Engineer jobs in Canton, OH - 648 jobs

Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Click on "Learn more about this agency" button below for IMPORTANT additional information. This is a Direct Hire Solicitation. This public notice is to gather applications that may or may not result in a referral or selection. Overview Help Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $76,463 to - $164,301 per year Pay scale & grade GS 12 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Maxwell AFB, AL Show morefewer locations (79) Little Rock AFB, AR Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Grand Forks, ND Minot AFB, ND Offutt AFB, NE New Boston, NH McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Charleston, SC Shaw AFB, SC Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA McChord AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0854 Computer Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPCDHA-12857039-0854-CYBER Control number 852985200 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Provide computer system management support. * Help coordinate the planning and implementation of hardware and software upgrades, follow and enforce proper security procedures, oversee user accounts and ensure smooth and predictable data flow. * Test and determine the performance and applicability of data processing equipment and techniques and prepare written reports on these findings. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. Qualifications In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Group Coverage Qualification Standard for Professional and Scientific Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Professional Engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional Registration: Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. OR 2. Written Test: Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. OR 3. Specified Academic Courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum. OR 4. Related Curriculum: Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-12: One year of specialized experience equivalent to the GS-11. Examples of specialized experience include management and directing of assigned IT systems and programs for complex programs and/or projects. GS-13: One year of specialized experience equivalent to the GS-12. Examples of specialized experience include identifying, preparing and presenting detailed technical reports and briefings on new concepts and technical directions impacting programs/projects, and defining future technology requirements. GS-14: One year of specialized experience equivalent to the GS-13. Examples of specialized experience include planning, organizing, and managing branch level activities and developing goals and objectives that integrate organization and objectives for computer engineering programs. GS-15: One year of specialized experience equivalent to the GS-14. Examples of specialized experience include providing technical leadership, advice, and assistance on complex, controversial or precedent setting matters and dealing tactfully and effectively with high level officials, engineers and scientists. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): * Knowledge of computer engineering policies, theories, principles and concepts, and familiarity with other engineering disciplines. * Knowledge of automated data processing concepts, systems capabilities, and measurements processes to effectively accomplish assigned functions. * Ability to analyze, evaluate, and applies rules, regulations, and procedures in a variety of situations. * Ability to plan and organize work and coordinate with other engineering disciplines; communicate effectively, both orally and in writing; and maintain good working relations. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Applications are accepted until further notice. Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. **Meet the Team** Let's change the world together. Work closely with your team to gain experience and insights into real-world customer deployments and challenges. Be immersed in a small close-knit group of cohorts, to collaborate on a variety of projects that have a real impact. You'll learn from industry experts. Work on network infrastructures. Deliver business solutions and technology solutions from data, security, mobility and the cloud. **Your Impact** As a Consulting Engineer, you will gain hands-on experience and contribute to groundbreaking technology. You will be mentored by some of the industry's brightest minds who will help you challenge and develop your skills. You will collaborate with and learn from industry-leading engineers. At Cisco, we value your ideas and perspective. We encourage you to innovate and push boundaries. You will join a team to build your technical expertise, learn Cisco specific technologies and how to build a positive experience for our customers. You will make a proven impact on network infrastructure and solutions like security, mobility and cloud. Customer Experience covers full customer life-cycle experience. You give on customer engagements including planning, design and implementation of solutions. Ability to multi-task, self-start, work in a dynamic team environment and work independently. Awareness and general understanding of how consumer applications work over the internet (e.g., Browser, Voice/Video calls, Social Networks, Streaming etc.). Passionate about Computer Networking, Information Technology and Computer Science. **Minimum Qualifications** + Completion within the past 3 years, or current enrollment with expected completion within 12 months, of a certification or relevant degree program (e.g., Associates, Apprenticeship, Boot Camp, or Certification in a specialized program) + 1 year of relevant experience, High School Diploma + 2 years of relevant experience or Bachelors + 0 years of relevant experience. Relevant fields include:Computer Networking, Computer Science, Information Systems, Cyber Security, Computer Networking, Computer Science or Engineering + Basic computer networking fundamentals relating to IP addressing, routing, switching, TCP/IP and OSI model. + Proficient in Python, REST APIs, Automation. + Fluent in English with excellent verbal and written communication. **Preferred Qualifications** + Cisco Certifications (e.g., CCENT, CCNA, CCNP). **Why Cisco?** At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. **Message to applicants applying to work in the U.S. and/or Canada:** Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: + 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees + 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco + Non-exempt employees** receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees + Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) + 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next + Additional paid time away may be requested to deal with critical or emergency issues for family members + Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: + .75% of incentive target for each 1% of revenue attainment up to 50% of quota; + 1.5% of incentive target for each 1% of attainment between 50% and 75%; + 1% of incentive target for each 1% of attainment between 75% and 100%; and + Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $77,600.00 - $113,300.00 Non-Metro New York state & Washington state: $69,100.00 - $100,700.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. ** Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements. Cisco is an Affirmative Action and Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, genetic information, age, disability, veteran status, or any other legally protected basis. Cisco will consider for employment, on a case by case basis, qualified applicants with arrest and conviction records.

We are seeking a Continuous Improvement Engineer to provide technical expertise and support in capacity planning, production efficiency enhancement, quality improvement, and cost reduction. This role involves collaborating with production and internal teams to implement innovative manufacturing processes and improvements. The successful candidate will design, maintain, and optimize manufacturing processes within an ERP system, while also ensuring accurate data flow and process integration. Responsibilities * Collect, analyze, and interpret data to optimize production processes. * Collaborate with leaders and production teams to design manufacturing lines and flows in line with lean methodologies. * Evaluate existing processes, identify inefficiencies, and recommend improvements to reduce cycle time and minimize waste. * Troubleshoot and resolve production-related issues, including equipment malfunctions, quality concerns, and production delays. * Monitor key performance indicators (KPIs) such as defect rates, downtime, and material utilization. * Lead continuous improvement initiatives and projects to increase productivity and reduce costs. * Improve manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. * Establish and maintain documentation of manufacturing processes, procedures, and changes. * Provide manufacturing engineering support for all new and existing products. * Specify and design jigs, fixtures, and manufacturing tools. * Collaborate with cross-functional teams including production, quality, and engineering. Essential Skills * Bachelor's degree in mechanical or related field. * 3+ years of experience in manufacturing process engineering, including machining. * Prior experience in process improvements with strong knowledge of lean manufacturing principles and production processes. * Certification in Lean, Six Sigma, or other continuous improvement methodologies. * In-depth knowledge and understanding of manufacturing lines/flows with lean methodologies and processes. * ERP systems routers knowledge. Additional Skills & Qualifications * Experience with continuous improvement tools such as PFMEA, DFMEA, 8D, 5 Whys, fishbone, VSM, 6 Sigma and other lean tools. * Experience in plant layout and process optimization. * Experience in new product introduction. Work Environment The position operates within a manufacturing environment that is rapidly expanding. This is a dynamic and busy environment, currently in the early stages of adding onto the manufacturing facility and implementing lean methodologies, as well as launching a new ERP system. Job Type & Location This is a Contract to Hire position based out of Canton, OH. Pay and Benefits The pay range for this position is $46.00 - $53.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Canton,OH. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Salary Range: $79,545 - $116,804 (+10 - $20/hour in benefits) Employment at the City of Canton comes with a full array of benefits. We offer comprehensive health insurance, paid vacations, paid holidays, a retirement plan, and sick time. Applicants must apply at governmentjobs.com. Applicants MUST submit a copy of a valid driver's license or other photo ID along with their application and any other pertinent documentation. This is an open examination. To be eligible for this position, applicants must be a U. S. Citizen or have a permanent resident card. Applicants must be a High School graduate or possess a G.E.D. and be at least 18 years of age. GENERAL STATEMENT OF DUTIES: This is a responsible, professional, and managerial position. An employee in this classification performs professional work of an engineering nature in assisting in the operation of the City of Canton Water Reclamation Facility (WRF). The Facilities Engineer - Water Reclamation Facility reports directly to the WRF Superintendent. This position includes professional engineering work directly involving public health and safety through appropriate wastewater treatment techniques. It requires thorough familiarity and application of sound engineering and surveying principles and practices. The exercise of technical judgment on numerous important details and selection of sound engineering procedures should be followed at all times. The work is performed in accordance with established state laws, city codes, Recommended Standards for Wastewater Facilities (Ten-States Standards), and Environmental Protection Agency rules and regulations. The position will require thorough knowledge of the above stated standards and accepted practices as they apply to the work being conducted. The Engineer shall develop a good working relationship with Ohio EPA, and expect to be actively involved in the Ohio Water Environment Association and related professional organizations. There is an expectation that the individual will obtain an OEPA Class IV Wastewater Operator certificate when eligible. The individual has the primary responsibility for directing and participating in planning, design and construction of all facility projects. These projects may include, but are not limited to, those dealing with wastewater treatment operation, maintenance and all supporting functions necessary for the proper operation of the facility. The position involves assisting the WRF Superintendent in developing and monitoring the department budget, rate studies, and may include handling confidential materials. The individual should expect to be involved in all aspects of work under the authority of the WRF Superintendent. The Facilities Engineer will be the technical liaison between the department and outside entities in regards to engineering projects. This individual must also work cooperatively with other City service departments for the betterment of the whole. DESCRIPTION OF WORK: The Facilities Engineer is responsible for assisting the WRF Superintendent in developing, coordinating, evaluating, managing, and encouraging the implementation of various programs for the WRF. Responsible for assisting the WRF Superintendent in planning, design and construction of departmental projects including preparation of preliminary engineering reports, detailed construction plans, specifications, construction management, etc. Responsible for all aspects of creating, directing and managing various departmental projects such as: Plant process control and optimization; energy use optimization; asset management, preventative maintenance including a thorough knowledge of pumps, motors, valves, hydraulics, controls, and piping; budgeting; establishing and reviewing requests for professional engineering qualifications; staff training programs, engineering drawings, etc. Establishes criteria for design and construction of departmental projects. Coordinates projects with other city departments and public and private agencies. Schedules and supervises departmental construction projects. Reviews with others as necessary the project plans, construction specifications, materials testing requirements, safety standards, shop drawings, quantity measurements, change orders, etc. Reviews all necessary reports and projects to ensure that necessary procedures are performed to conform with appropriate rules, regulations and standards. Reviews construction plans and specifications prepared by consulting engineers and others. Ensures city, state, and federal requirements are complied with. Assists in the planning and monitoring of budgetary operations of the department. Prepares and maintains records and reports. Makes recommendations to the WRF Superintendent regarding the departmental budget. Prepares budgets and rates studies. Prepares loan and grant applications. Assists the WRF Superintendent in establishing departmental goals, objectives, long-range planning, project prioritization, capital improvement planning, etc. Keeps abreast of industry wide best business practices through trade magazines, journals, and involvement in various professional organizations including the Water Environment Association, and engineering societies. Represents WRF before City Council, City Administration, employee organizations, professional organizations, the press, and civic groups. May be required to give public presentations to these various groups and others concerning departmental interests. Attend and participate in meetings concerning departmental issues. Participates in training WRF employees. Overall, the Facilities Engineer - Water Reclamation Facility is expected to be knowledgeable, thoroughly involved in, and reasonably responsible for the proper functioning of all aspects of the WRF. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: (The duties listed below are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position.) Thorough knowledge of the principles and practices of engineering as related to the preparation of plans and specifications for a wide variety of public systems, methods, and techniques. Knowledge of construction materials and of approved standards of safety as related to designs and specifications. Ability to instruct subordinate personnel in proper work methods and standards to the design and construction of a variety of public works projects. Skill in the use of engineering and surveying instruments and equipment. Ability to prepare technical administrative reports. Ability to effectively utilize a variety of computer software including but not limited to Power Point, spreadsheets, graphing, drawing, modeling, AutoCADD, SCADA, and G.I.S. Ability to analyze problems, troubleshoot, and develop workable solutions. Ability to present ideas effectively, orally, and in writing. Ability to establish and maintain effective working relationships with elected officials, department heads, city employees, other agencies, and the general public. MINUMUM QUALIFICATIONS: Graduation from an accredited college or university with a Bachelor's degree in sanitary engineering, civil engineering, environmental engineering, mechanical engineering or a related field and extensive professional engineering experience; or an equivalent combination of education, experience and/or training which provide the required knowledge, skills, and abilities. Prior experience with wastewater collection and/or treatment facilities work is a plus. Possession of a wastewater operator certificate is a plus. Current registration as a Professional Engineer with the State of Ohio Board of registration for professional Engineers and Surveyors, and a minimum of one year at the advanced professional level in engineering work is required. The Facilities Engineer must maintain his/her Professional Engineer certification in good standing. SHOULD TEN OR FEWER QUALIFIED APPLICATIONS BE RECEIVED NAMES WILL BE PLACED ON AN ELIGIBILITY LIST IN ACCORDANCE WITH THEIR APPLICATION FILING DATE. SHOULD MORE THAN TEN QUALIFIED APPLICANTS REGISTER FOR THIS EXAMINATION, THOSE APPLICANTS WILL BE NOTIFIED OF THE FORMAT, LOCATION, DATE, AND TIME OF THE EXAMINATION. Repeating an Exam: Per OAC Rule 123: 1-9-01, an applicant who has competed in a civil service examination cannot repeat that examination or take and examination for the same classification within FOUR MONTHS from the date of original examination, unless an alternative form of examination is given, or unless other standards are specific in the examination announcement. * DISCLAIMER* All applicants should receive an email from noreply@governmentjobs.com confirming that their application was received. If you do not receive a confirmation email, please contact Civil Service at ******************* to confirm that your application went through. Once Civil Service processes applications, you will be emailed again within 5 business days. Should you not receive an email, please call our office at ************. RATING Your name will be placed on a list of eligible candidates upon receiving a passing score. Once the list has been established, your name will remain on the list for a period of one (1) year. IMPORTANT NOTICE TO VETERANS As provided in ORC 124.23C, any person who has completed service in the uniformed services, who have been honorably discharged from the uniformed services or transferred to the reserve with evidence of satisfactory service, and who is an Ohio resident and any member of a reserve component of the armed forces of the United States, including the Ohio National Guard, who has completed more than 180 days of active duty service pursuant to an executive order of the President of the United States or an act of Congress of the United States may file with the director a certificate of service or honorable discharge (DD-214 - Long version), and upon this filing, the person shall receive an additional credit of twenty percent (20%) of the person's total grade given in the examination in which the person receives a passing grade. A member in good standing of a reserve component of the armed forces of the United States, including the Ohio National Guard, who successfully completes the member's initial entry-level training shall receive a credit of fifteen percent (15%) of the person's total grade given in the examination in which the person receives a passing grade. NOTICE OF DRUG TESTING REQUIREMENT Pursuant to Civil Service Rules applicants are hereby advised that the position of employment being examined for is subject to a drug test. Accordingly, eligibility is not considered final until drug testing has been successfully completed with a negative result. NOTICE OF BACKGROUND INVESTIGATION Be advised that candidates may be subjected to a confidential background investigation, including, but not limited to, a criminal record check and driving record check. ADA COMPLIANCE Reasonable accommodation in accordance with ADA Compliance will be made available upon request to those qualified applicants in need of it, in order to achieve the essential job functions as described above. EQUAL EMPLOYMENT All qualified applicants will receive consideration for appointment without regard to race, religion, color, national origin, sex, political affiliation, age, type of disability, or any other non-merit factor. BY ORDER OF THE CANTON CIVIL SERVICE COMMISSION Rachel A. Forchione, Director Anna M. Moeglin, Assistant Director

This is an onsite role in Canton, Ohio. Relocation and employment sponsorship is not being offered. The Manufacturing Engineer - Continuous Improvement is responsible for analyzing, developing, and enhancing manufacturing processes to improve efficiency, quality, and safety. This role combines responsibilities typically found in both Manufacturing Engineering and Mechanical Engineering disciplines and is integral to driving and sustaining process improvement initiatives at Ohio Gratings. The Manufacturing Engineer will work closely with cross-functional teams including Production, Quality, Safety, and Maintenance to identify improvement opportunities, validate solutions through testing and analysis, and implement sustainable changes that align with Lean manufacturing principles. As a faith-based organization rooted in biblical principles, we strive to reflect these values in our work, relationships, and decision-making. We expect all associates to learn, embrace, and actively model our core values through their actions, choices, and collaboration with others. This commitment is essential to sustaining our culture and achieving shared success. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. Key Responsibilities: Evaluate current manufacturing methods and equipment to identify areas of improvement. Lead and support process improvement initiatives using Lean and Six Sigma methodologies. Research, propose and lead new capital equipment installation projects trough implementation. Create value stream maps. Evaluate and update plant layouts and material flow. Conduct time studies and evaluate work content to establish baseline data and validate improvements. Design tooling, fixtures, and workstations to support optimized processes. Participate in and lead problem solving efforts to identify root causes of process-related issues; implement corrective actions. Develop and maintain process documentation such as standard work, work instructions, and process flow diagrams. Plan and conduct test runs or pilot trials to assess potential changes and improvements. Track and report key performance indicators (KPIs) such as throughput, downtime, scrap rate, and efficiency. Support production teams by troubleshooting process issues and recommending solutions. Act as a technical resource for continuous improvement projects and initiatives across departments. Embrace 5S methodology All other duties as assigned by management. Required Skills & Competencies: Proficient in Solidworks and AutoCAD. Solid understanding of Lean Manufacturing, Six Sigma, and 5S principles. Capable of conducting and analyzing time studies and process capability tests. Strong problem-solving and analytical thinking skills. Able to manage a project from inception to completion. Effective communication skills; able to collaborate with various departments. Organized, self-directed, and capable of managing multiple priorities. Hands-on approach with a strong mechanical aptitude. Education & Experience: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related field. Minimum of 3 years of experience in a manufacturing environment with process improvement responsibilities. Experience working in a metal fabrication or industrial manufacturing environment is preferred. Six Sigma certification (Green Belt or higher) is a plus. EEO STATEMENT: Our company provides equal employment opportunities to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

This medium-sized site produces polymer additives and is rapidly expanding and investing in state-of-the-art controls. Responsibilities include production support, process optimization, design through installation of projects including controls, data analysis, and updating SOPs. This company has several engineers on site and other production sites in the US and overseas. They offer superior medical coverage as well as a 401k and a company bonus. Relocation assistance is tailored to the person's needs. Minimum Requirements: B.S. Chemical Engineering 3+ years out of chemicals, plastics, rubber, foods, pharma, paints/coatings, etc. Candidates ideally have at least some experience or exposure to PLCs, instrumentation, and project work.

Establishing processes and procedures used for the manufacturing of products. This position is required to identify and implement processes that improve the safety, quality, and operating efficiency in a manner that supports the objectives of the Business Unit. * Identify and implement process improvement initiatives focused on cost reduction, quality improvement, and business growth. * Ensure all manufacturing processes comply with the Powell Quality System. * Identify and implement product design improvements, working closely with Product engineers. * Provide technical support for manufacturing operations and product design. * Write work instructions and equipment preventive maintenance manuals. * Provide technical support and training to the Maintenance team. * Perform other related duties as assigned. Job Requirements * BS Degree in Manufacturing, Industrial, or Mechanical Engineering, or related area. * Minimum 2-5 years of experience in a Manufacturing Engineer role, preferably supporting fabrication equipment * Demonstrated proficiency with computer skills using Oracle, MS Office and MS Project. * Demonstrated success with specifying, implementing, and manufacturing equipment. * Ability to order material electronically. * Advanced knowledge using drafting/CAD skills with the ability to create and modify Factory Layouts. * Knowledge of ISO 9000 Quality System. * Experience with either the Toyota Production System or Lean Manufacturing. * Project Management experience, leading multi-disciplined teams. * Proven track record of completing process improvements from conception through final implementation and ramp-up. * Familiar with statistical test procedures and corrective action techniques. * Excellent mechanical and electrical systems aptitude. Understanding of pneumatic, hydraulic, and servo positioning systems, as well as, and machine controls. * Project involvement and organizational skills to handle multiple priorities. * Demonstrated written and verbal communication skills. * Demonstrated simple analytical and problem solving ability. * Ability to implementing designs and solutions. * Able to follow directed instruction. * Able to lead change and respond to tactical changes. * Able to prioritize and manage time effectively. (self-motivated and self-managing). * Demonstrated mechanical aptitude. * Attend in house and outside training sessions. * Learn policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products. This position does not support relocation or sponsorship.

This is an onsite role in Canton, Ohio. Relocation and employment sponsorship is not being offered. The Manufacturing Engineer - Continuous Improvement is responsible for analyzing, developing, and enhancing manufacturing processes to improve efficiency, quality, and safety. This role combines responsibilities typically found in both Manufacturing Engineering and Mechanical Engineering disciplines and is integral to driving and sustaining process improvement initiatives at Ohio Gratings. The Manufacturing Engineer will work closely with cross-functional teams including Production, Quality, Safety, and Maintenance to identify improvement opportunities, validate solutions through testing and analysis, and implement sustainable changes that align with Lean manufacturing principles. As a faith-based organization rooted in biblical principles, we strive to reflect these values in our work, relationships, and decision-making. We expect all associates to learn, embrace, and actively model our core values through their actions, choices, and collaboration with others. This commitment is essential to sustaining our culture and achieving shared success. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. Key Responsibilities: Evaluate current manufacturing methods and equipment to identify areas of improvement. Lead and support process improvement initiatives using Lean and Six Sigma methodologies. Research, propose and lead new capital equipment installation projects trough implementation. Create value stream maps. Evaluate and update plant layouts and material flow. Conduct time studies and evaluate work content to establish baseline data and validate improvements. Design tooling, fixtures, and workstations to support optimized processes. Participate in and lead problem solving efforts to identify root causes of process-related issues; implement corrective actions. Develop and maintain process documentation such as standard work, work instructions, and process flow diagrams. Plan and conduct test runs or pilot trials to assess potential changes and improvements. Track and report key performance indicators (KPIs) such as throughput, downtime, scrap rate, and efficiency. Support production teams by troubleshooting process issues and recommending solutions. Act as a technical resource for continuous improvement projects and initiatives across departments. Embrace 5S methodology All other duties as assigned by management. Required Skills & Competencies: Proficient in Solidworks and AutoCAD. Solid understanding of Lean Manufacturing, Six Sigma, and 5S principles. Capable of conducting and analyzing time studies and process capability tests. Strong problem-solving and analytical thinking skills. Able to manage a project from inception to completion. Effective communication skills; able to collaborate with various departments. Organized, self-directed, and capable of managing multiple priorities. Hands-on approach with a strong mechanical aptitude. Education & Experience: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related field. Minimum of 3 years of experience in a manufacturing environment with process improvement responsibilities. Experience working in a metal fabrication or industrial manufacturing environment is preferred. Six Sigma certification (Green Belt or higher) is a plus. EEO STATEMENT: Our company provides equal employment opportunities to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

Our client are seeking a skilled Manufacturing Engineer to join their team. The Manufacturing Engineer will be responsible for designing, implementing, and improving manufacturing processes, ensuring efficiency and quality across the production line. This role requires strong technical expertise and the ability to collaborate with cross-functional teams to drive innovation and continuous improvement within the manufacturing process. Job Description: Foster collaboration with product engineering teams, ensuring the manufacturability of assembly and test specifications Provide assistance in resolving issues related to the interpretation of drawings, product design, manufacturing methods, and product performance. Collaborate with new product and process development teams to establish new bills of resources, develop routings, determine labor and machinery production cycle times, and contribute input data for product cost calculations. Develop end of line test processes and program PLCs using LabView software Hands on work and design of test apparatuses including flow meters, pressure transducers, electrical components etc. Take a lead role in developing a business case for capital investment in production processes and associated equipment, aiming to enhance overall operational efficiency. Participate in root cause analysis using 8D, lean 6 sigma, 5 why analysis, etc. Assist incoming inspection in the disposition of rejected materials. Qualifications: Bachelor's degree in Manufacturing Engineering, Industrial Technology, Electrical Engineering, Controls Engineering or related field preferred OR five to seven years in a technical position related to a precision manufacturing environment in lieu of BS degree Proficiency with Microsoft Office and AutoCAD Proven experience in manufacturing technology, or a related field. Excellent written communication ability. Experience with Lean Manufacturing principles. Strong analytical and problem-solving skills.

Skill: ATM Application Support Must Have Technical/Functional Skills * A minimum of 8 years of experience is required with a solid understanding of ATM hardware, software, and its architectural design. * Production support experience in application support (L2/L3). * The associate must be capable of identifying the root causes of ATM issues and conducting first-level troubleshooting. * The associate must understand basic security protocols and procedures. * The associate must have a basic knowledge of ATM application servers, database management systems, and third-party software, including their licensing processes. * The associate must be familiarized with ATM software deployment procedures, whether through RLM or manual processes. * The associate is expected to engage with clients and vendor partners on a daily basis, ensuring that all business-as-usual (BAU) processes operate smoothly. * The associate must have the ability to conduct pre-production functional and regression validation on different ATM models, as well as to effectively communicate the pre-production validation outcomes to all stakeholders and LOB. * Monitoring the ATM software compliance/third party software audit and informing all the stakeholders and LOB for any issues/findings. * Prioritize the tasks accordingly and complete it within expected deadlines. * Regular monitoring of incident queues is necessary to ensure that all incident management (IM) and Service-Now requests are addressed within the specified service level agreements (SLAs): * Follow the change management process for any new changes and perform the validations/System checks post-production deployment. * Collaboration with multiple teams is required to resolve any issues or concerns related to ATM application issues. * Timely addressing of all vulnerabilities. variances. and findings related to the supported Application is essential. Roles & Responsibilities: * The associate is expected to engage with clients and vendor partners on a daily basis, ensuring that all business-as-usual (BAU) processes operate smoothly. * The associate must have the ability to conduct pre-production functional and regression validation on different ATM models, as well as to effectively communicate the pre-production validation outcomes to all stakeholders and LOB. * Monitoring the ATM software compliance/third party software audit and informing all the stakeholders and LOB for any issues/findings. * Prioritize the tasks accordingly and complete it within expected deadlines. * Regular monitoring of incident queues is necessary to ensure that all incident management (IM) and Service-Now requests are addressed within the specified service level agreements (SLAs): * Follow the change management process for any new changes and perform the validations/System checks post-production deployment. * Collaboration with multiple teams is required to resolve any issues or concerns related to ATM application issues. * Timely addressing of all vulnerabilities. variances. and findings related to the supported Application is essential. Salary Range - $100,000-$120,000 a year TCS Employee Benefits Summary: * Discretionary Annual Incentive. * Comprehensive Medical Coverage: Medical & Health, Dental & Vision, Disability Planning & Insurance, Pet Insurance Plans. * Family Support: Maternal & Parental Leaves. * Insura nce Options: Auto & Home Insurance, Identity Theft Protection. * Convenience & Professional Growth: Commuter Benefits & Certification & Training Reimbursement. * Time Off: Vacation, Time Off, Sick Leave & Holidays. * Legal & Financial Assistance: Legal Assistance, 401K Plan, Performance Bonus, College Fund, Student Loan Refinancing.

The Systems Engineer is responsible for supporting equipment in a Microsoft Windows Environment, from design through implementation and support. This position is responsible for the design of the virtual environment including server, virtual desktop, and physical server environments to maintain a high level of performance and reliability. The Systems Engineer performs a wide variety of installation, configuration and upgrading of workstations and servers, and related hardware and software in a LAN, WAN and stand-alone environment. They provide investigation, diagnostics testing and repair/resolution of all systems to insure reliability, performance and security of those systems. The Systems Engineer manages disaster recovery functions for the networks and plans, designs, and tests procedures and mechanisms to prevent various types of network failures. This position is required to recommend changes to security policies and procedures, and recommends changes to the IT infrastructure. The Systems Engineer is responsible for supporting equipment in a Microsoft Windows Environment, from design through implementation and support. This position is responsible for the design of the virtual environment including server, virtual desktop, and physical server environments to maintain a high level of performance and reliability. The Systems Engineer performs a wide variety of installation, configuration and upgrading of workstations and servers, and related hardware and software in a LAN, WAN and stand-alone environment. They provide investigation, diagnostics testing and repair/resolution of all systems to insure reliability, performance and security of those systems. The Systems Engineer manages disaster recovery functions for the networks and plans, designs, and tests procedures and mechanisms to prevent various types of network failures. This position is required to recommend changes to security policies and procedures, and recommends changes to the IT infrastructure.

Working at Freudenberg: We will wow your world! Responsibilities: Support Management to Develop and implement sales strategies to achieve revenue goals. Work together with Sales and Marketing teams to Identify and pursue new business opportunities within the decorative plating and surface treatment market. Offer technical support and guidance to customers, helping them understand the benefits and applications of our products. Support Management to Conduct market research to stay informed about industry trends and competitor activities. Prepare and deliver engaging sales presentations and proposals. Maintain accurate records of sales activities and customer interactions in CRM systems. Qualifications: Proven 3 - 5 years of experience in in technical sales or Field Services Engineering in the Decorative Electroplating Industry. Bachelor's degree in Engineering, Chemistry, Materials Science, or a related field is a plus for the candidate. Strong understanding of plating and coating technologies and their applications. Excellent communication, negotiation, and presentation skills. Ability to work independently and collaboratively. Proficiency in Microsoft Office Suite, knowledge in CRM Software is a plus. Willingness to travel as needed. The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. SurTec Inc.

This Project Engineer is responsible for assisting the project team in the planning and execution of successful construction projects. This opportunity is within our Geotechnical team. Primary Responsibilities Develops solid working relationships with all project personnel Assists in the preparation of work orders, schedules, drawings, field measurements, subcontracts, and supplier agreements Attends pre-construction meetings; assists with the preparation of action items lists and proposed solutions Provides support to the Project Manager, Superintendent, and Contract Administrator with preparation of job documents and materials Analyzes, processes, and assists with the project layout, construction sequencing, cost analysis, measurement of quantities, and clarification of specifications as necessary Ensures that proper document control, quality assurance documentation, and construction project records are kept in accordance with expectations Assists in monitoring the project site to ensure that the work is progressing on schedule Provides support to field personnel Responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company Knowledge & Skills Able to read and comprehend contract documents and construction plans Solid general math skills with the ability to complete field calculations Proficient in MS Office and construction software Excellent oral and written communication Accuracy and attention to detail Able to deal effectively and tactfully with customers and employees at all levels Able to act in a safe manner always High level of motivation, a ‘self-starter' Education Bachelor's Degree in Construction Management, Civil Engineering, or related field; equivalent field experience will be considered. 2 years of construction experience with heavy/civil preferred. Travel Requirements Ability and willingness to travel overnight and for extended periods of time as required by project needs. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand; walk; and stoop, kneel. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Equal Opportunity The Beaver Companies provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Posting Title Manufacturing Engineer #TeamAAM is searching for a Manufacturing Engineer to join our team. This position will be based out of our Minerva location in Minerva, OH. As a Manufacturing Engineer you will manage the implementation of new processes, selection of equipment to be purchased, and time estimates. Also, you will establish control charting of critical features and processes; monitors results and determines machine and process capabilities and performance reliability. You will resolve issues with design, manufacturability, or build sequences; ensure production-part acceptance and manufacturing readiness; consult on and oversees selection and implementation of automation and robotics on the assembly line. Job Description: Develop manufacturing equipment purchase proposals by studying manufacturing plans and commitments; evaluating manufacturing processes and requirements. Recommend new manufacturing equipment by identifying vendors and operating equipment, evaluating equipment capabilities and service history; evaluating vendor service and support. Complete equipment cost projections by analyzing investment, return, and savings. Monitor equipment installations by advising crews. Meet production requirements by designing equipment modifications as needed Prepare equipment operators by conducting training; providing reference and support resources. Maintain process integrity by developing and updating policies, procedures, methods, and guidelines. Maintain equipment records by filing documents; updating equipment database. Protect organization value by keeping information confidential; cautioning others regarding potential breaches. All other duties as assigned. Required Skills and Education Bachelor's Degree or equivalent in experience. 2+ years experience in a manufacturing engineering position. About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Discover how we're Bringing the Future Faster at AAM.com. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

This position will be part of a technical team responsible for engineering work that includes continuous improvement, investigating and troubleshooting equipment/manufacturing/facility problems, analyzing production results, implementing and improving manufacturing methods and processes, and ensuring high yield and productivity in a highly automated manufacturing environment. His/her functions will also include interaction with internal and external customers and external vendors to solve urgent and complex problems by identifying and evaluating alternatives to provide support of all in-plant production as required. Position requires some on-call support. Job Responsibilities: An equipment tech. engineer ensures continuous process improvement and maintain machines through teamwork and clear communication. Co-work with production and process engineers and relative teams for success in the teams goals and for future opportunities. Design, control, and provide modification and improvement of the equipment Trouble shooting and solving problems on the chronic errors/trouble Find root cause analysis and reporting of major errors Monitor and ensure running machines continuously to reduce breakdown time Co-creation of documentation of the all the machines - creating and updating trouble shooting, work instructions, identifying problems, providing information about the course of the machine operation/maintenance during a shift and implementing preventive solutions Support for production and maintenance in solving technical problems Ensure compliance to safety and environmental regulations Direct and coordinate the activities of employees engaged in the production or processing of goods, maintenance and inspection personnel Read and analyze charts, work orders, production schedules, and other records and reports to determine production requirements and to evaluate current production estimates and outputs Practical knowledge and willingness to further develop in the area of mechanics / electrics / pneumatics and controls Implements strategies to improve equipment uptime and availability Additional duties as assigned Qualifications and Competencies: Bachelor's Degree required, Engineering or Engineering Technology preferred 1-3 Years Industrial Maintenance Engineering preferred Bi-Lingual English/Korean preferred Driven by objectives/KPIs; consistent; and high personal ownership to upholding accountability to established standards and practices Ability to use Logical thinking and decision making by focusing on identifying root cause objectively using data, analyzing production results, and following proven problem-solving methods Knowledge of Mechanical/technical curiosity and mindset Commitment and desire to learn our complex battery manufacturing processes with the goal of becoming a go-to resource for technical problem-solving discussions Effective communication and presentation skills MS Office tool-based report writing and oral communication skills Ability to work well with individuals and teams across the company to achieve team goals and targets Good computer, Troubleshooting, Problem-solving, Critical thinking skills Ability to work well in a team environment a requirement Total Rewards Information: We offer market-competitive compensation including base pay and incentive compensation opportunities based on the achievement of Company goals. We offer employees paid time off to refresh and recharge. Our total rewards program is designed to enrich your life at work and includes the following benefits: Blue Cross Blue Shield Health Care 100% Employer paid medical, dental and vision Up to 20 paid holidays a year but no less than 17 paid holidays Tuition Assistance for continuing education Vehicle Discount Program on General Motors branded vehicles Communication Stipend for Personal Cell Phone Comfortable air-conditioned work environment

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. Group: Road Position: Project Engineer Location: Akron, OH We are looking for a talented engineer who is looking for the opportunity to work on exciting projects in our Akron design center. In this role you will be a part of a growing team and contribute to transportation designs and mentoring of less seasoned staff members as we add to this team. Our ideal candidate is self-motivated with a strong technical background. Effective verbal and written communication skills are essential for client interaction and career advancement. Responsibilities Conceptual, preliminary, and detailed design for transportation projects Geometric, maintenance of traffic, drainage, and signing/pavement marking design as necessary Development and mentoring of junior staff Interaction with clients on technical related issues Development and Quality Control of construction plans, quantities, and specifications Development of 3D roadway models Other duties as assigned Qualifications Bachelor's degree in Civil Engineering Registered Professional Engineer in the state of Ohio (or ability to obtain within 6-12 months) Minimum of 4 years of experience as a roadway engineer Ability to work well and self-motivate in a collaborative team environment Strong team player with effective internal & external communication skills Other duties as assigned

What Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the world- improving the efficiency of today's industrial equipment and preparing for the future of motion on our planet and beyond. New employees can start contributing right away, and there are many opportunities to advance your career at your own pace. Join our global team of 19,000 people in 45 countries, and start helping our customers push the limits of what's possible in their world of motion. Description: Primarily responsible for providing expert knowledge and leadership in the development, application, and deployment of advanced materials and material processing technologies, utilizing an understanding of materials thermodynamics, materials thermal processing fundamentals, and ferrous metallurgy. Specific duties include: Conceives, plans, and executes projects working either alone or in collaboration with others to address the needs of the business units or corporate centers. Takes a lead role in collaborative effort to solve complex problems while requiring novel approaches that leverage and/or further advanced engineering research in metallurgy and materials science. (40%); Interacts proactively with product development, sales, marketing, and manufacturing. Leads activities with outside vendors and suppliers to accomplish project goals. (30%); Provides guidance and advice to management to change direction in an existing program or project as warranted by scientific or technological development. (10%); Acts as a mentor to other associates, helping them to develop excellent technical, problem solving, and leadership skills. (10%); Serves as a technical expert for the company in the development and application of advanced materials and associated processing technologies. (10%) Requirements: Ph.D. in Metallurgy, Materials Science or similar field and 24 months of experience in a Materials Engineer or similar position. Experience must include expertise in corrosion testing and materials characterization using SEM-EDS and XRD. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.

Job Description Infrastructure Controls Engineer Type: Full-Time An established food and beverage production company is seeking a highly skilled Controls Infrastructure Engineer to join its corporate engineering function. This role will focus on sustaining and improving the core infrastructure behind the organization's automation and industrial control systems across multiple facilities. The position is rooted at the Wooster, OH manufacturing site and supports facilities nationwide through both direct engagement and remote system support. This person will be responsible for ensuring uptime, patching, access management, cybersecurity compliance, and performance integrity of the control environments. Key Responsibilities: Oversee the performance and availability of plant-wide automation systems, ensuring that firmware and software platforms are kept secure and current. Maintain and manage the lifecycle of Rockwell-based applications including but not limited to AssetCentre, Studio5000, and FactoryTalk View SE, ensuring licensing compliance and routine updates. Support MES and SCADA systems running on AVEVA System Platform, with responsibility for patching, license management, backups, and operational reliability. Build and configure alert systems to flag anomalies or interruptions within the control infrastructure. Define and standardize hardware, software, and network configurations for engineering servers used across all production sites. Review, validate, and schedule OS updates for automation servers, coordinating with internal IT and plant stakeholders to avoid operational downtime. Author and maintain documentation on control system standards, network topologies, and system configurations. Establish and enforce backup/recovery protocols for automation assets and ensure backup execution aligns with corporate disaster recovery strategies. Manage and monitor industrial networks such as Ethernet/IP, Device Level Ring (DLR), and ControlNet, coordinating with IT to safeguard reliable communication and secure segmentation. Handle provisioning and audits of access control for engineering and automation users in accordance with internal policy. Respond to technical service tickets for issues relating to PLCs, AVEVA applications, and other automation infrastructure using the company's internal helpdesk platform. Assist in evaluating hardware and software obsolescence across all sites and propose remediation plans. Provide input on design and architecture documentation for automation panels, control cabinets, server racks, and networked devices. Requirements: Must-Have: 5+ years of experience in control systems or industrial automation support, particularly in manufacturing environments. Proficiency with Rockwell Automation software suites and licensing structures. Strong understanding of PLC and HMI platforms, including update cycles, version control, and security best practices. Hands-on experience with AVEVA System Platform or similar SCADA/MES systems. Ability to configure and maintain Windows-based automation servers and SQL environments. Knowledge of industrial network protocols and topologies (e.g., DLR, ControlNet, managed switches). Familiarity with cybersecurity standards applicable to OT environments. Capable of writing technical documentation, system procedures, and user access protocols. Excellent troubleshooting, root cause analysis, and support desk experience. Preferred: Bachelor's degree in Electrical Engineering, Controls Engineering, Computer Engineering, or related technical field. Familiarity with backup software specific to control systems and experience building automation recovery frameworks. Competency in scripting, diagnostics tools, and system monitoring utilities. Comfortable working in a hybrid IT/OT environment and collaborating with both technical and non-technical teams. Additional Notes: Travel up to 25% may be required to support or upgrade control infrastructure at additional production sites. This is a hands-on engineering role situated within a regulated, clean, and highly automated manufacturing setting.