Energy Systems jobs - 17,767 jobs

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC is an industry leading, dynamic company that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC provides compensation, incentives and benefits that allow our employees to build careers - not just work a job. “2022, 2023 & 2024 Top Companies for Women to Work For in Transportation” by Redefining the Road , the official magazine of the Women In Trucking Association (WIT). This is a full time, local position. You will be home daily. Marathon Petroleum Company LP (MPC) has a position available for a professional light products transport driver in Safford, AZ. Our drivers are responsible for the safe and efficient delivery of petroleum products to regional terminals, refineries, and various other locations. Transport drivers independently follow specified policies, procedures and standards, under the general supervision of local fleet management. Benefits Hourly Range $31.71 - $33.02 Insurance: Health/Dental/Vision coverage available day 1 Retirement: 401k with company match up to 7% Pension: Company funded pension plan up to 11% Annual bonus: Eligible for company sponsored annual bonus Paid parental leave Education reimbursement For full benefit details visit ********************* Minimum Qualifications Active Class A Commercial Driver's License Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must register with FMCSA Drug & Alcohol Clearinghouse and provide consent to company for review of clearinghouse records. Must be able to drive interstate. Active CDL Endorsements: Hazardous Materials and Tank Vehicle (Required) Shift Requirements Must be able to work up to a 12-hour AM/PM shift. Must be able to work hours beyond schedule Job Responsibilities Perform pre-trip inspection on equipment in alignment with MPC policy and Department of Transportation (DOT) regulations. Check tank truck/trailer or tractor/trailer for general operating requirements and make sure that all required equipment is available and in good operating condition. Note inspection and deficiencies on the pre-trip inspection form. Drive a tank truck/trailer or tractor/trailer to transport product in a safe, efficient, and professional manner. Obey all applicable federal, state and local laws. Follow MPC and site specific standard operating procedures for the loading and offloading process. Perform post-trip inspection on equipment in alignment with MPC policy and DOT regulations. Complete all regulatory and customary paperwork. Ensure equipment is ready for the next shift. Communicate all incidents, including safety and environmental concerns, according to company procedures. Report all equipment issues in a timely manner. Follow, maintain, and adhere to all safety rules and operating procedures, including all DOT regulations. Physical Requirements Include Must be able to work outside in all types of weather conditions. Must be able to work on elevated spaces: 30+ feet on graded elevation. Must be able to frequently lift, carry, push, and/or pull 50-65 lbs. Must be able to sit for extended periods of time. Must be able to grip a steering wheel for extended periods of time. Screening Requirements Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must pass required drug and alcohol screening(s). Must complete DOT physical and maintain current medical card. Must pass three-year DOT safety background check and seven-year criminal background check. Must pass pre-trip exam and road test to demonstrate proficiency operating required equipment. #TR As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Safford, Arizona Additional locations: Job Requisition ID: 00019767 Location Address: 1010 E US Highway 70 Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

A sustainable cloud infrastructure company in San Francisco is seeking a Compute-focused Site Reliability Engineer to support and optimize virtualization and performance of compute infrastructures. The ideal candidate has over 5 years of experience in Linux system engineering, strong Linux kernel knowledge, and is proficient in programming languages like Go or C. Join a team driving meaningful innovation in the AI sector while enjoying competitive compensation and a comprehensive benefits package. #J-18808-Ljbffr

A fast-growing technology company in San Francisco is seeking a Technical Project Manager to oversee the technical design aspects of large-scale data center projects. The ideal candidate will have over 7 years of civil engineering experience and be adept at managing design teams. Responsibilities include collaboration with various stakeholders, ensuring design compliance, and optimizing project plans. Competitive compensation package includes industry pay and various benefits. #J-18808-Ljbffr

A leading tech company in San Francisco seeks a Senior Customer Success Manager. The role involves driving customer success through strong relationship management and technical guidance on cloud solutions. Candidates should have a strong background in customer success within technology and excellent interpersonal skills. This full-time position offers competitive pay and numerous benefits, including stock options and health insurance. #J-18808-Ljbffr

A leading technology firm in San Francisco is seeking a Production Engineer to manage fleet operations and develop automation tools for server provisioning. This role is essential for transitioning the infrastructure to Kubernetes and includes troubleshooting hardware issues. The ideal candidate will have solid hardware experience and a strong Linux background, along with Kubernetes proficiency. Competitive pay and benefits are offered including stock options and health insurance. #J-18808-Ljbffr

On the heels of achieving 3X growth, Virginia Transformer is hiring to do it again! We're strategically building our team for the next 3X growth cycle - a phase that is both intense and incredibly rewarding. We're highly selective about who joins us, because this journey isn't for everyone. If you have the drive, grit, and expertise to perform at a high level - and you want to grow your career 3X alongside the Company's growth - we'd love to talk. Apply below and let's start the conversation. Who We Are Virginia Transformer is the largest U.S.-owned producer of power transformers in North America, and we've been able to grow the past 50-plus years through an unwavering focus on delivering for our customers. We're more than 5,400 people strong and are known throughout the industry for being an engineering company that makes premium quality transformers in the shortest lead times. As a privately held, organically growing company, we thrive on nimbleness, innovation, and tenacity. Maintenance Manager - Georgia Transformer Role Summary The Maintenance Manager is responsible for overseeing maintenance operations, equipment reliability, and MOR (SPOF) storeroom management to support safe, efficient, and uninterrupted manufacturing operations. This role ensures critical spare parts availability, leads maintenance teams, and partners with suppliers to minimize downtime and drive continuous improvement. Key Responsibilities Lead day-to-day maintenance activities for plant equipment and facilities. Develop and execute preventive and corrective maintenance programs. Manage the MOR (SPOF) storeroom, including cycle counts and inventory accuracy. Establish and maintain min/max inventory levels for critical spare parts. Order MOR/MRO parts to prevent zero-on-hand and extended downtime. Manage purchasing processes and supplier relationships. Ensure compliance with safety standards and company policies. Drive reliability, TPM, and continuous improvement initiatives. Qualifications Maintenance leadership experience in a manufacturing environment. Experience with storeroom management and inventory control. Strong knowledge of MOR/MRO parts and purchasing processes. Proven supplier relationship management experience. CMMS/ERP system experience preferred. HR Notes Experience in MOR/SPOF inventory management required. Purchasing and supplier management experience required.

Airgas is Hiring for a Plant Operations Manager in South Plainfield, NJ! At Airgas, we are committed to building a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultu Operations, Operations Manager, Manager, Plant, Diversity, Production, Manufacturing

Advanced Environmental Group, Inc. (AEG) is seeking a Safety Specialist - Site Safety Officer in California. The health and safety technician will support the AEG Safety Team. This position is designed for individuals with 3-5+ years of experience in the construction safety and environmental remediation field. This individual must be familiar with general construction, drilling, heavy equipment operation and large-scale remedial/construction activity. This contracted position is a full-time. RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO: Full time assignment to complete a variety of health and safety related roles in support of a major projects. The CHST , ASP or CHST/ASP candidate will provide oversight of field crews performances during, installation and testing; construction of remediation well-head infrastructure; above-ground water storage infrastructure; buildings and above-ground structures; grading and earthwork; construction of electrical infrastructure; and, controls/instrumentation activities. All site work will be conducted in accordance with Cal/OSHA (Construction and General Industry) Safety Orders; site specific health and safety plan(s); and, AEG policies and procedures. REQUIRED QUALIFICATIONS 3+ years' experience performing full time construction health and safety related tasks including: managing safety programs, processes, conducting hazard analyses and audits, and developing controls; Certified Construction Health and Safety Technician (CHST ) or Associate Safety Professional (ASP ) or meet requirements to sit and pass exam; 40-hour OSHA Hazwoper Certified or training to be provided; Working knowledge of Cal/OSHA, EPA, NFPA, & ANSI safety related regulations. Good time management skills and communication; and, Experience using MS Office Suite products required. REQUIRED DRIVING STATEMENT This position requires a current valid driver's license and clean driving record. PREFERRED QUALIFICATIONS Experience with Behavior Based Safety General Construction Safety Competency Excavation Safety Competency Fall Protection Competency Electrical / LOTO Competency WORKING CONDITIONS Work will be performed outdoors or on construction project jobsites subject to extreme heat and cold, noise, vibrations and dust. Must have the ability to wear a respirator and adhere to all company safety requirements, where required. PHYSICAL REQUIREMENTS Must have the ability to independently lift and carry objects safely that weigh up to 50 pounds. Must be able to climb and maintain balance on ladders and scaffold; kneel, crouch, crawl, reach, push, pull, twist, finger grasp and feel on a constant and repetitive basis; stand, walk, talk, see (20/20 vision naturally or corrected), hear within normal range and perform repetitive motion activities. Must be able to physically negotiate the hazards of a new construction worksite (e.g. uneven surfaces, floor openings, heights, construction debris and limited lighting) and adhere to all company safety requirements. DESCRIPTION OF WORK ENVIRONMENT Field work and desk/office work. As necessary, must be able to travel to other work areas, be aware of safety requirements for those areas, and work within those constraints (e.g. access procedures and proper PPE). Walking on uneven terrain including paved areas, gravel/rocks, and dirt/sand is required to access various locations on the project site. CRITICALITY OF ATTENDANCE Regular attendance and punctuality is required. Project schedule and is based on a 8-hour day, 5 days per week. Overtime may be required through duration of the job. Advanced Environmental Group, Inc. is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. AEG does not discriminate in employment opportunities or practices on the basis of: race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, veteran status, or any other characteristic protected by country, regional, or local law. Job Types: Full-time, Contract, Temporary Pay: From $70,000.00 per year Benefits: 401(k) Schedule: 10 hour shift 8 hour shift Weekends as needed Work Location: On the road

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About the Role: As part of our continued expansion, we're hiring a Construction Cost Estimator to drive cost modeling and financial accuracy across our capital projects. This role plays a critical function in delivering predictable outcomes by pairing detailed cost estimation with proactive cash flow forecasting to support Crusoe's global growth. What You'll Be Working On: Lead end-to-end estimating efforts for data center builds-from early-stage planning through construction execution Develop robust cost models that align with design intent, scope evolution, and delivery strategies. Collaborate with design, procurement, and delivery teams to validate quantity take-offs and unit pricing Build and maintain project cash flow forecasts to support financial planning, budget tracking, and funding requests Provide detailed estimates for CSA, MEP, and mission-critical systems for domestic and international builds Evaluate vendor and subcontractor proposals against internal benchmarks and historical data Analyze variances and model cost impacts due to design changes, procurement risks, or schedule shifts Partner with finance, real estate, and development teams to inform business cases and funding strategy Deliver concise cost reports, dashboards, and executive summaries with clear insights and recommendations Establish scalable tools and repeatable processes to support Crusoe's infrastructure pipeline Maintain historical cost databases and continuously refine models based on actuals and market trends Contribute to site feasibility assessments and preconstruction planning with data-backed insights Support value engineering exercises and cost optimization strategies What You'll Bring to the Team: Bachelor's degree in Construction Management, Engineering, Quantity Surveying, or related field 10+ years of experience in construction cost estimating for complex infrastructure projects Strong experience in cost modeling, budgeting, and cash flow forecasting Deep technical knowledge of MEP, CSA, and mission-critical systems Expertise with estimating software such as CostX, Sage Estimating, or equivalent Ability to translate technical and financial inputs into actionable reporting Strong communication skills with experience presenting to both technical and executive stakeholders Willingness to travel up to 25%, including international locations Background with general contractors, owner's rep firms, or tech/data center infrastructure Familiarity with the full construction lifecycle including preconstruction, procurement, and delivery Experience with Lean methodologies, design-build, or integrated project delivery Advanced degree or certifications such as AACE, RICS, or CMAA Benefits: Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300 per month Compensation Range Compensation will be paid in the range of up to $154,000 - $188,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. #J-18808-Ljbffr

A leading technology company is seeking a Compute-focused Site Reliability Engineer in San Francisco, California. This role is essential for developing sustainable, AI-driven cloud solutions, ensuring performance and security. Candidates should have over 5 years of experience in SRE or system engineering, with strong Linux kernel and virtualization skills. The compensation range is competitive, including additional benefits like restricted stock units, health insurance, and a 401(k) match. #J-18808-Ljbffr

Think Different. Build the Future. 🚀Our Mission Build everyday AGI. Trustworthy, consumer-grade agents that redefine human-AI collaboration for millions. Software shouldn't wait for commands; it should partner with you, amplifying what you can do every single day. Why AGI, Inc. We're a stealth team of elite ex-founders, Stanford and Berkeley AI researchers, and DeepMind alumni. With years of agent research, our platform runs live agent workflows with 99.9% reliability. We are supported by tier-1 investors who funded the first wave of AI giants; now they're backing us to deliver the next, everyday AGI. If you see possibility where others see limits, read on. About the Role You'll be one of the very first engineers shaping our core product and reimagining how people integrate AI companions into their day-to-day workflows. Expect to: Think from zero. Whiteboard the concept in the morning and demo it by evening. Own the stack. Backend, frontend, model orchestration, observability-whatever removes friction between idea and shipped product. Bridge research and delight. Sit beside scientists, translate breakthroughs into polished consumer experiences, and push them to production in days, not quarters. Define the bar. Establish the engineering, design, and reliability standards that every future hire will follow. Move markets. Your features won't live in a sandbox, they'll redefine how everyday people trust and collaborate with AI. You'll be leading initiatives from conceptual design to production deployment, iterating quickly and putting real user feedback at the heart of product decisions. Key Responsibilities Harness frontier LLMs. Turn GPT-5, Llama, and custom models into memory, reasoning, and planning that feel like magic. Craft end-to-end experiences. Design, code, and ship full-stack features. Python, TypeScript, Postgres, GPU infra, whatever it takes. Prototype at lightning speed. Mon: idea. Tue: v1. Wed: users break it. Thu: flawless v2. Engineer for trust. Single-digit-ms paths, sandboxed execution, telemetry everywhere. Invent agentic primitives. APIs, eval harnesses, and safety guardrails that lets new research ship to millions. Listen, iterate, delight. Sit with users, absorb the pain, and turn feedback into joy. You Bring 3-8 yrs shipping zero-to-one or hyper-growth products. At least one live, LLM-powered feature or agent in the wild. Fluency across the stack from React/Svelte down to k8s & GPU queues. Design sense that refuses awkward clicks or dead pixels. Love for in-person collaboration; ready to build in SF. Our Culture 🏢 All in, in person. Work moves faster face-to-face. 🚀 Ship by default. Novel and polished can coexist, speed is the feature. 🤝 One band, one sound. Radical candor, zero politics, help each other win. Our perks 🏥 Fully covered medical, dental, and vision insurance for employees. ✈️ Relocation and immigration support. How to Apply Send us: A link-or 60-sec video-of something you built and why it matters. Your resume or LinkedIn. Two sentences on the hardest problem you've cracked. Every exceptional candidate hears back within 48 hours. We can't wait to see what you've got and to welcome you to the AGI Inc. team! #J-18808-Ljbffr

Santa Fe Springs, CA, USA John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Under the direction of the Manager, direct, supervise, and coordinate hourly personnel in a production, service, or maintenance department, with CNC machining being the primary area of responsibility, in accordance with company policy and practices, operating schedules, and controls for one or more shifts in more than one area of the plant. Direct, supervise, and coordinate hourly personnel across production, service, maintenance, and machining areas, with CNC machining as the primary area of responsibility. Ensure safe, efficient, and high-quality operations in accordance with company policies, operating schedules, and departmental objectives. Oversee daily shop activities including CNC machining, manual machining, assembly, repair/service, and general production tasks. Assign work, prioritize tasks, and provide guidance and support to employees throughout the shift. Maintain strong oversight of CNC operations, including setup practices, tooling needs, machining methods, and issue resolution. Monitor the use of safety devices, enforce safety protocols, and maintain a clean and hazard-free shop environment. Participate in hiring, onboarding, training, and development of production and machining associates. Conduct performance evaluations, recommend wage adjustments, and support employee communications and engagement initiatives. Collaborate with Production Control, Engineering, and Manufacturing Engineering to support machining schedules, drawings, process changes, and tooling requirements. Anticipate production or machining problems and implement corrective actions to minimize downtime or schedule interruptions. Work with vendors and suppliers regarding materials, tooling, equipment, service quality, and delivery schedules. Investigate accidents, equipment issues, and process inefficiencies; recommend improvements for safety, productivity, and cost savings. Prepare and maintain accurate production, machining, and efficiency reports in ERP/MRP systems. Perform additional duties as assigned. Qualifications Minimum 5 years of experience in a manufacturing environment, ideally in CNC machining, assembly, repair/service, or production operations Minimum 2 years of supervisory or team-lead experience in a shop or manufacturing setting Significant hands-on CNC machining experience - CNC is the largest and most critical part of this role. CNC operation and basic setup Tooling knowledge and selection Feeds, speeds, and machine controls Troubleshooting machining issues Experience working in a job-shop or high-mix machining environment. Experience overseeing or coordinating multiple shop areas (machining, assembly, service/repair, test, production) preferred. Demonstrated ability to train, coach, and develop hourly associates. Proficiency with ERP/MRP systems for tracking work orders, labor hours, and machining/production data. Strong verbal and written communication skills. Ability to manage competing priorities in a fast-paced, dynamic environment. Proficiency in Microsoft Office (Word, Excel, PowerPoint, Access, Outlook). High school diploma or equivalent; associate degree or technical certification preferred. Must Be Able To sit for extend periods of time; a minimum of 2 hours. maneuver to all areas of the office. lift up to 35 pounds. bend, reach, kneel, twist, and grip items while working at assigned desk area. have the manual dexterity and coordination to operate office equipment simultaneously manage several objectives and reassign priorities. Compensation: Depending on experience, CNC depth, and supervisory capability. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future.

The Plant Manager is responsible for supervising and coordinating activities of workers engaged in production and delivery of compressed gases, correcting unsafe acts or conditions, and assigning job tasks to workers according to customer needs, curr Plant Manager, Manager, Production, Manufacturing, Management, Worker

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About the Role The Analyst, Corporate Development and M&A will play a critical role in supporting Crusoe's inorganic growth strategy across its core sectors: Power, Industrial Process and Manufacturing, Real Estate and Software. This highly visible position will be deeply involved in all phases of mergers & acquisitions (M&A), strategic investments, and structuring strategic partnerships. The ideal candidate is a high-performing professional with robust financial expertise and transaction experience. The role will report directly to the SVP of Strategic Finance and Corporate Development. This role will be required to be based in San Francisco, CA or New York, NY. What You'll Be Working On Mergers & Acquisitions (M&A) and Divestitures Market Mapping and Origination: candidate will work across the organization's business units and functions in order to identify acquisition targets from a sector-first perspective. This includes creating and maintaining market maps, thematic research projects and direct outreach to targets. Transaction Execution: Support the end-to-end M&A process, including target identification, strategic rationale development, due diligence, valuation, negotiation, and closing. Financial Modeling & Valuation: Build and maintain complex financial models (Valuation and merger model, Accretion/Dilution analyses, and precedent transaction analyses) to evaluate potential acquisition Due Diligence: Coordinate and manage cross-functional due diligence teams (Legal, Finance, Operations, etc.), synthesizing key findings and developing risk mitigation strategies. Work closely with third-party providers. Market Analysis: Conduct industry and competitive landscape analysis within the Industrials, Energy, and Real Estate sectors to identify strategic market gaps and attractive investment opportunities. Prepare and present on transaction rationale to Executive Leadership team (possibly the Board of Directors) Strategic Investments & Partnerships Sourcing and Evaluation: Evaluate strategic investment and partnership opportunities that align with the company's long-term growth objectives. Deal Structuring: Assist in the structuring and negotiation of terms for joint ventures, strategic alliances, and minority investments. Business Case Development: Create compelling investment memorandums and presentations for Senior Leadership and the Board of Directors, outlining strategic fit, financial implications, and execution plans. General Corporate Development Pipeline Management: Help manage and maintain a robust pipeline of potential M&A and investment targets. Commercial-facing Activities: attend conferences and travel to various industry events in order to aid in origination and market intelligence Reporting: Prepare detailed analytical reports and presentations on key market trends, portfolio performance, and deal progress for internal stakeholders. Cross-Functional Collaboration: Partner closely with internal business unit leaders to assess strategic needs and integration plans. What You'll Bring to the Team 1-3+ years of experience in Investment Banking (Analyst or Associate level), Corporate Development, Private Equity, or Transaction Advisory Services. Direct experience working on M&A transactions taking a core role in structuring and modeling various scenarios and preparing transaction screening memos Strong coverage experience or deep sector knowledge within Industrials, Energy, and/or Real Estate is highly preferred. Exceptional financial modeling and valuation skills, with an advanced proficiency in Microsoft Excel and PowerPoint. Outstanding analytical and problem-solving abilities, capable of translating complex financial and strategic analysis into clear, concise, and actionable recommendations. Excellent written and verbal communication skills, comfortable presenting to senior executives and external partners. High degree of professionalism, intellectual curiosity, and ability to manage multiple projects and work effectively under tight deadlines. A proactive, self-starter mentality with the ability to work independently while being a strong team player. Bachelor's degree in Finance, Economics, Accounting, or a related quantitative field. Benefits Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300/month Compensation Range Compensation will be paid in the range of up to $100,000-$140,0000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. #J-18808-Ljbffr

Job DescriptionBenefits: Credit card and cash tips paid out daily Paid time off Employee discounts Flexible schedule Free uniforms Training & development Are you a skilled Massage Therapist looking to make a meaningful impact on weekends? Whether you're building your career or looking for extra income doing what you love, this is your chance to join a wellness-focused, high-performing team that values your craft and cares deeply for your well-being. Were seeking passionate, licensed massage therapists for WEEKEND shifts to join our thriving Plantation location. If you're committed to healing, thrive in a beautiful environment, and want to feel valued at work we want to meet you. Plus, enjoy up to a $500 sign-on bonus! Weekends Include: Friday, Saturday, and Sunday(Select two days within our busiest times) Apply today, and well be in touch with you right away. Responsibilities Share the healing power of touch to inspire and transform through the benefits of massage therapy. Provide therapeutic massage through a variety of modalities (Prenatal, Sports, Stretching Techniques, etc.) Maintain service room to standards. All supplies are provided. Full and Part-Time positions available. Will consider qualified candidates beginning their careers in massage therapy who possess the right qualities and demonstrate an innate talent for and understanding of therapeutic massage. Qualifications Desire to be part of a team that has an infectious passion for health and wellness. License/certification required in state of practice. Must present a license/certificate during the interview process and maintain it throughout employment if hired. Knowledge of Swedish and Deep Tissue Massage and other modalities. Availability during prime earning potential periods including nights, weekends, and holidays. Must be able to stand and exert well-paced mobility for up to 6 hours in length. Length of time of these tasks may vary from day to day and task to task. Must be able to bend, stoop, squat, and stretch to fulfill room resetting tasks and all massage service protocols. Requires grasping, standing, sitting, walking, repetitive motions, bending, climbing, listening, and hearing ability and visual acuity. Requires manual dexterity to use and operate all necessary equipment. Company Overview The NOW Massage was designed as an oasis to disconnect from the outside world and reconnect within. The NOW Massages goal is to offer high-quality, customizable massage services without the time commitment and cost of a traditional spa. The NOW Massages interiors have been recognized by the press and influencers for its elevated aesthetic, inspired by exotic destinations from around the world. With boutiques currently open from coast to coast and steady expansion on the horizon, The NOW Massage is looking forward to bringing its thoughtfully crafted menu, healing products, and signature design to cities all over the United States. For more information, please visit thenowmassage.com. Company Purpose/Mission Self-Care is Essential The NOW is designed as a refuge to help you disconnect from the outside world and reconnect within. We are where you go to turn down the noise so you can listen to what your body needs. We say show up for yourself so you can better support others. Relax your body. Reset your soul. Start NOW. We design our services to be convenient, affordable, and high-quality always. The menu of customizable enhancements makes personalizing your service simple. Our interiors are recognized for their elevated aesthetic, inspired by exotic destinations from around the world. Company Values Brand Truths LIVE IN THE NOW Be Present. Take time to recharge and reconnect within. KINDNESS IS MAGIC Positive energy always. Create a circle of warmth and compassion from welcoming guests to giving back to your community. CARE FOR THOSE WHO CARE FOR OTHERS Foster an environment where team members feel valued, recognized, and rewarded. AUTHENTICITY ALWAYS Open and transparent communication with our inner circle and guests.

A technology company in Sunnyvale is seeking a Staff Hardware Systems Engineer to lead the development of system firmware and kernel-level software for high-performance server platforms. The ideal candidate has over 8 years of experience in hardware systems development and strong expertise in BIOS and firmware engineering. You will directly influence the company's future by enhancing hardware compatibility and performance. Competitive compensation and benefits are provided, including stock options. #J-18808-Ljbffr

The Material Recovery Facility (MRF) Safety Trainer will report directly to the Safety Manager. The MRF Safety Trainer will establish and promote a safe, secure, accident-free and healthy work environment for all Athens Services personnel by working with industrial employees towards the elimination of on-the-job incidents, injuries, accidents, property damage and environmental accidents. The Health & Safety Trainer will be responsible for the implementation, maintenance and enforcement of all training requirements in accordance with Company policies, procedures, operating standards, state and federal laws/regulations, and industry standards/requirements. Additionally, the Health & Safety Trainer assists the operations and its management team to oversee the daily operations to ensure the highest standards of safety and efficiency are followed. Essential Job Functions: Provide On-the-Job training of new employees on the stationery/industrial equipment. Performing job task observations for existing and new employees with hands on demonstrations of the Sorters, Spotters and Maintenance teams. Deliver ongoing training for equipment, PPE, Lock Out/Tag Out, Machine Guarding, Conveyor Safety, Baler Safety, Forklift Safety, Walking on Surfaces and Emergency Procedures Train and evaluate the performance of assigned personnel and recommend removal of applicants from the training program, as appropriate. Operate equipment in accordance with OSHA (Occupational and Safety Health Act) and DOT (Department of Transportation) requirements as well as all local, state and federal laws. Performs pre- and post-trip inspections of assigned equipment and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report). Maintain training documentation and records of all training. Assist in communicating safety expectations. Attend occupational health and safety meetings and re-enforce agenda items and follow up actions. Assist supervisors with any necessary paperwork and is responsible during supervisor's absence. Ensure efficient and excellent customer service is provided to all customers. Assist supervisors with employee observations. Handle special projects and other related management duties as assigned. Perform other duties as assigned. Required Qualifications High School Diploma or G.E.D. Bilingual English/Spanish Knowledge of PPE, Lock Out/Tag Out, Machine Guarding, Conveyor Safety, Forklift Safety, Walking on Surfaces and Emergency Procedures Interpersonal skills using tact, patience and courtesy. Knowledge of principles and practices of supervision and training. Experienced in all Microsoft Office programs (Word, Excel, Outlook, PowerPoint, etc.). Exceptional verbal and written communication abilities (Bilingual English / Spanish). Acceptable Driver Record. Able to meet all DOT requirements. Knowledgeable in OSHA, Federal DOT, and other related state and federal regulations. Must have demonstrated leadership, problem solving and organizational skills. Able to effectively communicate with people. Ability to perform physical requirements of the position with or without reasonable accommodations. Preferred Qualifications Work experience in the waste, environmental services, energy, or transportation industry. Preferred OSHA 30-hour certification. Physical/Environmental Demands: Seeing, hearing, & smelling continuously. Problem solving, oral/written communication, analytical ability, organization, concentration, working with interruptions & interpersonal abilities continuously. Eye/hand coordination, driving, feet (pedals) continuously. Climbing (Stairs/Ladders), standing, walking, fingering (typing), handling (holding), & calculating frequently. Balancing, bending, crouching, kneeling, pushing, reaching, sitting, wrist motion occasionally. Exposure to dust, smoke, fumes, odors, noise, grease, oil, hot/cold temperatures, standing on concrete & vibration continuously. Exposure to electrical hazards, chemicals, and uneven or slippery surfaces occasionally. Works inside & outside. Benefits: Comprehensive benefit package Medical, Dental, Vision 401K & Profit Sharing Employee Assistance Program Life Insurance Paid Vacation and Sick Time Recognition programs Professional development learning Athens will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring Ordinance and any other applicable state, federal or local laws. EEO/M/F/disability/veteran Salary: $68,640 - $108,000/year Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Work Location: In person

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role Crusoe is expanding our hyperscale AI and high-performance computing (HPC) data center portfolio across the U.S. and internationally. As our footprint grows, engineering excellence and system reliability are fundamental to ensuring world-class uptime, performance, and scalability for AI workloads. The Director of Engineering & Reliability will lead the standards, frameworks, and technical governance behind Crusoe's mechanical, electrical, and critical infrastructure systems. This leader owns engineering design standards, reliability strategy, system performance modeling, and asset lifecycle programs across our 50-400 MW hyperscale campuses. This is a high-impact role partnering closely with Construction, Facility Operations, Commissioning, Design/Engineering, and Executive Leadership to ensure Crusoe's data centers achieve world-class reliability, efficiency, and operational readiness. What You'll Work On Build and govern Crusoe's enterprise engineering design standards for mechanical, electrical, and critical infrastructure systems Lead reliability engineering programs including FMEA, RCM, RCA, uptime strategy, and risk modeling Develop asset lifecycle strategies, predictive maintenance programs, and long‑term capital planning Model power, cooling, airflow, and liquid-loop performance to optimize system capacity and readiness Serve as L3 escalation for complex MEP issues and major incidents Lead technical audits, quality assurance programs, and engineering evaluations across all campuses Partner with Construction, Commissioning, and Operations to enable scalable, high-density AI workloads Build and lead a team of MEP and reliability engineers What You'll Bring 10+ years of engineering experience in mission‑critical facilities or hyperscale data centers Strong technical expertise in mechanical and electrical systems (MV distribution, UPS, generators, cooling plants, CRAC/CRAH, liquid cooling) Experience implementing RCM, FMEA, RCA, and reliability engineering programs Ability to govern engineering standards across multi‑site portfolios Strong analytical, modeling, and systems‑thinking capabilities Preferred: PE license (Mechanical or Electrical), CMRP/CRE certification, experience with >50 MW data centers, familiarity with AI/HPC cooling and electrical challenges, experience in high‑growth environments. Benefits Industry competitive pay Restricted Stock Units in a fast growing, well‑funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short‑term and long‑term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300 per month Compensation Range Compensation will be paid in the range of $216,000 - $260,000. Restricted Stock Units are included in all offers. Final compensation is based on experience, education, skills, and internal alignment. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. #J-18808-Ljbffr

MSD is looking for a Safety Manager to join our team! Join Our Team as a Safety Manager - Leading the Way to a Safer Tomorrow Are you passionate about ensuring safety in the workplace and protecting those who contribute to your company's success? We are looking for a dynamic and dedicated Safety Manager to lead and maintain our safety programs, training initiatives, and compliance efforts in a fast-paced and rewarding construction environment. As a Safety Manager, you will be at the heart of our commitment to creating and maintaining a culture of safety, overseeing all aspects of our organizational safety programs, and ensuring strict adherence to OSHA, BWC, and other regulatory requirements. You'll play a key role in improving safety standards, training team members, and fostering a workplace where every individual can thrive in a safe environment. Minimum requirements: Bachelor's degree in Safety Management or related field preferred 7+ years' experience in a construction field preferred Must possess/ able to obtain OSHA 30, 500, 502, & 510 Able to operate productivity software, such as Microsoft Office suite General understanding of Safety and OSHA compliance in a construction environment Able to clearly communicate in written and verbal English Unencumbered US Driver's license US Citizenship or Permanent Resident Status required Key Responsibilities Include: Manage Safety Programs & Training: Oversee and maintain safety programs, including team training, on-boarding for new hires, and continuous safety education for all employees, including supervisory staff. Ensure Compliance & Reporting: Maintain compliance with OSHA, BWC, and other regulations, ensuring timely filing of necessary reports. Incident & Risk Management: Lead incident investigations, manage workers' compensation claims, and ensure injured personnel are appropriately cared for. Address safety concerns at job locations and ensure adherence to safety policies. Safety Advocacy & Recognition: Develop and implement safety recognition programs and track safety performance to continuously improve workplace safety. Safety Leadership & Oversight: Organize safety committee meetings, participate in job bidding processes, and ensure safety policies are incorporated into company operations. Maintain up-to-date safety program handbooks. Ongoing Professional Development: Continuously improve safety knowledge through participation in local, state, and federal safety training programs. Benefits: FREE Training and Education PTO 401(k) match Bonus Program Competitive Medical, Vision, and Dental Health Savings Account match Company paid Short- and Long-Term Disability Company paid Life Insurance Policy We value our employees and are committed to doing everything possible to ensure your continued growth and opportunities! Mechanical Services & Design complies with applicable federal civil rights laws and does not discriminate, exclude people, or treat them differently because of race, color, ethnicity, religion, culture, language, national origin, age, disability, socioeconomic status, sex, sexual orientation, or gender identity or expression in its various programs and activities.