Energy Transfer jobs in San Antonio, TX

- 20 jobs

Terminal Operator
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Summary: Under general supervision of Terminal Supervisor, the Terminal Operator is responsible for operating all Terminal equipment in connection with receiving, storing, transferring, and loading of refined petroleum products in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Answer and respond to after-hour calls (24 hours per day / 7 days per week). * Assume responsibility for filter changes and all valve alignments (manifolds and tanks) inside the terminal property to assure the proper handling, storage and integrity of products. * Use the Terminal Automation System to prepare daily inventory reports, terminal balance report and rack activity report. * Forward daily inventory and accounting reports to the appropriate customers. * Ensure that the customers receive information needed regarding their throughput and inventory. * Sample and analyzes product as instructed by the Terminal Manager. * Upkeep loading rack equipment (mechanical and electrical) in clean and good working order at all times. * Interact with drivers to make sure they follow all company and safety regulations. * Assume responsibility to train new drivers and make sure they are familiar with our automation, loading equipment and emergency features. * Conduct safety watches with outside contractors as advised by the Terminal Manager. * Is a self-starter and willing to adapt to changing conditions. * Ensure all environmental and safety equipment is working properly. * Keep overall appearance of terminal up and grass mowed and edged. * Ensure compliance with federal and state regulations. Reduce potential risk to public safety and environment and minimize company liability. * Noncompliance of government regulations can result in multi-million-dollar fines and possible criminal penalties. * Improve operations efficiency and financial profitability through well maintained facilities Required Education: * High school diploma or GED Minimum Requirements: * No experience required * Excellent verbal and written communication skills * Excellent PC skills, with proficiency in Microsoft products * Strong attention to detail, with the ability to independently proof work for accuracy * Expected to exercise good judgment * Initiative and organizational abilities required for meeting deadlines and establishing priorities * Expected to maintain good working relationships with all Company personnel, customers and contract personnel * Ability to manage time and scheduling to meet appropriate deadlines * Ability to work successfully in stressful situations and manage multiple tasks * Ability to use awareness of relationships and impacts of data trends and elements to appropriately recommend actions that impact both near and long-term company operations and profits * Ability to take directions from supervisors Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Climbing at least 60 feet on stairs at least a few times per week. * Climbing at least 7 to 11 feet on ladders or scaffolding at least a few times per month. * Lifting objects weighing up to 50 lbs. at least a few times a week, with the expectations that an employee can lift up to 100 lbs. with assistance, when needed. * Carrying objects weighing up to 25 lbs. for up to 50 feet on a weekly basis. * Walking 100 yards or more over 10 times throughout the day, with the expectations that employees could walk regularly up to 300 yards at a time for a total of 2 miles or more during a shift. * Walking on steep inclines for up to 15 minutes at a time. * Working in a crouching position several times per day for up to an hour at a time. * Bending and stooping several times per day for up to 30 minutes at a time. * Bending and twisting for up to 30 minutes at a time, including manually digging with shovels. * Standing in one place for up to an hour at a time. * Sitting for up to two hours at a time. * Ability to wear all appropriate personal protection equipment, such as safety shoes, safety glasses, hard hat, flame-resistant clothing, hearing protection, respirator/breathing apparatus, and/or fall protection, as required by the job activities. * Ability to use or operate the hand tools, power tools, precision tools, measurement devices and other tools or equipment required by the job activities. Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required
$35k-42k yearly est. 1d ago
Field Service Technician
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
USA Compression Partners, LP, (NYSE: USAC) provides mission-critical natural gas compression services to large upstream and midstream energy companies. We are an operations-centric, technology-driven employer with 800+ employees in 18 states across the US. We owe our success to the quality of our employees, our strong commitment to safety, and our superior service to our customers. Summary A Field Service Technician (FST) is responsible for maintenance and service of USA Compression equipment reporting to the Area Service Manager (ASM). With minimal supervision and significant autonomy, the typical areas of responsibility include safely performing scheduled maintenance, maintaining and building customer relationships, and providing first line support for equipment troubleshooting. USA Compression employees are proudly responsible for maintaining a safe and professional work environment and positive workplace aligned with our Pillars culture. Duties and Responsibilities * Ensure routine maintenance plan in place and minimize down time on all assigned equipment. * Understand and follow company handbook, and all company or customer safety and environmental policies. * Maintain run time of natural gas compression units per contractual agreements. Accurately gather and prepare data for reports critical to unit operations on regular due dates. * Respond quickly to ASM or customer inquiries. * Oversee and/or participate in the installation of compression units and customer with installations. * Work closely with the Lead Service Tech and ASM on major repairs; escalate when necessary based on protocol. * Maintain and operate company vehicle according to company guidelines. * Work with sales team to identify new sales or equipment opportunities. * Maintain and/or partner with a parts department to ensure sufficient parts inventory for each unit. * Keep each assigned unit clean following good housekeeping rules and maintain safe working conditions. * Any other duties or responsibilities as assigned by supervisor. * Full-time hourly position Skills/Capabilities and Education * Technical or trade school certification or additional work experience in related field. * Prefer at least 2 years of experience in gas compression with preference to CAT, Ariel and/or Cummins certifications and experience. Depending on the equipment assigned, this role may maintain large or small horsepower units, gas lift or traditional compression units along with other related equipment associated with our business. * Valid driver's license with a Motor Vehicle Record history acceptable to USA Compression. * Solid professional communication/interface skills with customer field personnel, onsite vendors, and other employees. This role is often the USAC position with the most customer interaction. Excellent customer service and positive communication skills are critical to the success in the FST role. * Ability to be self-managed and work independently with little or no supervision. * High degree of mechanical ability. * Experience reading and understanding technical manuals. * Capable of safely driving commercial size truck * Experience in configuring natural gas compression equipment. * Ability and flexibility to work extended hours including periodic on-call weekends. * Ability to understand written and verbal communication from the company and supervisor including training, procedures, instructions, etc. * Applicant must have the ability to legally work in the U.S. Work Conditions * Typically, an FST's work day consists of driving a USA Compression service vehicle to customer locations to perform repair and maintenance activities. * Periodic lifting requirements in excess of 50 lbs. * Ability to stand and walk on uneven and varied terrain, climb ladders and stairs; and stoop, squat, kneel, crouch and crawl depending on the task requirements. * Exposure to extremes in temperature and weather conditions depending upon assigned location. * Some exposure to high noise levels in excess of 85dBA that require ear protection, as well as exposure to potentially hazardous chemicals and materials. * Working conditions in natural gas compression vary from one job site to another. Some job sites are indoors in compressor stations while other sites are outside, exposed to a variety of weather conditions. * There is a strong emphasis on safety while working with heavy equipment and machinery
$69k-96k yearly est. 60d+ ago
Terminal Controller Trainee
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Position Summary: This position is responsible for monitoring and supporting all load rack activities related to the TopTech terminal automation system. 12-hour shifts and on call status is required, 24/7 ~ 365-day operation, rotating 12-hour shifts, including nights, weekends and holidays. Position Accountabilities: * Monitor terminal automation systems and advise field personnel when a terminal is in need of attention. * Track product movements to help reduce the chance of terminal outages or possible overfills. * Support troubleshooting of the terminal control system with the assistance of Information Services and/or field personnel. * Perform daily terminal balances. * Work closely with internal and external customers to satisfy specific requirements and to correctly apply Sunoco's practices, policies and procedures. * Implement measures to assure the operational integrity of the terminals and maximize efficiency of terminal operations. * Complete yearly field training curriculum Education Requirements: * High school degree required * College degree preferred Experience Requirements: * No experience necessary * Excellent verbal and written communication skills with strong interpersonal skills required * Excellent PC skills, with proficiency in Microsoft products required * Strong attention to detail with the ability to proof work for accuracy * Basic knowledge of petroleum products and industry terminology required * Effective analytical and problem-solving skills * Ability to coordinate effectively and with other personnel, corporate departments, as well as, with external customers required * Ability to prioritize and handle multiple tasks and projects concurrently, managing time and scheduling to meet appropriate deadlines * Ability to take directions from supervisors and work in a team environment required Ability to work independently with limited supervision and independently conduct job accountabilities An equal opportunity employer/disability/vet Energy Transfer is an equal opportunity employer and does not discriminate against qualified applicants on the basis of actual or perceived race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by law. The nature and frequency of the above working conditions and requirements may vary depending on individual operational circumstances. Where feasible, the Partnership will make reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. DISCLAIMER: The statements listed in this job posting, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.
$90k-120k yearly est. 31d ago
Lead Designer I&E
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Position Summary: This position will be responsible for leading design and drafting services for the electrical/instrumentation/controls (EIC) aspects of capital projects. These projects are primarily for Pipelines and Terminals, located in the US. Major Accountabilities: * Coordination of multiple design projects within a fixed schedule. * Adapts departmental plans and priorities to address resource and/or operational challenges. * Project responsibilities: Initial drawings and preliminary scope development; equipment specifications; construction drawings; bid packages; material takeoffs; technical support; construction inspection; as-built documentation; and project closeout. All this on time and in a safe, reliable and efficient manner. Work with/for Sunoco electrical engineers, project managers, designers/drafters, Sunoco operations, Sunoco maintenance, engineering service providers, customers, contractors, vendors, and inspectors. Must communicate and interact effectively with other company/contract disciplines to execute projects. This includes ensuring that multi-disciplined areas of the project are well coordinated and designed appropriately. * Document facility changes and comply with the Company's Process Safety Management program. * Manages complex E/I design, preliminary equipment studies, electrical equipment layout, complex conduit routing, standard detail design development and light structural /concrete detailing. * Provide technical support and/or guidance to all pipeline departments that will result in safe, efficient and cost-effective installations. * Ensure CAD files and equipment files are maintained per company standards. * Ensure design project complies with required codes, safety standards, specifications, work scope and construction drawings. * May be required to travel on occasion to collect field data, to field verify existing drawings and to provide technical assistance to field construction. * May serve as a resource to others in the resolution of complex problems and issues. * Performs other related duties as assigned. Education Requirements: * High School Diploma required. * Associate's or Bachelor's degree in Drafting Technology or Electrical/Instrumentation Technology is preferred. Experience Requirements: * Preferred 10 years of design experience in electrical/instrumentation/controls (EIC) required. * Experience in terminal/pipeline/ engineering environment highly preferred. Previous leadership responsibilities preferred. * Experience in industrial electrical/instrumentation construction with drafting knowledge is preferred. * Must possess and maintain TWIC certification. * Proficiency creating design drawing packages using AutoCAD. * Preferred experience in CadWorx 3D and CadWorx P&ID. * PC skills with proficiency in Microsoft products including Word, Project, Outlook, and Excel. * Effective analytical and problem-solving skills, strong attention to detail with the ability to proof work for accuracy, and the ability to prioritize and handle multiple tasks and projects concurrently to meet deadlines as required. * Knowledge of motor control components and schematic drawing development and for across-the-line starters and variable frequency drives up through 5kV. * ISA, NEC and API 500 code knowledge. This includes extensive experience in hazardous (classified) locations (Class 1 areas). * PLC cabinet design and wiring development, industrial networking and HMI systems. * Piping and Instrument Diagram symbology (P&ID's), I&E installation detail drawings, one-line diagrams, cable schedules, instrument plans, PLC panel layout drawings, loop diagrams, ISA data sheets, etc. * Instrumentation including pressure, temperature, flow, level, and metering and analytical instrumentation. * Electrical power distribution (12.47-34.5kV) is beneficial but not required. * Ability to work efficiently and effectively in a team environment. * Verbal and written communication skills, strong interpersonal skills capable of taking initiative and making decisions.
$102k-134k yearly est. 60d+ ago
Supervisor - Construction
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
The Construction Supervisor leads the efforts in executing the initial scope review, cost estimating and construction activities for projects assigned. WBS preparation, project cost forecasting and final project documentation are also involved in this project management role. As project manager, this role will ensure that all projects are executed following all company policies and standards. Essential Duties and Responsibilities: * Detailed knowledge of company policies and procedures, industry practices, construction standards, welding procedures, and OSHA rules and regulations. * Prepare and submit project scopes, cost estimates, AFE's, completion reports, job books, etc. * Supervise construction activities and contract personnel for successful execution of projects during planning, construction, installation, cleanup, commissioning and start up phases. * Lead role in bid process including bid evaluations, contractor and inspection service selections * Ensure project objectives are met during the construction phase including safety, environmental, security, quality, schedule, cost controls and community relations. * Excellent communication and organizational skills. * Self-motivated. Requirements: Education and/or Experience, Knowledge, Skills & Abilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements for this position are listed below: * High School or GED certificate required * Minimum 8+ years related experience which should include a good knowledge of Industry Practices, construction standards, welding procedures, pipeline maintenance and operations, and the use and interpretation of pipeline schematics, as-builts, blueprints and construction drawings. * Working knowledge in the use of Microsoft Office and Microsoft Project Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Usually, normal office working conditions * Must be able to remain in a stationary position 50% of the time due to prolonged periods of driving, walking, sitting or standing * Must be able to lift up to 50 lbs occasionally * Occasional overnight travel may be required * Occasional visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment.
$67k-88k yearly est. 60d+ ago
Intern - GIS
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. This is a twelve (12) week paid internship program beginning May 2026. You must be currently enrolled in an undergraduate or graduate degree program with an expected graduation date in Fall 2026 or Spring 2027. SAN ANTONIO, TX We are seeking a detail-oriented and driven GIS Intern to support our Geographic Information Systems (GIS) initiatives in the Midstream Oil & Gas sector. This internship is an excellent opportunity to gain hands-on experience applying geospatial tools in pipeline operations, asset tracking, and regulatory compliance. You'll work closely with our GIS, engineering, and operations teams to support mapping and data management needs across a range of infrastructure projects. Essential Duties and Responsibilities: * Assist with the creation, editing, and maintenance of pipeline and facility GIS data. * Support integrity management efforts by mapping pipeline inspection data (ILI, hydrotest, etc.). * Contribute to the development of cartographic products, including alignment sheets and system maps. * Integrate GPS field-collected data into enterprise GIS systems. * Support web-based GIS platforms such as ArcGIS Online or enterprise Portal environments. * Document GIS processes, workflows, and metadata. Required Skills: * Cumulative GPA of 3.0 or higher * Enrolled in or recently graduated from a degree program in GIS/ Geography * Proficiency with GIS software such as ArcGIS Pro * Understanding of geospatial data structures, coordinate systems, and basic cartography. * Strong attention to detail and ability to interpret technical drawings and data. * Proficiency in Microsoft Office, especially Excel. * Excellent communication and teamwork skills. Special Considerations: * Exposure to the oil & gas industry, particularly midstream/pipeline operations. * Familiarity with regulatory data such as HCA, Class Location, or MAOP. * Experience working with linear referencing systems (LRS). * Basic programming or scripting experience in Python or SQL. * Familiarity with GPS/mobile data collection tools (e.g., Collector, Survey123).
$54k-68k yearly est. 19d ago
Electrical Reliability Engineer/Sr Electrical Reliability Engineer
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent, and we are committed to making your job a challenging and rewarding experience. Summary: This position will be responsible for developing and providing maintenance expertise to operations and project engineering. The position will manage the electrical preventative maintenance program for pipelines and terminal facilities located in the US and some international locations. Essential Duties and Responsibilities * Work with/for Sunoco project managers, Sunoco Terminal Reliability group, Sunoco operations, Sunoco maintenance, contract engineering firms, customers, contractors, vendors, and inspectors. Must communicate and interact effectively with other company/contract disciplines to execute the maintenance program. * Supervise contract personnel, engineering firms, integrators, vendors, and/or electrical contractors as needed to perform these functions. * Develop Preventive Maintenance Plans for electrical equipment * Develop standard procedures and checklists for preventive maintenance activities on electrical equipment that can be loaded into CMMS * Develop and maintain a list of qualified vendors to perform electrical maintenance * Evaluate, properly apply and provide training for vendor's products. * Excellent verbal and written communication skills, strong interpersonal skills capable of taking initiative and making decisions. * Excellent PC skills with proficiency in Microsoft products including Word, Project, Outlook, and Excel. * Effective analytical and problem-solving skills, strong attention to detail with the ability to proof work for accuracy, and the ability to prioritize and handle multiple tasks and projects concurrently to meet appropriate deadlines are required. * Work independently with little supervision. * Maintain Asset Inventory data for existing electrical equipment * Support Site MOC process, including Reliability approval of new or modified electrical system designs and changes to electrical system care plans. * Lead reliability investigations for electrical equipment failures, including proper application of RCA process and corrective action plans. * Collaborate with Operation's Leaders to understand and set priority for electrical equipment/system repairs impacting reliability. * Build strategy around electrical reliability system training and knowledge support; Creates and delivers training to develop the technical capabilities of the maintenance and operations team * Identify programs and initiatives around overhead electrical distribution lines to drive reliability improvements. * Technical expertise: Strong knowledge and understanding of electrical systems, equipment, and components including electrical transformers, switchgear, MCC, VFD and electric motors is essential. * Electrical Reliability - Technical Duties: * Manage budget and cost tracking for individual maintenance programs * MV VFDs * Oil Filled Transformers * MV Switchgear Overhauls * IR Scanning * Perform facility assessments to monitor/record condition of electrical equipment and verify/update facility electrical documentation (one-lines, area classification, arc flash labeling, etc.) * Develop Facility PM plans based on electrical equipment condition and equipment risk assessment * Assist with scheduling and interpreting arc flash studies * Assist with critical spare parts program (ie VFD) * General electrical engineering support * Role would support both business units * Will be required to travel approximately 30%. Requirements: Education and/or Experience, Knowledge, Skills & Abilities: * Bachelor of Science Degree in Electrical Engineering. * PE is preferred. Required experience is commensurate with the selected job level: * The Engineer level requires a Bachelor's degree in an engineering discipline and 3-6 years of relevant job-related experience * The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 6-10 years of relevant job-related experience * Minimum 5 years of electrical/instrumentation/controls (EIC) engineering and project management experience in a terminal/pipeline/petrochemical/offshore engineering environment. * Motor Control and variable frequency drives up through 5kV. * NEC and API 500. This includes extensive experience in hazardous (classified) locations (Class 1). * NFPA 70E and 70B knowledge * Piping and Instrument Diagrams, construction drawings, one-line diagrams, cable schedules, PLC panel layout drawings, loop diagrams, ISA data sheets, etc… Preferred Qualifications (not required): * Beneficial Experience (but not required): Electrical power distribution (12.47-34.5kV), power modeling tools (SKM, Etap) * Predictive and preventative maintenance care plans, and electrical distribution ITPM programs Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Normal office working conditions and field work * Must be able to remain in a stationary position 50% of the time due to prolonged periods of sitting or standing. * Occasional overnight travel may be required. * Visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment will occur.
$100k-129k yearly est. 23d ago
Specialist - IT Terminal Automation
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Position Summary Position will be responsible for implementing projects and providing daily support of automation systems for loading and off-loading terminals. Primary duty will be PLC configuration and programming related to automation systems. Duties will include automation troubleshooting, installation, and general technical system support. Will provide support of critical production systems, 7x24, to ensure continuous system availability. Activities include direct end user contact with terminal operations, corporate personnel, and vendors. Major Accountabilities * Configure, program, implement and maintain PLC systems including related applications, hardware, interfaces, and communications. * Collect, interpret and document requirements to develop new or modify existing solutions. * Develop and implement automation system changes and enhancements. * Provide support of critical systems, 7 days-a-week, 24 hours a day, to ensure continuous availability. * Perform research and maintenance activity, including vendor coordination to ensure that expected service levels and objectives are met. * Maintain broad understanding of information technology and business processes in order to assess impact and prioritize activities. * Responsible for solving difficult to complex technical issues. * Expected to continually expand scope of knowledge. * Expected to work effectively with other I/S disciplines and operations team members, and bridge gaps as necessary. * Travel - Must be willing and able to travel as required by the demands of the position, up to 20% of the time, but may be higher during critical project assignments. * Work assignments at remote sites will require outside work in all types of weather conditions. * Must be willing to work overtime when needed, including occasional weekend work Education Requirement * Bachelor's degree in Engineering, Computer Science, Information Technology, or related field preferred; extensive work experience with PLC programming and terminal automation systems may be considered in lieu of degree. Experience Requirement * 2-5 years of relevant technical experience, including PLC programming and support * Effective analytical and complex problem-solving skills. * Ability to prioritize and handle multiple tasks and projects concurrently, managing time and schedule to meet appropriate deadlines. * Strong interpersonal skills for communication with a diversified user community and outside vendors. * Ability to identify an issue, analyze and research the problem, and formulate a solution * Ability to identify, isolate, and repair equipment and software affecting service for all supported locations. * Available for 24 x 7 support as needed. * Ability to take directions from supervisors and work in a team environment. Preferred Qualifications: Experience in several of these areas preferred: * Support of PLCs deployed in petroleum industry * Ability to read and understand P&ID drawings * Field instrumentation and electrical systems. * Terminal system pre-set and metering technologies. * Basic knowledge of petroleum operations and industry terminology. * Working knowledge of networks and Microsoft Windows * Relational Databases, such as SQL or Oracle and PL/SQL * Linux, Unix, or QNX * MS Office Products CANDIDATES WITH GREATER QUALIFICATIONS MAY BE CONSIDERED FOR A HIGHER LEVEL POSITION
$60k-83k yearly est. 17d ago
HC - Operator - Crane - Hyd <80T
Fluor 4.5
San Antonio, TX job
At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. **Job Description** Follow all health, safely, and environmental requirements; Perform cleanup duties; Perform material handling and storage duties; Identify, use, and care of common hand and power tools; Use and care of craft specific tools and equipment; Knowledge and application of craft related mathematics; Knowledge and use of safety standards and best safety practices relevant to rigging, Inspection of rigging equipment and hardware; Knowledge and application of common hitches, Emergency stop signal, Basic crane hand signals, Knot tying (bowline & clove hitch), and use of rigging equipment relevant to craft specific tasks; Identify equipment types; Perform equipment inspection, service and maintenance as required; Read and use equipment operator's manual; Assist with scheduled service and maintenance; Perform equipment assembly and disassembly; Assist with critical lift design as required; Calculate capacities from load/capacity chart; Inspect rigging configuration for safe lifting operations; Selection of equipment for safe lifting operations; Perform critical lifts as required; Identify components and controls of equipment; Ability to respond to equipment emergency procedures; Requires valid certification to operate crane(s) and proven, verifiable experieince as a crane operator. NCCCO certification(s) preferred and may be required.; Observes load hook up and determines safety of load.; Manipulates crane controls to reguulate speed and direction of crane and hoise movement according to written, verbal, or signal instructions.; Cleans and maintains crane and hoisting mechanism(s).; Inspects crane for defective parts and notifies supervision of defects/malfunction.; Loads, transports, and unloads materials, tools, equipment and supplies. May assist in lifting, positioning, and securing materials and work pieces during installation.; Performs minor maintenance or cleaning activities of tools and equipment.; Safely operates crane and hoist mechanism(s); plans and coordinates crane movement and set up.; Four (4) years minimum industrial construction crane operation experience preferred. Heavy Civil highway construction experience preferred. All other duties as assigned. **Job Requirements** **Mental Demands** : Understand and carry out oral instructions; Read and carry out written instructions to perform work tasks; Work at varying heights; Recognize, avoid, and report safety hazards; Assemble and disassemble objects; Operate equipment and power tools **Physical Demands** : See hazards, safety warnings, and barriers; Bend knees for lifting and routine work tasks; Stoop for work positioning and lifting to perform work tasks; Lift maximum 50 lbs without assistance; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings; Climb/balance on ladders, scaffolding, and structures for work tasks; Kneel for work positioning and work task performance; Reach above shoulders and away from body to perform work tasks; Demonstrate manual dexterity to perform work tasks **Working Conditions** : Work in extreme heat or cold; Work where noise level is above 85 decibels; Work in wet/humid environment; Work in cramped quarters; Work in environment of fluctuating ventilation; Work inside and outside We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary:
$47k-70k yearly est. 12d ago
Infrastructure Quality Technician
Fluor 4.5
San Antonio, TX job
At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. **Job Description** The purpose of this position is to work on general activities associated with supplier quality surveillance such as tracking Quality metrics and providing consistent reporting. This role assists and supports the Quality specialists and engineers as requested. - Maintain supplier quality surveillance (SQS) logs and input to databases (such as MatMan, SAP, Invoice commitment, etc.) - Perform support of basic SQS activities - Stay current/updated with technical and functional developments in area of specialty through continuing education, conferences, and periodicals, for example, and continue to develop in-depth specialization, if desired - Participate in Fluor University for training and career development - Maintain compliance with all applicable policies, procedures, and global standards - Plan, organize, and carry out assignments as directed - Other duties as assigned **Basic Job Requirements** - A combination of education and directly related experience equal to two (2) years; some locations may have additional or different qualifications in order to comply with local requirements - Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors - Job related technical knowledge necessary to complete the job - Ability to attend to detail and work in a time-conscious and time-effective manner **Other Job Requirements** **Preferred Qualifications** - Accredited four (4) year degree or global equivalent in engineering/technical field of study preferred - One (1) year of related quality assurance/project experience - Basic to intermediate computer and software skills to include the use of word processing and email as well as the basic use of spreadsheets and electronic presentations - Oral and written communication and computer skills - Basic interpersonal skills - Basic leadership and decision-making skills We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Benefits Statement: Fluor is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental and vision plans, EAP, disability coverage, life insurance, AD&D, voluntary benefit plans, 401(k) with a company match, paid time off (personal, bereavement, sick, holidays) for salaried employees, paid sick leave per state requirement for craft employees, parental leave, and training and development courses. Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Notice to Candidates: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references, passport verifications and Global Watchlist screening. To be Considered Candidates: Must be authorized to work in the country where the position is located. Salary Range: $45,000.00 - $82,000.00
$45k-82k yearly 40d ago
I35 NEX HC - Carpenter - Form/Structures
Fluor 4.5
San Antonio, TX job
At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. **Job Description** Follow all health, safely, and environmental requirements; Perform cleanup duties; Perform material handling and storage duties; Identify, use, and care of common hand and power tools; Use and care of craft specific tools and equipment; Knowledge and application of craft related mathematics; Knowledge and use of safety standards and best safety practices relevant to rigging, Inspection of rigging equipment and hardware; Knowledge and application of common hitches, Emergency stop signal, Basic crane hand signals, Knot tying (bowline & clove hitch), and use of rigging equipment relevant to craft specific tasks; Read and interpret drawings and construction plans.; Measure, cut, assemble wood and metal forms for concrete pours using pencil, chalk, marking gage; prepares layout using rule, framing square, calipers. Constructs forms and chutes for pouring concrete.; Ensure forms are properly aligned and secured.; Pour and finish concrete within forms.; Dismantle forms after concrete has set following appropriate cure time and release by quality control or applicable DOT. **Job Requirements** **Mental Demands** : Understand and carry out oral instructions; Read and carry out written instructions to perform work tasks; Work at varying heights; Recognize, avoid, and report safety hazards; Assemble and disassemble objects; Operate equipment and power tools **Physical Demands** : See hazards, safety warnings, and barriers; Bend knees for lifting and routine work tasks; Stoop for work positioning and lifting to perform work tasks; Lift maximum 50 lbs without assistance; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings; Climb/balance on ladders, scaffolding, and structures for work tasks; Kneel for work positioning and work task performance; Reach above shoulders and away from body to perform work tasks; Demonstrate manual dexterity to perform work tasks **Working Conditions** : Work in extreme heat or cold; Work where noise level is above 85 decibels; Work in wet/humid environment; Work in cramped quarters; Work in environment of fluctuating ventilation; Work inside and outside We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary:
$40k-53k yearly est. 60d+ ago
I35 NEX HC - Trk Driver - Concrete
Fluor 4.5
San Antonio, TX job
At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. **Job Description** Follow all health, safely, and environmental requirements; Perform cleanup duties; Perform material handling and storage duties; Identify, use, and care of common hand and power tools; Use and care of craft specific tools and equipment; Knowledge and application of craft related mathematics; Knowledge and use of safety standards and best safety practices relevant to rigging, Inspection of rigging equipment and hardware; Knowledge and application of common hitches, Emergency stop signal, Basic crane hand signals, Knot tying (bowline & clove hitch), and use of rigging equipment relevant to craft specific tasks; Read and use vehicles operator's manual; Identify vehicle safety equipment; Inspect all vehicle systems before start-up; Perform proper vehicle start-up, operation, and shutdown procedures; Perform care and cleanup of vehicle; Perform vehicle inspection, service and maintenance as required; Position may require Commercial Drivers License (CDL) with additional endorsements depending on vehicle type and/or purpose; Perform concrete load/unload activities; Perform load documentation reporting as required; Minimum 2 years experience in ready mix concrete truck with Class A or B CDL and clean MVR.; Operate truck to transport wet concrete is mix truck to site; operate levers/chute outside of truck to load and discharge concrete.; Complete proper washout in designated area after completed pout and upon returning to yard from field operations.; Maintains highest standard of quality of concrete load and safety in all aspects of transportation of wet mix concrete and the job.; Operate up to 80,000 lbs of ready mix concrete and truck combination weight in a timely manner and timely transportation of mix to and from destinations, ensuring quality of load.; Prepare, receive, and provide proper/appropriate documentation at all times.; Daily inspections, both pre- and post-trip, and keep truck washed down with excess concrete off the truck and out of the barrel; must be able to climb onto the truck to wash out.; All other duties as assigned. **Job Requirements** **Mental Demands** : Understand and carry out oral instructions; Read and carry out written instructions to perform work tasks; Work at varying heights; Recognize, avoid, and report safety hazards; Assemble and disassemble objects; Operate equipment and power tools **Physical Demands** : See hazards, safety warnings, and barriers; Bend knees for lifting and routine work tasks; Stoop for work positioning and lifting to perform work tasks; Lift maximum 50 lbs without assistance; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings; Climb/balance on ladders, scaffolding, and structures for work tasks; Kneel for work positioning and work task performance; Reach above shoulders and away from body to perform work tasks; Demonstrate manual dexterity to perform work tasks **Working Conditions** : Work in extreme heat or cold; Work where noise level is above 85 decibels; Work in wet/humid environment; Work in cramped quarters; Work in environment of fluctuating ventilation; Work inside and outside We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary:
$45k-74k yearly est. 47d ago
Infrastructure Construction Engineer
Fluor 4.5
San Antonio, TX job
At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. **Job Description** Support the construction efforts by providing technical support to craft and supervision as well as helping to satisfy quality requirements on the project. Initiate action when necessary to ensure the project is being built as specified in the scope of work. - Evaluate, select, and apply standard construction engineering techniques, procedures, and criteria, using solid engineering judgment in making decisions - Supervise or coordinate the work of engineers, technicians, and other personnel who provide assistance on specific assignments - Assist craftsmen, foremen, and project supervision with regard to construction-related issues identified on drawings - Coordinate the completion of construction activities in assigned systems and prepares punch lists to ensure the readiness of systems for release for turnover to the client or for start up - Other duties as assigned **Basic Job Requirements** - Accredited four (4) year degree or global equivalent in engineering field of study and six (6) years of work-related experience; a recognized certification or registration in the applicable field, if required; some locations may have additional or different qualifications in order to comply with local requirements - Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors - Job related technical knowledge necessary to complete the job - Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines - Ability to attend to detail and work in a time-conscious and time-effective manner **Other Job Requirements** **Preferred Qualifications** - Construction Management degree or global equivalent - Typically has four (4) years of project experience - Ability to speak/read multiple languages - Excellent oral and written communication skills - Basic or intermediate computer and software skills to include the use of word processing and email as well as the basic or intermediate use of spreadsheets We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Benefits Statement: Fluor is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental and vision plans, EAP, disability coverage, life insurance, AD&D, voluntary benefit plans, 401(k) with a company match, paid time off (personal, bereavement, sick, holidays) for salaried employees, paid sick leave per state requirement for craft employees, parental leave, and training and development courses. Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Notice to Candidates: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references, passport verifications and Global Watchlist screening. To be Considered Candidates: Must be authorized to work in the country where the position is located. Salary Range: $68,000.00 - $118,000.00
$68k-118k yearly 6d ago
Boilermaker
Fluor Corporation 4.5
San Marcos, TX job
We Build Careers! Boilermaker San Marcos TX At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. Job Description Follow all health, safely, and environmental requirements ; Perform cleanup duties ; Perform material handling and storage duties ; Identify, use, and care of common hand and power tools ; Use and care of craft specific tools and equipment ; Knowledge and application of craft related mathematics ; Knowledge and use of safety standards and best safety practices relevant to rigging, Inspection of rigging equipment and hardware ; Knowledge and application of common hitches, Emergency stop signal, Basic crane hand signals, Knot tying (bowline & clove hitch), and use of rigging equipment relevant to craft specific tasks ; Performs basic procedures for using various slings in hitches and calculating sling stress. Utilize tools and equipment used for the lateral movement of loads without a crane. Knowledge of wire rope components and inspection requirements and procedures for wire rope, load blocks, and sheaves. ; Perform oxyfuel cutting operations ; Fabricate and install gaskets ; Identify and select pipe fittings ; Perform material cutting operations ; Perform bolt make-up ; Perform weld preparation and set-up ; Perform Layout and fabrication duties ; Structural and Tube fit-up and alignment ; Perform base metal preparation ; Perform preheat and post-weld heat treatment operations ; Perform vessel inspection ; Install valves and components ; Identify, fabricate and install pipe hangers and supports ; Fabricate and install stairs, railings, grating, and decking ; Review construction drawings and blueprints for specifications to determine work requirements ; Cut and thread pipe manually ; Read and interprit welding detail drawings ; Perform boiler tube fabrication, preparation, and fitting ; Perform air carbon arc cutting and gouging Job Requirements Mental Demands: Understand and carry out oral instructions ; Read and carry out written instructions to perform work tasks ; Work at varying heights ; Recognize, avoid, and report safety hazards ; Assemble and disassemble objects ; Operate equipment and power tools Physical Demands: See hazards, safety warnings, and barriers ; Bend knees for lifting and routine work tasks ; Stoop for work positioning and lifting to perform work tasks ; Lift maximum 50 lbs without assistance ; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings ; Climb/balance on ladders, scaffolding, and structures for work tasks ; Kneel for work positioning and work task performance ; Reach above shoulders and away from body to perform work tasks ; Demonstrate manual dexterity to perform work tasks Working Conditions: Work in extreme heat or cold ; Work where noise level is above 85 decibels ; Work in wet/humid environment ; Work in cramped quarters ; Work in environment of fluctuating ventilation ; Work inside and outside We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary: Job Req. ID: 1781 Nearest Major Market: Austin
$73k-104k yearly est. 21d ago
Specialist - IT Terminal Automation
Energy Transfer 4.7
Energy Transfer job in San Antonio, TX
Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Position Summary Position will be responsible for implementing projects and providing daily support of terminal management systems for automated loading and off-loading terminals. Primary duty will be configuration and support of terminal automation software and related equipment, including terminal management system configuration and troubleshooting, software installation, and general technical system support. Will provide support of critical production systems, 7x24, to ensure continuous system availability. Activities include direct end user contact with terminal operations, corporate personnel, and vendors. Major Accountabilities * Configure, implement and maintain terminal automation systems including related applications, hardware, interfaces, and communications. * Collect, interpret and document requirements to develop new or modify existing solutions. * Develop and implement automation system changes and enhancements. * Provide support of critical production automation systems, 7 days-a-week, 24 hours a day, to ensure continuous availability. * Perform research and maintenance activity, including vendor coordination to ensure that expected service levels and objectives are met. * Maintain broad understanding of information technology and business processes in order to assess impact and prioritize activities. * Responsible for solving difficult to complex technical issues. * Expected to continually expand scope of knowledge. * Expected to work effectively with other I/S disciplines and operations team members, and bridge gaps as necessary. * Travel - Must be willing and able to travel as required by the demands of the position, up to 20% of the time, but may be higher during critical project assignments. * Work assignments at remote sites will require outside work in all types of weather conditions. * Must be willing to work overtime when needed, including occasional weekend work Education Requirement * Bachelor's degree in Engineering, Computer Science, Information Technology, or related field preferred; extensive work experience with terminal automation systems may be considered in lieu of degree. Experience Requirement * 2-5+ years of relevant technical experience, including terminal automation systems configuration and support * Effective analytical and complex problem-solving skills. * Ability to prioritize and handle multiple tasks and projects concurrently, managing time and schedule to meet appropriate deadlines. * Strong interpersonal skills for communication with a diversified user community and outside vendors. * Ability to identify an issue, analyze and research problems, and formulate a solution * Ability to identify, isolate, and repair equipment and software affecting service for all supported locations. * Available for 24 x 7 support as needed * Ability to take direction from supervisor and work in a team environment. Preferred Qualifications: Experience in several of these areas preferred: * Terminal systems pre-set and metering technologies * Ability to read and understand P&ID drawings * Field instrumentation and electrical systems * Basic knowledge of petroleum operations and industry terminology * Working knowledge of networks and Microsoft Windows * Relational Databases, such as SQL or Oracle and PL/SQL * Linux, Unix, or QNX * MS Office Products CANDIDATES WITH GREATER QUALIFICATIONS MAY BE CONSIDERED FOR A HIGHER LEVEL POSITION
$60k-83k yearly est. 59d ago
HC - Operator - Crane - Hyd
Fluor Corporation 4.5
San Antonio, TX job
We Build Careers! HC - Operator - Crane - Hyd San Antonio TX At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. Job Description Follow all health, safely, and environmental requirements; Perform cleanup duties; Perform material handling and storage duties; Identify, use, and care of common hand and power tools; Use and care of craft specific tools and equipment; Knowledge and application of craft related mathematics; Knowledge and use of safety standards and best safety practices relevant to rigging, Inspection of rigging equipment and hardware; Knowledge and application of common hitches, Emergency stop signal, Basic crane hand signals, Knot tying (bowline & clove hitch), and use of rigging equipment relevant to craft specific tasks; Identify equipment types; Perform equipment inspection, service and maintenance as required; Read and use equipment operator's manual; Assist with scheduled service and maintenance; Perform equipment assembly and disassembly; Assist with critical lift design as required; Calculate capacities from load/capacity chart; Inspect rigging configuration for safe lifting operations; Selection of equipment for safe lifting operations; Perform critical lifts as required; Identify components and controls of equipment; Ability to respond to equipment emergency procedures; Requires valid certification to operate crane(s) and proven, verifiable experieince as a crane operator. NCCCO certification(s) preferred and may be required.; Observes load hook up and determines safety of load.; Manipulates crane controls to reguulate speed and direction of crane and hoise movement according to written, verbal, or signal instructions.; Cleans and maintains crane and hoisting mechanism(s).; Inspects crane for defective parts and notifies supervision of defects/malfunction.; Loads, transports, and unloads materials, tools, equipment and supplies. May assist in lifting, positioning, and securing materials and work pieces during installation.; Performs minor maintenance or cleaning activities of tools and equipment.; Safely operates crane and hoist mechanism(s); plans and coordinates crane movement and set up.; Four (4) years minimum industrial construction crane operation experience preferred. Heavy Civil highway construction experience preferred. All other duties as assigned. Job Requirements Mental Demands: Understand and carry out oral instructions; Read and carry out written instructions to perform work tasks; Work at varying heights; Recognize, avoid, and report safety hazards; Assemble and disassemble objects; Operate equipment and power tools Physical Demands: See hazards, safety warnings, and barriers; Bend knees for lifting and routine work tasks; Stoop for work positioning and lifting to perform work tasks; Lift maximum 50 lbs without assistance; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings; Climb/balance on ladders, scaffolding, and structures for work tasks; Kneel for work positioning and work task performance; Reach above shoulders and away from body to perform work tasks; Demonstrate manual dexterity to perform work tasks Working Conditions: Work in extreme heat or cold; Work where noise level is above 85 decibels; Work in wet/humid environment; Work in cramped quarters; Work in environment of fluctuating ventilation; Work inside and outside We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary: Job Req. ID: 1697 Nearest Major Market: San Antonio
$47k-70k yearly est. 12d ago
Infrastructure Quality Technician
Fluor Corporation 4.5
San Antonio, TX job
We Build Careers! Infrastructure Quality Technician San Antonio TX At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. Job Description The purpose of this position is to work on general activities associated with supplier quality surveillance such as tracking Quality metrics and providing consistent reporting. This role assists and supports the Quality specialists and engineers as requested. * Maintain supplier quality surveillance (SQS) logs and input to databases (such as MatMan, SAP, Invoice commitment, etc.) * Perform support of basic SQS activities * Stay current/updated with technical and functional developments in area of specialty through continuing education, conferences, and periodicals, for example, and continue to develop in-depth specialization, if desired * Participate in Fluor University for training and career development * Maintain compliance with all applicable policies, procedures, and global standards * Plan, organize, and carry out assignments as directed * Other duties as assigned Basic Job Requirements * A combination of education and directly related experience equal to two (2) years; some locations may have additional or different qualifications in order to comply with local requirements * Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors * Job related technical knowledge necessary to complete the job * Ability to attend to detail and work in a time-conscious and time-effective manner Other Job Requirements Preferred Qualifications * Accredited four (4) year degree or global equivalent in engineering/technical field of study preferred * One (1) year of related quality assurance/project experience * Basic to intermediate computer and software skills to include the use of word processing and email as well as the basic use of spreadsheets and electronic presentations * Oral and written communication and computer skills * Basic interpersonal skills * Basic leadership and decision-making skills We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Benefits Statement: Fluor is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental and vision plans, EAP, disability coverage, life insurance, AD&D, voluntary benefit plans, 401(k) with a company match, paid time off (personal, bereavement, sick, holidays) for salaried employees, paid sick leave per state requirement for craft employees, parental leave, and training and development courses. Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Notice to Candidates: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references, passport verifications and Global Watchlist screening. To be Considered Candidates: Must be authorized to work in the country where the position is located. Salary Range: $45,000.00 - $82,000.00 Job Req. ID: 2819 Nearest Major Market: San Antonio
$45k-82k yearly 40d ago
I35 NEX HC - Carpenter - Form/Structures
Fluor Corporation 4.5
San Antonio, TX job
We Build Careers! I35 NEX HC - Carpenter - Form/Structures San Antonio TX At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. Job Description Follow all health, safely, and environmental requirements; Perform cleanup duties; Perform material handling and storage duties; Identify, use, and care of common hand and power tools; Use and care of craft specific tools and equipment; Knowledge and application of craft related mathematics; Knowledge and use of safety standards and best safety practices relevant to rigging, Inspection of rigging equipment and hardware; Knowledge and application of common hitches, Emergency stop signal, Basic crane hand signals, Knot tying (bowline & clove hitch), and use of rigging equipment relevant to craft specific tasks; Read and interpret drawings and construction plans.; Measure, cut, assemble wood and metal forms for concrete pours using pencil, chalk, marking gage; prepares layout using rule, framing square, calipers. Constructs forms and chutes for pouring concrete.; Ensure forms are properly aligned and secured.; Pour and finish concrete within forms.; Dismantle forms after concrete has set following appropriate cure time and release by quality control or applicable DOT. Job Requirements Mental Demands: Understand and carry out oral instructions; Read and carry out written instructions to perform work tasks; Work at varying heights; Recognize, avoid, and report safety hazards; Assemble and disassemble objects; Operate equipment and power tools Physical Demands: See hazards, safety warnings, and barriers; Bend knees for lifting and routine work tasks; Stoop for work positioning and lifting to perform work tasks; Lift maximum 50 lbs without assistance; Ability to comprehend, and respond to audible/visual instructions, alarms and warnings; Climb/balance on ladders, scaffolding, and structures for work tasks; Kneel for work positioning and work task performance; Reach above shoulders and away from body to perform work tasks; Demonstrate manual dexterity to perform work tasks Working Conditions: Work in extreme heat or cold; Work where noise level is above 85 decibels; Work in wet/humid environment; Work in cramped quarters; Work in environment of fluctuating ventilation; Work inside and outside We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Salary is based upon experience. Base Salary: Job Req. ID: 1654 Nearest Major Market: San Antonio
$40k-53k yearly est. 54d ago
Infrastructure Construction Engineer
Fluor Corporation 4.5
San Antonio, TX job
We Build Careers! Infrastructure Construction Engineer San Antonio TX At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. Job Description Support the construction efforts by providing technical support to craft and supervision as well as helping to satisfy quality requirements on the project. Initiate action when necessary to ensure the project is being built as specified in the scope of work. * Evaluate, select, and apply standard construction engineering techniques, procedures, and criteria, using solid engineering judgment in making decisions * Supervise or coordinate the work of engineers, technicians, and other personnel who provide assistance on specific assignments * Assist craftsmen, foremen, and project supervision with regard to construction-related issues identified on drawings * Coordinate the completion of construction activities in assigned systems and prepares punch lists to ensure the readiness of systems for release for turnover to the client or for start up * Other duties as assigned Basic Job Requirements * Accredited four (4) year degree or global equivalent in engineering field of study and six (6) years of work-related experience; a recognized certification or registration in the applicable field, if required; some locations may have additional or different qualifications in order to comply with local requirements * Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors * Job related technical knowledge necessary to complete the job * Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines * Ability to attend to detail and work in a time-conscious and time-effective manner Other Job Requirements Preferred Qualifications * Construction Management degree or global equivalent * Typically has four (4) years of project experience * Ability to speak/read multiple languages * Excellent oral and written communication skills * Basic or intermediate computer and software skills to include the use of word processing and email as well as the basic or intermediate use of spreadsheets We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Benefits Statement: Fluor is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental and vision plans, EAP, disability coverage, life insurance, AD&D, voluntary benefit plans, 401(k) with a company match, paid time off (personal, bereavement, sick, holidays) for salaried employees, paid sick leave per state requirement for craft employees, parental leave, and training and development courses. Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Notice to Candidates: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references, passport verifications and Global Watchlist screening. To be Considered Candidates: Must be authorized to work in the country where the position is located. Salary Range: $68,000.00 - $118,000.00 Job Req. ID: 3302 Nearest Major Market: San Antonio
$68k-118k yearly 6d ago
Construction Engineer II
Fluor Corporation 4.5
San Antonio, TX job
We Build Careers! Construction Engineer II San Antonio TX At Fluor, we are proud to design and build projects and careers. We are committed to fostering a welcoming and collaborative work environment that encourages big-picture thinking, brings out the best in our employees, and helps us develop innovative solutions that contribute to building a better world together. If this sounds like a culture you would like to work in, you're invited to apply for this role. Job Description This position provides technical support to craft and supervision on the project. Also supports Quality by providing Quality oversight in their daily activities, as required. * Perform construction engineering work requiring application of standard construction engineering techniques, procedures, and criteria in performing a sequence of related construction engineering tasks * Assist craftsmen and foreman with regard to construction-related issues identified on drawings * Perform surveillance/examinations, if required, to ensure that the Quality objectives are being met for the project * Analyze and make independent recommendations regarding solutions to problems with varying complexity in accordance with organization and/or project objectives and guidelines * Other duties as assigned Basic Job Requirements * Accredited four (4) year degree or global equivalent in engineering field of study and two (2) years of work-related experience; a recognized certification or registration in the applicable field, if required; some locations may have additional or different qualifications in order to comply with local requirements * Ability to communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors, and visitors * Job related technical knowledge necessary to complete the job * Ability to learn and apply knowledge of applicable local, state/province, and federal/national statutes and guidelines * Ability to attend to detail and work in a time-conscious and time-effective manner Other Job Requirements * Participate in Fluor University Preferred Qualifications * Construction Management degree or global equivalent * Typically has three (3) years of project experience * Ability to speak/read multiple languages * Basic computer and software skills to include the use of word processing and email as well as the basic use of spreadsheets We are an equal opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by governing law. Benefits Statement: Fluor is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental and vision plans, EAP, disability coverage, life insurance, AD&D, voluntary benefit plans, 401(k) with a company match, paid time off (personal, bereavement, sick, holidays) for salaried employees, paid sick leave per state requirement for craft employees, parental leave, and training and development courses. Market Rate Statement: The market rate for the role is typically at the mid-point of the salary range; however, variations in final salary are determined by additional factors such as the candidate's qualifications, relevant years of experience, geographic location, internal pay equity, and prevailing market conditions for the specific role. Notice to Candidates: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references, passport verifications and Global Watchlist screening. To be Considered Candidates: Must be authorized to work in the country where the position is located. Salary Range: $61,500.00 - $104,500.00 Job Req. ID: 2726 Nearest Major Market: San Antonio
$61.5k-104.5k yearly 47d ago

Energy Transfer jobs in San Antonio, TX

Terminal Operator

Field Service Technician

Terminal Controller Trainee

Lead Designer I&E

Supervisor - Construction

Intern - GIS

Electrical Reliability Engineer/Sr Electrical Reliability Engineer

Specialist - IT Terminal Automation

HC - Operator - Crane - Hyd <80T

Infrastructure Quality Technician

I35 NEX HC - Carpenter - Form/Structures

I35 NEX HC - Trk Driver - Concrete

Infrastructure Construction Engineer

Boilermaker

Specialist - IT Terminal Automation

HC - Operator - Crane - Hyd

Infrastructure Quality Technician

I35 NEX HC - Carpenter - Form/Structures

Infrastructure Construction Engineer

Construction Engineer II

Learn more about Energy Transfer jobs

Most common locations at Energy Transfer

San Antonio, TX jobs at related companies

Working at related companies

Related companies jobs

Jobs in nearby cities