Mechanic jobs at Energy Transfer

* POWER YOUR GREATNESS PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability inclusion & belonging. General Purpose Duties include responsibility for safely and efficiently diagnosing and performing maintenance repairs on equipment used in a surface coal mining operation. Equipment may include: Caterpillar equipment (loaders, scrapers, track dozers, rubber-tired dozers, graders, haul trucks, etc.); LeTourneau loader, Hitachi backhoe; Marion draglines; conveyor and crushing systems; drills (Ingersoll Rand, DrilTech, Schroeder). All work will be performed in compliance with federal and state regulatory requirements to keep the equipment at an acceptable availability and reliability for the mine to meet its budgeted goals in safety, cost, productivity and environmental commitments. Requirements A high school diploma, GED or proof of equivalent. A minimum of three years of industrial equipment journeyman mechanical experience, or a combination of experience and education. Experience with Cummins and/or Caterpillar engines associated with surface coal mining equipment (see above) is preferred. Must successfully pass a written test. Must provide own tools. Additional Information Req Id: 114202 Company Code: PACIFICORP Primary Location: POINT OF ROCKS Department: Power Supply Schedule: FULL TIME Personnel Subarea: [[personnel subarea]] Hiring Range: $45.18/hour This position is eligible for an annual discretionary performance incentive bonus of up to 0.00% of salary. (REMOVE FOR UNION) Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations.

Mechanical Journeyman - Shop, Bridger Coal Company, Point of Rocks, WY #114202 Job Details | PacifiCorp By continuing to use this website you consent to our use of cookies Accept Close Skip to main content * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships Search by Keyword Search by Location * Stay Connected * View All Careers * Why PacifiCorp * Benefits * Inclusion & Belonging * Employee Safety * Required Notifications * Our Workplace and Our Industry * Veterans * Early Careers & Apprenticeships View Profile Search by Keyword Search by Location Select how often (in days) to receive an alert: Create Alert × Select how often (in days) to receive an alert: Mechanical Journeyman - Shop, Bridger Coal Company, Point of Rocks, WY #114202 Apply now " Date: Nov 15, 2025 Location: POINT OF ROCKS, WY, US, 82942 Company: PacifiCorp * POWER YOUR GREATNESS PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability inclusion & belonging. General Purpose Duties include responsibility for safely and efficiently diagnosing and performing maintenance repairs on equipment used in a surface coal mining operation. Equipment may include: Caterpillar equipment (loaders, scrapers, track dozers, rubber-tired dozers, graders, haul trucks, etc.); LeTourneau loader, Hitachi backhoe; Marion draglines; conveyor and crushing systems; drills (Ingersoll Rand, DrilTech, Schroeder). All work will be performed in compliance with federal and state regulatory requirements to keep the equipment at an acceptable availability and reliability for the mine to meet its budgeted goals in safety, cost, productivity and environmental commitments. Requirements * A high school diploma, GED or proof of equivalent. * A minimum of three years of industrial equipment journeyman mechanical experience, or a combination of experience and education. * Experience with Cummins and/or Caterpillar engines associated with surface coal mining equipment (see above) is preferred. * Must successfully pass a written test. * Must provide own tools. Additional Information Req Id: 114202 Company Code: PACIFICORP Primary Location: POINT OF ROCKS Department: Power Supply Schedule: FULL TIME Personnel Subarea: [[personnel subarea]] Hiring Range: $45.18/hour This position is eligible for an annual discretionary performance incentive bonus of up to 0.00% of salary. (REMOVE FOR UNION) Benefits: Health care, retirement, paid time off, tuition assistance, paid short-term and long-term disability, paid bereavement leave. For more information, please visit: ********************************************************************** Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. While marijuana is legal in several states, including Oregon, a positive test for positions in Oregon may disqualify a candidate. The company complies with the laws of Washington and California and only obtains and considers positive tests for marijuana in safety-sensitive positions or those covered by U.S. Department of Transportation regulations. Nearest Major Market: Wyoming

A&P Mechanic Estimated Pay: Up to $1300.00/Week (After Taxes) or $41.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Job Type: Temp-to-hire Benefits: Relocation assistance Experience: Wide-Body: 2 years (Required) License/Certification: Airframe & Powerplant License (Required)) Work Location: In person

A&P Mechanic Estimated Pay: Up to $1300.00/Week (After Taxes) or $41.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Job Type: Temp-to-hire Benefits: Relocation assistance Experience: Wide-Body: 2 years (Required) License/Certification: Airframe & Powerplant License (Required) Work Location: In person

A&P Mechanic Estimated Pay: Up to $1300.00/Week (After Taxes) or $41.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Job Type: Temp-to-hire Benefits: Relocation assistance Experience: Wide-Body: 2 years (Required) License/Certification: Airframe & Powerplant License (Required)) Work Location: In person

Estimated Pay: Up to $1300.00/Week (After Taxes) or $40.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools

Job Description Estimated Pay: Up to $1300.00/Week (After Taxes) or $40.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Powered by JazzHR ixyv0Q0RW3

Description: Job Title: Mechanic Job Grade: 30 FLSA Status: Non-Exempt Reports To: Operations Appraisal Type: Employee Job Purpose: Repairs and maintains diesel engines and equipment. Essential Functions include the following. Other duties may be assigned. Services trucks and trailers and works on lights and air brakes. Services pickups and maintains maintenance. Writes up work orders. Maintains safe and clean working environment by complying with procedures, rules and regulations. Secures tools, materials and equipment at end of day. Maintains all maintenance records. Regular attendance and timeliness. Additional Responsibilities Works on equipment and forklifts, as needed. Requirements: Qualifications and Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or equivalent preferred. Minimum of 2-5 years of experience with vehicle maintenance and/or repair. Valid Class A CDL recommended. Excellent written and verbal communication skills, with the ability to clearly communicate detailed information to coworkers and management with the ability to provide public speaking and customer presentations as needed. Ability to read and interpret documents such as procedure manuals and job instructions and basic problem-solving skills. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to calculate figures and amounts such as proportions and percentages. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to manage time effectively and prioritize tasks to meet deadlines. Strong attention to detail and organizational skills. Ability to use hand tools. Ability to use power tools, such as drill and saw. Ability to operate computer and computer software, to include Microsoft Office products. Ability to use department equipment (e.g. forklifts, tractors and semi-trucks). Ability to maintain confidentiality. Physical Demands and Work Environment: The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand, bend, kneel, climb stairs and walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds for men or 30 pounds for women. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. The work environment is usually an indoor setting with frequent exposure to outside elements. The noise level in the work environment is frequently high. This position requires infrequent travel, which may involve exposure to extreme weather elements. Must Abide by PPE requirements This was reviewed with me and I understand that nothing in this restricts Hess Services, Inc. right to assign, reassign or eliminate duties and responsibilities of this job at any time. This reflects Hess Services, Inc. assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. This job description is not intended as a contract of employment, nor to be construed as a guarantee of employment for any specific period of time or any specific type of work. I agree and acknowledge that my employment is “at will” and can be terminated, with or without cause or notice, at any time by Hess Services, Inc. or myself.

Estimated Pay: Up to $1,300.00/Week (After Taxes) or equivalent to $40/HR Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Preferred Experience Requirements Minimum 3+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Structural Inspection: Perform thorough inspections of aircraft structures according to maintenance manuals and regulatory standards. Repair and Modification: Execute repairs and modifications on aircraft structural components using approved techniques and materials. Assembly and Installation: Assemble and install structural components and systems on aircraft, ensuring precision and adherence to engineering drawings. Documentation: Maintain accurate records of inspections, repairs, and modifications performed, complying with regulatory requirements. Safety and Compliance: Adhere strictly to safety protocols and regulatory guidelines during all tasks and operations. Team Collaboration: Work collaboratively with engineers, technicians, and other personnel to ensure efficient workflow and high-quality aircraft maintenance. Completes any or all structural rework/repair, squawks, and E.O.'s. Perform work of the level described herein, interpret complex blueprints and use arithmetic involving decimals and fractions. Must be able to utilize computer-based systems to perform duties. May be required to work in a confined space. Must be able to utilize computer-based systems to perform duties. Fabricate detail parts from blueprint or engineering instructions Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools

Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available License: Airframe & Power Plant License - Required Experience Requirements B777 Experience Required Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Be able to read, write, speak, and understand the English language. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools (Shadowed and Etched)

Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available Experience Requirements B777 Experience Required Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Be able to read, write, speak, and understand the English language. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools (Shadowed and Etched)

Job Description Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available License: Airframe & Power Plant License - Required Experience Requirements B777 Experience Required Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Be able to read, write, speak, and understand the English language. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools (Shadowed and Etched) Powered by JazzHR IDkeA1nEkk

Job Description Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available Experience Requirements B777 Experience Required Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Be able to read, write, speak, and understand the English language. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools (Shadowed and Etched) Powered by JazzHR wr RLVoIyrd

Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Wide body Aircraft Experience Required (Example: B777, B787, B757, B767, MD11 , B737-800) Be able to read, write, speak, and understand the English language. Technical Skills Structural Inspection: Perform thorough inspections of aircraft structures according to maintenance manuals and regulatory standards. Repair and Modification: Execute repairs and modifications on aircraft structural components using approved techniques and materials. Assembly and Installation: Assemble and install structural components and systems on aircraft, ensuring precision and adherence to engineering drawings. Documentation: Maintain accurate records of inspections, repairs, and modifications performed, complying with regulatory requirements. Safety and Compliance: Adhere strictly to safety protocols and regulatory guidelines during all tasks and operations. Team Collaboration: Work collaboratively with engineers, technicians, and other personnel to ensure efficient workflow and high-quality aircraft maintenance. Completes any or all structural rework/repair, squawks, and E.O.'s. Perform work of the level described herein, interpret complex blueprints and use arithmetic involving decimals and fractions Fabricate detail parts from blueprint or engineering instructions Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools

Job Description Job Type: Contractor Per diem: we offer split pay per diem with weekly pay Hours: overtime is available License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) Wide body Aircraft Experience Required (Example: B777, B787, B757, B767, MD11 , B737-800) Be able to read, write, speak, and understand the English language. Technical Skills Structural Inspection: Perform thorough inspections of aircraft structures according to maintenance manuals and regulatory standards. Repair and Modification: Execute repairs and modifications on aircraft structural components using approved techniques and materials. Assembly and Installation: Assemble and install structural components and systems on aircraft, ensuring precision and adherence to engineering drawings. Documentation: Maintain accurate records of inspections, repairs, and modifications performed, complying with regulatory requirements. Safety and Compliance: Adhere strictly to safety protocols and regulatory guidelines during all tasks and operations. Team Collaboration: Work collaboratively with engineers, technicians, and other personnel to ensure efficient workflow and high-quality aircraft maintenance. Completes any or all structural rework/repair, squawks, and E.O.'s. Perform work of the level described herein, interpret complex blueprints and use arithmetic involving decimals and fractions Fabricate detail parts from blueprint or engineering instructions Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Powered by JazzHR KZA672HPYB

The Flight Line Aircraft Mechanic troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic may supervise the jacking and towing of aircraft, makes adjustments and settings such as cable tension and seat movement settings and adjustments; obtains standard parts such as fuel and oil line connections and fittings, cable linkage, and harnesses by referring to parts manuals and by making comparisons with samples, may perform pre-flight, thru-flight, and post-flight maintenance inspections, enter in the maintenance records description of the work performed, and services engines and aircraft components at line station making repairs, short of overhaul required to keep aircraft in safe operating condition. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E Worker is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Requirements Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications Uses blueprints, schematics, technical drawings and manufacturers' drawings and sketches in the performance of assigned duties May be required to perform Maintenance Operational Checks (MOCs) Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment. Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent-General Educational Development (GED) certificate. (2) years' experience on Military aircraft is required. FAA Airframe & Power plants (A&P) certification and relevant civilian aircraft experience may be substituted. Must be able to meet any Government/Company licensing/qualification requirements for the position

The Avionics Aircraft Mechanic III may supervise lower skilled mechanics and assist with troubleshooting malfunctions in flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Aircraft communications/navigation/electrical systems technicians, CH-53E, install, remove, inspect, test, maintain, and repair systems, components, and ancillary equipment of installed Aircraft Communications/Navigation/Electrical Systems to include Deceptive Electronic Countermeasures (DECM) Systems at the Organizational Maintenance Activity (OMA) level. Must possess a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, and micrometers. Requires working knowledge of technical publications. Receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. Removes, repairs, modifies, tests, troubleshoots, calibrates, and installs electrical systems, equipment and accessories used in aircraft; makes functional checks on electrical systems to ensure performance and reliability and correct malfunctions disclosed by static, ground, and flight tests; and replaces defective wiring and installs new wiring for aircraft changes, modifications and repairs. Overhauls, repairs, modifies and tests aircraft electrical system accessories such as motors, dynamotors, inverters, voltage regulators, relays, cutouts, engine synchronizers, electric motor driven air compressors and activators, DC generators, AC alternators, DC/AC electrical controls, cockpit air conditioning controls, engine temperature controls, and transistorized control equipment, etc. Installs, troubleshoots, calibrates, and tests complex electrical systems and devices on military aircraft to ensure precise performance and reliability of all electrical systems. Sets up test positions using test equipment such as oscilloscopes, audio signal generators, frequency meters, voltmeters, watt meters and ammeters. Tests the various units for compliance with the proper tolerances prescribed for transient time, noise amplitude, and frequencies; adjusts resonant circuits, computes alternative current loads; and makes all necessary adjustments to bring the units up to prescribed operational standards. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conducts maintenance inspections, and performs miscellaneous duties to service aircraft. Assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Quality Assurance Representative (CDQAR) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed. Possess a high degree of expertise of aircraft electrical/avionics systems Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment Must be familiar with operational capabilities and limitations of electrical/avionics systems Possess a thorough working knowledge of the detection, prevention and treatment of corrosion Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications Provides technical assistance, guidance and instruction as Estimates and accesses damage of avionics/electrical components/systems as related to crash and mishap damaged aircraft to include repair and/or replacement, man-hours, parts, components, and materials When assigned to the flight line, provide customer support during launch and recovery and aircraft security as required. Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment. Six (6) years' expereince on Military aircraft is required. AFF Airframe & Powerplants (A&P) certification and relevant civilian aircraft experience may be substituted. Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent General Educational Development (GED) certificate.

The Flight Line Aircraft Mechanic II may supervise lower skilled mechanics and assist with troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E mechanic is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Inspector (CDI) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Performs routine aircraft maintenance functions Must demonstrate an operational knowledge of aircraft, aircraft systems, engines and component parts Operates aircraft towing equipment in towing operations. Maintains aircraft hydraulic systems Must have knowledge of the proper use of hand tools in aircraft maintenance Must be able to read and write, and interpret and comply with aircraft maintenance procedures, manuals, specifications, and directives, guides and forms used on the job Performs preventive maintenance inspections on aircraft and aircraft systems and subsystems Performs troubleshooting, repair, modifications, corrosion control and preservation of aircraft and aircraft systems and aircraft sub-systems, including fuel, oil and pneudraulic systems Overhauls aircraft components and sub-components. Performs functional checks, inspections, troubleshooting as required and trained Completes maintenance documentation accurately using OOMA, and required forms, as required by job assignment Must show proficiency in the use of OOMA within 90 days after assignment High school diploma or equivalent--General Educational Development (GED) certificate Must be skill qualified in a primary MOS from any of the following OccFlds: 6113/6173, Aircraft Maintenance, equivalent skill designation from other services or possess valid FAA Airframe and Power plant Certification. Must have four (4) years' minimum experience rotary wing aircraft

Position Description: The Flight Line Aircraft Mechanic III may supervise lower skilled mechanics and assist with troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, and auxiliary power unit for CH-53E aircraft. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment. The CH-53E mechanic is responsible for inspecting and maintaining rotor airframes and airframe components and performs duties relating to flight line operation. This worker reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Replaces or repairs worn or damaged components, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removes engine from aircraft, disassembles and inspects parts for wear, cracks, security, or other defects, and repairs or replaces defective engine parts and reassembles and installs engine in aircraft. Uses standard aircraft handling and taxi procedures in accordance with (IAW) Naval Aviation Training and Operating Procedures Standardization (NATOPS), specific aircraft manuals, and local regulations, to support the host squadron. Launches aircraft IAW published flight schedules or as needed to support emergencies. Performs Recovery (pre-positioning support equipment and aircraft directing), including hot brake checks, post flight servicing, static grounding (aircraft to ground) and chocks. Performs acceptance, conditional, daily, phase, pre D-Level, post D-Level, special, transfer, turnaround and zonal aircraft inspections and preoperational and periodic inspections on SE IAW Maintenance Requirements Cards (MRC) and NAVAIR technical manuals. Pre/Post-Op checks, fueling and operation of SE, tools, Individual Material Readiness List (IMRL) and Naval Aviation Metrology and Calibration (METCAL) assigned to the Power Line work center, to include conditional/scheduled inspections and periodic maintenance. Performs all duties in accordance with the Naval Aviation Maintenance Program (NAMP) and Commander Naval Air Forces Instruction 4790.2B. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, conduct maintenance inspections, and perform miscellaneous duties to service aircraft. This incumbent assists with the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, required to keep aircraft in safe operating condition. Performs duties of a Collateral Duty Quality Assurance Representative (CDQAR) and ensures all maintenance is performed and inspected in accordance with the NAMP and is accountable to the quality assurance officer and aircraft maintenance officer within the Maintenance Department. Requirements Responsible for quality of aircraft, aircraft component, component repair and overhaul. Responsible for procedural compliance of Services directives and standards. Inspects Company areas for housekeeping, safety, and environmental regulatory compliance Performs technical inspections of aircraft, aircraft components and equipment Performs quality technical inspection of aircraft, aircraft components, parts, repairs, and systems (including avionics, electrical, instrument and armament) as required by functional assignment Performs quality and safety inspections of on-site equipment and tools used in aircraft maintenance Performs initial, in-progress and final quality technical inspections during maintenance, repair, modification, rework, and overhaul of aircraft, aircraft components, and component parts Maintains aircraft forms and records using the Optimized Naval Aviation Logistic Management Information System (OOMA) Must be skill qualified in a primary MOS from any of the following OccFlds: 6113/6173, equivalent skill designation from other services or possess valid FAA Airframe and Powerplant (A&P) Certification. Six (6) years' minimum experience as a Collateral Duty Inspector (CDI) on Military Aircraft or 6 years FAA Inspection Authorization (IA) experience Must have four (4) years' minimum experience rotary wing aircraft