Electronics technician jobs in Saint Louis, MO

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Job Description Perform routine maintenance and repair on gaming machines, equipment, and hardware under supervision and continued on-the-job training. Perform common floor calls without supervision and works towards competency and proficiency. Perform immediate, periodic, and overhaul maintenance on gaming machines, equipment, and hardware. Repair and diagnose machine faults. Isolate electronic faults at board level and refer to senior level slot technician. Read, understand, and accurately apply information contained within repair manuals and other equipment-related materials. Carry and effectively communicate by two-way radio. Maintain a working knowledge of new slot products/equipment. Qualifications Must be at least 21 years of age. Must possess a thorough knowledge of the mechanics, electronics, and electrical functions of gaming machines. One (1) year of experience in slots or a related field or graduate from slot repair school or similar course of study strongly preferred. Must be able to work with various hand tools and power tools. Must be able to stand and walk for duration of shift. Must be able to stoop over, kneel, and crouch while repairing gaming machines. Must be able to push and pull machines and maneuver weights up to 80 pounds. Must be able to obtain/maintain any necessary licenses and/or certifications. Additional Information All your information will be kept confidential according to EEO guidelines. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Job Description MTI Distributing, Inc., a subsidiary of The Toro Company, is the Upper Midwest's leading supplier of products and services to the green industries. Through a combination of exceptional products and superior service, MTI is in the business of providing landscape beautification solutions to golf courses, schools, municipalities, landscape contractors, and independent dealers. We currently have an opening for a Turf Equipment Technician in our Berkeley, Missouri location. The successful candidate will be an outstanding mechanic with above average diagnostic, hydraulic, electrical and mechanical skills. The position is full-time, Monday - Friday, 1st shift. Essential Duties and Responsibilities Set up equipment per manufacturer and customer specifications. Install necessary parts, check fluid levels, test and assure proper operation. Operate and test equipment to ensure quality standards are met. Safely and effectively use all service and repair tools: hoist, welder, test equipment, pressure washer, compressors, power tools etc. Safely operate a forklift. Maintain cleanliness and safety of shop area. Effectively work within a team to meet customer needs MTI provides specialized tools specific to our products, however the successful candidate provides his/her own hand and power tools. Education and/or Experience Technical degree (2yr.) or equivalent experience required. Demonstrated experience and effectiveness in diagnosing problems with gas and diesel engines, hydraulics and electrical systems. Computer Skills: Microsoft Office, Parts based lookup tools, Diagnostic Software Must be able to lift, push, and pull up to 75 pounds. Strong customer service/communication skills. MTI offers a wage of $28 - $35 per hour; based upon the qualifications of the selected candidate. Our benefit program includes: 401(k), medical, dental, vision disability and life insurance, PTO and holiday pay. Candidates will be subject to pre-employment background check, drug screen, and physical. We are proud to be an Equal Opportunity Employer including protected veterans and individuals with disabilities. Powered by JazzHR ut H9WsPBXX

Job DescriptionDescription: The Electronics Technician will work in our Production Department. RESPONSIBILTIES: · Troubleshoot and test electronic circuit board assemblies down to the component level. · Evaluate circuit boards to industry standard criteria and rework to meet said standard · Perform Testing/Assembly work as needed. · Maintain and record repair information in Microsoft Excel Requirements: REQUIRED SKILLS: · Experience working in electronics manufacturing or technical schooling. · Ability to use various tools including soldering irons, hot-air guns, de-soldering equipment, digital multimeters, etc. · Experience with soldering, including through-hole parts and SMD components · Understand how to follow and employ troubleshooting methodology. · Able to work independently and prioritize based on manufacturing needs Beneficial Skills · Experience with IPC-A-610, IPC J-STD-001, or others · Experience reworking according to IPC-7711 / IPC-7721 is valued · Experience working according to other industry standards · Ability to read and understand Electrical schematics · Experience working with very small or complex SMD components such as BGA's, QFP's, 0603 and smaller discrete components, etc.

Job Description Join Our Team as a Skilled Technician! Are you ready to become an essential part of our food processing empire in St. Louis, MO? At TekPro, we're on the lookout for talented individuals to fill the role of Food Production Equipment Technician. This isn't just another job; it's your chance to shine in a direct-hire, full-time position with incredible benefits and a supportive environment! Your Role: Be the go-to expert for maintaining our plant utilities - from boilers to refrigeration compressors. Help keep our facility running smoothly by focusing on both routine and preventative maintenance. Adapt and learn through training on different shifts (2pm-11pm or 11:00 pm-8:00 am). Coordinate with various teams to minimize plant downtime and maximize efficiency. The Perks: Pay commensurate with your experience, ranging from $28.90 to $38 an hour. Weekly insurance coverage at outstanding rates: $9.90 for individuals, up to $60.80 for families. Comprehensive benefits including life insurance, paid time off, and more - plus belong to a community with Teamsters Local 600. A vibrant team culture that supports growth and knowledge sharing. Your Qualifications: Skilled in pneumatics, PLCs, and hydraulic systems. HVAC, ammonia, and electrical (480 volt) expertise preferred. Capable of lifting heavy equipment and solving mechanical puzzles efficiently. Proficient in mechanical and electrical troubleshooting, with a knack for machine safety inspections. Start with us and grow your career in a thriving, fast-paced environment. Ready for the challenge? Apply now! Background Requirements: ·Must be able to pass a post-offer drug test, alcohol screening, and physical exam

Job DescriptionSerioplast, a Global Leader in Rigid Plastic Packaging, is Looking for an Electrical Technician for the plants in St. Louis, Missouri! Are you an experienced technician looking for an exciting opportunity to thrive in a fast-paced, global environment? Join us and take your career to new heights! What will you do? Ensures production continuity through the correct maintenance of machines, equipment, and facilities in compliance with health and safety regulations and company standards and procedures. Carries out the electrical installation and setup of machines and equipment (compressors, air conditioning, driers, leak test, cameras, palletizers, etc.) Carries out regular inspections on machines, equipment, and facilities, checking relevant parameters and meter readings; detects and replaces worn-out parts, timely submits requests for necessary spare parts or supplier's technical support to the Technical Manager Performs preventive maintenance on machines and equipment according to the maintenance plan Performs emergency repairs in case of breakdowns, halts, or failures and ensures machines and equipment functionality is fully restored Supports during inspections, servicing, and maintenance activities by external suppliers Keeps records of maintenance activities to track the lifespan of equipment and spare parts Organizes and manages the workshop, repairs and fabricates mechanical and other parts using workshop tools and equipment Supports the Technical Manager in improvement projects and decisions on machines, equipment, molds, and processes What are we looking for? Excellent applied knowledge of mechanics, pneumatics, hydraulics, electrical, and/or electronic systems Good knowledge of plastic molding technologies (EBM and/or SBM and/or IM) Good applied knowledge of WCM standards Basic knowledge of Health, Safety, and Environment rules and practices Ability to operate manual and electric forklifts Minimum 3 years of experience in the maintenance department in a manufacturing company What do we offer? Continuous training: Grow professionally by working alongside industry experts. Dynamic and international environment: Join a team engaged in global projects. Career growth opportunities in an industry leading company. Internal mobility: Opportunities for job rotation and career progression Additional Perks & Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Paid time off Vision insurance Sounds like a fit? We'd love to hear from you! Want to know more about us? Check out Who We Are and discover what makes us unique! Upon sending their application, the candidate grants specific consent to the processing of personal data, in accordance with current legislation on privacy. The privacy policy is available at the following link: ******************************************************************* Serioplast is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. Powered by JazzHR IuUzZ7iDhG

About Us: At Intramotev, we are dedicated to revolutionizing the freight industry by liberating tons of freight from congested highways, reducing carbon emissions, and enhancing transportation efficiency. We are pioneering the future of rail transportation by deploying cutting-edge autonomous, battery-electric rail vehicles to transform freight logistics and bring innovation to our rail network. Based in St. Louis, MO, we are committed to promoting industrial revitalization, saving lives, and minimizing the environmental impact of transportation. Join us in shaping the next generation of rail technology, where tradition meets innovation to create faster, greener, and more efficient transportation solutions. Role Overview: We are seeking Electrical Technicians to bring our electrified freight rail cars to life. This role is critical to our collaborative Build & Integration team, with a strong hands-on technical focus. You will participate in multi-disciplinary efforts involving systems build, integration, and troubleshooting, as a key contributor to product deployment and support. Key Responsibilities: Electrical Build: Activities may include soldering, crimping, and component wiring and cable assembly per wiring diagrams, schematics, verbal instructions Systems Integration: Assembly of components into an integrated system, including pneumatics, hydraulics, drivetrains, high and low voltage power, cooling, sensors, and controls Problem-Solving: Operating, inspecting, troubleshooting, and repairing electrical equipment as needed to ensure successful system operations Lifecycle Support: Address and resolve issues related to fielded systems, providing comprehensive support throughout the product lifecycle Team Dynamics: Work within dynamic teams of 3-10 members on diverse projects Foster excellent interpersonal and communication skills to thrive in a collaborative environment Adapt to evolving build designs and operations, introduced through prioritized capability enhancements Engage in occasional domestic travel for integration, demonstrations, and customer interactions Why Join Us? Career Growth: Develop your career with a forward-thinking company dedicated to transforming rail technology Innovative Environment: Contribute to groundbreaking projects that bridge the past and future of rail transport Impactful Work: Be a key player in creating solutions that promote a more sustainable and efficient rail network About You: Basic Qualifications (Required Skills/Experience): Technical Associates Degree in applicable field, or equivalent experience Experience with basic electrical systems (e.g., starters, fuses, contacts, relays) Experience with electrical systems (installation, commissioning, troubleshooting) Able to perform occasional heavy lifting, pulling, pushing, stooping, climbing, reaching, bending and working in awkward positions Willingness to expand into technical areas beyond your area of expertise Open-minded and comfortable working in a team environment, as an individual contributor, and as a conscientious teammate Fluent in both written and verbal English Preferred Qualifications (Desired Skills/Experience): Experience in directly applicable industry or projects, such as Rail, Electric Vehicles, or Unmanned Systems Experience in motor control and variable frequency drives Able to troubleshoot and fix complex control systems and instrumentation Proficient soldering skills An understanding of ISO Quality systems, and adherence to ISO 9001:2015 Able to work within NEC guidelines Relocation: This position offers relocation based on candidate eligibility. Equal Opportunity Employer: Intramotev is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. If you're passionate about electrical build, integration, and problem-solving, and eager to lead the charge in autonomous rail technology, we'd love to hear from you!

Job Description When you work for a world leader that recognizes and rewards your best efforts, you can expect the best for your career. Explore the exceptional opportunities now available at Hydromat, Inc., the leader in precision transfer machine technology. We provide a state-of-the-art environment where challenge and growth go hand-in-hand. Hydromat strives for excellence to guarantee Total Customer Satisfaction. We are committed to gain the appreciation and respect of our customers, associates, suppliers, friends and community. As an industry leader and visionary, our conduct will always be of the highest credibility and ethical values. Our mission is to create innovative and unique manufacturing solutions that provide high quality and cost effective production capabilities for metalworking manufacturers. We emphasize continued after sales support in the form of engineering, parts inventory, training, and comprehensive customer service. DUTIES This professional will integrate control circuits for machine functions such as motor controls, sequence of operation, timers, limit switches, interlock and safety devices, sizing of fuses, overloads and wire, and panel layouts. Will also design logic and programming of GE Fanuc CNC and PLC controllers, Robot controllers, and Allen-Bradley PLC's. Travel to customer facilities for installation and trouble shooting - candidate must be able to travel 50% of the total work time. Must be able to work in a changing task environment daily. Must be self-motivated, work well in a team environment and capable of performing detailed assembly with quality craftsmanship mentality focused on detail. Strong experience with Servo drives and CNC controllers is required. Thorough understanding of the File Management - CNC Setting tool to establish hardware configuration. Safety oriented working with various power tools and motorized equipment in accordance to Hydromat and OSHA guidelines. QUALIFICATIONS Associate's degree (A. A.) in Industrial Electronics Technology or equivalent from two-year college or technical school; minimum two (2) years practical experience; or equivalent combination of education and experience (electronics field of machine tools). Job Posted by ApplicantPro

BUILD IT- Electrical Technicians are responsible for electrical assembly and interconnection of PRI systems during the assembly process. You will literally “build it” using your skill and knowledge of electrical assembly with minimal oversight. OWN IT- This is a critical role for the company; this position ensures proper operation of the system to make sure it works as designed and meets functional and customer driven specifications. KEY RESPONSIBILITIES & FUNCTIONS Install code compliant raceways, pull and terminate cables, and test control panels and instruments Work closely with Engineering, Project Management, plus all other departments in Manufacturing Ensure that electrical installations comply with Class 1 Division 1 & 2 locations and Intrinsically Safe electrical requirements per the National Electric Code Review electrical drawings and bill of materials required to assemble panels Install, pipe, and wire industrial control panels, piping interconnects, and cable raceways Cut openings, mount parts, drill/tap holes as needed Install all necessary cables and wires to their proper connections inside the enclosures and device end-point terminations Test and troubleshoot completed systems and make necessary corrections Record data and write reports to provide feedback to engineering on future design improvement ideas Maintain an organized, safe, and clean work area Understand the operation of all equipment to ensure proper assembly and operation Provide assistance to other areas of Manufacturing as needed Some travel to customer sites to support field service requests Requirements JOB REQUIREMENTS Certificate or equivalent education/experience in industrial controls or electrical automation technology; degree in Control Systems Technology, Electrical Technology or equivalent program preferred Demonstrated aptitude for working with electro-mechanical systems such as pumps, piping, pneumatics, PLC's, liquid level controls, etc.; Strong understanding of electrical schematics and PLC's. Demonstrated knowledge of PLC controls Previous experience with Safety procedures such as lockout/tagout, arc flash protection, and confined space entry Experience writing reports and reviewing project files Strong communication skills; ability to perform in pressure situations; ability to be flexible Able to work both independently with little supervision and as part of a team, all with a high degree of professionalism Maneuver heavy equipment, up to 50lbs of lifting required Hands on experience with fabrication and service of large process equipment Advanced understanding of process flow schematics, P&ID's, electrical and mechanical schematics. Safe operation of hand and power tools PHYSICAL REQUIREMENTS Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. Stooping: Bending body downward and forward by bending spine at the waist. Kneeling: Bending legs at knee to come to a rest on knee or knees. Crouching: Bending the body downward and forward by bending leg and spine. Reaching: Extending hand(s) and arm(s) in any direction. Standing: Remaining upright on the feet, particularly for sustained periods of time. Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to-position. Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward Pulling: Using upper extremities to exert force to draw, drag, haul or tug objects in a sustained motion. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

UtilliCo has an exciting opportunity for an Engineering Technician III based in our Midwest office. If your skills and experience are a match for the position described below, we'd love to hear from you. Base Education and Work Experience: Associate Degree with 4 or more years' experience; High School graduate with 8 years of experience in electric utility and/or related industrial drafting and/or computer aided drafting work and/or relevant experience with work history. Technical Knowledge Required: Exhibits journey level proficiency plus advanced knowledge that enables the designer to serve as a leader within the assigned organization. Keeps abreast of new products, developments, technologies, procedures, and equipment. Understands interrelationships between systems and component equipment. Interprets codes and standards and develops designs relevant to the area of assignment. Coordinates and assists in coordinating the work of other designers in an effective manner. Develops, reviews, or prepares drawings and designs on complex projects clearly, concisely, and effectively. Leads and facilitates meetings effectively. Decision Making and Problem Solving: Makes decisions affecting designs and drawings based on analysis of standards. Uses diverse approaches to make decisions in the absence of a definite framework or where few precedents exist. Can handle conflicting interests related to approaches on projects or studies. Analyzes options and risks and possesses the experience and knowledge to assess the risk of decisions and act accordingly. Identifies, clarifies, resolves, and initiates solutions to routine and/or complex problems that sometimes involve analysis of inadequate or conflicting data. Demonstrates the ability to divide problems into component steps. Consistently looks for and develops opportunities and presents new ideas and approaches. Leadership and Teamwork: Provides guidance and exercises judgement and discretion in providing guidance and direction to other Designers. Facilitates and coordinates work activities of others within the work group, team, department, or those external to the company as required to perform all routine design work. Ensures all work activities are performed in accordance with the policies, practices, standards, and rules of the company and complies with the regulations and procedures required by external agencies. Coordinates and conducts training sessions.

Mad City Windows & Baths, a Renuity Company Measure Technician Earn up to $70,000/yr The home improvement industry is broken. Renuity is here to fix it. We've united seven of the most trusted home renovation companies in America under one powerful brand - Renuity. Together we're on a mission to revolutionize home improvement, making it faster, easier, and stress-free to upgrade your home inside and out. Whether it's a new bath, a custom closet, or exterior upgrades, we help people create homes they love - without the hassle. With expert teams in 36 states and counting, there's probably a Renuity home in your neighborhood. And we're just getting started. If you're ready to build the future of home improvement, join us. What We Offer Competitive compensation between $50k-$70k/yr (base salary plus bonuses) Company provided vehicle & gas card Consistent schedules and professional growth opportunities Enjoy team collaboration and role advancement About the Role In this position, you will: Measure products (windows, baths, cabinets) for installation at customer homes Keep flow of reporting and documentation regarding customer project Professionally interact with homeowners to service their home-improvement needs Safely perform all aspects of job in compliance with all federal, state & local laws Key Qualifications Must have a valid Driver's License Ability to work Monday - Friday 9:00 am - 6:00 pm Minimum of 5 years remodeling experience required Must be comfortable driving a company vehicle most of the day to appointments Must be punctual and dependable Great customer service skills Able to use sound judgement; work independently with minimal supervision About Mad City Windows & Baths At Mad City Windows & Baths, a Renuity company, we're making home improvement faster, easier, and stress-free. Homeowners across the Midwest have trusted us for top-tier remodeling services, and now, as part of Renuity, we're combining our local expertise with the strength of a national brand to build the future of home improvement. With a winning mentality, we continue to grow rapidly, offering unparalleled career opportunities-100% of our current marketing leaders started in entry-level roles. As part of our team and the broader Renuity organization, you'll have the opportunity to make an impact, grow your career, and help people create homes they love. #ZR Renuity and its affiliates are committed to equal opportunity. We value and embrace diversity and inclusion of all Team Members. If you have a disability under the Americans with Disabilities Act or similar law, and you need an accommodation during the application process or to perform these job requirements, or if you need a religious accommodation, please contact ******************************. If you have a question regarding your application, please contact ****************** To access Renuity's Privacy Policy, please click here: Privacy Policy

Sunnen Products Company was founded in 1924 by Joseph Sunnen. For the last 100 years, we have been a global leader in the manufacturing and distribution of bore sizing and finishing equipment, engine rebuilding equipment, and tooling and abrasives. We are seeking results-driven candidates that are interested in working for a company with a long legacy and a bright future! As the leading global manufacturer of precision honing equipment and related accessories, Sunnen Products Company provides excellent employment opportunities for those in search of a challenging and rewarding career. We pride ourselves on our quality products, exceptional customer service and highly valued employees. Position Summary: Perform the duties required to set up, conduct and record data for testing. Essential Functions Debug and trouble shoot machine-operating software. Determine proper test for a specific tool or machine when test parameters are not provided. Choose proper tooling for honing and feed parameters and fixturing to properly run the test. Determine honing parameters including speeds, feeds pressures, stroke lengths, stroke rates. Hone test parts with prototype equipment to hold very close tolerances per requested engineer specifications. Verify part specification using micrometers, surface finish analyzing equipment, roundness checkers and a variety of precision measuring equipment. Collect an extensive amount of data that could be pertinent to the success or failure of a tool or a machine. Calculate honing ratio, volumetric stonewear, volumetric stock removal and stock removal rate. Prepare reports, graphs and draw conclusions from the data collected and relay information to the engineer in charge. Troubleshoot any unusual circumstances and report to proper engineer. Disassemble, clean, repair and reassemble machines, oil carts, tools, etc. Communicate with supervisors, engineers and fellow employees. Train personnel on existing and prototype equipment. Determine if customer complaints are valid with specific tools and machines; demonstrate tools or machinery to customers, fellow employees, board members and family members. Modify test and/or machine parts by using drill press, drill motors, mills and other shop equipment. Make recommendations to the appropriate engineer for changes in tooling and/or machines. Work with related departments to ascertain the proper information, tooling and machine changes, and special unconventional work. Move and set up prototype and standard type machines. Marginal Functions Use basic, entry-level electrical skills to connect, calibrate, and operate load cells, transducers, data acquisition systems, etc. Physical/Visual Activities or Demands: Physical/visual activities or demands that are commonly associated with the performance of the functions of this job. While performing the duties of this job, the employee is regularly required to sit, walk and talk or hear. The employee is occasionally required to reach with hands and arms. The employee must exert up to 10 pounds of force occasionally and/or a negligible amount of force frequently to lift, carry, push, pull, or otherwise move objects. Specific vision abilities required by this job include clarity of vision at 20 feet or more as well as 20 inches or less. Environmental/Atmospheric Conditions: Environmental and atmospheric conditions commonly associated with the performance of the functions of this job. Somewhat undesirable working conditions. Exposed to odor, noise, dust, heat, cold, chemicals and other elements with no element continuously present to the extent of being disagreeable. POSITION QUALIFICATION REQUIREMENTS Education: Requires a high school education or equivalent plus additional broad specialized training equal to two years of college. Experience: Requires 3 to 5 years experience to gain sufficient knowledge to fulfill the duties of the position. Skills and Abilities which may be representative but not all inclusive of those commonly associated with this position: Apply principles of logical thinking to define problem, collect data, establish facts and draw valid conclusions. Ability to interpret instructions furnished in written or oral form. Ability to effectively work and interact with others. Machines, Tools, Equipment and Work Aids which may be representative but not all inclusive of those commonly associated with this position: Typical office equipment: Telephone, copier, fax, printer, computer, typical Microsoft office software, etc. Sunnen Honing Equipment: Machines, Tools, Abrasives, Coolants, and Gages Basic QC equipment: Calipers, micrometers, dial indicators, microscopes, comparator, gage blocks/pins, and other precise measuring equipment Electrical equipment: Data acquisition, load cells, strip charts, voltmeters, linear transducers, etc. Typical, mechanical hand tools License(s)/Certification(s) Required: Fork truck certification, Arc Flash certification This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. Certain job functions described herein may be subject to possible modification in accordance with applicable state and federal laws. "Commonly associated" is not intended to mean always or only. There are different experiences that suggest other ways or circumstances where reasonable changes or accommodations are appropriate. All activities, Demands, Conditions and Requirements are linked to Essential Job Functions unless marked with an asterisk which denotes linkage only to marginal function(s). Sunnen offers a wide variety of benefits for our employees, such as: Competitive Insurance Coverage, eligible on the first of the month after hire date: Medical (PPO and High Deductible Plan with Employer HSA Contribution) Dental Vision Life and AD&D Accident Critical Illness Hospital Indemnity 401(k) Eligibility with Employer Match Company Paid Benefits: Group Life and AD&D Insurance Short Term Disability Long Term Disability Employee Assistance Program Competitive Vacation Policy Weekly onsite Nurse Practitioner and Chiropractor Tuition Reimbursement Paid Plant Closure Between Christmas and New Year's Day We require a background and SSN check, drug test, and physical for pre-employment.

Job DescriptionSalary: Based on Interest and Interview DME - Durable Medical Equipment - Service/Delivery Technician: Patients Choice Medical LLC provides the Indianapolis, IN Market's aging population with mobility products with an expertise in Complex Rehab PowerandComplex Manual Wheel Chairs. (DME - Durable Medial Equipment experience is aPLUS!) Our company is growing and we are looking for an individual to perform the duties of a Field Technician for the Indianapolis, IN area. This part-time position will start with warehouse duties and learn from the ground up. Your training will start in the warehouse and progress to the mastery of some of the most advanced power mobility products available. Requirements: Follow and adhere to all instructions given by Administration. Complete job assignments in a timely manner with little or no supervision. Work safely with hand tools and power equipment as required for assignments and understand the proper use of equipment. Familiarity with electric motors a plus along with initiative for troubleshooting. (ability to work tech service and basic schematics. Competent computer skills and basic knowledge of MS office software. Must be professional, punctual, reliable and clean cut. Able to speak well and comfortable interacting with the elderly. Receive, un-crate, assemble and dispose of crate material according to safety standards. Notify administration of any discrepancies in equipment or documentation prior to delivering to patient. Verifiable employment references. --Clean driving record / valid drivers license Compensation: Pay is based on experience - Interest Level and Your Interview Experience Paid Holidays - Based on becoming Full-Time 2 weeks a year paid vacation - Based becoming Full-Time Health/Dental/Vision/Flex Spending - Based on becoming Full-Time 401k availability - Based on becoming Full-Time

Job Details SNP St Charles - St Charles, MO Full Time High School Negligible DayDescription Responsibilities This position will perform diagnostics, service repairs and maintenance work on customer and/or dealer-owned compact construction equipment. Repairs will take place in shop and in field with direction from the CCE Mobile Service Manager. Primary Responsibilities: Diagnose and repair compact construction equipment, with emphasis on hydraulic, electrical, and powertrain systems Ensure all documentation is completed accurately and efficiently; service reports, allocation of time, and tracking parts charged and returned Maintains customer satisfaction by ensuring customer needs and deadlines are met Complete all scheduled repairs in a safe and efficient manner Ensure equipment and parts areas are in excellent, safe operating condition Adheres to all safety rules and maintains quality housekeeping in shop area Maintains equipment and supplies to avoid waste, prevent accidents, and damage to personnel and equipment Qualifications Qualifications Required: High School Diploma or GED 2 years or more of experience with Heavy Equipment or Compact Construction Equipment Preferred Associates in related technical field (Diesel Technology) 4 years or more experience with Heavy Equipment and Compact Construction Equipment The duties and responsibilities described here are not a comprehensive list, and the scope of the job may change as necessitated by business demands.

Join the 125-year legacy of Potter Electric Signal Co. Potter has been a part of the St. Louis community since 1898 and we are very proud of our rich history in the fire and life safety industry. Potter's mission is to be the "Symbol of Protection" for fire and life safety solutions worldwide by combining the latest technology in fire protection with the dedicated manpower for which we have been known for over one hundred years. Our vision is to provide industry leading quality solutions, products and services for the protection of life, property and the environment. With unwavering dedication to our customers, Potter looks to continue as the industry standard in both product and service with increased focus on international expansion. Each employee at Potter takes great pride in knowing that every product we assemble, service, and sell is for the purpose of saving lives around the world. We strive to provide employment opportunities to those individuals who are performance driven, team players, take pride in their work, and are enthusiastic and passionate about their job. Potter Global Technologies and our private equity firm, KKR, value our employees and all that they do. KKR offers a unique benefit and opportunity for all employees to participate in an ownership program of Potter Global Technologies. Being a co-owner allows each employee to play a more direct role in the business itself and reap the financial benefits of the Company's success. The R&D Department is seeking a candidate to aid in the support of all product development from concept through production. Looking for individuals who are performance-driven and dedicated to meeting the needs of the business, take pride in their work, and are team players who are enthusiastic and passionate about their jobs. Essential Functions Support Engineers in all hands-on product prototyping construction, testing, compliance samples and documentation. Focus on safely prototyping, assembling, and testing electronic assemblies. Confirm system and circuit assembly performance by conducting tests and recording results. Document tests through reports, charts and graphs using Microsoft Office products. Provide support for Mfg. pilot production runs of new products. Interface with QC, purchasing and suppliers for existing and new components. Read schematics, PCB layout, component datasheets, detailed instructions, drawings, bill of materials, and specifications for product fabrication. Work with lab equipment such as but not limited to soldering irons, power supplies, oscilloscopes, digital multimeters, hand tools, etc. Maintain an organized laboratory. Performs all other duties as assigned. Required Skills/Abilities Hands-on PCB assembly, soldering, prototype construction and testing. Troubleshooting electronic components, printed circuit assemblies, and hardware. Ability to work on many projects at various points of the product development cycle. Computer literacy in windows-based systems and Microsoft Excel/Word. Required Qualifications Associates/Technical Degree in Electrical Engineering Technology or equivalent in related experience, or equivalent experience in a similar role. A minimum of three years' experience. Preferred Qualifications Working experience using schematic capture and PCB design software (Ex: Altium). Experience in electrical/mechanical product test setup. Working knowledge of analog/digital circuit principles and embedded microprocessor controls. Working knowledge of power supply principles and circuits. Work Environment/Physical Demands/Travel This job operates in a warehouse/manufacturing setting where various tools and equipment are used. This role must be able to stand, bend, stoop, kneel and exhibit good visual acuity to perform daily tasks. All necessary personal protective equipment will be required. This is a full-time position. The hours of work are Monday through Friday, 40 hours per week. An occasional shift in hours may be necessary to accommodate project schedules. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of an employee for this job. Activities, duties and responsibilities may change at any time with or without notice.

Job Title Parks Equipment Technician Department Parks & Recreation Posting Date January 14, 2025 - Open Until Filled Salary $15.25/ hourly Status Seasonal/Part-time The City of Saint Charles Parks and Recreation Department is recruiting for seasonal/part-time Parks Equipment Technician. This position is part-time and is not scheduled to work more than 1,499 hours per year. Position serves as a part-time support for Parks Mechanic. Regular duties include providing light services to park vehicles and equipment including pickup trucks, law-enforcement vehicles, diesel and propane mowers, two-cycle engines, motorcycles, and trash trucks. Conduct regular preventative maintenance services and help support Parks Mechanic with on-going repairs and needs to keep parks equipment functioning and safe. All applicants must possess or be able to obtain by date of hire a valid driver's license. Must be 16 years of age. How to Apply: Online employment applications can be accessed on our City Website: *********************** The City of Saint Charles is an Equal Opportunity Employer and participates in e-verify

AdaptHealth Opportunity - Apply Today! At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives - out of the hospital and in their homes. We are actively recruiting in your area. If you are passionate about making a profound impact on the quality of patients' lives, please click to apply, we would love to hear from you. Medical Equipment Technician Medical Equipment Technicians are responsible for ensuring safe delivery, providing setup, and education in usage of home medical equipment for our customers. Setup is done in their home, long-term care setting, clinic or any location deemed necessary to service patients. Job Duties: Develop and maintain working knowledge of current HME products and services offered by the company and all applicable governmental regulations. Comply with all applicable company policies and procedures. Educate customers in proper use and care of respiratory and HME equipment in a home setting. Complete required documentation following equipment setup, delivery or pickups as required. Assist with customer equipment problems under emergency conditions. Process all orders in a timely, accurate manner. Promote services and products to referral sources in the community as appropriate. Develop basic reimbursement knowledge and completely document all information necessary to ensure reimbursement for all appropriate equipment, products, and services. Assist with implementation of quality improvement program to meet company policies. Maintain home oxygen systems through regularly scheduled visits to customers. Safely drive and maintain company vehicle. Perform patient assessment and re-assessment for patient care. Perform routine preventative maintenance and simple repairs on equipment as required in accordance with company policies. Report equipment hazards and/or product incidents as required in accordance with company policies and procedures. Develop and maintain working knowledge of current HME products and services offered by the company. Assume on-call responsibilities during non-business hours in accordance with company policy. Retain knowledge of and consistently adhere to procedures for the use of Personal Protective Equipment (PPE), infection control and hazardous materials handling. Maintain patient confidentiality and function within the guidelines of HIPAA. Completes assigned compliance training and other educational programs as required. Maintains compliant with AdaptHealth's Compliance Program Responsible for cleaning equipment when assigned by supervisor or down time allows, following the Branch Maintenance and Cleaning Guidelines Perform other related duties as assigned. Requirements Minimum Job Qualifications: High School Diploma or equivalency Entry level sales, customer service background essential One (1) year of Military, delivery driver with sales component or health care technician experience would be considered related experience and preferred. Senior level requires two (2) years of work-related experience and one (1) year of exact job experience. Valid and unrestricted driver's license in the state of residence Physical Demands and Work Environment: Must be able to regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Must be able to stretch, bend, stoop and crouch and perform moderate to heavy physical labor while moving equipment and supplies. Subject to long periods of sitting and driving. Work environment may be stressful at times, as overall work activities and work levels fluctuate. May be exposed to unsanitary conditions in some home settings. May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen. May be exposed to high crime areas within the service community. Must be able to drive independently and travel as needed. May be exposed to angry or irate customers. Must be able to access the patient's residence without assistance. Mental alertness to perform the essential functions of position. Ability to effectively communicate both verbally and written with customers with the ability to demonstrate empathy, compassion, courtesy, and respect for privacy. AdaptHealth is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individual's race, color, religion, creed, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other status protected by applicable law. This policy applies to all terms, conditions, and privileges of employment, including recruitment, hiring, placement, compensation, promotion, discipline, and termination.

Who We Are At Agiliti, we believe every interaction has the power to change a life. We are a nationwide company of passionate medical equipment management experts who proudly serve hospitals and healthcare facilities to ensure quality medical equipment is in the right place at the right time for effective patient care. We value our diversity and celebrate our differences, always seeking diverse backgrounds, ideas and experiences. Make an impact in healthcare and grow your career with Team Agiliti! The Medical Equipment Technician II provides cost-effective maintenance on company and customer-owned medical equipment to ensure it is functioning properly following manufacturer specifications. They perform operational verification, preventive maintenance, and corrective repair service under the guidance of a qualified Biomedical Equipment Technician or supervisor. What is in It for You? * The opportunity to learn about the Healthcare industry and make a real impact on patients' lives. * Comprehensive Benefits Package. * Tuition Reimbursement. * Up to a 3% match on your 401K. * Make any day a pay day with Daily Pay. What You Will Do in This Role * Conduct cost-effective equipment inspection, maintenance, calibration, and repair service on various medical devices including medical beds, infusion pumps, patient monitoring equipment, etc. * Complete all paperwork and computer data entry accurately and promptly to ensure complete documentation for billing and regulatory compliance. * Communicate with clinical staff on the topics of equipment features, functionality, etc. What You Will Need for This Role * High school diploma or equivalent required. * Proficiency in both movable medical equipment (MME) and patient handling equipment (PHE). * Basic computer skills; understanding of computer networks and equipment interaction. * Must hold a current, valid, and unrestricted driver's license. Must have a safe driving record based on Agiliti policies. * Demonstrated understanding of the requirements for servicing medical devices. * Willingness to work flexible hours, including evenings, weekends, and holidays, as well as emergency off-hours as needed to support a 24/7 schedule. * Willingness to travel periodically to support business needs. * The ability to lift and/or push up to 75 pounds. * The ability to often bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit, stand and walk for extended periods of time. It is the policy of Agiliti to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender identity, sex, sexual orientation, national origin, age, physical or mental disability, genetic information, marital status, status as a veteran, military service, or any other characteristic protected by applicable federal, state, or local civil rights laws. In addition, Agiliti will provide reasonable accommodations for qualified individuals with disabilities. Agiliti strictly prohibits any form of retaliation against individuals who make good faith reports of alleged violations of this policy or who cooperate in Agiliti's investigation of such reports. Affirmative Action Policy Statements You may be required to obtain certain vaccinations, or provide proof of current vaccination status, based on customer and/or company requirements. If vaccination is required, Agiliti will provide specific directions and cover the expense at a participating clinic. Please note, this includes the COVID-19 vaccination. Agiliti offers a robust suite of benefits for regular, full-time, non-union employees including: health insurance options for Medical, Dental & Vision plans, Short- and Long-Term Disability plans, Flexible Spending Accounts, Health Savings Accounts, Life Insurance Options, Paid Time Off, 401K Saving Plan with employer match, Employee Discounts, Tuition Reimbursement, Daily Pay program, Employee Assistance Program, and wellness programs. Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law. If you require assistance with your application, please contact ****************************. Primary Job Location: St. Louis District Additional Locations (if applicable): Job Title: Medical Equipment Technician II Company: Agiliti Location City: Earth City Location State: Missouri

Job Details Hazelwood, MO Full Time 2 Year Degree $65000.00 - $70000.00 Salary/year None DayDescription Join Us as an Electrical Engineering Technician at Potter Global Technologies At Potter Global Technologies, we've been protecting lives around the world for over 125 years-and we're just getting started. We're a global leader in life safety solutions, committed to saving lives through innovative technology and trusted partnerships. Our vision is for our customers to know us globally as their innovative, easy-to-do-business-with, best-in-class life-safety product partner. And our mission? With a passion for creating safer environments worldwide, our mission is to provide our customers with a team of real people that connect them with reliable expertise in life safety applications. If you're inspired by purpose, energized by collaboration, and thrive in an environment of feedback, ownership, and experimentation-you'll feel at home here. As an Electrical Engineering Technician, you will support the development of cutting-edge products from concept through production. Our Quality Engineering team is looking for someone who thrives in a collaborative environment, enjoys working with lab equipment, and takes pride in upholding high standards. If you have strong technical skills, a quality-first mindset, and the drive to make a meaningful impact, we want to hear from you! What You'll Do Partner with Quality, Manufacturing Engineering, and Production teams to support product testing, compliance sampling, and documentation throughout the product lifecycle. Execute safe and efficient testing of electronic assemblies to ensure adherence to quality standards. Verify system and circuit functionality by conducting thorough performance tests and accurately documenting results. Create clear and detailed test reports, charts, and graphs using Microsoft Office tools to support data-driven decisions. Assist in pilot production runs by providing real-time technical support and ensuring product quality is upheld. Collaborate across departments to troubleshoot issues and drive continuous improvement. Interpret technical materials, such as schematics, PCB layouts, datasheets, drawings, and BOMs to ensure accurate product fabrication and validation. Operate essential lab and test equipment such as soldering irons, oscilloscopes, power supplies, multimeters, and hand tools with precision and care. Maintain a clean, organized, and safety-compliant work environment to support efficient workflows. Take initiative in additional tasks and responsibilities that contribute to quality assurance and cross-functional success. Qualifications What You Bring Experience That Drives Success Associate's/technical degree in electrical engineering technology or related, or equivalent experience in a similar role. 3+ years of relevant experience in an engineering environment. Hands-on experience with PCB testing, soldering, and possible assembly. Proven history of troubleshooting electronic components, printed circuit assemblies, and hardware. Prior experience using schematic capture and PCB design software (ex: Altium). Working knowledge of analog/digital circuit principles and embedded microprocessor controls. Understanding of power supply principles and circuits. Key Strengths & Skills Acts with integrity, professionalism, and confidentiality Strong verbal and written communication skills Proactive time management and ability to work on many projects at various points of the product development cycle. Bias for action and ability to work with a sense of urgency Collaboration skills Proficiency in Microsoft Office Suite Our Culture We build strong relationships-with teammates, partners, and customers We take pride in knowing every product we build serves the purpose of protecting lives We listen actively, coach frequently, and own our results We foster innovation, value curiosity, and believe that experimentation is part of growth We create a welcoming and inclusive space where everyone belongs We take ownership of our work-quality and safety are at the core of what we do Benefits That Matter Employee Ownership Program - You're not just an employee-you're an owner. We share success together. Competitive health, dental, and vision plans 401(k) with company match Generous paid time off and holidays Continuous learning and development opportunities Financial Wellness programs including complimentary Certified Financial Planner sessions Recognition programs that celebrate individual and team wins A mission-driven team that supports life-saving outcomes, every day Location This is a full-time position, on-site at our Hazelwood, MO manufacturing facility. The expected schedule is 40 hours per week, Monday through Friday, though an occasional shift in hours may be needed to accommodate project schedules. Ready to Apply? Ready to make a real impact? If you're driven, curious, and excited to grow with a team that's changing the world-and where you're not just an employee but an owner-we want you on board! Join us, and let's create safer environments together-making a global difference you'll be proud to own.

Job Description Primary Responsibility: Ensures operation of machinery and mechanical equipment on motors, pneumatic tools, conveyors, hydraulic systems and production machines. Ensures all necessary parts are ordered and provides technical expertise to other departments and locations. Duties and Responsibilities: Troubleshoot and repair CNC machines and process equipment. Familiar with CNC programming and controls. Help design and build in house machines. Retrofit machines to improve production efficiency. Find alternative replacements for obsolete, hard to find, or costly parts. Help in troubleshooting mechanical repairs. Programming PLC, Temperature controllers, and other devices. Calibrate process loops like temperature, amps, volts etc… Tune servo controls on CNC equipment. Ensure part inventories are maintained. Provide technical help to maintenance as necessary. Provide technical help and support to other sites with troubleshooting, repairs, and parts. Maintain stock on electronic parts for machines. Troubleshoot down to component level on circuit boards. Help in repair of HVAC equipment. Ensures employees and processes operate in an environmentally responsible manner. Promotes waste minimization, energy conservation, and other efforts to meet environmental objectives. Familiar with ISO 9001 and ISO 14001 standards. Other duties as assigned to meet departmental and company objectives. Minimum Qualifications Knowledge/Skills/Abilities Safe work practices in an industrial environment. Strong working knowledge of multimeters, oscilloscope and other electronic testers. Ability to handle multiple tasks and prioritize effectively. Proficient skill level simple mathematics Ability to work with supervision to realize company goals. Perform work with attention to detail. Ability to acquire passport and travel to international and domestic sites (Estimate - 10%) Education/Experience 5+ years in electronics or related field Electrical or electronics engineering degree is strongly preferred. In lieu of degree, candidates possessing eight (8) or more years of relevant CNC electrical experience will be considered. Proven machining experience or work in a heavy CNC manufacturing environment. Physical requirements Ability to walk and stand for long periods of time. Ability to use ladder and climb stairs. Ability to be work from heights. Ability to exert average physical effort, occasionally lifting materials and parts up to 50 lbs. #IND Maxcess is an equal employment opportunity employer. We do not discriminate on the basis of race, religion, sex, disability, age, pregnancy, national origin, sexual orientation, or any other characteristic protected by applicable law. We are committed to diversity and inclusion, and all qualified candidates are encouraged to apply.