personally and professionally Have a solid understanding of theory and an advanced understanding of applications related to transport