Engineer jobs in Clarksville, TN - 79 jobs

Please review the information below, if you are interested click apply and complete all of the required tasks. If you run into any issues while trying to apply, please call our Human Resources Department at **************. Denham-Blythe Company is a people-focused, design-build construction company committed to providing the best possible construction service in the industry. We exceed expectations in order to earn clients' trust for life. Founded in 1976, Denham-Blythe has completed over 10,000 projects to date, with 90% of our projects with repeat clients. The Field Engineer is responsible for assisting the Superintendent, quality control, all construction site layout, project documentation, and effectively communicating between all parties of the construction process. Project safety and quality shall be continuously observed and improved upon as necessary. Essential Functions * Assists in the planning, designing, monitoring and managing of projects and programs for substantial new construction, renovation and improvement projects. * Assists in serving as a technical consultant concerning facilities planning, construction and maintenance for different categories of facilities. * Utilizes program planning and budgeting cycles, financial control and budget systems to accomplish programming, determine resources and perform long-range planning. * Reviews consultant-prepared design drawings, prepares technical specifications, and reviews engineering plans for compliance with numerous regulatory acts. * Assists in the evaluation of contract bids, makes recommendations to higher-level engineers regarding feasibility studies, and assists in the management of large-scale construction projects. * Uses construction inspection report data to prepare payment estimates as a recommendation for payment. * Performs site layout tasks through surveying methods and practices. * Provides and maintains vertical and horizontal survey control points using levels, total stations, etc. * Assists Superintendent in completing daily reports and recordkeeping. * Assists in the preparation of final as-built documents. * Performs quality control procedures to ensure project is in accordance with all plans and specifications. * Communicates items and issues in a clear manner to design personal and project management. * Assists in a variety of basic construction tasks at the job site related to general construction. * Other duties as assigned. Skills * Ability to read construction drawings and documents * Proficient in geometrical and mathematical calculations * Knowledge to perform layout and surveying * Good communicate skills both in writing and orally * Self-motivating and responsible * Ability to work as an effective member in a team environment * Must practice effective and clear recordkeeping practices Physical Demands The position lifts heavy objects, walks and stands for long periods of time and performs strenuous physical labor under adverse field conditions. The employee lifts, pushes, pulls or carries objects; uses abdominal and lower back muscles to provide support over time without fatigue; and effectively jumps, sprints or throws objects. The position requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination. The position requires the ability to quickly move arms and legs. Education and Experience * Bachelor's degree in Civil Engineering or Construction Management. Other Requirements * Must obtain level I ACI certification and Engineer in Training certification * Must be willing to submit to a Drug Screen and Background Check * Must be eligible for work in the United States #LI-DNI Denham-Blythe Company, Inc. is an Equal Opportunity Employer/Minorities/Females/Veterans/Disabled

Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is your trusted partner providing single-sourced custom solutions for complex infrastructure development. With more than 500 team members across the Southern United States, TTL provides a wide range of services, including civil engineering; transportation design and CEI; geotechnical engineering; environmental consulting; construction materials engineering and testing; and surveying, GIS, and mapping. At TTL, we are driven to serve our clients, driven to serve our communities, and driven to serve our people. TTL not only provides a great work/life balance, but we provide excellent employee benefits such as a robust health & dental plan, vision, 401(k), flexible spending accounts, and generous paid time off (PTO) accrual. For more information, please go to *************** Build your legacy at TTL Civil Project Engineer - Clarksville, TN TTL is seeking a Civil Design Project Engineer to join our Clarksville office. In this role, you will play a critical part on our team through design and project level management. This role performs a wide variety of industrial, commercial, municipal, and residential engineering tasks, including developing/analyzing alternative solutions; overseeing staff, and leading design projects. The individual must be able to understand and apply state and local design criteria to all above design sectors. Communication skills for coordination with clients, consultants, government agencies, and project staff will be required. Key elements of work will include: Represent TTL in front of existing and potential clients. Manage project scopes of work, schedules, and budgets for a variety of projects. Provide engineering expertise on projects. Developing plans, specifications and cost estimates. Reviewing and directing the work of others. Documenting the design process and communications. Requirements: Bachelor's degree in civil engineering 4 to 6+ years of experience in engineering services with progressive responsibilities including commercial, residential, and general land development engineering, and project delivery. Tennessee P.E. or the ability to obtain one within 6 months Working experience in use of AutoCAD / Civil 3D Technical and proposal writing skills. Effective communication skills. Desired qualifications: Strong technical and proposal writing skills. Ability to articulate ideas and concepts. Effective communication and public presentation skills. Engaged in the professional engineering community. Desire and ability to work in a collaborative work environment. Self-initiative, a sense of urgency, and a strong desire to work as a team to grow a small office. Desire and ability to mentor less-experienced engineers and support staff. Job Type: Full-time This position is subject to a pre-employment drug and motor vehicle record check TTL is an EEO/AAP employer

Job Description Required Qualifications: Must have a BS in engineering or 5 years of related experience. Tooling experience required. Excellent English communication skills both oral and written. Excellent organizational skills with dedication to quality. Knowledge in computer software for Windows, Auto-CAD or CAD equivalent Knowledge of IATF16949 and APQP processes Responsibilities: Preparation of "tooling method plan" packages for quotation of new business proposals on an assigned project. Provides Tool follow-up for new programs. Works closely with manufacturing, quality, & production tooling group to ensure die build will meet the plant's specific needs. Maintains tooling progress with vendors to make sure die delivery is on-time & with-in budget. Receive, review and disseminate supplier quotation packages. Basic knowledge of materials and specifications for assigned project. Knowledge of assigned manufacturing facilities capabilities and limitations. Work closely with product design and manufacturing to support DFM&A concerns including GD&T at both the assembly and detail levels. Maintain up-to-date: Quote support documentation. Current die method plans. Manufacturing concern issues Travel to Martinrea facilities and integrators to support tooling build, buy off and aid in the integration at the manufacturing facility up to and through program launch. Execute Material Reduction Initiatives. Responsible for development of press set-up documents. Responsible for working with EHS to ensure all safety protocols are being met/followed. Competency Level 3 understanding of all advanced processes and interactions as determined by the leadership team.

Veraxx Engineering Corporation, a By Light Company is an engineering services company supplying modeling, simulation, and training solutions. Services include hardware, software, and system engineering, requirements assessments, system development, integration, testing, documentation, and customer support services. Veraxx has a high level of expertise in flight simulation hardware and software development, as well as computer architecture, tactical environments, interoperability (HLA/DIS), avionics systems, graphics and real-time embedded systems. Candidate will have the opportunity to work on a variety of flight simulators and develop/integrate software in areas such as avionics, tactical environments, interfaces to audio, visual, motion, and I/O systems, and Instructor Operator Stations (IOS). Software development is primarily done in the Linux and Windows operating systems using a variety of languages (C/C++, Ada, FORTRAN, C#). Position Overview Software Engineers at Veraxx are junior level S/W developers typically responsible for the development of basic S/W applications in support of projects. Engineers take direction from Lead S/W engineers to develop S/W throughout all phases of a project including requirements analysis, design, development and test. S/W Engineers are able to complete task such as developing a S/W interface to an external system or writing a software simulation of an aircraft system with support from a S/W Lead. Responsibilities Support S/W development activities as tasked by S/W lead. Design S/W for components within a system such as S/W interfaces, components of larger S/W systems or models of aircraft components. Prepare S/W documentation and input for design reviews. Ability to work in teams and take direction from S/W leads and complete tasks in timely manner Required Experience/Qualifications BS Engineering or Computer Science and Exposure to C/C++ S/W language Proficient in Windows or UNIX/Linux Software or Engineering Concepts & Processes Preferred Experience/Qualifications Knowledge of object-oriented design concepts Knowledge of flight simulation Knowledge of Visual Studio IDE, GCC compilers / Makefiles Knowledge of military aircraft systems and avionics a plus. Knowledge of networking Special Requirements/Security Clearance Must have or be able to obtain a Secret DOD clearance

Job Title: Manufacturing Engineer Company: JTEKT Column Systems North America Job Type: Full-Time About Us: JTEKT Column Systems North America is a dynamic and innovative Tier 1/Tier 2 automotive supplier, heavy truck, off-road/utility and manufacturer of steering columns and related systems. We pride ourselves on fostering a collaborative and forward-thinking work environment that encourages creativity and professional growth. As we continue to expand our product portfolio, we are seeking a highly skilled and motivated Manufacturing Engineer to join our team. The Benefits: We know how important your health, wellbeing, and financial strength is to you. JCSNA supports all aspects of the individual - self, health, wealth and community. We provide affordable benefits for you and your family members. Our benefits include: Medical, Dental, Vision, Virtual Medical Services Bonuses and Company Paid Medical Insurance 401(k) Retirement Plan + company match Company paid life insurance and STD Vacation time, plus 12 company paid holidays Tuition Reimbursement Employee Assistance Program (EAP) Plus more! 1 REPORTING RELATIONSHIP Reports to the Manufacturing Engineering Supervisor. 2 PURPOSE 2.1 Function 2.1.1 To manage or assist in managing engineering projects inclusive of building layout, tool and capital acquisition, machine modification or design, and to resolve manufacturing or quality problems; 2.1.2 Assist in product development or design changes. 2.2 Authority 2.2.1 At the direction of the Manufacturing Engineering Manager, purchase tools, and capital equipment; 2.2.2 Coordinate machine and tooling modifications; 2.2.3 Change plant layout for continuous improvement; 2.2.4 Recommend changes to product design for cost reduction or quality improvement projects; 2.2.5 Support and direct manufacturing, quality, and engineering teams from the engineering perspective. 3 DUTIES AND RESPONSIBILITIES 3.1 Support and develop countermeasures for safety related issues through safety team; 3.2 Develop specifications and purchase new tooling and manufacturing equipment; 3.3 Make changes to plant layout. Coordinate movement of machines; 3.4 Assist in the day-to-day resolution of problems arising on the production floor. These may be either machine problems or quality problems; 3.5 Coordinate with outside tool shops/vendors in the purchase or modification of tooling and equipment; 3.6 Expedite late tooling and equipment, maintain timeline; 3.7 Prepare reports daily/weekly/monthly as required; 3.8 Document and communicate activities across the organization as required; 3.9 Request and self-assign work orders to communicate and document machine activities; 3.10 Lead problem solving and cost reduction groups with technical and hourly associates; 3.11 Maintains Bill of Materials, routings (labor times) and cost updates; 3.12 Establish and maintains Operator, Poka-yoke, PM, etc. instructions; 3.13 Develop material handling systems and maintain in accordance with good ergonomic practices; 3.14 Process validation/tool tryout; 3.15 Participate in APQP activities as assigned (PFMEA, Control Plans, Flow Charts, QFD, etc.); 3.16 Complete and/or lead ECO activities; 3.17 Complete Corrective Action Reports as required; 3.18 Maintain 5S of office, workspace, and storage areas; 3.19 Support scrap reduction activities; 3.20 Actively participate in Morning and Evening market activities and lead and report out downtime portion of activities; 3.21 Support Company's perspective and direction with customer issues; 3.22 Cost avoidance projects in support of Engineering rationalization; 3.23 Support lean ergonomic activities; 3.24 Other duties as assigned. 3.25 Classes and other responsibilities: 3.25.1 Molding 3.251.1Molding Engineer must have relevant working knowledge of injection molding. As well as being capable of leading the molding department, strategic planning, insourcing, establishing tool maintenance and PM's, dryer knowledge, etc. This position will have ultimate ownership of all molding activities in the plant. 3.25.2 Tooling Facilitator / CNC 3.25.2.1Tooling Engineer is specifically responsible for supporting our tool room activities and coordinating tooling personnel. Supervision experience in a tooling environment is a must along with cost estimating, materials and processes selection, tooling management, equipment acquisition, etc. This position also performs primary support of all CNC activities in the plant and makes decisions on selection of best cost machining tooling and processes. 3.25.3 Welding 3.25.3.1Welding Engineer must have relevant working knowledge of Mig and Tig welding. They must be capable of giving direction to weld technicians, training, selection and cost justification of equipment, and have overall ownership of all welding activities in the plant. They must also be instrumental in determining proper PM's and maintenance of welding equipment. 4 MEASUREMENTS/COMPETENCIES 4.1 Rationalization targets; 4.2 Performance of assigned production lines; 4.3 Capability of new tooling or equipment; 4.4 Plant efficiency and utilization; 4.5 Ability to solve day-to-day problems; 4.6 Ability to manage projects; 4.7 Timeliness of reporting; 4.8 Customer satisfaction; 4.9 Other measurements as defined. 5 SUPERVISOR RESPONSIBILITIES This position has no supervisory responsibilities. 6 WORK ENVIRONMENT This job operates in a professional environment, as well as a manufacturing environment. This role routinely uses standard office equipment. This role also is occasionally exposed to moving mechanical parts and vibration. The noise level in the work environment is usually moderate. 7 QUALIFICATIONS 7.1 High school diploma or equivalent. 7.2 BS in engineering or equivalent work experience, with MS degree preferred. 7.3 Minimum 5 years' experience in metal removal, CNC programming, welding, metal forming, or assembly preferred. 7.4 Results-oriented, with leadership abilities. 7.5 Working knowledge of GD&T, work cells, single piece flow and J.I.T. 7.6 Must have excellent problem-solving abilities. 7.7 Excellent communication skills. 7.8 Draftsight/SolidWorks CAD experience a plus. 7.9 Ability to take project from design through tooling in to a repetitive manufacturing environment. All tasks including specifying and ordering tooling and equipment, machine installation, prototype handling, all container planning, quantity and placement of WIP, operator training, process control plans, budgeting, etc. 8 PHYSICAL DEMANDS 8.1 The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. 8.2 This position requires the incumbent to stand, climb or balance, stoop, kneel, crouch, or crawl occasionally and regularly requires walking, sitting, talking, and using hands to finger, handle or feel. The employee may occasionally lift, unassisted, up to 25 pounds. The employee will be required to use a computer for extended periods of time and talk on the phone. Specific vision abilities required by this job are close, distance, color and peripheral vision, depth perception and the ability to adjust focus. Requirements 9 POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position. Typical days and hours of work are Monday through Friday. This position requires extended hours and possible weekend work. 10 TRAVEL Local travel to various worksites is required. 11 DISCLAIMER Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. 12 AAP/EEO STATEMENT It is our policy to provide equal opportunity to all qualified individuals without regard to their race, color, religion, national origin, age, or sex in all personnel actions including recruitment, evaluation, selection, promotion, compensation, training, and termination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

Job Description Minimum Qualifications: Bachelor's Degree in Engineering or two years experience Ability to work with contractors on equipment installations and building expansions Follow and implement TS 16949 Quality Standards Experienced in cross-cultural work environment Ability to manage project, schedule and cost Machine and process trouble shooting Skilled in AutoCAD or other drafting software Knowledge of Microsoft Office Suite Knowledge of Toyota Production System Responsibilities: Item Description 1. Develop and / or maintain documented processes for new or existing production parts and assembly line process equipment. 2. Support pre-production trial activities by tracking and reporting data acquired from the trials and develop countermeasures for problem areas uncovered during the trials. 3. Take countermeasure for production equipment, tools and process concerning scrap, labor or customer issue improvements. 4. Manage equipment installations (mechanically and electronically); work with contractors to establish a schedule 5. Support new production launches for sample submissions 6. Support the production floor by helping address daily problems 7. Manage project schedules as assigned 8. Perform other duties as assigned

About ITS: Do you have the CHOPS? IT Solutions lives its values: Client Success is Our Success, Hungry for the Journey, Ownership Thinking, Passionate Problem Solving, and Surrender the Ego. If your values align, we want you to be a part of a fast-growing Managed Service Provider specializing in providing high-end technology solutions to small and mid-market businesses. IT Solutions is a nationally recognized leader in the IT space, with over 25 years of experience and thousands of satisfied clients. Join and grow with us, as we continue to innovate new ways to help businesses Experience Excellence. Job Summary: The Engineer, Managed Services is part of the Managed Services team responsible for supporting multiple clients and handling inbound and escalated inquiries on the Service Desk. The ideal candidate is a dedicated, relentless problem solver who applies logic and an instinctive approach to resolving technical issues. At IT Solutions, most of our clients rely on us as their sole technological resource. This person should enjoy learning new technologies on the fly while solving diverse technical challenges. The candidate should understand the value of best practices and have the foresight to thoroughly consider all potential outcomes before making impactful changes. The ability to manage the stress of client-down situations is an absolute must, and it is paramount to always provide excellent customer service. Responsibilities: Manage service tickets assigned to your personal and team queue and respond in agreed-upon timeframe. Provide superior service to customers and clients with limited supervision consistently. Provides remote hardware/software support, documentation, support logs and other related information throughout triage process. Act as internal escalation point for other Technicians to engage for technical assistance or process guidance and provide guidance to teammates on operational processes, troubleshooting or customer service. Responsible for the management of network, datacenter, security, and voice technologies. This includes but is not limited to Cisco, Sonicwall, Palo Alto, Juniper, F5, HP, Aruba, VMWare, Hyper-V, NetApp and other technologies. Analyzes and troubleshoots the logs and tracks the nature and resolution of problems and can perform all levels of routing incident analysis. Uses monitoring tools to investigate potential issues or respond to monitoring events, this can include but not be limited to Kaseya VSA, Connectwise Automate, LogicMonitor, Nagios, etc. Assists in monitoring and maintaining network hardware and software; analyzes and troubleshoots the logs and tracks the nature and resolution of problems and can perform all levels of routing incident analysis. Interacts with telecommunication, hardware and software vendors and operates on the customers' behalf to drive resolution of issues while providing regular progress updates to any incident stakeholders. Interact and work directly with multiple advanced technician groups and vendors to escalate technical issues, provide client updates, and drive incidents to resolution often collaborating between more than one group at a time. Work regularly with internal service and project coordinators who assign tickets to the Service DeskTeam. Produce detailed service reports regularly and communicate updates or changes internally and to the clients. Participate in a week-long on-call rotation a few times per year. Travel onsite to client offices to provide services. Days not spent traveling will be worked onsite at IT Solutions in Brentwood, TN or at times working from home. Knowledge, Skills, and Abilities: Confident and comfortable with client facing activity. Strong oral and written communication skills Communicate effectively with internal team members, customers, clients, and stakeholders. Maintains the ability to stay organized and be detail oriented. Demonstrates a passion for solving problems or helping others and take the initiative in driving continuous improvement/execution excellence. Exceptional organizational skills, including the ability to self-manage and multi-task effectively and accurately in a fast-paced and dynamic environment. Understanding of all Microsoft 365 offerings, as well as a basic understanding of Active Directory. Ability to lift at least 50 pounds and be comfortable with climbing up step ladders. Experience: Bachelor's Degree, or equivalent level of experience, in an engineering, business, or IT-related field preferred 2+ years' work experience as a Network Administrator installing, configuring, maintaining, and troubleshooting network, data center and security technologies. 3 years in a helpdesk role, triaging reported issues and incidents by customers. Experience managing or troubleshooting all Windows desktop and Windows Server (2012-Current) versions. Experience managing or troubleshooting with Office 365 Exchange online and Microsoft Exchange 2013-Current. Experience with any of the following firewalls and remote access VPNs: Cisco AnyConnect, Meraki, Sonicwall, Fortinet, etc. Experience with a ticketing system, such as ConnectWise Manage Experience supporting virtual desktop environments: Multi-Server Remote Desktop Server farm w/ Secure Gateway is prefer Certificates, Licenses, Registrations: CompTIA A+, Microsoft Windows, Apple mac OS certification, Cisco Certifications not required but would be a plus ITS offers a full benefits package, including: Rich Medical and prescription plans Dental & Vision Paid Holidays and Flexible Paid Time Off 401K/401K Roth with Safe Harbor matching Stock Appreciation Rights Company-paid life insurance, long-term and short-term disability insurance Company-paid mental health support & financial wellness services FSA for medical and dependent care HSA option with compatible medical plan Company-paid training, materials, and exams Performance-based bonuses IT Solutions is an equal employment opportunity employer that provides opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

360 Privacy protects high-level individuals PII data online helping individuals and businesses regain control of their digital footprint. Our platform automates data removal, monitors exposure, and provides visibility into where and how personal information is being shared. Were a mission-driven team of engineers, builders, and operators focused on privacy, security, and user trust. About the Role Were looking for a Staff Software Engineer to help shape, scale, and evolve the automation engine at the core of our platform. This role sits on our Automation team and plays a pivotal part in designing agentic workflows, orchestrating complex distributed systems, and driving the technical direction of the automation stack. Youll architect event-driven systems, build high-quality automation pipelines, and expand our scraper-based workflows all while mentoring engineers and raising the technical bar across the team. This is a deeply technical Staff-level position that requires strong ownership, architectural thinking, and hands-on coding excellence in Python. What Youll Do Take ownership of technical implementation and help define the long-term architectural direction of our automation platform. Employ agentic workflows to design, implement, and scale highly reliable automations. Build and maintain a resilient, observable, event-driven system that powers our automation engine. Develop workflow orchestration patterns and contribute to system-wide best practices. Mentor engineers, provide technical guidance, and help elevate peers across the Automation team. Collaborate cross-functionally with SOC, Core, and Integrations to expand and refine automation capabilities. Basic Requirements Expert-level proficiency with Python and hands-on experience working in production-grade systems. Strong communication and mentoring skills with a demonstrated ability to raise team capability. Experience orchestrating workflows using modern orchestration tools or frameworks. Deep understanding of event-driven system design and distributed architectures. Experience working with public cloud providers (AWS, GCP, or Azure). Preferred Qualifications Experience working with agentic workflows or large-scale automation frameworks. AWS experience Experience with Prefect or similar orchestration tools (Airflow, Dagster, Temporal). Kubernetes experience or familiarity with containerized deployments. Experience using AI tooling to augment developer workflows. Background in building scrapers at scale. What Makes You a Great Fit Low ego and a collaborative mindset. Strong attention to detail and craftsmanship. Curiosity and willingness to learn new tools and frameworks. A generous approach to sharing knowledge and mentoring others. A strong sense of responsibility when working with sensitive client data. Additional Details On-Call: Yes approximately every 68 weeks. Travel: If remote, quarterly travel to Nashville for onsite collaboration. #nashville #hybrid #LI-MH1 #automations #engineering

AG&E is an international structural engineering firm headquartered in Dallas, TX. Founded in 2004, AG&E has 8 offices across the US and international offices in India and Brazil. We are searching for a Structural Project Engineer to join our team in Brentwood, TN. PROJECT ENGINEER POSITION SUMMARY Candidate must possess significant experience in the design and documentation of complex medium to large building structures for commercial, institutional, mission critical, educational, aviation, or healthcare projects. The position requires the management of design team members and working with other senior engineers (Project Manager, Senior Project Managers, Associate Principals and Principals) in the delivery of projects including delivering required project documentation and calculations. Supervisory responsibilities will vary from project to project. The position will have direct interaction with clients and has great potential for position advancement and continuing career development. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential functions include, but are not limited to, the following: Technical Perform work generally under the direction of the licensed professional engineer who is stamping the project and in concert with senior engineers Manage other design professionals as assigned Perform structural analysis and design through hand calculations or computer modeling, as directed Perform structural detailing with assistance of senior engineers as need Responsible for all technical aspects of assigned tasks and projects Assists team members and senior engineers in development or oversight of following as directed: Selection of project materials and structural configurations Preparing general notes and selection typical details for projects Preparing structural specifications from Master Specifications Coordinating structural design with architectural and other engineering disciplines Delivering project documentation and calculations on schedule and within budget Provide construction contract administration services including answering RFI's, reviewing shop drawings and submittals as directed Perform site observations and prepares written reports of observations as directed Author reports of diagnostic investigations and other studies as directed Support other senior engineers on larger projects Continuously review work and processes to improve efficiency Conduct peer reviews of other projects Seals own work and work of others under direct supervision as requested by senior engineers Develop and present content for internal technical training Participate in company committees for development of processes and maintaining standards Continuously review work and processes to improve efficiency Work on multiple projects simultaneously Supervisory Assist with creating project work plan including tasks with budgeted time for each task and assists in managing team workload Assist in planning and leading structural design work sessions, both internal and external Assist in managing and directing design team members to a successful project completion Assist in coordinating tasks for design team and reviews work for acceptance Assist leadership in staff performance evaluations as requested Client Liaison Attends client meetings as requested Documents and reports meeting discussions Business Development Engage counterparts with external project contacts and develops and grows networking relationships Attend networking events, open houses, and industry events Assist in developing work plans for project pursuits Participate in project pursuit interviews, as requested MINIMUM QUALIFICATIONS (KNOWLEDGE, SKILLS, AND ABILITIES) Educational, Experience, and Licensing Requirements BS in Architectural or Civil Engineering (with structural emphasis) from an EAC/ABET accredited program, required MS in Architectural or Civil Engineering (with structural emphasis) from an EAC/ABET accredited program, preferred Minimum of six (6) years of experience (may be reduced with MS degree and/or SE license) Must have been conferred a PE license in state of residence (structural designation) Successful completion of the NCEES Structural Engineering exam (16 hours) preferred Expert in Bentley RAM Structural System or Tekla Structural Designer (TSD) and related program modules Autodesk Revit and BIM 360 Skills Must have strong working knowledge of applicable building and reference codes Must possess working knowledge of Microsoft Office Suite of programs Must have experience working with concrete, post-tensioned concrete, steel, masonry, and wood Demonstrates a sound working knowledge of current role and the impact the role has on other business functions with the organization Able to identify and resolve potential problems by timely gathering and analyzing information Displays the ability to follow detailed procedures to ensure accuracy of work Effectively communicates in a timely and clear manner to internal and external stakeholders Proactively solve problems without immediately looking for outside help Demonstrates strong interpersonal relationship skills Inclination to be a team player who shares key information with others involved in a project and with colleagues Continuously learning and improving skills and stays current on trends within our industry Displays ability to set high standards and demonstrate excellence, ensuring quality in every aspect of work performed Takes personal responsibility and ownership of one's work and self-initiates corrective action when needed Remains positive during times of adversity Demonstrates desire to mentor and share knowledge PHYSICAL DEMANDS AND WORK ENVIRONMENT Substantial movements (motion) of the wrist, hands, and/or fingers in a repetitive manner Manual dexterity sufficient to reach/handle items and work with the fingers Close vision (Clear vision at 20 inches or less); distance vision. (Clear vision at 20 feet or more); color vision (Ability to identify and distinguish colors) Continuous sitting, standing, walking, using stairs, hearing, talking, bending, crouching, and working closely with others Exerting up to 50 pounds (up to 100 pounds via dolly) of force occasionally to lift, carry, pull, or move objects Travel is required to project job sites and to the Companies various offices, as needed This position may require occasionally air and over-the-road travel. Including attending early morning or evening events outside of 8-5 hours When visiting projects must be in compliance with OSHA requirements BENEFITS OF JOINING AG&E Competitive Salary 2 Bonuses Per Year Dental, Vision, Short-Term Disability, and Long-Term Disability benefits covered at no cost to the employee 19 days of time off per year 401(k) Match

Innovative Staff Solutions is hiring for a Manufacturing Engineer for a client in a town close to Hopkinsville, KY. The Manufacturing Engineer creates and leads large new projects with multiple concepts and oversees multiple resources thru the successful completion of these projects. Includes developing and exercising leadership skills. This is a full time, direct hire position with competitive pay and benefits offering. Essential Duties and Responsibilities Knowledge of drafting standards and ability to read blueprints. Experienced with building 3D models and 2D prints with NX. Strong knowledge of error-proofing concepts. (Assembly) Strong knowledge of pneumatics and hydraulics. (Assembly) Advanced knowledge of basic production processes. Outstanding written and verbal communication skills. Sound knowledge of geometric dimensioning and tolerancing. Advanced fixture design. Advanced problem solving skills. Sound knowledge of material flow and work balancing. Ability to lead large-sized projects with multiple resources. Mentors and teaches newer Manufacturing Engineers. Working knowledge in SPC, Gauge R & R, and Capability. Able to create and maintain budgets and schedules for large projects. Researches and recommends new technology and processes. Advanced knowledge of Vertical and Horizontal CNC machining and programming. (Machining) Advanced knowledge of CMM programming. (Machining) Advanced knowledge of utilizing DataPage software. (Machining) Advanced knowledge of tool and coolant selection. (Machining) Basic design, development, and troubleshooting of control programs for equipment and automation systems; including but not limited to: Create PLC control programs for Allen Bradley PLC using Studio 5000 Create PLC and OI control programs for various small Omron, Unitronics and Red lion systems Education and Experience Requirements Minimum: Bachelor's Degree from a 4 year college or technical school and 5+ years Industrial Technology experience

Business Application Engineer Reports to: Director of Innovation and Director of Information Technology --------------------------------------------------------------------------------------------------------------------- We are Solutionaries. Parthenon Management Group is an association management company offering management services to professional and trade associations. We offer strategic guidance and bring creative solutions with a vision for the future. The Senior Business Application Engineer will support PMG's goals, values, and philosophy by exhibiting excellence, quality service, commitment, and accountability. As a member of the PMG team, you will be responsible for the maintenance and enhancement of software platforms for Parthenon Management Group and all its clients. PRIMARY DUTIES AND RESPONSIBILITIES include the following but are not limited to: Meet regularly with the Business Applications Team and business analysts to clarify priorities and requirements. Quickly translate user/business requirements into solid technical specifications. Design, develop, test, debug, and document application features and enhancements for the AMS platform. Build and maintain relational and dimensional data models; write efficient SQL and optimize queries. Implement integrations between the AMS and client websites or third-party systems. Participate in code reviews, both giving and receiving constructive feedback. Create and maintain technical documentation, deployment guides, and runbooks. Assist in developing and maintaining CI/CD pipelines and automated testing. Support deployment processes and post-deployment validation. Collaborate with senior engineers on solution architecture and technical approach. Troubleshoot and resolve production issues in collaboration with the team; participate in on-call rotation. Contribute to mobile app development and maintenance under the guidance of senior engineers. Support client onboarding from a technical/AMS perspective (data migration, configuration, etc.). Actively suggest improvements to existing systems and processes. Assist with database reporting, Excel data manipulation, and ad-hoc data tasks. Provide supplemental IT support and help onboard new team members (hardware, accounts). Perform other duties as assigned. ADDITIONAL DUTIES AND RESPONSIBILITIES include the following but are not limited to: Participate in the on-call rotation and help resolve incidents outside regular business hours (with senior backup when needed). Serve as a backup escalation point for complex support tickets or client issues. Assist in gathering requirements and preparing documentation for internal IT audits and compliance efforts (SOC 2, GDPR, etc.). Contribute ideas and effort estimates during annual budgeting and sprint planning cycles. Help create or update departmental runbooks, monitoring dashboards, and alerting rules. Occasionally present technical topics or demo completed work in team or company-wide meetings. Actively participate in knowledge-sharing sessions and brown-bag lunches. Provide constructive feedback during retrospectives to continuously improve team processes. Other duties as assigned. WORK ENVIRONMENT Position is in an office setting or work from home that involves everyday risks or discomforts requiring normal safety precautions. On occasion, the individual must be able to do moderately demanding physical activity such as handling and opening boxes weighing 35-40 pounds, standing, and walking extensively throughout the day. BENEFITS People come first at PMG. That goes for both our clients and our team members. We are known for our exceptional customer service and work ethics. Our clients are like family to us! But our real families are also a priority. From flexible work schedules, including work-from-home plans, paid volunteer days, profit sharing, and more, PMG takes great care of its team members. We offer: Medical, Vision, and Dental insurance Disability insurance 401(k) 2 Personal Days, 8 Paid Holidays, PTO Days 6 weeks parental leave Employee Development PMG offers one paid Give Back Day to employees where team members can volunteer at their favorite cause on PMG's dime. We are passionate about creating a workplace that promotes and values diversity. We serve associations who are global, multicultural, and diverse, and we want to reflect that inside our walls. More importantly, creating an environment where everyone, from any background, can do their best work is just the right thing to do. Requirements: PREFERRED EDUCATION, EXPERIENCE AND QUALIFICATIONS: Bachelor's Degree, Training program or experience as a full-stack developer with 4 years minimum experience, understand core components of software development. Six (6) years' working on an Agile/Scrum Team or some form of software development project management Ability and enthusiasm for quickly learning new technologies. Experience with the following technologies is required: JavaScript Frameworks, HTML, CSS, PHP (WordPress & Symfony & Composer), Linux (Apache, Nginx, PostGress, MySQL, Shell Scripting), Docker, and AWS (Lambda, EC2, SES, SQS, CloudFront) Experience with the following technologies is preferred but not required: Domain Name Services, TCP/IP Model, Authentication (X.509 Certificates, SAML, JWT), Windows System Administration, C# .NET, NextJS, Ionic React, WebSocket Pub/Sub, Test Driven Development, Experience Building REST or GraphQL Backends, Relational database queries and data model changes. Experience with eCommerce / Payment Card Industry Standards and Conference / Convention Planning and Management is a plus Ability to communicate and assist staff in the office with technology related issues. Ability to prioritize and manage multiple projects at one time. Creative Problem Solver. Creates an inclusive and dynamic culture.

Our client is a global manufacturer, with 12, 000 employees and operations across seven countries, produces residential and commercial water heaters, boilers, and water treatment products. As a stable category leader, the company fosters a culture of continuous improvement, emphasizing Lean and Six Sigma principles along with a strong commitment to safety and ergonomics. In this Manufacturing Engineer role, the focus is on driving process improvements, managing capital projects, and applying design-for-manufacturability (DFM) strategies to enhance throughput, quality, and cost efficiency within a high-volume industrial plant. Responsibilities: Apply ergonomic and safety standards across processes, equipment, and facilities Develop, evaluate, and improve manufacturing methods using data and analysis Assess new technologies/processes to lift efficiency, productivity, quality, and cost Build capital justifications for tooling, equipment, and savings initiatives Analyze labor/space/flow; design equipment and workspace layouts for max efficiency Serve on Product Development System (PDS) teams to ensure DFM, tooling, and equipment readiness for launches Partner with vendors on specifications; source equipment/materials; evaluate to quality standards Estimate cycle times, staffing, and costs to inform management decisions Collaborate with management/engineering on capacity, schedules, and constraints Implement Lean tools: continuous improvement, kaizen/blitzes, Kanban, line balancing, TPM, takt time Team with maintenance on troubleshooting, installations, and equipment setup Qualifications: Bachelor' s in Mechanical Engineering or related field 5+ years' related manufacturing engineering experience Hands-on with Six Sigma, Lean, and continuous-improvement methodologies Strong technical communication: reports, procedures, presentations to cross-functional groups Proficient in applied math and statistics (probability, statistical inference, geometry/trig; fractions/percentages/ratios) Demonstrated problem solving: define issues, collect data, establish facts, draw valid conclusions Ability to read/analyze technical procedures, standards, and regulations Compensation: Base salary to 105k/year Relocation Assistance available Comprehensive benefits: medical & dental insurance, company-paid life insurance, 401k retirement savings plan, short- & long-term disability, tuition assistance #INDALL

Job Description Manufacturing Engineer - Manufacturing - Base Salary to 105k/year - Ashland City, TN Our client is a global manufacturer, with 12,000 employees and operations across seven countries, produces residential and commercial water heaters, boilers, and water treatment products. As a stable category leader, the company fosters a culture of continuous improvement, emphasizing Lean and Six Sigma principles along with a strong commitment to safety and ergonomics. In this Manufacturing Engineer role, the focus is on driving process improvements, managing capital projects, and applying design-for-manufacturability (DFM) strategies to enhance throughput, quality, and cost efficiency within a high-volume industrial plant. Responsibilities: Apply ergonomic and safety standards across processes, equipment, and facilities Develop, evaluate, and improve manufacturing methods using data and analysis Assess new technologies/processes to lift efficiency, productivity, quality, and cost Build capital justifications for tooling, equipment, and savings initiatives Analyze labor/space/flow; design equipment and workspace layouts for max efficiency Serve on Product Development System (PDS) teams to ensure DFM, tooling, and equipment readiness for launches Partner with vendors on specifications; source equipment/materials; evaluate to quality standards Estimate cycle times, staffing, and costs to inform management decisions Collaborate with management/engineering on capacity, schedules, and constraints Implement Lean tools: continuous improvement, kaizen/blitzes, Kanban, line balancing, TPM, takt time Team with maintenance on troubleshooting, installations, and equipment setup Qualifications: Bachelor's in Mechanical Engineering or related field 5+ years' related manufacturing engineering experience Hands-on with Six Sigma, Lean, and continuous-improvement methodologies Strong technical communication: reports, procedures, presentations to cross-functional groups Proficient in applied math and statistics (probability, statistical inference, geometry/trig; fractions/percentages/ratios) Demonstrated problem solving: define issues, collect data, establish facts, draw valid conclusions Ability to read/analyze technical procedures, standards, and regulations Compensation: Base salary to 105k/year Relocation Assistance available Comprehensive benefits: medical & dental insurance, company-paid life insurance, 401k retirement savings plan, short- & long-term disability, tuition assistance #INDALL

We are currently seeking candidates to fill a Project Engineer Role. The Project Engineer is responsible for providing manufacturing with engineering support by installing new systems, maintaining and improving existing systems throughout Flexcon. What will you do in this role? Design components, systems and/or facilities utilizing a computerized drafting system. Work on assigned engineering requests; gather information and make recommendations; obtain quotes; supply specifications for equipment; obtain approval and purchase materials; schedule and supervise project installation; evaluate and monitor completed projects. Update procedures and instructions, as needed. Maintain appropriate files. Document project status in the computer system. Evaluate and review bids from prospective contractors. Issue contracts to contractors. Provide technical assistance to manufacturing personnel. Comply with federal and state regulations; enforce procedures, rules and regulations to maintain a safe and clean work environment. Other duties consistent with the general nature and focus of the position and/or the goals and objectives of the department may be assigned. What does it take to be successful in this role? 4 year Engineering Degree 3-5 Years web handling/converting background and/or industrial ventilation experience a plus 5+ years experience in a similar role What's in it for YOU? At Flexcon, we offer a comprehensive compensation and benefits package that includes base salary, healthcare coverage (medical, dental, and vision), life and disability insurance, 401(k) with company match, paid time off, wellness programs, and tuition assistance. Based on region, the expected salary range(s) for this position is $61,150 - $102,000. ​The posted salary range reflects a national pay scale and is intended to provide a general idea of compensation across different geographic regions. Actual compensation may vary depending on location, experience, and other job-related factors. We take regional market differences into consideration to ensure fair and competitive pay in each area. By applying to this job and providing your mobile number, you are agreeing to receive an initial text from Flexcon, which you will have the ability to opt out of upon receipt. Message and data rates may apply. Message frequency varies. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Job Description The Solution Engineer must have a strong desire to demonstrate their technical and/or sales skills, including the ability to solicit business requirements. As a key contributor with specific sales pursuit, the pre-sales specialist will drive the adoption of our solutions, bridging the gap between complex client challenges and innovative, value-driven technical solutions. Is good at multi-tasking in various phases of deal to post-deal. Key Responsibilities: Partner with account teams to qualify and shape opportunities from the first conversation through to deal closure. Assist in the creation of proposals and sales collateral. Deliver compelling demonstrations, proof-of-concepts, and walkthroughs of our platform capabilities to clients. Conduct product / solutions demonstrations and presentations to prospective clients with AI skills. Maintain up-to-date knowledge of industry trends and competitive products. Create and maintain technical collateral, playbooks, and reusable assets to scale pre-sales efforts. As Business Analyst requirements gathering with effective requirements to design documentation. Connect Experiences: Demonstrate through demos and rapid prototyping how connected experiences come to life with our Solutions. Qualification: 3-5 years of experience in presales, consulting or technology solution roles, ideally with AI, digital transformation or enterprise software. Knowledge of related applications, relational database and web technology. Demonstrate experience in requirements analysis, solution design and creation of compelling presentations and demonstrations. Excellent communication and presentation with documentation skills. Ability to work effectively both independently and as part of a team. Experience supporting large enterprise accounts with complex integrations and distributed operational models. Powered by JazzHR dWXcFnSKBw

Vybond is a global market leader in pressure-sensitive adhesive tapes, delivering innovative solutions to a variety of industrial and specialty markets. Headquarters in Franklin, KY, with facilities in Riverhead, NY, and Bristol, RI, Vybond Group, Inc. manufactures specialty foil, film, and duct tapes and adhesives. With over 1,500 specialty SKUs spanning 500+ product families, Vybond serves 1,500+ customers across the HVAC, building and construction, industrial, retail, medical, aerospace, automotive, and other specialty industries. The Product Development Engineer plays a critical role in developing and executing Vybond's strategic vision for new product growth, driving innovation across existing applications and emerging market opportunities. This position is central to delivering next-generation products that support long-term profitability and business expansion. As a member of the Product Development team, the engineer is responsible for leading the technical execution of development projects from initial research through to full-scale production. This includes managing key milestones, defining product and performance specifications, and ensuring alignment with project budgets and timelines. The role requires close collaboration with cross-functional teams including Customers, Sales, Commercial Development, Process Engineering, Product Management, Regulatory Affairs, and Manufacturing. PRIMARY FUNCTIONS: Follow established Design Control procedures for the development of new products and product variances. Design experiments, execute trials, develop and interpret data and perform application testing developing new products to meet customer and market demands. Run trials on the pilot and production lines using solvent, emulsion, hot melt, and rubber-based pressure sensitive adhesives and coatings. Implement product development projects consistent with corporate objectives; ensure that project objectives are met and completed on schedule. Source, analyze and utilize new raw materials for product innovation and cost reductions. Identify equipment and processing issues that affect processing, quality, and performance while working with cross-functional teams on problem resolution and implementation. Preparation of finished good tape samples, operation, and understanding of various test equipment/methods, including application testing and data analysis for evaluation and presentation of new tape designs. Implement technical documentation packages, including raw material specifications, product specifications, stability, and general technical data to support the introduction of new products. Knowledge of ASTM standards and PSTC methods to support product testing when required. Perform additional duties as assigned by the Product Development Manager. Qualifications POSITION REQUIREMENTS: BS Degree in Chemical Engineering, Polymer Science, Chemistry or related experience 5+ years Product Development experience Experience in Pressure Sensitive Adhesive Tapes, Adhesives or Release liners is highly desired Competence in the basic understanding of process control equipment and the interrelations of processing conditions versus final product performance Competence in FTIR, DSC, peel adhesion, tack and shear testing, and other analytical techniques desirable Entrepreneurial and continuous innovation mindset ADDITIONAL QUALIFICATIONS: General knowledge of chemistry, chemical compatibilities, safety protocols & experience working in a laboratory or pilot setting Project Management experience required (PMP is a plus) Knowledge in statistical methods and programs (SPC/DOE/MiniTab) Proficiency with MS office to record and report data in a professional manner Ability to travel as needed Excellent verbal and written communication skills Ability to prioritize, multi-task, be a proactive thinker, and results-oriented team player Strong organizational skills with proven ability to complete multiple tasks simultaneously Strong analytical and problem-solving skills are required for data-driven project management

Design and develop machine control systems and tooling to support new product development, product improvements, capacity expansions, and equipment rebuild projects. Focus areas will include but are not limited to: * Controls programming * CNC machining * Work cell automation * New process implementation Essential Functions: * Drives the engineering design process (concept, design, drawing creation, build, document), installation, PPAP, and long-term technical support of the manufacturing processes. This will include meeting quality, capability, cost and time targets. * Develops and implements capital or expense projects. This will include: * Researching new and established manufacturing technologies * Planning the capital and time needed to implement the technology * Writing CER (Capital Expenditure Request) proposals to be reviewed. Upon project approval, this engineer will be responsible for: * Procuring the necessary equipment. * Installing it in the manufacturing plant. * Meeting cost and time targets. * Participates in product and process design reviews. The position is responsible for helping to improve the quality of the product while lowering the cost to produce it. * Evaluate new and current product process and provide input regarding manufacturability and cost. * Support installation troubleshooting and PLC/Robotic/CNC programming on new or existing machines. * Assure that all applicable quality and safety standards are met for new and existing processes. * Travel as needed to other Brake & Wheel End facilities for process improvmenet/implementation as well as evaluation of potential suppliers. * Other duties as assigned. Education and Training: * Bachelor's degree in a related technical area is required (Mechanical or electrical engineering preferred). Minimum Qualifications * 2+ years experience in manufacturing engineering, 8+ preferred. * Professional experience in manufacturing engineering in an automated CNC environment is desirable. * Formal training in CNC machining is desirable. * Candidate must demonstrate an ability to read and understand mechanical drawings and GD&T. * 3D modeling experience is required. * Hands-on experience in tooling & fixturing methods is required. * Experience in procurement of manufacturing systems and equipment required. Physical Demands * Frequent sitting, work at a computer for extended periods of time * Must be willing to travel to Hendrickson manufacturing facilities on an as-needed basis * Must be able to work hands on with operations to validate designs & concepts. Environmental Conditions * Office setting & shop floor setting * Candidate will be working in and around industrial machinery. May be exposed to the following processes and the environmental conditions inherent with each: foundry, machining, metal surface treatment, welding. Behavioral Traits * Must be punctual, self-motivated, and ethical. * Strong communication and interpersonal skills. Must be able to work well within a team environment and collaborate with different functional groups * Strong organizational skills * Strong problem solving and deductive reasoning skills * This is not a comprehensive list of duties. Duties may change without notice in management's sole discretion. Hendrickson is an at-will employer, each employee is free to resign at any time, just as Hendrickson is free to terminate employment at any time without cause or notice. Hendrickson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Notes: Must have a degree Must be out of film converting. Our award-winning client is seeking an R & D Engineer to join their team. As a Product Development Engineer specializing in adhesive tapes, you will play a vital role in our innovation and product development initiatives. Adhering to established Design Control procedures, you will be responsible for developing new products and product variances. This dynamic role involves designing experiments, executing trials, and performing application testing to meet customer and market demands. Operating on pilot and production lines, you will work with various adhesive types, including solvent, emulsion, hot melt, and rubber-based pressure-sensitive adhesives and coatings. Responsibilities: Design Control Procedures: Follow established Design Control procedures for the development of new products and product variances. Experimentation and Trials: Design experiments, execute trials, develop and interpret data, and perform application testing to create new products aligned with customer and market demands. Pilot and Production Line Trials: Run trials on pilot and production lines using various adhesive types, including solvent, emulsion, hot melt, and rubber-based pressure-sensitive adhesives and coatings. Project Management: Implement product development projects consistent with corporate objectives, ensuring that project objectives are met and completed on schedule. Raw Material Sourcing: Source, analyze, and utilize new raw materials for product innovation and cost reductions. Issue Identification and Resolution: Identify equipment and processing issues affecting processing, quality, and performance. Collaborate with cross-functional teams on problem resolution and implementation. Tape Sample Preparation: Prepare finished tape samples, and operate various test equipment/methods, including application testing and data analysis for the evaluation and presentation of new tape designs. Technical Documentation: Implement technical documentation packages, including raw material specifications, product specifications, stability, and general technical data to support the introduction of new products. Standards and Testing: Know ASTM standards and PSTC methods to support product testing when required. Additional Duties: Perform additional duties as assigned by the Product Development Manager. Required Qualifications: Bachelor's degree in Chemical Engineering, Polymer Science, Chemistry, or related field. Three plus years of experience in pressure-sensitive adhesive tape, adhesive, or release liner design and manufacturing. Competence in the basic understanding of process control equipment and the interrelations of processing conditions versus final product performance. Competence in FTIR, DSC, peel adhesion, tack and shear testing, and other analytical techniques. Entrepreneurial and continuous innovation mindset.