Electronics technician jobs in Warwick, RI - 551 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Title: Electrical-Mechanical Specialist Type: Full-Time Shifts Available: 2nd Shift - 2:50 PM to 11:00 PM (Ball Plant II & III) 3rd Shift - 10:50 PM to 7:00 AM, Sunday start (Ball Plant II, III & Custom) WECC Shift - Fri 10:50 PM-11:00 AM & Sun 10:50 AM-11:00 PM + 1-2 weekday shifts (Ball Plant II) Benefits start day 1: Medical, PTO, paid holidays, 401(k) match, annual incentive eligibility, associate discounts, and more. About the Role: We are hiring an Electrical-Mechanical Specialist to support our high-tech manufacturing operations. In this role, you'll work independently and collaboratively to analyze, troubleshoot, and maintain cutting-edge production equipment. You'll also support continuous improvement and equipment reliability initiatives across the plant. Key Responsibilities Independently troubleshoot, repair, and rebuild complex electrical/electronic, hydraulic, and pneumatic systems Perform preventive and predictive maintenance per schedules Plan and execute tasks efficiently to minimize production downtime Assist engineering with equipment modifications and project implementations Calibrate and repair various instrumentation and measuring equipment Record maintenance activities using our computerized maintenance system What You Bring High school diploma required; vocational training or associate degree in electrical/electronic disciplines preferred Minimum of 3 years; experience in an industrial electrical maintenance role (or 7+ years of experience without formal post-secondary education) Successful completion of a skills assessment and interview process Must have own trade tools Special Credentials & Skills Expertise in installing, troubleshooting, and maintaining electrical and mechanical systems Knowledge of AC/DC circuits, PLCs, instrumentation, HVAC, plumbing, and piping Proficient in reading schematics, blueprints, and using measurement tools Familiar with safety protocols including Lock Out-Tag Out and NFPA 70E Comfortable using cranes, hoists, power tools, and diagnostic equipment Strong communication and interpersonal skills Preferred Certifications (Not Required) MA Journeyman or Master Electrician License MA 2nd Class Fireman License Universal Refrigeration License Class A or B CDL Forklift / Man-lift Certification

This is a travel role- folks need their own reliable car and be okay with traveling to different sites Win 11 Deployment project (travel is required) This goes through June 2026 right now Must meet all medical compliance for a hospital (drug and medical) This healthcare client is undergoing a Windows 11 upgrade project. This includes upgrades in all the hospital and ambulatory site locations. This will be about 5-6,000 devices that need upgrading. Deployment will be via thumb drive and automated / scripted. This candidate needs imaging/deployment experience. This person will not be doing hard work and will only be on contract until all the devices are deployed (expected to finish up in December). * Are looking for bringing on 20 contractors for a Windows 11 deployment. * Target start date of end of September * Multiple regions / Sites. * Drug, BG, medical + vax. * 1 round virtual screening call (10-15 minutes long) *Skills* Hardware Support, Windows 10, Desktop, Windows, Support, Troubleshooting *Job Type & Location*This is a Contract position based out of Norwich, CT. *Pay and Benefits*The pay range for this position is $18.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Norwich,CT. *Application Deadline*This position is anticipated to close on Jan 25, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

advertised has been exempted from the federal civilian hiring freeze. At the FBI, we don't just hire talent-we build it from the ground up. We employ individuals who are not only ready to enhance their electronics proficiency but also looking to contribute effectively to their teams. The electronics technician role is crucial. You'll be responsible for diagnosing and resolving issues, setting up new systems, making improvements, and ensuring the proper functioning of intricate electronic systems. Your expertise extends to a wide range of interconnected subsystems, such as electronic warfare technologies, network systems, locks, alarms, and surveillance equipment deployed in various settings, including offices and vehicles. When urgent investigations demand immediate assistance, electronics technicians are there to provide their invaluable support to special agents. You excel at troubleshooting, using your problem-solving abilities to conduct maintenance and repairs and operate a variety of test equipment, both standard and specialized. From installation to maintenance and operational testing, you are adept at every phase, always striving to outpace emerging threats by pushing the boundaries of your skills in technology and network optimization. With the FBI's specialized training and professional development courses, working at the Bureau will help you become more efficient, improve your skill set, and advance your career -all while making a significant impact on national security. Set yourself apart. Apply today. HOW TO APPLY STEP 1: Click on the “Apply” button to be directed to the FBIJobs Careers website. STEP 2: Click the “Start” button to begin. You will be prompted to either sign in to continue or register with FBIJobs if you don't already have an account. STEP 3: Follow the step-by-step process to submit your interest. You will be guided through each step. You must complete all sections of the form AND ALL REQUIRED DOCUMENTS MUST BE ATTACHED to successfully submit your interest. Your resume, specifically noting relevant work experience and associated start and end dates. Other supporting documents: College transcripts, if qualifying based on education or if there is a positive education requirement. Veterans: DD 214; Disabled Veterans: DD 214, SF-15, and VA letter dated 1991 or later. Please see instructions on the site for attaching documents. SALARY LEVEL Pay level for this position: GS 7-9: $42,679.00-$67,865.00 Salary shown is the base salary for the grade levels. Salary is also commensurate with professional experience. MAJOR DUTIES Perform installation, maintenance, and operational testing required to maintain the Bureau's communication and intrusion systems in optimal condition. Perform maintenance and service functions required to obtain optimal operational capability of a wide variety of complex equipment incorporated into FM radio, radio teletype, secure telephone, data and teletype, and intrusion systems. Use test equipment and advanced techniques to perform installation, maintenance, and repair tasks as well as operational testing of the FM radio system (base stations, repeaters, remote and mobile transmitters/receivers, and personal equipment). Conduct preventive maintenance by regularly inspecting and testing equipment for reliability and accuracy to prevent breakdown. Perform corrective maintenance to restore systems that are out of operating condition through extensive analytical testing and take positive action to replace or repair deficient or malfunctioning components and units. Review pertinent technical manuals, remain current with technology, and be available to attend government-sponsored training classes. SPECIALIZED EXPERIENCE GS-7: Applicant must possess at least one year of specialized experience (SE) equivalent to the GS-5 grade level. SE is defined as follows: Assisted with the physical installation and maintenance of electronic communication systems. Conducted routine equipment tests; performed basic corrections and/or replacing defective parts. Handled, stored, and inventoried a variety of electronic equipment and components. GS-9: Applicant must possess at least one year of specialized experience (SE) equivalent to the GS-7 grade level. SE is defined as follows: In addition to the above: Performed physical installation, maintenance, and troubleshooting of electronic communication systems. Performed installations and preventive and corrective (or emergency) maintenance and service work on FM radio systems, data networks, or electronic physical security systems. Inspected equipment for adherence to standards and tolerances. KEY REQUIREMENTS Must be a U.S. citizen. Must have (or be able to obtain) a valid driver's license. Must be able to obtain a Top Secret Sensitive Compartmented Information (SCI) Clearance. Must be willing to travel as required. Must meet the FBI's Employment Eligibility requirements. EDUCATION AND EXPERIENTIAL REQUIREMENTS EDUCATION Candidates must have a bachelor's degree or higher from a U.S. accredited college or university in one of the following fields: Electronics Engineering, Electrical Engineering, Electronics Engineering Technology, Electronics Technology, Networking, Telecommunications, or Computer Science. Education may be substituted for specialized experience (SE) as follows: GS-7: Applicant must have a bachelor's degree with superior academic achievement or one full year of graduate-level education. Superior academic achievement is the completion of all the requirements of a bachelor's degree from an accredited college or Electronics Technician, DC1 1/15/26 4 of 4 university, which is based on (1) class standing, (2) grade-point average of 3.0 or higher as recorded on an official transcript or as based on courses completed during the final two years of the curriculum, or (3) honor society membership. GS-9:Applicant must have a master's or equivalent graduate degree OR two full years of progressively higher-level graduate education leading to such a degree (or LLB or JD, if related). All degrees must be verified by submitting college transcripts. The FBI is an Equal Opportunity Employer, and all qualified applicants will receive consideration for this vacancy. Unless explicitly authorized by law, selection will be made without regard to, and there will be no discrimination because of, color, race, religion, national origin, marital status, parental status, physical or mental disability, genetic information, age (40 or over), sex, pregnancy and related conditions, or on the basis of personal favoritism, or any other non-merit factors.

Job SummaryRDSI has a planned opening for an entry-to-mid level Electronic Technician in their Pawcatuck, CT location. The successful candidate will initially produce the lighting kits and light assemblies, along with associated parts management support, and longer term provide technical support for development and legacy Navy communication systems, Electronic Warfare, and Bridge Light programs. Responsibilities Fabricate parts Assemble products and sub-assemblies Manage parts inventory Review schematic diagrams Able to handle multiple tasks concurrently Troubleshoot and repair circuit boards and electronics Perform electrical analysis and testing Support testing of communications and antenna systems Qualifications Able to read and comprehend wiring diagrams and schematics Solder proficiently Install wiring and connectors Familiar with Navy Systems Requirements Associates degree in technical field or equivalent Must be familiar in the use of Microsoft Office Outlook, Word, Excel and Power Point Good oral and written skills Must possess good interpersonal skills The candidate must be a self-starter and be able to work independently with a minimum of supervision Familiarity with LabView software a plus Familiarity with Fibre installation a plus Must have or be eligible for a Secret Clearance Applicants selected will be subject to a security investigation and must meet eligibility requirements for access to classified information.RDSI is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

TSC is seeking an entry level Elecrtomechanical Technician with experience or interest in cable assemblies, electronic components, and precision mechanical work to support work in our Plymouth, MA location. The ideal candidate is hands-on, detail-oriented, and knowledgeable about manufacturing best practices within an ISO9000-compliant environment. Key Responsibilities Manufacture and assemble electronic assemblies, including: Soldering (surface-mount and through-hole) Crimping a wide range of terminals and connectors Heat-shrink applications and harness routing Work with printed wiring assemblies (PWAs) and printed circuit boards (PCBs), including component installation, inspection, and rework. Fabricate and modify sheet metal components using shop tools. Operate machinery such as but not limited to: drill press, precision hand tools, measurement and inspection equipment (calipers, micrometers, torque tools), torque fasteners and mechanical assemblies to specified values using calibrated tools. Follow all manufacturing best practices, workmanship standards, and engineering documentation (schematics, drawings, work instructions, travelers). Ensure work adheres to ISO9000 quality management procedures. Conduct in-process inspections and maintain accurate production records. Collaborate with engineering, quality, and production teams to support continuous improvements. Required Qualifications 1-2 years of experience in a manufacturing or an electronics assembly role (or equivalent hands-on background) US Citizenship and the ability to obtain and maintain a government security clearance. Proficiency in electrical cable assembly and soldering (IPC-620 or IPC-610 certification is a plus), crimping and use of manual/automated crimp tools Efficient in PCB handling and ESD-safe work practices Strong mechanical aptitude and ability to read engineering drawings. Understanding of ISO9000 or similar quality standards. Ability to work independently, manage multiple tasks, and meet production deadlines. Strong attention to detail, quality, and safety. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including Employee Stock Option Plan (ESOP) participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. TSC is a growing organization with unlimited opportunity! Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Electronics Technician KiddeFenwal, LLC KiddeFenwal is the global market leader in designing and manufacturing innovative industrial and commercial fire suppression systems and safety controls. Our proprietary, fully certified offerings save lives, protect property, and minimize business interruption. Our brands-Kidde Fire Systems and Kidde Fire Protection-deliver highly engineered fire suppression, detection, and control systems across industrial, commercial, and marine sectors. Fenwal Controls supports OEMs with gas ignition, temperature control, and overheat detection products. Headquartered in Ashland, Massachusetts, KiddeFenwal operates globally, with facilities in the U.S., United Kingdom (KFI-UK), and India (KTI-India). Learn more at ******************* Our Purpose We protect lives, livelihoods, and iconic assets through innovative solutions, strong partnerships, and exceptional customer experiences. Built on a foundation of integrity and safety, we drive results with speed and excellence while fostering innovation and teamwork. Position Summary The key responsibilities include Work under limited supervision to provide technical support and task ownership to electrical engineers on a variety of engineering tasks. Execution of functional and environmental testing of electronic boards/control panel and associated equipment. Perform fault isolation testing on systems and equipment and assist engineers in determining methods or actions to remedy malfunctions. Perform soldering, wiring, fixture setup as required. Work with regulatory engineers for lab qualification program for regulatory agency testing Documentation of results and tracking of units under test (UUTs) using internally developed practices and procedures. Maintain inventory of piece parts that support the delivery of rapid prototypes. Collaborate with colleagues to maintain and manage inventory of key electronic equipment and assemblies. Participate in team meetings, providing accurate status, raising issues and risks. Actively participate in, and maintain strict compliance to, all company Policies and Procedures. All other duties as assigned This position reports to the Sr. Engineering Manager and involves collaboration with engineering teams. Experience and Competencies Experience with execution of functional and environmental testing of electronic devices. Hands-on experience with component-level troubleshooting of analog and digital circuits. Proficient in use and operation of electronic lab tools/equipment such as oscilloscopes, power meters, frequency counters, multimeters, temperature/environmental chambers, and spectrum analyzers. Experience documenting test procedures and communicating results to internal customers and regulatory agencies for product certification Able to read and interpret engineering drawings, electrical schematics, test data, test procedures and specifications Able to maintain and update equipment calibration records, test setup details, test records for agency review Able to quickly adjust to shifting priorities, perform and deliver in a fast-paced environment Self-motivated team-oriented individual who has the ability to work efficiently and safely in a laboratory environment with clear direction and minimal supervision Basic Qualifications Min. AA/AS degree (or other 2-year post high school training) Min. 3 years of relevant experience Preferred Qualifications/Competencies Experience documenting test procedures and communicating results to internal customers. Experience in understanding/developing programming / test fixtures Solid written and verbal communication skills Proficient in use of Microsoft Word, Outlook, and Excel software. Experience with test facility and equipment maintenance and management. Experience with use of Data Acquisition Equipment, i.e. National Instruments Lab View. Familiarity with C programming language and PIC family of microprocessors. Experience working with non-US based teams and suppliers. Sensitivity to cultural biases and understanding the communication practices needed to create successful partnerships in and open and supportive environment. KiddeFenwal, LLC. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other federally protected class.

We have an exciting opportunity to join us in supporting one of our valued customers as an Electronic Warfare SME supporting United States Special Operations Command (USSOCOM) and Special Operations Forces (SOF). Various Locations: Fort Belvoir, VA; Fort Bragg, NC; Lexington, KY; Fort Eustis, VA; Natick, MA * This position is contingent upon a contract award* Essential Duties: * Assist the SGM and Deputy for TT as the EW SME working in collaboration with government partners, academic laboratories, and private industry - to develop new tools and technology in support of the SOF Electronic Warfare community. * Assist in the preparation and development of new requirements documentation to include Initial Capabilities Documents (ICD), Capabilities Development Documents (CDD), SPECAT messages, Basis of Issue Plans (BOIP), Test Plans, and update Project Folders. * Tasks include the identification and development of Radio Detection and Ranging (RADAR) and Electronic Counter Measures (ECM), Intelligence, Surveillance, and Reconnaissance (ISR), Electronic Warfare (EW), and Signals Intelligence (SIGINT) for further development or fielding in support of SOF. Required Qualifications: * Qualifications include a background in EW, RADAR, ECM, ISR, EW, and SIGINT operations (particularly SOF) with a knowledge of EW techniques, tactics, & procedures. * 12+ years of relevant experience * Excellent communication, technical writing, and presentation skills. * Familiarity with DoD acquisition lifecycle and rapid prototyping processes. * Prior experience supporting USSOCOM, SOF AT&L, or other SOF components. (preferred). Education: Bachelor's or Master's degree in a related field Required Clearance: TS/SCI Travel: TBD Why Join USfalcon? * Mission-Focused Culture - Join a company deeply embedded in supporting defense, aerospace, and federal initiatives. * Career Growth & Development - Access training, mentorship, and advancement opportunities within a growing mid-tier defense contractor. * Trusted Industry Partner - Be part of a company with nearly 30 years of continuous service to DoD and federal clients.

Industrial Communications is an established and diverse wireless communications company providing powerful communications solutions to businesses, public safety, and government agencies throughout New England and South Florida. We have an immediate opening at our Marshfield, MA headquarters for an experienced Manager/Public Safety RF Systems. The essential duties and responsibilities for the Manager/Public Safety RF Systems are as follows: Design, implementation, and troubleshooting of two-way radio systems including infrastructure, subscribers, mobile backhaul Assist with customer presentations and proposals System staging System acceptance testing Radio coverage testing and interference mitigation Complete system documentation System upgrades Management of P25 sales personnel Management of RF systems technicians and network IT personnel Management of administrative support personnel Oversight of public safety network (fiber and microwave) JOB SPECIFICATIONS for the Manager/Public Safety RF Systems(Knowledge, Skill Sets, Experience, etc.) Bachelor's Degree in Engineering or Computer Science preferred 4+ years of experience RF systems engineering Experience/knowledge in radio communication systems, radio propagation, RF, wireless or broadband/LTE is preferred Strong technical acumen and willingness to interface with the customers Experience working with public safety customers Proven end-to-end technical experience in wireless communications (i.e., from mobile device through to core infrastructure) Strong general knowledge of wireless communications fundamentals and voice/data architectures Strong general knowledge of IP networking protocols and security Familiarity with Motorola Solutions' portfolio including ASTRO 25, Avtec, MOTOTRBO, WAVE/Team Communications, etc. a plus Familiarity with public safety radio systems design and operation Excellent verbal and written communications skills and the ability to present complex topics to non-technical audiences Ability to build strong relationships with internal and external stakeholders Self-motivated, excellent problem-solving skills, and a strong attention to detail CERTIFICATIONS CETa certification, FCC license, General Radio Operators License (GROL), APCO Public Safety Radio Technician is a plus. Electronics/Applied Electronics background desired.

This position is responsible for testing, aligning, troubleshooting, repairing and modifying circuit boards to obtain specified functionality. Test various circuit board chassis to comply with customer specs. Make repairs down to component level on circuit boards. Make adjustments and calibrations to circuit boards. Modifies functions of circuit boards to conform to specific requirements. Sets up standard test apparatus or test equipment and circuitry to conduct functional and operational tests to evaluate performance and reliability of circuit boards. Analyzes and interprets test data. Adjusts, calibrates, aligns, and modifies circuitry, components and records effects on unit performance. Complete paperwork associated with testing and troubleshooting. Fabricated cables for use with test equipment and circuit boards as needed. Qualifications: Must be able to troubleshoot down to component level. Must have strong skills with volt meters, spectrum analyzers, network analyzers, oscilloscopes, power supplies and signal generators. Strong electronics background especially in the Radio Frequency and digital electronics field. Must be able to read electronics schematics. Good deductive reasoning ability for troubleshooting. Demonstrates ability to be mechanically inclined with soldering skills. Must be open minded to perform all tasks needed. Background in radio communication a plus. Ability to use mechanical tools in the fabrication and assembly of chassis. Will be working under microscopes for long periods of time. Must be a US Citizen. Must pass a background check and drug test.

We are Energy Systems, the leader in industrial power solution sales, service, and rentals. With an ongoing tradition of providing excellent products and outstanding service for our customers, Energy Systems is one of the longest existing Generac Industrial Distributors in the United States. We are a full-service distributor of Generac equipment and solutions providing sales, service and rentals. Roles and Responsibilities: Provide battery and equipment replacement when necessary. Perform Quality Control and Site Inspections. Analyze test data and recognize deviation from acceptable values. Manage company assets, control personal inventory, and upload all field activity reports. Complete all assigned tasks in a timely manner. Take ownership of an assigned task and see it through to completion. Responsible for meeting annual goals set forth by Management (utilization, work completion, etc.). Provide ongoing customer support and meet customer service requirements. Extensive daily travel with an independent work structure. Work varied shifts to support our 7/24/365-day operation, including nights, weekends, and holidays, and serve on a rotating on-call team to respond to emergency calls. Minimum Requirements: High School Diploma or GED Formal training and/or experience maintaining and repairing power electronics equipment (ABB, APC, Eaton, Eltek, Mitsubishi, Toshiba, Vertiv). Valid current driver's license and driving record that meets company standards required. Occupational Safety and Health Association (OSHA) 10 or 30 training certificate. Department of Transportation (DOT) Medical Certificate Work Experience: Performing preventative maintenance and diagnostics on UPS systems, 25KVA and larger systems preferred. Performing preventative maintenance and diagnostics on batteries (VRLA, wet cell, Lithium Ion). Performing impedance/conductance measurements. A minimum of three years of education background, relevant work or related military experience in power electronics systems, battery technologies, and electronics repair. Knowledge / Skills / Abilities Strong analytical and technical skills, diagnostic capabilities, and the ability to learn new technologies and systems. Ability to read schematics drawings and company technical publications. Ability to read electrical drawings and knowledge of troubleshooting, testing and repair techniques. Good understanding of single-phase and three-phase circuit theory, analog and digital electronic circuit theory, and microprocessor controls and programming. Solid understanding of NFPA 70E work practices and Personal Protective Equipment (PPE). Understand how to perform phase rotation and phase alignment checks. Basic understanding of network functionality and sealed and wet-celled battery theory and application MS Office skills Preferred Job Requirements Associate degree 4 years of experience working on UPS systems Compensation: Generac is committed to fair and equitable compensation practices. This compensation will ultimately be in line with the location in which the position is filled. Final compensation for this role will be determined by various factors such as a candidate's relevant work experience, skills, certifications, and geographic location. This role is eligible for variable compensation including short term and long-term incentives. Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depending on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. Wire, test, and troubleshoot control panels and individual electrical subcomponents. Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. Read and mark-up electrical schematics. Assist with maintaining all equipment programs database. Follow company and industry workmanship standards for assembly and electrical work. Follow Lock-Out Tag-Out (LOTO) procedures as-needed. Set up and troubleshoot simple ethernet communications networks. performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. Recommend component replacement or upgrades when items become obsolete or are at end of life. Assist in maintaining building SCADA systems to ensure all are functioning as designed. Continuously improve the reliability of current systems Ability to effectively communicate with co-workers and take direction from others. Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. Other job duties as assigned EDUCATION AND/OR EXPERIENCE: 2 - 4 years of relevant experience Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking Familiarity with cGMP/GMP. Strong understanding of automated manufacturing equipment and programming required. Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) Proven experience with troubleshooting equipment problems and performing complex system tests required. Rockwell certification preferred. Proficient in MS Word, Excel, PowerPoint required. Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. Valid Massachusetts Driver's License required. Know the proper use of hand and power tools. Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: Must have good vision and manual dexterity. Able to sit / stand for prolonged periods at a desk and working on a computer. Must be able to work in a cold environment and in tight areas. Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. Loud Noise Perform tasks in both cold and hot work environments. Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! Enjoy top-tier Medical, Dental, Vision coverage. Pamper your furry friends with Pet Insurance. Stay fit with our Wellness Plan and Free Gym Access. Boost your skills with Employee Tuition Reimbursement. Unlock endless opportunities with College Scholarship for dependents. Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. Receive a Generous 401k Company Match. Take advantage of Competitive Paid Time Off. Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. Receive Relocation Assistance for a Smooth Transition. Earn Rewards through our Employee Bonus Referral Program. Elevate Your Workplace Experience with Community Impact Opportunities. Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

Throughout this Not-To-Exceed (NTE) assignment, Electronic Technician Trainees will build upon the experience they already have and be provided assignments to help prepare them to qualify for a permanent FBI Electronics Technician position. Successful trainees will obtain the experience needed to qualify for and be offered a permanent FBI Electronics Technician position. Unsuccessful trainees will be removed from FBI employment. Summary Throughout this Not-To-Exceed (NTE) assignment, Electronic Technician Trainees will build upon the experience they already have and be provided assignments to help prepare them to qualify for a permanent FBI Electronics Technician position. Successful trainees will obtain the experience needed to qualify for and be offered a permanent FBI Electronics Technician position. Unsuccessful trainees will be removed from FBI employment. Overview Help Accepting applications Open & closing dates 01/16/2026 to 01/30/2026 Salary $43,106 to - $56,039 per year Salaries listed above are the base rate of pay for the GS pay scale. Pay tables factoring in locality pay can be found at ************ Pay scale & grade GS 7 Locations Many vacancies in the following locations: Birmingham, AL Little Rock, AR Los Angeles, CA San Francisco, CA Show morefewer locations (6) New Haven, CT Boston, MA Minneapolis, MN Kansas City, MO Nashville, TN San Antonio, TX Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Temporary - NTE 2 years Work schedule Full-time Service Excepted Promotion potential 7 Job family (Series) * 0856 Electronics Technical Supervisory status No Security clearance Sensitive Compartmented Information Drug test Yes Financial disclosure Yes Bargaining unit status No Announcement number DESTIMP-12864090-26-VL Control number 854736500 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Federal employees - Competitive service Current federal employees whose agencies follow the U.S. Office of Personnel Management's hiring rules and pay scales. Federal employees - Excepted service Current federal employees whose agencies have their own hiring rules, pay scales and evaluation criteria. Internal to an agency Current federal employees of the hiring agency that posted the job announcement. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Veterans Veterans of the U.S. Armed Forces or a spouse, widow, widower or parent of a veteran, who may be eligible for derived preference Military spouses Military spouses of active duty service members or whose spouse is 100 percent disabled or died on active duty. Individuals with disabilities Individuals who are eligible under Schedule A. Clarification from the agency All U.S. Citizens. Duties Help * Perform simple, preventive and corrective maintenance on various items of equipment of the Bureau's communications and intrusion systems; test and replace defective components and perform preventive maintenance at predetermined intervals as recommended by manufacturers. * Assist higher grade technician(s) during installation, maintenance and removal of equipment and associated systems by performing basic test and maintenance checks developing skills necessary for performing advanced maintenance tasks. * Review pertinent technical manuals, remain current with technology, and be available to attend government sponsored training classes if offered to the trainee. * Make appropriate notation in equipment maintenance log regarding maintenance performed. * Take periodic inventory of radio parts and check results against a spare parts quota which is prepared by the senior technician in office. Requirements Help Conditions of employment * Must be a U.S. citizen. * Must have (or be able to obtain) a valid driver's license. * Must be able to obtain a Top Secret-SCI clearance. * Some travel may be required. Qualifications Applicants can qualify for the GS-7 level based on Specialized Experience (SE) or Education. There are four (4) methods by which candidates may meet the qualification requirements for the Electronics Technician Trainee GS-7 position: Method 1 - Education in Basic Electronics: To qualify based on education, you must have completed six (6) credit hours in basic electronics. Hours can be obtained in one or more of the following courses: * Electronics Fundamentals * Introduction to Electronics * Concepts of Direct Current * Concepts of Alternating Current * AC/DC Fundamentals * Electronic Circuits * Digital Electronics (Fundamentals) * Solid State Devices * Concepts of Solid State Electronics * Circuit Analysis * Applied Electronics * Microprocessors/Microcontrollers * Programmable Logic Controllers (PLCs) * Automatic Control Systems * Integrated Circuits * Controls and Automation * Analog Integrated Electronics * Power Semiconductor Electronics * Introduction to Embedded Systems All degrees must be from an accredited college or university. Education completed in foreign colleges or universities may be used to meet the above requirements provided you can show foreign education is comparable to that received in an accredited educational institution in the United States. Method 2 - Radio Experience: To qualify based on radio experience, you must have either one OR two years of SE as listed below: * One year of SE: SE must be with Motorola Radio in RF, Infrastructure Maintenance, Subscriber Devices, and/or Tactical Communications; or * Two years of SE: SE can be with any radio brand in RF, Infrastructure Maintenance, Subscriber Devices, and/or Tactical Communications. Method 3 - Data Network Experience: To qualify based on data network experience, you must have either one OR two years of SE as listed below: * One year of SE: SE must be with Cisco switch and router programming in network infrastructure, network maintenance, and/or telecommunications; or * Two years of SE: SE can be with any switch and router programming brand in network infrastructure, network maintenance, and/or telecommunications. Method 4 - Physical Security Systems Experience: To qualify based on physical security systems experience, you must have two years of SE as described below: * Two years of SE: SE must be in alarm installation, access control installation, security programming, and/or video security system installation. Education Applicants can qualify for the GS-7 level based on Specialized Experience (SE) or Education. There are four (4) methods by which candidates may meet the qualification requirements for the Electronics Technician Trainee GS-7 position. Please see above for further details. Additional information PHYSICAL DEMANDS Work requires strenuous physical exertion such as climbing tall ladders or towers, long periods of standing, recurring bending, crouching, stooping, stretching, reaching or similar activities; and recurring lifting heavy objects in excess of 50 pounds such as radio and related communications systems. WORK ENVIRONMENT Work involves high risks with exposure to potentially dangerous situations such as electrical shocks, falls from high towers, inclement weather conditions (rain, snow, ice, and high winds), requiring a range of safety and other precautions, including accompaniment by another technician when performing duties considered hazardous to life and limb. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help Review our benefits How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. Your application will be evaluated using the FBI's Candidate Rating Procedures. Your resume and supporting documents will be reviewed to verify that you meet the job qualifications listed in this announcement and will be compared against your responses to the online assessment questionnaire. If your self-assessment in the vacancy questions is not supported by details in your resume or supporting documents, you may be disqualified from the Most Competitive category. Veterans' preference will be applied. Applicants must meet the qualification requirements by the closing date of this announcement. If you are found minimally qualified, your application will move forward to additional phases of the review process. The competencies will be used in a Structured Resume Review to objectively evaluate applicant resumes. Do not provide a separate narrative written statement. Rather you must describe in your resume how your past work experience demonstrates that you possess the competencies identified below. Your resume should demonstrate that you possess the following competencies. Competencies: * Communication * Electronics * Flexibility/Adaptability * Initiative * Organizing and Planning * Problem Solving/Judgment Benefits Help Review our benefits Required documents Required Documents Help * A two-page resume that outlines relevant work experience and associated start and end dates. Resumes exceeding two pages will not be considered. * A complete assessment questionnaire Other supporting documents (if applicable): * College transcripts, if qualifying based on education or if there is a positive education requirement * Notification of Personnel Action, SF-50; not applicable to current FBI employees * Most recent Performance Appraisal; not applicable to current FBI employees Veterans: DD 214; Disabled Veterans: DD 214, SF-15, and VA letter dated 1991 or later * Memorandum for Record (MFR): Work performed outside assigned duties (that would not normally be documented on an SF-50, i. e., back-up duties), has to be documented in detail by an immediate supervisor in order to receive full credit for amount of time worked in that position. If no documentation is furnished no credit will be given for time worked in that position. The following notations must be specified in the documentation: * Percent of time worked in the particular position (cannot conflict with main duties. * The month/year work began Frequency worked (i.e., daily, monthly, etc.) * Specific duties performed

Job Description Island Tech Services is a leading provider of emergency and specialty vehicle upfitting solutions. We work with law enforcement, emergency responders, and various public safety departments to ensure their vehicles are equipped with the latest technology and modifications to perform efficiently in critical situations. Our team is dedicated to providing the highest level of service and craftsmanship in vehicle upfitting, and we are looking for a skilled Upfit Technician to join our team. Position Summary The Upfit Technician is responsible for installing, troubleshooting, and servicing various upfitting components for emergency and specialty vehicles. This includes wiring, lighting, sirens, and other equipment installations necessary for the customization and functionality of vehicles for our clients. The ideal candidate will have experience with automotive electronics and/or vehicle modifications and be committed to maintaining quality and safety standards. Key Responsibilities Perform custom installations of emergency lighting, sirens, radios, partitions, and other vehicle components. Wire and test electronic components to ensure proper function and safety. Diagnose, troubleshoot, and repair equipment and systems as needed. Follow established procedures, safety protocols, and quality standards. Document work performed, including parts used and time spent, in accordance with company and client requirements. Collaborate with other technicians and team members to meet project deadlines. Maintain a clean, organized workspace and care for all tools and equipment. Stay updated with the latest vehicle upfitting technology and best practices. Qualifications High school diploma or GED required; technical or trade school preferred. Previous experience with vehicle upfitting, automotive electronics, or a similar field is strongly preferred. Knowledge of vehicle electrical systems, wiring, and diagnostic procedures. Ability to read and interpret technical manuals, wiring diagrams, and schematics. Strong attention to detail, troubleshooting, and problem-solving skills. Ability to work independently and as part of a team. Valid driver's license and a clean driving record. Why Join Island Tech Services? Competitive pay and benefits package Opportunity to work in a dynamic, fast-growing industry Supportive team environment with ongoing training and development Be part of a company committed to innovation and quality in public safety Job Type: Full-time Payrate: $19-25/hour Benefits: 401(k) Health insurance Life insurance Paid time off Vision insurance Work Location: In person

Job Description Wire and build electrical control panels, junction boxes and subassemblies per customer requirement. Read and interpret schematics, diagrams, blueprints, specifications, work orders, bills of material. Drill or tap holes to mount control units or to provide openings for components, wiring, or instruments. Utilize a variety of small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, and pliers. Complete point-to-point wiring, and install a wide variety of electronic components including PLCs, relays, lights, switches, etc. Red-line documentation as necessary to initiate ECOs through Engineering. Perform operations such as deburring, grinding & sawing. Operate hand pallet jacks to move material within plant. Install finished assemblies or subassemblies in cases and cabinets. Willingness to work overtime as needed. EDUCATION AND EXPERIENCE Minimum of a High School Education. Technical Certificate in Electrical Controls is desired 2+ years' experience in control panel building, wiring, reading schematics and electrical diagrams. An understanding of electrical currents. Highly motivated, detail oriented and able to work independently as well as in a team environment. Mechanical installation and electrical wiring for control panels and desks. Experience using hand tools to drill, tap, and assemble electrical panel is a must. PHYSICAL DEMANDS Work involves frequent lifting of materials and product up to 30 pounds. Frequent use of hand tools. Long periods of standing. WORKING CONDITIONS Working conditions are normal for a manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to, eye safety glasses, hearing protectors, safety shoes, and hardhats. Loose fitting clothes and jewelry are not permitted. SAFETY RESPONSIBILITIES Safety shoes are always required throughout the manufacturing plant. Certifications as necessary based on function; lock out/tag out, fork truck certification. Other personal protective equipment as required for drilling, tapping, deburring, cutting, testing, lifting, and moving equipment. Pay Range (Massachusetts): $21.29 - 26.51 per hour. This range reflects the expected base pay for this position in Massachusetts and is based on internal equity and the established job family compensation structure. Actual compensation may vary based on experience, qualifications, and performance.

Our innovative startup seeks driven, high performance, high energy independent achievers who can work in a multidisciplinary team to build a groundbreaking electric VTOL platform that will be the foundation for a range of high performance ultra quiet Vertical Flight Systems. Job Description MagLev Aero is seeking an electromechanical technician to help build its electric propulsion thruster system prototypes. In this role, you will fabricate and test electromagnetic assemblies, wire harnesses, and mechanical test equipment. You will also perform mechanical and electronics rework, calibrate sensors, and take quality assurance measurements. You will work alongside our engineering team on-site and your craftsmanship will be a key contribution to the success of this project. Location : This is an on-site position at MagLev Aero's office located in Boston's Seaport District. Expected Responsibilities : Create and test wire harnesses in accordance with drawings or detailed descriptions. Assemble, rework, and test printed circuit boards from a schematic. Wind and pot coils and other electromagnetic assemblies from drawings. Refine existing processes for better throughput or superior performance. Assemble electro-mechanical test fixtures and test articles. Perform quality measurements on parts and systems. Qualifications Desired Skills : Prior experience building harnesses: stripping, crimping, and bundling. Prior experience winding coils desirable. Prior soldering experience. Experience with hot air tools is desirable. Comfortable using basic electrical test equipment (oscilloscopes, multimeters, isolation testers) in a prototyping environment. Able to understand electrical schematics and mechanical drawings. Experience with 3D drafting tools (e.g. Solidworks, Fusion, NX) is a plus, as is electrical drafting (e.g. OrCAD, Altium, VeSys, Solidworks Electrical) Comfortable around high voltage, electrical power systems, and chemical solvents. Prior high voltage experience is desirable but not required. Attention to detail. Able to make precise measurements using calipers and micrometers. Able to lift at least twenty-five pounds and stand for periods of 30 minutes. Proficient with hand and power tools. Familiar with basic machine shop tools (e.g. band saw, drill press). Experience with lathes/machining (CNC) is desirable but not required. Experience with 3D printing is desirable. Able to work independently from a set of tasks. Interested in process improvement. A few years of hands-on experience in a related area (aerospace, automotive, job shop, university lab) is desirable. Additional Information All your information will be kept confidential according to EEO guidelines.

Our innovative startup seeks driven, high performance, high energy independent achievers who can work in a multidisciplinary team to build a groundbreaking electric VTOL platform that will be the foundation for a range of high performance ultra quiet Vertical Flight Systems. Job Description MagLev Aero is seeking an electromechanical technician to help build its electric propulsion thruster system prototypes. In this role, you will fabricate and test electromagnetic assemblies, wire harnesses, and mechanical test equipment. You will also perform mechanical and electronics rework, calibrate sensors, and take quality assurance measurements. You will work alongside our engineering team on-site and your craftsmanship will be a key contribution to the success of this project. Location: This is an on-site position at MagLev Aero's office located in Boston's Seaport District. Expected Responsibilities: Create and test wire harnesses in accordance with drawings or detailed descriptions. Assemble, rework, and test printed circuit boards from a schematic. Wind and pot coils and other electromagnetic assemblies from drawings. Refine existing processes for better throughput or superior performance. Assemble electro-mechanical test fixtures and test articles. Perform quality measurements on parts and systems. Qualifications Desired Skills: Prior experience building harnesses: stripping, crimping, and bundling. Prior experience winding coils desirable. Prior soldering experience. Experience with hot air tools is desirable. Comfortable using basic electrical test equipment (oscilloscopes, multimeters, isolation testers) in a prototyping environment. Able to understand electrical schematics and mechanical drawings. Experience with 3D drafting tools (e.g. Solidworks, Fusion, NX) is a plus, as is electrical drafting (e.g. OrCAD, Altium, VeSys, Solidworks Electrical) Comfortable around high voltage, electrical power systems, and chemical solvents. Prior high voltage experience is desirable but not required. Attention to detail. Able to make precise measurements using calipers and micrometers. Able to lift at least twenty-five pounds and stand for periods of 30 minutes. Proficient with hand and power tools. Familiar with basic machine shop tools (e.g. band saw, drill press). Experience with lathes/machining (CNC) is desirable but not required. Experience with 3D printing is desirable. Able to work independently from a set of tasks. Interested in process improvement. A few years of hands-on experience in a related area (aerospace, automotive, job shop, university lab) is desirable. Additional Information All your information will be kept confidential according to EEO guidelines.

Benefits: 401(k) Health insurance Paid time off Training & development Vision insurance Bonus based on performance PRISM SPECIALTIES (Prism) is a disaster restoration company specializing in the restoration of both consumer and commercial electronics and appliances. We are currently seeking an entry level, reliable, and detail-oriented General Technician to join our company. No experience required, candidate will be trained in all aspects of the job. As an Electronics Technician, you will play a crucial role in evaluating, restoring, and delivering consumer electronics and equipment affected by various damages (fire, water, etc.) to ensure they are returned to their pre-loss condition. We will provide on the job training, no prior experience needed. Starting Pay: $17/hr - $19.50/hr If you're looking for an opportunity where your efforts lead directly towards helping others while developing your skills within the world of electronics restoration - we encourage you to apply! Key Responsibilities: Conduct on-site evaluations of damaged electronics from insurance claims related to fire or water damage. Safely inventory, remove, transport electronic items and appliances from insured properties. Disassemble electronic items for thorough evaluation; clean and restore them as needed. Document assessment results including model numbers and serial numbers using digital tools. Deliver restored electronic items back to insured homes or businesses; reinstall appliances with care (“white glove” service). What We Are Looking For: Attention to detail with strong organizational skills; ability to follow work instructions accurately. Excellent customer service skills conducive to providing high-quality support for our clients during sensitive times. Comfortable working in post-peril environments while lifting/carrying up to 50 pounds during pick-up/delivery activities. Valid driver's license with a satisfactory driving record required for operating company vehicles (box trucks). Mechanical inclination preferred along with problem-solving skills related to both troubleshooting electronics and equipment repairs. Job Type: Full-time Compensation: $17.00 - $19.50 per hour For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Restoration Specialties Corporate.

Job DescriptionBenefits: 401(k) Health insurance Paid time off Training & development Vision insurance Bonus based on performance PRISM SPECIALTIES (Prism) is a disaster restoration company specializing in the restoration of both consumer and commercial electronics and appliances. We are currently seeking an entry level, reliable, and detail-oriented General Technician to join our company. No experience required, candidate will be trained in all aspects of the job. Position Summary: As an Electronics Technician, you will play a crucial role in evaluating, restoring, and delivering consumer electronics and equipment affected by various damages (fire, water, etc.) to ensure they are returned to their pre-loss condition. We will provide on the job training, no prior experience needed. Starting Pay: $17/hr - $19.50/hr If youre looking for an opportunity where your efforts lead directly towards helping others while developing your skills within the world of electronics restoration we encourage you to apply! Key Responsibilities: Conduct on-site evaluations of damaged electronics from insurance claims related to fire or water damage. Safely inventory, remove, transport electronic items and appliances from insured properties. Disassemble electronic items for thorough evaluation; clean and restore them as needed. Document assessment results including model numbers and serial numbers using digital tools. Deliver restored electronic items back to insured homes or businesses; reinstall appliances with care (white glove service). What We Are Looking For: Attention to detail with strong organizational skills; ability to follow work instructions accurately. Excellent customer service skills conducive to providing high-quality support for our clients during sensitive times. Comfortable working in post-peril environments while lifting/carrying up to 50 pounds during pick-up/delivery activities. Valid drivers license with a satisfactory driving record required for operating company vehicles (box trucks). Mechanical inclination preferred along with problem-solving skills related to both troubleshooting electronics and equipment repairs. Job Type: Full-time