Engineer jobs in Cape Coral, FL - 82 jobs

The role of Field Engineer is critical as the entry-level liaison between office and field operations to provide communication and support such as technical expertise, material management, and execution of design in accordance with the production budget and customer expectations. DUTIES, TASKS, AND RESPONSIBILITIES Strategic Support (30%) * Independently coordinate all mechanical and structural systems needed for each project to ensure proper scheduling between all vendors * Autonomously review, analyze, and resolve field construction issues, discrepancies, or interferences with A/E, owner and/or contractor * Confidently participate in all BIM meetings; carefully develop adjustments in design as required utilizing appropriate software and design tools * Accurately create and submit weekly project reports including oversight and management of budgets * Thoroughly communicate progress and project status with leadership * Proactively drive for job site safety with entire project team Engineering (35%) * Precisely establish exterior-interior point locations and working lines and help evaluate additional potential dimensions * Correctly establish control points and lay out all under-slab, sleeve, and in-bed locations * Accurately create isometrics and detail views required for installation * Carefully perform heat gain and loss calculations to properly select and/or verify mechanical equipment type and size; ensure safe and effective equipment starting and testing * Analytically create plumbing design to properly size DWV, water & PRV zones, and gas piping * Clearly translate and maintain "As-Built" drawings and digital design into physical installation for field personnel and provide support throughout the project * Efficiently answer on-site code and design requests to ensure work complies with all engineering standards, codes, specifications, and design instructions and verify installs per the design; communicate issues with non-conformance * Carefully review truss, panel, and structural overlays and shop drawings to ensure no conflicts with design; escalate all potential conflicts and drive to resolution * Proficiently manage submittals to ensure approval as well as communicate and manage changes to ensure alignment with project specifications Project Management (35%) * Efficiently and effectively manages multiple ongoing construction projects simultaneously * Clearly communicates and collaborates with each project team including internal operations, field staff, vendors, and customers to ensure the highest degree of success for project completion and coordinate on-site when needed for redesigns and issue resolution * Proficiently coordinate change orders, expedite material and job site equipment, assist in the preparation of estimates, and compile data to assist in analyzing project progress * Accurately generate and communicate all equipment schedules for the builder, architect, engineer, and other trades as required * Proactively identify and navigate through conflicts affecting installation per job design or possible delays due to site conditions/design or trade conflicts and resolve coordination or schedule issues ORGANIZATIONAL BEHAVIORAL COMPETENCIES * Build something that matters * Do what's right; be honest and fair * Build strong relationships * Share in the company successes POSITION COMPETENCIES * Strategic Orientation - Approaches daily tasks perceiving how each aspect complements the big picture of the project or organization as a whole * Accurate - Performs all duties with careful precision and expertise to ensure quality * Analytical Innovation - Advances the organization through careful development of innovative ideas, systems, and processes to improve upon old methods * Independent - Solves problems and makes decisions autonomously to accommodate the fast-paced nature of projects * Agile - Accommodates multiple priorities and can quickly shift attention to the highest critical need CRITICAL SKILLS & KNOWLEDGE * 4 year degree in BCM, ME, MET or Construction Engineering or 5+ years of construction experience with strong MEP aptitude and proven leadership ability. Minimum 3.0 GPA * Familiarity with basic construction methods and construction document interpretation * Basic knowledge of Building Information Management (BIM) platforms such as AutoCAD, Revit, etc. * Clear, effective communications skills - both written and verbal * Ability to focus and drive projects forward and through to completion * Attitude for prioritizing and problem-solving * Basic knowledge of Microsoft business suite of products; MS Project experience a plus * Disposition for accuracy, attention to detail, and organization * Proven leadership ability * Strong mechanical aptitude * A desire to grow and be challenged. Willing to dive in to a fast-paced and constantly evolving business. * Basic mathematical ability including addition, subtraction, multiplication, and division WORKING CONDITIONS * Indoor and outdoor responsibilities; exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat * Capable and willing to wear a hard hat, boots, and other required personal protective equipment * The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining work spaces * There is a possibility of inhalation of fumes and airborne particles as well as a risk of electrical shock and vibrations * Must be able to do the following activities for most of the work day: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk and hear * Must be able to climb or balance regularly * Limited travel * Capable of lifting at least 50 pounds on occasion * Manual dexterity sufficient to reach/handle items, work with the fingers and perceive attributes of objects and materials HOW YOUR PERFORMANCE WILL BE EVALUATED * Attitude * Initiative * Quality and Quantity of work * Customer and RTM partner satisfaction * Attendance * Safety This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor.

Wharton-Smith, Inc. is seeking a motivated and detail-oriented Field Engineer to join our Commercial Division in North Port, FL. This is an excellent opportunity for an entry-level construction professional to gain hands-on experience in community-focused commercial projects, including schools, fire stations, municipal buildings, and other public facilities. The Field Engineer will work closely with the Project Superintendent and Project Manager to learn the fundamentals of project coordination, layout, and field management. This role provides a strong foundation for a long-term career in project management or field supervision. Key Responsibilities Assist the Superintendent and Foreman with layout, measurement, and field engineering tasks. Support daily project operations, including scheduling updates, document tracking, and field communication. Help prepare and process Requests for Information (RFIs) and submittals. Maintain As-Built drawings, progress logs, and photo documentation. Participate in site inspections, safety meetings, and quality control reviews. Collaborate with subcontractors and suppliers to ensure accurate material deliveries and installation tracking. Gain exposure to estimating, scheduling, and project documentation systems. Qualifications Bachelor's degree in Construction Management, Civil Engineering, or a related field (recent graduates encouraged to apply). Strong organizational, analytical, and communication skills. Proficiency in Microsoft Outlook, Word, and Excel; exposure to scheduling or project management software a plus. Eagerness to learn, take initiative, and grow within a collaborative construction environment. Why Wharton-Smith? At Wharton-Smith, we take pride in building communities, not just structures. From schools to public safety facilities, our projects make a lasting difference. We value integrity, teamwork, and professional growth-and we invest in developing the next generation of construction leaders. We offer competitive compensation, comprehensive benefits, and clear career paths for those ready to start their journey in construction. Launch your career with Wharton-Smith and help us build a stronger North Port-one project at a time.

Job DescriptionDescription: Full-Time Exempt Why Entech? Entech is a growing Managed IT Support Services company with over 27 years of enabling people to do what matters. We value integrity, teamwork, and strong relationships with employees, clients, and the community. Join our family for growth opportunities, a fun environment, and a passion for technology. With offices in Fort Myers, Naples, and Bradenton, we look forward to your application! Position Summary The Project Engineer is a strategic technical position within the organization. This position is responsible for engineering and implementing complex and non-complex projects within scope and budget defined in statements of work. Essential Duties and Responsibilities Implement complex and non-complex solutions that fall outside the coverage of a client Managed Service Agreement. Work with Entech's Partner Success Managers to engineer projects, identify new products and solutions, and research solutions for existing clients and prospects. Work with Entech's outside sales reps to perform IT Assessments, new client consultations and technology audits. Perform new client integration procedures according to project work plans. Design, implementation, and support services for Microsoft related technologies: Windows Server, Microsoft Azure, Microsoft 365, etc. Technical services and support at the network level: WAN and LAN connectivity, routers, firewalls, and security. Implement disaster recovery and business continuity solutions. Updating and maintaining thorough documentation throughout all project lifecycles and updating Entech's technical staff via IT Change Notices. Act as an escalation point within the service department for complex issues that require review. Communication with customers as required: keeping them informed of incident progress, notifying them of impending changes, and agreed outages. Document internal processes and procedures related to duties and responsibilities. Work through project tickets and phases in ConnectWise as assigned by a Project Manager. Preparing and carrying out any necessary training for the service team to support new solutions and applications implemented during a project Responsible for helping to maintain the confidentiality, integrity, and availability of data belonging to Entech and Entech's clients by following security policy and industry best practices. Adheres to Entech's HIPAA and information security policies. All other duties as assigned. Required Technical Skills Proficiency in and ability to implement and troubleshoot: Windows Server and Desktop Operating Systems and Services Microsoft Cloud Systems Microsoft 365 Unified Threat Management Appliances Managed Network Switching Voice over IP Telephony Workstation and Server Hardware Line of Business Applications Managed Security and Mobility Products and Security Architecture and Technologies Business Continuity and Disaster Recovery Systems Required Skills & Abilities Comprehensive knowledge of information systems technology subjects and extensive knowledge of hardware and software with the ability to keep abreast of new technologies. Ability to read and interpret documents, write routine reports and correspondence, and speak effectively in English. Ability to perform basic math computations. Ability to apply common sense and understanding to carry out instructions furnished in written, oral or diagram form. Ability to maintain composure and handle stressful situations. Must be detail oriented, organized, multi-task oriented and possess excellent communication skill Education and Experience High School Diploma or GED (Two years college or equivalent work experience preferred). Three years of related experience or relevant coursework. Two to three years working in a Technical Support/Service Desk environment. Past Managed Service Provider experience provider. Certifications and Licenses Professional IT Certifications, such as: CompTIA Security+ Microsoft MS-100, MS500, or AZ-104 Fortinet, Cisco, or SonicWall certifications Benefits: Free Employee Medical Insurance Additional Employer Paid Medical Options Fully Vested 401(k) Match Flexible Time Off (an unlimited amount of paid time off days) Free $10,000 Life Insurance Policy Six Paid Holidays - PLUS Black Friday! Flexible Schedule Options Fun Employee Events - Yearly Culture Building Events Options available for dental, vision, accident, hospital, short term disability, long term disability, Identity theft protection and additional life insurance. Entech is an Equal Opportunity Employer. Entech participates in E-verify for all employees. This position requires the passing of a level 2 background check as well as a pre-employment drug screening. A valid driver's license is required for this position. Requirements:

Department: IS Information Technology Svcs Work Type: Full Time Shift: Shift 1/ to Minimum to Midpoint Pay Rate:$90,667.20 - $117,852.80 / Annual Lee Health is seeking a highly skilled Advanced Infrastructure Engineer with deep expertise in Microsoft enterprise infrastructure. This role is responsible for engineering, maintaining, and optimizing large-scale Windows Server environments supporting clinical, administrative, and operational workloads across a distributed healthcare system. This position requires advanced proficiency in Windows Server architecture, Active Directory services, virtualization (VMware), automation (PowerShell), and Azure/M365 ecosystems. The ideal candidate brings strong operational discipline, experience in complex multi-site environments, and the ability to engineer robust, secure, and scalable solutions. Core Technical Responsibilities * Architect, deploy, and support Windows Server systems across physical and virtual environments (2016/2019/2022). * Manage full lifecycle of OS builds, configuration baselines, patching, system performance, and capacity utilization. * Engineer and maintain enterprise Active Directory, including: * Domain Services * Group Policy (GPO design, auditing, troubleshooting) * Federation Services (ADFS) * Certificate Services (PKI architecture, renewal workflows, CA hierarchy) * Administer Azure AD / Entra ID, hybrid identity, conditional access, and security baselines. * Support and optimize Microsoft Exchange, M365, File/Print Services, IIS, and enterprise email archiving solutions. * Automate administrative processes using advanced PowerShell scripting, tooling, and orchestration patterns. * Troubleshoot complex infrastructure issues across server, storage, networking, identity, security, and virtualization layers. * Support VMware ESXi clusters, VM provisioning, resource tuning, templates, and host performance. * Contribute to infrastructure security hardening, incident response, and audit/compliance initiatives. * Participate in change, incident, and problem management using ITIL-aligned practices and ServiceNow workflows. * Provide Tier III engineering support for escalated operational issues. * Participate in a rotating on-call schedule to support 24/7 hospital operations. Technical Environment Experience in several of the following technologies is ideal: * Windows Server: 2016, 2019, 2022 * Identity & Access: AD DS, ADFS, GPO, PKI/Certificate Services * Cloud: Azure, M365, hybrid identity * Messaging: Exchange on-prem and Exchange Online * Virtualization: VMware ESXi * Automation: PowerShell (advanced), scripting frameworks, configuration tooling * Networking: DNS, DHCP, load balancing, firewall fundamentals * Storage/Backup: SAN/NAS platforms, enterprise backup strategies (Veeam, Rubrik, Commvault, etc.) * Security: Hardening standards, RBAC, MFA, conditional access, audit logging * Web & App Hosting: IIS, application pools, bindings, cert management * Database: Familiarity with MSSQL configuration and high-level administration Healthcare experience is a strong plus but not required; engineers from other highly regulated or large-scale environments will also excel. Education & Experience * Bachelors degree in Computer Science, Information Systems, Engineering, or related discipline OR equivalent relevant professional experience. * Minimum 4 years of progressively responsible infrastructure engineering experience in enterprise environments. Relevant Certifications Candidates holding advanced infrastructure, cloud, identity, or virtualization certifications appropriate to this level of engineering role are encouraged to apply (e.g., Microsoft, Azure, VMware, security, or equivalent engineering-track credentials). What Makes an Engineer Successful Here * Strong ownership of systems and willingness to go deep into root-cause analysis. * Ability to engineer hardened, production-ready solutions in a mission-critical environment. * Comfort supporting large multi-site or hybrid infrastructures. * Excellent documentation habits and adherence to repeatable processes. * Effective communication with peers, cross-functional teams, and technical leadership. * Desire to innovate, streamline, automate, and reduce technical debt. Why Engineering at Lee Health? * Complex, enterprise-scale environment powering high-impact clinical operations * Opportunities to shape modernization efforts in cloud, identity, automation, and virtualization * Remote flexibility for Florida residents * Not-for-profit, mission-driven stability with ongoing technology investment * Strong engineering community with opportunities for specialization and advancement

Are you looking to join Florida's fastest growing mechanical contracting team? B&I Contractors, Inc., a proud four-time winner of the Great Place to Work certification, is seeking an experienced and dedicated Design Build System Engineer to join our dynamic and expanding team. The goal of the engineer is to promote B&I Contractors' services and solutions to support a "last look" with contract customers, "default spec" with consulting engineers, and "trusted advisor" with account owners. With assistance from the business development manager and others within the company, the Design Build System Engineer will ensure retention of assigned accounts and customers; will partner with other sales engineers and sales representatives from other departments to maximize profit generation from accounts through influence on specifications and project scopes. The Design Build System Engineer utilizes sales tools and tracking software to plan and document progress as well as increase business opportunity in accounts. Achieves quarterly quotas and annual sales goals. Why Choose B&I Contractors, Inc.? * Industry Leader: As Florida's fastest growing mechanical contractor, we specialize in large-scale commercial projects. * Continuous Development: Benefit from our NCCER-certified in-house and online training that equips you with the skills needed to advance in your career. * Comprehensive Benefits: Enjoy employer-paid health insurance, accrued vacation, and sick time, along with a wellness reimbursement program to support your overall well-being. * Retirement Benefits: We are a 100% employee-owned company with an ESOP. You can also participate in our 401(k) plan with company match and explore post-tax Roth IRA options to secure your financial future. * Established Legacy: Join a team of over 1000 employees contributing to our success since 1960, with a proven track record of excellence in mechanical contracting. Key Responsibilities * Provide Electrical design input and continuous estimating from schematic, design development, 50%, to 100% construction documents. * Attend design meetings with owners, architects, engineers, and construction manager. * Perform Electrical system review and economic analysis. * Travel requirements - Geographic requirements include Tampa to Marco Island. * Coordinate trade employees and/or other subcontractors. * Provide technical assistance, i.e., engineering, interpretation of drawings, recommendation of construction methods and equipment, etc., as required. * Conduct on site visits/inspections as required ascertaining installation in compliance with MEP design. * Act as liaison between MEP trades and general construction trades. * Provide field employees with the necessary support to allow the project to be completed expeditiously. * Works in a "plan and spec" environment utilizing the necessary skills to build relationships with clients in a competitive market. * Builds partnering relationships with assigned accounts to drive the penetration of the Electrical Systems. * Maintains frequent face-to-face contact with the customers who most directly influence purchasing decisions with the client corporation. Actively listens, probes and identifies concerns. * With assistance from the VP of Electrical Operations, addresses concerns and performance lapses immediately and understands the customer's business, speaking their language. Develops credibility, loyalty, trust and commitment. * Supports the goals of the company, performs take-offs and bids the full spectrum of the market with the full spectrum of B&I Contractors' services and equipment offerings. * With consulting engineers, drives specifications of the full spectrum of projects towards products and brands offered by B&I Contractors. * With assigned owner accounts, the sales engineer should actively drive a preference for B&I Contractors' all-inclusive services, expansive product offerings, wealth of experience, and knowledge of the market. * Keeps management informed of progress toward achieving goals and account statuses. Calls for assistance from manager to keep the sales process moving as needed. * Demonstrates technical knowledge by writing the specification or matching the proposal to the building specifications to provide value to the customer and favorably position B&I Contractors to competitively bid and win the project. * Under direction from the business development manager, qualifies and assesses potential customers, accounts, and market segments. Teams with colleagues on individual projects based on account assignments, and refers leads to other departments as the opportunity arises. * Develops relationships with internal support and administrative staff to ensure customer satisfaction and effectively and efficiently address issues. * Manages customer purchases orders in relation to original proposals/estimates and forwards documentation to the appropriate individual for processing. * Participates in professional organizations and attends industry trade shows to build relationships and increase knowledge of market offerings. * Perform other duties as assigned. Qualifications * Four year Bachelor's degree in Electrical Engineering. * Excellent working knowledge of NEC Standards, Florida Building Code (Mechanical & Energy). * EIT will be required within one year of employment. * Previous construction and/or engineering office related experience is not required, but preferred. * Proficient in Microsoft Word, Outlook & Excel. * Experience working with Trimble Accubid Anywhere electrical estimating software. * CAD experience with Revit is preferred. * Possess Strong communication, analytical and organizational skills. * Excellent trouble shooting and problem solving skills. * Prior related internships and/or summer experience are desired. * This position requires the ability to lift and carry materials weighing up to 50 pounds on a frequent basis. The employee must be able to perform tasks involving physical labor, including lifting, pushing, pulling, and carrying materials, tools, or equipment. Manual material handling must be performed in accordance with OSHA safety standards and company policies to minimize risk of injury. * Esta posición requiere la capacidad de levantar y transportar materiales de hasta 50 libras de manera frecuente. El empleado debe poder realizar tareas que involucren trabajo físico, incluyendo levantar, empujar, jalar y transportar materiales, herramientas o equipo. El manejo manual de materiales debe realizarse de acuerdo con los estándares de seguridad de OSHA y las políticas de la compañía para minimizar el riesgo de lesiones. Ready to grow your career with a respected, employee-owned leader in mechanical contracting? Apply now and be a part of something built to last. B&I Contractors is committed to maintaining a safe and productive work environment. We are a drug-free workplace.

GARNEY CONSTRUCTION A Project Engineer position is available in Cape Coral, FL. This position will act as the backbone of the project management team and keep the job on track. Great attention to detail and the ability to organize and plan will ensure success in this position. WHAT YOU WILL BE DOING You will assist the project management team with tasks such as negotiating and purchasing materials, maintaining documents, and acting as a point of contact with owners, architects, and engineers. Responsibilities: * Create Submittals and RFI's. * Coordinate projects from start to finish. * Assist with estimating. * Project setup & closeout. * support field operations. * maintain detailed job costs. * Work professionally with owners and engineers. * Assist in scheduling projects and crews. WHAT WE ARE LOOKING FOR The ideal candidate will have a degree in civil engineering, construction management, or another related field and is willing to travel and work the days and hours required to ensure the project's success. This position is perfect for someone seeking entry-level project management experience with an industry leader. LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. * Health, Dental, Vision, and Life Insurance. * Health Savings Account (HSA) / Flexible Spending Account (FSA). * Long-term Disability, Wellness Program & Employee Assistance Plans. * Holidays and PTO CONTACT US If you are interested in this Project Engineer position in Cape Coral, FL. then please APPLY NOW. For other opportunities available at Garney Construction, go to careers.garney.com. If you have questions about the position or would like more information, please contact Jody Roberts - by email *********************** Garney Construction and its subsidiaries are committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Garney Construction is a background screening, drug-free workplace. Agency Disclaimer: All vendors must have a signed Garney Construction Agreement, authorized by the Executive Team, to receive payment for any placement. Verbal or written commitments made by anyone other than a member of the Executive Team will not be considered binding. Any unsolicited resumes sent to Garney Construction or submitted to employees outside of the Recruiting Team will be deemed the property of Garney Construction. In such cases, Garney Construction will not be obligated to pay any placement fees. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Fort Myers Nearest Secondary Market: Cape Coral

CPH is a multi-disciplined Engineering and Architectural design firm that ranks in the nation's Top 500 Design Firms by ENR Magazine. Are you an entry-level engineering professional or recent graduate with internship experience? This might be a fantastic position for you to advance your passion in the civil and/or environmental space! This is a great opportunity to join a dynamic and highly collaborative team. CPH has an opening in our Ft. Myers, Florida office location for the following position: * Project Engineer (EIT/EI) - Civil/Environmental What You'll Do: * -Primary Duties-- * Preparation of design plans, specifications, and reports for a variety of water/wastewater and stormwater projects which may include transmission, distribution, collection, treatment, storage, utility master planning, permitting and various engineering tasks. * Hydraulic modeling including stormwater pre/post and advanced treatment and storage design along with water and sewer pumping systems and hydraulic water distribution modeling. * Ability to successfully interact with various public and private clients and other jurisdictional agencies. * Performing assignments requiring application of standard techniques, procedures and criteria to carry out engineering tasks. Assignments are designed to further develop judgment and understanding of professional and ethical responsibilities. * Review of design plans and comparison to accepted municipal standards and details. * Preparing engineering related calculations and develop drawings and visual aids. * Working on a wide range of projects and tasks and assist with field research, data collection, data analysis, graphics, maps and data presentation, and report development. * Management of time and workload to stay on schedule and within budget. * Limited travel to assist with site investigations, construction observation and project transmittals. What You'll Need: * -Requirements-- * Bachelors or Master's Degree in Civil Engineering or Environmental focus. * E.I Certificate preferred or eligible and scheduled for FE exam. * Detail-oriented individual with strong technical and organizational skills * Proficiency in spreadsheets, word processing and standard office software. * Works well in multidisciplinary team environments and ability to meet deadlines. * Strong oral presentation and written communication skills. * Experience with AutoCAD, Civil3D, WaterCAD, ICPR and other modeling software is preferred. * Valid state-issued driver's license with a clean driving record. What We Offer: * -Compensation & Benefits-- * Dependent upon experience. * CPH offers Medical, Dental and Vision and Long-Term Disability with a quality insurance company. * Company Paid Life Insurance and Short-Term Disability. * 401K, Paid Personal Time Off, Paid Holidays, and Paid Parental Leave. CPH is an Equal Opportunity/Affirmative Action/Drug Free Work Environment Employer.

Job DescriptionDescription: JOB SUMMARY: Responsible for the drafting and engineering of highly detailed shop drawings to be submitted to clients for approval, as well as given to fabrication for production of monumental quality architectural millwork, cabinetry, and furniture for luxury residential environments. Research production requirements and specifications, as well as new technologies. Creates and manages project-specific detail book and CAD blocks. Monitors and manages the project drafting team by reviewing and redlining project drawings. Works closely with the Project Management team to ensure schedule and monumental quality are maintained. ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following: Field measurements (i.e., benchmarks, datum lines) Define and create a detailed book for the assigned work Ability to generate detailed submittal drawings and to incorporate design changes and field dimension corrections as needed, and work with project teams. Ability to manage and utilize information flow from the project team, both internally and externally Collaborate with other engineers and draftspersons inside and outside of the organization Interface with customers and internal project management to ensure design concepts meet the client's needs, and drawing releases meet schedule timelines Interface with the fabrication team to ensure an accurate understanding of required details and quality control Provides project management with status updates, correspondence, and appropriate reporting utilizing the company's software and systems. Create material and parts lists Perform shop floor inspections for accuracy and quality before releasing to Finishing Post-production sign-offs & updating as-built drawings In-depth knowledge of custom architectural millwork/cabinetry fabrication, joinery details, materials (i.e. lumber, veneers, substrates), cabinet and door hardware, integration of appliances, metal, glass, mirror, etc. Works with the Project Manager to assist in scheduling engineers on various WOs. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Some stress may occur. The noise level in the work environment is generally quiet. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel in order to use a telephone keypad and computer keyboard and mouse. The employee must be able to remain in a stationary position at a maximum of 50% of the time. Must frequently be able to move boxes (for shipping) weighing up to 50lbs. Specific vision abilities required by this job include close vision. Requirements: QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience 4-Year degree in Design or related subject. Minimum of 10 years' experience in the custom woodworking industry and knowledge of AWI standards 5 to 7 years of AutoCAD experience Must possess strong statistical and mathematical aptitude, as well as a solid understanding of the English language Language: Ability to read, write and speak English and effectively present information in one-on-one and small group. Mathematics: Ability to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals. Computer: Strong proficiency of AutoCAD, Windows-based applications and the Microsoft Office suite. Reasoning: Ability to apply common sense and understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Other: Exhibits professionalism of improvement through enhanced developmental skills, exhibit leadership. Requires the individual to maintain flexible availability, will work weekends, and holidays. Strong work ethic and positive attitude. Serves as a role model and sets a positive example for the entire staff in all aspects of business and personnel management. Unwavering commitment to the highest standards of quality and service. Ability to quickly adapt to company standards and processes. Fluency of the English language. Communication, organizational and interpersonal skills are essential. Must share Thomas Riley Artisans' Guild Core Values. Other Qualifications Possession of a valid State of Florida Driver License with a clean driving record in accordance with the company's insurance carrier's standards may be required. Thomas Riley Artisans' Guild provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Thomas Riley Artisans' Guild participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Company Name: Baker Concrete Construction, Inc **Req ID** : 7120 **Travel:** Up to 25% **Number of Openings:** 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. **Summary** The **Project Engineer** supports field activities and spends a majority of time working with the Project Manager supporting project administration on multiple small projects, or one medium to large-size projects. Activities include managing the job transition process; and supporting the management of cost and schedule, constructability, technical evaluations, quality, safety, work planning, procurement, contract management, regulatory compliance, etc. **Roles and Responsibilities** The **Project Engineer** will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. + Generates and obtains approvals of monthly billing and earned values + Develops and manages the project schedule on small or mid-sized projects + Analyzes targets and goals, job cost summaries, and other reports + Alerts the Superintendent and Project Manager of project impact relating to resource management, crew make-up/size, etc. + Generates and obtains approval of the initial budget and subsequent updates, and reviews weekly job cost summaries and advises the Project Manager + Generates estimates of change orders and may interface with pre-construction on original bids + Collaborates with pre-construction and the project team to manage the job transition process, communicate project requirements, and develop the initial procurement plans, budgets, etc. + Generates material quantity take-offs, scoping documents, terms and conditions, delivery, etc. as applicable to support the procurement process + Generates requests for proposal(s), solicits and reviews quotations, and recommends a procurement decision to Project Manager + Prepares field purchase orders for standard purchase packages, and generates and obtains approval of Major Purchase Orders + Gathers and roughs-in monthly financial reports, and participates in the project financial reviews + Works with the Project Manager to approve and code project invoices + Generates and obtains approval of technical records such as constructability reports, RFI's, inspection records, work packages and deviation reports + Coordinates with the Superintendent, Field Project Engineer, and Line and Grade to generate required as-built records + Manages work package closure, punch lists, and project turnover process and approves pre- and post-pour checklists + Collects necessary documentation to identify and determine impact of potential contract changes, disputes, and claims + Leads LEAN/SQP committee and identifies improvement opportunities + Ensures all subcontractors are in compliance with terms of subcontracts, generates, and obtains approval on impact notices as needed + Reviews and confirms reports documenting compliance (Company and subcontractors) with prevailing wage, workforce utilization, MBE/SBE participation, etc., and advises the Project Manager of issues + Interfaces with Safety and Risk Management in establishing clinics, managing first report of injuries, and assisting with co-worker case management + Follows Company Recruitment and Hiring Guidelines + May conduct new-hire orientation and process E-Verify (must be certified) + May coordinate tracking and completion of training requirements with project management **Requirements** + Bachelor's degree from an accredited college or university and 2 years' of experience or 6 years' of construction related experience and/or training; or equivalent combination of education and experience + Proficiency in Microsoft software programs such as Word, Excel, and PowerPoint The following competencies are needed to successfully perform this job: + Ability to read, analyze, and interpret general business documents, technical procedures, and government regulations + Ability to write reports, business correspondence, and procedures + Ability to communicate well with all levels of workers involved with the project + Ability to apply concepts such as fractions, percentages, ratios, proportions, geometry, and trigonometry to practical situations + Ability to analyze and compute mathematical differences from all stages of drawings from conceptual to final drawings including development of shop drawings Ability to understand Cost Accounting + Basic understanding of construction software such as Primavera, Timberline, Vista and the like + Ability to understand, customize and modify spreadsheets + Ability to direct work and evaluate strengths and weaknesses of co-workers + Ability to work in a team environment + Ability to define problems, collect information, establish facts, and draw valid conclusions + Ability to develop construction schedule via the critical path method + Ability to understand contracts, specifications, drawings, and scope of work + Ability to be proactive in maximizing our return on investment at all time At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR.

LEMOINE, a Great Place to Work-Certified company, is currently seeking a Recovery Project Engineer. The Recovery Project Engineer assists and supports the Project Management staff in the planning and implementation of a project. Enhances customer relationships by providing excellent service. Responsible for assisting the Project Manager with contract administration, procurement, subcontract awards, scheduling and costing, oversight of project quality and safety, compliance, and customer service, all in an effort to minimize risk and to keep the focus on LEMOINE's Foundations for Successful Execution Job Responsibilities: * Manage and maintain project documentation to ensure compliance with program standards and requirements. * Efficiently process and track change orders through the project management system to support project adjustments. * Review and verify scopes of work to ensure accuracy and alignment with project objectives. * Verify internal systems data is updated promptly and accurately to maintain project integrity and transparency. * Assist in generating and compiling reports to provide insights into project progress, budgets, and timelines. * Monitor and verify adherence to quality standards and project specifications during construction phases. Required Qualifications: * Bachelor's Degree from an accredited university in Construction Management, Engineering, or a related field, or equivalent work experience. * Internship experience in the commercial construction industry preferred. * General knowledge of construction management, project planning, scheduling, and estimating for multiple trade disciplines. * Proficiency in Microsoft Office Suite. * Strong math, organizational, written, and verbal communication skills. Physical Requirements: The physical and mental demands of this position must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands to finger, handle, or feel, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl. The employee must be able to occasionally lift and/or move up to 50 pounds.. Section 3: This position is a Section 3 eligible job opportunity under the Housing and Urban Development Act of 1968. Section 3 residents are encouraged to apply. The purpose of Section 3 of the HUD Act of 1968 is to ensure that preference for employment opportunities generated from the expenditure of HUD funds is directed to local low and very low-income persons, particularly those who receive federal housing assistance. All qualified applicants will be considered but may not necessarily receive an interview. Due to the large volume of submissions received by this office, information concerning application and/or interview status cannot be provided. Selected applicants will be contacted for next steps in the interview process. Applicants who are not selected may not receive notification. This position is subject to close at any time once a satisfactory applicant pool has been identified. Equal Opportunity Employer The Lemoine Company, L.L.C. is an Equal Opportunity Employer. All applications are considered without regard to race, color, sex, age, religion, national origin, or disability. Only job-related factors will be considered in deciding applicants' qualifications for positions.

The Systems Engineer II completes system installation and management, system monitoring and performance tuning, diagnostics and troubleshooting, user support coordination, backup and storage management, data center maintenance, infrastructure upgrades, and other related tasks. Typical duties include but not limited to: * Assists in design, development, support and maintenance of systems infrastructure. * Completes system installation and management, system monitoring and performance tuning, diagnostics and troubleshooting, user support and testing coordination, backup and storage management, data center maintenance, infrastructure upgrades, and other related tasks. * Administers application security and configurations. * Ensures data/media recoverability by implementing a schedule of system backups and database archive operations. * Conducts routine infrastructure and security audits to ensure compliance with established standards, policies, and configuration guidelines. * Monitors and maintains continuity with system licensing and maintenance agreements. * Serves as an escalation point for IT User Support Specialist and Systems Engineer I. * Tracks problems in the work order system. * Maintains records, forms, and standard operating procedures documentation. * Develops new techniques and procedures to enhance university systems infrastructure. * Reviews processes, evaluates results, recommends new processes, and promotes best practices. Additional duties: * Performs other job-related duties as assigned. Additional Job Description Required Qualifications: * This position requires either seven years of directly related full-time experience or, as an alternative, a Bachelor's degree in Computer Science or related field and three years of full-time experience directly related to the job functions. * Professional full-time experience with enterprise systems and applications and current versions of Windows Server and Linux or other enterprise services. * Experience with large enterprise computing environments that include multiple site locations. * Experience with Identity Management, Disaster Recovery procedures and domain administration. Preferred Qualifications: * Five years professional, full-time experience with application system support and implementation in a medium to large computing environment. Knowledge, Skills, & Abilities: * Knowledge of basic networking concepts (e.g. Systems, Protocols, Directory Services). * Knowledge and proficiency with relevant business systems, operating systems, and servers. * Knowledge of and ability to administer local and cloud based applications (SaaS) such as Azure/AWS and/or Office 365. * Skill in shell scripting/automation, project management of small initiatives, and troubleshooting. * Skill in managing servers and storage hardware. * Skill in using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. * Excellent interpersonal skills. * Advanced verbal and written communication skills and the ability to present effectively to small and large groups. * Ability to take initiative to plan, organize, coordinate and perform work in various situations when numerous and competing demands are involved. * Ability to collaborate and work effectively within the community and willingness to contribute to a team effort. * Ability to work independently and follow through on project assignments. * Ability to provide professional customer service and act as a customer advocate Pay Grade 18 FGCU is a State University System of Florida member and an Equal Opportunity and Equal Access employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, or protected veteran status.

Job Description DUTIES AND RESPONSABILITIES 2.1 Determine Processing Requirements to produce cost effective conforming product. 2.2 Create, edit, and support documentation efforts for process development and continual improvements (i.e. Work Instructions, PFMEAs Process Flow, etc.) as needed. 2.3 Create, edit, and support quality on dimensional inspections. 2.4 Determine, document methodology for inspection specifications for setting up inspections, to include but not limited to, gage designs and prints, etc. 2.5 Receives requests from staff and reviews drawings for accuracy prior to release to the floor, including but not limited to, creating/updating Exalta blank and in-process prints. 2.6 Evaluates data to identify deviation from specifications to communicate to management. 2.7 Develop manufacturing blueprints, routers, BOMs, and other supporting documents. 2.8 Create validation protocols based on Master Validation Plan and customer specific procedures execute approved validations protocols and create validation summary reports. 2.9 Support production flow of prototypes, verification runs, etc. Support initial production runs and support Design for Manufacturability reviews for customer feedback. 2.10 Design and develop tools, fixtures for standardization of processes for improved manufacturability and throughput. 2.11 Review and conduct root cause analysis on deviations that were identified during validation activities and resolve the deviated condition or justify why the deviation is acceptable. 2.12 Understand and work toward Engineering objectives, cost containment, process development, root cause analysis, data analysis, etc. 2.13 Evaluate and improve manufacturing processes by applying knowledge of product design, fabrication, assembly, tooling and materials. 2.14 Manage projects and flow of the design transfer process through prototyping and into production including but not limited to reporting status, timeline development, etc. KEY SKILLS, KNOWLEDGE, AND COMPETENCIES 3.1 General Knowledge and understanding of IS0 13485 and FDA 21 CFR 820 as it pertains to process, inspection, validation, verification, design control, and documentation, etc. 3.2 At least 3-5 years of experience in Product Development, Quality Control, Quality Assurance and/or Manufacturing Process position at a Medical Device manufacturer preferred. Design and Machining experience a plus. 3.3 SolidWorks software knowledge and experience a must. 3.4 Minitab analysis knowledge a must. 3.5 Ability to read blueprints, customer/internal specifications, and procedures 3.6 Detailed knowledge of using precision measuring instruments. The instruments should include, but not be limited to calipers, ID and OD micrometers, depth gages, indicators, and plug and tread Go/ No Go gauges. 3.7 Detail Oriented as shown by documented measurement accuracy, to include but not limited to print reviews, document reviews, and organizational skills. 3.8 Proficient English communication skills- reading, writing, and speaking- as it relates to the job, Spanish a plus. Provide verbal instruction and training to the other personnel and operators on implementation of processes, inspection methods, performing validations, and proper documentation. 3.9 Skilled in basic math including but not limited to adding, subtracting, multiplication, division, and basic algebra for the purpose of calculating specifications and engineering calculations. 3.10 Skilled in adapting to a changing work environment, competing demands and ability to deal with frequent change, delays or unexpected events while maintaining timelines. 3.11 Skilled in adapting to a changing work environment, competing demands and ability to deal with frequent change, delays or unexpected events while maintaining timelines. 3.12 Skilled in working independently, following through with assignments with minimal direction. Leadership skills a must. 3.13 Reasoning skills including but not limited to to comparing, classifying, analyzing and coordinating- minimizing duplication of effort. 3.14 Evaluate and improve manufacturing processes by applying knowledge of product design, fabrication, assembly, tooling and materials. EDUCATION, CERTIFICATIONS, AND/OR LICENSES REQUIREMENTS: B.S. in Mechanical Engineering, Manufacturing Engineering or equivalent PHYSICAL REQUIREMENTS: Ability to lift up to 50 lbs. and operate material handling equipment safely PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS: Safety glasses on the manufacturing floor.

General Description The City of North Port strives to be an employer of choice and most of our employees turn jobs into long term careers. The salary shown in the is the full range for this position from entry to later career. NEW EMPLOYEES ARE HIRED AT, OR NEAR THE ENTRY POINT SHOWN, DEPENDING ON QUALIFICATIONS AND RELEVANT EXPERIENCE. GENERAL DESCRIPTION: Responsible professional administrative and technical position providing high level engineering and management support to the Utilities Engineering Division Manager and Assistant Director in administrative and engineering aspects of the Utilities Department, including asset management. The Utilities Engineer may have direct or indirect supervision responsibilities. Position reports to Utilities Engineering Division Manager. Essential Job Functions * Provides support to the Utilities Engineering Division Manager and the Assistant Director in the development and management of the engineering and construction of the City's utility systems. * Organizes, manages, directs and performs the planning, budgeting, engineering, design, permitting, construction, and related functions for capital and non-capital projects for the utilities Department. * Evaluates and makes engineering recommendations for specific system expansion projects, process control changes and general system improvements with emphasis on longevity and cost effectiveness. * Manages the engineering support for the asset management program for water, wastewater, and reclaimed water infrastructure, including both linear and vertical assets in the city's utility system. * Leads risk, criticality, and condition assessment programs to plan for repair and replacement of infrastructure. * Provides engineering advise for establishing and managing Asset Management Plans (AMPs) for the City's assets. * Collaborate with teams that support asset management, including but not limited to various operations and maintenance departments and programs. * Serve as an internal technical resource to the asset management program team. * Participate in the preparation of the Department's budget and capital improvement programs. * Develops capital improvement plan to implement system improvements with consideration for cost-control and cost-reduction methods. * Oversees the preparation of all bid specifications, documentation and permits for all construction and capital improvements, including the preparation of the Request for Bids (RFB) and calculation of liquidated damages. * Construction administration and management for capital improvement projects. * Conduct field meetings and inspections of utility construction, as needed. * Coordinating with regulatory agencies for project approvals during design and compliance during construction. * Provides engineering recommendations for the permitting of the water treatment plant and the wastewater treatment plant facilities such as consumptive use permitting and operating permits. * Represents the department in Staff Development Review meetings and reviewing of all plans of developers, as needed. * Supervises. assigns, and schedules work assignments to direct and indirect reports in the engineering division. * Manages the work of consulting engineers. Prepares Requests for Letters of Interest (RLI), review of Letters of Interest (LOI), and evaluation and ranking of consultants in the NPU engineering library for projects related to Capital improvements. Prepares Request for Proposals (RFP) for selection of consulting firms for design projects and studies. * Meets with developers, realtors, builders, etc. to coordinate and explain utility requirements and standards regarding future developments within the City. * Makes recommendations to the Utilities Engineering Division Manager for engineering and contract services. * Contributes to the creation of departmental presentations and may present for Commission meetings, other formal conferences, regulatory agencies, etc. * Coordinates with and attends meetings with FDOT on their programs that are within the City limits. * Responsible for preparing and NPU approving permits in FDOT rights of way. * Preparation of a monthly status report, attendance, and participation in monthly coordination meetings at Sarasota County with all local utility partners (TECO, Sarasota County, Sunshine 811, Frontier, FDOT, etc.) * Assists in the preparation and supervision of emergency operations and development of procedures to ensure the safe operation of the water/wastewater systems, to include meeting all OSHA requirements. * Assists in establishing and maintaining Standard Operating Procedures. * Responsible for updating Standard Specifications and Standard Details utilizing AutoCAD on an as needed basis. * Assists the Utilities Engineering Division Manager in the creation and review of City ordinances, resolutions, reports and presentations. * Directs the Engineering Department in the absence of the Utilities Engineering Division Manager. (These essential job functions are not to be construed as a complete statement of all duties performed. Employees will be required to perform other job related marginal duties as required.) Knowledge/Skills/Abilities * Knowledge of utility engineering and construction practices and water and wastewater utilities procedures. * Knowledge of rules and regulations regarding utilities programs. * Knowledge of rules and regulations with particular reference to federal and state utility regulations. * Knowledge of civil/environmental engineering practices as it relates to water and wastewater construction and operations. * Knowledge and practice of project and construction management. * Skilled in the use of small office equipment, including copy machines or multi-line telephone systems. * Ability to apply mathematics to engineering work. * Ability to organize and communicate effectively and be an organized team player. * Ability to prepare complex reports and statements. * Ability to prepare specifications and permitting for water and wastewater projects. * Ability to create public presentations and present in a professional setting. * Ability to analyze work methods and procedures. * Ability to communicate, interpret and explain ordinances, policies, etc. to the public. * Ability to express ideas effectively orally and in writing. * Ability to work in a team environment and to establish and maintain effective working relationships with employees and the public. * Ability to plan, schedule, coordinate and review the work of subordinates in a manner conductive to full performance and high morale. * Ability to utilize computer hardware and software effectively (Word, PowerPoint, Excel, AutoCAD, Smartsheet or other Project Management Software). Education, Experience, Licenses and Certifications Education and Experience: * Bachelor of Science Degree in Civil/Environmental Engineering, or related field is required. * Master's degree is preferred. * Ten (10) years of work experience in civil/environmental/water/wastewater engineering. (A comparable amount of relevant training, education and/or experience may be substituted for the above qualifications.) Licenses and Certifications: * Must possess a valid Florida Driver's License. * Licensed Professional Engineer in the State of Florida or ability to obtain within six (6) months Emergency Response Responsibility Every City employee has emergency response responsibilities, though not every position will require routine assignments during an emergency event. All employees are subject to recall around the clock for emergency response operations, which may require irregular work hours, work at locations other than the normal work location, and may include duties other than those specified in the employee's official job description. Assignments in support of emergency operations may be extensive in nature, with little advance notice, and may require employees to relocate to emergency sites with physically and operationally challenging conditions. Hiring Range Statement Please note, the hiring pay range for this position isthe minimum up to a rate equal to or less than the midpoint of the salary range. Vets Preference Statement The City of North Port, FL is an Affirmative Action/ADA/Veterans' Preference and Equal Opportunity Employer. Women, Minorities, and Persons with Disabilities are Encouraged to Apply.

General Summary & Essential Responsibilities Are you ready to take the next step in your engineering career and make a visible impact in your community? As an Engineer II, you'll play a key role in shaping and maintaining essential County infrastructure. This mid-level position offers the opportunity to apply your technical expertise independently while collaborating with experienced engineers on projects that serve the public good. You'll plan work details, make sound technical decisions, and tackle meaningful engineering challenges, all within a supportive environment that values professional growth, problem-solving, and public service. Min. Education, Licenses and Certifications Education and Experience: An equivalent combination of relevant training, education and experience: * Bachelor's Degree: * Civil Engineering * Environmental Engineering * Three (3) years of experience in civil or environmental engineering. Licenses and/or Certificates: * Must maintain a valid driver's license. * Preferred: * Professional Engineer (P.E.) license. Knowledge, Skills and Abilities An Engineer II for Charlotte County Utilities is a key contributor to the planning, design, and construction of essential water, wastewater, and utility infrastructure that keeps our community running. This role involves reviewing and approving utility plans and permits, interpreting as-built drawings and technical reports, and preparing bid packages and construction documents. You will ensure all work meets County and industry standards. Serving as a trusted technical resource, you will provide technical guidance to contractors, vendors, and customers while delivering responsive problem-solving and exceptional service to support safe, reliable utility operations countywide. Supplemental Information PHYSICAL DEMANDS Walking, sitting, hearing, seeing up close, talking, standing, finger movement, repetitive motions, depth perception. WORK ENVIRONMENT Work is performed in a relatively safe, and secure work environment. RISK/SAFETY CONDITIONS The position requires no exposure or risk related to physical and/or mental health and safety. To perform this job successfully, an individual must be able to perform the essential job functions satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary job functions herein described. Since every duty associated with this position may not be described herein, employees may be required to perform duties not specifically spelled out in the , but which may be reasonably considered to be incidental in the performing of their duties just as though they were actually written out in this job description. Charlotte County is an Affirmative Action/ADA/Veterans' Preference and Equal Opportunity Employer. Women, Minorities, and Persons with Disabilities are Encouraged to Apply.

Systems Engineer II serves as a technical professional responsible for designing, implementing, and supporting enterprise endpoint management and systems infrastructure. This position functions as a subject matter expert in modern device provisioning, automation, enterprise software deployment, and Microsoft 365 endpoint workloads. Systems Engineer II supports FGCU's modernization strategy by helping transition device management from traditional imaging (SCCM) to modern cloud-based provisioning through Microsoft Intune, Windows Autopilot, and related Microsoft 365 tools. Typical duties include but not limited to: * Assists in the design, implementation, and maintenance of enterprise-level endpoint and systems infrastructure services. * Serves as a subject-matter expert for Microsoft Intune, Windows Autopilot, Endpoint Security, and Windows Update for Business. * Supports Microsoft 365 workloads, including device configuration, compliance policies, and conditional access. * Enhances automation using scripting languages such as PowerShell, Intune configuration scripts, or API integrations. * Performs troubleshooting, monitors system performance, and ensures endpoint security compliance. * Develops and maintains system documentation, diagrams, and operational runbooks. * Participates in technology evaluations, testing, and implementation of new endpoint solutions. * Supports the transition from imaging to provisioning and the lifecycle management of Windows and mac OS devices. * Assists System Engineer team members with technical issues. * Participates in business continuity and disaster recovery planning as it relates to endpoint infrastructure. * Supports cross-training initiatives and staff development efforts within the Endpoint Deployment Team. Additional Responsibilities: * Performs other job-related duties as assigned. Additional Job Description Minimum Qualifications: * This position requires six years of directly related full-time experience or, as an alternative, a Bachelor's degree in Computer Science or related field and two years of full-time experience directly related to the job functions. Preferred Education: * Master's degree from an accredited institution. * Experience using enterprise endpoint management systems such as Intune, SCCM, JAMF, or similar MDM/UEM tools to deploy software, apply configuration and security policies, manage updates, and maintain device compliance. * Experience with PowerShell or similar scripting tools to assist with automation, troubleshooting, and configuration management * Experience with server system products involving a variety of software and hardware implementations. * Microsoft Certified: Endpoint Administrator Associate * Microsoft 365 Certified: Administrator * JAMF Certified Admin (JCA) * CompTIA Security+ * ITIL Foundation * VMware Certified Professional Knowledge, Skills, & Abilities: * Knowledge of networking concepts (e.g. Systems, Protocols, Directory Services). * Knowledge and proficiency with relevant business systems, operating systems, and servers. * Knowledge of and ability to administer cloud-based applications (Saas). * Skill in managing servers and storage hardware. * Skill in using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. * Advanced verbal and written communication skills and the ability to present effectively to small and large groups. * Ability to take initiative to plan, organize, coordinate and perform work in various situations when numerous and competing demands are involved. * Ability to work independently and follow through on assignments. * Ability to provide professional customer service. * Ability to present technical strategies to leadership; produce clear diagrams/runbooks; mentor/train staff. * Diagnose complex issues; design and implement solutions; set standards; plan long term improvements. * Scope/plan/manage complex projects, budgets, timelines, risks; deliver status to stakeholders; run post implementation reviews; ensure business continuity. * Handle escalated issues; design user centered solutions for faculty, staff, and students; empathetic stakeholder management. * Lead cross team initiatives; influence direction; drive change management and culture of accountability/continuous improvement. Pay Grade 18 FGCU is a State University System of Florida member and an Equal Opportunity and Equal Access employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, or protected veteran status.

GARNEY CONSTRUCTION A Project Engineer position is available in Location. This position will act as the backbone of the project management team and keep the job on track. Great attention to detail and the ability to organize and plan will ensure success in this position. WHAT YOU WILL BE DOING You will assist the project management team with tasks such as negotiating and purchasing materials, maintaining documents, and acting as a point of contact with owners, architects, and engineers. Responsibilities: * Create Submittals and RFI's. * Coordinate projects from start to finish. * Assist with estimating. * Project setup & closeout. * support field operations. * maintain detailed job costs. * Work professionally with owners and engineers. * Assist in scheduling projects and crews. WHAT WE ARE LOOKING FOR The ideal candidate will have a degree in civil engineering, construction management, or another related field and is willing to travel and work the days and hours required to ensure the project's success. This position is perfect for someone seeking entry-level project management experience with an industry leader. LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. * Health, Dental, Vision, and Life Insurance. * Health Savings Account (HSA) / Flexible Spending Account (FSA). * Long-term Disability, Wellness Program & Employee Assistance Plans. * Holidays and PTO CONTACT US If you are interested in this Project Engineer position in Location then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com. If you have questions about the position or would like more information, please contact RecruiterName - Recruiter at DirectLine or by email. Garney Construction and its subsidiaries are committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Garney Construction is a background screening, drug-free workplace. Agency Disclaimer: All vendors must have a signed Garney Construction Agreement, authorized by the Executive Team, to receive payment for any placement. Verbal or written commitments made by anyone other than a member of the Executive Team will not be considered binding. Any unsolicited resumes sent to Garney Construction or submitted to employees outside of the Recruiting Team will be deemed the property of Garney Construction. In such cases, Garney Construction will not be obligated to pay any placement fees. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Sarasota Nearest Secondary Market: Tampa

Travel: Up to 25% Number of Openings: 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. Summary The Project Engineer supports field activities and spends a majority of time working with the Project Manager supporting project administration on multiple small projects, or one medium to large-size projects. Activities include managing the job transition process; and supporting the management of cost and schedule, constructability, technical evaluations, quality, safety, work planning, procurement, contract management, regulatory compliance, etc. Roles and Responsibilities The Project Engineer will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. * Generates and obtains approvals of monthly billing and earned values * Develops and manages the project schedule on small or mid-sized projects * Analyzes targets and goals, job cost summaries, and other reports * Alerts the Superintendent and Project Manager of project impact relating to resource management, crew make-up/size, etc. * Generates and obtains approval of the initial budget and subsequent updates, and reviews weekly job cost summaries and advises the Project Manager * Generates estimates of change orders and may interface with pre-construction on original bids * Collaborates with pre-construction and the project team to manage the job transition process, communicate project requirements, and develop the initial procurement plans, budgets, etc. * Generates material quantity take-offs, scoping documents, terms and conditions, delivery, etc. as applicable to support the procurement process * Generates requests for proposal(s), solicits and reviews quotations, and recommends a procurement decision to Project Manager * Prepares field purchase orders for standard purchase packages, and generates and obtains approval of Major Purchase Orders * Gathers and roughs-in monthly financial reports, and participates in the project financial reviews * Works with the Project Manager to approve and code project invoices * Generates and obtains approval of technical records such as constructability reports, RFI's, inspection records, work packages and deviation reports * Coordinates with the Superintendent, Field Project Engineer, and Line and Grade to generate required as-built records * Manages work package closure, punch lists, and project turnover process and approves pre- and post-pour checklists * Collects necessary documentation to identify and determine impact of potential contract changes, disputes, and claims * Leads LEAN/SQP committee and identifies improvement opportunities * Ensures all subcontractors are in compliance with terms of subcontracts, generates, and obtains approval on impact notices as needed * Reviews and confirms reports documenting compliance (Company and subcontractors) with prevailing wage, workforce utilization, MBE/SBE participation, etc., and advises the Project Manager of issues * Interfaces with Safety and Risk Management in establishing clinics, managing first report of injuries, and assisting with co-worker case management * Follows Company Recruitment and Hiring Guidelines * May conduct new-hire orientation and process E-Verify (must be certified) * May coordinate tracking and completion of training requirements with project management Requirements * Bachelor's degree from an accredited college or university and 2 years' of experience or 6 years' of construction related experience and/or training; or equivalent combination of education and experience * Proficiency in Microsoft software programs such as Word, Excel, and PowerPoint The following competencies are needed to successfully perform this job: * Ability to read, analyze, and interpret general business documents, technical procedures, and government regulations * Ability to write reports, business correspondence, and procedures * Ability to communicate well with all levels of workers involved with the project * Ability to apply concepts such as fractions, percentages, ratios, proportions, geometry, and trigonometry to practical situations * Ability to analyze and compute mathematical differences from all stages of drawings from conceptual to final drawings including development of shop drawings Ability to understand Cost Accounting * Basic understanding of construction software such as Primavera, Timberline, Vista and the like * Ability to understand, customize and modify spreadsheets * Ability to direct work and evaluate strengths and weaknesses of co-workers * Ability to work in a team environment * Ability to define problems, collect information, establish facts, and draw valid conclusions * Ability to develop construction schedule via the critical path method * Ability to understand contracts, specifications, drawings, and scope of work * Ability to be proactive in maximizing our return on investment at all time At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR. Nearest Major Market: Fort Myers Nearest Secondary Market: Cape Coral

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military