Engineer jobs in Fort Myers, FL - 78 jobs

The Field Engineer gathers the necessary field information regarding aerial, buried or underground Outside Plant (OSP) telecommunications cable and associated facilities. The information provided by the Field Engineer will be utilized to facilitate the design of work orders to place new network cables, utility poles, hand holes, terminal cabinets, etc. or to rearrange/modify the existing network. (This is meant to be a guide. Duties may vary dependent upon management.) Essential Position Functions: • Take detailed measurements, notes and pictures of the proposed telecommunications network construction locations, cable routes, and equipment sites. • Travel to required work sites. • Obtain accurate distances and necessary field data using a measuring wheel, range finder, pole stick or other outside plant engineering tools. • Follow measuring guidelines set forth by the customer. • Adhere to safety guidelines set forth by TrueNet and customer. • Report data/notes to appropriate design team member and/or manager. • Maintain company vehicle (if provided) as directed by manager and/or safety team. • Attend onsite meetings as directed by TrueNet and/or customer. • Attend training sessions to maintain and build upon skill, knowledge and performance levels. • Other duties as assigned. Education and/or Experience: • High School Diploma or GED required. • Experience with and understanding of OSP construction techniques required. • Working knowledge of OSP infrastructure, equipment, easement, right-of-way and permit documents is preferred. • Working knowledge of OSP aerial, buried and UG Plant. • Ability to prioritize and complete assignments accurately and in a timely manner. • Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. • Intermediate proficiency with Microsoft Office suite (Word, Excel, Outlook) required. • Strong interpersonal, organizational, verbal and written communications skills. • Must be able to work alone, and with a team. • Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Frequent walking, standing, stooping, kneeling, crouching within the work area. • Lifting of up to 50 pounds up to one-third of the time. • Must be able to work and travel in various weather conditions. • Use of ladder and power tools required more than 50% of the time. • Ability to effectively communicate with employees, management, peers, et al. Work Environment: The work environment characteristics described here are representative of those of a field environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • This is a field position and requires 80% or more travel. • Most work is completed outdoors. • Must be able to work in loud, noise-filled environment out in the field. • The position requires working independently, as well as part of a team. • This position requires verbal contact with others daily. • Frequent use of a computer is necessary. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, gender expression, sexual orientation, national origin, genetics, disability, age or veteran status. TrueNet is an Equal Opportunity Employer of Minorities, Females, Individuals with Disabilities and Protected Veterans. California Consumer Privacy Act (CCPA), read here We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to sponsor visas for this position (H1B, etc.). TrueNet Communications is a national infrastructure engineering and specialty contractor serving the wireless, broadband, and telecommunications markets. We plan, design, build and support communications infrastructure for our clients across North America. Join our team of professionals where you can advance your career in a fast pace, GROWING industry! We offer competitive salaries, excellent benefits, 401k, paid time off and paid holidays.

Wharton-Smith, Inc. is currently seeking an experienced Field Engineer to work in the Water/Wastewater Division for the Fort Myers, FL office. The successful candidate will be responsible for successful completion of field tasks as assigned by the Project Superintendent and Craft Foreman. Responsibilities: Assist Foreman with structure layout Field purchase orders Engineering duties as assigned for assistance in planning construction. Maintain and update project logs and schedules. Identify need for Requests for Information (RFIs). Prepare, review and process shop drawings. Maintain as-built drawings. Collect and assemble O&M material. Perform subcontract scope analysis. Assist with purchasing and expediting. Document distribution. Meeting minutes and distribution. Scheduling. Requirements: Surveying/layout, technical writing Qualifications: Bachelor's degree in Civil Engineering, Mechanical Engineering, Construction Management, or other relevant degree. Excellent written and verbal communication skills.

Are you looking to join Florida's fastest growing mechanical contracting team? B&I Contractors, Inc., a proud four-time winner of the Great Place to Work certification, is seeking an experienced and dedicated Design Build System Engineer to join our dynamic and expanding team. The goal of the engineer is to promote B&I Contractors' services and solutions to support a "last look" with contract customers, "default spec" with consulting engineers, and "trusted advisor" with account owners. With assistance from the business development manager and others within the company, the Design Build System Engineer will ensure retention of assigned accounts and customers; will partner with other sales engineers and sales representatives from other departments to maximize profit generation from accounts through influence on specifications and project scopes. The Design Build System Engineer utilizes sales tools and tracking software to plan and document progress as well as increase business opportunity in accounts. Achieves quarterly quotas and annual sales goals. Why Choose B&I Contractors, Inc.? * Industry Leader: As Florida's fastest growing mechanical contractor, we specialize in large-scale commercial projects. * Continuous Development: Benefit from our NCCER-certified in-house and online training that equips you with the skills needed to advance in your career. * Comprehensive Benefits: Enjoy employer-paid health insurance, accrued vacation, and sick time, along with a wellness reimbursement program to support your overall well-being. * Retirement Benefits: We are a 100% employee-owned company with an ESOP. You can also participate in our 401(k) plan with company match and explore post-tax Roth IRA options to secure your financial future. * Established Legacy: Join a team of over 1000 employees contributing to our success since 1960, with a proven track record of excellence in mechanical contracting. Key Responsibilities * Provide Electrical design input and continuous estimating from schematic, design development, 50%, to 100% construction documents. * Attend design meetings with owners, architects, engineers, and construction manager. * Perform Electrical system review and economic analysis. * Travel requirements - Geographic requirements include Tampa to Marco Island. * Coordinate trade employees and/or other subcontractors. * Provide technical assistance, i.e., engineering, interpretation of drawings, recommendation of construction methods and equipment, etc., as required. * Conduct on site visits/inspections as required ascertaining installation in compliance with MEP design. * Act as liaison between MEP trades and general construction trades. * Provide field employees with the necessary support to allow the project to be completed expeditiously. * Works in a "plan and spec" environment utilizing the necessary skills to build relationships with clients in a competitive market. * Builds partnering relationships with assigned accounts to drive the penetration of the Electrical Systems. * Maintains frequent face-to-face contact with the customers who most directly influence purchasing decisions with the client corporation. Actively listens, probes and identifies concerns. * With assistance from the VP of Electrical Operations, addresses concerns and performance lapses immediately and understands the customer's business, speaking their language. Develops credibility, loyalty, trust and commitment. * Supports the goals of the company, performs take-offs and bids the full spectrum of the market with the full spectrum of B&I Contractors' services and equipment offerings. * With consulting engineers, drives specifications of the full spectrum of projects towards products and brands offered by B&I Contractors. * With assigned owner accounts, the sales engineer should actively drive a preference for B&I Contractors' all-inclusive services, expansive product offerings, wealth of experience, and knowledge of the market. * Keeps management informed of progress toward achieving goals and account statuses. Calls for assistance from manager to keep the sales process moving as needed. * Demonstrates technical knowledge by writing the specification or matching the proposal to the building specifications to provide value to the customer and favorably position B&I Contractors to competitively bid and win the project. * Under direction from the business development manager, qualifies and assesses potential customers, accounts, and market segments. Teams with colleagues on individual projects based on account assignments, and refers leads to other departments as the opportunity arises. * Develops relationships with internal support and administrative staff to ensure customer satisfaction and effectively and efficiently address issues. * Manages customer purchases orders in relation to original proposals/estimates and forwards documentation to the appropriate individual for processing. * Participates in professional organizations and attends industry trade shows to build relationships and increase knowledge of market offerings. * Perform other duties as assigned. Qualifications * Four year Bachelor's degree in Electrical Engineering. * Excellent working knowledge of NEC Standards, Florida Building Code (Mechanical & Energy). * EIT will be required within one year of employment. * Previous construction and/or engineering office related experience is not required, but preferred. * Proficient in Microsoft Word, Outlook & Excel. * Experience working with Trimble Accubid Anywhere electrical estimating software. * CAD experience with Revit is preferred. * Possess Strong communication, analytical and organizational skills. * Excellent trouble shooting and problem solving skills. * Prior related internships and/or summer experience are desired. * This position requires the ability to lift and carry materials weighing up to 50 pounds on a frequent basis. The employee must be able to perform tasks involving physical labor, including lifting, pushing, pulling, and carrying materials, tools, or equipment. Manual material handling must be performed in accordance with OSHA safety standards and company policies to minimize risk of injury. * Esta posición requiere la capacidad de levantar y transportar materiales de hasta 50 libras de manera frecuente. El empleado debe poder realizar tareas que involucren trabajo físico, incluyendo levantar, empujar, jalar y transportar materiales, herramientas o equipo. El manejo manual de materiales debe realizarse de acuerdo con los estándares de seguridad de OSHA y las políticas de la compañía para minimizar el riesgo de lesiones. Ready to grow your career with a respected, employee-owned leader in mechanical contracting? Apply now and be a part of something built to last. B&I Contractors is committed to maintaining a safe and productive work environment. We are a drug-free workplace.

Department: IS Information Technology Svcs Work Type: Full Time Shift: Shift 1/ to Minimum to Midpoint Pay Rate:$90,667.20 - $117,852.80 / Annual Lee Health is seeking a highly skilled Advanced Infrastructure Engineer with deep expertise in Microsoft enterprise infrastructure. This role is responsible for engineering, maintaining, and optimizing large-scale Windows Server environments supporting clinical, administrative, and operational workloads across a distributed healthcare system. This position requires advanced proficiency in Windows Server architecture, Active Directory services, virtualization (VMware), automation (PowerShell), and Azure/M365 ecosystems. The ideal candidate brings strong operational discipline, experience in complex multi-site environments, and the ability to engineer robust, secure, and scalable solutions. Core Technical Responsibilities * Architect, deploy, and support Windows Server systems across physical and virtual environments (2016/2019/2022). * Manage full lifecycle of OS builds, configuration baselines, patching, system performance, and capacity utilization. * Engineer and maintain enterprise Active Directory, including: * Domain Services * Group Policy (GPO design, auditing, troubleshooting) * Federation Services (ADFS) * Certificate Services (PKI architecture, renewal workflows, CA hierarchy) * Administer Azure AD / Entra ID, hybrid identity, conditional access, and security baselines. * Support and optimize Microsoft Exchange, M365, File/Print Services, IIS, and enterprise email archiving solutions. * Automate administrative processes using advanced PowerShell scripting, tooling, and orchestration patterns. * Troubleshoot complex infrastructure issues across server, storage, networking, identity, security, and virtualization layers. * Support VMware ESXi clusters, VM provisioning, resource tuning, templates, and host performance. * Contribute to infrastructure security hardening, incident response, and audit/compliance initiatives. * Participate in change, incident, and problem management using ITIL-aligned practices and ServiceNow workflows. * Provide Tier III engineering support for escalated operational issues. * Participate in a rotating on-call schedule to support 24/7 hospital operations. Technical Environment Experience in several of the following technologies is ideal: * Windows Server: 2016, 2019, 2022 * Identity & Access: AD DS, ADFS, GPO, PKI/Certificate Services * Cloud: Azure, M365, hybrid identity * Messaging: Exchange on-prem and Exchange Online * Virtualization: VMware ESXi * Automation: PowerShell (advanced), scripting frameworks, configuration tooling * Networking: DNS, DHCP, load balancing, firewall fundamentals * Storage/Backup: SAN/NAS platforms, enterprise backup strategies (Veeam, Rubrik, Commvault, etc.) * Security: Hardening standards, RBAC, MFA, conditional access, audit logging * Web & App Hosting: IIS, application pools, bindings, cert management * Database: Familiarity with MSSQL configuration and high-level administration Healthcare experience is a strong plus but not required; engineers from other highly regulated or large-scale environments will also excel. Education & Experience * Bachelors degree in Computer Science, Information Systems, Engineering, or related discipline OR equivalent relevant professional experience. * Minimum 4 years of progressively responsible infrastructure engineering experience in enterprise environments. Relevant Certifications Candidates holding advanced infrastructure, cloud, identity, or virtualization certifications appropriate to this level of engineering role are encouraged to apply (e.g., Microsoft, Azure, VMware, security, or equivalent engineering-track credentials). What Makes an Engineer Successful Here * Strong ownership of systems and willingness to go deep into root-cause analysis. * Ability to engineer hardened, production-ready solutions in a mission-critical environment. * Comfort supporting large multi-site or hybrid infrastructures. * Excellent documentation habits and adherence to repeatable processes. * Effective communication with peers, cross-functional teams, and technical leadership. * Desire to innovate, streamline, automate, and reduce technical debt. Why Engineering at Lee Health? * Complex, enterprise-scale environment powering high-impact clinical operations * Opportunities to shape modernization efforts in cloud, identity, automation, and virtualization * Remote flexibility for Florida residents * Not-for-profit, mission-driven stability with ongoing technology investment * Strong engineering community with opportunities for specialization and advancement

CPH is a multi-disciplined Engineering and Architectural design firm that ranks in the nation's Top 500 Design Firms by ENR Magazine. Are you an entry-level engineering professional or recent graduate with internship experience? This might be a fantastic position for you to advance your passion in the civil and/or environmental space! This is a great opportunity to join a dynamic and highly collaborative team. CPH has an opening in our Ft. Myers, Florida office location for the following position: * Project Engineer (EIT/EI) - Civil/Environmental What You'll Do: * -Primary Duties-- * Preparation of design plans, specifications, and reports for a variety of water/wastewater and stormwater projects which may include transmission, distribution, collection, treatment, storage, utility master planning, permitting and various engineering tasks. * Hydraulic modeling including stormwater pre/post and advanced treatment and storage design along with water and sewer pumping systems and hydraulic water distribution modeling. * Ability to successfully interact with various public and private clients and other jurisdictional agencies. * Performing assignments requiring application of standard techniques, procedures and criteria to carry out engineering tasks. Assignments are designed to further develop judgment and understanding of professional and ethical responsibilities. * Review of design plans and comparison to accepted municipal standards and details. * Preparing engineering related calculations and develop drawings and visual aids. * Working on a wide range of projects and tasks and assist with field research, data collection, data analysis, graphics, maps and data presentation, and report development. * Management of time and workload to stay on schedule and within budget. * Limited travel to assist with site investigations, construction observation and project transmittals. What You'll Need: * -Requirements-- * Bachelors or Master's Degree in Civil Engineering or Environmental focus. * E.I Certificate preferred or eligible and scheduled for FE exam. * Detail-oriented individual with strong technical and organizational skills * Proficiency in spreadsheets, word processing and standard office software. * Works well in multidisciplinary team environments and ability to meet deadlines. * Strong oral presentation and written communication skills. * Experience with AutoCAD, Civil3D, WaterCAD, ICPR and other modeling software is preferred. * Valid state-issued driver's license with a clean driving record. What We Offer: * -Compensation & Benefits-- * Dependent upon experience. * CPH offers Medical, Dental and Vision and Long-Term Disability with a quality insurance company. * Company Paid Life Insurance and Short-Term Disability. * 401K, Paid Personal Time Off, Paid Holidays, and Paid Parental Leave. CPH is an Equal Opportunity/Affirmative Action/Drug Free Work Environment Employer.

LEMOINE, a Great Place to Work-Certified company, is currently seeking a Recovery Project Engineer. The Recovery Project Engineer assists and supports the Project Management staff in the planning and implementation of a project. Enhances customer relationships by providing excellent service. Responsible for assisting the Project Manager with contract administration, procurement, subcontract awards, scheduling and costing, oversight of project quality and safety, compliance, and customer service, all in an effort to minimize risk and to keep the focus on LEMOINE's Foundations for Successful Execution Job Responsibilities: * Manage and maintain project documentation to ensure compliance with program standards and requirements. * Efficiently process and track change orders through the project management system to support project adjustments. * Review and verify scopes of work to ensure accuracy and alignment with project objectives. * Verify internal systems data is updated promptly and accurately to maintain project integrity and transparency. * Assist in generating and compiling reports to provide insights into project progress, budgets, and timelines. * Monitor and verify adherence to quality standards and project specifications during construction phases. Required Qualifications: * Bachelor's Degree from an accredited university in Construction Management, Engineering, or a related field, or equivalent work experience. * Internship experience in the commercial construction industry preferred. * General knowledge of construction management, project planning, scheduling, and estimating for multiple trade disciplines. * Proficiency in Microsoft Office Suite. * Strong math, organizational, written, and verbal communication skills. Physical Requirements: The physical and mental demands of this position must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands to finger, handle, or feel, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl. The employee must be able to occasionally lift and/or move up to 50 pounds.. Section 3: This position is a Section 3 eligible job opportunity under the Housing and Urban Development Act of 1968. Section 3 residents are encouraged to apply. The purpose of Section 3 of the HUD Act of 1968 is to ensure that preference for employment opportunities generated from the expenditure of HUD funds is directed to local low and very low-income persons, particularly those who receive federal housing assistance. All qualified applicants will be considered but may not necessarily receive an interview. Due to the large volume of submissions received by this office, information concerning application and/or interview status cannot be provided. Selected applicants will be contacted for next steps in the interview process. Applicants who are not selected may not receive notification. This position is subject to close at any time once a satisfactory applicant pool has been identified. Equal Opportunity Employer The Lemoine Company, L.L.C. is an Equal Opportunity Employer. All applications are considered without regard to race, color, sex, age, religion, national origin, or disability. Only job-related factors will be considered in deciding applicants' qualifications for positions.

Systems Engineer II serves as a technical professional responsible for designing, implementing, and supporting enterprise endpoint management and systems infrastructure. This position functions as a subject matter expert in modern device provisioning, automation, enterprise software deployment, and Microsoft 365 endpoint workloads. Systems Engineer II supports FGCU's modernization strategy by helping transition device management from traditional imaging (SCCM) to modern cloud-based provisioning through Microsoft Intune, Windows Autopilot, and related Microsoft 365 tools. Typical duties include but not limited to: * Assists in the design, implementation, and maintenance of enterprise-level endpoint and systems infrastructure services. * Serves as a subject-matter expert for Microsoft Intune, Windows Autopilot, Endpoint Security, and Windows Update for Business. * Supports Microsoft 365 workloads, including device configuration, compliance policies, and conditional access. * Enhances automation using scripting languages such as PowerShell, Intune configuration scripts, or API integrations. * Performs troubleshooting, monitors system performance, and ensures endpoint security compliance. * Develops and maintains system documentation, diagrams, and operational runbooks. * Participates in technology evaluations, testing, and implementation of new endpoint solutions. * Supports the transition from imaging to provisioning and the lifecycle management of Windows and mac OS devices. * Assists System Engineer team members with technical issues. * Participates in business continuity and disaster recovery planning as it relates to endpoint infrastructure. * Supports cross-training initiatives and staff development efforts within the Endpoint Deployment Team. Additional Responsibilities: * Performs other job-related duties as assigned. Additional Job Description Minimum Qualifications: * This position requires six years of directly related full-time experience or, as an alternative, a Bachelor's degree in Computer Science or related field and two years of full-time experience directly related to the job functions. Preferred Education: * Master's degree from an accredited institution. * Experience using enterprise endpoint management systems such as Intune, SCCM, JAMF, or similar MDM/UEM tools to deploy software, apply configuration and security policies, manage updates, and maintain device compliance. * Experience with PowerShell or similar scripting tools to assist with automation, troubleshooting, and configuration management * Experience with server system products involving a variety of software and hardware implementations. * Microsoft Certified: Endpoint Administrator Associate * Microsoft 365 Certified: Administrator * JAMF Certified Admin (JCA) * CompTIA Security+ * ITIL Foundation * VMware Certified Professional Knowledge, Skills, & Abilities: * Knowledge of networking concepts (e.g. Systems, Protocols, Directory Services). * Knowledge and proficiency with relevant business systems, operating systems, and servers. * Knowledge of and ability to administer cloud-based applications (Saas). * Skill in managing servers and storage hardware. * Skill in using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. * Advanced verbal and written communication skills and the ability to present effectively to small and large groups. * Ability to take initiative to plan, organize, coordinate and perform work in various situations when numerous and competing demands are involved. * Ability to work independently and follow through on assignments. * Ability to provide professional customer service. * Ability to present technical strategies to leadership; produce clear diagrams/runbooks; mentor/train staff. * Diagnose complex issues; design and implement solutions; set standards; plan long term improvements. * Scope/plan/manage complex projects, budgets, timelines, risks; deliver status to stakeholders; run post implementation reviews; ensure business continuity. * Handle escalated issues; design user centered solutions for faculty, staff, and students; empathetic stakeholder management. * Lead cross team initiatives; influence direction; drive change management and culture of accountability/continuous improvement. Pay Grade 18 FGCU is a State University System of Florida member and an Equal Opportunity and Equal Access employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, or protected veteran status.

Job DescriptionDescription: Aerox Aviation Oxygen Systems and Aerox Fluid Power, based in Bonita Springs, FL and Hudson, OH, is a leading manufacturer of lifesaving aircraft oxygen systems and accessories for general aviation, military, and space applications. We are seeking a Mechanical Engineer to join our mechanical engineering team. The Mechanical Engineer is responsible for definition, execution and evaluation of designs, analysis, development, testing and control of major aerospace oxygen engineering projects where a substantial amount of initiative and creativity are involved. Embraces and executes the Company Core Values. Actively supports the Company's vision and goals. This is a multi-faceted job that will allow the successful candidate to work with leading aerospace OEMs, and to take system level requirements and to bring them all the way to market realization with new products. Requirements: ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. · Performs the detailed design and development of oxygen system components including regulators, valves, masks, and other aerospace oxygen components · Develops technical solutions and manages component quality, mass, cost, and timing to meet program milestones. Broad scope of responsibilities includes oxygen components and systems. · Responsible for working cohesively with a group of engineers responsible for similar products on other applications, actively engaging in team issue resolution. · Capable of managing very broad or numerous projects with high degree of difficulty. · Exercises independent judgment, with minimal input from supervisor. · Identify and manages development activities as appropriate. · Design, analysis, release, and test of parts and/or subsystems for production. · Provides feedback to management (i.e. progress to timing, evaluation of test results). · Releases component designs on-time with excellence. · Manages change control for design responsible components. · Demonstrates that designs meet requirements through analysis, development and validation processes. · Analyzes design through design failure modes effects analysis (DFMEA), Oxygen Hazard Analysis (OHA) · Occasional travel ( EDUCATION and/or EXPERIENCE · BS degree in Mechanical Engineering or related program and a minimum of 5 years of work experience in aerospace valve and regulator design. · CAD experience using Solidworks, Catia, or equivalent tools. · Thorough knowledge of design, development and test engineering, manufacturing and assembly operations. · Thorough knowledge of gas regulator and valve design fundamentals · Familiarity with Aerospace Oxygen design specifications and requirements (MIL, ARP, AS, AIR, CGA, etc) and FAA and EASA regulations regarding oxygen system design. · Ability to manage multiple project assignments as well as identify and remove roadblocks. · High level of understanding of robust engineering tools/methods, i.e. DFMEA, DVP&R · Excellent analytical problem solving skills where problems are very unusual and challenging. · Excellent oral and written communication skills. · Detail oriented, self-motivated with a strong sense of personal ownership and a team attitude. · High level of interpersonal skills to work effectively with and motivate others. · Ability to work independently while prioritizing and supporting multiple tasks in a high paced and exciting environment. · Must be a US Citizen or permanent resident. Position may be located in either our Bonita Springs, FL or Hudson, OH facility. Visit us at ************* or *********************** About The Aerox Group The Aerox Group is comprised of two companies, Aerox Aviation Oxygen Systems (AAOS) and Aerox Fluid Power (AFP). Our passion is American Aerospace Manufacturing and our specialty is Oxygen Systems engineered for the Aerospace Industry. We provide a complete line of oxygen products to the aerospace industry including TSO certified Oxygen Masks, Cylinder/Regulator Assemblies, Walk-Around Portable systems, PMA Oxygen Cylinders, MIL-SPEC connectors, CRU-60 connectors, On-Off Switches, Bail-out Systems, and repair and overhaul through our FAA Repair Station.

Company Name: Baker Concrete Construction, Inc **Req ID** : 6793 **Travel:** Up to 25% **Number of Openings:** 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. **Summary** The **Project Engineer** supports field activities and spends a majority of time working with the Project Manager supporting project administration on multiple small projects, or one medium to large-size projects. Activities include managing the job transition process; and supporting the management of cost and schedule, constructability, technical evaluations, quality, safety, work planning, procurement, contract management, regulatory compliance, etc. **Roles and Responsibilities** The **Project Engineer** will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. + Generates and obtains approvals of monthly billing and earned values + Develops and manages the project schedule on small or mid-sized projects + Analyzes targets and goals, job cost summaries, and other reports + Alerts the Superintendent and Project Manager of project impact relating to resource management, crew make-up/size, etc. + Generates and obtains approval of the initial budget and subsequent updates, and reviews weekly job cost summaries and advises the Project Manager + Generates estimates of change orders and may interface with pre-construction on original bids + Collaborates with pre-construction and the project team to manage the job transition process, communicate project requirements, and develop the initial procurement plans, budgets, etc. + Generates material quantity take-offs, scoping documents, terms and conditions, delivery, etc. as applicable to support the procurement process + Generates requests for proposal(s), solicits and reviews quotations, and recommends a procurement decision to Project Manager + Prepares field purchase orders for standard purchase packages, and generates and obtains approval of Major Purchase Orders + Gathers and roughs-in monthly financial reports, and participates in the project financial reviews + Works with the Project Manager to approve and code project invoices + Generates and obtains approval of technical records such as constructability reports, RFI's, inspection records, work packages and deviation reports + Coordinates with the Superintendent, Field Project Engineer, and Line and Grade to generate required as-built records + Manages work package closure, punch lists, and project turnover process and approves pre- and post-pour checklists + Collects necessary documentation to identify and determine impact of potential contract changes, disputes, and claims + Leads LEAN/SQP committee and identifies improvement opportunities + Ensures all subcontractors are in compliance with terms of subcontracts, generates, and obtains approval on impact notices as needed + Reviews and confirms reports documenting compliance (Company and subcontractors) with prevailing wage, workforce utilization, MBE/SBE participation, etc., and advises the Project Manager of issues + Interfaces with Safety and Risk Management in establishing clinics, managing first report of injuries, and assisting with co-worker case management + Follows Company Recruitment and Hiring Guidelines + May conduct new-hire orientation and process E-Verify (must be certified) + May coordinate tracking and completion of training requirements with project management **Requirements** + Bachelor's degree from an accredited college or university and 2 years' of experience or 6 years' of construction related experience and/or training; or equivalent combination of education and experience + Proficiency in Microsoft software programs such as Word, Excel, and PowerPoint The following competencies are needed to successfully perform this job: + Ability to read, analyze, and interpret general business documents, technical procedures, and government regulations + Ability to write reports, business correspondence, and procedures + Ability to communicate well with all levels of workers involved with the project + Ability to apply concepts such as fractions, percentages, ratios, proportions, geometry, and trigonometry to practical situations + Ability to analyze and compute mathematical differences from all stages of drawings from conceptual to final drawings including development of shop drawings Ability to understand Cost Accounting + Basic understanding of construction software such as Primavera, Timberline, Vista and the like + Ability to understand, customize and modify spreadsheets + Ability to direct work and evaluate strengths and weaknesses of co-workers + Ability to work in a team environment + Ability to define problems, collect information, establish facts, and draw valid conclusions + Ability to develop construction schedule via the critical path method + Ability to understand contracts, specifications, drawings, and scope of work + Ability to be proactive in maximizing our return on investment at all time At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR.

Job Description DUTIES AND RESPONSABILITIES 2.1 Determine Processing Requirements to produce cost effective conforming product. 2.2 Create, edit, and support documentation efforts for process development and continual improvements (i.e. Work Instructions, PFMEAs Process Flow, etc.) as needed. 2.3 Create, edit, and support quality on dimensional inspections. 2.4 Determine, document methodology for inspection specifications for setting up inspections, to include but not limited to, gage designs and prints, etc. 2.5 Receives requests from staff and reviews drawings for accuracy prior to release to the floor, including but not limited to, creating/updating Exalta blank and in-process prints. 2.6 Evaluates data to identify deviation from specifications to communicate to management. 2.7 Develop manufacturing blueprints, routers, BOMs, and other supporting documents. 2.8 Create validation protocols based on Master Validation Plan and customer specific procedures execute approved validations protocols and create validation summary reports. 2.9 Support production flow of prototypes, verification runs, etc. Support initial production runs and support Design for Manufacturability reviews for customer feedback. 2.10 Design and develop tools, fixtures for standardization of processes for improved manufacturability and throughput. 2.11 Review and conduct root cause analysis on deviations that were identified during validation activities and resolve the deviated condition or justify why the deviation is acceptable. 2.12 Understand and work toward Engineering objectives, cost containment, process development, root cause analysis, data analysis, etc. 2.13 Evaluate and improve manufacturing processes by applying knowledge of product design, fabrication, assembly, tooling and materials. 2.14 Manage projects and flow of the design transfer process through prototyping and into production including but not limited to reporting status, timeline development, etc. KEY SKILLS, KNOWLEDGE, AND COMPETENCIES 3.1 General Knowledge and understanding of IS0 13485 and FDA 21 CFR 820 as it pertains to process, inspection, validation, verification, design control, and documentation, etc. 3.2 At least 3-5 years of experience in Product Development, Quality Control, Quality Assurance and/or Manufacturing Process position at a Medical Device manufacturer preferred. Design and Machining experience a plus. 3.3 SolidWorks software knowledge and experience a must. 3.4 Minitab analysis knowledge a must. 3.5 Ability to read blueprints, customer/internal specifications, and procedures 3.6 Detailed knowledge of using precision measuring instruments. The instruments should include, but not be limited to calipers, ID and OD micrometers, depth gages, indicators, and plug and tread Go/ No Go gauges. 3.7 Detail Oriented as shown by documented measurement accuracy, to include but not limited to print reviews, document reviews, and organizational skills. 3.8 Proficient English communication skills- reading, writing, and speaking- as it relates to the job, Spanish a plus. Provide verbal instruction and training to the other personnel and operators on implementation of processes, inspection methods, performing validations, and proper documentation. 3.9 Skilled in basic math including but not limited to adding, subtracting, multiplication, division, and basic algebra for the purpose of calculating specifications and engineering calculations. 3.10 Skilled in adapting to a changing work environment, competing demands and ability to deal with frequent change, delays or unexpected events while maintaining timelines. 3.11 Skilled in adapting to a changing work environment, competing demands and ability to deal with frequent change, delays or unexpected events while maintaining timelines. 3.12 Skilled in working independently, following through with assignments with minimal direction. Leadership skills a must. 3.13 Reasoning skills including but not limited to to comparing, classifying, analyzing and coordinating- minimizing duplication of effort. 3.14 Evaluate and improve manufacturing processes by applying knowledge of product design, fabrication, assembly, tooling and materials. EDUCATION, CERTIFICATIONS, AND/OR LICENSES REQUIREMENTS: B.S. in Mechanical Engineering, Manufacturing Engineering or equivalent PHYSICAL REQUIREMENTS: Ability to lift up to 50 lbs. and operate material handling equipment safely PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS: Safety glasses on the manufacturing floor.

General Description The City of North Port strives to be an employer of choice and most of our employees turn jobs into long term careers. The salary shown in the is the full range for this position from entry to later career. NEW EMPLOYEES ARE HIRED AT, OR NEAR THE ENTRY POINT SHOWN, DEPENDING ON QUALIFICATIONS AND RELEVANT EXPERIENCE. GENERAL DESCRIPTION: Responsible professional administrative and technical position providing high level engineering and management support to the Utilities Engineering Division Manager and Assistant Director in administrative and engineering aspects of the Utilities Department, including asset management. The Utilities Engineer may have direct or indirect supervision responsibilities. Position reports to Utilities Engineering Division Manager. Essential Job Functions * Provides support to the Utilities Engineering Division Manager and the Assistant Director in the development and management of the engineering and construction of the City's utility systems. * Organizes, manages, directs and performs the planning, budgeting, engineering, design, permitting, construction, and related functions for capital and non-capital projects for the utilities Department. * Evaluates and makes engineering recommendations for specific system expansion projects, process control changes and general system improvements with emphasis on longevity and cost effectiveness. * Manages the engineering support for the asset management program for water, wastewater, and reclaimed water infrastructure, including both linear and vertical assets in the city's utility system. * Leads risk, criticality, and condition assessment programs to plan for repair and replacement of infrastructure. * Provides engineering advise for establishing and managing Asset Management Plans (AMPs) for the City's assets. * Collaborate with teams that support asset management, including but not limited to various operations and maintenance departments and programs. * Serve as an internal technical resource to the asset management program team. * Participate in the preparation of the Department's budget and capital improvement programs. * Develops capital improvement plan to implement system improvements with consideration for cost-control and cost-reduction methods. * Oversees the preparation of all bid specifications, documentation and permits for all construction and capital improvements, including the preparation of the Request for Bids (RFB) and calculation of liquidated damages. * Construction administration and management for capital improvement projects. * Conduct field meetings and inspections of utility construction, as needed. * Coordinating with regulatory agencies for project approvals during design and compliance during construction. * Provides engineering recommendations for the permitting of the water treatment plant and the wastewater treatment plant facilities such as consumptive use permitting and operating permits. * Represents the department in Staff Development Review meetings and reviewing of all plans of developers, as needed. * Supervises. assigns, and schedules work assignments to direct and indirect reports in the engineering division. * Manages the work of consulting engineers. Prepares Requests for Letters of Interest (RLI), review of Letters of Interest (LOI), and evaluation and ranking of consultants in the NPU engineering library for projects related to Capital improvements. Prepares Request for Proposals (RFP) for selection of consulting firms for design projects and studies. * Meets with developers, realtors, builders, etc. to coordinate and explain utility requirements and standards regarding future developments within the City. * Makes recommendations to the Utilities Engineering Division Manager for engineering and contract services. * Contributes to the creation of departmental presentations and may present for Commission meetings, other formal conferences, regulatory agencies, etc. * Coordinates with and attends meetings with FDOT on their programs that are within the City limits. * Responsible for preparing and NPU approving permits in FDOT rights of way. * Preparation of a monthly status report, attendance, and participation in monthly coordination meetings at Sarasota County with all local utility partners (TECO, Sarasota County, Sunshine 811, Frontier, FDOT, etc.) * Assists in the preparation and supervision of emergency operations and development of procedures to ensure the safe operation of the water/wastewater systems, to include meeting all OSHA requirements. * Assists in establishing and maintaining Standard Operating Procedures. * Responsible for updating Standard Specifications and Standard Details utilizing AutoCAD on an as needed basis. * Assists the Utilities Engineering Division Manager in the creation and review of City ordinances, resolutions, reports and presentations. * Directs the Engineering Department in the absence of the Utilities Engineering Division Manager. (These essential job functions are not to be construed as a complete statement of all duties performed. Employees will be required to perform other job related marginal duties as required.) Knowledge/Skills/Abilities * Knowledge of utility engineering and construction practices and water and wastewater utilities procedures. * Knowledge of rules and regulations regarding utilities programs. * Knowledge of rules and regulations with particular reference to federal and state utility regulations. * Knowledge of civil/environmental engineering practices as it relates to water and wastewater construction and operations. * Knowledge and practice of project and construction management. * Skilled in the use of small office equipment, including copy machines or multi-line telephone systems. * Ability to apply mathematics to engineering work. * Ability to organize and communicate effectively and be an organized team player. * Ability to prepare complex reports and statements. * Ability to prepare specifications and permitting for water and wastewater projects. * Ability to create public presentations and present in a professional setting. * Ability to analyze work methods and procedures. * Ability to communicate, interpret and explain ordinances, policies, etc. to the public. * Ability to express ideas effectively orally and in writing. * Ability to work in a team environment and to establish and maintain effective working relationships with employees and the public. * Ability to plan, schedule, coordinate and review the work of subordinates in a manner conductive to full performance and high morale. * Ability to utilize computer hardware and software effectively (Word, PowerPoint, Excel, AutoCAD, Smartsheet or other Project Management Software). Education, Experience, Licenses and Certifications Education and Experience: * Bachelor of Science Degree in Civil/Environmental Engineering, or related field is required. * Master's degree is preferred. * Ten (10) years of work experience in civil/environmental/water/wastewater engineering. (A comparable amount of relevant training, education and/or experience may be substituted for the above qualifications.) Licenses and Certifications: * Must possess a valid Florida Driver's License. * Licensed Professional Engineer in the State of Florida or ability to obtain within six (6) months Emergency Response Responsibility Every City employee has emergency response responsibilities, though not every position will require routine assignments during an emergency event. All employees are subject to recall around the clock for emergency response operations, which may require irregular work hours, work at locations other than the normal work location, and may include duties other than those specified in the employee's official job description. Assignments in support of emergency operations may be extensive in nature, with little advance notice, and may require employees to relocate to emergency sites with physically and operationally challenging conditions. Hiring Range Statement Please note, the hiring pay range for this position isthe minimum up to a rate equal to or less than the midpoint of the salary range. Vets Preference Statement The City of North Port, FL is an Affirmative Action/ADA/Veterans' Preference and Equal Opportunity Employer. Women, Minorities, and Persons with Disabilities are Encouraged to Apply.

General Summary & Essential Responsibilities Are you ready to take the next step in your engineering career and make a visible impact in your community? As an Engineer II, you'll play a key role in shaping and maintaining essential County infrastructure. This mid-level position offers the opportunity to apply your technical expertise independently while collaborating with experienced engineers on projects that serve the public good. You'll plan work details, make sound technical decisions, and tackle meaningful engineering challenges, all within a supportive environment that values professional growth, problem-solving, and public service. Min. Education, Licenses and Certifications Education and Experience: An equivalent combination of relevant training, education and experience: * Bachelor's Degree: * Civil Engineering * Environmental Engineering * Three (3) years of experience in civil or environmental engineering. Licenses and/or Certificates: * Must maintain a valid driver's license. * Preferred: * Professional Engineer (P.E.) license. Knowledge, Skills and Abilities An Engineer II for Charlotte County Utilities is a key contributor to the planning, design, and construction of essential water, wastewater, and utility infrastructure that keeps our community running. This role involves reviewing and approving utility plans and permits, interpreting as-built drawings and technical reports, and preparing bid packages and construction documents. You will ensure all work meets County and industry standards. Serving as a trusted technical resource, you will provide technical guidance to contractors, vendors, and customers while delivering responsive problem-solving and exceptional service to support safe, reliable utility operations countywide. Supplemental Information PHYSICAL DEMANDS Walking, sitting, hearing, seeing up close, talking, standing, finger movement, repetitive motions, depth perception. WORK ENVIRONMENT Work is performed in a relatively safe, and secure work environment. RISK/SAFETY CONDITIONS The position requires no exposure or risk related to physical and/or mental health and safety. To perform this job successfully, an individual must be able to perform the essential job functions satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary job functions herein described. Since every duty associated with this position may not be described herein, employees may be required to perform duties not specifically spelled out in the , but which may be reasonably considered to be incidental in the performing of their duties just as though they were actually written out in this job description. Charlotte County is an Affirmative Action/ADA/Veterans' Preference and Equal Opportunity Employer. Women, Minorities, and Persons with Disabilities are Encouraged to Apply.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Job Description The Field Engineer gathers the necessary field information regarding aerial, buried or underground Outside Plant (OSP) telecommunications cable and associated facilities. The information provided by the Field Engineer will be utilized to facilitate the design of work orders to place new network cables, utility poles, hand holes, terminal cabinets, etc. or to rearrange/modify the existing network. (This is meant to be a guide. Duties may vary dependent upon management.) Essential Position Functions: • Take detailed measurements, notes and pictures of the proposed telecommunications network construction locations, cable routes, and equipment sites. • Travel to required work sites. • Obtain accurate distances and necessary field data using a measuring wheel, range finder, pole stick or other outside plant engineering tools. • Follow measuring guidelines set forth by the customer. • Adhere to safety guidelines set forth by TrueNet and customer. • Report data/notes to appropriate design team member and/or manager. • Maintain company vehicle (if provided) as directed by manager and/or safety team. • Attend onsite meetings as directed by TrueNet and/or customer. • Attend training sessions to maintain and build upon skill, knowledge and performance levels. • Other duties as assigned. Education and/or Experience: • High School Diploma or GED required. • Experience with and understanding of OSP construction techniques required. • Working knowledge of OSP infrastructure, equipment, easement, right-of-way and permit documents is preferred. • Working knowledge of OSP aerial, buried and UG Plant. • Ability to prioritize and complete assignments accurately and in a timely manner. • Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. • Intermediate proficiency with Microsoft Office suite (Word, Excel, Outlook) required. • Strong interpersonal, organizational, verbal and written communications skills. • Must be able to work alone, and with a team. • Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Frequent walking, standing, stooping, kneeling, crouching within the work area. • Lifting of up to 50 pounds up to one-third of the time. • Must be able to work and travel in various weather conditions. • Use of ladder and power tools required more than 50% of the time. • Ability to effectively communicate with employees, management, peers, et al. Work Environment: The work environment characteristics described here are representative of those of a field environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • This is a field position and requires 80% or more travel. • Most work is completed outdoors. • Must be able to work in loud, noise-filled environment out in the field. • The position requires working independently, as well as part of a team. • This position requires verbal contact with others daily. • Frequent use of a computer is necessary. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, gender expression, sexual orientation, national origin, genetics, disability, age or veteran status. TrueNet is an Equal Opportunity Employer of Minorities, Females, Individuals with Disabilities and Protected Veterans. California Consumer Privacy Act (CCPA), read here We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to sponsor visas for this position (H1B, etc.). TrueNet Communications is a national infrastructure engineering and specialty contractor serving the wireless, broadband, and telecommunications markets. We plan, design, build and support communications infrastructure for our clients across North America. Join our team of professionals where you can advance your career in a fast pace, GROWING industry! We offer competitive salaries, excellent benefits, 401k, paid time off and paid holidays. Powered by JazzHR lZooX5IbNP

Wharton-Smith, Inc. is seeking a motivated and detail-oriented Field Engineer to join our Commercial Division in North Port, FL. This is an excellent opportunity for an entry-level construction professional to gain hands-on experience in community-focused commercial projects, including schools, fire stations, municipal buildings, and other public facilities. The Field Engineer will work closely with the Project Superintendent and Project Manager to learn the fundamentals of project coordination, layout, and field management. This role provides a strong foundation for a long-term career in project management or field supervision. Key Responsibilities Assist the Superintendent and Foreman with layout, measurement, and field engineering tasks. Support daily project operations, including scheduling updates, document tracking, and field communication. Help prepare and process Requests for Information (RFIs) and submittals. Maintain As-Built drawings, progress logs, and photo documentation. Participate in site inspections, safety meetings, and quality control reviews. Collaborate with subcontractors and suppliers to ensure accurate material deliveries and installation tracking. Gain exposure to estimating, scheduling, and project documentation systems. Qualifications Bachelor's degree in Construction Management, Civil Engineering, or a related field (recent graduates encouraged to apply). Strong organizational, analytical, and communication skills. Proficiency in Microsoft Outlook, Word, and Excel; exposure to scheduling or project management software a plus. Eagerness to learn, take initiative, and grow within a collaborative construction environment. Why Wharton-Smith? At Wharton-Smith, we take pride in building communities, not just structures. From schools to public safety facilities, our projects make a lasting difference. We value integrity, teamwork, and professional growth-and we invest in developing the next generation of construction leaders. We offer competitive compensation, comprehensive benefits, and clear career paths for those ready to start their journey in construction. Launch your career with Wharton-Smith and help us build a stronger North Port-one project at a time.

Department:IS Information Technology Svcs Work Type:Full Time Shift:Shift 1/ to Minimum to Midpoint Pay Rate:$37.72 - $49.03 / hour Responsible for the daily administration and management of technical infrastructure environment. Ensures the availability, functionality and performance of infrastructure services. Responsible for the engineering, build, deployment, configuration, operation, and maintenance of technical systems. Responsible for technical infrastructure administration including provisioning, monitoring, tuning, capacity planning, security, troubleshooting, support and maintenance. Areas of focus may include application delivery, disaster recovery, virtual or physical infrastructure, operating systems, storage, and/or directory services. This incumbent will need to be onsite as needed. Responsibilities Demonstrates subject matter expertise on at least 1 distinct application / system functions, including: server hardware, datacenter virtualization, datacenter redundancy and high availability, enterprise storage, enterprise backup and recovery platforms, directory services, Microsoft exchange, cloud-based hosting, public key infrastructure, Microsoft Server operating systems, Linux/Unix/AIX operating systems, Operating System and application maintenance, enterprise monitoring, Microsoft Desktop operating systems, application virtualization, application delivery controller, client-based VPN, clinical application technical administration, diagnostic imaging infrastructure, clinically integrated hardware/peripherals. Additionally, demonstrates knowlege of skills listed above. Continuously strives to further improve relevant job knowledge/expertise. Works independently, seeks input from others where appropriate, and makes timely decisions Provides consultative IS advice regarding job specific functions as well as general infrastructure Knowledgeable of ITIL fundamentals Demonstrates ability to execute and develop a comprehensive cutover/implementation plan (whether as part of a project or service request) Develops and initiates testing and validation methods prior to change implementation (low complexity) Develops and maintains product roadmaps, including lifecycle management, maintenance schedules and capacity planning. Demonstrates ability to adapt plans and engineer customized solutions when faced with fundamental technical obstacles or challenges Determines system specifications and working parameters for hardware/software compatibility Utilizes and audit performance monitoring methods to identify and resolve performance related problems in the environment. Compiles data for reporting leading/lagging measures and performance metrics to organizational leadership Performs routine maintenance, including patching, updating, and upgrading current infrastructure hardware and software. Validates that routine maintenance has been successfully performed. Maintains and supports assigned systems within the organization Provides tier 3 support for other IS teams, and end users Coordinates with vendors regarding new technologies and implementations Serves as a department subject matter expert and responsible for solving and delivering problems/solutions Participates in problem resolution and root cause analysis Demonstrates ability to function effectively as a resource on projects, responsible for identifying delivery constraints and escalates appropriately. Assists application owners and vendors with project go-lives Demonstrates ability to function effectively as a contributing/consulting resource on projects Recommends purchase of products or services necessary to support the test and production operating environments Demonstrates fundamental knowledge of system integration. Adopts new department procedures and processes quickly Maintains industry awareness and learns skills to stay current with trends Demonstrates the highest level of work ethic, values, and customer service while expressing genuine concern for customers and the organizational mission Requirements Required Skills and Experience * Microsoft SCCM (System Center Configuration Manager): * Advanced experience administering and supporting SCCM infrastructure * Proven ability to manage software deployments, update compliance, and operating system deployment (OSD) at scale * Familiarity with SCCM Maintenance Tasks, Distribution Points, and Software Center configuration * Operating System Deployment (OSD): * Strong knowledge of building, customizing, and deploying OS images for boththin clients and PCs * Skilled inintegrating BIOS/firmware updatesinto task sequences * Experience with driver management, task sequencing, PXE boot, and MDT integration * Familiarity with staging deployments for high availability and minimal end-user impact * PowerShell Scripting: * Advanced PowerShell scripting skills for task automation, reporting, remediation scripts, and custom logic * Ability to build modular and reusable scripts for deployment and configuration management * Application Packaging & Deployment: * Hands-on experience creating and deploying MSI, EXE, and custom scripted applications via SCCM * Ability to test, troubleshoot, and ensure application compatibility across platforms * Soft Skills: * Strong documentation, and cross-functional collaboration skills * Strong communication, and time management skills * Ability to work independently, and prioritize tasks * Ability to support large-scale deployments in an enterprise environment Preferred * Group Policy Management (GPO): * Solid understanding of Active Directory Group Policy creation, inheritance, and troubleshooting * Experience enforcing workstation security and configuration standards using GPOs * Windows Patching & Compliance Management: * Proficient in creating and managing Automatic Deployment Rules (ADRs)for Windows updates * Experience monitoring deployment success, troubleshooting failures, and ensuring patch compliance across devices * SCCM Insights & Reporting: * Familiarity with SCCM Software Insightsfor license tracking, usage analysis, and compliance reporting * Experience creating custom SCCM reports and dashboards using SQL or Power BI is a plus * Windows OS Support: * Strong experience supporting and troubleshooting Windows Server operating systems (20122025) * Expertise with Windows 10 and Windows 11 environments, including image lifecycle management and feature updates * BitLocker & Encryption Management: * Experience deploying, configuring, and supporting BitLocker encryptionacross enterprise devices * Proficient in managing BitLocker policies and BitLocker recovery key integration with SCCMand Active Directory Education:Bachelors degree from an accredited college or university with a concentration in Computer Science, Information Systems, or equivalent relevant work experience required(5 years of role specific work experience in lieu of a Bachelors degree).Experience:3 years experience in relevant technical role.Licensure:N/ACertification:N/AOther:US:FL:Fort Myers

The Systems Engineer II completes system installation and management, system monitoring and performance tuning, diagnostics and troubleshooting, user support coordination, backup and storage management, data center maintenance, infrastructure upgrades, and other related tasks. Typical duties include but not limited to: * Assists in design, development, support and maintenance of systems infrastructure. * Completes system installation and management, system monitoring and performance tuning, diagnostics and troubleshooting, user support and testing coordination, backup and storage management, data center maintenance, infrastructure upgrades, and other related tasks. * Administers application security and configurations. * Ensures data/media recoverability by implementing a schedule of system backups and database archive operations. * Conducts routine infrastructure and security audits to ensure compliance with established standards, policies, and configuration guidelines. * Monitors and maintains continuity with system licensing and maintenance agreements. * Serves as an escalation point for IT User Support Specialist and Systems Engineer I. * Tracks problems in the work order system. * Maintains records, forms, and standard operating procedures documentation. * Develops new techniques and procedures to enhance university systems infrastructure. * Reviews processes, evaluates results, recommends new processes, and promotes best practices. Additional duties: * Performs other job-related duties as assigned. Additional Job Description Required Qualifications: * This position requires either seven years of directly related full-time experience or, as an alternative, a Bachelor's degree in Computer Science or related field and three years of full-time experience directly related to the job functions. * Professional full-time experience with enterprise systems and applications and current versions of Windows Server and Linux or other enterprise services. * Experience with large enterprise computing environments that include multiple site locations. * Experience with Identity Management, Disaster Recovery procedures and domain administration. Preferred Qualifications: * Five years professional, full-time experience with application system support and implementation in a medium to large computing environment. Knowledge, Skills, & Abilities: * Knowledge of basic networking concepts (e.g. Systems, Protocols, Directory Services). * Knowledge and proficiency with relevant business systems, operating systems, and servers. * Knowledge of and ability to administer local and cloud based applications (SaaS) such as Azure/AWS and/or Office 365. * Skill in shell scripting/automation, project management of small initiatives, and troubleshooting. * Skill in managing servers and storage hardware. * Skill in using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. * Excellent interpersonal skills. * Advanced verbal and written communication skills and the ability to present effectively to small and large groups. * Ability to take initiative to plan, organize, coordinate and perform work in various situations when numerous and competing demands are involved. * Ability to collaborate and work effectively within the community and willingness to contribute to a team effort. * Ability to work independently and follow through on project assignments. * Ability to provide professional customer service and act as a customer advocate Pay Grade 18 FGCU is a State University System of Florida member and an Equal Opportunity and Equal Access employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, or protected veteran status.

Travel: Up to 25% Number of Openings: 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. Summary The Project Engineer supports field activities and spends a majority of time working with the Project Manager supporting project administration on multiple small projects, or one medium to large-size projects. Activities include managing the job transition process; and supporting the management of cost and schedule, constructability, technical evaluations, quality, safety, work planning, procurement, contract management, regulatory compliance, etc. Roles and Responsibilities The Project Engineer will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. * Generates and obtains approvals of monthly billing and earned values * Develops and manages the project schedule on small or mid-sized projects * Analyzes targets and goals, job cost summaries, and other reports * Alerts the Superintendent and Project Manager of project impact relating to resource management, crew make-up/size, etc. * Generates and obtains approval of the initial budget and subsequent updates, and reviews weekly job cost summaries and advises the Project Manager * Generates estimates of change orders and may interface with pre-construction on original bids * Collaborates with pre-construction and the project team to manage the job transition process, communicate project requirements, and develop the initial procurement plans, budgets, etc. * Generates material quantity take-offs, scoping documents, terms and conditions, delivery, etc. as applicable to support the procurement process * Generates requests for proposal(s), solicits and reviews quotations, and recommends a procurement decision to Project Manager * Prepares field purchase orders for standard purchase packages, and generates and obtains approval of Major Purchase Orders * Gathers and roughs-in monthly financial reports, and participates in the project financial reviews * Works with the Project Manager to approve and code project invoices * Generates and obtains approval of technical records such as constructability reports, RFI's, inspection records, work packages and deviation reports * Coordinates with the Superintendent, Field Project Engineer, and Line and Grade to generate required as-built records * Manages work package closure, punch lists, and project turnover process and approves pre- and post-pour checklists * Collects necessary documentation to identify and determine impact of potential contract changes, disputes, and claims * Leads LEAN/SQP committee and identifies improvement opportunities * Ensures all subcontractors are in compliance with terms of subcontracts, generates, and obtains approval on impact notices as needed * Reviews and confirms reports documenting compliance (Company and subcontractors) with prevailing wage, workforce utilization, MBE/SBE participation, etc., and advises the Project Manager of issues * Interfaces with Safety and Risk Management in establishing clinics, managing first report of injuries, and assisting with co-worker case management * Follows Company Recruitment and Hiring Guidelines * May conduct new-hire orientation and process E-Verify (must be certified) * May coordinate tracking and completion of training requirements with project management Requirements * Bachelor's degree from an accredited college or university and 2 years' of experience or 6 years' of construction related experience and/or training; or equivalent combination of education and experience * Proficiency in Microsoft software programs such as Word, Excel, and PowerPoint The following competencies are needed to successfully perform this job: * Ability to read, analyze, and interpret general business documents, technical procedures, and government regulations * Ability to write reports, business correspondence, and procedures * Ability to communicate well with all levels of workers involved with the project * Ability to apply concepts such as fractions, percentages, ratios, proportions, geometry, and trigonometry to practical situations * Ability to analyze and compute mathematical differences from all stages of drawings from conceptual to final drawings including development of shop drawings Ability to understand Cost Accounting * Basic understanding of construction software such as Primavera, Timberline, Vista and the like * Ability to understand, customize and modify spreadsheets * Ability to direct work and evaluate strengths and weaknesses of co-workers * Ability to work in a team environment * Ability to define problems, collect information, establish facts, and draw valid conclusions * Ability to develop construction schedule via the critical path method * Ability to understand contracts, specifications, drawings, and scope of work * Ability to be proactive in maximizing our return on investment at all time At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR. Nearest Major Market: Fort Myers Nearest Secondary Market: Cape Coral

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military