Electronics technician jobs in Yuma, AZ

Produces high quality diagnostic radiographs, rotates through advanced areas of diagnostic radiology to include OR, Urography, open reductions, myelography, arthrography, placements, and trauma; assists practitioner with fluoroscopy, arthrography, OR procedures and trauma. Under minimal supervision, performs basic to complex diagnostic radiographic procedures, as requested by a licensed physician. Exercises professional judgment in providing health care services, applying x-ray energy, to assist in diagnosis or treatment of patients in all age groups from newborn to elderly. Completes established competencies for the position within designated introductory period. Other related duties as assigned. Education: Required: Graduate of accredited Imaging Program Preferred: Associate degree Experience: Preferred: 1-3 years Certifications: Required: ARRT or registry eligible; must have ARRT within one year post graduation; AHA BLS, state license if required Physical Demands: Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

Who We Are We are a community built on care. Our caregivers and supporting staff extend compassion to those in need, helping to improve the health and well-being of those we serve, and provide comfort and healing. Your community is our community. Our Story We started out as a small operation in California. In May 1969, we acquired four hospitals, some additional care facilities and real estate for the future development of hospitals. Over the years, we've grown tremendously in size, scope and capability, building a home in new markets over time, and curating those homes to provide a compassionate environment for those entrusting us with their care. We have a rich history at Tenet. There are so many stories of compassionate care; so many "firsts" in terms of medical innovation; so many examples of enhancing healthcare delivery and shaping a business that is truly centered around patients and community need. Tenet and our predecessors have enabled us to touch many different elements of healthcare and make a difference in the lives of others. Our Impact Today Today, we are leading health system and services platform that continues to evolve in lockstep with community need. Tenet's operations include three businesses - our hospitals and physicians, USPI and Conifer Health Solutions. Our impact spreads far and deep with 65 hospitals and approximately 510 outpatient centers and additional sites of care. We are differentiated by our top notch medical specialists and service lines that are tailored within each community we serve. The work Conifer is doing will help provide the foundation for better health for clients across the country, through the delivery of healthcare-focused revenue cycle management and value-based care solutions. Together as an enterprise, we work to save lives and can accept nothing less than excellence from ourselves in service of our patients and their families, every day. Up to $30,000 Sign-On bonus based on experience! Doctors Medical Center Modesto is a full-service, comprehensive health care facility, dedicated to providing the finest medical care for the community. From preventative and diagnostic services, to expertise in some of the world's leading technologies, DMC's multidisciplinary team of physicians and healthcare professionals is dedicated to your good health and well-being. Recognized for innovative cardiac and neonatal intensive care to advanced stroke and trauma treatment, the outstanding doctors at DMC represent most major medical specialties and are committed to being there for you, when you need them most. We offer competitive salaries and benefits including a matching 401(k), several health & dental plans to choose from, generous tuition assistance plans, and relocation assistance for select positions. Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services Wellbeing support, including employee assistance program (EAP) Time away from work programs for paid time off, long- and short-term plan coverage Savings and retirement including a 401(k) Plan with a 50% match up to 6% of pay, employee stock purchase plan, flexible spending accounts, retirement readiness tools, rollover support, and financial well-being counseling Education support through tuition assistance, student loan assistance, certification support, and online educational program Additional benefits life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection, and employee discount program Registered nurses - Retirement medical benefit account (RMBA) - 2% of annual eligible income set aside in accordance with program guidelines Benefits may vary by location and role Relocation package offered for this position ************************* Summary Reporting to the Director of Imaging Services and/or designee, the Diagnostic Imaging Technologist is responsible for radiological care to patients of all ages, for the purpose of diagnosis and/or treatment of anatomical and physiologic disorders using ionizing radiation. Must have working knowledge of conventional Radiology. Must be able to operate all X-ray equipment and PACS. Prepares exam room, equipment, supplies and medications for patient's procedures and is responsible for patient education. Proven competency in addition to conventional radiography, working knowledge in at least one other area CT, MRI, or Interventional Radiology if applicable competencies are met. May be required to take call. BLS ARRT( R ) CRT Fluoroscopy permit required Sign on bonus doesn't apply to internal applicants #LI-KB6 Tenet complies with federal, state, and/or local laws regarding mandatory vaccination of its workforce. If you are offered this position and must be vaccinated under any applicable law, you will be required to show proof of full vaccination or obtain an approval of a religious or medical exemption prior to your start date. If you receive an exemption from the vaccination requirement, you will be required to submit to regular testing in accordance with the law. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. Tenet participates in the E-Verify program. Follow the link below for additional information. E-Verify: ***************************** The employment practices of Tenet Healthcare and its companies comply with all applicable laws and regulations. ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

We're looking for Auto Interior Repair/Glass Repair Technicians with a minimum of 3 years of professional automotive interior repair and/or glass repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Mid-Level Interior Repair/Glass Repair Technician, you'll be expected to be highly skilled in interior repair and glass repair including: Repairing damaged cloth/fabric, leather, plastic, vinyl, and other upholstery Repairing center consoles, seats, dashboards, headliners, plastic, and stitching Color matching/dying cloth and fabric Repairing stars, bullseyes, combination breaks, cracks, and scratches in windows/windshields At Carvana, you'll receive a competitive wage and amazing perks - including a 401(k) with Carvana match and even a vehicle purchase discount - all while using state of the art tools in one of our high-tech Inspection Centers ( click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job 100% company-paid healthcare premiums Generous paid-time off and your birthday is a holiday! ASE and tool reimbursement programs Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) ###-####, Monday through Friday, between 6 AM and 4 PM MST (9AM to 7PM ET). Not a match for this role? We have a variety of paint roles available, depending on your experience - look below to see other roles available to help us get our low-mileage, late-model cars ready for our customers: Paint Prepper (min 6 months professional experience): prepare vehicles for cosmetic paintwork, including sanding, masking, taping, bagging, unbagging/tear down, and buffing Entry-Level Painter (min 1 year professional experience): prime vehicles and perform final sanding before the vehicle is painted, along with buffing, touch-up, paint mixing, and airbrush. Mid-Level Painter (min 3 years professional experience): match/mix paint color and use water-based paint to paint the vehicle inside our paint booths Experienced Painter (min 5 years professional experience): painting (base coats, tri-coats, solid, metallic, and clear coats), blending adjacent panels, and paint correcting vehicles. We also have a variety of other automotive roles available in one of our 17 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles Auto Technician/Mechanic roles: LOF (Lube, Oil, and Filter), Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles Entry-Level roles: Detailing, Inventory Associate (Lot Attendant), Photobooth, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Title: Opto-Mechanical Assembly Engineer / Technician (1st and 2nd Shift) Work Schedule: On-site Rate: $36, Based on experience. Shift: Monday - Saturday 06 AM - 03:30 PM 03 / 04 PM or 12:30 - 02:30 AM (OT required) OT required on Saturday's Responsibilities: • Maintain tool schedules, complete alignment processes (milestones) per defined test times - work assignments that are moderately complex in nature where judgment is required in resolving problems • Support tool progression priorities -tests and troubleshoots assemblies and/or final systems • As required, prepares technical reports summarizing findings and recommending solutions to technical problems Additional Responsibilities: • Maintain test tooling, sending/receiving tooling to complete daily work activities (3rd party calibration) Top 3 Skills Needed: 1. Mechanical experience - hands-on mechanical work is essential. 2. Optical alignment experience - highly preferred. 3. Commitment for long-term - ability to work extended hours and sustain workload. Work Schedule: • 6 days/week (Monday-Saturday) • 10+ hours/day • Long-term engagement expected. Qualifications: • Minimum High School Diploma • At least 1 year of relevant experience (mechanical/optical) • Interview process will assess knowledge and skills. Interview Process: • 3 rounds in one day (~1.5 hours total): • Mechanical test • Written test • One-on-one interview Industry Preference: • Candidates from aeronautics or medical devices are good fits. • No fiber optics experience required. Requirements: • Performs the build, calibration, testing and troubleshooting of mechanical assemblies at a system level. • Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams. c. • Tests and troubleshoots assemblies and/or final systems. • May complete rework on assemblies and/or systems as a result of testing. • Prepares technical reports summarizing findings and recommending solutions to technical problems. May assist in the selection and set-up of specialized test equipment. • Requires experience in testing digital and/or analog systems • Ability to read complicated drawings, mathematics, handbook formulas, and a variety of testing and measuring instruments • An AA degree, military technical training or their equivalent vocational training is a +. • Will accept HS diploma with equivalent experience • Lift 50 lb requirement EXPERIENCE: • Typically requires a minimum of 2 - 4 years of related experience. • Looking for a person with strong mechanical, electrical and software skills. • NOT looking for PCB experience/ board TS. • More opto assembly BIG system level. About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Manish Rajput (****************** / *************** for more details.

Job Title: Field Services Engineer Department: Network Operations Reports To: VP of Network Strategy and Development Sovato is a healthcare innovation company redefining how surgical care is delivered globally. By leveraging cutting-edge technologies we are building the future of remote robotic surgery, eliminating traditional geographic limitations and expanding access to high-quality surgical care. Position Summary As a Field Services Engineer at Sovato, you will play a critical role in ensuring the performance, reliability, and scalability of the network infrastructure that powers Sovato's remote surgical platform. This is a hands-on, operations-focused role responsible for the fulfillment, installation and ongoing maintenance of our surgical grade network. You will contribute directly to Sovato's mission by ensuring equipment in the field is tuned and functionality throughout its lifecycle-enabling life-saving care to be delivered virtually and globally. Key Responsibilities Site Development Assemble and configure kits of components for installation at customer sites. Conduct testing and labeling of kit components prior to delivery. Coordinate the installation and activation of circuits and equipment. Travel to customer sites to perform installations, testing, and acceptance procedures. Document field conditions and maintain a catalog of site artifacts. Incident Management & Troubleshooting · Collaborate with the Sovato Network Operations Center (NOC) and support teams to troubleshoot production issues. · Assist in root cause analysis and documentation of network outages or degradations. · Provide field support for ongoing maintenance and troubleshooting activities. · Ensure site artifacts are maintained throughout the site lifecycle. Technical Support & Collaboration Deliver customer-facing technical support with a focus on responsiveness and empathy. Collaborate with NOC, engineering, and product teams to continuously improve solution capabilities. Contribute to technical knowledge bases and operational playbooks. Customer Experience & Field Readiness Ensure that all communications-verbal and written-are clear, professional, and reflect Sovato's commitment to excellence in patient care. Engage with end users and clinical stakeholders to ensure a seamless technical experience. Network Operations & Monitoring Leverage network monitoring tools to analyze performance and conditions, assist support team with pro-active event identification/resolution Maintain up-to-date documentation of network performance and incidents. Required Qualifications Bachelor's degree in Engineering, Computer Science or related field 2+ years of experience supporting enterprise or carrier-grade network environments. 2+ years of field services/engineering experience in a customer-facing role Technical Skills Proficiency with: Networking configuration and management Firewalls and security appliances (FortiGate) Layer 1-7 network protocols and troubleshooting Exposure to Arista switches and software-defined networking (SDN) concepts Soft Skills Customer service oriented. Strong analytical thinking and attention to detail. Excellent communication and interpersonal skills; able to explain technical concepts to non-technical audiences. Self-starter with the ability to work both independently and as part of a distributed team. Physical & Travel Requirements Ability to lift and install networking equipment (up to 50 lbs), climb ladders, and work in field environments. Willingness to travel up to 75% for deployments, training, or onsite support-both within the U.S. and internationally. Why Join Sovato? Shape the future of surgery by enabling remote access to life-saving care. Be part of a pioneering team at the intersection of healthcare and technology. Competitive compensation and benefits package, including medical, dental, vision coverage, and travel opportunities. Equal Opportunity Statement Sovato is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and do not discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, veteran status, or any other characteristic protected under applicable federal, state, or local laws.

A leading patent consulting firm in San Francisco is seeking a Patent Agent or Associate. The role requires a degree in engineering or related fields, registration to practice before the USPTO, and a law degree for attorneys. Candidates should be confident in discussing technical details and comfortable engaging with prominent tech companies. This position offers opportunities across various fields, including AI and clean energy. #J-18808-Ljbffr

We are seeking a dedicated and skilled Field Service Engineer to join our team. In this role, you will be responsible for providing on-site support and maintenance for battery energy storage systems (BESS). The ideal candidate will possess a strong background in battery system maintenance and be proficient in troubleshooting and repairing energy storage systems. Your expertise will ensure the reliability and efficiency of our operations while delivering exceptional service to our clients. Duties Perform routine inspections, maintenance, repairs, and replacements on battery storage units in the field. Troubleshoot and diagnose issues related to low voltage communication and high voltage energy storage units using computer software, multimeters, etc. Install components such as batteries, inverters, and power regulation equipment according to project specifications and safety codes. Commission systems to ensure compliance with performance and safety standards. Collaborate with team members to develop solutions for complex technical challenges. Communicate effectively with clients to provide updates on service status and recommendations. Document detailed records of system installation, operation, used parts, and maintenance activities. Collaborate with project managers and engineers to complete other related tasks. Qualifications Bachelor's degree with 0-5 years of experience in Electrical Engineering or a related field. Strong understanding of low voltage communication systems and high voltage utility power systems. Valid driver's license. Proficient in using electrical tools such as multimeters. Able to lift up to 50 lbs, climb stairs and ladders, and work outdoors. Responsible and willing to travel for at least 75% of work time. Ability to communicate effectively in English, both verbally and in writing. Nice to have but not required Experience with BESS and inverters. Background in commercial and industrial utility systems. Able to communicate in Mandarin. It's a contract role with high possibility to extend to full-time. We are happy to offer sponsorship for our full-time employee.

We are seeking a skilled and proactive Data Center Hands & Feet Resource to provide Level 2 (L2) support within our data center operations. This role involves advanced hardware diagnostics, coordination with vendors for repairs, inventory management, and support for remote troubleshooting efforts. The ideal candidate will have a deep understanding of data center infrastructure and be capable of handling escalated technical issues efficiently. Key Responsibilities - Perform advanced diagnostics and troubleshooting of server, storage, and network hardware. - Coordinate and oversee vendor repairs and maintenance activities within the data center. - Manage and maintain accurate inventory of hardware components and spare parts. - Support remote teams with hands-on tasks including hardware replacement, cabling, and system reboots. - Ensure compliance with data center operational procedures and safety standards. - Document all activities, incidents, and resolutions in the ticketing system. - Assist in capacity planning and infrastructure upgrades. - Participate in on-call rotations and respond to escalated incidents promptly. Required Skills & Qualifications - Strong understanding of data center operations and infrastructure components. - Hands-on experience with server, storage, and networking hardware. - Ability to perform advanced hardware diagnostics and troubleshooting. - Experience coordinating with hardware vendors and service providers. - Proficiency in inventory management and asset tracking tools. - Familiarity with remote support tools and procedures. - Excellent documentation and communication skills. - Ability to work independently and handle escalated issues effectively. Work Environment This role is based in a physical data center environment and may require lifting and moving equipment. The candidate should be comfortable working in a fast-paced, high-availability setting and be willing to participate in rotational shifts and on-call duties. HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. A candidate's pay within the range will depend on their skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

As an Engineering Technician, you'll assemble and maintain test systems, support vehicle engineering tests, and collaborate with engineers and technicians to ensure high-quality results. Responsibilities Wiring, low voltage (12v) Maintain and troubleshoot test equipment to minimize downtime. Assemble mechanical structures and prototype wiring per documentation. Perform light fabrication using machining, shop, and hand tools. Document faults, maintenance, and upgrades. Support vehicle tests such as powertrain durability, endurance, transmission abuse, and environmental systems. Transport vehicles and equipment; assist with test prep and driving on tracks and public roads. Communicate issues and provide feedback on equipment and test performance. Maintain a clean, safe workspace and follow safety regulations. Minimum Qualifications 3+ years of hands-on technical/wiring experience. Strong mechanical assembly and troubleshooting skills. Ability to lift 45 lbs and use hand tools. Excellent communication and organizational skills. Preferred Qualifications Experience with electrical harnesses and cable connections. Familiarity with hazardous material handling. Knowledge of CAN/LIN protocols. Experience with Jira, SharePoint, and Confluence. Background in vehicle systems-especially electric vehicles-or robotics. Experience with Advanced Driver Assistance Systems (ADAS) and thermal systems. Rate: $35-$40/hr

Do you thrive in hands-on environments where precision and problem-solving matter? Are you excited by the idea of testing cutting-edge satellite hardware to ensure it survives the extreme conditions of launch and space? Join our team as an Environmental Test Technician and play a critical role in shaping the future of space technology. Why this role matters As part of our fast-paced engineering and test operations team, you'll be on the frontlines of ensuring spacecraft components can withstand vibration, shock, thermal vacuum, and other demanding spaceflight environments. Your work directly contributes to the reliability and success of satellite missions that push the boundaries of what's possible in orbit. What you'll do Run real-world space simulations: Set up and operate vibration tables, shock machines, and environmental chambers to put hardware through rigorous launch and in-space conditions. Instrument like a pro: Wire up satellite components with accelerometers, load cells, and strain gauges for accurate test data collection. Get hands-on with data: Record, analyze, and troubleshoot test results-helping engineers solve complex issues before hardware ever leaves Earth. Keep our labs mission-ready: Perform maintenance, calibration, and upgrades on high-tech equipment, ensuring every test is precise and safe. Be part of the build: Support assembly, integration, and test (AI&T) activities alongside a multidisciplinary team of engineers and technicians. What we're looking for 2+ years of hands-on experience in vibration, shock, or environmental testing (aerospace preferred). Strong mechanical aptitude and troubleshooting skills-you enjoy solving problems with both your head and your hands. Familiarity with test standards (MIL-STD-810, NASA GEVS) and proficiency with vibration test controllers. Ability to read technical drawings and operate DAQ systems. Comfortable lifting up to 35 lbs and performing physical tasks in a lab/test environment. Bonus points if you have: Thermal vacuum (TVAC) or burn-in test experience. Skills with oscilloscopes, multimeters, or harness fabrication. Forklift/crane experience or soldering skills. What's in it for you Be at the forefront of space exploration and satellite technology. Work with state-of-the-art equipment in a world-class test lab. Collaborate with passionate engineers and technicians who value precision and teamwork. Competitive compensation, benefits, and opportunities for growth in a rapidly advancing aerospace company. Ready to test the limits of space hardware? If you're detail-driven, love working with advanced equipment, and want your work to make a real impact on space missions, this is your chance. Apply now and help us launch the next generation of aerospace innovation.

JOB TITLE: Field Service Technician Associate SCHEDULE: Standard Office Hours DURATION: 12-Month Contract PAY RATE: $14/hr We are seeking a Field Technician to support telecommunications network operations, specifically fiber optic transmission systems. This role involves equipment installation, maintenance, troubleshooting, and site oversight, ensuring customer requirements and network standards are met. The technician will work closely with senior staff and contractors to maintain and repair electronic components, with opportunities to gain hands-on experience in telecom infrastructure. Key Responsibilities Install, maintain, and troubleshoot fiber optic transmission equipment, including lightwave multiplexers, digital multiplexers, channel banks, circuit termination equipment, and DC power systems. Replace defective modules and track spare parts inventory. Perform preventative maintenance and maintain technical documentation. Maintain site security and cleanliness. Assist senior technicians in learning procedures for process and operations. Read and follow service orders and basic circuit diagrams. Qualifications / Relevant Experience High School Diploma or equivalent required. 0-5 years of field experience in telecommunications or electronic equipment maintenance. Working knowledge of personal computers, common software, and Sonet and Ethernet systems. Basic ability to read circuit diagrams and service orders. Willingness to learn and work under supervision of senior technicians. ...

Qualifications: · Physical layer: fiber optic connections, contamination, cleaning · Understand ESD best practices · Comfortable with text based CLI · Familiar with IP based networking · A+/Network+ level of knowledge required · Good understanding of OSI layer and network principles · 2+ years of DC experience required · 4+ years of IT related experience required · Familiarity with the Linux based systems and experience with scripting and automation (Bash, Python, Perl) · Understanding BGP routing protocols, spanning tree, VRRP, LACP · Good organization, multitasking and communication skills · Microsoft Office Tools: Word, Outlook, Excel · Understanding of network procedures, environmental and safety management in a DC environment Responsibilities: · Physical hardware swaps: (Fabric and Backbone) o Optical transceiver swaps / Circuit diagnosis o Line card swap o TOR Replacement o Work with vendors for RMA's o Must be able to lift 50lbs · Asset Management · Tools and Ticket management · Build relationships with partner teams within the DC · Ability to review hardware logs, isolate and identify root cause · Remote link troubleshooting · Ability to mentor and guide L1 resource

at General Parts Group Now Hiring: Field Service Technician - Yuma, AZ*Up to $6,000 Sign-On Bonus for Experienced Candidates!General Parts is looking for a skilled Field Service Technician to repair and maintain commercial kitchen equipment in schools, healthcare facilities and restaurants throughout your area.Pay & Benefits:💲 $20-45/hr (based on experience) with growth opportunities🚗 Company vehicle - dispatched from home📚 Ongoing training & career advancement✅ Great benefits - PTO, 401(k) match, profit sharing, medical, dental, and more!What You'll Do:🔧 Troubleshoot, repair, and maintain commercial cooking, refrigeration, and HVAC equipment👷 Provide service solutions for gas, electric, and steam systems🛠 Order and install replacement parts📞 Participate in after-hours & weekend on-call rotations Why Join Us?🛠 Fully equipped - service vehicle, tools, tablet, cellphone, uniforms, and paid laundry📈 Advancement - CFESA certification & ongoing training provided💰 Extra earning potential - Overtime (Saturday), Double-Time (Sunday & holidays) What We Need:✔ Valid driver's license and driving record that meets our safety standards✔ Completion of a criminal background check and drug screen✔ 2+ years of related experience, education, or military training preferred✔ EPA certification (for refrigeration techs)✔ Strong mechanical aptitude & ability to lift up to 50 lbs✔ Must be at least 18 years of age General Parts Group is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.* Sign-on bonus available for select roles and candidates, based on hiring manager discretion and business needs. Not all hires will be eligible.

The Electronics Technician, Maintenance maintains repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required, from supervisor or higher-level technician. VETS is an EEO Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, or disability. VETS is a SBA certified Service-Disabled Veteran-Owned Small Business (SDVOSB). Based in Ashburn, Virginia, VETS has a Southwest operations office in Sierra Vista, Arizona and contract management sites throughout the United States. VETS supports a growing number of U.S. Government defense and civilian agencies with technology, systems engineering, as well as construction and program management support services.

Who We Are Over the last 80+ years the General Parts Group has grown to become one of the largest Foodservice Equipment Support companies in the US. Our award-winning service department currently supports a field service force of over 200 technicians, providing service in 26 states throughout the USA. General Parts Service Technicians are encouraged to pursue CFESA training certifications, and many hold a ‘Master Certification' designation, the highest level of achievement. Our team provides service, repair, and maintenance for cooking, refrigeration, beverage, HVAC and ware washing equipment. We stand ready to meet the ever-changing needs of our customers. Why Work for General Parts? While we are customer driven, we are also employee oriented. Our high employee retention rate and continuous investment in training ensures that we respond to our customers' needs with the most qualified and professional people in the industry. Position Summary The Field Service Technician is responsible for traveling to restaurant locations to diagnose, repair, and maintain commercial kitchen equipment-including hot-side appliances, refrigeration units, and light HVAC systems. This role requires operating a company vehicle safely, delivering prompt and reliable service, and ensuring minimal downtime for restaurant operations. The technician must provide exceptional customer support, communicate clearly with kitchen and management staff, and work independently with little supervision. We value your hard work and are proud of our competitive pay for performance philosophy. The hourly rate ranges from $35-$50 hourly, depending on experience. We're Excited if this is You! What We Need From You: Must be at least 18 years of age Minimum 1 year of commercial kitchen, refrigeration, or HVAC experience preferred Completion of a satisfactory background check and drug screen Valid Driver's License and Driving Record that meets our safety standards EPA Certification Required for Refrigeration Techs Proficiency in Microsoft Outlook iPad Use & Familiarity Join our Team and Enjoy Amazing Benefits! Competitive Compensation Comprehensive Health Coverage 401(k) Plan with Company Match Healthy Work & Life Balance CFESA Certification & Ongoing Training for Your Future Company Service Vehicle, Tools, Apple Tablet, Cellphone, Uniforms, and Paid Laundry Extra Earning Potential with Overtime (Saturday) & Double-Time (Sunday & Holidays) Take part in our Town Shares Program - Share in our company's success! General Parts is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description ******************** About the Role: We are seeking a highly skilled Field Service Engineer to join our team. As a Field Service Engineer, you will be responsible for ensuring the proper functioning of our equipment and systems at customer sites. Your main objective will be to provide preventive maintenance, troubleshoot and repair any issues that arise, and ensure customer satisfaction. You will be working closely with our customers to understand their needs and provide them with the best possible solutions. Your work will directly impact the success of our company and the satisfaction of our customers. OVERVIEW Position: Field Service Engineer Direct superior(s): Regional Support Manager (US), Weibel Equipment, Inc. Function: Skilled Organizational Level: 3 Department: AFM Weekly working time: Full time Managerial responsibilities: None Edition valid from: 12-01-2025 Replaces edition: 01-01-2024 MAJOR TASKS AND RESPONSIBILITIES Support for Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) and the associated activities, such as pre-FAT, installation, system testing, pre-SAT, project meetings, reporting, document editing, etc. All types of service delivery (e.g. preventative and corrective maintenance), on-site at customer location and at Weibel. Operational and Maintenance Training to customer personnel. Carry out root cause analysis on equipment failures and recommend corrective actions Direct customer contact; in-person, by telephone and electronic communication. The position can include extensive travel for field assignments (typically 100-150 business travel days per year). Tasks and processes (not prioritized) Support Acceptance Test Manager Support planning and performing FAT and SAT, including associated documentation such as Acceptance Test Plans, FAT Protocol, SAT Protocol. Customer support. In person, by telephone and electronic communication Incident handling and repair, in field or at Weibel, including: Failure analysis Repair Testing Documentation and reporting Maintenance, in field or at Weibel. Upgrades, in field or at Weibel. Training classes, in field or at Weibel. Mission support, in the field or from Weibel. Installation and commissioning Administration as documentation and reporting, ERP entries, etc. Participation in project groups EMPOWERMENT Decisions Made by Employee Planning and prioritization of assigned tasks On-the-spot field decisions and problem solving not having impact on contractual status Decisions to be approved by manager Decision with impact on contractual status Travel Purchases Task/location assignments RELATIONSHIPS ( persons and/or groups that are critical for cooperation and communication ) External: Customer and business partners (agents, system integrators, vendors, associations, etc.) Internal: PRJ (projects), TEC (development/engineering), OPS (production), Sales, BD (business development) COMPETENCIES (prerequisites for having success in the employment; skills, experience and attitudes ) Education: Technical education at minimum-level associate's degree ( two-year technical college degree or equivalent ) Technical, electronic craftsman education or radar operator education combined with technical (electronics) aptitude Trade/technical competencies and experience including managerial competencies ( if applicable ): Deep insight into electronic technology and usage Experience with radar technology, preferred not required Personal competencies: The position requires a high level of self-drive and ability to handle unforeseen issues autonomously. Requires competence as trainer/presenter, a likable character, and the ability to bond easily with customer representatives with the understanding and capability to work with different geographical cultures. Further requirements: Result-oriented Customer satisfaction focus Orderly and structures in work Analytical Detail-oriented String drive and energy Self-motivating Autonomous whilst observing organizational requirements Strong communicator Relationship builder Flexible with working time IT and languages: English at professional level (oral and written)

Troubleshoot and repair various electrical mechanical rotating equipment based on your skillset and mechanical aptitude. **Job is located in Phoenix, AZ and you must be able to relocate. Relocation package available.** Essential Duties and Responsibilities: Understand and follow all Safety processes and procedures including the use of required PPE (Personal Protective Equipment). Read job cards to determine: Job status, work authorization/limitations, estimate, description of problems and/or work scope. Test electro-mechanical rotating equipment to troubleshoot known or suspected problems using various testing methods (AC/DC). Below are some examples. 3 phase motors DC motors Single phase motors Magnetic clutch units Gearboxes/Transmissions Generators and/or Alternators Compressors and Lobe Blowers Name brands examples Motors - ABB, Baldor/Reliance, Ideal, Louis Allis, Siemens, US Generators - ABB, Siemens, EMD of GM, Vestas Gearboxes - Reliance, Cone Drive, Eurodrive Compressors - Sutor Built, Carrier, Trane Disassemble equipment noting parts identification, configuration and condition. Ability to operate grinders, drills, cranes, forklift trucks, torches, cut off saws etc. Clean equipment assemblies as needed through various methods and steps, including but not limited to parts washers, steam cleaners and sand blasters. Measure for and note proper replacement parts while correctly submitting a requisition for the needed items. Replace or repair worn or defective mechanical or electrical parts and assemblies, included but limited to: Brushes, bearings, brush holders, gears, seals, impellers, mechanical switches, brakes, clutches, tachometers, fans, etc. as required per the ISS technical traveler. Test repaired apparatus for proper output and/or operation as per ISS or customer specifications. Complete required paperwork for each job accurately and on a timely basis. Operate specialized repair and testing equipment. Multi-Meter - Used for checking continuity , capacitor testing, diode testing Megohm Meter - Used to test insulation resistance Surge Tester - Used to detect insulation breakdowns between circuits. Hi-pot Tester - Used to detect amount of current leakage through insulation Motor Test Panels - Testing apparatus at rated voltages for proper operation before and after repair Balance of various types of rotating equipment including but not limited to fans, rotors, armatures, rolls, impellers, blowers, etc. Using IRD and /or Dynamics balancing machines. Keep work area Safe, clean, and organized. Perform all other duties as assigned by the Production Manager. Qualifications: High school diploma or GED is required. Trade school, vocational/technical school, military, or on-the-job technician training and/or certifications is preferred. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Valiant Integrated Services is looking for an experienced Electronics Maintenance Technician 1 to join our professional team at MCAS Yuma, Arizona providing support to the Marine Corps AV-8B Harrier Simulators. General Description: The (Simulation) Electronics Maintenance Technician 1 will work at the Marine Aviation Training Systems Squadron (MATSS) and will perform maintenance on the AV-8B (Harrier) Simulators and related apparatuses, computers, classrooms or any similar duties as directed by the supervisor. Typical duties (non-inclusive): The (Simulation) Electronics Maintenance Technician 1 will initialize and prepare systems including startup and shutdown procedures; ensure accuracy of exercise data; maintain system logs; perform troubleshooting of the simulators, interfaces, networks, connectivity or systems and assist with correcting all deficiencies. On an ongoing basis, the Technician will safely perform organizational and preventive maintenance on projectors, computers, lighting systems, and other electronic devices as instructed. The Technician will perform additional duties as directed and learn new systems as required; may assist with building simulation scenarios and make modifications to scenarios. The Technician will keep shift supervisor and/or site manager appraised of training devices status and any on-going logistics efforts. S/He will perform inventories as required; perform janitorial services on assigned spaces; and will work mornings, evenings and some weekends as specified by the customer. Qualifications: Minimum Qualifications: · Proficiency in one of the following operating systems: LINUX, Windows, UNIX, or Solaris. · 3 years of experience in Avionics Maintenance; OR Electronic Component troubleshooting and repair; OR Computer Network troubleshooting and repair; OR graduation from a two-year Electronics Technician course at an accredited technical institute or college; OR any education and experience that demonstrates the candidate's ability to work in a highly technical environment and perform the duties required. · Valid CompTIA A+ certification (or obtained within 6 months of hire as a requirement). · Ability to obtain and retain a SECRET DoD Clearance through a security investigation. Desired Qualifications: · 5 years of Avionic Maintenance in a Military Type Aircraft · OR 5-years of experience with military exercises integrating live-virtual-constructive training · AND one or more of the following certifications: A+, Network+, Linux+, Security+, CCNA, MCSA, MCSE, or an Associate's degree or higher in Information Technology, Computer Science or related field. · Active SECRET or higher clearance. Additional Requirements: Requires mental alertness and ability to follow written and verbal instructions given in English. Physical ability to walk, stand, and/or sit for extended periods of time, and to climb 2 flights of stairs. Must be able to lift and carry 75 pounds. Must present a professional appearance in demeanor and dress at all times. The applicant must be a US citizen and must have and maintain a valid driver's license. Ability to work a flexible and dynamic schedule with minimal notice. Applicant will be subject to a government security investigation and must meet eligibility requirements to receive and retain a SECRET clearance for access to classified information.

Apply now Job Title: PHOE FIELD SERVICE REP PT Division: Distribution Posting Area: Field Service Reps What we bring on: $240 per week per