EMCOR Group jobs in Raleigh, NC - 384 jobs

**About Us** We perform installation, rigging, millwrighting, and maintenance for manufacturing and industrial markets across the Southeast. **About us:** Since 1962, Southern Industrial has helped install and maintain the manufacturing and industrial base that has fueled growth across the Southeast. We have grown from a Carolinas-based rigging company into the leading provider of rigging services, turn-key industrial construction, and plant maintenance services in the Southeast. As part of EMCOR Group, Southern Industrial's ability to serve our customers is enhanced by EMCOR's financial strength and national presence. **Job Title:** SIC Civil Heavy Equipment Operator (RAL FUJI RM) **Job Summary:** Southern Industrial is looking for Civil Heavy Equipment Operator for a project in Holly Springs, NC. Candidate needs to have experience operating a skid steer and mini excavator. Hired candidates will be considered for Benefits/Paid Time Off after 3-months. **Essential Duties and Responsibilities:** + Establish building lines and control points from constructions drawings. + Construct formwork and grade rod vertically and horizontal in proper alignments. + Create control joints, Molds expansion joints and edges using a concrete saw, edging tools, jointers and straight edge. + Install reinforcing steel and embeds according to construction drawings. + Tie rebar, wire mesh and all support structures. + Place concrete from a chute, Georgia buggy or a pump. + Spreads concrete to specified depth and workable consistency, using float to bring water to surface and produce soft topping. + Levels, smoothes, and shapes surfaces of freshly poured concrete, using straightedge and float or power screed. + Finishes flat and sloped concrete surfaces, using power trowel, or wets and rubs concrete with abrasive stone to impart finish. + Operates soil compaction equipment and concrete vibrator. + Removes rough or defective spots from concrete surfaces, using power grinder or chisel and hammer, and patches holes with fresh concrete or epoxy compound. + Application of concrete surface treatments, curing compounds and coatings. + Direct sub grade work, mixing of concrete, and setting of forms. + Follow set procedures and standards. + Rate information using standards that can be measured or checked. + Detect, recognize and respond to dangerous conditions or situations. + Regular attendance is required. + Significant travel may be required. + Performs other duties as required. **Qualifications & Skills:** + Skilled in both written and verbal communication. + Complete all Safety and general job training as required by SIC. + Observe SIC and Customer safety and quality processes and procedures at all times. **Physical Requirements/Job Site Requirements:** + Must be able to effectively use all required PPE equipment and lift up to fifty pounds. + Conditions include working in office, shop, busy traffic areas, warehouses, and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. + Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as, confined spaces. + Strenuous physical demands are required to safely perform the essential functions associated with this position. + Must be able to safely operate all involved equipment and tools. + Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats, and working in awkward body positions. **_Notice to prospective employees:_** There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companieslist open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=) **.** Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. **As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we** **offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled.** **\#SIC** **\#LI On-Site** **\#LI-VB1** **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-NC-Raleigh_ **ID** _2025-1757_ **Company** _Southern Industrial Constructors, Inc._ **Category** _Operations Services_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _3 months ago_ _(10/14/2025 1:00 PM)_

If you are a Senior Sales Professional looking to grow your career, Emerson has an exciting opportunity for you which can be remotely based in the United States. As the Strategic Account Executive, you will be responsible for growing revenue in the Data Center Power Generation and Microgrid markets. This position will focus on attracting new customers, growing market share and developing strong industry relationships. This position will supplement the local sales team to drive greenfield control system orders across North America in the Data Center Power Generation industry that ensure reliability, efficiency and scalability. This position is a part of the Emerson Power & Water Solutions business based in Pittsburgh, PA. Position will be remote with strategic geography considered. Power & Water Solutions is an industry-leading controls automation company that focuses on providing applications in the renewable (solar, hydro, wind), fossil (natural gas and coal) power generation, and water treatment plants sectors. We focus on upgrading existing plant control systems with industry-leading automation controls and instrumentation to promote the sustainability and longevity of our North American power grid and wastewater infrastructure. **In this Role, Your Responsibilities Will Be:** + Develop new customer accounts that are providing power plants for data centers, including EPCs, investors, MEP's, Hyper Scalers, Operation & Maintenance companies and end users. + Promote and sell the Ovation Platform and other Emerson applications for power plants and microgrids, aligning solutions with customer needs and project requirements + Actively engage potential customers to understand their business objectives, needs, and pain points. Then provide appropriate solutions using the Emerson Portfolio. + Develop, execute, and communicate strategic account plans to penetrate new markets and grow share in the data center energy segment, short and long term + Capable of building and maintaining strong relationships with a diverse set of internal and external constituencies including C-Level executives, senior-level decision makers, technical teams and successfully navigate the procurement process. + Create and deliver technical presentations to prospective clients + Identify and recommend account strategies through territory business analysis + Negotiate technical and commercial issues to close orders + Provide concise industry updates, competitive differentiation and pricing strategy to executive-level management + Maintain Customer Relationship Management (CRM) tool + Participation in select professional meetings, trade shows, and conferences as a representative of Emerson **WHO YOU ARE:** You adjust communication content and style to meet the needs of diverse collaborators. You serve as a strategic partner to build, grow, and maintain profitable and long-lasting relationships with key accounts. You honor commitments and keep confidences. **For This Role, You Will Need:** + Bachelors degree, or equivalent + Demonstrated experience breaking into new accounts and establishing vertical and horizontal relationships + Ability to travel up to 60% annually within the United States and Canada + Legal authorization to work in the United States without the requirement for employer sponsorship or work visas **Preferred Qualifications that Set You Apart:** + Prior experience and relationships w/ Hyper Scale customers (Oracle, Meta, Google, Microsoft, etc.) + Technical degree preferred + Experience in operational technology sales, marketing, operations or related fields applying Control System and Microgrid solutions + Prior Sales experience in the Power industry + Existing relationships within the Industrial Power market including Hyper Scalers, Investor-Owned Utilities, Independent Power Producers, Operators, Developers and EPCs + Prior experience in greenfield operational technology sales, power preferred. + Knowledge of DCS control systems is preferred. + Knowledge of Microgrid (non-grid connected) control systems is preferred. **Our Culture & Commitment to You:** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Our compensation philosophy is simple: We pay a competitive base salary, within the local market in which we operate, and reward performance during the annual merit review process. The total target comp range for this position is $100,000 - 150,000 annually, plus incentive bonus, commensurate with the skills, talent, capabilities, and experience each candidate brings to a role. This position will be open for a minimum of 7 days from the day of posting. Applicants are encouraged to apply early to receive optimal consideration. In compliance with the Colorado Job Application Fairness Act, in any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. \#LI-SD1 \#LI-Remote **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25029839 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

As a Multi-Craft Maintenance Technician, you'll be responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment. Your work will follow safety, predictive, and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. This role requires expertise across multiple disciplines-mechanical, electrical, hydraulic, pneumatic, and fabrication-while ensuring compliance with OSHA and NFPA 70E standards. You may be required to work overtime, respond to after-hours call-ins, and assist in other maintenance areas as needed to keep operations running smoothly. A Day In The Life * Review work orders and prioritize tasks for scheduled and emergency maintenance. * Provide emergency/unscheduled repairs of production equipment during active production to minimize downtime. * Perform scheduled maintenance during machine service, including inspecting drives, motors, belts, checking fluid levels, and replacing filters. * Diagnose problems, dismantle devices using hoists, cranes, and tools, and repair or replace defective parts. * Service, adjust, and test machines, moving parts, and equipment using precision instruments and electrical/electronic testing devices. * Execute fabrication tasks, including machining and general design and fit for custom parts. * Conduct mold changes and repair electro-mechanical equipment as needed. * Read and interpret equipment manuals, blueprints, schematics, and ladder logic to perform required maintenance. * Document all work performed and recommend improvements in maintenance and operational procedures. * Train new maintenance team members on all facets of maintenance operations. * Maintain a clean, safe work environment and report any hazards, accidents, or incidents promptly. * Be prepared for overtime work, after-hours call-ins, and assisting other maintenance areas when necessary. What will help you thrive in this role? * Technical Mastery: Strong skills in mechanical and electrical systems, welding, machining, pipe fitting, and PLC troubleshooting. * Problem-Solving Skills: Ability to diagnose complex issues using diagnostic tools and interpret schematics and ladder logic. * Safety First: Commitment to OSHA guidelines, NFPA 70E compliance, and proper PPE usage. * Flexibility: Willingness to work overtime, respond to after-hours calls, and support other maintenance areas as needed. * Physical Readiness: Ability to lift up to 35 lbs alone (or 70 lbs with assistance), climb, and work in varied conditions. * Experience & Education: High school diploma or GED required; certifications in mechanical, electrical, pneumatic, hydraulic systems, and PLC training preferred. Several years of industrial maintenance experience strongly desired. * Leadership & Initiative: Willingness to train others and recommend process improvements to enhance efficiency and safety. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

**Requisition ID:** 177487 **Job Level:** Senior Level **Home District/Group:** Southeast District **Department:** Estimating **Market:** Transportation **Employment Type:** Full Time We are actively inviting a highly skilled and experienced **Lead Estimator** to join our dynamic team, specializing in heavy civil infrastructure projects. This pivotal role is designed for a professional with 8-12 years of demonstrated expertise in estimating large-scale civil construction projects. The successful candidate will excel in delivering precise and comprehensive cost estimates, driving bid strategy, and leading preconstruction planning to support complex infrastructure initiatives such as bridges, tunnels, highways, dams, and transit systems. This position offers a unique opportunity to contribute to major projects that shape and enhance vital public infrastructure while advancing your career within a reputable and innovative organization. **District Overview** Kiewit's Southeast District specializes in heavy civil, transportation and water resource markets, and has played a significant role in building infrastructure throughout the fast-growing southeastern United States. Since the 1970s, we have built projects from Maryland to Florida and west to Louisiana. Our operations include highways, airports, mass transit, tunnels, water and wastewater facilities, dams and infrastructure work. **Location** This position offers multiple office locations across the Southeastern U.S., including Florida (Fort Lauderdale, Orlando, Tampa), Georgia (Peachtree City), North Carolina (Raleigh), and South Carolina (Charleston). These strategic locations provide proximity to key infrastructure projects and enable engagement with diverse teams and clients, supporting flexible and responsive project management. **Responsibilities** + Lead and oversee the development of comprehensive, precise cost estimates for demanding heavy civil projects of significant scale and complexity. + Thoroughly analyze contract documents, plans, specifications, and project requirements to ensure accuracy and completeness of each estimate. + Collaborate closely with multidisciplinary internal teams, including project management, engineering, and procurement, as well as external partners, to align project scope and pricing strategies. + Establish and nurture professional relationships with subcontractors, suppliers, and vendors; solicit competitive bids and critically evaluate proposals to optimize costs without compromising quality. + Present detailed estimates and bid strategies to senior leadership and stakeholders, facilitating informed decision making. + Identify and recommend innovative value engineering opportunities and cost-saving measures to enhance project viability and profitability. + Contribute significantly to proposal development efforts, including responses to requests for qualifications (RFQs) and proposals (RFPs), ensuring competitiveness and compliance. + Mentor junior estimators by sharing expertise, best practices, and providing guidance to foster professional growth and team success. + Ensure all estimating activities comply with company standards, safety guidelines, and industry best practices, promoting a culture of responsibility and excellence. + Travel occasionally to project sites, client meetings, and other relevant locations to support preconstruction efforts and maintain strong stakeholder engagement. **Qualifications** + Bachelor's degree in Civil Engineering, Construction Management, or a closely related discipline strongly preferred. + 8 to 12 years of progressive experience specifically in heavy civil construction estimating, with a proven history of successful project delivery. + Demonstrated expertise in both hard bid and design-build procurement methodologies, showcasing adaptability and comprehensive industry knowledge. + Proficiency with leading construction estimating software tools and advanced skills in Microsoft Excel for data analysis and cost modeling. + Exceptional analytical skills coupled with strong organizational abilities and clear, effective communication skills tailored to diverse audiences. + Ability to operate independently with a proactive approach, as well as collaboratively within a fast-paced, team-oriented environment. + Experience managing self-perform estimating tasks and conducting thorough subcontractor bid comparisons to ensure competitive pricing and value. Preferred Attributes + Deep familiarity with infrastructure projects located in the Southeast United States, including local regulations, market trends, and supply chain networks. + Proven leadership qualities with a track record of mentoring and developing team members, fostering a culture of continuous improvement and knowledge sharing. + A demonstrated passion for infrastructure development with a commitment to long-term career growth within the construction industry. \#LI-MP2 Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

**About Us** We are a full-service mechanical contractor providing customers in the commercial, residential, and industrial sectors with innovative, energy-efficient heating and air conditioning services, automation and controls, industrial piping, new construction design and installation, and maintenance and replacement services. **Job Summary** Newcomb and Company **Essential Responsibilities and Job Duties:** + Notify Commercial Sales of upcoming projects for bid. + Assemble plans, specs and bid dates for projects that will be bid. + Take off materials and equipment from plans and specifications. + Contact suppliers and vendors to get prices on materials and equipment as necessary. + Estimate labor to install all equipment and material per project. + Tabulate total price for project per standard Newcomb & Company calculation procedure and review with commercial sales. Utilize a computerized estimation system (Autobid) when appropriate to take off piping, etc. + Read and interpret project plans and specifications and have a comprehensive understanding of HVAC piping systems including but not limited to air handlers, boilers (steam and hot water), chillers, cooling towers, pumps, heat exchangers, terminal units and humidifiers. + Sizing and lay-out for piping systems and knowledge of pipe, valves and fittings and their appropriate use along with equipment connections and tie-in requirements + Ability to generate pricing/budgets with incomplete drawings by filling in the gaps and understanding overall mechanical intent and requirements for any give system. + Manage multiple bids simultaneously + Follow-up daily / weekly on all outstanding bids. + Assist in obtaining submittals from vendors and subcontractors. + Help generate takeoffs and sketches for the industrial piping manager for final buy list of materials after project award. + Excellent computer skills are essential as the detailed use of Microsoft Word, Excel, Outlook, Autobid and Newcomb & Company's internal computer systems will be a major component of this position. **Physical Requirements:** + Ability to perform additional physical activities that require considerable use of limbs and appendages such as climbing, lifting, reaching above shoulders, balancing, walking, stooping, and kneeling. Ability to lift, move, and handle 80 lbs. tools or materials. Environmental conditions range from outdoors at all times of the year to indoors at normal office conditions to indoor tempered warehouse areas. **Compensation Range:** Negotiated, commensurate with skills **Notice to prospective employees:** **There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies** **list open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=)** **. Please check our available positions to confirm that a post or email is genuine.** **EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.** **We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal opportunity Employer/Veterans/Disabled.** \#LI-EL1 \#newcomb \#LI-Onsite **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-NC-Raleigh_ **ID** _2025-5378_ **Company** _Newcomb and Company_ **Category** _Engineering_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _2 months ago_ _(11/14/2025 9:35 AM)_

**About Us** We perform installation, rigging, millwrighting, and maintenance for manufacturing and industrial markets across the Southeast. **About us:** Since 1962, Southern Industrial has helped install and maintain the manufacturing and industrial base that has fueled growth across the Southeast. We have grown from a Carolinas-based rigging company into the leading provider of rigging services, turn-key industrial construction and plant maintenance services in the Southeast. As part of EMCOR Group, Southern Industrial's ability to serve our customers is enhanced by EMCOR's financial strength and national presence. Southern Industrial Constructors is looking for a detail-oriented and tech-savvy Technical Writer Intern to support our IT team in creating and maintaining high-quality documentation. This role is ideal for students or recent graduates with a passion for technology and strong writing skills. You'll gain hands-on experience working with engineers, analysts, and support teams to produce user guides, technical manuals, and internal documentation. This is a full-time, paid internship working with a large industrial construction company based out of Raleigh, NC. Dates for internship are May 18th - July 31st. **Key Responsibilities:** + Assist in writing and editing technical documentation, including user manuals, installation guides, FAQs, and internal process documents. + Collaborate with IT staff to gather information and translate complex technical concepts into clear, concise content. + Help maintain and update documentation repositories and knowledge bases. + Ensure consistency in terminology, formatting, and style across all documents. + Participate in document reviews and incorporate feedback from subject matter experts. + Support the creation of diagrams, flowcharts, and other visual aids to enhance documentation. + Learn and apply best practices in technical writing and documentation standards. **Qualifications:** + Currently pursuing a degree in Technical Writing, English, Communications, Information Technology, or a related field. + Strong written and verbal communication skills. + Basic understanding of IT concepts (e.g., networking, software, hardware). + Proficiency with Microsoft Office and/or documentation tools like Confluence, SharePoint, or Google Workspace. + Attention to detail and ability to work independently or in a team. **We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled** **Notice to prospective employees:** **There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies** list open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=) **. Please check our available positions to confirm that a post or email is genuine.** **EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.** **\#SIC** \#LI-KF1 **\#LI-onsite** **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-NC-Raleigh_ **ID** _2025-2502_ **Company** _Southern Industrial Constructors, Inc._ **Category** _Operations Management_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _3 months ago_ _(10/15/2025 8:55 AM)_

About Us QISG leverages Quanta's comprehensive resources to deliver collaborative solutions for our partners' energy infrastructure needs. We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. About this Role Drafter - Substation Every moment of every day, people all over the world rely on electricity provided by Quanta Services and its customers. With its highly skilled and innovative workforce, Quanta is the largest specialty contractor in North America that powers modern life. Find your future with us by being a part of something bigger - leading the energy transition in building a better world for generations to come. We encourage and inspire our people to embrace opportunities within our corporate office and 200 operating companies providing solutions for the utility, renewable energy, electric power, industrial, and communications industries worldwide. Quanta's culture is about creating an environment where all employees can be themselves, are valued, and have an equal opportunity to succeed. When you join our team, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. JOB TITLE: Drafter 1,2,3 - Substation DEPARTMENT: Engineering REPORTS TO: Design Lead CLASSIFICATION: Non-Exempt POSITION OVERVIEW: The Drafter - Substation will perform routine substation design assignments, which require knowledge and skill in basic CAD techniques and procedures. Thorough knowledge of CAD standards, material, and AutoCAD software will be required. This position will report to a Lead Designer and support substation projects across the QISG platform. What We Offer: Competitive salary - overtime is available. Comprehensive health and retirement benefits. Professional development opportunities. What You'll Do: Work on design aspects from project inception to completion on various substation projects. Utilize CAD design software for substation design. Demonstrate knowledge of quality control procedures to ensure the highest standards of workmanship. Take personal responsibility for the quality and accuracy of his/her work. Research information in catalogs, specifications, corporate standards, or other reference material. Learn and properly use the document management system and suggest improvements. Bring potential project-related problems and possible solutions to the attention of the stakeholders. Perform other duties as assigned. Required Experience and Education Associates degree in Drafting & Design or equivalent certification is preferred. Experience in drafting disciplines with a background in substation design is highly preferred. No experience required for an entry level position in the electric utility industry. More experience performing detailed CAD/design for high voltage substation projects could result in a higher pay band. Word processing, spread sheet, and e-mail software. Extensive knowledge of various CAD programs (AutoCAD preferred) Curiosity about and willingness to learn about the major components of a substation. Basic knowledge of these components is a plus. Basic oral and written communications Basic knowledge of the types of drawings required to construct an electrical substation. Working in a team environment Communicating effectively with co-workers Able to deal with ambiguity and ability to work independently, manage multiple tasks and determine priorities in a complex environment. Travel Requirements: Role will likely not require travel as necessary to achieve job responsibilities. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

About Us We are a full-service mechanical contractor providing customers in the commercial, residential, and industrial sectors with innovative, energy-efficient heating and air conditioning services, automation and controls, industrial piping, new construction design and installation, and maintenance and replacement services. Job Summary Job Title: Billing SpecialistDepartment: Service DivisionJob Type: Full-Time / On-Site (Not Remote) Job Summary: We are seeking a high-performing Billing Specialist with a strong foundation in accounting and a passion for solving problems. This role is ideal for someone who thrives in a fast-paced environment, demonstrates exceptional attention to detail, and possesses advanced analytical thinking. You will be responsible for managing complex billing operations for service calls, installations, maintenance agreements, and parts. This includes overseeing billing workflows, resolving discrepancies, and driving process improvements. Candidates must have an Associate's degree in Accounting (or related) and at least 2 years of billing or accounts receivable experience. Primary Duties and Responsibilities: * Operate with a high level of customer service• Generate and issue accurate invoices for HVAC services, installations, maintenance contracts, and parts• Audit work orders, job costing, and technician notes to ensure billing integrity and compliance• Validate service ticket completion and job closure documentation prior to invoicing• Monitor and follow up on outstanding receivables; initiate customer outreach for payment resolution• Collaborate with technicians, project managers, and dispatch personnel to resolve billing discrepancies• Maintain comprehensive billing records and customer account files in accordance with audit and regulatory standards• Support monthly statement preparation, collections efforts, and payment application processes• Reconcile customer accounts and resolve payment discrepancies• Contribute to month-end revenue reporting and financial tracking• Ensure compliance with internal controls and external regulations (e.g., lien waivers, sales tax, contract terms) Advanced Billing: * Perform Billing Batch Reviews• Manage and respond to inquiries via the Billing Email channel• Investigate and resolve Billing Issues with urgency and accuracy• Conduct Collections Invoice Reviews and support collection efforts• Process and track Credit Requests and apply Credits accurately• Review Daily Cash Receipts and ensure proper posting• Manage Invoice Holds and monitor Invoices in Process• Track and follow up on Past Due accounts• Oversee Posting Inventory related to billing transactions• Execute Agreement Billing for service contracts• Identify and prepare jobs marked Ready for Billing• Process Refunds and ensure proper documentation• Process Service Billing with urgency and accuracy• Process Voids and maintain audit trails• Administer multiple Billing Portals and ensure data consistency across platforms Leadership & Growth Expectations:• Demonstrate strong problem-solving skills and take initiative to resolve complex billing challenges• Exhibit exceptional attention to detail in all aspects of billing and documentation• Apply analytical thinking to identify trends, improve processes, and reduce errors• Communicate effectively with internal teams and customers to ensure billing clarity and resolution• Show readiness to lead billing operations, mentor junior staff, and contribute to strategic improvements Required Qualifications:• Associate's degree in Accounting, Finance, or a related field• Minimum of 2 years of billing or accounts receivable experience (service-based or project-driven environment a plus)• Proficiency in Microsoft Office Suite (Excel, Outlook, Word)• Strong analytical skills and attention to detail• Excellent written and verbal communication skills• Ability to work independently and manage multiple priorities in a fast-paced setting Preferred Qualifications: * Experience with flat-rate pricing, time and materials billing, and contract billing models• Knowledge of lien rights and state-specific billing regulations• Proficiency in accounting software such as QuickBooks, Sage, or similar platforms• Experience supporting financial audits or internal compliance reviews #newcomb #LI-Onsite #LI-EL1 Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

** **Work with Us. Change the World.** At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. **Job Description** **AECOM is hosting an exclusive, invitation-only hiring event in Raleigh on January 28-29, 2026** . This is a great opportunity to learn and connect with AECOM for career opportunities starting Spring/Summer 2026. **The event kicks off on Wednesday evening with a networking mixer from 6-8 pm** , where you can hear from AECOM staff about various projects, career paths, and the company itself. You'll also have the chance to meet other students, recent graduates, and AECOM professionals from across our business lines. **On Thursday, interviews will take place at our Raleigh office.** This is a fantastic opportunity to learn about and connect with AECOM for early career opportunities. **AECOM** is seeking an **Entry-Level Geologist** to join our Remediation team in our **North Carolina** offices. The successful candidate will work with a diverse team of technical leaders across a broad range of practice areas delivering professional consulting services to our key clients. _This position is expected to begin in Spring/Summer 2026._ This is a field-based role comprising approximately 80% field work and 20% office-based work. The candidate will join a large established team conducting environmental assessment and remediation projects across the states of New York and New Jersey. The candidate will communicate effectively with members of the project team, clients, site personnel and office management, and work both independently and as a part of a project team. Note this role may require travel outside of New York and New Jersey (from days to weeks) to support projects as needed across the United States. The responsibilities of this position include, but are not limited to: + Performing routine fieldwork, working under close supervision from project managers. Field work may include soil, sediment, surface water and/or groundwater sampling, operation and maintenance of remedial systems, and drilling and remedial construction oversight including subcontractor management. + Participating in site visits and coordinating and assisting field staff as required. + Performing work in accordance with agreed upon budget and schedule under supervision. + Develop knowledge of job-specific federal, state, and local laws and regulations and assigned job specifications. + Collecting and analyzing data under the supervision of an experienced scientist/engineer. + Preparing progress reports for internal and external stakeholders. + Attending meetings and reporting on project tasks. **Qualifications** **MINIMUM REQUIREMENTS:** + BA/BS in Geology or related field. + Due to the nature of the work, U.S. Citizenship is required for this role. + Valid US Driver's License is required for this position. As a condition of employment, selected candidate must pass a Motor Vehicle Records review. **PREFERRED QUALIFICATIONS:** + Experience and/or coursework related to environmental remediation. + Proficiency in GIS and Microsoft Office Suite (Excel, Word, Outlook) software. + Experience with data visualization tools. + Experience with field and/or construction documentation. + OSHA 40-hour HAZWOPER certification. **Additional Information** + Relocation assistance is not available for this position. + Sponsorship assistance is not available for this position. Offered rate of compensation will be based on individual education, qualifications, experience, and work location. The range for this position is $55000 to $62000. **About AECOM** AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. **What makes AECOM a great place to work** You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. **ReqID:** J10139347 **Business Line:** Environment **Business Group:** DCS **Strategic Business Unit:** East **Career Area:** Science **Work Location Model:** Hybrid **Compensation:** USD 55000 - USD 62000 - yearly

**About Us** We perform installation, rigging, millwrighting, and maintenance for manufacturing and industrial markets across the Southeast. **About us:** Since 1962, Southern Industrial has helped install and maintain the manufacturing and industrial base that has fueled growth across the Southeast. We have grown from a Carolinas-based rigging company into the leading provider of rigging services, turn-key industrial construction, and plant maintenance services in the Southeast. As part of EMCOR Group, Southern Industrial's ability to serve our customers is enhanced by EMCOR's financial strength and national presence. **Job Title:** SIC Structural Welder (RAL FUJI RM) **Job Summary:** Southern Industrial Constructors, Inc. seeks Structural Welders for a project in Holly Springs, NC. Hired candidates will be considered for Benefits/Paid Time Off after 3-months. **Essential Duties and Responsibilities:** + Select equipment and plan layout, assembly, and welding, applying knowledge of physical properties of metal machining weld shrinkage, and welding techniques. + Lay out, position, align, and fit components together. + Bolt, clamp, and tack-weld parts to secure in position for welding. + Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. + Assemble parts by bolting and riveting. + Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torch, straightening press, and hand tools. + Rate information using standards that can be measured or checked. + Detect, recognize and respond to dangerous conditions and situations. + Certification at one or more levels is required + Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. **Qualifications & Skills:** + Skilled in both written and verbal communication. + Complete all Safety and general job training as required by SIC. + Observe SIC and Customer safety and quality processes and procedures at all times. **Physical Requirements/Job Site Requirements:** + Must be able to effectively use all required PPE equipment and lift up to fifty pounds. + Conditions include working in office, shop, busy traffic areas, warehouses, and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. + Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as, confined spaces. + Strenuous physical demands are required to safely perform the essential functions associated with this position. + Must be able to safely operate all involved equipment and tools. + Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats, and working in awkward body positions. **_Notice to prospective employees:_** There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companieslist open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=) **.** Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. **As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we** **offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled.** **\#SIC** **\#LI On-Site** **\#LI-VB1** **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-NC-Raleigh_ **ID** _2025-2753_ **Company** _Southern Industrial Constructors, Inc._ **Category** _Operations Services_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _3 months ago_ _(10/14/2025 1:00 PM)_

Hubbell Inc brand PCX stands as a premier integrator of engineered, prefabricated/modular electrical and mechanical systems for data centers, commercial, and industrial markets. Our offerings range from Modular Data Centers to Custom Integrated Switchboards and comprehensive indoor/outdoor electrical distribution centers. We are seeking a highly experienced and dynamic Sales Engineer to lead our sales initiatives, providing cutting-edge modular or prefabricated power distribution solutions to our Data Center clientele. This role demands a proactive approach in delivering presentations, spearheading technical sales, participating in trade shows, and engaging directly with customers to foster long-term relationships. A Day In The Life * Deliver expert pre and post-sales technical support, including design assistance, addressing technical queries, and crafting tailored solutions, quotes, and proposals. * Actively engage with key accounts to consult, advise, and enhance the client experience, setting a standard well above industry norms. * Collaborate closely with the Sales team to ensure our products are the preferred choice over competitors during all customer interactions and opportunity stages. * Utilize comprehensive market and product knowledge to integrate Hubbell PCX into specifications from the initial design stages. * Lead targeted product meetings and presentations, develop strong client relationships, and ensure follow-through to order completion. * Champion client satisfaction and issue resolution to secure repeat business and sustain long-term client partnerships. * Monitor market and competitor activities, providing insightful reports and strategic feedback to Product Management, Engineering, Marketing, and Sales leadership teams. * Work in tandem with Product Managers, Engineering, and Marketing to penetrate strategic market verticals effectively. * Maintain and manage a robust sales pipeline and forecasting activities (via Salesforce) to support regional technology strategies and growth objectives. * Represent the company at trade shows, industry events, and customer meetings, and provide training and support to the DC sales team. What will help you thrive in this role? * 5+ years of experience in data center technical sales. * Bachelor's Degree in Engineering or a related technical field. * Proficiency in interpreting One Line diagrams and using electrical design software such as AutoCAD, Revit, SolidWorks. * Exceptional communication skills, both oral and written. * Proven ability to interact effectively with a diverse range of customers. * Proficiency in Microsoft Office suite. * Willingness and ability to travel domestically up to 60%. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Electrical Solutions Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. HES provides the critical components that allow operators of buildings, factories and other industrial infrastructure to connect, protect, wire and manage power. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

If you are a **Program Manager** professional looking for an opportunity to grow your career, Emerson has an exciting role for you! In this position, you will lead cross-functional teams to deliver impactful programs within the Life Sciences industry. You will oversee the full lifecycle of program execution-from charter development to benefits realization-ensuring value delivery, stakeholder engagement, and governance excellence. This role is part of Emerson's Systems and Software business, a global leader in process automation, where you will manage DeltaV and DeltaV Manufacturing Execution Systems (MES) projects focused on Life Sciences industries. This position can be located in **Houston, TX, Blue Bell, PA, Durham, NC, Round Rock, or St. Louis, MO.** **In This Role, Your Responsibilities Will Be:** This role requires a deep understanding of Life Sciences operations, regulatory environments, and innovation cycles. + Develop and maintain the Program Charter and Program Management Plan. + Align individual project plans with overarching program goals and benefits. + Act as a steward of the program, nurturing organizational support and awareness. + Identify, assess, and report KPIs to measure program value and manage interdependencies among program components. + Ensure benefits align with strategic objectives and are sustained post-delivery. + Assess stakeholder influence, attitudes, and interests; tailor communications to stakeholder needs and expectations. + Ensure conformance to governance policies and processes, monitor program health, funding, and risks, and escalate critical issues as needed. + Build and guide high-performing teams, coach and mentor project managers, and foster collaboration and change management. **Who You Are:** You anticipate customer needs and deliver solutions that exceed expectations. You build trust and partnerships by finding common ground and adapting your communication style to diverse audiences. You collaborate effectively, seek feedback, and continuously learn. You understand internal and external partner requirements and work to meet and exceed those expectations. **For This Role, You Will Need:** + Bachelor's degree in science, engineering or a related field + 10+ years of experience working on control system projects + 5+ years as a Program Manager or 10+ years as a Project Manager + Proven ability to manage complex projects, including scope, financials, schedule, risk, quality, and customer relationships. + Ability to travel up to 25% to support customer meetings and site activities. + Legal authorization to work in the United States without sponsorship now or in the future. **Preferred Qualifications that Set You Apart:** + Experience managing complex, multi-project programs. + Strong background in strategic planning, governance, and benefits realization. + Exceptional interpersonal, analytical, and leadership skills. + Experience in Life Sciences or related fields. + PMP, PgMP, or similar certification. **Our Culture and Commitment to You:** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values (************************************************************** . \#LI-MS11 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25030373 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

If you are an experienced Process Control Automation Engineer in the Life Sciences industry looking for an opportunity to grow, Emerson has an exciting opportunity for you! Based in our **Philadelphia, PA, Durham, NC, Houston, TX, or St. Louis, MO** locations, we are looking to add a Process Automation Consultant - Life Sciences to the team. You will direct and perform development, design, implementation, testing, and startup of process control solutions for our clients using DeltaV. You will work directly with customers, and Emerson engineers and project managers. Emerson is a global company dedicated to making the world a better place. Our Products have helped fast-track development and delivery of COVID-19 treatments, we are helping life science companies get life-changing medications into the hands of patients faster and safer than ever before. You will be working for a company that believes a diverse, equitable and inclusive workplace contributes to the rich exchange of ideas that inspire innovation. Come join us! **In This Role, Your Responsibilities Will Be:** - Lead and execute the planning, design, implementation and testing of customer projects, throughout the different phases of the project, responsible for the technical scope, solution, and quality. - Work with customers to influence long-term automation plans and strategies, identify potential projects, explain Emerson products and services capabilities and frame those projects including financial justification. - Understand the project scope and financials to participate in the framing and quoting of projects to ensure successful project execution and Identify change orders and justify changes to Project Management; resolve issues and establish priorities. - Develop and improve processes, procedures and tools to be used in the execution of projects - Develop detailed designs, implement and test DeltaV solutions that meet best practices of the industry and client requirements. - Lead, plan, coordinate and review the work of the project team members, acting as a mentor for individuals within the engineering organization. **Who You Are:** You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. You anticipate customer needs and provide services that are beyond expectations. You quickly act on challenges, maintaining a can-do attitude. You follow through on commitments and promote individual accountability within the team. You deal constructively with problems that do not have clear solutions or outcomes and lead a group of engineers. **For This Role You Will Need:** - Bachelor of Science in Engineering or other technical field - 10+ years of experience, with at least 5+ years working on complex batch control projects with DeltaV in the Life Sciences industry. Experience must include leading a Life Sciences industry automation project, working with customers to create functional requirements, designing control strategies and providing startup support at site. - Professional image and ability to build relationships with customers - Comfortable working in plant sites, and possess the ability to navigate staircases, ladders, scaffolding, and catwalks - Willingness to travel to end user locations at least 25% of the year - Legal authorization to work in the United States without sponsorship now or in the future **Preferred Qualifications That Set You Apart:** - Experience with regulatory/compliance documentation and procedures - Knowledgeable in FDA validation requirements preferred, including User Requirement and Design Specs, Business Process Procedures, Design Reviews, Requirements gathering - Experience with GAMP5 - Knowledge of PMI Project Management framework. - Knowledge of MES systems **Our Culture & Commitment to You** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values (************************************************************** . \#LI-SD1 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25027735 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

**About Us** We perform installation, rigging, millwrighting, and maintenance for manufacturing and industrial markets across the Southeast. **About us:** Since 1962, Southern Industrial has helped install and maintain the manufacturing and industrial base that has fueled growth across the Southeast. We have grown from a Carolinas-based rigging company into the leading provider of rigging services, turn-key industrial construction, and plant maintenance services in the Southeast. As part of EMCOR Group, Southern Industrial's ability to serve our customers is enhanced by EMCOR's financial strength and national presence. **Job Title:** SIC Rigger (RAL FUJI RM) **Job Summary:** Southern Industrial Constructors, Inc. seeks a Rigger for a project in Holly Springs, NC. Hired candidates will be considered for Benefits/Paid Time Off after 3-months. **Essential Duties and Responsibilities:** + Select cables, ropes, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. + Attach pulley and blocks to fixed overhead structures, such as beams, ceilings, and gin pole booms with bolts and clamps. + Attach load with grappling devices, such as loops, wires, and chains to crane hook. + Give directions to Crane Operator engaged in hoisting and moving loads to ensure safety of workers and material handled, using hand signals, loudspeaker, or telephone. + Set up, brace, and rig hoisting equipment, using hand tools and power wrenches. + Splice rope and wire cables to make or repair slings and tackle. + Coordinate the movement of equipment and materials according to visual signals and directions. + Rate information, using standards that can be measured or checked. + Detect, recognize, and respond to dangerous conditions or situations. + Regular attendance is required. + Significant travel may be required. + Performs other duties as required. **Qualifications & Skills:** + Skilled in both written and verbal communication. + Complete all Safety and general job training as required by SIC. + Observe SIC and Customer safety and quality processes and procedures at all times. **Physical Requirements/Job Site Requirements:** + Must be able to effectively use all required PPE equipment and lift up to fifty pounds. + Conditions include working in office, shop, busy traffic areas, warehouses, and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. + Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as, confined spaces. + Strenuous physical demands are required to safely perform the essential functions associated with this position. + Must be able to safely operate all involved equipment and tools. + Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats, and working in awkward body positions. **_Notice to prospective employees:_** There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companieslist open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=) **.** Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. **As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we** **offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled.** **\#SIC** **\#LI On-Site** **\#LI-VB1** **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-NC-Raleigh_ **ID** _2025-2746_ **Company** _Southern Industrial Constructors, Inc._ **Category** _Operations Services_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _3 months ago_ _(10/14/2025 1:00 PM)_

If you are an experienced Project Management professional looking for an opportunity to grow within a global organization, Emerson has a great opportunity for you! As a **Control Systems** **Project Manager - Life Sciences** , you will join the team responsible for execution of DeltaV projects focused on the Life Sciences industries up to $20M in value within Emerson's Systems and Software business leader in the process automation industry. You can be based in one of our engineering center offices in **Houston, TX, Bluebell, PA, Durham, NC, Round Rock, TX** **,** **St. Louis, MO, & Kansas City, KS** . **In This Role, Your Responsibilities Will Be:** + Develop and maintain strong customer relationships throughout the project lifecycle. + Proactively identify and manage project risks in collaboration with the project team and customers. + Lead projects to achieve cost, schedule, and quality objectives. + Communicate and manage project changes that impact cost and/or schedule with customers. + Contribute to proposal development by estimating project management and controls efforts, creating preliminary schedules, defining execution strategies, and performing risk assessments. **Who You Are:** You anticipate customer needs and deliver solutions that exceed expectations. You act decisively in fast-changing, unpredictable situations and adapt your communication style to connect with diverse stakeholders. You build trust through collaboration, seek feedback, and continuously learn from others. You understand partner requirements and model integrity and high ethical standards in all interactions. **For This Role, You Will Need:** + Bachelor's degree in science, engineering or a related field + 10+ years of experience working on control system projects with at least 5 of those years in Life Science. + 5+ years as a Project Manager. + Demonstrated success managing complex projects involving scope, financials, schedule, risk, quality, and customer relationships. + Ability to travel to client and other Emerson locations up to 25% of the time. + Legal authorization to work in the United States without sponsorship now or in the future. **Preferred Qualifications that Set You Apart:** + PMP Certification. + Experience with Agile/Scrum project execution. + Familiarity with DeltaV systems. **Our Culture and Commitment to You:** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values (************************************************************** . \#LI-MS11 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25030007 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

About Us QISG leverages Quanta's comprehensive resources to deliver collaborative solutions for our partners' energy infrastructure needs. We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. About this Role We use in-house talent, expertise and resources to plan, design, engineer, manage, conduct maintenance on and construct projects. This turnkey project execution strategy ensures there is one point of contact to handle projects of any size from beginning to end and allows a cohesive and coordinated Quanta Services team to enter the project life cycle at the earliest stage possible. Our turnkey service capabilities provide our customers with efficiency, consistency, attention to detail and safe execution. The QISG team brings together Engineering, Safety, Quality, Material Procurement, QA/QC, Right-of-Way Acquisition, Scheduling, Environmental Planning, Permitting, Title and Land Management expertise that ensure outstanding results for our clients. The Supervising Engineer will oversee the detailed design of high voltage substation projects. This role involves managing a team of engineers, designers and support staff to ensure projects are completed on time, within budget, and in compliance with all relevant regulations and standards. The ideal candidate will have a degree in electrical engineering, with extensive experience in performing the detailed design of high voltage substation projects. What You'll Do Review of Vendor documentation and co-ordination with internal Sourcing Team Support to Proposal Team including preparation of Bill of Materials, develop technical concepts and provide Single Line Diagram, Layout plan etc Co-ordinate directly with clients, engineer, sub-contractors and supplier's technical issues, and technical interfaces Plan and perform technical design reviews together with design teams and report technical risks to line management and PM Review Inspection and Test plan, and attend FAT for major Electrical Equipment if required List and report all noted deviations to the engineering specifications, plan and implement corrective actions in co-operation with PM Responsible for answering technical site questions and review / comment of non-conformance reports from site from engineering point of view Other duties as required What You'll Bring Minimum of 7 years' experience in the electric utility industry or EPC Companies performing engineering related duties and/or management for high voltage electrical substation design. Bachelor of Science degree (B.S.) or Graduate degree in Electrical Engineering from an ABET accredited university. P.E. license required. Proven track record of successfully leading multidisciplinary engineering teams and delivering complex projects on time and within budget. Strong technical expertise in electrical engineering, with a comprehensive understanding of engineering principles and practices. Expert knowledge of electric utility engineering and construction standards. Knowledge of utility industry processes including scheduling, contracts, coordinating and managing all disciplines. Knowledge of process and procedures for project controls and estimates. Demonstrated experience supporting external customers. Excellent communication, interpersonal, and leadership skills, with the ability to collaborate effectively with internal teams, clients, and external partners. Knowledge of relevant industry codes, standards, and regulations, including ANSI, ASTM, ACI, AISC, IEEE NEC, NESC, and others. Able to deal with ambiguity and ability to work independently, manage multiple tasks and determine priorities in a complex environment. Travel Requirements: Role will require travel as necessary to achieve job responsibilities, up to 10-15% of the time. What You'll Get Competitive salary and bonus structure. Comprehensive health and retirement benefits. Professional development opportunities. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Assist skilled craftsperson(s) by performing supportive duties as directed and will work under immediate supervision. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned job step. Experience Level Entry Primary Responsibilities and Duties * Work with industry specialists to trouble shoot/diagnose problems with production machinery. * Learn to set-up, run, troubleshoot, and tear down production machinery. * Assist wiht keeping designated machinery in running condition. * Minimize down time by assisting with effective PM procedures and management. * Assist with troubleshooting machinery errors during production times. * Work with Machine Operators to ensure machines are running safely and properly. Qualifications * May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. * Must possess knowledge skills and abilities for position * Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision * Field experience in chosen craft discipline * Knowledge of the safe and efficient use of hand tools, power tools and layout tools. Requirements * Able to meet all physical requirements. * Must have all required tools * Expected to climb and work at heights and in confined spaces (may exceed 200 ft) * Able to work outdoors in all weather conditions * Able to work overtime, nights, and weekends as required by the workload * Observe and comply with all safety and project rules. Performs other duties as required. Equal Opportunity Employer, including disability and protected veteran status.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description AECOM is hosting an exclusive, invitation-only hiring event in Raleigh on January 28-29, 2026 . This is a great opportunity to learn and connect with AECOM for career opportunities starting Spring/Summer 2026. The event kicks off on Wednesday evening with a networking mixer from 6-8 pm , where you can hear from AECOM staff about various projects, career paths, and the company itself. You'll also have the chance to meet other students, recent graduates, and AECOM professionals from across our business lines. On Thursday, interviews will take place at our Raleigh office. This is a fantastic opportunity to learn about and connect with AECOM for early career opportunities. AECOM is seeking a Transit / Rail Engineering Intern to support our growing Transit and Rail practice in North Carolina. This internship offers hands‑on experience working alongside experienced engineers and planners on transit/rail projects, including freight rail, light rail, streetcar, commuter rail, bus rapid transit (BRT), and multimodal corridor improvements. This position is expected to begin in the Summer of 2026. The responsibilities of this position include, but are not limited to: Supporting planning, preliminary engineering, and design tasks for transit and rail projects Assisting with preparation of engineering drawings, exhibits, and technical documentation Performing basic engineering calculations and analysis related to alignments, stations, transit facilities, utilities, drainage, pavements, and multimodal infrastructure Supporting alternatives analyses, feasibility studies, and concept development for transit corridors Working collaboratively with other team members and disciplines to support project delivery Qualifications Minimum Requirements: Candidates must be currently enrolled in a university program pursuing a bachelor's degree or higher in Civil Engineering or a related field. Candidates must have completed two years of study in their program. Preferred Qualifications: Proficiency with Microsoft Office Suite, including Word, Excel, and PowerPoint. Experience with AutoCAD or MicroStation products. Additional Information Relocation assistance is not available for this position. Sponsorship for US employment authorization is not available now or in the future for this position. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options , well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

About Us HBK Engineering, LLC is a fully licensed, professional engineering design firm headquartered in Chicago, IL with a staff approaching 700 individuals. HBK provides civil, environmental, structural, electrical, subsurface utility, construction support services and permitting facilitation. Since our founding in 1998, we have earned a reputation for delivering outstanding, accurate services in extremely time-sensitive, multilayered environments. That "industry-recognized" performance has propelled our expansion and the ability to provide engineering services in all 50 states. With 25 offices nationwide, including concentrations in the Midwest and on the Coasts, HBK brings together a dedicated team whose main focus is the design and protection of utilities and utility networks. We have successfully performed engineering work for a complete spectrum of utility infrastructure projects providing solutions and construction support from Coast to Coast in areas ranging from complex urban city centers, to rural greenfields, to limited access rights-of-way. In July 2020, HBK Engineering was acquired by Quanta Services. Quanta Services provides infrastructure services for electric power, pipeline, and communications industries and employees over 50,000 people. Quanta's focus on the utility industry and HBK's focus on constructability in our designs has made our integration into the Quanta family of companies seamless. About this Role HBK Engineering is seeking highly motivated and talented individuals for 2026 Summer Engineering Intern positions. Our firm offers an excellent learning environment for students allowing them to gain hands-on field and design experience. Engineering Interns at HBK are considered an integral part of the company and are provided with tasks that are both technically challenging and educationally stimulating. What You'll Do Work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of civil and electrical/power engineering related issues. Work with a team lead in the coordination of detailed design phases for all aspects of civil and electrical engineering work. Perform designs for utility infrastructure using standard engineering guidelines. Assist in leading efforts to ensure projects are completed satisfactorily, on time, and within budget. Coordinate design activities to ensure installation and operations will comply with specifications, codes and client requirements. Interface with vendors to prepare materials. Prepare reports and studies that present technical information in a clear and concise manner and meet client requirements. What You'll Bring Minimum Qualifications: Pursuit of Bachelor's degree in Civil or Electrical Engineering from an accredited institution with at least one-year of post-secondary education. Essential skills: Excellent verbal and written communication skills. Strong problem solving and analytical skills. Working knowledge of computer application software (training will be provided if needed) Organized and able to work in a fast-paced environment. Work independently with minimal supervision. Valued but not required skills and experience: Minimum of a 3.0 GPA strongly preferred. Prior internship and/or related consulting experience. Involvement on campus or in the community. Flexible and able to work overtime when required. Demonstrated leadership skills. Experience using CAD-based software, and Microsoft Office Suite. Surveying experience. What You'll Get Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.