Electronics technician jobs in San Marcos, TX - 556 jobs

Employment Type: Full-time / Permanent / Direct Hire Compensation: Up to $35/hour (equivalent to ~$72k annually, assuming no overtime) Schedule: 7:00 AM - 4:00 PM, Monday-Friday (some overtime available) Benefits: medical, dental, vision, LTD/STD, HSA/FSA, term life, and supplemental health insurances (e.g., Aflac) for all employees (and their families if needed) 6 weeks PTO 401(k) paid parental leave We're looking for a Electro Mechanical Technician to join our growing team in Cedar Park, Texas. This role is ideal for someone who thrives in a precision-driven, process-focused environment and enjoys hands-on electromechanical work. If you have experience assembling motors, stators, coils, or other high-reliability electrical/mechanical systems-and you take pride in meticulous workmanship-this could be an excellent fit. In this position, you'll perform detailed assembly, testing, and inspection of electric motor components used in next-generation power and motion systems. You'll work with stators, windings, insulation systems, wiring, and precision mechanical fixtures while following strict work instructions and quality standards. Candidates from aerospace, EV powertrain, electronics, semiconductor, circuit boards, and other high-precision manufacturing environments are strongly encouraged to apply. Requirements 3+ years of hands-on experience in electromechanical assembly, motor/coil winding, aerospace electronics, EV powertrain, semiconductor, PCB assembly, or other precision manufacturing environments. Experience performing mechanical and electrical assembly tasks such as crimping, wiring, soldering, torque tools, epoxy/potting, and use of precision fixtures. Experience with electrical testing, such as continuity, resistance, insulation checks, or hipot testing (training provided). Ability to read and follow engineering drawings, schematics, work instructions, and revision-controlled travelers/SOPs. Strong attention to detail and process discipline-must consistently follow standardized procedures without deviation. Ability to accurately record build and test data for traceability and quality assurance. Proven reliability, consistency, and strong work ethic due to the complexity and safety requirements of the products. High school diploma or equivalent. Successful completion of a background check and drug test is required. Nice-to-Haves Experience with motor, generator, actuator, or electric machine assembly. IPC-A-610 or IPC-WHMA-620 experience or certification. Experience in pilot-line or R&D environments supporting early-stage manufacturing. Familiarity with MES systems or digital travelers. Exposure to Lean/5S principles, ESD practices, or continuous improvement environments. Prior collaboration with engineering, quality, or test teams for build feedback and process refinement.

The Silkscreen Technician is responsible for setting up, operating, and maintaining screen printing equipment to produce high quality printed graphics on a variety of substrates (metal, fiberglass, carbon fiber, etc.). The role blends technical skill, attention to detail, and an eye for color and registration to ensure each run meets customer specifications, quality standards, and production schedules. Key Responsibilities Pre-Production & Setup • Review job orders, artwork files, and client specifications (colors, size, placement, substrate). • Prepare screens: coat with emulsion, expose using UV light, wash out images, and inspect for pinholes. • Select and stretch appropriate mesh count for each job. • Register screens accurately using registration marks or alignment tools. Ink & Material Management • Mix custom inks to match client-specified colors, maintaining consistent viscosity. • Store inks, solvents, and cleaning chemicals safely and label them per OSHA/site standards. • Track inventory of screens, squeegees, substrates, and consumables; request re-orders as needed. Printing Operations • Load substrates onto the press (manual). • Adjust squeegee pressure, angle, and speed for optimal ink transfer. • Perform multi-color prints, ensuring precise registration for each pass. • Conduct test prints, make adjustments, and obtain approval before full run. Quality Control • Inspect prints for color fidelity, registration, ink density, and defects (smudges, streaks, ghosting). Post-Production • Cure or dry prints using ovens or air-dry methods as required. • Clean screens, squeegees, and press components after each job. Safety & Housekeeping • Follow all safety protocols (PPE, ventilation, proper chemical handling). • Maintain a clean, organized work area; dispose of waste according to environmental regulations. Skills Required Technical Skills • Proficient in screen preparation (emulsion coating, exposure, washing). • Ability to mix and match epoxy inks (solvent-based). • Knowledge of color theory and registration techniques. • 1-3?years of hands-on screen-printing experience (commercial, apparel, or fine-art). • Familiarity with manual screen-printing presses is preferred. Experience Required • 1-3?years of hands-on screen-printing experience (commercial, apparel, or fine-art). • Familiarity with manual screen-printing presses is preferred. Technical Skills • Proficient in screen preparation (emulsion coating, exposure, washing). • Ability to mix and match epoxy inks (solvent-based). • Knowledge of color theory and registration techniques. Physical Requirements • Ability to stand for long periods, lift up to 50?lb, and perform repetitive motions. • Good hand-eye coordination and visual acuity for detailed inspection. • No known sensitivity or allergy to thinners, solvents, or epoxy-ink fumes. Software • Basic proficiency with graphic-design file formats (AI, EPS, PDF) and RIP software is advantageous. • Basic proficiency with MS office suite (Outlook, Word, Excel) is required. Safety Awareness • Understanding of OSHA regulations, MSDS, and proper PPE usage. Education Required • High school diploma or GED required. • Associate's degree or certification in graphic arts, printing technology, or related field is a plus.

TEKsystems is partnering with a top client that has emerged as the largest complex systems integrator in Canada. As a leader in the design, deployment, optimization, management, and maintenance of IP-based Integrated Security, Audio-Visual and Data Networking systems, our client can meet the needs of clients on a national scale, while providing local support. Our client is seeking to hire a Team Lead Technician in the Austin, TX area. *Description* * The Lead needs to be able to get the techs lined up on duties for the day, submit daily reports and coordinate with the managers. * Technicians will be Pre-wiring and installing security systems, including access control, CCTV and intrusion alarms. * Need to work with other techs and Project Managers by completing and filing all project documentation and working together. * Technicians will be working on a variety of commercial installations including, hospitals, airports, corporate offices * Install, test, troubleshoot, repair, and maintain all Security systems at customer sites. * Installation will include, but not limited to: Video Surveillance systems, IP and Analog cameras, wireless, Access Control panels, Intrusion Panels, magnetic locks, card readers, motion sensors, door contacts, electric door strikes, etc. * Perform assigned projects within scope, in a timely manner, and on budget. * Provide customers with system operation and training. * Excellent attention to detail including maintaining concise daily records and following of operational standards and practices. *Additional Information* * Salary/Pay based upon previous relevant industry experience * Need to pass pre-onboarding compliance * W2 contract to hire * Local travel will be required *Job Type & Location* This is a Contract to Hire position based out of Austin, TX. *Pay and Benefits*The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Austin,TX. *Application Deadline*This position is anticipated to close on Jan 28, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

advertised has been exempted from the federal civilian hiring freeze. At the FBI, we don't just hire talent-we build it from the ground up. We employ individuals who are not only ready to enhance their electronics proficiency but also looking to contribute effectively to their teams. The electronics technician role is crucial. You'll be responsible for diagnosing and resolving issues, setting up new systems, making improvements, and ensuring the proper functioning of intricate electronic systems. Your expertise extends to a wide range of interconnected subsystems, such as electronic warfare technologies, network systems, locks, alarms, and surveillance equipment deployed in various settings, including offices and vehicles. When urgent investigations demand immediate assistance, electronics technicians are there to provide their invaluable support to special agents. You excel at troubleshooting, using your problem-solving abilities to conduct maintenance and repairs and operate a variety of test equipment, both standard and specialized. From installation to maintenance and operational testing, you are adept at every phase, always striving to outpace emerging threats by pushing the boundaries of your skills in technology and network optimization. With the FBI's specialized training and professional development courses, working at the Bureau will help you become more efficient, improve your skill set, and advance your career -all while making a significant impact on national security. Set yourself apart. Apply today. HOW TO APPLY STEP 1: Click on the “Apply” button to be directed to the FBIJobs Careers website. STEP 2: Click the “Start” button to begin. You will be prompted to either sign in to continue or register with FBIJobs if you don't already have an account. STEP 3: Follow the step-by-step process to submit your interest. You will be guided through each step. You must complete all sections of the form AND ALL REQUIRED DOCUMENTS MUST BE ATTACHED to successfully submit your interest. Your resume, specifically noting relevant work experience and associated start and end dates. Other supporting documents: College transcripts, if qualifying based on education or if there is a positive education requirement. Veterans: DD 214; Disabled Veterans: DD 214, SF-15, and VA letter dated 1991 or later. Please see instructions on the site for attaching documents. SALARY LEVEL Pay level for this position: GS 7-9: $42,679.00-$67,865.00 Salary shown is the base salary for the grade levels. Salary is also commensurate with professional experience. MAJOR DUTIES Perform installation, maintenance, and operational testing required to maintain the Bureau's communication and intrusion systems in optimal condition. Perform maintenance and service functions required to obtain optimal operational capability of a wide variety of complex equipment incorporated into FM radio, radio teletype, secure telephone, data and teletype, and intrusion systems. Use test equipment and advanced techniques to perform installation, maintenance, and repair tasks as well as operational testing of the FM radio system (base stations, repeaters, remote and mobile transmitters/receivers, and personal equipment). Conduct preventive maintenance by regularly inspecting and testing equipment for reliability and accuracy to prevent breakdown. Perform corrective maintenance to restore systems that are out of operating condition through extensive analytical testing and take positive action to replace or repair deficient or malfunctioning components and units. Review pertinent technical manuals, remain current with technology, and be available to attend government-sponsored training classes. SPECIALIZED EXPERIENCE GS-7: Applicant must possess at least one year of specialized experience (SE) equivalent to the GS-5 grade level. SE is defined as follows: Assisted with the physical installation and maintenance of electronic communication systems. Conducted routine equipment tests; performed basic corrections and/or replacing defective parts. Handled, stored, and inventoried a variety of electronic equipment and components. GS-9: Applicant must possess at least one year of specialized experience (SE) equivalent to the GS-7 grade level. SE is defined as follows: In addition to the above: Performed physical installation, maintenance, and troubleshooting of electronic communication systems. Performed installations and preventive and corrective (or emergency) maintenance and service work on FM radio systems, data networks, or electronic physical security systems. Inspected equipment for adherence to standards and tolerances. KEY REQUIREMENTS Must be a U.S. citizen. Must have (or be able to obtain) a valid driver's license. Must be able to obtain a Top Secret Sensitive Compartmented Information (SCI) Clearance. Must be willing to travel as required. Must meet the FBI's Employment Eligibility requirements. EDUCATION AND EXPERIENTIAL REQUIREMENTS EDUCATION Candidates must have a bachelor's degree or higher from a U.S. accredited college or university in one of the following fields: Electronics Engineering, Electrical Engineering, Electronics Engineering Technology, Electronics Technology, Networking, Telecommunications, or Computer Science. Education may be substituted for specialized experience (SE) as follows: GS-7: Applicant must have a bachelor's degree with superior academic achievement or one full year of graduate-level education. Superior academic achievement is the completion of all the requirements of a bachelor's degree from an accredited college or Electronics Technician, DC1 1/15/26 4 of 4 university, which is based on (1) class standing, (2) grade-point average of 3.0 or higher as recorded on an official transcript or as based on courses completed during the final two years of the curriculum, or (3) honor society membership. GS-9:Applicant must have a master's or equivalent graduate degree OR two full years of progressively higher-level graduate education leading to such a degree (or LLB or JD, if related). All degrees must be verified by submitting college transcripts. The FBI is an Equal Opportunity Employer, and all qualified applicants will receive consideration for this vacancy. Unless explicitly authorized by law, selection will be made without regard to, and there will be no discrimination because of, color, race, religion, national origin, marital status, parental status, physical or mental disability, genetic information, age (40 or over), sex, pregnancy and related conditions, or on the basis of personal favoritism, or any other non-merit factors.

Job Posting Start Date 01-14-2026 Job Posting End Date 03-30-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary Principle Accountabilities: Performs complex engineering tests, checkouts, and development engineering tasks. Analyzes engineering test results, and implements changes to resolve problems. Collects data, analyzes results and implements procedures. Reviews project instructions and blueprints to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem and possible solutions such as part redesign, substitution of material or parts or rearrangement of parts or subassemblies. Devises, fabricates and assembles new or modified mechanical components or assemblies for products such as industrial equipment and machinery, power equipment, server systems, machine tools and measuring instruments. Sets up and conducts tests of complete units and components under operational conditions to investigate design, or to obtain data for development, standardization, quality control and problem resolution Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives, and modifies or adjusts equipment to meet specifications. Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method. Maintains software, documentation and equipment to the latest revision or operational specifications. Assists engineers in developing and designing hardware and software required to test customer products per their specifications. Trains technicians and operators on products, processes and equipment. SPECIALIZED JOB RESPONSIBILITIES may be required for certain positions. These could include one or more of the following duties: Assist with the development and delivery of customer presentations and interface with customers. Partner with engineers on outside third party developments Organize documentation (specifications, schematics, and procedures). Perform tests per customer specifications and requirements. Education / Experience Typically requires an Associates degree, military training, equivalent vocational training, or equivalent experience. Typically requires 4 years of related experience. Knowledge / Skills / Abilities Has awareness of new technologies/ techniques. Demonstrates detailed functional knowledge and may lead process. Demonstrates advanced technical skills. Has awareness of Flex technologies/ techniques. Demonstrates basic functional and/or process knowledge and participates in process. Requires basic competency related to function. Demonstrates technical skills. Ability to write reports, business correspondence and procedures. Ability to effectively present information and respond to questions from managers and customers. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret an extensive variety of technical instructions. Certificates, Licenses, Registrations Technical high school degree Scope / Impact Moderate impact. May have influence on multiple programs or areas. Decision Making / Discretion Limited expectations to make decisions outside immediate work assignments. Decisions only affect individual. Supervision / Leadership Requires general instructions on routine assignments and detailed instructions on new assignments. Typically requires close supervision Work Environment: While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, work that requires repetitive motion, toxic or caustic chemicals and risk of electrical shock. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to handle small components, reach with hands and arms, stoop, kneel, crouch, crawl, talk and hear. The employee frequently is required to stand, walk and sit. The employee is occasionally required to climb or balance. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and depth perception. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Title: TechnicianJob Description Support the fabrication, assembly, and testing of avionics electronic systems. This includes the assembly and disassembly of line-replaceable units and circuit card assemblies. You will troubleshoot and repair circuit card assemblies, and operate test equipment such as digital multimeters (DMM), oscilloscopes, and Automatic Test Equipment (ATE). You must handle and test delicate and ESD-sensitive circuit card assemblies with care. Responsibilities * Fabricate, assemble, and test avionics electronic systems. * Assemble and disassemble line-replaceable units and circuit card assemblies. * Troubleshoot and repair circuit card assemblies. * Operate test equipment including DMM, oscilloscopes, and ATE. * Handle and test delicate and ESD-sensitive circuit card assemblies. Essential Skills * Experience with electronics, IPC standards, assembly, and wire harness assembly. * Knowledge of avionics PCBs, printed circuit boards, and Certified Interconnect Design (CID). * Proficiency in soldering, specifically on printed wiring assemblies and cable harnesses. * 2+ years of experience working on boards. * IPC certification. Additional Skills & Qualifications * High School diploma required. * Previous NASA certification or IPC-J-STD-001 training preferred. * Degree in Electronics Engineering Technology is preferred. * Experience with MIL-Spec and Mentor Graphics PADS is beneficial. Work Environment This role is based in a lab and desk setting. Job Type & Location This is a Contract position based out of San Antonio, TX. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in San Antonio,TX. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Full-time Description Work on state-of-the-art oven-controlled crystal oscillators and RF components. Support production testing using automated test equipment and various types of test equipment including multimeters, frequency counters, and spectrum analyzers. Broadly responsible for testing, troubleshooting, repairing and modifying electronic circuits according to engineering instructions and customer specifications. Document and certify testing to military standards using approved acceptance test procedures. Requirements ESSENTIAL FUNCTIONS Perform testing and modifications on product using approved procedures. Troubleshoot circuits to component level. Generate test reports. Perform regularly scheduled preventive maintenance on electronic equipment. Ensure product is moved through testing sequences in a timely manner to meet schedule demands. OTHER DUTIES AND RESPONSIBILITIES Performs other duties as assigned. QUALIFICATIONS FOR THE JOB Education: High School Diploma. Technical Degree in relevant field preferred. Experience: 2-5 years' experience in a manufacturing environment. Other: Must have strong written and verbal communication skills. Ability to work independently and as part of a team. Must be detail-oriented and possess knowledge of manufacturing procedures and practices. Working knowledge of basic electronic theory. KEY COMPETENCIES Organizational Skills Communication Proficiency Customer/Client Focus Time Management Collaboration Skills PHYSICAL REQUIREMENTS Ability to perform shop floor / production related activities. Sit and/or stand at workstation for extended periods of time. Lift and carry up to 35 pounds. EEO/VETS/W/DIS

Country: United States of America Hybrid U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: Secret - Current At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Senior Field Engineer with strong Network and electronics skills to perform network removal, installation, integration, test, and validation activities. You will support the Total Ship Computer Environment infra (TSCEi) team supporting the Zumwalt Total Ship Activation program. You will provide electronics expertise for ships at port undergoing network refresh. Overall program support involves integration, validation, and sell off for various defense systems on the Zumwalt program. In this role you will apply your experience and technical expertise in planning, integration, test, and activation of the following Ships Elements such as C4I System Segment (SC4I), Sensor System Segment (SSEN), Engagement Segment(SENG), Ships Control Systems (SCS), Total Ships Computing Environment (TSCEi), and Support System Segment (SSUP). Position Location: San Diego, CA What You Will Do Network installations and maintenance with knowledge of CISCO Systems (routers, switches, Call Administration servers. Software installations and maintenance with knowledge of Linux / Unix operating systems on RedHat7, as well as knowledge of Java / C / C++. Ship's External Communications System (EXCOMMs) and C4I installation, integration and troubleshooting. Initial responsibilities will include taking down old networks, pulling cables and racks out. Populate and depopulate Server racks. Upkeep and installation of the TSCEI (Total Ship Computing Environment Infrastructure) software aboard Zumwalt Class vessels. Work collaboratively with a team of highly skilled Software and Network Technician and Engineers. Perform equipment installation, checkout, testing, reporting of results, EXCOMMs, C4I, SW, HW and FW upgrades and maintaining records as needed. Provide regular internal status reports to the TSCEi Team. Provide support demonstrating system stage tests. Interact with the Shipbuilder, SUPSHIP, Ship's Force and outside vendors on TSCE issues and concerns. Perform normal climbing and lifting associated with shipboard electronic work. Accept temporary assignments that involve at-sea support aboard Zumwalt Class vessels. Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of prior relevant experience. Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Experience with software / network systems, hardware / software integration, or system activation and test, including hands-on experience working with electrical and computer systems design, integration, and test in either a lab or field setting. Experience with Naval Communications systems and C4I systems. Experience safely conduct testing and integration in a shipboard environment. Willingness to travel to various locations in support of ship maintenance availabilities. Qualifications We Prefer Demonstrated track record of completed integration events. Customer focus and collaboration skills. Demonstrated Multi-tasking skills - close out projects completely. Prior experience working with Military and Commercial Marine control systems. Experience with test procedure development and test conduct. Familiarity with Zumwalt Ship networks and equipment. Computer, Network and Fiber Optic Certifications. Information System Networks experience. Experience with Microsoft Office products. C4I and combat system test tools (hardware and software). Ability to perform work on board a naval vessel under construction and during trial periods at sea. Prior experience working in this environment would be an advantage. Interest in future work which may involve travel while providing support to ships under construction or underway for at sea events, a plus. Clearance Information: This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 95,500 USD - 181,700 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Throughout this Not-To-Exceed (NTE) assignment, Electronic Technician Trainees will build upon the experience they already have and be provided assignments to help prepare them to qualify for a permanent FBI Electronics Technician position. Successful trainees will obtain the experience needed to qualify for and be offered a permanent FBI Electronics Technician position. Unsuccessful trainees will be removed from FBI employment. Summary Throughout this Not-To-Exceed (NTE) assignment, Electronic Technician Trainees will build upon the experience they already have and be provided assignments to help prepare them to qualify for a permanent FBI Electronics Technician position. Successful trainees will obtain the experience needed to qualify for and be offered a permanent FBI Electronics Technician position. Unsuccessful trainees will be removed from FBI employment. Overview Help Accepting applications Open & closing dates 01/16/2026 to 01/30/2026 Salary $43,106 to - $56,039 per year Salaries listed above are the base rate of pay for the GS pay scale. Pay tables factoring in locality pay can be found at ************ Pay scale & grade GS 7 Locations Many vacancies in the following locations: Birmingham, AL Little Rock, AR Los Angeles, CA San Francisco, CA Show morefewer locations (6) New Haven, CT Boston, MA Minneapolis, MN Kansas City, MO Nashville, TN San Antonio, TX Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Temporary - NTE 2 years Work schedule Full-time Service Excepted Promotion potential 7 Job family (Series) * 0856 Electronics Technical Supervisory status No Security clearance Sensitive Compartmented Information Drug test Yes Financial disclosure Yes Bargaining unit status No Announcement number DESTIMP-12864090-26-VL Control number 854736500 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Federal employees - Competitive service Current federal employees whose agencies follow the U.S. Office of Personnel Management's hiring rules and pay scales. Federal employees - Excepted service Current federal employees whose agencies have their own hiring rules, pay scales and evaluation criteria. Internal to an agency Current federal employees of the hiring agency that posted the job announcement. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Veterans Veterans of the U.S. Armed Forces or a spouse, widow, widower or parent of a veteran, who may be eligible for derived preference Military spouses Military spouses of active duty service members or whose spouse is 100 percent disabled or died on active duty. Individuals with disabilities Individuals who are eligible under Schedule A. Clarification from the agency All U.S. Citizens. Duties Help * Perform simple, preventive and corrective maintenance on various items of equipment of the Bureau's communications and intrusion systems; test and replace defective components and perform preventive maintenance at predetermined intervals as recommended by manufacturers. * Assist higher grade technician(s) during installation, maintenance and removal of equipment and associated systems by performing basic test and maintenance checks developing skills necessary for performing advanced maintenance tasks. * Review pertinent technical manuals, remain current with technology, and be available to attend government sponsored training classes if offered to the trainee. * Make appropriate notation in equipment maintenance log regarding maintenance performed. * Take periodic inventory of radio parts and check results against a spare parts quota which is prepared by the senior technician in office. Requirements Help Conditions of employment * Must be a U.S. citizen. * Must have (or be able to obtain) a valid driver's license. * Must be able to obtain a Top Secret-SCI clearance. * Some travel may be required. Qualifications Applicants can qualify for the GS-7 level based on Specialized Experience (SE) or Education. There are four (4) methods by which candidates may meet the qualification requirements for the Electronics Technician Trainee GS-7 position: Method 1 - Education in Basic Electronics: To qualify based on education, you must have completed six (6) credit hours in basic electronics. Hours can be obtained in one or more of the following courses: * Electronics Fundamentals * Introduction to Electronics * Concepts of Direct Current * Concepts of Alternating Current * AC/DC Fundamentals * Electronic Circuits * Digital Electronics (Fundamentals) * Solid State Devices * Concepts of Solid State Electronics * Circuit Analysis * Applied Electronics * Microprocessors/Microcontrollers * Programmable Logic Controllers (PLCs) * Automatic Control Systems * Integrated Circuits * Controls and Automation * Analog Integrated Electronics * Power Semiconductor Electronics * Introduction to Embedded Systems All degrees must be from an accredited college or university. Education completed in foreign colleges or universities may be used to meet the above requirements provided you can show foreign education is comparable to that received in an accredited educational institution in the United States. Method 2 - Radio Experience: To qualify based on radio experience, you must have either one OR two years of SE as listed below: * One year of SE: SE must be with Motorola Radio in RF, Infrastructure Maintenance, Subscriber Devices, and/or Tactical Communications; or * Two years of SE: SE can be with any radio brand in RF, Infrastructure Maintenance, Subscriber Devices, and/or Tactical Communications. Method 3 - Data Network Experience: To qualify based on data network experience, you must have either one OR two years of SE as listed below: * One year of SE: SE must be with Cisco switch and router programming in network infrastructure, network maintenance, and/or telecommunications; or * Two years of SE: SE can be with any switch and router programming brand in network infrastructure, network maintenance, and/or telecommunications. Method 4 - Physical Security Systems Experience: To qualify based on physical security systems experience, you must have two years of SE as described below: * Two years of SE: SE must be in alarm installation, access control installation, security programming, and/or video security system installation. Education Applicants can qualify for the GS-7 level based on Specialized Experience (SE) or Education. There are four (4) methods by which candidates may meet the qualification requirements for the Electronics Technician Trainee GS-7 position. Please see above for further details. Additional information PHYSICAL DEMANDS Work requires strenuous physical exertion such as climbing tall ladders or towers, long periods of standing, recurring bending, crouching, stooping, stretching, reaching or similar activities; and recurring lifting heavy objects in excess of 50 pounds such as radio and related communications systems. WORK ENVIRONMENT Work involves high risks with exposure to potentially dangerous situations such as electrical shocks, falls from high towers, inclement weather conditions (rain, snow, ice, and high winds), requiring a range of safety and other precautions, including accompaniment by another technician when performing duties considered hazardous to life and limb. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help Review our benefits How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. Your application will be evaluated using the FBI's Candidate Rating Procedures. Your resume and supporting documents will be reviewed to verify that you meet the job qualifications listed in this announcement and will be compared against your responses to the online assessment questionnaire. If your self-assessment in the vacancy questions is not supported by details in your resume or supporting documents, you may be disqualified from the Most Competitive category. Veterans' preference will be applied. Applicants must meet the qualification requirements by the closing date of this announcement. If you are found minimally qualified, your application will move forward to additional phases of the review process. The competencies will be used in a Structured Resume Review to objectively evaluate applicant resumes. Do not provide a separate narrative written statement. Rather you must describe in your resume how your past work experience demonstrates that you possess the competencies identified below. Your resume should demonstrate that you possess the following competencies. Competencies: * Communication * Electronics * Flexibility/Adaptability * Initiative * Organizing and Planning * Problem Solving/Judgment Benefits Help Review our benefits Required documents Required Documents Help * A two-page resume that outlines relevant work experience and associated start and end dates. Resumes exceeding two pages will not be considered. * A complete assessment questionnaire Other supporting documents (if applicable): * College transcripts, if qualifying based on education or if there is a positive education requirement * Notification of Personnel Action, SF-50; not applicable to current FBI employees * Most recent Performance Appraisal; not applicable to current FBI employees Veterans: DD 214; Disabled Veterans: DD 214, SF-15, and VA letter dated 1991 or later * Memorandum for Record (MFR): Work performed outside assigned duties (that would not normally be documented on an SF-50, i. e., back-up duties), has to be documented in detail by an immediate supervisor in order to receive full credit for amount of time worked in that position. If no documentation is furnished no credit will be given for time worked in that position. The following notations must be specified in the documentation: * Percent of time worked in the particular position (cannot conflict with main duties. * The month/year work began Frequency worked (i.e., daily, monthly, etc.) * Specific duties performed

Job Description Electronic Technician will support a DoD Program Office supporting various Force Protection Assets and Products. Job Responsibilities: Perform senior electronic technician duties, utilizing a broad knowledge of complex electronic equipment principles, techniques, and a thorough knowledge of digital and analog circuitry Provide for component diagnostics, repair and functional check out Provide for bench stock management for all bench stock type items needed for component repair. Examples of tasks include but are not limited to: troubleshoot/repair Force Protection equipment to the component level, make condemnation decisions on unserviceable equipment as required, bench test/perform operational assessments of Force Protection equipment before returning to serviceable stock, provide life-cycle logistics advice to CCSD, based on technical knowledge and research, for spares and obsolescence decisions Requirements Required Skills and Experience: 4 years of experience as an electronics technician ***Must have TS with SCI eligibility to be considered*** Physical Demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle or feel objects, tools, or control; reach with hands and arms: talk, see and hear. Employee must occasionally lift and/or move up to 25 pounds or more depending on the job. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust and focus. The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Employee will routinely work on energized equipment using various electronic diagnostic equipment. Personal Protective Equipment (PPE) will be used at all times. Safety shoes will be used routinely. Hearing and sight PPE will be available on site. POSITION TYPE AND TYPICAL WORK HOURS: Eight hour day between Monday through Friday; 6:30 a.m. - 4:00 p.m (flexable). If a lunch break is taken, hours will be modified accordingly. JOB RELATED TRAVEL: Minimal; Employee will be given ample opportunity to prepare for any travel. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development Wellness Resources Stock Option Plan

VVater is a US-based, next-generation water treatment company that aims to provide Water for Humankind with a cornerstone of sustainability and a promise of a better, healthier tomorrow, servicing various industries and markets around the world from Real Estate, Wastewater Treatment, Municipal Potable Water, and multiple others, in particular, focusing on the recovering and recycling of different waters in a centralized or decentralized way. The company also provides artificial beaches, urban lagoons, wave pools, surf parks, aquatics services, sewage treatment, wastewater treatment, and drinking water solutions. Job Summary: VVater seeks a highly skilled Mechatronics Technician to build, integrate, and troubleshoot advanced electro-mechanical systems that include actuators, servos, motors, hydraulic and pneumatic components, motion assemblies, and automated mechanisms. This role supports R&D, engineering, product development, and production by turning designs into working automated systems, ranging from deployable mechanical structures to motion-controlled assemblies used in VVater's next-generation water treatment technologies. The ideal candidate is a hands-on problem solver who thrives in a fast-paced engineering environment and is fluent across mechanical, electrical, and automation disciplines. Duties and Responsibilities: Assemble and integrate actuators, servo motors, linear guides, rotary drives, gear systems, solenoids, and automated linkages into working mechanical systems. Build and maintain hydraulic and pneumatic subsystems, including cylinders, valves, regulators, manifolds, pumps, and fluid routing hardware. Install and route sensor packages (limit switches, optical sensors, encoders, proximity sensors, pressure/flow sensors) for feedback and control. Perform electrical wiring, termination, crimping, labeling, and cable management for automation assemblies. Support controls engineers with integration of PLC/SCADA and low-voltage control signals (24VDC, analog/digital I/O). Interpret mechanical drawings, electrical schematics, hydraulic diagrams, motion drawings, and 3D CAD output to guide assembly and troubleshooting. Assist in building robotic or transformer-like mechanisms that extend, fold, lift, rotate, engage, or change physical configuration automatically. Execute functional testing, calibration, alignment, and tuning of electro-mechanical assemblies. Troubleshoot automation faults, diagnose issues in actuators, drives, sensors, relays, control loops, and mechanical subassemblies. Assist in creating automated test rigs, dynamic fixtures, and motion-based prototypes for R&D validation. Collaborate with mechanical, electrical, R&D, and fabrication teams to refine designs and improve repeatability and manufacturability. Perform light machining, drilling, tapping, cutting, grinding, and assembly prep as needed. Maintain shop equipment, tools, wiring stations, hydraulic lines, and safety protocols. Support pilot units, factory builds, field installations, and commissioning when required. Perform all other duties as instructed by the company. Skills and Qualifications: • 3-7+ years of hands-on experience as a Mechatronics Technician, Automation Technician, Electromechanical Technician, Robotics Technician, or related role. • Strong experience with actuators, servos, linear actuators, hydraulic cylinders, pneumatic systems, valves, pumps, and motion assemblies. • Ability to read and interpret mechanical drawings, electrical schematics, wiring diagrams, hydraulic/pneumatic schematics, and P&IDs. • Proficient in electrical wiring, cable harnessing, crimping, soldering, and connectorization. • Familiarity with PLC/automation signals (24VDC, analog inputs, digital I/O) and drive controls. • Strong mechanical aptitude and ability to diagnose multi-discipline issues (mechanical/electrical/hydraulic). • Experience using hand tools, power tools, metrology tools, and shop equipment. • Knowledge of basic machining or fabrication (CNC, drill press, grinders, band saws) is a plus. • Technical diploma or associate degree in Mechatronics, Industrial Automation, Electromechanical Technology, Robotics, or similar field preferred. • Experience in water treatment equipment, industrial machinery, automation, aerospace, automotive systems, or robotics environments is an advantage. • Strong communication skills and ability to work cross-functionally with engineering, R&D, fabrication, and field teams. Note: This job description is not exhaustive. Additional duties and responsibilities may be added as the role evolves and as projects demand. Flexibility and a willingness to adapt are essential qualities for this position. **As a part of our process to ensure a comprehensive evaluation of all applicants, assessment tests are required as part of our recruitment process. Unfortunately, should you elect not to participate in completing the assessment tests, your application will not be able to progress to the next stage or taken into consideration during evaluation.

Job Description EControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers' risk and clear a path to their success. We immerse ourselves in our customers' world, reveal unknowns and deliver integrated solutions. We have a global footprint ready to serve customers with high-level product support and deep application engineering. The company employs over 700 employees worldwide dedicated to serving our customers and markets on virtually every continent. We have locations in Texas, and Oklahoma, as well as multiple overseas operations in Europe, and Asia. Responsibilities · Support new equipment build efforts · Help plan and wire electrical portion of new equipment · Assemble and troubleshoot mechanical aspects of new equipment · Assist with installation of new equipment · Help update existing equipment and fixtures to improve quality, functionality and safety · Help fabricate basic fixtures and brackets for new and existing equipment · Troubleshoot and repair existing equipment Requirements / Qualifications · An associate degree in electro-mechanics or related technical discipline with vocational/technical training, or equivalent experience · Experience in reading mechanical drawings and wiring diagrams · Experience with electrical and mechanical troubleshooting · Ability to learn and understand electro-mechanical systems and robots · Proficient in the use of small manual and power tools · Working knowledge of computers including Windows and Microsoft applications · Excellent verbal communication and team skills · Experience assembling/installing industrial equipment Powered by JazzHR coh H81DihZ

Applied Research Solutions is seeking a full-time Engineering Technician at Lackland AFB-San Antonio, TX. Why Work with us ? Applied Research Solutions (ARS) is respected as a world-class provider of technically integrated solutions as we deliver premier talent and technology across our focused markets for unparalleled, continuous mission support. Awarded a Best Places to Work nominee since 2020, ARS recognizes that without our career- driven, loyal professionals, we would not be able to deliver state-of-the-art results for our mission partners. We firmly believe that prioritizing our employees is of the upmost importance. We provide a culture where our employees are challenged to meet their career goals and aspirations, while still obtaining a work/life balance. ARS employees are motivated through our industry competitive benefits package, our awards and recognition program, and personalized attention from ARS Senior Managers. Detailed Description: Research and analyze network design Conducting engineering tests and troubleshooting on server validation platforms. Technical functions in support of engineering Experimental testing to collect data and assist in research work. Performing initial reviews of test result and uploading output data to appropriate repositories. Troubleshooting when validation platforms fail to yield desired results. Communicate results and prompt notification of any gating issues. Support cross function engineers Build configure and test server validation platforms. Installation of various PC operating system and software applications Configure/operate industry standard test and measurement equipment for debug and data collection. Installation and configuration of network KVMs and power distribution units. The work involves functions such as research, data analysis, development, design, evaluation, inspection, problem solving, production, application, standardization, testing, or operation of engineering facilities, structures, systems, processes, equipment, devices, or materials. Other duties as assigned Qualifications/Technical Requirements Must be U.S. Citizen Active TS/SCI Clearance. Two Year degree or equivalent experience 5+ years of experience working at an Engineering Technician capacity Experience working with COMSEC Equipment Experience in installation, troubleshooting and diagnosis of issues in Windows/Linux OS environments Knowledge of general validation and automation principles All positions at Applied Research Solutions are subject to background investigations. Employment is contingent upon successful completion of a background investigation including criminal history and identity check. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-741.5(a). This regulation prohibits discrimination against qualified individuals on the basis of disability, and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans, and requires affirmative action by covered contractors and subcontractors to employ and advance in employment qualified protected veterans.

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES OF THIS ROLE include the following. (Other duties may be assigned.) Coordinates various projects from concept to completion including: Process design flow, develops capital equipment specifications, presents justification for equipment purchases to management, negotiates equipment pricing suppliers, equipment procurement, coordinates equipment installation with outside contractors, process installation and debugging, trains personnel on how to operate new equipment. Performs troubleshooting on automated equipment. Designs small assembly machines, programming, and HMI. Supervises various facilities construction projects throughout plant. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Technical Bachelor's degree (B.S) from four-year college or university and two or more years related experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS OTHER SKILLS AND ABILITIES PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. The employee is occasionally required to sit. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; and extreme heat. The noise level in the work environment is usually moderate. AUTOMATION Ability to program and operate PLC preferred. Ability to program and operate Robots preferred. Ability to program and operate Vision systems preferred. Ability to program and operate HMI preferred.

Job DescriptionSalary: $20.00 - $29.00 per hour + OT (DOE) Whowe are Since 1972, Kier + Wright has beendriven by people, communities and the places that bring us together. With every project, we work to build connections and strengthen relationships. Through our work, we strive to keep communities moving forward, growing sustainably, steadily and purposefully toward a better tomorrow.For more information about our services, visitkierwright.com. EEO SUMMARY The Engineering Technician will be in charge of independently producing engineering design plans for public works project and land development, utilizing AutoCAD software. They will be responsible for working with an engineering design team from initial concepts to final plan production. They will also draft various sketches, plans, and exhibits using CAD. RESPONSIBILITIES Technical Carries out tasks assigned by the Project Lead and engineering team. Drafting grading, drainage, utility, street frontage improvements, and stormwater management plans in AutoCAD Civil 3D. Proficient in AutoCAD Civil3D grading feature lines and utility pipe networks. Preparing drawings per company and public agency CAD standards and project-dependent CAD specifications. EDUCATION + EXPERIENCE 0-2 years of experience in a position requiring intensive AutoCAD/Civil 3D Experience drafting on-site and off-site improvement drawings for land development projects. General knowledge of computers, Microsoft office, Adobe, Internet, etc. Experience with BlueBeam a plus. SKILLS Employee Self-Management Skills Collaboration: Effective working relationships with management, coworkers, subordinates and clients. Mutual respect. Listening to others, adapting to changes, debating alternatives, being open-minded and producing a superior outcome as the result of effective teamwork. Problem Solving: The ability to develop a timely, efficient solution or alternative when a posed with a problem; thinking outside the box; paying attention to the details. Responsiveness/Communication: Communicating in a prompt and professional manner; providing relevant and timely information to management, coworkers, subordinates and clients in a clear, concise and direct manner. Self-Responsible: Taking control and accountability; not waiting for others to direct. Efficient: Ability to maintain focus, stay organized, manage multiple tasks and complete work within deadlines, with minimal errors in a fast-paced environment. Adaptable: Ability to modify practices, systems or attitudes to align with new requirements. Specialty Skills Understanding Civil3D, AutoCAD Basic understanding of Civil Engineering Basic understanding of topographic and boundary surveys Ability to understand and interpret design intent as communicated by engineers. PHYSCIAL REQUIREMENTS AND/OR WORKING CONDITIONS Prolonged periods of sitting (up to 8 hours a day for office staff) Interacting with technology (computer, cellphone, etc.) Ability to lift and/or carry items ( up to 20 lbs.) Prolonged periods of standing/walking (field checks) Ability to work outdoors in various weather conditions (field checks) Occasional travel e.g. driving to offices, jobsites, client meetings, etc. Why Kier + Wright? Great culture Team Collaboration, Innovative problem solving, Responsive to clients, Passionate about work Competitive Pay ($20 - $29/hr + overtime DOE + location) Paid Holidays Free office snacks Much more!

Electronic Technician will support a DoD Program Office supporting various Force Protection Assets and Products. Job Responsibilities: Perform senior electronic technician duties, utilizing a broad knowledge of complex electronic equipment principles, techniques, and a thorough knowledge of digital and analog circuitry Provide for component diagnostics, repair and functional check out Provide for bench stock management for all bench stock type items needed for component repair. Examples of tasks include but are not limited to: troubleshoot/repair Force Protection equipment to the component level, make condemnation decisions on unserviceable equipment as required, bench test/perform operational assessments of Force Protection equipment before returning to serviceable stock, provide life-cycle logistics advice to CCSD, based on technical knowledge and research, for spares and obsolescence decisions Requirements Required Skills and Experience: 4 years of experience as an electronics technician ***Must have TS with SCI eligibility to be considered*** Physical Demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle or feel objects, tools, or control; reach with hands and arms: talk, see and hear. Employee must occasionally lift and/or move up to 25 pounds or more depending on the job. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust and focus. The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Employee will routinely work on energized equipment using various electronic diagnostic equipment. Personal Protective Equipment (PPE) will be used at all times. Safety shoes will be used routinely. Hearing and sight PPE will be available on site. POSITION TYPE AND TYPICAL WORK HOURS: Eight hour day between Monday through Friday; 6:30 a.m. - 4:00 p.m (flexable). If a lunch break is taken, hours will be modified accordingly. JOB RELATED TRAVEL: Minimal; Employee will be given ample opportunity to prepare for any travel. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development Wellness Resources Stock Option Plan

EControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers' risk and clear a path to their success. We immerse ourselves in our customers' world, reveal unknowns and deliver integrated solutions. We have a global footprint ready to serve customers with high-level product support and deep application engineering. The company employs over 700 employees worldwide dedicated to serving our customers and markets on virtually every continent. We have locations in Texas, and Oklahoma, as well as multiple overseas operations in Europe, and Asia. Responsibilities · Support new equipment build efforts · Help plan and wire electrical portion of new equipment · Assemble and troubleshoot mechanical aspects of new equipment · Assist with installation of new equipment · Help update existing equipment and fixtures to improve quality, functionality and safety · Help fabricate basic fixtures and brackets for new and existing equipment · Troubleshoot and repair existing equipment Requirements / Qualifications · An associate degree in electro-mechanics or related technical discipline with vocational/technical training, or equivalent experience · Experience in reading mechanical drawings and wiring diagrams · Experience with electrical and mechanical troubleshooting · Ability to learn and understand electro-mechanical systems and robots · Proficient in the use of small manual and power tools · Working knowledge of computers including Windows and Microsoft applications · Excellent verbal communication and team skills · Experience assembling/installing industrial equipment

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.